Images for microswitch installation in probe do not match description

[swobbee-dev]

Hi,

the documentation states:

"After the glue has dried insert the microswitch so the plunger is in the middle of the probe."

However, in the pictures below the microswitch is installed exactly the other way around.

Unfortunately I noticed this too late, and since my switch had a bit of wiggle room side to side I had glued it in place...

[chestwood96]

That does indeed look the wrong way around on the picture but you are not supposed to glue the switch. Being able to replace/rotate the switch easily is a feature here. You may also want to take a look at unklicky slideswipe, it is pretty much universally better if you can build it right.

…

On Tue, Nov 12, 2024, 15:36 swobbee-dev ***@***.***> wrote: Hi, the documentation states: "After the glue has dried insert the microswitch *so the plunger is in the middle of the probe*." However, in the pictures below the microswitch is installed exactly the other way around. Unfortunately I noticed this too late, and since my switch had a bit of wiggle room side to side I had glued it in place... — Reply to this email directly, view it on GitHub <#10>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC3NLJQOXYMBMFHLPOGQUWD2AIG6LAVCNFSM6AAAAABRUGXQ5CVHI2DSMVQWIX3LMV43ASLTON2WKOZSGY2TEMZXGIYDQOI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[swobbee-dev]

Oh, interesting! Is this a drop-in replacement for the klicky probe?

Btw, I love the mechanism you built here. Its so satisfying to watch :)

[chestwood96]

Drop in, but uses the same 6mm magnets as everything else, no 5mm ones anywhere

…

On Tue, Nov 12, 2024, 18:51 swobbee-dev ***@***.***> wrote: Oh, interesting! Is this a drop-in replacement for the klicky probe? Will this work with the 5mm magnets on the toolhead? Btw, I love the mechanism you built here. Its so satisfying to watch :) — Reply to this email directly, view it on GitHub <#10 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC3NLJW3R66UXLHMUCII66T2AI53BAVCNFSM6AAAAABRUGXQ5CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINZRGIYDCNBQGY> . You are receiving this because you commented.Message ID: ***@***.***>