diff --git a/xml/storage_mdadm-resize.xml b/xml/storage_mdadm-resize.xml
index 9d52818465..c29d772ee2 100644
--- a/xml/storage_mdadm-resize.xml
+++ b/xml/storage_mdadm-resize.xml
@@ -251,19 +251,21 @@
       continuing.
      </para>
     </step>
+    <step>
+    <para>
+    Attach the device you want use in the RAID, for example <filename>/dev/sda2</filename>, but do not mount it.
+    </para>
+    </step>
     <step>
      <para>
-      Remove one of the component partitions from the RAID array. For example,
-      to remove <filename>/dev/sda1</filename>, enter
-     </para>
-<screen>&prompt.sudo;mdadm /dev/md0 --fail /dev/sda1 --remove /dev/sda1</screen>
-     <para>
-      To succeed, both the fail and remove actions must be specified.
+      Replace one of the component partitions from the RAID array. For example,
+      to replace <filename>/dev/sda1</filename> with the bigger device <filename>/dev/sda2</filename>, enter
      </para>
+<screen>&prompt.sudo;mdadm /dev/md0 --replace /dev/sda1 --with /dev/sda2</screen>     
     </step>
     <step>
      <para>
-      Increase the size of the partition that you removed in the previous step
+      Increase the size of the partition (<filename>/dev/sda2</filename>)
       by doing one of the following:
      </para>
      <itemizedlist mark="bullet" spacing="normal">
@@ -285,18 +287,7 @@
        </para>
       </listitem>
      </itemizedlist>
-    </step>
-    <step>
-     <para>
-      Re-add the partition to the RAID array. For example, to add
-      <filename>/dev/sda1</filename>, enter
-     </para>
-<screen>&prompt.sudo;mdadm -a /dev/md0 /dev/sda1</screen>
-     <para>
-      Wait until the RAID is synchronized and consistent before continuing with
-      the next partition.
-     </para>
-    </step>
+    </step>    
     <step>
      <para>
       Repeat these steps for each of the remaining component devices in the