diff --git a/info.yaml b/info.yaml
index c80cb747..c5a824c8 100644
--- a/info.yaml
+++ b/info.yaml
@@ -1,46 +1,59 @@
 # Tiny Tapeout project information
 project:
-  title:        ""      # Project title
-  author:       ""      # Your name
-  discord:      ""      # Your discord username, for communication and automatically assigning you a Tapeout role (optional)
-  description:  ""      # One line description of what your project does
-  language:     "Verilog" # other examples include SystemVerilog, Amaranth, VHDL, etc
-  clock_hz:     0       # Clock frequency in Hz (or 0 if not applicable)
+  title:       "8-bit ALU"   # Project title
+  author:      "JorgeArias8644"    # Your name
+  discord:     ""      # Your discord username, for communication and automatically assigning you a Tapeout role (optional)
+  description: "An 8-bit Arithmetic Logic Unit performing addition, subtraction, AND, and OR operations."      # One line description of what your project does
+  language:    "Verilog" # other examples include SystemVerilog, Amaranth, VHDL, etc
+  clock_hz:    0         # Clock frequency in Hz (or 0 if not applicable)
 
   # How many tiles your design occupies? A single tile is about 167x108 uM.
-  tiles: "1x1"          # Valid values: 1x1, 1x2, 2x2, 3x2, 4x2, 6x2 or 8x2
+  tiles: "1x1"           # Valid values: 1x1, 1x2, 2x2, 3x2, 4x2, 6x2 or 8x2
 
   # Your top module name must start with "tt_um_". Make it unique by including your github username:
-  top_module:  "tt_um_example"
+  top_module:  "tt_um_alu_8bit_JorgeArias8644"
 
   # List your project's source files here.
   # Source files must be in ./src and you must list each source file separately, one per line.
   # Don't forget to also update `PROJECT_SOURCES` in test/Makefile.
   source_files:
-    - "project.v"
+    - "tt_um_alu_8bit_JorgeArias8644.v"
+    - "alu_1bit.v"
+    - "CLA.v"
+    - "mux2.v"
+    - "mux4.v"
+    - "xor_3a1n.v"
 
 # The pinout of your project. Leave unused pins blank. DO NOT delete or add any pins.
 # This section is for the datasheet/website. Use descriptive names (e.g., RX, TX, MOSI, SCL, SEG_A, etc.).
 pinout:
   # Inputs
-  ui[0]: ""
-  ui[1]: ""
-  ui[2]: ""
-  ui[3]: ""
-  ui[4]: ""
-  ui[5]: ""
-  ui[6]: ""
-  ui[7]: ""
+  ui[0]: "a[0]"
+  ui[1]: "a[1]"
+  ui[2]: "a[2]"
+  ui[3]: "a[3]"
+  ui[4]: "a[4]"
+  ui[5]: "a[5]"
+  ui[6]: "a[6]"
+  ui[7]: "a[7]"
+  ui[0]: "b[0]"
+  ui[1]: "b[1]"
+  ui[2]: "b[2]"
+  ui[3]: "b[3]"
+  ui[4]: "b[4]"
+  ui[5]: "b[5]"
+  ui[6]: "b[6]"
+  ui[7]: "b[7]"
 
   # Outputs
-  uo[0]: ""
-  uo[1]: ""
-  uo[2]: ""
-  uo[3]: ""
-  uo[4]: ""
-  uo[5]: ""
-  uo[6]: ""
-  uo[7]: ""
+  uo[0]: "led[0]"
+  uo[1]: "led[1]"
+  uo[2]: "led[2]"
+  uo[3]: "led[3]"
+  uo[4]: "led[4]"
+  uo[5]: "led[5]"
+  uo[6]: "led[6]"
+  uo[7]: "led[7]"
 
   # Bidirectional pins
   uio[0]: ""