diff --git a/klippy/extras/hx71x.py b/klippy/extras/hx71x.py
index 00f62892c..5a329db02 100644
--- a/klippy/extras/hx71x.py
+++ b/klippy/extras/hx71x.py
@@ -25,12 +25,13 @@ def __init__(
         default_sample_rate,
         gain_options,
         default_gain,
+        sps_bits,
     ):
         self.printer = printer = config.get_printer()
         self.name = config.get_name().split()[-1]
         self.last_error_count = 0
-        self.consecutive_fails = 0
         self.sensor_type = sensor_type
+        self.consecutive_fails = 0
         # Chip options
         dout_pin_name = config.get("dout_pin")
         sclk_pin_name = config.get("sclk_pin")
@@ -50,6 +51,17 @@ def __init__(
         self.sps = config.getchoice(
             "sample_rate", sample_rate_options, default=default_sample_rate
         )
+        # HX71708 configures the sample rate instead of the gain/channel.
+        # We forward the sps bits to hx71x_read_adc so that it can read the extra bits required
+        if sensor_type == "hx71708":
+            self.gain_or_sps = 1
+            self.sps_bits = config.getchoice(
+                "sample_rate", sps_bits, default=default_sample_rate
+            )
+        else:
+            self.gain_or_sps = 0
+            self.sps_bits = 0
+
         # gain/channel choices
         self.gain_channel = int(
             config.getchoice("gain", gain_options, default=default_gain)
@@ -70,8 +82,15 @@ def __init__(
         # Command Configuration
         self.query_hx71x_cmd = None
         mcu.add_config_cmd(
-            "config_hx71x oid=%d gain_channel=%d dout_pin=%s sclk_pin=%s"
-            % (self.oid, self.gain_channel, self.dout_pin, self.sclk_pin)
+            "config_hx71x oid=%d gain_or_sps=%d sps_bits=%d gain_channel=%d dout_pin=%s sclk_pin=%s"
+            % (
+                self.oid,
+                self.gain_or_sps,
+                self.sps_bits,
+                self.gain_channel,
+                self.dout_pin,
+                self.sclk_pin,
+            )
         )
         mcu.add_config_cmd(
             "query_hx71x oid=%d rest_ticks=0" % (self.oid,), on_restart=True
@@ -179,6 +198,7 @@ def __init__(self, config):
             # HX711 gain/channel options
             {"A-128": 1, "B-32": 2, "A-64": 3},
             "A-128",
+            {},
         )
 
 
@@ -193,7 +213,23 @@ def __init__(self, config):
             # HX717 gain/channel options
             {"A-128": 1, "B-64": 2, "A-64": 3, "B-8": 4},
             "A-128",
+            {},
+        )
+
+
+class HX71708(HX71xBase):
+    def __init__(self, config):
+        super(HX71708, self).__init__(
+            config,
+            "hx71708",
+            # HX717 sps options
+            {320: 320, 80: 80, 20: 20, 10: 10},
+            320,
+            # HX717 gain/channel options
+            {"A-128": 1},
+            "A-128",
+            {320: 4, 3: 80, 20: 2, 10: 1},
         )
 
 
-HX71X_SENSOR_TYPES = {"hx711": HX711, "hx717": HX717}
+HX71X_SENSOR_TYPES = {"hx711": HX711, "hx717": HX717, "hx71708": HX71708}
diff --git a/src/sensor_hx71x.c b/src/sensor_hx71x.c
index f20d88072..a584cea02 100644
--- a/src/sensor_hx71x.c
+++ b/src/sensor_hx71x.c
@@ -17,6 +17,8 @@
 
 struct hx71x_adc {
     struct timer timer;
+    uint8_t gain_or_sps;
+    uint8_t sps_bits;
     uint8_t gain_channel;   // the gain+channel selection (1-4)
     uint8_t flags;
     uint32_t rest_ticks;
@@ -77,7 +79,7 @@ hx71x_delay(void)
 
 // Read 'num_bits' from the sensor
 static uint32_t
-hx71x_raw_read(struct gpio_in dout, struct gpio_out sclk, int num_bits)
+hx71x_raw_read(struct gpio_in dout, struct gpio_out sclk, uint_fast8_t num_bits)
 {
     uint32_t bits_read = 0;
     while (num_bits--) {
@@ -146,8 +148,15 @@ static void
 hx71x_read_adc(struct hx71x_adc *hx71x, uint8_t oid)
 {
     // Read from sensor
-    uint_fast8_t gain_channel = hx71x->gain_channel;
-    uint32_t adc = hx71x_raw_read(hx71x->dout, hx71x->sclk, 24 + gain_channel);
+    uint_fast8_t gain_or_sps = hx71x->gain_or_sps;
+
+    uint_fast8_t extra_bits;
+    if (gain_or_sps == 1) {
+        extra_bits = hx71x->sps_bits;
+    } else {
+        extra_bits = hx71x->gain_channel;
+    }
+    uint32_t adc = hx71x_raw_read(hx71x->dout, hx71x->sclk, 24u + extra_bits);
 
     // Clear pending flag (and note if an overflow occurred)
     irq_disable();
@@ -156,12 +165,12 @@ hx71x_read_adc(struct hx71x_adc *hx71x, uint8_t oid)
     irq_enable();
 
     // Extract report from raw data
-    uint32_t counts = adc >> gain_channel;
+    uint32_t counts = adc >> extra_bits;
     if (counts & 0x800000)
         counts |= 0xFF000000;
 
     // Check for errors
-    uint_fast8_t extras_mask = (1 << gain_channel) - 1;
+    uint_fast8_t extras_mask = (1 << extra_bits) - 1;
     if ((adc & extras_mask) != extras_mask) {
         // Transfer did not complete correctly
         hx71x->last_error = SAMPLE_ERROR_DESYNC;
@@ -186,17 +195,23 @@ command_config_hx71x(uint32_t *args)
     struct hx71x_adc *hx71x = oid_alloc(args[0]
                 , command_config_hx71x, sizeof(*hx71x));
     hx71x->timer.func = hx71x_event;
-    uint8_t gain_channel = args[1];
-    if (gain_channel < 1 || gain_channel > 4) {
+    uint8_t gain_or_sps = args[1];
+    uint8_t sps_bits = args[2];
+    uint8_t gain_channel = args[3];
+    if (gain_or_sps == 0 && (gain_channel < 1 || gain_channel > 4)) {
         shutdown("HX71x gain/channel out of range 1-4");
     }
+    if (gain_or_sps == 1 && (sps_bits < 1 || sps_bits > 4)) {
+        shutdown("HX71x sample_rate out of range 1-4");
+    }
+    hx71x->gain_or_sps = gain_or_sps;
+    hx71x->sps_bits = sps_bits;
     hx71x->gain_channel = gain_channel;
-    hx71x->dout = gpio_in_setup(args[2], 1);
-    hx71x->sclk = gpio_out_setup(args[3], 0);
+    hx71x->dout = gpio_in_setup(args[4], 1);
+    hx71x->sclk = gpio_out_setup(args[5], 0);
     gpio_out_write(hx71x->sclk, 1); // put chip in power down state
 }
-DECL_COMMAND(command_config_hx71x, "config_hx71x oid=%c gain_channel=%c"
-             " dout_pin=%u sclk_pin=%u");
+DECL_COMMAND(command_config_hx71x, "config_hx71x oid=%c gain_or_sps=%c sps_bits=%c gain_channel=%c"" dout_pin=%u sclk_pin=%u");
 
 // start/stop capturing ADC data
 void