diff --git a/README.md b/README.md
index 327bdc1..f84ba77 100644
--- a/README.md
+++ b/README.md
@@ -97,19 +97,6 @@ If the JLC preview shows a footprint like this, enter a rotation offset of -90 t
 
 <img src="https://github.com/bennymeg/JLC-Plugin-for-KiCad/blob/master/assets/rotation.png?raw=true" height=420>
 
-Use following table to quickly find out to which coordinate enter the correction based on JLC arrows clicks - depending on footprint rotation in KiCad PCB Editor status bar:
-|KiCad footprint deg | x | y|
-|----|----|----|
-|0 deg, Front | right arrow | up arrow |
-|0 deg, Back | left arrow | down arrow |
-|180 deg, Front | left arrow | down arrow |
-|180 deg, Back | right arrow | up arrow |
-|90 deg, Front or Back | up arrow | left arrow |
-|-90 deg, Front or Back | down arrow | right arrow |
-
-> [!TIP]  
-> Single arrow press in JLC is 0.0635mm (= 1/400in) shift.
-
 #### Primary Fields*:
 | 'FT Rotation Offset' |
 | --- |
@@ -129,6 +116,16 @@ The position of components in KiCad Footprints does not always match the orienta
 
 <img src="https://github.com/bennymeg/JLC-Plugin-for-KiCad/blob/master/assets/position.png?raw=true" height=420>
 
+Use following table to quickly find out to which coordinate enter the correction based on JLC arrows clicks - depending on footprint rotation in KiCad PCB Editor status bar:
+|KiCad footprint deg | x | y|
+|----|----|----|
+|0 deg, Front | right arrow | up arrow |
+|0 deg, Back | left arrow | down arrow |
+|180 deg, Front | left arrow | down arrow |
+|180 deg, Back | right arrow | up arrow |
+|90 deg, Front or Back | up arrow | left arrow |
+|-90 deg, Front or Back | down arrow | right arrow |
+
 > [!TIP]  
 > Single arrow press in JLC equals to 0.0635mm (= 1/400in) shift.