diff --git a/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Connection.h b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Connection.h
new file mode 100644
index 0000000..5470f64
--- /dev/null
+++ b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Connection.h
@@ -0,0 +1,20 @@
+WiFiClient net;
+CoreX corex;
+
+void setupCorex() {
+  Serial.println("CoreX IoT https://corex.id");
+  Serial.println("Menghubungkan ke WiFi");
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print(".");
+    delay(1000);
+  }
+
+  Serial.println("\nTerhubung ke WiFi!");
+  Serial.print("Menghubungkan ke server");
+  while (!corex.connect()) {
+    Serial.print(".");
+    delay(1000);
+  }
+
+  Serial.println("\nTerhubung ke server!");
+}
\ No newline at end of file
diff --git a/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.ino b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.ino
new file mode 100644
index 0000000..a28d0b2
--- /dev/null
+++ b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.ino
@@ -0,0 +1,50 @@
+#include <CoreX.h>
+#include "Connection.h"
+#include <Wire.h>
+#include "HX711.h"
+
+const int LOADCELL_DOUT_PIN = 13;
+const int LOADCELL_SCK_PIN = 12;
+
+HX711 scale;
+
+// Ubah nilai auth_token dan device anda.
+const char* AUTH_TOKEN = "Syt2vaJ2EPh14p0";
+const char* DEVICE_ID = "5TTi2vTpQ";
+
+CoreXTimer timer;  // Gunakan timer agar dapat mengeksekusi perintah setiap sekian milidetik tanpa blocking.
+
+// Ubah nilai berikut sesuai jaringan Anda.
+const char ssid[] = "Wokwi-GUEST";
+const char pass[] = "";
+
+void setup() {
+  Serial.begin(115200);
+  WiFi.begin(ssid, pass);
+  scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
+  scale.set_scale(230);  // Set the scale factor
+  scale.tare();          // Reset the scale
+  corex.begin(net);
+  timer.setInterval(1000, send);  // Lakukan send setiap 1000 milidetik.
+  setupCorex();
+}
+
+void loop() {
+  timer.run();
+  delay(10);
+  // Periksa apakah perangkat masih terhubung.
+  if (!corex.connected()) {
+    setupCorex();
+  }
+}
+
+void send() {
+  float weight = scale.get_units(10);
+  Serial.print("Weight: ");
+  Serial.println(weight, 1);
+  scale.power_down(); // set ADC to sleep mode
+  delay(1000); 
+  scale.power_up();
+  int weightInt = static_cast<int>(weight);
+  corex.send("UNASTFMeb1st", weightInt);
+}
\ No newline at end of file
diff --git a/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Wiring_MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.png b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Wiring_MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.png
new file mode 100644
index 0000000..de2846a
Binary files /dev/null and b/MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell/Wiring_MenampilkanNilaiBeratTimbanganMenggunakan_HX711_LoadCell.png differ