kimi-cli 使用中返回 invalid temperature: only 0.6 is allowed for this model' 是什么原因导致的？谢谢

[zjwustc]

昨天使用kimi-cli还正常，今天使用的时候会返回这个问题；请问这个是什么原因导致的？
LLM provider error: Error code: 400 - {'error': {'message': 'invalid temperature: only 0.6 is allowed for this model', 'type': 'invalid_request
_error'}}

[xiaoju111a]

试试config.toml那里调一下temperature

---

Try adjusting the temperature

[zjwustc]

好的；这个是针对所有的模型都增加了这限制吗？谢谢

---

Okay; is this limit added to all models? Thank you

[xiaoju111a]

好的；这个是针对所有的模型都增加了这限制吗？谢谢

Okay; is this limit added to all models? Thank you

只针对kimi2.5，具体参数可以参考下面的文档

[xiaoju111a]

昨天使用kimi-cli还正常，今天使用的时候会返回这个问题；请问这个是什么原因导致的？

LLM provider error: Error code: 400 - {'error': {'message': 'invalid temperature: only 0.6 is allowed for this model', 'type': 'invalid_request

_error'}}

https://platform.moonshot.cn/docs/guide/kimi-k2-5-quickstart

有更新check this

[zjwustc]

@xiaoju111a 你好，我看最新使用visual code 的kimi code插件使用文档中有配置 yoloMode，也可以在 config.boml 配置文件中配置 yoloMode 吗，如何配置？谢谢

---

@xiaoju111a Hello, I see that yoloMode is configured in the documentation for the latest kimi code plug-in using visual code. Can yoloMode be configured in the config.boml configuration file? How to configure it? Thank you

[xiaoju111a]

@xiaoju111a 你好，我看最新使用visual code 的kimi code插件使用文档中有配置 yoloMode，也可以在 config.boml 配置文件中配置 yoloMode 吗，如何配置？谢谢

@xiaoju111a Hello, I see that yoloMode is configured in the documentation for the latest kimi code plug-in using visual code. Can yoloMode be configured in the config.boml configuration file? How to configure it? Thank you

那个应该是在vscode的插件设置中，而不是config.toml里面配置

[zjwustc]

是的，我看说明，配置这个选项后不用每次会话再确认了；想了解下直接用 kimi-cli 时是不是也有类似的选项，谢谢

---

Yes, I read the instructions. After configuring this option, you don’t need to confirm it every session. I would like to know if there are similar options when using kimi-cli directly. Thank you

[xiaoju111a]

是的，我看说明，配置这个选项后不用每次会话再确认了；想了解下直接用 kimi-cli 时是不是也有类似的选项，谢谢

Yes, I read the instructions. After configuring this option, you don’t need to confirm it every session. I would like to know if there are similar options when using kimi-cli directly. Thank you

kimi-cli agent模式可以直接用/yolo命令开启

[zjwustc]

@xiaoju111a 好的，多谢多谢

---

@xiaoju111a Okay, thank you very much