SOFT "mode" / feature in new 2025 AUX devices - C-Smart Premium Crystal

[laborek]

So this is new feature / mode in 2025 aux devices
AC have perforated curtain and in this SOFT (is also dedicated buton on remote controler for that) mode this curtain is closed and fan is quiet... and cool air outs trough hundreds of small holes

Maybe it should be not on issues side but as a request... but kindly ask to add this mode/feature as a parameter ??
thanks in advance

Mike

[GrKoR]

Hey Mike,

You did everything right. All requests are placed here.

I can't add any features by description because I actually haven't new AUX air conditioner. If you have one you could collect necessary data and attach it here. It will help me to implement this functionality.

Here is the steps of how to get all needed data.

[laborek]

Hey
Thanks for input and some hints
I collected logs as u desicrbed... so I did two loging session just for sure :)
Please let me know that is all u need :)

regards

2025-07-27 13-12-54 log.csv
2025-07-27 13-04-40 log.csv

[amdydesign]

any progress?

[GrKoR]

@amdydesign not so fast, dude 🤗
I have very little time for hobbies.

[GrKoR]

@laborek
Hi Mike,

The data was reviewed, but no new parameters were found; all were already known. The only issue is how these parameters are used: they're being utilized in a non-standard way. Also, the logs are a bit fragmented, so more information is needed for analysis.
Could you please capture additional logs?

Please ensure the capture is not stopped rapidly. Allow commands to execute with 30-60 second pauses between them. For example:

1. Start log collection. Wait 30-60 sec.
2. Enable the AC with the IR remote. Wait another 30-60 sec.
3. Switch AC to Cool mode. Wait again.
4. Press the SOFT mode button (enable this mode). Wait 30-60 sec.
5. Press the SOFT mode button again (this should disable the mode). Wait 30-60 sec.
6. Disable AC. Wait 30-60 sec.
7. Enable AC with the IR remote. Wait 30-60 sec.
8. Enable SOFT mode again. Wait 30-60 sec.
9. Switch AC to a mode incompatible with SOFT mode. Wait 30-60 sec. Please specify which mode this was.
10. Disable AC. Wait again 30-60 sec.
11. Stop log capturing.

If these exact steps can be followed, there is no need to add any further comments (except for point 9). If the steps are impossible to perform (due to different modes or sequence of steps), please describe all the steps taken.

Your help is very appreciated.

[amdydesign]

I've made log on my C-Smart as you write above so here you go :)
ive made all steps (in step 9 I turn on DRY mode - SOFT mode goes off)

log.csv

[GrKoR]

Cool! Thank you @amdydesign .
Will dig into it soon.

[GrKoR]

@amdydesign and @laborek
Thank you guys! Guess I found it! (first bit of byte 18 in the 0x11 command)
Will implement this mode in upcoming release of the component.
Your partnership is very appreciated.

[amdydesign]

Any news? @GrKoR

[GrKoR]

@amdydesign , unfortunately, I have no time for the component. This task has high priority in my backlog. But the lack of free time is catching up with me.

[PaTara43]

ah, good luck with this feature abd a +1 to the request counter. Also got a nex AUX AC and trhrilled with the SOFT feature!

Она правда очень удобная, надеюсь, у Вас появится время для ее реализации. Проект - топ!

[amdydesign]

any news?