MBusino in Home Assistant

[fpeters1974]

Hello,

I've set up an MBusion nano. I flashed the latest firmware (5S).

The web interface looks like this:

I have three MBUS three-phase meters (ELTAKO DSZ12DM) with primary addresses 0, 3, and 7 connected to the MBUS. However, the setup wizard isn't detecting any new MQTT topics.

The data seems to arrive correctly in the MQTT Explorer.

Am I doing something wrong regarding the "auto-detection"?

Florian

[fpeters1974]

Sorry, I need to correct myself. I was just too impatient! Eventually, HA recognized the data. It's resolved now. The entry can be deleted if necessary!

[Zeppelin500]

The third Telegram of every Meter generate the auto discovery message for HA. If you set 120sec, the Intervall is the time between the slaves. So you have to wait 120s x9 in your use case. If you want 120s every Meter, set 30 sec.

Is your telegram correct? There was an issue with Eltako. Update to the file in playground/jack.

It's part of the next release.

[Zeppelin500]

Just go at the GUI to [IP]/update and use this file
https://github.com/Zeppelin500/MBusino/tree/main/playground/Jack