diff --git a/docs/BR.md b/docs/BR.md
index 5298d38a..1a8f3a83 100644
--- a/docs/BR.md
+++ b/docs/BR.md
@@ -2012,6 +2012,11 @@ For ECDSA key pairs, the CA SHALL:
 
 * Ensure that the key represents a valid point on the NIST P-256, NIST P-384 or NIST P-521 elliptic curve.
 
+For ML-DSA key pairs, the CA SHALL:
+
+* Ensure the Key uses one of the following parameter sets:
+  * ML-DSA-87 (OID: 2.16.840.1.101.3.4.3.19).
+
 No other algorithms or key sizes are permitted.
 
 ### 6.1.6 Public key parameters generation and quality checking
@@ -2020,6 +2025,8 @@ RSA: The CA SHALL confirm that the value of the public exponent is an odd number
 
 ECDSA: The CA SHOULD confirm the validity of all keys using either the ECC Full Public Key Validation Routine or the ECC Partial Public Key Validation Routine. [Source: Sections 5.6.2.3.2 and 5.6.2.3.3, respectively, of NIST SP 800-56A: Revision 2]
 
+For ML-DSA key pairs: no stipulation.
+
 ### 6.1.7 Key usage purposes (as per X.509 v3 key usage field)
 
 Private Keys corresponding to Root Certificates MUST NOT be used to sign Certificates except in the following cases:
@@ -2817,7 +2824,7 @@ Table: Permitted `policyQualifiers`
 
 ##### 7.1.2.7.11 Subscriber Certificate Key Usage
 
-The acceptable Key Usage values vary based on whether the Certificate's `subjectPublicKeyInfo` identifies an RSA public key or an ECC public key. CAs MUST ensure the Key Usage is appropriate for the Certificate Public Key.
+The acceptable Key Usage values vary based on whether the Certificate's `subjectPublicKeyInfo` identifies an RSA public key, an ECC public key, or an ML-DSA public key. CAs MUST ensure the Key Usage is appropriate for the Certificate Public Key.
 
 Table: Key Usage for RSA Public Keys
 
@@ -2851,6 +2858,20 @@ Table: Key Usage for ECC Public Keys
 
 **Note**: The `keyAgreement` bit is currently permitted, although setting it is NOT RECOMMENDED, as it is a Pending Prohibition (https://github.com/cabforum/servercert/issues/384).
 
+Table: Key Usage for ML-DSA Public Keys
+
+| __Key Usage__      | __Permitted__ | __Required__     |
+| -----              | --            | ---              |
+| `digitalSignature` | Y             | MUST             |
+| `nonRepudiation`   | N             | --               |
+| `keyEncipherment`  | N             | --               |
+| `dataEncipherment` | N             | --               |
+| `keyAgreement`     | N             | --               |
+| `keyCertSign`      | N             | --               |
+| `cRLSign`          | N             | --               |
+| `encipherOnly`     | N             | --               |
+| `decipherOnly`     | N             | --               |
+
 ##### 7.1.2.7.12 Subscriber Certificate Subject Alternative Name
 
 For Subscriber Certificates, the Subject Alternative Name MUST be present and MUST contain at least one `dNSName` or `iPAddress` `GeneralName`. See below for further requirements about the permitted fields and their validation requirements.
@@ -3344,6 +3365,19 @@ When encoded, the `AlgorithmIdentifier` for ECDSA keys MUST be byte-for-byte ide
 * For P-384 keys, `301006072a8648ce3d020106052b81040022`.
 * For P-521 keys, `301006072a8648ce3d020106052b81040023`.
 
+
+##### 7.1.3.1.3 ML-DSA
+
+The CA SHALL indicate an ML-DSA key using one of the following algorithm identifiers below:
+
+  * ML-DSA-87 (OID: 2.16.840.1.101.3.4.3.19).
+
+The parameters for ML-DSA keys SHALL be absent. The CA MUST NOT use HashML-DSA; only "pure" ML-DSA is permitted. Additionally, the CA SHALL NOT use this algorithm if the algorithm identifier of the Certificate's signature algorithm is not ML-DSA-87 (OID: 2.16.840.1.101.3.4.3.19).
+
+When encoded, the AlgorithmIdentifier for ML-DSA keys SHALL be byte-for-byte identical with the following hex-encoded bytes:
+
+* For ML-DSA-87, `300b0609608648016503040313`.
+
 #### 7.1.3.2 Signature AlgorithmIdentifier
 
 All objects signed by a CA Private Key MUST conform to these requirements on the use of the `AlgorithmIdentifier` or `AlgorithmIdentifier`-derived type in the context of signatures.
@@ -3442,6 +3476,13 @@ If the signing key is P-384, the signature MUST use ECDSA with SHA-384. When enc
 
 If the signing key is P-521, the signature MUST use ECDSA with SHA-512. When encoded, the `AlgorithmIdentifier` MUST be byte-for-byte identical with the following hex-encoded bytes: `300a06082a8648ce3d040304`.
 
+##### 7.1.3.2.4 ML-DSA
+
+The CA SHALL use the appropriate signature algorithm and encoding based upon the signing key used. Additionally, the CA SHALL NOT use this signature algorithm if the algorithm identifier of the public key being certified is not id-ml-dsa-87 (OID: 2.16.840.1.101.3.4.3.19).
+
+If the signing key is ML-DSA-87, the signature algorithm SHALL be id-ml-dsa-87 (OID: 2.16.840.1.101.3.4.3.19). When encoded, the `AlgorithmIdentifier` SHALL be byte-for-byte identical with the following hex-encoded bytes: `300b0609608648016503040313`.
+
+
 ### 7.1.4 Name Forms
 
 This section details encoding rules that apply to all Certificates issued by a CA. Further restrictions may be specified within [Section 7.1.2](#712-certificate-content-and-extensions), but these restrictions do not supersede these requirements.