NextPCB Upload Errors

[Utter-Cha0s]

I wanted to look into getting boards made so that I could build out my own. But when I attempt to upload the gerber files via zip file, I get errors that are listed in the attached PDFs. If anyone has had luck uploading and ordering boards, please let me know.

ESP32DIV2-Shieldboard PCB Error Report.pdf
ESP32DIV2-Mainboard PCB Error Report.pdf

[QuietPond]

Same, I'm using the same mfr too. The mount holes should be easy to change though, I guess are on the board's edge cut layer, and depending what CAD you are using, you can change them to NPTH or plated for pogo pins. I think they can't mill them out.
I have zero experience using CAD though, or having a pcb made, I've been battling this for a few days. If I figure out how to change everything I'll upload a zip here.

[Utter-Cha0s]

Sounds good. I haven't taken too much time to dissect and understand where the issues are in CiferTech's uploaded design. I'm also not super familiar with CAD programs myself, so jumping into that process is my if all else fails option 🤣.

[JesseCHale]

@DarthSkii @sjfosella-wq here you go.. got my boards back a few days ago

ESP32DIV2-Main-GERBERS_Y5.zip

ESP32DIV2-Shield-GERBERS_Y6.zip

[Utter-Cha0s]

@JesseCHale Thank you for the updated fix. Any chance you can explain any of the corrections you needed to make?

@cifertech Wanted to tag you for review and potential update for your files. Love the work, hoping to get a few copies made to test and possibly modify myself!

[QuietPond]

Thank you so much!! Also, you did a great job with your fork for the V1.

[JesseCHale]

@QuietPond .. I just right now pushed a brand new update for the V1 boards!! , thank you for the kind words!!

[JesseCHale]

@DarthSkii there were a few other little issues in the files but by in large all I did was extract CPL from Altium Binary

• Parsed the .PcbDoc files using Python OLE document extraction
• Pulled component designators + X/Y coordinates from Components6/Data stream
• Converted Altium units to mm (factor: 0.0254)
• Generated JLCPCB-compatible CSV files
  As for the board design its self I dug into it a little and I think v1.5 might share some of the same issues as v1 boards did. im not stating anything is wrong, I need to build the boards I have and test them my self, however I see a few things that may need a work around! like what I applied to the v1 boards. I think Cifer has done a great job! but there might be a few things that need attention.. I DONT! see any show stoppers yet! hope that helps