Error message during homing

[printicus]

I have an NiteHawk 36 usb toolhead and i keep getting this error message:

"Error during homing probe: Communication timeout during homing"

I saw this message on different forums, but relatet to CANbus devices. Anny solution to resolve this?

My setup: Manta M8P with CB1.

[reboot-8]

I am having the same issue as well. Although mine only happens after the first print. If I restart Klipper in between prints, it goes away until my second print in a row.

I am running a Fly Mellow Gemini v3 with a zero click probe on my V0

[reboot-8]

I may have found a "fix" that seems to work.
I changed TRSYNC_TIMEOUT from 0.025 to 0.060 in /home/pi/klipper/klippy/mcu.py
https://forum.vorondesign.com/threads/error-communication-timeout-during-homing-probe-on-mellow-sb2040.1177/
Not sure how "hacky" this is, but so far seems to have fixed it for me. No issues so far in back to back prints.
YMMV.