UI - GF/SF indicator for Enabled in the list

[JimB40]

Is there an existing issue for this feature request?

• I have searched the existing issues

Is your feature request related to a problem?

Currently when GF/SF is enabled there is indicator on the list showing it's ON
However it looks like editable/touchable Checkbox UI element which is not.

Describe the solution you'd like

It can be simple dot as in MODEL/TELEMETRY sensor line.
or filled square but without frame that suggest it's checkbox.

Describe alternatives you've considered

No response

Additional context

No response

[philmoz]

The checkbox (currently only used in the pre-flight checklist) looks like this:

Nothing like the SF/GF indicator.

[JimB40]

Quite close visually. Anything that is not looking as UI touchable element will do the job.
What about small icon

[philmoz]

I'm not sure a power on/off icon is a good indicator of enabled/disabled state.

[JimB40]

So we may go reversed UI scheme as it seems more intuitive.

1. By default when creating SF/GF it is 'enabled'.

• It's bit annyoug you have to enable it while you decided to create one.
• some of GF/SF features have no option to be disabled (always enabled) - ongoing Add missing Enable switch to SF/GF functions #3024

2. ON/OFF Label says 'Disabled'
3. This kind of small icon shows when GF/SF is disabled
   

Users report they want sets of same SF for every model (copy/paste) but to be able to disable them for particular model.
This is also true for dev/testing as I want often my screenshot feature to be available only when i'm testing, while I'd like it to be copied with every new model.

[philmoz]

So we may go reversed UI scheme as it seems more intuitive.

1. By default when creating SF/GF it is 'enabled'.

• It's bit annyoug you have to enable it while you decided to create one.

2. ON/OFF Label says 'Disabled'

So you want to reverse the meaning of the enabled/disabled flag and break every configured SF/GF in existence (that can be disabled).

Users report they want sets of same SF for every model (copy/paste) but to be able to disable them for particular model. This is also true for dev/testing as I want often my screenshot feature to be available only when i'm testing, while I'd like it to be copied with every new model.

Expanding the scope with unrelated issues is a good way to ensure the issue never gets implemented and closed. Especially if you aren't going to bother suggesting solutions. In this case there are at least three ways to achieve the result (copy an existing model, use model templates, or write a lua script to set defaults).

3. This kind of small icon shows when GF/SF is disabled
   

Since not all SF/GF functions can be disabled there should also be an icon for when it is enabled.

[philmoz]

To get this issue back on topic, you don't like the current enabled/disabled indicator for the SF/GF list display.

Please provide PNG images for an alternative look for both the enabled / disabled states that everyone can agree on.
It would also be worthwhile showing the results in context (modified radio screenshots) so reviewers can get a sense of how it will look in use.
There are three cases to consider - SF/GF active and enabled, SF/GF inactive and enabled, SF/GF disabled.

[JimB40]

So you want to reverse the meaning of the enabled/disabled flag and break every configured SF/GF in existence (that can be disabled).

Little bit more faith in my team cooperation skills. Last thing I want is flood of issues due to a 'you broke legacy and we need to reprogram our models/radio".

First of all let me know what is status of adding GF/SF Enable/Disable to all functions
I've read initial #3024
then #2145 & #3038 & #3601 & #3696
but still not sure what is finished and if there is ongiong work that holds merging

AFAIU after reading to fininsh we need

1. Proper config var in radio.yml for GF - seems like finished
2. Proper config var in model.yml for SF - seems like finished
3. UI changes in B&W firmware - seems like finished
4. UI changes in COLOR firmware - ???
5. UI changes in Companion - seems like finished

So @pfeerick @eshifri @elecpower what is crurrent status?

[JimB40]

So first things first.
We agreed on:

• adding enable/disable feature to every function in GF/SF
• that default state of any newly created GF/SF is 'enabled'

1. BW firmware & Companion
   In this cases we have one level UI that serves both for GF/SF status and allows to edit it (sometimes called in-line editing)

Then checkbox is proper way to inform about if featur is enabled or disabled as anything else would be confusing.
BTW I'd change column label naming from 'Enable' to 'Enabled'

2. COLOR firmware
   In this case we have two level UI

• first (LIST) is to inform about status
  

• second (EDIT screen) is to change actual values of GF/SF
  

CONCEPT

GF/SF EDIT screen
I'm scratching any further discussion about changing labels as this will open Pandora Box :)

• Label stays as it is (with the same comment that 'Enabled' is better than 'Enable'
• When new GF/SF is created 'Enabled' feature is always ON to avoid situation user doesn't know why 'this is not woring'

GF/SF LIST
Here we only have to inform user about status/configuration of GF/SF
'Enabled' is default state. As a rule of thumb if something is default there is no need to display anything (reducing amount of information user recieives)

In above screen

• Every single GF is 'Enabled'
• GF1 is focused
• GF1, GF2 & GF4 are 'Active' that means Functon condition is true

Now exception is 'Disabled' so we only inform in this case.
When troubleshooting why GF/SF doesn't work most important is to visually indicate 'Disabled' items

in above screen

• GF3, GF5 are disabled - showed two different icons we may use (GF/SF is kind of paused state)
• of course GF3, GF5 never turns 'Active' (yellow)

[philmoz]

• that default state of any newly created GF/SF is 'enabled'

Absolutely not.

SF/GF exists as soon as it is created.
If it defaults to enabled then it will be processed as soon as you start putting in parameters which could have unintended consequences.

[JimB40]

Every time SF is created 'Function' is set to 'Ovverride', and when GF is created 'Function is set to 'Trainer'
I think what you mean is that 'Trigger' is not set '---' so SF/GF is not working
Still valid to display icon to show this line (GF/SF) is not working.

[3djc]

What he means is that the function is running as soon as created (created, NOT finalised), and while you select the values, it would actually run all the successive values to your final choice if defaulted enabled when created