USAGE.txt

          Team Red Miner version 0.8.1.1
Usage: teamredminer [OPTIONS]
Options:
  -a, --algo=ALGORITHM      Selects the mining algorithm.  Currently available:
                              ethash            (eth, etp, others)
                              etchash           (etc, alias for -a ethash --eth_variant_mode=etchash)
                              kawpow            (ravencoin)
                              lyra2z      
                              phi2              (lux, argoneum)
                              lyra2rev3         (vtc)
                              x16r        
                              x16rv2      
                              x16s              (pgn, xsh)
                              x16rt             (gin)
                              mtp               (zcoin)
                              cuckatoo31_grin   (grin)
                              cuckarood29_grin  (grin)
                              cnv8        
                              cnr               (old monero)
                              cnv8_half         (stellite, masari)
                              cnv8_dbl          (x-cash)
                              cnv8_rwz          (graft)
                              cnv8_trtl         (old turtlecoin, loki)
                              cnv8_upx2         (uplexa)
                              cn_heavy          (classic CN heavy)
                              cn_haven          (haven)
                              cn_saber          (bittube)
                              cn_conceal        (conceal)
                              trtl_chukwa       (turtlecoin)
                              trtl_chukwa2      (turtlecoin)
                              nimiq             (nimiq)

  -h, --help                Display this help message and exit.
      --debug               Enables debug log output.
      --disable_colors      Disables console output colors.
      --force_colors        Forces console color output even if the terminal does not seem to support them.
      --api_listen=IP:PORT  Enables the sgminer compatible api. IP:PORT is optional. If present, the IP:PORT combo
                              decides the interface(s) and port to listen to. Default is 127.0.0.1:4028. For
                              external access, use e.g. 0.0.0.0:4028. It's also valid to only specify the
                              port, e.g. 4029.
      --cm_api_listen=IP:PORT Enables the claymore compatible api. IP:PORT is optional. If present, the IP:PORT combo
                              decides the interface(s) and port to listen to. Default is 127.0.0.1:3333. For
                              external access, use e.g. 0.0.0.0:3333. It's also valid to only specify the
                              port, e.g. 3334.
      --cm_api_password=PSW Sets the required password for the CM compatible api interface.
      --log_file(=FILENAME) Enables logging of miner output into the file specified by FILENAME.  If no filename
                              is provided, the miner will log to trm_<algo>_<yyyymmdd_hhmmss>.log in the current
                              working directory.  If the log file already exists, the miner will append.
  -l, --log_interval=SEC    Set the time interval in seconds for averaging and printing GPU hashrates.
                              SEC sets the interval in seconds, and must be > 0.
      --log_rotate=SZ[,CNT] Enables log rotation. The SZ value sets the log size after which a new log file will be
                              created.  The SZ value supports the suffixes 'k', 'M', and 'G' and will multiply the
                              value by 1024, 1048576, and 1073741824 respectively. The optional CNT value sets the 
                              maximum number of old log files to keep.  For example the option '--log_rotate=4M,16'
                              will cause the miner to switch to a new log file once the current log file exceeds 
                              4194304 bytes in size, and the miner will keep the last 16 such files and delete 
                              older ones.
      --short_stats         Disables the full gpu state output in each hashrate output, like it was before 0.7.10.
      --dev_location=LOC    Selects a specific location for the dev fee connection. Only use this if you see
                              continuous dev fee connection issues reported by the miner. The connection
                              management normally works well in all locations. Available options are:
                              world     - Anywhere in the world except for mainland China.
                              cn        - Mainland China.
                              non-gcp   - Countries with blocked access to Google Services (e.g. Iran, Cuba).
      --enable_compute      (Windows only) Enables compute mode and disables crossfire on necessary gpus.
      --long_timestamps     Enables microsec timestamps in the logs instead of seconds only.
      --restart_gpus        (Windows only) Restarts all configured gpus before mining, i.e. disable+enable PCI device.
      --uac                 (Windows only) Enable privilege escalation when the miner runs tasks like restarting gpus.
                              You can always avoid this by running the miner directly as Administrator.  This will
                              trigger the standard Windows escalation prompt, so you have to be available to click 'Yes'.
                              If this is not enabled, tasks that require Administrator privileges will fail when the
                              miner is running under a basic user account.
      --high_score          Enables printouts of the top 15 shares found since miner start in the stats output.
                              Note: this might not be enabled for all algos.
      --allow_dup_bus_ids   Allows multiple gpus using the same pci bus id.  This should only be used for Radeon Pro Duo
                              cards and similar hardware, it's normally an indication of a broken OpenCL environment.

Pool config options:
  -o, --url=URL             Sets the pool URL.  Currently stratum+tcp and stratum+ssl URLs are supported.
                              Each additional time this option is specified will start a new pool config.
                              Per-pool options (such as -u, -p) will need to be explicitly specified
                              again for each new pool.  (See the example start_multipool.sh/bat file)
                              The multi-pool strategy for the miner is set with the --pool_strategy option.
  -u, --user=USERNAME       Sets the username for pool authorization.
  -p, --pass=PASSWORD       Sets the password for pool authorization.
      --pool_force_ensub    Forces an extranonce subscribe request for supported pools unknown to the miner.
      --pool_no_ensub       Prevent miner from sending extranonce subscribe request to the pool.
      --pool_broken_rpc     Tells the miner to only allow a single outstanding rpc request on the pool
                              connection.  This is a work-around for pools that violate the json rpc
                              specification regarding rpc IDs.
      --pool_ratio=RATIO    Sets the hashrate ratio between pools when using multiple pools with the the 
                              'load_balance' or 'quota' pool strategies (see --pool_strategy).  By default all
                              pools use the ratio value 1.  For example, using this option with a value of 2 on 
                              just one pool will make that pool receive twice the hashrate as the other pools 
                              since their ratio will still be the default value of 1.
      --pool_debug          Logs all pool traffic.

Global pool options:
      --pool_connect_TO=SEC Set the time-out for attempting to connect to a pool. SEC is the time to wait in
                              seconds. Default is 10.
      --pool_rpc_TO=SEC     Set how long the miner will wait for an unanswered RPC to the pool.  After this
                              time, the miner will reconnect to the pool.  SEC is the time to wait in seconds.
                              Default is 60.
      --pool_max_rejects=N  If a pool rejects N shares in a row, the pool connection is reset. This is to prevent
                              against pools that invalidates mining sessions without disconnecting the user.
                              Default value is 5.
      --pool_share_limit_ms=N  If a pool takes longer than N ms to accept or reject a share, kill the current
                              connection and reconnect.  This is intended for pools that often get issues with
                              some of their servers, but reconnecting means being load-balanced to a different and
                              hopefully better server.  Default value is no timeout.
      --pool_strategy=STRAT Sets the strategy for selecting pools when running with multiple pools.  The available
                              values are: priority, load_balance, quota, and min_epoch.  The default is priority. 
                              priority: The miner will use pools in the order they are listed, only moving on 
                                to the next pool if the previous cannot establish a connection. 
                              load_balance: The miner will evenly balance the hashrate across all currently
                                connected pools.  The ratio of hashrate between pools can be set with --pool_ratio.
                              quota: The miner will evenly balance the total hashes completed across 
                                all pools.  If a pool disconnects and later reconnects, the miner will move 
                                hashrate to the pool until the total hashes for each pool is balanced. 
                                The ratio of hashrate between pools can be set with --pool_ratio.
                              min_epoch: ETH + ZIL switching strategy.  The miner will always mine the lowest epoch
                                among all connected pools, and in case of a tie, the first connected pool.
                                Therefore, specify your ETH mining pool as the first/primary pool, then the ZIL pool
                                as the second pool.  You can also use 'eth_zil' as the name for this strategy.
      --no_ntime_roll       Prevents the miner from rolling ntime in the block header, only using the value
                              provided by the pool. This needs to be enabled for some pools when mining x16rt.
      --no_stale_submit     Prevents the miner from submitting shares that are not for the most current pool job.

GPU options:
      --platform=INDEX      Sets the index of the OpenCL platform to use. If not specified, platform will
                              be auto-detected. Linux with multiple platforms is only supported using no
                              --platform arg but instead adding --bus_reorder.
  -d, --devices=DEVLIST     Sets gpu devices to use from detected list. DEVLIST should be a comma-
                              separated list of device indices, e.g. -d 0,1,2,4.  If not specified, all
                              devices on the platform(s) will be used.  NOTE: by default the devices are ordered
                              by pcie bus ordering. Use --list_devices to show indices.
      --init_style=1/2/3    Specified the init style (1 is default):
                              1: One gpu at the time, complete all before mining.
                              2: Three gpus at the time, complete all before mining.
                              3: All gpus in parallel, start mining immediately.
      --pcie_fmt=FORMAT     Sets print format for pcie bus numbers.  The accepted values for FORMAT are
                              either 'hex' or 'dec'.  The default is dec for windows and hex for linux.
      --bus_reorder         Reorders the detected or specified devices after their pcie bus id.  If no
                              platform is specified, devices will be collected from all detected AMD OpenCL
                              platforms.  Note: As of version v0.7.0 this is the default behavior.
      --opencl_order        Orders the detected or specified devices in the order OpenCL presents them.
      --list_devices        Lists the available devices for the detected or specified platform and exits
                              immediately.  Bus reordering will be implemented in the displayed order.
      --nr_cu_override=X,Y,... Overrides the nr compute units per gpu as presented by the OpenCL API. This
                              is primarily useful for Vega 64s flashed with 56 biosed and where the driver is
                              reporting 56 CU instead of the true count.  Provide a comma-separated list of the
                              override CU count per gpu as value for the argument.  You can skip gpus and do not
                              need to provide values for all gpus in the rig.  Example for a mixed rig of two Vegas
                              at index 1 and 3 and two other gpus: --nr_cu_override=,64,,64.  You can verify your
                              argument by also adding --list_devices before mining.

Fan control options (BETA feature):
      --fan_control(=CFG1,CFG2,...)  This argument enables gpu fan control by the miner.  TRM supports
                              auto-adjusting the gpu fan speed(s) based on core, junction and/or mem temp.
                              We also support setting a static fan speed in percent.

                              Each gpu type has a fan configuration that will be used by default.  We support
                              both overriding the default configuration per gpu type as well as setting a
                              specific config per gpu in the rig.

                              A fan config consists of (max) six values, separate by the ':' (colon) char.  The values
                              are: core target temp, junction target temp, mem target temp, initial fan speed in
                              percent, min fan speed in percent, max fan speed in percent.  Any value can be left empty.
                              These are a few examples:
                              ::70:50:25   Target mem temp to 70C, start fan at 50% speed, min fan speed 25%.
                              55::::20:80  Target core temp to 55C, start fan at default configuration's speed,
                                           always keep fan between 20% and 80%.
                              55::75:80    Adjust fan so that core temp is <= 55C and mem temp is <= 75C, start
                                           fan at 80%.
                              :::100       Set static fan speed to 100%, never adjust based on temps.

                              The fan configuration used for a gpu is derived in the following precedence order:
                              1. The --fan_control argument was passed a list of configurations and included an
                                 entry for gpu X.
                              2. The default fan configuration for this gpu type was overridden with a
                                 --fan_default_<type>=... parameter.
                              3. Use the built-in default fan configuration for this gpu type.

                              In the list above, if the chosen configuration is missing the start value for the fan
                              the setting from the next configuration is used.

                              NOTE: fan support is a beta feature and will not work better than the support the
                              drivers provide.  For example, many times the drivers under linux don't allow forcing a
                              fan to 100% using the sysfs pwm support.

      --fan_default_polaris=CFG Set the default config used for all Polaris gpus (450/460/550/560/470/480/570/580/590).
                              The built-in default is 55:::50 for 55C core temp and fan starting at 50%.
      --fan_default_vega=CFG    Set the default config used for all Vega gpus (Vega 56/Vega 64).
                              The built-in default is 55::70:50 for 55C core temp, 70C mem temp and fan at 50%.
      --fan_default_vega2=CFG   Set the default config used for all Radeon VII gpus.
                              The built-in default is 70::75:80 for 70C core temp, 75C mem temp and fan at 80%.
      --fan_default_navi=CFG    Set the default config used for all Navi (Navi10).
                              The built-in default is 60::80:70 for 60C core temp, 80C mem temp and fan at 70%.
      --fan_default_big_navi=CFG  Set the default config used for all Big Navi (Navi21).
                              The built-in default is 50:::70 for 50C core temp and fan at 70%. The reason for
                              not including mem temp is a missing sensor in the Windows ADL library.
      --fan_debug               Enable log printouts related to adjustments.

Watchdog options:
      --no_gpu_monitor      Disables the ADL (Windows) or sysfs (Linux) GPU monitor for temperature and
                              fan speed.
      --temp_limit=TEMP     Sets the temperature at which the miner will stop GPUs that are too hot.
                              Default is 85C.
      --temp_resume=TEMP    Sets the temperature below which the miner will resume GPUs that were previously
                              stopped due to temperature exceeding limit.  Default is 60C.
      --watchdog_script(=X) Configures the gpu watchdog to shut down the miner and run the specified platform
                              and exits immediately. The default script is watchdog.bat/watchdog.sh in the
                              current directory, but a different script can be provided as an optional argument,
                              potentially with a absolute or relative path as well.
      --watchdog_test       Tests the configured watchdog script by triggering the same action as a dead gpu
                              after ~20 secs of mining.
      --watchdog_disabled   Forces the watchdog to not execute. Can be used to disable the watchdog in mining os
                              that always run with the watchdog enabled.

Ethash options:
      --eth_config=CONFIG   Manual ethash configuration for the miner.  CONFIG must be in the form [M][L].
                              The [M] value selects the mode which can be 'A','B', or 'C'.
                              The 'B' mode uses additional memory and will only work on 8+GB cards.
                              The 'C' mode uses additional memory and will only work on 16+GB cards, such as the VII, with 
                              a correctly configured system.  See the ETHASH_TUNING_GUIDE.txt for more details.
                              The [L] value selects the intensity and it's range will depend on the GPU architecture.
                              Both values are optional, but if [L] is specified, [M] must also be specified.
                              Example configs: --eth_config=A
                                               --eth_config=B750
                              CONFIG can also be a comma separated list of config values where each is
                              applied to each GPU. For example: --eth_config=A,B750,,A288
                              Any gpu that does not have a specific config in the list will use the first
                              config in the list.
      --eth_variant_mode=X  This argument controls activation of the ethash changes for ETC from epoch 390 as described
                              in ecip-1099. The following modes are available:
                              pool      - Default mode. Only activates if the pool sends an algo flag containing etchash.
                                          Once this flag is seen, all pool jobs will be assumed to be etchash unless another.
                                          algo flag containing ethash is received.
                              etchash   - Etchash mode. Epoch >= 390 will be assumed to be etchash, lower epochs ethash. Pool
                                          algo flags are not used.
                              deduce    - Ignore pool algo flags and only apply a heuristics based on the current system time
                                          and known heights and times for ETC and ETH. This mode should work as a generic
                                          approach when ETH reaches epoch 390 in Jan 2021. The system clock needs to be correct.
                                          It should also handle any profit switching setups that switch freely between ethash and
                                          etchash jobs by proxying underlying pools.
                              auto      - As long as the pool hasn't passed an algo flag, use deduce mode. When an algo flag
                                          is seen, switch to pool mode.
                              ethash    - Forced ethash mode. Never apply ecip-1099.
                              force_etc - Forced etchash mode. Always apply ecip-1099 rules. Use for ETC testnet mining.
      --eth_aggr_mode       Enables automatic use of the 'B' mode for all Polaris 8GB cards, unless they have a
                              different config provided by the --eth_config argument.  This is the same thing as 
                              manually setting all Polaris 8GB gpus in the rig to 'B' mode using --eth_config.
                              For most gpus, this adds 0.1-0.2 MH/s of hashrate.  NOTE: 20-25% of rigs becomes less
                              stable in this mode which is the reason it isn't the default mode.  If you experience
                              dead gpus, you should remove this argument and run the gpus in the 'A' mode. 
      --eth_stratum_mode=MODE Sets a fixed stratum mode for ethash pools.  By default the miner will attempt
                              to automatically determine the type of stratum the pool supports and use that mode.
                              This automatic detection can be overriden by specifying this option.  The MODE can be
                              set to one of the following options: stratum, nicehash, ethproxy. 
      --eth_worker          Set the worker id that will be sent to pool.  This only applies to pools with ethproxy
                              stratum mode.
      --eth_epoch           Tests a specific ethash epoch. NOTE: you still need to provide a pool as if you were mining,
                              but no shares will be submitted. Simulated mining only.
      --eth_alloc_epoch=N   Allocates enough memory for the given epoch from the start.  The miner will try to allocate more
                              if it needs to later during mining.  It's recommended for rigs with one or more 4GB cards to test
                              and set this to the max possible value to avoid reallocations at epoch switches.  Optimal Linux
                              rigs should be able to handle epoch 380, Windows rigs a little less (373-374).
      --eth_dag_buf=X,Y,... The miner can allocate a single or dual buffers for the DAG.  For now, the default is DUAL buffers, which
                              matches the behavior in all recent TRM releases.  However, a single buffer is slightly better, leading
                              to a small power save for all gpu types.  Only recent drivers support single large allocations larger
                              than 4GiB, typically from Adrenalin 20.9.1 and amdgpu-pro 20.x. The miner can automatically use single
                              buffer mode when possible using this argument, as well a force single or dual buffers per gpu.
                              Supported values are A(uto), S(ingle), D(ual).  You can enumerate a comma-separated list for all gpus
                              in the rig, or a single value for all gpus.  A gpu that does not have a value in the comma-separated list
                              will use the first value.  Hence, to enable auto mode for all gpus, pass --eth_dag_buf=A
                              NOTE: 4GB gpus will be forced to use dual buffers. 
      --eth_big_mode_adjust=X,Y,...  When using B- or C-modes, the miner runs better the more vram it can allocate.  Unfortunately the
                              drivers aren't accurate reporting how much memory it's possible to allocate, especially on Windows.
                              The miner will use a safe conservative number of 256MiB (Linux) and 512MiB (Windows) as an offset from
                              the available vram size.  If you want change this number, you can do so using this argument by providing.
                              a comma-separated list with values for one or more gpus.  Values for gpus not running B/C-mode will be
                              ignored.  If a gpu doesn't have a value in the list, the first provided value is used instead.
                              The allowed interval is [-64, 2048]. The higher number, the less vram is allocated on the gpu.
      --eth_4g_max_alloc=X,Y,...  This argument allows mining on 4GB gpus after they no longer can store the full DAG in vram.
                              You pass either the max epoch to allocate memory for, or the raw nr of MB to allocate.  You can
                              provide a single value that applies to all 4GB gpus in the rig, or use a comma-separated list for
                              specifying different values per gpu.  Values for non-4GB gpus are ignored.
      --eth_dag_slowdown=N  Slows down the DAG generation.  Pass a single digit 0-9. 0 means no slowdown (<= 0.7.9 behavior),
                              1 means minimal slowdown, 9 means max.  Default value: 4 for a slight slowdown.
      --eth_stagger         Enables staggering of gpus when building a new DAG.  This is more lean on PSUs that don't like
                              going from 0-100% load on all gpus at the same time. 
      --eth_no_stagger      Disables --eth_stagger.  Already the default behavior from 0.7.18.  Argument kept for backwards
                              compatibility only.
      --eth_ramp_up         Adds ramping up the intensity on all gpus after a DAG build, gpu disable/enable or network outage.
                              Can help rigs with crashes right between the DAG build and starting mining.
      --eth_no_ramp_up      Disables --eth_ramp_up.  Already the default behavior from 0.7.18.  Argument kept for backwards
                              compatibility only.
      --eth_direct_abort    Uses a different mechanism to abort ongoing gpu jobs.  Recommended for Vegas in ROCm environments
                              to minimize stale shares.  Will apply to Vega and Polaris gpus in the rig only. 
      --eth_dag_alloc_patch Some motherboards with outdated bios can see hw errs typically on the first or last gpu in the system.
                              Use this argument to force a patched dag allocation strategy that most often solves the issue.
                              Upgrading your bios often solves the issue as well.
      --eth_hashwatch(=M,M) Defines a min/max watchdog hashrate in MH/s expected when gpus are hashing.  If a GPU falls outside
                              of this range for too long it will be considered faulty and the watchdog will be triggered.  The
                              default min/max values are 2 MH/s and 150 MH/s.  To activate with default values, use
                              --eth_hashwatch.  To set your own values, use e.g. --eth_hashwatch=1.25,60.  The same range is used
                              for all gpus in the rig.  A negative value for one side disables it, e.g. use --eth_hashwatch=-1,1000
                              to handle gpu resets that result in huge fake hashrates but no minimum check.
      --eth_dag_cache(=EPOCH) Enables saving eth DAGs from jobs with different epochs to prevent having to rebuild them in the
                              future if jobs with the old epochs are received again.  At most one DAG will be saved if GPU memory 
                              space allows.  This is useful for switching pools such as eth+zil mining.  If you want to prebuild a
                              certain epoch immediately at startup, add the optional value. Eth+zil switching miners should use
                              --eth_dag_cache=0.  Only ethash (and not etchash) epochs can be prebuilt at this time.
      --eth_dag_cache_resv=MEM  Sets the amount of GPU memory the miner will attempt to leave unused when running with DAG caching
                              enabled (see --eth_dag_cache).  The argument MEM is the amount of memory to leave unused in
                              mebibytes.  The default value is 256.
      --eth_dag_cache_verify    Enable dag cache read and verification after a finished dag build.  This will detect situations
                              where the dag cache had bit errors and the resulting dag is partially broken.  We have seen this
                              happen increasingly on Vegas as the dag has grown bigger.  When detected, a new buffer will be
                              allocated for the dag cache and the dag build restarted.

Progpow options:
      --prog_config=CONFIG  Manual progpow configuration for the miner.  CONFIG must be in the form [M][L].
                              The [M] value selects the mode which can be either 'A' or 'B'.
                              The 'B' mode typically results in better performance but is only available for
                              Vega on linux and Navi (linux or windows).
                              The [L] value selects the intensity and it's range will depend on the GPU architecture.
                              Both values are optional, but if [L] is specified, [M] must also be specified.
                              Example configs: --prog_config=A
                                               --prog_config=B750
                              CONFIG can also be a comma separated list of config values where each is
                              applied to each GPU. For example: --prog_config=A,B750,,A288
                              Any gpu that does not have a specific config in the list will use the first.
      --prog_height=VALUE   Sets a fixed block height for progpow algorithms for benchmarking purposes.
                              Note that using this option needs a pool connection but will not submit shares.
      --prog_strict         Forces miner to always generate strictly accurate kernels.  By default the miner will
                              generate relaxed kernels that use less computation power but can result in 
                              occasional invalid shares.
      --prog_dag_slowdown=N  Slows down the DAG generation.  Pass a single digit 0-9.  0 means no slowdown (<= 0.7.9 behavior),
                              1 means minimal slowdown, 9 means max.  Default value: 4 for a slight slowdown.
      --prog_stagger         See --eth_stagger.
      --prog_ramp_up         See --eth_ramp_up.
      --prog_no_stagger      See --eth_no_stagger.
      --prog_no_ramp_up      See --eth_no_ramp_up.

Cryptonight options:
      --rig_id              Set the rig identifier that will be sent to the pool. This is only used for
                              cryptonight pools.
      --cn_config=CONFIG    Manual cryptonight configuration for the miner.  CONFIG must be in the form
                              [P][I0][M][I1][:xyz], where [P] is an optional prefix and [:xyz] is an
                              optional suffix.  For [P], only the value of 'L' is supported for low-end
                              GPUs like Lexa/Baffin.  [I0] and [I1] are the thread intensity values normally
                              ranging from 1 to 16, but larger values are possible for 16GB gpus.  [M] is the
                              mode which can be either '.', -', '+' or '*'.  Mode '.' means that the miner
                              should choose or scan for the best mode.  Mode '*' both a good default more and
                              _should_ be used if you mine on a Vega 56/64 with modded mem timings.  The
                              exceptions to this rule are small pad variants (cnv8_trtl and cnv8_upx2), they
                              should still use '+'. For Polaris gpus, only the '-' and '+' modes are available.
                              
                              NOTE: in TRM 0.5.0 auto-tuning functionality was added, making manual configuration
                              of the CN config modes unnecessary except for rare corner cases.  For more info, 
                              see the tuning docs and how-to documents bundled with the release. 
                              
                              Example configs: --cn_config=15*15:AAA
                                               --cn_config=14-14
                                               --cn_config=L4+3
                              CONFIG can also be a comma separated list of config values where each is
                              applied to each GPU. For example: --cn_config=8-8,16+14:CBB,15*15,14-14
                              Any gpu that does not have a specific config in the list will use the first
                              config in the list.
      --no_cpu_check        Disables cpu verification of found shares before they are submitted to the pool.
                              Note: only CN algos currently supports cpu verification.
      --no_lean             Disables the CN lean mode where ramp up threads slowly on start or restart after
                              network issues or gpu temp throttling. 
      --no_interleave=DEVS  Lists gpu devices where CN thread interleave logic should be not be used. 
                              The argument is a comma-separated list of devices like for the -d option. 
                              Use this argument if some device(s) get a worse hashrate together with a lot
                              of interleave adjust log messages. 
      --alloc_patch=DEVS    Lists gpu devices that loses hashrate between TRM v0.4.5 and later versions. With this 
                              argument a simpler mem allocation strategy is used, and the old (higher) hashrate should
                              be restored. Auto-tuning mode can still be used.
      --auto_tune=MODE      Enable the auto-tune mode upon startup. Only available for CN variants. MODE must 
                              be either NONE, QUICK or SCAN. The QUICK mode checks a few known good configurations
                              and completes within 1 min. The SCAN mode will check all possible combos and will
                              run for 20-30 mins. Setting MODE to NONE disable the auto-tune feature. The default
                              mode is QUICK. 
      --auto_tune_runs(=N)  Executes multiple runs for the auto tune, each time decreasing the unit of pads used -1
                              in one of the threads (15+15 -> 15+14 -> 14+14 -> 14+13 -> ...). You can specify the
                              explicit nr of runs or let the miner choose a default value per gpu type (typically 3-4).
      --auto_tune_exit      If present, the miner will exit after completing the auto-tuning process. This is helpful
                              when you want to scan for optimal settings and then use the resulting command line arg
                              printed by the miner.
      --allow_large_alloc   If present, and when the driver indicates there is enough GPU vram available, the miner
                              will be more aggressive with the initial memory allocation. In practice, this option
                              means that Vega GPUs under Linux will start the auto-tuning process at 16*15 rather
                              than 16*14 or 15*15.

MTP options:
      --allow_all_devices   Some algos can't be mined on e.g. 4GB gpus. Those gpus will be disabled automatically
                              by the miner. This argument overrides this logic and allows mining on all specified
                              or detected devices.

X16* options:
      --hash_order=VALUE    Sets a fixed hash order for algorithms like x16r for benchmarking purposes.
                              Note that using this option needs a pool connection but will not submit shares.
                              The standard benchmark hash order for x16r is --hash_order=0123456789abcdef.
Nimiq options:
      --nimiq_worker=VALUE  Sets the worker/device name for nimiq to pass to the pool(s).
      --nimiq_no_proxy      Disables the automatic Nimiq proxy executed as a separate process. This means that the
                              host and port passed to the miner must be pointing to a proxy.
      --nimiq_proxy=VALUE   Overrides the default path to the Nimiq proxy. The default is trm_nimiq_proxy-win.exe.
                              and trm_nimiq_proxy-linux in the current miner director.
      --nimiq_port=VALUE    Overrides the default local port (4444) used for the Nimiq proxy. This can be used if your
                              system is already using port 4444 for some other tcp/ip service.