【EESS】New submissions for Friday, 10 May 2024 (showing 27 of 27 entries )

[Yukeaaa]

Keyword: volume render

There is no result

Keyword: volumetric render

There is no result

Keyword: remote render

There is no result

Keyword: hybrid render

There is no result

Keyword: raycast

There is no result

Keyword: medical imaging

There is no result

Keyword: medical visualization

There is no result

Keyword: interactive volume

There is no result

Keyword: rendering

There is no result

Keyword: cinematic rendering

There is no result

Keyword: volume data

There is no result

Keyword: remote visualization

There is no result

Keyword: direct volume rendering

There is no result

Keyword: mobile device

There is no result

Keyword: transfer function

There is no result

Keyword: retrieval

There is no result

Keyword: video retrieval

There is no result

Keyword: mobile

There is no result

Keyword: smartphone

There is no result

Keyword: medical volume data

There is no result

Keyword: webgpu

There is no result

Keyword: webgl

There is no result

Keyword: pre-rendering

There is no result

Keyword: prerendering

There is no result

Keyword: motion prediction

There is no result

Keyword: incremental learning

There is no result

Keyword: svm incremental

There is no result

Keyword: nerf

There is no result

Keyword: multiorgan

There is no result

Keyword: multi-organ

There is no result

Keyword: multi organ

There is no result

Keyword: SAM

Title:

      Eco-driving Accounting for Interactive Cut-in Vehicles

• Authors: Chaozhe R. He, Nan Li
• Subjects: Subjects:
  Systems and Control (eess.SY)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  Automated vehicles can gather information about surrounding traffic and plan safe and energy-efficient driving behavior, which is known as eco-driving. Conventional eco-driving designs only consider preceding vehicles in the same lane as the ego vehicle. In heavy traffic, however, vehicles in adjacent lanes may cut into the ego vehicle's lane, influencing the ego vehicle's eco-driving behavior and compromising the energy-saving performance. Therefore, in this paper, we propose an eco-driving design that accounts for neighbor vehicles that have cut-in intentions. Specifically, we integrate a leader-follower game to predict the interaction between the ego and the cut-in vehicles and a model-predictive controller for planning energy-efficient behavior for the automated ego vehicle. We show that the leader-follower game model can reasonably represent the interactive motion between the ego vehicle and the cut-in vehicle. More importantly, we show that the proposed design can predict and react to neighbor vehicles' cut-in behaviors properly, leading to improved energy efficiency in cut-in scenarios compared to baseline designs that consider preceding vehicles only.

Title:

      3-way equal filtering power divider using compact folded-arms square open-Loop resonator

• Authors: Augustine O. Nwajana, Rose Paul
• Subjects: Subjects:
  Systems and Control (eess.SY); Applied Physics (physics.app-ph)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  Microstrip three-way (that is, 4.8 dB) integrated filtering power divider (FPD) is presented in this paper. The proposed FPD evenly distributes an input power signal into three equal output signals. The design incorporates balanced signal power division, and filtering technology for the removal of unwanted frequency elements and aimed at enhancing signal quality and efficiency in the radiofrequency (RF) front-end of communication systems. Microstrip folded-arms square open-loop resonator (FASOLR) is employed in the design implementation to achieve compact size. The proposed FPD features a 2.6 GHz centre frequency, with a 0.03 fractional bandwidth. The implementation is carried out on Rogers RT/Duroid 6010LM substrate with a dielectric constant of 10.7, a thickness of 1.27 mm and a loss tangent of 0.0023. The good agreement between the theoretical and practical results verifies the effectiveness of the FPD in delivering equal power outputs at the three output ports, and at the same time filtering out unwanted frequencies. The practical results of the prototype FPD indicate a good return loss of better than 15.5 dB and an insertion loss of better than 4.77+0.34 dB. The design prototype achieved compact size of 0.31 {\lambda}g x 0.18 {\lambda}g. {\lambda}g is the guided wavelength for the microstrip line impedance at the centre frequency of the 3-way equal filtering power divider.

Title:

      2-16 GHz Multifrequency X-Cut Lithium Niobate NEMS Resonators on a Single Chip

• Authors: Ryan Tetro, Luca Colombo, Matteo Rinaldi
• Subjects: Subjects:
  Systems and Control (eess.SY)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  This work presents the design, fabrication, and testing of X-Cut Lithium Niobate (LN) acoustic nanoelectromechanical (NEMS) Laterally Vibrating Resonators (LVRs) and Degenerate LVRs (d-LVRs) operating in the S0 (YZ30) and SH0 (YZ-10) modes between 2 to 16 GHz range, monolithically fabricated on a single chip. The NEMS topology is optimized to extend the aforementioned fundamental modes in the C-, X-, and Ku-bands while preserving performance and mass manufacturability. The devices present acoustic wavelengths ({\lambda}) varying between 1800 and 400 nm and are fabricated on a 100 nm ultra-thin LN film on high resistivity silicon with a 3-mask process. Experimental results highlighted quality factor at resonance (Qs) and mechanical quality factors (Qm) as high as 477 and 1750, respectively, and electromechanical coupling (kt2) as high as 32.7%. Large kt2 (>10%) are recorded over a broad range of frequencies (2 - 8 GHz), while Qm exceeding 100 are measured up to 15 GHz. Further enhancement to performance and range of operation on the same chip can be achieved by decreasing {\lambda}, refining the fabrication process, and optimizing device topology. These additional steps can help pave the way for manufacturing high-performance resonators on a single chip covering the entire 1 - 25 GHz spectrum.

Title:

      Joint Edge Optimization Deep Unfolding Network for Accelerated MRI Reconstruction

• Authors: Yue Cai, Yu Luo, Jie Ling, Shun Yao
• Subjects: Subjects:
  Image and Video Processing (eess.IV); Computer Vision and Pattern Recognition (cs.CV); Machine Learning (cs.LG)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  Magnetic Resonance Imaging (MRI) is a widely used imaging technique, however it has the limitation of long scanning time. Though previous model-based and learning-based MRI reconstruction methods have shown promising performance, most of them have not fully utilized the edge prior of MR images, and there is still much room for improvement. In this paper, we build a joint edge optimization model that not only incorporates individual regularizers specific to both the MR image and the edges, but also enforces a co-regularizer to effectively establish a stronger correlation between them. Specifically, the edge information is defined through a non-edge probability map to guide the image reconstruction during the optimization process. Meanwhile, the regularizers pertaining to images and edges are incorporated into a deep unfolding network to automatically learn their respective inherent a-priori information.Numerical experiments, consisting of multi-coil and single-coil MRI data with different sampling schemes at a variety of sampling factors, demonstrate that the proposed method outperforms other compared methods.

Title:

      Maximum Correntropy Polynomial Chaos Kalman Filter for Underwater Navigation

• Authors: Rohit Kumar Singh, Joydeb Saha, Shovan Bhaumik
• Subjects: Subjects:
  Signal Processing (eess.SP)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  This paper develops an underwater navigation solution that utilizes a strapdown inertial navigation system (SINS) and fuses a set of auxiliary sensors such as an acoustic positioning system, Doppler velocity log, depth meter, attitude meter, and magnetometer to accurately estimate an underwater vessel's position and orientation. The conventional integrated navigation system assumes Gaussian measurement noise, while in reality, the noises are non-Gaussian, particularly contaminated by heavy-tailed impulsive noises. To address this issue, and to fuse the system model with the acquired sensor measurements efficiently, we develop a square root polynomial chaos Kalman filter based on maximum correntropy criteria. The filter is initialized using acoustic beaconing to accurately locate the initial position of the vehicle. The computational complexity of the proposed filter is calculated in terms of flops count. The proposed method is compared with the existing maximum correntropy sigma point filters in terms of estimation accuracy and computational complexity. The simulation results demonstrate an improved accuracy compared to the conventional deterministic sample point filters.

Title:

      MSDiff: Multi-Scale Diffusion Model for Ultra-Sparse View CT Reconstruction

• Authors: Pinhuang Tan, Mengxiao Geng, Jingya Lu, Liu Shi, Bin Huang, Qiegen Liu
• Subjects: Subjects:
  Image and Video Processing (eess.IV); Computer Vision and Pattern Recognition (cs.CV)
• Arxiv link: https://arxiv.org/abs/
• Pdf link: https://arxiv.org/pdf/
• Abstract
  Computed Tomography (CT) technology reduces radiation haz-ards to the human body through sparse sampling, but fewer sampling angles pose challenges for image reconstruction. Score-based generative models are widely used in sparse-view CT re-construction, performance diminishes significantly with a sharp reduction in projection angles. Therefore, we propose an ultra-sparse view CT reconstruction method utilizing multi-scale dif-fusion models (MSDiff), designed to concentrate on the global distribution of information and facilitate the reconstruction of sparse views with local image characteristics. Specifically, the proposed model ingeniously integrates information from both comprehensive sampling and selectively sparse sampling tech-niques. Through precise adjustments in diffusion model, it is capable of extracting diverse noise distribution, furthering the understanding of the overall structure of images, and aiding the fully sampled model in recovering image information more effec-tively. By leveraging the inherent correlations within the projec-tion data, we have designed an equidistant mask, enabling the model to focus its attention more effectively. Experimental re-sults demonstrated that the multi-scale model approach signifi-cantly improved the quality of image reconstruction under ultra-sparse angles, with good generalization across various datasets.