Add hook to ensure we link to https://precice.org (precice#483)

Author: fsimonis

.pre-commit-config.yaml

@@ -42,3 +42,8 @@ repos:
       language: script
       entry: tools/check.sh
       pass_filenames: false
+    - id: check-links-to-precice
+      name: check links to precice.org
+      language: script
+      entry: tools/check-links-to-precice.sh
+      types_or: ["markdown", "html"]

flow-over-heated-plate-two-meshes/README.md

@@ -12,7 +12,7 @@ Get the [case files of this tutorial](https://github.com/precice/tutorials/tree/
 
 ## Setup
 
-The scenario is exactly the same as the one described in the [flow over heated plate tutorial](http://precice.org/tutorials-flow-over-heated-plate.html). However, this tutorial is specialized for the case when heat fluxes and temperatures live on different meshes. This is the case with CalculiX: heat fluxes are written on face centers, while temperatures are read on nodes. This requires updating the `precice-config.xml` file to take this into account. On the fluid side, a single mesh can still be used.
+The scenario is exactly the same as the one described in the [flow over heated plate tutorial](https://precice.org/tutorials-flow-over-heated-plate.html). However, this tutorial is specialized for the case when heat fluxes and temperatures live on different meshes. This is the case with CalculiX: heat fluxes are written on face centers, while temperatures are read on nodes. This requires updating the `precice-config.xml` file to take this into account. On the fluid side, a single mesh can still be used.
 
 ## Available solvers
 
@@ -24,7 +24,7 @@ Fluid participant:
 
 Solid participant:
 
-* CalculiX. For more information, have a look at the [CalculiX adapter documentation](http://precice.org/adapter-calculix-overview.html). Be sure to use at least version 2.19.1 of the adapter.
+* CalculiX. For more information, have a look at the [CalculiX adapter documentation](https://precice.org/adapter-calculix-overview.html). Be sure to use at least version 2.19.1 of the adapter.
 
 ## Running the Simulation
 

heat-exchanger-simplified/README.md

@@ -24,7 +24,7 @@ Fluid participants:
 
 Solid participant:
 
-* CalculiX. For more information, have a look at the [CalculiX adapter documentation](http://precice.org/adapter-calculix-overview.html). Be sure to use at least version 2.19.1 of the adapter.
+* CalculiX. For more information, have a look at the [CalculiX adapter documentation](https://precice.org/adapter-calculix-overview.html). Be sure to use at least version 2.19.1 of the adapter.
 
 ## Running the Simulation
 

perpendicular-flap/README.md

@@ -31,7 +31,7 @@ Solid participant:
 
 * FEniCS. The structural model is currently limited to linear elasticity. For more information, have a look at the [FEniCS adapter documentation](https://www.precice.org/adapter-fenics.html).
 
-* CalculiX. In order to allow a reasonable comparison to all solid codes, the geometrically non-linear solver has been disabled and only a linear model is used by default. For more information, have a look at the [CalculiX adapter documentation](https://www.precice.org/adapter-calculix-overview.html). Two cases are provided: one as a regular simulation, and one with modal dynamic simulations where a few eigenmodes are computed, and then used to simulate a reduced model. In that case, the `run.sh` script runs the frequency analysis, renames the output file to match with the actual input file, and then runs it. For more details, see the [adapter configuration documentation](http://precice.org/adapter-calculix-config.html). To run the modal dynamic version, add the `-modal` argument to the `run.sh` script.
+* CalculiX. In order to allow a reasonable comparison to all solid codes, the geometrically non-linear solver has been disabled and only a linear model is used by default. For more information, have a look at the [CalculiX adapter documentation](https://www.precice.org/adapter-calculix-overview.html). Two cases are provided: one as a regular simulation, and one with modal dynamic simulations where a few eigenmodes are computed, and then used to simulate a reduced model. In that case, the `run.sh` script runs the frequency analysis, renames the output file to match with the actual input file, and then runs it. For more details, see the [adapter configuration documentation](https://precice.org/adapter-calculix-config.html). To run the modal dynamic version, add the `-modal` argument to the `run.sh` script.
 
 * deal.II. This tutorial works only with `Model = linear` since the deal.II codes were developed with read data `Stress` instead of `Force` as applied here (example given in Turek-Hron-FSI) in the first place. The `./run.sh` script takes the compiled executable `elasticity` as input argument (`run.sh -e=/path/to/elasticity`) and is required in case the executable is not discoverable at runtime (e.g. has been added to the system `PATH`). For more information, have a look at the [deal.II adapter documentation](https://www.precice.org/adapter-dealii-overview.html).
 

tools/check-links-to-precice.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sed -i "s/http:\/\/precice.org/https:\/\/precice.org/g" "$@"