Manufacturer not shown on ntfy

[maghuro]

Ntfy notification:

⚠️ POWER FAILURE DETECTED! UPS eaton@10.0.0.6 is now running on battery power.

📱 DEVICE INFO:
  Model: Ellipse ECO 1200
  Serial: 0.0
  Location: Unknown
  Firmware: Unknown
  Manufacturer: Unknown

🔋 BATTERY INFO:
  Charge: 100.0%

📅 EVENT INFO:
  Date: 2026-01-23
  Time: 17:18:11


⏰ Last update: 2026-01-23 17:18:00
Fri Jan 23 17:18:11 GMT+00:00 2026

upsc dump:

battery.charge: 100
battery.charge.low: 20
battery.runtime: 3000
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse ECO 1200
device.serial: 000000000
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.state: quiet
driver.version: 2.8.1
driver.version.data: MGE HID 1.46
driver.version.internal: 0.52
driver.version.usb: libusb-1.0.27 (API: 0x100010a)
input.transfer.high: 284
input.transfer.low: 161
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 2
outlet.1.status: on
outlet.1.switchable: no
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 3
outlet.2.status: on
outlet.2.switchable: no
outlet.desc: Main Outlet
outlet.id: 1
outlet.power: 25
outlet.switchable: no
output.frequency.nominal: 50
output.voltage: 220.0
output.voltage.nominal: 220
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 02
ups.load: 9
ups.mfr: EATON
ups.model: Ellipse ECO 1200
ups.power.nominal: 1200
ups.productid: ffff
ups.realpower: 86
ups.serial: 000000000
ups.status: OL
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 0463

Also, location is empty and I don't know where to set it.