v1.0.2.1 Beta

BETA

WIFI

• Wardriving
• WiFi sniffer
• WiFi deauther
• DOS Attack
• Analizer -> Save PCAPS in SD or flash
• Wireshark integration

BLE

• BLE sniffer
• BLE spammer
• BLE spoffing
• BLE trackers scanner (AirTags, Tile, etc)
• Wireshark integration

Zigbee

• Zigbee sniffer
• Zigbee spoofing (Switch End Device)
• Wardriving
• Wireshark integration

Thread

• Thread sniffer
• Thread broadcast

GPS

• GPS tracker
• Wardriving
• Wireshark integration

Matter

• Matter protocol support
• Matter CLI

Tools

• OTA Firmware Update
• GPS
• SD
• I2C Scanner
• UART2

Firmware test

Evaluates the behavior of:

• LEDs
• Buzzer
• Buttons
• SD Card
• Chip model
• GPS

Flash the firmware Beta

b. Windows: Press the Windows key and X to open a menu. Select Device Manager -> Ports (COM & LPT). The Minino port will appear as something like COM3.
Flash the firmware with the following command:

Important

Replace the {PORT} with your path to the board

1. Download and unzip build_files_1.0.3.0.zip
2. Open a terminal and navigate to the build_files folder
3. Find the serial port used by the Minino:
   a. Linux and Macos: Use the following command to list the current serial ports: ls /dev/tty* On Linux, the Minino port will appear as something like: ttyACM0 On macOs, it will appear as something like tty.devusmodem1
   b. Windows: Press the Window key and X to open a menu. Select Device Manager -> Ports (COM & LPT). The Minino port will appear as something like COM3
4. Flash the firmware with the following command:

python3 -m esptool --chip esp32c6 -b 460800  --port {PORT} --before default_reset --after hard_reset write_flash --flash_mode dio --flash_size 8MB --flash_freq 80m 0x0 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x15000 ota_data_initial.bin 0x20000 minino.bin

Flash the test firmware

1. Download and unzip test_build_files.zip
2. Open a terminal and navigate to the build_files folder
3. Find the serial port used by the Minino:
   a. Linux and Macos: Use the following command to list the current serial ports: ls /dev/tty* On Linux, the Minino port will appear as something like: ttyACM0 On macOs, it will appear as something like tty.devusmodem1
   b. Windows: Press the Window key and X to open a menu. Select Device Manager -> Ports (COM & LPT). The Minino port will appear as something like COM3
4. Flash the firmware with the following command:

python3 -m esptool --chip esp32c6 --port {PORT} -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 8MB 0x0 bootloader/bootloader.bin 0x10000 minino.bin 0x8000 partition_table/partition-table.bin

What's Changed

• Update README.md by @sabas1080 in #1

Full Changelog: v1.4...v1.0.3.0

First BETA

BETA

WIFI

• Wardriving
• WiFi sniffer
• WiFi deauther
• DOS Attack
• Analizer -> Save PCAPS in SD or flash
• Wireshark integration

BLE

• BLE sniffer

• BLE spammer

• BLE spoffing

• BLE trackers scanner (AirTags, Tile, etc)

• Wireshark integration

Zigbee

• Zigbee sniffer
• Zigbee spoofing (Switch End Device)
• Wardriving
• Wireshark integration

Thread

• Thread sniffer
• Thread broadcast
• GPS tracker
• Wardriving
• Wireshark integration

Matter

• Matter protocol support
• Matter CLI

Tools

• OTA Firmware Update
• GPS
• SD
• I2C Scanner
• UART2

Firmware test

Evaluates the behavior of:

• LEDs
• Buzzer
• Buttons
• SD Card

Flash the firmware

1. Download and unzip test_build_files.zip or build_files.zip
2. Flash the firmware with the following command:

esptool.py --chip esp32c6 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 bootloader/bootloader.bin 0x10000 minino.bin 0x8000 partition_table/partition-table.bin

Firmware test

Evaluates the behavior of:

• LEDs
• Buzzer
• Buttons
• SD Card

Flash the firmware

1. Download and unzip build_files.zip
2. Flash the firmware with the following command:

esptool.py --chip esp32c6 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 bootloader/bootloader.bin 0x10000 minino.bin 0x8000 partition_table/partition-table.bin

Replace $PORT with the actual port your Minino is connected to

v1.4

feat(hw): BOM updated

v1.3.0

This new version includes hardware and firmware changes.

Hardware

• Add GPS module
• Increase PCB size
• Remove central button
• Change buzzer from active to passive
• Change microcontroller from ESP32-S3-WROOM-1 to ESP32-C6-1U
• Add SD Card module

Firmware

• Add WiFi sniffing
• Add AirTags scanner
• Add Thread CLI

Update v1.2

Update Minino version, added Micro SD connector

V1.1

Add_Center_Button

v1.0

• New Minimo