diff --git a/.claude/commands/spectr/apply.md b/.claude/commands/spectr/apply.md
new file mode 100644
index 00000000..c5528c25
--- /dev/null
+++ b/.claude/commands/spectr/apply.md
@@ -0,0 +1,24 @@
+---
+name: Spectr: Apply
+description: Implement an approved Spectr change and keep tasks in sync.
+category: Spectr
+tags: [spectr, apply]
+---
+<!-- spectr:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `spectr/AGENTS.md` (located inside the `spectr/` directory—run `ls spectr` or `spectr update` if you don't see it) if you need additional Spectr conventions or clarifications.
+
+**Steps**
+Track these steps as TODOs and complete them one by one.
+1. Read `spectr/changes/<id>/proposal.md`, `design.md` (if present), and `tasks.md` to confirm scope and acceptance criteria.
+2. Work through tasks sequentially, keeping edits minimal and focused on the requested change.
+3. Confirm completion before updating statuses—make sure every item in `tasks.md` is finished.
+4. Update the checklist after all work is done so each task is marked `- [x]` and reflects reality.
+5. Reference `spectr list` or `spectr show <item>` when additional context is required.
+
+**Reference**
+- Use `spectr show <id> --json --deltas-only` if you need additional context from the proposal while implementing.
+
+<!-- spectr:END -->
diff --git a/.claude/commands/spectr/archive.md b/.claude/commands/spectr/archive.md
new file mode 100644
index 00000000..3e7a413c
--- /dev/null
+++ b/.claude/commands/spectr/archive.md
@@ -0,0 +1,28 @@
+---
+name: Spectr: Archive
+description: Archive a deployed Spectr change and update specs.
+category: Spectr
+tags: [spectr, archive]
+---
+<!-- spectr:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `spectr/AGENTS.md` (located inside the `spectr/` directory—run `ls spectr` or `spectr update` if you don't see it) if you need additional Spectr conventions or clarifications.
+
+**Steps**
+1. Determine the change ID to archive:
+   - If this prompt already includes a specific change ID (for example inside a `<ChangeId>` block populated by slash-command arguments), use that value after trimming whitespace.
+   - If the conversation references a change loosely (for example by title or summary), run `spectr list` to surface likely IDs, share the relevant candidates, and confirm which one the user intends.
+   - Otherwise, review the conversation, run `spectr list`, and ask the user which change to archive; wait for a confirmed change ID before proceeding.
+   - If you still cannot identify a single change ID, stop and tell the user you cannot archive anything yet.
+2. Validate the change ID by running `spectr list` (or `spectr show <id>`) and stop if the change is missing, already archived, or otherwise not ready to archive.
+3. Run `spectr archive <id> --yes` so the CLI moves the change and applies spec updates without prompts.
+4. Review the command output to confirm the target specs were updated and the change landed in `spectr/changes/archive/`.
+5. Validate with `spectr validate --strict` and inspect with `spectr show <id>` if anything looks off.
+
+**Reference**
+- Use `spectr list` to confirm change IDs before archiving.
+- Inspect refreshed specs with `spectr list --specs` and address any validation issues before handing off.
+
+<!-- spectr:END -->
diff --git a/.claude/commands/spectr/proposal.md b/.claude/commands/spectr/proposal.md
new file mode 100644
index 00000000..e672370a
--- /dev/null
+++ b/.claude/commands/spectr/proposal.md
@@ -0,0 +1,28 @@
+---
+name: Spectr: Proposal
+description: Scaffold a new Spectr change and validate strictly.
+category: Spectr
+tags: [spectr, change]
+---
+<!-- spectr:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `spectr/AGENTS.md` (located inside the `spectr/` directory—run `ls spectr` or `spectr update` if you don't see it) if you need additional Spectr conventions or clarifications.
+- Identify any vague or ambiguous details and ask the necessary follow-up questions before editing files.
+
+**Steps**
+1. Review `spectr/project.md`, run `spectr list` and `spectr list --specs`, and inspect related code or docs (e.g., via `rg`/`ls`) to ground the proposal in current behaviour; note any gaps that require clarification.
+2. Choose a unique verb-led `change-id` and scaffold `proposal.md`, `tasks.md`, and `design.md` (when needed) under `spectr/changes/<id>/`.
+3. Map the change into concrete capabilities or requirements, breaking multi-scope efforts into distinct spec deltas with clear relationships and sequencing.
+4. Capture architectural reasoning in `design.md` when the solution spans multiple systems, introduces new patterns, or demands trade-off discussion before committing to specs.
+5. Draft spec deltas in `spectr/changes/<id>/specs/<capability>/spec.md` (one folder per capability) using `## ADDED|MODIFIED|REMOVED Requirements` with at least one `#### Scenario:` per requirement and cross-reference related capabilities when relevant.
+6. Draft `tasks.md` as an ordered list of small, verifiable work items that deliver user-visible progress, include validation (tests, tooling), and highlight dependencies or parallelizable work.
+7. Validate with `spectr validate <id> --strict` and resolve every issue before sharing the proposal.
+
+**Reference**
+- Use `spectr show <id> --json --deltas-only` or `spectr show <spec> --type spec` to inspect details when validation fails.
+- Search existing requirements with `rg -n "Requirement:|Scenario:" spectr/specs` before writing new ones.
+- Explore the codebase with `rg <keyword>`, `ls`, or direct file reads so proposals align with current implementation realities.
+
+<!-- spectr:END -->
diff --git a/.claude/mcp/.mcp.json b/.claude/mcp/.mcp.json
new file mode 100644
index 00000000..625ea41e
--- /dev/null
+++ b/.claude/mcp/.mcp.json
@@ -0,0 +1,19 @@
+{
+  "mcpServers": {
+    "context7": {
+      "type": "stdio",
+      "command": "npx",
+      "args": [
+        "-y",
+        "@upstash/context7-mcp"
+      ],
+      "env": {}
+    },
+    "nixos": {
+      "command": "uvx",
+      "args": [
+        "mcp-nixos"
+      ]
+    }
+  }
+}
diff --git a/.claude/settings.json b/.claude/settings.json
new file mode 100644
index 00000000..cab2bccc
--- /dev/null
+++ b/.claude/settings.json
@@ -0,0 +1,131 @@
+{
+  "permissions": {
+    "allow": [
+      "Bash(mkdir:*)",
+      "Bash(uv:*)",
+      "Bash(find:*)",
+      "Bash(mv:*)",
+      "Bash(grep:*)",
+      "Bash(npm:*)",
+      "Bash(ls:*)",
+      "Bash(cp:*)",
+      "Write",
+      "Edit",
+      "Bash(chmod:*)",
+      "Bash(touch:*)"
+    ],
+    "deny": []
+  },
+  "hooks": {
+    "PostToolUse": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks PostToolUse"
+          }
+        ]
+      }
+    ],
+    "PreCompact": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks PreCompact"
+          }
+        ]
+      }
+    ],
+    "UserPromptSubmit": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks UserPromptSubmit"
+          }
+        ]
+      }
+    ],
+    "Stop": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks Stop"
+          }
+        ]
+      }
+    ],
+    "PreToolUse": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks PreToolUse"
+          }
+        ]
+      }
+    ],
+    "SessionEnd": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks SessionEnd"
+          }
+        ]
+      }
+    ],
+    "SubagentStop": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks SubagentStop"
+          }
+        ]
+      }
+    ],
+    "SubagentStart": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks SubagentStart"
+          }
+        ]
+      }
+    ],
+    "SessionStart": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks SessionStart"
+          }
+        ]
+      }
+    ],
+    "Notification": [
+      {
+        "matcher": "",
+        "hooks": [
+          {
+            "type": "command",
+            "command": "conclaude Hooks Notification"
+          }
+        ]
+      }
+    ]
+  }
+}
diff --git a/.conclaude.yaml b/.conclaude.yaml
new file mode 100644
index 00000000..8705c47b
--- /dev/null
+++ b/.conclaude.yaml
@@ -0,0 +1,159 @@
+# yaml-language-server: $schema=https://github.com/connerohnesorge/conclaude/releases/latest/download/conclaude-schema.json
+# Conclaude Configuration Template
+#
+# This is a minimal example configuration file.
+# For full documentation of all options, run: conclaude config --docs
+# Or see the generated documentation from `cargo doc --open`
+
+# Stop hook - runs when Claude is about to stop
+stop:
+  commands: []
+  # Example:
+  # - run: "npm test"
+  #   showStdout: true
+  #   showStderr: true
+  #   showCommand: true  # Show "Executing command X/Y: npm test" (default: true)
+  #   message: "Tests failed"
+  #   maxOutputLines: 100
+  #   timeout: 300
+
+  infinite: false
+  infiniteMessage: "continue working on the task"
+
+# Subagent stop hook - runs when subagents finish
+subagentStop:
+  commands: {}
+  # Example:
+  # coder:
+  #   - run: "npm run lint"
+  #     showStdout: true
+  #     showCommand: true  # Show "Executing command X/Y: npm run lint" (default: true)
+  #     message: "Linting failed"
+  # test*:
+  #   - run: "npm test"
+  #     showStderr: true
+  #     showCommand: false  # Hide the "Executing command..." line
+
+# Pre-tool-use hook - file protection and tool validation
+preToolUse:
+  # Prevent files at repository root
+  preventRootAdditions: true
+  # Custom message for root additions block (supports {file_path} and {tool} placeholders)
+  # Example: "Files must go in src/. Cannot create {file_path} using {tool}."
+  preventRootAdditionsMessage: null
+
+  # Protected files (glob patterns)
+  uneditableFiles:
+    - ".conclaude.yml"
+    - ".conclaude.yaml"
+  # Examples:
+  # - "*.lock"
+  # - pattern: ".env*"
+  #   message: "Environment files contain secrets"
+  #
+  # Agent-specific protection examples (blocks specific subagents):
+  # - pattern: "spectr/changes/**/tasks.jsonc"
+  #   message: "Task files managed by orchestrator"
+  #   agent: "coder"  # Only blocks coder subagent
+  #
+  # - pattern: "src/**/*.test.ts"
+  #   message: "Test files managed by tester agent"
+  #   agent: "code*"  # Blocks coder, coder-v2, etc.
+  #
+  # - pattern: "docs/**"
+  #   agent: "*"  # Blocks all agents (same as omitting agent field)
+
+  # Prevent editing git-ignored files
+  preventUpdateGitIgnored: false
+
+  # Tool usage rules
+  toolUsageValidation: []
+  # Example:
+  # - tool: "Write"
+  #   pattern: "**/*.js"
+  #   action: "allow"
+  # - tool: "Bash"
+  #   commandPattern: "git push --force*"
+  #   action: "block"
+  #   message: "Force push not allowed"
+  #
+  # Agent-scoped rules (only apply to specific agents):
+  # - tool: "Bash"
+  #   pattern: ""
+  #   commandPattern: "rm -rf *"
+  #   action: "block"
+  #   agent: "coder"
+  #   message: "Coder agent cannot run destructive rm commands"
+  # - tool: "Write"
+  #   pattern: "**/*.test.ts"
+  #   action: "block"
+  #   agent: "coder"
+  #   message: "Coder agent should not modify test files"
+  # - tool: "*"
+  #   pattern: "src/**"
+  #   action: "block"
+  #   agent: "test*"
+  #   message: "Test agents cannot modify source files"
+  #
+  # Agent pattern examples:
+  #   - agent: "coder"    # Exact match - only "coder" subagent
+  #   - agent: "test*"    # Glob pattern - matches "tester", "test-runner"
+  #   - agent: "*"        # Wildcard - matches all agents (default if omitted)
+
+  # Directories where additions are prevented
+  preventAdditions: []
+  # Example: ["dist", "build"]
+
+# System notifications
+notifications:
+  enabled: false
+  hooks: []  # ["*"] for all, or ["Stop", "PreToolUse"]
+  showErrors: false
+  showSuccess: false
+  showSystemEvents: true
+
+# Permission request hook - auto-approve/deny tools
+# Uncomment to enable:
+#
+# permissionRequest:
+#   default: deny  # "allow" or "deny"
+#   allow:
+#     - "Read"
+#     - "Glob"
+#     - "Grep"
+#     - "Edit"
+#     - "Write"
+#   deny:
+#     - "BashOutput"
+#     - "KillShell"
+
+# User prompt submit hook - context injection based on prompt patterns
+# Automatically prepends context when prompts match patterns
+# Uncomment to enable:
+#
+# userPromptSubmit:
+#   contextRules:
+#     # Pattern-based context injection
+#     - pattern: "sidebar"
+#       prompt: |
+#         Make sure to read @.claude/contexts/sidebar.md before proceeding.
+#
+#     # Multiple patterns with regex alternation
+#     - pattern: "auth|login|authentication"
+#       prompt: |
+#         Review the authentication patterns in @.claude/contexts/auth.md
+#
+#     # Case-insensitive matching (using regex flag)
+#     - pattern: "(?i)database|sql|query"
+#       prompt: |
+#         Follow the database conventions in @.claude/contexts/database.md
+#
+#     # Disable a rule temporarily
+#     - pattern: "test"
+#       prompt: "Run tests before proceeding"
+#       enabled: false
+#
+#     # Explicit case-insensitive flag
+#     - pattern: "api"
+#       prompt: "Check API documentation first"
+#       caseInsensitive: true
diff --git a/.config/ashell.yml b/.config/ashell.yml
deleted file mode 100644
index 40175fa2..00000000
--- a/.config/ashell.yml
+++ /dev/null
@@ -1,94 +0,0 @@
-# Ashell log level filter, possible values "DEBUG" | "INFO" | "WARNING" | "ERROR". Needs reload
-logLevel: "INFO" # optional, default "INFO"
-# List of outputs, example values: DP-1 | HDMI-1 | eDP-1.
-# the status bar will be displayed on all the outputs listed here
-# if the outputs is not available the bar will be displayed in the active output
-outputs: # optional, default empty list (the bar will be displayed on the active output)
-  - eDP-1
-  - DP-1
-# Bar position, possible values Top | Bottom.
-position: Top # optional, default Top
-# App lancher commanda, it will be used to open the launcher,
-# without a value the related button will not appear
-appLauncherCmd: "~/.config/rofi/launcher.sh" # optional, default None
-# Clipboard command, it will be used to open the clipboard menu,
-# without a value the related button will not appear
-clipboardCmd: "cliphist-rofi-img | wl-copy" # optional, default None
-# Update module configuration.
-# Without a value the related button will not appear.
-updates: # optional, default None
-  # The check command will be used to retrieve the update list.
-  # It should return something like `package_name version_from -> version_to\n`
-  checkCmd: "checkupdates; paru -Qua" # required
-  # The update command is used to init the OS update process
-  updateCmd: 'alacritty -e bash -c "paru; echo Done - Press enter to exit; read" &' # required
-# Maximum number of chars that can be present in the window title
-# after that the title will be truncated
-truncateTitleAfterLength: 150 # optional, default 150
-# The system module configuration
-system:
-  disabled: false # Enable or disable the system monitor module
-  cpuWarnThreshold: 6O # cpu indicator warning level (default 60)
-  cpuAlertThreshold: 8O # cpu indicator alert level (default 80)
-  memWarnThreshold: 7O # mem indicator warning level (default 70)
-  memAlertThreshold: 85 # mem indicator alert level (default 85)
-  tempWarnThreshold: 6O # temperature indicator warning level (default 60)
-  tempAlertThreshold: 8O # temperature indicator alert level (default 80)
-# Keyboard modules configuration
-keyboard:
-  layout:
-    disabled: false # Enable or disable the keyboard layout module
-  submap: # see: https://wiki.hyprland.org/Configuring/Binds/#submaps
-    disabled: false # Enable or disable the keyboard submap module
-# Clock module configuration
-clock:
-  # clock format see: https://docs.rs/chrono/latest/chrono/format/strftime/index.html
-  format: "%a %d %b %R" # optional, default: %a %d %b %R
-# Settings module configuration
-settings:
-  # command used for lock the system
-  # without a value the related button will not appear
-  lockCmd: "hyprlock &" # optional, default None
-  # command used to open the sinks audio settings
-  # without a value the related button will not appear
-  audioSinksMoreCmd: "pavucontrol -t 3" # optional default None
-  # command used to open the sources audio settings
-  # without a value the related button will not appear
-  audioSourcesMoreCmd: "pavucontrol -t 4" # optional, default None
-  # command used to open the network settings
-  # without a value the related button will not appear
-  wifiMoreCmd: "nm-connection-editor" # optional, default None
-  # command used to open the VPN settings
-  # without a value the related button will not appear
-  vpnMoreCmd: "nm-connection-editor" # optional, default None
-  # command used to open the Bluetooth settings
-  # without a value the related button will not appear
-  bluetoothMoreCmd: "blueman-manager" # optional, default None
-# Appearance config
-# Each color could be a simple hex color like #228800 or an
-# object that define a base hex color and two optional variant of that color (a strong one and a weak one)
-# and the text color that should be used with that base color
-# example:
-# backgroundColor:
-#   base: #448877
-#   strong: #448888 -- optional default autogenerated from base color
-#   weak: #448855 -- optional default autogenarated from base color
-#   text: #ffffff -- optional default base text color
-appearance:
-  backgroundColor: "#1e1e2e" # used as a base background color for header module button
-  primaryColor: "#fab387" # used as a accent color
-  secondaryColor: "#11111b" # used for darker background color
-  successColor: "#a6e3a1" # used for success message or happy state
-  dangerColor: "#f38ba8" # used for danger message or danger state (the weak version is used for the warning state
-  textColor: "#f38ba8" # base default text color
-  # this is a list of color that will be used in the workspace module (one color for each monitor)
-  workspaceColors:
-    - "#fab387"
-    - "#b4befe"
-  # this is a list of color that will be used in the workspace module
-  # for the special workspace (one color for each monitor)
-  # optional, default None
-  # without a value the workspaceColors list will be used
-  specialWorkspaceColors:
-    - "#a6e3a1"
-    - "#f38ba8"
diff --git a/.config/ashell/config.toml b/.config/ashell/config.toml
new file mode 100644
index 00000000..6dee39d6
--- /dev/null
+++ b/.config/ashell/config.toml
@@ -0,0 +1,261 @@
+# Ashell log level filter, possible values "debug" | "info" | "warn" | "error". Needs reload
+log_level = "error"
+# Possible status bar outputs, values could be: All, Active, or a list of outputs
+# All: the status bar will be displayed on all the available outputs, example: outputs = "All"
+# active: the status bar will be displayed on the active output, example: outputs = "Active"
+# list of outputs: the status bar will be displayed on the outputs listed here, example: outputs = { Targets = ["DP-1", "eDP-1"] }
+# if the outputs is not available the bar will be displayed in the active output
+outputs = "All"
+# Bar position, possible values Top | Bottom.
+position = "Top"
+# App launcher command, it will be used to open the launcher,
+# without a value the related button will not appear
+# optional, default None
+app_launcher_cmd = "~/.config/rofi/launcher.sh"
+# Clipboard command, it will be used to open the clipboard menu,
+# without a value the related button will not appear
+# optional, default None
+clipboard_cmd = "cliphist-rofi-img | wl-copy"
+
+# Declare which modules should be used and in which position in the status bar.
+# This is the list of all possible modules
+#  - AppLauncher
+#  - Updates
+#  - Clipboard
+#  - Workspaces
+#  - WindowTitle
+#  - SystemInfo
+#  - KeyboardLayout
+#  - KeyboardSubmap
+#  - Tray
+#  - Clock
+#  - Privacy
+#  - MediaPlayer
+#  - Settings
+# optional, the following is the default configuration
+[modules]
+# The modules that will be displayed on the left side of the status bar
+left = [ "WindowTitle" ]
+# The modules that will be displayed in the center of the status bar
+center = [ "Workspaces" ]
+# The modules that will be displayed on the right side of the status bar
+# The nested modules array will form a group sharing the same element in the status bar
+# You can also use custom modules to extend the normal set of options, see configuration below
+right = [ "SystemInfo", [ "Clock", "Privacy", "Settings" ], "CustomNotifications" ]
+
+# Update module configuration.
+# Without a value the related button will not appear.
+# optional, default None
+[updates]
+# The check command will be used to retrieve the update list.
+# It should return something like `package_name version_from -> version_to\n`
+check_cmd = "checkupdates; paru -Qua"
+# The update command is used to init the OS update process
+update_cmd = 'alacritty -e bash -c "paru; echo Done - Press enter to exit; read" &'
+
+# Workspaces module configuration, optional
+[workspaces]
+# The visibility mode of the workspaces, possible values are:
+# All: all the workspaces will be displayed
+# MonitorSpecific: only the workspaces of the related monitor will be displayed
+# optional, default All
+visibility_mode = "All"
+
+# Enable filling with empty workspaces
+# For example:
+# With this flag set to true if there are only 2 workspaces,
+# the workspace 1 and the workspace 4, the module will show also
+# two more workspaces, the workspace 2 and the workspace 3
+# optional, default false
+enable_workspace_filling = false
+
+# If you want to see more workspaces prefilled, set the number here:
+# max_workspaces = 6
+# In addition to the 4 workspaces described above it will also show workspaces 5 and 6
+# Only works with `enable_workspace_filling = true`
+
+# WindowTitle module configuration, optional
+[window_title]
+# The information to get from your active window.
+# Possible modes are:
+# - Title
+# - Class
+# optional, default Title
+mode = "Title"
+
+# Maximum number of chars that can be present in the window title
+# after that the title will be truncated
+# optional, default 150
+truncate_title_after_length = 150
+
+
+# keyboardLayout module configuration
+# optional
+# Maps layout names to arbitrary labels, which can be any text, including unicode symbols as shown below
+# If using Hyprland the names can be found in `hyprctl devices | grep "active keymap"`
+[keyboard_layout.labels]
+"English (US)" = "🇺🇸"
+"Russian" = "🇷🇺"
+
+# The system module configuration
+# optional
+[system]
+# System information shown in the status bar
+# The possible values are:
+#  - Cpu
+#  - Memory
+#  - MemorySwap
+#  - Temperature
+#  - { disk = "path" }
+#  - IpAddress
+#  - DownloadSpeed
+#  - UploadSpeed
+# optional, the following is the default configuration
+# If for example you want to dispay the usage of the root and home partition
+# you can use the following configuration
+# systemInfo = [ { disk = "/" }, { disk = "/home" } ]
+indicators = [ "Cpu", "Memory", "Temperature" ]
+
+# CPU indicator thresholds
+# optional
+[system.cpu]
+# cpu indicator warning level (default 60)
+warn_threshold = 60
+# cpu indicator alert level (default 80)
+alert_threshold = 80
+
+# Memory indicator thresholds
+# optional
+[system.memory]
+# mem indicator warning level (default 70)
+warn_threshold = 70
+# mem indicator alert level (default 85)
+alert_threshold = 85
+
+# Memory swap indicator thresholds
+# optional
+[system.temperature]
+# temperature indicator warning level (default 60)
+warn_threshold = 60
+# temperature indicator alert level (default 80)
+alert_threshold = 80
+
+# Disk indicator thresholds
+# optional
+[system.disk]
+# disk indicator warning level (default 80)
+warn_threshold = 80
+# disk indicator alert level (default 90)
+alert_threshold = 90
+
+# Clock module configuration
+[clock]
+# clock format see: https://docs.rs/chrono/latest/chrono/format/strftime/index.html
+format = "%a %d %b %R"
+
+# Media player module configuration
+[media_player]
+# optional, default 100
+max_title_length = 100
+
+# Custom modules configuration (you can have multiple)
+[[CustomModule]]
+# The name will link the module in your left/center/right definition
+name = "CustomNotifications"
+# The default icon for this custom module
+icon = ""
+# The command that will be executed on click
+command = "swaync-client -t -sw"
+# You can optionally configure your custom module to update the UI using another command
+# The output right now follows the waybar json-style output, using the `alt` and `text` field
+# E.g. `{"text": "3", "alt": "notification"}`
+listen_cmd = "swaync-client -swb"
+# You can define behavior for the `text` and `alt` fields
+# Any number of regex can be used to change the icon based on the alt field
+icons.'dnd.*' = ""
+# Another regex can optionally show a red "alert" dot on the icon
+alert = ".*notification"
+
+# Settings module configuration
+[settings]
+# command used for lock the system
+# without a value the related button will not appear
+# optional, default None
+lock_cmd = "hyprlock &"
+# commands used to respectively shutdown, suspend, reboot and logout
+# all optional, without values the defaults shown here will be used
+shutdown_cmd = "shutdown now"
+suspend_cmd = "systemctl suspend"
+reboot_cmd = "systemctl reboot"
+logout_cmd = "loginctl kill-user $(whoami)"
+# command used to open the sinks audio settings
+# without a value the related button will not appear
+# optional default None
+audio_sinks_more_cmd = "pavucontrol -t 3"
+# command used to open the sources audio settings
+# without a value the related button will not appear
+# optional, default None
+audio_sources_more_cmd = "pavucontrol -t 4"
+# command used to open the network settings
+# without a value the related button will not appear
+# optional, default None
+wifi_more_cmd = "nm-connection-editor"
+# command used to open the VPN settings
+# without a value the related button will not appear
+# optional, default None
+vpn_more_cmd = "nm-connection-editor"
+# command used to open the Bluetooth settings
+# without a value the related button will not appear
+# optional, default None
+bluetooth_more_cmd = "blueman-manager"
+# option to remove the airtplane button
+# optional, default false
+remove_airplane_btn = true
+
+# Appearance config
+# Each color could be a simple hex color like #228800 or an
+# object that define a base hex color and two optional variant of that color (a strong one and a weak one)
+# and the text color that should be used with that base color
+# example:
+# [appearance.background_color]
+# base = "#448877"
+# strong = "#448888" # optional default autogenerated from base color
+# weak = "#448855" # optional default autogenarated from base color
+# text = "#ffffff" # optional default base text color
+[appearance]
+# optional, default iced.rs font
+font_name = "Comic Sans MS"
+# The style of the main bar, possible values are: Islands | Solid | Gradient
+# optional, default Islands
+style = "Islands"
+# The opacity of the main bar, possible values are: 0.0 to 1.0
+# optional, default 1.0
+opacity = 0.7
+# used as a base background color for header module button
+background_color = "#1e1e2e"
+# used as a accent color
+primary_color = "#fab387"
+# used for darker background color
+secondary_color = "#11111b"
+# used for success message or happy state
+success_color = "#a6e3a1"
+# used for danger message or danger state (the weak version is used for the warning state
+danger_color = "#f38ba8"
+# base default text color
+text_color = "#f38ba8"
+# this is a list of color that will be used in the workspace module (one color for each monitor)
+workspace_colors = [ "#fab387", "#b4befe" ]
+# this is a list of color that will be used in the workspace module
+# for the special workspace (one color for each monitor)
+# optional, default None
+# without a value the workspaceColors list will be used
+special_workspace_colors = [ "#a6e3a1", "#f38ba8" ]
+
+# menu options
+[appearance.menu]
+# The opacity of the menu, possible values are: 0.0 to 1.0
+# optional, default 1.0
+opacity = 0.7
+# The backdrop of the menu, possible values are: 0.0 to 1.0
+# optional, default 0.0
+backdrop = 0.3
diff --git a/.config/ghostty/.gitignore b/.config/ghostty/.gitignore
new file mode 100644
index 00000000..04204c7c
--- /dev/null
+++ b/.config/ghostty/.gitignore
@@ -0,0 +1 @@
+config
diff --git a/.config/ghostty/config b/.config/ghostty/config
deleted file mode 100644
index cd624815..00000000
--- a/.config/ghostty/config
+++ /dev/null
@@ -1,9 +0,0 @@
-font-family = "CodeNewRoman Nerd Font"
-
-macos-titlebar-style = hidden
-
-window-decoration = false
-
-background = #000000
-
-bold-is-bright = true
diff --git a/.config/ghostty/ghostty.linux b/.config/ghostty/ghostty.linux
new file mode 100644
index 00000000..9f9c70f7
--- /dev/null
+++ b/.config/ghostty/ghostty.linux
@@ -0,0 +1,27 @@
+# Ghostty Configuration for Linux
+# This configuration is optimized for Linux desktop environments,
+# particularly tiling window managers like Hyprland.
+
+# Shell Configuration
+shell-integration = zsh
+command=zsh
+
+# Font Settings
+# Using CodeNewRoman Nerd Font for programming with ligature support
+font-family = "CodeNewRoman Nerd Font"
+
+# Window Configuration
+# Decorations disabled for better integration with tiling WMs
+window-decoration = false
+
+# Theme Settings
+# Pure black background for OLED displays and better contrast
+background = #000000
+
+# Terminal Behavior
+# bold-is-bright = true
+# Allow shift+enter to insert newlines in terminal
+keybind = shift+enter=text:\n
+# Inherit working directory from parent process
+working-directory=inherit
+keybind = ctrl+shift+j=write_scrollback_file:open
diff --git a/.config/ghostty/ghostty.macos b/.config/ghostty/ghostty.macos
new file mode 100644
index 00000000..7f110eee
--- /dev/null
+++ b/.config/ghostty/ghostty.macos
@@ -0,0 +1,27 @@
+# Ghostty Configuration for macOS
+# This configuration is optimized for macOS desktop environments,
+# using native window decorations and system integration.
+
+# Shell Configuration
+shell-integration = zsh
+command=zsh
+
+# Font Settings
+# Using CodeNewRoman Nerd Font for programming with ligature support
+font-family = "CodeNewRoman Nerd Font"
+
+# Window Configuration
+# Window decorations enabled for native macOS experience
+# (commented out means using default, which is true on macOS)
+#window-decoration = false
+
+# Theme Settings
+# Pure black background for OLED displays and better contrast
+background = #000000
+
+# Terminal Behavior
+# bold-is-bright = true
+# Allow shift+enter to insert newlines in terminal
+keybind = shift+enter=text:\n
+# Inherit working directory from parent process
+working-directory=inherit
diff --git a/.config/home-manager/flake.nix b/.config/home-manager/flake.nix
index 1fe4b111..694415ac 100644
--- a/.config/home-manager/flake.nix
+++ b/.config/home-manager/flake.nix
@@ -1,5 +1,5 @@
 {
-  description = "Home Manager configuration of connerohnesorge";
+  description = "Home Manager configuration";
 
   inputs = {
     nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-unstable";
@@ -17,17 +17,38 @@
     ...
   }: {
     homeConfigurations = {
-      # macOS configuration
+      # Personal macOS configuration
       "connerohnesorge@Conners-MacBook-Air.local" = home-manager.lib.homeManagerConfiguration {
-        pkgs = nixpkgs.legacyPackages.aarch64-darwin; # Assuming M1/M2 Mac, use x86_64-darwin for Intel
+        pkgs = nixpkgs.legacyPackages.aarch64-darwin;
+        extraSpecialArgs = {username = "connerohnesorge";};
         modules = [
           ./home-darwin.nix
         ];
       };
 
-      # Linux configuration
+      # Work macOS configuration
+      "cohnesor@CB14957.local" = home-manager.lib.homeManagerConfiguration {
+        pkgs = nixpkgs.legacyPackages.aarch64-darwin;
+        extraSpecialArgs = {username = "cohnesor";};
+        modules = [
+          ./home-darwin.nix
+        ];
+      };
+
+      # Personal Linux configuration
       "connerohnesorge" = home-manager.lib.homeManagerConfiguration {
         pkgs = nixpkgs.legacyPackages.x86_64-linux;
+        extraSpecialArgs = {username = "connerohnesorge";};
+        modules = [
+          stylix.homeManagerModules.stylix
+          ./home.nix
+        ];
+      };
+
+      # Work Linux configuration (if needed)
+      "cohnesor" = home-manager.lib.homeManagerConfiguration {
+        pkgs = nixpkgs.legacyPackages.x86_64-linux;
+        extraSpecialArgs = {username = "cohnesor";};
         modules = [
           stylix.homeManagerModules.stylix
           ./home.nix
diff --git a/.config/home-manager/home-darwin.nix b/.config/home-manager/home-darwin.nix
index e46313a0..5ef8a5a8 100644
--- a/.config/home-manager/home-darwin.nix
+++ b/.config/home-manager/home-darwin.nix
@@ -2,11 +2,12 @@
   config,
   pkgs,
   lib,
+  username ? "connerohnesorge",
   ...
 }: {
   home = {
-    username = "connerohnesorge";
-    homeDirectory = "/home/connerohnesorge";
+    inherit username;
+    homeDirectory = "/Users/${username}";
 
     # You should not change this value, even if you update Home Manager. If you do
     # want to update the value, then make sure to first check the Home Manager
diff --git a/.config/home-manager/home.nix b/.config/home-manager/home.nix
index 13bcf12c..69ead439 100644
--- a/.config/home-manager/home.nix
+++ b/.config/home-manager/home.nix
@@ -3,11 +3,12 @@
   pkgs,
   lib,
   stylix,
+  username ? "connerohnesorge",
   ...
 }: {
   home = {
-    username = "connerohnesorge";
-    homeDirectory = "/home/connerohnesorge";
+    inherit username;
+    homeDirectory = "/home/${username}";
 
     # You should not change this value, even if you update Home Manager. If you do
     # want to update the value, then make sure to first check the Home Manager
diff --git a/.config/hypr/hyprland.conf b/.config/hypr/hyprland.conf
index b7c2c42d..13114b49 100644
--- a/.config/hypr/hyprland.conf
+++ b/.config/hypr/hyprland.conf
@@ -2,34 +2,45 @@
 debug:disable_logs = false
 monitor=DP-1,1920x1080,0x0,1
 monitor=eDP-1,2304x1440,1920x400,2
-
 $terminal = ghostty
-$fileManager = nautilus
+$fileManager = dolphin
+
 $menu = rofi -show drun
+$calc_menu = rofi -show calc -modi calc -no-show-match -no-sort
 $editor = nvim
 $mainMod = SUPER
 $browser = zen
+$color_picker = hyprpicker -a
+
+ecosystem:no_update_news = true
 
 cursor {
-     use_cpu_buffer = true
+        use_cpu_buffer = true
 }
 
-env = XCURSOR_SIZE,24
-env = QT_QPA_PLATFORMTHEME,qt6ct
+env = QT_QPA_PLATFORMTHEME,kde
 env = QT_QPA_PLATFORM,wayland;xcb
 env = EDITOR,nvim
-env = LIBVA_DRIVER_NAME,nvidia
-env = XDG_SESSION_TYPE,wayland
-env = XDG_SESSION_DESKTOP,Hyprland
-env = XDG_CURRENT_DESKTOP,Hyprland
-env = GDK_BACKEND,wayland,x11,*
 env = TERM,$terminal
 env = TERMINAL,$terminal
+env = EXPLORER,$fileManager
+env = SHELL,zsh
+env = DEFAULT_BROWSER,zen
 env = GBM_BACKEND,nvidia-drm
 env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-env = SDL_VIDEODRIVER,wayland
+# env = SDL_VIDEODRIVER,wayland
+env = GDK_BACKEND,wayland,x11,*
+env = GTK_THEME,Adwaita:dark
 env = CLUTTER_BACKEND,wayland
-env = SHELL,zsh
+env = XCURSOR_SIZE,24
+
+# Set by UWSM automatically:
+# env = XDG_SESSION_TYPE,wayland
+# env = XDG_SESSION_DESKTOP,Hyprland
+# env = XDG_CURRENT_DESKTOP,Hyprland
+
+# # env = HYPRLAND_TRACE,1 
+# # env = AQ_TRACE,1
 
 input { # https://wiki.hyprland.org/Configuring/Variables/
     kb_layout = us
@@ -44,7 +55,8 @@ general { # https://wiki.hyprland.org/Configuring/Variables/#general
     gaps_in = 4
     gaps_out = 5
     border_size = 1
-    col.active_border = rgba(33ff0fee) rgba(00ff99ee) 45deg
+    # col.active_border = rgba(33ff0fee) rgba(00ff99ee) 45deg
+    col.active_border = rgba(ffffffff)
     col.inactive_border = rgba(595959aa)
     layout = dwindle
     allow_tearing = false
@@ -72,35 +84,41 @@ master { # https://wiki.hyprland.org/Configuring/Master-Layout/
 }
 
 gestures { # https://wiki.hyprland.org/Configuring/Variables/#gestures
-    workspace_swipe = yes
+    # workspace_swipe = yes
 }
 
 misc { # https://wiki.hyprland.org/Configuring/Variables/#misc
     force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
     vfr = true # lower the amount of sent frames when nothing is happening on-screen
+    focus_on_activate = true
 }
 
 device { # https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs
 }
 
 # https://wiki.hyprland.org/Configuring/Window-Rules/ 
-windowrule = allowsinput on, title:(All Files)
-windowrulev2 = suppressevent maximize, class:.* 
-windowrulev2 = tile, class:^(Spotify)$
-windowrulev2 = workspace 9, class:^(Spotify)$
-
-
+# windowrule = float, class:Xdg-desktop-portal-gtk, focus:0
+# windowrule = match:class Xdg-desktop-portal-gtk, center 1, stayfocused on, tile 1
+# # windowrulev2 = suppressevent maximize, class:.* 
+# windowrule = tile, class:^(Spotify)$
+# windowrule = workspace 9, class:^(Spotify)$
+# windowrule = workspace 10, class:^(Chromium-browser), focus:0$
+# windowrule = stayfocused, class:(gcr-prompter-)(.*), focus:1
 
 # Key bindings https://wiki.hyprland.org/Configuring/Binds/
-bind = $mainMod, B,exec,  $browser
-bind = $mainMod, Q, exec, $terminal
+bind = $mainMod, B,exec, $browser
+bind = $mainMod, Q,exec, sh ~/dotfiles/.config/hypr/scripts/term.sh
 bind = $mainMod SHIFT, Q, killactive, 
-bind = $mainMod, M, exit, 
+# bind = $mainMod, M, exit, 
 bind = $mainMod, E, exec, $fileManager
 bind = $mainMod, V, togglefloating, 
 bind = $mainMod, D, exec, $menu
+bind = $mainMod, C, exec, $calc_menu
+bind = $mainMod, F, fullscreen,0
 bind = $mainMod, P, pseudo, # dwindle
 bind = $mainMod, T, togglesplit, # dwindle
+bind = $mainMod SHIFT, C, exec, $color_picker
+bind = , mouse:274, exec, ;
 
 # Move focus with mainMod + arrow keys
 bind = $mainMod, H, movefocus, l
@@ -141,8 +159,10 @@ bind = $mainMod, S, togglespecialworkspace, magic
 bind = $mainMod SHIFT, S, movetoworkspace, special:magic
 
 bind = , Print, exec, sh ~/.config/hypr/scripts/screenshot.sh
-bind = SHIFT, Print, exec, grim - | wl-copy && wl-paste > ~/Pictures/Screenshots/Screenshot-$(date +%F_%T).png | dunstify "Screenshot of whole screen taken at $(date +%F_%T)" -t 1000 
+bind = SHIFT, Print, exec, sh ~/.config/hypr/scripts/i-screenshot.sh
 bind = CTRL SHIFT, M, exec, sh ~/.config/hypr/scripts/mathpix.sh
+bind = ALT SHIFT, M, exec, sh ~/.config/hypr/scripts/mai.sh
+bind = CTRL SHIFT, S, exec, sh ~/.config/hypr/scripts/screenshot.sh
 
 # Scroll through existing workspaces with mainMod + scroll
 bind = $mainMod, mouse_down, workspace, e+1
@@ -180,14 +200,5 @@ bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
 bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
 bindl = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
 
-
-exec-once=/usr/libexec/polkit-gnome-authentication-agent-1
 exec-once=hyprpaper
 exec-once=sh ~/.config/hypr/setup.sh
-
-
-exec-once = dconf write /org/gnome/desktop/interface/gtk-theme "'Adwaita'"
-exec-once = dconf write /org/gnome/desktop/interface/icon-theme "'Flat-Remix-Red-Dark'"
-exec-once = dconf write /org/gnome/desktop/interface/document-font-name "'Noto Sans Medium 11'"
-exec-once = dconf write /org/gnome/desktop/interface/font-name "'Noto Sans Medium 11'"
-exec-once = dconf write /org/gnome/desktop/interface/monospace-font-name "'Noto Sans Mono Medium 11'"
diff --git a/.config/hypr/hyprlandd.conf b/.config/hypr/hyprlandd.conf
new file mode 120000
index 00000000..17c58b11
--- /dev/null
+++ b/.config/hypr/hyprlandd.conf
@@ -0,0 +1 @@
+hyprland.conf
\ No newline at end of file
diff --git a/.config/hypr/hyprpaper.conf b/.config/hypr/hyprpaper.conf
index 505a0f95..36c7fe5a 100644
--- a/.config/hypr/hyprpaper.conf
+++ b/.config/hypr/hyprpaper.conf
@@ -1,3 +1,3 @@
 
-preload = /home/connerohnesorge/Pictures/klaus-desktop.jpeg
-wallpaper = ,/home/connerohnesorge/Pictures/klaus-desktop.jpeg
+preload = $HOME/dotfiles/assets/klaus-desktop.jpeg
+wallpaper = ,$HOME/dotfiles/assets/klaus-desktop.jpeg
diff --git a/.config/hypr/scripts/.gitignore b/.config/hypr/scripts/.gitignore
new file mode 100644
index 00000000..2503d787
--- /dev/null
+++ b/.config/hypr/scripts/.gitignore
@@ -0,0 +1,3 @@
+mai
+pixcli
+tmp
diff --git a/.config/hypr/scripts/i-screenshot.sh b/.config/hypr/scripts/i-screenshot.sh
new file mode 100644
index 00000000..c594e1ea
--- /dev/null
+++ b/.config/hypr/scripts/i-screenshot.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# Define the path to save the screenshot
+ppath=~/Pictures/Screenshots/Screenshot-"$(date +%F_%T)".png
+
+# Take a screenshot of a selected region and copy it to clipboard, then save it to the defined path
+grim -g "$(slurp)" - | tee >(wl-copy) > "$ppath" && dunstify "Screenshot of the region taken at $(date +%F_%T)" -t 1000
+
+# Create a notification message
+NOTE="Screenshot @ $ppath"
+
+open "$ppath"
+# Notify using hyprctl and dunstify
+# hyprctl notify 1 10000 0 "$NOTE"
+dunstify "$NOTE" -t 10000 -A "copy, Copy to clipboard" 
+cat $ppath | pbcopy
diff --git a/.config/hypr/scripts/mai.sh b/.config/hypr/scripts/mai.sh
new file mode 100644
index 00000000..bb4d15aa
--- /dev/null
+++ b/.config/hypr/scripts/mai.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+set -e
+
+# Function to run command and notify
+run_command() {
+    local output
+    if ! output=$(eval "$1" 2>&1); then
+        dunstify "Error" "$2\n\nCommand output:\n$output" -u critical -t 15000
+        exit 1
+    fi
+    echo "$output"
+}
+
+# Define the path to save the screenshot
+ppath=~/Pictures/Screenshots/Screenshot-"$(date +%F_%T)".png
+mdpath=~/Pictures/Screenshots/Screenshot-"$(date +%F_%T)".mmd
+
+# Take a screenshot of a selected region and copy it to clipboard, then save it to the defined path
+run_command "grim -g \"$(slurp)\" - > \"$ppath\"" "Failed to capture screenshot"
+
+# Create a notification message
+NOTE="Screenshot @ $ppath"
+
+# Disable color output
+export FORCE_COLOR=0
+
+# Run mpx with all provided arguments
+run_command '$HOME/.config/hypr/scripts/mai '$ppath
diff --git a/.config/hypr/scripts/pixcli b/.config/hypr/scripts/pixcli
deleted file mode 100755
index 2a00cd9f..00000000
Binary files a/.config/hypr/scripts/pixcli and /dev/null differ
diff --git a/.config/hypr/scripts/screenshot.sh b/.config/hypr/scripts/screenshot.sh
index 626dd93a..acc293c8 100755
--- a/.config/hypr/scripts/screenshot.sh
+++ b/.config/hypr/scripts/screenshot.sh
@@ -1,16 +1,25 @@
 #!/bin/bash
 
 # Define the path to save the screenshot
-ppath=~/Pictures/Screenshots/Screenshot-"$(date +%F_%T)".png
+ppath=~/Pictures/Screenshot-"$(date +%F_%T)".png
 
 # Take a screenshot of a selected region and copy it to clipboard, then save it to the defined path
-grim -g "$(slurp)" - | wl-copy && wl-paste > "$ppath" | dunstify "Screenshot of the region taken at $(date +%F_%T)" -t 1000
-
-# Create a notification message
-NOTE="Screenshot @ $ppath"
-
-# Notify using hyprctl and dunstify
-# hyprctl notify 1 10000 0 "$NOTE"
-dunstify "$NOTE" -t 10000 -A "copy, Copy to clipboard" --action="copy:wl-copy $ppath"
-
-# grim -g "$(slurp)" - | swappy -f -
+if grim -g "$(slurp)" - | wl-copy && wl-paste > "$ppath"; then
+    # Send notification with action buttons
+    action=$(dunstify "Screenshot taken" "Saved at $(date +%F_%T)" \
+        -A "open,default,Open with default app" \
+        -A "folder,Open in file manager" \
+        -t 10000 \
+        -i "$ppath")
+    # Handle the action based on user response
+    case "$action" in
+        "open")
+            xdg-open "$ppath"
+            ;;
+        "folder")
+            dolphin --select "$ppath"
+            ;;
+    esac
+else
+    dunstify "Screenshot failed" "Could not capture screenshot" -u critical
+fi
diff --git a/.config/hypr/scripts/song-detaul.sh b/.config/hypr/scripts/song-detaul.sh
deleted file mode 100755
index 514e51e4..00000000
--- a/.config/hypr/scripts/song-detaul.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-song_info=$(playerctl metadata --format '{{title}}  {{artist}}')
-
-echo "$song_info" 
diff --git a/.config/hypr/scripts/term.sh b/.config/hypr/scripts/term.sh
new file mode 100644
index 00000000..d9ded503
--- /dev/null
+++ b/.config/hypr/scripts/term.sh
@@ -0,0 +1,2 @@
+# term launcher script as hyprland broke it in the config
+kitty
diff --git a/.config/hypr/setup.sh b/.config/hypr/setup.sh
index afa70d5e..a72f8b9a 100644
--- a/.config/hypr/setup.sh
+++ b/.config/hypr/setup.sh
@@ -1,3 +1,4 @@
-#!/bin/zsh
+#!/bin/sh
 
-waybar &
+wl-clip-persist --clipboard regular
+determinate-nixd init
diff --git a/.config/hyprshell/config.toml b/.config/hyprshell/config.toml
new file mode 100644
index 00000000..dc35aa5c
--- /dev/null
+++ b/.config/hyprshell/config.toml
@@ -0,0 +1,61 @@
+version = 3
+
+[windows]
+scale = 8.5
+items_per_row = 5
+
+[windows.overview]
+key = "Tab"
+modifier = "super"
+filter_by = []
+hide_filtered = false
+
+[windows.overview.launcher]
+default_terminal = "ghostty"
+launch_modifier = "ctrl"
+width = 650
+max_items = 5
+show_when_empty = true
+
+[windows.overview.launcher.plugins.applications]
+run_cache_weeks = 4
+show_execs = true
+show_actions_submenu = true
+
+[windows.overview.launcher.plugins.terminal]
+
+[windows.overview.launcher.plugins.shell]
+
+[[windows.overview.launcher.plugins.websearch.engines]]
+url = "https://chatgpt.com/?q={}"
+name = "ChatGpt"
+key = "c"
+
+[[windows.overview.launcher.plugins.websearch.engines]]
+url = "https://www.youtube.com/results?search_query={}"
+name = "YouTube"
+key = "y"
+
+[windows.overview.launcher.plugins.calc]
+
+[windows.overview.launcher.plugins.path]
+
+[windows.overview.launcher.plugins.actions]
+actions = [
+    "lock_screen",
+    "hibernate",
+    "logout",
+    "reboot",
+    "shutdown",
+    "suspend",
+    { custom = { names = [
+    "Kill",
+    "Stop",
+], details = "Kill or stop a process by name", command = 'pkill "{}" && notify-send hyprshell "stopped {}"', icon = "remove" } },
+    { custom = { names = ["Reload Hyprshell"], details = "Reload Hyprshell", command = """sleep 1; hyprshell socat '"Restart"'""", icon = "system-restart" } },
+]
+
+[windows.switch]
+modifier = "alt"
+filter_by = []
+switch_workspaces = false
diff --git a/.config/hyprshell/styles.css b/.config/hyprshell/styles.css
new file mode 100644
index 00000000..8510c1b4
--- /dev/null
+++ b/.config/hyprshell/styles.css
@@ -0,0 +1,57 @@
+:root {
+    --border-color: rgba(90, 90, 120, 0.4);
+    --border-color-active: rgba(9, 239, 9, 0.9);
+
+    --bg-color: rgba(20, 20, 20, 0.9);
+    --bg-color-hover: rgba(40, 40, 50, 1);
+
+    --border-radius: 12px;
+    --border-size: 3px;
+    --border-style: solid;
+    --border-style-secondary: dashed;
+
+    --text-color: rgba(245, 245, 245, 1);
+
+    --window-padding: 2px;
+}
+
+.window {
+}
+
+
+.monitor {
+}
+
+.workspace {
+}
+
+.client {
+}
+
+.client-image {
+}
+
+
+.launcher {
+}
+
+.launcher-input {
+}
+
+.launcher-results {
+}
+
+.launcher-item {
+}
+
+.launcher-exec {
+}
+
+.launcher-key {
+}
+
+.launcher-plugins {
+}
+
+.launcher-plugin {
+}
\ No newline at end of file
diff --git a/.config/kitty/kitty.conf b/.config/kitty/kitty.conf
index b2b42536..46d20a0d 100644
--- a/.config/kitty/kitty.conf
+++ b/.config/kitty/kitty.conf
@@ -11,3 +11,20 @@ cursor_trail_decay 0.03 0.1
 editor nvim 
 allow_hyperlinks yes
 linux_display_server auto
+
+map ctrl+shift+e launch --type=overlay --stdin-source=@screen_scrollback nvim -
+ 
+tab_separator "   "
+tab_bar_style separator
+tab_title_max_length 0
+tab_powerline_style slanted
+tab_title_template " {f'{title[:4]}' if title.rindex(title[-1]) + 1 > 30 else (title.center(6) if (title.rindex(title[-1]) + 1) % 2 == 0 else title.center(5))}"
+
+active_tab_font_style   bold
+inactive_tab_font_style bold
+
+active_tab_foreground   #6c6c6c
+active_tab_background   #000000
+inactive_tab_foreground #303030
+inactive_tab_background #000000
+map ctrl+shift+t new_tab_with_cwd
diff --git a/.config/mouseless/config.yaml b/.config/mouseless/config.yaml
new file mode 100644
index 00000000..8fc6c042
--- /dev/null
+++ b/.config/mouseless/config.yaml
@@ -0,0 +1,428 @@
+app_version: 0.4.0-preview.2
+behavior_configs:
+  - base_move_speed: 5.0
+    base_wheel_speed: 16.0
+    free_mode_auto_off_s: 10
+    grid_action_level: subgrid
+    hide_cursor_on_click: false
+    hide_location: bottom_left
+    initial_action_location: screen_center
+    initial_overlay_monitor: last_used
+    move_duration_ms: 100
+    move_real_cursor_with_virtual: false
+    move_speed_multiplier: 3.0
+    movement_easing: 0.1
+    multi_action_timeout_ms: 400
+    name: main_behavior
+    send_escape_after_global_alt_tap__windows: true
+    tap_threshold_ms: 300
+    wheel_easing: 0.1
+    wheel_speed_multiplier: 4.0
+    wheel_step_size: 100.0
+    wheel_step_size_large: 500.0
+classname: AppConfig
+custom_monitor_assignments: []
+display_input: none
+event_tap_location: hid_head
+grid_configs:
+  - always_show_subgrid: false
+    grid_defn:
+      - border_width: 0.0
+        callback: build_cell_strings
+        keys: ASDFG HJKL;
+        num_cells_x: 10
+        num_cells_y: 1
+      - border_width: 1.0
+        callback: build_cell_strings
+        keys: QWERT YUIOP ASDFG HJKL; ZXCVB NM,./
+        num_cells_x: 1
+        num_cells_y: 26
+      - border_width: 0.0
+        callback: apply_strings_and_subgrid_to_cells
+        keys: ""
+        num_cells_x: 2
+        num_cells_y: 1
+    hold_subgrid_key_for_nudge: false
+    name: position_based_columns
+    nudges_per_cell: 4
+    strategy: subgrid
+    subgrid_dims:
+      - 10
+      - 3
+    subgrid_mouse_action_keys: QWERT YUIOP ASDFG HJKL; ZXCVB NM,./
+keyboard_layout:
+  id: com.apple.keylayout.ABC
+  name: ABC
+  vk_to_char:
+    0:
+      - a
+      - A
+    1:
+      - s
+      - S
+    2:
+      - d
+      - D
+    3:
+      - f
+      - F
+    4:
+      - h
+      - H
+    5:
+      - g
+      - G
+    6:
+      - z
+      - Z
+    7:
+      - x
+      - X
+    8:
+      - c
+      - C
+    9:
+      - v
+      - V
+    10:
+      - "\xA7"
+      - "\xB1"
+    11:
+      - b
+      - B
+    12:
+      - q
+      - Q
+    13:
+      - w
+      - W
+    14:
+      - e
+      - E
+    15:
+      - r
+      - R
+    16:
+      - y
+      - Y
+    17:
+      - t
+      - T
+    18:
+      - "1"
+      - "!"
+    19:
+      - "2"
+      - "@"
+    20:
+      - "3"
+      - "#"
+    21:
+      - "4"
+      - $
+    22:
+      - "6"
+      - ^
+    23:
+      - "5"
+      - "%"
+    24:
+      - "="
+      - +
+    25:
+      - "9"
+      - (
+    26:
+      - "7"
+      - "&"
+    27:
+      - "-"
+      - _
+    28:
+      - "8"
+      - "*"
+    29:
+      - "0"
+      - )
+    30:
+      - "]"
+      - "}"
+    31:
+      - o
+      - O
+    32:
+      - u
+      - U
+    33:
+      - "["
+      - "{"
+    34:
+      - i
+      - I
+    35:
+      - p
+      - P
+    36: "\r"
+    37:
+      - l
+      - L
+    38:
+      - j
+      - J
+    39:
+      - "'"
+      - '"'
+    40:
+      - k
+      - K
+    41:
+      - ;
+      - ":"
+    42:
+      - \
+      - "|"
+    43:
+      - ","
+      - <
+    44:
+      - /
+      - "?"
+    45:
+      - n
+      - N
+    46:
+      - m
+      - M
+    47:
+      - .
+      - ">"
+    48: "\t"
+    49: " "
+    50:
+      - "`"
+      - "~"
+    51: "\b"
+    52: "\x03"
+    53: "\e"
+    65: .
+    66:
+      - "\x1D"
+      - "*"
+    67: "*"
+    69: +
+    70:
+      - "\x1C"
+      - +
+    71: "\e"
+    72:
+      - "\x1F"
+      - "="
+    75: /
+    76: "\x03"
+    77:
+      - "\x1E"
+      - /
+    78: "-"
+    81: "="
+    82: "0"
+    83: "1"
+    84: "2"
+    85: "3"
+    86: "4"
+    87: "5"
+    88: "6"
+    89: "7"
+    91: "8"
+    92: "9"
+    96: "\x10"
+    97: "\x10"
+    98: "\x10"
+    99: "\x10"
+    100: "\x10"
+    101: "\x10"
+    102: "\x10"
+    103: "\x10"
+    104: "\x10"
+    105: "\x10"
+    106: "\x10"
+    107: "\x10"
+    108: "\x10"
+    109: "\x10"
+    110: "\x10"
+    111: "\x10"
+    112: "\x10"
+    113: "\x10"
+    114: "\x05"
+    115: "\x01"
+    116: "\v"
+    117: "\x7F"
+    118: "\x10"
+    119: "\x04"
+    120: "\x10"
+    121: "\f"
+    122: "\x10"
+    123: "\x1C"
+    124: "\x1D"
+    125: "\x1F"
+    126: "\x1E"
+keymaps:
+  - entries:
+      back mouse button: null
+      back mouse button (w/o overlay): null
+      close UI element: Escape
+      cycle click count: null
+      cycle font: null
+      cycle font reverse: null
+      cycle grid action level: null
+      cycle mouse action type: null
+      cycle mouse button: null
+      decrease overlay opacity: ArrowDown
+      edit config: Tab
+      enter free mode: null
+      execute mouse action: Space
+      execute mouse move: ControlRight tap
+      exit free mode: Escape
+      forward mouse button: null
+      forward mouse button (w/o overlay): null
+      hide overlay: Escape
+      hold for back button: null
+      hold for drag: CommandLeft
+      hold for forward button: null
+      hold for middle button: null
+      hold for move: OptionLeft
+      hold for right button: ControlLeft
+      hold for speed decrease: null
+      hold for speed increase: ShiftLeft
+      increase overlay opacity: ArrowUp
+      jump to bottom: null
+      jump to left edge: null
+      jump to right edge: null
+      jump to top: null
+      left mouse button: null
+      left mouse button (w/o overlay): null
+      middle mouse button: null
+      middle mouse button (w/o overlay): null
+      move down: null
+      move left: null
+      move right: null
+      move up: null
+      release hold/drag: null
+      repeat last mouse action: null
+      right mouse button: null
+      right mouse button (w/o overlay): null
+      show overlay: cmd+shift+alt+ctrl+z
+      subgrid nudge down: null
+      subgrid nudge left: null
+      subgrid nudge right: null
+      subgrid nudge up: null
+      switch monitor left: null
+      switch monitor right: null
+      toggle continuous mode: null
+      toggle continuous mode until closed: null
+      toggle free mode: ControlRight tap
+      toggle overlay: null
+      toggle overlay lock: null
+      undo last key: Backspace
+      wheel down: J
+      wheel down fast: null
+      wheel left: H
+      wheel left fast: null
+      wheel right: L
+      wheel right fast: null
+      wheel step down: null
+      wheel step down large: null
+      wheel step left: null
+      wheel step left large: null
+      wheel step right: null
+      wheel step right large: null
+      wheel step up: null
+      wheel step up large: null
+      wheel up: K
+      wheel up fast: null
+    name: mac
+monitor_assignment_mode: auto
+name: ""
+style_configs:
+  - always_on_subgrid_rgba:
+      - 0.58
+      - 1.0
+      - 0.42
+      - 0.2
+    background_rgba:
+      - 0.05
+      - 0.2
+      - 0.0
+      - 0.35
+    char_spacing_cell_width_ratio: 0.5
+    char_spacing_font_size_ratio: 0.5
+    char_spacing_strategy: cell_width_relative
+    cursor_drag_rgba:
+      - 0.0
+      - 0.5
+      - 1.0
+      - 0.7
+    cursor_move_rgba:
+      - 0.75
+      - 0.41
+      - 0.92
+      - 0.7
+    cursor_other_rgba:
+      - 1.0
+      - 1.0
+      - 1.0
+      - 0.7
+    cursor_rgba:
+      - 0.34
+      - 1.0
+      - 0.0
+      - 0.8
+    cursor_right_button_rgba:
+      - 0.92
+      - 0.32
+      - 0.32
+      - 0.7
+    cursor_size: 7
+    font_family: "[Apple System Font]"
+    font_size_multiplier: 0.5
+    font_weight: 500
+    grid_line_style: dots
+    grid_rgba:
+      - 0.58
+      - 1.0
+      - 0.42
+      - 1.0
+    highlight_animation_ms: 0
+    highlight_rgba:
+      - 0.0
+      - 1.0
+      - 0.05
+      - 0.2
+    name: dark_bg
+    show_initial_highlight: false
+    subgrid_font_size_multiplier: 0.75
+    subgrid_rgba:
+      - 0.58
+      - 1.0
+      - 0.42
+      - 1.0
+    subgrid_text_rgba:
+      - 0.996078431372549
+      - 0.996078431372549
+      - 0.996078431372549
+      - 1.0
+    text_rgba:
+      - 1.0
+      - 1.0
+      - 1.0
+      - 1.0
+    text_shadow_blur_radius: 4.0
+    text_shadow_offset:
+      - 0.0
+      - 0.0
+    text_shadow_rgba:
+      - 0.28
+      - 1.0
+      - 0.0
+      - 1.0
+    text_y_offset: 0.0
+    window_opacity: 1.0
diff --git a/.config/nushell/.gitignore b/.config/nushell/.gitignore
new file mode 100644
index 00000000..a3e737a8
--- /dev/null
+++ b/.config/nushell/.gitignore
@@ -0,0 +1 @@
+history.txt
diff --git a/.config/nushell/archive/old.nix.nu b/.config/nushell/archive/old.nix.nu
new file mode 100644
index 00000000..1934c4e1
--- /dev/null
+++ b/.config/nushell/archive/old.nix.nu
@@ -0,0 +1,127 @@
+
+# AUTHOR: Conner Ohnesorge
+# nix flake show --impure --json --quiet | from json
+# Output:
+# ╭────────────┬──────────────────────────────────────────────────────────────────────────────────╮
+# │            │ ╭──────┬─────────╮                                                               │
+# │ containers │ │ type │ unknown │                                                               │
+# │            │ ╰──────┴─────────╯                                                               │
+# │            │ ╭────────────────┬─────────────────────────────────────────────────────────────╮ │
+# │ packages   │ │                │ ╭──────┬───────────────────╮                                │ │
+# │            │ │ aarch64-darwin │ │ api  │ {record 0 fields} │                                │ │
+# │            │ │                │ │ docs │ {record 0 fields} │                                │ │
+# │            │ │                │ │ web  │ {record 0 fields} │                                │ │
+# │            │ │                │ ╰──────┴───────────────────╯                                │ │
+# │            │ │                │ ╭──────┬───────────────────╮                                │ │
+# │            │ │ aarch64-linux  │ │ api  │ {record 0 fields} │                                │ │
+# │            │ │                │ │ docs │ {record 0 fields} │                                │ │
+# │            │ │                │ │ web  │ {record 0 fields} │                                │ │
+# │            │ │                │ ╰──────┴───────────────────╯                                │ │
+# │            │ │                │ ╭──────┬───────────────────╮                                │ │
+# │            │ │ x86_64-darwin  │ │ api  │ {record 0 fields} │                                │ │
+# │            │ │                │ │ docs │ {record 0 fields} │                                │ │
+# │            │ │                │ │ web  │ {record 0 fields} │                                │ │
+# │            │ │                │ ╰──────┴───────────────────╯                                │ │
+# │            │ │                │ ╭──────┬──────────────────────────────────────────────────╮ │ │
+# │            │ │ x86_64-linux   │ │      │ ╭─────────────┬────────────╮                     │ │ │
+# │            │ │                │ │ api  │ │ description │ API server │                     │ │ │
+# │            │ │                │ │      │ │ name        │ api-0.1.0  │                     │ │ │
+# │            │ │                │ │      │ │ type        │ derivation │                     │ │ │
+# │            │ │                │ │      │ ╰─────────────┴────────────╯                     │ │ │
+# │            │ │                │ │      │ ╭─────────────┬────────────────────────────────╮ │ │ │
+# │            │ │                │ │ docs │ │ description │ API and Platform Documentation │ │ │ │
+# │            │ │                │ │      │ │ name        │ docs-0.1.0                     │ │ │ │
+# │            │ │                │ │      │ │ type        │ derivation                     │ │ │ │
+# │            │ │                │ │      │ ╰─────────────┴────────────────────────────────╯ │ │ │
+# │            │ │                │ │      │ ╭─────────────┬────────────╮                     │ │ │
+# │            │ │                │ │ web  │ │ description │ Web UI     │                     │ │ │
+# │            │ │                │ │      │ │ name        │ web-0.1.0  │                     │ │ │
+# │            │ │                │ │      │ │ type        │ derivation │                     │ │ │
+# │            │ │                │ │      │ ╰─────────────┴────────────╯                     │ │ │
+# │            │ │                │ ╰──────┴──────────────────────────────────────────────────╯ │ │
+# │            │ ╰────────────────┴─────────────────────────────────────────────────────────────╯ │
+# ╰────────────┴──────────────────────────────────────────────────────────────────────────────────╯
+#
+#
+# Suggested completions for 'nix build .#<TAB>':
+#
+#   packages.aarch64-darwin.api
+#   packages.aarch64-linux.api
+#   packages.x86_64-darwin.api
+#   packages.x86_64-linux.api
+#   packages.aarch64-darwin.docs
+#   packages.aarch64-linux.docs
+#   packages.x86_64-darwin.docs
+#   packages.x86_64-linux.docs
+#   packages.aarch64-darwin.web
+#   packages.aarch64-linux.web
+#   packages.x86_64-darwin.web
+#   packages.x86_64-linux.web
+
+
+
+let systems = nix flake show --impure --json --quiet --all-systems | from json 
+
+let targets = [
+    "packages",
+    "containers",
+    "devShells",
+    "apps",
+    "checks",
+]
+
+let allCompletions = $targets
+| each {
+    |target|
+    let intersystems = $systems | get -i $target
+    let transystems = $intersystems | transpose
+    let transystemsLen = $transystems | length
+    if $transystemsLen == 0 {
+        null
+    }
+    let outie = $transystems | enumerate | each {
+        |elt| $elt.item | get column1 | transpose | get column0 | each { |sub|
+                    {
+                        value: $"packages.($elt.item | get column0).($sub)",
+                        description: $"packages.($elt.item | get column0).($sub)",
+                        style: green
+                    }
+        }
+    }
+    $outie
+}
+print $allCompletions
+
+let transystems = $systems | get "packages" | transpose
+# let ess = $transystems | enumerate | 
+#     each {
+#             |elt| 
+#             let subsid = $elt.item | get column1 | transpose | get column0
+#             $subsid | each {
+#                     |sub| print $sub
+#                     $"packages.($elt.item | get column0).($sub)" 
+#             }
+#     }
+let outie = $transystems | enumerate | each {
+    |elt| $elt.item | get column1 | transpose | get column0 | each { |sub| 
+                {
+                    value: $"packages.($elt.item | get column0).($sub)",
+                    description: $"packages.($elt.item | get column0).($sub)",
+                    style: green
+                }
+    }
+}
+let completions = $outie | flatten 
+
+module nixb {
+    def build-targets [] {
+        $completions
+    }
+
+    export def build [animal: string@build-targets] {
+        nix build $".#($animal)"
+    }
+}
+
+use nixb
+print "used nixb"
diff --git a/.config/nushell/base_completions.nu b/.config/nushell/base_completions.nu
new file mode 100644
index 00000000..a5308fb7
--- /dev/null
+++ b/.config/nushell/base_completions.nu
@@ -0,0 +1,75 @@
+def latest [] {
+    git add . 
+    git commit -m "latest" 
+    git push
+}
+
+let carapace_completer = {|spans|
+    carapace $spans.0 nushell ...$spans | from json
+}
+
+let fish_completer = {|spans|
+    fish --command $'complete "--do-complete=($spans | str join " ")"'
+    | from tsv --flexible --noheaders --no-infer
+    | rename value description
+}
+
+# This completer will use carapace by default
+let external_completer = {|spans|
+    let expanded_alias = scope aliases
+    | where name == $spans.0
+    | get -i 0.expansion
+
+    let spans = if $expanded_alias != null {
+        $spans
+        | skip 1
+        | prepend ($expanded_alias | split row ' ' | take 1)
+    } else {
+        $spans
+    }
+
+    match $spans.0 {
+        # carapace completions are incorrect for nu
+        nu => $fish_completer
+        # fish completes commits and branch names in a nicer way
+        git => $fish_completer
+        # fish has better completions for nix
+        nix => $fish_completer
+        # fish has better completions for wg-quick
+        wg-quick => $fish_completer
+        # fish has better completions for wg
+        wg => $fish_completer
+        # fish has better completions for systemctl
+        systemctl => $fish_completer
+        # fish has better completions for xdg-mime
+        xdg-mime => $fish_completer
+        # fish has better completions for objdump
+        objdump => $fish_completer
+        # fish has better completions for zig
+        zig => $fish_completer
+        # fish has better completions for pkg-config
+        pkg-config => $fish_completer
+        # fish has better completions for meson
+        meson => $fish_completer
+        # fish has better completions for gtkwave
+        gtkwave => $fish_completer
+        # fish has better completions for networkctl
+        networkctl => $fish_completer
+        # fish has better completions for pandoc
+        pandoc => $fish_completer
+        # fish has better completions for uv
+        uv => $fish_completer
+        _ => $carapace_completer
+    } | do $in $spans
+}
+
+$env.config = {
+    # ...
+    completions: {
+        external: {
+            enable: true
+            completer: $external_completer
+        }
+    }
+    # ...
+}
diff --git a/.config/nushell/carapace.nu b/.config/nushell/carapace.nu
new file mode 100644
index 00000000..ab4463d9
--- /dev/null
+++ b/.config/nushell/carapace.nu
@@ -0,0 +1,30 @@
+# $env.PATH = ($env.PATH | split row (char esep) | prepend "/home/connerohnesorge/.config/carapace/bin")
+
+def --env get-env [name] { $env | get $name }
+def --env set-env [name, value] { load-env { $name: $value } }
+def --env unset-env [name] { hide-env $name }
+
+let carapace_completer = {|spans|
+  # if the current command is an alias, get it's expansion
+  let expanded_alias = (scope aliases | where name == $spans.0 | get -i 0 | get -i expansion)
+
+  # overwrite
+  let spans = (if $expanded_alias != null  {
+    # put the first word of the expanded alias first in the span
+    $spans | skip 1 | prepend ($expanded_alias | split row " " | take 1)
+  } else {
+    $spans
+  })
+
+  carapace $spans.0 nushell ...$spans
+  | from json
+}
+
+mut current = (($env | default {} config).config | default {} completions)
+$current.completions = ($current.completions | default {} external)
+$current.completions.external = ($current.completions.external
+| default true enable
+| default $carapace_completer completer)
+
+$env.config = $current
+
diff --git a/.config/nushell/config.nu b/.config/nushell/config.nu
new file mode 100644
index 00000000..597038ee
--- /dev/null
+++ b/.config/nushell/config.nu
@@ -0,0 +1,776 @@
+# Nushell Config File
+#
+# version = "0.100.0"
+
+$env.config.buffer_editor = "nvim"
+
+$env.config = {
+    show_banner: false 
+
+    ls: {
+        use_ls_colors: true # use the LS_COLORS environment variable to colorize output
+        clickable_links: true # enable or disable clickable links. Your terminal has to support links.
+    }
+
+    rm: {
+        always_trash: false # always act as if -t was given. Can be overridden with -p
+    }
+
+    table: {
+        mode: rounded # basic, compact, compact_double, light, thin, with_love, rounded, reinforced, heavy, none, other
+        index_mode: always # "always" show indexes, "never" show indexes, "auto" = show indexes when a table has "index" column
+        show_empty: true # show 'empty list' and 'empty record' placeholders for command output
+        padding: { left: 1, right: 1 } # a left right padding of each column in a table
+        trim: {
+            methodology: wrapping # wrapping or truncating
+            wrapping_try_keep_words: true # A strategy used by the 'wrapping' methodology
+            truncating_suffix: "..." # A suffix used by the 'truncating' methodology
+        }
+        header_on_separator: false # show header text on separator/border line
+        footer_inheritance: false # render footer in parent table if child is big enough (extended table option)
+    }
+
+    error_style: "fancy" 
+
+    # Whether an error message should be printed if an error of a certain kind is triggered.
+    display_errors: {
+        exit_code: false # assume the external command prints an error message
+        # Core dump errors are always printed, and SIGPIPE never triggers an error.
+        # The setting below controls message printing for termination by all other signals.
+        termination_signal: true
+    }
+
+    # datetime_format determines what a datetime rendered in the shell would look like.
+    # Behavior without this configuration point will be to "humanize" the datetime display,
+    # showing something like "a day ago."
+    datetime_format: {
+        # normal: '%a, %d %b %Y %H:%M:%S %z'    # shows up in displays of variables or other datetime's outside of tables
+        # table: '%m/%d/%y %I:%M:%S%p'          # generally shows up in tabular outputs such as ls. commenting this out will change it to the default human readable datetime format
+    }
+
+    explore: {
+        status_bar_background: { fg: "#1D1F21", bg: "#C4C9C6" },
+        command_bar_text: { fg: "#C4C9C6" },
+        highlight: { fg: "black", bg: "yellow" },
+        status: {
+            error: { fg: "white", bg: "red" },
+            warn: {}
+            info: {}
+        },
+        selected_cell: { bg: light_blue },
+    }
+
+    hooks: {
+        pre_prompt: [{ ||
+      if (which direnv | is-empty) {
+        return
+      }
+
+      direnv export json | from json | default {} | load-env
+      if 'ENV_CONVERSIONS' in $env and 'PATH' in $env.ENV_CONVERSIONS {
+        $env.PATH = do $env.ENV_CONVERSIONS.PATH.from_string $env.PATH
+      }
+    }] # run before the prompt is shown
+        pre_execution: [{ null }] # run before the repl input is run
+        env_change: {
+            PWD: [{|before, after| null }] # run if the PWD environment is different since the last repl input
+        }
+        display_output: "if (term size).columns >= 100 { table -e } else { table }" # run to display the output of a pipeline
+        command_not_found: { null } # return an error message when a command is not found
+    }
+    history: {
+        max_size: 100_000 # Session has to be reloaded for this to take effect
+        sync_on_enter: true # Enable to share history between multiple sessions, else you have to close the session to write history to file
+        file_format: "plaintext" # "sqlite" or "plaintext"
+        isolation: false # only available with sqlite file_format. true enables history isolation, false disables it. true will allow the history to be isolated to the current session using up/down arrows. false will allow the history to be shared across all sessions.
+    }
+
+    completions: {
+        case_sensitive: false # set to true to enable case-sensitive completions
+        quick: true    # set this to false to prevent auto-selecting completions when only one remains
+        partial: true    # set this to false to prevent partial filling of the prompt
+        algorithm: "prefix"    # prefix or fuzzy
+        sort: "smart" # "smart" (alphabetical for prefix matching, fuzzy score for fuzzy matching) or "alphabetical"
+        external: {
+            enable: true # set to false to prevent nushell looking into $env.PATH to find more suggestions, `false` recommended for WSL users as this look up may be very slow
+            max_results: 100 # setting it lower can improve completion performance at the cost of omitting some options
+            completer: null # check 'carapace_completer' above as an example
+        }
+        use_ls_colors: true # set this to true to enable file/path/directory completions using LS_COLORS
+    }
+
+    cursor_shape: {
+        emacs: line # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (line is the default)
+        vi_insert: block # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (block is the default)
+        vi_normal: underscore # block, underscore, line, blink_block, blink_underscore, blink_line, inherit to skip setting cursor shape (underscore is the default)
+    }
+
+    footer_mode: 25 # always, never, number_of_rows, auto
+    float_precision: 2 # the precision for displaying floats in tables
+    buffer_editor: null # command that will be used to edit the current line buffer with ctrl+o, if unset fallback to $env.VISUAL and $env.EDITOR
+    use_ansi_coloring: true
+    bracketed_paste: true # enable bracketed paste, currently useless on windows
+    edit_mode: vi # emacs, vi
+    shell_integration: {
+        # osc2 abbreviates the path if in the home_dir, sets the tab/window title, shows the running command in the tab/window title
+        osc2: true
+        # osc7 is a way to communicate the path to the terminal, this is helpful for spawning new tabs in the same directory
+        osc7: true
+        # osc8 is also implemented as the deprecated setting ls.show_clickable_links, it shows clickable links in ls output if your terminal supports it. show_clickable_links is deprecated in favor of osc8
+        osc8: true
+        # osc9_9 is from ConEmu and is starting to get wider support. It's similar to osc7 in that it communicates the path to the terminal
+        osc9_9: false
+        # osc133 is several escapes invented by Final Term which include the supported ones below.
+        # 133;A - Mark prompt start
+        # 133;B - Mark prompt end
+        # 133;C - Mark pre-execution
+        # 133;D;exit - Mark execution finished with exit code
+        # This is used to enable terminals to know where the prompt is, the command is, where the command finishes, and where the output of the command is
+        osc133: true
+        # osc633 is closely related to osc133 but only exists in visual studio code (vscode) and supports their shell integration features
+        # 633;A - Mark prompt start
+        # 633;B - Mark prompt end
+        # 633;C - Mark pre-execution
+        # 633;D;exit - Mark execution finished with exit code
+        # 633;E - Explicitly set the command line with an optional nonce
+        # 633;P;Cwd=<path> - Mark the current working directory and communicate it to the terminal
+        # and also helps with the run recent menu in vscode
+        osc633: true
+        # reset_application_mode is escape \x1b[?1l and was added to help ssh work better
+        reset_application_mode: true
+    }
+    render_right_prompt_on_last_line: false # true or false to enable or disable right prompt to be rendered on last line of the prompt.
+    use_kitty_protocol: false # enables keyboard enhancement protocol implemented by kitty console, only if your terminal support this.
+    highlight_resolved_externals: false # true enables highlighting of external commands in the repl resolved by which.
+    recursion_limit: 50 # the maximum number of times nushell allows recursion before stopping it
+
+    plugins: {} # Per-plugin configuration. See https://www.nushell.sh/contributor-book/plugins.html#configuration.
+
+    plugin_gc: {
+        # Configuration for plugin garbage collection
+        default: {
+            enabled: true # true to enable stopping of inactive plugins
+            stop_after: 10sec # how long to wait after a plugin is inactive to stop it
+        }
+        plugins: {
+            # alternate configuration for specific plugins, by name, for example:
+            #
+            # gstat: {
+            #     enabled: false
+            # }
+        }
+    }
+    menus: [
+        # Configuration for default nushell menus
+        # Note the lack of source parameter
+        {
+            name: completion_menu
+            only_buffer_difference: false
+            marker: "| "
+            type: {
+                layout: columnar
+                columns: 4
+                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
+                col_padding: 2
+            }
+            style: {
+                text: green
+                selected_text: { attr: r }
+                description_text: yellow
+                match_text: { attr: u }
+                selected_match_text: { attr: ur }
+            }
+        }
+        {
+            name: ide_completion_menu
+            only_buffer_difference: false
+            marker: "| "
+            type: {
+                layout: ide
+                min_completion_width: 0,
+                max_completion_width: 50,
+                max_completion_height: 10, # will be limited by the available lines in the terminal
+                padding: 0,
+                border: true,
+                cursor_offset: 0,
+                description_mode: "prefer_right"
+                min_description_width: 0
+                max_description_width: 50
+                max_description_height: 10
+                description_offset: 1
+                # If true, the cursor pos will be corrected, so the suggestions match up with the typed text
+                #
+                # C:\> str
+                #      str join
+                #      str trim
+                #      str split
+                correct_cursor_pos: false
+            }
+            style: {
+                text: green
+                selected_text: { attr: r }
+                description_text: yellow
+                match_text: { attr: u }
+                selected_match_text: { attr: ur }
+            }
+        }
+        {
+            name: history_menu
+            only_buffer_difference: true
+            marker: "? "
+            type: {
+                layout: list
+                page_size: 10
+            }
+            style: {
+                text: green
+                selected_text: green_reverse
+                description_text: yellow
+            }
+        }
+        {
+            name: help_menu
+            only_buffer_difference: true
+            marker: "? "
+            type: {
+                layout: description
+                columns: 4
+                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
+                col_padding: 2
+                selection_rows: 4
+                description_rows: 10
+            }
+            style: {
+                text: green
+                selected_text: green_reverse
+                description_text: yellow
+            }
+        }
+    ]
+
+    keybindings: [
+        {
+            name: completion_menu
+            modifier: none
+            keycode: tab
+            mode: [emacs vi_normal vi_insert]
+            event: {
+                until: [
+                    { send: menu name: completion_menu }
+                    { send: menunext }
+                    { edit: complete }
+                ]
+            }
+        }
+        {
+            name: completion_previous_menu
+            modifier: shift
+            keycode: backtab
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: menuprevious }
+        }
+        {
+            name: ide_completion_menu
+            modifier: control
+            keycode: space
+            mode: [emacs vi_normal vi_insert]
+            event: {
+                until: [
+                    { send: menu name: ide_completion_menu }
+                    { send: menunext }
+                    { edit: complete }
+                ]
+            }
+        }
+        {
+            name: history_menu
+            modifier: control
+            keycode: char_r
+            mode: [emacs, vi_insert, vi_normal]
+            event: { send: menu name: history_menu }
+        }
+        {
+            name: help_menu
+            modifier: none
+            keycode: f1
+            mode: [emacs, vi_insert, vi_normal]
+            event: { send: menu name: help_menu }
+        }
+        {
+            name: next_page_menu
+            modifier: control
+            keycode: char_x
+            mode: emacs
+            event: { send: menupagenext }
+        }
+        {
+            name: undo_or_previous_page_menu
+            modifier: control
+            keycode: char_z
+            mode: emacs
+            event: {
+                until: [
+                    { send: menupageprevious }
+                    { edit: undo }
+                ]
+            }
+        }
+        {
+            name: escape
+            modifier: none
+            keycode: escape
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: esc }    # NOTE: does not appear to work
+        }
+        {
+            name: cancel_command
+            modifier: control
+            keycode: char_c
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: ctrlc }
+        }
+        {
+            name: quit_shell
+            modifier: control
+            keycode: char_d
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: ctrld }
+        }
+        {
+            name: clear_screen
+            modifier: control
+            keycode: char_l
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: clearscreen }
+        }
+        {
+            name: search_history
+            modifier: control
+            keycode: char_q
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: searchhistory }
+        }
+        {
+            name: open_command_editor
+            modifier: control
+            keycode: char_o
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: openeditor }
+        }
+        {
+            name: move_up
+            modifier: none
+            keycode: up
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: menuup }
+                    { send: up }
+                ]
+            }
+        }
+        {
+            name: move_down
+            modifier: none
+            keycode: down
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: menudown }
+                    { send: down }
+                ]
+            }
+        }
+        {
+            name: move_left
+            modifier: none
+            keycode: left
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: menuleft }
+                    { send: left }
+                ]
+            }
+        }
+        {
+            name: move_right_or_take_history_hint
+            modifier: none
+            keycode: right
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: historyhintcomplete }
+                    { send: menuright }
+                    { send: right }
+                ]
+            }
+        }
+        {
+            name: move_one_word_left
+            modifier: control
+            keycode: left
+            mode: [emacs, vi_normal, vi_insert]
+            event: { edit: movewordleft }
+        }
+        {
+            name: move_one_word_right_or_take_history_hint
+            modifier: control
+            keycode: right
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: historyhintwordcomplete }
+                    { edit: movewordright }
+                ]
+            }
+        }
+        {
+            name: move_to_line_start
+            modifier: none
+            keycode: home
+            mode: [emacs, vi_normal, vi_insert]
+            event: { edit: movetolinestart }
+        }
+        {
+            name: move_to_line_start
+            modifier: control
+            keycode: char_a
+            mode: [emacs, vi_normal, vi_insert]
+            event: { edit: movetolinestart }
+        }
+        {
+            name: move_to_line_end_or_take_history_hint
+            modifier: none
+            keycode: end
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: historyhintcomplete }
+                    { edit: movetolineend }
+                ]
+            }
+        }
+        {
+            name: move_to_line_end_or_take_history_hint
+            modifier: control
+            keycode: char_e
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: historyhintcomplete }
+                    { edit: movetolineend }
+                ]
+            }
+        }
+        {
+            name: move_to_line_start
+            modifier: control
+            keycode: home
+            mode: [emacs, vi_normal, vi_insert]
+            event: { edit: movetolinestart }
+        }
+        {
+            name: move_to_line_end
+            modifier: control
+            keycode: end
+            mode: [emacs, vi_normal, vi_insert]
+            event: { edit: movetolineend }
+        }
+        {
+            name: move_down
+            modifier: control
+            keycode: char_n
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: menudown }
+                    { send: down }
+                ]
+            }
+        }
+        {
+            name: move_up
+            modifier: control
+            keycode: char_p
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    { send: menuup }
+                    { send: up }
+                ]
+            }
+        }
+        {
+            name: delete_one_character_backward
+            modifier: none
+            keycode: backspace
+            mode: [emacs, vi_insert]
+            event: { edit: backspace }
+        }
+        {
+            name: delete_one_word_backward
+            modifier: control
+            keycode: backspace
+            mode: [emacs, vi_insert]
+            event: { edit: backspaceword }
+        }
+        {
+            name: delete_one_character_forward
+            modifier: none
+            keycode: delete
+            mode: [emacs, vi_insert]
+            event: { edit: delete }
+        }
+        {
+            name: delete_one_character_forward
+            modifier: control
+            keycode: delete
+            mode: [emacs, vi_insert]
+            event: { edit: delete }
+        }
+        {
+            name: delete_one_character_backward
+            modifier: control
+            keycode: char_h
+            mode: [emacs, vi_insert]
+            event: { edit: backspace }
+        }
+        {
+            name: delete_one_word_backward
+            modifier: control
+            keycode: char_w
+            mode: [emacs, vi_insert]
+            event: { edit: backspaceword }
+        }
+        {
+            name: move_left
+            modifier: none
+            keycode: backspace
+            mode: vi_normal
+            event: { edit: moveleft }
+        }
+        {
+            name: newline_or_run_command
+            modifier: none
+            keycode: enter
+            mode: emacs
+            event: { send: enter }
+        }
+        {
+            name: move_left
+            modifier: control
+            keycode: char_b
+            mode: emacs
+            event: {
+                until: [
+                    { send: menuleft }
+                    { send: left }
+                ]
+            }
+        }
+        {
+            name: move_right_or_take_history_hint
+            modifier: control
+            keycode: char_f
+            mode: emacs
+            event: {
+                until: [
+                    { send: historyhintcomplete }
+                    { send: menuright }
+                    { send: right }
+                ]
+            }
+        }
+        {
+            name: redo_change
+            modifier: control
+            keycode: char_g
+            mode: emacs
+            event: { edit: redo }
+        }
+        {
+            name: undo_change
+            modifier: control
+            keycode: char_z
+            mode: emacs
+            event: { edit: undo }
+        }
+        {
+            name: paste_before
+            modifier: control
+            keycode: char_y
+            mode: emacs
+            event: { edit: pastecutbufferbefore }
+        }
+        {
+            name: cut_word_left
+            modifier: control
+            keycode: char_w
+            mode: emacs
+            event: { edit: cutwordleft }
+        }
+        {
+            name: cut_line_to_end
+            modifier: control
+            keycode: char_k
+            mode: emacs
+            event: { edit: cuttolineend }
+        }
+        {
+            name: cut_line_from_start
+            modifier: control
+            keycode: char_u
+            mode: emacs
+            event: { edit: cutfromstart }
+        }
+        {
+            name: swap_graphemes
+            modifier: control
+            keycode: char_t
+            mode: emacs
+            event: { edit: swapgraphemes }
+        }
+        {
+            name: move_one_word_left
+            modifier: alt
+            keycode: left
+            mode: emacs
+            event: { edit: movewordleft }
+        }
+        {
+            name: move_one_word_right_or_take_history_hint
+            modifier: alt
+            keycode: right
+            mode: emacs
+            event: {
+                until: [
+                    { send: historyhintwordcomplete }
+                    { edit: movewordright }
+                ]
+            }
+        }
+        {
+            name: move_one_word_left
+            modifier: alt
+            keycode: char_b
+            mode: emacs
+            event: { edit: movewordleft }
+        }
+        {
+            name: move_one_word_right_or_take_history_hint
+            modifier: alt
+            keycode: char_f
+            mode: emacs
+            event: {
+                until: [
+                    { send: historyhintwordcomplete }
+                    { edit: movewordright }
+                ]
+            }
+        }
+        {
+            name: delete_one_word_forward
+            modifier: alt
+            keycode: delete
+            mode: emacs
+            event: { edit: deleteword }
+        }
+        {
+            name: delete_one_word_backward
+            modifier: alt
+            keycode: backspace
+            mode: emacs
+            event: { edit: backspaceword }
+        }
+        {
+            name: delete_one_word_backward
+            modifier: alt
+            keycode: char_m
+            mode: emacs
+            event: { edit: backspaceword }
+        }
+        {
+            name: cut_word_to_right
+            modifier: alt
+            keycode: char_d
+            mode: emacs
+            event: { edit: cutwordright }
+        }
+        {
+            name: upper_case_word
+            modifier: alt
+            keycode: char_u
+            mode: emacs
+            event: { edit: uppercaseword }
+        }
+        {
+            name: lower_case_word
+            modifier: alt
+            keycode: char_l
+            mode: emacs
+            event: { edit: lowercaseword }
+        }
+        {
+            name: capitalize_char
+            modifier: alt
+            keycode: char_c
+            mode: emacs
+            event: { edit: capitalizechar }
+        }
+        # The following bindings with `*system` events require that Nushell has
+        # been compiled with the `system-clipboard` feature.
+        # If you want to use the system clipboard for visual selection or to
+        # paste directly, uncomment the respective lines and replace the version
+        # using the internal clipboard.
+        {
+            name: copy_selection
+            modifier: control_shift
+            keycode: char_c
+            mode: emacs
+            event: { edit: copyselection }
+            # event: { edit: copyselectionsystem }
+        }
+        {
+            name: cut_selection
+            modifier: control_shift
+            keycode: char_x
+            mode: emacs
+            event: { edit: cutselection }
+            # event: { edit: cutselectionsystem }
+        }
+        # {
+        #     name: paste_system
+        #     modifier: control_shift
+        #     keycode: char_v
+        #     mode: emacs
+        #     event: { edit: pastesystem }
+        # }
+        {
+            name: select_all
+            modifier: control_shift
+            keycode: char_a
+            mode: emacs
+            event: { edit: selectall }
+        }
+    ]
+}
+
+source ~/dotfiles/.config/nushell/theme.nu
+source ~/dotfiles/.config/nushell/carapace.nu
+source ~/dotfiles/.config/nushell/base_completions.nu
+source ~/dotfiles/.config/nushell/plugins/zoxide.nu
+source ~/dotfiles/.config/nushell/plugins/atuin.nu
+source ~/dotfiles/.config/nushell/plugins/starship.nu
+source ~/dotfiles/.config/nushell/plugins/extract.nu
+
+$env.config.hooks.env_change.PWD = (
+    $env.config.hooks.env_change.PWD | append ( source ~/dotfiles/.config/nushell/hooks/direnv/config.nu)
+)
+
+def nvimfi [] {
+    nvim (fd -type file -path "./.git" -prune -o -type f -not -path "*/.*" -print | fzf --preview "bat --color=always {}")
+}
+
+alias cf = cd (fd --type d --hidden --exclude .git --strip-cwd-prefix --max-depth 99 | fzf --reverse --preview "ls --color {}")
+source $"($nu.home-path)/.cargo/env.nu"
diff --git a/.config/nushell/hooks/direnv/config.nu b/.config/nushell/hooks/direnv/config.nu
new file mode 100644
index 00000000..2cb7efc7
--- /dev/null
+++ b/.config/nushell/hooks/direnv/config.nu
@@ -0,0 +1,30 @@
+# you can use the following closure in your config in a few different ways, e.g.
+#
+# ```nushell
+# $env.config.hooks.env_change.PWD = (
+#     $env.config.hooks.env_change.PWD | append (source nu-hooks/nu-hooks/direnv/config.nu)
+# )
+# ```
+#
+# or
+#
+# ```nushell
+# $env.config.hooks.pre_prompt = (
+#     $env.config.hooks.pre_prompt | append (source nu-hooks/nu-hooks/direnv/config.nu)
+# )
+# ```
+#
+# > :bulb: **Note**  
+# > the former will update direnv when you enter and leave a directory whereas the later will update
+# > on every new prompt, i.e. much more often.
+{ ||
+    if (which direnv | is-empty) {
+        return
+    }
+
+    direnv export json | from json | default {} | load-env
+    # Direnv outputs $PATH as a string, but nushell silently breaks if isn't a list-like table.
+    # The following behemoth of Nu code turns this into nu's format while following the standards of how to handle quotes, use it if you need quote handling instead of the line below it:
+    # $env.PATH = $env.PATH | parse --regex ('' + `((?:(?:"(?:(?:\\[\\"])|.)*?")|(?:'.*?')|[^` + (char env_sep) + `]*)*)`) | each {|x| $x.capture0 | parse --regex `(?:"((?:(?:\\"|.))*?)")|(?:'(.*?)')|([^'"]*)` | each {|y| if ($y.capture0 != "") { $y.capture0 | str replace -ar `\\([\\"])` `$1` } else if ($y.capture1 != "") { $y.capture1 } else $y.capture2 } | str join }
+    $env.PATH = $env.PATH | split row (char env_sep)
+}
diff --git a/.config/nushell/hooks/direnv/direnv.nu b/.config/nushell/hooks/direnv/direnv.nu
new file mode 100644
index 00000000..8f927146
--- /dev/null
+++ b/.config/nushell/hooks/direnv/direnv.nu
@@ -0,0 +1,32 @@
+def direnv [] {
+    [
+        {
+            condition: {|before, after| ($before != $after) and ($after | path join .env.yaml | path exists) }
+            code: "
+                open .env.yaml | load-env
+            "
+        }
+        {
+            condition: {|before, after| ($before != $after) and ($after | path join '.env' | path exists) }
+            code: "
+                open .env
+                | lines
+                | parse -r '(?P<k>.+?)=(?P<v>.+)'
+                | reduce -f {} {|x, acc| $acc | upsert $x.k $x.v}
+                | load-env
+            "
+        }
+    ]
+}
+
+export-env {
+    $env.config = ( $env.config | upsert hooks.env_change.PWD { |config|
+        let o = ($config | get -i hooks.env_change.PWD)
+        let val = (direnv)
+        if $o == null {
+            $val
+        } else {
+            $o | append $val
+        }
+    })
+}
diff --git a/.config/nushell/plugins/atuin.nu b/.config/nushell/plugins/atuin.nu
new file mode 100644
index 00000000..1ff417a6
--- /dev/null
+++ b/.config/nushell/plugins/atuin.nu
@@ -0,0 +1,102 @@
+# Source this in your ~/.config/nushell/config.nu
+$env.ATUIN_SESSION = (atuin uuid)
+hide-env -i ATUIN_HISTORY_ID
+
+# Magic token to make sure we don't record commands run by keybindings
+let ATUIN_KEYBINDING_TOKEN = $"# (random uuid)"
+
+let _atuin_pre_execution = {||
+    if ($nu | get -i history-enabled) == false {
+        return
+    }
+    let cmd = (commandline)
+    if ($cmd | is-empty) {
+        return
+    }
+    if not ($cmd | str starts-with $ATUIN_KEYBINDING_TOKEN) {
+        $env.ATUIN_HISTORY_ID = (atuin history start -- $cmd)
+    }
+}
+
+let _atuin_pre_prompt = {||
+    let last_exit = $env.LAST_EXIT_CODE
+    if 'ATUIN_HISTORY_ID' not-in $env {
+        return
+    }
+    with-env { ATUIN_LOG: error } {
+        do { atuin history end $'--exit=($last_exit)' -- $env.ATUIN_HISTORY_ID } | complete
+
+    }
+    hide-env ATUIN_HISTORY_ID
+}
+
+def _atuin_search_cmd [...flags: string] {
+    let nu_version = do {
+        let version = version
+        let major = $version.major?
+        if $major != null {
+            # These members are only available in versions > 0.92.2
+            [$major $version.minor $version.patch]
+        } else {
+            # So fall back to the slower parsing when they're missing
+            $version.version | split row '.' | into int
+        }
+    }
+    [
+        $ATUIN_KEYBINDING_TOKEN,
+        ([
+            `with-env { ATUIN_LOG: error, ATUIN_QUERY: (commandline) } {`,
+                (if $nu_version.0 <= 0 and $nu_version.1 <= 90 { 'commandline' } else { 'commandline edit' }),
+                (if $nu_version.1 >= 92 { '(run-external atuin search' } else { '(run-external --redirect-stderr atuin search' }),
+                    ($flags | append [--interactive] | each {|e| $'"($e)"'}),
+                (if $nu_version.1 >= 92 { ' e>| str trim)' } else {' | complete | $in.stderr | str substring ..-1)'}),
+            `}`,
+        ] | flatten | str join ' '),
+    ] | str join "\n"
+}
+
+$env.config = ($env | default {} config).config
+$env.config = ($env.config | default {} hooks)
+$env.config = (
+    $env.config | upsert hooks (
+        $env.config.hooks
+        | upsert pre_execution (
+            $env.config.hooks | get -i pre_execution | default [] | append $_atuin_pre_execution)
+        | upsert pre_prompt (
+            $env.config.hooks | get -i pre_prompt | default [] | append $_atuin_pre_prompt)
+    )
+)
+
+$env.config = ($env.config | default [] keybindings)
+
+$env.config = (
+    $env.config | upsert keybindings (
+        $env.config.keybindings
+        | append {
+            name: atuin
+            modifier: control
+            keycode: char_r
+            mode: [emacs, vi_normal, vi_insert]
+            event: { send: executehostcommand cmd: (_atuin_search_cmd) }
+        }
+    )
+)
+
+$env.config = (
+    $env.config | upsert keybindings (
+        $env.config.keybindings
+        | append {
+            name: atuin
+            modifier: none
+            keycode: up
+            mode: [emacs, vi_normal, vi_insert]
+            event: {
+                until: [
+                    {send: menuup}
+                    {send: executehostcommand cmd: (_atuin_search_cmd '--shell-up-key-binding') }
+                ]
+            }
+        }
+    )
+)
+
diff --git a/.config/nushell/plugins/extract.nu b/.config/nushell/plugins/extract.nu
new file mode 100644
index 00000000..1fbe1dee
--- /dev/null
+++ b/.config/nushell/plugins/extract.nu
@@ -0,0 +1,26 @@
+# Function to extract archives with different extensions.
+export def extract [name:string] {
+  let handlers = [ [extension command];
+                   ['tar\.bz2|tbz|tbz2' 'tar xvjf']
+                   ['tar\.gz|tgz'       'tar xvzf']
+                   ['tar\.xz|txz'       'tar xvf']
+                   ['tar\.Z'            'tar xvZf']
+                   ['bz2'               'bunzip2']
+                   ['deb'               'ar x']
+                   ['gz'                'gunzip']
+                   ['pkg'               'pkgutil --expand']
+                   ['rar'               'unrar x']
+                   ['tar'               'tar xvf']
+                   ['xz'                'xz --decompress']
+                   ['zip|war|jar|nupkg' 'unzip']
+                   ['Z'                 'uncompress']
+                   ['7z'                '7za x']
+                 ]
+  let maybe_handler = ($handlers | where $name =~ $'\.(($it.extension))$')
+  if ($maybe_handler | is-empty) {
+    error make { msg: "unsupported file extension" }
+  } else {
+    let handler = ($maybe_handler | first)
+    nu -c ($handler.command + ' ' + $name)
+  }
+}
diff --git a/.config/nushell/plugins/starship.nu b/.config/nushell/plugins/starship.nu
new file mode 100644
index 00000000..9837da54
--- /dev/null
+++ b/.config/nushell/plugins/starship.nu
@@ -0,0 +1,38 @@
+# this file is both a valid
+# - overlay which can be loaded with `overlay use starship.nu`
+# - module which can be used with `use starship.nu`
+# - script which can be used with `source starship.nu`
+export-env { $env.STARSHIP_SHELL = "nu"; load-env {
+    STARSHIP_SESSION_KEY: (random chars -l 16)
+    PROMPT_MULTILINE_INDICATOR: (
+        ^/run/current-system/sw/bin/starship prompt --continuation
+    )
+
+    # Does not play well with default character module.
+    # TODO: Also Use starship vi mode indicators?
+    PROMPT_INDICATOR: ""
+
+    PROMPT_COMMAND: {||
+        # jobs are not supported
+        (
+            ^/run/current-system/sw/bin/starship prompt
+                --cmd-duration $env.CMD_DURATION_MS
+                $"--status=($env.LAST_EXIT_CODE)"
+                --terminal-width (term size).columns
+        )
+    }
+
+    config: ($env.config? | default {} | merge {
+        render_right_prompt_on_last_line: true
+    })
+
+    PROMPT_COMMAND_RIGHT: {||
+        (
+            ^/run/current-system/sw/bin/starship prompt
+                --right
+                --cmd-duration $env.CMD_DURATION_MS
+                $"--status=($env.LAST_EXIT_CODE)"
+                --terminal-width (term size).columns
+        )
+    }
+}}
diff --git a/.config/nushell/plugins/zoxide.nu b/.config/nushell/plugins/zoxide.nu
new file mode 100644
index 00000000..07f06ce8
--- /dev/null
+++ b/.config/nushell/plugins/zoxide.nu
@@ -0,0 +1,38 @@
+
+# Initialize hook to add new entries to the database.
+if (not ($env | default false __zoxide_hooked | get __zoxide_hooked)) {
+  $env.__zoxide_hooked = true
+  $env.config = ($env | default {} config).config
+  $env.config = ($env.config | default {} hooks)
+  $env.config = ($env.config | update hooks ($env.config.hooks | default {} env_change))
+  $env.config = ($env.config | update hooks.env_change ($env.config.hooks.env_change | default [] PWD))
+  $env.config = ($env.config | update hooks.env_change.PWD ($env.config.hooks.env_change.PWD | append {|_, dir|
+    zoxide add -- $dir
+  }))
+}
+
+def --env --wrapped __zoxide_z [...rest:string] {
+  let arg0 = ($rest | append '~').0
+  let arg0_is_dir = (try {$arg0 | path expand | path type}) == 'dir'
+  let path = if (($rest | length) <= 1) and ($arg0 == '-' or $arg0_is_dir) {
+    $arg0
+  } else {
+    (zoxide query --exclude $env.PWD -- ...$rest | str trim -r -c "\n")
+  }
+  cd $path
+}
+
+# Jump to a directory using interactive search.
+def --env --wrapped __zoxide_zi [...rest:string] {
+  cd $'(zoxide query --interactive -- ...$rest | str trim -r -c "\n")'
+}
+let zoxide_completer = {|spans|
+    $spans | skip 1 | zoxide query -l ...$in | lines | where {|x| $x != $env.PWD}
+}
+alias cd = __zoxide_z
+alias cdi = __zoxide_zi
+{
+    z => $zoxide_completer
+    zi => $zoxide_completer
+}
+
diff --git a/.config/nushell/theme.nu b/.config/nushell/theme.nu
new file mode 100644
index 00000000..80bc206b
--- /dev/null
+++ b/.config/nushell/theme.nu
@@ -0,0 +1,134 @@
+# Retrieve the theme settings
+export def main [] {
+    return {
+        binary: '#bb9af7'
+        block: '#7aa2f7'
+        cell-path: '#a9b1d6'
+        closure: '#7dcfff'
+        custom: '#c0caf5'
+        duration: '#e0af68'
+        float: '#f7768e'
+        glob: '#c0caf5'
+        int: '#bb9af7'
+        list: '#7dcfff'
+        nothing: '#f7768e'
+        range: '#e0af68'
+        record: '#7dcfff'
+        string: '#9ece6a'
+
+        bool: {|| if $in { '#7dcfff' } else { '#e0af68' } }
+
+        datetime: {|| (date now) - $in |
+            if $in < 1hr {
+                { fg: '#f7768e' attr: 'b' }
+            } else if $in < 6hr {
+                '#f7768e'
+            } else if $in < 1day {
+                '#e0af68'
+            } else if $in < 3day {
+                '#9ece6a'
+            } else if $in < 1wk {
+                { fg: '#9ece6a' attr: 'b' }
+            } else if $in < 6wk {
+                '#7dcfff'
+            } else if $in < 52wk {
+                '#7aa2f7'
+            } else { 'dark_gray' }
+        }
+
+        filesize: {|e|
+            if $e == 0b {
+                '#a9b1d6'
+            } else if $e < 1mb {
+                '#7dcfff'
+            } else {{ fg: '#7aa2f7' }}
+        }
+
+        shape_and: { fg: '#bb9af7' attr: 'b' }
+        shape_binary: { fg: '#bb9af7' attr: 'b' }
+        shape_block: { fg: '#7aa2f7' attr: 'b' }
+        shape_bool: '#7dcfff'
+        shape_closure: { fg: '#7dcfff' attr: 'b' }
+        shape_custom: '#9ece6a'
+        shape_datetime: { fg: '#7dcfff' attr: 'b' }
+        shape_directory: '#7dcfff'
+        shape_external: '#7dcfff'
+        shape_external_resolved: '#7dcfff'
+        shape_externalarg: { fg: '#9ece6a' attr: 'b' }
+        shape_filepath: '#7dcfff'
+        shape_flag: { fg: '#7aa2f7' attr: 'b' }
+        shape_float: { fg: '#f7768e' attr: 'b' }
+        shape_garbage: { fg: '#FFFFFF' bg: '#FF0000' attr: 'b' }
+        shape_glob_interpolation: { fg: '#7dcfff' attr: 'b' }
+        shape_globpattern: { fg: '#7dcfff' attr: 'b' }
+        shape_int: { fg: '#bb9af7' attr: 'b' }
+        shape_internalcall: { fg: '#7dcfff' attr: 'b' }
+        shape_keyword: { fg: '#bb9af7' attr: 'b' }
+        shape_list: { fg: '#7dcfff' attr: 'b' }
+        shape_literal: '#7aa2f7'
+        shape_match_pattern: '#9ece6a'
+        shape_matching_brackets: { attr: 'u' }
+        shape_nothing: '#f7768e'
+        shape_operator: '#e0af68'
+        shape_or: { fg: '#bb9af7' attr: 'b' }
+        shape_pipe: { fg: '#bb9af7' attr: 'b' }
+        shape_range: { fg: '#e0af68' attr: 'b' }
+        shape_raw_string: { fg: '#c0caf5' attr: 'b' }
+        shape_record: { fg: '#7dcfff' attr: 'b' }
+        shape_redirection: { fg: '#bb9af7' attr: 'b' }
+        shape_signature: { fg: '#9ece6a' attr: 'b' }
+        shape_string: '#9ece6a'
+        shape_string_interpolation: { fg: '#7dcfff' attr: 'b' }
+        shape_table: { fg: '#7aa2f7' attr: 'b' }
+        shape_vardecl: { fg: '#7aa2f7' attr: 'u' }
+        shape_variable: '#bb9af7'
+
+        foreground: '#c0caf5'
+        background: '#1a1b26'
+        cursor: '#c0caf5'
+
+        empty: '#7aa2f7'
+        header: { fg: '#9ece6a' attr: 'b' }
+        hints: '#414868'
+        leading_trailing_space_bg: { attr: 'n' }
+        row_index: { fg: '#9ece6a' attr: 'b' }
+        search_result: { fg: '#f7768e' bg: '#a9b1d6' }
+        separator: '#a9b1d6'
+    }
+}
+
+# Update the Nushell configuration
+export def --env "set color_config" [] {
+    $env.config.color_config = (main)
+}
+
+# Update terminal colors
+export def "update terminal" [] {
+    let theme = (main)
+
+    # Set terminal colors
+    let osc_screen_foreground_color = '10;'
+    let osc_screen_background_color = '11;'
+    let osc_cursor_color = '12;'
+        
+    $"
+    (ansi -o $osc_screen_foreground_color)($theme.foreground)(char bel)
+    (ansi -o $osc_screen_background_color)($theme.background)(char bel)
+    (ansi -o $osc_cursor_color)($theme.cursor)(char bel)
+    "
+    # Line breaks above are just for source readability
+    # but create extra whitespace when activating. Collapse
+    # to one line and print with no-newline
+    | str replace --all "\n" ''
+    | print -n $"($in)\r"
+}
+
+export module activate {
+    export-env {
+        set color_config
+        update terminal
+    }
+}
+
+# Activate the theme when sourced
+use activate
diff --git a/.config/nvim b/.config/nvim
index a315d8f1..eeaa4562 160000
--- a/.config/nvim
+++ b/.config/nvim
@@ -1 +1 @@
-Subproject commit a315d8f127230200845d08232530a7effecd9e72
+Subproject commit eeaa4562d4de3f0bdb6c54d786b25294a7e82060
diff --git a/.config/rofi/config.rasi b/.config/rofi/config.rasi
index aa384fb3..be0aad05 100644
--- a/.config/rofi/config.rasi
+++ b/.config/rofi/config.rasi
@@ -151,3 +151,7 @@ configuration {
 }
 
 /* @theme "/usr/share/rofi/themes/gruvbox-dark-hard.rasi" */
+
+//@theme "/home/connerohnesorge/.local/share/rofi/themes/spotlight-dark.rasi"
+
+@theme "/home/connerohnesorge/.config/rofi/themes/spotlight-dark.rasi"
diff --git a/.config/rofi/themes/spotlight-dark.rasi b/.config/rofi/themes/spotlight-dark.rasi
new file mode 100644
index 00000000..a9b9c205
--- /dev/null
+++ b/.config/rofi/themes/spotlight-dark.rasi
@@ -0,0 +1,99 @@
+/* MACOS SPOTLIGHT LIKE DARK THEME FOR ROFI  */
+/* Author: Newman Sanchez (https://github.com/newmanls) */
+
+* {
+    font:   "Montserrat 12";
+
+    bg0:    #242424E6;
+    bg1:    #7E7E7E80;
+    bg2:    #0860f2E6;
+
+    fg0:    #DEDEDE;
+    fg1:    #FFFFFF;
+    fg2:    #DEDEDE80;
+
+    background-color:   transparent;
+    text-color:         @fg0;
+
+    margin:     0;
+    padding:    0;
+    spacing:    0;
+}
+
+window {
+    background-color:   @bg0;
+
+    location:       center;
+    width:          640;
+    border-radius:  8;
+}
+
+inputbar {
+    font:       "Montserrat 20";
+    padding:    12px;
+    spacing:    12px;
+    children:   [ icon-search, entry ];
+}
+
+icon-search {
+    expand:     false;
+    filename:   "search";
+    size: 28px;
+}
+
+icon-search, entry, element-icon, element-text {
+    vertical-align: 0.5;
+}
+
+entry {
+    font:   inherit;
+
+    placeholder         : "Search";
+    placeholder-color   : @fg2;
+}
+
+message {
+    border:             2px 0 0;
+    border-color:       @bg1;
+    background-color:   @bg1;
+}
+
+textbox {
+    padding:    8px 24px;
+}
+
+listview {
+    lines:      10;
+    columns:    1;
+
+    fixed-height:   false;
+    border:         1px 0 0;
+    border-color:   @bg1;
+}
+
+element {
+    padding:            8px 16px;
+    spacing:            16px;
+    background-color:   transparent;
+}
+
+element normal active {
+    text-color: @bg2;
+}
+
+element alternate active {
+    text-color: @bg2;
+}
+
+element selected normal, element selected active {
+    background-color:   @bg2;
+    text-color:         @fg1;
+}
+
+element-icon {
+    size:   1em;
+}
+
+element-text {
+    text-color: inherit;
+}
diff --git a/.config/waybar/config.jsonc b/.config/waybar/config.jsonc
deleted file mode 100644
index 075e93a7..00000000
--- a/.config/waybar/config.jsonc
+++ /dev/null
@@ -1,294 +0,0 @@
-// -*- mode: jsonc -*-
-{
-  "layer": "top",
-  "position": "top",
-  "modules-left": [
-    "clock",
-    "disk",
-    "memory",
-    "cpu",
-    "temperature",
-  ],
-  "modules-center": [
-    "hyprland/workspaces",
-    "mpd"
-  ],
-  "modules-right": [
-    "hyprland/window",
-    "tray",
-    "group/blight",
-    "idle_inhibitor",
-    "bluetooth",
-    "group/audio",
-    "group/networking",
-    "battery"
-  ],
-  "reload_style_on_change": true,
-  "clock": {
-    "format": "{:%I:%M:%S %p}",
-    "interval": 1,
-    "tooltip-format": "\n<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
-    "calendar-weeks-pos": "right",
-    "today-format": "<span color='#7645AD'><b><u>{}</u></b></span>",
-    "format-calendar": "<span color='#aeaeae'><b>{}</b></span>",
-    "format-calendar-weeks": "<span color='#aeaeae'><b>W{:%V}</b></span>",
-    "format-calendar-weekdays": "<span color='#aeaeae'><b>{}</b></span>"
-  },
-  "disk": {
-    "interval": 30,
-    "format": " {percentage_used}%",
-    "path": "/"
-  },
-  "memory": {
-    "format": " {percentage}%"
-  },
-  "cpu": {
-    "interval": 1,
-    "format": " {usage}%",
-    "format-icons": [
-      "▁",
-      "▂",
-      "▃",
-      "▄",
-      "▅",
-      "▆",
-      "▇",
-      "█"
-    ],
-  },
-  "temperature": {
-    "format": " {temperatureC}°C",
-    "format-critical": " {temperatureC}°C",
-    "interval": 1,
-    "critical-threshold": 80,
-    "on-click": "foot btop",
-  },
-  "hyprland/workspaces": {
-    "format": "<span font='18px'>{icon}</span>",
-    "format-icons": {
-      "1": "1",
-      "2": "2",
-      "3": "3",
-      "4": "4",
-      "5": "5",
-      "6": "6",
-      "7": "7",
-      "8": "8",
-      "default": ""
-    },
-    "persistent-workspaces": {
-      "*": [
-        1,
-        2,
-        3,
-        4,
-        5,
-        6,
-        7,
-        8
-      ]
-    }
-  },
-  "hyprland/window": {
-    "format": "( {class} )",
-    "rewrite": {
-      "(.*) - Zen Browser": "🌎 $1",
-      "org.telegram.desktop": "> [$1]",
-      "org.gnome.Nautilus": "> [$1]",
-      "(.*) - zsh": "> [$1]"
-    }
-  },
-  "tray": {
-    "icon-size": 14,
-    "spacing": 10
-  },
-  "group/blight": {
-    "orientation": "horizontal",
-    "drawer": {
-      "transition-duration": 500,
-      "transition-left-to-right": false
-    },
-    "modules": [
-      "backlight",
-      "backlight/slider"
-    ]
-  },
-  "backlight": {
-    "device": "intel_backlight",
-    "format": "<span font='12'>{icon}</span>",
-    "format-icons": [
-      "",
-      "",
-      "",
-      "",
-      "",
-      "",
-      "",
-      "",
-      "",
-      "",
-    ],
-    "on-scroll-down": "light -U 10",
-    "on-scroll-up": "light -A 10",
-    "smooth-scrolling-threshold": 1
-  },
-  "backlight/slider": {
-    "min": 0,
-    "max": 100,
-    "orientation": "horizontal",
-    "device": "intel_backlight"
-  },
-  "idle_inhibitor": {
-    "format": "<span font='12'>{icon}</span>",
-    "format-icons": {
-      "activated": "󰾪",
-      "deactivated": "󰅶"
-    }
-  },
-  "bluetooth": {
-    "format-on": "󰂰",
-    "format-off": "",
-    "format-disabled": "󰂲",
-    "format-connected": "󰂴",
-    "format-connected-battery": "{device_battery_percentage}% 󰂴",
-    "tooltip-format": "{controller_alias}\t{controller_address}\n\n{num_connections} connected",
-    "tooltip-format-connected": "{controller_alias}\t{controller_address}\n\n{num_connections} connected\n\n{device_enumerate}",
-    "tooltip-format-enumerate-connected": "{device_alias}\t{device_address}",
-    "tooltip-format-enumerate-connected-battery": "{device_alias}\t{device_address}\t{device_battery_percentage}%",
-    "on-click": "rofi-bluetooth",
-  },
-  "pulseaudio": {
-    "format": "{icon} {volume}%",
-    "format-bluetooth": "󰂰",
-    "format-muted": "",
-    "tooltip-format": "{volume}% {icon}",
-    "format-icons": {
-      "headphones": "",
-      "bluetooth": "󰥰",
-      "handsfree": "",
-      "headset": "󱡬",
-      "phone": "",
-      "portable": "",
-      "car": "",
-      "default": [
-        "🕨",
-        "🕩",
-        "🕪"
-      ]
-    },
-    "scroll-step": 5,
-    "justify": "center",
-    "on-click": "amixer sset Master toggle",
-    "on-click-right": "pavucontrol",
-    "tooltip-format": "{volume}%  {icon}",
-    "on-scroll-up": "pactl set-sink-volume @DEFAULT_SINK@ +5%",
-    "on-scroll-down": "pactl set-sink-volume @DEFAULT_SINK@ -5%"
-  },
-  "pulseaudio#mic": {
-    "format": "{format_source}",
-    "format-source": "",
-    "format-source-muted": "",
-    "tooltip-format": "{volume}% {format_source} ",
-    "on-click": "pactl set-source-mute 0 toggle",
-    "on-scroll-down": "pactl set-source-volume 0 -1%",
-    "on-scroll-up": "pactl set-source-volume 0 +1%"
-  },
-  "group/audio": {
-    "orientation": "horizontal",
-    "drawer": {
-      "transition-duration": 500,
-      "transition-left-to-right": false
-    },
-    "modules": [
-      "pulseaudio",
-      "pulseaudio#mic",
-      "pulseaudio/slider"
-    ]
-  },
-  "pulseaudio/slider": {
-    "min": 0,
-    "max": 140,
-    "orientation": "horizontal"
-  },
-  "network": {
-    "format-wifi": " ",
-    "format-ethernet": "󰈀",
-    "format-disconnected": "󱐅",
-    "tooltip-format": "{ipaddr}",
-    "tooltip-format-wifi": "{essid} ({signalStrength}%)  | {ipaddr}",
-    "tooltip-format-ethernet": "{ifname} 🖧 | {ipaddr}",
-    "tooltip-format-ethernet": "{bandwidthTotalBytes}",
-    "on-click": "networkmanager_dmenu"
-  },
-  "network#speed": {
-    "format": "{bandwidthDownBits}",
-    "interval": 1,
-    "tooltip-format": "{ipaddr}",
-    "tooltip-format-wifi": "{essid} ({signalStrength}%)   \n{ipaddr} | {frequency} MHz{icon} ",
-    "tooltip-format-ethernet": "{ifname} 󰈀 \n{ipaddr} | {frequency} MHz{icon} ",
-    "tooltip-format-disconnected": "Not Connected to any type of Network",
-    "tooltip": true,
-    "on-click": "pgrep -x rofi &>/dev/null && notify-send rofi || networkmanager_dmenu"
-  },
-  "group/networking": {
-    "orientation": "horizontal",
-    "drawer": {
-      "transition-duration": 500,
-      "transition-left-to-right": false
-    },
-    "modules": [
-      "network",
-      "network#speed"
-    ]
-  },
-  "battery": {
-    "interval": 10,
-    "states": {
-      "good": 95,
-      "warning": 30,
-      "critical": 20
-    },
-    "tooltip": true,
-    "format": "{capacity}% <span font='16px'>{icon}</span>",
-    "format-time": "{H}h {M}min",
-    "tooltip": "{time}",
-    "format-charging": "{capacity}% <span font='16px'>{icon}</span>",
-    "format-plugged": "{capacity}% 󰠠",
-    "format-icons": [
-      "󰪞",
-      "󰪟",
-      "󰪠",
-      "󰪡",
-      "󰪢",
-      "󰪣",
-      "󰪤",
-      "󰪥"
-    ],
-    "on-click": "~/.config/waybar/scripts/powermenu.sh"
-  },
-  "mpd": {
-    "format": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {album} - {title} ({elapsedTime:%M:%S}/{totalTime:%M:%S}) <U+F001>",
-    "format-disconnected": "Disconnected <U+F001>",
-    "format-stopped": "{consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped <U+F001>",
-    "interval": 2,
-    "consume-icons": {
-      "on": "<U+F0C4> " 
-    },
-    "random-icons": {
-      "off": "<span color=\"#f53c3c\"><U+F074></span> ", 
-      "on": "<U+F074> "
-    },
-    "repeat-icons": {
-      "on": "<U+F01E> "
-    },
-    "single-icons": {
-      "on": "<U+F01E>1 "
-    },
-    "state-icons": {
-      "paused": "<U+F04C>",
-      "playing": "<U+F04B>"
-    },
-    "tooltip-format": "MPD (connected)",
-    "tooltip-format-disconnected": "MPD (disconnected)"
-  }
-}
diff --git a/.config/waybar/style.css b/.config/waybar/style.css
deleted file mode 100644
index 8a6b36f9..00000000
--- a/.config/waybar/style.css
+++ /dev/null
@@ -1,127 +0,0 @@
-* {
-  border: none;
-  font-size: 14px;
-  font-family: "JetBrainsMono Nerd Font,JetBrainsMono NF";
-}
-
-window#waybar {
-  background: transparent;
-  margin: 5px;
-}
-
-#custom-logo {
-  padding: 0 10px;
-}
-
-.modules-right {
-  padding-left: 5px;
-  border-radius: 15px 0 0 15px;
-  margin-top: 0px;
-  background: #000000;
-}
-
-.modules-center {
-  padding: 0 0px;
-  margin-top: 0px;
-  border-radius: 15px 15px 15px 15px;
-  background: #000000;
-}
-
-.modules-left {
-  border-radius: 0 15px 15px 0;
-  margin-top: 0px;
-  background: #000000;
-}
-
-#battery,
-#custom-clipboard,
-#custom-colorpicker,
-#custom-powerDraw,
-#bluetooth,
-#pulseaudio,
-#network,
-#disk,
-#memory,
-#backlight,
-#cpu,
-#temperature,
-#custom-weather,
-#idle_inhibitor,
-#jack,
-#tray,
-#window,
-#workspaces,
-#clock {
-  padding: 0 5px;
-}
-#backlight,
-#pulseaudio {
-  padding-left: 10px;
-  padding-right: 10px;
-}
-
-.active {
-  background-color: #5fd1fa;
-  color: #000000;
-}
-
-#pulseaudio {
-  padding-top: 3px;
-}
-
-#temperature.critical,
-#pulseaudio.muted {
-  color: #FF0000;
-  padding-top: 0;
-}
-
-#clock {
-  color: #5fd1fa;
-}
-
-#battery.charging {
-  color: #ffffff;
-  background-color: #26A65B;
-}
-
-#battery.warning:not(.charging) {
-  background-color: #ffbe61;
-  color: black;
-}
-
-#battery.critical:not(.charging) {
-  background-color: #f53c3c;
-  color: #ffffff;
-  animation-name: blink;
-  animation-duration: 0.5s;
-  animation-timing-function: linear;
-  animation-iteration-count: infinite;
-  animation-direction: alternate;
-}
-
-
-@keyframes blink {
-  to {
-    background-color: #ffffff;
-    color: #000000;
-  }
-}
-#tray {
-    background-color: #FA8BFF;
-    background-image: linear-gradient(-45deg, #2BD2FF 0%, #2BD2FF 52%, #2BD2FF 90%);
-    color: black;
-}
-
-#tray > .passive {
-    -gtk-icon-effect: dim;
-    background-color: #FA8BFF;
-    background-image: linear-gradient(-45deg, #FA8BFF 0%, #2BD2FF 52%, #2BD2FF 90%);
-    color: black;
-}
-
-#tray > .needs-attention {
-    -gtk-icon-effect: highlight;
-    background-color: #FA8BFF;
-    background-image: linear-gradient(-45deg, #FA8BFF 0%, #2BD2FF 52%, #2BD2FF 90%);
-    color: black;
-}
diff --git a/.config/wezterm/wezterm.lua b/.config/wezterm/wezterm.lua
new file mode 100644
index 00000000..619c4293
--- /dev/null
+++ b/.config/wezterm/wezterm.lua
@@ -0,0 +1,43 @@
+local wezterm = require 'wezterm'
+local io = require 'io'
+local os = require 'os'
+local act = wezterm.action
+
+wezterm.on('trigger-vim-with-scrollback', function(window, pane)
+	-- Retrieve the text from the pane
+	local text = pane:get_lines_as_text(pane:get_dimensions().scrollback_rows)
+
+	-- Create a temporary file to pass to vim
+	local name = os.tmpname()
+	local f = io.open(name, 'w+')
+	f:write(text)
+	f:flush()
+	f:close()
+
+	-- Open a new window running vim and tell it to open the file
+	window:perform_action(
+		act.SpawnCOmmandInPane {
+			args = { 'nvim', name },
+		},
+		pane
+	)
+
+	-- Wait "enough" time for vim to read the file before we remove it.
+	-- The window creation and process spawn are asynchronous wrt. running
+	-- this script and are not awaitable, so we just pick a number.
+	--
+	-- Note: We don't strictly need to remove this file, but it is nice
+	-- to avoid cluttering up the temporary directory.
+	wezterm.sleep_ms(1000)
+	os.remove(name)
+end)
+
+return {
+	keys = {
+		{
+			key = 'E',
+			mods = 'SHIFT|CTRL',
+			action = act.EmitEvent 'trigger-vim-with-scrollback',
+		},
+	},
+}
diff --git a/.config/yazi/yazi.toml b/.config/yazi/yazi.toml
new file mode 100644
index 00000000..6fabd81e
--- /dev/null
+++ b/.config/yazi/yazi.toml
@@ -0,0 +1,2 @@
+NVIM=1
+NVIM_LOG_FILE=1
diff --git a/.config/zellij/config.kdl b/.config/zellij/config.kdl
index c2cdf4ec..8904d620 100644
--- a/.config/zellij/config.kdl
+++ b/.config/zellij/config.kdl
@@ -1,305 +1,351 @@
-// If you'd like to override the default keybindings completely, be sure to change "keybinds" to "keybinds clear-defaults=true"
-keybinds {
-    normal {
-        // uncomment this and adjust key if using copy_on_select=false
-        // bind "Alt c" { Copy; }
-    }
+//
+// THIS FILE WAS AUTOGENERATED BY ZELLIJ, THE PREVIOUS FILE AT THIS LOCATION WAS COPIED TO: /home/connerohnesorge/.config/zellij/config.kdl.bak
+//
+
+keybinds clear-defaults=true {
     locked {
-        bind "Ctrl g" { SwitchToMode "Normal"; }
-    }
-    resize {
-        bind "Ctrl n" { SwitchToMode "Normal"; }
-        bind "h" "Left" { Resize "Increase Left"; }
-        bind "j" "Down" { Resize "Increase Down"; }
-        bind "k" "Up" { Resize "Increase Up"; }
-        bind "l" "Right" { Resize "Increase Right"; }
-        bind "H" { Resize "Decrease Left"; }
-        bind "J" { Resize "Decrease Down"; }
-        bind "K" { Resize "Decrease Up"; }
-        bind "L" { Resize "Decrease Right"; }
-        bind "=" "+" { Resize "Increase"; }
-        bind "-" { Resize "Decrease"; }
+        bind "Ctrl g" { SwitchToMode "normal"; }
     }
     pane {
-        bind "Ctrl p" { SwitchToMode "Normal"; }
-        bind "h" "Left" { MoveFocus "Left"; }
-        bind "l" "Right" { MoveFocus "Right"; }
-        bind "j" "Down" { MoveFocus "Down"; }
-        bind "k" "Up" { MoveFocus "Up"; }
+        bind "left" { MoveFocus "left"; }
+        bind "down" { MoveFocus "down"; }
+        bind "up" { MoveFocus "up"; }
+        bind "right" { MoveFocus "right"; }
+        bind "c" { SwitchToMode "renamepane"; PaneNameInput 0; }
+        bind "d" { NewPane "down"; SwitchToMode "normal"; }
+        bind "e" { TogglePaneEmbedOrFloating; SwitchToMode "normal"; }
+        bind "f" { ToggleFocusFullscreen; SwitchToMode "normal"; }
+        bind "h" { MoveFocus "left"; }
+        bind "i" { TogglePanePinned; SwitchToMode "normal"; }
+        bind "j" { MoveFocus "down"; }
+        bind "k" { MoveFocus "up"; }
+        bind "l" { MoveFocus "right"; }
+        bind "n" { NewPane; SwitchToMode "normal"; }
         bind "p" { SwitchFocus; }
-        bind "n" { NewPane; SwitchToMode "Normal"; }
-        bind "d" { NewPane "Down"; SwitchToMode "Normal"; }
-        bind "r" { NewPane "Right"; SwitchToMode "Normal"; }
-        bind "x" { CloseFocus; SwitchToMode "Normal"; }
-        bind "f" { ToggleFocusFullscreen; SwitchToMode "Normal"; }
-        bind "z" { TogglePaneFrames; SwitchToMode "Normal"; }
-        bind "w" { ToggleFloatingPanes; SwitchToMode "Normal"; }
-        bind "e" { TogglePaneEmbedOrFloating; SwitchToMode "Normal"; }
-        bind "c" { SwitchToMode "RenamePane"; PaneNameInput 0;}
+        bind "Ctrl p" { SwitchToMode "normal"; }
+        bind "r" { NewPane "right"; SwitchToMode "normal"; }
+        bind "w" { ToggleFloatingPanes; SwitchToMode "normal"; }
+        bind "z" { TogglePaneFrames; SwitchToMode "normal"; }
+    }
+    tab {
+        bind "left" { GoToPreviousTab; }
+        bind "down" { GoToNextTab; }
+        bind "up" { GoToPreviousTab; }
+        bind "right" { GoToNextTab; }
+        bind "1" { GoToTab 1; SwitchToMode "normal"; }
+        bind "2" { GoToTab 2; SwitchToMode "normal"; }
+        bind "3" { GoToTab 3; SwitchToMode "normal"; }
+        bind "4" { GoToTab 4; SwitchToMode "normal"; }
+        bind "5" { GoToTab 5; SwitchToMode "normal"; }
+        bind "6" { GoToTab 6; SwitchToMode "normal"; }
+        bind "7" { GoToTab 7; SwitchToMode "normal"; }
+        bind "8" { GoToTab 8; SwitchToMode "normal"; }
+        bind "9" { GoToTab 9; SwitchToMode "normal"; }
+        bind "[" { BreakPaneLeft; SwitchToMode "normal"; }
+        bind "]" { BreakPaneRight; SwitchToMode "normal"; }
+        bind "b" { BreakPane; SwitchToMode "normal"; }
+        bind "h" { GoToPreviousTab; }
+        bind "j" { GoToNextTab; }
+        bind "k" { GoToPreviousTab; }
+        bind "l" { GoToNextTab; }
+        bind "n" { NewTab; SwitchToMode "normal"; }
+        bind "r" { SwitchToMode "renametab"; TabNameInput 0; }
+        bind "s" { ToggleActiveSyncTab; SwitchToMode "normal"; }
+        bind "Ctrl t" { SwitchToMode "normal"; }
+        bind "x" { CloseTab; SwitchToMode "normal"; }
+        bind "tab" { ToggleTab; }
+    }
+    resize {
+        bind "left" { Resize "Increase left"; }
+        bind "down" { Resize "Increase down"; }
+        bind "up" { Resize "Increase up"; }
+        bind "right" { Resize "Increase right"; }
+        bind "+" { Resize "Increase"; }
+        bind "-" { Resize "Decrease"; }
+        bind "=" { Resize "Increase"; }
+        bind "H" { Resize "Decrease left"; }
+        bind "J" { Resize "Decrease down"; }
+        bind "K" { Resize "Decrease up"; }
+        bind "L" { Resize "Decrease right"; }
+        bind "h" { Resize "Increase left"; }
+        bind "j" { Resize "Increase down"; }
+        bind "k" { Resize "Increase up"; }
+        bind "l" { Resize "Increase right"; }
+        bind "Ctrl n" { SwitchToMode "normal"; }
     }
     move {
-        bind "Ctrl h" { SwitchToMode "Normal"; }
-        bind "n" "Tab" { MovePane; }
+        bind "left" { MovePane "left"; }
+        bind "down" { MovePane "down"; }
+        bind "up" { MovePane "up"; }
+        bind "right" { MovePane "right"; }
+        bind "h" { MovePane "left"; }
+        bind "Ctrl h" { SwitchToMode "normal"; }
+        bind "j" { MovePane "down"; }
+        bind "k" { MovePane "up"; }
+        bind "l" { MovePane "right"; }
+        bind "n" { MovePane; }
         bind "p" { MovePaneBackwards; }
-        bind "h" "Left" { MovePane "Left"; }
-        bind "j" "Down" { MovePane "Down"; }
-        bind "k" "Up" { MovePane "Up"; }
-        bind "l" "Right" { MovePane "Right"; }
-    }
-    tab {
-        bind "Ctrl t" { SwitchToMode "Normal"; }
-        bind "r" { SwitchToMode "RenameTab"; TabNameInput 0; }
-        bind "h" "Left" "Up" "k" { GoToPreviousTab; }
-        bind "l" "Right" "Down" "j" { GoToNextTab; }
-        bind "n" { NewTab; SwitchToMode "Normal"; }
-        bind "x" { CloseTab; SwitchToMode "Normal"; }
-        bind "s" { ToggleActiveSyncTab; SwitchToMode "Normal"; }
-        bind "b" { BreakPane; SwitchToMode "Normal"; }
-        bind "]" { BreakPaneRight; SwitchToMode "Normal"; }
-        bind "[" { BreakPaneLeft; SwitchToMode "Normal"; }
-        bind "1" { GoToTab 1; SwitchToMode "Normal"; }
-        bind "2" { GoToTab 2; SwitchToMode "Normal"; }
-        bind "3" { GoToTab 3; SwitchToMode "Normal"; }
-        bind "4" { GoToTab 4; SwitchToMode "Normal"; }
-        bind "5" { GoToTab 5; SwitchToMode "Normal"; }
-        bind "6" { GoToTab 6; SwitchToMode "Normal"; }
-        bind "7" { GoToTab 7; SwitchToMode "Normal"; }
-        bind "8" { GoToTab 8; SwitchToMode "Normal"; }
-        bind "9" { GoToTab 9; SwitchToMode "Normal"; }
-        bind "Tab" { ToggleTab; }
+        bind "tab" { MovePane; }
     }
     scroll {
-        bind "Ctrl s" { SwitchToMode "Normal"; }
-        bind "e" { EditScrollback; SwitchToMode "Normal"; }
-        bind "s" { SwitchToMode "EnterSearch"; SearchInput 0; }
-        bind "Ctrl c" { ScrollToBottom; SwitchToMode "Normal"; }
-        bind "j" "Down" { ScrollDown; }
-        bind "k" "Up" { ScrollUp; }
-        bind "Ctrl f" "PageDown" "Right" "l" { PageScrollDown; }
-        bind "Ctrl b" "PageUp" "Left" "h" { PageScrollUp; }
-        bind "d" { HalfPageScrollDown; }
-        bind "u" { HalfPageScrollUp; }
-        // uncomment this and adjust key if using copy_on_select=false
-        // bind "Alt c" { Copy; }
+        bind "e" { EditScrollback; SwitchToMode "normal"; }
+        bind "s" { SwitchToMode "entersearch"; SearchInput 0; }
     }
     search {
-        bind "Ctrl s" { SwitchToMode "Normal"; }
-        bind "Ctrl c" { ScrollToBottom; SwitchToMode "Normal"; }
-        bind "j" "Down" { ScrollDown; }
-        bind "k" "Up" { ScrollUp; }
-        bind "Ctrl f" "PageDown" "Right" "l" { PageScrollDown; }
-        bind "Ctrl b" "PageUp" "Left" "h" { PageScrollUp; }
-        bind "d" { HalfPageScrollDown; }
-        bind "u" { HalfPageScrollUp; }
+        bind "c" { SearchToggleOption "CaseSensitivity"; }
         bind "n" { Search "down"; }
+        bind "o" { SearchToggleOption "WholeWord"; }
         bind "p" { Search "up"; }
-        bind "c" { SearchToggleOption "CaseSensitivity"; }
         bind "w" { SearchToggleOption "Wrap"; }
-        bind "o" { SearchToggleOption "WholeWord"; }
-    }
-    entersearch {
-        bind "Ctrl c" "Esc" { SwitchToMode "Scroll"; }
-        bind "Enter" { SwitchToMode "Search"; }
-    }
-    renametab {
-        bind "Ctrl c" { SwitchToMode "Normal"; }
-        bind "Esc" { UndoRenameTab; SwitchToMode "Tab"; }
-    }
-    renamepane {
-        bind "Ctrl c" { SwitchToMode "Normal"; }
-        bind "Esc" { UndoRenamePane; SwitchToMode "Pane"; }
     }
     session {
-        bind "Ctrl o" { SwitchToMode "Normal"; }
-        bind "Ctrl s" { SwitchToMode "Scroll"; }
-        bind "d" { Detach; }
+        bind "a" {
+            LaunchOrFocusPlugin "zellij:about" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "c" {
+            LaunchOrFocusPlugin "configuration" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "Ctrl o" { SwitchToMode "normal"; }
+        bind "p" {
+            LaunchOrFocusPlugin "plugin-manager" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
         bind "w" {
             LaunchOrFocusPlugin "zellij:session-manager" {
                 floating true
                 move_to_focused_tab true
-            };
-            SwitchToMode "Normal"
+            }
+            SwitchToMode "normal"
         }
     }
-    tmux {
-        bind "[" { SwitchToMode "Scroll"; }
-        bind "Ctrl b" { Write 2; SwitchToMode "Normal"; }
-        bind "\"" { NewPane "Down"; SwitchToMode "Normal"; }
-        bind "%" { NewPane "Right"; SwitchToMode "Normal"; }
-        bind "z" { ToggleFocusFullscreen; SwitchToMode "Normal"; }
-        bind "c" { NewTab; SwitchToMode "Normal"; }
-        bind "," { SwitchToMode "RenameTab"; }
-        bind "p" { GoToPreviousTab; SwitchToMode "Normal"; }
-        bind "n" { GoToNextTab; SwitchToMode "Normal"; }
-        bind "Left" { MoveFocus "Left"; SwitchToMode "Normal"; }
-        bind "Right" { MoveFocus "Right"; SwitchToMode "Normal"; }
-        bind "Down" { MoveFocus "Down"; SwitchToMode "Normal"; }
-        bind "Up" { MoveFocus "Up"; SwitchToMode "Normal"; }
-        bind "h" { MoveFocus "Left"; SwitchToMode "Normal"; }
-        bind "l" { MoveFocus "Right"; SwitchToMode "Normal"; }
-        bind "j" { MoveFocus "Down"; SwitchToMode "Normal"; }
-        bind "k" { MoveFocus "Up"; SwitchToMode "Normal"; }
-        bind "o" { FocusNextPane; }
-        bind "d" { Detach; }
-        bind "Space" { NextSwapLayout; }
-        bind "x" { CloseFocus; SwitchToMode "Normal"; }
-    }
     shared_except "locked" {
-        bind "Ctrl g" { SwitchToMode "Locked"; }
-        bind "Ctrl q" { Quit; }
-        bind "Alt n" { NewPane; }
-        bind "Alt h" "Alt Left" { MoveFocusOrTab "Left"; }
-        bind "Alt l" "Alt Right" { MoveFocusOrTab "Right"; }
-        bind "Alt j" "Alt Down" { MoveFocus "Down"; }
-        bind "Alt k" "Alt Up" { MoveFocus "Up"; }
-        bind "Alt =" "Alt +" { Resize "Increase"; }
+        bind "Alt left" { MoveFocusOrTab "left"; }
+        bind "Alt down" { MoveFocus "down"; }
+        bind "Alt up" { MoveFocus "up"; }
+        bind "Alt right" { MoveFocusOrTab "right"; }
+        bind "Alt +" { Resize "Increase"; }
         bind "Alt -" { Resize "Decrease"; }
+        bind "Alt =" { Resize "Increase"; }
         bind "Alt [" { PreviousSwapLayout; }
         bind "Alt ]" { NextSwapLayout; }
+        bind "Alt f" { ToggleFloatingPanes; }
+        bind "Ctrl g" { SwitchToMode "locked"; }
+        bind "Alt h" { MoveFocusOrTab "left"; }
+        bind "Alt i" { MoveTab "left"; }
+        bind "Alt j" { MoveFocus "down"; }
+        bind "Alt k" { MoveFocus "up"; }
+        bind "Alt l" { MoveFocusOrTab "right"; }
+        bind "Alt n" { NewPane; }
+        bind "Alt o" { MoveTab "right"; }
+        bind "Ctrl q" { Quit; }
+    }
+    shared_except "locked" "move" {
+        bind "Ctrl h" { SwitchToMode "move"; }
+    }
+    shared_except "locked" "session" {
+        bind "Ctrl o" { SwitchToMode "session"; }
     }
-    shared_except "normal" "locked" {
-        bind "Enter" "Esc" { SwitchToMode "Normal"; }
+    shared_except "locked" "scroll" "search" "tmux" {
+        bind "Ctrl b" { SwitchToMode "tmux"; }
     }
-    shared_except "pane" "locked" {
-        bind "Ctrl p" { SwitchToMode "Pane"; }
+    shared_except "locked" "scroll" "search" {
+        bind "Ctrl s" { SwitchToMode "scroll"; }
     }
-    shared_except "resize" "locked" {
-        bind "Ctrl n" { SwitchToMode "Resize"; }
+    shared_except "locked" "tab" {
+        bind "Ctrl t" { SwitchToMode "tab"; }
     }
-    shared_except "scroll" "locked" {
-        bind "Ctrl s" { SwitchToMode "Scroll"; }
+    shared_except "locked" "pane" {
+        bind "Ctrl p" { SwitchToMode "pane"; }
     }
-    shared_except "session" "locked" {
-        bind "Ctrl o" { SwitchToMode "Session"; }
+    shared_except "locked" "resize" {
+        bind "Ctrl n" { SwitchToMode "resize"; }
     }
-    shared_except "tab" "locked" {
-        bind "Ctrl t" { SwitchToMode "Tab"; }
+    shared_except "normal" "locked" "entersearch" {
+        bind "enter" { SwitchToMode "normal"; }
     }
-    shared_except "move" "locked" {
-        bind "Ctrl h" { SwitchToMode "Move"; }
+    shared_except "normal" "locked" "entersearch" "renametab" "renamepane" {
+        bind "esc" { SwitchToMode "normal"; }
     }
-    shared_except "tmux" "locked" {
-        bind "Ctrl b" { SwitchToMode "Tmux"; }
+    shared_among "pane" "tmux" {
+        bind "x" { CloseFocus; SwitchToMode "normal"; }
+    }
+    shared_among "scroll" "search" {
+        bind "PageDown" { PageScrollDown; }
+        bind "PageUp" { PageScrollUp; }
+        bind "left" { PageScrollUp; }
+        bind "down" { ScrollDown; }
+        bind "up" { ScrollUp; }
+        bind "right" { PageScrollDown; }
+        bind "Ctrl b" { PageScrollUp; }
+        bind "Ctrl c" { ScrollToBottom; SwitchToMode "normal"; }
+        bind "d" { HalfPageScrollDown; }
+        bind "Ctrl f" { PageScrollDown; }
+        bind "h" { PageScrollUp; }
+        bind "j" { ScrollDown; }
+        bind "k" { ScrollUp; }
+        bind "l" { PageScrollDown; }
+        bind "Ctrl s" { SwitchToMode "normal"; }
+        bind "u" { HalfPageScrollUp; }
+    }
+    entersearch {
+        bind "Ctrl c" { SwitchToMode "scroll"; }
+        bind "esc" { SwitchToMode "scroll"; }
+        bind "enter" { SwitchToMode "search"; }
+    }
+    renametab {
+        bind "esc" { UndoRenameTab; SwitchToMode "tab"; }
+    }
+    shared_among "renametab" "renamepane" {
+        bind "Ctrl c" { SwitchToMode "normal"; }
+    }
+    renamepane {
+        bind "esc" { UndoRenamePane; SwitchToMode "pane"; }
+    }
+    shared_among "session" "tmux" {
+        bind "d" { Detach; }
+    }
+    tmux {
+        bind "left" { MoveFocus "left"; SwitchToMode "normal"; }
+        bind "down" { MoveFocus "down"; SwitchToMode "normal"; }
+        bind "up" { MoveFocus "up"; SwitchToMode "normal"; }
+        bind "right" { MoveFocus "right"; SwitchToMode "normal"; }
+        bind "space" { NextSwapLayout; }
+        bind "\"" { NewPane "down"; SwitchToMode "normal"; }
+        bind "%" { NewPane "right"; SwitchToMode "normal"; }
+        bind "," { SwitchToMode "renametab"; }
+        bind "[" { SwitchToMode "scroll"; }
+        bind "Ctrl b" { Write 2; SwitchToMode "normal"; }
+        bind "c" { NewTab; SwitchToMode "normal"; }
+        bind "h" { MoveFocus "left"; SwitchToMode "normal"; }
+        bind "j" { MoveFocus "down"; SwitchToMode "normal"; }
+        bind "k" { MoveFocus "up"; SwitchToMode "normal"; }
+        bind "l" { MoveFocus "right"; SwitchToMode "normal"; }
+        bind "n" { GoToNextTab; SwitchToMode "normal"; }
+        bind "o" { FocusNextPane; }
+        bind "p" { GoToPreviousTab; SwitchToMode "normal"; }
+        bind "z" { ToggleFocusFullscreen; SwitchToMode "normal"; }
     }
 }
 
+// Plugin aliases - can be used to change the implementation of Zellij
+// changing these requires a restart to take effect
 plugins {
-    tab-bar { path "tab-bar"; }
-    status-bar { path "status-bar"; }
-    strider { path "strider"; }
-    compact-bar { path "compact-bar"; }
-    session-manager { path "session-manager"; }
+    about location="zellij:about"
+    compact-bar location="zellij:compact-bar"
+    configuration location="zellij:configuration"
+    filepicker location="zellij:strider" {
+        cwd "/"
+    }
+    plugin-manager location="zellij:plugin-manager"
+    session-manager location="zellij:session-manager"
+    status-bar location="zellij:status-bar"
+    strider location="zellij:strider"
+    tab-bar location="zellij:tab-bar"
+    welcome-screen location="zellij:session-manager" {
+        welcome_screen true
+    }
 }
 
-// Choose what to do when zellij receives SIGTERM, SIGINT, SIGQUIT or SIGHUP
-// eg. when terminal window with an active zellij session is closed
+// Plugins to load in the background when a new session starts
+// eg. "file:/path/to/my-plugin.wasm"
+// eg. "https://example.com/my-plugin.wasm"
+load_plugins {
+}
+ 
+// Use a simplified UI without special fonts (arrow glyphs)
 // Options:
-//   - detach (Default)
-//   - quit
-//
-// on_force_close "quit"
-
-//  Send a request for a simplified ui (without arrow fonts) to plugins
-//  Options:
-//    - true
-//    - false (Default)
-//
+//   - true
+//   - false (Default)
+// 
 // simplified_ui true
-
+ 
+// Choose the theme that is specified in the themes section.
+// Default: default
+// 
+theme "tokyonight"
+ 
+// Choose the base input mode of zellij.
+// Default: normal
+// 
+// default_mode "locked"
+ 
 // Choose the path to the default shell that zellij will use for opening new panes
 // Default: $SHELL
-//
+// 
 default_shell "zsh"
-
+ 
 // Choose the path to override cwd that zellij will use for opening new panes
-//
-// default_cwd ""
-
-// Toggle between having pane frames around the panes
-// Options:
-//   - true (default)
-//   - false
-//
-pane_frames false
-
-// Toggle between having Zellij lay out panes according to a predefined set of layouts whenever possible
-// Options:
-//   - true (default)
-//   - false
-//
-// auto_layout true
-
-// Whether sessions should be serialized to the cache folder (including their tabs/panes, cwds and running commands) so that they can later be resurrected
-// Options:
-//   - true (default)
-//   - false
-//
-// session_serialization false
-
-// Whether pane viewports are serialized along with the session, default is false
-// Options:
-//   - true
-//   - false (default)
-// serialize_pane_viewport true
-
-// Scrollback lines to serialize along with the pane viewport when serializing sessions, 0
-// defaults to the scrollback size. If this number is higher than the scrollback size, it will
-// also default to the scrollback size. This does nothing if `serialize_pane_viewport` is not true.
-//
-// scrollback_lines_to_serialize 10000
-
-// Define color themes for Zellij
-// For more examples, see: https://github.com/zellij-org/zellij/tree/main/example/themes
-// Once these themes are defined, one of them should to be selected in the "theme" section of this file
-//
- themes {
-     dracula {
-         fg 248 248 242
-         bg 40 42 54
-         red 255 85 85
-         green 80 250 123
-         yellow 241 250 140
-         blue 98 114 164
-         magenta 255 121 198
-         orange 255 184 108
-         cyan 139 233 253
-         black 0 0 0
-         white 255 255 255
-     }
- }
-
-// Choose the theme that is specified in the themes section.
-// Default: default
-//
-theme "tokyonight"
-
+// 
+// default_cwd "/tmp"
+ 
 // The name of the default layout to load on startup
 // Default: "default"
-//
+// 
 // default_layout "compact"
-
-// Choose the mode that zellij uses when starting up.
-// Default: normal
-//
-// default_mode "locked"
-
+ 
+// The folder in which Zellij will look for layouts
+// (Requires restart)
+// 
+layout_dir "~/.config/zellij/layouts/"
+ 
+// The folder in which Zellij will look for themes
+// (Requires restart)
+// 
+// theme_dir "/tmp"
+ 
 // Toggle enabling the mouse mode.
 // On certain configurations, or terminals this could
 // potentially interfere with copying text.
 // Options:
 //   - true (default)
 //   - false
-//
+// 
 // mouse_mode false
-
+ 
+// Toggle having pane frames around the panes
+// Options:
+//   - true (default, enabled)
+//   - false
+// 
+pane_frames false
+ 
+// When attaching to an existing session with other users,
+// should the session be mirrored (true)
+// or should each user have their own cursor (false)
+// (Requires restart)
+// Default: false
+// 
+// mirror_session true
+ 
+// Choose what to do when zellij receives SIGTERM, SIGINT, SIGQUIT or SIGHUP
+// eg. when terminal window with an active zellij session is closed
+// (Requires restart)
+// Options:
+//   - detach (Default)
+//   - quit
+// 
+// on_force_close "quit"
+ 
 // Configure the scroll back buffer size
 // This is the number of lines zellij stores for each pane in the scroll back
 // buffer. Excess number of lines are discarded in a FIFO fashion.
+// (Requires restart)
 // Valid values: positive integers
 // Default value: 10000
-//
-// scroll_buffer_size 10000
-
+// 
+scroll_buffer_size 1000000
+ 
 // Provide a command to execute when copying text. The text will be piped to
 // the stdin of the program to perform the copy. This can be used with
 // terminal emulators which do not support the OSC 52 ANSI control sequence
@@ -309,43 +355,102 @@ theme "tokyonight"
 // copy_command "xclip -selection clipboard" // x11
 // copy_command "wl-copy"                    // wayland
 // copy_command "pbcopy"                     // osx
-
+// 
+// copy_command "pbcopy"
+ 
 // Choose the destination for copied text
 // Allows using the primary selection buffer (on x11/wayland) instead of the system clipboard.
 // Does not apply when using copy_command.
 // Options:
 //   - system (default)
 //   - primary
-//
+// 
 // copy_clipboard "primary"
-
-// Enable or disable automatic copy (and clear) of selection when releasing mouse
+ 
+// Enable automatic copying (and clearing) of selection when releasing mouse
 // Default: true
-//
-// copy_on_select false
-
+// 
+// copy_on_select true
+ 
 // Path to the default editor to use to edit pane scrollbuffer
 // Default: $EDITOR or $VISUAL
-//
 scrollback_editor "nvim"
-
-// When attaching to an existing session with other users,
-// should the session be mirrored (true)
-// or should each user have their own cursor (false)
+ 
+// A fixed name to always give the Zellij session.
+// Consider also setting `attach_to_session true,`
+// otherwise this will error if such a session exists.
+// Default: <RANDOM>
+// 
+// session_name "My singleton session"
+ 
+// When `session_name` is provided, attaches to that session
+// if it is already running or creates it otherwise.
 // Default: false
-//
-// mirror_session true
-
-// The folder in which Zellij will look for layouts
-//
-layout_dir "~/.config/zellij/layouts/"
-
-// The folder in which Zellij will look for themes
-//
-// theme_dir "/path/to/my/theme_dir"
-
+// 
+// attach_to_session true
+ 
+// Toggle between having Zellij lay out panes according to a predefined set of layouts whenever possible
+// Options:
+//   - true (default)
+//   - false
+// 
+// auto_layout false
+ 
+// Whether sessions should be serialized to the cache folder (including their tabs/panes, cwds and running commands) so that they can later be resurrected
+// Options:
+//   - true (default)
+//   - false
+// 
+// session_serialization false
+ 
+// Whether pane viewports are serialized along with the session, default is false
+// Options:
+//   - true
+//   - false (default)
+// 
+// serialize_pane_viewport false
+ 
+// Scrollback lines to serialize along with the pane viewport when serializing sessions, 0
+// defaults to the scrollback size. If this number is higher than the scrollback size, it will
+// also default to the scrollback size. This does nothing if `serialize_pane_viewport` is not true.
+// 
+// scrollback_lines_to_serialize 10000
+ 
 // Enable or disable the rendering of styled and colored underlines (undercurl).
 // May need to be disabled for certain unsupported terminals
+// (Requires restart)
 // Default: true
-//
+// 
 // styled_underlines false
+ 
+// How often in seconds sessions are serialized
+// 
+// serialization_interval 10000
+ 
+// Enable or disable writing of session metadata to disk (if disabled, other sessions might not know
+// metadata info on this session)
+// (Requires restart)
+// Default: false
+// 
+// disable_session_metadata false
+ 
+// Enable or disable support for the enhanced Kitty Keyboard Protocol (the host terminal must also support it)
+// (Requires restart)
+// Default: true (if the host terminal supports it)
+// 
+// support_kitty_keyboard_protocol false
+ 
+// Whether to stack panes when resizing beyond a certain size
+// Default: true
+// 
+// stacked_resize false
+ 
+// Whether to show tips on startup
+// Default: true
+// 
+show_startup_tips false
+ 
+// Whether to show release notes on first version run
+// Default: true
+// 
+// show_release_notes false
diff --git a/.config/zellij/config.kdl.bak b/.config/zellij/config.kdl.bak
new file mode 100644
index 00000000..c2cdf4ec
--- /dev/null
+++ b/.config/zellij/config.kdl.bak
@@ -0,0 +1,351 @@
+// If you'd like to override the default keybindings completely, be sure to change "keybinds" to "keybinds clear-defaults=true"
+keybinds {
+    normal {
+        // uncomment this and adjust key if using copy_on_select=false
+        // bind "Alt c" { Copy; }
+    }
+    locked {
+        bind "Ctrl g" { SwitchToMode "Normal"; }
+    }
+    resize {
+        bind "Ctrl n" { SwitchToMode "Normal"; }
+        bind "h" "Left" { Resize "Increase Left"; }
+        bind "j" "Down" { Resize "Increase Down"; }
+        bind "k" "Up" { Resize "Increase Up"; }
+        bind "l" "Right" { Resize "Increase Right"; }
+        bind "H" { Resize "Decrease Left"; }
+        bind "J" { Resize "Decrease Down"; }
+        bind "K" { Resize "Decrease Up"; }
+        bind "L" { Resize "Decrease Right"; }
+        bind "=" "+" { Resize "Increase"; }
+        bind "-" { Resize "Decrease"; }
+    }
+    pane {
+        bind "Ctrl p" { SwitchToMode "Normal"; }
+        bind "h" "Left" { MoveFocus "Left"; }
+        bind "l" "Right" { MoveFocus "Right"; }
+        bind "j" "Down" { MoveFocus "Down"; }
+        bind "k" "Up" { MoveFocus "Up"; }
+        bind "p" { SwitchFocus; }
+        bind "n" { NewPane; SwitchToMode "Normal"; }
+        bind "d" { NewPane "Down"; SwitchToMode "Normal"; }
+        bind "r" { NewPane "Right"; SwitchToMode "Normal"; }
+        bind "x" { CloseFocus; SwitchToMode "Normal"; }
+        bind "f" { ToggleFocusFullscreen; SwitchToMode "Normal"; }
+        bind "z" { TogglePaneFrames; SwitchToMode "Normal"; }
+        bind "w" { ToggleFloatingPanes; SwitchToMode "Normal"; }
+        bind "e" { TogglePaneEmbedOrFloating; SwitchToMode "Normal"; }
+        bind "c" { SwitchToMode "RenamePane"; PaneNameInput 0;}
+    }
+    move {
+        bind "Ctrl h" { SwitchToMode "Normal"; }
+        bind "n" "Tab" { MovePane; }
+        bind "p" { MovePaneBackwards; }
+        bind "h" "Left" { MovePane "Left"; }
+        bind "j" "Down" { MovePane "Down"; }
+        bind "k" "Up" { MovePane "Up"; }
+        bind "l" "Right" { MovePane "Right"; }
+    }
+    tab {
+        bind "Ctrl t" { SwitchToMode "Normal"; }
+        bind "r" { SwitchToMode "RenameTab"; TabNameInput 0; }
+        bind "h" "Left" "Up" "k" { GoToPreviousTab; }
+        bind "l" "Right" "Down" "j" { GoToNextTab; }
+        bind "n" { NewTab; SwitchToMode "Normal"; }
+        bind "x" { CloseTab; SwitchToMode "Normal"; }
+        bind "s" { ToggleActiveSyncTab; SwitchToMode "Normal"; }
+        bind "b" { BreakPane; SwitchToMode "Normal"; }
+        bind "]" { BreakPaneRight; SwitchToMode "Normal"; }
+        bind "[" { BreakPaneLeft; SwitchToMode "Normal"; }
+        bind "1" { GoToTab 1; SwitchToMode "Normal"; }
+        bind "2" { GoToTab 2; SwitchToMode "Normal"; }
+        bind "3" { GoToTab 3; SwitchToMode "Normal"; }
+        bind "4" { GoToTab 4; SwitchToMode "Normal"; }
+        bind "5" { GoToTab 5; SwitchToMode "Normal"; }
+        bind "6" { GoToTab 6; SwitchToMode "Normal"; }
+        bind "7" { GoToTab 7; SwitchToMode "Normal"; }
+        bind "8" { GoToTab 8; SwitchToMode "Normal"; }
+        bind "9" { GoToTab 9; SwitchToMode "Normal"; }
+        bind "Tab" { ToggleTab; }
+    }
+    scroll {
+        bind "Ctrl s" { SwitchToMode "Normal"; }
+        bind "e" { EditScrollback; SwitchToMode "Normal"; }
+        bind "s" { SwitchToMode "EnterSearch"; SearchInput 0; }
+        bind "Ctrl c" { ScrollToBottom; SwitchToMode "Normal"; }
+        bind "j" "Down" { ScrollDown; }
+        bind "k" "Up" { ScrollUp; }
+        bind "Ctrl f" "PageDown" "Right" "l" { PageScrollDown; }
+        bind "Ctrl b" "PageUp" "Left" "h" { PageScrollUp; }
+        bind "d" { HalfPageScrollDown; }
+        bind "u" { HalfPageScrollUp; }
+        // uncomment this and adjust key if using copy_on_select=false
+        // bind "Alt c" { Copy; }
+    }
+    search {
+        bind "Ctrl s" { SwitchToMode "Normal"; }
+        bind "Ctrl c" { ScrollToBottom; SwitchToMode "Normal"; }
+        bind "j" "Down" { ScrollDown; }
+        bind "k" "Up" { ScrollUp; }
+        bind "Ctrl f" "PageDown" "Right" "l" { PageScrollDown; }
+        bind "Ctrl b" "PageUp" "Left" "h" { PageScrollUp; }
+        bind "d" { HalfPageScrollDown; }
+        bind "u" { HalfPageScrollUp; }
+        bind "n" { Search "down"; }
+        bind "p" { Search "up"; }
+        bind "c" { SearchToggleOption "CaseSensitivity"; }
+        bind "w" { SearchToggleOption "Wrap"; }
+        bind "o" { SearchToggleOption "WholeWord"; }
+    }
+    entersearch {
+        bind "Ctrl c" "Esc" { SwitchToMode "Scroll"; }
+        bind "Enter" { SwitchToMode "Search"; }
+    }
+    renametab {
+        bind "Ctrl c" { SwitchToMode "Normal"; }
+        bind "Esc" { UndoRenameTab; SwitchToMode "Tab"; }
+    }
+    renamepane {
+        bind "Ctrl c" { SwitchToMode "Normal"; }
+        bind "Esc" { UndoRenamePane; SwitchToMode "Pane"; }
+    }
+    session {
+        bind "Ctrl o" { SwitchToMode "Normal"; }
+        bind "Ctrl s" { SwitchToMode "Scroll"; }
+        bind "d" { Detach; }
+        bind "w" {
+            LaunchOrFocusPlugin "zellij:session-manager" {
+                floating true
+                move_to_focused_tab true
+            };
+            SwitchToMode "Normal"
+        }
+    }
+    tmux {
+        bind "[" { SwitchToMode "Scroll"; }
+        bind "Ctrl b" { Write 2; SwitchToMode "Normal"; }
+        bind "\"" { NewPane "Down"; SwitchToMode "Normal"; }
+        bind "%" { NewPane "Right"; SwitchToMode "Normal"; }
+        bind "z" { ToggleFocusFullscreen; SwitchToMode "Normal"; }
+        bind "c" { NewTab; SwitchToMode "Normal"; }
+        bind "," { SwitchToMode "RenameTab"; }
+        bind "p" { GoToPreviousTab; SwitchToMode "Normal"; }
+        bind "n" { GoToNextTab; SwitchToMode "Normal"; }
+        bind "Left" { MoveFocus "Left"; SwitchToMode "Normal"; }
+        bind "Right" { MoveFocus "Right"; SwitchToMode "Normal"; }
+        bind "Down" { MoveFocus "Down"; SwitchToMode "Normal"; }
+        bind "Up" { MoveFocus "Up"; SwitchToMode "Normal"; }
+        bind "h" { MoveFocus "Left"; SwitchToMode "Normal"; }
+        bind "l" { MoveFocus "Right"; SwitchToMode "Normal"; }
+        bind "j" { MoveFocus "Down"; SwitchToMode "Normal"; }
+        bind "k" { MoveFocus "Up"; SwitchToMode "Normal"; }
+        bind "o" { FocusNextPane; }
+        bind "d" { Detach; }
+        bind "Space" { NextSwapLayout; }
+        bind "x" { CloseFocus; SwitchToMode "Normal"; }
+    }
+    shared_except "locked" {
+        bind "Ctrl g" { SwitchToMode "Locked"; }
+        bind "Ctrl q" { Quit; }
+        bind "Alt n" { NewPane; }
+        bind "Alt h" "Alt Left" { MoveFocusOrTab "Left"; }
+        bind "Alt l" "Alt Right" { MoveFocusOrTab "Right"; }
+        bind "Alt j" "Alt Down" { MoveFocus "Down"; }
+        bind "Alt k" "Alt Up" { MoveFocus "Up"; }
+        bind "Alt =" "Alt +" { Resize "Increase"; }
+        bind "Alt -" { Resize "Decrease"; }
+        bind "Alt [" { PreviousSwapLayout; }
+        bind "Alt ]" { NextSwapLayout; }
+    }
+    shared_except "normal" "locked" {
+        bind "Enter" "Esc" { SwitchToMode "Normal"; }
+    }
+    shared_except "pane" "locked" {
+        bind "Ctrl p" { SwitchToMode "Pane"; }
+    }
+    shared_except "resize" "locked" {
+        bind "Ctrl n" { SwitchToMode "Resize"; }
+    }
+    shared_except "scroll" "locked" {
+        bind "Ctrl s" { SwitchToMode "Scroll"; }
+    }
+    shared_except "session" "locked" {
+        bind "Ctrl o" { SwitchToMode "Session"; }
+    }
+    shared_except "tab" "locked" {
+        bind "Ctrl t" { SwitchToMode "Tab"; }
+    }
+    shared_except "move" "locked" {
+        bind "Ctrl h" { SwitchToMode "Move"; }
+    }
+    shared_except "tmux" "locked" {
+        bind "Ctrl b" { SwitchToMode "Tmux"; }
+    }
+}
+
+plugins {
+    tab-bar { path "tab-bar"; }
+    status-bar { path "status-bar"; }
+    strider { path "strider"; }
+    compact-bar { path "compact-bar"; }
+    session-manager { path "session-manager"; }
+}
+
+// Choose what to do when zellij receives SIGTERM, SIGINT, SIGQUIT or SIGHUP
+// eg. when terminal window with an active zellij session is closed
+// Options:
+//   - detach (Default)
+//   - quit
+//
+// on_force_close "quit"
+
+//  Send a request for a simplified ui (without arrow fonts) to plugins
+//  Options:
+//    - true
+//    - false (Default)
+//
+// simplified_ui true
+
+// Choose the path to the default shell that zellij will use for opening new panes
+// Default: $SHELL
+//
+default_shell "zsh"
+
+// Choose the path to override cwd that zellij will use for opening new panes
+//
+// default_cwd ""
+
+// Toggle between having pane frames around the panes
+// Options:
+//   - true (default)
+//   - false
+//
+pane_frames false
+
+// Toggle between having Zellij lay out panes according to a predefined set of layouts whenever possible
+// Options:
+//   - true (default)
+//   - false
+//
+// auto_layout true
+
+// Whether sessions should be serialized to the cache folder (including their tabs/panes, cwds and running commands) so that they can later be resurrected
+// Options:
+//   - true (default)
+//   - false
+//
+// session_serialization false
+
+// Whether pane viewports are serialized along with the session, default is false
+// Options:
+//   - true
+//   - false (default)
+// serialize_pane_viewport true
+
+// Scrollback lines to serialize along with the pane viewport when serializing sessions, 0
+// defaults to the scrollback size. If this number is higher than the scrollback size, it will
+// also default to the scrollback size. This does nothing if `serialize_pane_viewport` is not true.
+//
+// scrollback_lines_to_serialize 10000
+
+// Define color themes for Zellij
+// For more examples, see: https://github.com/zellij-org/zellij/tree/main/example/themes
+// Once these themes are defined, one of them should to be selected in the "theme" section of this file
+//
+ themes {
+     dracula {
+         fg 248 248 242
+         bg 40 42 54
+         red 255 85 85
+         green 80 250 123
+         yellow 241 250 140
+         blue 98 114 164
+         magenta 255 121 198
+         orange 255 184 108
+         cyan 139 233 253
+         black 0 0 0
+         white 255 255 255
+     }
+ }
+
+// Choose the theme that is specified in the themes section.
+// Default: default
+//
+theme "tokyonight"
+
+// The name of the default layout to load on startup
+// Default: "default"
+//
+// default_layout "compact"
+
+// Choose the mode that zellij uses when starting up.
+// Default: normal
+//
+// default_mode "locked"
+
+// Toggle enabling the mouse mode.
+// On certain configurations, or terminals this could
+// potentially interfere with copying text.
+// Options:
+//   - true (default)
+//   - false
+//
+// mouse_mode false
+
+// Configure the scroll back buffer size
+// This is the number of lines zellij stores for each pane in the scroll back
+// buffer. Excess number of lines are discarded in a FIFO fashion.
+// Valid values: positive integers
+// Default value: 10000
+//
+// scroll_buffer_size 10000
+
+// Provide a command to execute when copying text. The text will be piped to
+// the stdin of the program to perform the copy. This can be used with
+// terminal emulators which do not support the OSC 52 ANSI control sequence
+// that will be used by default if this option is not set.
+// Examples:
+//
+// copy_command "xclip -selection clipboard" // x11
+// copy_command "wl-copy"                    // wayland
+// copy_command "pbcopy"                     // osx
+
+// Choose the destination for copied text
+// Allows using the primary selection buffer (on x11/wayland) instead of the system clipboard.
+// Does not apply when using copy_command.
+// Options:
+//   - system (default)
+//   - primary
+//
+// copy_clipboard "primary"
+
+// Enable or disable automatic copy (and clear) of selection when releasing mouse
+// Default: true
+//
+// copy_on_select false
+
+// Path to the default editor to use to edit pane scrollbuffer
+// Default: $EDITOR or $VISUAL
+//
+scrollback_editor "nvim"
+
+// When attaching to an existing session with other users,
+// should the session be mirrored (true)
+// or should each user have their own cursor (false)
+// Default: false
+//
+// mirror_session true
+
+// The folder in which Zellij will look for layouts
+//
+layout_dir "~/.config/zellij/layouts/"
+
+// The folder in which Zellij will look for themes
+//
+// theme_dir "/path/to/my/theme_dir"
+
+// Enable or disable the rendering of styled and colored underlines (undercurl).
+// May need to be disabled for certain unsupported terminals
+// Default: true
+//
+// styled_underlines false
diff --git a/.envrc b/.envrc
index 894571bf..720e0193 100644
--- a/.envrc
+++ b/.envrc
@@ -1,3 +1,5 @@
-source_url "https://raw.githubusercontent.com/cachix/devenv/82c0147677e510b247d8b9165c54f73d32dfd899/direnvrc" "sha256-7u4iDd1nZpxL4tCzmPG0dQgC5V+/44Ba+tHkPob1v2k="
+if ! has nix_direnv_version || ! nix_direnv_version 3.0.6; then
+  source_url "https://raw.githubusercontent.com/nix-community/nix-direnv/3.0.6/direnvrc" "sha256-RYcUJaRMf8oF5LznDrlCXbkOQrywm0HDv1VjYGaJGdM="
+fi
 
-use devenv
+use flake
diff --git a/.gitconfig b/.gitconfig
deleted file mode 100644
index 7d99370e..00000000
--- a/.gitconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-[user]
-    name = connerohnesorge
-    email = conneroisu@outlook.com
-
-[push]
-    autoSetupRemote = true
-
-[pull]
-    rebase = true
-
-[filter "lfs"]
-    required = true
-    clean = git-lfs clean -- %f
-    smudge = git-lfs smudge -- %f
-    process = git-lfs filter-process
-[credential "https://github.com"]
-	helper = 
-	helper = !/run/current-system/sw/bin/gh auth git-credential
-[credential "https://gist.github.com"]
-	helper = 
-	helper = !/run/current-system/sw/bin/gh auth git-credential
diff --git a/.github/prompts/openspec-apply.prompt.md b/.github/prompts/openspec-apply.prompt.md
new file mode 100644
index 00000000..c964ead6
--- /dev/null
+++ b/.github/prompts/openspec-apply.prompt.md
@@ -0,0 +1,22 @@
+---
+description: Implement an approved OpenSpec change and keep tasks in sync.
+---
+
+$ARGUMENTS
+<!-- OPENSPEC:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `openspec/AGENTS.md` (located inside the `openspec/` directory—run `ls openspec` or `openspec update` if you don't see it) if you need additional OpenSpec conventions or clarifications.
+
+**Steps**
+Track these steps as TODOs and complete them one by one.
+1. Read `changes/<id>/proposal.md`, `design.md` (if present), and `tasks.md` to confirm scope and acceptance criteria.
+2. Work through tasks sequentially, keeping edits minimal and focused on the requested change.
+3. Confirm completion before updating statuses—make sure every item in `tasks.md` is finished.
+4. Update the checklist after all work is done so each task is marked `- [x]` and reflects reality.
+5. Reference `openspec list` or `openspec show <item>` when additional context is required.
+
+**Reference**
+- Use `openspec show <id> --json --deltas-only` if you need additional context from the proposal while implementing.
+<!-- OPENSPEC:END -->
diff --git a/.github/prompts/openspec-archive.prompt.md b/.github/prompts/openspec-archive.prompt.md
new file mode 100644
index 00000000..9378a6b6
--- /dev/null
+++ b/.github/prompts/openspec-archive.prompt.md
@@ -0,0 +1,26 @@
+---
+description: Archive a deployed OpenSpec change and update specs.
+---
+
+$ARGUMENTS
+<!-- OPENSPEC:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `openspec/AGENTS.md` (located inside the `openspec/` directory—run `ls openspec` or `openspec update` if you don't see it) if you need additional OpenSpec conventions or clarifications.
+
+**Steps**
+1. Determine the change ID to archive:
+   - If this prompt already includes a specific change ID (for example inside a `<ChangeId>` block populated by slash-command arguments), use that value after trimming whitespace.
+   - If the conversation references a change loosely (for example by title or summary), run `openspec list` to surface likely IDs, share the relevant candidates, and confirm which one the user intends.
+   - Otherwise, review the conversation, run `openspec list`, and ask the user which change to archive; wait for a confirmed change ID before proceeding.
+   - If you still cannot identify a single change ID, stop and tell the user you cannot archive anything yet.
+2. Validate the change ID by running `openspec list` (or `openspec show <id>`) and stop if the change is missing, already archived, or otherwise not ready to archive.
+3. Run `openspec archive <id> --yes` so the CLI moves the change and applies spec updates without prompts (use `--skip-specs` only for tooling-only work).
+4. Review the command output to confirm the target specs were updated and the change landed in `changes/archive/`.
+5. Validate with `openspec validate --strict` and inspect with `openspec show <id>` if anything looks off.
+
+**Reference**
+- Use `openspec list` to confirm change IDs before archiving.
+- Inspect refreshed specs with `openspec list --specs` and address any validation issues before handing off.
+<!-- OPENSPEC:END -->
diff --git a/.github/prompts/openspec-proposal.prompt.md b/.github/prompts/openspec-proposal.prompt.md
new file mode 100644
index 00000000..49ab5ce6
--- /dev/null
+++ b/.github/prompts/openspec-proposal.prompt.md
@@ -0,0 +1,26 @@
+---
+description: Scaffold a new OpenSpec change and validate strictly.
+---
+
+$ARGUMENTS
+<!-- OPENSPEC:START -->
+**Guardrails**
+- Favor straightforward, minimal implementations first and add complexity only when it is requested or clearly required.
+- Keep changes tightly scoped to the requested outcome.
+- Refer to `openspec/AGENTS.md` (located inside the `openspec/` directory—run `ls openspec` or `openspec update` if you don't see it) if you need additional OpenSpec conventions or clarifications.
+- Identify any vague or ambiguous details and ask the necessary follow-up questions before editing files.
+
+**Steps**
+1. Review `openspec/project.md`, run `openspec list` and `openspec list --specs`, and inspect related code or docs (e.g., via `rg`/`ls`) to ground the proposal in current behaviour; note any gaps that require clarification.
+2. Choose a unique verb-led `change-id` and scaffold `proposal.md`, `tasks.md`, and `design.md` (when needed) under `openspec/changes/<id>/`.
+3. Map the change into concrete capabilities or requirements, breaking multi-scope efforts into distinct spec deltas with clear relationships and sequencing.
+4. Capture architectural reasoning in `design.md` when the solution spans multiple systems, introduces new patterns, or demands trade-off discussion before committing to specs.
+5. Draft spec deltas in `changes/<id>/specs/<capability>/spec.md` (one folder per capability) using `## ADDED|MODIFIED|REMOVED Requirements` with at least one `#### Scenario:` per requirement and cross-reference related capabilities when relevant.
+6. Draft `tasks.md` as an ordered list of small, verifiable work items that deliver user-visible progress, include validation (tests, tooling), and highlight dependencies or parallelizable work.
+7. Validate with `openspec validate <id> --strict` and resolve every issue before sharing the proposal.
+
+**Reference**
+- Use `openspec show <id> --json --deltas-only` or `openspec show <spec> --type spec` to inspect details when validation fails.
+- Search existing requirements with `rg -n "Requirement:|Scenario:" openspec/specs` before writing new ones.
+- Explore the codebase with `rg <keyword>`, `ls`, or direct file reads so proposals align with current implementation realities.
+<!-- OPENSPEC:END -->
diff --git a/.github/workflows/check-aarch64-darwin.yaml b/.github/workflows/check-aarch64-darwin.yaml
deleted file mode 100644
index 28435d15..00000000
--- a/.github/workflows/check-aarch64-darwin.yaml
+++ /dev/null
@@ -1,14 +0,0 @@
-name: CI
-on:
-  workflow_dispatch:
-  push:
-  pull_request:
-
-jobs:
-  check:
-    runs-on: macos-latest
-    steps:
-      - uses: actions/checkout@v3
-      - uses: DeterminateSystems/nix-installer-action@main
-      - uses: DeterminateSystems/magic-nix-cache-action@main
-      - run: export NIXPKGS_ALLOW_UNFREE=1 && nix -L flake check
diff --git a/.github/workflows/check-x86_64-linux.yaml b/.github/workflows/check-x86_64-linux.yaml
deleted file mode 100644
index d91cf2fc..00000000
--- a/.github/workflows/check-x86_64-linux.yaml
+++ /dev/null
@@ -1,14 +0,0 @@
-name: CI
-on:
-  workflow_dispatch:
-  push:
-  pull_request:
-
-jobs:
-  check:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - uses: DeterminateSystems/nix-installer-action@main
-      - uses: DeterminateSystems/magic-nix-cache-action@main
-      - run: export NIXPKGS_ALLOW_UNFREE=1 && nix -L flake check
diff --git a/.github/workflows/ci.yml b/.github/workflows/ci.yml
new file mode 100644
index 00000000..c4f34c82
--- /dev/null
+++ b/.github/workflows/ci.yml
@@ -0,0 +1,75 @@
+on:
+  pull_request:
+  workflow_dispatch:
+  push:
+    branches:
+      - main
+
+env:
+  RUST_BACKTRACE: 1
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  # DeterminateCI:
+  #   uses: conneroisu/ci/.github/workflows/workflow.yml@main
+  #   permissions:
+  #     id-token: write
+  #     contents: read
+  #   with:
+  #     visibility: public
+  #     fail-fast: true
+
+  flake-check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # Linux x86_64
+          - os: ubuntu-latest
+            platform: linux
+            arch: x86_64
+            runner: ubuntu-latest
+
+            # No longer supported
+          # # macOS x86_64 (Intel)
+          # - os: macos-13
+          #   platform: macos
+          #   arch: x86_64
+          #   runner: macos-13
+
+          # macOS aarch64 (Apple Silicon M1/M2)
+          - os: macos-14
+            platform: macos
+            arch: aarch64
+            runner: macos-14
+
+          # Linux aarch64 (uncomment and configure self-hosted runner)
+          # - os: ubuntu-latest
+          #   platform: linux
+          #   arch: aarch64
+          #   runner: [self-hosted, linux, arm64]
+
+    runs-on: ${{ matrix.runner }}
+
+    name: Build (${{ matrix.platform }}-${{ matrix.arch }})
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Install Nix
+        uses: DeterminateSystems/determinate-nix-action@v3
+
+      - name: Run flake check
+        run: nix flake check .
+
+      - name: Show build info
+        run: |
+          echo "Platform: ${{ matrix.platform }}"
+          echo "Architecture: ${{ matrix.arch }}"
+          echo "Runner: ${{ matrix.runner }}"
+          uname -a
+          nix --version
diff --git a/.github/workflows/claude.yml b/.github/workflows/claude.yml
new file mode 100644
index 00000000..4e2977f0
--- /dev/null
+++ b/.github/workflows/claude.yml
@@ -0,0 +1,67 @@
+name: Claude Code
+
+on:
+  issue_comment:
+    types: [created]
+  pull_request_review_comment:
+    types: [created]
+  issues:
+    types: [opened, assigned]
+  pull_request_review:
+    types: [submitted]
+
+jobs:
+  claude:
+    if: |
+      (github.event_name == 'issue_comment' && contains(github.event.comment.body, '@claude')) ||
+      (github.event_name == 'pull_request_review_comment' && contains(github.event.comment.body, '@claude')) ||
+      (github.event_name == 'pull_request_review' && contains(github.event.review.body, '@claude')) ||
+      (github.event_name == 'issues' && (contains(github.event.issue.body, '@claude') || contains(github.event.issue.title, '@claude')))
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+      issues: write
+      id-token: write
+      actions: read # Required for Claude to read CI results on PRs
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 1
+      - uses: DeterminateSystems/nix-installer-action@main
+      - name: Allow Nix to be used in this shell environment
+        run: |
+          . /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+      - name: Run Claude Code
+        id: claude
+        uses: anthropics/claude-code-action@beta
+        with:
+          claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
+
+          # # This is an optional setting that allows Claude to read CI results on PRs
+          # additional_permissions: |
+          #   actions: read
+          
+          # Optional: Specify model (defaults to Claude Sonnet 4, uncomment for Claude Opus 4)
+          # model: "claude-opus-4-20250514"
+          
+          # Optional: Customize the trigger phrase (default: @claude)
+          # trigger_phrase: "/claude"
+          
+          # Optional: Trigger when specific user is assigned to an issue
+          assignee_trigger: "claude"
+          
+          # Optional: Allow Claude to run specific commands
+          allowed_tools: "Bash(npm run test),Bash(npm run lint),Bash(npm run typecheck),Bash(nix:*),Bash(git:*),Bash(jq:*),Bash(yq:*),Bash(uv:*),Bash(gh:*)"
+          
+          # Optional: Add custom instructions for Claude to customize its behavior for your project
+          # custom_instructions: |
+          #   Follow our coding standards
+          #   Ensure all new code has tests
+          #   Use TypeScript for new files
+          
+          # Optional: Custom environment variables for Claude
+          # claude_env: |
+          #   NODE_ENV: test
+
diff --git a/.github/workflows/copilot-setup-steps.yml b/.github/workflows/copilot-setup-steps.yml
new file mode 100644
index 00000000..82bad134
--- /dev/null
+++ b/.github/workflows/copilot-setup-steps.yml
@@ -0,0 +1,39 @@
+name: "Copilot Setup Steps"
+
+# Automatically run the setup steps when they are changed to allow for easy validation, and
+# allow manual testing through the repository's "Actions" tab
+on:
+  workflow_dispatch:
+  push:
+    paths:
+      - .github/workflows/copilot-setup-steps.yml
+  pull_request:
+    paths:
+      - .github/workflows/copilot-setup-steps.yml
+
+jobs:
+  # The job MUST be called `copilot-setup-steps` or it will not be picked up by Copilot.
+  copilot-setup-steps:
+    runs-on: ubuntu-latest
+
+    # Set the permissions to the lowest permissions possible needed for your steps.
+    # Copilot will be given its own token for its operations.
+    permissions:
+      # If you want to clone the repository as part of your setup steps, for example to install dependencies, you'll need the `contents: read` permission. If you don't clone the repository in your setup steps, Copilot will do this for you automatically after the steps complete.
+      contents: read
+
+    # You can define any steps you want, and they will run before the agent starts.
+    # If you do not check out your code, Copilot will do this for you.
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Install Nix
+        uses: DeterminateSystems/nix-installer-action@main
+
+      - name: Enable Magic Nix Cache
+        uses: DeterminateSystems/magic-nix-cache-action@main
+
+      - name: Setup Nix
+        run: |
+          nix develop --command echo "Nix environment ready"
diff --git a/.github/workflows/templates-check.yml b/.github/workflows/templates-check.yml
new file mode 100644
index 00000000..b4f583cb
--- /dev/null
+++ b/.github/workflows/templates-check.yml
@@ -0,0 +1,99 @@
+name: Templates Check
+
+on:
+  pull_request:
+  workflow_dispatch:
+  push:
+    branches:
+      - main
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  validate-templates:
+    permissions:
+      contents: read
+    
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # Linux x86_64
+          - os: ubuntu-latest
+            platform: linux
+            arch: x86_64
+            runner: ubuntu-latest
+            system: x86_64-linux
+
+          # macOS aarch64 (Apple Silicon M1/M2)
+          - os: macos-14
+            platform: macos
+            arch: aarch64
+            runner: macos-14
+            system: aarch64-darwin
+
+    runs-on: ${{ matrix.runner }}
+
+    name: Validate Templates (${{ matrix.platform }}-${{ matrix.arch }})
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Install Nix
+        uses: DeterminateSystems/determinate-nix-action@v3
+
+      - name: Validate templates with flake check
+        run: |
+          cd templates
+          failed=()
+
+          # Dynamically discover all templates with flake.nix
+          templates=()
+          for dir in */; do
+            if [ -f "$dir/flake.nix" ]; then
+              templates+=("${dir%/}")
+            fi
+          done
+
+          echo "Found ${#templates[@]} templates to validate: ${templates[*]}"
+
+          for template in "${templates[@]}"; do
+            echo "::group::Checking $template"
+
+            # Create a temporary directory for testing
+            test_dir=$(mktemp -d)
+
+            # Copy template to temp directory (including hidden files)
+            cp -r "$template"/. "$test_dir/"
+
+            cd "$test_dir"
+
+            # Run nix flake check
+            if nix flake check 2>&1; then
+              echo "✓ $template flake check succeeded"
+            else
+              echo "✗ $template flake check failed"
+              failed+=("$template")
+            fi
+
+            cd - > /dev/null
+            rm -rf "$test_dir"
+            echo "::endgroup::"
+          done
+
+          if [ ${#failed[@]} -ne 0 ]; then
+            echo "::error::The following templates failed flake check: ${failed[*]}"
+            exit 1
+          fi
+
+      - name: Show validation info
+        run: |
+          echo "Platform: ${{ matrix.platform }}"
+          echo "Architecture: ${{ matrix.arch }}"
+          echo "System: ${{ matrix.system }}"
+          echo "Runner: ${{ matrix.runner }}"
+          uname -a
+          nix --version
diff --git a/.gitignore b/.gitignore
index 6616a337..81c48fd6 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,16 +16,16 @@
 .config/obsidian/Service Worker/CacheStorage/*
 .config/obsidian/Service Worker/ScriptCache/
 .config/obsidian/Service Worker/ScriptCache/*
-.vscode-insiders/
-HyprPanel/
-./.config/ags/
-# Devenv
-.devenv*
 devenv.local.nix
-.devenv
-
-# direnv
-.direnv
-
-# pre-commit
 .pre-commit-config.yaml
+.direnv*
+.devenv*
+.obsidian/
+.env
+__pycache__/
+*.pyc
+*.so
+logs/
+.crush
+result
+.env
diff --git a/.gitmodules b/.gitmodules
index 3a916ee2..5555506d 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -1,3 +1,6 @@
 [submodule ".config/nvim"]
 	path = .config/nvim
 	url = https://github.com/conneroisu/nvim.git
+[submodule "infra"]
+	path = infra
+	url = https://github.com/conneroisu/infra
diff --git a/.luarc.json b/.luarc.json
new file mode 100644
index 00000000..cd39ca7e
--- /dev/null
+++ b/.luarc.json
@@ -0,0 +1,5 @@
+{
+    "diagnostics.globals": [
+        "pandoc"
+    ]
+}
\ No newline at end of file
diff --git a/.sops.yaml b/.sops.yaml
index 588474d9..13469379 100644
--- a/.sops.yaml
+++ b/.sops.yaml
@@ -1,7 +1,7 @@
 keys:
-  - &admin_conner age1ypzvf88u53f2rlzpyvfvex55qug49usrm339qvpve8jq3dtpqefs3kkf66
+  - &admin_conner age1kshcv6p7tj3sclmm02lgg3dtlqnlvcprutt0gkh6lvj5w2paep9sc75vv5
 creation_rules:
-  - path_regex: secrets/secrets.yaml
+  - path_regex: .secrets/secrets.yaml
     key_groups:
     - age:
       - *admin_conner
diff --git a/.stowrc b/.stowrc
index 70072b9c..43e36c51 100644
--- a/.stowrc
+++ b/.stowrc
@@ -11,4 +11,29 @@
 --ignore .mypy_cache/
 --ignore ./.venv
 --ignore venv
---ignore ./hosts/
+--ignore ./nix/
+--ignore .envrc
+--ignore .direnv
+--ignore .devenv
+--ignore .pre-commit-config.yaml
+--ignore assets/
+--ignore assets
+--ignore devenv/
+--ignore devenv
+--ignore homes/
+--ignore lib/
+--ignore modules/
+--ignore modules
+--ignore hosts/
+--ignore hosts
+--ignore systems/
+--ignore packages/
+--ignore shells/
+--ignore README.md
+--ignore clean.sh
+--ignore .github
+--ignore CLAUDE.md
+--ignore AGENTS.md
+--ignore .claude
+--ignore .crush
+--ignore result
diff --git a/.zshrc b/.zshrc
index 77d0e106..6fa75f36 100644
--- a/.zshrc
+++ b/.zshrc
@@ -1,53 +1,88 @@
-eval "$(zellij setup --generate-auto-start zsh)"
+autoload -Uz compinit && compinit
 ZINIT_HOME="${XDG_DATA_HOME:-${HOME}/.local/share}/zinit/zinit.git"
 [ ! -d $ZINIT_HOME ] && mkdir -p "$(dirname $ZINIT_HOME)"
 [ ! -d $ZINIT_HOME/.git ] && git clone https://github.com/zdharma-continuum/zinit.git "$ZINIT_HOME"
 source "${ZINIT_HOME}/zinit.zsh"
-
+export ANTHROPIC_LOG=error
 export BUN_INSTALL="$HOME/.bun"
-export FLYCTL_INSTALL="/home/connerohnesorge/.fly"
-export GOPATH="$HOME/.go"
 export PATH="$HOME/.cargo/bin:$PATH"
+export CLAUDE_CODE_ENABLE_TELEMETRY="0"
+export CLAUDE_CODE_FILE_READ_MAX_OUTPUT_TOKENS=450000 # 450k
+export CLAUDE_CODE_DISABLE_TERMINAL_TITLE=1
+
 path=(
     $HOME/.cargo/bin
     $BUN_INSTALL/bin
-    $HOME/zig
-    $HOME/.local/bin
-    $HOME/flutter/bin
-    $GOROOT/bin
-    $GOPATH/bin
-    $FLYCTL_INSTALL/bin
-    /home/connerohnesorge/.turso
-    /home/connerohnesorge/.config/herd-lite/bin
-    /user/local/bin/
     $path
 )
-export PATH=$PATH:path
+export PATH=$PATH:$path
 
-if [[ "$OSTYPE" == "linux-gnu"* ]]; then
-    # eval "$(/home/linuxbrew/.linuxbrew/bin/brew shellenv)"
-elif [[ "$OSTYPE" == "darwin"* ]]; then
-    eval "$(/opt/homebrew/bin/brew shellenv)"
-fi
 HISTFILE=~/.zsh_history
 HISTSIZE=10000
 SAVEHIST=10000
 # Defines the characters that zsh considers part of a word (^W)
 WORDCHARS='*?[]~=&;!#$%^(){}<>,|`'
 setopt appendhistory sharehistory hist_ignore_space hist_ignore_all_dups hist_save_no_dups hist_ignore_dups hist_reduce_blanks hist_find_no_dups
-# alias cf='cd $(find . -type d -path "./.git" -prune -o -type d -print | fzf --reverse --preview "ls --color {}")'
-alias cf='cd $(find . -type d -path "./.git" -prune -o -type d -not -path "*/\.*" -print | fzf --reverse --preview "ls --color {}")'
-alias nvimf='nvim $(fzf --preview "bat --color=always {}")'
 
-# eval "$(goenv init -)" # TODO: Remove this once moved to nixos
 eval "$(fzf --zsh)"
 eval "$(atuin init zsh)"
-eval "$(zoxide init zsh --cmd cd)"
+
+if command -v zoxide &>/dev/null && [[ "$CLAUDECODE" != "1" ]]; then
+  eval "$(zoxide init --cmd cd zsh)"
+  
+  # Ensure __zoxide_z function exists
+  if ! type __zoxide_z &>/dev/null; then
+    function __zoxide_z() {
+      if [[ "$#" -eq 0 ]]; then
+        builtin cd ~
+      elif [[ "$#" -eq 1 ]] && { [[ -d "$1" ]] || [[ "$1" = '-' ]] || [[ "$1" =~ ^[-+][0-9]$ ]]; }; then
+        builtin cd "$1"
+      else
+        local result
+        result="$(command zoxide query --exclude "$(pwd)" -- "$@")" && builtin cd "${result}"
+      fi
+    }
+  fi
+fi
 eval "$(starship init zsh)"
-eval "$(turso completion zsh)"
-eval "$(fly completion zsh)"
-export LD_LIBRARY_PATH=/usr/local/lib64/:$LD_LIBRARY_PATH
-export PHP_INI_SCAN_DIR="/home/connerohnesorge/.config/herd-lite/bin:$PHP_INI_SCAN_DIR"
+source <(carapace chmod zsh)
+
+autoload -Uz edit-command-line
+zle -N edit-command-line
+bindkey '^x^e' edit-command-line
+
+# cfi is find all ignoring .git
+alias cfi='cd $(find . -type d -path "./.git" -prune -o -type d -not -path "*/\.*" -print | fzf --reverse --preview "ls --color {}")'
+# cf is find all - shell function wrapper for cf program
+cf() {
+    local dir
+    dir=$(command cf "$@")
+    if [ -n "$dir" ]; then
+        cd "$dir"
+    fi
+}
+alias g='git'
+alias git-reset='git checkout main && git pull'
+
+# nvimfi is find all files ignoring .git
+alias nvimfi='nvim "$(find . -type f -path "./.git" -prune -o -type f -not -path "*/\.*" -print | fzf --preview "bat --color=always {}")"'
+
+alias nxi='nix'
+alias wtr='git worktree remove'
+alias wtl='git worktree list'
+alias wta='git worktree add'
+alias wt='git worktree'
+alias wtd='git worktree remove'
+alias k='kubectl'
+alias nix-env='echo "panic: nix-env is disabled (#61)" >&2 && false'
+alias vim='nvim'
+alias v='nvim'
+alias vf='nvimf'
+alias vfi='nvimfi'
+alias os='spectr'
+alias osv='spectr validate --all --strict'
+alias kl='klaude'
+
 
 # Load a few important annexes, without Turbo
 zi light-mode for \
@@ -56,13 +91,12 @@ zi light-mode for \
     zdharma-continuum/zinit-annex-patch-dl \
     zdharma-continuum/zinit-annex-rust
 
-
 zi light zsh-users/zsh-autosuggestions
 zi load zsh-users/zsh-completions
 zi load zsh-users/zsh-syntax-highlighting
 zi load nix-community/nix-zsh-completions
 zi load Aloxaf/fzf-tab
-zi load jeffreytse/zsh-vi-mode
+zi load zpm-zsh/clipboard
 
 bindkey '^p' history-search-backward
 bindkey '^n' history-search-forward
@@ -74,3 +108,28 @@ zstyle ':completion:*' menu no
 
 # bun completions
 [ -s "/home/connerohnesorge/.bun/_bun" ] && source "/home/connerohnesorge/.bun/_bun"
+
+# Key bindings for word-by-word navigation for auto-completion
+bindkey '^[[1;5C' forward-word      # Ctrl+Right - move forward one word
+bindkey '^[[1;5D' backward-word     # Ctrl+Left - move backward one word
+
+if [[ "$OSTYPE" == "darwin"* ]]; then
+    export PATH="/Users/connerohnesorge/.config/herd-lite/bin:$PATH"
+    export PHP_INI_SCAN_DIR="/Users/connerohnesorge/.config/herd-lite/bin:$PHP_INI_SCAN_DIR"
+fi
+source <(kubectl completion zsh)
+
+
+# Turso
+export PATH="$PATH:/home/connerohnesorge/.turso"
+
+export NVM_DIR="$HOME/.config/nvm"
+[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
+[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion
+
+# opencode
+export PATH=/home/connerohnesorge/.opencode/bin:$PATH
+
+
+# Added by CodeRabbit CLI installer
+export PATH="$HOME/.local/bin:$PATH"
diff --git a/AGENTS.md b/AGENTS.md
new file mode 100644
index 00000000..05fa394c
--- /dev/null
+++ b/AGENTS.md
@@ -0,0 +1,96 @@
+<!-- OPENSPEC:START -->
+# OpenSpec Instructions
+
+These instructions are for AI assistants working in this project.
+
+Always open `@/openspec/AGENTS.md` when the request:
+- Mentions planning or proposals (words like proposal, spec, change, plan)
+- Introduces new capabilities, breaking changes, architecture shifts, or big performance/security work
+- Sounds ambiguous and you need the authoritative spec before coding
+
+Use `@/openspec/AGENTS.md` to learn:
+- How to create and apply change proposals
+- Spec format and conventions
+- Project structure and guidelines
+
+Keep this managed block so 'openspec update' can refresh the instructions.
+
+<!-- OPENSPEC:END -->
+
+# AGENTS.md - Coding Agent Guidelines
+
+## Project Structure
+
+```
+dotfiles/
+├── flake.nix                    # Main flake configuration
+├── hosts/                      # Host-specific configurations
+│   ├── oxe-nixos/             # Desktop NixOS config
+│   ├── xps-nixos/             # Laptop NixOS config
+│   └── mac-nix/               # macOS Darwin config
+├── modules/                    # Modular configuration system
+│   ├── config/                # Core configuration modules
+│   │   ├── constants.nix      # User constants (username, email)
+│   │   ├── user.nix          # User account configuration
+│   │   ├── hosts.nix         # Host type definitions
+│   │   ├── args.nix          # Shared arguments
+│   │   ├── home.nix          # Home Manager patterns
+│   │   └── rices.nix         # Theme system config
+│   ├── features/              # System-level capabilities
+│   │   ├── engineer.nix      # Development environment
+│   │   ├── hyprland.nix      # Wayland desktop
+│   │   ├── nvidia.nix        # NVIDIA graphics
+│   │   ├── audio.nix         # Audio system
+│   │   ├── bluetooth.nix     # Bluetooth support
+│   │   ├── amd.nix           # AMD graphics
+│   │   ├── secrets.nix       # Secret management
+│   │   ├── student.nix       # Student tools
+│   │   ├── darknet.nix       # Privacy/security
+│   │   └── power-efficient.nix # Power management
+│   └── programs/              # Custom applications
+│       ├── dx/               # Flake editor script
+│       ├── catls/            # Ruby file lister
+│       ├── cmbd/             # Go command builder
+│       ├── convert_img/      # Python image converter
+│       ├── splitm/           # Screen splitter
+│       └── proton-x/         # Proton launcher
+├── rices/                     # Theme configurations
+│   └── dark/                 # Dark theme with Stylix
+├── templates/                 # Development templates
+│   ├── devshell/             # General development
+│   ├── rust-shell/           # Rust projects
+│   ├── go-shell/             # Go projects
+│   ├── go-templ-shell/       # Go + Templ
+│   ├── remix-js-shell/       # Remix.js projects
+│   ├── laravel-shell/        # Laravel PHP
+│   ├── lua-shell/            # Lua development
+│   ├── zig-shell/            # Zig projects
+│   ├── cuda-shell/           # CUDA development
+│   ├── rust-web-shell/       # Rust web projects
+│   └── bun-shell/            # Bun.js projects
+└── pkgs/                     # Custom package definitions
+```
+
+## Build/Test Commands
+- **Lint**: `nix develop -c lint` (runs statix, deadnix, nix flake check)
+- **Format**: `nix fmt` (alejandra for Nix, rustfmt, black for Python)
+- **Single Test**: `cd modules/programs/convert_img && python -m pytest tests/test_convert_img.py::TestClassName::test_method`
+- **Build Module**: `cd modules/programs/<program-name> && nix build`
+- **Rebuild System**: `darwin-rebuild switch --flake .` (macOS) or `sudo nixos-rebuild switch --flake .` (NixOS)
+- **Template Usage**: `nix flake init -t github:connerohnesorge/dotfiles#<template-name>`
+
+## Code Style Guidelines
+- **Nix**: Use alejandra formatting, prefer `let...in` blocks, use `delib.module` pattern for modules
+- **Python**: Black formatting, type hints required, docstrings for classes/functions, pytest for tests
+- **Imports**: Group by stdlib, third-party, local; use explicit imports over wildcards
+- **Naming**: snake_case for files/functions, PascalCase for classes, kebab-case for Nix attributes
+- **Error Handling**: Use proper exception types, validate inputs early, provide meaningful error messages
+- **Module Structure**: Features in `modules/features/`, programs in `modules/programs/`, configs in `modules/config/`
+
+## Architecture Notes
+- Uses Denix framework for modular configuration management
+- Platform-specific sections: `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled`
+- Auto-discovery from `./hosts ./modules ./rices` paths
+- Feature dependencies resolved automatically through module system
+- Multi-platform support: NixOS, macOS (nix-darwin), Home Manager
+- Theme system integrated with Stylix for consistent styling
diff --git a/CLAUDE.md b/CLAUDE.md
new file mode 100644
index 00000000..7d2af9d3
--- /dev/null
+++ b/CLAUDE.md
@@ -0,0 +1,649 @@
+# CLAUDE.md
+
+This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
+
+## Repository Overview
+
+This is a NixOS/Home Manager dotfiles repository using the **Denix** framework for modular configuration management. It supports multiple platforms (NixOS, macOS via nix-darwin, Home Manager) with unified configuration.
+
+## Common Tools
+
+Use the nixos and context7 mcp for background info (both of these should be used atleast 3 times anytime you edit a nix file)
+
+### Development Commands
+All commands should be run using `nix develop -c <command>` to ensure the proper shell environment is loaded.
+- `nix develop -c lint` - Run linting tools (statix, deadnix, nix flake check) (if on nixos, should run `nixos-rebuild build --flake .` for better results)
+- `nix develop -c dx` - Edit the flake.nix file
+- `nix fmt` - Format code using treefmt
+
+#### Testing
+- Individual program tests: `cd modules/programs/<program-name> && nix build` to test custom program builds
+- convert_img tests: `cd modules/programs/convert_img && python -m pytest tests/`
+- if you edit any program in `modules/programs/`, you should run the edited program manually to ensure it works in addition to the tests.
+
+#### Installation/Rebuild
+
+```bash
+# macOS
+darwin-rebuild switch --flake . --show-trace
+
+# Linux (Home Manager only)
+nix build .#homeConfigurations.x86_64-linux.activationPackage
+
+# NixOS
+nixos-rebuild build --flake .
+```
+
+### Templates
+
+Create development shells with:
+```bash
+nix flake init -t github:connerohnesorge/dotfiles#<template-name>
+```
+Available templates: devshell, rust-shell, go-shell, go-templ-shell, remix-js-shell, laravel-shell, phoenix-shell
+
+### Debugging and Troubleshooting
+
+- `nix flake check` - Validate flake outputs and check for errors
+- `nix eval .#nixosConfigurations.<hostname>.config.system.build.toplevel` - Check NixOS configuration evaluation
+- `nix show-derivation` - Inspect derivation details for debugging builds
+- `nixos-rebuild build --flake . --show-trace` - Build without switching to catch configuration errors
+
+## Architecture
+
+### Module System Overview
+
+The repository uses the **Denix framework** for modular configuration management, providing type-safe, composable modules with automatic discovery and loading.
+
+### Module Types and Structure
+
+**Configuration Modules** (`modules/config/`):
+- `constants.nix` - Read-only user constants (username, email, etc.)
+- `user.nix` - User account configuration for NixOS and Darwin
+- `hosts.nix` - Host type definitions and feature mapping system
+- `args.nix` - Shared arguments between nixos and home-manager configurations
+- `home.nix` - Home Manager configuration patterns
+- `rices.nix` - Theme system configuration
+
+**Feature Modules** (`modules/features/`):
+- System-level capabilities that can be enabled per-host
+- Use `delib.module` with `singleEnableOption false` pattern
+- Platform-specific sections: `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled`
+- Examples: `engineer.nix`, `hyprland.nix`, `nvidia.nix`, `audio.nix`, `bluetooth.nix`
+
+**Custom Program Modules** (`modules/programs/`):
+- Self-contained applications with source code and build expressions
+- Cross-platform deployment support (nixos/darwin)
+- Examples: `catls/` (Ruby), `cmbd/` (Go), `convert_img/` (Python), `dx/` (shell script)
+
+**Host Configurations** (`hosts/`):
+- Use `delib.host` with type classification (desktop/laptop/server)
+- Feature enablement through `myconfig.features.*`
+- Platform-specific configuration sections
+
+**Theme Configurations** (`rices/`):
+- Use `delib.rice` with Stylix integration
+- Consistent theming across applications using Base16 color schemes
+
+### Denix Framework Patterns
+
+**Module Creation**:
+```nix
+delib.module {
+  name = "feature-name";
+  options.myconfig.features.featureName = singleEnableOption false;
+  nixos.ifEnabled = { /* NixOS config */ };
+  darwin.ifEnabled = { /* macOS config */ };
+  home.ifEnabled = { /* Home Manager config */ };
+}
+```
+
+**Host Configuration**:
+```nix
+delib.host {
+  type = "desktop"; # or "laptop", "server"
+  features = { featureName = true; };
+  rice = "dark";
+  nixos = { /* NixOS-specific config */ };
+  darwin = { /* Darwin-specific config */ };
+}
+```
+
+**Custom Program Packaging**:
+```nix
+delib.module {
+  name = "program-name";
+  nixos.ifEnabled.environment.systemPackages = [ pkgs.program-name ];
+  darwin.ifEnabled.environment.systemPackages = [ pkgs.program-name ];
+}
+```
+
+### Module Discovery and Loading
+
+The `flake.nix` uses Denix's auto-discovery system:
+```nix
+denix.lib.configurations {
+  homeManagerUser = "connerohnesorge";
+  paths = [./hosts ./modules ./rices]; # Auto-discovery paths
+}
+```
+
+This automatically creates:
+- `nixosConfigurations`
+- `homeConfigurations` 
+- `darwinConfigurations`
+
+### Feature Dependencies
+
+Features automatically enable required programs:
+- `engineer.enable = true` → enables development tools (`dx`, `convert_img`, etc.)
+- `hyprland.enable = true` → enables Wayland desktop with supporting tools
+- Dependencies resolved through the Denix module system
+
+### Multi-Platform Support
+
+**Conditional Configuration**: Separate platform sections in modules
+**Shared Configuration**: Maximize reuse between platforms where possible
+**Platform Detection**: Automatic handling of nixos vs darwin differences
+
+### Important Files
+- `flake.nix` - Main entry point with system configurations
+- `modules/config/constants.nix` - User constants (username, email, etc.)
+- `modules/config/hosts.nix` - Host type definitions and feature mappings
+- `shell.nix` - Development environment with custom scripts
+
+## Development Notes
+
+### Working with Modules
+
+**Creating New Feature Modules**:
+1. Create a new `.nix` file in `modules/features/`
+2. Use the `delib.module` pattern with `singleEnableOption false`
+3. Define platform-specific configuration in `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled` sections
+4. Features are automatically discovered and can be enabled in host configurations
+
+**Creating Custom Program Modules**:
+1. Create a directory in `modules/programs/` with source code and `default.nix`
+2. Define the package derivation with cross-platform support
+3. Export the module using `delib.module` pattern
+4. Programs are automatically available after rebuild
+
+**Modifying Host Configurations**:
+- Edit files in `hosts/` to enable/disable features
+- Use `myconfig.features.featureName = true` to enable features
+- Platform-specific settings go in `nixos` or `darwin` sections
+
+### Best Practices
+
+- **Module Isolation**: Each module should be self-contained with minimal external dependencies
+- **Platform Awareness**: Always consider both nixos and darwin when creating modules
+- **Feature Dependencies**: Let the Denix system handle automatic dependency resolution
+- **Theme Integration**: Use Stylix-compatible configuration for consistent theming
+- **Type Safety**: Leverage Nix's type system through proper option definitions
+
+### Templates and Development
+
+Templates provide isolated development environments for different languages/frameworks:
+- Each template is a complete flake.nix with development dependencies
+- Use for project-specific development without affecting system configuration
+- Available for: Go, Rust, Elixir/Phoenix, Laravel, Remix.js, Lua, and general devshell
+
+<!-- spectr:START -->
+# Spectr Instructions
+
+Instructions for AI coding assistants using Spectr for spec-driven development.
+
+## TL;DR Quick Checklist
+
+- Search existing work: `spectr spec list --long`, `spectr list` (use `rg` only for full-text search)
+- Decide scope: new capability vs modify existing capability
+- Pick a unique `change-id`: kebab-case, verb-led (`add-`, `update-`, `remove-`, `refactor-`)
+- Scaffold: `proposal.md`, `tasks.md`, `design.md` (only if needed), and delta specs per affected capability
+- Write deltas: use `## ADDED|MODIFIED|REMOVED|RENAMED Requirements`; include at least one `#### Scenario:` per requirement
+- Validate: `spectr validate [change-id] --strict` and fix issues
+- Request approval: Do not start implementation until proposal is approved
+
+## Three-Stage Workflow
+
+### Stage 1: Creating Changes
+Create proposal when you need to:
+- Add features or functionality
+- Make breaking changes (API, schema)
+- Change architecture or patterns
+- Optimize performance (changes behavior)
+- Update security patterns
+
+Triggers (examples):
+- "Help me create a change proposal"
+- "Help me plan a change"
+- "Help me create a proposal"
+- "I want to create a spec proposal"
+- "I want to create a spec"
+
+Loose matching guidance:
+- Contains one of: `proposal`, `change`, `spec`
+- With one of: `create`, `plan`, `make`, `start`, `help`
+
+Skip proposal for:
+- Bug fixes (restore intended behavior)
+- Typos, formatting, comments
+- Dependency updates (non-breaking)
+- Configuration changes
+- Tests for existing behavior
+
+**Workflow**
+1. Review `spectr/project.md`, `spectr list`, and `spectr list --specs` to understand current context.
+2. Choose a unique verb-led `change-id` and scaffold `proposal.md`, `tasks.md`, optional `design.md`, and spec deltas under `spectr/changes/<id>/`.
+3. Draft spec deltas using `## ADDED|MODIFIED|REMOVED Requirements` with at least one `#### Scenario:` per requirement.
+4. Run `spectr validate <id> --strict` and resolve any issues before sharing the proposal.
+
+### Stage 2: Implementing Changes
+Track these steps as TODOs and complete them one by one.
+1. **Read proposal.md** - Understand what's being built
+2. **Read design.md** (if exists) - Review technical decisions
+3. **Read tasks.md** - Get implementation checklist
+4. **Implement tasks sequentially** - Complete in order
+5. **Confirm completion** - Ensure every item in `tasks.md` is finished before updating statuses
+6. **Update checklist** - After all work is done, set every task to `- [x]` so the list reflects reality
+7. **Approval gate** - Do not start implementation until the proposal is reviewed and approved
+
+### Stage 3: Archiving Changes
+After deployment, create separate PR to:
+- Move `changes/[name]/` → `changes/archive/YYYY-MM-DD-[name]/`
+- Update `specs/` if capabilities changed
+- Use `spectr archive <change-id> --skip-specs --yes` for tooling-only changes (always pass the change ID explicitly)
+- Run `spectr validate --strict` to confirm the archived change passes checks
+
+## Before Any Task
+
+**Context Checklist:**
+- [ ] Read relevant specs in `specs/[capability]/spec.md`
+- [ ] Check pending changes in `changes/` for conflicts
+- [ ] Read `spectr/project.md` for conventions
+- [ ] Run `spectr list` to see active changes
+- [ ] Run `spectr list --specs` to see existing capabilities
+
+**Before Creating Specs:**
+- Always check if capability already exists
+- Prefer modifying existing specs over creating duplicates
+- Use `spectr show [spec]` to review current state
+- If request is ambiguous, ask 1–2 clarifying questions before scaffolding
+
+### Search Guidance
+- Enumerate specs: `spectr spec list --long` (or `--json` for scripts)
+- Enumerate changes: `spectr list` (or `spectr change list --json` - deprecated but available)
+- Show details:
+  - Spec: `spectr show <spec-id> --type spec` (use `--json` for filters)
+  - Change: `spectr show <change-id> --json --deltas-only`
+- Full-text search (use ripgrep): `rg -n "Requirement:|Scenario:" spectr/specs`
+
+## Quick Start
+
+### CLI Commands
+
+```bash
+# Essential commands
+spectr list                  # List active changes
+spectr list --specs          # List specifications
+spectr show [item]           # Display change or spec
+spectr validate [item]       # Validate changes or specs
+spectr archive <change-id> [--yes|-y]   # Archive after deployment (add --yes for non-interactive runs)
+
+# Project management
+spectr init [path]           # Initialize Spectr
+spectr update [path]         # Update instruction files
+
+# Interactive mode
+spectr show                  # Prompts for selection
+spectr validate              # Bulk validation mode
+
+# Debugging
+spectr show [change] --json --deltas-only
+spectr validate [change] --strict
+```
+
+### Command Flags
+
+- `--json` - Machine-readable output
+- `--type change|spec` - Disambiguate items
+- `--strict` - Comprehensive validation
+- `--no-interactive` - Disable prompts
+- `--skip-specs` - Archive without spec updates
+- `--yes`/`-y` - Skip confirmation prompts (non-interactive archive)
+
+## Directory Structure
+
+```
+spectr/
+├── project.md              # Project conventions
+├── specs/                  # Current truth - what IS built
+│   └── [capability]/       # Single focused capability
+│       ├── spec.md         # Requirements and scenarios
+│       └── design.md       # Technical patterns
+├── changes/                # Proposals - what SHOULD change
+│   ├── [change-name]/
+│   │   ├── proposal.md     # Why, what, impact
+│   │   ├── tasks.md        # Implementation checklist
+│   │   ├── design.md       # Technical decisions (optional; see criteria)
+│   │   └── specs/          # Delta changes
+│   │       └── [capability]/
+│   │           └── spec.md # ADDED/MODIFIED/REMOVED
+│   └── archive/            # Completed changes
+```
+
+## Creating Change Proposals
+
+### Decision Tree
+
+```
+New request?
+├─ Bug fix restoring spec behavior? → Fix directly
+├─ Typo/format/comment? → Fix directly
+├─ New feature/capability? → Create proposal
+├─ Breaking change? → Create proposal
+├─ Architecture change? → Create proposal
+└─ Unclear? → Create proposal (safer)
+```
+
+### Proposal Structure
+
+1. **Create directory:** `changes/[change-id]/` (kebab-case, verb-led, unique)
+
+2. **Write proposal.md:**
+```markdown
+# Change: [Brief description of change]
+
+## Why
+[1-2 sentences on problem/opportunity]
+
+## What Changes
+- [Bullet list of changes]
+- [Mark breaking changes with **BREAKING**]
+
+## Impact
+- Affected specs: [list capabilities]
+- Affected code: [key files/systems]
+```
+
+3. **Create spec deltas:** `specs/[capability]/spec.md`
+```markdown
+## ADDED Requirements
+### Requirement: New Feature
+The system SHALL provide...
+
+#### Scenario: Success case
+- **WHEN** user performs action
+- **THEN** expected result
+
+## MODIFIED Requirements
+### Requirement: Existing Feature
+[Complete modified requirement]
+
+## REMOVED Requirements
+### Requirement: Old Feature
+**Reason**: [Why removing]
+**Migration**: [How to handle]
+```
+If multiple capabilities are affected, create multiple delta files under `changes/[change-id]/specs/<capability>/spec.md`—one per capability.
+
+4. **Create tasks.md:**
+```markdown
+## 1. Implementation
+- [ ] 1.1 Create database schema
+- [ ] 1.2 Implement API endpoint
+- [ ] 1.3 Add frontend component
+- [ ] 1.4 Write tests
+```
+
+5. **Create design.md when needed:**
+Create `design.md` if any of the following apply; otherwise omit it:
+- Cross-cutting change (multiple services/modules) or a new architectural pattern
+- New external dependency or significant data model changes
+- Security, performance, or migration complexity
+- Ambiguity that benefits from technical decisions before coding
+
+Minimal `design.md` skeleton:
+```markdown
+## Context
+[Background, constraints, stakeholders]
+
+## Goals / Non-Goals
+- Goals: [...]
+- Non-Goals: [...]
+
+## Decisions
+- Decision: [What and why]
+- Alternatives considered: [Options + rationale]
+
+## Risks / Trade-offs
+- [Risk] → Mitigation
+
+## Migration Plan
+[Steps, rollback]
+
+## Open Questions
+- [...]
+```
+
+## Spec File Format
+
+### Critical: Scenario Formatting
+
+**CORRECT** (use #### headers):
+```markdown
+#### Scenario: User login success
+- **WHEN** valid credentials provided
+- **THEN** return JWT token
+```
+
+**WRONG** (don't use bullets or bold):
+```markdown
+- **Scenario: User login**  ❌
+**Scenario**: User login     ❌
+### Scenario: User login      ❌
+```
+
+Every requirement MUST have at least one scenario.
+
+### Requirement Wording
+- Use SHALL/MUST for normative requirements (avoid should/may unless intentionally non-normative)
+
+### Delta Operations
+
+- `## ADDED Requirements` - New capabilities
+- `## MODIFIED Requirements` - Changed behavior
+- `## REMOVED Requirements` - Deprecated features
+- `## RENAMED Requirements` - Name changes
+
+Headers matched with `trim(header)` - whitespace ignored.
+
+#### When to use ADDED vs MODIFIED
+- ADDED: Introduces a new capability or sub-capability that can stand alone as a requirement. Prefer ADDED when the change is orthogonal (e.g., adding "Slash Command Configuration") rather than altering the semantics of an existing requirement.
+- MODIFIED: Changes the behavior, scope, or acceptance criteria of an existing requirement. Always paste the full, updated requirement content (header + all scenarios). The archiver will replace the entire requirement with what you provide here; partial deltas will drop previous details.
+- RENAMED: Use when only the name changes. If you also change behavior, use RENAMED (name) plus MODIFIED (content) referencing the new name.
+
+Common pitfall: Using MODIFIED to add a new concern without including the previous text. This causes loss of detail at archive time. If you aren't explicitly changing the existing requirement, add a new requirement under ADDED instead.
+
+Authoring a MODIFIED requirement correctly:
+1) Locate the existing requirement in `spectr/specs/<capability>/spec.md`.
+2) Copy the entire requirement block (from `### Requirement: ...` through its scenarios).
+3) Paste it under `## MODIFIED Requirements` and edit to reflect the new behavior.
+4) Ensure the header text matches exactly (whitespace-insensitive) and keep at least one `#### Scenario:`.
+
+Example for RENAMED:
+```markdown
+## RENAMED Requirements
+- FROM: `### Requirement: Login`
+- TO: `### Requirement: User Authentication`
+```
+
+## Troubleshooting
+
+### Common Errors
+
+**"Change must have at least one delta"**
+- Check `changes/[name]/specs/` exists with .md files
+- Verify files have operation prefixes (## ADDED Requirements)
+
+**"Requirement must have at least one scenario"**
+- Check scenarios use `#### Scenario:` format (4 hashtags)
+- Don't use bullet points or bold for scenario headers
+
+**Silent scenario parsing failures**
+- Exact format required: `#### Scenario: Name`
+- Debug with: `spectr show [change] --json --deltas-only`
+
+### Validation Tips
+
+```bash
+# Always use strict mode for comprehensive checks
+spectr validate [change] --strict
+
+# Debug delta parsing
+spectr show [change] --json | jq '.deltas'
+
+# Check specific requirement
+spectr show [spec] --json -r 1
+```
+
+## Happy Path Script
+
+```bash
+# 1) Explore current state
+spectr spec list --long
+spectr list
+# Optional full-text search:
+# rg -n "Requirement:|Scenario:" spectr/specs
+# rg -n "^#|Requirement:" spectr/changes
+
+# 2) Choose change id and scaffold
+CHANGE=add-two-factor-auth
+mkdir -p spectr/changes/$CHANGE/{specs/auth}
+printf "## Why\\n...\\n\\n## What Changes\\n- ...\\n\\n## Impact\\n- ...\\n" > spectr/changes/$CHANGE/proposal.md
+printf "## 1. Implementation\\n- [ ] 1.1 ...\\n" > spectr/changes/$CHANGE/tasks.md
+
+# 3) Add deltas (example)
+cat > spectr/changes/$CHANGE/specs/auth/spec.md << 'EOF'
+## ADDED Requirements
+### Requirement: Two-Factor Authentication
+Users MUST provide a second factor during login.
+
+#### Scenario: OTP required
+- **WHEN** valid credentials are provided
+- **THEN** an OTP challenge is required
+EOF
+
+# 4) Validate
+spectr validate $CHANGE --strict
+```
+
+## Multi-Capability Example
+
+```
+spectr/changes/add-2fa-notify/
+├── proposal.md
+├── tasks.md
+└── specs/
+    ├── auth/
+    │   └── spec.md   # ADDED: Two-Factor Authentication
+    └── notifications/
+        └── spec.md   # ADDED: OTP email notification
+```
+
+auth/spec.md
+```markdown
+## ADDED Requirements
+### Requirement: Two-Factor Authentication
+...
+```
+
+notifications/spec.md
+```markdown
+## ADDED Requirements
+### Requirement: OTP Email Notification
+...
+```
+
+## Best Practices
+
+### Simplicity First
+- Default to <100 lines of new code
+- Single-file implementations until proven insufficient
+- Avoid frameworks without clear justification
+- Choose boring, proven patterns
+
+### Complexity Triggers
+Only add complexity with:
+- Performance data showing current solution too slow
+- Concrete scale requirements (>1000 users, >100MB data)
+- Multiple proven use cases requiring abstraction
+
+### Clear References
+- Use `file.ts:42` format for code locations
+- Reference specs as `specs/auth/spec.md`
+- Link related changes and PRs
+
+### Capability Naming
+- Use verb-noun: `user-auth`, `payment-capture`
+- Single purpose per capability
+- 10-minute understandability rule
+- Split if description needs "AND"
+
+### Change ID Naming
+- Use kebab-case, short and descriptive: `add-two-factor-auth`
+- Prefer verb-led prefixes: `add-`, `update-`, `remove-`, `refactor-`
+- Ensure uniqueness; if taken, append `-2`, `-3`, etc.
+
+## Tool Selection Guide
+
+| Task | Tool | Why |
+|------|------|-----|
+| Find files by pattern | Glob | Fast pattern matching |
+| Search code content | Grep | Optimized regex search |
+| Read specific files | Read | Direct file access |
+| Explore unknown scope | Task | Multi-step investigation |
+
+## Error Recovery
+
+### Change Conflicts
+1. Run `spectr list` to see active changes
+2. Check for overlapping specs
+3. Coordinate with change owners
+4. Consider combining proposals
+
+### Validation Failures
+1. Run with `--strict` flag
+2. Check JSON output for details
+3. Verify spec file format
+4. Ensure scenarios properly formatted
+
+### Missing Context
+1. Read project.md first
+2. Check related specs
+3. Review recent archives
+4. Ask for clarification
+
+## Quick Reference
+
+### Stage Indicators
+- `changes/` - Proposed, not yet built
+- `specs/` - Built and deployed
+- `archive/` - Completed changes
+
+### File Purposes
+- `proposal.md` - Why and what
+- `tasks.md` - Implementation steps
+- `design.md` - Technical decisions
+- `spec.md` - Requirements and behavior
+
+### CLI Essentials
+```bash
+spectr list              # What's in progress?
+spectr show [item]       # View details
+spectr validate --strict # Is it correct?
+spectr archive <change-id> [--yes|-y]  # Mark complete (add --yes for automation)
+```
+
+Remember: Specs are truth. Changes are proposals. Keep them in sync.
+
+<!-- spectr:END -->
diff --git a/GEMINI.md b/GEMINI.md
new file mode 100644
index 00000000..88f3149a
--- /dev/null
+++ b/GEMINI.md
@@ -0,0 +1,184 @@
+# CLAUDE.md
+
+This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
+
+## Repository Overview
+
+This is a sophisticated NixOS/Home Manager dotfiles repository using the **Denix** framework for modular configuration management. It supports multiple platforms (NixOS, macOS via nix-darwin, Home Manager) with unified configuration.
+
+## Common Commands
+
+All commands should be run using `nix develop -c <command>` to ensure the proper shell environment is loaded.
+
+### Development
+- `nix develop -c lint` - Run linting tools (statix, deadnix, nix flake check) (if on nixos, should run `nixos-rebuild build --flake .` for better results)
+- `nix develop -c dx` - Edit the flake.nix file
+- `nix fmt` - Format code using treefmt (alejandra for Nix, rustfmt, black for Python)
+
+### Testing
+- Individual program tests: `cd modules/programs/<program-name> && nix build` to test custom program builds
+- Convert_img tests: `cd modules/programs/convert_img && python -m pytest tests/`
+
+### Installation/Rebuild
+```bash
+# macOS
+darwin-rebuild switch --flake . --show-trace
+
+# Linux (Home Manager only)
+nix build .#homeConfigurations.x86_64-linux.activationPackage
+
+# NixOS
+sudo nixos-rebuild switch --flake .
+```
+
+### Templates
+Create development shells with:
+```bash
+nix flake init -t github:connerohnesorge/dotfiles#<template-name>
+```
+Available templates: devshell, rust-shell, go-shell, go-templ-shell, remix-js-shell, laravel-shell, phoenix-shell
+
+### Debugging and Troubleshooting
+- `nix flake check` - Validate flake outputs and check for errors
+- `nix eval .#nixosConfigurations.<hostname>.config.system.build.toplevel` - Check NixOS configuration evaluation
+- `nix show-derivation` - Inspect derivation details for debugging builds
+- `nixos-rebuild build --flake . --show-trace` - Build without switching to catch configuration errors
+
+## Architecture
+
+### Module System Overview
+
+The repository uses the **Denix framework** for modular configuration management, providing type-safe, composable modules with automatic discovery and loading.
+
+### Module Types and Structure
+
+**Configuration Modules** (`modules/config/`):
+- `constants.nix` - Read-only user constants (username, email, etc.)
+- `user.nix` - User account configuration for NixOS and Darwin
+- `hosts.nix` - Host type definitions and feature mapping system
+- `args.nix` - Shared arguments between nixos and home-manager configurations
+- `home.nix` - Home Manager configuration patterns
+- `rices.nix` - Theme system configuration
+
+**Feature Modules** (`modules/features/`):
+- System-level capabilities that can be enabled per-host
+- Use `delib.module` with `singleEnableOption false` pattern
+- Platform-specific sections: `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled`
+- Examples: `engineer.nix`, `hyprland.nix`, `nvidia.nix`, `audio.nix`, `bluetooth.nix`
+
+**Custom Program Modules** (`modules/programs/`):
+- Self-contained applications with source code and build expressions
+- Cross-platform deployment support (nixos/darwin)
+- Examples: `catls/` (Ruby), `cmbd/` (Go), `convert_img/` (Python), `dx/` (shell script)
+
+**Host Configurations** (`hosts/`):
+- Use `delib.host` with type classification (desktop/laptop/server)
+- Feature enablement through `myconfig.features.*`
+- Platform-specific configuration sections
+
+**Theme Configurations** (`rices/`):
+- Use `delib.rice` with Stylix integration
+- Consistent theming across applications using Base16 color schemes
+
+### Denix Framework Patterns
+
+**Module Creation**:
+```nix
+delib.module {
+  name = "feature-name";
+  options.myconfig.features.featureName = singleEnableOption false;
+  nixos.ifEnabled = { /* NixOS config */ };
+  darwin.ifEnabled = { /* macOS config */ };
+  home.ifEnabled = { /* Home Manager config */ };
+}
+```
+
+**Host Configuration**:
+```nix
+delib.host {
+  type = "desktop"; # or "laptop", "server"
+  features = { featureName = true; };
+  rice = "dark";
+  nixos = { /* NixOS-specific config */ };
+  darwin = { /* Darwin-specific config */ };
+}
+```
+
+**Custom Program Packaging**:
+```nix
+delib.module {
+  name = "program-name";
+  nixos.ifEnabled.environment.systemPackages = [ pkgs.program-name ];
+  darwin.ifEnabled.environment.systemPackages = [ pkgs.program-name ];
+}
+```
+
+### Module Discovery and Loading
+
+The `flake.nix` uses Denix's auto-discovery system:
+```nix
+denix.lib.configurations {
+  homeManagerUser = "connerohnesorge";
+  paths = [./hosts ./modules ./rices]; # Auto-discovery paths
+}
+```
+
+This automatically creates:
+- `nixosConfigurations`
+- `homeConfigurations` 
+- `darwinConfigurations`
+
+### Feature Dependencies
+
+Features automatically enable required programs:
+- `engineer.enable = true` → enables development tools (`dx`, `md2pdf`, `convert_img`, etc.)
+- `hyprland.enable = true` → enables Wayland desktop with supporting tools
+- Dependencies resolved through the Denix module system
+
+### Multi-Platform Support
+
+**Conditional Configuration**: Separate platform sections in modules
+**Shared Configuration**: Maximize reuse between platforms where possible
+**Platform Detection**: Automatic handling of nixos vs darwin differences
+
+### Important Files
+- `flake.nix` - Main entry point with system configurations
+- `modules/config/constants.nix` - User constants (username, email, etc.)
+- `modules/config/hosts.nix` - Host type definitions and feature mappings
+- `shell.nix` - Development environment with custom scripts
+
+## Development Notes
+
+### Working with Modules
+
+**Creating New Feature Modules**:
+1. Create a new `.nix` file in `modules/features/`
+2. Use the `delib.module` pattern with `singleEnableOption false`
+3. Define platform-specific configuration in `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled` sections
+4. Features are automatically discovered and can be enabled in host configurations
+
+**Creating Custom Program Modules**:
+1. Create a directory in `modules/programs/` with source code and `default.nix`
+2. Define the package derivation with cross-platform support
+3. Export the module using `delib.module` pattern
+4. Programs are automatically available after rebuild
+
+**Modifying Host Configurations**:
+- Edit files in `hosts/` to enable/disable features
+- Use `myconfig.features.featureName = true` to enable features
+- Platform-specific settings go in `nixos` or `darwin` sections
+
+### Best Practices
+
+- **Module Isolation**: Each module should be self-contained with minimal external dependencies
+- **Platform Awareness**: Always consider both nixos and darwin when creating modules
+- **Feature Dependencies**: Let the Denix system handle automatic dependency resolution
+- **Theme Integration**: Use Stylix-compatible configuration for consistent theming
+- **Type Safety**: Leverage Nix's type system through proper option definitions
+
+### Templates and Development
+
+Templates provide isolated development environments for different languages/frameworks:
+- Each template is a complete flake.nix with development dependencies
+- Use for project-specific development without affecting system configuration
+- Available for: Go, Rust, Elixir/Phoenix, Laravel, Remix.js, Lua, and general devshell
diff --git a/README.md b/README.md
index 6db16b9c..01ba6bba 100644
--- a/README.md
+++ b/README.md
@@ -1,15 +1,25 @@
-# dotfiles - Conner Ohnesorge
+# Dotfiles - Conner Ohnesorge
+[![.github/workflows/ci.yml](https://github.com/connerohnesorge/dotfiles/actions/workflows/ci.yml/badge.svg)](https://github.com/connerohnesorge/dotfiles/actions/workflows/ci.yml)
 
 ## Introduction
 
-dotfiles for my personal setup
+![Pasted image 20250224165002.png](assets/Pasted%20image%2020250224165002.png)
 
-Uses [snowfall](https://github.com/snowfallorg/lib) for configuration management.
+A NixOS/Home Manager dotfiles repository using the **Denix** framework for modular configuration management. This repository provides unified configuration across multiple platforms (NixOS, macOS via nix-darwin, Home Manager) with type-safe, composable modules and automatic discovery.
+
+### Key Features
+
+- **Modular Architecture**: Feature-based configuration system with automatic dependency resolution
+- **Multi-Platform Support**: Unified configuration for NixOS, macOS (Darwin), and standalone Home Manager
+- **Type Safety**: Leverages Nix's type system through proper option definitions
+- **Theme System**: Stylix integration with Base16 color schemes for consistent theming
+- **Custom Programs**: Self-contained applications with cross-platform deployment
+- **Development Templates**: Ready-to-use flake templates for various programming languages
 
 ## Installation
 
 ```bash
-git clone --recurse-submodules -j8 https://github.com/conneroisu/dotfiles.git
+git clone --recurse-submodules -j8 https://github.com/connerohnesorge/dotfiles.git
 cd dotfiles
 
 # MACOS
@@ -21,3 +31,112 @@ nix build .#homeConfigurations.x86_64-linux.activationPackage
 # NIXOS
 sudo nixos-rebuild switch --flake .
 ```
+
+## Architecture
+
+This repository uses the **Denix framework** for modular configuration management, providing type-safe, composable modules with automatic discovery and loading.
+
+### Module System
+
+**Configuration Modules** (`modules/config/`):
+- `constants.nix` - Read-only user constants (username, email, etc.)
+- `user.nix` - User account configuration for NixOS and Darwin
+- `hosts.nix` - Host type definitions and feature mapping system
+- `args.nix` - Shared arguments between nixos and home-manager configurations
+- `home.nix` - Home Manager configuration patterns
+- `rices.nix` - Theme system configuration
+
+**Feature Modules** (`modules/features/`):
+- System-level capabilities that can be enabled per-host
+- Platform-specific sections: `nixos.ifEnabled`, `darwin.ifEnabled`, `home.ifEnabled`
+- Examples: `engineer.nix`, `hyprland.nix`, `nvidia.nix`, `audio.nix`, `bluetooth.nix`
+
+**Custom Program Modules** (`modules/programs/`):
+- Self-contained applications with source code and build expressions
+- Cross-platform deployment support (nixos/darwin)
+- Examples: `catls/` (Ruby), `cmbd/` (Go), `convert_img/` (Python), `dx/` (shell script)
+
+### Host Configuration
+
+Hosts are configured using the `delib.host` pattern with:
+- Type classification (desktop/laptop/server)
+- Feature enablement through `myconfig.features.*`
+- Platform-specific configuration sections
+
+### Development Commands
+
+All commands should be run using `nix develop -c <command>` to ensure proper shell environment:
+
+```bash
+# Linting and validation
+nix develop -c lint              # Run linting tools (statix, deadnix, nix flake check)
+nix fmt                          # Format code using treefmt
+
+# Development
+nix develop -c dx                # Edit the flake.nix file
+
+# Testing
+cd modules/programs/<program> && nix build  # Test custom program builds
+cd modules/programs/convert_img && python -m pytest tests/  # Run Python tests
+
+# Debugging
+nix flake check                  # Validate flake outputs
+nixos-rebuild build --flake . --show-trace  # Build without switching (NixOS)
+```
+
+## Development Templates
+
+This repository provides ready-to-use flake templates for various programming languages and frameworks. These templates create isolated development environments without affecting your system configuration.
+
+### Available Templates
+
+```bash
+# General development shell
+nix flake init -t github:connerohnesorge/dotfiles#devshell
+
+# Language-specific templates
+nix flake init -t github:connerohnesorge/dotfiles#rust-shell      # Rust development
+nix flake init -t github:connerohnesorge/dotfiles#go-shell        # Go development  
+nix flake init -t github:connerohnesorge/dotfiles#go-templ-shell  # Go + Templ
+nix flake init -t github:connerohnesorge/dotfiles#remix-js-shell  # Remix.js development
+nix flake init -t github:connerohnesorge/dotfiles#laravel-shell   # Laravel development
+nix flake init -t github:connerohnesorge/dotfiles#phoenix-shell   # Elixir Phoenix development
+```
+
+### Template Features
+
+- **Isolated Environments**: Each template provides development dependencies without global installation
+- **Complete Toolchains**: Includes language servers, formatters, and build tools
+- **Consistent Configuration**: Standardized development environment across projects
+- **Easy Extension**: Templates can be customized for project-specific needs
+
+### Extending Templates
+
+Templates can be extended with package builds. Example for Go projects:
+
+```nix
+{
+  inputs.dotfiles.url = "github:connerohnesorge/dotfiles";
+  outputs = {
+    self,
+    nixpkgs,
+    dotfiles,
+  }: let
+    pkgs = nixpkgs.legacyPackages.x86_64-linux;
+  in {
+    packages.x86_64-linux.default = pkgs.buildGoModule {
+      pname = "my-go-project";
+      version = "0.0.1";
+      src = ./.;
+      vendorHash = "sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=";
+      doCheck = false;
+      meta = with pkgs.lib; {
+        description = "My Go project";
+        homepage = "https://github.com/my-go-project";
+        license = licenses.mit;
+        maintainers = with maintainers; [connerohnesorge];
+      };
+    };
+  };
+}
+```
diff --git a/Taskfile.yaml b/Taskfile.yaml
deleted file mode 100644
index 22a289cf..00000000
--- a/Taskfile.yaml
+++ /dev/null
@@ -1,14 +0,0 @@
-# https://taskfile.dev
-
-version: '3'
-
-vars:
-  GREETING: Hello, World!
-
-tasks:
-  stow:
-    cmds:
-      - sh ./stow.sh
-  nix:
-    cmds:
-      - darwin-rebuild switch --flake ~/.config/nix-darwin
diff --git a/assets/Pasted image 20250224165002.png b/assets/Pasted image 20250224165002.png
new file mode 100644
index 00000000..e9881cbe
Binary files /dev/null and b/assets/Pasted image 20250224165002.png differ
diff --git a/devenv.lock b/devenv.lock
deleted file mode 100644
index 740f71af..00000000
--- a/devenv.lock
+++ /dev/null
@@ -1,116 +0,0 @@
-{
-  "nodes": {
-    "devenv": {
-      "locked": {
-        "dir": "src/modules",
-        "lastModified": 1735557386,
-        "owner": "cachix",
-        "repo": "devenv",
-        "rev": "1cd2afada1b407d1f7d2eca91984ed5c85ffb2f7",
-        "type": "github"
-      },
-      "original": {
-        "dir": "src/modules",
-        "owner": "cachix",
-        "repo": "devenv",
-        "type": "github"
-      }
-    },
-    "flake-compat": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1733328505,
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "ff81ac966bb2cae68946d5ed5fc4994f96d0ffec",
-        "type": "github"
-      },
-      "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "type": "github"
-      }
-    },
-    "gitignore": {
-      "inputs": {
-        "nixpkgs": [
-          "pre-commit-hooks",
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1709087332,
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
-        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
-        "type": "github"
-      },
-      "original": {
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
-        "type": "github"
-      }
-    },
-    "nixpkgs": {
-      "locked": {
-        "lastModified": 1733477122,
-        "owner": "cachix",
-        "repo": "devenv-nixpkgs",
-        "rev": "7bd9e84d0452f6d2e63b6e6da29fe73fac951857",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "ref": "rolling",
-        "repo": "devenv-nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs-stable": {
-      "locked": {
-        "lastModified": 1735563628,
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "b134951a4c9f3c995fd7be05f3243f8ecd65d798",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-24.05",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "pre-commit-hooks": {
-      "inputs": {
-        "flake-compat": "flake-compat",
-        "gitignore": "gitignore",
-        "nixpkgs": [
-          "nixpkgs"
-        ],
-        "nixpkgs-stable": "nixpkgs-stable"
-      },
-      "locked": {
-        "lastModified": 1734797603,
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
-        "rev": "f0f0dc4920a903c3e08f5bdb9246bb572fcae498",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
-        "type": "github"
-      }
-    },
-    "root": {
-      "inputs": {
-        "devenv": "devenv",
-        "nixpkgs": "nixpkgs",
-        "pre-commit-hooks": "pre-commit-hooks"
-      }
-    }
-  },
-  "root": "root",
-  "version": 7
-}
diff --git a/devenv.nix b/devenv.nix
deleted file mode 100644
index 0afa48d6..00000000
--- a/devenv.nix
+++ /dev/null
@@ -1,42 +0,0 @@
-{
-  pkgs,
-  # lib,
-  # config,
-  # inputs,
-  ...
-}: {
-  name = "dotfiles";
-
-  languages = {
-    nix.enable = true;
-  };
-
-  git-hooks = {
-    hooks = {
-      alejandra.enable = true;
-      deadnix.enable = true;
-    };
-  };
-
-  packages = with pkgs; [
-    git
-    podman
-    flyctl
-    wireguard-tools
-  ];
-
-  scripts = {
-    latest.exec = ''
-      cd $(git rev-parse --show-toplevel) && git add . && git commit -m "latest" && git push
-    '';
-    dx.exec = ''$EDITOR $(git rev-parse --show-toplevel)/devenv.nix'';
-  };
-
-  enterShell = ''git status'';
-  enterTest = ''
-    echo "Running tests"
-    git --version | grep --color=auto "${pkgs.git.version}"
-  '';
-
-  cachix.enable = true;
-}
diff --git a/devenv.yaml b/devenv.yaml
deleted file mode 100644
index 68616a49..00000000
--- a/devenv.yaml
+++ /dev/null
@@ -1,4 +0,0 @@
-# yaml-language-server: $schema=https://devenv.sh/devenv.schema.json
-inputs:
-  nixpkgs:
-    url: github:cachix/devenv-nixpkgs/rolling
diff --git a/flake.lock b/flake.lock
index ca31492f..ad5819d2 100644
--- a/flake.lock
+++ b/flake.lock
@@ -1,15 +1,48 @@
 {
   "nodes": {
+    "aquamarine": {
+      "inputs": {
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "hyprwayland-scanner": [
+          "hyprland",
+          "hyprwayland-scanner"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767024902,
+        "narHash": "sha256-sMdk6QkMDhIOnvULXKUM8WW8iyi551SWw2i6KQHbrrU=",
+        "owner": "hyprwm",
+        "repo": "aquamarine",
+        "rev": "b8a0c5ba5a9fbd2c660be7dd98bdde0ff3798556",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "aquamarine",
+        "type": "github"
+      }
+    },
     "base16": {
       "inputs": {
         "fromYaml": "fromYaml"
       },
       "locked": {
-        "lastModified": 1732200724,
-        "narHash": "sha256-+R1BH5wHhfnycySb7Sy5KbYEaTJZWm1h+LW1OtyhiTs=",
+        "lastModified": 1755819240,
+        "narHash": "sha256-qcMhnL7aGAuFuutH4rq9fvAhCpJWVHLcHVZLtPctPlo=",
         "owner": "SenchoPens",
         "repo": "base16.nix",
-        "rev": "153d52373b0fb2d343592871009a286ec8837aec",
+        "rev": "75ed5e5e3fce37df22e49125181fa37899c3ccd6",
         "type": "github"
       },
       "original": {
@@ -21,27 +54,28 @@
     "base16-fish": {
       "flake": false,
       "locked": {
-        "lastModified": 1622559957,
-        "narHash": "sha256-PebymhVYbL8trDVVXxCvZgc0S5VxI7I1Hv4RMSquTpA=",
+        "lastModified": 1765809053,
+        "narHash": "sha256-XCUQLoLfBJ8saWms2HCIj4NEN+xNsWBlU1NrEPcQG4s=",
         "owner": "tomyun",
         "repo": "base16-fish",
-        "rev": "2f6dd973a9075dabccd26f1cded09508180bf5fe",
+        "rev": "86cbea4dca62e08fb7fd83a70e96472f92574782",
         "type": "github"
       },
       "original": {
         "owner": "tomyun",
         "repo": "base16-fish",
+        "rev": "86cbea4dca62e08fb7fd83a70e96472f92574782",
         "type": "github"
       }
     },
     "base16-helix": {
       "flake": false,
       "locked": {
-        "lastModified": 1725860795,
-        "narHash": "sha256-Z2o8VBPW3I+KKTSfe25kskz0EUj7MpUh8u355Z1nVsU=",
+        "lastModified": 1760703920,
+        "narHash": "sha256-m82fGUYns4uHd+ZTdoLX2vlHikzwzdu2s2rYM2bNwzw=",
         "owner": "tinted-theming",
         "repo": "base16-helix",
-        "rev": "7f795bf75d38e0eea9fed287264067ca187b88a9",
+        "rev": "d646af9b7d14bff08824538164af99d0c521b185",
         "type": "github"
       },
       "original": {
@@ -53,783 +87,2170 @@
     "base16-vim": {
       "flake": false,
       "locked": {
-        "lastModified": 1731949548,
-        "narHash": "sha256-XIDexXM66sSh5j/x70e054BnUsviibUShW7XhbDGhYo=",
+        "lastModified": 1732806396,
+        "narHash": "sha256-e0bpPySdJf0F68Ndanwm+KWHgQiZ0s7liLhvJSWDNsA=",
         "owner": "tinted-theming",
         "repo": "base16-vim",
-        "rev": "61165b1632409bd55e530f3dbdd4477f011cadc6",
+        "rev": "577fe8125d74ff456cf942c733a85d769afe58b7",
         "type": "github"
       },
       "original": {
         "owner": "tinted-theming",
         "repo": "base16-vim",
+        "rev": "577fe8125d74ff456cf942c733a85d769afe58b7",
         "type": "github"
       }
     },
-    "brew-src": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1731323744,
-        "narHash": "sha256-SxUQm4cTHcaoPQHoXe26ZV8cZiMWBGow8MjE4L+MckM=",
-        "owner": "Homebrew",
-        "repo": "brew",
-        "rev": "254bf3fe9d8fa2e1b2fb55dbcf535b2d870180c4",
-        "type": "github"
-      },
-      "original": {
-        "owner": "Homebrew",
-        "ref": "4.4.5",
-        "repo": "brew",
-        "type": "github"
-      }
-    },
-    "darwin": {
+    "blink": {
       "inputs": {
+        "fenix": "fenix",
+        "flake-parts": "flake-parts",
         "nixpkgs": [
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1733570843,
-        "narHash": "sha256-sQJAxY1TYWD1UyibN/FnN97paTFuwBw3Vp3DNCyKsMk=",
-        "owner": "LnL7",
-        "repo": "nix-darwin",
-        "rev": "a35b08d09efda83625bef267eb24347b446c80b8",
+        "lastModified": 1767539980,
+        "narHash": "sha256-HJaj9wi0FZB9vvHpeQFeDZAth5Qi3QrlFJJiiqGl5/8=",
+        "owner": "Saghen",
+        "repo": "blink.cmp",
+        "rev": "6a4914ca987453464a7dfc7fc237a992adb567d0",
         "type": "github"
       },
       "original": {
-        "owner": "LnL7",
-        "ref": "master",
-        "repo": "nix-darwin",
+        "owner": "Saghen",
+        "repo": "blink.cmp",
         "type": "github"
       }
     },
-    "disko": {
+    "blueprint": {
       "inputs": {
         "nixpkgs": [
+          "nix-ai-tools",
           "nixpkgs"
-        ]
+        ],
+        "systems": "systems_5"
       },
       "locked": {
-        "lastModified": 1735468753,
-        "narHash": "sha256-2dt1nOe9zf9pDkf5Kn7FUFyPRo581s0n90jxYXJ94l0=",
-        "owner": "nix-community",
-        "repo": "disko",
-        "rev": "84a5b93637cc16cbfcc61b6e1684d626df61eb21",
+        "lastModified": 1767386128,
+        "narHash": "sha256-BJDu7dIMauO2nYRSL4aI8wDNtEm2KOb7lDKP3hxdrpo=",
+        "owner": "numtide",
+        "repo": "blueprint",
+        "rev": "0ed984d51a3031065925ab08812a5434f40b93d4",
         "type": "github"
       },
       "original": {
-        "owner": "nix-community",
-        "repo": "disko",
+        "owner": "numtide",
+        "repo": "blueprint",
         "type": "github"
       }
     },
-    "flake-compat": {
-      "flake": false,
+    "conclaude": {
+      "inputs": {
+        "crane": [
+          "crane"
+        ],
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay",
+        "treefmt-nix": "treefmt-nix"
+      },
       "locked": {
-        "lastModified": 1696426674,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "lastModified": 1767829142,
+        "narHash": "sha256-CO2VJ/G8mgB49dfxsknT/Q9BEznoMQ9RHAaqQ1RsnGk=",
+        "owner": "connerohnesorge",
+        "repo": "conclaude",
+        "rev": "6c7ee630a7b0c92d59a4d1ae8867d4f8642c3591",
         "type": "github"
       },
       "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
+        "owner": "connerohnesorge",
+        "repo": "conclaude",
         "type": "github"
       }
     },
-    "flake-compat_2": {
-      "flake": false,
+    "crane": {
       "locked": {
-        "lastModified": 1650374568,
-        "narHash": "sha256-Z+s0J8/r907g149rllvwhb4pKi8Wam5ij0st8PwAh+E=",
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "b4a34015c698c7793d592d66adbab377907a2be8",
+        "lastModified": 1767744144,
+        "narHash": "sha256-9/9ntI0D+HbN4G0TrK3KmHbTvwgswz7p8IEJsWyef8Q=",
+        "owner": "ipetkov",
+        "repo": "crane",
+        "rev": "2fb033290bf6b23f226d4c8b32f7f7a16b043d7e",
         "type": "github"
       },
       "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
+        "owner": "ipetkov",
+        "repo": "crane",
         "type": "github"
       }
     },
-    "flake-compat_3": {
-      "flake": false,
+    "crane_2": {
       "locked": {
-        "lastModified": 1696426674,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "lastModified": 1762538466,
+        "narHash": "sha256-8zrIPl6J+wLm9MH5ksHcW7BUHo7jSNOu0/hA0ohOOaM=",
+        "owner": "ipetkov",
+        "repo": "crane",
+        "rev": "0cea393fffb39575c46b7a0318386467272182fe",
         "type": "github"
       },
       "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
+        "owner": "ipetkov",
+        "repo": "crane",
         "type": "github"
       }
     },
-    "flake-parts": {
+    "denix": {
       "inputs": {
-        "nixpkgs-lib": [
-          "nur",
+        "home-manager": [
+          "home-manager"
+        ],
+        "nix-darwin": [
+          "nix-darwin"
+        ],
+        "nixpkgs": [
           "nixpkgs"
-        ]
+        ],
+        "nixpkgs-lib": "nixpkgs-lib_2",
+        "pre-commit-hooks": "pre-commit-hooks"
       },
       "locked": {
-        "lastModified": 1733312601,
-        "narHash": "sha256-4pDvzqnegAfRkPwO3wmwBhVi/Sye1mzps0zHWYnP88c=",
-        "owner": "hercules-ci",
-        "repo": "flake-parts",
-        "rev": "205b12d8b7cd4802fbcb8e8ef6a0f1408781a4f9",
+        "lastModified": 1758123851,
+        "narHash": "sha256-sbKwqBOLI423TvXvzlX2UGZR4pE1M8C7KXi0699ImmQ=",
+        "owner": "yunfachi",
+        "repo": "denix",
+        "rev": "d90f816b7b93304e5d5e69d429de0052f64d5149",
         "type": "github"
       },
       "original": {
-        "owner": "hercules-ci",
-        "repo": "flake-parts",
+        "owner": "yunfachi",
+        "repo": "denix",
         "type": "github"
       }
     },
-    "flake-utils": {
+    "determinate": {
       "inputs": {
-        "systems": "systems"
+        "determinate-nixd-aarch64-darwin": "determinate-nixd-aarch64-darwin",
+        "determinate-nixd-aarch64-linux": "determinate-nixd-aarch64-linux",
+        "determinate-nixd-x86_64-linux": "determinate-nixd-x86_64-linux",
+        "nix": "nix",
+        "nixpkgs": "nixpkgs_4"
       },
       "locked": {
-        "lastModified": 1705309234,
-        "narHash": "sha256-uNRRNRKmJyCRC/8y1RqBkqWBLM034y4qN7EprSdmgyA=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "1ef2e671c3b0c19053962c07dbda38332dcebf26",
-        "type": "github"
+        "lastModified": 1766549083,
+        "narHash": "sha256-G1Hljg7vIBt8n9cxO382YAZWtZU/mYfQcg3icdNG8RQ=",
+        "rev": "ba8999fac986e70f52b4cba15047be7bbb7b6346",
+        "revCount": 318,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/DeterminateSystems/determinate/3.15.1/019b4e8a-dc22-75db-aef5-a447efbb1a13/source.tar.gz"
       },
       "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
+        "type": "tarball",
+        "url": "https://flakehub.com/f/DeterminateSystems/determinate/%2A"
       }
     },
-    "flake-utils-plus": {
-      "inputs": {
-        "flake-utils": "flake-utils_3"
-      },
+    "determinate-nixd-aarch64-darwin": {
+      "flake": false,
       "locked": {
-        "lastModified": 1715533576,
-        "narHash": "sha256-fT4ppWeCJ0uR300EH3i7kmgRZnAVxrH+XtK09jQWihk=",
-        "owner": "gytis-ivaskevicius",
-        "repo": "flake-utils-plus",
-        "rev": "3542fe9126dc492e53ddd252bb0260fe035f2c0f",
-        "type": "github"
+        "narHash": "sha256-uWDS94cAYprGj+AwuT42nuuDDicRLj1S0JwalZGeBRU=",
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/macOS"
       },
       "original": {
-        "owner": "gytis-ivaskevicius",
-        "repo": "flake-utils-plus",
-        "rev": "3542fe9126dc492e53ddd252bb0260fe035f2c0f",
-        "type": "github"
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/macOS"
       }
     },
-    "flake-utils_2": {
-      "inputs": {
-        "systems": "systems_3"
-      },
+    "determinate-nixd-aarch64-linux": {
+      "flake": false,
       "locked": {
-        "lastModified": 1710146030,
-        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
-        "type": "github"
+        "narHash": "sha256-uHBcZCh2/Bj5/88TDihupA336tSQDk7s5lVP66IDAX0=",
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/aarch64-linux"
       },
       "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/aarch64-linux"
       }
     },
-    "flake-utils_3": {
-      "inputs": {
-        "systems": "systems_4"
-      },
+    "determinate-nixd-x86_64-linux": {
+      "flake": false,
       "locked": {
-        "lastModified": 1694529238,
-        "narHash": "sha256-zsNZZGTGnMOf9YpHKJqMSsa0dXbfmxeoJ7xHlrt+xmY=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "ff7b65b44d01cf9ba6a71320833626af21126384",
-        "type": "github"
+        "narHash": "sha256-y+l05H6GNv/1WcrMztDYem8VBWqjc9gNg4WjeQ1PQxo=",
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/x86_64-linux"
       },
       "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
+        "type": "file",
+        "url": "https://install.determinate.systems/determinate-nixd/tag/v3.15.1/x86_64-linux"
       }
     },
-    "flake-utils_4": {
+    "disko": {
       "inputs": {
-        "systems": [
-          "stylix",
-          "systems"
+        "nixpkgs": [
+          "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1731533236,
-        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "lastModified": 1766150702,
+        "narHash": "sha256-P0kM+5o+DKnB6raXgFEk3azw8Wqg5FL6wyl9jD+G5a4=",
+        "owner": "nix-community",
+        "repo": "disko",
+        "rev": "916506443ecd0d0b4a0f4cf9d40a3c22ce39b378",
         "type": "github"
       },
       "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
+        "owner": "nix-community",
+        "repo": "disko",
         "type": "github"
       }
     },
-    "fromYaml": {
-      "flake": false,
+    "fenix": {
+      "inputs": {
+        "nixpkgs": [
+          "blink",
+          "nixpkgs"
+        ],
+        "rust-analyzer-src": "rust-analyzer-src"
+      },
       "locked": {
-        "lastModified": 1731966426,
-        "narHash": "sha256-lq95WydhbUTWig/JpqiB7oViTcHFP8Lv41IGtayokA8=",
-        "owner": "SenchoPens",
-        "repo": "fromYaml",
-        "rev": "106af9e2f715e2d828df706c386a685698f3223b",
+        "lastModified": 1761028747,
+        "narHash": "sha256-UqCbRuqnsVURCB0hLZL9SwFNDNftIE1Zxj7Ykf1aRj4=",
+        "owner": "nix-community",
+        "repo": "fenix",
+        "rev": "1dd37dd710195936f675eb0d36cf284806f99a94",
         "type": "github"
       },
       "original": {
-        "owner": "SenchoPens",
-        "repo": "fromYaml",
+        "owner": "nix-community",
+        "repo": "fenix",
         "type": "github"
       }
     },
-    "ghostty": {
+    "fff": {
       "inputs": {
-        "flake-compat": "flake-compat",
-        "nixpkgs-stable": "nixpkgs-stable",
-        "nixpkgs-unstable": "nixpkgs-unstable",
-        "zig": "zig"
+        "crane": [
+          "crane"
+        ],
+        "flake-utils": [
+          "flake-utils"
+        ],
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay_2"
       },
       "locked": {
-        "lastModified": 1735271978,
-        "narHash": "sha256-y6Ony5eq4F4E76Y2ZhALSEzBZ4GbGRVQIEScPieCDGI=",
-        "owner": "ghostty-org",
-        "repo": "ghostty",
-        "rev": "a8e5eef11cc67f87f445626f9ca2993373774bf8",
+        "lastModified": 1766121770,
+        "narHash": "sha256-ClSSOMd2ngflJQJhl9MvK8jcM6cckVDvfGQqweBNgdw=",
+        "owner": "dmtrKovalenko",
+        "repo": "fff.nvim",
+        "rev": "f6af8353c3cb02ddde1588f24f27ff8b3a4037cf",
         "type": "github"
       },
       "original": {
-        "owner": "ghostty-org",
-        "ref": "main",
-        "repo": "ghostty",
+        "owner": "dmtrKovalenko",
+        "repo": "fff.nvim",
         "type": "github"
       }
     },
-    "gitignore": {
+    "firefox-addons": {
       "inputs": {
         "nixpkgs": [
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1709087332,
-        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
-        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "dir": "pkgs/firefox-addons",
+        "lastModified": 1768144062,
+        "narHash": "sha256-LSgAmBS9JKqQG3GitIScLxoLuA9egTrZMd3+LNz895E=",
+        "owner": "connerohnesorge",
+        "repo": "nur-expressions",
+        "rev": "63e65b8a46a8e9c953d49fb6da439f59a2304480",
         "type": "github"
       },
       "original": {
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
+        "dir": "pkgs/firefox-addons",
+        "owner": "connerohnesorge",
+        "repo": "nur-expressions",
         "type": "github"
       }
     },
-    "gnome-shell": {
+    "firefox-gnome-theme": {
       "flake": false,
       "locked": {
-        "lastModified": 1732369855,
-        "narHash": "sha256-JhUWbcYPjHO3Xs3x9/Z9RuqXbcp5yhPluGjwsdE2GMg=",
-        "owner": "GNOME",
-        "repo": "gnome-shell",
-        "rev": "dadd58f630eeea41d645ee225a63f719390829dc",
+        "lastModified": 1764724327,
+        "narHash": "sha256-OkFLrD3pFR952TrjQi1+Vdj604KLcMnkpa7lkW7XskI=",
+        "owner": "rafaelmardojai",
+        "repo": "firefox-gnome-theme",
+        "rev": "66b7c635763d8e6eb86bd766de5a1e1fbfcc1047",
         "type": "github"
       },
       "original": {
-        "owner": "GNOME",
-        "ref": "47.2",
-        "repo": "gnome-shell",
+        "owner": "rafaelmardojai",
+        "repo": "firefox-gnome-theme",
         "type": "github"
       }
     },
-    "home-manager": {
-      "inputs": {
-        "nixpkgs": [
-          "nixpkgs"
-        ]
-      },
+    "flake-compat": {
+      "flake": false,
       "locked": {
-        "lastModified": 1735774425,
-        "narHash": "sha256-C73gLFnEh8ZI0uDijUgCDWCd21T6I6tsaWgIBHcfAXg=",
-        "owner": "nix-community",
-        "repo": "home-manager",
-        "rev": "5f6aa268e419d053c3d5025da740e390b12ac936",
+        "lastModified": 1747046372,
+        "narHash": "sha256-CIVLLkVgvHYbgI2UpXvIIBJ12HWgX+fjA8Xf8PUmqCY=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "9100a0f413b0c601e0533d1d94ffd501ce2e7885",
         "type": "github"
       },
       "original": {
-        "owner": "nix-community",
-        "repo": "home-manager",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "home-manager_2": {
-      "inputs": {
-        "nixpkgs": [
-          "stylix",
-          "nixpkgs"
-        ]
-      },
+    "flake-compat_2": {
+      "flake": false,
       "locked": {
-        "lastModified": 1733085484,
-        "narHash": "sha256-dVmNuUajnU18oHzBQWZm1BQtANCHaqNuxTHZQ+GN0r8=",
-        "owner": "nix-community",
-        "repo": "home-manager",
-        "rev": "c1fee8d4a60b89cae12b288ba9dbc608ff298163",
+        "lastModified": 1696426674,
+        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
         "type": "github"
       },
       "original": {
-        "owner": "nix-community",
-        "repo": "home-manager",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "homebrew-bundle": {
+    "flake-compat_3": {
       "flake": false,
       "locked": {
-        "lastModified": 1734998948,
-        "narHash": "sha256-76FZ9AWnNnSf2tyBE1KmIG/UKcKQ4bQUL6Q/ABy+STY=",
-        "owner": "Homebrew",
-        "repo": "homebrew-bundle",
-        "rev": "8c27f2668715b635cd5d85462a5f1a05de3e52b1",
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
         "type": "github"
       },
       "original": {
-        "owner": "Homebrew",
-        "repo": "homebrew-bundle",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "homebrew-cask": {
+    "flake-compat_4": {
       "flake": false,
       "locked": {
-        "lastModified": 1735142528,
-        "narHash": "sha256-vbObfsIXWtfRysEP2eskmtJDPTScHyTKlMV3E2bevbg=",
-        "owner": "Homebrew",
-        "repo": "homebrew-cask",
-        "rev": "35062b9f09da83f4c4edeef16887e944ac2ea99e",
+        "lastModified": 1761588595,
+        "narHash": "sha256-XKUZz9zewJNUj46b4AJdiRZJAvSZ0Dqj2BNfXvFlJC4=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "f387cd2afec9419c8ee37694406ca490c3f34ee5",
         "type": "github"
       },
       "original": {
-        "owner": "Homebrew",
-        "repo": "homebrew-cask",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "homebrew-core": {
+    "flake-compat_5": {
       "flake": false,
       "locked": {
-        "lastModified": 1735138306,
-        "narHash": "sha256-fjoYxcyPibPCMbFDYLE+geMnI/IVvLzUxfekpNnaKH0=",
-        "owner": "Homebrew",
-        "repo": "homebrew-core",
-        "rev": "2d27cd0fbd62147ce5ca9461d1e2f4e5d0df9925",
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "NixOS",
+        "repo": "flake-compat",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
         "type": "github"
       },
       "original": {
-        "owner": "Homebrew",
-        "repo": "homebrew-core",
+        "owner": "NixOS",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "hyprutils": {
-      "inputs": {
-        "nixpkgs": [
-          "hyprwm-qtutils",
-          "nixpkgs"
-        ],
-        "systems": [
-          "hyprwm-qtutils",
-          "systems"
-        ]
-      },
+    "flake-compat_6": {
+      "flake": false,
       "locked": {
-        "lastModified": 1734796073,
-        "narHash": "sha256-TnuKsa8OHrSJEmHm3TLGOWbPNA1gRjmZLsRzKrCqOsg=",
-        "owner": "hyprwm",
-        "repo": "hyprutils",
-        "rev": "c3331116ebd0b71df5ae8c6efe9a7f94148b03bf",
+        "lastModified": 1765121682,
+        "narHash": "sha256-4VBOP18BFeiPkyhy9o4ssBNQEvfvv1kXkasAYd0+rrA=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "65f23138d8d09a92e30f1e5c87611b23ef451bf3",
         "type": "github"
       },
       "original": {
-        "owner": "hyprwm",
-        "repo": "hyprutils",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
-    "hyprwm-qtutils": {
+    "flake-fmt": {
       "inputs": {
-        "hyprutils": "hyprutils",
-        "nixpkgs": [
-          "nixpkgs"
-        ],
-        "systems": "systems_2"
+        "nixpkgs": "nixpkgs_11"
       },
       "locked": {
-        "lastModified": 1734906472,
-        "narHash": "sha256-pWPRv/GA/X/iAwoE6gMNUqn/ZeJX1IeLPRpZI0tTPK0=",
-        "owner": "hyprwm",
-        "repo": "hyprland-qtutils",
-        "rev": "c77109d7e1ddbcdb87cafd32ce411f76328ae152",
+        "lastModified": 1767005043,
+        "narHash": "sha256-qAf0gop1s4NjZhL/e78o8FX8go92v+NA20cCg+3KQ+0=",
+        "owner": "Mic92",
+        "repo": "flake-fmt",
+        "rev": "df8d53c329c0a57e74910d2b6f0259c07f2e2531",
         "type": "github"
       },
       "original": {
-        "owner": "hyprwm",
-        "repo": "hyprland-qtutils",
+        "owner": "Mic92",
+        "repo": "flake-fmt",
+        "type": "github"
+      }
+    },
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1733312601,
+        "narHash": "sha256-4pDvzqnegAfRkPwO3wmwBhVi/Sye1mzps0zHWYnP88c=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "205b12d8b7cd4802fbcb8e8ef6a0f1408781a4f9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "flake-parts_2": {
+      "inputs": {
+        "nixpkgs-lib": [
+          "determinate",
+          "nix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1748821116,
+        "narHash": "sha256-F82+gS044J1APL0n4hH50GYdPRv/5JWm34oCJYmVKdE=",
+        "rev": "49f0870db23e8c1ca0b5259734a02cd9e1e371a1",
+        "revCount": 377,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/hercules-ci/flake-parts/0.1.377%2Brev-49f0870db23e8c1ca0b5259734a02cd9e1e371a1/01972f28-554a-73f8-91f4-d488cc502f08/source.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/hercules-ci/flake-parts/0.1"
+      }
+    },
+    "flake-parts_3": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib_3"
+      },
+      "locked": {
+        "lastModified": 1767609335,
+        "narHash": "sha256-feveD98mQpptwrAEggBQKJTYbvwwglSbOv53uCfH9PY=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "250481aafeb741edfe23d29195671c19b36b6dca",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "flake-parts_4": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib_4"
+      },
+      "locked": {
+        "lastModified": 1767609335,
+        "narHash": "sha256-feveD98mQpptwrAEggBQKJTYbvwwglSbOv53uCfH9PY=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "250481aafeb741edfe23d29195671c19b36b6dca",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "flake-parts_5": {
+      "inputs": {
+        "nixpkgs-lib": [
+          "nordvpn",
+          "hercules-ci-effects",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754487366,
+        "narHash": "sha256-pHYj8gUBapuUzKV/kN/tR3Zvqc7o6gdFB9XKXIp1SQ8=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "af66ad14b28a127c5c0f3bbb298218fc63528a18",
+        "type": "github"
+      },
+      "original": {
+        "id": "flake-parts",
+        "type": "indirect"
+      }
+    },
+    "flake-parts_6": {
+      "inputs": {
+        "nixpkgs-lib": [
+          "stylix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1763759067,
+        "narHash": "sha256-LlLt2Jo/gMNYAwOgdRQBrsRoOz7BPRkzvNaI/fzXi2Q=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "2cccadc7357c0ba201788ae99c4dfa90728ef5e0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_2": {
+      "inputs": {
+        "systems": "systems_2"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_3": {
+      "inputs": {
+        "systems": "systems_4"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_4": {
+      "inputs": {
+        "systems": "systems_7"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_5": {
+      "inputs": {
+        "systems": "systems_8"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_6": {
+      "inputs": {
+        "systems": "systems_9"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_7": {
+      "inputs": {
+        "systems": "systems_10"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flakeUtils": {
+      "inputs": {
+        "systems": "systems_6"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "fromYaml": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1731966426,
+        "narHash": "sha256-lq95WydhbUTWig/JpqiB7oViTcHFP8Lv41IGtayokA8=",
+        "owner": "SenchoPens",
+        "repo": "fromYaml",
+        "rev": "106af9e2f715e2d828df706c386a685698f3223b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "SenchoPens",
+        "repo": "fromYaml",
+        "type": "github"
+      }
+    },
+    "ghostty": {
+      "inputs": {
+        "flake-compat": "flake-compat_4",
+        "flake-utils": [
+          "flake-utils"
+        ],
+        "home-manager": "home-manager",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "zig": "zig",
+        "zon2nix": "zon2nix"
+      },
+      "locked": {
+        "lastModified": 1767821852,
+        "narHash": "sha256-CHjTyd/3ZnletnYcoZfC8wnRqzbZEwkilyx23/swlv8=",
+        "owner": "ghostty-org",
+        "repo": "ghostty",
+        "rev": "891f442041f3c767c1c851fb46c1877fe64e6406",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ghostty-org",
+        "ref": "main",
+        "repo": "ghostty",
+        "type": "github"
+      }
+    },
+    "git-hooks-nix": {
+      "inputs": {
+        "flake-compat": "flake-compat_2",
+        "gitignore": [
+          "determinate",
+          "nix"
+        ],
+        "nixpkgs": [
+          "determinate",
+          "nix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1747372754,
+        "narHash": "sha256-2Y53NGIX2vxfie1rOW0Qb86vjRZ7ngizoo+bnXU9D9k=",
+        "rev": "80479b6ec16fefd9c1db3ea13aeb038c60530f46",
+        "revCount": 1026,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/cachix/git-hooks.nix/0.1.1026%2Brev-80479b6ec16fefd9c1db3ea13aeb038c60530f46/0196d79a-1b35-7b8e-a021-c894fb62163d/source.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/cachix/git-hooks.nix/0.1.941"
+      }
+    },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "denix",
+          "pre-commit-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "gitignore_2": {
+      "inputs": {
+        "nixpkgs": [
+          "hyprland",
+          "pre-commit-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "gnome-shell": {
+      "flake": false,
+      "locked": {
+        "host": "gitlab.gnome.org",
+        "lastModified": 1764524476,
+        "narHash": "sha256-bTmNn3Q4tMQ0J/P0O5BfTQwqEnCiQIzOGef9/aqAZvk=",
+        "owner": "GNOME",
+        "repo": "gnome-shell",
+        "rev": "c0e1ad9f0f703fd0519033b8f46c3267aab51a22",
+        "type": "gitlab"
+      },
+      "original": {
+        "host": "gitlab.gnome.org",
+        "owner": "GNOME",
+        "ref": "gnome-49",
+        "repo": "gnome-shell",
+        "type": "gitlab"
+      }
+    },
+    "hercules-ci-effects": {
+      "inputs": {
+        "flake-parts": "flake-parts_5",
+        "nixpkgs": "nixpkgs_8"
+      },
+      "locked": {
+        "lastModified": 1758022363,
+        "narHash": "sha256-ENUhCRWgSX4ni751HieNuQoq06dJvApV/Nm89kh+/A0=",
+        "owner": "hercules-ci",
+        "repo": "hercules-ci-effects",
+        "rev": "1a3667d33e247ad35ca250698d63f49a5453d824",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "hercules-ci-effects",
+        "type": "github"
+      }
+    },
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "ghostty",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1755776884,
+        "narHash": "sha256-CPM7zm6csUx7vSfKvzMDIjepEJv1u/usmaT7zydzbuI=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "4fb695d10890e9fc6a19deadf85ff79ffb78da86",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-25.05",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767824564,
+        "narHash": "sha256-DRhbz2dZaEmj5MgLFMXjEPfmKYfMG6LwNT9Bv8zeLPQ=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "4fee4bd14b5e4178855ad0041df89fa44f3f2bea",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "master",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "home-manager_3": {
+      "inputs": {
+        "nixpkgs": [
+          "nix-version-search",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753592768,
+        "narHash": "sha256-oV695RvbAE4+R9pcsT9shmp6zE/+IZe6evHWX63f2Qg=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "fc3add429f21450359369af74c2375cb34a2d204",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-25.05",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "hyprcursor": {
+      "inputs": {
+        "hyprlang": [
+          "hyprland",
+          "hyprlang"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753964049,
+        "narHash": "sha256-lIqabfBY7z/OANxHoPeIrDJrFyYy9jAM4GQLzZ2feCM=",
+        "owner": "hyprwm",
+        "repo": "hyprcursor",
+        "rev": "44e91d467bdad8dcf8bbd2ac7cf49972540980a5",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprcursor",
+        "type": "github"
+      }
+    },
+    "hyprgraphics": {
+      "inputs": {
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1766946335,
+        "narHash": "sha256-MRD+Jr2bY11MzNDfenENhiK6pvN+nHygxdHoHbZ1HtE=",
+        "owner": "hyprwm",
+        "repo": "hyprgraphics",
+        "rev": "4af02a3925b454deb1c36603843da528b67ded6c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprgraphics",
+        "type": "github"
+      }
+    },
+    "hyprland": {
+      "inputs": {
+        "aquamarine": "aquamarine",
+        "hyprcursor": "hyprcursor",
+        "hyprgraphics": "hyprgraphics",
+        "hyprland-guiutils": "hyprland-guiutils",
+        "hyprland-protocols": "hyprland-protocols",
+        "hyprlang": "hyprlang",
+        "hyprutils": "hyprutils",
+        "hyprwayland-scanner": "hyprwayland-scanner",
+        "hyprwire": "hyprwire",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "pre-commit-hooks": "pre-commit-hooks_2",
+        "systems": "systems_3",
+        "xdph": "xdph"
+      },
+      "locked": {
+        "lastModified": 1767812022,
+        "narHash": "sha256-BHBiQhlNl+Lxvp/bBOOTWhxbXYMoVG4xiyv9DE/nuZ4=",
+        "owner": "hyprwm",
+        "repo": "hyprland",
+        "rev": "918e2bb9be0e1d233f9394f1d569137788c43c01",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprland",
+        "type": "github"
+      }
+    },
+    "hyprland-guiutils": {
+      "inputs": {
+        "aquamarine": [
+          "hyprland",
+          "aquamarine"
+        ],
+        "hyprgraphics": [
+          "hyprland",
+          "hyprgraphics"
+        ],
+        "hyprlang": [
+          "hyprland",
+          "hyprlang"
+        ],
+        "hyprtoolkit": "hyprtoolkit",
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "hyprwayland-scanner": [
+          "hyprland",
+          "hyprwayland-scanner"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767023960,
+        "narHash": "sha256-R2HgtVS1G3KSIKAQ77aOZ+Q0HituOmPgXW9nBNkpp3Q=",
+        "owner": "hyprwm",
+        "repo": "hyprland-guiutils",
+        "rev": "c2e906261142f5dd1ee0bfc44abba23e2754c660",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprland-guiutils",
+        "type": "github"
+      }
+    },
+    "hyprland-protocols": {
+      "inputs": {
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765214753,
+        "narHash": "sha256-P9zdGXOzToJJgu5sVjv7oeOGPIIwrd9hAUAP3PsmBBs=",
+        "owner": "hyprwm",
+        "repo": "hyprland-protocols",
+        "rev": "3f3860b869014c00e8b9e0528c7b4ddc335c21ab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprland-protocols",
+        "type": "github"
+      }
+    },
+    "hyprlang": {
+      "inputs": {
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1764612430,
+        "narHash": "sha256-54ltTSbI6W+qYGMchAgCR6QnC1kOdKXN6X6pJhOWxFg=",
+        "owner": "hyprwm",
+        "repo": "hyprlang",
+        "rev": "0d00dc118981531aa731150b6ea551ef037acddd",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprlang",
+        "type": "github"
+      }
+    },
+    "hyprtoolkit": {
+      "inputs": {
+        "aquamarine": [
+          "hyprland",
+          "hyprland-guiutils",
+          "aquamarine"
+        ],
+        "hyprgraphics": [
+          "hyprland",
+          "hyprland-guiutils",
+          "hyprgraphics"
+        ],
+        "hyprlang": [
+          "hyprland",
+          "hyprland-guiutils",
+          "hyprlang"
+        ],
+        "hyprutils": [
+          "hyprland",
+          "hyprland-guiutils",
+          "hyprutils"
+        ],
+        "hyprwayland-scanner": [
+          "hyprland",
+          "hyprland-guiutils",
+          "hyprwayland-scanner"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "hyprland-guiutils",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "hyprland-guiutils",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1764592794,
+        "narHash": "sha256-7CcO+wbTJ1L1NBQHierHzheQGPWwkIQug/w+fhTAVuU=",
+        "owner": "hyprwm",
+        "repo": "hyprtoolkit",
+        "rev": "5cfe0743f0e608e1462972303778d8a0859ee63e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprtoolkit",
+        "type": "github"
+      }
+    },
+    "hyprutils": {
+      "inputs": {
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1766253372,
+        "narHash": "sha256-1+p4Kw8HdtMoFSmJtfdwjxM4bPxDK9yg27SlvUMpzWA=",
+        "owner": "hyprwm",
+        "repo": "hyprutils",
+        "rev": "51a4f93ce8572e7b12b7284eb9e6e8ebf16b4be9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprutils",
+        "type": "github"
+      }
+    },
+    "hyprwayland-scanner": {
+      "inputs": {
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1763640274,
+        "narHash": "sha256-Uan1Nl9i4TF/kyFoHnTq1bd/rsWh4GAK/9/jDqLbY5A=",
+        "owner": "hyprwm",
+        "repo": "hyprwayland-scanner",
+        "rev": "f6cf414ca0e16a4d30198fd670ec86df3c89f671",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprwayland-scanner",
+        "type": "github"
+      }
+    },
+    "hyprwire": {
+      "inputs": {
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767473322,
+        "narHash": "sha256-RGOeG+wQHeJ6BKcsSB8r0ZU77g9mDvoQzoTKj2dFHwA=",
+        "owner": "hyprwm",
+        "repo": "hyprwire",
+        "rev": "d5e7d6b49fe780353c1cf9a1cf39fa8970bd9d11",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprwire",
+        "type": "github"
+      }
+    },
+    "kiro-flake": {
+      "inputs": {
+        "flake-utils": "flake-utils_3",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "treefmt-nix": "treefmt-nix_2"
+      },
+      "locked": {
+        "lastModified": 1763672406,
+        "narHash": "sha256-4C6AlGiM8HF5Uyhj48xshRjAHdv417pD8CXO+JdzyMY=",
+        "owner": "connerohnesorge",
+        "repo": "kiro-flake",
+        "rev": "4f064c681ece75f32d63c53a8cb695a1b1b94781",
+        "type": "github"
+      },
+      "original": {
+        "owner": "connerohnesorge",
+        "repo": "kiro-flake",
+        "type": "github"
+      }
+    },
+    "libSource": {
+      "locked": {
+        "lastModified": 1754184128,
+        "narHash": "sha256-AjhoyBL4eSyXf01Bmc6DiuaMrJRNdWopmdnMY0Pa/M0=",
+        "owner": "divnix",
+        "repo": "nixpkgs.lib",
+        "rev": "02e72200e6d56494f4a7c0da8118760736e41b60",
+        "type": "github"
+      },
+      "original": {
+        "owner": "divnix",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "libSource_2": {
+      "locked": {
+        "lastModified": 1753579242,
+        "narHash": "sha256-zvaMGVn14/Zz8hnp4VWT9xVnhc8vuL3TStRqwk22biA=",
+        "owner": "divnix",
+        "repo": "nixpkgs.lib",
+        "rev": "0f36c44e01a6129be94e3ade315a5883f0228a6e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "divnix",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nix": {
+      "inputs": {
+        "flake-parts": "flake-parts_2",
+        "git-hooks-nix": "git-hooks-nix",
+        "nixpkgs": "nixpkgs_3",
+        "nixpkgs-23-11": "nixpkgs-23-11",
+        "nixpkgs-regression": "nixpkgs-regression"
+      },
+      "locked": {
+        "lastModified": 1766546676,
+        "narHash": "sha256-GsC52VFF9Gi2pgP/haQyPdQoF5Qe2myk1tsPcuJZI28=",
+        "rev": "51dacdd248e8071cd0243a8245c8c42ac1f33307",
+        "revCount": 24299,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/DeterminateSystems/nix-src/3.15.1/019b4e84-d036-75db-b6c6-6bc2e2035c53/source.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/DeterminateSystems/nix-src/%2A"
+      }
+    },
+    "nix-ai-tools": {
+      "inputs": {
+        "blueprint": "blueprint",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "treefmt-nix": [
+          "treefmt-nix"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767821684,
+        "narHash": "sha256-LzNvTxX3Rdvdk1D64vWtA1MMm0w7da6VXBcOx+Ln2/Y=",
+        "owner": "numtide",
+        "repo": "llm-agents.nix",
+        "rev": "9ffa06f17e1502bf7b5de4db6267d592b0e4dcb0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "llm-agents.nix",
+        "type": "github"
+      }
+    },
+    "nix-auth": {
+      "inputs": {
+        "flake-parts": "flake-parts_4",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "treefmt-nix": "treefmt-nix_3"
+      },
+      "locked": {
+        "lastModified": 1767754445,
+        "narHash": "sha256-OR3yrvEjptw4Zvii/2N9OHcjzlwNASW5w5hsgO+e24g=",
+        "owner": "numtide",
+        "repo": "nix-auth",
+        "rev": "ce99bd2e995b0e94f13368ed61f88120374bbaa2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "nix-auth",
         "type": "github"
       }
     },
     "nix-darwin": {
       "inputs": {
-        "nixpkgs": "nixpkgs"
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1767718503,
+        "narHash": "sha256-V+VkFs0aSG0ca8p/N3gib7FAf4cq9jyr5Gm+ZBrHQpo=",
+        "owner": "nix-darwin",
+        "repo": "nix-darwin",
+        "rev": "9f48ffaca1f44b3e590976b4da8666a9e86e6eb1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-darwin",
+        "ref": "master",
+        "repo": "nix-darwin",
+        "type": "github"
+      }
+    },
+    "nix-index-database": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765267181,
+        "narHash": "sha256-d3NBA9zEtBu2JFMnTBqWj7Tmi7R5OikoU2ycrdhQEws=",
+        "owner": "nix-community",
+        "repo": "nix-index-database",
+        "rev": "82befcf7dc77c909b0f2a09f5da910ec95c5b78f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nix-index-database",
+        "type": "github"
+      }
+    },
+    "nix-ld": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1766997865,
+        "narHash": "sha256-pcmoWAlf/CSDFNptUAYKG3k8FwGNYSJBDF6li9+y+cI=",
+        "owner": "Mic92",
+        "repo": "nix-ld",
+        "rev": "f388fe13b4370336982c53916744028465fbfc81",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Mic92",
+        "repo": "nix-ld",
+        "type": "github"
+      }
+    },
+    "nix-version-search": {
+      "inputs": {
+        "flakeUtils": "flakeUtils",
+        "home-manager": "home-manager_3",
+        "libSource": "libSource",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "xome": "xome"
+      },
+      "locked": {
+        "lastModified": 1761578212,
+        "narHash": "sha256-M5b+YI7l6HKUfDJArH561XSn/zKsRyu6ekXy8KiIXtY=",
+        "owner": "jeff-hykin",
+        "repo": "nix_version_search_cli",
+        "rev": "8053f87f566c1a4d61cfb53436eafd0331918902",
+        "type": "github"
+      },
+      "original": {
+        "owner": "jeff-hykin",
+        "repo": "nix_version_search_cli",
+        "type": "github"
+      }
+    },
+    "nixos-hardware": {
+      "locked": {
+        "lastModified": 1767185284,
+        "narHash": "sha256-ljDBUDpD1Cg5n3mJI81Hz5qeZAwCGxon4kQW3Ho3+6Q=",
+        "owner": "NixOS",
+        "repo": "nixos-hardware",
+        "rev": "40b1a28dce561bea34858287fbb23052c3ee63fe",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "master",
+        "repo": "nixos-hardware",
+        "type": "github"
+      }
+    },
+    "nixos-wsl": {
+      "inputs": {
+        "flake-compat": "flake-compat_6",
+        "nixpkgs": "nixpkgs_6"
+      },
+      "locked": {
+        "lastModified": 1765841014,
+        "narHash": "sha256-55V0AJ36V5Egh4kMhWtDh117eE3GOjwq5LhwxDn9eHg=",
+        "owner": "nix-community",
+        "repo": "NixOS-WSL",
+        "rev": "be4af8042e7a61fa12fda58fe9a3b3babdefe17b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "main",
+        "repo": "NixOS-WSL",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1744536153,
+        "narHash": "sha256-awS2zRgF4uTwrOKwwiJcByDzDOdo3Q1rPZbiHQg/N38=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "18dd725c29603f582cf1900e0d25f9f1063dbf11",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-23-11": {
+      "locked": {
+        "lastModified": 1717159533,
+        "narHash": "sha256-oamiKNfr2MS6yH64rUn99mIZjc45nGJlj9eGth/3Xuw=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1733096140,
+        "narHash": "sha256-1qRH7uAUsyQI7R1Uwl4T+XvdNv778H0Nb5njNrqvylY=",
+        "type": "tarball",
+        "url": "https://github.com/NixOS/nixpkgs/archive/5487e69da40cbd611ab2cadee0b4637225f7cfae.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://github.com/NixOS/nixpkgs/archive/5487e69da40cbd611ab2cadee0b4637225f7cfae.tar.gz"
+      }
+    },
+    "nixpkgs-lib_2": {
+      "locked": {
+        "lastModified": 1754184128,
+        "narHash": "sha256-AjhoyBL4eSyXf01Bmc6DiuaMrJRNdWopmdnMY0Pa/M0=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "02e72200e6d56494f4a7c0da8118760736e41b60",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib_3": {
+      "locked": {
+        "lastModified": 1765674936,
+        "narHash": "sha256-k00uTP4JNfmejrCLJOwdObYC9jHRrr/5M/a/8L2EIdo=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "2075416fcb47225d9b68ac469a5c4801a9c4dd85",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib_4": {
+      "locked": {
+        "lastModified": 1765674936,
+        "narHash": "sha256-k00uTP4JNfmejrCLJOwdObYC9jHRrr/5M/a/8L2EIdo=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "2075416fcb47225d9b68ac469a5c4801a9c4dd85",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nixpkgs-regression": {
+      "locked": {
+        "lastModified": 1643052045,
+        "narHash": "sha256-uGJ0VXIhWKGXxkeNnq4TvV3CIOkUJ3PAoLZ3HMzNVMw=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
+        "type": "github"
+      }
+    },
+    "nixpkgs_10": {
+      "locked": {
+        "lastModified": 1747958103,
+        "narHash": "sha256-qmmFCrfBwSHoWw7cVK4Aj+fns+c54EBP8cGqp/yK410=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "fe51d34885f7b5e3e7b59572796e1bcb427eccb1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_11": {
+      "locked": {
+        "lastModified": 1766840161,
+        "narHash": "sha256-Ss/LHpJJsng8vz1Pe33RSGIWUOcqM1fjrehjUkdrWio=",
+        "ref": "nixpkgs-unstable",
+        "rev": "3edc4a30ed3903fdf6f90c837f961fa6b49582d1",
+        "shallow": true,
+        "type": "git",
+        "url": "https://github.com/NixOS/nixpkgs"
+      },
+      "original": {
+        "ref": "nixpkgs-unstable",
+        "shallow": true,
+        "type": "git",
+        "url": "https://github.com/NixOS/nixpkgs"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1754340878,
+        "narHash": "sha256-lgmUyVQL9tSnvvIvBp7x1euhkkCho7n3TMzgjdvgPoU=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "cab778239e705082fe97bb4990e0d24c50924c04",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_3": {
+      "locked": {
+        "lastModified": 1761597516,
+        "narHash": "sha256-wxX7u6D2rpkJLWkZ2E932SIvDJW8+ON/0Yy8+a5vsDU=",
+        "rev": "daf6dc47aa4b44791372d6139ab7b25269184d55",
+        "revCount": 811874,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/NixOS/nixpkgs/0.2505.811874%2Brev-daf6dc47aa4b44791372d6139ab7b25269184d55/019a3494-3498-707e-9086-1fb81badc7fe/source.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/NixOS/nixpkgs/0.2505"
+      }
+    },
+    "nixpkgs_4": {
+      "locked": {
+        "lastModified": 1766314097,
+        "narHash": "sha256-laJftWbghBehazn/zxVJ8NdENVgjccsWAdAqKXhErrM=",
+        "rev": "306ea70f9eb0fb4e040f8540e2deab32ed7e2055",
+        "revCount": 914780,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/DeterminateSystems/nixpkgs-weekly/0.1.914780%2Brev-306ea70f9eb0fb4e040f8540e2deab32ed7e2055/019b49b8-ed0f-724e-bdaf-5fd90cc1c590/source.tar.gz"
       },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/DeterminateSystems/nixpkgs-weekly/0.1"
+      }
+    },
+    "nixpkgs_5": {
       "locked": {
-        "lastModified": 1716329735,
-        "narHash": "sha256-ap51w+VqG21vuzyQ04WrhI2YbWHd3UGz0e7dc/QQmoA=",
-        "owner": "LnL7",
-        "repo": "nix-darwin",
-        "rev": "eac4f25028c1975a939c8f8fba95c12f8a25e01c",
+        "lastModified": 1767364772,
+        "narHash": "sha256-fFUnEYMla8b7UKjijLnMe+oVFOz6HjijGGNS1l7dYaQ=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "16c7794d0a28b5a37904d55bcca36003b9109aaa",
         "type": "github"
       },
       "original": {
-        "owner": "LnL7",
-        "repo": "nix-darwin",
+        "owner": "nixos",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_6": {
+      "locked": {
+        "lastModified": 1765472234,
+        "narHash": "sha256-9VvC20PJPsleGMewwcWYKGzDIyjckEz8uWmT0vCDYK0=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "2fbfb1d73d239d2402a8fe03963e37aab15abe8b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_7": {
+      "locked": {
+        "lastModified": 1767767207,
+        "narHash": "sha256-Mj3d3PfwltLmukFal5i3fFt27L6NiKXdBezC1EBuZs4=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "5912c1772a44e31bf1c63c0390b90501e5026886",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_8": {
+      "locked": {
+        "lastModified": 1755027561,
+        "narHash": "sha256-IVft239Bc8p8Dtvf7UAACMG5P3ZV+3/aO28gXpGtMXI=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "005433b926e16227259a1843015b5b2b7f7d1fc3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
         "type": "github"
       }
     },
-    "nix-homebrew": {
+    "nixpkgs_9": {
+      "locked": {
+        "lastModified": 1744536153,
+        "narHash": "sha256-awS2zRgF4uTwrOKwwiJcByDzDOdo3Q1rPZbiHQg/N38=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "18dd725c29603f582cf1900e0d25f9f1063dbf11",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nordvpn": {
       "inputs": {
-        "brew-src": "brew-src",
-        "flake-utils": "flake-utils_2",
-        "nix-darwin": "nix-darwin",
-        "nixpkgs": "nixpkgs_2"
+        "flake-utils": "flake-utils_5",
+        "hercules-ci-effects": "hercules-ci-effects",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "nordvpn-amd64-deb": "nordvpn-amd64-deb",
+        "nordvpn-arm64-deb": "nordvpn-arm64-deb"
       },
       "locked": {
-        "lastModified": 1732145543,
-        "narHash": "sha256-VRQh/lvCSko9YV7haXyPt7DSp+EkgjjBv/9U4cY9c50=",
-        "owner": "zhaofengli-wip",
-        "repo": "nix-homebrew",
-        "rev": "ac3945ee614f69ab89c6935b3f0567028de5f012",
+        "lastModified": 1764175314,
+        "narHash": "sha256-fe3+VYJb5poUyrlyLe9GCgTggkxPo/JvXZ4EGroIY10=",
+        "owner": "connerohnesorge",
+        "repo": "nordvpn-flake",
+        "rev": "97d3e39957c207af6b732f2b290763404041f36e",
         "type": "github"
       },
       "original": {
-        "owner": "zhaofengli-wip",
-        "repo": "nix-homebrew",
+        "owner": "connerohnesorge",
+        "repo": "nordvpn-flake",
         "type": "github"
       }
     },
-    "nix-ld": {
+    "nordvpn-amd64-deb": {
+      "flake": false,
+      "locked": {
+        "narHash": "sha256-AfVDD/9ASErvgcG590/O+l7jeIeAv+PQkOvkRX8wC7I=",
+        "type": "file",
+        "url": "https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/n/nordvpn/nordvpn_4.2.0_amd64.deb"
+      },
+      "original": {
+        "type": "file",
+        "url": "https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/n/nordvpn/nordvpn_4.2.0_amd64.deb"
+      }
+    },
+    "nordvpn-arm64-deb": {
+      "flake": false,
+      "locked": {
+        "narHash": "sha256-YweSq0QV+rMNWvvWw6RN0XbsvGeZVIUlJo3z+l+f79w=",
+        "type": "file",
+        "url": "https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/n/nordvpn/nordvpn_4.2.0_arm64.deb"
+      },
+      "original": {
+        "type": "file",
+        "url": "https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/n/nordvpn/nordvpn_4.2.0_arm64.deb"
+      }
+    },
+    "nur": {
       "inputs": {
+        "flake-parts": [
+          "stylix",
+          "flake-parts"
+        ],
         "nixpkgs": [
+          "stylix",
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1734943676,
-        "narHash": "sha256-j82D0J4XkteyE/nJ+Wn+9eSdnM5RXz+1vWR3XvRN7nY=",
-        "owner": "Mic92",
-        "repo": "nix-ld",
-        "rev": "76cbe0384ce6be86cba9310f617ad3abecc7f67b",
+        "lastModified": 1764773531,
+        "narHash": "sha256-mCBl7MD1WZ7yCG6bR9MmpPO2VydpNkWFgnslJRIT1YU=",
+        "owner": "nix-community",
+        "repo": "NUR",
+        "rev": "1d9616689e98beded059ad0384b9951e967a17fa",
         "type": "github"
       },
       "original": {
-        "owner": "Mic92",
-        "repo": "nix-ld",
+        "owner": "nix-community",
+        "repo": "NUR",
         "type": "github"
       }
     },
-    "nixos-hardware": {
+    "ovim": {
+      "inputs": {
+        "crane": "crane_2",
+        "flake-utils": "flake-utils_6",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay_3",
+        "treefmt-nix": "treefmt-nix_4"
+      },
       "locked": {
-        "lastModified": 1734954597,
-        "narHash": "sha256-QIhd8/0x30gEv8XEE1iAnrdMlKuQ0EzthfDR7Hwl+fk=",
-        "owner": "NixOS",
-        "repo": "nixos-hardware",
-        "rev": "def1d472c832d77885f174089b0d34854b007198",
+        "lastModified": 1767033205,
+        "narHash": "sha256-UWyd3Zf061s71w1ecVoocNL/wTxBsz+QcW9QPP/oThQ=",
+        "owner": "connerohnesorge",
+        "repo": "ovim",
+        "rev": "2cad976dc4b5b7ae59726053d2b0b67b2b655ec2",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "master",
-        "repo": "nixos-hardware",
+        "owner": "connerohnesorge",
+        "ref": "2cad976dc4b5b7ae59726053d2b0b67b2b655ec2",
+        "repo": "ovim",
         "type": "github"
       }
     },
-    "nixpkgs": {
+    "pre-commit-hooks": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "gitignore": "gitignore",
+        "nixpkgs": "nixpkgs_2"
+      },
       "locked": {
-        "lastModified": 1687274257,
-        "narHash": "sha256-TutzPriQcZ8FghDhEolnHcYU2oHIG5XWF+/SUBNnAOE=",
-        "path": "/nix/store/22qgs3skscd9bmrxv9xv4q5d4wwm5ppx-source",
-        "rev": "2c9ecd1f0400076a4d6b2193ad468ff0a7e7fdc5",
-        "type": "path"
+        "lastModified": 1754416808,
+        "narHash": "sha256-c6yg0EQ9xVESx6HGDOCMcyRSjaTpNJP10ef+6fRcofA=",
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "rev": "9c52372878df6911f9afc1e2a1391f55e4dfc864",
+        "type": "github"
       },
       "original": {
-        "id": "nixpkgs",
-        "type": "indirect"
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "type": "github"
       }
     },
-    "nixpkgs-stable": {
+    "pre-commit-hooks_2": {
+      "inputs": {
+        "flake-compat": "flake-compat_5",
+        "gitignore": "gitignore_2",
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ]
+      },
       "locked": {
-        "lastModified": 1733423277,
-        "narHash": "sha256-TxabjxEgkNbCGFRHgM/b9yZWlBj60gUOUnRT/wbVQR8=",
-        "owner": "nixos",
-        "repo": "nixpkgs",
-        "rev": "e36963a147267afc055f7cf65225958633e536bf",
+        "lastModified": 1767281941,
+        "narHash": "sha256-6MkqajPICgugsuZ92OMoQcgSHnD6sJHwk8AxvMcIgTE=",
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "rev": "f0927703b7b1c8d97511c4116eb9b4ec6645a0fa",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
-        "ref": "release-24.11",
-        "repo": "nixpkgs",
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
         "type": "github"
       }
     },
-    "nixpkgs-unstable": {
+    "proton-authenticator": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "treefmt-nix": "treefmt-nix_5"
+      },
       "locked": {
-        "lastModified": 1733229606,
-        "narHash": "sha256-FLYY5M0rpa5C2QAE3CKLYAM6TwbKicdRK6qNrSHlNrE=",
-        "owner": "nixos",
-        "repo": "nixpkgs",
-        "rev": "566e53c2ad750c84f6d31f9ccb9d00f823165550",
+        "lastModified": 1759777504,
+        "narHash": "sha256-KY7OLcZIEp2J4gcQcMvLlqjl9Tn5ddYpDW1itaDx+Bc=",
+        "owner": "connerohnesorge",
+        "repo": "proton-authenticator-flake",
+        "rev": "0494e1b70724861b4f8e2fb314b744e0591dfbb5",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
-        "ref": "nixpkgs-unstable",
-        "repo": "nixpkgs",
+        "owner": "connerohnesorge",
+        "ref": "0494e1b70724861b4f8e2fb314b744e0591dfbb5",
+        "repo": "proton-authenticator-flake",
         "type": "github"
       }
     },
-    "nixpkgs-unstable_2": {
+    "root": {
+      "inputs": {
+        "blink": "blink",
+        "conclaude": "conclaude",
+        "crane": "crane",
+        "denix": "denix",
+        "determinate": "determinate",
+        "disko": "disko",
+        "fff": "fff",
+        "firefox-addons": "firefox-addons",
+        "flake-compat": "flake-compat_3",
+        "flake-parts": "flake-parts_3",
+        "flake-utils": "flake-utils_2",
+        "ghostty": "ghostty",
+        "home-manager": "home-manager_2",
+        "hyprland": "hyprland",
+        "kiro-flake": "kiro-flake",
+        "nix-ai-tools": "nix-ai-tools",
+        "nix-auth": "nix-auth",
+        "nix-darwin": "nix-darwin",
+        "nix-index-database": "nix-index-database",
+        "nix-ld": "nix-ld",
+        "nix-version-search": "nix-version-search",
+        "nixos-hardware": "nixos-hardware",
+        "nixos-wsl": "nixos-wsl",
+        "nixpkgs": "nixpkgs_7",
+        "nordvpn": "nordvpn",
+        "ovim": "ovim",
+        "proton-authenticator": "proton-authenticator",
+        "sops": "sops",
+        "spectr": "spectr",
+        "stylix": "stylix",
+        "systems": "systems_11",
+        "treefmt-nix": "treefmt-nix_7",
+        "zen-browser": "zen-browser"
+      }
+    },
+    "rust-analyzer-src": {
+      "flake": false,
       "locked": {
-        "lastModified": 1734649271,
-        "narHash": "sha256-4EVBRhOjMDuGtMaofAIqzJbg4Ql7Ai0PSeuVZTHjyKQ=",
-        "owner": "nixos",
-        "repo": "nixpkgs",
-        "rev": "d70bd19e0a38ad4790d3913bf08fcbfc9eeca507",
+        "lastModified": 1760976639,
+        "narHash": "sha256-v+teOfOLbR9UFLuaMfbsd/L5ckJBcQJyeFj23V3lz8g=",
+        "owner": "rust-lang",
+        "repo": "rust-analyzer",
+        "rev": "4a305f565ab964caf22dc72980a44b2970a9c2f1",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
-        "ref": "nixos-unstable",
-        "repo": "nixpkgs",
+        "owner": "rust-lang",
+        "ref": "nightly",
+        "repo": "rust-analyzer",
         "type": "github"
       }
     },
-    "nixpkgs_2": {
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": "nixpkgs"
+      },
       "locked": {
-        "lastModified": 1716330097,
-        "narHash": "sha256-8BO3B7e3BiyIDsaKA0tY8O88rClYRTjvAp66y+VBUeU=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "5710852ba686cc1fd0d3b8e22b3117d43ba374c2",
+        "lastModified": 1762655942,
+        "narHash": "sha256-hOM12KcQNQALrhB9w6KJmV5hPpm3GA763HRe9o7JUiI=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "6ac961b02d4235572692241e333d0470637f5492",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "nixos-unstable",
-        "repo": "nixpkgs",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
         "type": "github"
       }
     },
-    "nixpkgs_3": {
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "fff",
+          "nixpkgs"
+        ]
+      },
       "locked": {
-        "lastModified": 1734991663,
-        "narHash": "sha256-8T660guvdaOD+2/Cj970bWlQwAyZLKrrbkhYOFcY1YE=",
-        "owner": "nixos",
-        "repo": "nixpkgs",
-        "rev": "6c90912761c43e22b6fb000025ab96dd31c971ff",
+        "lastModified": 1765680428,
+        "narHash": "sha256-fyPmRof9SZeI14ChPk5rVPOm7ISiiGkwGCunkhM+eUg=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "eb3898d8ef143d4bf0f7f2229105fc51c7731b2f",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
-        "ref": "nixos-24.11",
-        "repo": "nixpkgs",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
         "type": "github"
       }
     },
-    "nixpkgs_4": {
+    "rust-overlay_3": {
+      "inputs": {
+        "nixpkgs": "nixpkgs_9"
+      },
       "locked": {
-        "lastModified": 1731763621,
-        "narHash": "sha256-ddcX4lQL0X05AYkrkV2LMFgGdRvgap7Ho8kgon3iWZk=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "c69a9bffbecde46b4b939465422ddc59493d3e4d",
+        "lastModified": 1762742448,
+        "narHash": "sha256-XMxV0h13gg63s0sV6beihCIqdpcJhtbse6DHI743nvo=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "7f3556887e3375dc26ff1601b57c93ee286f2c5e",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "nixpkgs-unstable",
-        "repo": "nixpkgs",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
         "type": "github"
       }
     },
-    "nixpkgs_5": {
+    "sops": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
       "locked": {
-        "lastModified": 1732238832,
-        "narHash": "sha256-sQxuJm8rHY20xq6Ah+GwIUkF95tWjGRd1X8xF+Pkk38=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "8edf06bea5bcbee082df1b7369ff973b91618b8d",
+        "lastModified": 1767826491,
+        "narHash": "sha256-WSBENPotD2MIhZwolL6GC9npqgaS5fkM7j07V2i/Ur8=",
+        "owner": "Mic92",
+        "repo": "sops-nix",
+        "rev": "ea3adcb6d2a000d9a69d0e23cad1f2cacb3a9fbe",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "nixpkgs-unstable",
-        "repo": "nixpkgs",
+        "owner": "Mic92",
+        "repo": "sops-nix",
         "type": "github"
       }
     },
-    "nixpkgs_6": {
+    "spectr": {
+      "inputs": {
+        "flake-fmt": "flake-fmt",
+        "flake-utils": "flake-utils_7",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "treefmt-nix": "treefmt-nix_6"
+      },
       "locked": {
-        "lastModified": 1733212471,
-        "narHash": "sha256-M1+uCoV5igihRfcUKrr1riygbe73/dzNnzPsmaLCmpo=",
-        "owner": "nixos",
-        "repo": "nixpkgs",
-        "rev": "55d15ad12a74eb7d4646254e13638ad0c4128776",
+        "lastModified": 1767825946,
+        "narHash": "sha256-ADJYgShRbiMpP9YrtM9ga2XIK5y9lHus+W/PSDr4/CE=",
+        "owner": "connerohnesorge",
+        "repo": "spectr",
+        "rev": "0f0ff22ded8fff83cae17825ac78c2500d387797",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
-        "ref": "nixos-unstable",
-        "repo": "nixpkgs",
+        "owner": "connerohnesorge",
+        "repo": "spectr",
         "type": "github"
       }
     },
-    "nur": {
+    "stylix": {
       "inputs": {
-        "flake-parts": "flake-parts",
+        "base16": "base16",
+        "base16-fish": "base16-fish",
+        "base16-helix": "base16-helix",
+        "base16-vim": "base16-vim",
+        "firefox-gnome-theme": "firefox-gnome-theme",
+        "flake-parts": "flake-parts_6",
+        "gnome-shell": "gnome-shell",
         "nixpkgs": [
-          "nixpkgs-unstable"
+          "nixpkgs"
         ],
-        "treefmt-nix": "treefmt-nix"
+        "nur": "nur",
+        "systems": [
+          "systems"
+        ],
+        "tinted-foot": "tinted-foot",
+        "tinted-kitty": "tinted-kitty",
+        "tinted-schemes": "tinted-schemes",
+        "tinted-tmux": "tinted-tmux",
+        "tinted-zed": "tinted-zed"
       },
       "locked": {
-        "lastModified": 1736354715,
-        "narHash": "sha256-phj5W25sMhlkBg8rc3hEzSlZQCfOBipq647bCZ7fOuc=",
-        "owner": "nix-community",
-        "repo": "NUR",
-        "rev": "3cd3e6c29d1343ab573eae77b881e20cfaf63342",
+        "lastModified": 1767652667,
+        "narHash": "sha256-zsgfockkvK0JrSvzVAb8JeUq3SDdITu6ViUf7yeIpi4=",
+        "rev": "a4406d9799d002c41296c72378a1094a8fc9aa1b",
+        "revCount": 1322,
+        "type": "tarball",
+        "url": "https://api.flakehub.com/f/pinned/danth/stylix/0.1.1322%2Brev-a4406d9799d002c41296c72378a1094a8fc9aa1b/019b9050-9e23-75be-a24b-3611e194dea1/source.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://flakehub.com/f/danth/stylix/0.1.776"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_10": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_11": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
         "type": "github"
       },
       "original": {
-        "owner": "nix-community",
-        "repo": "NUR",
+        "owner": "nix-systems",
+        "repo": "default",
         "type": "github"
       }
     },
-    "root": {
-      "inputs": {
-        "darwin": "darwin",
-        "disko": "disko",
-        "ghostty": "ghostty",
-        "gitignore": "gitignore",
-        "home-manager": "home-manager",
-        "homebrew-bundle": "homebrew-bundle",
-        "homebrew-cask": "homebrew-cask",
-        "homebrew-core": "homebrew-core",
-        "hyprwm-qtutils": "hyprwm-qtutils",
-        "nix-homebrew": "nix-homebrew",
-        "nix-ld": "nix-ld",
-        "nixos-hardware": "nixos-hardware",
-        "nixpkgs": "nixpkgs_3",
-        "nixpkgs-unstable": "nixpkgs-unstable_2",
-        "nur": "nur",
-        "snowfall-lib": "snowfall-lib",
-        "sops-nix": "sops-nix",
-        "stylix": "stylix",
-        "zen-browser": "zen-browser"
-      }
-    },
-    "snowfall-lib": {
-      "inputs": {
-        "flake-compat": "flake-compat_2",
-        "flake-utils-plus": "flake-utils-plus",
-        "nixpkgs": [
-          "nixpkgs"
-        ]
-      },
+    "systems_2": {
       "locked": {
-        "lastModified": 1732544274,
-        "narHash": "sha256-qvzLIxuqukl0nxpXHEh5+iw1BLeLxYOwRC0+7cFUbPo=",
-        "owner": "snowfallorg",
-        "repo": "lib",
-        "rev": "cfeacd055545ab5de0ecfd41e09324dcd8fb2bbb",
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
         "type": "github"
       },
       "original": {
-        "owner": "snowfallorg",
-        "repo": "lib",
+        "owner": "nix-systems",
+        "repo": "default",
         "type": "github"
       }
     },
-    "sops-nix": {
-      "inputs": {
-        "nixpkgs": "nixpkgs_4"
-      },
+    "systems_3": {
       "locked": {
-        "lastModified": 1734546875,
-        "narHash": "sha256-6OvJbqQ6qPpNw3CA+W8Myo5aaLhIJY/nNFDk3zMXLfM=",
-        "owner": "Mic92",
-        "repo": "sops-nix",
-        "rev": "ed091321f4dd88afc28b5b4456e0a15bd8374b4d",
+        "lastModified": 1689347949,
+        "narHash": "sha256-12tWmuL2zgBgZkdoB6qXZsgJEH9LR3oUgpaQq2RbI80=",
+        "owner": "nix-systems",
+        "repo": "default-linux",
+        "rev": "31732fcf5e8fea42e59c2488ad31a0e651500f68",
         "type": "github"
       },
       "original": {
-        "owner": "Mic92",
-        "repo": "sops-nix",
+        "owner": "nix-systems",
+        "repo": "default-linux",
         "type": "github"
       }
     },
-    "stylix": {
-      "inputs": {
-        "base16": "base16",
-        "base16-fish": "base16-fish",
-        "base16-helix": "base16-helix",
-        "base16-vim": "base16-vim",
-        "flake-compat": "flake-compat_3",
-        "flake-utils": "flake-utils_4",
-        "gnome-shell": "gnome-shell",
-        "home-manager": "home-manager_2",
-        "nixpkgs": "nixpkgs_5",
-        "systems": "systems_5",
-        "tinted-foot": "tinted-foot",
-        "tinted-kitty": "tinted-kitty",
-        "tinted-tmux": "tinted-tmux"
-      },
+    "systems_4": {
       "locked": {
-        "lastModified": 1734885904,
-        "narHash": "sha256-NxA4JnLuXyle2/nUKDbW8vORwSd+Z20limIl7DhlZbs=",
-        "owner": "danth",
-        "repo": "stylix",
-        "rev": "4d87b96ceca38532f39c1b7efd8a9235bfcee3d6",
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
         "type": "github"
       },
       "original": {
-        "owner": "danth",
-        "repo": "stylix",
+        "owner": "nix-systems",
+        "repo": "default",
         "type": "github"
       }
     },
-    "systems": {
+    "systems_5": {
       "locked": {
         "lastModified": 1681028828,
         "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
@@ -844,22 +2265,22 @@
         "type": "github"
       }
     },
-    "systems_2": {
+    "systems_6": {
       "locked": {
-        "lastModified": 1689347949,
-        "narHash": "sha256-12tWmuL2zgBgZkdoB6qXZsgJEH9LR3oUgpaQq2RbI80=",
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
         "owner": "nix-systems",
-        "repo": "default-linux",
-        "rev": "31732fcf5e8fea42e59c2488ad31a0e651500f68",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
         "type": "github"
       },
       "original": {
         "owner": "nix-systems",
-        "repo": "default-linux",
+        "repo": "default",
         "type": "github"
       }
     },
-    "systems_3": {
+    "systems_7": {
       "locked": {
         "lastModified": 1681028828,
         "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
@@ -874,7 +2295,7 @@
         "type": "github"
       }
     },
-    "systems_4": {
+    "systems_8": {
       "locked": {
         "lastModified": 1681028828,
         "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
@@ -889,7 +2310,7 @@
         "type": "github"
       }
     },
-    "systems_5": {
+    "systems_9": {
       "locked": {
         "lastModified": 1681028828,
         "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
@@ -924,28 +2345,43 @@
     "tinted-kitty": {
       "flake": false,
       "locked": {
-        "lastModified": 1716423189,
-        "narHash": "sha256-2xF3sH7UIwegn+2gKzMpFi3pk5DlIlM18+vj17Uf82U=",
+        "lastModified": 1735730497,
+        "narHash": "sha256-4KtB+FiUzIeK/4aHCKce3V9HwRvYaxX+F1edUrfgzb8=",
         "owner": "tinted-theming",
         "repo": "tinted-kitty",
-        "rev": "eb39e141db14baef052893285df9f266df041ff8",
+        "rev": "de6f888497f2c6b2279361bfc790f164bfd0f3fa",
         "type": "github"
       },
       "original": {
         "owner": "tinted-theming",
         "repo": "tinted-kitty",
-        "rev": "eb39e141db14baef052893285df9f266df041ff8",
+        "type": "github"
+      }
+    },
+    "tinted-schemes": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1763914658,
+        "narHash": "sha256-Hju0WtMf3iForxtOwXqGp3Ynipo0EYx1AqMKLPp9BJw=",
+        "owner": "tinted-theming",
+        "repo": "schemes",
+        "rev": "0f6be815d258e435c9b137befe5ef4ff24bea32c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "tinted-theming",
+        "repo": "schemes",
         "type": "github"
       }
     },
     "tinted-tmux": {
       "flake": false,
       "locked": {
-        "lastModified": 1729501581,
-        "narHash": "sha256-1ohEFMC23elnl39kxWnjzH1l2DFWWx4DhFNNYDTYt54=",
+        "lastModified": 1764465359,
+        "narHash": "sha256-lbSVPqLEk2SqMrnpvWuKYGCaAlfWFMA6MVmcOFJjdjE=",
         "owner": "tinted-theming",
         "repo": "tinted-tmux",
-        "rev": "f0e7f7974a6441033eb0a172a0342e96722b4f14",
+        "rev": "edf89a780e239263cc691a987721f786ddc4f6aa",
         "type": "github"
       },
       "original": {
@@ -954,19 +2390,154 @@
         "type": "github"
       }
     },
+    "tinted-zed": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1764464512,
+        "narHash": "sha256-rCD/pAhkMdCx6blsFwxIyvBJbPZZ1oL2sVFrH07lmqg=",
+        "owner": "tinted-theming",
+        "repo": "base16-zed",
+        "rev": "907dbba5fb8cf69ebfd90b00813418a412d0a29a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "tinted-theming",
+        "repo": "base16-zed",
+        "type": "github"
+      }
+    },
     "treefmt-nix": {
       "inputs": {
         "nixpkgs": [
-          "nur",
+          "conclaude",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1762410071,
+        "narHash": "sha256-aF5fvoZeoXNPxT0bejFUBXeUjXfHLSL7g+mjR/p5TEg=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "97a30861b13c3731a84e09405414398fbf3e109f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_2": {
+      "inputs": {
+        "nixpkgs": [
+          "kiro-flake",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1756662192,
+        "narHash": "sha256-F1oFfV51AE259I85av+MAia221XwMHCOtZCMcZLK2Jk=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "1aabc6c05ccbcbf4a635fb7a90400e44282f61c4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_3": {
+      "inputs": {
+        "nixpkgs": "nixpkgs_5"
+      },
+      "locked": {
+        "lastModified": 1767738726,
+        "narHash": "sha256-bHATlMr42JABTJgi4Wc8SJCK8Cv9AnR6HCl3k8eTwEs=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "4db0238d79254c6d14f251808dc5264b8fc81b73",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_4": {
+      "inputs": {
+        "nixpkgs": [
+          "ovim",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1762410071,
+        "narHash": "sha256-aF5fvoZeoXNPxT0bejFUBXeUjXfHLSL7g+mjR/p5TEg=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "97a30861b13c3731a84e09405414398fbf3e109f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_5": {
+      "inputs": {
+        "nixpkgs": "nixpkgs_10"
+      },
+      "locked": {
+        "lastModified": 1754061284,
+        "narHash": "sha256-ONcNxdSiPyJ9qavMPJYAXDNBzYobHRxw0WbT38lKbwU=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "58bd4da459f0a39e506847109a2a5cfceb837796",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_6": {
+      "inputs": {
+        "nixpkgs": [
+          "spectr",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1756662192,
+        "narHash": "sha256-F1oFfV51AE259I85av+MAia221XwMHCOtZCMcZLK2Jk=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "1aabc6c05ccbcbf4a635fb7a90400e44282f61c4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "treefmt-nix_7": {
+      "inputs": {
+        "nixpkgs": [
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1733222881,
-        "narHash": "sha256-JIPcz1PrpXUCbaccEnrcUS8jjEb/1vJbZz5KkobyFdM=",
+        "lastModified": 1767801790,
+        "narHash": "sha256-QfX6g3Wj2vQe7oBJEbTf0npvC6sJoDbF9hb2+gM5tf8=",
         "owner": "numtide",
         "repo": "treefmt-nix",
-        "rev": "49717b5af6f80172275d47a418c9719a31a78b53",
+        "rev": "778a1d691f1ef45dd68c661715c5bf8cbf131c80",
         "type": "github"
       },
       "original": {
@@ -975,20 +2546,93 @@
         "type": "github"
       }
     },
+    "xdph": {
+      "inputs": {
+        "hyprland-protocols": [
+          "hyprland",
+          "hyprland-protocols"
+        ],
+        "hyprlang": [
+          "hyprland",
+          "hyprlang"
+        ],
+        "hyprutils": [
+          "hyprland",
+          "hyprutils"
+        ],
+        "hyprwayland-scanner": [
+          "hyprland",
+          "hyprwayland-scanner"
+        ],
+        "nixpkgs": [
+          "hyprland",
+          "nixpkgs"
+        ],
+        "systems": [
+          "hyprland",
+          "systems"
+        ]
+      },
+      "locked": {
+        "lastModified": 1761431178,
+        "narHash": "sha256-xzjC1CV3+wpUQKNF+GnadnkeGUCJX+vgaWIZsnz9tzI=",
+        "owner": "hyprwm",
+        "repo": "xdg-desktop-portal-hyprland",
+        "rev": "4b8801228ff958d028f588f0c2b911dbf32297f9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "xdg-desktop-portal-hyprland",
+        "type": "github"
+      }
+    },
+    "xome": {
+      "inputs": {
+        "flake-utils": "flake-utils_4",
+        "home-manager": [
+          "nix-version-search",
+          "home-manager"
+        ],
+        "libSource": "libSource_2",
+        "nixpkgs": [
+          "nix-version-search",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754692188,
+        "narHash": "sha256-vmWLTsnhnYHKxPKZM1BFGbIQvSym49JiGtv1+rjAkCQ=",
+        "owner": "jeff-hykin",
+        "repo": "xome",
+        "rev": "fa436c4880cbb064c1e48c8e898fbe8845b25fc3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "jeff-hykin",
+        "repo": "xome",
+        "type": "github"
+      }
+    },
     "zen-browser": {
       "inputs": {
-        "nixpkgs": "nixpkgs_6"
+        "home-manager": [
+          "home-manager"
+        ],
+        "nixpkgs": [
+          "nixpkgs"
+        ]
       },
       "locked": {
-        "lastModified": 1735685017,
-        "narHash": "sha256-aXq6jQuaC9EdQcoocoKfqMPN+niB8hZ/JfokkAezP9w=",
-        "owner": "conneroisu",
+        "lastModified": 1768083628,
+        "narHash": "sha256-6M+vlMGur7UgzkHucgA61pjq3gtjGH9OywxJM/KHL8I=",
+        "owner": "0xc000022070",
         "repo": "zen-browser-flake",
-        "rev": "e67e11400c8ac4a8ab96de87ae777818f3dab7e5",
+        "rev": "5c9624f3d0176727284678aebf677770dd1375b2",
         "type": "github"
       },
       "original": {
-        "owner": "conneroisu",
+        "owner": "0xc000022070",
         "repo": "zen-browser-flake",
         "type": "github"
       }
@@ -996,20 +2640,24 @@
     "zig": {
       "inputs": {
         "flake-compat": [
-          "ghostty"
+          "ghostty",
+          "flake-compat"
+        ],
+        "flake-utils": [
+          "ghostty",
+          "flake-utils"
         ],
-        "flake-utils": "flake-utils",
         "nixpkgs": [
           "ghostty",
-          "nixpkgs-stable"
+          "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1717848532,
-        "narHash": "sha256-d+xIUvSTreHl8pAmU1fnmkfDTGQYCn2Rb/zOwByxS2M=",
+        "lastModified": 1763295135,
+        "narHash": "sha256-sGv/NHCmEnJivguGwB5w8LRmVqr1P72OjS+NzcJsssE=",
         "owner": "mitchellh",
         "repo": "zig-overlay",
-        "rev": "02fc5cc555fc14fda40c42d7c3250efa43812b43",
+        "rev": "64f8b42cfc615b2cf99144adf2b7728c7847c72a",
         "type": "github"
       },
       "original": {
@@ -1017,6 +2665,28 @@
         "repo": "zig-overlay",
         "type": "github"
       }
+    },
+    "zon2nix": {
+      "inputs": {
+        "nixpkgs": [
+          "ghostty",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1758405547,
+        "narHash": "sha256-WgaDgvIZMPvlZcZrpPMjkaalTBnGF2lTG+62znXctWM=",
+        "owner": "jcollie",
+        "repo": "zon2nix",
+        "rev": "bf983aa90ff169372b9fa8c02e57ea75e0b42245",
+        "type": "github"
+      },
+      "original": {
+        "owner": "jcollie",
+        "repo": "zon2nix",
+        "rev": "bf983aa90ff169372b9fa8c02e57ea75e0b42245",
+        "type": "github"
+      }
     }
   },
   "root": "root",
diff --git a/flake.nix b/flake.nix
index 41bdc154..4c316b8e 100644
--- a/flake.nix
+++ b/flake.nix
@@ -1,130 +1,343 @@
 {
-  description = "Conner Ohnesorge's NixOS Config";
+  description = "Modular configuration of Home Manager and NixOS with Denix";
 
   inputs = {
-    nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-24.11";
-    nixpkgs-unstable.url = "github:nixos/nixpkgs?ref=nixos-unstable";
-    nixos-hardware.url = "github:NixOS/nixos-hardware/master";
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
+    zen-browser = {
+      url = "github:0xc000022070/zen-browser-flake";
+      inputs.nixpkgs.follows = "nixpkgs";
+      inputs.home-manager.follows = "home-manager";
+    };
 
-    nix-ld.url = "github:Mic92/nix-ld";
-    nix-ld.inputs.nixpkgs.follows = "nixpkgs";
+    firefox-addons = {
+      url = "github:connerohnesorge/nur-expressions?dir=pkgs/firefox-addons";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
 
-    zen-browser.url = "github:conneroisu/zen-browser-flake?tag=v0.1.0";
+    proton-authenticator.url = "github:connerohnesorge/proton-authenticator-flake?ref=0494e1b70724861b4f8e2fb314b744e0591dfbb5";
+    proton-authenticator.inputs.nixpkgs.follows = "nixpkgs";
 
-    stylix.url = "github:danth/stylix";
+    spectr.url = "github:connerohnesorge/spectr";
+    spectr.inputs.nixpkgs.follows = "nixpkgs";
 
-    hyprwm-qtutils = {
-      url = "github:hyprwm/hyprland-qtutils";
+    ovim.url = "github:connerohnesorge/ovim?ref=2cad976dc4b5b7ae59726053d2b0b67b2b655ec2";
+    ovim.inputs.nixpkgs.follows = "nixpkgs";
+
+    conclaude = {
+      url = "github:connerohnesorge/conclaude";
       inputs.nixpkgs.follows = "nixpkgs";
+      inputs.crane.follows = "crane";
     };
 
-    ghostty.url = "github:ghostty-org/ghostty/main";
-
-    sops-nix.url = "github:Mic92/sops-nix";
+    nix-ai-tools = {
+      url = "github:numtide/llm-agents.nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+      inputs.treefmt-nix.follows = "treefmt-nix";
+    };
 
-    snowfall-lib = {
-      url = "github:snowfallorg/lib";
+    kiro-flake = {
+      url = "github:connerohnesorge/kiro-flake";
       inputs.nixpkgs.follows = "nixpkgs";
     };
 
+    nordvpn.url = "github:connerohnesorge/nordvpn-flake";
+    nordvpn.inputs.nixpkgs.follows = "nixpkgs";
+
+    nix-darwin.url = "github:nix-darwin/nix-darwin/master";
+    nix-darwin.inputs.nixpkgs.follows = "nixpkgs";
+
     home-manager = {
-      url = "github:nix-community/home-manager";
+      url = "github:nix-community/home-manager/master";
       inputs.nixpkgs.follows = "nixpkgs";
     };
 
-    darwin.url = "github:LnL7/nix-darwin/master";
-    darwin.inputs.nixpkgs.follows = "nixpkgs";
+    nixos-wsl.url = "github:nix-community/NixOS-WSL/main";
+
+    nixos-hardware.url = "github:NixOS/nixos-hardware/master";
+    flake-utils.url = "github:numtide/flake-utils";
+    systems.url = "github:nix-systems/default";
+
+    determinate.url = "https://flakehub.com/f/DeterminateSystems/determinate/*";
+    denix = {
+      url = "github:yunfachi/denix";
+      inputs = {
+        nixpkgs.follows = "nixpkgs";
+        home-manager.follows = "home-manager";
+        nix-darwin.follows = "nix-darwin";
+      };
+    };
+
+    hyprland.url = "github:hyprwm/hyprland";
+    hyprland.inputs.nixpkgs.follows = "nixpkgs";
+
+    nix-ld.url = "github:Mic92/nix-ld";
+    nix-ld.inputs.nixpkgs.follows = "nixpkgs";
+
+    stylix.url = "https://flakehub.com/f/danth/stylix/0.1.776";
+    stylix.inputs = {
+      nixpkgs.follows = "nixpkgs";
+      systems.follows = "systems";
+    };
+
+    ghostty.url = "github:ghostty-org/ghostty/main";
+    ghostty.inputs = {
+      nixpkgs.follows = "nixpkgs";
+      flake-utils.follows = "flake-utils";
+    };
+
+    blink.url = "github:Saghen/blink.cmp";
+    blink.inputs.nixpkgs.follows = "nixpkgs";
+
+    fff = {
+      url = "github:dmtrKovalenko/fff.nvim";
+      inputs = {
+        nixpkgs.follows = "nixpkgs";
+        flake-utils.follows = "flake-utils";
+        crane.follows = "crane";
+      };
+    };
 
-    nix-homebrew.url = "github:zhaofengli-wip/nix-homebrew";
+    crane.url = "github:ipetkov/crane";
+
+    nix-index-database.url = "github:nix-community/nix-index-database";
+    nix-index-database.inputs.nixpkgs.follows = "nixpkgs";
+    sops = {
+      url = "github:Mic92/sops-nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
 
-    homebrew-core.url = "github:Homebrew/homebrew-core";
-    homebrew-core.flake = false;
+    disko = {
+      url = "github:nix-community/disko";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
 
-    homebrew-cask.url = "github:Homebrew/homebrew-cask";
-    homebrew-bundle.url = "github:Homebrew/homebrew-bundle";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
 
-    homebrew-cask.flake = false;
-    homebrew-bundle.flake = false;
+    nix-auth.url = "github:numtide/nix-auth";
+    nix-auth.inputs.nixpkgs.follows = "nixpkgs";
 
-    gitignore = {
-      url = "github:hercules-ci/gitignore.nix";
+    nix-version-search = {
+      url = "github:jeff-hykin/nix_version_search_cli";
       inputs.nixpkgs.follows = "nixpkgs";
     };
 
-    disko.url = "github:nix-community/disko";
-    disko.inputs.nixpkgs.follows = "nixpkgs";
-    nur = {
-      url = "github:nix-community/NUR";
-      inputs.nixpkgs.follows = "nixpkgs-unstable";
+    flake-parts = {
+      url = "github:hercules-ci/flake-parts";
+    };
+
+    # Used for shell.nix
+    flake-compat = {
+      url = "github:edolstra/flake-compat";
+      flake = false;
     };
   };
 
-  outputs = inputs: let
-    inherit (inputs) snowfall-lib;
-    lib = snowfall-lib.mkLib {
-      inherit inputs;
-      inherit (inputs) stylix nix-darwin homebrew-core homebrew-cask homebrew-bundle disko;
-      src = ./.;
-
-      snowfall = {
-        namespace = "csnow";
-        meta = {
-          name = "conneroisu-snow";
-          title = "Conner Ohnesorge's Snowflake";
+  outputs = inputs @ {
+    denix,
+    flake-parts,
+    ...
+  }:
+    flake-parts.lib.mkFlake {inherit inputs;} {
+      systems = [
+        "x86_64-linux"
+        "x86_64-darwin"
+        "aarch64-linux"
+        "aarch64-darwin"
+      ];
+
+      imports = [];
+
+      flake = let
+        mkConfigurations = moduleSystem:
+          denix.lib.configurations {
+            # homeManagerUser is set dynamically per-host via myconfig.host.username
+            # See modules/config/constants.nix and modules/config/home.nix
+            inherit moduleSystem;
+
+            paths = [./hosts ./modules ./rices];
+
+            specialArgs = {
+              inherit inputs;
+            };
+          };
+      in {
+        nixosConfigurations = mkConfigurations "nixos";
+        homeConfigurations = mkConfigurations "home";
+        darwinConfigurations = mkConfigurations "darwin";
+
+        templates = {
+          devshell = {
+            description = "A devshell for developing with nix.";
+            path = ./templates/devshell;
+          };
+          go-shell = {
+            description = "A go shell for developing with nix.";
+            path = ./templates/go-shell;
+          };
+          templ-shell = {
+            description = "A go + templ shell for developing with nix.";
+            path = ./templates/templ-shell;
+          };
+          rust-shell = {
+            description = "A rust shell for developing with nix.";
+            path = ./templates/rust-shell;
+          };
+          askama-shell = {
+            description = "A rust web shell for developing with nix and askama.";
+            path = ./templates/askama-shell;
+          };
+          typescript-shell = {
+            description = "A TypeScript shell with modern tooling (ESLint, oxlint, Biome, LSPs).";
+            path = ./templates/typescript-shell;
+          };
+          remix-shell = {
+            description = "A Remix JS shell for developing with bun.";
+            path = ./templates/remix-shell;
+          };
+          phoenix-shell = {
+            description = "An Elixir Phoenix Framework shell for developing with nix.";
+            path = ./templates/phoenix-shell;
+          };
+          laravel-shell = {
+            description = "A Laravel shell for developing with nix.";
+            path = ./templates/laravel-shell;
+          };
+          lua-shell = {
+            description = "A lua shell for developing with nix.";
+            path = ./templates/lua-shell;
+          };
+          ocaml-shell = {
+            description = "An OCaml shell with modern tooling and best practices.";
+            path = ./templates/ocaml-shell;
+          };
+          python-shell = {
+            description = "A Python shell with modern tooling (basedpyright, ruff, black, pytest).";
+            path = ./templates/python-shell;
+          };
+          cpp-shell = {
+            description = "A C++ shell with modern tooling (GCC, Clang, CMake, static analysis).";
+            path = ./templates/cpp-shell;
+          };
+          csharp-shell = {
+            description = "A C# development shell with .NET 8 SDK and buildDotnetModule support.";
+            path = ./templates/csharp-shell;
+          };
+          cuda-shell = {
+            description = "A cuda shell for developing with nix.";
+            path = ./templates/cuda-shell;
+          };
+          zig-shell = {
+            description = "A zig shell for developing with nix.";
+            path = ./templates/zig-shell;
+          };
+          starlight-shell = {
+            description = "A astro starlight docs site shell/project for developing with nix.";
+            path = ./templates/starlight-shell;
+          };
+          latex-shell = {
+            description = "A LaTeX development shell with Overleaf-equivalent features.";
+            path = ./templates/latex-shell;
+          };
         };
       };
-    };
-  in
-    lib.mkFlake {
-      inherit inputs;
-      src = ./.;
-      channels-config = {
-        allowUnfree = true;
-      };
 
-      systems.modules = {
-        # Add modules to all NixOS systems.
-        nixos = with inputs; [
-          ./modules/shared
-          home-manager.nixosModules.home-manager
-          stylix.nixosModules.stylix
-          nix-ld.nixosModules.nix-ld
-          disko.nixosModules.disko
-          nur.modules.nixos.default
-          {programs.nix-ld.dev.enable = true;}
-          sops-nix.nixosModules.default
-          {
-            nix.settings.experimental-features = [
-              "nix-command"
-              "flakes"
-            ];
-          }
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
-          }
-        ];
-
-        # Add modules to all Darwin systems.
-        darwin = with inputs; [
-          ./modules/shared
-          nix-homebrew.darwinModules.nix-homebrew
-          home-manager.darwinModules.home-manager
-          sops-nix.darwinModules.default
-          {
-            nix.settings.experimental-features = [
-              "nix-command"
-              "flakes"
-            ];
-          }
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
-          }
-        ];
-      };
-      outputs-builder = channels: {
-        formatter = channels.nixpkgs.alejandra;
+      perSystem = {
+        # config,
+        # self',
+        # inputs',
+        pkgs,
+        # system,
+        ...
+      }: let
+        scripts = {
+          dx = {
+            exec = ''$EDITOR "$REPO_ROOT"/flake.nix'';
+            description = "Edit the flake.nix";
+            deps = [];
+          };
+          lint = {
+            exec = ''
+              REPO_ROOT="$(git rev-parse --show-toplevel)"
+              statix check "$REPO_ROOT"/flake.nix
+              deadnix "$REPO_ROOT"/flake.nix
+              find . -name "go.mod" -type f | while read -r modfile; do
+                  DIR=$(dirname "$modfile")
+                  echo "Linting: $DIR"
+                  (cd "$DIR" && golangci-lint run ./...) || echo "Go linting completed with warnings"
+              done
+              nix flake check "$REPO_ROOT"
+            '';
+            deps = with pkgs; [git statix deadnix golangci-lint];
+            description = "Run linting tools (statix, deadnix, nix flake check)";
+          };
+        };
+
+        scriptPackages =
+          pkgs.lib.mapAttrs
+          (
+            name: script:
+              pkgs.writeShellApplication {
+                inherit name;
+                text = script.exec;
+                runtimeInputs = script.deps or [];
+              }
+          )
+          scripts;
+
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            rustfmt.enable = true; # Rust formatter
+            black.enable = true; # Python formatter
+          };
+        };
+      in {
+        devShells.default = pkgs.mkShell {
+          shellHook = ''
+            export REPO_ROOT="$(git rev-parse --show-toplevel)"
+            export CGO_CFLAGS="-O2"
+          '';
+          packages = with pkgs;
+            [
+              alejandra # Nix
+              nixd
+              gum # Terminal UI toolkit
+              xmlstarlet
+              xml2
+
+              ruff # Python
+              black
+              isort
+              basedpyright
+              luajitPackages.luacheck
+              biome
+              oxlint
+
+              pyrefly
+              poppler
+              sqlite
+              go
+              air
+              golangci-lint
+              gopls
+              revive
+              templ
+              golines
+              golangci-lint-langserver
+              gomarkdoc
+              gotests
+              gotools
+              reftools
+
+              geesefs
+              sops
+            ]
+            ++ builtins.attrValues scriptPackages;
+        };
+
+        formatter = inputs.treefmt-nix.lib.mkWrapper pkgs treefmtModule;
       };
     };
 }
diff --git a/gs-linux.json b/gs-linux.json
new file mode 100644
index 00000000..1b32be02
--- /dev/null
+++ b/gs-linux.json
@@ -0,0 +1,131 @@
+{
+  "audioFx": {
+    "delay": 0,
+    "eq": {
+      "enabled": false,
+      "factor": 1,
+      "values": [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0
+      ]
+    },
+    "pitch": 0,
+    "volume": 1
+  },
+  "enabled": true,
+  "firstUse": 1747126915923,
+  "freshKeybinds": false,
+  "hideMediaView": null,
+  "keybinds": [
+    {
+      "adjustMode": 2,
+      "command": "speed",
+      "enabled": true,
+      "greedy": true,
+      "id": "615940199",
+      "key": {
+        "altKey": true,
+        "code": "KeyA",
+        "ctrlKey": false,
+        "metaKey": false,
+        "shiftKey": false
+      },
+      "valueNumber": -0.1
+    },
+    {
+      "command": "speed",
+      "enabled": true,
+      "greedy": true,
+      "id": "2770900302",
+      "key": {
+        "altKey": true,
+        "code": "KeyX",
+        "ctrlKey": false,
+        "metaKey": false,
+        "shiftKey": false
+      },
+      "valueNumber": 1
+    },
+    {
+      "adjustMode": 2,
+      "command": "speed",
+      "enabled": true,
+      "greedy": true,
+      "id": "5560836055",
+      "key": {
+        "altKey": true,
+        "code": "KeyD",
+        "ctrlKey": false,
+        "metaKey": false,
+        "shiftKey": false
+      },
+      "spacing": 2,
+      "valueNumber": 0.1
+    }
+  ],
+  "keybindsUrlCondition": {
+    "block": true,
+    "parts": [
+      {
+        "id": "4084986174",
+        "type": "STARTS_WITH",
+        "valueContains": "https://docs.google.com",
+        "valueRegex": "",
+        "valueStartsWith": "https://docs.google.com"
+      },
+      {
+        "id": "1967324930",
+        "type": "STARTS_WITH",
+        "valueContains": "https://play.geforcenow.com",
+        "valueRegex": "",
+        "valueStartsWith": "https://play.geforcenow.com"
+      },
+      {
+        "id": "5248830444",
+        "type": "STARTS_WITH",
+        "valueContains": "https://meet.google.com",
+        "valueRegex": "",
+        "valueStartsWith": "https://meet.google.com"
+      },
+      {
+        "id": "5964064829",
+        "type": "STARTS_WITH",
+        "valueContains": "https://zoom.us",
+        "valueRegex": "",
+        "valueStartsWith": "https://zoom.us"
+      },
+      {
+        "id": "8991863059",
+        "type": "STARTS_WITH",
+        "valueContains": "teams.microsoft.com",
+        "valueRegex": "",
+        "valueStartsWith": "teams.microsoft.com"
+      },
+      {
+        "id": "1062177766",
+        "type": "STARTS_WITH",
+        "valueContains": "https://www.figma.com",
+        "valueRegex": "",
+        "valueStartsWith": "https://www.figma.com"
+      },
+      {
+        "id": "7740158674",
+        "type": "STARTS_WITH",
+        "valueContains": "https://docs.qq.com",
+        "valueRegex": "",
+        "valueStartsWith": "https://docs.qq.com"
+      }
+    ]
+  },
+  "lastSpeed": 1,
+  "speed": 1.1,
+  "version": 12
+}
diff --git a/gs.json b/gs.json
new file mode 100644
index 00000000..262f55c9
--- /dev/null
+++ b/gs.json
@@ -0,0 +1 @@
+{"audioFx":{"pitch":0,"volume":1,"delay":0,"eq":{"enabled":false,"factor":1,"values":[0,0,0,0,0,0,0,0,0,0]}},"enabled":true,"firstUse":1747126915923,"freshKeybinds":false,"keybinds":[{"id":"615940199","command":"speed","enabled":true,"greedy":true,"key":{"ctrlKey":false,"altKey":false,"shiftKey":false,"metaKey":true,"code":"KeyA"},"adjustMode":2,"valueNumber":-0.1},{"id":"2770900302","command":"speed","enabled":true,"greedy":true,"key":{"ctrlKey":false,"altKey":false,"shiftKey":false,"metaKey":true,"code":"KeyX"},"valueNumber":1},{"id":"5560836055","command":"speed","enabled":true,"greedy":true,"key":{"ctrlKey":false,"altKey":false,"shiftKey":false,"metaKey":true,"code":"KeyD"},"adjustMode":2,"valueNumber":0.1,"spacing":1}],"keybindsUrlCondition":{"block":true,"parts":[{"id":"4084986174","type":"STARTS_WITH","valueStartsWith":"https://docs.google.com","valueContains":"https://docs.google.com","valueRegex":""},{"id":"1967324930","type":"STARTS_WITH","valueStartsWith":"https://play.geforcenow.com","valueContains":"https://play.geforcenow.com","valueRegex":""},{"id":"5248830444","type":"STARTS_WITH","valueStartsWith":"https://meet.google.com","valueContains":"https://meet.google.com","valueRegex":""},{"id":"5964064829","type":"STARTS_WITH","valueStartsWith":"https://zoom.us","valueContains":"https://zoom.us","valueRegex":""},{"id":"8991863059","type":"STARTS_WITH","valueStartsWith":"teams.microsoft.com","valueContains":"teams.microsoft.com","valueRegex":""},{"id":"1062177766","type":"STARTS_WITH","valueStartsWith":"https://www.figma.com","valueContains":"https://www.figma.com","valueRegex":""},{"id":"7740158674","type":"STARTS_WITH","valueStartsWith":"https://docs.qq.com","valueContains":"https://docs.qq.com","valueRegex":""}]},"lastSpeed":1,"speed":1.1,"version":12}
diff --git a/homes/aarch64-darwin/connerohnesorge@Conners-MacBook-Air/default.nix b/homes/aarch64-darwin/connerohnesorge@Conners-MacBook-Air/default.nix
deleted file mode 100644
index 99caa260..00000000
--- a/homes/aarch64-darwin/connerohnesorge@Conners-MacBook-Air/default.nix
+++ /dev/null
@@ -1,59 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  home, # The home architecture for this host (eg. `x86_64-linux`).
-  target, # The Snowfall Lib target for this home (eg. `x86_64-home`).
-  format, # A normalized name for the home target (eg. `home`).
-  virtual, # A boolean to determine whether this home is a virtual target using nixos-generators.
-  host, # The host name for this home.
-  # All other arguments come from the home home.
-  config,
-  ...
-}: {
-  snowfallorg.user = {
-    name = "connerohnesorge";
-    enable = true;
-  };
-
-  home.stateVersion = "24.05";
-
-  programs = {
-    zed-editor = {
-      enable = true;
-      extensions = [
-        "nix"
-        "dockerfile"
-        "toml"
-        "html"
-        "templ"
-        "latex"
-        "svelte"
-        "golangci-lint"
-        "astro"
-        "python-lsp"
-        "ocaml"
-        "vhdl"
-        "verilog"
-      ];
-      userSettings = {
-        ui_font_size = 16;
-        buffer_font_size = 16;
-        telemetry.enable = false;
-        vim_mode = true;
-        theme = {
-          mode = "dark";
-          dark = "One Dark";
-          light = "One Light";
-        };
-      };
-    };
-    home-manager.enable = true;
-  };
-}
diff --git a/homes/x86_64-linux/connerohnesorge@xps-nixos/default.nix b/homes/x86_64-linux/connerohnesorge@xps-nixos/default.nix
deleted file mode 100644
index 6b1b6ad5..00000000
--- a/homes/x86_64-linux/connerohnesorge@xps-nixos/default.nix
+++ /dev/null
@@ -1,98 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  # inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  # namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  # home, # The home architecture for this host (eg. `x86_64-linux`).
-  # target, # The Snowfall Lib target for this home (eg. `x86_64-home`).
-  # format, # A normalized name for the home target (eg. `home`).
-  # virtual, # A boolean to determine whether this home is a virtual target using nixos-generators.
-  # host, # The host name for this home.
-  # All other arguments come from the home home.
-  # config,
-  ...
-}: {
-  snowfallorg.user = {
-    name = "connerohnesorge";
-    enable = true;
-  };
-  home.stateVersion = "24.05";
-
-  programs = {
-    zed-editor = {
-      enable = true;
-      extensions = [
-        "nix"
-        "dockerfile"
-        "toml"
-        "html"
-        "templ"
-        "latex"
-        "svelte"
-        "golangci-lint"
-        "astro"
-        "python-lsp"
-        "ocaml"
-        "vhdl"
-        "verilog"
-      ];
-      userSettings = {
-        ui_font_size = lib.mkForce 16;
-        buffer_font_size = lib.mkForce 16;
-        telemetry.enable = lib.mkForce false;
-        vim_mode = lib.mkForce true;
-        theme = lib.mkForce {
-          mode = "dark";
-          dark = "One Dark";
-          light = "One Light";
-        };
-      };
-    };
-    home-manager = {
-      enable = true;
-    };
-  };
-
-  stylix = {
-    enable = true;
-    base16Scheme = "${pkgs.base16-schemes}/share/themes/tokyodark.yaml";
-    image = ./../../../assets/klaus-desktop.jpeg;
-    polarity = "dark";
-    targets.rofi.enable = true;
-    targets.kitty.enable = true;
-  };
-
-  gtk = {
-    enable = true;
-    theme = {
-      name = lib.mkForce "adw-gtk3-dark";
-      package = lib.mkForce pkgs.adw-gtk3;
-    };
-    iconTheme.package = pkgs.papirus-icon-theme;
-    iconTheme.name = "Papirus";
-
-    gtk3.extraConfig = {
-      Settings = ''
-        gtk-application-prefer-dark-theme=1
-      '';
-    };
-
-    gtk4.extraConfig = {
-      Settings = ''
-        gtk-application-prefer-dark-theme=1
-      '';
-    };
-  };
-
-  qt = {
-    enable = true;
-    platformTheme.name = "adwaita";
-    style.name = "adwaita-dark";
-    style.package = pkgs.adwaita-qt;
-  };
-}
diff --git a/hosts/CB14957.local/default.nix b/hosts/CB14957.local/default.nix
new file mode 100644
index 00000000..9b311704
--- /dev/null
+++ b/hosts/CB14957.local/default.nix
@@ -0,0 +1,113 @@
+{
+  delib,
+  inputs,
+  pkgs,
+  config,
+  lib,
+  ...
+}: let
+  system = "aarch64-darwin";
+in
+  delib.host {
+    name = "CB14957.local";
+
+    # Work machine username
+    username = "cohnesor";
+
+    rice = "empty";
+    type = "laptop";
+
+    home.home.stateVersion = "24.11";
+    homeManagerSystem = system;
+
+    myconfig = {
+      features = {
+        engineer.enable = true;
+      };
+      programs = {
+        dx.enable = true;
+        catls.enable = true;
+        convert_img.enable = true;
+      };
+    };
+
+    nixos = {
+      imports = [
+        inputs.determinate.nixosModules.default
+      ];
+      nixpkgs.hostPlatform = "x86_64-linux";
+      nixpkgs.config.allowUnfree = true;
+      nixpkgs.config.allowUnsupportedSystem = true;
+      system.stateVersion = "24.11";
+
+      # Minimal file system configuration to prevent assertion failures
+      fileSystems."/" = {
+        device = "/dev/disk/by-label/nixos";
+        fsType = "ext4";
+      };
+
+      boot.loader.systemd-boot.enable = true;
+      boot.loader.efi.canTouchEfiVariables = true;
+    };
+
+    darwin = {myconfig, ...}: {
+      imports = [
+        # inputs.determinate.darwinModules.default
+      ];
+
+      nixpkgs = {
+        hostPlatform = system;
+        config.allowUnfree = true;
+      };
+      nix.enable = false;
+      programs = {
+        direnv = {
+          enable = true;
+          nix-direnv = {
+            enable = true;
+            package = pkgs.nix-direnv;
+          };
+        };
+        ssh = {
+          extraConfig = ''
+            SetEnv TERM=xterm-256color
+          '';
+        };
+      };
+      system = {
+        stateVersion = 5;
+        primaryUser = myconfig.constants.username;
+        defaults = {
+          dock.autohide = true;
+
+          trackpad = {
+            Clicking = true;
+            TrackpadThreeFingerDrag = true;
+            Dragging = true;
+          };
+        };
+      };
+
+      environment = {
+        systemPackages = [
+          # Macos Only
+          pkgs.aerospace
+          pkgs.raycast
+          pkgs.xcodes
+          # Shared
+        ];
+        shells = [pkgs.zsh];
+
+        pathsToLink = ["/share/qemu"];
+        etc."containers/containers.conf.d/99-gvproxy-path.conf".text = ''
+          [engine]
+          helper_binaries_dir = ["${pkgs.gvproxy}/bin"]
+        '';
+      };
+      users.users.${myconfig.constants.username} = {
+        home = "/Users/${myconfig.constants.username}";
+      };
+
+      security.pam.services.sudo_local.touchIdAuth = true;
+    };
+  }
diff --git a/hosts/doemini/doemini.kicad_pcb b/hosts/doemini/doemini.kicad_pcb
new file mode 100644
index 00000000..e2446e96
--- /dev/null
+++ b/hosts/doemini/doemini.kicad_pcb
@@ -0,0 +1,1521 @@
+(kicad_pcb
+	(version 20241229)
+	(generator "pcbnew")
+	(generator_version "9.0")
+	(general
+		(thickness 1.6)
+		(legacy_teardrops no)
+	)
+	(paper "A4")
+	(layers
+		(0 "F.Cu" signal)
+		(2 "B.Cu" signal)
+		(9 "F.Adhes" user "F.Adhesive")
+		(11 "B.Adhes" user "B.Adhesive")
+		(13 "F.Paste" user)
+		(15 "B.Paste" user)
+		(5 "F.SilkS" user "F.Silkscreen")
+		(7 "B.SilkS" user "B.Silkscreen")
+		(1 "F.Mask" user)
+		(3 "B.Mask" user)
+		(17 "Dwgs.User" user "User.Drawings")
+		(19 "Cmts.User" user "User.Comments")
+		(21 "Eco1.User" user "User.Eco1")
+		(23 "Eco2.User" user "User.Eco2")
+		(25 "Edge.Cuts" user)
+		(27 "Margin" user)
+		(31 "F.CrtYd" user "F.Courtyard")
+		(29 "B.CrtYd" user "B.Courtyard")
+		(35 "F.Fab" user)
+		(33 "B.Fab" user)
+		(39 "User.1" user)
+		(41 "User.2" user)
+		(43 "User.3" user)
+		(45 "User.4" user)
+	)
+	(setup
+		(pad_to_mask_clearance 0)
+		(allow_soldermask_bridges_in_footprints no)
+		(tenting front back)
+		(pcbplotparams
+			(layerselection 0x00000000_00000000_55555555_5755f5ff)
+			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
+			(disableapertmacros no)
+			(usegerberextensions no)
+			(usegerberattributes yes)
+			(usegerberadvancedattributes yes)
+			(creategerberjobfile yes)
+			(dashed_line_dash_ratio 12.000000)
+			(dashed_line_gap_ratio 3.000000)
+			(svgprecision 4)
+			(plotframeref no)
+			(mode 1)
+			(useauxorigin no)
+			(hpglpennumber 1)
+			(hpglpenspeed 20)
+			(hpglpendiameter 15.000000)
+			(pdf_front_fp_property_popups yes)
+			(pdf_back_fp_property_popups yes)
+			(pdf_metadata yes)
+			(pdf_single_document no)
+			(dxfpolygonmode yes)
+			(dxfimperialunits yes)
+			(dxfusepcbnewfont yes)
+			(psnegative no)
+			(psa4output no)
+			(plot_black_and_white yes)
+			(sketchpadsonfab no)
+			(plotpadnumbers no)
+			(hidednponfab no)
+			(sketchdnponfab yes)
+			(crossoutdnponfab yes)
+			(subtractmaskfromsilk no)
+			(outputformat 1)
+			(mirror no)
+			(drillshape 1)
+			(scaleselection 1)
+			(outputdirectory "")
+		)
+	)
+	(net 0 "")
+	(footprint "Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR"
+		(layer "F.Cu")
+		(uuid "a3ab21e3-b933-4e9a-9452-27304ed5e3de")
+		(at 53.5 154.5)
+		(descr "1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://www.amphenol-cs.com/media/wysiwyg/files/drawing/rjmg1bd3b8k1anr.pdf")
+		(tags "RJ45 Magjack")
+		(property "Reference" "REF**"
+			(at 4.445 -5.49 0)
+			(layer "F.SilkS")
+			(uuid "d3de88c3-cf5b-420e-92d6-3d8e2285d62b")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Value" "RJ45_Amphenol_RJMG1BD3B8K1ANR"
+			(at 4.445 18.23 0)
+			(layer "F.Fab")
+			(uuid "7947cf04-c6b5-41d2-9d19-6be68357d69e")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Datasheet" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "954516a5-442a-4008-aaa1-22c991508928")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Description" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "40259691-b775-4830-b503-364cd3d169f5")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(attr through_hole)
+		(fp_line
+			(start -3.73 -1)
+			(end -3.73 1)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "24fa990d-2042-43bb-a57a-7342a94156c3")
+		)
+		(fp_line
+			(start -3.53 -4.59)
+			(end 12.42 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "531c3628-8d83-495b-8e86-5723d0926670")
+		)
+		(fp_line
+			(start -3.53 1.69)
+			(end -3.53 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "19145874-2788-4eeb-a25f-64be7caeddd4")
+		)
+		(fp_line
+			(start -3.53 17.33)
+			(end -3.53 4.89)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "ec155b5f-b69f-4c15-a38a-4f8fa0b57e07")
+		)
+		(fp_line
+			(start 12.42 -4.59)
+			(end 12.42 1.69)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "711cfcf3-f06a-495b-ba7c-c5dddf186cfe")
+		)
+		(fp_line
+			(start 12.42 4.89)
+			(end 12.42 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "7f1c33ef-db17-4332-8f3e-06f59765f270")
+		)
+		(fp_line
+			(start 12.42 17.33)
+			(end -3.53 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "687db15c-c88e-4d37-9bd8-7a070a76d3cf")
+		)
+		(fp_line
+			(start -5.13 2.54)
+			(end -5.13 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "ea120a42-b6be-4e51-ab41-c80b18150c00")
+		)
+		(fp_line
+			(start -5.13 4.04)
+			(end -3.93 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "5d3b4c9d-564d-414b-8f34-bf5324431f81")
+		)
+		(fp_line
+			(start -3.93 -4.99)
+			(end -3.93 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "995c8355-6e97-41f3-968e-7797916c5b9b")
+		)
+		(fp_line
+			(start -3.93 1.34)
+			(end -5.13 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "f0ddcfa5-8747-4b3d-8edd-34fa435e0eb2")
+		)
+		(fp_line
+			(start -3.93 5.24)
+			(end -3.93 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "361b855d-a153-48e3-a19f-5dbb543351c3")
+		)
+		(fp_line
+			(start -3.93 17.73)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "64c82c93-aed4-468e-9747-6030a5a34e49")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end -3.93 -4.99)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "3a711835-9a94-407e-873a-c42eba20d9ce")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end 12.82 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "ea115d22-3903-4aa9-b90f-1b64247a2cdf")
+		)
+		(fp_line
+			(start 12.82 1.34)
+			(end 14.02 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "5bdbd9e4-0665-46b6-8cb8-d1fd85827e84")
+		)
+		(fp_line
+			(start 12.82 5.24)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "4ba4151d-0cda-45f9-98b6-827f71e6246c")
+		)
+		(fp_line
+			(start 14.02 2.54)
+			(end 14.02 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "04f89de8-ae1f-4b66-8264-09c1bf1d802c")
+		)
+		(fp_line
+			(start 14.02 4.04)
+			(end 12.82 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "4390868b-bd15-4f38-88f4-c8a3c151722e")
+		)
+		(fp_line
+			(start -3.43 -4.49)
+			(end 12.32 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "33891251-750b-450b-850f-05d6b26514bd")
+		)
+		(fp_line
+			(start -3.43 17.23)
+			(end -3.43 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "8bed4659-d881-4188-9a85-72a8bd92c53d")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end -1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "a31a8e8e-5556-4a2f-9e52-4ea985ec2fee")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end 1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "b2e293d1-2557-43e7-bf59-9ad1f17887bd")
+		)
+		(fp_line
+			(start 12.32 -4.49)
+			(end 12.32 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "c4777b15-0233-46ee-9c14-c550b3cd2a91")
+		)
+		(fp_line
+			(start 12.32 17.23)
+			(end -3.43 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "f3f46326-ae50-4cad-aaf0-ed90455c7de6")
+		)
+		(fp_text user "${REFERENCE}"
+			(at 4.445 6.37 0)
+			(layer "F.Fab")
+			(uuid "eef2f09c-d90a-43c6-9467-3ab7f173ef1f")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(pad "" np_thru_hole circle
+			(at -1.27 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "29afe414-2569-4c5a-b0c0-3dedfb42be80")
+		)
+		(pad "" np_thru_hole circle
+			(at 10.16 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "2ec39275-176e-4759-980b-e9d926228b88")
+		)
+		(pad "L1" thru_hole circle
+			(at 10.77 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a694250d-60ce-4de2-af59-75216ea0e6dd")
+		)
+		(pad "L2" thru_hole circle
+			(at 8.23 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "872d2f23-02f1-4d60-97d4-01648a98df90")
+		)
+		(pad "L3" thru_hole circle
+			(at 0.66 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "d879e30c-8dbc-406b-9120-d3b13eb3e30f")
+		)
+		(pad "L4" thru_hole circle
+			(at -1.88 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "bd995ce3-19ac-4092-ac35-85165daded38")
+		)
+		(pad "R1" thru_hole rect
+			(at 0 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "99123b1a-ee57-4f6b-97f9-3a7eb4b7e83f")
+		)
+		(pad "R2" thru_hole circle
+			(at 1.27 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "59e2d14f-7715-4b1d-a4fb-b11294ab8877")
+		)
+		(pad "R3" thru_hole circle
+			(at 2.54 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a2a7d965-1a18-4de8-b36c-f76acb07ea93")
+		)
+		(pad "R4" thru_hole circle
+			(at 3.81 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "3c53a461-7a22-4d96-aab6-29f0af68498b")
+		)
+		(pad "R5" thru_hole circle
+			(at 5.08 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "958d699a-5f03-4e53-a0c5-a1042fe4e0a1")
+		)
+		(pad "R6" thru_hole circle
+			(at 6.35 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "bbb1af92-8bb5-4560-93f4-4666777e25a6")
+		)
+		(pad "R7" thru_hole circle
+			(at 7.62 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "bd77ff51-4818-4810-876a-21849c55bf18")
+		)
+		(pad "R8" thru_hole circle
+			(at 8.89 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "d14ae750-6176-46ef-8c3c-5b272e62566d")
+		)
+		(pad "SH" thru_hole circle
+			(at -3.33 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "8382f0c7-17ec-45e3-bd96-0e9575510f51")
+		)
+		(pad "SH" thru_hole circle
+			(at 12.22 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "b6545727-341d-4994-8ae3-f42a0af5c997")
+		)
+		(embedded_fonts no)
+		(model "${KICAD9_3DMODEL_DIR}/Connector_RJ.3dshapes/RJ45_Amphenol_RJMG1BD3B8K1ANR.step"
+			(offset
+				(xyz 0 0 0)
+			)
+			(scale
+				(xyz 1 1 1)
+			)
+			(rotate
+				(xyz 0 0 0)
+			)
+		)
+	)
+	(footprint "Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR"
+		(layer "F.Cu")
+		(uuid "e17b8631-a985-4316-b47e-8b4e6f93d922")
+		(at 80.5 154.5)
+		(descr "1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://www.amphenol-cs.com/media/wysiwyg/files/drawing/rjmg1bd3b8k1anr.pdf")
+		(tags "RJ45 Magjack")
+		(property "Reference" "REF**"
+			(at 4.445 -5.49 0)
+			(layer "F.SilkS")
+			(uuid "071395d9-921a-43be-b2eb-98fab5ab851d")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Value" "RJ45_Amphenol_RJMG1BD3B8K1ANR"
+			(at 4.445 18.23 0)
+			(layer "F.Fab")
+			(uuid "f4268a1e-30bb-4c02-86ee-41d7bf572b99")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Datasheet" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "733ed757-ea67-4293-b9bc-1c9adcb08f2c")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Description" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "a80a9a6c-daad-4425-8008-d4af748422ec")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(attr through_hole)
+		(fp_line
+			(start -3.73 -1)
+			(end -3.73 1)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "ed86fff3-feec-430f-8636-d648a2a5070f")
+		)
+		(fp_line
+			(start -3.53 -4.59)
+			(end 12.42 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "c9bd0dda-37c2-49fe-83c0-eec607accd22")
+		)
+		(fp_line
+			(start -3.53 1.69)
+			(end -3.53 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "762d242a-1999-4103-b5ec-2859bf40c222")
+		)
+		(fp_line
+			(start -3.53 17.33)
+			(end -3.53 4.89)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "b818b261-5a9b-4eaf-b317-bb61d90eb4b1")
+		)
+		(fp_line
+			(start 12.42 -4.59)
+			(end 12.42 1.69)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "890304cf-d541-4a86-8cab-f2ecb828c592")
+		)
+		(fp_line
+			(start 12.42 4.89)
+			(end 12.42 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "16882f85-8194-4640-905b-84f1959ab8c7")
+		)
+		(fp_line
+			(start 12.42 17.33)
+			(end -3.53 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "a149eb6f-6e9d-4001-835a-127557eba55c")
+		)
+		(fp_line
+			(start -5.13 2.54)
+			(end -5.13 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "97554b4d-6f14-4a55-b263-eda84af7796e")
+		)
+		(fp_line
+			(start -5.13 4.04)
+			(end -3.93 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "72fd786a-697d-4243-83a4-8bd4249a7853")
+		)
+		(fp_line
+			(start -3.93 -4.99)
+			(end -3.93 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "26aa4672-47ea-4d47-b2d1-105bf04b533a")
+		)
+		(fp_line
+			(start -3.93 1.34)
+			(end -5.13 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "e0150ce1-c905-400e-99b8-cba8280001c2")
+		)
+		(fp_line
+			(start -3.93 5.24)
+			(end -3.93 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "5de41614-a82a-44a0-b591-c43869ca86b7")
+		)
+		(fp_line
+			(start -3.93 17.73)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "5a8940f3-d40e-4960-8010-276c5e5f12a3")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end -3.93 -4.99)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "c2c78133-dd88-4160-906c-c4f7624b3e50")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end 12.82 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "9ab731c1-c67b-491f-808b-586e63f3d4d6")
+		)
+		(fp_line
+			(start 12.82 1.34)
+			(end 14.02 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "c44513ce-0f8d-4395-8b12-8d209bb42cca")
+		)
+		(fp_line
+			(start 12.82 5.24)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "fca92737-d319-40f4-9748-df49914df988")
+		)
+		(fp_line
+			(start 14.02 2.54)
+			(end 14.02 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "3292d1fb-38b1-49bc-ad3e-5487d4c08ec6")
+		)
+		(fp_line
+			(start 14.02 4.04)
+			(end 12.82 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "4182c7a9-de0e-4080-ab81-2b53d6b007d4")
+		)
+		(fp_line
+			(start -3.43 -4.49)
+			(end 12.32 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "b74f2e76-e6cf-43d7-99a6-f30bf6336991")
+		)
+		(fp_line
+			(start -3.43 17.23)
+			(end -3.43 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "0d76a497-0416-4bdc-90e2-833c5048367a")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end -1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "e74fb34b-868c-410d-9334-c4fa828cd180")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end 1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "7b9ad178-f383-4a71-87b8-b92b6a2e1bd0")
+		)
+		(fp_line
+			(start 12.32 -4.49)
+			(end 12.32 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "7ba66019-5a0f-4286-9f36-9bae238cb830")
+		)
+		(fp_line
+			(start 12.32 17.23)
+			(end -3.43 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "fd635c3a-468d-4c08-84c2-c49da6400b5d")
+		)
+		(fp_text user "${REFERENCE}"
+			(at 4.445 6.37 0)
+			(layer "F.Fab")
+			(uuid "1b2fe9c2-8406-4a76-9a2e-367025728732")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(pad "" np_thru_hole circle
+			(at -1.27 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "b8c7f2a6-be6a-4a39-b664-ba22b4cee6dd")
+		)
+		(pad "" np_thru_hole circle
+			(at 10.16 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "cc47a5d1-1620-4f72-b27a-f5ba1d437cec")
+		)
+		(pad "L1" thru_hole circle
+			(at 10.77 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "0224ba47-eb77-4eac-9c1c-9c93b65d1ed6")
+		)
+		(pad "L2" thru_hole circle
+			(at 8.23 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "61153067-06e9-4196-a1ca-06dfc3f5cee3")
+		)
+		(pad "L3" thru_hole circle
+			(at 0.66 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "2e739625-6332-4be7-9d46-f31f6e226c6f")
+		)
+		(pad "L4" thru_hole circle
+			(at -1.88 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "b96718d9-a942-4540-a94f-81359bbb91f9")
+		)
+		(pad "R1" thru_hole rect
+			(at 0 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "7e552d3d-eccc-4743-add1-ba236b75752e")
+		)
+		(pad "R2" thru_hole circle
+			(at 1.27 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "766c6c33-2412-492b-9992-bc1dc795a0c4")
+		)
+		(pad "R3" thru_hole circle
+			(at 2.54 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a30865cb-95cb-4c87-97a5-89bc9f32786e")
+		)
+		(pad "R4" thru_hole circle
+			(at 3.81 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "f58bc2e4-cab6-44cf-ba5f-c728f631c9d7")
+		)
+		(pad "R5" thru_hole circle
+			(at 5.08 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "581fb5c1-ce2b-4133-897c-26b39e02a35c")
+		)
+		(pad "R6" thru_hole circle
+			(at 6.35 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "4dc78955-9af4-40ad-bbc9-9bd931025c5d")
+		)
+		(pad "R7" thru_hole circle
+			(at 7.62 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a897973c-5dad-41f0-96b4-d9538ce904a5")
+		)
+		(pad "R8" thru_hole circle
+			(at 8.89 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "c8fcaace-6fc7-4a4e-8335-f5a067f2db00")
+		)
+		(pad "SH" thru_hole circle
+			(at -3.33 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "b984be35-8475-4ac8-854e-d7fcbf486c82")
+		)
+		(pad "SH" thru_hole circle
+			(at 12.22 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "75988447-47ed-4707-900e-b2172320523e")
+		)
+		(embedded_fonts no)
+		(model "${KICAD9_3DMODEL_DIR}/Connector_RJ.3dshapes/RJ45_Amphenol_RJMG1BD3B8K1ANR.step"
+			(offset
+				(xyz 0 0 0)
+			)
+			(scale
+				(xyz 1 1 1)
+			)
+			(rotate
+				(xyz 0 0 0)
+			)
+		)
+	)
+	(footprint "Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR"
+		(layer "F.Cu")
+		(uuid "e6eafc12-4a2c-437e-acfb-51610fdcf32a")
+		(at 107.5 154.5)
+		(descr "1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://www.amphenol-cs.com/media/wysiwyg/files/drawing/rjmg1bd3b8k1anr.pdf")
+		(tags "RJ45 Magjack")
+		(property "Reference" "REF**"
+			(at 4.445 -5.49 0)
+			(layer "F.SilkS")
+			(uuid "071dec3c-1685-4726-abcd-ca0493124300")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Value" "RJ45_Amphenol_RJMG1BD3B8K1ANR"
+			(at 4.445 18.23 0)
+			(layer "F.Fab")
+			(uuid "64ebc97b-1b44-4257-9b74-0dd7f8350d8c")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Datasheet" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "2d2636b0-18ca-4e01-8ba7-e77ab998337d")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(property "Description" ""
+			(at 0 0 0)
+			(unlocked yes)
+			(layer "F.Fab")
+			(hide yes)
+			(uuid "c0d25736-5e11-486b-9eec-ff26374c3189")
+			(effects
+				(font
+					(size 1.27 1.27)
+					(thickness 0.15)
+				)
+			)
+		)
+		(attr through_hole)
+		(fp_line
+			(start -3.73 -1)
+			(end -3.73 1)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "532f559f-9411-497a-823b-ab1cb6affe3f")
+		)
+		(fp_line
+			(start -3.53 -4.59)
+			(end 12.42 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "4df52eae-23fa-41c0-9a3e-7e5171b62eda")
+		)
+		(fp_line
+			(start -3.53 1.69)
+			(end -3.53 -4.59)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "44dddb3a-601e-4974-8dcd-fdf50706f9f6")
+		)
+		(fp_line
+			(start -3.53 17.33)
+			(end -3.53 4.89)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "2d867d59-490b-4087-9e02-578f80f6d184")
+		)
+		(fp_line
+			(start 12.42 -4.59)
+			(end 12.42 1.69)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "42396ccd-85f6-4005-a9c8-613509be7d60")
+		)
+		(fp_line
+			(start 12.42 4.89)
+			(end 12.42 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "a67b7b87-4b24-467d-8299-5258af7dae2b")
+		)
+		(fp_line
+			(start 12.42 17.33)
+			(end -3.53 17.33)
+			(stroke
+				(width 0.12)
+				(type solid)
+			)
+			(layer "F.SilkS")
+			(uuid "859bc5af-baca-4866-9afb-dcaf9da264d6")
+		)
+		(fp_line
+			(start -5.13 2.54)
+			(end -5.13 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "86f6f7c4-e612-4d3b-b3be-0e72e9c7e77c")
+		)
+		(fp_line
+			(start -5.13 4.04)
+			(end -3.93 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "948002f4-3183-4e9c-9b52-04091e2726a8")
+		)
+		(fp_line
+			(start -3.93 -4.99)
+			(end -3.93 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "d5191b96-ffb9-4c16-af44-7341328846d9")
+		)
+		(fp_line
+			(start -3.93 1.34)
+			(end -5.13 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "00a92f38-b6df-42df-959c-f9dfc59c7647")
+		)
+		(fp_line
+			(start -3.93 5.24)
+			(end -3.93 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "619e6016-83f5-4555-8a4a-6d2723e5f8bb")
+		)
+		(fp_line
+			(start -3.93 17.73)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "c8789c38-85e9-41b9-82a6-6fd243a42427")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end -3.93 -4.99)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "0a88be0b-4139-4859-ab94-449fd511b2e9")
+		)
+		(fp_line
+			(start 12.82 -4.99)
+			(end 12.82 1.34)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "bf7e9a31-9667-4bb3-96f8-56997d5fc655")
+		)
+		(fp_line
+			(start 12.82 1.34)
+			(end 14.02 2.54)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "e9274e1e-251c-4c27-ba02-4573d2c553d5")
+		)
+		(fp_line
+			(start 12.82 5.24)
+			(end 12.82 17.73)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "36de1aea-acba-41e0-80b4-f01fcd96495a")
+		)
+		(fp_line
+			(start 14.02 2.54)
+			(end 14.02 4.04)
+			(stroke
+				(width 0.05)
+				(type solid)
+			)
+			(layer "F.CrtYd")
+			(uuid "c26d81ac-6572-497e-9b3f-8ed6d7300a25")
+		)
+		(fp_line
+			(start 14.02 4.04)
+			(end 12.82 5.24)
+			(stroke
+				(width 0.05)
+				(type default)
+			)
+			(layer "F.CrtYd")
+			(uuid "21aabc0c-1d68-448b-be4a-bad00acec9ef")
+		)
+		(fp_line
+			(start -3.43 -4.49)
+			(end 12.32 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "899b94d7-2929-404e-bc91-67e9692b3d8a")
+		)
+		(fp_line
+			(start -3.43 17.23)
+			(end -3.43 -4.49)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "cd8f635c-29cd-4e8c-ac45-6cef0a2f2dc4")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end -1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "1c94562f-6c70-4fbd-8c43-8531c63e18ca")
+		)
+		(fp_line
+			(start 0 -3.49)
+			(end 1 -4.49)
+			(stroke
+				(width 0.1)
+				(type default)
+			)
+			(layer "F.Fab")
+			(uuid "cb9bca2d-dd35-43f5-a6fe-b0bd0b118a4f")
+		)
+		(fp_line
+			(start 12.32 -4.49)
+			(end 12.32 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "2f7c973a-8b2d-4773-bc07-88281e48aebe")
+		)
+		(fp_line
+			(start 12.32 17.23)
+			(end -3.43 17.23)
+			(stroke
+				(width 0.1)
+				(type solid)
+			)
+			(layer "F.Fab")
+			(uuid "47643709-17e5-4fea-abda-359126ed7685")
+		)
+		(fp_text user "${REFERENCE}"
+			(at 4.445 6.37 0)
+			(layer "F.Fab")
+			(uuid "6466a8d3-6d2e-4067-95b3-3e02f35fe8b5")
+			(effects
+				(font
+					(size 1 1)
+					(thickness 0.15)
+				)
+			)
+		)
+		(pad "" np_thru_hole circle
+			(at -1.27 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "214b444b-e414-4300-822d-d138740569f7")
+		)
+		(pad "" np_thru_hole circle
+			(at 10.16 6.34)
+			(size 3.25 3.25)
+			(drill 3.25)
+			(layers "*.Cu" "*.Mask")
+			(uuid "0b4794b4-ed01-4b41-929d-03407a0fd6d3")
+		)
+		(pad "L1" thru_hole circle
+			(at 10.77 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "f6137291-0bb9-4eed-b1a2-a9d2edbbca97")
+		)
+		(pad "L2" thru_hole circle
+			(at 8.23 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a876080d-e33d-47e5-8eec-897c939edad6")
+		)
+		(pad "L3" thru_hole circle
+			(at 0.66 9.72)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "aafad4c9-bdcd-4780-958f-5d1c719d0d4b")
+		)
+		(pad "L4" thru_hole circle
+			(at -1.88 11.24)
+			(size 1.89 1.89)
+			(drill 0.89)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "81fedc19-5a31-4ef2-87b2-a633d6a4a2f5")
+		)
+		(pad "R1" thru_hole rect
+			(at 0 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "77ae2a8f-e1fe-407c-b466-86e0557d4dd3")
+		)
+		(pad "R2" thru_hole circle
+			(at 1.27 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "17e7d936-a182-4871-9e5d-3b49f5016857")
+		)
+		(pad "R3" thru_hole circle
+			(at 2.54 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "72c38fe8-c669-4052-91d0-637d0ddcb142")
+		)
+		(pad "R4" thru_hole circle
+			(at 3.81 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "c404bd9f-1554-430d-ad99-b5c9f8f29d82")
+		)
+		(pad "R5" thru_hole circle
+			(at 5.08 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "011a0796-a21c-4b78-b37f-e094ceff43d4")
+		)
+		(pad "R6" thru_hole circle
+			(at 6.35 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "a62681b4-ada3-43c3-b544-c1c7c2e905ee")
+		)
+		(pad "R7" thru_hole circle
+			(at 7.62 0)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "725c897a-d3db-46b1-814d-3bcf0b6915b8")
+		)
+		(pad "R8" thru_hole circle
+			(at 8.89 -2.54)
+			(size 1.9 1.9)
+			(drill 0.9)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "3851c89f-0991-4565-8a6f-7c216930908a")
+		)
+		(pad "SH" thru_hole circle
+			(at -3.33 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "5841e1af-72e2-4916-a5e6-680444e4ebe8")
+		)
+		(pad "SH" thru_hole circle
+			(at 12.22 3.29)
+			(size 2.6 2.6)
+			(drill 1.6)
+			(layers "*.Cu" "*.Mask")
+			(remove_unused_layers no)
+			(uuid "f60a1516-a807-4361-8217-e50818d01fbf")
+		)
+		(embedded_fonts no)
+		(model "${KICAD9_3DMODEL_DIR}/Connector_RJ.3dshapes/RJ45_Amphenol_RJMG1BD3B8K1ANR.step"
+			(offset
+				(xyz 0 0 0)
+			)
+			(scale
+				(xyz 1 1 1)
+			)
+			(rotate
+				(xyz 0 0 0)
+			)
+		)
+	)
+	(gr_text "minidoe"
+		(at 51 103.5 0)
+		(layer "F.Cu")
+		(uuid "c394429b-aad2-4a08-8c61-99f85484021e")
+		(effects
+			(font
+				(size 1.5 1.5)
+				(thickness 0.3)
+				(bold yes)
+			)
+			(justify left bottom)
+		)
+	)
+	(gr_text "v1 - Conner Ohnesorge"
+		(at 51 106 0)
+		(layer "F.Cu")
+		(uuid "f8a7596a-0cbc-45fc-a3b1-8e82dd1bf53f")
+		(effects
+			(font
+				(size 1.5 1.5)
+				(thickness 0.3)
+				(bold yes)
+			)
+			(justify left bottom)
+		)
+	)
+	(segment
+		(start 61.73 165.74)
+		(end 61.73 167.23)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "1fdaa57d-5a89-4f73-ba82-06d42fcc7983")
+	)
+	(segment
+		(start 64.27 164.22)
+		(end 64.27 165.77)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "369efa44-a8d0-460e-a4a6-a1c3196512ea")
+	)
+	(segment
+		(start 61.73 167.23)
+		(end 63 168.5)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "746e259b-e89a-40dd-8ec7-88fcd9d0f64d")
+	)
+	(segment
+		(start 63 168.5)
+		(end 68.5 168.5)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "b4acfb98-6140-4c86-8bba-990c2f09fcae")
+	)
+	(segment
+		(start 65.5 167)
+		(end 68.5 167)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "bdc7ac7d-c2fe-4a02-982c-82e88d58a6aa")
+	)
+	(segment
+		(start 64.27 165.77)
+		(end 65.5 167)
+		(width 0.2)
+		(layer "F.Cu")
+		(net 0)
+		(uuid "f2c35900-166a-4284-a4d7-57fa4cedb9d7")
+	)
+	(embedded_fonts no)
+)
diff --git a/hosts/doemini/doemini.kicad_prl b/hosts/doemini/doemini.kicad_prl
new file mode 100644
index 00000000..4be8d8f3
--- /dev/null
+++ b/hosts/doemini/doemini.kicad_prl
@@ -0,0 +1,130 @@
+{
+  "board": {
+    "active_layer": 0,
+    "active_layer_preset": "All Layers",
+    "auto_track_width": true,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 1,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "shapes": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      "vias",
+      "footprint_text",
+      "footprint_anchors",
+      "ratsnest",
+      "grid",
+      "footprints_front",
+      "footprints_back",
+      "footprint_values",
+      "footprint_references",
+      "tracks",
+      "drc_errors",
+      "drawing_sheet",
+      "bitmaps",
+      "pads",
+      "zones",
+      "drc_warnings",
+      "locked_item_shadows",
+      "conflict_shadows",
+      "shapes"
+    ],
+    "visible_layers": "ffffffff_ffffffff_ffffffff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "git": {
+    "repo_type": "",
+    "repo_username": "",
+    "ssh_key": ""
+  },
+  "meta": {
+    "filename": "doemini.kicad_prl",
+    "version": 5
+  },
+  "net_inspector_panel": {
+    "col_hidden": [
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false
+    ],
+    "col_order": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      6,
+      7,
+      8,
+      9
+    ],
+    "col_widths": [
+      156,
+      141,
+      103,
+      71,
+      103,
+      103,
+      103,
+      74,
+      103,
+      103
+    ],
+    "custom_group_rules": [],
+    "expanded_rows": [],
+    "filter_by_net_name": true,
+    "filter_by_netclass": true,
+    "filter_text": "",
+    "group_by_constraint": false,
+    "group_by_netclass": false,
+    "show_unconnected_nets": false,
+    "show_zero_pad_nets": false,
+    "sort_ascending": true,
+    "sorting_column": 0
+  },
+  "open_jobsets": [],
+  "project": {
+    "files": []
+  },
+  "schematic": {
+    "selection_filter": {
+      "graphics": true,
+      "images": true,
+      "labels": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pins": true,
+      "symbols": true,
+      "text": true,
+      "wires": true
+    }
+  }
+}
diff --git a/hosts/doemini/doemini.kicad_pro b/hosts/doemini/doemini.kicad_pro
new file mode 100644
index 00000000..5de265a3
--- /dev/null
+++ b/hosts/doemini/doemini.kicad_pro
@@ -0,0 +1,284 @@
+{
+  "board": {
+    "3dviewports": [],
+    "design_settings": {
+      "defaults": {
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.05,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": true,
+          "text_position": 0,
+          "units_format": 0
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.8,
+          "height": 1.27,
+          "width": 2.54
+        },
+        "silk_line_width": 0.1,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.1,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "creepage": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_to_hole": "warning",
+        "holes_co_located": "warning",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "mirrored_text_on_front_layer": "warning",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "nonmirrored_text_on_back_layer": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_on_edge_cuts": "error",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_angle": "error",
+        "track_dangling": "warning",
+        "track_segment_length": "error",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.5,
+        "min_groove_width": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.0,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.5,
+        "solder_mask_to_copper_clearance": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpthpad": true,
+          "td_onroundshapesonly": false,
+          "td_onsmdpad": true,
+          "td_ontrackend": false,
+          "td_onvia": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [],
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [],
+      "zones_allow_external_fillets": false
+    },
+    "ipc2581": {
+      "dist": "",
+      "distpn": "",
+      "internal_id": "",
+      "mfg": "",
+      "mpn": ""
+    },
+    "layer_pairs": [],
+    "layer_presets": [],
+    "viewports": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "doemini.kicad_pro",
+    "version": 3
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "priority": 2147483647,
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.2,
+        "via_diameter": 0.6,
+        "via_drill": 0.3,
+        "wire_width": 6
+      }
+    ],
+    "meta": {
+      "version": 4
+    },
+    "net_colors": null,
+    "netclass_assignments": null,
+    "netclass_patterns": []
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "plot": "",
+      "pos_files": "",
+      "specctra_dsn": "",
+      "step": "",
+      "svg": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "legacy_lib_dir": "",
+    "legacy_lib_list": []
+  },
+  "sheets": [],
+  "text_variables": {}
+}
diff --git a/hosts/doemini/doemini.kicad_sch b/hosts/doemini/doemini.kicad_sch
new file mode 100644
index 00000000..d2c13f10
--- /dev/null
+++ b/hosts/doemini/doemini.kicad_sch
@@ -0,0 +1,14 @@
+(kicad_sch
+	(version 20250114)
+	(generator "eeschema")
+	(generator_version "9.0")
+	(uuid 76becbd5-08c7-4800-a2ed-3b85a5e64ef1)
+	(paper "A4")
+	(lib_symbols)
+	(sheet_instances
+		(path "/"
+			(page "1")
+		)
+	)
+	(embedded_fonts no)
+)
\ No newline at end of file
diff --git a/hosts/doemini/fp-info-cache b/hosts/doemini/fp-info-cache
new file mode 100644
index 00000000..fe78f138
--- /dev/null
+++ b/hosts/doemini/fp-info-cache
@@ -0,0 +1,102642 @@
+25611199132710310
+Audio_Module
+Reverb_BTDR-1H
+Digital Reverberation Unit, http://www.belton.co.kr/inc/downfile.php?seq=17&file=pdf (footprint from http://www.uk-electronic.de/PDF/BTDR-1.pdf)
+audio belton reverb
+0
+7
+7
+Audio_Module
+Reverb_BTDR-1V
+Digital Reverberation Unit, http://www.belton.co.kr/inc/downfile.php?seq=17&file=pdf (footprint from http://www.uk-electronic.de/PDF/BTDR-1.pdf)
+audio belton reverb
+0
+7
+7
+Battery
+BatteryClip_Keystone_54_D16-19mm
+Battery clip for batteries with a diameter between 16-19 mm: https://www.keyelco.com/product.cfm/product_id/826
+battery clip 18650 18350 17350 CR123A 2/3A
+0
+3
+1
+Battery
+BatteryHolder_Bulgin_BX0034_1xAAA
+Battery holder, Bulgin, BX0034, 1xAAA, screw holes, additional tab connections, https://www.bulgin.com/products/pub/media/import/attachments/Battery_holders.pdf
+horizontal single
+0
+2
+2
+Battery
+BatteryHolder_Bulgin_BX0036_1xC
+Bulgin Battery Holder, BX0036, Battery Type C (https://www.bulgin.com/products/pub/media/bulgin/data/Battery_holders.pdf)
+Bulgin BX0036
+0
+2
+2
+Battery
+BatteryHolder_Bulgin_BX0123_1xCR123
+Battery holder, Bulgin BX0123, battery type 1xCR123 (Script generated with StandardBox.py) (https://www.bulgin.com/products/pub/media/import/attachments/Battery_holders.pdf#page=7)
+horizontal single
+0
+2
+2
+Battery
+BatteryHolder_ComfortableElectronic_CH273-2450_1x2450
+Comfortable Electronic CR2450 battery holder, http://www.comf.com.tw/ProductDetail.asp?no=148
+Comfortable Electronic CR2450
+0
+2
+2
+Battery
+BatteryHolder_Eagle_12BH611-GR
+https://eu.mouser.com/datasheet/2/209/EPD-200766-1274481.pdf
+9V Battery Holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_103_1x20mm
+http://www.keyelco.com/product-pdf.cfm?p=719
+Keystone type 103 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_104_1x23mm
+http://www.keyelco.com/product-pdf.cfm?p=744
+Keystone type 104 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_105_1x2430
+http://www.keyelco.com/product-pdf.cfm?p=745
+Keystone type 105 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_106_1x20mm
+http://www.keyelco.com/product-pdf.cfm?p=720
+Keystone type 106 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_107_1x23mm
+http://www.keyelco.com/product-pdf.cfm?p=746
+Keystone type 107 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_500
+Keystone #500, 12mm CR1220 battery holder, http://www.keyelco.com/product-pdf.cfm?p=710
+CR1220 battery holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_590
+AA CR2 A battery holder with leaf spring, Keystone, https://ken.keyeuro.eu/cat/590.pdf
+AA battery holder Keystone
+0
+3
+1
+Battery
+BatteryHolder_Keystone_1042_1x18650
+Battery holder, Keystone 1042, battery type 1x18650 (Script generated with StandardBox.py) (http://www.keyelco.com/product.cfm/product_id/918)
+horizontal single
+0
+2
+2
+Battery
+BatteryHolder_Keystone_1057_1x2032
+SMT (Auto-In/Ultra-Low) Holder for 2032 Cell, 33.2 x 23.9mm, 2mm height above PCB, https://www.keyelco.com/userAssets/file/M65p4.pdf
+Keystone type 1057 coin cell holder CR2032
+0
+2
+2
+Battery
+BatteryHolder_Keystone_1058_1x2032
+http://www.keyelco.com/product-pdf.cfm?p=14028
+Keystone type 1058 coin cell retainer
+0
+2
+2
+Battery
+BatteryHolder_Keystone_1060_1x2032
+http://www.keyelco.com/product-pdf.cfm?p=726
+CR2032 BR2032 BatteryHolder Battery
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2460_1xAA
+https://www.keyelco.com/product-pdf.cfm?p=1025
+AA battery cell holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2462_2xAA
+2xAA cell battery holder, Keystone P/N 2462, https://www.keyelco.com/product-pdf.cfm?p=1027
+AA battery cell holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2466_1xAAA
+1xAAA Battery Holder, Keystone, Plastic Case, http://www.keyelco.com/product-pdf.cfm?p=1031
+AAA battery holder Keystone
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2468_2xAAA
+2xAAA cell battery holder, Keystone P/N 2468, http://www.keyelco.com/product-pdf.cfm?p=1033
+AAA battery cell holder
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2479_3xAAA
+Battery holder, Keystone 2479, battery type 3xAAA (Script generated with StandardBox.py) (http://www.keyelco.com/product-pdf.cfm?p=1041)
+horizontal triple
+0
+2
+2
+Battery
+BatteryHolder_Keystone_2993
+http://www.keyelco.com/product-pdf.cfm?p=776
+Keystone type 2993 negative battery contact
+0
+1
+1
+Battery
+BatteryHolder_Keystone_2998_1x6.8mm
+www.keyelco.com/product-pdf.cfm?p=763
+Keystone type 2998 battery holder
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3000_1x12mm
+http://www.keyelco.com/product-pdf.cfm?p=777
+Keystone type 3000 coin cell retainer
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3001_1x12mm
+http://www.keyelco.com/product-pdf.cfm?p=778
+Keystone type 3001 coin cell retainer
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3002_1x2032
+https://www.tme.eu/it/Document/a823211ec201a9e209042d155fe22d2b/KEYS2996.pdf
+BR2016 CR2016 DL2016 BR2020 CL2020 BR2025 CR2025 DL2025 DR2032 CR2032 DL2032
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3008_1x2450
+http://www.keyelco.com/product-pdf.cfm?p=786
+Keystone type 3008 coin cell retainer
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3009_1x2450
+http://www.keyelco.com/product-pdf.cfm?p=787
+Keystone type 3009 coin cell retainer
+0
+3
+2
+Battery
+BatteryHolder_Keystone_3034_1x20mm
+Keystone 3034 SMD battery holder for 2020, 2025 and 2032 coincell batteries. http://www.keyelco.com/product-pdf.cfm?p=798
+Keystone type 3034 coin cell retainer
+0
+3
+2
+Battery
+BatteryHolder_LINX_BAT-HLD-012-SMT
+SMT battery holder for CR1216/1220/1225, https://linxtechnologies.com/wp/wp-content/uploads/bat-hld-012-smt.pdf
+battery holder coin cell cr1216 cr1220 cr1225
+0
+3
+2
+Battery
+BatteryHolder_MPD_BA9VPC_1xPP3
+1xPP3 (9V) battery holder, Memory Protection Devices P/N BA9VPC, http://www.memoryprotectiondevices.com/datasheets/BA9VPC-datasheet.pdf
+PP3 Battery Holder BA9VPC 9V
+0
+2
+2
+Battery
+BatteryHolder_MPD_BC2AAPC_2xAA
+2xAA cell battery holder, Memory Protection Devices P/N BC2AAPC, http://www.memoryprotectiondevices.com/datasheets/BC2AAPC-datasheet.pdf
+AA battery cell holder
+0
+2
+2
+Battery
+BatteryHolder_MPD_BC12AAPC_2xAA
+2xAA cell battery holder, Memory Protection Devices P/N BC12AAPC, http://www.memoryprotectiondevices.com/datasheets/BC12AAPC-datasheet.pdf
+AA battery cell holder
+0
+2
+2
+Battery
+BatteryHolder_MPD_BC2003_1x2032
+http://www.memoryprotectiondevices.com/datasheets/BC-2003-datasheet.pdf
+BC2003 CR2032 2032 Battery Holder
+0
+3
+2
+Battery
+BatteryHolder_MPD_BH-18650-PC
+Battery holder, MPD BH-18650, battery type 1x18650 (Script generated with StandardBox.py) (https://www.batteryholders.com/uploads/parts/BH-18650-PC/datasheets/BH-18650-PC-datasheet.pdf)
+horizontal single
+0
+2
+2
+Battery
+BatteryHolder_MPD_BK-18650-PC2
+Battery holder, MPD BK-18650, battery type 1x18650 (Script generated with StandardBox.py) (https://www.batteryholders.com/uploads/parts/BK-18650-PC2/datasheets/BK-18650-PC2-datasheet.pdf)
+horizontal single
+0
+2
+2
+Battery
+BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032
+CR2032 battery holder https://www.lcsc.com/datasheet/lcsc_datasheet_2203021630_MYOUNG-BS-07-A1BJ001_C2979167.pdf
+CR2032 BR2032 BatteryHolder Battery
+0
+2
+2
+Battery
+BatteryHolder_Multicomp_BC-2001_1x2032
+CR2032 retainer clip, SMT ( http://www.farnell.com/datasheets/1505853.pdf )
+BC-2001 CR2032 2032 Battery Holder
+0
+3
+2
+Battery
+BatteryHolder_Renata_SMTU2032-LF_1x2032
+https://www.renata.com/fr/downloads/?product=smtu2032-lf&fileid=6a9833a4d49dfb7b550194fe0f
+Renata SMT battery holder coin cell 2032
+0
+2
+2
+Battery
+BatteryHolder_Seiko_MS621F
+Seiko MS621F, https://www.sii.co.jp/en/me/files/2014/02/file_EXTENDED_PRDCT_SPEC_75_FILE_11.jpg
+Seiko MS621F
+0
+2
+2
+Battery
+BatteryHolder_TruPower_BH-331P_3xAA
+Battery holder, TruPower BH-331P, battery type 3xAA (Script generated with StandardBox.py) (https://static.rapidonline.com/pdf/18-2967_v1.pdf)
+horizontal triple
+0
+2
+2
+Battery
+Battery_CR1225
+CR1225 battery
+battery CR1225 coin cell
+0
+0
+0
+Battery
+Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles
+Panasonic CR-1025/VSK battery
+battery CR-1025 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR1220-VCN_Vertical_CircularHoles
+Panasonic CR-1220/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D140.PDF
+battery CR-1220 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR1632-V1AN_Vertical_CircularHoles
+Panasonic CR-1632-V1AN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D464.PDF
+battery CR-1632 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR2025-V1AK_Vertical_CircularHoles
+Panasonic CR-2025/V1AK battery,
+battery CR-2025 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles
+Panasonic CR-2032/HFN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D166.PDF
+battery CR-2032 coin cell
+0
+2
+2
+Battery
+Battery_Panasonic_CR2032-VS1N_Vertical_CircularHoles
+Panasonic CR-2032/VS1N battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D348.PDF
+battery CR-2032 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR2354-VCN_Vertical_CircularHoles
+Panasonic CR-2354/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D486.PDF
+battery CR-2354/VCN coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR2450-VAN_Vertical_CircularHoles
+Panasonic CR-2450/VAN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D492.PDF
+battery CR-2450 coin cell
+0
+2
+2
+Battery
+Battery_Panasonic_CR2477-VCN_Vertical_CircularHoles
+Panasonic CR-2477/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D502.PDF
+battery CR-2477 coin cell vertical
+0
+2
+2
+Battery
+Battery_Panasonic_CR3032-VCN_Vertical_CircularHoles
+Panasonic CR-3032/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D508.PDF
+battery CR-3032 coin cell vertical
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.00u_PCB
+Cherry MX keyswitch, 1.00u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.00u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.00u_Plate
+Cherry MX keyswitch, 1.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.00u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.25u_PCB
+Cherry MX keyswitch, 1.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.25u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.25u_Plate
+Cherry MX keyswitch, 1.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.25u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.50u_PCB
+Cherry MX keyswitch, 1.50u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.50u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.50u_Plate
+Cherry MX keyswitch, 1.50u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.50u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.75u_PCB
+Cherry MX keyswitch, 1.75u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.75u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_1.75u_Plate
+Cherry MX keyswitch, 1.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 1.75u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.00u_PCB
+Cherry MX keyswitch, 2.00u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.00u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.00u_Plate
+Cherry MX keyswitch, 2.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.00u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.00u_Vertical_PCB
+Cherry MX keyswitch, 2.00u, vertical, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.00u vertical PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.00u_Vertical_Plate
+Cherry MX keyswitch, 2.00u, vertical, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.00u vertical plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.25u_PCB
+Cherry MX keyswitch, 2.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.25u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.25u_Plate
+Cherry MX keyswitch, 2.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.25u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.75u_PCB
+Cherry MX keyswitch, 2.75u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.75u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_2.75u_Plate
+Cherry MX keyswitch, 2.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 2.75u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_6.25u_PCB
+Cherry MX keyswitch, 6.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 6.25u PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_6.25u_Plate
+Cherry MX keyswitch, 6.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch 6.25u plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_ISOEnter_PCB
+Cherry MX keyswitch, ISO Enter, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch ISO enter PCB
+0
+2
+2
+Button_Switch_Keyboard
+SW_Cherry_MX_ISOEnter_Plate
+Cherry MX keyswitch, ISO Enter, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf
+Cherry MX keyswitch ISO enter plate
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_1.00u
+Matias/ALPS keyswitch, 1.00u, http://matias.ca/switches/
+Matias ALPS keyswitch 1.00u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_1.25u
+Matias/ALPS keyswitch, 1.25u, http://matias.ca/switches/
+Matias ALPS keyswitch 1.25u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_1.50u
+Matias/ALPS keyswitch, 1.50u, http://matias.ca/switches/
+Matias ALPS keyswitch 1.50u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_1.75u
+Matias/ALPS keyswitch, 1.75u, http://matias.ca/switches/
+Matias ALPS keyswitch 1.75u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_2.00u
+Matias/ALPS keyswitch, 2.00u, http://matias.ca/switches/
+Matias ALPS keyswitch 2.00u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_2.25u
+Matias/ALPS keyswitch, 2.25u, http://matias.ca/switches/
+Matias ALPS keyswitch 2.25u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_2.75u
+Matias/ALPS keyswitch, 2.75u, http://matias.ca/switches/
+Matias ALPS keyswitch 2.75u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_6.25u
+Matias/ALPS keyswitch, 6.25u, http://matias.ca/switches/
+Matias ALPS keyswitch 6.25u
+0
+2
+2
+Button_Switch_Keyboard
+SW_Matias_ISOEnter
+Matias/ALPS keyswitch, ISO Enter, http://matias.ca/switches/
+Matias ALPS keyswitch ISO enter
+0
+2
+2
+Button_Switch_SMD
+Nidec_Copal_CAS-120A
+Slide Switch, SMD, Nidec CAS series, https://www.nidec-components.com/e/catalog/switch/cas.pdf
+SMD slide switch Nidec CAS 120A 
+0
+3
+3
+Button_Switch_SMD
+Nidec_Copal_SH-7010A
+4-bit rotary coded switch, J-hook, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf
+rotary switch bcd
+0
+6
+5
+Button_Switch_SMD
+Nidec_Copal_SH-7010B
+4-bit rotary coded switch, gull wing, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf
+rotary switch bcd
+0
+6
+5
+Button_Switch_SMD
+Nidec_Copal_SH-7040B
+4-bit rotary coded switch, gull wing, Gray code, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf
+rotary switch bcd
+0
+5
+5
+Button_Switch_SMD
+Panasonic_EVQPUJ_EVQPUA
+http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf
+SMD SMT SPST EVQPUJ EVQPUA
+0
+4
+2
+Button_Switch_SMD
+Panasonic_EVQPUK_EVQPUB
+http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf
+SMD SMT SPST EVQPUK EVQPUB
+0
+4
+2
+Button_Switch_SMD
+Panasonic_EVQPUL_EVQPUC
+http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf
+SMD SMT SPST EVQPUL EVQPUC
+0
+4
+2
+Button_Switch_SMD
+Panasonic_EVQPUM_EVQPUD
+http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf
+SMD SMT SPST EVQPUM EVQPUD
+0
+4
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 1x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile
+SMD 1x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm
+SMD 1x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x4.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin
+SMD 1x-dip-switch SPST Copal_CHS-01A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm
+SMD 1x-dip-switch SPST Copal_CHS-01B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_Copal_CVS-01xB_W5.9mm_P1mm
+SMD 1x-dip-switch SPST Copal_CVS-01xB, Slide, row spacing 5.9 mm (232 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf)
+SMD DIP Switch SPST Slide 5.9mm 232mil
+0
+6
+3
+Button_Switch_SMD
+SW_DIP_SPSTx01_Slide_Omron_A6S-110x_W8.9mm_P2.54mm
+SMD 1x-dip-switch SPST Omron_A6S-110x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+2
+2
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 2x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile
+SMD 2x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_9.78x7.26mm_W8.61mm_P2.54mm
+SMD 2x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x7.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_Copal_CHS-02A_W5.08mm_P1.27mm_JPin
+SMD 2x-dip-switch SPST Copal_CHS-02A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_Copal_CHS-02B_W7.62mm_P1.27mm
+SMD 2x-dip-switch SPST Copal_CHS-02B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_Copal_CVS-02xB_W5.9mm_P1mm
+SMD 2x-dip-switch SPST Copal_CVS-02xB, Slide, row spacing 5.9 mm (232 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf)
+SMD DIP Switch SPST Slide 5.9mm 232mil
+0
+8
+5
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_KingTek_DSHP02TJ_W5.25mm_P1.27mm_JPin
+SMD 2x-dip-switch SPST KingTek_DSHP02TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_KingTek_DSHP02TS_W7.62mm_P1.27mm
+SMD 2x-dip-switch SPST KingTek_DSHP02TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_Omron_A6H-2101_W6.15mm_P1.27mm
+SMD 2x-dip-switch SPST Omron_A6H-2101, Slide, row spacing 6.15 mm (242 mils), body size  (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf)
+SMD DIP Switch SPST Slide 6.15mm 242mil
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx02_Slide_Omron_A6S-210x_W8.9mm_P2.54mm
+SMD 2x-dip-switch SPST Omron_A6S-210x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+4
+4
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_6.7x9.18mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 3x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile
+SMD 3x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_9.78x9.8mm_W8.61mm_P2.54mm
+SMD 3x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x9.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_Copal_CVS-03xB_W5.9mm_P1mm
+SMD 3x-dip-switch SPST Copal_CVS-03xB, Slide, row spacing 5.9 mm (232 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf)
+SMD DIP Switch SPST Slide 5.9mm 232mil
+0
+10
+7
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_KingTek_DSHP03TJ_W5.25mm_P1.27mm_JPin
+SMD 3x-dip-switch SPST KingTek_DSHP03TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_KingTek_DSHP03TS_W7.62mm_P1.27mm
+SMD 3x-dip-switch SPST KingTek_DSHP03TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mm
+SMD 3x-dip-switch SPST Omron_A6S-310x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+6
+6
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_6.7x11.72mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 4x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile
+SMD 4x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm
+SMD 4x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x12.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_Copal_CHS-04A_W5.08mm_P1.27mm_JPin
+SMD 4x-dip-switch SPST Copal_CHS-04A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm
+SMD 4x-dip-switch SPST Copal_CHS-04B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_Copal_CVS-04xB_W5.9mm_P1mm
+SMD 4x-dip-switch SPST Copal_CVS-04xB, Slide, row spacing 5.9 mm (232 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf)
+SMD DIP Switch SPST Slide 5.9mm 232mil
+0
+12
+9
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_KingTek_DSHP04TJ_W5.25mm_P1.27mm_JPin
+SMD 4x-dip-switch SPST KingTek_DSHP04TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_KingTek_DSHP04TS_W7.62mm_P1.27mm
+SMD 4x-dip-switch SPST KingTek_DSHP04TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_Omron_A6H-4101_W6.15mm_P1.27mm
+SMD 4x-dip-switch SPST Omron_A6H-4101, Slide, row spacing 6.15 mm (242 mils), body size  (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf)
+SMD DIP Switch SPST Slide 6.15mm 242mil
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx04_Slide_Omron_A6S-410x_W8.9mm_P2.54mm
+SMD 4x-dip-switch SPST Omron_A6S-410x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+8
+8
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_6.7x14.26mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 5x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_6.7x14.26mm_W8.61mm_P2.54mm_LowProfile
+SMD 5x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_9.78x14.88mm_W8.61mm_P2.54mm
+SMD 5x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x14.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_KingTek_DSHP05TJ_W5.25mm_P1.27mm_JPin
+SMD 5x-dip-switch SPST KingTek_DSHP05TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_KingTek_DSHP05TS_W7.62mm_P1.27mm
+SMD 5x-dip-switch SPST KingTek_DSHP05TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx05_Slide_Omron_A6S-510x_W8.9mm_P2.54mm
+SMD 5x-dip-switch SPST Omron_A6S-510x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+10
+10
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_6.7x16.8mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 6x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_6.7x16.8mm_W8.61mm_P2.54mm_LowProfile
+SMD 6x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_9.78x17.42mm_W8.61mm_P2.54mm
+SMD 6x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x17.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_Copal_CHS-06A_W5.08mm_P1.27mm_JPin
+SMD 6x-dip-switch SPST Copal_CHS-06A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_Copal_CHS-06B_W7.62mm_P1.27mm
+SMD 6x-dip-switch SPST Copal_CHS-06B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_KingTek_DSHP06TJ_W5.25mm_P1.27mm_JPin
+SMD 6x-dip-switch SPST KingTek_DSHP06TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_KingTek_DSHP06TS_W7.62mm_P1.27mm
+SMD 6x-dip-switch SPST KingTek_DSHP06TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_Omron_A6H-6101_W6.15mm_P1.27mm
+SMD 6x-dip-switch SPST Omron_A6H-6101, Slide, row spacing 6.15 mm (242 mils), body size  (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf)
+SMD DIP Switch SPST Slide 6.15mm 242mil
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx06_Slide_Omron_A6S-610x_W8.9mm_P2.54mm
+SMD 6x-dip-switch SPST Omron_A6S-610x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+12
+12
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_6.7x19.34mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 7x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_6.7x19.34mm_W8.61mm_P2.54mm_LowProfile
+SMD 7x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_9.78x19.96mm_W8.61mm_P2.54mm
+SMD 7x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x19.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_KingTek_DSHP07TJ_W5.25mm_P1.27mm_JPin
+SMD 7x-dip-switch SPST KingTek_DSHP07TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_KingTek_DSHP07TS_W7.62mm_P1.27mm
+SMD 7x-dip-switch SPST KingTek_DSHP07TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx07_Slide_Omron_A6S-710x_W8.9mm_P2.54mm
+SMD 7x-dip-switch SPST Omron_A6S-710x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+14
+14
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_6.7x21.88mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 8x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_6.7x21.88mm_W8.61mm_P2.54mm_LowProfile
+SMD 8x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_9.78x22.5mm_W8.61mm_P2.54mm
+SMD 8x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x22.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_Copal_CHS-08A_W5.08mm_P1.27mm_JPin
+SMD 8x-dip-switch SPST Copal_CHS-08A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_Copal_CHS-08B_W7.62mm_P1.27mm
+SMD 8x-dip-switch SPST Copal_CHS-08B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_Copal_CVS-08xB_W5.9mm_P1mm
+SMD 8x-dip-switch SPST Copal_CVS-08xB, Slide, row spacing 5.9 mm (232 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf)
+SMD DIP Switch SPST Slide 5.9mm 232mil
+0
+20
+17
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_KingTek_DSHP08TJ_W5.25mm_P1.27mm_JPin
+SMD 8x-dip-switch SPST KingTek_DSHP08TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_KingTek_DSHP08TS_W7.62mm_P1.27mm
+SMD 8x-dip-switch SPST KingTek_DSHP08TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_Omron_A6H-8101_W6.15mm_P1.27mm
+SMD 8x-dip-switch SPST Omron_A6H-8101, Slide, row spacing 6.15 mm (242 mils), body size  (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf)
+SMD DIP Switch SPST Slide 6.15mm 242mil
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx08_Slide_Omron_A6S-810x_W8.9mm_P2.54mm
+SMD 8x-dip-switch SPST Omron_A6S-810x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+16
+16
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_6.7x24.42mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 9x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_6.7x24.42mm_W8.61mm_P2.54mm_LowProfile
+SMD 9x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_9.78x25.04mm_W8.61mm_P2.54mm
+SMD 9x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x25.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_KingTek_DSHP09TJ_W5.25mm_P1.27mm_JPin
+SMD 9x-dip-switch SPST KingTek_DSHP09TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_KingTek_DSHP09TS_W7.62mm_P1.27mm
+SMD 9x-dip-switch SPST KingTek_DSHP09TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx09_Slide_Omron_A6S-910x_W8.9mm_P2.54mm
+SMD 9x-dip-switch SPST Omron_A6S-910x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+18
+18
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_6.7x26.96mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 10x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_6.7x26.96mm_W8.61mm_P2.54mm_LowProfile
+SMD 10x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_9.78x27.58mm_W8.61mm_P2.54mm
+SMD 10x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x27.58mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_Copal_CHS-10A_W5.08mm_P1.27mm_JPin
+SMD 10x-dip-switch SPST Copal_CHS-10A, Slide, row spacing 5.08 mm (200 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin
+SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_Copal_CHS-10B_W7.62mm_P1.27mm
+SMD 10x-dip-switch SPST Copal_CHS-10B, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD
+SMD DIP Switch SPST Slide 7.62mm 300mil SMD
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_KingTek_DSHP10TJ_W5.25mm_P1.27mm_JPin
+SMD 10x-dip-switch SPST KingTek_DSHP10TJ, Slide, row spacing 5.25 mm (206 mils), body size  (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin
+SMD DIP Switch SPST Slide 5.25mm 206mil JPin
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_KingTek_DSHP10TS_W7.62mm_P1.27mm
+SMD 10x-dip-switch SPST KingTek_DSHP10TS, Slide, row spacing 7.62 mm (300 mils), body size  (see http://www.kingtek.net.cn/pic/201601201417455112.pdf)
+SMD DIP Switch SPST Slide 7.62mm 300mil
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_Omron_A6H-10101_W6.15mm_P1.27mm
+SMD 10x-dip-switch SPST Omron_A6H-10101, Slide, row spacing 6.15 mm (242 mils), body size  (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf)
+SMD DIP Switch SPST Slide 6.15mm 242mil
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx10_Slide_Omron_A6S-1010x_W8.9mm_P2.54mm
+SMD 10x-dip-switch SPST Omron_A6S-1010x, Slide, row spacing 8.9 mm (350 mils), body size  (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf)
+SMD DIP Switch SPST Slide 8.9mm 350mil
+0
+20
+20
+Button_Switch_SMD
+SW_DIP_SPSTx11_Slide_6.7x29.5mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 11x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+22
+22
+Button_Switch_SMD
+SW_DIP_SPSTx11_Slide_6.7x29.5mm_W8.61mm_P2.54mm_LowProfile
+SMD 11x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+22
+22
+Button_Switch_SMD
+SW_DIP_SPSTx11_Slide_9.78x30.12mm_W8.61mm_P2.54mm
+SMD 11x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x30.12mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+22
+22
+Button_Switch_SMD
+SW_DIP_SPSTx12_Slide_6.7x32.04mm_W6.73mm_P2.54mm_LowProfile_JPin
+SMD 12x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin
+SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin
+0
+24
+24
+Button_Switch_SMD
+SW_DIP_SPSTx12_Slide_6.7x32.04mm_W8.61mm_P2.54mm_LowProfile
+SMD 12x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile
+0
+24
+24
+Button_Switch_SMD
+SW_DIP_SPSTx12_Slide_9.78x32.66mm_W8.61mm_P2.54mm
+SMD 12x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x32.66mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD
+SMD DIP Switch SPST Slide 8.61mm 338mil SMD
+0
+24
+24
+Button_Switch_SMD
+SW_DPDT_CK_JS202011JCQN
+Sub-miniature slide switch, vertical, SMT J bend https://dznh3ojzb2azq.cloudfront.net/products/Slide/JS/documents/datasheet.pdf
+switch DPDT SMT
+0
+6
+6
+Button_Switch_SMD
+SW_MEC_5GSH9
+MEC 5G single pole normally-open tactile switch
+switch normally-open pushbutton push-button
+0
+4
+4
+Button_Switch_SMD
+SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010
+Side push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf)
+push horizontal SPST 1P1T
+0
+5
+3
+Button_Switch_SMD
+SW_Push_1P1T-SH_NO_CK_KMR2xxG
+CK components KMR2 tactile switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf
+tactile switch kmr2
+0
+5
+3
+Button_Switch_SMD
+SW_Push_1P1T_NO_CK_KMR2
+CK components KMR2 tactile switch http://www.ckswitches.com/media/1479/kmr2.pdf
+tactile switch kmr2
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1P1T_NO_CK_KSC6xxJ
+CK components KSC6 tactile switch https://www.ckswitches.com/media/1972/ksc6.pdf
+tactile switch ksc6
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1P1T_NO_CK_KSC7xxJ
+CK components KSC7 tactile switch https://www.ckswitches.com/media/1973/ksc7.pdf
+tactile switch ksc7
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR
+C&K Switches 1P1T SMD PTS125 Series 12mm Tact Switch with Pegs, https://www.ckswitches.com/media/1462/pts125.pdf
+Button Tactile Switch SPST 1P1T
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1P1T_NO_Vertical_Wuerth_434133025816
+https://katalog.we-online.com/em/datasheet/434133025816.pdf
+tactile switch Wurth Wuerth
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1P1T_XKB_TS-1187A
+SMD Tactile Switch, http://www.helloxkb.com/public/images/pdf/TS-1187A-X-X-X.pdf
+SPST Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm
+tactile push button, 6x6mm, height=5mm, 12V 50mA, https://datasheet.lcsc.com/lcsc/1811151231_HYP--Hongyuan-Precision-1TS009A-1800-5000-CT_C319409.pdf
+tact sw push 6mm silicone rubber
+0
+2
+2
+Button_Switch_SMD
+SW_Push_SPST_NO_Alps_SKRK
+http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKRK/SKRKAHE020.html
+SMD SMT button
+0
+2
+2
+Button_Switch_SMD
+SW_SP3T_PCM13
+Ultraminiature Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf
+
+0
+8
+4
+Button_Switch_SMD
+SW_SPDT_CK_JS102011SAQN
+Sub-miniature slide switch, right-angle, http://www.ckswitches.com/media/1422/js.pdf
+switch spdt
+0
+3
+3
+Button_Switch_SMD
+SW_SPDT_PCM12
+Ultraminiature Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf
+
+0
+7
+3
+Button_Switch_SMD
+SW_SPDT_REED_MSDM-DT
+Littlefuse 14.73x2.54mm, 175VDC 5W, SPDT Reed Switch MSDM-DT, https://www.littelfuse.com/~/media/electronics/datasheets/reed_switches/littelfuse_reed_switches_mdsm_dt_datasheet.pdf.pdf
+Littlefuse Reed SPDT Switch
+0
+3
+3
+Button_Switch_SMD
+SW_SPST_B3S-1000
+Surface Mount Tactile Switch for High-Density Packaging
+Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_B3S-1100
+Surface Mount Tactile Switch for High-Density Packaging with Ground Terminal
+Tactile Switch
+0
+5
+3
+Button_Switch_SMD
+SW_SPST_B3SL-1002P
+Middle Stroke Tactile Switch, B3SL
+Middle Stroke Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_B3SL-1022P
+Middle Stroke Tactile Switch, B3SL
+Middle Stroke Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_B3U-1000P
+Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss
+Tactile Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_B3U-1000P-B
+Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, with Boss
+Tactile Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_B3U-1100P
+Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, without Boss
+Tactile Switch
+0
+3
+3
+Button_Switch_SMD
+SW_SPST_B3U-1100P-B
+Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, with Boss
+Tactile Switch
+0
+3
+3
+Button_Switch_SMD
+SW_SPST_B3U-3000P
+Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, without Boss
+Tactile Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_B3U-3000P-B
+Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, with Boss
+Tactile Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_B3U-3100P
+Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, with Ground Terminal, without Boss
+Tactile Switch
+0
+3
+3
+Button_Switch_SMD
+SW_SPST_B3U-3100P-B
+Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, with Ground Terminal, with Boss
+Tactile Switch
+0
+3
+3
+Button_Switch_SMD
+SW_SPST_CK_KMS2xxG
+Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm, https://www.ckswitches.com/media/1482/kms.pdf
+Switch SPST KMS2
+0
+5
+3
+Button_Switch_SMD
+SW_SPST_CK_KMS2xxGP
+Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm with pegs, https://www.ckswitches.com/media/1482/kms.pdf
+Switch SPST KMS2
+0
+5
+3
+Button_Switch_SMD
+SW_SPST_CK_KXT3
+https://www.ckswitches.com/media/1465/kxt3.pdf
+Switch SPST KXT3
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_CK_RS282G05A3
+https://www.mouser.com/ds/2/60/RS-282G05A-SM_RT-1159762.pdf
+SPST button tactile switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_EVPBF
+Light Touch Switch
+
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_EVQP0
+Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE28.pdf
+
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_EVQP2
+Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000C374.pdf
+SMD SMT SPST EVQP2
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_EVQP7A
+Light Touch Switch, 2.2 N, https://www3.panasonic.biz/ac/e_download/control/switch/light-touch/catalog/sw_lt_eng_3529s_side.pdf?f_cd=402906
+tactile switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_EVQP7C
+Light Touch Switch, 2.2 N, https://www3.panasonic.biz/ac/e_download/control/switch/light-touch/catalog/sw_lt_eng_3529s_side.pdf?f_cd=402906
+tactile switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_EVQPE1
+Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE7.pdf
+
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_EVQQ2
+Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE28.pdf
+
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_FSMSM
+http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1437566-3&DocType=Customer+Drawing&DocLang=English
+SPST button tactile switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_Omron_B3FS-100xP
+Surface Mount Tactile Switch for High-Density Mounting, 3.1mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf
+Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_Omron_B3FS-101xP
+Surface Mount Tactile Switch for High-Density Mounting, 4.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf
+Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_Omron_B3FS-105xP
+Surface Mount Tactile Switch for High-Density Mounting, 7.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf
+Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_PTS645
+C&K Components SPST SMD PTS645 Series 6mm Tact Switch
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_PTS647_Sx38
+C&K Components SPST SMD PTS647 Series 4.5mm Tact Switch, 3.8mm Height, see https://www.ckswitches.com/media/2567/pts647.pdf
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_PTS647_Sx50
+C&K Components SPST SMD PTS647 Series 4.5mm Tact Switch, 5.0mm Height, see https://www.ckswitches.com/media/2567/pts647.pdf
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_PTS647_Sx70
+C&K Components SPST SMD PTS647 Series 4.5mm Tact Switch, 7.0mm Height, see https://www.ckswitches.com/media/2567/pts647.pdf
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_PTS810
+C&K Components, PTS 810 Series, Microminiature SMT Top Actuated, http://www.ckswitches.com/media/1476/pts810.pdf
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A08
+Light Touch Switch, http://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE3.pdf
+SMD SMT SPST EVQPL EVQPT
+0
+6
+3
+Button_Switch_SMD
+SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A15
+Light Touch Switch, http://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE3.pdf
+SMD SMT SPST EVQPL EVQPT
+0
+6
+3
+Button_Switch_SMD
+SW_SPST_REED_CT05-XXXX-G1
+Coto Technologies SPST Reed Switch CT05-XXXX-G1
+Coto Reed SPST Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_REED_CT05-XXXX-J1
+Coto Technologies SPST Reed Switch CT05-XXXX-J1
+Coto Reed SPST Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_REED_CT10-XXXX-G1
+Coto Technologies SPST Reed Switch CT10-XXXX-G1
+Coto Reed SPST Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_REED_CT10-XXXX-G2
+Coto Technologies SPST Reed Switch CT10-XXXX-G2
+Coto Reed SPST Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_REED_CT10-XXXX-G4
+Coto Technologies SPST Reed Switch CT10-XXXX-G4
+Coto Reed SPST Switch
+0
+2
+2
+Button_Switch_SMD
+SW_SPST_SKQG_WithStem
+ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_SKQG_WithoutStem
+ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, Without stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAEE010.html
+SPST Button Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_TL3305A
+https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf
+TL3305 Series Tact Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_TL3305B
+https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf
+TL3305 Series Tact Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_TL3305C
+https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf
+TL3305 Series Tact Switch
+0
+4
+2
+Button_Switch_SMD
+SW_SPST_TL3342
+Low-profile SMD Tactile Switch, https://www.e-switch.com/system/asset/product_line/data_sheet/165/TL3342.pdf
+SPST Tactile Switch
+0
+4
+2
+Button_Switch_SMD
+SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS
+Tactile switch, SPST, 6.0x3.5 mm, H2.5 mm, straight, NO, gull wing leads: https://www.ckswitches.com/media/2779/pts636.pdf
+switch tactile SPST 1P1T straight NO SMTR C&K
+0
+2
+2
+Button_Switch_THT
+KSA_Tactile_SPST
+KSA http://www.ckswitches.com/media/1457/ksa_ksl.pdf
+SWITCH SMD KSA SW
+0
+5
+5
+Button_Switch_THT
+Nidec_Copal_SH-7010C
+4-bit rotary coded switch, through-hole, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf
+rotary switch bcd
+0
+6
+5
+Button_Switch_THT
+Push_E-Switch_KS01Q01
+E-Switch KS01Q01 http://spec_sheets.e-switch.com/specs/29-KS01Q01.pdf
+Push Button
+0
+4
+4
+Button_Switch_THT
+SW_CK_JS202011AQN_DPDT_Angled
+C&K sub miniature slide switch, JS series, DPDT, right angle, http://www.ckswitches.com/media/1422/js.pdf
+switch DPDT
+0
+6
+6
+Button_Switch_THT
+SW_CK_JS202011CQN_DPDT_Straight
+C&K sub miniature slide switch, JS series, DPDT, right angle, http://www.ckswitches.com/media/1422/js.pdf
+switch DPDT
+0
+6
+6
+Button_Switch_THT
+SW_CW_GPTS203211B
+SPST Off-On Pushbutton, 1A, 30V, CW Industries P/N GPTS203211B, http://switches-connectors-custom.cwind.com/Asset/GPTS203211BR2.pdf
+SPST button switch Off-On
+0
+2
+2
+Button_Switch_THT
+SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm
+1x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x4.1mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+2
+2
+Button_Switch_THT
+SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile
+1x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+2
+2
+Button_Switch_THT
+SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm
+1x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x4.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+2
+2
+Button_Switch_THT
+SW_DIP_SPSTx02_Piano_10.8x6.64mm_W7.62mm_P2.54mm
+2x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x6.64mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+4
+4
+Button_Switch_THT
+SW_DIP_SPSTx02_Piano_CTS_Series194-2MSTN_W7.62mm_P2.54mm
+2x-dip-switch SPST CTS_Series194-2MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+4
+4
+Button_Switch_THT
+SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile
+2x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+4
+4
+Button_Switch_THT
+SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm
+2x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x7.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+4
+4
+Button_Switch_THT
+SW_DIP_SPSTx03_Piano_10.8x9.18mm_W7.62mm_P2.54mm
+3x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x9.18mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+6
+6
+Button_Switch_THT
+SW_DIP_SPSTx03_Piano_CTS_Series194-3MSTN_W7.62mm_P2.54mm
+3x-dip-switch SPST CTS_Series194-3MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+6
+6
+Button_Switch_THT
+SW_DIP_SPSTx03_Slide_6.7x9.18mm_W7.62mm_P2.54mm_LowProfile
+3x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+6
+6
+Button_Switch_THT
+SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm
+3x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x9.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+6
+6
+Button_Switch_THT
+SW_DIP_SPSTx04_Piano_10.8x11.72mm_W7.62mm_P2.54mm
+4x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x11.72mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+8
+8
+Button_Switch_THT
+SW_DIP_SPSTx04_Piano_CTS_Series194-4MSTN_W7.62mm_P2.54mm
+4x-dip-switch SPST CTS_Series194-4MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+8
+8
+Button_Switch_THT
+SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile
+4x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+8
+8
+Button_Switch_THT
+SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm
+4x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x12.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+8
+8
+Button_Switch_THT
+SW_DIP_SPSTx05_Piano_10.8x14.26mm_W7.62mm_P2.54mm
+5x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x14.26mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+10
+10
+Button_Switch_THT
+SW_DIP_SPSTx05_Piano_CTS_Series194-5MSTN_W7.62mm_P2.54mm
+5x-dip-switch SPST CTS_Series194-5MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+10
+10
+Button_Switch_THT
+SW_DIP_SPSTx05_Slide_6.7x14.26mm_W7.62mm_P2.54mm_LowProfile
+5x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+10
+10
+Button_Switch_THT
+SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm
+5x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x14.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+10
+10
+Button_Switch_THT
+SW_DIP_SPSTx06_Piano_10.8x16.8mm_W7.62mm_P2.54mm
+6x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x16.8mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+12
+12
+Button_Switch_THT
+SW_DIP_SPSTx06_Piano_CTS_Series194-6MSTN_W7.62mm_P2.54mm
+6x-dip-switch SPST CTS_Series194-6MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+12
+12
+Button_Switch_THT
+SW_DIP_SPSTx06_Slide_6.7x16.8mm_W7.62mm_P2.54mm_LowProfile
+6x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+12
+12
+Button_Switch_THT
+SW_DIP_SPSTx06_Slide_9.78x17.42mm_W7.62mm_P2.54mm
+6x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x17.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+12
+12
+Button_Switch_THT
+SW_DIP_SPSTx07_Piano_10.8x19.34mm_W7.62mm_P2.54mm
+7x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x19.34mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+14
+14
+Button_Switch_THT
+SW_DIP_SPSTx07_Piano_CTS_Series194-7MSTN_W7.62mm_P2.54mm
+7x-dip-switch SPST CTS_Series194-7MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+14
+14
+Button_Switch_THT
+SW_DIP_SPSTx07_Slide_6.7x19.34mm_W7.62mm_P2.54mm_LowProfile
+7x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+14
+14
+Button_Switch_THT
+SW_DIP_SPSTx07_Slide_9.78x19.96mm_W7.62mm_P2.54mm
+7x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x19.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+14
+14
+Button_Switch_THT
+SW_DIP_SPSTx08_Piano_10.8x21.88mm_W7.62mm_P2.54mm
+8x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x21.88mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+16
+16
+Button_Switch_THT
+SW_DIP_SPSTx08_Piano_CTS_Series194-8MSTN_W7.62mm_P2.54mm
+8x-dip-switch SPST CTS_Series194-8MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+16
+16
+Button_Switch_THT
+SW_DIP_SPSTx08_Slide_6.7x21.88mm_W7.62mm_P2.54mm_LowProfile
+8x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+16
+16
+Button_Switch_THT
+SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm
+8x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x22.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+16
+16
+Button_Switch_THT
+SW_DIP_SPSTx09_Piano_10.8x24.42mm_W7.62mm_P2.54mm
+9x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x24.42mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+18
+18
+Button_Switch_THT
+SW_DIP_SPSTx09_Piano_CTS_Series194-9MSTN_W7.62mm_P2.54mm
+9x-dip-switch SPST CTS_Series194-9MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+18
+18
+Button_Switch_THT
+SW_DIP_SPSTx09_Slide_6.7x24.42mm_W7.62mm_P2.54mm_LowProfile
+9x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+18
+18
+Button_Switch_THT
+SW_DIP_SPSTx09_Slide_9.78x25.04mm_W7.62mm_P2.54mm
+9x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x25.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+18
+18
+Button_Switch_THT
+SW_DIP_SPSTx10_Piano_10.8x26.96mm_W7.62mm_P2.54mm
+10x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x26.96mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+20
+20
+Button_Switch_THT
+SW_DIP_SPSTx10_Piano_CTS_Series194-10MSTN_W7.62mm_P2.54mm
+10x-dip-switch SPST CTS_Series194-10MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+20
+20
+Button_Switch_THT
+SW_DIP_SPSTx10_Slide_6.7x26.96mm_W7.62mm_P2.54mm_LowProfile
+10x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+20
+20
+Button_Switch_THT
+SW_DIP_SPSTx10_Slide_9.78x27.58mm_W7.62mm_P2.54mm
+10x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x27.58mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+20
+20
+Button_Switch_THT
+SW_DIP_SPSTx11_Piano_10.8x29.5mm_W7.62mm_P2.54mm
+11x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x29.5mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+22
+22
+Button_Switch_THT
+SW_DIP_SPSTx11_Piano_CTS_Series194-11MSTN_W7.62mm_P2.54mm
+11x-dip-switch SPST CTS_Series194-11MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+22
+22
+Button_Switch_THT
+SW_DIP_SPSTx11_Slide_6.7x29.5mm_W7.62mm_P2.54mm_LowProfile
+11x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+22
+22
+Button_Switch_THT
+SW_DIP_SPSTx11_Slide_9.78x30.12mm_W7.62mm_P2.54mm
+11x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x30.12mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+22
+22
+Button_Switch_THT
+SW_DIP_SPSTx12_Piano_10.8x32.04mm_W7.62mm_P2.54mm
+12x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x32.04mm
+DIP Switch SPST Piano 7.62mm 300mil
+0
+24
+24
+Button_Switch_THT
+SW_DIP_SPSTx12_Piano_CTS_Series194-12MSTN_W7.62mm_P2.54mm
+12x-dip-switch SPST CTS_Series194-12MSTN, Piano, row spacing 7.62 mm (300 mils), body size  (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf)
+DIP Switch SPST Piano 7.62mm 300mil
+0
+24
+24
+Button_Switch_THT
+SW_DIP_SPSTx12_Slide_6.7x32.04mm_W7.62mm_P2.54mm_LowProfile
+12x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile
+DIP Switch SPST Slide 7.62mm 300mil LowProfile
+0
+24
+24
+Button_Switch_THT
+SW_DIP_SPSTx12_Slide_9.78x32.66mm_W7.62mm_P2.54mm
+12x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x32.66mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf)
+DIP Switch SPST Slide 7.62mm 300mil
+0
+24
+24
+Button_Switch_THT
+SW_E-Switch_EG1224_SPDT_Angled
+E-Switch slide switch, EG series, SPDT, right angle, http://spec_sheets.e-switch.com/specs/P040042.pdf
+switch SPDT
+0
+7
+3
+Button_Switch_THT
+SW_E-Switch_EG1271_SPDT
+E-Switch sub miniature slide switch, EG series, SPDT, https://www.e-switch.com/wp-content/uploads/2022/06/EG.pdf
+switch SPDT
+0
+6
+6
+Button_Switch_THT
+SW_E-Switch_EG2219_DPDT_Angled
+E-Switch slide switch, EG series, DPDT, right angle, http://spec_sheets.e-switch.com/specs/P040170.pdf
+switch DPDT
+0
+10
+6
+Button_Switch_THT
+SW_Lever_1P2T_NKK_GW12LxH
+Switch, single pole double throw, right angle, http://www.nkkswitches.com/pdf/GW.pdf
+switch single-pole double-throw spdt ON-ON horizontal
+0
+5
+3
+Button_Switch_THT
+SW_MEC_5GTH9
+MEC 5G single pole normally-open tactile switch https://cdn.sos.sk/productdata/80/f6/aabf7be6/5gth9358222.pdf
+switch normally-open pushbutton push-button
+0
+4
+2
+Button_Switch_THT
+SW_NKK_BB15AH
+https://www.nkkswitches.com/pdf/Bpushbuttons-1.pdf
+Pushbutton Right-angle
+0
+5
+3
+Button_Switch_THT
+SW_NKK_G1xJP
+Switch NKK G1xJP http://www.nkkswitches.com/pdf/gwillum.pdf
+SWITCH TOGGLE ILLUM SPDT NKK
+0
+6
+6
+Button_Switch_THT
+SW_NKK_GW12LJP
+Switch, single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf
+switch single-pole double-throw spdt ON-ON illuminated LED
+0
+6
+6
+Button_Switch_THT
+SW_NKK_NR01
+NKK Switches NR01 series rotary switch, 10.7 x 10.7mm. https://www.nkkswitches.com/pdf/NR01%20Rotaries.pdf
+NKK NR01 SP3T SP4T SP5T
+0
+10
+7
+Button_Switch_THT
+SW_PUSH-12mm
+Generic SW PUSH 12mm, e.g https://sten-eswitch-13110800-production.s3.amazonaws.com/system/asset/product_line/data_sheet/143/TL1100.pdf
+tact sw push 12mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH-12mm_Wuerth-430476085716
+SW PUSH 12mm http://katalog.we-online.de/em/datasheet/430476085716.pdf
+tact sw push 12mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243
+tactile push button, 6x3.5mm, https://www.apem.com/idec-apem/en_US/PCB-switches/Tactile-Switches/MJTP-6mm-through-hole/c/MJTP_6mm_through%20hole?page=1
+PHAP3362 6mm tact sw THT
+0
+2
+2
+Button_Switch_THT
+SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250
+tactile push button, 6x3.5mm, https://www.apem.com/idec-apem/en_US/PCB-switches/Tactile-Switches/MJTP-6mm-through-hole/c/MJTP_6mm_through%20hole?page=1
+PHAP3362A 6mm tact sw THT
+0
+2
+2
+Button_Switch_THT
+SW_PUSH_6mm
+Generic 6mm SW tactile push button
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H4.3mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H5mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H7.3mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H8.5mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H8mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H9.5mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_6mm_H13mm
+tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm
+tact sw push 6mm
+0
+4
+2
+Button_Switch_THT
+SW_PUSH_E-Switch_FS5700DP_DPDT
+FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf
+switch DPDT footswitch
+0
+6
+6
+Button_Switch_THT
+SW_PUSH_LCD_E3_SAxxxx
+Switch with LCD screen E3 SAxxxx
+switch normally-open pushbutton push-button LCD
+0
+6
+6
+Button_Switch_THT
+SW_PUSH_LCD_E3_SAxxxx_SocketPins
+Switch with LCD screen E3 SAxxxx
+switch normally-open pushbutton push-button LCD
+0
+6
+6
+Button_Switch_THT
+SW_Push_1P1T_NO_LED_E-Switch_TL1250
+illuminated right angle tact switch https://www.e-switch.com/system/asset/product_line/data_sheet/148/TL1250.pdf
+led push switch right angle
+0
+6
+4
+Button_Switch_THT
+SW_Push_1P2T_Vertical_E-Switch_800UDP8P1A1M6
+ right angle SPDT push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf
+IP67 ultra-miniture horizontal
+0
+5
+3
+Button_Switch_THT
+SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2
+momentary / push-push button, h=17.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA1 DPST
+0
+4
+4
+Button_Switch_THT
+SW_Push_2P1T_Toggle_CK_PVA1xxH2xxxxxxV2
+momentary / push-push button, h=23mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA1 DPST
+0
+4
+4
+Button_Switch_THT
+SW_Push_2P1T_Toggle_CK_PVA1xxH3xxxxxxV2
+momentary / push-push button, h=20.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA1 DPST
+0
+4
+4
+Button_Switch_THT
+SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2
+momentary / push-push button, h=15mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA1 DPST
+0
+4
+4
+Button_Switch_THT
+SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2
+momentary / push-push button, h=13mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA2 DPDT
+0
+6
+6
+Button_Switch_THT
+SW_Push_2P2T_Toggle_CK_PVA2xxH1xxxxxxV2
+momentary / push-push button, h=17.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA2 DPDT
+0
+6
+6
+Button_Switch_THT
+SW_Push_2P2T_Toggle_CK_PVA2xxH2xxxxxxV2
+momentary / push-push button, h=23mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA2 DPDT
+0
+6
+6
+Button_Switch_THT
+SW_Push_2P2T_Toggle_CK_PVA2xxH3xxxxxxV2
+momentary / push-push button, h=20.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA2 DPDT
+0
+6
+6
+Button_Switch_THT
+SW_Push_2P2T_Toggle_CK_PVA2xxH4xxxxxxV2
+momentary / push-push button, h=15mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf
+tact sw push PVA2 DPDT
+0
+6
+6
+Button_Switch_THT
+SW_Push_2P2T_Vertical_E-Switch_800UDP8P1A1M6
+ right angle DPDT push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf
+IP67 ultra-miniture horizontal
+0
+8
+6
+Button_Switch_THT
+SW_SPST_Omron_B3F-40xx
+SW_THT_Tactile_Omron_B3F-40xx, 12x12 mm, Through hole switch from the B3F Family manufactured by Omron,  https://www.omron.com/ecb/products/pdf/en-b3f.pdf
+tactile switch THT button push B3F-4000 B3F-4050 B3F-4005 B3F-4055  
+0
+4
+2
+Button_Switch_THT
+SW_SPST_Omron_B3F-50xx
+SW_THT_Tactile_Omron_B3F-50xx, 12x12x7,3 mm, Through hole switch from the B3F Family manufactured by Omron,  https://www.omron.com/ecb/products/pdf/en-b3f.pdf
+tactile omron switch tht B3F-5000 B3F-5050 B3F-5001 B3F-5051  
+0
+4
+2
+Button_Switch_THT
+SW_SPST_Omron_B3F-315x_Angled
+tactile switch, 7.3mm x 6.25mm  x 7.4mm, right angle, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3f.pdf
+tactile switch Omron B3F right angle through hole
+0
+4
+2
+Button_Switch_THT
+SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm
+Wuerth, WS-SLTV, 450301014042, https://www.we-online.com/components/products/datasheet/450301014042.pdf
+switch single-pole opposite-side-connection double-throw SPDT würth wurth
+0
+3
+3
+Button_Switch_THT
+SW_Slide_SPDT_Angled_CK_OS102011MA1Q
+CuK miniature slide switch, OS series, SPDT, right angle, http://www.ckswitches.com/media/1428/os.pdf
+switch SPDT
+0
+5
+3
+Button_Switch_THT
+SW_Slide_SPDT_Straight_CK_OS102011MS2Q
+CuK miniature slide switch, OS series, SPDT, https://www.ckswitches.com/media/1428/os.pdf
+switch SPDT
+0
+5
+3
+Button_Switch_THT
+SW_TH_Tactile_Omron_B3F-10xx
+SW_TH_Tactile_Omron_B3F-10xx_https://www.omron.com/ecb/products/pdf/en-b3f.pdf
+Omron B3F-10xx
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_SKHH_Angled
+tactile switch 6mm ALPS SKHH right angle http://www.alps.com/prod/info/E/HTML/Tact/SnapIn/SKHH/SKHHLUA010.html
+tactile switch 6mm ALPS SKHH right angle
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_SPST_Angled_PTS645Vx31-2LFS
+tactile switch SPST right angle, PTS645VL31-2 LFS
+tactile switch SPST angled PTS645VL31-2 LFS C&K Button
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_SPST_Angled_PTS645Vx39-2LFS
+tactile switch SPST right angle, PTS645VL39-2 LFS
+tactile switch SPST angled PTS645VL39-2 LFS C&K Button
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_SPST_Angled_PTS645Vx58-2LFS
+tactile switch SPST right angle, PTS645VL58-2 LFS
+tactile switch SPST angled PTS645VL58-2 LFS C&K Button
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_SPST_Angled_PTS645Vx83-2LFS
+tactile switch SPST right angle, PTS645VL83-2 LFS
+tactile switch SPST angled PTS645VL83-2 LFS C&K Button
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_Straight_KSA0Axx1LFTR
+SW PUSH SMALL http://www.ckswitches.com/media/1457/ksa_ksl.pdf
+SW PUSH SMALL Tactile C&K
+0
+4
+2
+Button_Switch_THT
+SW_Tactile_Straight_KSL0Axx1LFTR
+SW PUSH SMALL http://www.ckswitches.com/media/1457/ksa_ksl.pdf
+SW PUSH SMALL Tactile C&K
+0
+4
+2
+Button_Switch_THT
+SW_XKB_DM1-16UC-1
+1A 30V SPDT Micro Switch rated for one million cycles, W12.7xD5.7xH6.6, https://www.helloxkb.com/public/images/pdf/DMX-XXXC-X.pdf
+SPDT endstop limit switch clockwise hook lever XKB DM1-16UC-1
+0
+3
+3
+Button_Switch_THT
+SW_XKB_DM1-16UD-1
+1A 30V SPDT Micro Switch rated for one million cycles, W12.7xD5.7xH6.6, https://www.helloxkb.com/public/images/pdf/DMX-XXXD-X.pdf
+SPDT endstop limit switch anti-clockwise hook lever XKB DM1-16UD-1
+0
+3
+3
+Button_Switch_THT
+SW_XKB_DM1-16UP-1
+1A 30V SPDT Micro Switch rated for one million cycles, W12.7xD5.7xH6.6, https://www.helloxkb.com/public/images/pdf/DMX-XXXP-X.pdf
+SPDT endstop limit switch vertical hook lever XKB DM1-16UP-1
+0
+3
+3
+Buzzer_Beeper
+Buzzer_12x9.5RM7.6
+Generic Buzzer, D12mm height 9.5mm with RM7.6mm
+buzzer
+0
+2
+2
+Buzzer_Beeper
+Buzzer_15x7.5RM7.6
+Generic Buzzer, D15mm height 7.5mm with RM7.6mm
+buzzer
+0
+2
+2
+Buzzer_Beeper
+Buzzer_CUI_CPT-9019S-SMT
+https://www.cui.com/product/resource/cpt-9019s-smt.pdf
+buzzer piezo
+0
+2
+2
+Buzzer_Beeper
+Buzzer_D14mm_H7mm_P10mm
+Generic Buzzer, D14mm height 7mm with pitch 10mm
+buzzer
+0
+2
+2
+Buzzer_Beeper
+Buzzer_Mallory_AST1109MLTRQ
+Mallory low-profile piezo buzzer, https://mspindy.com/spec-sheets/AST1109MLTRQ.pdf
+buzzer piezo
+0
+2
+2
+Buzzer_Beeper
+Buzzer_Mallory_AST1240MLQ
+Mallory low-profile piezo buzzer, https://www.mspindy.com/specifications/AST12140MLQ.pdf
+piezo buzzer
+0
+2
+2
+Buzzer_Beeper
+Buzzer_Murata_PKLCS1212E
+Murata Buzzer https://www.murata.com/~/media/webrenewal/support/library/catalog/products/sound/p37e.ashx
+Murata Buzzer Beeper
+0
+2
+2
+Buzzer_Beeper
+Buzzer_Murata_PKMCS0909E
+Murata Buzzer http://www.murata.com/en-us/api/pdfdownloadapi?cate=&partno=PKMCS0909E4000-R1
+Murata Buzzer Beeper
+0
+2
+2
+Buzzer_Beeper
+Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm
+Buzzer, D12.2mm height 6.5mm, https://product.tdk.com/info/en/catalog/datasheets/piezoelectronic_buzzer_ps_en.pdf
+buzzer
+0
+2
+2
+Buzzer_Beeper
+Indicator_PUI_AI-1440-TWT-24V-2-R
+14mm Indicator, https://www.puiaudio.com/media/SpecSheet/AI-1440-TWT-24V-2-R.pdf
+piezo buzzer self drive oscillator
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_CUI_CMT-8504-100-SMT
+magnetic transducer buzzer, 5V, SPL of 100 dB at 10 cm, https://www.cuidevices.com/product/resource/pdf/cmt-8504-100-smt-tr.pdf
+CMT 8504
+0
+4
+4
+Buzzer_Beeper
+MagneticBuzzer_CUI_CST-931RP-A
+CST-931RP-A, http://www.cui.com/product/resource/cst-931rp-a.pdf
+CST-931RP-A
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_Kingstate_KCG0601
+Buzzer, Elektromagnetic Beeper, Summer,
+Kingstate KCG0601 
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_Kobitone_254-EMB73-RO
+MagneticBuzzer_Kobitone_254-EMB73-RO https://www.mouser.es/datasheet/2/209/joytech_11092018_KT-400379-1501513.pdf
+MagneticBuzzer_Kobitone_254-EMB73-RO
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_Kobitone_254-EMB84Q-RO
+MagneticBuzzer Kobitone 254-EMB84Q-RO https://www.mouser.es/datasheet/2/209/KT-400385-1171904.pdf
+MagneticBuzzer Kobitone 254-EMB84Q-RO
+0
+3
+3
+Buzzer_Beeper
+MagneticBuzzer_PUI_AT-0927-TT-6-R
+Buzzer Magnetic 9mm AT-0927-TT-6-R, http://www.puiaudio.com/pdf/AT-0927-TT-6-R.pdf
+Buzzer Magnetic 9mm AT-0927-TT-6-R
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_PUI_SMT-1028-T-2-R
+Buzzer, 2830Hz, 3.6Vpp, 90dbA@10cm, Top sound port, 10x10x3,5mm, https://api.puiaudio.com/file/612539d9-c50b-48de-88aa-b63ef8817a91.pdf
+SMT 1028
+0
+4
+3
+Buzzer_Beeper
+MagneticBuzzer_ProSignal_ABI-009-RC
+Buzzer, Elektromagnetic Beeper, Summer, 6V-DC,
+Pro Signal ABI-009-RC 
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_ProSignal_ABI-010-RC
+Buzzer, Elektromagnetic Beeper, Summer, 12V-DC,
+Pro Signal ABI-010-RC 
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_ProSignal_ABT-410-RC
+Buzzer, Elektromagnetic Beeper, Summer, 1,5V-DC,
+Pro Signal ABT-410-RC 
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_ProjectsUnlimited_AI-4228-TWT-R
+Buzzer, Elektromagnetic Beeper, Summer, 3-28V-DC, https://www.kynix.com/uploadfiles/pdf/AI-4228-TWT-R.pdf
+Projects Unlimited AI-4228-TWT-R 
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_HGP
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_HMB
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_HMB-06_HMB-12
+Buzzer, Elektromagnetic Beeper, Summer,
+Star Micronics HMB-06 HMB-12
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_QMB
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_QMB-105
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_QMB-108
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_QMB-111
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_QMX
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_RMX
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_TMB
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_TMX-F
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+MagneticBuzzer_StarMicronics_TMX-H
+http://datasheet.octopart.com/HMB06-Star-Micronics-datasheet-514145.pdf
+buzzer round tht
+0
+2
+2
+Buzzer_Beeper
+PUIAudio_SMT_0825_S_4_R
+SMD 8540, http://www.puiaudio.com/product-detail.aspx?partnumber=SMT-0825-S-4-R
+SMD 8540
+0
+4
+4
+Buzzer_Beeper
+Speaker_CUI_CMR-1206S-67
+Speaker, 30mW, 300-7000Hz, IP67 face, 12x6x2,25mm, https://www.cuidevices.com/product/resource/cmr-12062s-67.pdf
+speaker CUI
+0
+2
+2
+Calibration_Scale
+Gauge_10mm_Type1_CopperTop
+Gauge, Massstab, 10mm, CopperTop, Type 1,
+Gauge Massstab 10mm CopperTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type1_SilkScreenTop
+Gauge, Massstab, 10mm, SilkScreenTop, Type 1,
+Gauge Massstab 10mm SilkScreenTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type2_CopperTop
+Gauge, Massstab, 10mm, CopperTop, Type 2,
+Gauge Massstab 10mm CopperTop Type 2
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type2_SilkScreenTop
+Gauge, Massstab, 10mm, SilkScreenTop, Type 2,
+Gauge Massstab 10mm SilkScreenTop Type 2
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type3_CopperTop
+Gauge, Massstab, 10mm, CopperTop, Type 3,
+Gauge Massstab 10mm CopperTop Type 3
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type3_SilkScreenTop
+Gauge, Massstab, 10mm, SilkScreenTop, Type 3,
+Gauge Massstab 10mm SilkScreenTop Type 3
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type4_CopperTop
+Gauge, Massstab, 10mm, CopperTop, Type 4,
+Gauge Massstab 10mm CopperTop Type 4
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type4_SilkScreenTop
+Gauge, Massstab, 10mm, SilkScreenTop, Type 4,
+Gauge Massstab 10mm SilkScreenTop Type 4
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type5_CopperTop
+Gauge, Massstab, 10mm, CopperTop, Type 5,
+Gauge Massstab 10mm CopperTop Type 5
+0
+0
+0
+Calibration_Scale
+Gauge_10mm_Type5_SilkScreenTop
+Gauge, Massstab, 10mm, SilkScreenTop, Type 5,
+Gauge Massstab 10mm SilkScreenTop Type 5
+0
+0
+0
+Calibration_Scale
+Gauge_50mm_Type1_CopperTop
+Gauge, Massstab, 50mm, CopperTop, Type 1,
+Gauge Massstab 50mm CopperTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_50mm_Type1_SilkScreenTop
+Gauge, Massstab, 50mm, SilkScreenTop, Type 1,
+Gauge Massstab 50mm SilkScreenTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_50mm_Type2_CopperTop
+Gauge, Massstab, 50mm, CopperTop, Type 2,
+Gauge Massstab 50mm CopperTop Type 2
+0
+0
+0
+Calibration_Scale
+Gauge_50mm_Type2_SilkScreenTop
+Gauge, Massstab, 50mm, SilkScreenTop, Type 2,
+Gauge Massstab 50mm SilkScreenTop Type 2
+0
+0
+0
+Calibration_Scale
+Gauge_100mm_Grid_Type1_CopperTop
+Gauge, Massstab, 100mm, Gitter, Grid, CopperTop, Type 1,
+Gauge Massstab 100mm Gitter Grid CopperTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_100mm_Type1_CopperTop
+Gauge, Massstab, 100mm, CopperTop, Type 1,
+Gauge Massstab 100mm CopperTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_100mm_Type1_SilkScreenTop
+Gauge, Massstab, 100mm, SilkScreenTop, Type 1,
+Gauge Massstab 100mm SilkScreenTop Type 1
+0
+0
+0
+Calibration_Scale
+Gauge_100mm_Type2_CopperTop
+Gauge, Massstab, 100mm, CopperTop, Type 2,
+Gauge Massstab 100mm  CopperTop Type 2
+0
+0
+0
+Calibration_Scale
+Gauge_100mm_Type2_SilkScreenTop
+Gauge, Massstab, 100mm, SilkScreenTop, Type 2,
+Gauge Massstab 100mm SilkScreenTop Type 2
+0
+0
+0
+Capacitor_SMD
+CP_Elec_3x5.3
+SMT capacitor, aluminium electrolytic, 3x5.3, Cornell Dubilier Electronics 
+Capacitor Electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_3x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 3.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x3
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.3
+SMD capacitor, aluminum electrolytic, Vishay, 4.0x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.4
+SMD capacitor, aluminum electrolytic, Panasonic A5 / Nichicon, 4.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 4.0x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.8
+SMD capacitor, aluminum electrolytic, Panasonic, 4.0x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x3
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x4.4
+SMD capacitor, aluminum electrolytic, Panasonic B45, 5.0x4.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.3
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 5.0x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.8
+SMD capacitor, aluminum electrolytic, Panasonic, 5.0x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.9
+SMD capacitor, aluminum electrolytic, Panasonic B6, 5.0x5.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x3
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x4.9
+SMD capacitor, aluminum electrolytic, Panasonic C5, 6.3x4.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.2
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.2mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.3
+SMD capacitor, aluminum electrolytic, Cornell Dubilier, 6.3x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.4
+SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.4_Nichicon
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.8
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.9
+SMD capacitor, aluminum electrolytic, Panasonic C6, 6.3x5.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x7.7
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x7.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x9.9
+SMD capacitor, aluminum electrolytic, Panasonic C10, 6.3x9.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.2
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x6.2mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.5
+SMD capacitor, aluminum electrolytic, Rubycon, 8.0x6.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 8.0x6.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.9
+SMD capacitor, aluminum electrolytic, Panasonic E7, 8.0x6.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x10
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x10.5
+SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x11.9
+SMD capacitor, aluminum electrolytic, Panasonic E12, 8.0x11.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x7.7
+SMD capacitor, aluminum electrolytic, Nichicon, 10.0x7.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x7.9
+SMD capacitor, aluminum electrolytic, Panasonic F8, 10.0x7.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x10
+SMD capacitor, aluminum electrolytic, Nichicon, 10.0x10.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x10.5
+SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x12.5
+SMD capacitor, aluminum electrolytic, Vishay 1012, 10.0x12.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x12.6
+SMD capacitor, aluminum electrolytic, Panasonic F12, 10.0x12.6mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x14.3
+SMD capacitor, aluminum electrolytic, Vishay 1014, 10.0x14.3mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_16x17.5
+SMD capacitor, aluminum electrolytic, Vishay 1616, 16.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_16x22
+SMD capacitor, aluminum electrolytic, Vishay 1621, 16.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_18x17.5
+SMD capacitor, aluminum electrolytic, Vishay 1816, 18.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_18x22
+SMD capacitor, aluminum electrolytic, Vishay 1821, 18.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_CAP-XX_DMF3Zxxxxxxxx3D
+5.5V, 470mF supercapacitor, 45mohm, -40ºC to +70ºC, https://www.cap-xx.com/wp-content/uploads/datasheets/CAP-XX-DMF470mF-Datasheet.pdf
+supercap
+0
+3
+3
+Capacitor_SMD
+C_0201_0603Metric
+Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+capacitor
+0
+4
+2
+Capacitor_SMD
+C_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+4
+2
+Capacitor_SMD
+C_0402_1005Metric
+Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0402_1005Metric_Pad0.74x0.62mm_HandSolder
+Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0504_1310Metric
+Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0504_1310Metric_Pad0.83x1.28mm_HandSolder
+Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0603_1608Metric
+Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0603_1608Metric_Pad1.08x0.95mm_HandSolder
+Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0805_2012Metric
+Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0805_2012Metric_Pad1.18x1.45mm_HandSolder
+Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_01005_0402Metric
+Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+capacitor
+0
+4
+2
+Capacitor_SMD
+C_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+4
+2
+Capacitor_SMD
+C_1206_3216Metric
+Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1206_3216Metric_Pad1.33x1.80mm_HandSolder
+Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1210_3225Metric
+Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1210_3225Metric_Pad1.33x2.70mm_HandSolder
+Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1808_4520Metric
+Capacitor SMD 1808 (4520 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: datasheet page 3, https://product.tdk.com/system/files/dam/doc/product/capacitor/ceramic/mlcc/catalog/mlcc_commercial_soft_en.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1808_4520Metric_Pad1.72x2.30mm_HandSolder
+Capacitor SMD 1808 (4520 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: datasheet page 3, https://product.tdk.com/system/files/dam/doc/product/capacitor/ceramic/mlcc/catalog/mlcc_commercial_soft_en.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1812_4532Metric
+Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1812_4532Metric_Pad1.57x3.40mm_HandSolder
+Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1825_4564Metric
+Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1825_4564Metric_Pad1.57x6.80mm_HandSolder
+Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_2220_5750Metric
+Capacitor SMD 2220 (5750 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_2220_5750Metric_Pad1.97x5.40mm_HandSolder
+Capacitor SMD 2220 (5750 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_2225_5664Metric
+Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_2225_5664Metric_Pad1.80x6.60mm_HandSolder
+Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_3640_9110Metric
+Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_3640_9110Metric_Pad2.10x10.45mm_HandSolder
+Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_Elec_3x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 3.0x5.4mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_4x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.4mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_4x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.8mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_5x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_5x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.8mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.4mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.8mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x7.7
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x7.7mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x5.4mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x6.2
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x6.2mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x10.2
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x10.2mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_10x10.2
+SMD capacitor, aluminum electrolytic nonpolar, 10.0x10.2mm
+capacitor electrolytic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZB4-A
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZB4 TZB4-A
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZB4-B
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZB4 TZB4-A
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZC3
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZC3
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZR1
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZR1
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZW4
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZW4
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZY2
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZY2
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Sprague-Goodman_SGC3
+trimmer capacitor SMD horizontal, http://media.wix.com/ugd/d86717_38d9821e12823a7aa9cef38c6c2a73cc.pdf
+ Sprague Goodman SGC3
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JN
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JN
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JQ
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JQ
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JR
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JR
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JV
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JV
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JZ
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JR
+0
+2
+2
+Capacitor_THT
+CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=10*4.5mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 15mm  length 10mm diameter 4.5mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L10.0mm_D6.0mm_P15.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=10*6mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 15mm  length 10mm diameter 6mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L11.0mm_D5.0mm_P18.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=18mm, length*diameter=11*5mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 18mm  length 11mm diameter 5mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L11.0mm_D6.0mm_P18.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=18mm, length*diameter=11*6mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 18mm  length 11mm diameter 6mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L11.0mm_D8.0mm_P15.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=11*8mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 15mm  length 11mm diameter 8mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L18.0mm_D6.5mm_P25.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=18*6.5mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 25mm  length 18mm diameter 6.5mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L18.0mm_D8.0mm_P25.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=18*8mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 25mm  length 18mm diameter 8mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L18.0mm_D10.0mm_P25.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=18*10mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 25mm  length 18mm diameter 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L20.0mm_D10.0mm_P26.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=26mm, length*diameter=20*10mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 26mm  length 20mm diameter 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L20.0mm_D13.0mm_P26.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=26mm, length*diameter=20*13mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 26mm  length 20mm diameter 13mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L21.0mm_D8.0mm_P28.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=28mm, length*diameter=21*8mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 28mm  length 21mm diameter 8mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L25.0mm_D10.0mm_P30.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=30mm, length*diameter=25*10mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 30mm  length 25mm diameter 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L26.5mm_D20.0mm_P33.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=33mm, length*diameter=26.5*20mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 33mm  length 26.5mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L29.0mm_D10.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=29*10mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 29mm diameter 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L29.0mm_D13.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=29*13mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 29mm diameter 13mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L29.0mm_D16.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=29*16mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 29mm diameter 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L29.0mm_D20.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=29*20mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 29mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L30.0mm_D10.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=30*10mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 30mm diameter 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L30.0mm_D12.5mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=30*12.5mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 30mm diameter 12.5mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L30.0mm_D15.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=30*15mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 30mm diameter 15mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L30.0mm_D18.0mm_P35.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=30*18mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 35mm  length 30mm diameter 18mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L34.5mm_D20.0mm_P41.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=41mm, length*diameter=34.5*20mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 41mm  length 34.5mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L37.0mm_D13.0mm_P43.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=43mm, length*diameter=37*13mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 43mm  length 37mm diameter 13mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L37.0mm_D16.0mm_P43.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=43mm, length*diameter=37*16mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 43mm  length 37mm diameter 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L37.0mm_D20.0mm_P43.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=43mm, length*diameter=37*20mm^2, Electrolytic Capacitor, http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf
+CP Axial series Axial Horizontal pin pitch 43mm  length 37mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L38.0mm_D18.0mm_P44.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=44mm, length*diameter=38*18mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 44mm  length 38mm diameter 18mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L38.0mm_D21.0mm_P44.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=44mm, length*diameter=38*21mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/28325/021asm.pdf
+CP Axial series Axial Horizontal pin pitch 44mm  length 38mm diameter 21mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L40.0mm_D16.0mm_P48.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=48mm, length*diameter=40*16mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 48mm  length 40mm diameter 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.0mm_D23.0mm_P45.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=45mm, length*diameter=42*23.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 45mm  length 42mm diameter 23.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.0mm_D26.0mm_P45.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=45mm, length*diameter=42*26mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 45mm  length 42mm diameter 26mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.0mm_D29.0mm_P45.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=45mm, length*diameter=42*29.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 45mm  length 42mm diameter 29.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.0mm_D32.0mm_P45.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=45mm, length*diameter=42*32.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 45mm  length 42mm diameter 32.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.0mm_D35.0mm_P45.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=45mm, length*diameter=42*35.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 45mm  length 42mm diameter 35.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L42.5mm_D20.0mm_P49.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=49mm, length*diameter=42.5*20mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 49mm  length 42.5mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L46.0mm_D20.0mm_P52.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=52mm, length*diameter=46*20mm^2, Electrolytic Capacitor
+CP Axial series Axial Horizontal pin pitch 52mm  length 46mm diameter 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L55.0mm_D23.0mm_P60.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=60mm, length*diameter=55*23.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 60mm  length 55mm diameter 23.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L55.0mm_D26.0mm_P60.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=60mm, length*diameter=55*26mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 60mm  length 55mm diameter 26mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L55.0mm_D29.0mm_P60.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=60mm, length*diameter=55*29.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 60mm  length 55mm diameter 29.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L55.0mm_D32.0mm_P60.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=60mm, length*diameter=55*32.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 60mm  length 55mm diameter 32.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L55.0mm_D35.0mm_P60.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=60mm, length*diameter=55*35.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 60mm  length 55mm diameter 35.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L67.0mm_D23.0mm_P75.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=75mm, length*diameter=67*23.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 75mm  length 67mm diameter 23.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L67.0mm_D26.0mm_P75.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=75mm, length*diameter=67*26mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 75mm  length 67mm diameter 26mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L67.0mm_D29.0mm_P75.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=75mm, length*diameter=67*29.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 75mm  length 67mm diameter 29.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L67.0mm_D32.0mm_P75.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=75mm, length*diameter=67*32.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 75mm  length 67mm diameter 32.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L67.0mm_D35.0mm_P75.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=75mm, length*diameter=67*35.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 75mm  length 67mm diameter 35.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L80.0mm_D23.0mm_P85.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=85mm, length*diameter=80*23.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 85mm  length 80mm diameter 23.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L80.0mm_D26.0mm_P85.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=85mm, length*diameter=80*26mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 85mm  length 80mm diameter 26mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L80.0mm_D29.0mm_P85.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=85mm, length*diameter=80*29.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 85mm  length 80mm diameter 29.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L80.0mm_D32.0mm_P85.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=85mm, length*diameter=80*32.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 85mm  length 80mm diameter 32.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L80.0mm_D35.0mm_P85.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=85mm, length*diameter=80*35.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 85mm  length 80mm diameter 35.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L93.0mm_D23.0mm_P100.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=100mm, length*diameter=93*23.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 100mm  length 93mm diameter 23.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L93.0mm_D26.0mm_P100.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=100mm, length*diameter=93*26mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 100mm  length 93mm diameter 26mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L93.0mm_D29.0mm_P100.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=100mm, length*diameter=93*29.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 100mm  length 93mm diameter 29.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L93.0mm_D32.0mm_P100.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=100mm, length*diameter=93*32.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 100mm  length 93mm diameter 32.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Axial_L93.0mm_D35.0mm_P100.00mm_Horizontal
+CP, Axial series, Axial, Horizontal, pin pitch=100mm, length*diameter=93*35.0mm^2, Electrolytic Capacitor, http://www.vishay.com/docs/42037/53d.pdf
+CP Axial series Axial Horizontal pin pitch 100mm  length 93mm diameter 35.0mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D4.0mm_P1.50mm
+CP, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=7mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 1.50mm diameter 4mm height 7mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D4.0mm_P2.00mm
+CP, Radial series, Radial, pin pitch=2.00mm, diameter=4mm, height=7mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.00mm diameter 4mm height 7mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D5.0mm_P2.00mm
+CP, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=7mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.00mm diameter 5mm height 7mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D5.0mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=5mm, height=7mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 5mm height 7mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D6.3mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=7mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 6.3mm height 7mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D7.5mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=7.5mm, height=8mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 7.5mm height 8mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D8.0mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=8mm, height=10mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 8mm height 10mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D8.0mm_P3.50mm
+CP, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=12mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 3.50mm diameter 8mm height 12mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D8.0mm_P3.80mm
+CP, Radial series, Radial, pin pitch=3.80mm, diameter=8mm, height=14mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 3.80mm diameter 8mm height 14mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D8.0mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=8mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm diameter 8mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=10mm, height=12mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 10mm height 12mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P2.50mm_P5.00mm
+CP, Radial series, Radial, pin pitch=2.50mm 5.00mm, diameter=10mm, height=12mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm 5.00mm diameter 10mm height 12mm Electrolytic Capacitor
+0
+4
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P3.50mm
+CP, Radial series, Radial, pin pitch=3.50mm, diameter=10mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 3.50mm diameter 10mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P3.80mm
+CP, Radial series, Radial, pin pitch=3.80mm, diameter=10mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 3.80mm diameter 10mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm diameter 10mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P5.00mm_P7.50mm
+CP, Radial series, Radial, pin pitch=5.00mm 7.50mm, diameter=10mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm 7.50mm diameter 10mm height 16mm Electrolytic Capacitor
+0
+4
+2
+Capacitor_THT
+CP_Radial_D10.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=10mm, height=20mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 10mm height 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D12.5mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=12.5mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 12.5mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D12.5mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=12.5mm, height=20mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm diameter 12.5mm height 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D12.5mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=12.5mm, height=24mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 12.5mm height 24mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D13.0mm_P2.50mm
+CP, Radial series, Radial, pin pitch=2.50mm, diameter=13mm, height=16mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 2.50mm diameter 13mm height 16mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D13.0mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=13mm, height=20mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm diameter 13mm height 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D13.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=13mm, height=24mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 13mm height 24mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D14.0mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=14mm, height=20mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 5.00mm diameter 14mm height 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D14.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=14mm, height=20mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 14mm height 20mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D16.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=16mm, height=25mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 16mm height 25mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D17.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=17mm, height=30mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 17mm height 30mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D18.0mm_P7.50mm
+CP, Radial series, Radial, pin pitch=7.50mm, diameter=18mm, height=35mm, Electrolytic Capacitor
+CP Radial series Radial pin pitch 7.50mm diameter 18mm height 35mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D22.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=22mm, height=40mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 22mm height 40mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D22.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=22mm, height=40mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 22mm height 40mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D24.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=24mm, height=40mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 24mm height 40mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D24.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=24mm, height=40mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 24mm height 40mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D25.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=25mm, height=45mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 25mm height 45mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D25.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=25mm, height=45mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 25mm height 45mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D26.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=26mm, height=45mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 26mm height 45mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D26.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=26mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 26mm height 50mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D30.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=30mm, height=45mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 30mm height 45mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D30.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=30mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 30mm height 50mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D35.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=35mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 35mm height 50mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D35.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=35mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 35mm height 50mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_D40.0mm_P10.00mm_3pin_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=40mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 40mm height 50mm Electrolytic Capacitor
+0
+3
+2
+Capacitor_THT
+CP_Radial_D40.0mm_P10.00mm_SnapIn
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=40mm, height=50mm, Electrolytic Capacitor, http://www.vishay.com/docs/28342/058059pll-si.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 40mm height 50mm Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D4.5mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=4.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 4.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D4.5mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=4.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 4.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D5.0mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=5.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 5.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D5.0mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=5.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 5.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D5.5mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=5.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 5.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D5.5mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=5.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 5.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D6.0mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=6.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 6.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D6.0mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=6.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 6.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D7.0mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=7.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 7.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D7.0mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=7.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 7.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D8.0mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=8.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 8.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D8.0mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=8.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 8.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D9.0mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=9.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 9.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D9.0mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=9.0mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 9.0mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D10.5mm_P2.50mm
+CP, Radial_Tantal series, Radial, pin pitch=2.50mm, diameter=10.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 2.50mm diameter 10.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+CP_Radial_Tantal_D10.5mm_P5.00mm
+CP, Radial_Tantal series, Radial, pin pitch=5.00mm, diameter=10.5mm, height=10mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf
+CP Radial_Tantal series Radial pin pitch 5.00mm diameter 10.5mm height 10mm Tantal Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=7.5mm, length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 7.5mm  length 3.8mm diameter 2.6mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=10mm, length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 10mm  length 3.8mm diameter 2.6mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=12.5mm, length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 12.5mm  length 3.8mm diameter 2.6mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L3.8mm_D2.6mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 3.8mm diameter 2.6mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=7.5mm, length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 7.5mm  length 5.1mm diameter 3.1mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L5.1mm_D3.1mm_P10.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=10mm, length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 10mm  length 5.1mm diameter 3.1mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=12.5mm, length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 12.5mm  length 5.1mm diameter 3.1mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 5.1mm diameter 3.1mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=12*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 12mm diameter 6.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D6.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=12*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 12mm diameter 6.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D7.5mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=12*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 12mm diameter 7.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D7.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=12*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 12mm diameter 7.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D8.5mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=12*8.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 12mm diameter 8.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D8.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=12*8.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 12mm diameter 8.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D9.5mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=12*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 12mm diameter 9.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D9.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=12*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 12mm diameter 9.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D10.5mm_P15.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=15mm, length*diameter=12*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 15mm  length 12mm diameter 10.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L12.0mm_D10.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=12*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 12mm diameter 10.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L17.0mm_D6.5mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 17mm diameter 6.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L17.0mm_D6.5mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 17mm diameter 6.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L17.0mm_D7.0mm_P20.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=20mm, length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 20mm  length 17mm diameter 7.0mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L17.0mm_D7.0mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 17mm diameter 7.0mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L19.0mm_D7.5mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=19*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 19mm diameter 7.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L19.0mm_D8.0mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=19*8.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 19mm diameter 8.0mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L19.0mm_D9.0mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=19*9mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 19mm diameter 9mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L19.0mm_D9.5mm_P25.00mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=25mm, length*diameter=19*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 25mm  length 19mm diameter 9.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L22.0mm_D9.5mm_P27.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=27.5mm, length*diameter=22*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 27.5mm  length 22mm diameter 9.5mm
+0
+2
+2
+Capacitor_THT
+C_Axial_L22.0mm_D10.5mm_P27.50mm_Horizontal
+C, Axial series, Axial, Horizontal, pin pitch=27.5mm, length*diameter=22*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf
+C Axial series Axial Horizontal pin pitch 27.5mm  length 22mm diameter 10.5mm
+0
+2
+2
+Capacitor_THT
+C_Disc_D3.0mm_W1.6mm_P2.50mm
+C, Disc series, Radial, pin pitch=2.50mm, diameter*width=3.0*1.6mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 2.50mm diameter 3.0mm width 1.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D3.0mm_W2.0mm_P2.50mm
+C, Disc series, Radial, pin pitch=2.50mm, diameter*width=3*2mm^2, Capacitor
+C Disc series Radial pin pitch 2.50mm diameter 3mm width 2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D3.4mm_W2.1mm_P2.50mm
+C, Disc series, Radial, pin pitch=2.50mm, diameter*width=3.4*2.1mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 2.50mm diameter 3.4mm width 2.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D3.8mm_W2.6mm_P2.50mm
+C, Disc series, Radial, pin pitch=2.50mm, diameter*width=3.8*2.6mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 2.50mm diameter 3.8mm width 2.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D4.3mm_W1.9mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=4.3*1.9mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 5.00mm diameter 4.3mm width 1.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D4.7mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=4.7*2.5mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 5.00mm diameter 4.7mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D5.0mm_W2.5mm_P2.50mm
+C, Disc series, Radial, pin pitch=2.50mm, diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 2.50mm diameter 5mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D5.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 5mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D5.1mm_W3.2mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=5.1*3.2mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf
+C Disc series Radial pin pitch 5.00mm diameter 5.1mm width 3.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D6.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=6*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 6mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D6.0mm_W4.4mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=6*4.4mm^2, Capacitor
+C Disc series Radial pin pitch 5.00mm diameter 6mm width 4.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=7*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 7mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.5mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=7.5*2.5mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.5mm_W4.4mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=7.5*4.4mm^2, Capacitor
+C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 4.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.5mm_W5.0mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.5mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 7.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D7.5mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 7.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D8.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=8*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 8mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D8.0mm_W5.0mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 8mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D8.0mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 8mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D8.0mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 8mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D9.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=9*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 9mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D9.0mm_W5.0mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 9mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D9.0mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 9mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D9.0mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 9mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D10.0mm_W2.5mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=10*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf
+C Disc series Radial pin pitch 5.00mm diameter 10mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D10.5mm_W5.0mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 10.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D10.5mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 10.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D10.5mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 10.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D11.0mm_W5.0mm_P5.00mm
+C, Disc series, Radial, pin pitch=5.00mm, diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 5.00mm diameter 11mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D11.0mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 11mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D11.0mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 11mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D12.0mm_W4.4mm_P7.75mm
+C, Disc series, Radial, pin pitch=7.75mm, diameter*width=12*4.4mm^2, Capacitor
+C Disc series Radial pin pitch 7.75mm diameter 12mm width 4.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D12.5mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 12.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D12.5mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 12.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D14.5mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=14.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 14.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D14.5mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=14.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 14.5mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D16.0mm_W5.0mm_P7.50mm
+C, Disc series, Radial, pin pitch=7.50mm, diameter*width=16.0*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 7.50mm diameter 16.0mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Disc_D16.0mm_W5.0mm_P10.00mm
+C, Disc series, Radial, pin pitch=10.00mm, diameter*width=16.0*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf
+C Disc series Radial pin pitch 10.00mm diameter 16.0mm width 5.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D4.0mm_H5.0mm_P1.50mm
+C, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 1.50mm diameter 4mm height 5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D4.0mm_H7.0mm_P1.50mm
+C, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=7mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 1.50mm diameter 4mm height 7mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D5.0mm_H5.0mm_P2.00mm
+C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.00mm diameter 5mm height 5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D5.0mm_H7.0mm_P2.00mm
+C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=7mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.00mm diameter 5mm height 7mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D5.0mm_H11.0mm_P2.00mm
+C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=11mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.00mm diameter 5mm height 11mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D6.3mm_H5.0mm_P2.50mm
+C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D6.3mm_H7.0mm_P2.50mm
+C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=7mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 7mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D6.3mm_H11.0mm_P2.50mm
+C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=11mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 11mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D8.0mm_H7.0mm_P3.50mm
+C, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=7mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 3.50mm diameter 8mm height 7mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D8.0mm_H11.5mm_P3.50mm
+C, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=11.5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 3.50mm diameter 8mm height 11.5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D10.0mm_H12.5mm_P5.00mm
+C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=12.5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 5.00mm diameter 10mm height 12.5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D10.0mm_H16.0mm_P5.00mm
+C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=16mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 5.00mm diameter 10mm height 16mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D10.0mm_H20.0mm_P5.00mm
+C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=20mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 5.00mm diameter 10mm height 20mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D12.5mm_H20.0mm_P5.00mm
+C, Radial series, Radial, pin pitch=5.00mm, diameter=12.5mm, height=20mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 5.00mm diameter 12.5mm height 20mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D12.5mm_H25.0mm_P5.00mm
+C, Radial series, Radial, pin pitch=5.00mm, diameter=12.5mm, height=25mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 5.00mm diameter 12.5mm height 25mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D16.0mm_H25.0mm_P7.50mm
+C, Radial series, Radial, pin pitch=7.50mm, diameter=16mm, height=25mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 7.50mm diameter 16mm height 25mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D16.0mm_H31.5mm_P7.50mm
+C, Radial series, Radial, pin pitch=7.50mm, diameter=16mm, height=31.5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 7.50mm diameter 16mm height 31.5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Radial_D18.0mm_H35.5mm_P7.50mm
+C, Radial series, Radial, pin pitch=7.50mm, diameter=18mm, height=35.5mm, Non-Polar Electrolytic Capacitor
+C Radial series Radial pin pitch 7.50mm diameter 18mm height 35.5mm Non-Polar Electrolytic Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.0mm_W2.5mm_P2.50mm
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4*2.5mm^2, Capacitor
+C Rect series Radial pin pitch 2.50mm length 4mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4.6*2mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf
+C Rect series Radial pin pitch 2.50mm length 4.6mm width 2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4.6*3.0mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf
+C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.6mm_W3.8mm_P2.50mm_MKS02_FKP02
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4.6*3.8mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf
+C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.6mm_W4.6mm_P2.50mm_MKS02_FKP02
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4.6*4.6mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf
+C Rect series Radial pin pitch 2.50mm length 4.6mm width 4.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L4.6mm_W5.5mm_P2.50mm_MKS02_FKP02
+C, Rect series, Radial, pin pitch=2.50mm, length*width=4.6*5.5mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf
+C Rect series Radial pin pitch 2.50mm length 4.6mm width 5.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W2.0mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*2mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W2.5mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*2.5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mm
+C, Rect series, Radial, pin pitch=2.50mm 5.00mm, length*width=7*3.5mm^2, Capacitor
+C Rect series Radial pin pitch 2.50mm 5.00mm length 7mm width 3.5mm Capacitor
+0
+4
+2
+Capacitor_THT
+C_Rect_L7.0mm_W3.5mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*3.5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 3.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W4.5mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*4.5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 4.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W6.0mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*6mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.0mm_W6.5mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7*6.5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7mm width 6.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*2.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*3.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 3.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*3.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 3.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*4.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 4.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*5.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 5.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 7.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W8.5mm_P5.00mm_FKP2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*8.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 8.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.2mm_W11.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.2*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf
+C Rect series Radial pin pitch 5.00mm length 7.2mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L7.5mm_W6.5mm_P5.00mm
+C, Rect series, Radial, pin pitch=5.00mm, length*width=7.5*6.5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm length 7.5mm width 6.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*2.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W2.6mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*2.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 2.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W2.7mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*2.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 2.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.2mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.3mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.4mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.6mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.8mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W3.9mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*3.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 3.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W4.0mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*4.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 4.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W4.2mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*4.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 4.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W4.9mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*4.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 4.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W5.1mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 5.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W5.7mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*5.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 5.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W6.4mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 6.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W6.7mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*6.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 6.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W7.7mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*7.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 7.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W8.5mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*8.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 8.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W9.5mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*9.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 9.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L9.0mm_W9.8mm_P7.50mm_MKT
+C, Rect series, Radial, pin pitch=7.50mm, length*width=9*9.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 7.50mm length 9mm width 9.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10*2.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10mm width 2.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W3.0mm_P7.50mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10*3mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 7.50mm length 10mm width 3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10*3.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10mm width 3.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W4.0mm_P7.50mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 7.50mm length 10mm width 4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10*4.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10mm width 4.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.0mm_W5.0mm_P5.00mm_P7.50mm
+C, Rect series, Radial, pin pitch=5.00mm 7.50mm, length*width=10*5mm^2, Capacitor
+C Rect series Radial pin pitch 5.00mm 7.50mm length 10mm width 5mm Capacitor
+0
+4
+2
+Capacitor_THT
+C_Rect_L10.3mm_W4.5mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10.3*4.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10.3mm width 4.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.3mm_W5.0mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10.3*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10.3mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.3mm_W5.7mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10.3*5.7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10.3mm width 5.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L10.3mm_W7.2mm_P7.50mm_MKS4
+C, Rect series, Radial, pin pitch=7.50mm, length*width=10.3*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 7.50mm length 10.3mm width 7.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 2.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W3.4mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*3.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 3.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W3.5mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*3.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 3.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W4.2mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*4.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 4.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W4.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*4.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 4.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W5.1mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 5.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W5.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*5.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 5.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W6.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*6.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 6.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W6.4mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 6.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W7.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 7.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.0mm_W8.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.0*8.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.0mm width 8.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W2.0mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W2.6mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*2.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 2.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W2.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 2.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W3.2mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*3.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W3.5mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*3.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W3.6mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W4.0mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*4.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W4.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*4.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W4.5mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*4.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W5.1mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W5.2mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*5.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W5.6mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*5.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W6.4mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W6.6mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*6.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W6.9mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*6.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W7.3mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W7.5mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*7.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W7.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*7.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W8.0mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*8.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 8.0mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W8.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*8.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 8.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W9.5mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*9.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 9.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L11.5mm_W9.8mm_P10.00mm_MKT
+C, Rect series, Radial, pin pitch=10.00mm, length*width=11.5*9.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 10.00mm length 11.5mm width 9.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13*3mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13mm width 3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13mm width 4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.0mm_W6.5mm_P7.50mm_P10.00mm
+C, Rect series, Radial, pin pitch=7.50mm 10.00mm, length*width=13*6.5mm^2, Capacitor
+C Rect series Radial pin pitch 7.50mm 10.00mm length 13mm width 6.5mm Capacitor
+0
+4
+2
+Capacitor_THT
+C_Rect_L13.0mm_W8.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13mm width 8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.5mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13.5*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13.5mm width 4mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L13.5mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4
+C, Rect series, Radial, pin pitch=10.00mm, length*width=13.5*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 10.00mm length 13.5mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W4.7mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*4.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 4.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W4.9mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*4.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 4.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W6.0mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W7.0mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W7.3mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 7.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W8.7mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*8.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 8.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W8.9mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*8.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 8.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W9.0mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W9.2mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*9.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 9.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W10.7mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*10.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 10.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W10.9mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*10.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 10.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W11.2mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*11.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 11.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W11.8mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*11.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 11.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W13.5mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*13.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W13.7mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*13.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L16.5mm_W13.9mm_P15.00mm_MKT
+C, Rect series, Radial, pin pitch=15.00mm, length*width=16.5*13.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L18.0mm_W11.0mm_P15.00mm_FKS3_FKP3
+C, Rect series, Radial, pin pitch=15.00mm, length*width=18*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf
+C Rect series Radial pin pitch 15.00mm length 18mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W5.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W6.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W7.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W8.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W9.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L19.0mm_W11.0mm_P15.00mm_MKS4
+C, Rect series, Radial, pin pitch=15.00mm, length*width=19*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 15.00mm length 19mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W7.0mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W8.3mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*8.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 8.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W8.6mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*8.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 8.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W10.1mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*10.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 10.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W10.3mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*10.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 10.3mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W10.9mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*10.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 10.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W12.2mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*12.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 12.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W12.6mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*12.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 12.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L24.0mm_W12.8mm_P22.50mm_MKT
+C, Rect series, Radial, pin pitch=22.50mm, length*width=24*12.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 22.50mm length 24mm width 12.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W5.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W6.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W7.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 7mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W8.5mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*8.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 8.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*10.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 10.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L26.5mm_W11.5mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=26.5*11.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 26.5mm width 11.5mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L27.0mm_W9.0mm_P22.00mm
+C, Rect series, Radial, pin pitch=22.00mm, length*width=27*9mm^2, Capacitor
+C Rect series Radial pin pitch 22.00mm length 27mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L27.0mm_W9.0mm_P23.00mm
+C, Rect series, Radial, pin pitch=23.00mm, length*width=27*9mm^2, Capacitor
+C Rect series Radial pin pitch 23.00mm length 27mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L27.0mm_W11.0mm_P22.00mm
+C, Rect series, Radial, pin pitch=22.00mm, length*width=27*11mm^2, Capacitor
+C Rect series Radial pin pitch 22.00mm length 27mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L28.0mm_W8.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=28*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 28mm width 8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L28.0mm_W10.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=28*10mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 28mm width 10mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L28.0mm_W12.0mm_P22.50mm_MKS4
+C, Rect series, Radial, pin pitch=22.50mm, length*width=28*12mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 22.50mm length 28mm width 12mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W7.6mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*7.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 7.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W7.8mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*7.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 7.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W7.9mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*7.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 7.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W9.1mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*9.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 9.1mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W9.6mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*9.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 9.6mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W11.0mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*11mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W11.9mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*11.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 11.9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W12.2mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*12.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 12.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W13.0mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*13mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 13mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W13.8mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*13.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 13.8mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W14.2mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*14.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 14.2mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L29.0mm_W16.0mm_P27.50mm_MKT
+C, Rect series, Radial, pin pitch=27.50mm, length*width=29*16mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf
+C Rect series Radial pin pitch 27.50mm length 29mm width 16mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W9.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W11.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W13.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 13mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W15.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 15mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W17.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*17mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 17mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L31.5mm_W20.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=31.5*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 31.5mm width 20mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L32.0mm_W15.0mm_P27.00mm
+C, Rect series, Radial, pin pitch=27.00mm, length*width=32*15mm^2, Capacitor
+C Rect series Radial pin pitch 27.00mm length 32mm width 15mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L33.0mm_W13.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=33*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 33mm width 13mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L33.0mm_W15.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=33*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 33mm width 15mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L33.0mm_W20.0mm_P27.50mm_MKS4
+C, Rect series, Radial, pin pitch=27.50mm, length*width=33*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 27.50mm length 33mm width 20mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W9.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 9mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W11.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 11mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W13.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 13mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W15.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 15mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W17.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*17mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 17mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W19.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*19mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 19mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W20.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 20mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W24.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*24mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 24mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W31.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*31mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 31mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W35.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*35mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 35mm Capacitor
+0
+2
+2
+Capacitor_THT
+C_Rect_L41.5mm_W40.0mm_P37.50mm_MKS4
+C, Rect series, Radial, pin pitch=37.50mm, length*width=41.5*40mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf
+C Rect series Radial pin pitch 37.50mm length 41.5mm width 40mm Capacitor
+0
+2
+2
+Capacitor_THT
+DX_5R5HxxxxU_D11.5mm_P10.00mm
+CP, Radial series, Radial, pin pitch=10.00mm, diameter=11.5mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf
+CP Radial series Radial pin pitch 10.00mm diameter 11.5mm supercapacitor
+0
+2
+2
+Capacitor_THT
+DX_5R5VxxxxU_D11.5mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=11.5mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf
+CP Radial series Radial pin pitch 5.00mm diameter 11.5mm supercapacitor
+0
+2
+2
+Capacitor_THT
+DX_5R5VxxxxU_D19.0mm_P5.00mm
+CP, Radial series, Radial, pin pitch=5.00mm, diameter=19mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf
+CP Radial series Radial pin pitch 5.00mm diameter 19mm supercapacitor
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-1608-08_AVX-J
+Tantalum Capacitor SMD AVX-J (1608-08 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-1608-08_AVX-J_HandSolder
+Tantalum Capacitor SMD AVX-J (1608-08 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-1608-10_AVX-L
+Tantalum Capacitor SMD AVX-L (1608-10 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-1608-10_AVX-L_HandSolder
+Tantalum Capacitor SMD AVX-L (1608-10 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-2012-12_Kemet-R
+Tantalum Capacitor SMD Kemet-R (2012-12 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-2012-12_Kemet-R_HandSolder
+Tantalum Capacitor SMD Kemet-R (2012-12 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-2012-15_AVX-P
+Tantalum Capacitor SMD AVX-P (2012-15 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-2012-15_AVX-P_HandSolder
+Tantalum Capacitor SMD AVX-P (2012-15 Metric), IPC-7352 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-10_Kemet-I
+Tantalum Capacitor SMD Kemet-I (3216-10 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-10_Kemet-I_HandSolder
+Tantalum Capacitor SMD Kemet-I (3216-10 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-12_Kemet-S
+Tantalum Capacitor SMD Kemet-S (3216-12 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-12_Kemet-S_HandSolder
+Tantalum Capacitor SMD Kemet-S (3216-12 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-18_Kemet-A
+Tantalum Capacitor SMD Kemet-A (3216-18 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3216-18_Kemet-A_HandSolder
+Tantalum Capacitor SMD Kemet-A (3216-18 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-12_Kemet-T
+Tantalum Capacitor SMD Kemet-T (3528-12 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-12_Kemet-T_HandSolder
+Tantalum Capacitor SMD Kemet-T (3528-12 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-15_AVX-H
+Tantalum Capacitor SMD AVX-H (3528-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-15_AVX-H_HandSolder
+Tantalum Capacitor SMD AVX-H (3528-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-21_Kemet-B
+Tantalum Capacitor SMD Kemet-B (3528-21 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-3528-21_Kemet-B_HandSolder
+Tantalum Capacitor SMD Kemet-B (3528-21 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-15_Kemet-U
+Tantalum Capacitor SMD Kemet-U (6032-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-15_Kemet-U_HandSolder
+Tantalum Capacitor SMD Kemet-U (6032-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-20_AVX-F
+Tantalum Capacitor SMD AVX-F (6032-20 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-20_AVX-F_HandSolder
+Tantalum Capacitor SMD AVX-F (6032-20 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-28_Kemet-C
+Tantalum Capacitor SMD Kemet-C (6032-28 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-6032-28_Kemet-C_HandSolder
+Tantalum Capacitor SMD Kemet-C (6032-28 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7132-20_AVX-U
+Tantalum Capacitor SMD AVX-U (7132-20 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7132-20_AVX-U_HandSolder
+Tantalum Capacitor SMD AVX-U (7132-20 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7132-28_AVX-C
+Tantalum Capacitor SMD AVX-C (7132-28 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7132-28_AVX-C_HandSolder
+Tantalum Capacitor SMD AVX-C (7132-28 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-15_AVX-R
+Tantalum Capacitor SMD AVX-R (7260-15 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-15_AVX-R_HandSolder
+Tantalum Capacitor SMD AVX-R (7260-15 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-20_AVX-M
+Tantalum Capacitor SMD AVX-M (7260-20 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-20_AVX-M_HandSolder
+Tantalum Capacitor SMD AVX-M (7260-20 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-28_AVX-M
+Tantalum Capacitor SMD AVX-M (7260-28 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-28_AVX-M_HandSolder
+Tantalum Capacitor SMD AVX-M (7260-28 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-38_AVX-R
+Tantalum Capacitor SMD AVX-R (7260-38 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7260-38_AVX-R_HandSolder
+Tantalum Capacitor SMD AVX-R (7260-38 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-15_Kemet-W
+Tantalum Capacitor SMD Kemet-W (7343-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-15_Kemet-W_HandSolder
+Tantalum Capacitor SMD Kemet-W (7343-15 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-20_Kemet-V
+Tantalum Capacitor SMD Kemet-V (7343-20 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-20_Kemet-V_HandSolder
+Tantalum Capacitor SMD Kemet-V (7343-20 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-30_AVX-N
+Tantalum Capacitor SMD AVX-N (7343-30 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-30_AVX-N_HandSolder
+Tantalum Capacitor SMD AVX-N (7343-30 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-31_Kemet-D
+Tantalum Capacitor SMD Kemet-D (7343-31 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-31_Kemet-D_HandSolder
+Tantalum Capacitor SMD Kemet-D (7343-31 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-40_Kemet-Y
+Tantalum Capacitor SMD Kemet-Y (7343-40 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-40_Kemet-Y_HandSolder
+Tantalum Capacitor SMD Kemet-Y (7343-40 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-43_Kemet-X
+Tantalum Capacitor SMD Kemet-X (7343-43 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7343-43_Kemet-X_HandSolder
+Tantalum Capacitor SMD Kemet-X (7343-43 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7360-38_Kemet-E
+Tantalum Capacitor SMD Kemet-E (7360-38 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7360-38_Kemet-E_HandSolder
+Tantalum Capacitor SMD Kemet-E (7360-38 Metric), IPC-7352 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7361-38_AVX-V
+Tantalum Capacitor SMD AVX-V (7361-38 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7361-38_AVX-V_HandSolder
+Tantalum Capacitor SMD AVX-V (7361-38 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7361-438_AVX-U
+Tantalum Capacitor SMD AVX-U (7361-438 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Capacitor_Tantalum_SMD
+CP_EIA-7361-438_AVX-U_HandSolder
+Tantalum Capacitor SMD AVX-U (7361-438 Metric), IPC-7352 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator
+capacitor tantalum
+0
+2
+2
+Connector
+BJB_Pico_46.110.1001_Receptacle_Horizontal
+BJB Pico, single terminal block/receptacle, uninsulated, SMD, 6.9x2.3x2.7mm, https://www.bjb.com/media/7a/b3/df/1740905546/DM-6265102-v6_BJB_Datasheet_46.110.1001-0_SMD_Terminal_block_without_housing_Update_03_2022.PDF
+socket
+0
+5
+1
+Connector
+Banana_Cliff_FCR7350B_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, black, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana black
+0
+1
+1
+Connector
+Banana_Cliff_FCR7350G_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, green, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana green
+0
+1
+1
+Connector
+Banana_Cliff_FCR7350L_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, blue, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana blue
+0
+1
+1
+Connector
+Banana_Cliff_FCR7350N_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, brown, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana brown
+0
+1
+1
+Connector
+Banana_Cliff_FCR7350R_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, red, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana red
+0
+1
+1
+Connector
+Banana_Cliff_FCR7350Y_S16N-PC_Horizontal
+Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, yellow, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf
+cliff 4mm socket jack banana yellow
+0
+1
+1
+Connector
+Banana_Jack_1Pin
+Single banana socket, footprint - 6mm drill
+banana socket
+0
+1
+1
+Connector
+Banana_Jack_2Pin
+Dual banana socket, footprint - 2 x 6mm drills
+banana socket
+0
+2
+2
+Connector
+Banana_Jack_3Pin
+Triple banana socket, footprint - 3 x 6mm drills
+banana socket
+0
+3
+3
+Connector
+CUI_PD-30
+3 pin connector, PD-30, http://www.cui.com/product/resource/pd-30.pdf
+connector 3-pin PD-30 power DIN
+0
+4
+4
+Connector
+CUI_PD-30S
+3-pin nonstandard DIN connector, shielded, PD-30S, http://www.cui.com/product/resource/pd-30s.pdf
+connector 3-pin PD-30S power DIN shielded
+0
+8
+5
+Connector
+CUI_PD-30S_CircularHoles
+3-pin nonstandard DIN connector, shielded, PD-30S, http://www.cui.com/product/resource/pd-30s.pdf
+connector 3-pin PD-30S power DIN shielded
+0
+8
+5
+Connector
+CalTest_CT3151
+Right-angle standard banana jack, http://www.caltestelectronics.com/images/attachments/P315100rH_drawing.pdf
+banana jack horizontal
+0
+4
+1
+Connector
+Conn_C14_Receptacle_RightAngle_Schurter_DD21.01xx
+C14 Power Receptacle https://www.schurter.com/en/datasheet/typ_DD21.pdf
+C14 IEC 250V Schurter
+0
+3
+3
+Connector
+Connector_SFP_and_Cage
+https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=2227302&DocType=Customer+Drawing&DocLang=English
+SFP+ SFP
+0
+40
+21
+Connector
+DTF13-12Px
+http://www.te.com/usa-en/product-DTF13-12PA-G003.html
+DEUTSCH DT header 12 pin 
+0
+12
+12
+Connector
+FanPinHeader_1x03_P2.54mm_Vertical
+3-pin CPU fan Through hole pin header, see http://www.formfactors.org/developer%5Cspecs%5Crev1_2_public.pdf
+pin header 3-pin CPU fan
+0
+3
+3
+Connector
+FanPinHeader_1x04_P2.54mm_Vertical
+4-pin CPU fan Through hole pin header, e.g. for Wieson part number 2366C888-007 Molex 47053-1000, Foxconn HF27040-M1, Tyco 1470947-1 or equivalent, see http://www.formfactors.org/developer%5Cspecs%5Crev1_2_public.pdf
+pin header 4-pin CPU fan
+0
+4
+4
+Connector
+GB042-34S-H10
+http://www.lsmtron.com/pdf/Connector&Antenna_catalog.PDF
+34pin SMD connector 
+0
+34
+34
+Connector
+IHI_B6A-PCB-45_Vertical
+https://lugsdirect.com/PDF_Webprint/B6A-PCB-45-XX(-X).pdf
+connector IHI B6A-PCB-45
+0
+49
+1
+Connector
+JWT_A3963_1x02_P3.96mm_Vertical
+JWT A3963, 3.96mm pitch Pin head connector (http://www.jwt.com.tw/pro_pdf/A3963.pdf)
+connector JWT A3963 pinhead
+0
+2
+2
+Connector
+Joint-Tech_C5080WR-04P_1x04_P5.08mm_Vertical
+C5080 SERIES 90° Wafer, (https://datasheet.lcsc.com/lcsc/1912261836_HR-Joint-Tech-Elec-C5080WR-04P_C477015.pdf)
+connector side-entry ATA PATA IDE 5.25 inch floppy drive power
+0
+6
+5
+Connector
+NS-Tech_Grove_1x04_P2mm_Vertical
+https://statics3.seeedstudio.com/images/opl/datasheet/3470130P1.pdf
+Grove-1x04
+0
+4
+4
+Connector
+OCN_OK-01GM030-04_2x15_P0.4mm_Vertical
+Board to board connector, 2x15, 0.4mm pitch, http://www.main-soul.com/datasheet/ocn/connector/Spec_Draw_OK-01.pdf
+board-to-board
+0
+30
+30
+Connector
+SpringContact_Harwin_S1941-46R
+7.25mm SMT Multi-directional Spring Contact (T+R), https://cdn.harwin.com/pdfs/S1941R.pdf
+spring contact emi emc shield
+0
+1
+1
+Connector
+Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical
+Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2030-IDC.pdf
+tag connect programming header pogo pins
+0
+6
+6
+Connector
+Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical
+Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2030-IDC-NL.pdf
+tag connect programming header pogo pins
+0
+6
+6
+Connector
+Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical
+Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-430%20Datasheet.pdf
+tag connect programming header pogo pins
+0
+10
+10
+Connector
+Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical
+Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-NL%20Datasheet.pdf
+tag connect programming header pogo pins
+0
+10
+10
+Connector
+Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical_with_bottom_clip
+Tag-Connect programming header with bottom courtyard for TC2050-NL Clip board ; https://www.tag-connect.com/wp-content/uploads/bsk-pdf-manager/TC2050-IDC-NL_Datasheet_8.pdf https://www.tag-connect.com/wp-content/uploads/bsk-pdf-manager/TC2050-CLIP_Datasheet_25.pdf
+tag connect programming header pogo pins
+0
+10
+10
+Connector
+Tag-Connect_TC2070-IDC-FP_2x07_P1.27mm_Vertical
+Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2070-IDC%20Datasheet.pdf
+tag connect programming header pogo pins
+0
+14
+14
+Connector_AMASS
+AMASS_MR30PW-FB_1x03_P3.50mm_Horizontal
+Connector MR30 Horizontal PCB Female, https://www.tme.eu/Document/4a6895c4a2c7eddf355b391fd904cb53/MR30PW-FB.pdf
+RC Connector MR30
+0
+5
+3
+Connector_AMASS
+AMASS_MR30PW-M_1x03_P3.50mm_Horizontal
+Connector MR30PW Horizontal PCB Male, https://www.tme.eu/Document/5fffb0d591c3b83b8e9faab5387231c6/MR30PW-M.pdf
+RC Connector MR30PW
+0
+5
+3
+Connector_AMASS
+AMASS_XT30PW-F_1x02_P2.50mm_Horizontal
+Connector XT30 Horizontal PCB Female, https://www.tme.eu/Document/f383737e340bfdab1f665284174b4ea2/XT30PW-F.pdf
+RC Connector XT30
+0
+4
+2
+Connector_AMASS
+AMASS_XT30PW-M_1x02_P2.50mm_Horizontal
+Connector XT30 Horizontal PCB Male, https://www.tme.eu/Document/6eb2005a51a52592b3f19e8a450c54c8/XT30PW-M.pdf
+RC Connector XT30
+0
+4
+2
+Connector_AMASS
+AMASS_XT30U-F_1x02_P5.0mm_Vertical
+Connector XT30 Vertical Cable Female, https://www.tme.eu/Document/f2d0830114aabe6ea8d4bb128e962790/XT30U-F.pdf
+RC Connector XT30
+0
+2
+2
+Connector_AMASS
+AMASS_XT30U-M_1x02_P5.0mm_Vertical
+Connector XT30 Vertical Cable Male, https://www.tme.eu/Document/7d9d972ae3468777f69ec2ee99897652/XT30U-M.pdf
+RC Connector XT30
+0
+2
+2
+Connector_AMASS
+AMASS_XT30UPB-F_1x02_P5.0mm_Vertical
+Connector XT30 Vertical PCB Female, https://www.tme.eu/Document/81f11ca924696756331f21b972812074/XT30PB-F.pdf
+RC Connector XT30
+0
+2
+2
+Connector_AMASS
+AMASS_XT30UPB-M_1x02_P5.0mm_Vertical
+Connector XT30 Vertical PCB Male, https://www.tme.eu/Document/e5863b891432488e7531b3c4468225ac/XT30PB-M.pdf
+RC Connector XT30
+0
+2
+2
+Connector_AMASS
+AMASS_XT60-F_1x02_P7.20mm_Vertical
+AMASS female XT60, through hole, vertical, https://www.tme.eu/Document/2d152ced3b7a446066e6c419d84bb460/XT60%20SPEC.pdf
+XT60 female vertical
+0
+2
+2
+Connector_AMASS
+AMASS_XT60-M_1x02_P7.20mm_Vertical
+AMASS female XT60, through hole, vertical, https://www.tme.eu/Document/2d152ced3b7a446066e6c419d84bb460/XT60%20SPEC.pdf
+XT60 female vertical
+0
+2
+2
+Connector_AMASS
+AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal
+Connector XT60 Horizontal PCB Male, https://www.tme.eu/Document/a5efb91801d38c85c7a1f61518cd6048/XT60IPW-M.pdf
+RC Connector XT60
+0
+5
+3
+Connector_AMASS
+AMASS_XT60PW-F_1x02_P7.20mm_Horizontal
+Connector XT60 Horizontal PCB Female, https://www.tme.eu/Document/1191bc2fa3aee3c446e5a895fd8f7983/XT60PW-F.pdf
+RC Connector XT60
+0
+4
+2
+Connector_AMASS
+AMASS_XT60PW-M_1x02_P7.20mm_Horizontal
+Connector XT60 Horizontal PCB Female, https://www.tme.eu/Document/b13629717d44ae038681dba08d18c0b6/XT60PW-M.pdf
+RC Connector XT60
+0
+4
+2
+Connector_AMASS
+AMASS_XT90PW-M_1x02_P10.90mm_Horizontal
+Connector XT90 Horizontal PCB Male  500V 30A IP40, https://www.bto.pl/pdf/09025/XT90PW-M.pdf
+RC
+0
+4
+3
+Connector_Amphenol
+Amphenol_M8S-03PMMR-SF8001
+M8 Male connector for panel, 90° PCB mount (https://www.amphenolltw.com/2012download/2D%20PDF/03_M%20Series%20Sensor%20Connectors/M8S-XXPMMR-SF8001.pdf)
+three-pin M8
+0
+5
+4
+Connector_Audio
+Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal
+3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cui.com/product/resource/sj-352x-smt-series.pdf)
+3.5mm audio cui horizontal jack stereo
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal
+3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cui.com/product/resource/sj-352x-smt-series.pdf)
+3.5mm audio cui horizontal jack stereo
+0
+4
+4
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3513N_Horizontal
+TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/sj1-351xn.pdf
+TRS audio jack stereo horizontal
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3514N_Horizontal
+TRS 3.5mm, horizontal, through-hole, with tip switch, https://www.cuidevices.com/product/resource/sj1-351xn.pdf
+TRS audio jack stereo horizontal
+0
+4
+4
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3515N_Horizontal
+TRS 3.5mm, horizontal, through-hole, with tip and ring switches, https://www.cuidevices.com/product/resource/sj1-351xn.pdf
+TRS audio jack stereo horizontal
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3523N_Horizontal
+TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf
+TRS audio jack stereo horizontal
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3524N_Horizontal
+TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf
+TRS audio jack stereo horizontal
+0
+4
+4
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3525N_Horizontal
+TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf
+TRS audio jack stereo horizontal
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3533NG_Horizontal
+TRS 3.5mm, horizontal, through-hole, https://www.cui.com/product/resource/sj1-353xng.pdf
+TRS audio jack stereo horizontal
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHoles
+TRS 3.5mm, horizontal, through-hole, , circular holeshttps://www.cui.com/product/resource/sj1-353xng.pdf
+TRS audio jack stereo horizontal circular
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3535NG_Horizontal
+TRS 3.5mm, horizontal, through-hole, with switch, https://www.cui.com/product/resource/sj1-353xng.pdf
+TRS audio jack stereo horizontal
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_CircularHoles
+TRS 3.5mm, horizontal, through-hole, with switch, circular holes, https://www.cui.com/product/resource/sj1-353xng.pdf
+TRS audio jack stereo horizontal circular
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal
+3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cuidevices.com/product/resource/sj2-359x-smt.pdf)
+3.5mm audio cui horizontal jack stereo
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal
+Korean Hroparts Elec PJ-320D-4A (https://datasheet.lcsc.com/lcsc/1810121716_Korean-Hroparts-Elec-PJ-320D-4A_C95562.pdf)
+smt female jack horizontal
+0
+4
+4
+Connector_Audio
+Jack_3.5mm_Ledino_KB3SPRS_Horizontal
+https://www.reichelt.de/index.html?ACTION=7&LA=3&OPEN=0&INDEX=0&FILENAME=C160%252FKB3SPRS.pdf
+jack stereo TRS
+0
+5
+5
+Connector_Audio
+Jack_3.5mm_Lumberg_1503_02_Horizontal
+TRS 3.5mm, horizontal, Surface Mount (SMT), https://downloads.lumberg.com/datenblaetter/en/1503_02.pdf
+TRS audio jack horizontal
+0
+4
+3
+Connector_Audio
+Jack_3.5mm_Lumberg_1503_03_Horizontal
+TRS 3.5mm, horizontal, Surface Mount (SMT), https://downloads.lumberg.com/datenblaetter/en/1503_03.pdf
+TRS audio jack horizontal
+0
+5
+4
+Connector_Audio
+Jack_3.5mm_Lumberg_1503_07_Horizontal
+TRS 3.5mm, horizontal, through-hole, height 5mm, width 6.5mm, https://downloads.lumberg.com/datenblaetter/en/1503_07.pdf
+TRS audio jack horizontal
+0
+4
+3
+Connector_Audio
+Jack_3.5mm_PJ311_Horizontal
+PJ311 6pin SMD 3.5mm stereo headphones jack.
+headphones jack plug stereo 3.5mm PJ311
+0
+6
+6
+Connector_Audio
+Jack_3.5mm_PJ320D_Horizontal
+Headphones with microphone connector, 3.5mm, 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html)
+3.5mm jack mic microphone phones headphones 4pins audio plug
+0
+4
+4
+Connector_Audio
+Jack_3.5mm_PJ320E_Horizontal
+Headphones with microphone connector, 3.5mm, 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320E-177.html)
+3.5mm jack mic microphone phones headphones 4pins audio plug
+0
+5
+4
+Connector_Audio
+Jack_3.5mm_PJ31060-I_Horizontal
+PJ31060-I 6pin SMD 3.5mm headphones jack (http://www.china-bsun.com/Product48/1577.html)
+headphones jack plug stereo 3.5mm PJ31060-I PJ31060
+0
+6
+6
+Connector_Audio
+Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles
+TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html)
+WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu
+0
+3
+3
+Connector_Audio
+Jack_3.5mm_Switronic_ST-005-G_horizontal
+3.5mm horizontal headphones jack, http://akizukidenshi.com/download/ds/switronic/ST-005-G.pdf
+Connector Audio Switronic ST-005-G
+0
+4
+3
+Connector_Audio
+Jack_3.5mm_Technik_TWP-3002_Horizontal
+3.5mm Horizontal Waterproof Stereo Headphones Jack, https://www.technik.com.hk/images/pdf_product/WP3002-PA66-A.pdf
+audio jack stereo horizontal waterproof
+0
+7
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NJ2FD-V_Vertical
+6.35mm (1/4 in) Vertical Jack, Non-switching mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v
+neutrik jack vertical
+0
+2
+2
+Connector_Audio
+Jack_6.35mm_Neutrik_NJ3FD-V_Vertical
+6.35mm (1/4 in) Vertical Jack, Non-switching stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v
+neutrik jack vertical
+0
+3
+3
+Connector_Audio
+Jack_6.35mm_Neutrik_NJ5FD-V_Vertical
+6.35mm (1/4 in) Vertical Jack, 2 x switching (normalling) stereo jack (T/TN/R/RN/S), https://www.neutrik.com/en/product/nj5fd-v
+neutrik jack vertical
+0
+5
+5
+Connector_Audio
+Jack_6.35mm_Neutrik_NJ6FD-V_Vertical
+6.35mm (1/4 in) Vertical Jack, 3 x switching (normalling) stereo jack (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6fd-v
+neutrik jack vertical
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NJ6TB-V_Vertical
+6.35mm (1/4 in) Vertical Jack, 3 x switching (normalling) stereo jack  B-gauge type (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6tb-v
+neutrik jack vertical
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal
+M Series, 6.35mm (1/4in) mono jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj4hcd2
+neutrik jack m
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ4HFD2_Horizontal
+M Series, 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hfd2
+neutrik jack m
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ4HFD3_Horizontal
+M Series, 6.35mm (1/4in) mono jack, switched, with a full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3
+neutrik jack m
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ4HHD2_Horizontal
+M Series, 6.35mm (1/4in) mono jack, switched, with a half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hhd2
+neutrik jack m
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hcd2
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd3
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HFD2-AU_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, full threaded nose, straight PCB pins, gold plated contacts, https://www.neutrik.com/en/product/nmj6hfd2-au
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj6hfd2
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HFD3_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd3
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HFD4_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and fishtail PCB pins, https://www.neutrik.com/en/product/nmj6hfd4
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NMJ6HHD2_Horizontal
+M Series, 6.35mm (1/4in) stereo jack, switched, with half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2
+neutrik jack m
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ3HF-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1
+neutrik jack slim
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ4HF-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1
+neutrik jack slim
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ4HF_Horizontal
+Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj4hf
+neutrik jack slim
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ4HH-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) mono jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1
+neutrik jack slim
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ4HH_Horizontal
+Slim Jacks, 6.35mm (1/4in) mono jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj4hh
+neutrik jack slim
+0
+4
+4
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HF-1-AU_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1-au
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HF-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HF-AU_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf-au
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HF_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HH-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HH-AU_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HH_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hh
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HM-1-AU_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-pre
+neutrik jack slim
+0
+6
+5
+Connector_Audio
+Jack_6.35mm_Neutrik_NRJ6HM-1_Horizontal
+Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1
+neutrik jack slim
+0
+6
+6
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ8HC_Horizontal
+Stacking Jacks, Mono dual jack, full nose, https://www.neutrik.com/en/product/nsj8hc
+neutrik jack stacking
+0
+9
+9
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ8HL_Horizontal
+Stacking Jacks, Mono dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj8hl
+neutrik jack stacking
+0
+9
+9
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ12HC_Horizontal
+Stacking Jacks, Stereo dual jack, full nose, https://www.neutrik.com/en/product/nsj12hc
+neutrik jack stacking
+0
+13
+13
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ12HF-1_Horizontal
+Stacking Jacks, Stereo dual jack, full threaded nose, https://www.neutrik.com/en/product/nsj12hf-1
+neutrik jack stacking
+0
+13
+13
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ12HH-1_Horizontal
+Stacking Jacks, Stereo dual jack, half threaded nose, https://www.neutrik.com/en/product/nsj12hh-1
+neutrik jack stacking
+0
+13
+13
+Connector_Audio
+Jack_6.35mm_Neutrik_NSJ12HL_Horizontal
+Stacking Jacks, Stereo dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj12hl
+neutrik jack stacking
+0
+13
+13
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ5FI-H-0_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj5fi-h-0
+neutrik jack combo i
+0
+6
+6
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ5FI-H_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-h
+neutrik jack combo i
+0
+6
+6
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ5FI-V-0_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj5fi-v-0
+neutrik jack combo i
+0
+6
+6
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ5FI-V_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-v
+neutrik jack combo i
+0
+6
+6
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-H-0_Horizontal
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-h-0
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-H-DA_Horizontal
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-h-da
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-H_Horizontal
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fa-h
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-V-0_Vertical
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-v-0
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-V-DA_Vertical
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-v-da
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FA-V_Vertical
+Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-v
+neutrik jack combo a
+0
+8
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FI-H-0_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fi-h-0
+neutrik jack combo i
+0
+7
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FI-H_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-h
+neutrik jack combo i
+0
+7
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FI-V-0_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fi-v-0
+neutrik jack combo i
+0
+7
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ6FI-V_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-v
+neutrik jack combo i
+0
+7
+7
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ9FI-H-0_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0
+neutrik jack combo i
+0
+10
+10
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ9FI-H_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-h
+neutrik jack combo i
+0
+10
+10
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ9FI-V-0_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj9fi-v-0
+neutrik jack combo i
+0
+10
+10
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ9FI-V_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-v
+neutrik jack combo i
+0
+10
+10
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ10FI-H-0_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj10fi-h-0
+neutrik jack combo i
+0
+11
+11
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ10FI-H_Horizontal
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-h
+neutrik jack combo i
+0
+11
+11
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ10FI-V-0_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj10fi-v-0
+neutrik jack combo i
+0
+11
+11
+Connector_Audio
+Jack_XLR-6.35mm_Neutrik_NCJ10FI-V_Vertical
+Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v
+neutrik jack combo i
+0
+11
+11
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH-0_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH1-0_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah1-0
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH1-DA_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faah1-da
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH1_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah1
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH2-0_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah2-0
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH2_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah2
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAH_Horizontal
+AA Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV-0_Vertical
+AA Series, 3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav-0
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV1-0_Vertical
+AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav1-0
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV1-DA_Vertical
+AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faav1-da
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV1_Vertical
+AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav1
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV2-0_Vertical
+AA Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav2-0
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV2_Vertical
+AA Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav2
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAAV_Vertical
+AA Series, 3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH1-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah1-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH1-DA_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah1-da
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH1_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah1
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH2-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah2-0
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH2-DA_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah2-da
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH2_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah2
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHL-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHL1-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHL1_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3fahl1
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHR-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHR1-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr1-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHR1_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fahr1
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHR2-0_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAHR2_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fahr2
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAH_Horizontal
+A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV-0_Vertical
+A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV1-0_Vertical
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav1-0
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV1-DA_Vertical
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fav1-da
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV1_Vertical
+A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav1
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV2-0_Vertical
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav2-0
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV2-DA_Vertical
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fav2-da
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV2_Vertical
+A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav2
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FAV_Vertical
+A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH1-B_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh1-b
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH1-DA_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH1-E_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH1_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh1
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH2-B_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh2-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH2-DA_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh2-da
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH2-E_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh2-e
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBH2_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh2
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBHL1_Horizontal
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3fbhl1
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV1-0_Vertical
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring, no latch, https://www.neutrik.com/en/product/nc3fbv1-0
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV1-B_Vertical
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv1-b
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV1-DA_Vertical
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV1_Vertical
+B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv1
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV2-B_Vertical
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv2-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV2-DA_Vertical
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv2-da
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV2-SW_Vertical
+B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv2-sw
+neutrik xlr b
+0
+7
+7
+Connector_Audio
+Jack_XLR_Neutrik_NC3FBV2_Vertical
+B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv2
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAH-0_Horizontal
+AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-0
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAH-1_Horizontal
+AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-1
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAH_Horizontal
+AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAV-0_Vertical
+AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav-0
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAV-1_Vertical
+AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav-1
+neutrik xlr aa
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAAV_Vertical
+AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav
+neutrik xlr aa
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAFH-PH_Horizontal
+A Series, Chassis connector H female (A series layout), mates with Phoenix MSTB2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mafh-ph
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAH-0_Horizontal
+A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah-0
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAHL_Horizontal
+A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mahl
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAHR_Horizontal
+A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3mahr
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAH_Horizontal
+A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAMH-PH_Horizontal
+A Series, Chassis connector Phoenix H male (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mamh-ph
+neutrik xlr a
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAV-0_Vertical
+A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav-0
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MAV_Vertical
+A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav
+neutrik xlr a
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBH-0_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh-0
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBH-1_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh-1
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBH-B_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBH-E_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbh-e
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBHL-B_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral left PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhl-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBHL_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mbhl
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBHR-B_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhr-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBHR_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount, https://www.neutrik.com/en/product/nc3mbhr
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBH_Horizontal
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV-0_Vertical
+B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-0
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV-1_Vertical
+B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-1
+neutrik xlr b
+0
+3
+3
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV-B_Vertical
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbv-b
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV-E_Vertical
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbv-e
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV-SW_Vertical
+B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-sw
+neutrik xlr b
+0
+7
+7
+Connector_Audio
+Jack_XLR_Neutrik_NC3MBV_Vertical
+B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv
+neutrik xlr b
+0
+4
+4
+Connector_Audio
+Jack_XLR_Neutrik_NC4FAH-0_Horizontal
+A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc4fah-0
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4FAH_Horizontal
+A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fah
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4FAV-0_Vertical
+A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc4fav-0
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4FAV_Vertical
+A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4fav
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4FBH_Horizontal
+B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fbh
+neutrik xlr b
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4FBV_Vertical
+B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4fbv
+neutrik xlr b
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4MAH_Horizontal
+A Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mah
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4MAV_Vertical
+A Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mav
+neutrik xlr a
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4MBH_Horizontal
+B Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mbh
+neutrik xlr b
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC4MBV_Vertical
+B Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbv
+neutrik xlr b
+0
+5
+5
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAH-0_Horizontal
+A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc5fah-0
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAH-DA_Horizontal
+A Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fah-da
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAH_Horizontal
+A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fah
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAV-DA_Vertical
+A Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fav-da
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAV-SW_Vertical
+A Series, 5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible, https://www.neutrik.com/en/product/nc5fav-sw
+neutrik xlr a
+0
+9
+9
+Connector_Audio
+Jack_XLR_Neutrik_NC5FAV_Vertical
+A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fav
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FBH-B_Horizontal
+B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbh-b
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FBH_Horizontal
+B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fbh
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FBV-B_Vertical
+B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbv-b
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5FBV-SW_Vertical
+B Series, 5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv-sw
+neutrik xlr b
+0
+9
+9
+Connector_Audio
+Jack_XLR_Neutrik_NC5FBV_Vertical
+B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MAH_Horizontal
+A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mah
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MAV-SW_Vertical
+A Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mav-sw
+neutrik xlr a
+0
+9
+9
+Connector_Audio
+Jack_XLR_Neutrik_NC5MAV_Vertical
+A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mav
+neutrik xlr a
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MBH-B_Horizontal
+B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbh-b
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MBH_Horizontal
+B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mbh
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MBV-B_Vertical
+B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbv-b
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_XLR_Neutrik_NC5MBV-SW_Vertical
+B Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv-sw
+neutrik xlr b
+0
+9
+9
+Connector_Audio
+Jack_XLR_Neutrik_NC5MBV_Vertical
+B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv
+neutrik xlr b
+0
+6
+6
+Connector_Audio
+Jack_speakON-6.35mm_Neutrik_NLJ2MDXX-H_Horizontal
+speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) jack receptacle, horizontal pcb mount, replaces NLJ2MD-H, https://www.neutrik.com/en/product/nlj2mdxx-h
+neutrik speakon combo
+0
+2
+2
+Connector_Audio
+Jack_speakON-6.35mm_Neutrik_NLJ2MDXX-V_Vertical
+speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) jack receptacle, vertical pcb mount, replaces NLJ2MD-V, https://www.neutrik.com/en/product/nlj2mdxx-v
+neutrik speakon combo
+0
+2
+2
+Connector_Audio
+Jack_speakON_Neutrik_NL2MDXX-H-3_Horizontal
+speakON Chassis Connectors, 2 pole chassis connector, gray D-size flange, countersunk thru holes, horizontal PCB, replaces NL2MD-H, https://www.neutrik.com/en/product/nl2mdxx-h-3
+neutrik speakon
+0
+2
+2
+Connector_Audio
+Jack_speakON_Neutrik_NL2MDXX-V_Vertical
+speakON Chassis Connectors, 2 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v
+neutrik speakon
+0
+2
+2
+Connector_Audio
+Jack_speakON_Neutrik_NL4MDXX-H-2_Horizontal
+speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), horizontal PCB mount, replaces NL4MD-H-2, https://www.neutrik.com/en/product/nl4mdxx-h-2
+neutrik speakon
+0
+4
+4
+Connector_Audio
+Jack_speakON_Neutrik_NL4MDXX-H-3_Horizontal
+speakON Chassis Connectors, 4 pole chassis connector, grey D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, replaces NL4MD-H, NL4MD-H-1, NL4MD-H-3, https://www.neutrik.com/en/product/nl4mdxx-h-3
+neutrik speakon
+0
+4
+4
+Connector_Audio
+Jack_speakON_Neutrik_NL4MDXX-V-2_Vertical
+speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2
+neutrik speakon
+0
+4
+4
+Connector_Audio
+Jack_speakON_Neutrik_NL4MDXX-V-3_Vertical
+speakON Chassis Connectors, 4 pole chassis connector, grey D-size flange, self tapping screw holes (A-screw), vertical PCB mount, replaces NL4MD-V-1, https://www.neutrik.com/en/product/nl4mdxx-v-3
+neutrik speakon
+0
+4
+4
+Connector_Audio
+Jack_speakON_Neutrik_NL4MDXX-V_Vertical
+speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, replaces NL4MD-V, NL4MD-V-R, NL4MD-V-S, https://www.neutrik.com/en/product/nl4mdxx-v
+neutrik speakon
+0
+4
+4
+Connector_Audio
+Jack_speakON_Neutrik_NL8MDXX-V-3_Vertical
+speakON Chassis Connectors, 8 pole chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), vertical PCB mount, replaces NL8MD-V-1, https://www.neutrik.com/en/product/nl8mdxx-v-3
+neutrik speakon
+0
+8
+8
+Connector_Audio
+Jack_speakON_Neutrik_NL8MDXX-V_Vertical
+speakON Chassis Connectors, 8 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, vertical PCB mount, replaces NL8MD-V, https://www.neutrik.com/en/product/nl8mdxx-v
+neutrik speakon
+0
+8
+8
+Connector_Audio
+Jack_speakON_Neutrik_NLT4MD-V_Vertical
+STX Series, 4 pole male chassis connector, metal housing, vertical PCB mount,  self tapping screw holes (A-screw), https://www.neutrik.com/en/product/nlt4md-v
+neutrik speakon stx
+0
+4
+4
+Connector_Audio
+MiniXLR-5_Switchcraft_TRAPC_Horizontal
+http://www.switchcraft.com/ProductSummary.aspx?Parent=620 http://www.switchcraft.com/Drawings/TRAPC_X-TRASM_X_SERIES_CD.PDF
+THT Mini XLR 5Pin right angle
+0
+5
+5
+Connector_Audio
+Plug_3.5mm_CUI_SP-3541
+4 contacts, 3.5mm audio plug, https://www.cuidevices.com/product/resource/pdf/sp-3541.pdf
+3.5mm plug TRRS
+0
+4
+4
+Connector_BarrelJack
+BarrelJack_CLIFF_FC681465S_SMT_Horizontal
+Surface-mount DC Barrel Jack, https://www.cliffuk.co.uk/products/dcconnectors/FC681465S.pdf
+Power Jack SMT
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_CUI_PJ-036AH-SMT_Horizontal
+Surface-mount DC Barrel Jack, http://www.cui.com/product/resource/pj-036ah-smt.pdf
+Power Jack SMT
+0
+3
+3
+Connector_BarrelJack
+BarrelJack_CUI_PJ-063AH_Horizontal
+Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf
+barrel jack cui dc power
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles
+Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf
+barrel jack cui dc power
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_CUI_PJ-079BH_Horizontal
+Barrel Jack, 2.5mm ID, 5.5mm OD, 24V, 5A, switch, https://www.cui.com/product/resource/pj-079bh.pdf 
+barrel jack cui dc power
+0
+5
+4
+Connector_BarrelJack
+BarrelJack_CUI_PJ-102AH_Horizontal
+Thin-pin DC Barrel Jack, https://cdn-shop.adafruit.com/datasheets/21mmdcjackDatasheet.pdf
+Power Jack
+0
+3
+3
+Connector_BarrelJack
+BarrelJack_GCT_DCJ200-10-A_Horizontal
+Barrel jack connector (5.5 mm outer diameter, 2.05 inner diameter ), https://gct.co/files/drawings/dcj200-10.pdf
+connector barrel jack
+0
+3
+3
+Connector_BarrelJack
+BarrelJack_Horizontal
+DC Barrel Jack
+Power Jack
+0
+3
+3
+Connector_BarrelJack
+BarrelJack_Kycon_KLDX-0202-xC_Horizontal
+DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf
+power jack 2mm 2.5mm KLDX-0202-BC KLDX-0202-AC
+0
+3
+3
+Connector_BarrelJack
+BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal
+DC Power Jack, 13A, 24V, Panel Mount,Through-hole, https://www.switchcraft.com/Drawings/RAPC10U_CD.pdf
+barreljack switchcraftconxall dc power
+0
+2
+2
+Connector_BarrelJack
+BarrelJack_Wuerth_694102107102_1.0x3.9mm
+Wuerth Elektronik barrel jack connector, SMD, 3.9mm OD, 1.0mm ID, with switch, 18V, 5A, dimensions: 9.3 x 8 x 5.3 mm (L x W x H), datasheet: https://www.farnell.com/datasheets/2130962.pdf
+barrel jack Wuerth Elektronik 694102107102
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_Wuerth_694103107102_1.35x3.9mm
+Wuerth Elektronik barrel jack connector, SMD, 3.9mm OD, 1.35mm ID, with switch, 18V, 5A, dimensions: 9.3 x 8 x 5.3 mm (L x W x H), datasheet: https://www.we-online.com/components/products/datasheet/694103107102.pdf
+barrel jack Wuerth Elektronik 694103107102
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_Wuerth_694106106102_2.0x5.5mm
+Wuerth Elektronik 694106106102 Barrel Jack, 2.0x5.5mm, https://www.we-online.com/components/products/datasheet/694106106102.pdf
+barrel jack Wuerth Elektronik 694106106102
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_Wuerth_694108106102_2.5x5.5mm
+Wuerth Elektronik 694108106102 Barrel Jack, 2.5x5.5mm, https://www.we-online.com/components/products/datasheet/694106106102.pdf
+barrel jack Wuerth Elektronik 694108106102
+0
+4
+3
+Connector_BarrelJack
+BarrelJack_Wuerth_6941xx301002
+Wuerth electronics barrel jack connector (5.5mm outher diameter, inner diameter 2.05mm or 2.55mm depending on exact order number), See: http://katalog.we-online.de/em/datasheet/6941xx301002.pdf
+connector barrel jack
+0
+3
+3
+Connector_Card
+CF-Card_3M_N7E50-A516xx-30
+Compact Flash Card connector, polarization inverse (https://multimedia.3m.com/mws/media/22424O/3mtm-cf-card-header-type-i-low-profile-surface-mount-ts0747.pdf)
+connector cf
+0
+54
+50
+Connector_Card
+CF-Card_3M_N7E50-E516xx-30
+Compact Flash Card connector, normal polarization (https://multimedia.3m.com/mws/media/22424O/3mtm-cf-card-header-type-i-low-profile-surface-mount-ts0747.pdf)
+connector cf
+0
+54
+50
+Connector_Card
+SD-SIM_microSD-microSIM_Molex_104168-1620
+microSD and microSIM connector, https://www.molex.com/pdm_docs/sd/1041681620_sd.pdf
+Combo Connector microSD and microSIM
+0
+25
+18
+Connector_Card
+SD_Card_Device_16mm_SlotDepth
+SD card device PCB layout, contacts and mechanicalm, 16mm slot depth. Manufacture with PCB thickness of 1.4mm, http://www.convict.lu/pdf/ProdManualSDCardv1.9.pdf
+SD Card
+0
+9
+9
+Connector_Card
+SD_Hirose_DM1AA_SF_PEJ82
+SD, SMD, top-mount, push-push (https://www.hirose.com/product/document?clcode=CL0609-0004-8-82&productname=DM1AA-SF-PEJ(82)&series=DM1&documenttype=2DDrawing&lang=en&documentid=0000915301)
+SD card connector
+0
+16
+13
+Connector_Card
+SD_Kyocera_145638009211859+
+SD Card Connector, Normal Type, Outer Tail, Without Ejector (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf)
+sd card smt
+0
+13
+13
+Connector_Card
+SD_Kyocera_145638009511859+
+SD Card Connector, Normal Type, Outer Tail, Spring Eject Type (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf)
+sd card smt
+0
+13
+13
+Connector_Card
+SD_Kyocera_145638109211859+
+SD Card Connector, Reverse Type, Outer Tail, Without Ejector (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf)
+sd card smt
+0
+13
+13
+Connector_Card
+SD_Kyocera_145638109511859+
+SD Card Connector, Reverse Type, Outer Tail, Spring Eject Type (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf)
+sd card smt
+0
+13
+13
+Connector_Card
+SD_TE_2041021
+SD card connector, top mount, SMT (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2041021%7FB%7Fpdf%7FEnglish%7FENG_CD_2041021_B_C_2041021_B.pdf%7F2041021-4)
+sd card
+0
+15
+12
+Connector_Card
+microSD_HC_Hirose_DM3AT-SF-PEJM5
+Micro SD, SMD, right-angle, push-pull (https://www.hirose.com/product/en/download_file/key_name/DM3AT-SF-PEJM5/category/Drawing%20(2D)/doc_file_id/44099/?file_category_id=6&item_id=06090031000&is_series=)
+Micro SD
+0
+14
+11
+Connector_Card
+microSD_HC_Hirose_DM3BT-DSF-PEJS
+Micro SD, SMD, reverse on-board, right-angle, push-pull (https://www.hirose.com/product/en/download_file/key_name/DM3BT-DSF-PEJS/category/Drawing%20(2D)/doc_file_id/44097/?file_category_id=6&item_id=06090029900&is_series=)
+Micro SD
+0
+16
+11
+Connector_Card
+microSD_HC_Hirose_DM3D-SF
+Micro SD, SMD, right-angle, push-pull (https://media.digikey.com/PDF/Data%20Sheets/Hirose%20PDFs/DM3D-SF.pdf)
+Micro SD
+0
+14
+11
+Connector_Card
+microSD_HC_Molex_47219-2001
+1.10mm Pitch microSD Card Connector, Hinge Type, https://www.molex.com/pdm_docs/sd/472192001_sd.pdf
+Micro SD
+0
+12
+9
+Connector_Card
+microSD_HC_Molex_104031-0811
+1.10mm Pitch microSD Memory Card Connector, Surface Mount, Push-Pull Type, 1.42mm Height, with Detect Switch (https://www.molex.com/pdm_docs/sd/1040310811_sd.pdf)
+microSD SD molex
+0
+14
+11
+Connector_Card
+microSD_HC_Wuerth_693072010801
+http://katalog.we-online.de/em/datasheet/693072010801.pdf
+Micro SD Wuerth Wurth Würth
+0
+12
+9
+Connector_Card
+microSIM_JAE_SF53S006VCBR2000
+micro SIM card connector, 6pos., 1.45mm height, Push-pull type, https://www.jae.com/direct/topics/topics_file_download/topics_id=68883&ext_no=06
+microSIM GSM Card
+0
+14
+7
+Connector_Card
+nanoSIM_GCT_SIM8060-6-0-14-00
+hinged nano SIM, without card detect, https://gct.co/files/drawings/sim8060.pdf
+nano SIM
+0
+10
+7
+Connector_Card
+nanoSIM_GCT_SIM8060-6-1-14-00
+hinged nano SIM, with card detect, https://gct.co/files/drawings/sim8060.pdf
+nano SIM
+0
+10
+8
+Connector_Card
+nanoSIM_Hinged_CUI_NSIM-2-C
+Hinged nano SIM holder, 6 pin, with normally open card detection switch to GND: https://www.cuidevices.com/product/resource/nsim-2-c.pdf
+SIM holder nano 4FF
+0
+10
+8
+Connector_Coaxial
+BNC_Amphenol_031-5539_Vertical
+BNC coaxial connector vertical, Amphenol 031-71059, https://www.amphenolrf.com/library/download/link/link_id/594427/parent/031-5539/
+BNC Amphenol Vertical
+0
+4
+2
+Connector_Coaxial
+BNC_Amphenol_031-6575_Horizontal
+dual independently isolated BNC plug, https://www.amphenolrf.com/library/download/link/link_id/594289/parent/031-6575/
+Dual BNC Amphenol Horizontal
+0
+6
+4
+Connector_Coaxial
+BNC_Amphenol_B6252HB-NPP3G-50_Horizontal
+http://www.farnell.com/datasheets/612848.pdf
+BNC Amphenol Horizontal
+0
+4
+2
+Connector_Coaxial
+BNC_PanelMountable_Vertical
+Panel-mountable BNC connector mounted through PCB, vertical
+BNC connector
+0
+2
+2
+Connector_Coaxial
+BNC_TEConnectivity_1478035_Horizontal
+BNC RF Interface, PCB mount 4 pin, Right Angle, Bayonet, 50Ohm, 4GHz, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1478035%7FB1%7Fpdf%7FEnglish%7FENG_CD_1478035_B1.pdf%7F1-1478035-0
+BNC RF interface bayonet 50ohm
+0
+5
+2
+Connector_Coaxial
+BNC_TEConnectivity_1478204_Vertical
+BNC female PCB mount 4 pin straight chassis connector http://www.te.com/usa-en/product-1-1478204-0.html
+BNC female PCB mount 4 pin straight chassis connector 
+0
+5
+2
+Connector_Coaxial
+BNC_Win_364A2x95_Horizontal
+Dual front isolated BNC plug (https://www.winconn.com/wp-content/uploads/364A2595.pdf)
+Dual BNC Horizontal Isolated
+0
+6
+3
+Connector_Coaxial
+CoaxialSwitch_Hirose_MS-156C3_Horizontal
+Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
+Switch Coaxial RF
+0
+12
+3
+Connector_Coaxial
+LEMO-EPG.00.302.NLN
+Triaxial LEMO connector PCB elbow socket https://web.lemo.com/ged_drw/CD-EPG.00.302.NLN-01-en.pdf
+LEMO THT Female Jack Horizontal
+0
+6
+3
+Connector_Coaxial
+LEMO-EPL.00.250.NTN
+Coaxial LEMO connector PCB elbow socket https://web.lemo.com/ged_drw/CD-EPL.00.250.NTN-01-en.pdf
+LEMO THT Female Jack Horizontal
+0
+5
+2
+Connector_Coaxial
+MMCX_Molex_73415-0961_Horizontal_0.8mm-PCB
+Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf
+Molex MMCX Horizontal Coaxial
+0
+3
+2
+Connector_Coaxial
+MMCX_Molex_73415-0961_Horizontal_1.0mm-PCB
+Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf
+Molex MMCX Horizontal Coaxial
+0
+3
+2
+Connector_Coaxial
+MMCX_Molex_73415-0961_Horizontal_1.6mm-PCB
+Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf
+Molex MMCX Horizontal Coaxial
+0
+3
+2
+Connector_Coaxial
+MMCX_Molex_73415-1471_Vertical
+http://www.molex.com/pdm_docs/sd/734151471_sd.pdf
+Molex MMCX Coaxial Connector 50 ohms Female Jack Vertical THT
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_901-143_Horizontal
+Amphenol RF 901-143 https://www.amphenolrf.com/library/download/link/link_id/593645/parent/901-143/
+SMA THT Female Jack Horizontal
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_901-144_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/593640/parent/901-144/
+SMA THT Female Jack Vertical
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132134-10_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/596219/parent/132134-10/
+SMA SMD Female Jack Vertical
+0
+3
+2
+Connector_Coaxial
+SMA_Amphenol_132134-11_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/596215/parent/132134-11/
+SMA THT Female Jack Vertical ExtendedLegs
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132134-14_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/596217/parent/132134-14/
+SMA THT Female Jack Vertical ExtendedLegs
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132134-16_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/598157/parent/132134-16/
+SMA THT Female Jack Vertical ExtendedLegs
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132134_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/593003/parent/132134/
+SMA THT Female Jack Vertical ExtendedLegs
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132203-12_Horizontal
+https://www.amphenolrf.com/library/download/link/link_id/596063/parent/132203-12/
+SMA THT Female Jack Horizontal
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132289_EdgeMount
+https://www.amphenolrf.com/library/download/link/link_id/595984/parent/132289/
+SMA
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132291-12_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/595982/parent/132291-12/
+SMA THT Female Jack Vertical Bulkhead
+0
+5
+2
+Connector_Coaxial
+SMA_Amphenol_132291_Vertical
+https://www.amphenolrf.com/library/download/link/link_id/595983/parent/132291/
+SMA THT Female Jack Vertical Bulkhead
+0
+5
+2
+Connector_Coaxial
+SMA_BAT_Wireless_BWSMA-KWE-Z001
+BAT Wireless BWSMA-KWE-Z00 https://www.lcsc.com/datasheet/lcsc_datasheet_2310171703_BAT-WIRELESS-BWSMA-KWE-Z001_C496551.pdf
+SMA THT Female Jack Horizontal
+0
+5
+2
+Connector_Coaxial
+SMA_Molex_73251-1153_EdgeMount_Horizontal
+Molex SMA RF Connectors, Edge Mount, https://tools.molex.com/pdm_docs/sd/732511150_sd.pdf
+sma edge
+0
+11
+2
+Connector_Coaxial
+SMA_Molex_73251-2120_EdgeMount_Horizontal
+Molex SMA RF Connector, Edge Mount, (http://www.molex.com/pdm_docs/sd/732512120_sd.pdf)
+sma edge
+0
+7
+2
+Connector_Coaxial
+SMA_Molex_73251-2200_Horizontal
+https://tools.molex.com/pdm_docs/sd/732512200_sd.pdf
+SMA THT Female Jack Horizontal
+0
+5
+2
+Connector_Coaxial
+SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount
+Connector SMA, 0Hz to 20GHz, 50Ohm, Edge Mount (http://suddendocs.samtec.com/prints/sma-j-p-x-st-em1-mkt.pdf)
+SMA Straight Samtec Edge Mount
+0
+5
+2
+Connector_Coaxial
+SMA_Wurth_60312102114405_Vertical
+Würth WR-SMA PCB SMT Jack, Vertical (https://www.we-online.com/components/products/datasheet/60312102114405.pdf)
+Coaxial Connector 50 ohms Female
+0
+3
+2
+Connector_Coaxial
+SMA_Wurth_60312002114503_Vertical
+https://www.we-online.de/katalog/datasheet/60312002114503.pdf
+SMA THT Female Jack Vertical ExtendedLegs
+0
+5
+2
+Connector_Coaxial
+SMB_Jack_Vertical
+SMB pcb mounting jack
+SMB Jack  Striaght
+0
+5
+2
+Connector_Coaxial
+U.FL_Hirose_U.FL-R-SMT-1_Vertical
+Hirose U.FL Coaxial https://www.hirose.com/product/en/products/U.FL/U.FL-R-SMT-1%2810%29/
+Hirose U.FL Coaxial
+0
+3
+2
+Connector_Coaxial
+U.FL_Molex_MCRF_73412-0110_Vertical
+Molex Microcoaxial RF Connectors (MCRF), mates Hirose U.FL, (http://www.molex.com/pdm_docs/sd/734120110_sd.pdf)
+mcrf hirose ufl u.fl microcoaxial
+0
+4
+2
+Connector_Coaxial
+WR-MMCX_Wuerth_66012102111404_Vertical
+Würth WR-MMCX PCB SMT Jack, Vertical (https://www.we-online.com/components/products/datasheet/66012102111404.pdf)
+Coaxial Connector 50 ohms Female
+0
+3
+2
+Connector_Coaxial
+WR-MMCX_Wuerth_66011102111302_Horizontal
+Würth WR-MMCX PCB SMT Jack, Horizontal (https://www.we-online.com/components/products/datasheet/66011102111302.pdf)
+Coaxial Connector 50 ohms Female
+0
+7
+2
+Connector_DIN
+DIN41612_B2_2x8_Female_Vertical_THT
+DIN41612 connector, type B/2, Vertical, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/2
+0
+16
+16
+Connector_DIN
+DIN41612_B2_2x8_Male_Horizontal_THT
+DIN41612 connector, type B/2, Horizontal, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/2
+0
+16
+16
+Connector_DIN
+DIN41612_B2_2x16_Female_Vertical_THT
+DIN41612 connector, type B/2, Vertical, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/2
+0
+32
+32
+Connector_DIN
+DIN41612_B2_2x16_Male_Horizontal_THT
+DIN41612 connector, type B/2, Horizontal, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/2
+0
+32
+32
+Connector_DIN
+DIN41612_B3_2x5_Female_Vertical_THT
+DIN41612 connector, type B/3, Vertical, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/3
+0
+10
+10
+Connector_DIN
+DIN41612_B3_2x5_Male_Horizontal_THT
+DIN41612 connector, type B/3, Horizontal, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/3
+0
+10
+10
+Connector_DIN
+DIN41612_B3_2x10_Female_Vertical_THT
+DIN41612 connector, type B/3, Vertical, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/3
+0
+20
+20
+Connector_DIN
+DIN41612_B3_2x10_Male_Horizontal_THT
+DIN41612 connector, type B/3, Horizontal, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B/3
+0
+20
+20
+Connector_DIN
+DIN41612_B_1x32_Female_Vertical_THT
+DIN41612 connector, type B, Vertical, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+32
+32
+Connector_DIN
+DIN41612_B_1x32_Male_Horizontal_THT
+DIN41612 connector, type B, Horizontal, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+32
+32
+Connector_DIN
+DIN41612_B_2x16_Female_Vertical_THT
+DIN41612 connector, type B, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+32
+32
+Connector_DIN
+DIN41612_B_2x16_Male_Horizontal_THT
+DIN41612 connector, type B, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+32
+32
+Connector_DIN
+DIN41612_B_2x32_Female_Vertical_THT
+DIN41612 connector, type B, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+64
+64
+Connector_DIN
+DIN41612_B_2x32_Male_Horizontal_THT
+DIN41612 connector, type B, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 B
+0
+64
+64
+Connector_DIN
+DIN41612_C2_2x16_Female_Vertical_THT
+DIN41612 connector, type C/2, Vertical, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/2
+0
+32
+32
+Connector_DIN
+DIN41612_C2_2x16_Male_Horizontal_THT
+DIN41612 connector, type C/2, Horizontal, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/2
+0
+32
+32
+Connector_DIN
+DIN41612_C2_3x16_Female_Vertical_THT
+DIN41612 connector, type C/2, Vertical, 3 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/2
+0
+48
+48
+Connector_DIN
+DIN41612_C2_3x16_Male_Horizontal_THT
+DIN41612 connector, type C/2, Horizontal, 3 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/2
+0
+48
+48
+Connector_DIN
+DIN41612_C3_2x10_Female_Vertical_THT
+DIN41612 connector, type C/3, Vertical, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/3
+0
+20
+20
+Connector_DIN
+DIN41612_C3_2x10_Male_Horizontal_THT
+DIN41612 connector, type C/3, Horizontal, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/3
+0
+20
+20
+Connector_DIN
+DIN41612_C3_3x10_Female_Vertical_THT
+DIN41612 connector, type C/3, Vertical, 3 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/3
+0
+30
+30
+Connector_DIN
+DIN41612_C3_3x10_Male_Horizontal_THT
+DIN41612 connector, type C/3, Horizontal, 3 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C/3
+0
+30
+30
+Connector_DIN
+DIN41612_C_1x32_Female_Vertical_THT
+DIN41612 connector, type C, Vertical, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+32
+32
+Connector_DIN
+DIN41612_C_1x32_Male_Horizontal_THT
+DIN41612 connector, type C, Horizontal, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+32
+32
+Connector_DIN
+DIN41612_C_2x16_Female_Vertical_THT
+DIN41612 connector, type C, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+32
+32
+Connector_DIN
+DIN41612_C_2x16_Male_Horizontal_THT
+DIN41612 connector, type C, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+32
+32
+Connector_DIN
+DIN41612_C_2x32_Female_Vertical_THT
+DIN41612 connector, type C, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+64
+64
+Connector_DIN
+DIN41612_C_2x32_Male_Horizontal_THT
+DIN41612 connector, type C, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+64
+64
+Connector_DIN
+DIN41612_C_3x16_Female_Vertical_THT
+DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+48
+48
+Connector_DIN
+DIN41612_C_3x16_Male_Horizontal_THT
+DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+48
+48
+Connector_DIN
+DIN41612_C_3x32_Female_Vertical_THT
+DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+96
+96
+Connector_DIN
+DIN41612_C_3x32_Male_Horizontal_THT
+DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 C
+0
+96
+96
+Connector_DIN
+DIN41612_D_2x8_Female_Vertical_THT
+DIN41612 connector, type D, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 D
+0
+16
+16
+Connector_DIN
+DIN41612_D_2x8_Male_Horizontal_THT
+DIN41612 connector, type D, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 D
+0
+16
+16
+Connector_DIN
+DIN41612_D_2x16_Female_Vertical_THT
+DIN41612 connector, type D, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 D
+0
+32
+32
+Connector_DIN
+DIN41612_D_2x16_Male_Horizontal_THT
+DIN41612 connector, type D, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 D
+0
+32
+32
+Connector_DIN
+DIN41612_E_2x16_Female_Vertical_THT
+DIN41612 connector, type E, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+32
+32
+Connector_DIN
+DIN41612_E_2x16_Male_Horizontal_THT
+DIN41612 connector, type E, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+32
+32
+Connector_DIN
+DIN41612_E_2x16_RowsAC_Female_Vertical_THT
+DIN41612 connector, type E, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+32
+32
+Connector_DIN
+DIN41612_E_2x16_RowsAC_Male_Horizontal_THT
+DIN41612 connector, type E, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+32
+32
+Connector_DIN
+DIN41612_E_3x16_Female_Vertical_THT
+DIN41612 connector, type E, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+48
+48
+Connector_DIN
+DIN41612_E_3x16_Male_Horizontal_THT
+DIN41612 connector, type E, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 E
+0
+48
+48
+Connector_DIN
+DIN41612_F_2x16_Female_Vertical_THT
+DIN41612 connector, type F, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+32
+32
+Connector_DIN
+DIN41612_F_2x16_Male_Horizontal_THT
+DIN41612 connector, type F, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+32
+32
+Connector_DIN
+DIN41612_F_2x16_RowsZD_Female_Vertical_THT
+DIN41612 connector, type F, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+32
+32
+Connector_DIN
+DIN41612_F_2x16_RowsZD_Male_Horizontal_THT
+DIN41612 connector, type F, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+32
+32
+Connector_DIN
+DIN41612_F_3x16_Female_Vertical_THT
+DIN41612 connector, type F, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+48
+48
+Connector_DIN
+DIN41612_F_3x16_Male_Horizontal_THT
+DIN41612 connector, type F, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 F
+0
+48
+48
+Connector_DIN
+DIN41612_M-flat_3x8+8_Female_Vertical_THT
+DIN41612 connector, type M-flat, Vertical, 3 rows 8 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-flat
+0
+24
+24
+Connector_DIN
+DIN41612_M-flat_3x14+6_Female_Vertical_THT
+DIN41612 connector, type M-flat, Vertical, 3 rows 14 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-flat
+0
+42
+42
+Connector_DIN
+DIN41612_M-flat_3x20+4_Female_Vertical_THT
+DIN41612 connector, type M-flat, Vertical, 3 rows 20 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-flat
+0
+60
+60
+Connector_DIN
+DIN41612_M-flat_3x26+2_Female_Vertical_THT
+DIN41612 connector, type M-flat, Vertical, 3 rows 26 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-flat
+0
+78
+78
+Connector_DIN
+DIN41612_M-invers_3x2+10_Female_Horizontal_THT
+DIN41612 connector, type M-invers, Horizontal, 3 rows 2 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+6
+6
+Connector_DIN
+DIN41612_M-invers_3x2+10_Male_Vertical_THT
+DIN41612 connector, type M-invers, Vertical, 3 rows 2 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+6
+6
+Connector_DIN
+DIN41612_M-invers_3x8+8_Female_Horizontal_THT
+DIN41612 connector, type M-invers, Horizontal, 3 rows 8 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+24
+24
+Connector_DIN
+DIN41612_M-invers_3x8+8_Male_Vertical_THT
+DIN41612 connector, type M-invers, Vertical, 3 rows 8 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+24
+24
+Connector_DIN
+DIN41612_M-invers_3x14+6_Female_Horizontal_THT
+DIN41612 connector, type M-invers, Horizontal, 3 rows 14 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+42
+42
+Connector_DIN
+DIN41612_M-invers_3x14+6_Male_Vertical_THT
+DIN41612 connector, type M-invers, Vertical, 3 rows 14 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+42
+42
+Connector_DIN
+DIN41612_M-invers_3x20+4_Female_Horizontal_THT
+DIN41612 connector, type M-invers, Horizontal, 3 rows 20 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+60
+60
+Connector_DIN
+DIN41612_M-invers_3x20+4_Male_Vertical_THT
+DIN41612 connector, type M-invers, Vertical, 3 rows 20 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+60
+60
+Connector_DIN
+DIN41612_M-invers_3x26+2_Female_Horizontal_THT
+DIN41612 connector, type M-invers, Horizontal, 3 rows 26 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+78
+78
+Connector_DIN
+DIN41612_M-invers_3x26+2_Male_Vertical_THT
+DIN41612 connector, type M-invers, Vertical, 3 rows 26 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M-invers
+0
+78
+78
+Connector_DIN
+DIN41612_M_3x8+8_Female_Vertical_THT
+DIN41612 connector, type M, Vertical, 3 rows 8 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+24
+24
+Connector_DIN
+DIN41612_M_3x8+8_Male_Horizontal_THT
+DIN41612 connector, type M, Horizontal, 3 rows 8 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+24
+24
+Connector_DIN
+DIN41612_M_3x14+6_Female_Vertical_THT
+DIN41612 connector, type M, Vertical, 3 rows 14 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+42
+42
+Connector_DIN
+DIN41612_M_3x14+6_Male_Horizontal_THT
+DIN41612 connector, type M, Horizontal, 3 rows 14 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+42
+42
+Connector_DIN
+DIN41612_M_3x20+4_Female_Vertical_THT
+DIN41612 connector, type M, Vertical, 3 rows 20 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+60
+60
+Connector_DIN
+DIN41612_M_3x20+4_Male_Horizontal_THT
+DIN41612 connector, type M, Horizontal, 3 rows 20 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+60
+60
+Connector_DIN
+DIN41612_M_3x26+2_Female_Vertical_THT
+DIN41612 connector, type M, Vertical, 3 rows 26 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+78
+78
+Connector_DIN
+DIN41612_M_3x26+2_Male_Horizontal_THT
+DIN41612 connector, type M, Horizontal, 3 rows 26 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 M
+0
+78
+78
+Connector_DIN
+DIN41612_Q2_2x16_Female_Horizontal_THT
+DIN41612 connector, type Q/2, Horizontal, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q/2
+0
+32
+32
+Connector_DIN
+DIN41612_Q2_2x16_Male_Vertical_THT
+DIN41612 connector, type Q/2, Vertical, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q/2
+0
+32
+32
+Connector_DIN
+DIN41612_Q3_2x10_Female_Horizontal_THT
+DIN41612 connector, type Q/3, Horizontal, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q/3
+0
+20
+20
+Connector_DIN
+DIN41612_Q3_2x10_Male_Vertical_THT
+DIN41612 connector, type Q/3, Vertical, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q/3
+0
+20
+20
+Connector_DIN
+DIN41612_Q_2x32_Female_Horizontal_THT
+DIN41612 connector, type Q, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q
+0
+64
+64
+Connector_DIN
+DIN41612_Q_2x32_Male_Vertical_THT
+DIN41612 connector, type Q, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 Q
+0
+64
+64
+Connector_DIN
+DIN41612_R2_2x16_Female_Horizontal_THT
+DIN41612 connector, type R/2, Horizontal, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/2
+0
+32
+32
+Connector_DIN
+DIN41612_R2_2x16_Male_Vertical_THT
+DIN41612 connector, type R/2, Vertical, 2 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/2
+0
+32
+32
+Connector_DIN
+DIN41612_R2_3x16_Female_Horizontal_THT
+DIN41612 connector, type R/2, Horizontal, 3 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/2
+0
+48
+48
+Connector_DIN
+DIN41612_R2_3x16_Male_Vertical_THT
+DIN41612 connector, type R/2, Vertical, 3 rows 16 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/2
+0
+48
+48
+Connector_DIN
+DIN41612_R3_2x10_Female_Horizontal_THT
+DIN41612 connector, type R/3, Horizontal, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/3
+0
+20
+20
+Connector_DIN
+DIN41612_R3_2x10_Male_Vertical_THT
+DIN41612 connector, type R/3, Vertical, 2 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/3
+0
+20
+20
+Connector_DIN
+DIN41612_R3_3x10_Female_Horizontal_THT
+DIN41612 connector, type R/3, Horizontal, 3 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/3
+0
+30
+30
+Connector_DIN
+DIN41612_R3_3x10_Male_Vertical_THT
+DIN41612 connector, type R/3, Vertical, 3 rows 10 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R/3
+0
+30
+30
+Connector_DIN
+DIN41612_R_1x32_Female_Horizontal_THT
+DIN41612 connector, type R, Horizontal, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+32
+32
+Connector_DIN
+DIN41612_R_1x32_Male_Vertical_THT
+DIN41612 connector, type R, Vertical, 1 row 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+32
+32
+Connector_DIN
+DIN41612_R_2x16_Female_Horizontal_THT
+DIN41612 connector, type R, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+32
+32
+Connector_DIN
+DIN41612_R_2x16_Male_Vertical_THT
+DIN41612 connector, type R, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+32
+32
+Connector_DIN
+DIN41612_R_2x32_Female_Horizontal_THT
+DIN41612 connector, type R, Horizontal, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+64
+64
+Connector_DIN
+DIN41612_R_2x32_Male_Vertical_THT
+DIN41612 connector, type R, Vertical, 2 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+64
+64
+Connector_DIN
+DIN41612_R_3x16_Female_Horizontal_THT
+DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+48
+48
+Connector_DIN
+DIN41612_R_3x16_Male_Vertical_THT
+DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+48
+48
+Connector_DIN
+DIN41612_R_3x32_Female_Horizontal_THT
+DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+96
+96
+Connector_DIN
+DIN41612_R_3x32_Male_Vertical_THT
+DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://b2b.harting.com/files/livebooks/en/PRD0200000100063/downloads/livebook.pdf
+DIN 41612 IEC 60603 R
+0
+96
+96
+Connector_Dsub
+DSUB-9_Pins_EdgeMount_P2.77mm
+9-pin D-Sub connector, solder-cups edge-mounted, pins (male), x-pin-pitch 2.77mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector edge mount solder cup pins x-pin-pitch 2.77mm mounting holes distance 25mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 25mm mounting-hole-offset 4.94mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 25mm mounting-hole-offset 9.12mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset 11.32mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 8.2mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 15.98mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Pins_Vertical_P2.77x2.84mm
+9-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 25mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Pins_Vertical_P2.77x2.84mm_MountingHoles
+9-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 25mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_EdgeMount_P2.77mm
+9-pin D-Sub connector, solder-cups edge-mounted, socket (female), x-pin-pitch 2.77mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector edge mount solder cup socket x-pin-pitch 2.77mm mounting holes distance 25mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 25mm mounting-hole-offset 4.94mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 25mm mounting-hole-offset 9.12mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset 11.32mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 8.2mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 15.98mm
+0
+11
+10
+Connector_Dsub
+DSUB-9_Socket_Vertical_P2.77x2.84mm
+9-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 25mm
+0
+9
+9
+Connector_Dsub
+DSUB-9_Socket_Vertical_P2.77x2.84mm_MountingHoles
+9-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+9-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 25mm
+0
+11
+10
+Connector_Dsub
+DSUB-15-HD_Pins_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 25mm mounting-hole-offset 4.94mm
+0
+17
+16
+Connector_Dsub
+DSUB-15-HD_Pins_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 25mm mounting-hole-offset 10.89mm
+0
+17
+16
+Connector_Dsub
+DSUB-15-HD_Pins_Vertical_P2.29x1.98mm_MountingHoles
+15-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.29x1.98mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT pins pitch 2.29x1.98mm mounting holes distance 25mm
+0
+17
+16
+Connector_Dsub
+DSUB-15-HD_Socket_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 25mm mounting-hole-offset 4.94mm
+0
+17
+16
+Connector_Dsub
+DSUB-15-HD_Socket_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 25mm mounting-hole-offset 10.89mm
+0
+17
+16
+Connector_Dsub
+DSUB-15-HD_Socket_Vertical_P2.29x1.98mm_MountingHoles
+15-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.29x1.98mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT socket pitch 2.29x1.98mm mounting holes distance 25mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_EdgeMount_P2.77mm
+15-pin D-Sub connector, solder-cups edge-mounted, pins (male), x-pin-pitch 2.77mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector edge mount solder cup pins x-pin-pitch 2.77mm mounting holes distance 33.3mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 33.3mm mounting-hole-offset 4.94mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 33.3mm mounting-hole-offset 9.12mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 33.3mm mounting-hole-offset 11.32mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 8.2mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 15.98mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Pins_Vertical_P2.77x2.84mm
+15-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 33.3mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Pins_Vertical_P2.77x2.84mm_MountingHoles
+15-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 33.3mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_EdgeMount_P2.77mm
+15-pin D-Sub connector, solder-cups edge-mounted, socket (female), x-pin-pitch 2.77mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector edge mount solder cup socket x-pin-pitch 2.77mm mounting holes distance 33.3mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 33.3mm mounting-hole-offset 4.94mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 33.3mm mounting-hole-offset 9.12mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 33.3mm mounting-hole-offset 11.32mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 8.2mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 15.98mm
+0
+17
+16
+Connector_Dsub
+DSUB-15_Socket_Vertical_P2.77x2.84mm
+15-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 33.3mm
+0
+15
+15
+Connector_Dsub
+DSUB-15_Socket_Vertical_P2.77x2.84mm_MountingHoles
+15-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+15-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 33.3mm
+0
+17
+16
+Connector_Dsub
+DSUB-25_Pins_EdgeMount_P2.77mm
+25-pin D-Sub connector, solder-cups edge-mounted, pins (male), x-pin-pitch 2.77mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector edge mount solder cup pins x-pin-pitch 2.77mm mounting holes distance 47.1mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 47.1mm mounting-hole-offset 4.94mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 47.1mm mounting-hole-offset 9.12mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 47.1mm mounting-hole-offset 11.32mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 8.2mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 15.98mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Pins_Vertical_P2.77x2.84mm
+25-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 47.1mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Pins_Vertical_P2.77x2.84mm_MountingHoles
+25-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 47.1mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_EdgeMount_P2.77mm
+25-pin D-Sub connector, solder-cups edge-mounted, socket (female), x-pin-pitch 2.77mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector edge mount solder cup socket x-pin-pitch 2.77mm mounting holes distance 47.1mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 47.1mm mounting-hole-offset 4.94mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 47.1mm mounting-hole-offset 9.12mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 47.1mm mounting-hole-offset 11.32mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 8.2mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 15.98mm
+0
+27
+26
+Connector_Dsub
+DSUB-25_Socket_Vertical_P2.77x2.84mm
+25-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 47.1mm
+0
+25
+25
+Connector_Dsub
+DSUB-25_Socket_Vertical_P2.77x2.84mm_MountingHoles
+25-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+25-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 47.1mm
+0
+27
+26
+Connector_Dsub
+DSUB-26-HD_Pins_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 33.3mm mounting-hole-offset 4.94mm
+0
+28
+27
+Connector_Dsub
+DSUB-26-HD_Pins_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 33.3mm mounting-hole-offset 10.89mm
+0
+28
+27
+Connector_Dsub
+DSUB-26-HD_Pins_Vertical_P2.29x1.98mm_MountingHoles
+26-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.29x1.98mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector straight vertical THT pins pitch 2.29x1.98mm mounting holes distance 33.3mm
+0
+28
+27
+Connector_Dsub
+DSUB-26-HD_Socket_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 33.3mm mounting-hole-offset 4.94mm
+0
+28
+27
+Connector_Dsub
+DSUB-26-HD_Socket_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 33.3mm mounting-hole-offset 10.89mm
+0
+28
+27
+Connector_Dsub
+DSUB-26-HD_Socket_Vertical_P2.29x1.98mm_MountingHoles
+26-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.29x1.98mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+26-pin D-Sub connector straight vertical THT socket pitch 2.29x1.98mm mounting holes distance 33.3mm
+0
+28
+27
+Connector_Dsub
+DSUB-37_Pins_EdgeMount_P2.77mm
+37-pin D-Sub connector, solder-cups edge-mounted, pins (male), x-pin-pitch 2.77mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector edge mount solder cup pins x-pin-pitch 2.77mm mounting holes distance 63.5mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 63.5mm mounting-hole-offset 4.94mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 63.5mm mounting-hole-offset 9.12mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 63.5mm mounting-hole-offset 11.32mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 8.2mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 15.98mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Pins_Vertical_P2.77x2.84mm
+37-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 63.5mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Pins_Vertical_P2.77x2.84mm_MountingHoles
+37-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector straight vertical THT pins pitch 2.77x2.84mm mounting holes distance 63.5mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_EdgeMount_P2.77mm
+37-pin D-Sub connector, solder-cups edge-mounted, socket (female), x-pin-pitch 2.77mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector edge mount solder cup socket x-pin-pitch 2.77mm mounting holes distance 63.5mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.54mm pin-PCB-offset 9.4mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 4.94mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 4.94mm mounting-holes-distance 63.5mm mounting-hole-offset 4.94mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 7.7mm mounting-holes-distance 63.5mm mounting-hole-offset 9.12mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see https://docs.rs-online.com/02d6/0900766b81585df2.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.4mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 63.5mm mounting-hole-offset 11.32mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 8.2mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm
+37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 15.98mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 15.98mm
+0
+39
+38
+Connector_Dsub
+DSUB-37_Socket_Vertical_P2.77x2.84mm
+37-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 63.5mm
+0
+37
+37
+Connector_Dsub
+DSUB-37_Socket_Vertical_P2.77x2.84mm_MountingHoles
+37-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+37-pin D-Sub connector straight vertical THT socket pitch 2.77x2.84mm mounting holes distance 63.5mm
+0
+39
+38
+Connector_Dsub
+DSUB-44-HD_Pins_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 47.1mm mounting-hole-offset 4.94mm
+0
+46
+45
+Connector_Dsub
+DSUB-44-HD_Pins_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 47.1mm mounting-hole-offset 10.89mm
+0
+46
+45
+Connector_Dsub
+DSUB-44-HD_Pins_Vertical_P2.29x1.98mm_MountingHoles
+44-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.29x1.98mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector straight vertical THT pins pitch 2.29x1.98mm mounting holes distance 47.1mm
+0
+46
+45
+Connector_Dsub
+DSUB-44-HD_Socket_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 47.1mm mounting-hole-offset 4.94mm
+0
+46
+45
+Connector_Dsub
+DSUB-44-HD_Socket_Horizontal_P2.29x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.29x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.29x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 47.1mm mounting-hole-offset 10.89mm
+0
+46
+45
+Connector_Dsub
+DSUB-44-HD_Socket_Vertical_P2.29x1.98mm_MountingHoles
+44-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.29x1.98mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+44-pin D-Sub connector straight vertical THT socket pitch 2.29x1.98mm mounting holes distance 47.1mm
+0
+46
+45
+Connector_Dsub
+DSUB-62-HD_Pins_Horizontal_P2.41x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.41x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.41x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 63.5mm mounting-hole-offset 4.94mm
+0
+64
+63
+Connector_Dsub
+DSUB-62-HD_Pins_Horizontal_P2.41x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.41x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector horizontal angled 90deg THT pins pitch 2.41x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 63.5mm mounting-hole-offset 10.89mm
+0
+64
+63
+Connector_Dsub
+DSUB-62-HD_Pins_Vertical_P2.41x1.98mm_MountingHoles
+62-pin D-Sub connector, straight/vertical, THT-mount, pins (male), pitch 2.41x1.98mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector straight vertical THT pins pitch 2.41x1.98mm mounting holes distance 63.5mm
+0
+64
+63
+Connector_Dsub
+DSUB-62-HD_Socket_Horizontal_P2.41x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm
+62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.41x1.9mm, pin-PCB-offset 3.03mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.94mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.41x1.9mm pin-PCB-offset 3.03mm mounting-holes-distance 63.5mm mounting-hole-offset 4.94mm
+0
+64
+63
+Connector_Dsub
+DSUB-62-HD_Socket_Horizontal_P2.41x2.54mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm
+62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, socket (female), pitch 2.41x2.54mm, pin-PCB-offset 8.35mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 10.89mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector horizontal angled 90deg THT socket pitch 2.41x2.54mm pin-PCB-offset 8.35mm mounting-holes-distance 63.5mm mounting-hole-offset 10.89mm
+0
+64
+63
+Connector_Dsub
+DSUB-62-HD_Socket_Vertical_P2.41x1.98mm_MountingHoles
+62-pin D-Sub connector, straight/vertical, THT-mount, socket (female), pitch 2.41x1.98mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
+62-pin D-Sub connector straight vertical THT socket pitch 2.41x1.98mm mounting holes distance 63.5mm
+0
+64
+63
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11004_1x04-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 4 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+6
+5
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11005_1x05-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 5 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+7
+6
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11006_1x06-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 6 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+8
+7
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11007_1x07-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 7 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+9
+8
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11008_1x08-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 8 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+10
+9
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11009_1x09-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 9 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+11
+10
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11010_1x10-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 10 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+12
+11
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11011_1x11-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 11 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+13
+12
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11012_1x12-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 12 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+14
+13
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11013_1x13-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 13 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+15
+14
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11014_1x14-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 14 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+16
+15
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11015_1x15-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 15 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+17
+16
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11016_1x16-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 16 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+18
+17
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11017_1x17-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 17 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+19
+18
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11018_1x18-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 18 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+20
+19
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11019_1x19-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 19 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+21
+20
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11020_1x20-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 20 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+22
+21
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11021_1x21-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 21 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+23
+22
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11022_1x22-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 22 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+24
+23
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11023_1x23-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 23 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+25
+24
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11024_1x24-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 24 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+26
+25
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11025_1x25-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 25 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+27
+26
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11026_1x26-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 26 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+28
+27
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11027_1x27-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 27 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+29
+28
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11028_1x28-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 28 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+30
+29
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11029_1x29-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 29 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+31
+30
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11030_1x30-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 30 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+32
+31
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11031_1x31-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 31 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+33
+32
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11032_1x32-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 32 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+34
+33
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11033_1x33-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 33 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+35
+34
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11034_1x34-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 34 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+36
+35
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11035_1x35-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 35 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+37
+36
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11036_1x36-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 36 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+38
+37
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11037_1x37-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 37 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+39
+38
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11038_1x38-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 38 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+40
+39
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11039_1x39-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 39 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+41
+40
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11040_1x40-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 40 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+42
+41
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11041_1x41-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 41 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+43
+42
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11042_1x42-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 42 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+44
+43
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11043_1x43-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 43 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+45
+44
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11044_1x44-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 44 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+46
+45
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11045_1x45-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 45 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+47
+46
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11046_1x46-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 46 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+48
+47
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11047_1x47-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 47 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+49
+48
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11048_1x48-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 48 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+50
+49
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11049_1x49-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 49 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+51
+50
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11050_1x50-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 50 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+52
+51
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11051_1x51-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 51 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+53
+52
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11052_1x52-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 52 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+54
+53
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11053_1x53-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 53 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+55
+54
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11054_1x54-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 54 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+56
+55
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11055_1x55-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 55 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+57
+56
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11056_1x56-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 56 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+58
+57
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11057_1x57-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 57 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+59
+58
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11058_1x58-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 58 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+60
+59
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11059_1x59-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 59 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+61
+60
+Connector_FFC-FPC
+Amphenol_F32Q-1A7x1-11060_1x60-1MP_P0.5mm_Horizontal
+Amphenol F32Q/T FPC connector, 60 top-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32q-f32t.pdf
+F32T
+0
+62
+61
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11004_1x04-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 4 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+6
+5
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11005_1x05-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 5 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+7
+6
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11006_1x06-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 6 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+8
+7
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11007_1x07-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 7 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+9
+8
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11008_1x08-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 8 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+10
+9
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11009_1x09-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 9 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+11
+10
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11010_1x10-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 10 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+12
+11
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11011_1x11-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 11 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+13
+12
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11012_1x12-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 12 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+14
+13
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11013_1x13-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 13 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+15
+14
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11014_1x14-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 14 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+16
+15
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11015_1x15-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 15 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+17
+16
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11016_1x16-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 16 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+18
+17
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11017_1x17-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 17 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+19
+18
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11018_1x18-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 18 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+20
+19
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11019_1x19-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 19 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+21
+20
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11020_1x20-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 20 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+22
+21
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11021_1x21-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 21 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+23
+22
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11022_1x22-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 22 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+24
+23
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11023_1x23-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 23 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+25
+24
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11024_1x24-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 24 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+26
+25
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11025_1x25-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 25 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+27
+26
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11026_1x26-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 26 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+28
+27
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11027_1x27-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 27 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+29
+28
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11028_1x28-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 28 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+30
+29
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11029_1x29-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 29 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+31
+30
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11030_1x30-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 30 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+32
+31
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11031_1x31-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 31 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+33
+32
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11032_1x32-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 32 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+34
+33
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11033_1x33-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 33 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+35
+34
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11034_1x34-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 34 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+36
+35
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11035_1x35-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 35 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+37
+36
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11036_1x36-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 36 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+38
+37
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11037_1x37-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 37 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+39
+38
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11038_1x38-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 38 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+40
+39
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11039_1x39-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 39 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+41
+40
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11040_1x40-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 40 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+42
+41
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11041_1x41-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 41 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+43
+42
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11042_1x42-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 42 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+44
+43
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11043_1x43-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 43 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+45
+44
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11044_1x44-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 44 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+46
+45
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11045_1x45-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 45 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+47
+46
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11046_1x46-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 46 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+48
+47
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11047_1x47-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 47 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+49
+48
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11048_1x48-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 48 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+50
+49
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11049_1x49-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 49 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+51
+50
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11050_1x50-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 50 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+52
+51
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11051_1x51-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 51 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+53
+52
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11052_1x52-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 52 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+54
+53
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11053_1x53-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 53 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+55
+54
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11054_1x54-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 54 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+56
+55
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11055_1x55-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 55 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+57
+56
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11056_1x56-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 56 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+58
+57
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11057_1x57-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 57 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+59
+58
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11058_1x58-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 58 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+60
+59
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11059_1x59-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 59 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+61
+60
+Connector_FFC-FPC
+Amphenol_F32R-1A7x1-11060_1x60-1MP_P0.5mm_Horizontal
+Amphenol F32R/J FPC connector, 60 bottom-side contacts, 0.5mm pitch, SMT, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/f32r-f32j.pdf
+F32J
+0
+62
+61
+Connector_FFC-FPC
+Hirose_FH12-6S-0.5SH_1x06-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-6S-0.5SH, 6 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+8
+7
+Connector_FFC-FPC
+Hirose_FH12-8S-0.5SH_1x08-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-8S-0.5SH, 8 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+10
+9
+Connector_FFC-FPC
+Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-10S-0.5SH, 10 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+12
+11
+Connector_FFC-FPC
+Hirose_FH12-11S-0.5SH_1x11-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-11S-0.5SH, 11 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+13
+12
+Connector_FFC-FPC
+Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-12S-0.5SH, 12 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+14
+13
+Connector_FFC-FPC
+Hirose_FH12-13S-0.5SH_1x13-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-13S-0.5SH, 13 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+15
+14
+Connector_FFC-FPC
+Hirose_FH12-14S-0.5SH_1x14-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-14S-0.5SH, 14 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+16
+15
+Connector_FFC-FPC
+Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-15S-0.5SH, 15 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+17
+16
+Connector_FFC-FPC
+Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-16S-0.5SH, 16 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+18
+17
+Connector_FFC-FPC
+Hirose_FH12-17S-0.5SH_1x17-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-17S-0.5SH, 17 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+19
+18
+Connector_FFC-FPC
+Hirose_FH12-18S-0.5SH_1x18-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-18S-0.5SH, 18 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+20
+19
+Connector_FFC-FPC
+Hirose_FH12-19S-0.5SH_1x19-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-19S-0.5SH, 19 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+21
+20
+Connector_FFC-FPC
+Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-20S-0.5SH, 20 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+22
+21
+Connector_FFC-FPC
+Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-22S-0.5SH, 22 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+24
+23
+Connector_FFC-FPC
+Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-24S-0.5SH, 24 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+26
+25
+Connector_FFC-FPC
+Hirose_FH12-25S-0.5SH_1x25-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-25S-0.5SH, 25 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+27
+26
+Connector_FFC-FPC
+Hirose_FH12-26S-0.5SH_1x26-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-26S-0.5SH, 26 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+28
+27
+Connector_FFC-FPC
+Hirose_FH12-28S-0.5SH_1x28-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-28S-0.5SH, 28 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+30
+29
+Connector_FFC-FPC
+Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-30S-0.5SH, 30 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+32
+31
+Connector_FFC-FPC
+Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-32S-0.5SH, 32 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+34
+33
+Connector_FFC-FPC
+Hirose_FH12-33S-0.5SH_1x33-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-33S-0.5SH, 33 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+35
+34
+Connector_FFC-FPC
+Hirose_FH12-34S-0.5SH_1x34-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-34S-0.5SH, 34 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+36
+35
+Connector_FFC-FPC
+Hirose_FH12-35S-0.5SH_1x35-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-35S-0.5SH, 35 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+37
+36
+Connector_FFC-FPC
+Hirose_FH12-36S-0.5SH_1x36-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-36S-0.5SH, 36 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+38
+37
+Connector_FFC-FPC
+Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-40S-0.5SH, 40 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+42
+41
+Connector_FFC-FPC
+Hirose_FH12-45S-0.5SH_1x45-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-45S-0.5SH, 45 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+47
+46
+Connector_FFC-FPC
+Hirose_FH12-50S-0.5SH_1x50-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-50S-0.5SH, 50 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+52
+51
+Connector_FFC-FPC
+Hirose_FH12-53S-0.5SH_1x53-1MP_P0.50mm_Horizontal
+Hirose FH12, FFC/FPC connector, FH12-53S-0.5SH, 53 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator
+connector Hirose FH12 horizontal
+0
+55
+54
+Connector_FFC-FPC
+Hirose_FH26-13S-0.3SHW_2Rows-13Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-13S-0.3SHW, 13 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+15
+14
+Connector_FFC-FPC
+Hirose_FH26-15S-0.3SHW_2Rows-15Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-15S-0.3SHW, 15 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+17
+16
+Connector_FFC-FPC
+Hirose_FH26-17S-0.3SHW_2Rows-17Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-17S-0.3SHW, 17 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+19
+18
+Connector_FFC-FPC
+Hirose_FH26-19S-0.3SHW_2Rows-19Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-19S-0.3SHW, 19 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+21
+20
+Connector_FFC-FPC
+Hirose_FH26-21S-0.3SHW_2Rows-21Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-21S-0.3SHW, 21 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+23
+22
+Connector_FFC-FPC
+Hirose_FH26-23S-0.3SHW_2Rows-23Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-23S-0.3SHW, 23 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+25
+24
+Connector_FFC-FPC
+Hirose_FH26-25S-0.3SHW_2Rows-25Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-25S-0.3SHW, 25 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+27
+26
+Connector_FFC-FPC
+Hirose_FH26-27S-0.3SHW_2Rows-27Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-27S-0.3SHW, 27 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+29
+28
+Connector_FFC-FPC
+Hirose_FH26-29S-0.3SHW_2Rows-29Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-29S-0.3SHW, 29 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+31
+30
+Connector_FFC-FPC
+Hirose_FH26-31S-0.3SHW_2Rows-31Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-31S-0.3SHW, 31 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+33
+32
+Connector_FFC-FPC
+Hirose_FH26-33S-0.3SHW_2Rows-33Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-33S-0.3SHW, 33 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+35
+34
+Connector_FFC-FPC
+Hirose_FH26-35S-0.3SHW_2Rows-35Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-35S-0.3SHW, 35 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+37
+36
+Connector_FFC-FPC
+Hirose_FH26-37S-0.3SHW_2Rows-37Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-37S-0.3SHW, 37 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+39
+38
+Connector_FFC-FPC
+Hirose_FH26-39S-0.3SHW_2Rows-39Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-39S-0.3SHW, 39 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+41
+40
+Connector_FFC-FPC
+Hirose_FH26-41S-0.3SHW_2Rows-41Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-41S-0.3SHW, 41 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+43
+42
+Connector_FFC-FPC
+Hirose_FH26-45S-0.3SHW_2Rows-45Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-45S-0.3SHW, 45 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+47
+46
+Connector_FFC-FPC
+Hirose_FH26-51S-0.3SHW_2Rows-51Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-51S-0.3SHW, 51 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+53
+52
+Connector_FFC-FPC
+Hirose_FH26-55S-0.3SHW_2Rows-55Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-55S-0.3SHW, 55 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+57
+56
+Connector_FFC-FPC
+Hirose_FH26-57S-0.3SHW_2Rows-57Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-57S-0.3SHW, 57 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+59
+58
+Connector_FFC-FPC
+Hirose_FH26-61S-0.3SHW_2Rows-61Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-61S-0.3SHW, 61 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+63
+62
+Connector_FFC-FPC
+Hirose_FH26-71S-0.3SHW_2Rows-71Pins-1MP_P0.60mm_Horizontal
+Hirose 0.30mm Pitch FFC/FPC, FH26-71S-0.3SHW, 71 Circuits (https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+73
+72
+Connector_FFC-FPC
+Hirose_FH41-30S-0.5SH_1x30_1MP_1SH_P0.5mm_Horizontal
+Hirose FH41, FFC/FPC connector, FH41-30S-0.5SH, 30 Pins per row (https://www.hirose.com/fr/product/document?clcode=CL0580-2218-5-05&productname=FH41-30S-0.5SH(05)&series=FH41&documenttype=2DDrawing&lang=fr&documentid=0001001704)
+connector Hirose FH41 horizontal
+0
+38
+32
+Connector_FFC-FPC
+JAE_FF0825SA1_2Rows-25Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0825SA1, 25 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+25
+25
+Connector_FFC-FPC
+JAE_FF0829SA1_2Rows-29Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0829SA1, 29 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+29
+29
+Connector_FFC-FPC
+JAE_FF0841SA1_2Rows-41Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0841SA1, 41 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+41
+41
+Connector_FFC-FPC
+JAE_FF0851SA1_2Rows-51Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0851SA1, 51 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+51
+51
+Connector_FFC-FPC
+JAE_FF0871SA1_2Rows-71Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0871SA1, 71 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+71
+71
+Connector_FFC-FPC
+JAE_FF0881SA1_2Rows-81Pins_P0.40mm_Horizontal
+Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0881SA1, 81 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+81
+81
+Connector_FFC-FPC
+JUSHUO_AFA07-S04FCA-00_1x4-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 04 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+6
+5
+Connector_FFC-FPC
+JUSHUO_AFA07-S05FCA-00_1x5-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 05 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+7
+6
+Connector_FFC-FPC
+JUSHUO_AFA07-S06FCA-00_1x6-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 06 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+8
+7
+Connector_FFC-FPC
+JUSHUO_AFA07-S07FCA-00_1x7-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 07 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+9
+8
+Connector_FFC-FPC
+JUSHUO_AFA07-S08FCA-00_1x8-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 08 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+10
+9
+Connector_FFC-FPC
+JUSHUO_AFA07-S09FCA-00_1x9-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 09 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+11
+10
+Connector_FFC-FPC
+JUSHUO_AFA07-S10FCA-00_1x10-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 10 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+12
+11
+Connector_FFC-FPC
+JUSHUO_AFA07-S11FCA-00_1x11-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 11 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+13
+12
+Connector_FFC-FPC
+JUSHUO_AFA07-S12FCA-00_1x12-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 12 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+14
+13
+Connector_FFC-FPC
+JUSHUO_AFA07-S13FCA-00_1x13-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 13 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+15
+14
+Connector_FFC-FPC
+JUSHUO_AFA07-S14FCA-00_1x14-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 14 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+16
+15
+Connector_FFC-FPC
+JUSHUO_AFA07-S15FCA-00_1x15-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 15 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+17
+16
+Connector_FFC-FPC
+JUSHUO_AFA07-S16FCA-00_1x16-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 16 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+18
+17
+Connector_FFC-FPC
+JUSHUO_AFA07-S17FCA-00_1x17-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 17 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+19
+18
+Connector_FFC-FPC
+JUSHUO_AFA07-S18FCA-00_1x18-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 18 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+20
+19
+Connector_FFC-FPC
+JUSHUO_AFA07-S19FCA-00_1x19-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 19 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+21
+20
+Connector_FFC-FPC
+JUSHUO_AFA07-S20FCA-00_1x20-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 20 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+22
+21
+Connector_FFC-FPC
+JUSHUO_AFA07-S21FCA-00_1x21-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 21 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+23
+22
+Connector_FFC-FPC
+JUSHUO_AFA07-S22FCA-00_1x22-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 22 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+24
+23
+Connector_FFC-FPC
+JUSHUO_AFA07-S23FCA-00_1x23-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 23 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+25
+24
+Connector_FFC-FPC
+JUSHUO_AFA07-S24FCA-00_1x24-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 24 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+26
+25
+Connector_FFC-FPC
+JUSHUO_AFA07-S25FCA-00_1x25-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 25 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+27
+26
+Connector_FFC-FPC
+JUSHUO_AFA07-S26FCA-00_1x26-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 26 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+28
+27
+Connector_FFC-FPC
+JUSHUO_AFA07-S27FCA-00_1x27-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 27 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+29
+28
+Connector_FFC-FPC
+JUSHUO_AFA07-S28FCA-00_1x28-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 28 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+30
+29
+Connector_FFC-FPC
+JUSHUO_AFA07-S29FCA-00_1x29-1MP_P1.0mm_Horizontal
+JUSHUO FPC connector, 29 bottom-side contacts, 1.0mm pitch, 2.5mm height, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2304140030_JUSHUO-AFA07-S04FCA-00_C262710.pdf
+jushuo fpc
+0
+31
+30
+Connector_FFC-FPC
+Jushuo_AFC07-S06FCA-00_1x6-1MP_P0.50_Horizontal
+Jushuo AFC07, FFC/FPC connector, AFC07-S06FCA-00, 6 Pins per row (https://datasheet.lcsc.com/lcsc/1811040204_JUSHUO-AFC07-S32FCC-00_C11061.pdf)
+connector jushuo horizontal
+0
+8
+7
+Connector_FFC-FPC
+Jushuo_AFC07-S24FCA-00_1x24-1MP_P0.50_Horizontal
+Jushuo AFC07, FFC/FPC connector, AFC07-S24FCA-00, 24 Pins per row (https://datasheet.lcsc.com/lcsc/1811040204_JUSHUO-AFC07-S32FCC-00_C11061.pdf)
+connector jushuo horizontal
+0
+26
+25
+Connector_FFC-FPC
+Molex_52559-3652_2x18-1MP_P0.5mm_Vertical
+Molex 0.50mm Pitch Easy-On Type FFC/FPC, 52559-3652, 36 Circuits (https://www.molex.com/pdm_docs/sd/525593652_sd.pdf)
+connector Molex top entry
+0
+40
+37
+Connector_FFC-FPC
+Molex_54132-5033_1x50-1MP_P0.5mm_Horizontal
+Molex FFC/FPC connector, 50 bottom-side contacts, 0.5mm pitch, 2.0mm height, https://www.molex.com/pdm_docs/sd/541325033_sd.pdf
+FFC FPC
+0
+54
+51
+Connector_FFC-FPC
+Molex_54548-1071_1x10-1MP_P0.5mm_Horizontal
+Molex FFC/FPC connector, 10 bottom-side contacts, 0.5mm pitch, 1.2mm height, https://www.molex.com/pdm_docs/sd/545481071_sd.pdf
+FFC FPC connector
+0
+12
+11
+Connector_FFC-FPC
+Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0040, 4 Circuits (https://www.molex.com/pdm_docs/sd/2005280040_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+6
+5
+Connector_FFC-FPC
+Molex_200528-0050_1x05-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0050, 5 Circuits (https://www.molex.com/pdm_docs/sd/2005280050_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+7
+6
+Connector_FFC-FPC
+Molex_200528-0060_1x06-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0060, 6 Circuits (https://www.molex.com/pdm_docs/sd/2005280060_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+8
+7
+Connector_FFC-FPC
+Molex_200528-0070_1x07-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0070, 7 Circuits (https://www.molex.com/pdm_docs/sd/2005280070_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+9
+8
+Connector_FFC-FPC
+Molex_200528-0080_1x08-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0080, 8 Circuits (https://www.molex.com/pdm_docs/sd/2005280080_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+10
+9
+Connector_FFC-FPC
+Molex_200528-0090_1x09-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0090, 9 Circuits (https://www.molex.com/pdm_docs/sd/2005280090_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+11
+10
+Connector_FFC-FPC
+Molex_200528-0100_1x10-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0100, 10 Circuits (https://www.molex.com/pdm_docs/sd/2005280100_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+12
+11
+Connector_FFC-FPC
+Molex_200528-0110_1x11-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0110, 11 Circuits (https://www.molex.com/pdm_docs/sd/2005280110_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+13
+12
+Connector_FFC-FPC
+Molex_200528-0120_1x12-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0120, 12 Circuits (https://www.molex.com/pdm_docs/sd/2005280120_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+14
+13
+Connector_FFC-FPC
+Molex_200528-0130_1x13-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0130, 13 Circuits (https://www.molex.com/pdm_docs/sd/2005280130_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+15
+14
+Connector_FFC-FPC
+Molex_200528-0140_1x14-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0140, 14 Circuits (https://www.molex.com/pdm_docs/sd/2005280140_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+16
+15
+Connector_FFC-FPC
+Molex_200528-0150_1x15-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0150, 15 Circuits (https://www.molex.com/pdm_docs/sd/2005280150_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+17
+16
+Connector_FFC-FPC
+Molex_200528-0160_1x16-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0160, 16 Circuits (https://www.molex.com/pdm_docs/sd/2005280160_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+18
+17
+Connector_FFC-FPC
+Molex_200528-0170_1x17-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0170, 17 Circuits (https://www.molex.com/pdm_docs/sd/2005280170_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+19
+18
+Connector_FFC-FPC
+Molex_200528-0180_1x18-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0180, 18 Circuits (https://www.molex.com/pdm_docs/sd/2005280180_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+20
+19
+Connector_FFC-FPC
+Molex_200528-0190_1x19-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0190, 19 Circuits (https://www.molex.com/pdm_docs/sd/2005280190_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+21
+20
+Connector_FFC-FPC
+Molex_200528-0200_1x20-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0200, 20 Circuits (https://www.molex.com/pdm_docs/sd/2005280200_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+22
+21
+Connector_FFC-FPC
+Molex_200528-0210_1x21-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0210, 21 Circuits (https://www.molex.com/pdm_docs/sd/2005280210_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+23
+22
+Connector_FFC-FPC
+Molex_200528-0220_1x22-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0220, 22 Circuits (https://www.molex.com/pdm_docs/sd/2005280220_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+24
+23
+Connector_FFC-FPC
+Molex_200528-0230_1x23-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0230, 23 Circuits (https://www.molex.com/pdm_docs/sd/2005280230_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+25
+24
+Connector_FFC-FPC
+Molex_200528-0240_1x24-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0240, 24 Circuits (https://www.molex.com/pdm_docs/sd/2005280240_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+26
+25
+Connector_FFC-FPC
+Molex_200528-0250_1x25-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0250, 25 Circuits (https://www.molex.com/pdm_docs/sd/2005280250_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+27
+26
+Connector_FFC-FPC
+Molex_200528-0260_1x26-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0260, 26 Circuits (https://www.molex.com/pdm_docs/sd/2005280260_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+28
+27
+Connector_FFC-FPC
+Molex_200528-0270_1x27-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0270, 27 Circuits (https://www.molex.com/pdm_docs/sd/2005280270_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+29
+28
+Connector_FFC-FPC
+Molex_200528-0280_1x28-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0280, 28 Circuits (https://www.molex.com/pdm_docs/sd/2005280280_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+30
+29
+Connector_FFC-FPC
+Molex_200528-0290_1x29-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0290, 29 Circuits (https://www.molex.com/pdm_docs/sd/2005280290_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+31
+30
+Connector_FFC-FPC
+Molex_200528-0300_1x30-1MP_P1.00mm_Horizontal
+Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0300, 30 Circuits (https://www.molex.com/pdm_docs/sd/2005280300_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+32
+31
+Connector_FFC-FPC
+Molex_502231-1500_1x15-1SH_P0.5mm_Vertical
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 15 Circuits (https://www.molex.com/pdm_docs/sd/5022311500_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm vertical
+0
+17
+16
+Connector_FFC-FPC
+Molex_502231-2400_1x24-1SH_P0.5mm_Vertical
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 24 Circuits (https://www.molex.com/pdm_docs/sd/5022312400_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm vertical
+0
+26
+25
+Connector_FFC-FPC
+Molex_502231-3300_1x33-1SH_P0.5mm_Vertical
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 33 Circuits (https://www.molex.com/pdm_docs/sd/5022313300_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm vertical
+0
+36
+34
+Connector_FFC-FPC
+Molex_502244-1530_1x15-1MP_P0.5mm_Horizontal
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 15 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm right angle
+0
+19
+16
+Connector_FFC-FPC
+Molex_502244-2430_1x24-1MP_P0.5mm_Horizontal
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 24 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm right angle
+0
+28
+25
+Connector_FFC-FPC
+Molex_502244-3330_1x33-1MP_P0.5mm_Horizontal
+Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 33 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf)
+molex FFC/FPC connector Pitch 0.5mm right angle
+0
+39
+34
+Connector_FFC-FPC
+Molex_502250-1791_2Rows-17Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-1791, 17 Circuits (http://www.molex.com/pdm_docs/sd/5022501791_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+19
+18
+Connector_FFC-FPC
+Molex_502250-2191_2Rows-21Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2191, 21 Circuits (http://www.molex.com/pdm_docs/sd/5022502191_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+23
+22
+Connector_FFC-FPC
+Molex_502250-2391_2Rows-23Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2391, 23 Circuits (http://www.molex.com/pdm_docs/sd/5022502391_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+25
+24
+Connector_FFC-FPC
+Molex_502250-2791_2Rows-27Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2791, 27 Circuits (http://www.molex.com/pdm_docs/sd/5022502791_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+29
+28
+Connector_FFC-FPC
+Molex_502250-3391_2Rows-33Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3391, 33 Circuits (http://www.molex.com/pdm_docs/sd/5022503391_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+35
+34
+Connector_FFC-FPC
+Molex_502250-3591_2Rows-35Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3591, 35 Circuits (http://www.molex.com/pdm_docs/sd/5022503591_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+37
+36
+Connector_FFC-FPC
+Molex_502250-3991_2Rows-39Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3991, 39 Circuits (http://www.molex.com/pdm_docs/sd/5022503991_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+41
+40
+Connector_FFC-FPC
+Molex_502250-4191_2Rows-41Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-4191, 41 Circuits (http://www.molex.com/pdm_docs/sd/5022504191_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+43
+42
+Connector_FFC-FPC
+Molex_502250-5191_2Rows-51Pins-1MP_P0.60mm_Horizontal
+Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-5191, 51 Circuits (http://www.molex.com/pdm_docs/sd/5022505191_sd.pdf), generated with kicad-footprint-generator
+connector Molex  horizontal
+0
+53
+52
+Connector_FFC-FPC
+Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal
+Omron FPC connector, 40 top-side contacts, 0.5mm pitch, SMT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-xf2m.pdf
+omron fpc xf2m
+0
+42
+41
+Connector_FFC-FPC
+TE_0-1734839-5_1x05-1MP_P0.5mm_Horizontal
+TE FPC connector, 05 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+7
+6
+Connector_FFC-FPC
+TE_0-1734839-6_1x06-1MP_P0.5mm_Horizontal
+TE FPC connector, 06 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+8
+7
+Connector_FFC-FPC
+TE_0-1734839-7_1x07-1MP_P0.5mm_Horizontal
+TE FPC connector, 07 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+9
+8
+Connector_FFC-FPC
+TE_0-1734839-8_1x08-1MP_P0.5mm_Horizontal
+TE FPC connector, 08 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+10
+9
+Connector_FFC-FPC
+TE_0-1734839-9_1x09-1MP_P0.5mm_Horizontal
+TE FPC connector, 09 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+11
+10
+Connector_FFC-FPC
+TE_1-84952-0_1x10-1MP_P1.0mm_Horizontal
+TE FPC connector, 10 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+12
+11
+Connector_FFC-FPC
+TE_1-84952-1_1x11-1MP_P1.0mm_Horizontal
+TE FPC connector, 11 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+13
+12
+Connector_FFC-FPC
+TE_1-84952-2_1x12-1MP_P1.0mm_Horizontal
+TE FPC connector, 12 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+14
+13
+Connector_FFC-FPC
+TE_1-84952-3_1x13-1MP_P1.0mm_Horizontal
+TE FPC connector, 13 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+15
+14
+Connector_FFC-FPC
+TE_1-84952-4_1x14-1MP_P1.0mm_Horizontal
+TE FPC connector, 14 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+16
+15
+Connector_FFC-FPC
+TE_1-84952-5_1x15-1MP_P1.0mm_Horizontal
+TE FPC connector, 15 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+17
+16
+Connector_FFC-FPC
+TE_1-84952-6_1x16-1MP_P1.0mm_Horizontal
+TE FPC connector, 16 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+18
+17
+Connector_FFC-FPC
+TE_1-84952-7_1x17-1MP_P1.0mm_Horizontal
+TE FPC connector, 17 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+19
+18
+Connector_FFC-FPC
+TE_1-84952-8_1x18-1MP_P1.0mm_Horizontal
+TE FPC connector, 18 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+20
+19
+Connector_FFC-FPC
+TE_1-84952-9_1x19-1MP_P1.0mm_Horizontal
+TE FPC connector, 19 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+21
+20
+Connector_FFC-FPC
+TE_1-84953-0_1x10-1MP_P1.0mm_Horizontal
+TE FPC connector, 10 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+12
+11
+Connector_FFC-FPC
+TE_1-84953-1_1x11-1MP_P1.0mm_Horizontal
+TE FPC connector, 11 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+13
+12
+Connector_FFC-FPC
+TE_1-84953-2_1x12-1MP_P1.0mm_Horizontal
+TE FPC connector, 12 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+14
+13
+Connector_FFC-FPC
+TE_1-84953-3_1x13-1MP_P1.0mm_Horizontal
+TE FPC connector, 13 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+15
+14
+Connector_FFC-FPC
+TE_1-84953-4_1x14-1MP_P1.0mm_Horizontal
+TE FPC connector, 14 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+16
+15
+Connector_FFC-FPC
+TE_1-84953-5_1x15-1MP_P1.0mm_Horizontal
+TE FPC connector, 15 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+17
+16
+Connector_FFC-FPC
+TE_1-84953-6_1x16-1MP_P1.0mm_Horizontal
+TE FPC connector, 16 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+18
+17
+Connector_FFC-FPC
+TE_1-84953-7_1x17-1MP_P1.0mm_Horizontal
+TE FPC connector, 17 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+19
+18
+Connector_FFC-FPC
+TE_1-84953-8_1x18-1MP_P1.0mm_Horizontal
+TE FPC connector, 18 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+20
+19
+Connector_FFC-FPC
+TE_1-84953-9_1x19-1MP_P1.0mm_Horizontal
+TE FPC connector, 19 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+21
+20
+Connector_FFC-FPC
+TE_1-84982-0_2Rows-10Pins-P1.0mm_Vertical
+TE FPC connector, 10 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-0 vertical
+0
+10
+10
+Connector_FFC-FPC
+TE_1-84982-1_2Rows-11Pins-P1.0mm_Vertical
+TE FPC connector, 11 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-1 vertical
+0
+11
+11
+Connector_FFC-FPC
+TE_1-84982-2_2Rows-12Pins-P1.0mm_Vertical
+TE FPC connector, 12 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-2 vertical
+0
+12
+12
+Connector_FFC-FPC
+TE_1-84982-3_2Rows-13Pins-P1.0mm_Vertical
+TE FPC connector, 13 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-3 vertical
+0
+13
+13
+Connector_FFC-FPC
+TE_1-84982-4_2Rows-14Pins-P1.0mm_Vertical
+TE FPC connector, 14 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-4 vertical
+0
+14
+14
+Connector_FFC-FPC
+TE_1-84982-5_2Rows-15Pins-P1.0mm_Vertical
+TE FPC connector, 15 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-5 vertical
+0
+15
+15
+Connector_FFC-FPC
+TE_1-84982-6_2Rows-16Pins-P1.0mm_Vertical
+TE FPC connector, 16 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-6 vertical
+0
+16
+16
+Connector_FFC-FPC
+TE_1-84982-7_2Rows-17Pins-P1.0mm_Vertical
+TE FPC connector, 17 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-7 vertical
+0
+17
+17
+Connector_FFC-FPC
+TE_1-84982-8_2Rows-18Pins-P1.0mm_Vertical
+TE FPC connector, 18 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-8 vertical
+0
+18
+18
+Connector_FFC-FPC
+TE_1-84982-9_2Rows-19Pins-P1.0mm_Vertical
+TE FPC connector, 19 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+1-84982-9 vertical
+0
+19
+19
+Connector_FFC-FPC
+TE_1-1734839-0_1x10-1MP_P0.5mm_Horizontal
+TE FPC connector, 10 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+12
+11
+Connector_FFC-FPC
+TE_1-1734839-1_1x11-1MP_P0.5mm_Horizontal
+TE FPC connector, 11 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+13
+12
+Connector_FFC-FPC
+TE_1-1734839-2_1x12-1MP_P0.5mm_Horizontal
+TE FPC connector, 12 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+14
+13
+Connector_FFC-FPC
+TE_1-1734839-3_1x13-1MP_P0.5mm_Horizontal
+TE FPC connector, 13 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+15
+14
+Connector_FFC-FPC
+TE_1-1734839-4_1x14-1MP_P0.5mm_Horizontal
+TE FPC connector, 14 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+16
+15
+Connector_FFC-FPC
+TE_1-1734839-5_1x15-1MP_P0.5mm_Horizontal
+TE FPC connector, 15 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+17
+16
+Connector_FFC-FPC
+TE_1-1734839-6_1x16-1MP_P0.5mm_Horizontal
+TE FPC connector, 16 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+18
+17
+Connector_FFC-FPC
+TE_1-1734839-7_1x17-1MP_P0.5mm_Horizontal
+TE FPC connector, 17 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+19
+18
+Connector_FFC-FPC
+TE_1-1734839-8_1x18-1MP_P0.5mm_Horizontal
+TE FPC connector, 18 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+20
+19
+Connector_FFC-FPC
+TE_1-1734839-9_1x19-1MP_P0.5mm_Horizontal
+TE FPC connector, 19 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+21
+20
+Connector_FFC-FPC
+TE_2-84952-0_1x20-1MP_P1.0mm_Horizontal
+TE FPC connector, 20 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+22
+21
+Connector_FFC-FPC
+TE_2-84952-1_1x21-1MP_P1.0mm_Horizontal
+TE FPC connector, 21 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+23
+22
+Connector_FFC-FPC
+TE_2-84952-2_1x22-1MP_P1.0mm_Horizontal
+TE FPC connector, 22 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+24
+23
+Connector_FFC-FPC
+TE_2-84952-3_1x23-1MP_P1.0mm_Horizontal
+TE FPC connector, 23 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+25
+24
+Connector_FFC-FPC
+TE_2-84952-4_1x24-1MP_P1.0mm_Horizontal
+TE FPC connector, 24 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+26
+25
+Connector_FFC-FPC
+TE_2-84952-5_1x25-1MP_P1.0mm_Horizontal
+TE FPC connector, 25 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+27
+26
+Connector_FFC-FPC
+TE_2-84952-6_1x26-1MP_P1.0mm_Horizontal
+TE FPC connector, 26 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+28
+27
+Connector_FFC-FPC
+TE_2-84952-7_1x27-1MP_P1.0mm_Horizontal
+TE FPC connector, 27 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+29
+28
+Connector_FFC-FPC
+TE_2-84952-8_1x28-1MP_P1.0mm_Horizontal
+TE FPC connector, 28 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+30
+29
+Connector_FFC-FPC
+TE_2-84952-9_1x29-1MP_P1.0mm_Horizontal
+TE FPC connector, 29 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+31
+30
+Connector_FFC-FPC
+TE_2-84953-0_1x20-1MP_P1.0mm_Horizontal
+TE FPC connector, 20 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+22
+21
+Connector_FFC-FPC
+TE_2-84953-1_1x21-1MP_P1.0mm_Horizontal
+TE FPC connector, 21 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+23
+22
+Connector_FFC-FPC
+TE_2-84953-2_1x22-1MP_P1.0mm_Horizontal
+TE FPC connector, 22 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+24
+23
+Connector_FFC-FPC
+TE_2-84953-3_1x23-1MP_P1.0mm_Horizontal
+TE FPC connector, 23 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+25
+24
+Connector_FFC-FPC
+TE_2-84953-4_1x24-1MP_P1.0mm_Horizontal
+TE FPC connector, 24 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+26
+25
+Connector_FFC-FPC
+TE_2-84953-5_1x25-1MP_P1.0mm_Horizontal
+TE FPC connector, 25 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+27
+26
+Connector_FFC-FPC
+TE_2-84953-6_1x26-1MP_P1.0mm_Horizontal
+TE FPC connector, 26 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+28
+27
+Connector_FFC-FPC
+TE_2-84953-7_1x27-1MP_P1.0mm_Horizontal
+TE FPC connector, 27 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+29
+28
+Connector_FFC-FPC
+TE_2-84953-8_1x28-1MP_P1.0mm_Horizontal
+TE FPC connector, 28 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+30
+29
+Connector_FFC-FPC
+TE_2-84953-9_1x29-1MP_P1.0mm_Horizontal
+TE FPC connector, 29 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+31
+30
+Connector_FFC-FPC
+TE_2-84982-0_2Rows-20Pins-P1.0mm_Vertical
+TE FPC connector, 20 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-0 vertical
+0
+20
+20
+Connector_FFC-FPC
+TE_2-84982-1_2Rows-21Pins-P1.0mm_Vertical
+TE FPC connector, 21 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-1 vertical
+0
+21
+21
+Connector_FFC-FPC
+TE_2-84982-2_2Rows-22Pins-P1.0mm_Vertical
+TE FPC connector, 22 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-2 vertical
+0
+22
+22
+Connector_FFC-FPC
+TE_2-84982-3_2Rows-23Pins-P1.0mm_Vertical
+TE FPC connector, 23 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-3 vertical
+0
+23
+23
+Connector_FFC-FPC
+TE_2-84982-4_2Rows-24Pins-P1.0mm_Vertical
+TE FPC connector, 24 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-4 vertical
+0
+24
+24
+Connector_FFC-FPC
+TE_2-84982-5_2Rows-25Pins-P1.0mm_Vertical
+TE FPC connector, 25 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-5 vertical
+0
+25
+25
+Connector_FFC-FPC
+TE_2-84982-6_2Rows-26Pins-P1.0mm_Vertical
+TE FPC connector, 26 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-6 vertical
+0
+26
+26
+Connector_FFC-FPC
+TE_2-84982-7_2Rows-27Pins-P1.0mm_Vertical
+TE FPC connector, 27 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-7 vertical
+0
+27
+27
+Connector_FFC-FPC
+TE_2-84982-8_2Rows-28Pins-P1.0mm_Vertical
+TE FPC connector, 28 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-8 vertical
+0
+28
+28
+Connector_FFC-FPC
+TE_2-84982-9_2Rows-29Pins-P1.0mm_Vertical
+TE FPC connector, 29 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+2-84982-9 vertical
+0
+29
+29
+Connector_FFC-FPC
+TE_2-1734839-0_1x20-1MP_P0.5mm_Horizontal
+TE FPC connector, 20 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+22
+21
+Connector_FFC-FPC
+TE_2-1734839-1_1x21-1MP_P0.5mm_Horizontal
+TE FPC connector, 21 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+23
+22
+Connector_FFC-FPC
+TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal
+TE FPC connector, 22 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+24
+23
+Connector_FFC-FPC
+TE_2-1734839-3_1x23-1MP_P0.5mm_Horizontal
+TE FPC connector, 23 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+25
+24
+Connector_FFC-FPC
+TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal
+TE FPC connector, 24 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+26
+25
+Connector_FFC-FPC
+TE_2-1734839-5_1x25-1MP_P0.5mm_Horizontal
+TE FPC connector, 25 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+27
+26
+Connector_FFC-FPC
+TE_2-1734839-6_1x26-1MP_P0.5mm_Horizontal
+TE FPC connector, 26 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+28
+27
+Connector_FFC-FPC
+TE_2-1734839-7_1x27-1MP_P0.5mm_Horizontal
+TE FPC connector, 27 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+29
+28
+Connector_FFC-FPC
+TE_2-1734839-8_1x28-1MP_P0.5mm_Horizontal
+TE FPC connector, 28 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+30
+29
+Connector_FFC-FPC
+TE_2-1734839-9_1x29-1MP_P0.5mm_Horizontal
+TE FPC connector, 29 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+31
+30
+Connector_FFC-FPC
+TE_3-84952-0_1x30-1MP_P1.0mm_Horizontal
+TE FPC connector, 30 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+32
+31
+Connector_FFC-FPC
+TE_3-84953-0_1x30-1MP_P1.0mm_Horizontal
+TE FPC connector, 30 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+32
+31
+Connector_FFC-FPC
+TE_3-84982-0_2Rows-30Pins-P1.0mm_Vertical
+TE FPC connector, 30 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+3-84982-0 vertical
+0
+30
+30
+Connector_FFC-FPC
+TE_3-1734839-0_1x30-1MP_P0.5mm_Horizontal
+TE FPC connector, 30 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+32
+31
+Connector_FFC-FPC
+TE_3-1734839-1_1x31-1MP_P0.5mm_Horizontal
+TE FPC connector, 31 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+33
+32
+Connector_FFC-FPC
+TE_3-1734839-2_1x32-1MP_P0.5mm_Horizontal
+TE FPC connector, 32 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+34
+33
+Connector_FFC-FPC
+TE_3-1734839-3_1x33-1MP_P0.5mm_Horizontal
+TE FPC connector, 33 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+35
+34
+Connector_FFC-FPC
+TE_3-1734839-4_1x34-1MP_P0.5mm_Horizontal
+TE FPC connector, 34 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+36
+35
+Connector_FFC-FPC
+TE_3-1734839-5_1x35-1MP_P0.5mm_Horizontal
+TE FPC connector, 35 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+37
+36
+Connector_FFC-FPC
+TE_3-1734839-6_1x36-1MP_P0.5mm_Horizontal
+TE FPC connector, 36 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+38
+37
+Connector_FFC-FPC
+TE_3-1734839-7_1x37-1MP_P0.5mm_Horizontal
+TE FPC connector, 37 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+39
+38
+Connector_FFC-FPC
+TE_3-1734839-8_1x38-1MP_P0.5mm_Horizontal
+TE FPC connector, 38 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+40
+39
+Connector_FFC-FPC
+TE_3-1734839-9_1x39-1MP_P0.5mm_Horizontal
+TE FPC connector, 39 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+41
+40
+Connector_FFC-FPC
+TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal
+TE FPC connector, 40 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+42
+41
+Connector_FFC-FPC
+TE_4-1734839-1_1x41-1MP_P0.5mm_Horizontal
+TE FPC connector, 41 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+43
+42
+Connector_FFC-FPC
+TE_4-1734839-2_1x42-1MP_P0.5mm_Horizontal
+TE FPC connector, 42 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+44
+43
+Connector_FFC-FPC
+TE_4-1734839-3_1x43-1MP_P0.5mm_Horizontal
+TE FPC connector, 43 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+45
+44
+Connector_FFC-FPC
+TE_4-1734839-4_1x44-1MP_P0.5mm_Horizontal
+TE FPC connector, 44 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+46
+45
+Connector_FFC-FPC
+TE_4-1734839-5_1x45-1MP_P0.5mm_Horizontal
+TE FPC connector, 45 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+47
+46
+Connector_FFC-FPC
+TE_4-1734839-6_1x46-1MP_P0.5mm_Horizontal
+TE FPC connector, 46 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+48
+47
+Connector_FFC-FPC
+TE_4-1734839-7_1x47-1MP_P0.5mm_Horizontal
+TE FPC connector, 47 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+49
+48
+Connector_FFC-FPC
+TE_4-1734839-8_1x48-1MP_P0.5mm_Horizontal
+TE FPC connector, 48 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+50
+49
+Connector_FFC-FPC
+TE_4-1734839-9_1x49-1MP_P0.5mm_Horizontal
+TE FPC connector, 49 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+51
+50
+Connector_FFC-FPC
+TE_5-1734839-0_1x50-1MP_P0.5mm_Horizontal
+TE FPC connector, 50 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0
+te fpc 1734839
+0
+52
+51
+Connector_FFC-FPC
+TE_84952-4_1x04-1MP_P1.0mm_Horizontal
+TE FPC connector, 04 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+6
+5
+Connector_FFC-FPC
+TE_84952-5_1x05-1MP_P1.0mm_Horizontal
+TE FPC connector, 05 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+7
+6
+Connector_FFC-FPC
+TE_84952-6_1x06-1MP_P1.0mm_Horizontal
+TE FPC connector, 06 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+8
+7
+Connector_FFC-FPC
+TE_84952-7_1x07-1MP_P1.0mm_Horizontal
+TE FPC connector, 07 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+9
+8
+Connector_FFC-FPC
+TE_84952-8_1x08-1MP_P1.0mm_Horizontal
+TE FPC connector, 08 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+10
+9
+Connector_FFC-FPC
+TE_84952-9_1x09-1MP_P1.0mm_Horizontal
+TE FPC connector, 09 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4
+te fpc 84952
+0
+11
+10
+Connector_FFC-FPC
+TE_84953-4_1x04-1MP_P1.0mm_Horizontal
+TE FPC connector, 04 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+6
+5
+Connector_FFC-FPC
+TE_84953-5_1x05-1MP_P1.0mm_Horizontal
+TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+7
+6
+Connector_FFC-FPC
+TE_84953-6_1x06-1MP_P1.0mm_Horizontal
+TE FPC connector, 06 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+8
+7
+Connector_FFC-FPC
+TE_84953-7_1x07-1MP_P1.0mm_Horizontal
+TE FPC connector, 07 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+9
+8
+Connector_FFC-FPC
+TE_84953-8_1x08-1MP_P1.0mm_Horizontal
+TE FPC connector, 08 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+10
+9
+Connector_FFC-FPC
+TE_84953-9_1x09-1MP_P1.0mm_Horizontal
+TE FPC connector, 09 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4
+te fpc 84953
+0
+11
+10
+Connector_FFC-FPC
+TE_84982-4_2Rows-04Pins-P1.0mm_Vertical
+TE FPC connector, 04 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-4 vertical
+0
+4
+4
+Connector_FFC-FPC
+TE_84982-5_2Rows-05Pins-P1.0mm_Vertical
+TE FPC connector, 05 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-5 vertical
+0
+5
+5
+Connector_FFC-FPC
+TE_84982-6_2Rows-06Pins-P1.0mm_Vertical
+TE FPC connector, 06 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-6 vertical
+0
+6
+6
+Connector_FFC-FPC
+TE_84982-7_2Rows-07Pins-P1.0mm_Vertical
+TE FPC connector, 07 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-7 vertical
+0
+7
+7
+Connector_FFC-FPC
+TE_84982-8_2Rows-08Pins-P1.0mm_Vertical
+TE FPC connector, 08 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-8 vertical
+0
+8
+8
+Connector_FFC-FPC
+TE_84982-9_2Rows-09Pins-P1.0mm_Vertical
+TE FPC connector, 09 top-side contacts, 1.0mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84982&DocType=Customer+Drawing&DocLang=English&PartCntxt=84982-8&DocFormat=pdf
+84982-9 vertical
+0
+9
+9
+Connector_FFC-FPC
+Wuerth_68611214422_1x12-1MP_P1.0mm_Horizontal
+http://katalog.we-online.de/em/datasheet/68611214422.pdf
+Wuerth FPC 68611214422 connector 12 bottom-side contacts 1.0mm pitch 1.0mm height SMT
+0
+14
+13
+Connector_Harting
+Harting_har-flexicon_14110213001xxx_1x02-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110213001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+4
+3
+Connector_Harting
+Harting_har-flexicon_14110213002xxx_1x02-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110213002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+4
+3
+Connector_Harting
+Harting_har-flexicon_14110213010xxx_1x02-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110213010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+4
+3
+Connector_Harting
+Harting_har-flexicon_14110313001xxx_1x03-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110313001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+5
+4
+Connector_Harting
+Harting_har-flexicon_14110313002xxx_1x03-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110313002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+5
+4
+Connector_Harting
+Harting_har-flexicon_14110313010xxx_1x03-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110313010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+5
+4
+Connector_Harting
+Harting_har-flexicon_14110413001xxx_1x04-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110413001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+6
+5
+Connector_Harting
+Harting_har-flexicon_14110413002xxx_1x04-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110413002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+6
+5
+Connector_Harting
+Harting_har-flexicon_14110413010xxx_1x04-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110413010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+6
+5
+Connector_Harting
+Harting_har-flexicon_14110513001xxx_1x05-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110513001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+7
+6
+Connector_Harting
+Harting_har-flexicon_14110513002xxx_1x05-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110513002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+7
+6
+Connector_Harting
+Harting_har-flexicon_14110513010xxx_1x05-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110513010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+7
+6
+Connector_Harting
+Harting_har-flexicon_14110613001xxx_1x06-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110613001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+8
+7
+Connector_Harting
+Harting_har-flexicon_14110613002xxx_1x06-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110613002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+8
+7
+Connector_Harting
+Harting_har-flexicon_14110613010xxx_1x06-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110613010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+8
+7
+Connector_Harting
+Harting_har-flexicon_14110713001xxx_1x07-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110713001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+9
+8
+Connector_Harting
+Harting_har-flexicon_14110713002xxx_1x07-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110713002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+9
+8
+Connector_Harting
+Harting_har-flexicon_14110713010xxx_1x07-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110713010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+9
+8
+Connector_Harting
+Harting_har-flexicon_14110813001xxx_1x08-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110813001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+10
+9
+Connector_Harting
+Harting_har-flexicon_14110813002xxx_1x08-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110813002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+10
+9
+Connector_Harting
+Harting_har-flexicon_14110813010xxx_1x08-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110813010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+10
+9
+Connector_Harting
+Harting_har-flexicon_14110913001xxx_1x09-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14110913001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+11
+10
+Connector_Harting
+Harting_har-flexicon_14110913002xxx_1x09-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110913002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+11
+10
+Connector_Harting
+Harting_har-flexicon_14110913010xxx_1x09-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14110913010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+11
+10
+Connector_Harting
+Harting_har-flexicon_14111013001xxx_1x10-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14111013001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+12
+11
+Connector_Harting
+Harting_har-flexicon_14111013002xxx_1x10-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111013002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+12
+11
+Connector_Harting
+Harting_har-flexicon_14111013010xxx_1x10-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111013010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+12
+11
+Connector_Harting
+Harting_har-flexicon_14111113001xxx_1x11-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14111113001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+13
+12
+Connector_Harting
+Harting_har-flexicon_14111113002xxx_1x11-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111113002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+13
+12
+Connector_Harting
+Harting_har-flexicon_14111113010xxx_1x11-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111113010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+13
+12
+Connector_Harting
+Harting_har-flexicon_14111213001xxx_1x12-MP_P2.54mm_Vertical
+Harting har-flexicon series connector, 14111213001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon vertical
+0
+14
+13
+Connector_Harting
+Harting_har-flexicon_14111213002xxx_1x12-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111213002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+14
+13
+Connector_Harting
+Harting_har-flexicon_14111213010xxx_1x12-MP_P2.54mm_Horizontal
+Harting har-flexicon series connector, 14111213010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator
+connector Harting har-flexicon horizontal
+0
+14
+13
+Connector_Harwin
+Harwin_Gecko-G125-FVX0605L0X_2x03_P1.25mm_Vertical
+Harwin Gecko Connector, 6 pins, dual row female, vertical entry, PN:G125-FVX0605L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+6
+6
+Connector_Harwin
+Harwin_Gecko-G125-FVX1005L0X_2x05_P1.25mm_Vertical
+Harwin Gecko Connector, 10 pins, dual row female, vertical entry, PN:G125-FVX1005L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+10
+10
+Connector_Harwin
+Harwin_Gecko-G125-FVX1205L0X_2x06_P1.25mm_Vertical
+Harwin Gecko Connector, 12 pins, dual row female, vertical entry, PN:G125-FVX1205L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+12
+12
+Connector_Harwin
+Harwin_Gecko-G125-FVX1605L0X_2x08_P1.25mm_Vertical
+Harwin Gecko Connector, 16 pins, dual row female, vertical entry, PN:G125-FVX1605L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+16
+16
+Connector_Harwin
+Harwin_Gecko-G125-FVX2005L0X_2x10_P1.25mm_Vertical
+Harwin Gecko Connector, 20 pins, dual row female, vertical entry, PN:G125-FVX2005L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+20
+20
+Connector_Harwin
+Harwin_Gecko-G125-FVX2605L0X_2x13_P1.25mm_Vertical
+Harwin Gecko Connector, 26 pins, dual row female, vertical entry, PN:G125-FVX2605L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+26
+26
+Connector_Harwin
+Harwin_Gecko-G125-FVX3405L0X_2x17_P1.25mm_Vertical
+Harwin Gecko Connector, 34 pins, dual row female, vertical entry, PN:G125-FVX3405L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+34
+34
+Connector_Harwin
+Harwin_Gecko-G125-FVX5005L0X_2x25_P1.25mm_Vertical
+Harwin Gecko Connector, 50 pins, dual row female, vertical entry, PN:G125-FVX5005L0X, https://content.harwin.com/m/60a18b02a2a99a14/original/DRG-00168-Technical-Drawing-Datasheet-G125-FVXXX05L0P-pdf.pdf
+connector harwin gecko
+0
+50
+50
+Connector_Harwin
+Harwin_Gecko-G125-MVX0605L0X_2x03_P1.25mm_Vertical
+Harwin Gecko Connector, 6 pins, dual row male, vertical entry, no latches, PN:G125-MVX0605L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+6
+6
+Connector_Harwin
+Harwin_Gecko-G125-MVX0605L1X_2x03_P1.25mm_Vertical
+Harwin Gecko Connector, 6 pins, dual row male, vertical entry, with latches, PN:G125-MVX0605L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+6
+6
+Connector_Harwin
+Harwin_Gecko-G125-MVX1005L0X_2x05_P1.25mm_Vertical
+Harwin Gecko Connector, 10 pins, dual row male, vertical entry, no latches, PN:G125-MVX1005L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+10
+10
+Connector_Harwin
+Harwin_Gecko-G125-MVX1005L1X_2x05_P1.25mm_Vertical
+Harwin Gecko Connector, 10 pins, dual row male, vertical entry, with latches, PN:G125-MVX1005L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+10
+10
+Connector_Harwin
+Harwin_Gecko-G125-MVX1205L0X_2x06_P1.25mm_Vertical
+Harwin Gecko Connector, 12 pins, dual row male, vertical entry, no latches, PN:G125-MVX1205L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+12
+12
+Connector_Harwin
+Harwin_Gecko-G125-MVX1205L1X_2x06_P1.25mm_Vertical
+Harwin Gecko Connector, 12 pins, dual row male, vertical entry, with latches, PN:G125-MVX1205L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+12
+12
+Connector_Harwin
+Harwin_Gecko-G125-MVX1605L0X_2x08_P1.25mm_Vertical
+Harwin Gecko Connector, 16 pins, dual row male, vertical entry, no latches, PN:G125-MVX1605L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+16
+16
+Connector_Harwin
+Harwin_Gecko-G125-MVX1605L1X_2x08_P1.25mm_Vertical
+Harwin Gecko Connector, 16 pins, dual row male, vertical entry, with latches, PN:G125-MVX1605L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+16
+16
+Connector_Harwin
+Harwin_Gecko-G125-MVX2005L0X_2x10_P1.25mm_Vertical
+Harwin Gecko Connector, 20 pins, dual row male, vertical entry, no latches, PN:G125-MVX2005L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+20
+20
+Connector_Harwin
+Harwin_Gecko-G125-MVX2005L1X_2x10_P1.25mm_Vertical
+Harwin Gecko Connector, 20 pins, dual row male, vertical entry, with latches, PN:G125-MVX2005L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+20
+20
+Connector_Harwin
+Harwin_Gecko-G125-MVX2605L0X_2x13_P1.25mm_Vertical
+Harwin Gecko Connector, 26 pins, dual row male, vertical entry, no latches, PN:G125-MVX2605L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+26
+26
+Connector_Harwin
+Harwin_Gecko-G125-MVX2605L1X_2x13_P1.25mm_Vertical
+Harwin Gecko Connector, 26 pins, dual row male, vertical entry, with latches, PN:G125-MVX2605L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+26
+26
+Connector_Harwin
+Harwin_Gecko-G125-MVX3405L0X_2x17_P1.25mm_Vertical
+Harwin Gecko Connector, 34 pins, dual row male, vertical entry, no latches, PN:G125-MVX3405L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+34
+34
+Connector_Harwin
+Harwin_Gecko-G125-MVX3405L1X_2x17_P1.25mm_Vertical
+Harwin Gecko Connector, 34 pins, dual row male, vertical entry, with latches, PN:G125-MVX3405L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+34
+34
+Connector_Harwin
+Harwin_Gecko-G125-MVX5005L0X_2x25_P1.25mm_Vertical
+Harwin Gecko Connector, 50 pins, dual row male, vertical entry, no latches, PN:G125-MVX5005L0X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+50
+50
+Connector_Harwin
+Harwin_Gecko-G125-MVX5005L1X_2x25_P1.25mm_Vertical
+Harwin Gecko Connector, 50 pins, dual row male, vertical entry, with latches, PN:G125-MVX5005L1X, https://content.harwin.com/m/62fd8add13144f50/original/DRG-00182-Technical-Drawing-Datasheet-G125-MVXXX05LXP-pdf.pdf
+connector harwin gecko
+0
+50
+50
+Connector_Harwin
+Harwin_Gecko_G125-MS10605M2P_2x03_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS10605M2P, 3 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+8
+7
+Connector_Harwin
+Harwin_Gecko_G125-MS11005M2P_2x05_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS11005M2P, 5 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+12
+11
+Connector_Harwin
+Harwin_Gecko_G125-MS11205M2P_2x06_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS11205M2P, 6 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+14
+13
+Connector_Harwin
+Harwin_Gecko_G125-MS11605M2P_2x08_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS11605M2P, 8 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+18
+17
+Connector_Harwin
+Harwin_Gecko_G125-MS12005M2P_2x10_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS12005M2P, 10 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+22
+21
+Connector_Harwin
+Harwin_Gecko_G125-MS12605M2P_2x13_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS12605M2P, 13 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+28
+27
+Connector_Harwin
+Harwin_Gecko_G125-MS13405M2P_2x17_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS13405M2P, 17 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+36
+35
+Connector_Harwin
+Harwin_Gecko_G125-MS15005M2P_2x25_P1.25mm_Vertical
+Harwin Male Vertical Surface Mount Double Row 1.25mm (0.049 inch) Pitch PCB Connector, G125-MS15005M2P, 25 Pins per row (https://cdn.harwin.com/pdfs/G125-MS1XX05M2P.pdf), generated with kicad-footprint-generator
+connector Harwin Gecko vertical
+0
+52
+51
+Connector_Harwin
+Harwin_LTek-Male_02_P2.00mm_Vertical
+Harwin LTek Connector, 2 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+2
+2
+Connector_Harwin
+Harwin_LTek-Male_02_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 2 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+6
+2
+Connector_Harwin
+Harwin_LTek-Male_2x02_P2.00mm_Vertical
+Harwin LTek Connector, 4 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+4
+4
+Connector_Harwin
+Harwin_LTek-Male_2x02_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 4 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+8
+4
+Connector_Harwin
+Harwin_LTek-Male_2x03_P2.00mm_Vertical
+Harwin LTek Connector, 6 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+6
+6
+Connector_Harwin
+Harwin_LTek-Male_2x03_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 6 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+10
+6
+Connector_Harwin
+Harwin_LTek-Male_2x04_P2.00mm_Vertical
+Harwin LTek Connector, 8 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+8
+8
+Connector_Harwin
+Harwin_LTek-Male_2x04_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 8 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+12
+8
+Connector_Harwin
+Harwin_LTek-Male_2x05_P2.00mm_Vertical
+Harwin LTek Connector, 10 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+10
+10
+Connector_Harwin
+Harwin_LTek-Male_2x05_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 10 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+14
+10
+Connector_Harwin
+Harwin_LTek-Male_2x06_P2.00mm_Vertical
+Harwin LTek Connector, 12 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+12
+12
+Connector_Harwin
+Harwin_LTek-Male_2x06_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 12 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+16
+12
+Connector_Harwin
+Harwin_LTek-Male_2x07_P2.00mm_Vertical
+Harwin LTek Connector, 14 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+14
+14
+Connector_Harwin
+Harwin_LTek-Male_2x07_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 14 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+18
+14
+Connector_Harwin
+Harwin_LTek-Male_2x08_P2.00mm_Vertical
+Harwin LTek Connector, 16 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+16
+16
+Connector_Harwin
+Harwin_LTek-Male_2x08_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 16 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+20
+16
+Connector_Harwin
+Harwin_LTek-Male_2x09_P2.00mm_Vertical
+Harwin LTek Connector, 18 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+18
+18
+Connector_Harwin
+Harwin_LTek-Male_2x09_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 18 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+22
+18
+Connector_Harwin
+Harwin_LTek-Male_2x10_P2.00mm_Vertical
+Harwin LTek Connector, 20 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+20
+20
+Connector_Harwin
+Harwin_LTek-Male_2x10_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 20 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+24
+20
+Connector_Harwin
+Harwin_LTek-Male_2x13_P2.00mm_Vertical
+Harwin LTek Connector, 26 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+26
+26
+Connector_Harwin
+Harwin_LTek-Male_2x13_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 26 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+30
+26
+Connector_Harwin
+Harwin_LTek-Male_2x17_P2.00mm_Vertical
+Harwin LTek Connector, 34 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+34
+34
+Connector_Harwin
+Harwin_LTek-Male_2x17_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 34 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+38
+34
+Connector_Harwin
+Harwin_LTek-Male_2x22_P2.00mm_Vertical
+Harwin LTek Connector, 44 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+44
+44
+Connector_Harwin
+Harwin_LTek-Male_2x22_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 44 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+48
+44
+Connector_Harwin
+Harwin_LTek-Male_03_P2.00mm_Vertical
+Harwin LTek Connector, 3 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+3
+3
+Connector_Harwin
+Harwin_LTek-Male_03_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 3 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+7
+3
+Connector_Harwin
+Harwin_LTek-Male_04_P2.00mm_Vertical
+Harwin LTek Connector, 4 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+4
+4
+Connector_Harwin
+Harwin_LTek-Male_04_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 4 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+8
+4
+Connector_Harwin
+Harwin_LTek-Male_05_P2.00mm_Vertical
+Harwin LTek Connector, 5 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+5
+5
+Connector_Harwin
+Harwin_LTek-Male_05_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 5 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+9
+5
+Connector_Harwin
+Harwin_LTek-Male_06_P2.00mm_Vertical
+Harwin LTek Connector, 6 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+6
+6
+Connector_Harwin
+Harwin_LTek-Male_06_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 6 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+10
+6
+Connector_Harwin
+Harwin_LTek-Male_07_P2.00mm_Vertical
+Harwin LTek Connector, 7 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+7
+7
+Connector_Harwin
+Harwin_LTek-Male_07_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 7 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+11
+7
+Connector_Harwin
+Harwin_LTek-Male_17_P2.00mm_Vertical
+Harwin LTek Connector, 17 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+17
+17
+Connector_Harwin
+Harwin_LTek-Male_17_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 17 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+21
+17
+Connector_Harwin
+Harwin_LTek-Male_22_P2.00mm_Vertical
+Harwin LTek Connector, 22 pins, single row male, vertical entry
+connector harwin ltek M80
+0
+22
+22
+Connector_Harwin
+Harwin_LTek-Male_22_P2.00mm_Vertical_StrainRelief
+Harwin LTek Connector, 22 pins, single row male, vertical entry, strain relief clip
+connector harwin ltek M80
+0
+26
+22
+Connector_Harwin
+Harwin_M20-89003xx_1x03_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89003xx, 3 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+3
+3
+Connector_Harwin
+Harwin_M20-89004xx_1x04_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89004xx, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+4
+4
+Connector_Harwin
+Harwin_M20-89005xx_1x05_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89005xx, 5 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+5
+5
+Connector_Harwin
+Harwin_M20-89006xx_1x06_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89006xx, 6 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+6
+6
+Connector_Harwin
+Harwin_M20-89007xx_1x07_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89007xx, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+7
+7
+Connector_Harwin
+Harwin_M20-89008xx_1x08_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89008xx, 8 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+8
+8
+Connector_Harwin
+Harwin_M20-89009xx_1x09_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89009xx, 9 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+9
+9
+Connector_Harwin
+Harwin_M20-89010xx_1x10_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89010xx, 10 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+10
+10
+Connector_Harwin
+Harwin_M20-89011xx_1x11_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89011xx, 11 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+11
+11
+Connector_Harwin
+Harwin_M20-89012xx_1x12_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89012xx, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+12
+12
+Connector_Harwin
+Harwin_M20-89013xx_1x13_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89013xx, 13 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+13
+13
+Connector_Harwin
+Harwin_M20-89014xx_1x14_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89014xx, 14 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+14
+14
+Connector_Harwin
+Harwin_M20-89015xx_1x15_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89015xx, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+15
+15
+Connector_Harwin
+Harwin_M20-89016xx_1x16_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89016xx, 16 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+16
+16
+Connector_Harwin
+Harwin_M20-89017xx_1x17_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89017xx, 17 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+17
+17
+Connector_Harwin
+Harwin_M20-89018xx_1x18_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89018xx, 18 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+18
+18
+Connector_Harwin
+Harwin_M20-89019xx_1x19_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89019xx, 19 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+19
+19
+Connector_Harwin
+Harwin_M20-89020xx_1x20_P2.54mm_Horizontal
+Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89020xx, 20 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator
+connector Harwin M20-890 horizontal
+0
+20
+20
+Connector_Harwin
+Harwin_M20-7810245_2x02_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810245, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+4
+4
+Connector_Harwin
+Harwin_M20-7810345_2x03_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810345, 3 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+6
+6
+Connector_Harwin
+Harwin_M20-7810445_2x04_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810445, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+8
+8
+Connector_Harwin
+Harwin_M20-7810545_2x05_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810545, 5 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+10
+10
+Connector_Harwin
+Harwin_M20-7810645_2x06_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810645, 6 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+12
+12
+Connector_Harwin
+Harwin_M20-7810745_2x07_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810745, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+14
+14
+Connector_Harwin
+Harwin_M20-7810845_2x08_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810845, 8 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+16
+16
+Connector_Harwin
+Harwin_M20-7810945_2x09_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810945, 9 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+18
+18
+Connector_Harwin
+Harwin_M20-7811045_2x10_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811045, 10 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+20
+20
+Connector_Harwin
+Harwin_M20-7811245_2x12_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811245, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+24
+24
+Connector_Harwin
+Harwin_M20-7811545_2x15_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811545, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+30
+30
+Connector_Harwin
+Harwin_M20-7812045_2x20_P2.54mm_Vertical
+Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7812045, 20 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator
+connector Harwin M20 vertical
+0
+40
+40
+Connector_Hirose
+Hirose_BM23FR0.6-16DP-0.35V_2x08_1MP_Vertical
+Hirose BM23 series connector, BM23FR0.6-16DP-0.35V (https://www.hirose.com/fr/product/document?clcode=CL0480-0290-0-95&productname=BM23FR0.6-16DP-0.35V(895)&series=BM23FR&documenttype=2DDrawing&lang=fr&documentid=D164551_en)
+connector Hirose BM23 16pin header
+0
+20
+17
+Connector_Hirose
+Hirose_BM23FR0.6-16DS-0.35V_2x08_P0.35_1MP_Vertical
+Hirose BM23 series connector, BM23FR0.6-16DS-0.35V (https://www.hirose.com/fr/product/document?clcode=CL0480-0295-0-51&productname=BM23FR0.6-16DS-0.35V(51)&series=BM23FR&documenttype=2DDrawing&lang=fr&documentid=D162179_en)
+connector Hirose 16pin receptacle vertical
+0
+20
+17
+Connector_Hirose
+Hirose_BM24_BM24-40DP-2-0.35V_2x20_P0.35mm_PowerPin2_Vertical
+Hirose BM24 series connector, BM24-40DP/2-0.35V (https://www.hirose.com/product/en/download_file/key_name/BM24/category/Catalog/doc_file_id/47680/?file_category_id=4&item_id=50&is_series=1)
+connector Hirose  BM24 40pin header
+0
+44
+42
+Connector_Hirose
+Hirose_BM24_BM24-40DS-2-0.35V_2x20_P0.35mm_PowerPin2_Vertical
+Hirose BM24 series connector, BM24-40DS/2-0.35V (https://www.hirose.com/product/en/download_file/key_name/BM24/category/Catalog/doc_file_id/47680/?file_category_id=4&item_id=50&is_series=1)
+connector Hirose 40pin receptacle vertical
+0
+42
+42
+Connector_Hirose
+Hirose_DF3EA-02P-2H_1x02-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-02P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+4
+3
+Connector_Hirose
+Hirose_DF3EA-03P-2H_1x03-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-03P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+5
+4
+Connector_Hirose
+Hirose_DF3EA-04P-2H_1x04-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-04P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+6
+5
+Connector_Hirose
+Hirose_DF3EA-05P-2H_1x05-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-05P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+7
+6
+Connector_Hirose
+Hirose_DF3EA-06P-2H_1x06-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-06P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+8
+7
+Connector_Hirose
+Hirose_DF3EA-07P-2H_1x07-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-07P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+9
+8
+Connector_Hirose
+Hirose_DF3EA-08P-2H_1x08-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-08P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+10
+9
+Connector_Hirose
+Hirose_DF3EA-09P-2H_1x09-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-09P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+11
+10
+Connector_Hirose
+Hirose_DF3EA-10P-2H_1x10-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-10P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+12
+11
+Connector_Hirose
+Hirose_DF3EA-11P-2H_1x11-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-11P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+13
+12
+Connector_Hirose
+Hirose_DF3EA-12P-2H_1x12-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-12P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+14
+13
+Connector_Hirose
+Hirose_DF3EA-13P-2H_1x13-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-13P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+15
+14
+Connector_Hirose
+Hirose_DF3EA-14P-2H_1x14-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-14P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+16
+15
+Connector_Hirose
+Hirose_DF3EA-15P-2H_1x15-1MP_P2.00mm_Horizontal
+Hirose  series connector, DF3EA-15P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+17
+16
+Connector_Hirose
+Hirose_DF11-4DP-2DSA_2x02_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-4DP-2DSA, 2 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+4
+4
+Connector_Hirose
+Hirose_DF11-6DP-2DSA_2x03_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-6DP-2DSA, 3 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+6
+6
+Connector_Hirose
+Hirose_DF11-8DP-2DSA_2x04_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-8DP-2DSA, 4 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+8
+8
+Connector_Hirose
+Hirose_DF11-10DP-2DSA_2x05_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-10DP-2DSA, 5 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+10
+10
+Connector_Hirose
+Hirose_DF11-12DP-2DSA_2x06_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-12DP-2DSA, 6 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+12
+12
+Connector_Hirose
+Hirose_DF11-14DP-2DSA_2x07_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-14DP-2DSA, 7 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+14
+14
+Connector_Hirose
+Hirose_DF11-16DP-2DSA_2x08_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-16DP-2DSA, 8 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+16
+16
+Connector_Hirose
+Hirose_DF11-18DP-2DSA_2x09_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-18DP-2DSA, 9 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+18
+18
+Connector_Hirose
+Hirose_DF11-20DP-2DSA_2x10_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-20DP-2DSA, 10 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+20
+20
+Connector_Hirose
+Hirose_DF11-22DP-2DSA_2x11_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-22DP-2DSA, 11 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+22
+22
+Connector_Hirose
+Hirose_DF11-24DP-2DSA_2x12_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-24DP-2DSA, 12 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+24
+24
+Connector_Hirose
+Hirose_DF11-26DP-2DSA_2x13_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-26DP-2DSA, 13 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+26
+26
+Connector_Hirose
+Hirose_DF11-28DP-2DSA_2x14_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-28DP-2DSA, 14 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+28
+28
+Connector_Hirose
+Hirose_DF11-30DP-2DSA_2x15_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-30DP-2DSA, 15 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+30
+30
+Connector_Hirose
+Hirose_DF11-32DP-2DSA_2x16_P2.00mm_Vertical
+Hirose DF11 through hole, DF11-32DP-2DSA, 16 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator
+connector Hirose DF11 vertical
+0
+32
+32
+Connector_Hirose
+Hirose_DF12_DF12C3.0-10DS-0.5V_2x05_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-10DS-0.5V, 10 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+20
+10
+Connector_Hirose
+Hirose_DF12_DF12C3.0-14DS-0.5V_2x07_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-14DS-0.5V, 14 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+28
+14
+Connector_Hirose
+Hirose_DF12_DF12C3.0-20DS-0.5V_2x10_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-20DS-0.5V, 20 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+40
+20
+Connector_Hirose
+Hirose_DF12_DF12C3.0-30DS-0.5V_2x15_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-30DS-0.5V, 30 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+60
+30
+Connector_Hirose
+Hirose_DF12_DF12C3.0-32DS-0.5V_2x16_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-32DS-0.5V, 32 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+64
+32
+Connector_Hirose
+Hirose_DF12_DF12C3.0-36DS-0.5V_2x18_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-36DS-0.5V, 36 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+72
+36
+Connector_Hirose
+Hirose_DF12_DF12C3.0-40DS-0.5V_2x20_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-40DS-0.5V, 40 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+80
+40
+Connector_Hirose
+Hirose_DF12_DF12C3.0-50DS-0.5V_2x25_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-50DS-0.5V, 50 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+100
+50
+Connector_Hirose
+Hirose_DF12_DF12C3.0-60DS-0.5V_2x30_P0.50mm_Vertical
+Hirose DF12C SMD, DF12C3.0-60DS-0.5V, 60 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+120
+60
+Connector_Hirose
+Hirose_DF12_DF12E3.0-10DP-0.5V_2x05_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-10DP-0.5V, 10 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+20
+10
+Connector_Hirose
+Hirose_DF12_DF12E3.0-14DP-0.5V_2x07_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-14DP-0.5V, 14 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+28
+14
+Connector_Hirose
+Hirose_DF12_DF12E3.0-20DP-0.5V_2x10_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-20DP-0.5V, 20 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+40
+20
+Connector_Hirose
+Hirose_DF12_DF12E3.0-30DP-0.5V_2x15_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-30DP-0.5V, 30 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+60
+30
+Connector_Hirose
+Hirose_DF12_DF12E3.0-32DP-0.5V_2x16_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-32DP-0.5V, 32 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+64
+32
+Connector_Hirose
+Hirose_DF12_DF12E3.0-36DP-0.5V_2x18_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-36DP-0.5V, 36 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+72
+36
+Connector_Hirose
+Hirose_DF12_DF12E3.0-40DP-0.5V_2x20_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-40DP-0.5V, 40 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+80
+40
+Connector_Hirose
+Hirose_DF12_DF12E3.0-50DP-0.5V_2x25_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-50DP-0.5V, 50 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+100
+50
+Connector_Hirose
+Hirose_DF12_DF12E3.0-60DP-0.5V_2x30_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-60DP-0.5V, 60 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+120
+60
+Connector_Hirose
+Hirose_DF12_DF12E3.0-80DP-0.5V_2x40_P0.50mm_Vertical
+Hirose DF12E SMD, DF12E3.0-80DP-0.5V, 80 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator
+connector Hirose DF12 vertical
+0
+160
+80
+Connector_Hirose
+Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-02P-1.25DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+2
+2
+Connector_Hirose
+Hirose_DF13-02P-1.25DS_1x02_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-02P-1.25DS, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+2
+2
+Connector_Hirose
+Hirose_DF13-03P-1.25DSA_1x03_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-03P-1.25DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+3
+3
+Connector_Hirose
+Hirose_DF13-03P-1.25DS_1x03_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-03P-1.25DS, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+3
+3
+Connector_Hirose
+Hirose_DF13-04P-1.25DSA_1x04_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-04P-1.25DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+4
+4
+Connector_Hirose
+Hirose_DF13-04P-1.25DS_1x04_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-04P-1.25DS, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+4
+4
+Connector_Hirose
+Hirose_DF13-05P-1.25DSA_1x05_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-05P-1.25DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+5
+5
+Connector_Hirose
+Hirose_DF13-05P-1.25DS_1x05_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-05P-1.25DS, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+5
+5
+Connector_Hirose
+Hirose_DF13-06P-1.25DSA_1x06_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-06P-1.25DSA, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+6
+6
+Connector_Hirose
+Hirose_DF13-06P-1.25DS_1x06_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-06P-1.25DS, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+6
+6
+Connector_Hirose
+Hirose_DF13-07P-1.25DSA_1x07_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-07P-1.25DSA, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+7
+7
+Connector_Hirose
+Hirose_DF13-07P-1.25DS_1x07_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-07P-1.25DS, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+7
+7
+Connector_Hirose
+Hirose_DF13-08P-1.25DSA_1x08_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-08P-1.25DSA, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+8
+8
+Connector_Hirose
+Hirose_DF13-08P-1.25DS_1x08_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-08P-1.25DS, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+8
+8
+Connector_Hirose
+Hirose_DF13-09P-1.25DSA_1x09_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-09P-1.25DSA, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+9
+9
+Connector_Hirose
+Hirose_DF13-09P-1.25DS_1x09_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-09P-1.25DS, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+9
+9
+Connector_Hirose
+Hirose_DF13-10P-1.25DSA_1x10_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-10P-1.25DSA, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+10
+10
+Connector_Hirose
+Hirose_DF13-10P-1.25DS_1x10_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-10P-1.25DS, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+10
+10
+Connector_Hirose
+Hirose_DF13-11P-1.25DSA_1x11_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-11P-1.25DSA, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+11
+11
+Connector_Hirose
+Hirose_DF13-11P-1.25DS_1x11_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-11P-1.25DS, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+11
+11
+Connector_Hirose
+Hirose_DF13-12P-1.25DSA_1x12_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-12P-1.25DSA, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+12
+12
+Connector_Hirose
+Hirose_DF13-12P-1.25DS_1x12_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-12P-1.25DS, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+12
+12
+Connector_Hirose
+Hirose_DF13-13P-1.25DSA_1x13_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-13P-1.25DSA, 13 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+13
+13
+Connector_Hirose
+Hirose_DF13-14P-1.25DSA_1x14_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-14P-1.25DSA, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+14
+14
+Connector_Hirose
+Hirose_DF13-14P-1.25DS_1x14_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-14P-1.25DS, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+14
+14
+Connector_Hirose
+Hirose_DF13-15P-1.25DSA_1x15_P1.25mm_Vertical
+Hirose DF13 through hole, DF13-15P-1.25DSA, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator
+connector Hirose DF13 vertical
+0
+15
+15
+Connector_Hirose
+Hirose_DF13-15P-1.25DS_1x15_P1.25mm_Horizontal
+Hirose DF13 through hole, DF13-15P-1.25DS, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator
+connector Hirose DF13 horizontal
+0
+15
+15
+Connector_Hirose
+Hirose_DF13C_CL535-0402-2-51_1x02-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0402-2-51, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+4
+3
+Connector_Hirose
+Hirose_DF13C_CL535-0403-5-51_1x03-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0403-5-51, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+5
+4
+Connector_Hirose
+Hirose_DF13C_CL535-0404-8-51_1x04-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0404-8-51, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+6
+5
+Connector_Hirose
+Hirose_DF13C_CL535-0405-0-51_1x05-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0405-0-51, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+7
+6
+Connector_Hirose
+Hirose_DF13C_CL535-0406-3-51_1x06-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0406-3-51, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+8
+7
+Connector_Hirose
+Hirose_DF13C_CL535-0407-6-51_1x07-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0407-6-51, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+9
+8
+Connector_Hirose
+Hirose_DF13C_CL535-0408-9-51_1x08-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0408-9-51, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+10
+9
+Connector_Hirose
+Hirose_DF13C_CL535-0409-1-51_1x09-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0409-1-51, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+11
+10
+Connector_Hirose
+Hirose_DF13C_CL535-0410-4-51_1x10-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0410-4-51, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+12
+11
+Connector_Hirose
+Hirose_DF13C_CL535-0411-3-51_1x11-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0411-3-51, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+13
+12
+Connector_Hirose
+Hirose_DF13C_CL535-0412-6-51_1x12-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0412-6-51, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+14
+13
+Connector_Hirose
+Hirose_DF13C_CL535-0414-1-51_1x14-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0414-1-51, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+16
+15
+Connector_Hirose
+Hirose_DF13C_CL535-0415-4-51_1x15-1MP_P1.25mm_Vertical
+Hirose DF13C SMD, CL535-0415-4-51, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator
+connector Hirose DF13C vertical
+0
+17
+16
+Connector_Hirose
+Hirose_DF52-2S-0.8H_1x02-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-2S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+4
+3
+Connector_Hirose
+Hirose_DF52-3S-0.8H_1x03-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-3S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+5
+4
+Connector_Hirose
+Hirose_DF52-4S-0.8H_1x04-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-4S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+6
+5
+Connector_Hirose
+Hirose_DF52-5S-0.8H_1x05-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-5S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+7
+6
+Connector_Hirose
+Hirose_DF52-6S-0.8H_1x06-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-6S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+8
+7
+Connector_Hirose
+Hirose_DF52-7S-0.8H_1x07-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-7S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+9
+8
+Connector_Hirose
+Hirose_DF52-8S-0.8H_1x08-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-8S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+10
+9
+Connector_Hirose
+Hirose_DF52-9S-0.8H_1x09-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-9S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+11
+10
+Connector_Hirose
+Hirose_DF52-10S-0.8H_1x10-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-10S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+12
+11
+Connector_Hirose
+Hirose_DF52-11S-0.8H_1x11-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-11S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+13
+12
+Connector_Hirose
+Hirose_DF52-12S-0.8H_1x12-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-12S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+14
+13
+Connector_Hirose
+Hirose_DF52-14S-0.8H_1x14-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-14S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+16
+15
+Connector_Hirose
+Hirose_DF52-15S-0.8H_1x15-1MP_P0.80mm_Horizontal
+Hirose  series connector, DF52-15S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator
+connector Hirose  horizontal
+0
+17
+16
+Connector_Hirose
+Hirose_DF63-5P-3.96DSA_1x05_P3.96mm_Vertical
+Hirose DF63 through hole, DF63-5P-3.96DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+5
+5
+Connector_Hirose
+Hirose_DF63-6P-3.96DSA_1x06_P3.96mm_Vertical
+Hirose DF63 through hole, DF63-6P-3.96DSA, 6 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+6
+6
+Connector_Hirose
+Hirose_DF63M-1P-3.96DSA_1x01_P3.96mm_Vertical
+Hirose DF63 through hole, DF63M-1P-3.96DSA, 1 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+1
+1
+Connector_Hirose
+Hirose_DF63M-2P-3.96DSA_1x02_P3.96mm_Vertical
+Hirose DF63 through hole, DF63M-2P-3.96DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+2
+2
+Connector_Hirose
+Hirose_DF63M-3P-3.96DSA_1x03_P3.96mm_Vertical
+Hirose DF63 through hole, DF63M-3P-3.96DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+3
+3
+Connector_Hirose
+Hirose_DF63M-4P-3.96DSA_1x04_P3.96mm_Vertical
+Hirose DF63 through hole, DF63M-4P-3.96DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+4
+4
+Connector_Hirose
+Hirose_DF63R-1P-3.96DSA_1x01_P3.96mm_Vertical
+Hirose DF63 through hole, DF63R-1P-3.96DSA, 1 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+1
+1
+Connector_Hirose
+Hirose_DF63R-2P-3.96DSA_1x02_P3.96mm_Vertical
+Hirose DF63 through hole, DF63R-2P-3.96DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+2
+2
+Connector_Hirose
+Hirose_DF63R-3P-3.96DSA_1x03_P3.96mm_Vertical
+Hirose DF63 through hole, DF63R-3P-3.96DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+3
+3
+Connector_Hirose
+Hirose_DF63R-4P-3.96DSA_1x04_P3.96mm_Vertical
+Hirose DF63 through hole, DF63R-4P-3.96DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+4
+4
+Connector_Hirose
+Hirose_DF63R-5P-3.96DSA_1x05_P3.96mm_Vertical
+Hirose DF63 through hole, DF63R-5P-3.96DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator
+connector Hirose DF63 vertical
+0
+5
+5
+Connector_Hirose_FX8
+Hirose_FX8-60P-SV_2x30_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+60
+60
+Connector_Hirose_FX8
+Hirose_FX8-60S-SV_2x30_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+60
+60
+Connector_Hirose_FX8
+Hirose_FX8-80P-SV_2x40_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+80
+80
+Connector_Hirose_FX8
+Hirose_FX8-80S-SV_2x40_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+80
+80
+Connector_Hirose_FX8
+Hirose_FX8-90P-SV_2x45_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+90
+90
+Connector_Hirose_FX8
+Hirose_FX8-90S-SV_2x45_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+90
+90
+Connector_Hirose_FX8
+Hirose_FX8-100P-SV_2x50_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+100
+100
+Connector_Hirose_FX8
+Hirose_FX8-100S-SV_2x50_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+100
+100
+Connector_Hirose_FX8
+Hirose_FX8-120P-SV_2x60_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+120
+120
+Connector_Hirose_FX8
+Hirose_FX8-120S-SV_2x60_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+120
+120
+Connector_Hirose_FX8
+Hirose_FX8-140P-SV_2x70_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Header, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking header
+0
+140
+140
+Connector_Hirose_FX8
+Hirose_FX8-140S-SV_2x70_P0.6mm
+0.6mm Pitch, Stacking Height 3mm to 16mm, Receptacle, vertical (source: https://www.hirose.com/de/product/document?clcode=&productname=&series=FX8&documenttype=Catalog&lang=en&documentid=D31612_en)
+conn hirose board to board stacking receptacle
+0
+140
+140
+Connector_IDC
+IDC-Header_2x03_P2.54mm_Horizontal
+Through hole IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x03 2.54mm double row
+0
+6
+6
+Connector_IDC
+IDC-Header_2x03_P2.54mm_Vertical
+Through hole IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x03 2.54mm double row
+0
+6
+6
+Connector_IDC
+IDC-Header_2x03_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x03 2.54mm double row
+0
+6
+6
+Connector_IDC
+IDC-Header_2x04_P2.54mm_Horizontal
+Through hole IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x04 2.54mm double row
+0
+8
+8
+Connector_IDC
+IDC-Header_2x04_P2.54mm_Vertical
+Through hole IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x04 2.54mm double row
+0
+8
+8
+Connector_IDC
+IDC-Header_2x04_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x04 2.54mm double row
+0
+8
+8
+Connector_IDC
+IDC-Header_2x05-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+12
+11
+Connector_IDC
+IDC-Header_2x05-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+12
+11
+Connector_IDC
+IDC-Header_2x05-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+12
+11
+Connector_IDC
+IDC-Header_2x05-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x05 2.54mm double row
+0
+12
+11
+Connector_IDC
+IDC-Header_2x05-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+12
+11
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Horizontal
+Through hole IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Vertical
+Through hole IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x05_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x05 2.54mm double row
+0
+10
+10
+Connector_IDC
+IDC-Header_2x06-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+14
+13
+Connector_IDC
+IDC-Header_2x06-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+14
+13
+Connector_IDC
+IDC-Header_2x06-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+14
+13
+Connector_IDC
+IDC-Header_2x06-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x06 2.54mm double row
+0
+14
+13
+Connector_IDC
+IDC-Header_2x06-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+14
+13
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Horizontal
+Through hole IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Vertical
+Through hole IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x06_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x06 2.54mm double row
+0
+12
+12
+Connector_IDC
+IDC-Header_2x07-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+16
+15
+Connector_IDC
+IDC-Header_2x07-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+16
+15
+Connector_IDC
+IDC-Header_2x07-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+16
+15
+Connector_IDC
+IDC-Header_2x07-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x07 2.54mm double row
+0
+16
+15
+Connector_IDC
+IDC-Header_2x07-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+16
+15
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Horizontal
+Through hole IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Horizontal_Lock
+Connector IDC Locked, 10 contacts, compatible header: PANCON HE10 (Series 50, (https://www.reboul.fr/storage/00003af6.pdf)
+connector idc locked
+0
+16
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Vertical
+Through hole IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x07_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x07 2.54mm double row
+0
+14
+14
+Connector_IDC
+IDC-Header_2x08-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+18
+17
+Connector_IDC
+IDC-Header_2x08-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+18
+17
+Connector_IDC
+IDC-Header_2x08-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+18
+17
+Connector_IDC
+IDC-Header_2x08-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x08 2.54mm double row
+0
+18
+17
+Connector_IDC
+IDC-Header_2x08-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+18
+17
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Horizontal
+Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Vertical
+Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x08_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x08 2.54mm double row
+0
+16
+16
+Connector_IDC
+IDC-Header_2x09_P2.54mm_Horizontal
+Through hole IDC box header, 2x09, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x09 2.54mm double row
+0
+18
+18
+Connector_IDC
+IDC-Header_2x09_P2.54mm_Vertical
+Through hole IDC box header, 2x09, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x09 2.54mm double row
+0
+18
+18
+Connector_IDC
+IDC-Header_2x09_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x09, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x09 2.54mm double row
+0
+18
+18
+Connector_IDC
+IDC-Header_2x10-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+22
+21
+Connector_IDC
+IDC-Header_2x10-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+22
+21
+Connector_IDC
+IDC-Header_2x10-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+22
+21
+Connector_IDC
+IDC-Header_2x10-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x10 2.54mm double row
+0
+22
+21
+Connector_IDC
+IDC-Header_2x10-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+22
+21
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Horizontal
+Through hole IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Vertical
+Through hole IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x10_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x10 2.54mm double row
+0
+20
+20
+Connector_IDC
+IDC-Header_2x11_P2.54mm_Horizontal
+Through hole IDC box header, 2x11, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x11 2.54mm double row
+0
+22
+22
+Connector_IDC
+IDC-Header_2x11_P2.54mm_Vertical
+Through hole IDC box header, 2x11, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x11 2.54mm double row
+0
+22
+22
+Connector_IDC
+IDC-Header_2x11_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x11, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x11 2.54mm double row
+0
+22
+22
+Connector_IDC
+IDC-Header_2x12-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+26
+25
+Connector_IDC
+IDC-Header_2x12-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+26
+25
+Connector_IDC
+IDC-Header_2x12-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+26
+25
+Connector_IDC
+IDC-Header_2x12-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x12 2.54mm double row
+0
+26
+25
+Connector_IDC
+IDC-Header_2x12-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+26
+25
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Horizontal
+Through hole IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Vertical
+Through hole IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x12_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x12 2.54mm double row
+0
+24
+24
+Connector_IDC
+IDC-Header_2x13-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+28
+27
+Connector_IDC
+IDC-Header_2x13-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+28
+27
+Connector_IDC
+IDC-Header_2x13-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+28
+27
+Connector_IDC
+IDC-Header_2x13-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x13 2.54mm double row
+0
+28
+27
+Connector_IDC
+IDC-Header_2x13-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+28
+27
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Horizontal
+Through hole IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Vertical
+Through hole IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x13_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x13 2.54mm double row
+0
+26
+26
+Connector_IDC
+IDC-Header_2x15-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+32
+31
+Connector_IDC
+IDC-Header_2x15-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+32
+31
+Connector_IDC
+IDC-Header_2x15-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+32
+31
+Connector_IDC
+IDC-Header_2x15-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x15 2.54mm double row
+0
+32
+31
+Connector_IDC
+IDC-Header_2x15-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+32
+31
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Horizontal
+Through hole IDC box header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x15_P2.54mm_Vertical
+Through hole IDC box header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_IDC
+IDC-Header_2x17-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+36
+35
+Connector_IDC
+IDC-Header_2x17-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+36
+35
+Connector_IDC
+IDC-Header_2x17-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+36
+35
+Connector_IDC
+IDC-Header_2x17-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x17 2.54mm double row
+0
+36
+35
+Connector_IDC
+IDC-Header_2x17-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+36
+35
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Horizontal
+Through hole IDC box header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x17_P2.54mm_Vertical
+Through hole IDC box header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_IDC
+IDC-Header_2x20-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+42
+41
+Connector_IDC
+IDC-Header_2x20-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+42
+41
+Connector_IDC
+IDC-Header_2x20-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+42
+41
+Connector_IDC
+IDC-Header_2x20-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x20 2.54mm double row
+0
+42
+41
+Connector_IDC
+IDC-Header_2x20-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+42
+41
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Horizontal
+Through hole IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Vertical
+Through hole IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x20_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x20 2.54mm double row
+0
+40
+40
+Connector_IDC
+IDC-Header_2x22_P2.54mm_Horizontal
+Through hole IDC box header, 2x22, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x22 2.54mm double row
+0
+44
+44
+Connector_IDC
+IDC-Header_2x22_P2.54mm_Vertical
+Through hole IDC box header, 2x22, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x22 2.54mm double row
+0
+44
+44
+Connector_IDC
+IDC-Header_2x22_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x22, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x22 2.54mm double row
+0
+44
+44
+Connector_IDC
+IDC-Header_2x25-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+52
+51
+Connector_IDC
+IDC-Header_2x25-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+52
+51
+Connector_IDC
+IDC-Header_2x25-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+52
+51
+Connector_IDC
+IDC-Header_2x25-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x25 2.54mm double row
+0
+52
+51
+Connector_IDC
+IDC-Header_2x25-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+52
+51
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Horizontal
+Through hole IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Vertical
+Through hole IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x25_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x25 2.54mm double row
+0
+50
+50
+Connector_IDC
+IDC-Header_2x30-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+62
+61
+Connector_IDC
+IDC-Header_2x30-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+62
+61
+Connector_IDC
+IDC-Header_2x30-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+62
+61
+Connector_IDC
+IDC-Header_2x30-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x30 2.54mm double row
+0
+62
+61
+Connector_IDC
+IDC-Header_2x30-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+62
+61
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Horizontal
+Through hole IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Vertical
+Through hole IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x30_P2.54mm_Vertical_SMD
+SMD IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf
+SMD vertical IDC box header  2x30 2.54mm double row
+0
+60
+60
+Connector_IDC
+IDC-Header_2x32-1MP_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+66
+65
+Connector_IDC
+IDC-Header_2x32-1MP_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+66
+65
+Connector_IDC
+IDC-Header_2x32-1MP_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+66
+65
+Connector_IDC
+IDC-Header_2x32-1MP_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x32 2.54mm double row
+0
+66
+65
+Connector_IDC
+IDC-Header_2x32-1MP_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+66
+65
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Horizontal
+Through hole IDC box header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC box header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Latch6.5mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Latch9.5mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Latch12.0mm_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Latch_Horizontal
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole horizontal IDC header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Latch_Vertical
+Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_IDC
+IDC-Header_2x32_P2.54mm_Vertical
+Through hole IDC box header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0
+Through hole vertical IDC box header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_JAE
+JAE_LY20-4P-DLT1_2x02_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-4P-DLT1, 2 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+4
+4
+Connector_JAE
+JAE_LY20-4P-DT1_2x02_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-4P-DT1, 2 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+4
+4
+Connector_JAE
+JAE_LY20-6P-DLT1_2x03_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-6P-DLT1, 3 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+6
+6
+Connector_JAE
+JAE_LY20-6P-DT1_2x03_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-6P-DT1, 3 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+6
+6
+Connector_JAE
+JAE_LY20-8P-DLT1_2x04_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-8P-DLT1, 4 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+8
+8
+Connector_JAE
+JAE_LY20-8P-DT1_2x04_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-8P-DT1, 4 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+8
+8
+Connector_JAE
+JAE_LY20-10P-DLT1_2x05_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-10P-DLT1, 5 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+10
+10
+Connector_JAE
+JAE_LY20-10P-DT1_2x05_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-10P-DT1, 5 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+10
+10
+Connector_JAE
+JAE_LY20-12P-DLT1_2x06_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-12P-DLT1, 6 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+12
+12
+Connector_JAE
+JAE_LY20-12P-DT1_2x06_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-12P-DT1, 6 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+12
+12
+Connector_JAE
+JAE_LY20-14P-DLT1_2x07_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-14P-DLT1, 7 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+14
+14
+Connector_JAE
+JAE_LY20-14P-DT1_2x07_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-14P-DT1, 7 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+14
+14
+Connector_JAE
+JAE_LY20-16P-DLT1_2x08_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-16P-DLT1, 8 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+16
+16
+Connector_JAE
+JAE_LY20-16P-DT1_2x08_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-16P-DT1, 8 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+16
+16
+Connector_JAE
+JAE_LY20-18P-DLT1_2x09_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-18P-DLT1, 9 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+18
+18
+Connector_JAE
+JAE_LY20-18P-DT1_2x09_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-18P-DT1, 9 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+18
+18
+Connector_JAE
+JAE_LY20-20P-DLT1_2x10_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-20P-DLT1, 10 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+20
+20
+Connector_JAE
+JAE_LY20-20P-DT1_2x10_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-20P-DT1, 10 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+20
+20
+Connector_JAE
+JAE_LY20-22P-DLT1_2x11_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-22P-DLT1, 11 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+22
+22
+Connector_JAE
+JAE_LY20-22P-DT1_2x11_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-22P-DT1, 11 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+22
+22
+Connector_JAE
+JAE_LY20-24P-DLT1_2x12_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-24P-DLT1, 12 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+24
+24
+Connector_JAE
+JAE_LY20-24P-DT1_2x12_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-24P-DT1, 12 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+24
+24
+Connector_JAE
+JAE_LY20-26P-DLT1_2x13_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-26P-DLT1, 13 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+26
+26
+Connector_JAE
+JAE_LY20-26P-DT1_2x13_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-26P-DT1, 13 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+26
+26
+Connector_JAE
+JAE_LY20-28P-DLT1_2x14_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-28P-DLT1, 14 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+28
+28
+Connector_JAE
+JAE_LY20-28P-DT1_2x14_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-28P-DT1, 14 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+28
+28
+Connector_JAE
+JAE_LY20-30P-DLT1_2x15_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-30P-DLT1, 15 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+30
+30
+Connector_JAE
+JAE_LY20-30P-DT1_2x15_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-30P-DT1, 15 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+30
+30
+Connector_JAE
+JAE_LY20-32P-DLT1_2x16_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-32P-DLT1, 16 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+32
+32
+Connector_JAE
+JAE_LY20-32P-DT1_2x16_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-32P-DT1, 16 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+32
+32
+Connector_JAE
+JAE_LY20-34P-DLT1_2x17_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-34P-DLT1, 17 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+34
+34
+Connector_JAE
+JAE_LY20-34P-DT1_2x17_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-34P-DT1, 17 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+34
+34
+Connector_JAE
+JAE_LY20-36P-DLT1_2x18_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-36P-DLT1, 18 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+36
+36
+Connector_JAE
+JAE_LY20-36P-DT1_2x18_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-36P-DT1, 18 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+36
+36
+Connector_JAE
+JAE_LY20-38P-DLT1_2x19_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-38P-DLT1, 19 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+38
+38
+Connector_JAE
+JAE_LY20-38P-DT1_2x19_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-38P-DT1, 19 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+38
+38
+Connector_JAE
+JAE_LY20-40P-DLT1_2x20_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-40P-DLT1, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+40
+40
+Connector_JAE
+JAE_LY20-40P-DT1_2x20_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-40P-DT1, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+40
+40
+Connector_JAE
+JAE_LY20-42P-DLT1_2x21_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-42P-DLT1, 21 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+42
+42
+Connector_JAE
+JAE_LY20-42P-DT1_2x21_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-42P-DT1, 21 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+42
+42
+Connector_JAE
+JAE_LY20-44P-DLT1_2x22_P2.00mm_Horizontal
+Molex LY 20 series connector, LY20-44P-DLT1, 22 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator
+connector JAE  horizontal
+0
+44
+44
+Connector_JAE
+JAE_LY20-44P-DT1_2x22_P2.00mm_Vertical
+Molex LY 20 series connector, LY20-44P-DT1, 22 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator
+connector JAE  vertical
+0
+44
+44
+Connector_JAE
+JAE_MM70-314-310B1
+http://www.heilind.com/marketing/documents/jae/JAE_MM70.pdf
+connector JAE MXM
+0
+280
+279
+Connector_JAE
+JAE_SIM_Card_SF72S006
+SIM Card, Push-Push, https://www.jae.com/direct/topics/topics_file_download/topics_id=68892&ext_no=06&index=0&_lang=en&v=202003111511468456809
+SIM Card with Detect Switch
+0
+18
+9
+Connector_JAE_WP7B
+JAE_WP7B-P034VA1-R8000_2x17-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+38
+35
+Connector_JAE_WP7B
+JAE_WP7B-P034VA1-R8000_Longpads_2x17-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+38
+35
+Connector_JAE_WP7B
+JAE_WP7B-P040VA1-R8000_2x20-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+44
+41
+Connector_JAE_WP7B
+JAE_WP7B-P040VA1-R8000_Longpads_2x20-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+44
+41
+Connector_JAE_WP7B
+JAE_WP7B-P050VA1-R8000_2x25-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+54
+51
+Connector_JAE_WP7B
+JAE_WP7B-P050VA1-R8000_Longpads_2x25-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+54
+51
+Connector_JAE_WP7B
+JAE_WP7B-P060VA1-R8000_2x30-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+64
+61
+Connector_JAE_WP7B
+JAE_WP7B-P060VA1-R8000_Longpads_2x30-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+64
+61
+Connector_JAE_WP7B
+JAE_WP7B-P070VA1-R8000_2x35-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+74
+71
+Connector_JAE_WP7B
+JAE_WP7B-P070VA1-R8000_Longpads_2x35-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Plug, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66869&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+74
+71
+Connector_JAE_WP7B
+JAE_WP7B-S034VA1-R8000_2x17-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+38
+35
+Connector_JAE_WP7B
+JAE_WP7B-S034VA1-R8000_Longpads_2x17-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+38
+35
+Connector_JAE_WP7B
+JAE_WP7B-S040VA1-R8000_2x20-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+44
+41
+Connector_JAE_WP7B
+JAE_WP7B-S040VA1-R8000_Longpads_2x20-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+44
+41
+Connector_JAE_WP7B
+JAE_WP7B-S050VA1-R8000_2x25-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+54
+51
+Connector_JAE_WP7B
+JAE_WP7B-S050VA1-R8000_Longpads_2x25-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+54
+51
+Connector_JAE_WP7B
+JAE_WP7B-S060VA1-R8000_2x30-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+64
+61
+Connector_JAE_WP7B
+JAE_WP7B-S060VA1-R8000_Longpads_2x30-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+64
+61
+Connector_JAE_WP7B
+JAE_WP7B-S070VA1-R8000_2x35-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+74
+71
+Connector_JAE_WP7B
+JAE_WP7B-S070VA1-R8000_Longpads_2x35-1MP_P0.4mm
+0.4mm Pitch, Stacking Type, Board-to-Board FPC connector, 0.7mm Mating Height, Reworkable, Receptacle, vertical (source: https://www.jae.com/direct/topics/topics_file_download/topics_id=66874&ext_no=06&index=0&_lang=en&v=)
+conn jae fpc board to board
+0
+74
+71
+Connector_JST
+JST_ACH_BM01B-ACHSS-A-GAN-ETF_1x01-1MP_P1.20mm_Vertical
+JST ACH series connector, BM01B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator
+connector JST ACH vertical
+0
+3
+2
+Connector_JST
+JST_ACH_BM02B-ACHSS-GAN-ETF_1x02-1MP_P1.20mm_Vertical
+JST ACH series connector, BM02B-ACHSS-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator
+connector JST ACH vertical
+0
+4
+3
+Connector_JST
+JST_ACH_BM03B-ACHSS-GAN-ETF_1x03-1MP_P1.20mm_Vertical
+JST ACH series connector, BM03B-ACHSS-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator
+connector JST ACH vertical
+0
+5
+4
+Connector_JST
+JST_ACH_BM04B-ACHSS-A-GAN-ETF_1x04-1MP_P1.20mm_Vertical
+JST ACH series connector, BM04B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator
+connector JST ACH vertical
+0
+6
+5
+Connector_JST
+JST_ACH_BM05B-ACHSS-A-GAN-ETF_1x05-1MP_P1.20mm_Vertical
+JST ACH series connector, BM05B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator
+connector JST ACH vertical
+0
+7
+6
+Connector_JST
+JST_AUH_BM03B-AUHKS-GA-TB_1x03-1MP_P1.50mm_Vertical
+JST AUH series connector, BM03B-AUHKS-GA-TB (http://www.jst-mfg.com/product/pdf/eng/eAUH.pdf), generated with kicad-footprint-generator
+connector JST AUH vertical
+0
+5
+4
+Connector_JST
+JST_AUH_BM05B-AUHKS-GA-TB_1x05-1MP_P1.50mm_Vertical
+JST AUH series connector, BM05B-AUHKS-GA-TB (http://www.jst-mfg.com/product/pdf/eng/eAUH.pdf), generated with kicad-footprint-generator
+connector JST AUH vertical
+0
+7
+6
+Connector_JST
+JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical
+JST EH series connector, B2B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+2
+2
+Connector_JST
+JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical
+JST EH series connector, B3B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+3
+3
+Connector_JST
+JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical
+JST EH series connector, B4B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+4
+4
+Connector_JST
+JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical
+JST EH series connector, B5B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+5
+5
+Connector_JST
+JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical
+JST EH series connector, B6B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+6
+6
+Connector_JST
+JST_EH_B7B-EH-A_1x07_P2.50mm_Vertical
+JST EH series connector, B7B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+7
+7
+Connector_JST
+JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical
+JST EH series connector, B8B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+8
+8
+Connector_JST
+JST_EH_B9B-EH-A_1x09_P2.50mm_Vertical
+JST EH series connector, B9B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+9
+9
+Connector_JST
+JST_EH_B10B-EH-A_1x10_P2.50mm_Vertical
+JST EH series connector, B10B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+10
+10
+Connector_JST
+JST_EH_B11B-EH-A_1x11_P2.50mm_Vertical
+JST EH series connector, B11B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+11
+11
+Connector_JST
+JST_EH_B12B-EH-A_1x12_P2.50mm_Vertical
+JST EH series connector, B12B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+12
+12
+Connector_JST
+JST_EH_B13B-EH-A_1x13_P2.50mm_Vertical
+JST EH series connector, B13B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+13
+13
+Connector_JST
+JST_EH_B14B-EH-A_1x14_P2.50mm_Vertical
+JST EH series connector, B14B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+14
+14
+Connector_JST
+JST_EH_B15B-EH-A_1x15_P2.50mm_Vertical
+JST EH series connector, B15B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH vertical
+0
+15
+15
+Connector_JST
+JST_EH_S2B-EH_1x02_P2.50mm_Horizontal
+JST EH series connector, S2B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+2
+2
+Connector_JST
+JST_EH_S3B-EH_1x03_P2.50mm_Horizontal
+JST EH series connector, S3B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+3
+3
+Connector_JST
+JST_EH_S4B-EH_1x04_P2.50mm_Horizontal
+JST EH series connector, S4B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+4
+4
+Connector_JST
+JST_EH_S5B-EH_1x05_P2.50mm_Horizontal
+JST EH series connector, S5B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+5
+5
+Connector_JST
+JST_EH_S6B-EH_1x06_P2.50mm_Horizontal
+JST EH series connector, S6B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+6
+6
+Connector_JST
+JST_EH_S7B-EH_1x07_P2.50mm_Horizontal
+JST EH series connector, S7B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+7
+7
+Connector_JST
+JST_EH_S8B-EH_1x08_P2.50mm_Horizontal
+JST EH series connector, S8B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+8
+8
+Connector_JST
+JST_EH_S9B-EH_1x09_P2.50mm_Horizontal
+JST EH series connector, S9B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+9
+9
+Connector_JST
+JST_EH_S10B-EH_1x10_P2.50mm_Horizontal
+JST EH series connector, S10B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+10
+10
+Connector_JST
+JST_EH_S11B-EH_1x11_P2.50mm_Horizontal
+JST EH series connector, S11B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+11
+11
+Connector_JST
+JST_EH_S12B-EH_1x12_P2.50mm_Horizontal
+JST EH series connector, S12B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+12
+12
+Connector_JST
+JST_EH_S13B-EH_1x13_P2.50mm_Horizontal
+JST EH series connector, S13B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+13
+13
+Connector_JST
+JST_EH_S14B-EH_1x14_P2.50mm_Horizontal
+JST EH series connector, S14B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+14
+14
+Connector_JST
+JST_EH_S15B-EH_1x15_P2.50mm_Horizontal
+JST EH series connector, S15B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator
+connector JST EH horizontal
+0
+15
+15
+Connector_JST
+JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical
+JST GH series connector, BM02B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+4
+3
+Connector_JST
+JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical
+JST GH series connector, BM03B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+5
+4
+Connector_JST
+JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical
+JST GH series connector, BM04B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+6
+5
+Connector_JST
+JST_GH_BM05B-GHS-TBT_1x05-1MP_P1.25mm_Vertical
+JST GH series connector, BM05B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+7
+6
+Connector_JST
+JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical
+JST GH series connector, BM06B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+8
+7
+Connector_JST
+JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical
+JST GH series connector, BM07B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+9
+8
+Connector_JST
+JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical
+JST GH series connector, BM08B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+10
+9
+Connector_JST
+JST_GH_BM09B-GHS-TBT_1x09-1MP_P1.25mm_Vertical
+JST GH series connector, BM09B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+11
+10
+Connector_JST
+JST_GH_BM10B-GHS-TBT_1x10-1MP_P1.25mm_Vertical
+JST GH series connector, BM10B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+12
+11
+Connector_JST
+JST_GH_BM11B-GHS-TBT_1x11-1MP_P1.25mm_Vertical
+JST GH series connector, BM11B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+13
+12
+Connector_JST
+JST_GH_BM12B-GHS-TBT_1x12-1MP_P1.25mm_Vertical
+JST GH series connector, BM12B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+14
+13
+Connector_JST
+JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical
+JST GH series connector, BM13B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+15
+14
+Connector_JST
+JST_GH_BM14B-GHS-TBT_1x14-1MP_P1.25mm_Vertical
+JST GH series connector, BM14B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+16
+15
+Connector_JST
+JST_GH_BM15B-GHS-TBT_1x15-1MP_P1.25mm_Vertical
+JST GH series connector, BM15B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH vertical
+0
+17
+16
+Connector_JST
+JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal
+JST GH series connector, SM02B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+4
+3
+Connector_JST
+JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal
+JST GH series connector, SM03B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+5
+4
+Connector_JST
+JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal
+JST GH series connector, SM04B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+6
+5
+Connector_JST
+JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal
+JST GH series connector, SM05B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+7
+6
+Connector_JST
+JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal
+JST GH series connector, SM06B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+8
+7
+Connector_JST
+JST_GH_SM07B-GHS-TB_1x07-1MP_P1.25mm_Horizontal
+JST GH series connector, SM07B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+9
+8
+Connector_JST
+JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal
+JST GH series connector, SM08B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+10
+9
+Connector_JST
+JST_GH_SM09B-GHS-TB_1x09-1MP_P1.25mm_Horizontal
+JST GH series connector, SM09B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+11
+10
+Connector_JST
+JST_GH_SM10B-GHS-TB_1x10-1MP_P1.25mm_Horizontal
+JST GH series connector, SM10B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+12
+11
+Connector_JST
+JST_GH_SM11B-GHS-TB_1x11-1MP_P1.25mm_Horizontal
+JST GH series connector, SM11B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+13
+12
+Connector_JST
+JST_GH_SM12B-GHS-TB_1x12-1MP_P1.25mm_Horizontal
+JST GH series connector, SM12B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+14
+13
+Connector_JST
+JST_GH_SM13B-GHS-TB_1x13-1MP_P1.25mm_Horizontal
+JST GH series connector, SM13B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+15
+14
+Connector_JST
+JST_GH_SM14B-GHS-TB_1x14-1MP_P1.25mm_Horizontal
+JST GH series connector, SM14B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+16
+15
+Connector_JST
+JST_GH_SM15B-GHS-TB_1x15-1MP_P1.25mm_Horizontal
+JST GH series connector, SM15B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator
+connector JST GH horizontal
+0
+17
+16
+Connector_JST
+JST_J2100_B06B-J21DK-GGXR_2x03_P2.50x4.00mm_Vertical
+JST J2100 series connector, B06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+8
+6
+Connector_JST
+JST_J2100_B08B-J21DK-GGXR_2x04_P2.50x4.00mm_Vertical
+JST J2100 series connector, B08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+10
+8
+Connector_JST
+JST_J2100_B10B-J21DK-GGXR_2x05_P2.50x4.00mm_Vertical
+JST J2100 series connector, B10B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+12
+10
+Connector_JST
+JST_J2100_B12B-J21DK-GGXR_2x06_P2.50x4.00mm_Vertical
+JST J2100 series connector, B12B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+14
+12
+Connector_JST
+JST_J2100_B16B-J21DK-GGXR_2x08_P2.50x4.00mm_Vertical
+JST J2100 series connector, B16B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+18
+16
+Connector_JST
+JST_J2100_B20B-J21DK-GGXR_2x10_P2.50x4.00mm_Vertical
+JST J2100 series connector, B20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 vertical
+0
+22
+20
+Connector_JST
+JST_J2100_S06B-J21DK-GGXR_2x03_P2.50mm_Horizontal
+JST J2100 series connector, S06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+7
+6
+Connector_JST
+JST_J2100_S08B-J21DK-GGXR_2x04_P2.50mm_Horizontal
+JST J2100 series connector, S08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+10
+8
+Connector_JST
+JST_J2100_S10B-J21DK-GGXR_2x05_P2.50mm_Horizontal
+JST J2100 series connector, S10B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+12
+10
+Connector_JST
+JST_J2100_S12B-J21DK-GGXR_2x06_P2.50mm_Horizontal
+JST J2100 series connector, S12B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+14
+12
+Connector_JST
+JST_J2100_S16B-J21DK-GGXR_2x08_P2.50mm_Horizontal
+JST J2100 series connector, S16B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+18
+16
+Connector_JST
+JST_J2100_S20B-J21DK-GGXR_2x10_P2.50mm_Horizontal
+JST J2100 series connector, S20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator
+connector JST J2100 horizontal
+0
+22
+20
+Connector_JST
+JST_JWPF_B02B-JWPF-SK-R_1x02_P2.00mm_Vertical
+JST JWPF series connector, B02B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator
+connector JST JWPF vertical
+0
+2
+2
+Connector_JST
+JST_JWPF_B03B-JWPF-SK-R_1x03_P2.00mm_Vertical
+JST JWPF series connector, B03B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator
+connector JST JWPF vertical
+0
+3
+3
+Connector_JST
+JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical
+JST JWPF series connector, B04B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator
+connector JST JWPF vertical
+0
+4
+4
+Connector_JST
+JST_JWPF_B06B-JWPF-SK-R_2x03_P2.00mm_Vertical
+JST JWPF series connector, B06B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator
+connector JST JWPF vertical
+0
+6
+6
+Connector_JST
+JST_JWPF_B08B-JWPF-SK-R_2x04_P2.00mm_Vertical
+JST JWPF series connector, B08B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator
+connector JST JWPF vertical
+0
+8
+8
+Connector_JST
+JST_LEA_SM02B-LEASS-TF_1x02-1MP_P4.20mm_Horizontal
+JST LEA series connector, SM02B-LEASS-TF (http://www.jst-mfg.com/product/pdf/eng/eLEA.pdf), generated with kicad-footprint-generator
+connector JST LEA horizontal
+0
+4
+3
+Connector_JST
+JST_NV_B02P-NV_1x02_P5.00mm_Vertical
+JST NV series connector, B02P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator
+connector JST NV vertical
+0
+2
+2
+Connector_JST
+JST_NV_B03P-NV_1x03_P5.00mm_Vertical
+JST NV series connector, B03P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator
+connector JST NV vertical
+0
+3
+3
+Connector_JST
+JST_NV_B04P-NV_1x04_P5.00mm_Vertical
+JST NV series connector, B04P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator
+connector JST NV vertical
+0
+4
+4
+Connector_JST
+JST_PHD_B8B-PHDSS_2x04_P2.00mm_Vertical
+JST PHD series connector, B8B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+8
+8
+Connector_JST
+JST_PHD_B10B-PHDSS_2x05_P2.00mm_Vertical
+JST PHD series connector, B10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+10
+10
+Connector_JST
+JST_PHD_B12B-PHDSS_2x06_P2.00mm_Vertical
+JST PHD series connector, B12B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+12
+12
+Connector_JST
+JST_PHD_B14B-PHDSS_2x07_P2.00mm_Vertical
+JST PHD series connector, B14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+14
+14
+Connector_JST
+JST_PHD_B16B-PHDSS_2x08_P2.00mm_Vertical
+JST PHD series connector, B16B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+16
+16
+Connector_JST
+JST_PHD_B18B-PHDSS_2x09_P2.00mm_Vertical
+JST PHD series connector, B18B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+18
+18
+Connector_JST
+JST_PHD_B20B-PHDSS_2x10_P2.00mm_Vertical
+JST PHD series connector, B20B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+20
+20
+Connector_JST
+JST_PHD_B22B-PHDSS_2x11_P2.00mm_Vertical
+JST PHD series connector, B22B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+22
+22
+Connector_JST
+JST_PHD_B24B-PHDSS_2x12_P2.00mm_Vertical
+JST PHD series connector, B24B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+24
+24
+Connector_JST
+JST_PHD_B26B-PHDSS_2x13_P2.00mm_Vertical
+JST PHD series connector, B26B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+26
+26
+Connector_JST
+JST_PHD_B28B-PHDSS_2x14_P2.00mm_Vertical
+JST PHD series connector, B28B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+28
+28
+Connector_JST
+JST_PHD_B30B-PHDSS_2x15_P2.00mm_Vertical
+JST PHD series connector, B30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+30
+30
+Connector_JST
+JST_PHD_B32B-PHDSS_2x16_P2.00mm_Vertical
+JST PHD series connector, B32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+32
+32
+Connector_JST
+JST_PHD_B34B-PHDSS_2x17_P2.00mm_Vertical
+JST PHD series connector, B34B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD vertical
+0
+34
+34
+Connector_JST
+JST_PHD_S8B-PHDSS_2x04_P2.00mm_Horizontal
+JST PHD series connector, S8B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+8
+8
+Connector_JST
+JST_PHD_S10B-PHDSS_2x05_P2.00mm_Horizontal
+JST PHD series connector, S10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+10
+10
+Connector_JST
+JST_PHD_S12B-PHDSS_2x06_P2.00mm_Horizontal
+JST PHD series connector, S12B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+12
+12
+Connector_JST
+JST_PHD_S14B-PHDSS_2x07_P2.00mm_Horizontal
+JST PHD series connector, S14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+14
+14
+Connector_JST
+JST_PHD_S16B-PHDSS_2x08_P2.00mm_Horizontal
+JST PHD series connector, S16B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+16
+16
+Connector_JST
+JST_PHD_S18B-PHDSS_2x09_P2.00mm_Horizontal
+JST PHD series connector, S18B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+18
+18
+Connector_JST
+JST_PHD_S20B-PHDSS_2x10_P2.00mm_Horizontal
+JST PHD series connector, S20B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+20
+20
+Connector_JST
+JST_PHD_S22B-PHDSS_2x11_P2.00mm_Horizontal
+JST PHD series connector, S22B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+22
+22
+Connector_JST
+JST_PHD_S24B-PHDSS_2x12_P2.00mm_Horizontal
+JST PHD series connector, S24B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+24
+24
+Connector_JST
+JST_PHD_S26B-PHDSS_2x13_P2.00mm_Horizontal
+JST PHD series connector, S26B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+26
+26
+Connector_JST
+JST_PHD_S28B-PHDSS_2x14_P2.00mm_Horizontal
+JST PHD series connector, S28B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+28
+28
+Connector_JST
+JST_PHD_S30B-PHDSS_2x15_P2.00mm_Horizontal
+JST PHD series connector, S30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+30
+30
+Connector_JST
+JST_PHD_S32B-PHDSS_2x16_P2.00mm_Horizontal
+JST PHD series connector, S32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+32
+32
+Connector_JST
+JST_PHD_S34B-PHDSS_2x17_P2.00mm_Horizontal
+JST PHD series connector, S34B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator
+connector JST PHD horizontal
+0
+34
+34
+Connector_JST
+JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical
+JST PH series connector, B2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+2
+2
+Connector_JST
+JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical
+JST PH series connector, B2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+4
+3
+Connector_JST
+JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical
+JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+3
+3
+Connector_JST
+JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical
+JST PH series connector, B3B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+5
+4
+Connector_JST
+JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical
+JST PH series connector, B4B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+4
+4
+Connector_JST
+JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical
+JST PH series connector, B4B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+6
+5
+Connector_JST
+JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical
+JST PH series connector, B5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+5
+5
+Connector_JST
+JST_PH_B5B-PH-SM4-TB_1x05-1MP_P2.00mm_Vertical
+JST PH series connector, B5B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+7
+6
+Connector_JST
+JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical
+JST PH series connector, B6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+6
+6
+Connector_JST
+JST_PH_B6B-PH-SM4-TB_1x06-1MP_P2.00mm_Vertical
+JST PH series connector, B6B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+8
+7
+Connector_JST
+JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical
+JST PH series connector, B7B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+7
+7
+Connector_JST
+JST_PH_B7B-PH-SM4-TB_1x07-1MP_P2.00mm_Vertical
+JST PH series connector, B7B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+9
+8
+Connector_JST
+JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical
+JST PH series connector, B8B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+8
+8
+Connector_JST
+JST_PH_B8B-PH-SM4-TB_1x08-1MP_P2.00mm_Vertical
+JST PH series connector, B8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+10
+9
+Connector_JST
+JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical
+JST PH series connector, B9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+9
+9
+Connector_JST
+JST_PH_B9B-PH-SM4-TB_1x09-1MP_P2.00mm_Vertical
+JST PH series connector, B9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+11
+10
+Connector_JST
+JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical
+JST PH series connector, B10B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+10
+10
+Connector_JST
+JST_PH_B10B-PH-SM4-TB_1x10-1MP_P2.00mm_Vertical
+JST PH series connector, B10B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+12
+11
+Connector_JST
+JST_PH_B11B-PH-K_1x11_P2.00mm_Vertical
+JST PH series connector, B11B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+11
+11
+Connector_JST
+JST_PH_B11B-PH-SM4-TB_1x11-1MP_P2.00mm_Vertical
+JST PH series connector, B11B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+13
+12
+Connector_JST
+JST_PH_B12B-PH-K_1x12_P2.00mm_Vertical
+JST PH series connector, B12B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+12
+12
+Connector_JST
+JST_PH_B12B-PH-SM4-TB_1x12-1MP_P2.00mm_Vertical
+JST PH series connector, B12B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+14
+13
+Connector_JST
+JST_PH_B13B-PH-K_1x13_P2.00mm_Vertical
+JST PH series connector, B13B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+13
+13
+Connector_JST
+JST_PH_B13B-PH-SM4-TB_1x13-1MP_P2.00mm_Vertical
+JST PH series connector, B13B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+15
+14
+Connector_JST
+JST_PH_B14B-PH-K_1x14_P2.00mm_Vertical
+JST PH series connector, B14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+14
+14
+Connector_JST
+JST_PH_B14B-PH-SM4-TB_1x14-1MP_P2.00mm_Vertical
+JST PH series connector, B14B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+16
+15
+Connector_JST
+JST_PH_B15B-PH-K_1x15_P2.00mm_Vertical
+JST PH series connector, B15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+15
+15
+Connector_JST
+JST_PH_B15B-PH-SM4-TB_1x15-1MP_P2.00mm_Vertical
+JST PH series connector, B15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+17
+16
+Connector_JST
+JST_PH_B16B-PH-K_1x16_P2.00mm_Vertical
+JST PH series connector, B16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+16
+16
+Connector_JST
+JST_PH_B16B-PH-SM4-TB_1x16-1MP_P2.00mm_Vertical
+JST PH series connector, B16B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH vertical
+0
+18
+17
+Connector_JST
+JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal
+JST PH series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+2
+2
+Connector_JST
+JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal
+JST PH series connector, S2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+4
+3
+Connector_JST
+JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal
+JST PH series connector, S3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+3
+3
+Connector_JST
+JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal
+JST PH series connector, S3B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+5
+4
+Connector_JST
+JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal
+JST PH series connector, S4B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+4
+4
+Connector_JST
+JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal
+JST PH series connector, S4B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+6
+5
+Connector_JST
+JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal
+JST PH series connector, S5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+5
+5
+Connector_JST
+JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal
+JST PH series connector, S5B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+7
+6
+Connector_JST
+JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal
+JST PH series connector, S6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+6
+6
+Connector_JST
+JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal
+JST PH series connector, S6B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+8
+7
+Connector_JST
+JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal
+JST PH series connector, S7B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+7
+7
+Connector_JST
+JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_Horizontal
+JST PH series connector, S7B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+9
+8
+Connector_JST
+JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal
+JST PH series connector, S8B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+8
+8
+Connector_JST
+JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal
+JST PH series connector, S8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+10
+9
+Connector_JST
+JST_PH_S9B-PH-K_1x09_P2.00mm_Horizontal
+JST PH series connector, S9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+9
+9
+Connector_JST
+JST_PH_S9B-PH-SM4-TB_1x09-1MP_P2.00mm_Horizontal
+JST PH series connector, S9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+11
+10
+Connector_JST
+JST_PH_S10B-PH-K_1x10_P2.00mm_Horizontal
+JST PH series connector, S10B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+10
+10
+Connector_JST
+JST_PH_S10B-PH-SM4-TB_1x10-1MP_P2.00mm_Horizontal
+JST PH series connector, S10B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+12
+11
+Connector_JST
+JST_PH_S11B-PH-K_1x11_P2.00mm_Horizontal
+JST PH series connector, S11B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+11
+11
+Connector_JST
+JST_PH_S11B-PH-SM4-TB_1x11-1MP_P2.00mm_Horizontal
+JST PH series connector, S11B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+13
+12
+Connector_JST
+JST_PH_S12B-PH-K_1x12_P2.00mm_Horizontal
+JST PH series connector, S12B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+12
+12
+Connector_JST
+JST_PH_S12B-PH-SM4-TB_1x12-1MP_P2.00mm_Horizontal
+JST PH series connector, S12B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+14
+13
+Connector_JST
+JST_PH_S13B-PH-K_1x13_P2.00mm_Horizontal
+JST PH series connector, S13B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+13
+13
+Connector_JST
+JST_PH_S13B-PH-SM4-TB_1x13-1MP_P2.00mm_Horizontal
+JST PH series connector, S13B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+15
+14
+Connector_JST
+JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal
+JST PH series connector, S14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+14
+14
+Connector_JST
+JST_PH_S14B-PH-SM4-TB_1x14-1MP_P2.00mm_Horizontal
+JST PH series connector, S14B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+16
+15
+Connector_JST
+JST_PH_S15B-PH-K_1x15_P2.00mm_Horizontal
+JST PH series connector, S15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+15
+15
+Connector_JST
+JST_PH_S15B-PH-SM4-TB_1x15-1MP_P2.00mm_Horizontal
+JST PH series connector, S15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+17
+16
+Connector_JST
+JST_PH_S16B-PH-K_1x16_P2.00mm_Horizontal
+JST PH series connector, S16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator
+connector JST PH horizontal
+0
+16
+16
+Connector_JST
+JST_PUD_B08B-PUDSS_2x04_P2.00mm_Vertical
+JST PUD series connector, B08B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+8
+8
+Connector_JST
+JST_PUD_B10B-PUDSS_2x05_P2.00mm_Vertical
+JST PUD series connector, B10B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+10
+10
+Connector_JST
+JST_PUD_B12B-PUDSS_2x06_P2.00mm_Vertical
+JST PUD series connector, B12B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+12
+12
+Connector_JST
+JST_PUD_B14B-PUDSS_2x07_P2.00mm_Vertical
+JST PUD series connector, B14B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+14
+14
+Connector_JST
+JST_PUD_B16B-PUDSS_2x08_P2.00mm_Vertical
+JST PUD series connector, B16B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+16
+16
+Connector_JST
+JST_PUD_B18B-PUDSS_2x09_P2.00mm_Vertical
+JST PUD series connector, B18B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+18
+18
+Connector_JST
+JST_PUD_B20B-PUDSS_2x10_P2.00mm_Vertical
+JST PUD series connector, B20B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+20
+20
+Connector_JST
+JST_PUD_B22B-PUDSS_2x11_P2.00mm_Vertical
+JST PUD series connector, B22B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+22
+22
+Connector_JST
+JST_PUD_B24B-PUDSS_2x12_P2.00mm_Vertical
+JST PUD series connector, B24B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+24
+24
+Connector_JST
+JST_PUD_B26B-PUDSS_2x13_P2.00mm_Vertical
+JST PUD series connector, B26B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+26
+26
+Connector_JST
+JST_PUD_B28B-PUDSS_2x14_P2.00mm_Vertical
+JST PUD series connector, B28B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+28
+28
+Connector_JST
+JST_PUD_B30B-PUDSS_2x15_P2.00mm_Vertical
+JST PUD series connector, B30B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+30
+30
+Connector_JST
+JST_PUD_B32B-PUDSS_2x16_P2.00mm_Vertical
+JST PUD series connector, B32B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+32
+32
+Connector_JST
+JST_PUD_B34B-PUDSS_2x17_P2.00mm_Vertical
+JST PUD series connector, B34B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+34
+34
+Connector_JST
+JST_PUD_B36B-PUDSS_2x18_P2.00mm_Vertical
+JST PUD series connector, B36B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+36
+36
+Connector_JST
+JST_PUD_B38B-PUDSS_2x19_P2.00mm_Vertical
+JST PUD series connector, B38B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+38
+38
+Connector_JST
+JST_PUD_B40B-PUDSS_2x20_P2.00mm_Vertical
+JST PUD series connector, B40B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD vertical
+0
+40
+40
+Connector_JST
+JST_PUD_S08B-PUDSS-1_2x04_P2.00mm_Horizontal
+JST PUD series connector, S08B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+8
+8
+Connector_JST
+JST_PUD_S10B-PUDSS-1_2x05_P2.00mm_Horizontal
+JST PUD series connector, S10B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+10
+10
+Connector_JST
+JST_PUD_S12B-PUDSS-1_2x06_P2.00mm_Horizontal
+JST PUD series connector, S12B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+12
+12
+Connector_JST
+JST_PUD_S14B-PUDSS-1_2x07_P2.00mm_Horizontal
+JST PUD series connector, S14B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+14
+14
+Connector_JST
+JST_PUD_S16B-PUDSS-1_2x08_P2.00mm_Horizontal
+JST PUD series connector, S16B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+16
+16
+Connector_JST
+JST_PUD_S18B-PUDSS-1_2x09_P2.00mm_Horizontal
+JST PUD series connector, S18B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+18
+18
+Connector_JST
+JST_PUD_S20B-PUDSS-1_2x10_P2.00mm_Horizontal
+JST PUD series connector, S20B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+20
+20
+Connector_JST
+JST_PUD_S22B-PUDSS-1_2x11_P2.00mm_Horizontal
+JST PUD series connector, S22B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+22
+22
+Connector_JST
+JST_PUD_S24B-PUDSS-1_2x12_P2.00mm_Horizontal
+JST PUD series connector, S24B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+24
+24
+Connector_JST
+JST_PUD_S26B-PUDSS-1_2x13_P2.00mm_Horizontal
+JST PUD series connector, S26B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+26
+26
+Connector_JST
+JST_PUD_S28B-PUDSS-1_2x14_P2.00mm_Horizontal
+JST PUD series connector, S28B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+28
+28
+Connector_JST
+JST_PUD_S30B-PUDSS-1_2x15_P2.00mm_Horizontal
+JST PUD series connector, S30B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+30
+30
+Connector_JST
+JST_PUD_S32B-PUDSS-1_2x16_P2.00mm_Horizontal
+JST PUD series connector, S32B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+32
+32
+Connector_JST
+JST_PUD_S34B-PUDSS-1_2x17_P2.00mm_Horizontal
+JST PUD series connector, S34B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+34
+34
+Connector_JST
+JST_PUD_S36B-PUDSS-1_2x18_P2.00mm_Horizontal
+JST PUD series connector, S36B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+36
+36
+Connector_JST
+JST_PUD_S38B-PUDSS-1_2x19_P2.00mm_Horizontal
+JST PUD series connector, S38B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+38
+38
+Connector_JST
+JST_PUD_S40B-PUDSS-1_2x20_P2.00mm_Horizontal
+JST PUD series connector, S40B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator
+connector JST PUD horizontal
+0
+40
+40
+Connector_JST
+JST_SFH_SM02B-SFHRS-TF_1x02-1MP_P4.20mm_Horizontal
+JST SFH series connector, SM02B-SFHRS-TF (http://www.jst-mfg.com/product/pdf/eng/eSFH.pdf), generated with kicad-footprint-generator
+connector JST SFH horizontal
+0
+4
+3
+Connector_JST
+JST_SHD_BM20B-SRDS-A-G-TF_2x10-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 20 Circuits, Header, Vertical, With a Boss (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+22
+21
+Connector_JST
+JST_SHD_BM20B-SRDS-G-TF_2x10-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 20 Circuits, Header, Vertical (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+22
+21
+Connector_JST
+JST_SHD_BM30B-SRDS-A-G-TF_2x15-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 30 Circuits, Header, Vertical, With a Boss (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+32
+31
+Connector_JST
+JST_SHD_BM30B-SRDS-G-TF_2x15-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 30 Circuits, Header, Vertical (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+32
+31
+Connector_JST
+JST_SHD_BM40B-SRDS-A-G-TF_2x20-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 40 Circuits, Header, Vertical, With a Boss (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+42
+41
+Connector_JST
+JST_SHD_BM40B-SRDS-G-TF_2x20-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 40 Circuits, Header, Vertical (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+42
+41
+Connector_JST
+JST_SHD_BM50B-SRDS-A-G-TF_2x25-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 50 Circuits, Header, Vertical, With a Boss (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+52
+51
+Connector_JST
+JST_SHD_BM50B-SRDS-G-TF_2x25-1MP_P1.0mm_Vertical
+JST SHD series connector, 1.0 mm Pitch, 50 Circuits, Header, Vertical (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD vertical
+0
+52
+51
+Connector_JST
+JST_SHD_SM20B-SRDS-G-TF_2x10-1MP_P1.0mm_Horizontal
+JST SHD series connector, 1.0 mm Pitch, 20 Circuits, Header, Horizontal (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD horizontal
+0
+22
+21
+Connector_JST
+JST_SHD_SM30B-SRDS-G-TF_2x15-1MP_P1.0mm_Horizontal
+JST SHD series connector, 1.0 mm Pitch, 30 Circuits, Header, Horizontal (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD horizontal
+0
+32
+31
+Connector_JST
+JST_SHD_SM40B-SRDS-G-TF_2x20-1MP_P1.0mm_Horizontal
+JST SHD series connector, 1.0 mm Pitch, 40 Circuits, Header, Horizontal (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD horizontal
+0
+42
+41
+Connector_JST
+JST_SHD_SM50B-SRDS-G-TF_2x25-1MP_P1.0mm_Horizontal
+JST SHD series connector, 1.0 mm Pitch, 50 Circuits, Header, Horizontal (source: https://www.jst.com/wp-content/uploads/2021/01/eSHD-new.pdf)
+connector JST SHD horizontal
+0
+52
+51
+Connector_JST
+JST_SHL_SM02B-SHLS-TF_1x02-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM02B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+4
+3
+Connector_JST
+JST_SHL_SM05B-SHLS-TF_1x05-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM05B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+7
+6
+Connector_JST
+JST_SHL_SM06B-SHLS-TF_1x06-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM06B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+8
+7
+Connector_JST
+JST_SHL_SM07B-SHLS-TF_1x07-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM07B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+9
+8
+Connector_JST
+JST_SHL_SM08B-SHLS-TF_1x08-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM08B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+10
+9
+Connector_JST
+JST_SHL_SM10B-SHLS-TF_1x10-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM10B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+12
+11
+Connector_JST
+JST_SHL_SM11B-SHLS-TF_1x11-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM11B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+13
+12
+Connector_JST
+JST_SHL_SM12B-SHLS-TF_1x12-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM12B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+14
+13
+Connector_JST
+JST_SHL_SM14B-SHLS-TF_1x14-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM14B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+16
+15
+Connector_JST
+JST_SHL_SM16B-SHLS-TF_1x16-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM16B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+18
+17
+Connector_JST
+JST_SHL_SM20B-SHLS-TF_1x20-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM20B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+22
+21
+Connector_JST
+JST_SHL_SM22B-SHLS-TF_1x22-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM22B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+24
+23
+Connector_JST
+JST_SHL_SM26B-SHLS-TF_1x26-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM26B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+28
+27
+Connector_JST
+JST_SHL_SM30B-SHLS-TF_1x30-1MP_P1.00mm_Horizontal
+JST SHL series connector, SM30B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator
+connector JST SHL horizontal
+0
+32
+31
+Connector_JST
+JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical
+JST SH series connector, BM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+4
+3
+Connector_JST
+JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical
+JST SH series connector, BM03B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+5
+4
+Connector_JST
+JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical
+JST SH series connector, BM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+6
+5
+Connector_JST
+JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical
+JST SH series connector, BM05B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+7
+6
+Connector_JST
+JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical
+JST SH series connector, BM06B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+8
+7
+Connector_JST
+JST_SH_BM07B-SRSS-TB_1x07-1MP_P1.00mm_Vertical
+JST SH series connector, BM07B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+9
+8
+Connector_JST
+JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical
+JST SH series connector, BM08B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+10
+9
+Connector_JST
+JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical
+JST SH series connector, BM09B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+11
+10
+Connector_JST
+JST_SH_BM10B-SRSS-TB_1x10-1MP_P1.00mm_Vertical
+JST SH series connector, BM10B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+12
+11
+Connector_JST
+JST_SH_BM11B-SRSS-TB_1x11-1MP_P1.00mm_Vertical
+JST SH series connector, BM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+13
+12
+Connector_JST
+JST_SH_BM12B-SRSS-TB_1x12-1MP_P1.00mm_Vertical
+JST SH series connector, BM12B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+14
+13
+Connector_JST
+JST_SH_BM13B-SRSS-TB_1x13-1MP_P1.00mm_Vertical
+JST SH series connector, BM13B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+15
+14
+Connector_JST
+JST_SH_BM14B-SRSS-TB_1x14-1MP_P1.00mm_Vertical
+JST SH series connector, BM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+16
+15
+Connector_JST
+JST_SH_BM15B-SRSS-TB_1x15-1MP_P1.00mm_Vertical
+JST SH series connector, BM15B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH vertical
+0
+17
+16
+Connector_JST
+JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal
+JST SH series connector, SM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+4
+3
+Connector_JST
+JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal
+JST SH series connector, SM03B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+5
+4
+Connector_JST
+JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal
+JST SH series connector, SM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+6
+5
+Connector_JST
+JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal
+JST SH series connector, SM05B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+7
+6
+Connector_JST
+JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal
+JST SH series connector, SM06B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+8
+7
+Connector_JST
+JST_SH_SM07B-SRSS-TB_1x07-1MP_P1.00mm_Horizontal
+JST SH series connector, SM07B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+9
+8
+Connector_JST
+JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal
+JST SH series connector, SM08B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+10
+9
+Connector_JST
+JST_SH_SM09B-SRSS-TB_1x09-1MP_P1.00mm_Horizontal
+JST SH series connector, SM09B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+11
+10
+Connector_JST
+JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_Horizontal
+JST SH series connector, SM10B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+12
+11
+Connector_JST
+JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal
+JST SH series connector, SM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+13
+12
+Connector_JST
+JST_SH_SM12B-SRSS-TB_1x12-1MP_P1.00mm_Horizontal
+JST SH series connector, SM12B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+14
+13
+Connector_JST
+JST_SH_SM13B-SRSS-TB_1x13-1MP_P1.00mm_Horizontal
+JST SH series connector, SM13B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+15
+14
+Connector_JST
+JST_SH_SM14B-SRSS-TB_1x14-1MP_P1.00mm_Horizontal
+JST SH series connector, SM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+16
+15
+Connector_JST
+JST_SH_SM15B-SRSS-TB_1x15-1MP_P1.00mm_Horizontal
+JST SH series connector, SM15B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+17
+16
+Connector_JST
+JST_SH_SM20B-SRSS-TB_1x20-1MP_P1.00mm_Horizontal
+JST SH series connector, SM20B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator
+connector JST SH horizontal
+0
+22
+21
+Connector_JST
+JST_SUR_BM02B-SURS-TF_1x02-1MP_P0.80mm_Vertical
+JST SUR series connector, BM02B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+4
+3
+Connector_JST
+JST_SUR_BM03B-SURS-TF_1x03-1MP_P0.80mm_Vertical
+JST SUR series connector, BM03B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+5
+4
+Connector_JST
+JST_SUR_BM04B-SURS-TF_1x04-1MP_P0.80mm_Vertical
+JST SUR series connector, BM04B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+6
+5
+Connector_JST
+JST_SUR_BM05B-SURS-TF_1x05-1MP_P0.80mm_Vertical
+JST SUR series connector, BM05B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+7
+6
+Connector_JST
+JST_SUR_BM06B-SURS-TF_1x06-1MP_P0.80mm_Vertical
+JST SUR series connector, BM06B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+8
+7
+Connector_JST
+JST_SUR_BM08B-SURS-TF_1x08-1MP_P0.80mm_Vertical
+JST SUR series connector, BM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+10
+9
+Connector_JST
+JST_SUR_BM10B-SURS-TF_1x10-1MP_P0.80mm_Vertical
+JST SUR series connector, BM10B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+12
+11
+Connector_JST
+JST_SUR_BM12B-SURS-TF_1x12-1MP_P0.80mm_Vertical
+JST SUR series connector, BM12B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+14
+13
+Connector_JST
+JST_SUR_BM14B-SURS-TF_1x14-1MP_P0.80mm_Vertical
+JST SUR series connector, BM14B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+16
+15
+Connector_JST
+JST_SUR_BM15B-SURS-TF_1x15-1MP_P0.80mm_Vertical
+JST SUR series connector, BM15B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+17
+16
+Connector_JST
+JST_SUR_BM16B-SURS-TF_1x16-1MP_P0.80mm_Vertical
+JST SUR series connector, BM16B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+18
+17
+Connector_JST
+JST_SUR_BM17B-SURS-TF_1x17-1MP_P0.80mm_Vertical
+JST SUR series connector, BM17B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+19
+18
+Connector_JST
+JST_SUR_BM20B-SURS-TF_1x20-1MP_P0.80mm_Vertical
+JST SUR series connector, BM20B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR vertical
+0
+22
+21
+Connector_JST
+JST_SUR_SM02B-SURS-TF_1x02-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM02B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+4
+3
+Connector_JST
+JST_SUR_SM03B-SURS-TF_1x03-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM03B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+5
+4
+Connector_JST
+JST_SUR_SM04B-SURS-TF_1x04-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM04B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+6
+5
+Connector_JST
+JST_SUR_SM05B-SURS-TF_1x05-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM05B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+7
+6
+Connector_JST
+JST_SUR_SM06B-SURS-TF_1x06-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM06B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+8
+7
+Connector_JST
+JST_SUR_SM08B-SURS-TF_1x08-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+10
+9
+Connector_JST
+JST_SUR_SM10B-SURS-TF_1x10-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM10B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+12
+11
+Connector_JST
+JST_SUR_SM12B-SURS-TF_1x12-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM12B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+14
+13
+Connector_JST
+JST_SUR_SM14B-SURS-TF_1x14-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM14B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+16
+15
+Connector_JST
+JST_SUR_SM15B-SURS-TF_1x15-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM15B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+17
+16
+Connector_JST
+JST_SUR_SM16B-SURS-TF_1x16-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM16B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+18
+17
+Connector_JST
+JST_SUR_SM17B-SURS-TF_1x17-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM17B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+19
+18
+Connector_JST
+JST_SUR_SM20B-SURS-TF_1x20-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM20B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+22
+21
+Connector_JST
+JST_SUR_SM22B-SURS-TF_1x22-1MP_P0.80mm_Horizontal
+JST SUR series connector, SM22B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator
+connector JST SUR horizontal
+0
+24
+23
+Connector_JST
+JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical
+JST VH PBT series connector, B2P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+2
+2
+Connector_JST
+JST_VH_B2P-VH-FB-B_1x02_P3.96mm_Vertical
+JST VH series connector, B2P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+2
+2
+Connector_JST
+JST_VH_B2P-VH_1x02_P3.96mm_Vertical
+JST VH series connector, B2P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+2
+2
+Connector_JST
+JST_VH_B2P3-VH_1x02_P7.92mm_Vertical
+JST VH series connector, B2P3-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+2
+2
+Connector_JST
+JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal
+JST VH series connector, B2PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+2
+2
+Connector_JST
+JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical
+JST VH PBT series connector, B3P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+3
+3
+Connector_JST
+JST_VH_B3P-VH-FB-B_1x03_P3.96mm_Vertical
+JST VH series connector, B3P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+3
+3
+Connector_JST
+JST_VH_B3P-VH_1x03_P3.96mm_Vertical
+JST VH series connector, B3P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+3
+3
+Connector_JST
+JST_VH_B3PS-VH_1x03_P3.96mm_Horizontal
+JST VH series connector, B3PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+3
+3
+Connector_JST
+JST_VH_B4P-VH-B_1x04_P3.96mm_Vertical
+JST VH PBT series connector, B4P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+4
+4
+Connector_JST
+JST_VH_B4P-VH-FB-B_1x04_P3.96mm_Vertical
+JST VH series connector, B4P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+4
+4
+Connector_JST
+JST_VH_B4P-VH_1x04_P3.96mm_Vertical
+JST VH series connector, B4P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+4
+4
+Connector_JST
+JST_VH_B4PS-VH_1x04_P3.96mm_Horizontal
+JST VH series connector, B4PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+4
+4
+Connector_JST
+JST_VH_B5P-VH-B_1x05_P3.96mm_Vertical
+JST VH PBT series connector, B5P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+5
+5
+Connector_JST
+JST_VH_B5P-VH-FB-B_1x05_P3.96mm_Vertical
+JST VH series connector, B5P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+5
+5
+Connector_JST
+JST_VH_B5P-VH_1x05_P3.96mm_Vertical
+JST VH series connector, B5P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+5
+5
+Connector_JST
+JST_VH_B5PS-VH_1x05_P3.96mm_Horizontal
+JST VH series connector, B5PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+5
+5
+Connector_JST
+JST_VH_B6P-VH-B_1x06_P3.96mm_Vertical
+JST VH PBT series connector, B6P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+6
+6
+Connector_JST
+JST_VH_B6P-VH-FB-B_1x06_P3.96mm_Vertical
+JST VH series connector, B6P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+6
+6
+Connector_JST
+JST_VH_B6P-VH_1x06_P3.96mm_Vertical
+JST VH series connector, B6P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+6
+6
+Connector_JST
+JST_VH_B6PS-VH_1x06_P3.96mm_Horizontal
+JST VH series connector, B6PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+6
+6
+Connector_JST
+JST_VH_B7P-VH-B_1x07_P3.96mm_Vertical
+JST VH PBT series connector, B7P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+7
+7
+Connector_JST
+JST_VH_B7P-VH-FB-B_1x07_P3.96mm_Vertical
+JST VH series connector, B7P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+7
+7
+Connector_JST
+JST_VH_B7P-VH_1x07_P3.96mm_Vertical
+JST VH series connector, B7P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+7
+7
+Connector_JST
+JST_VH_B7PS-VH_1x07_P3.96mm_Horizontal
+JST VH series connector, B7PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+7
+7
+Connector_JST
+JST_VH_B8P-VH-B_1x08_P3.96mm_Vertical
+JST VH PBT series connector, B8P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+8
+8
+Connector_JST
+JST_VH_B8P-VH-FB-B_1x08_P3.96mm_Vertical
+JST VH series connector, B8P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+8
+8
+Connector_JST
+JST_VH_B8P-VH_1x08_P3.96mm_Vertical
+JST VH series connector, B8P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+8
+8
+Connector_JST
+JST_VH_B8PS-VH_1x08_P3.96mm_Horizontal
+JST VH series connector, B8PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+8
+8
+Connector_JST
+JST_VH_B9P-VH-B_1x09_P3.96mm_Vertical
+JST VH PBT series connector, B9P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+9
+9
+Connector_JST
+JST_VH_B9P-VH-FB-B_1x09_P3.96mm_Vertical
+JST VH series connector, B9P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+9
+9
+Connector_JST
+JST_VH_B9P-VH_1x09_P3.96mm_Vertical
+JST VH series connector, B9P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+9
+9
+Connector_JST
+JST_VH_B9PS-VH_1x09_P3.96mm_Horizontal
+JST VH series connector, B9PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+9
+9
+Connector_JST
+JST_VH_B10P-VH-B_1x10_P3.96mm_Vertical
+JST VH PBT series connector, B10P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+10
+10
+Connector_JST
+JST_VH_B10P-VH-FB-B_1x10_P3.96mm_Vertical
+JST VH series connector, B10P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf),  generated with kicad-footprint-generator
+connector JST VH vertical
+0
+10
+10
+Connector_JST
+JST_VH_B10P-VH_1x10_P3.96mm_Vertical
+JST VH series connector, B10P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+10
+10
+Connector_JST
+JST_VH_B10PS-VH_1x10_P3.96mm_Horizontal
+JST VH series connector, B10PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+10
+10
+Connector_JST
+JST_VH_B11P-VH-B_1x11_P3.96mm_Vertical
+JST VH PBT series connector, B11P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH vertical
+0
+11
+11
+Connector_JST
+JST_VH_S2P-VH_1x02_P3.96mm_Horizontal
+JST VH series connector, S2P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+2
+2
+Connector_JST
+JST_VH_S3P-VH_1x03_P3.96mm_Horizontal
+JST VH series connector, S3P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+3
+3
+Connector_JST
+JST_VH_S4P-VH_1x04_P3.96mm_Horizontal
+JST VH series connector, S4P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+4
+4
+Connector_JST
+JST_VH_S5P-VH_1x05_P3.96mm_Horizontal
+JST VH series connector, S5P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+5
+5
+Connector_JST
+JST_VH_S6P-VH_1x06_P3.96mm_Horizontal
+JST VH series connector, S6P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+6
+6
+Connector_JST
+JST_VH_S7P-VH_1x07_P3.96mm_Horizontal
+JST VH series connector, S7P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator
+connector JST VH horizontal
+0
+7
+7
+Connector_JST
+JST_XAG_SM05B-XAGKS-BN-TB_1x05-1MP_P2.50mm_Horizontal
+JST XAG series connector, SM05B-XAGKS-BN-TB (http://www.jst-mfg.com/product/pdf/eng/eXAG.pdf), generated with kicad-footprint-generator
+connector JST XAG horizontal
+0
+7
+6
+Connector_JST
+JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical
+JST XA series connector, B02B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+2
+2
+Connector_JST
+JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical
+JST XA series connector, B02B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+2
+2
+Connector_JST
+JST_XA_B03B-XASK-1-A_1x03_P2.50mm_Vertical
+JST XA series connector, B03B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+3
+3
+Connector_JST
+JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical
+JST XA series connector, B03B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+3
+3
+Connector_JST
+JST_XA_B04B-XASK-1-A_1x04_P2.50mm_Vertical
+JST XA series connector, B04B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+4
+4
+Connector_JST
+JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical
+JST XA series connector, B04B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+4
+4
+Connector_JST
+JST_XA_B05B-XASK-1-A_1x05_P2.50mm_Vertical
+JST XA series connector, B05B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+5
+5
+Connector_JST
+JST_XA_B05B-XASK-1_1x05_P2.50mm_Vertical
+JST XA series connector, B05B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+5
+5
+Connector_JST
+JST_XA_B06B-XASK-1-A_1x06_P2.50mm_Vertical
+JST XA series connector, B06B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+6
+6
+Connector_JST
+JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical
+JST XA series connector, B06B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+6
+6
+Connector_JST
+JST_XA_B07B-XASK-1-A_1x07_P2.50mm_Vertical
+JST XA series connector, B07B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+7
+7
+Connector_JST
+JST_XA_B07B-XASK-1_1x07_P2.50mm_Vertical
+JST XA series connector, B07B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+7
+7
+Connector_JST
+JST_XA_B08B-XASK-1-A_1x08_P2.50mm_Vertical
+JST XA series connector, B08B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+8
+8
+Connector_JST
+JST_XA_B08B-XASK-1_1x08_P2.50mm_Vertical
+JST XA series connector, B08B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+8
+8
+Connector_JST
+JST_XA_B09B-XASK-1-A_1x09_P2.50mm_Vertical
+JST XA series connector, B09B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+9
+9
+Connector_JST
+JST_XA_B09B-XASK-1_1x09_P2.50mm_Vertical
+JST XA series connector, B09B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+9
+9
+Connector_JST
+JST_XA_B10B-XASK-1-A_1x10_P2.50mm_Vertical
+JST XA series connector, B10B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+10
+10
+Connector_JST
+JST_XA_B10B-XASK-1_1x10_P2.50mm_Vertical
+JST XA series connector, B10B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+10
+10
+Connector_JST
+JST_XA_B11B-XASK-1-A_1x11_P2.50mm_Vertical
+JST XA series connector, B11B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+11
+11
+Connector_JST
+JST_XA_B11B-XASK-1_1x11_P2.50mm_Vertical
+JST XA series connector, B11B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+11
+11
+Connector_JST
+JST_XA_B12B-XASK-1-A_1x12_P2.50mm_Vertical
+JST XA series connector, B12B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+12
+12
+Connector_JST
+JST_XA_B12B-XASK-1_1x12_P2.50mm_Vertical
+JST XA series connector, B12B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+12
+12
+Connector_JST
+JST_XA_B13B-XASK-1-A_1x13_P2.50mm_Vertical
+JST XA series connector, B13B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+13
+13
+Connector_JST
+JST_XA_B13B-XASK-1_1x13_P2.50mm_Vertical
+JST XA series connector, B13B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+13
+13
+Connector_JST
+JST_XA_B14B-XASK-1-A_1x14_P2.50mm_Vertical
+JST XA series connector, B14B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+14
+14
+Connector_JST
+JST_XA_B14B-XASK-1_1x14_P2.50mm_Vertical
+JST XA series connector, B14B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+14
+14
+Connector_JST
+JST_XA_B15B-XASK-1-A_1x15_P2.50mm_Vertical
+JST XA series connector, B15B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+15
+15
+Connector_JST
+JST_XA_B15B-XASK-1_1x15_P2.50mm_Vertical
+JST XA series connector, B15B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+15
+15
+Connector_JST
+JST_XA_B18B-XASK-1_1x18_P2.50mm_Vertical
+JST XA series connector, B18B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+18
+18
+Connector_JST
+JST_XA_B20B-XASK-1-A_1x20_P2.50mm_Vertical
+JST XA series connector, B20B-XASK-1-A (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical boss
+0
+20
+20
+Connector_JST
+JST_XA_B20B-XASK-1_1x20_P2.50mm_Vertical
+JST XA series connector, B20B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA vertical
+0
+20
+20
+Connector_JST
+JST_XA_S02B-XASK-1N-BN_1x02_P2.50mm_Horizontal
+JST XA series connector, S02B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+2
+2
+Connector_JST
+JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal
+JST XA series connector, S02B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+2
+2
+Connector_JST
+JST_XA_S03B-XASK-1N-BN_1x03_P2.50mm_Horizontal
+JST XA series connector, S03B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+3
+3
+Connector_JST
+JST_XA_S03B-XASK-1_1x03_P2.50mm_Horizontal
+JST XA series connector, S03B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+3
+3
+Connector_JST
+JST_XA_S04B-XASK-1N-BN_1x04_P2.50mm_Horizontal
+JST XA series connector, S04B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+4
+4
+Connector_JST
+JST_XA_S04B-XASK-1_1x04_P2.50mm_Horizontal
+JST XA series connector, S04B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+4
+4
+Connector_JST
+JST_XA_S05B-XASK-1N-BN_1x05_P2.50mm_Horizontal
+JST XA series connector, S05B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+5
+5
+Connector_JST
+JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal
+JST XA series connector, S05B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+5
+5
+Connector_JST
+JST_XA_S06B-XASK-1N-BN_1x06_P2.50mm_Horizontal
+JST XA series connector, S06B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+6
+6
+Connector_JST
+JST_XA_S06B-XASK-1_1x06_P2.50mm_Horizontal
+JST XA series connector, S06B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+6
+6
+Connector_JST
+JST_XA_S07B-XASK-1N-BN_1x07_P2.50mm_Horizontal
+JST XA series connector, S07B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+7
+7
+Connector_JST
+JST_XA_S07B-XASK-1_1x07_P2.50mm_Horizontal
+JST XA series connector, S07B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+7
+7
+Connector_JST
+JST_XA_S08B-XASK-1N-BN_1x08_P2.50mm_Horizontal
+JST XA series connector, S08B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+8
+8
+Connector_JST
+JST_XA_S08B-XASK-1_1x08_P2.50mm_Horizontal
+JST XA series connector, S08B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+8
+8
+Connector_JST
+JST_XA_S09B-XASK-1N-BN_1x09_P2.50mm_Horizontal
+JST XA series connector, S09B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+9
+9
+Connector_JST
+JST_XA_S09B-XASK-1_1x09_P2.50mm_Horizontal
+JST XA series connector, S09B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+9
+9
+Connector_JST
+JST_XA_S10B-XASK-1N-BN_1x10_P2.50mm_Horizontal
+JST XA series connector, S10B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+10
+10
+Connector_JST
+JST_XA_S10B-XASK-1_1x10_P2.50mm_Horizontal
+JST XA series connector, S10B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+10
+10
+Connector_JST
+JST_XA_S11B-XASK-1N-BN_1x11_P2.50mm_Horizontal
+JST XA series connector, S11B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+11
+11
+Connector_JST
+JST_XA_S11B-XASK-1_1x11_P2.50mm_Horizontal
+JST XA series connector, S11B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+11
+11
+Connector_JST
+JST_XA_S12B-XASK-1N-BN_1x12_P2.50mm_Horizontal
+JST XA series connector, S12B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+12
+12
+Connector_JST
+JST_XA_S12B-XASK-1_1x12_P2.50mm_Horizontal
+JST XA series connector, S12B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+12
+12
+Connector_JST
+JST_XA_S13B-XASK-1N-BN_1x13_P2.50mm_Horizontal
+JST XA series connector, S13B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+13
+13
+Connector_JST
+JST_XA_S13B-XASK-1_1x13_P2.50mm_Horizontal
+JST XA series connector, S13B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+13
+13
+Connector_JST
+JST_XA_S14B-XASK-1N-BN_1x14_P2.50mm_Horizontal
+JST XA series connector, S14B-XASK-1N-BN (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal
+0
+14
+14
+Connector_JST
+JST_XA_S14B-XASK-1_1x14_P2.50mm_Horizontal
+JST XA series connector, S14B-XASK-1 (https://www.jst.com/wp-content/uploads/2021/01/eXA1.pdf), generated with kicad-footprint-generator
+connector JST XA horizontal hook
+0
+14
+14
+Connector_JST
+JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical
+JST XH series connector, B1B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+1
+1
+Connector_JST
+JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical
+JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+2
+2
+Connector_JST
+JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical
+JST XH series connector, B2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+2
+2
+Connector_JST
+JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical
+JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+3
+3
+Connector_JST
+JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical
+JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+3
+3
+Connector_JST
+JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical
+JST XH series connector, B4B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+4
+4
+Connector_JST
+JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical
+JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+4
+4
+Connector_JST
+JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical
+JST XH series connector, B5B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+5
+5
+Connector_JST
+JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical
+JST XH series connector, B5B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+5
+5
+Connector_JST
+JST_XH_B6B-XH-AM_1x06_P2.50mm_Vertical
+JST XH series connector, B6B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+6
+6
+Connector_JST
+JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical
+JST XH series connector, B6B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+6
+6
+Connector_JST
+JST_XH_B7B-XH-AM_1x07_P2.50mm_Vertical
+JST XH series connector, B7B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+7
+7
+Connector_JST
+JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical
+JST XH series connector, B7B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+7
+7
+Connector_JST
+JST_XH_B8B-XH-AM_1x08_P2.50mm_Vertical
+JST XH series connector, B8B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+8
+8
+Connector_JST
+JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical
+JST XH series connector, B8B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+8
+8
+Connector_JST
+JST_XH_B9B-XH-AM_1x09_P2.50mm_Vertical
+JST XH series connector, B9B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+9
+9
+Connector_JST
+JST_XH_B9B-XH-A_1x09_P2.50mm_Vertical
+JST XH series connector, B9B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+9
+9
+Connector_JST
+JST_XH_B10B-XH-AM_1x10_P2.50mm_Vertical
+JST XH series connector, B10B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+10
+10
+Connector_JST
+JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical
+JST XH series connector, B10B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+10
+10
+Connector_JST
+JST_XH_B11B-XH-A_1x11_P2.50mm_Vertical
+JST XH series connector, B11B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+11
+11
+Connector_JST
+JST_XH_B12B-XH-AM_1x12_P2.50mm_Vertical
+JST XH series connector, B12B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical boss
+0
+12
+12
+Connector_JST
+JST_XH_B12B-XH-A_1x12_P2.50mm_Vertical
+JST XH series connector, B12B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+12
+12
+Connector_JST
+JST_XH_B13B-XH-A_1x13_P2.50mm_Vertical
+JST XH series connector, B13B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+13
+13
+Connector_JST
+JST_XH_B14B-XH-A_1x14_P2.50mm_Vertical
+JST XH series connector, B14B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+14
+14
+Connector_JST
+JST_XH_B15B-XH-A_1x15_P2.50mm_Vertical
+JST XH series connector, B15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+15
+15
+Connector_JST
+JST_XH_B16B-XH-A_1x16_P2.50mm_Vertical
+JST XH series connector, B16B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+16
+16
+Connector_JST
+JST_XH_B20B-XH-A_1x20_P2.50mm_Vertical
+JST XH series connector, B20B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH vertical
+0
+20
+20
+Connector_JST
+JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal
+JST XH series connector, S2B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+2
+2
+Connector_JST
+JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal
+JST XH series connector, S2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+2
+2
+Connector_JST
+JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal
+JST XH series connector, S3B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+3
+3
+Connector_JST
+JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal
+JST XH series connector, S3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+3
+3
+Connector_JST
+JST_XH_S3B-XH-SM4-TB_1x03-1MP_P2.50mm_Horizontal
+JST XH series connector, S3B-XH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+5
+4
+Connector_JST
+JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal
+JST XH series connector, S4B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+4
+4
+Connector_JST
+JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal
+JST XH series connector, S4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+4
+4
+Connector_JST
+JST_XH_S4B-XH-SM4-TB_1x04-1MP_P2.50mm_Horizontal
+JST XH series connector, S4B-XH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+6
+5
+Connector_JST
+JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal
+JST XH series connector, S5B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+5
+5
+Connector_JST
+JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal
+JST XH series connector, S5B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+5
+5
+Connector_JST
+JST_XH_S6B-XH-A-1_1x06_P2.50mm_Horizontal
+JST XH series connector, S6B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+6
+6
+Connector_JST
+JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal
+JST XH series connector, S6B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+6
+6
+Connector_JST
+JST_XH_S6B-XH-SM4-TB_1x06-1MP_P2.50mm_Horizontal
+JST XH series connector, S6B-XH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+8
+7
+Connector_JST
+JST_XH_S7B-XH-A-1_1x07_P2.50mm_Horizontal
+JST XH series connector, S7B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+7
+7
+Connector_JST
+JST_XH_S7B-XH-A_1x07_P2.50mm_Horizontal
+JST XH series connector, S7B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+7
+7
+Connector_JST
+JST_XH_S8B-XH-A-1_1x08_P2.50mm_Horizontal
+JST XH series connector, S8B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+8
+8
+Connector_JST
+JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal
+JST XH series connector, S8B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+8
+8
+Connector_JST
+JST_XH_S9B-XH-A-1_1x09_P2.50mm_Horizontal
+JST XH series connector, S9B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+9
+9
+Connector_JST
+JST_XH_S9B-XH-A_1x09_P2.50mm_Horizontal
+JST XH series connector, S9B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+9
+9
+Connector_JST
+JST_XH_S10B-XH-A-1_1x10_P2.50mm_Horizontal
+JST XH series connector, S10B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+10
+10
+Connector_JST
+JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal
+JST XH series connector, S10B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+10
+10
+Connector_JST
+JST_XH_S11B-XH-A-1_1x11_P2.50mm_Horizontal
+JST XH series connector, S11B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+11
+11
+Connector_JST
+JST_XH_S11B-XH-A_1x11_P2.50mm_Horizontal
+JST XH series connector, S11B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+11
+11
+Connector_JST
+JST_XH_S12B-XH-A-1_1x12_P2.50mm_Horizontal
+JST XH series connector, S12B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+12
+12
+Connector_JST
+JST_XH_S12B-XH-A_1x12_P2.50mm_Horizontal
+JST XH series connector, S12B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+12
+12
+Connector_JST
+JST_XH_S13B-XH-A-1_1x13_P2.50mm_Horizontal
+JST XH series connector, S13B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+13
+13
+Connector_JST
+JST_XH_S13B-XH-A_1x13_P2.50mm_Horizontal
+JST XH series connector, S13B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+13
+13
+Connector_JST
+JST_XH_S14B-XH-A-1_1x14_P2.50mm_Horizontal
+JST XH series connector, S14B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+14
+14
+Connector_JST
+JST_XH_S14B-XH-A_1x14_P2.50mm_Horizontal
+JST XH series connector, S14B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+14
+14
+Connector_JST
+JST_XH_S15B-XH-A-1_1x15_P2.50mm_Horizontal
+JST XH series connector, S15B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+15
+15
+Connector_JST
+JST_XH_S15B-XH-A_1x15_P2.50mm_Horizontal
+JST XH series connector, S15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+15
+15
+Connector_JST
+JST_XH_S16B-XH-A_1x16_P2.50mm_Horizontal
+JST XH series connector, S16B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator
+connector JST XH horizontal
+0
+16
+16
+Connector_JST
+JST_ZE_B02B-ZESK-1D_1x02_P1.50mm_Vertical
+JST ZE series connector, B02B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+2
+2
+Connector_JST
+JST_ZE_B03B-ZESK-1D_1x03_P1.50mm_Vertical
+JST ZE series connector, B03B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+3
+3
+Connector_JST
+JST_ZE_B03B-ZESK-D_1x03_P1.50mm_Vertical
+JST ZE series connector, B03B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+3
+3
+Connector_JST
+JST_ZE_B04B-ZESK-1D_1x04_P1.50mm_Vertical
+JST ZE series connector, B04B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+4
+4
+Connector_JST
+JST_ZE_B04B-ZESK-D_1x04_P1.50mm_Vertical
+JST ZE series connector, B04B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+4
+4
+Connector_JST
+JST_ZE_B05B-ZESK-1D_1x05_P1.50mm_Vertical
+JST ZE series connector, B05B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+5
+5
+Connector_JST
+JST_ZE_B05B-ZESK-D_1x05_P1.50mm_Vertical
+JST ZE series connector, B05B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+5
+5
+Connector_JST
+JST_ZE_B06B-ZESK-1D_1x06_P1.50mm_Vertical
+JST ZE series connector, B06B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+6
+6
+Connector_JST
+JST_ZE_B06B-ZESK-D_1x06_P1.50mm_Vertical
+JST ZE series connector, B06B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+6
+6
+Connector_JST
+JST_ZE_B07B-ZESK-1D_1x07_P1.50mm_Vertical
+JST ZE series connector, B07B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+7
+7
+Connector_JST
+JST_ZE_B07B-ZESK-D_1x07_P1.50mm_Vertical
+JST ZE series connector, B07B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+7
+7
+Connector_JST
+JST_ZE_B08B-ZESK-1D_1x08_P1.50mm_Vertical
+JST ZE series connector, B08B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+8
+8
+Connector_JST
+JST_ZE_B08B-ZESK-D_1x08_P1.50mm_Vertical
+JST ZE series connector, B08B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+8
+8
+Connector_JST
+JST_ZE_B09B-ZESK-1D_1x09_P1.50mm_Vertical
+JST ZE series connector, B09B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+9
+9
+Connector_JST
+JST_ZE_B09B-ZESK-D_1x09_P1.50mm_Vertical
+JST ZE series connector, B09B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+9
+9
+Connector_JST
+JST_ZE_B10B-ZESK-1D_1x10_P1.50mm_Vertical
+JST ZE series connector, B10B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+10
+10
+Connector_JST
+JST_ZE_B10B-ZESK-D_1x10_P1.50mm_Vertical
+JST ZE series connector, B10B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+10
+10
+Connector_JST
+JST_ZE_B11B-ZESK-1D_1x11_P1.50mm_Vertical
+JST ZE series connector, B11B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+11
+11
+Connector_JST
+JST_ZE_B11B-ZESK-D_1x11_P1.50mm_Vertical
+JST ZE series connector, B11B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+11
+11
+Connector_JST
+JST_ZE_B12B-ZESK-1D_1x12_P1.50mm_Vertical
+JST ZE series connector, B12B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+12
+12
+Connector_JST
+JST_ZE_B12B-ZESK-D_1x12_P1.50mm_Vertical
+JST ZE series connector, B12B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+12
+12
+Connector_JST
+JST_ZE_B13B-ZESK-1D_1x13_P1.50mm_Vertical
+JST ZE series connector, B13B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+13
+13
+Connector_JST
+JST_ZE_B13B-ZESK-D_1x13_P1.50mm_Vertical
+JST ZE series connector, B13B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+13
+13
+Connector_JST
+JST_ZE_B14B-ZESK-1D_1x14_P1.50mm_Vertical
+JST ZE series connector, B14B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+14
+14
+Connector_JST
+JST_ZE_B14B-ZESK-D_1x14_P1.50mm_Vertical
+JST ZE series connector, B14B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+14
+14
+Connector_JST
+JST_ZE_B15B-ZESK-1D_1x15_P1.50mm_Vertical
+JST ZE series connector, B15B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+15
+15
+Connector_JST
+JST_ZE_B15B-ZESK-D_1x15_P1.50mm_Vertical
+JST ZE series connector, B15B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+15
+15
+Connector_JST
+JST_ZE_B16B-ZESK-1D_1x16_P1.50mm_Vertical
+JST ZE series connector, B16B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical boss
+0
+16
+16
+Connector_JST
+JST_ZE_B16B-ZESK-D_1x16_P1.50mm_Vertical
+JST ZE series connector, B16B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+16
+16
+Connector_JST
+JST_ZE_BM02B-ZESS-TBT_1x02-1MP_P1.50mm_Vertical
+JST ZE series connector, BM02B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+4
+3
+Connector_JST
+JST_ZE_BM03B-ZESS-TBT_1x03-1MP_P1.50mm_Vertical
+JST ZE series connector, BM03B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+5
+4
+Connector_JST
+JST_ZE_BM04B-ZESS-TBT_1x04-1MP_P1.50mm_Vertical
+JST ZE series connector, BM04B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+6
+5
+Connector_JST
+JST_ZE_BM05B-ZESS-TBT_1x05-1MP_P1.50mm_Vertical
+JST ZE series connector, BM05B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+7
+6
+Connector_JST
+JST_ZE_BM06B-ZESS-TBT_1x06-1MP_P1.50mm_Vertical
+JST ZE series connector, BM06B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+8
+7
+Connector_JST
+JST_ZE_BM07B-ZESS-TBT_1x07-1MP_P1.50mm_Vertical
+JST ZE series connector, BM07B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+9
+8
+Connector_JST
+JST_ZE_BM08B-ZESS-TBT_1x08-1MP_P1.50mm_Vertical
+JST ZE series connector, BM08B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+10
+9
+Connector_JST
+JST_ZE_BM09B-ZESS-TBT_1x09-1MP_P1.50mm_Vertical
+JST ZE series connector, BM09B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+11
+10
+Connector_JST
+JST_ZE_BM10B-ZESS-TBT_1x10-1MP_P1.50mm_Vertical
+JST ZE series connector, BM10B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+12
+11
+Connector_JST
+JST_ZE_BM11B-ZESS-TBT_1x11-1MP_P1.50mm_Vertical
+JST ZE series connector, BM11B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+13
+12
+Connector_JST
+JST_ZE_BM12B-ZESS-TBT_1x12-1MP_P1.50mm_Vertical
+JST ZE series connector, BM12B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+14
+13
+Connector_JST
+JST_ZE_BM13B-ZESS-TBT_1x13-1MP_P1.50mm_Vertical
+JST ZE series connector, BM13B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+15
+14
+Connector_JST
+JST_ZE_BM14B-ZESS-TBT_1x14-1MP_P1.50mm_Vertical
+JST ZE series connector, BM14B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+16
+15
+Connector_JST
+JST_ZE_BM15B-ZESS-TBT_1x15-1MP_P1.50mm_Vertical
+JST ZE series connector, BM15B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+17
+16
+Connector_JST
+JST_ZE_BM16B-ZESS-TBT_1x16-1MP_P1.50mm_Vertical
+JST ZE series connector, BM16B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE vertical
+0
+18
+17
+Connector_JST
+JST_ZE_S02B-ZESK-2D_1x02_P1.50mm_Horizontal
+JST ZE series connector, S02B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+2
+2
+Connector_JST
+JST_ZE_S03B-ZESK-2D_1x03_P1.50mm_Horizontal
+JST ZE series connector, S03B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+3
+3
+Connector_JST
+JST_ZE_S04B-ZESK-2D_1x04_P1.50mm_Horizontal
+JST ZE series connector, S04B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+4
+4
+Connector_JST
+JST_ZE_S05B-ZESK-2D_1x05_P1.50mm_Horizontal
+JST ZE series connector, S05B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+5
+5
+Connector_JST
+JST_ZE_S06B-ZESK-2D_1x06_P1.50mm_Horizontal
+JST ZE series connector, S06B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+6
+6
+Connector_JST
+JST_ZE_S07B-ZESK-2D_1x07_P1.50mm_Horizontal
+JST ZE series connector, S07B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+7
+7
+Connector_JST
+JST_ZE_S08B-ZESK-2D_1x08_P1.50mm_Horizontal
+JST ZE series connector, S08B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+8
+8
+Connector_JST
+JST_ZE_S09B-ZESK-2D_1x09_P1.50mm_Horizontal
+JST ZE series connector, S09B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+9
+9
+Connector_JST
+JST_ZE_S10B-ZESK-2D_1x10_P1.50mm_Horizontal
+JST ZE series connector, S10B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+10
+10
+Connector_JST
+JST_ZE_S11B-ZESK-2D_1x11_P1.50mm_Horizontal
+JST ZE series connector, S11B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+11
+11
+Connector_JST
+JST_ZE_S12B-ZESK-2D_1x12_P1.50mm_Horizontal
+JST ZE series connector, S12B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+12
+12
+Connector_JST
+JST_ZE_S13B-ZESK-2D_1x13_P1.50mm_Horizontal
+JST ZE series connector, S13B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+13
+13
+Connector_JST
+JST_ZE_S14B-ZESK-2D_1x14_P1.50mm_Horizontal
+JST ZE series connector, S14B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+14
+14
+Connector_JST
+JST_ZE_S15B-ZESK-2D_1x15_P1.50mm_Horizontal
+JST ZE series connector, S15B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+15
+15
+Connector_JST
+JST_ZE_S16B-ZESK-2D_1x16_P1.50mm_Horizontal
+JST ZE series connector, S16B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+16
+16
+Connector_JST
+JST_ZE_SM02B-ZESS-TB_1x02-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM02B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+4
+3
+Connector_JST
+JST_ZE_SM03B-ZESS-TB_1x03-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM03B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+5
+4
+Connector_JST
+JST_ZE_SM04B-ZESS-TB_1x04-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM04B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+6
+5
+Connector_JST
+JST_ZE_SM05B-ZESS-TB_1x05-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM05B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+7
+6
+Connector_JST
+JST_ZE_SM06B-ZESS-TB_1x06-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM06B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+8
+7
+Connector_JST
+JST_ZE_SM07B-ZESS-TB_1x07-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM07B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+9
+8
+Connector_JST
+JST_ZE_SM08B-ZESS-TB_1x08-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM08B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+10
+9
+Connector_JST
+JST_ZE_SM09B-ZESS-TB_1x09-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM09B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+11
+10
+Connector_JST
+JST_ZE_SM10B-ZESS-TB_1x10-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM10B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+12
+11
+Connector_JST
+JST_ZE_SM11B-ZESS-TB_1x11-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM11B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+13
+12
+Connector_JST
+JST_ZE_SM12B-ZESS-TB_1x12-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM12B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+14
+13
+Connector_JST
+JST_ZE_SM13B-ZESS-TB_1x13-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM13B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+15
+14
+Connector_JST
+JST_ZE_SM14B-ZESS-TB_1x14-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM14B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+16
+15
+Connector_JST
+JST_ZE_SM15B-ZESS-TB_1x15-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM15B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+17
+16
+Connector_JST
+JST_ZE_SM16B-ZESS-TB_1x16-1MP_P1.50mm_Horizontal
+JST ZE series connector, SM16B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator
+connector JST ZE horizontal
+0
+18
+17
+Connector_JST
+JST_ZH_B2B-ZR-SM4-TF_1x02-1MP_P1.50mm_Vertical
+JST ZH series connector, B2B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+4
+3
+Connector_JST
+JST_ZH_B2B-ZR_1x02_P1.50mm_Vertical
+JST ZH series connector, B2B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+2
+2
+Connector_JST
+JST_ZH_B3B-ZR-SM4-TF_1x03-1MP_P1.50mm_Vertical
+JST ZH series connector, B3B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+5
+4
+Connector_JST
+JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical
+JST ZH series connector, B3B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+3
+3
+Connector_JST
+JST_ZH_B4B-ZR-SM4-TF_1x04-1MP_P1.50mm_Vertical
+JST ZH series connector, B4B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+6
+5
+Connector_JST
+JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical
+JST ZH series connector, B4B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+4
+4
+Connector_JST
+JST_ZH_B5B-ZR-SM4-TF_1x05-1MP_P1.50mm_Vertical
+JST ZH series connector, B5B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+7
+6
+Connector_JST
+JST_ZH_B5B-ZR_1x05_P1.50mm_Vertical
+JST ZH series connector, B5B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+5
+5
+Connector_JST
+JST_ZH_B6B-ZR-SM4-TF_1x06-1MP_P1.50mm_Vertical
+JST ZH series connector, B6B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+8
+7
+Connector_JST
+JST_ZH_B6B-ZR_1x06_P1.50mm_Vertical
+JST ZH series connector, B6B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+6
+6
+Connector_JST
+JST_ZH_B7B-ZR-SM4-TF_1x07-1MP_P1.50mm_Vertical
+JST ZH series connector, B7B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+9
+8
+Connector_JST
+JST_ZH_B7B-ZR_1x07_P1.50mm_Vertical
+JST ZH series connector, B7B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+7
+7
+Connector_JST
+JST_ZH_B8B-ZR-SM4-TF_1x08-1MP_P1.50mm_Vertical
+JST ZH series connector, B8B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+10
+9
+Connector_JST
+JST_ZH_B8B-ZR_1x08_P1.50mm_Vertical
+JST ZH series connector, B8B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+8
+8
+Connector_JST
+JST_ZH_B9B-ZR-SM4-TF_1x09-1MP_P1.50mm_Vertical
+JST ZH series connector, B9B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+11
+10
+Connector_JST
+JST_ZH_B9B-ZR_1x09_P1.50mm_Vertical
+JST ZH series connector, B9B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+9
+9
+Connector_JST
+JST_ZH_B10B-ZR-SM4-TF_1x10-1MP_P1.50mm_Vertical
+JST ZH series connector, B10B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+12
+11
+Connector_JST
+JST_ZH_B10B-ZR_1x10_P1.50mm_Vertical
+JST ZH series connector, B10B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+10
+10
+Connector_JST
+JST_ZH_B11B-ZR-SM4-TF_1x11-1MP_P1.50mm_Vertical
+JST ZH series connector, B11B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+13
+12
+Connector_JST
+JST_ZH_B11B-ZR_1x11_P1.50mm_Vertical
+JST ZH series connector, B11B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+11
+11
+Connector_JST
+JST_ZH_B12B-ZR-SM4-TF_1x12-1MP_P1.50mm_Vertical
+JST ZH series connector, B12B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+14
+13
+Connector_JST
+JST_ZH_B12B-ZR_1x12_P1.50mm_Vertical
+JST ZH series connector, B12B-ZR (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+12
+12
+Connector_JST
+JST_ZH_B13B-ZR-SM4-TF_1x13-1MP_P1.50mm_Vertical
+JST ZH series connector, B13B-ZR-SM4-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH vertical
+0
+15
+14
+Connector_JST
+JST_ZH_S2B-ZR-SM4A-TF_1x02-1MP_P1.50mm_Horizontal
+JST ZH series connector, S2B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+4
+3
+Connector_JST
+JST_ZH_S3B-ZR-SM4A-TF_1x03-1MP_P1.50mm_Horizontal
+JST ZH series connector, S3B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+5
+4
+Connector_JST
+JST_ZH_S4B-ZR-SM4A-TF_1x04-1MP_P1.50mm_Horizontal
+JST ZH series connector, S4B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+6
+5
+Connector_JST
+JST_ZH_S5B-ZR-SM4A-TF_1x05-1MP_P1.50mm_Horizontal
+JST ZH series connector, S5B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+7
+6
+Connector_JST
+JST_ZH_S6B-ZR-SM4A-TF_1x06-1MP_P1.50mm_Horizontal
+JST ZH series connector, S6B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+8
+7
+Connector_JST
+JST_ZH_S7B-ZR-SM4A-TF_1x07-1MP_P1.50mm_Horizontal
+JST ZH series connector, S7B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+9
+8
+Connector_JST
+JST_ZH_S8B-ZR-SM4A-TF_1x08-1MP_P1.50mm_Horizontal
+JST ZH series connector, S8B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+10
+9
+Connector_JST
+JST_ZH_S9B-ZR-SM4A-TF_1x09-1MP_P1.50mm_Horizontal
+JST ZH series connector, S9B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+11
+10
+Connector_JST
+JST_ZH_S10B-ZR-SM4A-TF_1x10-1MP_P1.50mm_Horizontal
+JST ZH series connector, S10B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+12
+11
+Connector_JST
+JST_ZH_S11B-ZR-SM4A-TF_1x11-1MP_P1.50mm_Horizontal
+JST ZH series connector, S11B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+13
+12
+Connector_JST
+JST_ZH_S12B-ZR-SM4A-TF_1x12-1MP_P1.50mm_Horizontal
+JST ZH series connector, S12B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+14
+13
+Connector_JST
+JST_ZH_S13B-ZR-SM4A-TF_1x13-1MP_P1.50mm_Horizontal
+JST ZH series connector, S13B-ZR-SM4A-TF (http://www.jst-mfg.com/product/pdf/eng/eZH.pdf), generated with kicad-footprint-generator
+connector JST ZH horizontal
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502382-0270_1x02-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0270 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_502382-0370_1x03-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0370 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_502382-0470_1x04-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0470 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_502382-0570_1x05-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+7
+6
+Connector_Molex
+Molex_CLIK-Mate_502382-0670_1x06-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0670 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_502382-0770_1x07-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0770 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+9
+8
+Connector_Molex
+Molex_CLIK-Mate_502382-0870_1x08-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0870 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_502382-0970_1x09-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-0970 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+11
+10
+Connector_Molex
+Molex_CLIK-Mate_502382-1070_1x10-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1070 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+12
+11
+Connector_Molex
+Molex_CLIK-Mate_502382-1170_1x11-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1170 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+13
+12
+Connector_Molex
+Molex_CLIK-Mate_502382-1270_1x12-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1270 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_502382-1370_1x13-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1370 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502382-1470_1x14-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1470 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_502382-1570_1x15-1MP_P1.25mm_Vertical
+Molex CLIK-Mate series connector, 502382-1570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+17
+16
+Connector_Molex
+Molex_CLIK-Mate_502386-0270_1x02-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0270 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_502386-0370_1x03-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_502386-0470_1x04-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0470 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_502386-0570_1x05-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0570 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+7
+6
+Connector_Molex
+Molex_CLIK-Mate_502386-0670_1x06-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0670 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_502386-0770_1x07-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0770 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+9
+8
+Connector_Molex
+Molex_CLIK-Mate_502386-0870_1x08-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0870 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_502386-0970_1x09-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-0970 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+11
+10
+Connector_Molex
+Molex_CLIK-Mate_502386-1070_1x10-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1070 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+12
+11
+Connector_Molex
+Molex_CLIK-Mate_502386-1170_1x11-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1170 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+13
+12
+Connector_Molex
+Molex_CLIK-Mate_502386-1270_1x12-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1270 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_502386-1370_1x13-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502386-1470_1x14-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1470 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_502386-1570_1x15-1MP_P1.25mm_Horizontal
+Molex CLIK-Mate series connector, 502386-1570 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+17
+16
+Connector_Molex
+Molex_CLIK-Mate_502443-0270_1x02-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0270 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_502443-0370_1x03-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0370 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_502443-0470_1x04-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0470 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_502443-0570_1x05-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0570 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+7
+6
+Connector_Molex
+Molex_CLIK-Mate_502443-0670_1x06-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0670 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_502443-0770_1x07-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0770 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+9
+8
+Connector_Molex
+Molex_CLIK-Mate_502443-0870_1x08-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0870 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_502443-0970_1x09-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-0970 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+11
+10
+Connector_Molex
+Molex_CLIK-Mate_502443-1270_1x12-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-1270 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_502443-1370_1x13-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-1370 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502443-1470_1x14-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-1470 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_502443-1570_1x15-1MP_P2.00mm_Vertical
+Molex CLIK-Mate series connector, 502443-1570 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+17
+16
+Connector_Molex
+Molex_CLIK-Mate_502494-0270_1x02-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-0270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_502494-0370_1x03-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-0370 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_502494-0470_1x04-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-0470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_502494-0670_1x06-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-0670 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_502494-0870_1x08-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-0870 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_502494-1070_1x10-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-1070 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+12
+11
+Connector_Molex
+Molex_CLIK-Mate_502494-1270_1x12-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-1270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_502494-1370_1x13-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-1370 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502494-1470_1x14-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-1470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_502494-1570_1x15-1MP_P2.00mm_Horizontal
+Molex CLIK-Mate series connector, 502494-1570 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+17
+16
+Connector_Molex
+Molex_CLIK-Mate_502585-0270_1x02-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0270 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_502585-0370_1x03-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0370 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_502585-0470_1x04-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0470 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_502585-0570_1x05-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0570 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+7
+6
+Connector_Molex
+Molex_CLIK-Mate_502585-0670_1x06-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0670 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_502585-0770_1x07-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0770 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+9
+8
+Connector_Molex
+Molex_CLIK-Mate_502585-0870_1x08-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0870 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_502585-0970_1x09-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-0970 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+11
+10
+Connector_Molex
+Molex_CLIK-Mate_502585-1070_1x10-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1070 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+12
+11
+Connector_Molex
+Molex_CLIK-Mate_502585-1170_1x11-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1170 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+13
+12
+Connector_Molex
+Molex_CLIK-Mate_502585-1270_1x12-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1270 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_502585-1370_1x13-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1370 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_502585-1470_1x14-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1470 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_502585-1570_1x15-1MP_P1.50mm_Horizontal
+Molex CLIK-Mate series connector, 502585-1570 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate horizontal
+0
+17
+16
+Connector_Molex
+Molex_CLIK-Mate_505405-0270_1x02-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+4
+3
+Connector_Molex
+Molex_CLIK-Mate_505405-0370_1x03-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+5
+4
+Connector_Molex
+Molex_CLIK-Mate_505405-0470_1x04-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0470 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+6
+5
+Connector_Molex
+Molex_CLIK-Mate_505405-0570_1x05-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0570 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+7
+6
+Connector_Molex
+Molex_CLIK-Mate_505405-0670_1x06-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0670 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+8
+7
+Connector_Molex
+Molex_CLIK-Mate_505405-0770_1x07-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0770 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+9
+8
+Connector_Molex
+Molex_CLIK-Mate_505405-0870_1x08-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0870 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+10
+9
+Connector_Molex
+Molex_CLIK-Mate_505405-0970_1x09-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-0970 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+11
+10
+Connector_Molex
+Molex_CLIK-Mate_505405-1070_1x10-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1070 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+12
+11
+Connector_Molex
+Molex_CLIK-Mate_505405-1170_1x11-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1170 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+13
+12
+Connector_Molex
+Molex_CLIK-Mate_505405-1270_1x12-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+14
+13
+Connector_Molex
+Molex_CLIK-Mate_505405-1370_1x13-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+15
+14
+Connector_Molex
+Molex_CLIK-Mate_505405-1470_1x14-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1470 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+16
+15
+Connector_Molex
+Molex_CLIK-Mate_505405-1570_1x15-1MP_P1.50mm_Vertical
+Molex CLIK-Mate series connector, 505405-1570 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator
+connector Molex CLIK-Mate vertical
+0
+17
+16
+Connector_Molex
+Molex_DuraClik_502352-0200_1x02-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0200 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+4
+3
+Connector_Molex
+Molex_DuraClik_502352-0300_1x03-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0300 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+5
+4
+Connector_Molex
+Molex_DuraClik_502352-0400_1x04-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0400 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+6
+5
+Connector_Molex
+Molex_DuraClik_502352-0500_1x05-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0500 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+7
+6
+Connector_Molex
+Molex_DuraClik_502352-0600_1x06-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0600 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+8
+7
+Connector_Molex
+Molex_DuraClik_502352-0700_1x07-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0700 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+9
+8
+Connector_Molex
+Molex_DuraClik_502352-0800_1x08-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0800 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+10
+9
+Connector_Molex
+Molex_DuraClik_502352-0900_1x09-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-0900 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+11
+10
+Connector_Molex
+Molex_DuraClik_502352-1000_1x10-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1000 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+12
+11
+Connector_Molex
+Molex_DuraClik_502352-1100_1x11-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1100 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+13
+12
+Connector_Molex
+Molex_DuraClik_502352-1200_1x12-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1200 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+14
+13
+Connector_Molex
+Molex_DuraClik_502352-1300_1x13-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1300 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+15
+14
+Connector_Molex
+Molex_DuraClik_502352-1400_1x14-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1400 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+16
+15
+Connector_Molex
+Molex_DuraClik_502352-1500_1x15-1MP_P2.00mm_Horizontal
+Molex DuraClik series connector, 502352-1500 (http://www.molex.com/pdm_docs/sd/5023520200_sd.pdf), generated with kicad-footprint-generator
+connector Molex DuraClik horizontal
+0
+17
+16
+Connector_Molex
+Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-02A example for new part number: 22-27-2021, 2 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+2
+2
+Connector_Molex
+Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-03A example for new part number: 22-27-2031, 3 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+3
+3
+Connector_Molex
+Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-04A example for new part number: 22-27-2041, 4 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+4
+4
+Connector_Molex
+Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-05A example for new part number: 22-27-2051, 5 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+5
+5
+Connector_Molex
+Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-06A example for new part number: 22-27-2061, 6 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+6
+6
+Connector_Molex
+Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-07A example for new part number: 22-27-2071, 7 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+7
+7
+Connector_Molex
+Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-08A example for new part number: 22-27-2081, 8 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+8
+8
+Connector_Molex
+Molex_KK-254_AE-6410-09A_1x09_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-09A example for new part number: 22-27-2091, 9 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+9
+9
+Connector_Molex
+Molex_KK-254_AE-6410-10A_1x10_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-10A example for new part number: 22-27-2101, 10 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+10
+10
+Connector_Molex
+Molex_KK-254_AE-6410-11A_1x11_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-11A example for new part number: 22-27-2111, 11 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+11
+11
+Connector_Molex
+Molex_KK-254_AE-6410-12A_1x12_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-12A example for new part number: 22-27-2121, 12 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+12
+12
+Connector_Molex
+Molex_KK-254_AE-6410-13A_1x13_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-13A example for new part number: 22-27-2131, 13 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+13
+13
+Connector_Molex
+Molex_KK-254_AE-6410-14A_1x14_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-14A example for new part number: 22-27-2141, 14 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+14
+14
+Connector_Molex
+Molex_KK-254_AE-6410-15A_1x15_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-15A example for new part number: 22-27-2151, 15 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+15
+15
+Connector_Molex
+Molex_KK-254_AE-6410-16A_1x16_P2.54mm_Vertical
+Molex KK-254 Interconnect System, old/engineering part number: AE-6410-16A example for new part number: 22-27-2161, 16 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-254 vertical
+0
+16
+16
+Connector_Molex
+Molex_KK-396_5273-02A_1x02_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-02A example for new part number: 09-65-2028, 2 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+2
+2
+Connector_Molex
+Molex_KK-396_5273-03A_1x03_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-03A example for new part number: 09-65-2038, 3 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+3
+3
+Connector_Molex
+Molex_KK-396_5273-04A_1x04_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-04A example for new part number: 09-65-2048, 4 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+4
+4
+Connector_Molex
+Molex_KK-396_5273-05A_1x05_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-05A example for new part number: 09-65-2058, 5 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+5
+5
+Connector_Molex
+Molex_KK-396_5273-06A_1x06_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-06A example for new part number: 09-65-2068, 6 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+6
+6
+Connector_Molex
+Molex_KK-396_5273-07A_1x07_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-07A example for new part number: 09-65-2078, 7 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+7
+7
+Connector_Molex
+Molex_KK-396_5273-08A_1x08_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-08A example for new part number: 09-65-2088, 8 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+8
+8
+Connector_Molex
+Molex_KK-396_5273-09A_1x09_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-09A example for new part number: 09-65-2098, 9 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+9
+9
+Connector_Molex
+Molex_KK-396_5273-10A_1x10_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-10A example for new part number: 09-65-2108, 10 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+10
+10
+Connector_Molex
+Molex_KK-396_5273-11A_1x11_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-11A example for new part number: 09-65-2118, 11 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+11
+11
+Connector_Molex
+Molex_KK-396_5273-12A_1x12_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: 5273-12A example for new part number: 09-65-2128, 12 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+12
+12
+Connector_Molex
+Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0002 example for new part number: 26-60-4020, 2 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+2
+2
+Connector_Molex
+Molex_KK-396_A-41791-0003_1x03_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0003 example for new part number: 26-60-4030, 3 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+3
+3
+Connector_Molex
+Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0004 example for new part number: 26-60-4040, 4 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+4
+4
+Connector_Molex
+Molex_KK-396_A-41791-0005_1x05_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0005 example for new part number: 26-60-4050, 5 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+5
+5
+Connector_Molex
+Molex_KK-396_A-41791-0006_1x06_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0006 example for new part number: 26-60-4060, 6 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+6
+6
+Connector_Molex
+Molex_KK-396_A-41791-0007_1x07_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0007 example for new part number: 26-60-4070, 7 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+7
+7
+Connector_Molex
+Molex_KK-396_A-41791-0008_1x08_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0008 example for new part number: 26-60-4080, 8 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+8
+8
+Connector_Molex
+Molex_KK-396_A-41791-0009_1x09_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0009 example for new part number: 26-60-4090, 9 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+9
+9
+Connector_Molex
+Molex_KK-396_A-41791-0010_1x10_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0010 example for new part number: 26-60-4100, 10 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+10
+10
+Connector_Molex
+Molex_KK-396_A-41791-0011_1x11_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0011 example for new part number: 26-60-4110, 11 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+11
+11
+Connector_Molex
+Molex_KK-396_A-41791-0012_1x12_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0012 example for new part number: 26-60-4120, 12 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+12
+12
+Connector_Molex
+Molex_KK-396_A-41791-0013_1x13_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0013 example for new part number: 26-60-4130, 13 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+13
+13
+Connector_Molex
+Molex_KK-396_A-41791-0014_1x14_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0014 example for new part number: 26-60-4140, 14 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+14
+14
+Connector_Molex
+Molex_KK-396_A-41791-0015_1x15_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0015 example for new part number: 26-60-4150, 15 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+15
+15
+Connector_Molex
+Molex_KK-396_A-41791-0016_1x16_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0016 example for new part number: 26-60-4160, 16 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+16
+16
+Connector_Molex
+Molex_KK-396_A-41791-0017_1x17_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0017 example for new part number: 26-60-4170, 17 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+17
+17
+Connector_Molex
+Molex_KK-396_A-41791-0018_1x18_P3.96mm_Vertical
+Molex KK 396 Interconnect System, old/engineering part number: A-41791-0018 example for new part number: 26-60-4180, 18 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 vertical
+0
+18
+18
+Connector_Molex
+Molex_KK-396_A-41792-0002_1x02_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0002 example for new part number: 26-60-5020, 2 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+2
+2
+Connector_Molex
+Molex_KK-396_A-41792-0003_1x03_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0003 example for new part number: 26-60-5030, 3 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+3
+3
+Connector_Molex
+Molex_KK-396_A-41792-0004_1x04_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0004 example for new part number: 26-60-5040, 4 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+4
+4
+Connector_Molex
+Molex_KK-396_A-41792-0005_1x05_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0005 example for new part number: 26-60-5050, 5 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+5
+5
+Connector_Molex
+Molex_KK-396_A-41792-0006_1x06_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0006 example for new part number: 26-60-5060, 6 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+6
+6
+Connector_Molex
+Molex_KK-396_A-41792-0007_1x07_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0007 example for new part number: 26-60-5070, 7 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+7
+7
+Connector_Molex
+Molex_KK-396_A-41792-0008_1x08_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0008 example for new part number: 26-60-5080, 8 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+8
+8
+Connector_Molex
+Molex_KK-396_A-41792-0009_1x09_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0009 example for new part number: 26-60-5090, 9 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+9
+9
+Connector_Molex
+Molex_KK-396_A-41792-0010_1x10_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0010 example for new part number: 26-60-5100, 10 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+10
+10
+Connector_Molex
+Molex_KK-396_A-41792-0011_1x11_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0011 example for new part number: 26-60-5110, 11 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+11
+11
+Connector_Molex
+Molex_KK-396_A-41792-0012_1x12_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0012 example for new part number: 26-60-5120, 12 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+12
+12
+Connector_Molex
+Molex_KK-396_A-41792-0013_1x13_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0013 example for new part number: 26-60-5130, 13 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+13
+13
+Connector_Molex
+Molex_KK-396_A-41792-0014_1x14_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0014 example for new part number: 26-60-5140, 14 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+14
+14
+Connector_Molex
+Molex_KK-396_A-41792-0015_1x15_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0015 example for new part number: 26-60-5150, 15 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+15
+15
+Connector_Molex
+Molex_KK-396_A-41792-0016_1x16_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0016 example for new part number: 26-60-5160, 16 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+16
+16
+Connector_Molex
+Molex_KK-396_A-41792-0017_1x17_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0017 example for new part number: 26-60-5170, 17 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+17
+17
+Connector_Molex
+Molex_KK-396_A-41792-0018_1x18_P3.96mm_Horizontal
+Molex KK 396 Interconnect System, old/engineering part number: A-41792-0018 example for new part number: 26-60-5180, 18 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator
+connector Molex KK-396 horizontal
+0
+18
+18
+Connector_Molex
+Molex_Mega-Fit_76825-0002_2x01_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0002 (compatible alternatives: 172064-0002, 172064-1002), 1 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+2
+2
+Connector_Molex
+Molex_Mega-Fit_76825-0004_2x02_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0004 (compatible alternatives: 172064-0004, 172064-1004), 2 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+4
+4
+Connector_Molex
+Molex_Mega-Fit_76825-0006_2x03_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0006 (compatible alternatives: 172064-0006, 172064-1006), 3 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+6
+6
+Connector_Molex
+Molex_Mega-Fit_76825-0008_2x04_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0008 (compatible alternatives: 172064-0008, 172064-1008), 4 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+8
+8
+Connector_Molex
+Molex_Mega-Fit_76825-0010_2x05_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0010 (compatible alternatives: 172064-0010, 172064-1010), 5 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+10
+10
+Connector_Molex
+Molex_Mega-Fit_76825-0012_2x06_P5.70mm_Horizontal
+Molex Mega-Fit Power Connectors, 76825-0012 (compatible alternatives: 172064-0012, 172064-1012), 6 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit horizontal
+0
+12
+12
+Connector_Molex
+Molex_Mega-Fit_76829-0002_2x01_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0002 (compatible alternatives: 172065-0002, 172065-1002), 1 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+2
+2
+Connector_Molex
+Molex_Mega-Fit_76829-0004_2x02_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0004 (compatible alternatives: 172065-0004, 172065-1004), 2 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+4
+4
+Connector_Molex
+Molex_Mega-Fit_76829-0006_2x03_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0006 (compatible alternatives: 172065-0006, 172065-1006), 3 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+6
+6
+Connector_Molex
+Molex_Mega-Fit_76829-0008_2x04_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0008 (compatible alternatives: 172065-0008, 172065-1008), 4 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+8
+8
+Connector_Molex
+Molex_Mega-Fit_76829-0010_2x05_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0010 (compatible alternatives: 172065-0010, 172065-1010), 5 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+10
+10
+Connector_Molex
+Molex_Mega-Fit_76829-0012_2x06_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0012 (compatible alternatives: 172065-0012, 172065-1012), 6 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+12
+12
+Connector_Molex
+Molex_Mega-Fit_76829-0102_2x01_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0102 (compatible alternatives: 172065-0202, 172065-0302), 1 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+2
+2
+Connector_Molex
+Molex_Mega-Fit_76829-0104_2x02_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0104 (compatible alternatives: 172065-0204, 172065-0304), 2 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+4
+4
+Connector_Molex
+Molex_Mega-Fit_76829-0106_2x03_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0106 (compatible alternatives: 172065-0206, 172065-0306), 3 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+6
+6
+Connector_Molex
+Molex_Mega-Fit_76829-0108_2x04_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0108 (compatible alternatives: 172065-0208, 172065-0308), 4 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+8
+8
+Connector_Molex
+Molex_Mega-Fit_76829-0110_2x05_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0110 (compatible alternatives: 172065-0210, 172065-0310), 5 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+10
+10
+Connector_Molex
+Molex_Mega-Fit_76829-0112_2x06_P5.70mm_Vertical
+Molex Mega-Fit Power Connectors, 76829-0112 (compatible alternatives: 172065-0212, 172065-0312), 6 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mega-Fit vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0200 (alternative finishes: 43045-020x), 1 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0210_2x01-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0210 (compatible alternatives: 43045-0211, 43045-0209), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0212 (compatible alternatives: 43045-0213, 43045-0224), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0215_2x01_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0215 (compatible alternatives: 43045-0216, 43045-0217), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0218_2x01-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0218 (compatible alternatives: 43045-0219, 43045-0220), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0221_2x01-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0221 (alternative finishes: 43045-022x), 1 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0400 (alternative finishes: 43045-040x), 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0410_2x02-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0410 (compatible alternatives: 43045-0411, 43045-0409), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0412 (compatible alternatives: 43045-0413, 43045-0424), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0415_2x02_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0415 (compatible alternatives: 43045-0416, 43045-0417), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0418_2x02-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0418 (compatible alternatives: 43045-0419, 43045-0420), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0421_2x02-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0421 (alternative finishes: 43045-042x), 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0600 (alternative finishes: 43045-060x), 3 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0610_2x03-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0610 (compatible alternatives: 43045-0611, 43045-0609), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0612 (compatible alternatives: 43045-0613, 43045-0624), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0615_2x03_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0615 (compatible alternatives: 43045-0616, 43045-0617), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0618_2x03-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0618 (compatible alternatives: 43045-0619, 43045-0620), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0621_2x03-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0621 (alternative finishes: 43045-062x), 3 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0800 (alternative finishes: 43045-080x), 4 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0810_2x04-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0810 (compatible alternatives: 43045-0811, 43045-0809), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0812 (compatible alternatives: 43045-0813, 43045-0824), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0815_2x04_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0815 (compatible alternatives: 43045-0816, 43045-0817), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0818_2x04-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-0818 (compatible alternatives: 43045-0819, 43045-0820), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-0821_2x04-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-0821 (alternative finishes: 43045-082x), 4 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1000_2x05_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1000 (alternative finishes: 43045-100x), 5 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1010_2x05-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1010 (compatible alternatives: 43045-1011, 43045-1009), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1012_2x05_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1012 (compatible alternatives: 43045-1013, 43045-1024), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1015_2x05_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1015 (compatible alternatives: 43045-1016, 43045-1017), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1018_2x05-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1018 (compatible alternatives: 43045-1019, 43045-1020), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1021_2x05-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1021 (alternative finishes: 43045-102x), 5 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1200_2x06_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1200 (alternative finishes: 43045-120x), 6 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1210_2x06-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1210 (compatible alternatives: 43045-1211, 43045-1209), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+14
+13
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1212_2x06_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1212 (compatible alternatives: 43045-1213, 43045-1224), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1215_2x06_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1215 (compatible alternatives: 43045-1216, 43045-1217), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1218_2x06-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1218 (compatible alternatives: 43045-1219, 43045-1220), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+14
+13
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1221_2x06-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1221 (alternative finishes: 43045-122x), 6 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+14
+13
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1400_2x07_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1400 (alternative finishes: 43045-140x), 7 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+14
+14
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1410_2x07-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1410 (compatible alternatives: 43045-1411, 43045-1409), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+16
+15
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1412_2x07_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1412 (compatible alternatives: 43045-1413, 43045-1424), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+14
+14
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1415_2x07_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1415 (compatible alternatives: 43045-1416, 43045-1417), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+14
+14
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1418_2x07-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1418 (compatible alternatives: 43045-1419, 43045-1420), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+16
+15
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1421_2x07-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1421 (alternative finishes: 43045-142x), 7 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+16
+15
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1600_2x08_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1600 (alternative finishes: 43045-160x), 8 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+16
+16
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1610_2x08-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1610 (compatible alternatives: 43045-1611, 43045-1609), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+18
+17
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1612_2x08_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1612 (compatible alternatives: 43045-1613, 43045-1624), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+16
+16
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1615_2x08_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1615 (compatible alternatives: 43045-1616, 43045-1617), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+16
+16
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1618_2x08-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1618 (compatible alternatives: 43045-1619, 43045-1620), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+18
+17
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1621_2x08-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1621 (alternative finishes: 43045-162x), 8 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+18
+17
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1800_2x09_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1800 (alternative finishes: 43045-180x), 9 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+18
+18
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1810_2x09-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1810 (compatible alternatives: 43045-1811, 43045-1809), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+20
+19
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1812_2x09_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1812 (compatible alternatives: 43045-1813, 43045-1824), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+18
+18
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1815_2x09_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1815 (compatible alternatives: 43045-1816, 43045-1817), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+18
+18
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1818_2x09-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-1818 (compatible alternatives: 43045-1819, 43045-1820), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+20
+19
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-1821_2x09-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-1821 (alternative finishes: 43045-182x), 9 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+20
+19
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2000_2x10_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2000 (alternative finishes: 43045-200x), 10 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+20
+20
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2010_2x10-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2010 (compatible alternatives: 43045-2011, 43045-2009), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+22
+21
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2012_2x10_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2012 (compatible alternatives: 43045-2013, 43045-2024), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+20
+20
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2015_2x10_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2015 (compatible alternatives: 43045-2016, 43045-2017), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+20
+20
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2018_2x10-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2018 (compatible alternatives: 43045-2019, 43045-2020), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+22
+21
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2021_2x10-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2021 (alternative finishes: 43045-202x), 10 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+22
+21
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2200_2x11_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2200 (alternative finishes: 43045-220x), 11 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+22
+22
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2210_2x11-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2210 (compatible alternatives: 43045-2211, 43045-2209), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+24
+23
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2212_2x11_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2212 (compatible alternatives: 43045-2213, 43045-2224), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+22
+22
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2215_2x11_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2215 (compatible alternatives: 43045-2216, 43045-2217), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+22
+22
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2218_2x11-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2218 (compatible alternatives: 43045-2219, 43045-2220), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+24
+23
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2221_2x11-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2221 (alternative finishes: 43045-222x), 11 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+24
+23
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2400_2x12_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2400 (alternative finishes: 43045-240x), 12 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+24
+24
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2410_2x12-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2410 (compatible alternatives: 43045-2411, 43045-2409), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+26
+25
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2412_2x12_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2412 (compatible alternatives: 43045-2413, 43045-2424), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+24
+24
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2415_2x12_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2415 (compatible alternatives: 43045-2416, 43045-2417), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+24
+24
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2418_2x12-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43045-2418 (compatible alternatives: 43045-2419, 43045-2420), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+26
+25
+Connector_Molex
+Molex_Micro-Fit_3.0_43045-2421_2x12-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43045-2421 (alternative finishes: 43045-242x), 12 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+26
+25
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0200 (compatible alternatives: 43650-0201, 43650-0202), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0210 (compatible alternatives: 43650-0211, 43650-0209), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0210 (compatible alternatives: 43650-0211, 43650-0209), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0215 (compatible alternatives: 43650-0216, 43650-0217), 2 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0221_1x02_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0221 (compatible alternatives: 43650-0222, 43650-0223), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+2
+2
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0224_1x02-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0224 (compatible alternatives: 43650-0225, 43650-0226), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0300 (compatible alternatives: 43650-0301, 43650-0302), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+3
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0310 (compatible alternatives: 43650-0311, 43650-0309), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+5
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0310 (compatible alternatives: 43650-0311, 43650-0309), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+5
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0315 (compatible alternatives: 43650-0316, 43650-0317), 3 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+3
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0321_1x03_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0321 (compatible alternatives: 43650-0322, 43650-0323), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+3
+3
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0324_1x03-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0324 (compatible alternatives: 43650-0325, 43650-0326), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+5
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0400 (compatible alternatives: 43650-0401, 43650-0402), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0410 (compatible alternatives: 43650-0411, 43650-0409), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0410 (compatible alternatives: 43650-0411, 43650-0409), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0415 (compatible alternatives: 43650-0416, 43650-0417), 4 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0421_1x04_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0421 (compatible alternatives: 43650-0422, 43650-0423), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+4
+4
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0424_1x04-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0424 (compatible alternatives: 43650-0425, 43650-0426), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0500_1x05_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0500 (compatible alternatives: 43650-0501, 43650-0502), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+5
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0510_1x05-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0510 (compatible alternatives: 43650-0511, 43650-0509), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+7
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0510_1x05-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0510 (compatible alternatives: 43650-0511, 43650-0509), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+7
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0515_1x05_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0515 (compatible alternatives: 43650-0516, 43650-0517), 5 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+5
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0521_1x05_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0521 (compatible alternatives: 43650-0522, 43650-0523), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+5
+5
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0524_1x05-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0524 (compatible alternatives: 43650-0525, 43650-0526), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+7
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0600_1x06_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0600 (compatible alternatives: 43650-0601, 43650-0602), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0610_1x06-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0610 (compatible alternatives: 43650-0611, 43650-0609), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0610_1x06-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0610 (compatible alternatives: 43650-0611, 43650-0609), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0615_1x06_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0615 (compatible alternatives: 43650-0616, 43650-0617), 6 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0621_1x06_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0621 (compatible alternatives: 43650-0622, 43650-0623), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+6
+6
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0624_1x06-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0624 (compatible alternatives: 43650-0625, 43650-0626), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0700_1x07_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0700 (compatible alternatives: 43650-0701, 43650-0702), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+7
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0710_1x07-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0710 (compatible alternatives: 43650-0711, 43650-0709), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+9
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0710_1x07-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0710 (compatible alternatives: 43650-0711, 43650-0709), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+9
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0715_1x07_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0715 (compatible alternatives: 43650-0716, 43650-0717), 7 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+7
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0721_1x07_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0721 (compatible alternatives: 43650-0722, 43650-0723), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+7
+7
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0724_1x07-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0724 (compatible alternatives: 43650-0725, 43650-0726), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+9
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0800_1x08_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0800 (compatible alternatives: 43650-0801, 43650-0802), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0810_1x08-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0810 (compatible alternatives: 43650-0811, 43650-0809), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0810_1x08-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0810 (compatible alternatives: 43650-0811, 43650-0809), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0815_1x08_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0815 (compatible alternatives: 43650-0816, 43650-0817), 8 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0821_1x08_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0821 (compatible alternatives: 43650-0822, 43650-0823), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+8
+8
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0824_1x08-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0824 (compatible alternatives: 43650-0825, 43650-0826), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0900_1x09_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0900 (compatible alternatives: 43650-0901, 43650-0902), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+9
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0910_1x09-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-0910 (compatible alternatives: 43650-0911, 43650-0909), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+11
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0910_1x09-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-0910 (compatible alternatives: 43650-0911, 43650-0909), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+11
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0915_1x09_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0915 (compatible alternatives: 43650-0916, 43650-0917), 9 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+9
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0921_1x09_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0921 (compatible alternatives: 43650-0922, 43650-0923), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+9
+9
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-0924_1x09-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-0924 (compatible alternatives: 43650-0925, 43650-0926), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+11
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1000_1x10_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1000 (compatible alternatives: 43650-1001, 43650-1002), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1010_1x10-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1010 (compatible alternatives: 43650-1011, 43650-1009), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1010_1x10-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-1010 (compatible alternatives: 43650-1011, 43650-1009), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1015_1x10_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1015 (compatible alternatives: 43650-1016, 43650-1017), 10 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1021_1x10_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1021 (compatible alternatives: 43650-1022, 43650-1023), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+10
+10
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1024_1x10-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1024 (compatible alternatives: 43650-1025, 43650-1026), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1100_1x11_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1100 (compatible alternatives: 43650-1101, 43650-1102), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+11
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1110_1x11-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1110 (compatible alternatives: 43650-1111, 43650-1109), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+13
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1110_1x11-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-1110 (compatible alternatives: 43650-1111, 43650-1109), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+13
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1115_1x11_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1115 (compatible alternatives: 43650-1116, 43650-1117), 11 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+11
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1121_1x11_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1121 (compatible alternatives: 43650-1122, 43650-1123), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+11
+11
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1124_1x11-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1124 (compatible alternatives: 43650-1125, 43650-1126), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+13
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1200_1x12_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1200 (compatible alternatives: 43650-1201, 43650-1202), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1210_1x12-1MP_P3.00mm_Horizontal
+Molex Micro-Fit 3.0 Connector System, 43650-1210 (compatible alternatives: 43650-1211, 43650-1209), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+14
+13
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1210_1x12-1MP_P3.00mm_Horizontal_PnP
+Molex Micro-Fit 3.0 Connector System, 43650-1210 (compatible alternatives: 43650-1211, 43650-1209), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 horizontal
+0
+14
+13
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1215_1x12_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1215 (compatible alternatives: 43650-1216, 43650-1217), 12 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1221_1x12_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1221 (compatible alternatives: 43650-1222, 43650-1223), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Fit_3.0_43650-1224_1x12-1MP_P3.00mm_Vertical
+Molex Micro-Fit 3.0 Connector System, 43650-1224 (compatible alternatives: 43650-1225, 43650-1226), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Fit_3.0 vertical
+0
+14
+13
+Connector_Molex
+Molex_Micro-Latch_53253-0270_1x02_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0270 (compatible alternatives: 53253-0250), 2 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+2
+2
+Connector_Molex
+Molex_Micro-Latch_53253-0370_1x03_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0370 (compatible alternatives: 53253-0350), 3 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+3
+3
+Connector_Molex
+Molex_Micro-Latch_53253-0470_1x04_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0470 (compatible alternatives: 53253-0450), 4 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+4
+4
+Connector_Molex
+Molex_Micro-Latch_53253-0570_1x05_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0570 (compatible alternatives: 53253-0550), 5 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+5
+5
+Connector_Molex
+Molex_Micro-Latch_53253-0670_1x06_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0670 (compatible alternatives: 53253-0650), 6 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+6
+6
+Connector_Molex
+Molex_Micro-Latch_53253-0770_1x07_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0770 (compatible alternatives: 53253-0750), 7 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+7
+7
+Connector_Molex
+Molex_Micro-Latch_53253-0870_1x08_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0870 (compatible alternatives: 53253-0850), 8 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+8
+8
+Connector_Molex
+Molex_Micro-Latch_53253-0970_1x09_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-0970 (compatible alternatives: 53253-0950), 9 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+9
+9
+Connector_Molex
+Molex_Micro-Latch_53253-1070_1x10_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1070 (compatible alternatives: 53253-1050), 10 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+10
+10
+Connector_Molex
+Molex_Micro-Latch_53253-1170_1x11_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1170 (compatible alternatives: 53253-1150), 11 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+11
+11
+Connector_Molex
+Molex_Micro-Latch_53253-1270_1x12_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1270 (compatible alternatives: 53253-1250), 12 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+12
+12
+Connector_Molex
+Molex_Micro-Latch_53253-1370_1x13_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1370 (compatible alternatives: 53253-1350), 13 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+13
+13
+Connector_Molex
+Molex_Micro-Latch_53253-1470_1x14_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1470 (compatible alternatives: 53253-1450), 14 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+14
+14
+Connector_Molex
+Molex_Micro-Latch_53253-1570_1x15_P2.00mm_Vertical
+Molex Micro-Latch Wire-to-Board Connector System, 53253-1570 (compatible alternatives: 53253-1550), 15 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch vertical
+0
+15
+15
+Connector_Molex
+Molex_Micro-Latch_53254-0270_1x02_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0270 (compatible alternatives: 53254-0250), 2 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+2
+2
+Connector_Molex
+Molex_Micro-Latch_53254-0370_1x03_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0370 (compatible alternatives: 53254-0350), 3 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+3
+3
+Connector_Molex
+Molex_Micro-Latch_53254-0470_1x04_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0470 (compatible alternatives: 53254-0450), 4 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+4
+4
+Connector_Molex
+Molex_Micro-Latch_53254-0570_1x05_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0570 (compatible alternatives: 53254-0550), 5 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+5
+5
+Connector_Molex
+Molex_Micro-Latch_53254-0670_1x06_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0670 (compatible alternatives: 53254-0650), 6 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+6
+6
+Connector_Molex
+Molex_Micro-Latch_53254-0770_1x07_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0770 (compatible alternatives: 53254-0750), 7 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+7
+7
+Connector_Molex
+Molex_Micro-Latch_53254-0870_1x08_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0870 (compatible alternatives: 53254-0850), 8 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+8
+8
+Connector_Molex
+Molex_Micro-Latch_53254-0970_1x09_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-0970 (compatible alternatives: 53254-0950), 9 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+9
+9
+Connector_Molex
+Molex_Micro-Latch_53254-1070_1x10_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1070 (compatible alternatives: 53254-1050), 10 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+10
+10
+Connector_Molex
+Molex_Micro-Latch_53254-1170_1x11_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1170 (compatible alternatives: 53254-1150), 11 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+11
+11
+Connector_Molex
+Molex_Micro-Latch_53254-1270_1x12_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1270 (compatible alternatives: 53254-1250), 12 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+12
+12
+Connector_Molex
+Molex_Micro-Latch_53254-1370_1x13_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1370 (compatible alternatives: 53254-1350), 13 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+13
+13
+Connector_Molex
+Molex_Micro-Latch_53254-1470_1x14_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1470 (compatible alternatives: 53254-1450), 14 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+14
+14
+Connector_Molex
+Molex_Micro-Latch_53254-1570_1x15_P2.00mm_Horizontal
+Molex Micro-Latch Wire-to-Board Connector System, 53254-1570 (compatible alternatives: 53254-1550), 15 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator
+connector Molex Micro-Latch horizontal
+0
+15
+15
+Connector_Molex
+Molex_MicroClasp_55932-0210_1x02_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0210, with PCB locator, 2 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+2
+2
+Connector_Molex
+Molex_MicroClasp_55932-0230_1x02_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0230, 2 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+2
+2
+Connector_Molex
+Molex_MicroClasp_55932-0310_1x03_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0310, with PCB locator, 3 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+3
+3
+Connector_Molex
+Molex_MicroClasp_55932-0330_1x03_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0330, 3 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+3
+3
+Connector_Molex
+Molex_MicroClasp_55932-0410_1x04_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0410, with PCB locator, 4 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+4
+4
+Connector_Molex
+Molex_MicroClasp_55932-0430_1x04_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0430, 4 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+4
+4
+Connector_Molex
+Molex_MicroClasp_55932-0510_1x05_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0510, with PCB locator, 5 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+5
+5
+Connector_Molex
+Molex_MicroClasp_55932-0530_1x05_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0530, 5 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+5
+5
+Connector_Molex
+Molex_MicroClasp_55932-0610_1x06_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0610, with PCB locator, 6 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+6
+6
+Connector_Molex
+Molex_MicroClasp_55932-0630_1x06_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0630, 6 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+6
+6
+Connector_Molex
+Molex_MicroClasp_55932-0710_1x07_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0710, with PCB locator, 7 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+7
+7
+Connector_Molex
+Molex_MicroClasp_55932-0730_1x07_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0730, 7 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+7
+7
+Connector_Molex
+Molex_MicroClasp_55932-0810_1x08_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0810, with PCB locator, 8 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+8
+8
+Connector_Molex
+Molex_MicroClasp_55932-0830_1x08_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0830, 8 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+8
+8
+Connector_Molex
+Molex_MicroClasp_55932-0910_1x09_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0910, with PCB locator, 9 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+9
+9
+Connector_Molex
+Molex_MicroClasp_55932-0930_1x09_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-0930, 9 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+9
+9
+Connector_Molex
+Molex_MicroClasp_55932-1010_1x10_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1010, with PCB locator, 10 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+10
+10
+Connector_Molex
+Molex_MicroClasp_55932-1030_1x10_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1030, 10 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+10
+10
+Connector_Molex
+Molex_MicroClasp_55932-1110_1x11_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1110, with PCB locator, 11 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+11
+11
+Connector_Molex
+Molex_MicroClasp_55932-1130_1x11_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1130, 11 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+11
+11
+Connector_Molex
+Molex_MicroClasp_55932-1210_1x12_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1210, with PCB locator, 12 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+12
+12
+Connector_Molex
+Molex_MicroClasp_55932-1230_1x12_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1230, 12 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+12
+12
+Connector_Molex
+Molex_MicroClasp_55932-1310_1x13_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1310, with PCB locator, 13 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+13
+13
+Connector_Molex
+Molex_MicroClasp_55932-1330_1x13_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1330, 13 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+13
+13
+Connector_Molex
+Molex_MicroClasp_55932-1410_1x14_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1410, with PCB locator, 14 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+14
+14
+Connector_Molex
+Molex_MicroClasp_55932-1430_1x14_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1430, 14 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+14
+14
+Connector_Molex
+Molex_MicroClasp_55932-1510_1x15_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1510, with PCB locator, 15 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+15
+15
+Connector_Molex
+Molex_MicroClasp_55932-1530_1x15_P2.00mm_Vertical
+Molex MicroClasp Wire-to-Board System, 55932-1530, 15 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp vertical
+0
+15
+15
+Connector_Molex
+Molex_MicroClasp_55935-0210_1x02_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0210, with PCB locator, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+2
+2
+Connector_Molex
+Molex_MicroClasp_55935-0230_1x02_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0230, 2 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+2
+2
+Connector_Molex
+Molex_MicroClasp_55935-0310_1x03_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0310, with PCB locator, 3 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+3
+3
+Connector_Molex
+Molex_MicroClasp_55935-0330_1x03_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0330, 3 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+3
+3
+Connector_Molex
+Molex_MicroClasp_55935-0410_1x04_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0410, with PCB locator, 4 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+4
+4
+Connector_Molex
+Molex_MicroClasp_55935-0430_1x04_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0430, 4 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+4
+4
+Connector_Molex
+Molex_MicroClasp_55935-0510_1x05_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0510, with PCB locator, 5 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+5
+5
+Connector_Molex
+Molex_MicroClasp_55935-0530_1x05_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0530, 5 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+5
+5
+Connector_Molex
+Molex_MicroClasp_55935-0610_1x06_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0610, with PCB locator, 6 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+6
+6
+Connector_Molex
+Molex_MicroClasp_55935-0630_1x06_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0630, 6 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+6
+6
+Connector_Molex
+Molex_MicroClasp_55935-0710_1x07_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0710, with PCB locator, 7 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+7
+7
+Connector_Molex
+Molex_MicroClasp_55935-0730_1x07_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0730, 7 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+7
+7
+Connector_Molex
+Molex_MicroClasp_55935-0810_1x08_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0810, with PCB locator, 8 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+8
+8
+Connector_Molex
+Molex_MicroClasp_55935-0830_1x08_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0830, 8 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+8
+8
+Connector_Molex
+Molex_MicroClasp_55935-0910_1x09_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0910, with PCB locator, 9 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+9
+9
+Connector_Molex
+Molex_MicroClasp_55935-0930_1x09_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-0930, 9 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+9
+9
+Connector_Molex
+Molex_MicroClasp_55935-1010_1x10_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1010, with PCB locator, 10 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+10
+10
+Connector_Molex
+Molex_MicroClasp_55935-1030_1x10_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1030, 10 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+10
+10
+Connector_Molex
+Molex_MicroClasp_55935-1110_1x11_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1110, with PCB locator, 11 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+11
+11
+Connector_Molex
+Molex_MicroClasp_55935-1130_1x11_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1130, 11 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+11
+11
+Connector_Molex
+Molex_MicroClasp_55935-1210_1x12_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1210, with PCB locator, 12 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+12
+12
+Connector_Molex
+Molex_MicroClasp_55935-1230_1x12_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1230, 12 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+12
+12
+Connector_Molex
+Molex_MicroClasp_55935-1310_1x13_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1310, with PCB locator, 13 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+13
+13
+Connector_Molex
+Molex_MicroClasp_55935-1330_1x13_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1330, 13 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+13
+13
+Connector_Molex
+Molex_MicroClasp_55935-1410_1x14_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1410, with PCB locator, 14 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+14
+14
+Connector_Molex
+Molex_MicroClasp_55935-1430_1x14_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1430, 14 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+14
+14
+Connector_Molex
+Molex_MicroClasp_55935-1510_1x15_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1510, with PCB locator, 15 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+15
+15
+Connector_Molex
+Molex_MicroClasp_55935-1530_1x15_P2.00mm_Horizontal
+Molex MicroClasp Wire-to-Board System, 55935-1530, 15 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator
+connector Molex MicroClasp horizontal
+0
+15
+15
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-02A2_2x01_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-02A2, example for new mpn: 39-28-902x, 1 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+2
+2
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-02A, example for new mpn: 39-28-x02x, 1 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+2
+2
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-04A2_2x02_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-04A2, example for new mpn: 39-28-904x, 2 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+4
+4
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-04A, example for new mpn: 39-28-x04x, 2 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+4
+4
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-06A2_2x03_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-06A2, example for new mpn: 39-28-906x, 3 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+6
+6
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-06A, example for new mpn: 39-28-x06x, 3 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+6
+6
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-08A2_2x04_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-08A2, example for new mpn: 39-28-908x, 4 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+8
+8
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-08A, example for new mpn: 39-28-x08x, 4 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+8
+8
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-10A2_2x05_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-10A2, example for new mpn: 39-28-910x, 5 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+10
+10
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-10A_2x05_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-10A, example for new mpn: 39-28-x10x, 5 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+10
+10
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-12A2_2x06_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-12A2, example for new mpn: 39-28-912x, 6 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+12
+12
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-12A_2x06_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-12A, example for new mpn: 39-28-x12x, 6 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+12
+12
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-14A2_2x07_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-14A2, example for new mpn: 39-28-914x, 7 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+14
+14
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-14A_2x07_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-14A, example for new mpn: 39-28-x14x, 7 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+14
+14
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-16A2_2x08_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-16A2, example for new mpn: 39-28-916x, 8 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+16
+16
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-16A_2x08_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-16A, example for new mpn: 39-28-x16x, 8 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+16
+16
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-18A2_2x09_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-18A2, example for new mpn: 39-28-918x, 9 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+18
+18
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-18A_2x09_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-18A, example for new mpn: 39-28-x18x, 9 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+18
+18
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-20A2_2x10_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-20A2, example for new mpn: 39-28-920x, 10 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+20
+20
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-20A_2x10_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-20A, example for new mpn: 39-28-x20x, 10 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+20
+20
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-22A2_2x11_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-22A2, example for new mpn: 39-28-922x, 11 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+22
+22
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-22A_2x11_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-22A, example for new mpn: 39-28-x22x, 11 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+22
+22
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-24A2, example for new mpn: 39-28-924x, 12 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr verticalplastic_peg
+0
+24
+24
+Connector_Molex
+Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-24A, example for new mpn: 39-28-x24x, 12 Pins per row, Mounting:  (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr vertical
+0
+24
+24
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-02A1_2x01_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-02A1, example for new mpn: 39-29-4029, 1 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+2
+2
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-02A2, example for new mpn: 39-30-0020, 1 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+2
+2
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-04A1_2x02_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-04A1, example for new mpn: 39-29-4049, 2 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+4
+4
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-04A2_2x02_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-04A2, example for new mpn: 39-30-0040, 2 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+4
+4
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-06A1_2x03_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-06A1, example for new mpn: 39-29-4069, 3 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+6
+6
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-06A2_2x03_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-06A2, example for new mpn: 39-30-0060, 3 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+6
+6
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-08A1_2x04_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-08A1, example for new mpn: 39-29-4089, 4 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+8
+8
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-08A2_2x04_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-08A2, example for new mpn: 39-30-0080, 4 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+8
+8
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-10A1_2x05_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-10A1, example for new mpn: 39-29-4109, 5 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+10
+10
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-10A2_2x05_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-10A2, example for new mpn: 39-30-0100, 5 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+10
+10
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-12A1_2x06_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-12A1, example for new mpn: 39-29-4129, 6 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+12
+12
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-12A2_2x06_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-12A2, example for new mpn: 39-30-0120, 6 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+12
+12
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-14A1_2x07_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-14A1, example for new mpn: 39-29-4149, 7 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+14
+14
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-14A2_2x07_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-14A2, example for new mpn: 39-30-0140, 7 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+14
+14
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-16A1_2x08_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-16A1, example for new mpn: 39-29-4169, 8 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+16
+16
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-16A2_2x08_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-16A2, example for new mpn: 39-30-0160, 8 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+16
+16
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-18A1_2x09_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-18A1, example for new mpn: 39-29-4189, 9 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+18
+18
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-18A2_2x09_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-18A2, example for new mpn: 39-30-0180, 9 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+18
+18
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-20A1_2x10_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-20A1, example for new mpn: 39-29-4209, 10 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+20
+20
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-20A2_2x10_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-20A2, example for new mpn: 39-30-0200, 10 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+20
+20
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-22A1_2x11_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-22A1, example for new mpn: 39-29-4229, 11 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+22
+22
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-22A2_2x11_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-22A2, example for new mpn: 39-30-0220, 11 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+22
+22
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-24A1_2x12_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-24A1, example for new mpn: 39-29-4249, 12 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalscrew_flange
+0
+24
+24
+Connector_Molex
+Molex_Mini-Fit_Jr_5569-24A2_2x12_P4.20mm_Horizontal
+Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-24A2, example for new mpn: 39-30-0240, 12 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Jr horizontalplastic_peg
+0
+24
+24
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-22XX_1x02_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 42819-22XX, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+6
+2
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-22XX_1x02_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42819-22XX, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+32
+2
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-32XX_1x03_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 42819-32XX, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+8
+3
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-32XX_1x03_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42819-32XX, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+47
+3
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-42XX_1x04_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 42819-42XX, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+10
+4
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-42XX_1x04_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42819-42XX, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+62
+4
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-52XX_1x05_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 42819-52XX, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+12
+5
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-52XX_1x05_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42819-52XX, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+77
+5
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-62XX_1x06_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 42819-62XX, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+14
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_42819-62XX_1x06_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42819-62XX, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+92
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-22XX_1x02_P10.00mm_Horizontal
+Molex Mini-Fit Sr. Power Connectors, 42820-22XX, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+6
+2
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-22XX_1x02_P10.00mm_Horizontal_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42820-22XX, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+32
+2
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-32XX_1x03_P10.00mm_Horizontal
+Molex Mini-Fit Sr. Power Connectors, 42820-32XX, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+8
+3
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-32XX_1x03_P10.00mm_Horizontal_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42820-32XX, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+47
+3
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-42XX_1x04_P10.00mm_Horizontal
+Molex Mini-Fit Sr. Power Connectors, 42820-42XX, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+10
+4
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-42XX_1x04_P10.00mm_Horizontal_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42820-42XX, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+62
+4
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-52XX_1x05_P10.00mm_Horizontal
+Molex Mini-Fit Sr. Power Connectors, 42820-52XX, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+12
+5
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-52XX_1x05_P10.00mm_Horizontal_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42820-52XX, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+77
+5
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-62XX_1x06_P10.00mm_Horizontal
+Molex Mini-Fit Sr. Power Connectors, 42820-62XX, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+14
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_42820-62XX_1x06_P10.00mm_Horizontal_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 42820-62XX, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr horizontal
+0
+92
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx06_2x03_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 43915-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+14
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx06_2x03_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 43915-xx06, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+92
+6
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx08_2x04_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 43915-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+18
+8
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx08_2x04_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 43915-xx08, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+122
+8
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx10_2x05_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 43915-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+22
+10
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx10_2x05_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 43915-xx10, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+152
+10
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx12_2x06_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 43915-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+26
+12
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx12_2x06_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 43915-xx12, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+182
+12
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx14_2x07_P10.00mm_Vertical
+Molex Mini-Fit Sr. Power Connectors, 43915-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+30
+14
+Connector_Molex
+Molex_Mini-Fit_Sr_43915-xx14_2x07_P10.00mm_Vertical_ThermalVias
+Molex Mini-Fit Sr. Power Connectors, 43915-xx14, With thermal vias in pads, 7 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator
+connector Molex Mini-Fit_Sr vertical
+0
+212
+14
+Connector_Molex
+Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx02, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+2
+2
+Connector_Molex
+Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx03, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+3
+3
+Connector_Molex
+Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx04, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+4
+4
+Connector_Molex
+Molex_Nano-Fit_105309-xx05_1x05_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx05, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+5
+5
+Connector_Molex
+Molex_Nano-Fit_105309-xx06_1x06_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx06, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+6
+6
+Connector_Molex
+Molex_Nano-Fit_105309-xx07_1x07_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx07, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+7
+7
+Connector_Molex
+Molex_Nano-Fit_105309-xx08_1x08_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105309-xx08, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+8
+8
+Connector_Molex
+Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx04, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+4
+4
+Connector_Molex
+Molex_Nano-Fit_105310-xx06_2x03_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+6
+6
+Connector_Molex
+Molex_Nano-Fit_105310-xx08_2x04_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+8
+8
+Connector_Molex
+Molex_Nano-Fit_105310-xx10_2x05_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+10
+10
+Connector_Molex
+Molex_Nano-Fit_105310-xx12_2x06_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+12
+12
+Connector_Molex
+Molex_Nano-Fit_105310-xx14_2x07_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+14
+14
+Connector_Molex
+Molex_Nano-Fit_105310-xx16_2x08_P2.50mm_Vertical
+Molex Nano-Fit Power Connectors, 105310-xx16, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit vertical
+0
+16
+16
+Connector_Molex
+Molex_Nano-Fit_105313-xx02_1x02_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx02, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+2
+2
+Connector_Molex
+Molex_Nano-Fit_105313-xx03_1x03_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx03, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+3
+3
+Connector_Molex
+Molex_Nano-Fit_105313-xx04_1x04_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx04, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+4
+4
+Connector_Molex
+Molex_Nano-Fit_105313-xx05_1x05_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx05, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+5
+5
+Connector_Molex
+Molex_Nano-Fit_105313-xx06_1x06_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx06, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+6
+6
+Connector_Molex
+Molex_Nano-Fit_105313-xx07_1x07_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx07, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+7
+7
+Connector_Molex
+Molex_Nano-Fit_105313-xx08_1x08_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105313-xx08, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+8
+8
+Connector_Molex
+Molex_Nano-Fit_105314-xx04_2x02_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx04, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+4
+4
+Connector_Molex
+Molex_Nano-Fit_105314-xx06_2x03_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+6
+6
+Connector_Molex
+Molex_Nano-Fit_105314-xx08_2x04_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+8
+8
+Connector_Molex
+Molex_Nano-Fit_105314-xx10_2x05_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+10
+10
+Connector_Molex
+Molex_Nano-Fit_105314-xx12_2x06_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+12
+12
+Connector_Molex
+Molex_Nano-Fit_105314-xx14_2x07_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+14
+14
+Connector_Molex
+Molex_Nano-Fit_105314-xx16_2x08_P2.50mm_Horizontal
+Molex Nano-Fit Power Connectors, 105314-xx16, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator
+connector Molex Nano-Fit horizontal
+0
+16
+16
+Connector_Molex
+Molex_Panelmate_53780-0270_1x02-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0270 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+4
+3
+Connector_Molex
+Molex_Panelmate_53780-0370_1x03-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0370 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+5
+4
+Connector_Molex
+Molex_Panelmate_53780-0470_1x04-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0470 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+6
+5
+Connector_Molex
+Molex_Panelmate_53780-0570_1x05-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0570 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+7
+6
+Connector_Molex
+Molex_Panelmate_53780-0670_1x06-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0670 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+8
+7
+Connector_Molex
+Molex_Panelmate_53780-0770_1x07-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0770 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+9
+8
+Connector_Molex
+Molex_Panelmate_53780-0870_1x08-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0870 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+10
+9
+Connector_Molex
+Molex_Panelmate_53780-0970_1x09-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-0970 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+11
+10
+Connector_Molex
+Molex_Panelmate_53780-1070_1x10-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-1070 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+12
+11
+Connector_Molex
+Molex_Panelmate_53780-1270_1x12-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-1270 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+14
+13
+Connector_Molex
+Molex_Panelmate_53780-1470_1x14-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-1470 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+16
+15
+Connector_Molex
+Molex_Panelmate_53780-1570_1x15-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-1570 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+17
+16
+Connector_Molex
+Molex_Panelmate_53780-1870_1x18-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-1870 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+20
+19
+Connector_Molex
+Molex_Panelmate_53780-3070_1x30-1MP_P1.25mm_Horizontal
+Molex Panelmate series connector, 53780-3070 (), generated with kicad-footprint-generator
+connector Molex Panelmate horizontal
+0
+32
+31
+Connector_Molex
+Molex_Pico-Clasp_202396-0207_1x02-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0207 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+4
+3
+Connector_Molex
+Molex_Pico-Clasp_202396-0307_1x03-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0307 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+5
+4
+Connector_Molex
+Molex_Pico-Clasp_202396-0407_1x04-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0407 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+6
+5
+Connector_Molex
+Molex_Pico-Clasp_202396-0507_1x05-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0507 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+7
+6
+Connector_Molex
+Molex_Pico-Clasp_202396-0607_1x06-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0607 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+8
+7
+Connector_Molex
+Molex_Pico-Clasp_202396-0707_1x07-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0707 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+9
+8
+Connector_Molex
+Molex_Pico-Clasp_202396-0807_1x08-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0807 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+10
+9
+Connector_Molex
+Molex_Pico-Clasp_202396-0907_1x09-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-0907 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+11
+10
+Connector_Molex
+Molex_Pico-Clasp_202396-1007_1x10-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1007 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+12
+11
+Connector_Molex
+Molex_Pico-Clasp_202396-1107_1x11-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1107 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+13
+12
+Connector_Molex
+Molex_Pico-Clasp_202396-1207_1x12-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1207 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+14
+13
+Connector_Molex
+Molex_Pico-Clasp_202396-1307_1x13-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1307 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+15
+14
+Connector_Molex
+Molex_Pico-Clasp_202396-1407_1x14-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1407 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+16
+15
+Connector_Molex
+Molex_Pico-Clasp_202396-1507_1x15-1MP_P1.00mm_Horizontal
+Molex Pico-Clasp series connector, 202396-1507 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp horizontal
+0
+17
+16
+Connector_Molex
+Molex_Pico-Clasp_501331-0207_1x02-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0207 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+4
+3
+Connector_Molex
+Molex_Pico-Clasp_501331-0307_1x03-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0307 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+5
+4
+Connector_Molex
+Molex_Pico-Clasp_501331-0407_1x04-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0407 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+6
+5
+Connector_Molex
+Molex_Pico-Clasp_501331-0507_1x05-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0507 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+7
+6
+Connector_Molex
+Molex_Pico-Clasp_501331-0607_1x06-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0607 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+8
+7
+Connector_Molex
+Molex_Pico-Clasp_501331-0707_1x07-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0707 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+9
+8
+Connector_Molex
+Molex_Pico-Clasp_501331-0807_1x08-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0807 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+10
+9
+Connector_Molex
+Molex_Pico-Clasp_501331-0907_1x09-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-0907 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+11
+10
+Connector_Molex
+Molex_Pico-Clasp_501331-1007_1x10-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1007 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+12
+11
+Connector_Molex
+Molex_Pico-Clasp_501331-1107_1x11-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1107 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+13
+12
+Connector_Molex
+Molex_Pico-Clasp_501331-1207_1x12-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1207 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+14
+13
+Connector_Molex
+Molex_Pico-Clasp_501331-1307_1x13-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1307 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+15
+14
+Connector_Molex
+Molex_Pico-Clasp_501331-1407_1x14-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1407 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+16
+15
+Connector_Molex
+Molex_Pico-Clasp_501331-1507_1x15-1MP_P1.00mm_Vertical
+Molex Pico-Clasp series connector, 501331-1507 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Clasp vertical
+0
+17
+16
+Connector_Molex
+Molex_Pico-EZmate_78171-0002_1x02-1MP_P1.20mm_Vertical
+Molex Pico-EZmate series connector, 78171-0002 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-EZmate vertical
+0
+4
+3
+Connector_Molex
+Molex_Pico-EZmate_78171-0003_1x03-1MP_P1.20mm_Vertical
+Molex Pico-EZmate series connector, 78171-0003 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-EZmate vertical
+0
+5
+4
+Connector_Molex
+Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical
+Molex Pico-EZmate series connector, 78171-0004 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-EZmate vertical
+0
+6
+5
+Connector_Molex
+Molex_Pico-EZmate_78171-0005_1x05-1MP_P1.20mm_Vertical
+Molex Pico-EZmate series connector, 78171-0005 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-EZmate vertical
+0
+7
+6
+Connector_Molex
+Molex_Pico-EZmate_Slim_202656-0021_1x02-1MP_P1.20mm_Vertical
+Molex Pico-EZmate_Slim series connector, 202656-0021 (http://www.molex.com/pdm_docs/sd/2026560021_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-EZmate_Slim vertical
+0
+4
+3
+Connector_Molex
+Molex_Pico-Lock_205338-0002_1x02-1MP_P2.00mm_Horizontal
+Molex Pico-Lock series connector, 205338-0002 (https://www.molex.com/pdm_docs/sd/2053380002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+4
+3
+Connector_Molex
+Molex_Pico-Lock_205338-0004_1x04-1MP_P2.00mm_Horizontal
+Molex Pico-Lock series connector, 205338-0004 (https://www.molex.com/pdm_docs/sd/2053380002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+6
+5
+Connector_Molex
+Molex_Pico-Lock_205338-0006_1x06-1MP_P2.00mm_Horizontal
+Molex Pico-Lock series connector, 205338-0006 (https://www.molex.com/pdm_docs/sd/2053380002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+8
+7
+Connector_Molex
+Molex_Pico-Lock_205338-0008_1x08-1MP_P2.00mm_Horizontal
+Molex Pico-Lock series connector, 205338-0008 (https://www.molex.com/pdm_docs/sd/2053380002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+10
+9
+Connector_Molex
+Molex_Pico-Lock_205338-0010_1x10-1MP_P2.00mm_Horizontal
+Molex Pico-Lock series connector, 205338-0010 (https://www.molex.com/pdm_docs/sd/2053380002_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+12
+11
+Connector_Molex
+Molex_Pico-Lock_504050-0291_1x02-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0291 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+4
+3
+Connector_Molex
+Molex_Pico-Lock_504050-0391_1x03-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0391 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+5
+4
+Connector_Molex
+Molex_Pico-Lock_504050-0491_1x04-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0491 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+6
+5
+Connector_Molex
+Molex_Pico-Lock_504050-0591_1x05-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0591 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+7
+6
+Connector_Molex
+Molex_Pico-Lock_504050-0691_1x06-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0691 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+8
+7
+Connector_Molex
+Molex_Pico-Lock_504050-0791_1x07-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0791 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+9
+8
+Connector_Molex
+Molex_Pico-Lock_504050-0891_1x08-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0891 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+10
+9
+Connector_Molex
+Molex_Pico-Lock_504050-0991_1x09-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-0991 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+11
+10
+Connector_Molex
+Molex_Pico-Lock_504050-1091_1x10-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-1091 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+12
+11
+Connector_Molex
+Molex_Pico-Lock_504050-1191_1x11-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-1191 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+13
+12
+Connector_Molex
+Molex_Pico-Lock_504050-1291_1x12-1MP_P1.50mm_Horizontal
+Molex Pico-Lock series connector, 504050-1291 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator
+connector Molex Pico-Lock horizontal
+0
+14
+13
+Connector_Molex
+Molex_Pico-SPOX_87437-1443_1x14-P1.5mm_Vertical
+Molex Pico-SPOX Connector System, 87437-1443, 14 Pins per row (https://www.molex.com/pdm_docs/sd/874371443_sd.pdf#page=2)
+molex pico spox 14
+0
+28
+14
+Connector_Molex
+Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0210, 2 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+2
+2
+Connector_Molex
+Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0310, 3 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+3
+3
+Connector_Molex
+Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0410, 4 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+4
+4
+Connector_Molex
+Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0510, 5 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+5
+5
+Connector_Molex
+Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0610, 6 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+6
+6
+Connector_Molex
+Molex_PicoBlade_53047-0710_1x07_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0710, 7 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+7
+7
+Connector_Molex
+Molex_PicoBlade_53047-0810_1x08_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0810, 8 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+8
+8
+Connector_Molex
+Molex_PicoBlade_53047-0910_1x09_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-0910, 9 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+9
+9
+Connector_Molex
+Molex_PicoBlade_53047-1010_1x10_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1010, 10 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+10
+10
+Connector_Molex
+Molex_PicoBlade_53047-1110_1x11_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1110, 11 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+11
+11
+Connector_Molex
+Molex_PicoBlade_53047-1210_1x12_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1210, 12 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+12
+12
+Connector_Molex
+Molex_PicoBlade_53047-1310_1x13_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1310, 13 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+13
+13
+Connector_Molex
+Molex_PicoBlade_53047-1410_1x14_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1410, 14 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+14
+14
+Connector_Molex
+Molex_PicoBlade_53047-1510_1x15_P1.25mm_Vertical
+Molex PicoBlade Connector System, 53047-1510, 15 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+15
+15
+Connector_Molex
+Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0210, 2 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+2
+2
+Connector_Molex
+Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0310, 3 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+3
+3
+Connector_Molex
+Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0410, 4 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+4
+4
+Connector_Molex
+Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0510, 5 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+5
+5
+Connector_Molex
+Molex_PicoBlade_53048-0610_1x06_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0610, 6 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+6
+6
+Connector_Molex
+Molex_PicoBlade_53048-0710_1x07_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0710, 7 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+7
+7
+Connector_Molex
+Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0810, 8 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+8
+8
+Connector_Molex
+Molex_PicoBlade_53048-0910_1x09_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-0910, 9 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+9
+9
+Connector_Molex
+Molex_PicoBlade_53048-1010_1x10_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1010, 10 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+10
+10
+Connector_Molex
+Molex_PicoBlade_53048-1110_1x11_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1110, 11 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+11
+11
+Connector_Molex
+Molex_PicoBlade_53048-1210_1x12_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1210, 12 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+12
+12
+Connector_Molex
+Molex_PicoBlade_53048-1310_1x13_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1310, 13 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+13
+13
+Connector_Molex
+Molex_PicoBlade_53048-1410_1x14_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1410, 14 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+14
+14
+Connector_Molex
+Molex_PicoBlade_53048-1510_1x15_P1.25mm_Horizontal
+Molex PicoBlade Connector System, 53048-1510, 15 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+15
+15
+Connector_Molex
+Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+4
+3
+Connector_Molex
+Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+5
+4
+Connector_Molex
+Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0471 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+6
+5
+Connector_Molex
+Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0571 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+7
+6
+Connector_Molex
+Molex_PicoBlade_53261-0671_1x06-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0671 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+8
+7
+Connector_Molex
+Molex_PicoBlade_53261-0771_1x07-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0771 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+9
+8
+Connector_Molex
+Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0871 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+10
+9
+Connector_Molex
+Molex_PicoBlade_53261-0971_1x09-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-0971 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+11
+10
+Connector_Molex
+Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1071 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+12
+11
+Connector_Molex
+Molex_PicoBlade_53261-1171_1x11-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1171 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+13
+12
+Connector_Molex
+Molex_PicoBlade_53261-1271_1x12-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+14
+13
+Connector_Molex
+Molex_PicoBlade_53261-1371_1x13-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+15
+14
+Connector_Molex
+Molex_PicoBlade_53261-1471_1x14-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1471 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+16
+15
+Connector_Molex
+Molex_PicoBlade_53261-1571_1x15-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1571 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+17
+16
+Connector_Molex
+Molex_PicoBlade_53261-1771_1x17-1MP_P1.25mm_Horizontal
+Molex PicoBlade series connector, 53261-1771 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade horizontal
+0
+19
+18
+Connector_Molex
+Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0271 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+4
+3
+Connector_Molex
+Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0371 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+5
+4
+Connector_Molex
+Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+6
+5
+Connector_Molex
+Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0571 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+7
+6
+Connector_Molex
+Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0671 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+8
+7
+Connector_Molex
+Molex_PicoBlade_53398-0771_1x07-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0771 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+9
+8
+Connector_Molex
+Molex_PicoBlade_53398-0871_1x08-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0871 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+10
+9
+Connector_Molex
+Molex_PicoBlade_53398-0971_1x09-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-0971 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+11
+10
+Connector_Molex
+Molex_PicoBlade_53398-1071_1x10-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1071 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+12
+11
+Connector_Molex
+Molex_PicoBlade_53398-1171_1x11-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1171 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+13
+12
+Connector_Molex
+Molex_PicoBlade_53398-1271_1x12-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1271 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+14
+13
+Connector_Molex
+Molex_PicoBlade_53398-1371_1x13-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1371 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+15
+14
+Connector_Molex
+Molex_PicoBlade_53398-1471_1x14-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+16
+15
+Connector_Molex
+Molex_PicoBlade_53398-1571_1x15-1MP_P1.25mm_Vertical
+Molex PicoBlade series connector, 53398-1571 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator
+connector Molex PicoBlade vertical
+0
+17
+16
+Connector_Molex
+Molex_Picoflex_90325-0004_2x02_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0004, 4 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+4
+4
+Connector_Molex
+Molex_Picoflex_90325-0006_2x03_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0006, 6 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+6
+6
+Connector_Molex
+Molex_Picoflex_90325-0008_2x04_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0008, 8 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+8
+8
+Connector_Molex
+Molex_Picoflex_90325-0010_2x05_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0010, 10 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+10
+10
+Connector_Molex
+Molex_Picoflex_90325-0012_2x06_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0012, 12 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+12
+12
+Connector_Molex
+Molex_Picoflex_90325-0014_2x07_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0014, 14 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+14
+14
+Connector_Molex
+Molex_Picoflex_90325-0016_2x08_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0016, 16 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+16
+16
+Connector_Molex
+Molex_Picoflex_90325-0018_2x09_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0018, 18 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+18
+18
+Connector_Molex
+Molex_Picoflex_90325-0020_2x10_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0020, 20 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+20
+20
+Connector_Molex
+Molex_Picoflex_90325-0022_2x11_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0022, 22 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+22
+22
+Connector_Molex
+Molex_Picoflex_90325-0024_2x12_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0024, 24 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+24
+24
+Connector_Molex
+Molex_Picoflex_90325-0026_2x13_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90325-0026, 26 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+26
+26
+Connector_Molex
+Molex_Picoflex_90814-0004_2x02_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0004, 4 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+4
+4
+Connector_Molex
+Molex_Picoflex_90814-0006_2x03_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0006, 6 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+6
+6
+Connector_Molex
+Molex_Picoflex_90814-0008_2x04_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0008, 8 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+8
+8
+Connector_Molex
+Molex_Picoflex_90814-0010_2x05_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0010, 10 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+10
+10
+Connector_Molex
+Molex_Picoflex_90814-0012_2x06_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0012, 12 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+12
+12
+Connector_Molex
+Molex_Picoflex_90814-0014_2x07_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0014, 14 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+14
+14
+Connector_Molex
+Molex_Picoflex_90814-0016_2x08_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0016, 16 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+16
+16
+Connector_Molex
+Molex_Picoflex_90814-0018_2x09_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0018, 18 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+18
+18
+Connector_Molex
+Molex_Picoflex_90814-0020_2x10_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0020, 20 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+20
+20
+Connector_Molex
+Molex_Picoflex_90814-0022_2x11_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0022, 22 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+22
+22
+Connector_Molex
+Molex_Picoflex_90814-0024_2x12_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0024, 24 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+24
+24
+Connector_Molex
+Molex_Picoflex_90814-0026_2x13_P1.27mm_Vertical
+Molex Picoflex Ribbon-Cable Connectors, 90814-0026, 26 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator
+connector Molex Picoflex vertical
+0
+26
+26
+Connector_Molex
+Molex_SL_171971-0002_1x02_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0002 (compatible alternatives: 171971-0102, 171971-0202), 2 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+2
+2
+Connector_Molex
+Molex_SL_171971-0003_1x03_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0003 (compatible alternatives: 171971-0103, 171971-0203), 3 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+3
+3
+Connector_Molex
+Molex_SL_171971-0004_1x04_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0004 (compatible alternatives: 171971-0104, 171971-0204), 4 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+4
+4
+Connector_Molex
+Molex_SL_171971-0005_1x05_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0005 (compatible alternatives: 171971-0105, 171971-0205), 5 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+5
+5
+Connector_Molex
+Molex_SL_171971-0006_1x06_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0006 (compatible alternatives: 171971-0106, 171971-0206), 6 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+6
+6
+Connector_Molex
+Molex_SL_171971-0007_1x07_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0007 (compatible alternatives: 171971-0107, 171971-0207), 7 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+7
+7
+Connector_Molex
+Molex_SL_171971-0008_1x08_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0008 (compatible alternatives: 171971-0108, 171971-0208), 8 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+8
+8
+Connector_Molex
+Molex_SL_171971-0009_1x09_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0009 (compatible alternatives: 171971-0109, 171971-0209), 9 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+9
+9
+Connector_Molex
+Molex_SL_171971-0010_1x10_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0010 (compatible alternatives: 171971-0110, 171971-0210), 10 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+10
+10
+Connector_Molex
+Molex_SL_171971-0011_1x11_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0011 (compatible alternatives: 171971-0111, 171971-0211), 11 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+11
+11
+Connector_Molex
+Molex_SL_171971-0012_1x12_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0012 (compatible alternatives: 171971-0112, 171971-0212), 12 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+12
+12
+Connector_Molex
+Molex_SL_171971-0013_1x13_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0013 (compatible alternatives: 171971-0113, 171971-0213), 13 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+13
+13
+Connector_Molex
+Molex_SL_171971-0014_1x14_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0014 (compatible alternatives: 171971-0114, 171971-0214), 14 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+14
+14
+Connector_Molex
+Molex_SL_171971-0015_1x15_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0015 (compatible alternatives: 171971-0115, 171971-0215), 15 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+15
+15
+Connector_Molex
+Molex_SL_171971-0016_1x16_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0016 (compatible alternatives: 171971-0116, 171971-0216), 16 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+16
+16
+Connector_Molex
+Molex_SL_171971-0017_1x17_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0017 (compatible alternatives: 171971-0117, 171971-0217), 17 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+17
+17
+Connector_Molex
+Molex_SL_171971-0018_1x18_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0018 (compatible alternatives: 171971-0118, 171971-0218), 18 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+18
+18
+Connector_Molex
+Molex_SL_171971-0019_1x19_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0019 (compatible alternatives: 171971-0119, 171971-0219), 19 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+19
+19
+Connector_Molex
+Molex_SL_171971-0020_1x20_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0020 (compatible alternatives: 171971-0120, 171971-0220), 20 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+20
+20
+Connector_Molex
+Molex_SL_171971-0021_1x21_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0021 (compatible alternatives: 171971-0121, 171971-0221), 21 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+21
+21
+Connector_Molex
+Molex_SL_171971-0022_1x22_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0022 (compatible alternatives: 171971-0122, 171971-0222), 22 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+22
+22
+Connector_Molex
+Molex_SL_171971-0023_1x23_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0023 (compatible alternatives: 171971-0123, 171971-0223), 23 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+23
+23
+Connector_Molex
+Molex_SL_171971-0024_1x24_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0024 (compatible alternatives: 171971-0124, 171971-0224), 24 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+24
+24
+Connector_Molex
+Molex_SL_171971-0025_1x25_P2.54mm_Vertical
+Molex Stackable Linear Connector, 171971-0025 (compatible alternatives: 171971-0125, 171971-0225), 25 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator
+connector Molex SL vertical
+0
+25
+25
+Connector_Molex
+Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-02A, 2 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+2
+2
+Connector_Molex
+Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-03A, 3 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+3
+3
+Connector_Molex
+Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-04A, 4 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+4
+4
+Connector_Molex
+Molex_SPOX_5267-05A_1x05_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-05A, 5 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+5
+5
+Connector_Molex
+Molex_SPOX_5267-06A_1x06_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-06A, 6 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+6
+6
+Connector_Molex
+Molex_SPOX_5267-07A_1x07_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-07A, 7 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+7
+7
+Connector_Molex
+Molex_SPOX_5267-08A_1x08_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-08A, 8 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+8
+8
+Connector_Molex
+Molex_SPOX_5267-09A_1x09_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-09A, 9 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+9
+9
+Connector_Molex
+Molex_SPOX_5267-10A_1x10_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-10A, 10 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+10
+10
+Connector_Molex
+Molex_SPOX_5267-11A_1x11_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-11A, 11 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+11
+11
+Connector_Molex
+Molex_SPOX_5267-12A_1x12_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-12A, 12 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+12
+12
+Connector_Molex
+Molex_SPOX_5267-13A_1x13_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-13A, 13 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+13
+13
+Connector_Molex
+Molex_SPOX_5267-14A_1x14_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-14A, 14 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+14
+14
+Connector_Molex
+Molex_SPOX_5267-15A_1x15_P2.50mm_Vertical
+Molex SPOX Connector System, 5267-15A, 15 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX vertical
+0
+15
+15
+Connector_Molex
+Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-02A, 2 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+2
+2
+Connector_Molex
+Molex_SPOX_5268-03A_1x03_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-03A, 3 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+3
+3
+Connector_Molex
+Molex_SPOX_5268-04A_1x04_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-04A, 4 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+4
+4
+Connector_Molex
+Molex_SPOX_5268-05A_1x05_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-05A, 5 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+5
+5
+Connector_Molex
+Molex_SPOX_5268-06A_1x06_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-06A, 6 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+6
+6
+Connector_Molex
+Molex_SPOX_5268-07A_1x07_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-07A, 7 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+7
+7
+Connector_Molex
+Molex_SPOX_5268-08A_1x08_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-08A, 8 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+8
+8
+Connector_Molex
+Molex_SPOX_5268-09A_1x09_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-09A, 9 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+9
+9
+Connector_Molex
+Molex_SPOX_5268-10A_1x10_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-10A, 10 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+10
+10
+Connector_Molex
+Molex_SPOX_5268-11A_1x11_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-11A, 11 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+11
+11
+Connector_Molex
+Molex_SPOX_5268-12A_1x12_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-12A, 12 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+12
+12
+Connector_Molex
+Molex_SPOX_5268-13A_1x13_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-13A, 13 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+13
+13
+Connector_Molex
+Molex_SPOX_5268-14A_1x14_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-14A, 14 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+14
+14
+Connector_Molex
+Molex_SPOX_5268-15A_1x15_P2.50mm_Horizontal
+Molex SPOX Connector System, 5268-15A, 15 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator
+connector Molex SPOX horizontal
+0
+15
+15
+Connector_Molex
+Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-0102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+4
+2
+Connector_Molex
+Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-0102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+30
+2
+Connector_Molex
+Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-0103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+6
+3
+Connector_Molex
+Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-0103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+45
+3
+Connector_Molex
+Molex_Sabre_43160-0104_1x04_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-0104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+8
+4
+Connector_Molex
+Molex_Sabre_43160-0104_1x04_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-0104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+60
+4
+Connector_Molex
+Molex_Sabre_43160-0105_1x05_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-0105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+10
+5
+Connector_Molex
+Molex_Sabre_43160-0105_1x05_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-0105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+75
+5
+Connector_Molex
+Molex_Sabre_43160-0106_1x06_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-0106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+12
+6
+Connector_Molex
+Molex_Sabre_43160-0106_1x06_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-0106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+90
+6
+Connector_Molex
+Molex_Sabre_43160-1102_1x02_P7.49mm_Horizontal
+Molex Sabre Power Connector, 43160-1102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+6
+2
+Connector_Molex
+Molex_Sabre_43160-1102_1x02_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 43160-1102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+32
+2
+Connector_Molex
+Molex_Sabre_43160-1103_1x03_P7.49mm_Horizontal
+Molex Sabre Power Connector, 43160-1103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+8
+3
+Connector_Molex
+Molex_Sabre_43160-1103_1x03_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 43160-1103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+47
+3
+Connector_Molex
+Molex_Sabre_43160-1104_1x04_P7.49mm_Horizontal
+Molex Sabre Power Connector, 43160-1104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+10
+4
+Connector_Molex
+Molex_Sabre_43160-1104_1x04_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 43160-1104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+62
+4
+Connector_Molex
+Molex_Sabre_43160-1105_1x05_P7.49mm_Horizontal
+Molex Sabre Power Connector, 43160-1105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+12
+5
+Connector_Molex
+Molex_Sabre_43160-1105_1x05_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 43160-1105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+77
+5
+Connector_Molex
+Molex_Sabre_43160-1106_1x06_P7.49mm_Horizontal
+Molex Sabre Power Connector, 43160-1106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+14
+6
+Connector_Molex
+Molex_Sabre_43160-1106_1x06_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 43160-1106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+92
+6
+Connector_Molex
+Molex_Sabre_43160-2102_1x02_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-2102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+6
+2
+Connector_Molex
+Molex_Sabre_43160-2102_1x02_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-2102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+32
+2
+Connector_Molex
+Molex_Sabre_43160-2103_1x03_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-2103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+8
+3
+Connector_Molex
+Molex_Sabre_43160-2103_1x03_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-2103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+47
+3
+Connector_Molex
+Molex_Sabre_43160-2104_1x04_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-2104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+10
+4
+Connector_Molex
+Molex_Sabre_43160-2104_1x04_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-2104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+62
+4
+Connector_Molex
+Molex_Sabre_43160-2105_1x05_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-2105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+12
+5
+Connector_Molex
+Molex_Sabre_43160-2105_1x05_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-2105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+77
+5
+Connector_Molex
+Molex_Sabre_43160-2106_1x06_P7.49mm_Vertical
+Molex Sabre Power Connector, 43160-2106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+14
+6
+Connector_Molex
+Molex_Sabre_43160-2106_1x06_P7.49mm_Vertical_ThermalVias
+Molex Sabre Power Connector, 43160-2106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre vertical
+0
+92
+6
+Connector_Molex
+Molex_Sabre_46007-1102_1x02_P7.49mm_Horizontal
+Molex Sabre Power Connector, 46007-1102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+4
+2
+Connector_Molex
+Molex_Sabre_46007-1102_1x02_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 46007-1102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+30
+2
+Connector_Molex
+Molex_Sabre_46007-1103_1x03_P7.49mm_Horizontal
+Molex Sabre Power Connector, 46007-1103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+6
+3
+Connector_Molex
+Molex_Sabre_46007-1103_1x03_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 46007-1103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+45
+3
+Connector_Molex
+Molex_Sabre_46007-1104_1x04_P7.49mm_Horizontal
+Molex Sabre Power Connector, 46007-1104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+8
+4
+Connector_Molex
+Molex_Sabre_46007-1104_1x04_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 46007-1104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+60
+4
+Connector_Molex
+Molex_Sabre_46007-1105_1x05_P7.49mm_Horizontal
+Molex Sabre Power Connector, 46007-1105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+10
+5
+Connector_Molex
+Molex_Sabre_46007-1105_1x05_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 46007-1105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+75
+5
+Connector_Molex
+Molex_Sabre_46007-1106_1x06_P7.49mm_Horizontal
+Molex Sabre Power Connector, 46007-1106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+12
+6
+Connector_Molex
+Molex_Sabre_46007-1106_1x06_P7.49mm_Horizontal_ThermalVias
+Molex Sabre Power Connector, 46007-1106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator
+connector Molex Sabre horizontal
+0
+90
+6
+Connector_Molex
+Molex_SlimStack_52991-0208_2x10_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0208, 20 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_52991-0308_2x15_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0308, 30 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_52991-0408_2x20_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0408, 40 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_52991-0508_2x25_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0508, 50 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_52991-0608_2x30_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0608, 60 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_52991-0708_2x35_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0708, 70 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+70
+70
+Connector_Molex
+Molex_SlimStack_52991-0808_2x40_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0808, 80 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_Molex
+Molex_SlimStack_53748-0208_2x10_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0208, 20 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_53748-0308_2x15_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0308, 30 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_53748-0408_2x20_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0408, 40 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_53748-0608_2x30_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0608, 60 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_53748-0708_2x35_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0708, 70 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+70
+70
+Connector_Molex
+Molex_SlimStack_53748-0808_2x40_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0808, 80 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_Molex
+Molex_SlimStack_54722-0164_2x08_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0164, 16 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+16
+16
+Connector_Molex
+Molex_SlimStack_54722-0204_2x10_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0204, 20 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_54722-0224_2x11_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0224, 22 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+22
+22
+Connector_Molex
+Molex_SlimStack_54722-0244_2x12_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0244, 24 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+24
+24
+Connector_Molex
+Molex_SlimStack_54722-0304_2x15_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0304, 30 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_54722-0344_2x17_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0344, 34 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+34
+34
+Connector_Molex
+Molex_SlimStack_54722-0404_2x20_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0404, 40 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_54722-0504_2x25_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0504, 50 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_54722-0604_2x30_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0604, 60 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_54722-0804_2x40_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0804, 80 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_Molex
+Molex_SlimStack_55560-0161_2x08_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0161, 16 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+16
+16
+Connector_Molex
+Molex_SlimStack_55560-0201_2x10_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0201, 20 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_55560-0221_2x11_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0221, 22 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+22
+22
+Connector_Molex
+Molex_SlimStack_55560-0241_2x12_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0241, 24 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+24
+24
+Connector_Molex
+Molex_SlimStack_55560-0301_2x15_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0301, 30 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_55560-0341_2x17_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0341, 34 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+34
+34
+Connector_Molex
+Molex_SlimStack_55560-0401_2x20_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0401, 40 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_55560-0501_2x25_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0501, 50 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_55560-0601_2x30_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0601, 60 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_55560-0801_2x40_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0801, 80 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_Molex
+Molex_SlimStack_501920-3001_2x15_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-3001, 30 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_501920-4001_2x20_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-4001, 40 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_501920-5001_2x25_P0.50mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-5001, 50 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_502426-0810_2x04_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-0810, 8 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+8
+8
+Connector_Molex
+Molex_SlimStack_502426-1410_2x07_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-1410, 14 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+14
+14
+Connector_Molex
+Molex_SlimStack_502426-2010_2x10_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2010, 20 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_502426-2210_2x11_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2210, 22 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+22
+22
+Connector_Molex
+Molex_SlimStack_502426-2410_2x12_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2410, 24 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+24
+24
+Connector_Molex
+Molex_SlimStack_502426-2610_2x13_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2610, 26 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+26
+26
+Connector_Molex
+Molex_SlimStack_502426-3010_2x15_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3010, 30 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_502426-3210_2x16_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3210, 32 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+32
+32
+Connector_Molex
+Molex_SlimStack_502426-3410_2x17_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3410, 34 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+34
+34
+Connector_Molex
+Molex_SlimStack_502426-4010_2x20_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-4010, 40 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_502426-4410_2x22_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-4410, 44 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+44
+44
+Connector_Molex
+Molex_SlimStack_502426-5010_2x25_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-5010, 50 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_502426-6010_2x30_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-6010, 60 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_502426-6410_2x32_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-6410, 64 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+64
+64
+Connector_Molex
+Molex_SlimStack_502426-8010_2x40_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-8010, 80 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_Molex
+Molex_SlimStack_502430-0820_2x04_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-0820, 8 Pins (http://www.molex.com/pdm_docs/sd/5024300820_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+8
+8
+Connector_Molex
+Molex_SlimStack_502430-1410_2x07_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-1410, 14 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+14
+14
+Connector_Molex
+Molex_SlimStack_502430-2010_2x10_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2010, 20 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+20
+20
+Connector_Molex
+Molex_SlimStack_502430-2210_2x11_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2210, 22 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+22
+22
+Connector_Molex
+Molex_SlimStack_502430-2410_2x12_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2410, 24 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+24
+24
+Connector_Molex
+Molex_SlimStack_502430-2610_2x13_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2610, 26 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+26
+26
+Connector_Molex
+Molex_SlimStack_502430-3010_2x15_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3010, 30 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+30
+30
+Connector_Molex
+Molex_SlimStack_502430-3210_2x16_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3210, 32 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+32
+32
+Connector_Molex
+Molex_SlimStack_502430-3410_2x17_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3410, 34 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+34
+34
+Connector_Molex
+Molex_SlimStack_502430-4010_2x20_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-4010, 40 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+40
+40
+Connector_Molex
+Molex_SlimStack_502430-4410_2x22_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-4410, 44 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+44
+44
+Connector_Molex
+Molex_SlimStack_502430-5010_2x25_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-5010, 50 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+50
+50
+Connector_Molex
+Molex_SlimStack_502430-6010_2x30_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-6010, 60 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+60
+60
+Connector_Molex
+Molex_SlimStack_502430-6410_2x32_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-6410, 64 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+64
+64
+Connector_Molex
+Molex_SlimStack_502430-8010_2x40_P0.40mm_Vertical
+Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-8010, 80 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator
+connector Molex SlimStack vertical
+0
+80
+80
+Connector_PCBEdge
+4UCON_10156_2x40_P1.27mm_Socket_Horizontal
+4UCON 10156 Card edge socket with 80 contacts (40 each side), through-hole, http://www.4uconnector.com/online/object/4udrawing/10156.pdf
+4UCON 10156 Card edge socket with 80 contacts
+0
+80
+80
+Connector_PCBEdge
+BUS_AT
+AT ISA 16 bits Bus Edge Connector
+BUS ISA AT Edge connector
+0
+98
+98
+Connector_PCBEdge
+BUS_PCI
+PCI bus Edge Connector
+PCI bus Edge Connector
+0
+240
+120
+Connector_PCBEdge
+BUS_PCI_Express_Mini
+Mini-PCI Express bus connector (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=11)
+mini pcie
+0
+54
+53
+Connector_PCBEdge
+BUS_PCI_Express_Mini_Dual
+Mini-PCI Express bus connector full size with dual clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=28)
+mini pcie
+0
+54
+53
+Connector_PCBEdge
+BUS_PCI_Express_Mini_Full
+Mini-PCI Express bus connector full size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=24)
+mini pcie
+0
+54
+53
+Connector_PCBEdge
+BUS_PCI_Express_Mini_Half
+Mini-PCI Express bus connector half size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=25)
+mini pcie
+0
+54
+53
+Connector_PCBEdge
+BUS_PCIexpress_x1
+PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70
+PCIe
+0
+36
+36
+Connector_PCBEdge
+BUS_PCIexpress_x4
+PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70
+PCIe
+0
+64
+64
+Connector_PCBEdge
+BUS_PCIexpress_x8
+PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70
+PCIe
+0
+98
+98
+Connector_PCBEdge
+BUS_PCIexpress_x16
+PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70
+PCIe
+0
+164
+164
+Connector_PCBEdge
+JAE_MM60-EZH039-Bx_BUS_PCI_Express_Holder
+PCI Express mini card latch for 3.9mm connector height, https://www.jae.com/direct/topics/topics_file_download/?topics_id=68909&ext_no=06&index=0&_lang=en&v=2022071912512930114109
+MiniPCI
+0
+6
+1
+Connector_PCBEdge
+JAE_MM60-EZH059-Bx_BUS_PCI_Express_Holder
+PCI Express mini card latch for 5.9mm connector height, https://www.jae.com/direct/topics/topics_file_download/topics_id=68910&ext_no=06&index=0&_lang=en&v=
+MiniPCI
+0
+6
+1
+Connector_PCBEdge
+SODIMM-200_1.8V_Card_edge
+SODIMM 200-pins edge connector, Jedec MO-224 Variation AB compliant (1.8V DDR2 SDRAM), 0.6mm pitch, https://www.jst-mfg.com/product/pdf/eng/eDM-200P.pdf
+sodimm
+0
+200
+200
+Connector_PCBEdge
+SODIMM-200_2.5V_Card_edge
+SODIMM 200-pins edge connector, Jedec MO-224 Variation AA compliant (2.5V DDR SDRAM), 0.6mm pitch, https://www.jst-mfg.com/product/pdf/eng/eDM-200P.pdf
+sodimm
+0
+200
+200
+Connector_PCBEdge
+SODIMM-260_DDR4_H4.0-5.2_OrientationStd_Socket
+DDR4 SODIMM Socket, 0.5 mm pitch, 260 positions, 4 mm or 5 mm height, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2309407%7F3%7Fpdf%7FEnglish%7FENG_CD_2309407_3.pdf%7F2309407-1
+SODIMM DIMM DDR DDR4 RAM
+0
+262
+261
+Connector_PCBEdge
+Samtec_MECF-05-0_-L-DV_2x05_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 05 contacts (polarized)
+conn samtec card-edge high-speed
+0
+8
+8
+Connector_PCBEdge
+Samtec_MECF-05-0_-NP-L-DV_2x05_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 05 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+10
+10
+Connector_PCBEdge
+Samtec_MECF-05-01-L-DV-WT_2x05_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 05 contacts (polarized)
+conn samtec card-edge high-speed
+0
+10
+8
+Connector_PCBEdge
+Samtec_MECF-05-01-L-DV_2x05_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 05 contacts (polarized)
+conn samtec card-edge high-speed
+0
+8
+8
+Connector_PCBEdge
+Samtec_MECF-05-01-NP-L-DV-WT_2x05_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 05 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+12
+10
+Connector_PCBEdge
+Samtec_MECF-05-01-NP-L-DV_2x05_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 05 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+10
+10
+Connector_PCBEdge
+Samtec_MECF-05-02-L-DV-WT_2x05_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized)
+conn samtec card-edge high-speed
+0
+10
+8
+Connector_PCBEdge
+Samtec_MECF-05-02-L-DV_2x05_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized)
+conn samtec card-edge high-speed
+0
+8
+8
+Connector_PCBEdge
+Samtec_MECF-05-02-NP-L-DV-WT_2x05_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 05 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+12
+10
+Connector_PCBEdge
+Samtec_MECF-05-02-NP-L-DV_2x05_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 05 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+10
+10
+Connector_PCBEdge
+Samtec_MECF-08-0_-L-DV_2x08_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 08 contacts (polarized)
+conn samtec card-edge high-speed
+0
+14
+14
+Connector_PCBEdge
+Samtec_MECF-08-0_-NP-L-DV_2x08_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 08 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+16
+16
+Connector_PCBEdge
+Samtec_MECF-08-01-L-DV-WT_2x08_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 08 contacts (polarized)
+conn samtec card-edge high-speed
+0
+16
+14
+Connector_PCBEdge
+Samtec_MECF-08-01-L-DV_2x08_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 08 contacts (polarized)
+conn samtec card-edge high-speed
+0
+14
+14
+Connector_PCBEdge
+Samtec_MECF-08-01-NP-L-DV-WT_2x08_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+18
+16
+Connector_PCBEdge
+Samtec_MECF-08-01-NP-L-DV_2x08_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+16
+16
+Connector_PCBEdge
+Samtec_MECF-08-02-L-DV-WT_2x08_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized)
+conn samtec card-edge high-speed
+0
+16
+14
+Connector_PCBEdge
+Samtec_MECF-08-02-L-DV_2x08_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized)
+conn samtec card-edge high-speed
+0
+14
+14
+Connector_PCBEdge
+Samtec_MECF-08-02-NP-L-DV-WT_2x08_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 08 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+18
+16
+Connector_PCBEdge
+Samtec_MECF-08-02-NP-L-DV_2x08_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 08 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+16
+16
+Connector_PCBEdge
+Samtec_MECF-20-0_-L-DV_2x20_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 20 contacts (polarized)
+conn samtec card-edge high-speed
+0
+38
+38
+Connector_PCBEdge
+Samtec_MECF-20-0_-NP-L-DV_2x20_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 20 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_PCBEdge
+Samtec_MECF-20-01-L-DV-WT_2x20_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 20 contacts (polarized)
+conn samtec card-edge high-speed
+0
+40
+38
+Connector_PCBEdge
+Samtec_MECF-20-01-L-DV_2x20_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 20 contacts (polarized)
+conn samtec card-edge high-speed
+0
+38
+38
+Connector_PCBEdge
+Samtec_MECF-20-01-NP-L-DV-WT_2x20_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 20 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+42
+40
+Connector_PCBEdge
+Samtec_MECF-20-01-NP-L-DV_2x20_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 20 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_PCBEdge
+Samtec_MECF-20-02-L-DV-WT_2x20_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 20 contacts (polarized)
+conn samtec card-edge high-speed
+0
+40
+38
+Connector_PCBEdge
+Samtec_MECF-20-02-L-DV_2x20_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 20 contacts (polarized)
+conn samtec card-edge high-speed
+0
+38
+38
+Connector_PCBEdge
+Samtec_MECF-20-02-NP-L-DV-WT_2x20_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 20 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+42
+40
+Connector_PCBEdge
+Samtec_MECF-20-02-NP-L-DV_2x20_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 20 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_PCBEdge
+Samtec_MECF-30-0_-L-DV_2x30_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 30 contacts (polarized)
+conn samtec card-edge high-speed
+0
+58
+58
+Connector_PCBEdge
+Samtec_MECF-30-0_-NP-L-DV_2x30_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 30 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_PCBEdge
+Samtec_MECF-30-01-L-DV-WT_2x30_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 30 contacts (polarized)
+conn samtec card-edge high-speed
+0
+60
+58
+Connector_PCBEdge
+Samtec_MECF-30-01-L-DV_2x30_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 30 contacts (polarized)
+conn samtec card-edge high-speed
+0
+58
+58
+Connector_PCBEdge
+Samtec_MECF-30-01-NP-L-DV-WT_2x30_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 30 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+62
+60
+Connector_PCBEdge
+Samtec_MECF-30-01-NP-L-DV_2x30_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 30 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_PCBEdge
+Samtec_MECF-30-02-L-DV-WT_2x30_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 30 contacts (polarized)
+conn samtec card-edge high-speed
+0
+60
+58
+Connector_PCBEdge
+Samtec_MECF-30-02-L-DV_2x30_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 30 contacts (polarized)
+conn samtec card-edge high-speed
+0
+58
+58
+Connector_PCBEdge
+Samtec_MECF-30-02-NP-L-DV-WT_2x30_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 30 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+62
+60
+Connector_PCBEdge
+Samtec_MECF-30-02-NP-L-DV_2x30_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 30 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_PCBEdge
+Samtec_MECF-40-0_-L-DV_2x40_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 40 contacts (polarized)
+conn samtec card-edge high-speed
+0
+78
+78
+Connector_PCBEdge
+Samtec_MECF-40-0_-NP-L-DV_2x40_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 40 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_PCBEdge
+Samtec_MECF-40-01-L-DV-WT_2x40_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 40 contacts (polarized)
+conn samtec card-edge high-speed
+0
+80
+78
+Connector_PCBEdge
+Samtec_MECF-40-01-L-DV_2x40_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 40 contacts (polarized)
+conn samtec card-edge high-speed
+0
+78
+78
+Connector_PCBEdge
+Samtec_MECF-40-01-NP-L-DV-WT_2x40_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 40 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+82
+80
+Connector_PCBEdge
+Samtec_MECF-40-01-NP-L-DV_2x40_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 40 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_PCBEdge
+Samtec_MECF-40-02-L-DV-WT_2x40_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 40 contacts (polarized)
+conn samtec card-edge high-speed
+0
+80
+78
+Connector_PCBEdge
+Samtec_MECF-40-02-L-DV_2x40_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 40 contacts (polarized)
+conn samtec card-edge high-speed
+0
+78
+78
+Connector_PCBEdge
+Samtec_MECF-40-02-NP-L-DV-WT_2x40_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 40 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+82
+80
+Connector_PCBEdge
+Samtec_MECF-40-02-NP-L-DV_2x40_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 40 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_PCBEdge
+Samtec_MECF-50-0_-L-DV_2x50_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 50 contacts (polarized)
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_PCBEdge
+Samtec_MECF-50-0_-NP-L-DV_2x50_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 50 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_PCBEdge
+Samtec_MECF-50-01-L-DV-WT_2x50_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized)
+conn samtec card-edge high-speed
+0
+100
+98
+Connector_PCBEdge
+Samtec_MECF-50-01-L-DV_2x50_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized)
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_PCBEdge
+Samtec_MECF-50-01-NP-L-DV-WT_2x50_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 50 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+102
+100
+Connector_PCBEdge
+Samtec_MECF-50-01-NP-L-DV_2x50_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 50 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_PCBEdge
+Samtec_MECF-50-02-L-DV-WT_2x50_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 50 contacts (polarized)
+conn samtec card-edge high-speed
+0
+100
+98
+Connector_PCBEdge
+Samtec_MECF-50-02-L-DV_2x50_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 50 contacts (polarized)
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_PCBEdge
+Samtec_MECF-50-02-NP-L-DV-WT_2x50_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 50 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+102
+100
+Connector_PCBEdge
+Samtec_MECF-50-02-NP-L-DV_2x50_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 50 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_PCBEdge
+Samtec_MECF-60-0_-L-DV_2x60_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 60 contacts (polarized)
+conn samtec card-edge high-speed
+0
+116
+116
+Connector_PCBEdge
+Samtec_MECF-60-0_-NP-L-DV_2x60_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 60 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_PCBEdge
+Samtec_MECF-60-01-L-DV-WT_2x60_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 60 contacts (polarized)
+conn samtec card-edge high-speed
+0
+118
+116
+Connector_PCBEdge
+Samtec_MECF-60-01-L-DV_2x60_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 60 contacts (polarized)
+conn samtec card-edge high-speed
+0
+116
+116
+Connector_PCBEdge
+Samtec_MECF-60-01-NP-L-DV-WT_2x60_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 60 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+122
+120
+Connector_PCBEdge
+Samtec_MECF-60-01-NP-L-DV_2x60_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 60 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_PCBEdge
+Samtec_MECF-60-02-L-DV-WT_2x60_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 60 contacts (polarized)
+conn samtec card-edge high-speed
+0
+118
+116
+Connector_PCBEdge
+Samtec_MECF-60-02-L-DV_2x60_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 60 contacts (polarized)
+conn samtec card-edge high-speed
+0
+116
+116
+Connector_PCBEdge
+Samtec_MECF-60-02-NP-L-DV-WT_2x60_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 60 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+122
+120
+Connector_PCBEdge
+Samtec_MECF-60-02-NP-L-DV_2x60_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 60 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_PCBEdge
+Samtec_MECF-70-0_-L-DV_2x70_P1.27mm_Polarized_Edge
+Highspeed card edge connector for PCB's with 70 contacts (polarized)
+conn samtec card-edge high-speed
+0
+136
+136
+Connector_PCBEdge
+Samtec_MECF-70-0_-NP-L-DV_2x70_P1.27mm_Edge
+Highspeed card edge connector for PCB's with 70 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_PCBEdge
+Samtec_MECF-70-01-L-DV-WT_2x70_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 70 contacts (polarized)
+conn samtec card-edge high-speed
+0
+138
+136
+Connector_PCBEdge
+Samtec_MECF-70-01-L-DV_2x70_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 70 contacts (polarized)
+conn samtec card-edge high-speed
+0
+136
+136
+Connector_PCBEdge
+Samtec_MECF-70-01-NP-L-DV-WT_2x70_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+142
+140
+Connector_PCBEdge
+Samtec_MECF-70-01-NP-L-DV_2x70_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_PCBEdge
+Samtec_MECF-70-02-L-DV-WT_2x70_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 70 contacts (polarized)
+conn samtec card-edge high-speed
+0
+138
+136
+Connector_PCBEdge
+Samtec_MECF-70-02-L-DV_2x70_P1.27mm_Polarized_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 70 contacts (polarized)
+conn samtec card-edge high-speed
+0
+136
+136
+Connector_PCBEdge
+Samtec_MECF-70-02-NP-L-DV-WT_2x70_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 70 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+142
+140
+Connector_PCBEdge
+Samtec_MECF-70-02-NP-L-DV_2x70_P1.27mm_Socket_Horizontal
+Highspeed card edge connector for 2.4mm PCB's with 70 contacts (not polarized)
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_PCBEdge
+molex_EDGELOCK_2-CKT
+https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf
+Connector PCBEdge molex EDGELOCK
+0
+2
+2
+Connector_PCBEdge
+molex_EDGELOCK_4-CKT
+https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf
+Connector PCBEdge molex EDGELOCK
+0
+4
+4
+Connector_PCBEdge
+molex_EDGELOCK_6-CKT
+https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf
+Connector PCBEdge molex EDGELOCK
+0
+6
+6
+Connector_PCBEdge
+molex_EDGELOCK_8-CKT
+https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf
+Connector PCBEdge molex EDGELOCK
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/2-G-7,62; number of pins: 02; pin pitch: 7.62mm; Angled || order number: 1766233 12A 630V
+phoenix_contact connector GMSTBA_01x02_G_7.62mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_2-G_1x02_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/2-G; number of pins: 02; pin pitch: 7.50mm; Angled || order number: 1766343 12A 630V
+phoenix_contact connector GMSTBA_01x02_G_7.50mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_3-G-7,62_1x03_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/3-G-7,62; number of pins: 03; pin pitch: 7.62mm; Angled || order number: 1766246 12A 630V
+phoenix_contact connector GMSTBA_01x03_G_7.62mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_3-G_1x03_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/3-G; number of pins: 03; pin pitch: 7.50mm; Angled || order number: 1766356 12A 630V
+phoenix_contact connector GMSTBA_01x03_G_7.50mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_4-G-7,62_1x04_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/4-G-7,62; number of pins: 04; pin pitch: 7.62mm; Angled || order number: 1766259 12A 630V
+phoenix_contact connector GMSTBA_01x04_G_7.62mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_4-G_1x04_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/4-G; number of pins: 04; pin pitch: 7.50mm; Angled || order number: 1766369 12A 630V
+phoenix_contact connector GMSTBA_01x04_G_7.50mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_5-G-7,62_1x05_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/5-G-7,62; number of pins: 05; pin pitch: 7.62mm; Angled || order number: 1766262 12A 630V
+phoenix_contact connector GMSTBA_01x05_G_7.62mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_5-G_1x05_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/5-G; number of pins: 05; pin pitch: 7.50mm; Angled || order number: 1766372 12A 630V
+phoenix_contact connector GMSTBA_01x05_G_7.50mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_6-G-7,62_1x06_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/6-G-7,62; number of pins: 06; pin pitch: 7.62mm; Angled || order number: 1766275 12A 630V
+phoenix_contact connector GMSTBA_01x06_G_7.62mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_6-G_1x06_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/6-G; number of pins: 06; pin pitch: 7.50mm; Angled || order number: 1766385 12A 630V
+phoenix_contact connector GMSTBA_01x06_G_7.50mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_7-G-7,62_1x07_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/7-G-7,62; number of pins: 07; pin pitch: 7.62mm; Angled || order number: 1766288 12A 630V
+phoenix_contact connector GMSTBA_01x07_G_7.62mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_7-G_1x07_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/7-G; number of pins: 07; pin pitch: 7.50mm; Angled || order number: 1766398 12A 630V
+phoenix_contact connector GMSTBA_01x07_G_7.50mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_8-G-7,62_1x08_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/8-G-7,62; number of pins: 08; pin pitch: 7.62mm; Angled || order number: 1766291 12A 630V
+phoenix_contact connector GMSTBA_01x08_G_7.62mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_8-G_1x08_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/8-G; number of pins: 08; pin pitch: 7.50mm; Angled || order number: 1766408 12A 630V
+phoenix_contact connector GMSTBA_01x08_G_7.50mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_9-G-7,62_1x09_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/9-G-7,62; number of pins: 09; pin pitch: 7.62mm; Angled || order number: 1766301 12A 630V
+phoenix_contact connector GMSTBA_01x09_G_7.62mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_9-G_1x09_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/9-G; number of pins: 09; pin pitch: 7.50mm; Angled || order number: 1766411 12A 630V
+phoenix_contact connector GMSTBA_01x09_G_7.50mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_10-G-7,62_1x10_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/10-G-7,62; number of pins: 10; pin pitch: 7.62mm; Angled || order number: 1766314 12A 630V
+phoenix_contact connector GMSTBA_01x10_G_7.62mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_10-G_1x10_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/10-G; number of pins: 10; pin pitch: 7.50mm; Angled || order number: 1766424 12A 630V
+phoenix_contact connector GMSTBA_01x10_G_7.50mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_11-G-7,62_1x11_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/11-G-7,62; number of pins: 11; pin pitch: 7.62mm; Angled || order number: 1766327 12A 630V
+phoenix_contact connector GMSTBA_01x11_G_7.62mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_11-G_1x11_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/11-G; number of pins: 11; pin pitch: 7.50mm; Angled || order number: 1766437 12A 630V
+phoenix_contact connector GMSTBA_01x11_G_7.50mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_12-G-7,62_1x12_P7.62mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/12-G-7,62; number of pins: 12; pin pitch: 7.62mm; Angled || order number: 1766330 12A 630V
+phoenix_contact connector GMSTBA_01x12_G_7.62mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBA_2,5_12-G_1x12_P7.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: GMSTBA_2,5/12-G; number of pins: 12; pin pitch: 7.50mm; Angled || order number: 1766440 12A 630V
+phoenix_contact connector GMSTBA_01x12_G_7.50mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_2-G-7,62_1x02_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/2-G-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical || order number: 1766770 12A 630V
+phoenix_contact connector GMSTBVA_01x02_G_7.62mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_2-G_1x02_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/2-G; number of pins: 02; pin pitch: 7.50mm; Vertical || order number: 1766660 12A 630V
+phoenix_contact connector GMSTBVA_01x02_G_7.50mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_3-G-7,62_1x03_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/3-G-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical || order number: 1766783 12A 630V
+phoenix_contact connector GMSTBVA_01x03_G_7.62mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_3-G_1x03_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/3-G; number of pins: 03; pin pitch: 7.50mm; Vertical || order number: 1766673 12A 630V
+phoenix_contact connector GMSTBVA_01x03_G_7.50mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_4-G-7,62_1x04_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/4-G-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical || order number: 1766796 12A 630V
+phoenix_contact connector GMSTBVA_01x04_G_7.62mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_4-G_1x04_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/4-G; number of pins: 04; pin pitch: 7.50mm; Vertical || order number: 1766686 12A 630V
+phoenix_contact connector GMSTBVA_01x04_G_7.50mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_5-G-7,62_1x05_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/5-G-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical || order number: 1766806 12A 630V
+phoenix_contact connector GMSTBVA_01x05_G_7.62mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_5-G_1x05_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/5-G; number of pins: 05; pin pitch: 7.50mm; Vertical || order number: 1766699 12A 630V
+phoenix_contact connector GMSTBVA_01x05_G_7.50mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_6-G-7,62_1x06_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/6-G-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical || order number: 1766819 12A 630V
+phoenix_contact connector GMSTBVA_01x06_G_7.62mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_6-G_1x06_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/6-G; number of pins: 06; pin pitch: 7.50mm; Vertical || order number: 1766709 12A 630V
+phoenix_contact connector GMSTBVA_01x06_G_7.50mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_7-G-7,62_1x07_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/7-G-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical || order number: 1766822 12A 630V
+phoenix_contact connector GMSTBVA_01x07_G_7.62mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_7-G_1x07_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/7-G; number of pins: 07; pin pitch: 7.50mm; Vertical || order number: 1766712 12A 630V
+phoenix_contact connector GMSTBVA_01x07_G_7.50mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_8-G-7,62_1x08_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/8-G-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical || order number: 1766835 12A 630V
+phoenix_contact connector GMSTBVA_01x08_G_7.62mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_8-G_1x08_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/8-G; number of pins: 08; pin pitch: 7.50mm; Vertical || order number: 1766725 12A 630V
+phoenix_contact connector GMSTBVA_01x08_G_7.50mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_9-G-7,62_1x09_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/9-G-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical || order number: 1766848 12A 630V
+phoenix_contact connector GMSTBVA_01x09_G_7.62mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_9-G_1x09_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/9-G; number of pins: 09; pin pitch: 7.50mm; Vertical || order number: 1766738 12A 630V
+phoenix_contact connector GMSTBVA_01x09_G_7.50mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_10-G-7,62_1x10_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/10-G-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical || order number: 1766851 12A 630V
+phoenix_contact connector GMSTBVA_01x10_G_7.62mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_10-G_1x10_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/10-G; number of pins: 10; pin pitch: 7.50mm; Vertical || order number: 1766741 12A 630V
+phoenix_contact connector GMSTBVA_01x10_G_7.50mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_11-G-7,62_1x11_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/11-G-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical || order number: 1766864 12A 630V
+phoenix_contact connector GMSTBVA_01x11_G_7.62mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_11-G_1x11_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/11-G; number of pins: 11; pin pitch: 7.50mm; Vertical || order number: 1766754 12A 630V
+phoenix_contact connector GMSTBVA_01x11_G_7.50mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_12-G-7,62_1x12_P7.62mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/12-G-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical || order number: 1766877 12A 630V
+phoenix_contact connector GMSTBVA_01x12_G_7.62mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBVA_2,5_12-G_1x12_P7.50mm_Vertical
+Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/12-G; number of pins: 12; pin pitch: 7.50mm; Vertical || order number: 1766767 12A 630V
+phoenix_contact connector GMSTBVA_01x12_G_7.50mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_2-GF-7,62_1x02_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829154 12A 630V
+phoenix_contact connector GMSTBV_01x02_GF_7.62mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_2-GF-7,62_1x02_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829154 12A 630V
+phoenix_contact connector GMSTBV_01x02_GF_7.62mm_MH
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_3-GF-7,62_1x03_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829167 12A 630V
+phoenix_contact connector GMSTBV_01x03_GF_7.62mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_3-GF-7,62_1x03_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829167 12A 630V
+phoenix_contact connector GMSTBV_01x03_GF_7.62mm_MH
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_4-GF-7,62_1x04_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829170 12A 630V
+phoenix_contact connector GMSTBV_01x04_GF_7.62mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_4-GF-7,62_1x04_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829170 12A 630V
+phoenix_contact connector GMSTBV_01x04_GF_7.62mm_MH
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_5-GF-7,62_1x05_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829183 12A 630V
+phoenix_contact connector GMSTBV_01x05_GF_7.62mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_5-GF-7,62_1x05_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829183 12A 630V
+phoenix_contact connector GMSTBV_01x05_GF_7.62mm_MH
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829196 12A 630V
+phoenix_contact connector GMSTBV_01x06_GF_7.62mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829196 12A 630V
+phoenix_contact connector GMSTBV_01x06_GF_7.62mm_MH
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_7-GF-7,62_1x07_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829206 12A 630V
+phoenix_contact connector GMSTBV_01x07_GF_7.62mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_7-GF-7,62_1x07_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829206 12A 630V
+phoenix_contact connector GMSTBV_01x07_GF_7.62mm_MH
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_8-GF-7,62_1x08_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829219 12A 630V
+phoenix_contact connector GMSTBV_01x08_GF_7.62mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_8-GF-7,62_1x08_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829219 12A 630V
+phoenix_contact connector GMSTBV_01x08_GF_7.62mm_MH
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_9-GF-7,62_1x09_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829222 12A 630V
+phoenix_contact connector GMSTBV_01x09_GF_7.62mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_9-GF-7,62_1x09_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829222 12A 630V
+phoenix_contact connector GMSTBV_01x09_GF_7.62mm_MH
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_10-GF-7,62_1x10_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829235 12A 630V
+phoenix_contact connector GMSTBV_01x10_GF_7.62mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_10-GF-7,62_1x10_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829235 12A 630V
+phoenix_contact connector GMSTBV_01x10_GF_7.62mm_MH
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_11-GF-7,62_1x11_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829248 12A 630V
+phoenix_contact connector GMSTBV_01x11_GF_7.62mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_11-GF-7,62_1x11_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829248 12A 630V
+phoenix_contact connector GMSTBV_01x11_GF_7.62mm_MH
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_12-GF-7,62_1x12_P7.62mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829251 12A 630V
+phoenix_contact connector GMSTBV_01x12_GF_7.62mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTBV_2,5_12-GF-7,62_1x12_P7.62mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTBV_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829251 12A 630V
+phoenix_contact connector GMSTBV_01x12_GF_7.62mm_MH
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_2-GF-7,62_1x02_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806229 12A 630V
+phoenix_contact connector GMSTB_01x02_GF_7.62mm
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_2-GF-7,62_1x02_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806229 12A 630V
+phoenix_contact connector GMSTB_01x02_GF_7.62mm_MH
+0
+2
+2
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_3-GF-7,62_1x03_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806232 12A 630V
+phoenix_contact connector GMSTB_01x03_GF_7.62mm
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_3-GF-7,62_1x03_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806232 12A 630V
+phoenix_contact connector GMSTB_01x03_GF_7.62mm_MH
+0
+3
+3
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_4-GF-7,62_1x04_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806245 12A 630V
+phoenix_contact connector GMSTB_01x04_GF_7.62mm
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_4-GF-7,62_1x04_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806245 12A 630V
+phoenix_contact connector GMSTB_01x04_GF_7.62mm_MH
+0
+4
+4
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_5-GF-7,62_1x05_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806258 12A 630V
+phoenix_contact connector GMSTB_01x05_GF_7.62mm
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_5-GF-7,62_1x05_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806258 12A 630V
+phoenix_contact connector GMSTB_01x05_GF_7.62mm_MH
+0
+5
+5
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_6-GF-7,62_1x06_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806261 12A 630V
+phoenix_contact connector GMSTB_01x06_GF_7.62mm
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_6-GF-7,62_1x06_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806261 12A 630V
+phoenix_contact connector GMSTB_01x06_GF_7.62mm_MH
+0
+6
+6
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_7-GF-7,62_1x07_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806274 12A 630V
+phoenix_contact connector GMSTB_01x07_GF_7.62mm
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_7-GF-7,62_1x07_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806274 12A 630V
+phoenix_contact connector GMSTB_01x07_GF_7.62mm_MH
+0
+7
+7
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_8-GF-7,62_1x08_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806287 12A 630V
+phoenix_contact connector GMSTB_01x08_GF_7.62mm
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_8-GF-7,62_1x08_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806287 12A 630V
+phoenix_contact connector GMSTB_01x08_GF_7.62mm_MH
+0
+8
+8
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_9-GF-7,62_1x09_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806290 12A 630V
+phoenix_contact connector GMSTB_01x09_GF_7.62mm
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_9-GF-7,62_1x09_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806290 12A 630V
+phoenix_contact connector GMSTB_01x09_GF_7.62mm_MH
+0
+9
+9
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_10-GF-7,62_1x10_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806300 12A 630V
+phoenix_contact connector GMSTB_01x10_GF_7.62mm
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_10-GF-7,62_1x10_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806300 12A 630V
+phoenix_contact connector GMSTB_01x10_GF_7.62mm_MH
+0
+10
+10
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_11-GF-7,62_1x11_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806313 12A 630V
+phoenix_contact connector GMSTB_01x11_GF_7.62mm
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_11-GF-7,62_1x11_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806313 12A 630V
+phoenix_contact connector GMSTB_01x11_GF_7.62mm_MH
+0
+11
+11
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_12-GF-7,62_1x12_P7.62mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806326 12A 630V
+phoenix_contact connector GMSTB_01x12_GF_7.62mm
+0
+12
+12
+Connector_Phoenix_GMSTB
+PhoenixContact_GMSTB_2,5_12-GF-7,62_1x12_P7.62mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: GMSTB_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806326 12A 630V
+phoenix_contact connector GMSTB_01x12_GF_7.62mm_MH
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-G-3.5_1x02_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical || order number: 1843606 8A 160V
+phoenix_contact connector MCV_01x02_G_3.5mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical || order number: 1803426 8A 160V
+phoenix_contact connector MCV_01x02_G_3.81mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-GF-3.5_1x02_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843224 8A 160V
+phoenix_contact connector MCV_01x02_GF_3.5mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-GF-3.5_1x02_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843224 8A 160V
+phoenix_contact connector MCV_01x02_GF_3.5mm_MH
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-GF-3.81_1x02_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830596 8A 160V
+phoenix_contact connector MCV_01x02_GF_3.81mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_2-GF-3.81_1x02_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830596 8A 160V
+phoenix_contact connector MCV_01x02_GF_3.81mm_MH
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical || order number: 1843619 8A 160V
+phoenix_contact connector MCV_01x03_G_3.5mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-G-3.81_1x03_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical || order number: 1803439 8A 160V
+phoenix_contact connector MCV_01x03_G_3.81mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-GF-3.5_1x03_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843237 8A 160V
+phoenix_contact connector MCV_01x03_GF_3.5mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-GF-3.5_1x03_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843237 8A 160V
+phoenix_contact connector MCV_01x03_GF_3.5mm_MH
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-GF-3.81_1x03_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830606 8A 160V
+phoenix_contact connector MCV_01x03_GF_3.81mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_3-GF-3.81_1x03_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830606 8A 160V
+phoenix_contact connector MCV_01x03_GF_3.81mm_MH
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical || order number: 1843622 8A 160V
+phoenix_contact connector MCV_01x04_G_3.5mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-G-3.81_1x04_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical || order number: 1803442 8A 160V
+phoenix_contact connector MCV_01x04_G_3.81mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-GF-3.5_1x04_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843240 8A 160V
+phoenix_contact connector MCV_01x04_GF_3.5mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-GF-3.5_1x04_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843240 8A 160V
+phoenix_contact connector MCV_01x04_GF_3.5mm_MH
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-GF-3.81_1x04_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830619 8A 160V
+phoenix_contact connector MCV_01x04_GF_3.81mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_4-GF-3.81_1x04_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830619 8A 160V
+phoenix_contact connector MCV_01x04_GF_3.81mm_MH
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical || order number: 1843635 8A 160V
+phoenix_contact connector MCV_01x05_G_3.5mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-G-3.81_1x05_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical || order number: 1803455 8A 160V
+phoenix_contact connector MCV_01x05_G_3.81mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-GF-3.5_1x05_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843253 8A 160V
+phoenix_contact connector MCV_01x05_GF_3.5mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-GF-3.5_1x05_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843253 8A 160V
+phoenix_contact connector MCV_01x05_GF_3.5mm_MH
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-GF-3.81_1x05_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830622 8A 160V
+phoenix_contact connector MCV_01x05_GF_3.81mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_5-GF-3.81_1x05_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830622 8A 160V
+phoenix_contact connector MCV_01x05_GF_3.81mm_MH
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-G-3.5_1x06_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical || order number: 1843648 8A 160V
+phoenix_contact connector MCV_01x06_G_3.5mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-G-3.81_1x06_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical || order number: 1803468 8A 160V
+phoenix_contact connector MCV_01x06_G_3.81mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-GF-3.5_1x06_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843266 8A 160V
+phoenix_contact connector MCV_01x06_GF_3.5mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-GF-3.5_1x06_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843266 8A 160V
+phoenix_contact connector MCV_01x06_GF_3.5mm_MH
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-GF-3.81_1x06_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830635 8A 160V
+phoenix_contact connector MCV_01x06_GF_3.81mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_6-GF-3.81_1x06_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830635 8A 160V
+phoenix_contact connector MCV_01x06_GF_3.81mm_MH
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-G-3.5_1x07_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical || order number: 1843651 8A 160V
+phoenix_contact connector MCV_01x07_G_3.5mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-G-3.81_1x07_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical || order number: 1803471 8A 160V
+phoenix_contact connector MCV_01x07_G_3.81mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-GF-3.5_1x07_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843279 8A 160V
+phoenix_contact connector MCV_01x07_GF_3.5mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-GF-3.5_1x07_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843279 8A 160V
+phoenix_contact connector MCV_01x07_GF_3.5mm_MH
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-GF-3.81_1x07_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830648 8A 160V
+phoenix_contact connector MCV_01x07_GF_3.81mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_7-GF-3.81_1x07_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830648 8A 160V
+phoenix_contact connector MCV_01x07_GF_3.81mm_MH
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-G-3.5_1x08_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical || order number: 1843664 8A 160V
+phoenix_contact connector MCV_01x08_G_3.5mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-G-3.81_1x08_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical || order number: 1803484 8A 160V
+phoenix_contact connector MCV_01x08_G_3.81mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-GF-3.5_1x08_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843282 8A 160V
+phoenix_contact connector MCV_01x08_GF_3.5mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-GF-3.5_1x08_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843282 8A 160V
+phoenix_contact connector MCV_01x08_GF_3.5mm_MH
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-GF-3.81_1x08_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830651 8A 160V
+phoenix_contact connector MCV_01x08_GF_3.81mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_8-GF-3.81_1x08_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830651 8A 160V
+phoenix_contact connector MCV_01x08_GF_3.81mm_MH
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-G-3.5_1x09_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical || order number: 1843677 8A 160V
+phoenix_contact connector MCV_01x09_G_3.5mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-G-3.81_1x09_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical || order number: 1803497 8A 160V
+phoenix_contact connector MCV_01x09_G_3.81mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-GF-3.5_1x09_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843295 8A 160V
+phoenix_contact connector MCV_01x09_GF_3.5mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-GF-3.5_1x09_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843295 8A 160V
+phoenix_contact connector MCV_01x09_GF_3.5mm_MH
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-GF-3.81_1x09_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830664 8A 160V
+phoenix_contact connector MCV_01x09_GF_3.81mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_9-GF-3.81_1x09_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830664 8A 160V
+phoenix_contact connector MCV_01x09_GF_3.81mm_MH
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-G-3.5_1x10_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical || order number: 1843680 8A 160V
+phoenix_contact connector MCV_01x10_G_3.5mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-G-3.81_1x10_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical || order number: 1803507 8A 160V
+phoenix_contact connector MCV_01x10_G_3.81mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-GF-3.5_1x10_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843305 8A 160V
+phoenix_contact connector MCV_01x10_GF_3.5mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-GF-3.5_1x10_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843305 8A 160V
+phoenix_contact connector MCV_01x10_GF_3.5mm_MH
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-GF-3.81_1x10_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830677 8A 160V
+phoenix_contact connector MCV_01x10_GF_3.81mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_10-GF-3.81_1x10_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830677 8A 160V
+phoenix_contact connector MCV_01x10_GF_3.81mm_MH
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-G-3.5_1x11_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical || order number: 1843693 8A 160V
+phoenix_contact connector MCV_01x11_G_3.5mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-G-3.81_1x11_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical || order number: 1803510 8A 160V
+phoenix_contact connector MCV_01x11_G_3.81mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-GF-3.5_1x11_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843318 8A 160V
+phoenix_contact connector MCV_01x11_GF_3.5mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-GF-3.5_1x11_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843318 8A 160V
+phoenix_contact connector MCV_01x11_GF_3.5mm_MH
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-GF-3.81_1x11_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830680 8A 160V
+phoenix_contact connector MCV_01x11_GF_3.81mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_11-GF-3.81_1x11_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830680 8A 160V
+phoenix_contact connector MCV_01x11_GF_3.81mm_MH
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-G-3.5_1x12_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical || order number: 1843703 8A 160V
+phoenix_contact connector MCV_01x12_G_3.5mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-G-3.81_1x12_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical || order number: 1803523 8A 160V
+phoenix_contact connector MCV_01x12_G_3.81mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-GF-3.5_1x12_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843321 8A 160V
+phoenix_contact connector MCV_01x12_GF_3.5mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-GF-3.5_1x12_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843321 8A 160V
+phoenix_contact connector MCV_01x12_GF_3.5mm_MH
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-GF-3.81_1x12_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830693 8A 160V
+phoenix_contact connector MCV_01x12_GF_3.81mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_12-GF-3.81_1x12_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830693 8A 160V
+phoenix_contact connector MCV_01x12_GF_3.81mm_MH
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-G-3.5_1x13_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-G-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical || order number: 1843716 8A 160V
+phoenix_contact connector MCV_01x13_G_3.5mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-G-3.81_1x13_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-G-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical || order number: 1803536 8A 160V
+phoenix_contact connector MCV_01x13_G_3.81mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-GF-3.5_1x13_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843334 8A 160V
+phoenix_contact connector MCV_01x13_GF_3.5mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-GF-3.5_1x13_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843334 8A 160V
+phoenix_contact connector MCV_01x13_GF_3.5mm_MH
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-GF-3.81_1x13_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830703 8A 160V
+phoenix_contact connector MCV_01x13_GF_3.81mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_13-GF-3.81_1x13_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830703 8A 160V
+phoenix_contact connector MCV_01x13_GF_3.81mm_MH
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-G-3.5_1x14_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-G-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical || order number: 1843729 8A 160V
+phoenix_contact connector MCV_01x14_G_3.5mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-G-3.81_1x14_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-G-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical || order number: 1803549 8A 160V
+phoenix_contact connector MCV_01x14_G_3.81mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-GF-3.5_1x14_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843347 8A 160V
+phoenix_contact connector MCV_01x14_GF_3.5mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-GF-3.5_1x14_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843347 8A 160V
+phoenix_contact connector MCV_01x14_GF_3.5mm_MH
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-GF-3.81_1x14_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830716 8A 160V
+phoenix_contact connector MCV_01x14_GF_3.81mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_14-GF-3.81_1x14_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830716 8A 160V
+phoenix_contact connector MCV_01x14_GF_3.81mm_MH
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-G-3.5_1x15_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-G-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical || order number: 1843732 8A 160V
+phoenix_contact connector MCV_01x15_G_3.5mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-G-3.81_1x15_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-G-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical || order number: 1803552 8A 160V
+phoenix_contact connector MCV_01x15_G_3.81mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-GF-3.5_1x15_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843350 8A 160V
+phoenix_contact connector MCV_01x15_GF_3.5mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-GF-3.5_1x15_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843350 8A 160V
+phoenix_contact connector MCV_01x15_GF_3.5mm_MH
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-GF-3.81_1x15_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830729 8A 160V
+phoenix_contact connector MCV_01x15_GF_3.81mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_15-GF-3.81_1x15_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830729 8A 160V
+phoenix_contact connector MCV_01x15_GF_3.81mm_MH
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-G-3.5_1x16_P3.50mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-G-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical || order number: 1843745 8A 160V
+phoenix_contact connector MCV_01x16_G_3.5mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-G-3.81_1x16_P3.81mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-G-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical || order number: 1803565 8A 160V
+phoenix_contact connector MCV_01x16_G_3.81mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-GF-3.5_1x16_P3.50mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843363 8A 160V
+phoenix_contact connector MCV_01x16_GF_3.5mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-GF-3.5_1x16_P3.50mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843363 8A 160V
+phoenix_contact connector MCV_01x16_GF_3.5mm_MH
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-GF-3.81_1x16_P3.81mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830732 8A 160V
+phoenix_contact connector MCV_01x16_GF_3.81mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MCV_1,5_16-GF-3.81_1x16_P3.81mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830732 8A 160V
+phoenix_contact connector MCV_01x16_GF_3.81mm_MH
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/2-G-3.5; number of pins: 02; pin pitch: 3.50mm; Angled || order number: 1844210 8A 160V
+phoenix_contact connector MC_01x02_G_3.5mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/2-G-3.81; number of pins: 02; pin pitch: 3.81mm; Angled || order number: 1803277 8A 160V
+phoenix_contact connector MC_01x02_G_3.81mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-GF-3.5_1x02_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843790 8A 160V
+phoenix_contact connector MC_01x02_GF_3.5mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-GF-3.5_1x02_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843790 8A 160V
+phoenix_contact connector MC_01x02_GF_3.5mm_MH
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-GF-3.81_1x02_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827868 8A 160V
+phoenix_contact connector MC_01x02_GF_3.81mm
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_2-GF-3.81_1x02_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827868 8A 160V
+phoenix_contact connector MC_01x02_GF_3.81mm_MH
+0
+2
+2
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/3-G-3.5; number of pins: 03; pin pitch: 3.50mm; Angled || order number: 1844223 8A 160V
+phoenix_contact connector MC_01x03_G_3.5mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/3-G-3.81; number of pins: 03; pin pitch: 3.81mm; Angled || order number: 1803280 8A 160V
+phoenix_contact connector MC_01x03_G_3.81mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-GF-3.5_1x03_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843800 8A 160V
+phoenix_contact connector MC_01x03_GF_3.5mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-GF-3.5_1x03_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843800 8A 160V
+phoenix_contact connector MC_01x03_GF_3.5mm_MH
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-GF-3.81_1x03_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827871 8A 160V
+phoenix_contact connector MC_01x03_GF_3.81mm
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_3-GF-3.81_1x03_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827871 8A 160V
+phoenix_contact connector MC_01x03_GF_3.81mm_MH
+0
+3
+3
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/4-G-3.5; number of pins: 04; pin pitch: 3.50mm; Angled || order number: 1844236 8A 160V
+phoenix_contact connector MC_01x04_G_3.5mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/4-G-3.81; number of pins: 04; pin pitch: 3.81mm; Angled || order number: 1803293 8A 160V
+phoenix_contact connector MC_01x04_G_3.81mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-GF-3.5_1x04_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843813 8A 160V
+phoenix_contact connector MC_01x04_GF_3.5mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-GF-3.5_1x04_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843813 8A 160V
+phoenix_contact connector MC_01x04_GF_3.5mm_MH
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-GF-3.81_1x04_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827884 8A 160V
+phoenix_contact connector MC_01x04_GF_3.81mm
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_4-GF-3.81_1x04_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827884 8A 160V
+phoenix_contact connector MC_01x04_GF_3.81mm_MH
+0
+4
+4
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-G-3.5_1x05_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/5-G-3.5; number of pins: 05; pin pitch: 3.50mm; Angled || order number: 1844249 8A 160V
+phoenix_contact connector MC_01x05_G_3.5mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-G-3.81_1x05_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/5-G-3.81; number of pins: 05; pin pitch: 3.81mm; Angled || order number: 1803303 8A 160V
+phoenix_contact connector MC_01x05_G_3.81mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-GF-3.5_1x05_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843826 8A 160V
+phoenix_contact connector MC_01x05_GF_3.5mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-GF-3.5_1x05_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843826 8A 160V
+phoenix_contact connector MC_01x05_GF_3.5mm_MH
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-GF-3.81_1x05_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827897 8A 160V
+phoenix_contact connector MC_01x05_GF_3.81mm
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_5-GF-3.81_1x05_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827897 8A 160V
+phoenix_contact connector MC_01x05_GF_3.81mm_MH
+0
+5
+5
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/6-G-3.5; number of pins: 06; pin pitch: 3.50mm; Angled || order number: 1844252 8A 160V
+phoenix_contact connector MC_01x06_G_3.5mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-G-3.81_1x06_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/6-G-3.81; number of pins: 06; pin pitch: 3.81mm; Angled || order number: 1803316 8A 160V
+phoenix_contact connector MC_01x06_G_3.81mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-GF-3.5_1x06_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843839 8A 160V
+phoenix_contact connector MC_01x06_GF_3.5mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-GF-3.5_1x06_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843839 8A 160V
+phoenix_contact connector MC_01x06_GF_3.5mm_MH
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-GF-3.81_1x06_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827907 8A 160V
+phoenix_contact connector MC_01x06_GF_3.81mm
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_6-GF-3.81_1x06_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827907 8A 160V
+phoenix_contact connector MC_01x06_GF_3.81mm_MH
+0
+6
+6
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-G-3.5_1x07_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/7-G-3.5; number of pins: 07; pin pitch: 3.50mm; Angled || order number: 1844265 8A 160V
+phoenix_contact connector MC_01x07_G_3.5mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-G-3.81_1x07_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/7-G-3.81; number of pins: 07; pin pitch: 3.81mm; Angled || order number: 1803329 8A 160V
+phoenix_contact connector MC_01x07_G_3.81mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-GF-3.5_1x07_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843842 8A 160V
+phoenix_contact connector MC_01x07_GF_3.5mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-GF-3.5_1x07_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843842 8A 160V
+phoenix_contact connector MC_01x07_GF_3.5mm_MH
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-GF-3.81_1x07_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827910 8A 160V
+phoenix_contact connector MC_01x07_GF_3.81mm
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_7-GF-3.81_1x07_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827910 8A 160V
+phoenix_contact connector MC_01x07_GF_3.81mm_MH
+0
+7
+7
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-G-3.5_1x08_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/8-G-3.5; number of pins: 08; pin pitch: 3.50mm; Angled || order number: 1844278 8A 160V
+phoenix_contact connector MC_01x08_G_3.5mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-G-3.81_1x08_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/8-G-3.81; number of pins: 08; pin pitch: 3.81mm; Angled || order number: 1803332 8A 160V
+phoenix_contact connector MC_01x08_G_3.81mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-GF-3.5_1x08_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843855 8A 160V
+phoenix_contact connector MC_01x08_GF_3.5mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-GF-3.5_1x08_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843855 8A 160V
+phoenix_contact connector MC_01x08_GF_3.5mm_MH
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827923 8A 160V
+phoenix_contact connector MC_01x08_GF_3.81mm
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827923 8A 160V
+phoenix_contact connector MC_01x08_GF_3.81mm_MH
+0
+8
+8
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-G-3.5_1x09_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/9-G-3.5; number of pins: 09; pin pitch: 3.50mm; Angled || order number: 1844281 8A 160V
+phoenix_contact connector MC_01x09_G_3.5mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-G-3.81_1x09_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/9-G-3.81; number of pins: 09; pin pitch: 3.81mm; Angled || order number: 1803345 8A 160V
+phoenix_contact connector MC_01x09_G_3.81mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-GF-3.5_1x09_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843868 8A 160V
+phoenix_contact connector MC_01x09_GF_3.5mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-GF-3.5_1x09_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843868 8A 160V
+phoenix_contact connector MC_01x09_GF_3.5mm_MH
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-GF-3.81_1x09_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827936 8A 160V
+phoenix_contact connector MC_01x09_GF_3.81mm
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_9-GF-3.81_1x09_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827936 8A 160V
+phoenix_contact connector MC_01x09_GF_3.81mm_MH
+0
+9
+9
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-G-3.5_1x10_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/10-G-3.5; number of pins: 10; pin pitch: 3.50mm; Angled || order number: 1844294 8A 160V
+phoenix_contact connector MC_01x10_G_3.5mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-G-3.81_1x10_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/10-G-3.81; number of pins: 10; pin pitch: 3.81mm; Angled || order number: 1803358 8A 160V
+phoenix_contact connector MC_01x10_G_3.81mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-GF-3.5_1x10_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843871 8A 160V
+phoenix_contact connector MC_01x10_GF_3.5mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-GF-3.5_1x10_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843871 8A 160V
+phoenix_contact connector MC_01x10_GF_3.5mm_MH
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-GF-3.81_1x10_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827949 8A 160V
+phoenix_contact connector MC_01x10_GF_3.81mm
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_10-GF-3.81_1x10_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827949 8A 160V
+phoenix_contact connector MC_01x10_GF_3.81mm_MH
+0
+10
+10
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-G-3.5_1x11_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/11-G-3.5; number of pins: 11; pin pitch: 3.50mm; Angled || order number: 1844304 8A 160V
+phoenix_contact connector MC_01x11_G_3.5mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-G-3.81_1x11_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/11-G-3.81; number of pins: 11; pin pitch: 3.81mm; Angled || order number: 1803361 8A 160V
+phoenix_contact connector MC_01x11_G_3.81mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-GF-3.5_1x11_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843884 8A 160V
+phoenix_contact connector MC_01x11_GF_3.5mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-GF-3.5_1x11_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843884 8A 160V
+phoenix_contact connector MC_01x11_GF_3.5mm_MH
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-GF-3.81_1x11_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827952 8A 160V
+phoenix_contact connector MC_01x11_GF_3.81mm
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_11-GF-3.81_1x11_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827952 8A 160V
+phoenix_contact connector MC_01x11_GF_3.81mm_MH
+0
+11
+11
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-G-3.5_1x12_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/12-G-3.5; number of pins: 12; pin pitch: 3.50mm; Angled || order number: 1844317 8A 160V
+phoenix_contact connector MC_01x12_G_3.5mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-G-3.81_1x12_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/12-G-3.81; number of pins: 12; pin pitch: 3.81mm; Angled || order number: 1803374 8A 160V
+phoenix_contact connector MC_01x12_G_3.81mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-GF-3.5_1x12_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843897 8A 160V
+phoenix_contact connector MC_01x12_GF_3.5mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-GF-3.5_1x12_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843897 8A 160V
+phoenix_contact connector MC_01x12_GF_3.5mm_MH
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-GF-3.81_1x12_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827965 8A 160V
+phoenix_contact connector MC_01x12_GF_3.81mm
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_12-GF-3.81_1x12_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827965 8A 160V
+phoenix_contact connector MC_01x12_GF_3.81mm_MH
+0
+12
+12
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/13-G-3.5; number of pins: 13; pin pitch: 3.50mm; Angled || order number: 1844320 8A 160V
+phoenix_contact connector MC_01x13_G_3.5mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-G-3.81_1x13_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/13-G-3.81; number of pins: 13; pin pitch: 3.81mm; Angled || order number: 1803387 8A 160V
+phoenix_contact connector MC_01x13_G_3.81mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-GF-3.5_1x13_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843907 8A 160V
+phoenix_contact connector MC_01x13_GF_3.5mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-GF-3.5_1x13_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843907 8A 160V
+phoenix_contact connector MC_01x13_GF_3.5mm_MH
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-GF-3.81_1x13_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827978 8A 160V
+phoenix_contact connector MC_01x13_GF_3.81mm
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_13-GF-3.81_1x13_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827978 8A 160V
+phoenix_contact connector MC_01x13_GF_3.81mm_MH
+0
+13
+13
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-G-3.5_1x14_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/14-G-3.5; number of pins: 14; pin pitch: 3.50mm; Angled || order number: 1844333 8A 160V
+phoenix_contact connector MC_01x14_G_3.5mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-G-3.81_1x14_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/14-G-3.81; number of pins: 14; pin pitch: 3.81mm; Angled || order number: 1803390 8A 160V
+phoenix_contact connector MC_01x14_G_3.81mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-GF-3.5_1x14_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843910 8A 160V
+phoenix_contact connector MC_01x14_GF_3.5mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-GF-3.5_1x14_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843910 8A 160V
+phoenix_contact connector MC_01x14_GF_3.5mm_MH
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-GF-3.81_1x14_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827981 8A 160V
+phoenix_contact connector MC_01x14_GF_3.81mm
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_14-GF-3.81_1x14_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827981 8A 160V
+phoenix_contact connector MC_01x14_GF_3.81mm_MH
+0
+14
+14
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-G-3.5_1x15_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/15-G-3.5; number of pins: 15; pin pitch: 3.50mm; Angled || order number: 1844346 8A 160V
+phoenix_contact connector MC_01x15_G_3.5mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-G-3.81_1x15_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/15-G-3.81; number of pins: 15; pin pitch: 3.81mm; Angled || order number: 1803400 8A 160V
+phoenix_contact connector MC_01x15_G_3.81mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-GF-3.5_1x15_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843923 8A 160V
+phoenix_contact connector MC_01x15_GF_3.5mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-GF-3.5_1x15_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843923 8A 160V
+phoenix_contact connector MC_01x15_GF_3.5mm_MH
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-GF-3.81_1x15_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827994 8A 160V
+phoenix_contact connector MC_01x15_GF_3.81mm
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_15-GF-3.81_1x15_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827994 8A 160V
+phoenix_contact connector MC_01x15_GF_3.81mm_MH
+0
+15
+15
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-G-3.5_1x16_P3.50mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/16-G-3.5; number of pins: 16; pin pitch: 3.50mm; Angled || order number: 1844359 8A 160V
+phoenix_contact connector MC_01x16_G_3.5mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-G-3.81_1x16_P3.81mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/16-G-3.81; number of pins: 16; pin pitch: 3.81mm; Angled || order number: 1803413 8A 160V
+phoenix_contact connector MC_01x16_G_3.81mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-GF-3.5_1x16_P3.50mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843936 8A 160V
+phoenix_contact connector MC_01x16_GF_3.5mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-GF-3.5_1x16_P3.50mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843936 8A 160V
+phoenix_contact connector MC_01x16_GF_3.5mm_MH
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-GF-3.81_1x16_P3.81mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Angled; threaded flange || order number: 1828003 8A 160V
+phoenix_contact connector MC_01x16_GF_3.81mm
+0
+16
+16
+Connector_Phoenix_MC
+PhoenixContact_MC_1,5_16-GF-3.81_1x16_P3.81mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1828003 8A 160V
+phoenix_contact connector MC_01x16_GF_3.81mm_MH
+0
+16
+16
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical || order number: 1836299 8A 320V
+phoenix_contact connector MCV_01x02_G_5.08mm
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_2-GF-5.08_1x02_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847615 8A 320V
+phoenix_contact connector MCV_01x02_GF_5.08mm
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_2-GF-5.08_1x02_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847615 8A 320V
+phoenix_contact connector MCV_01x02_GF_5.08mm_MH
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical || order number: 1836309 8A 320V
+phoenix_contact connector MCV_01x03_G_5.08mm
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_3-GF-5.08_1x03_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847628 8A 320V
+phoenix_contact connector MCV_01x03_GF_5.08mm
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_3-GF-5.08_1x03_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847628 8A 320V
+phoenix_contact connector MCV_01x03_GF_5.08mm_MH
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_4-G-5.08_1x04_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical || order number: 1836312 8A 320V
+phoenix_contact connector MCV_01x04_G_5.08mm
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_4-GF-5.08_1x04_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847631 8A 320V
+phoenix_contact connector MCV_01x04_GF_5.08mm
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_4-GF-5.08_1x04_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847631 8A 320V
+phoenix_contact connector MCV_01x04_GF_5.08mm_MH
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_5-G-5.08_1x05_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical || order number: 1836325 8A 320V
+phoenix_contact connector MCV_01x05_G_5.08mm
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_5-GF-5.08_1x05_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847644 8A 320V
+phoenix_contact connector MCV_01x05_GF_5.08mm
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_5-GF-5.08_1x05_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847644 8A 320V
+phoenix_contact connector MCV_01x05_GF_5.08mm_MH
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_6-G-5.08_1x06_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical || order number: 1836338 8A 320V
+phoenix_contact connector MCV_01x06_G_5.08mm
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_6-GF-5.08_1x06_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847657 8A 320V
+phoenix_contact connector MCV_01x06_GF_5.08mm
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_6-GF-5.08_1x06_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847657 8A 320V
+phoenix_contact connector MCV_01x06_GF_5.08mm_MH
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_7-G-5.08_1x07_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical || order number: 1836341 8A 320V
+phoenix_contact connector MCV_01x07_G_5.08mm
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_7-GF-5.08_1x07_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847660 8A 320V
+phoenix_contact connector MCV_01x07_GF_5.08mm
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_7-GF-5.08_1x07_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847660 8A 320V
+phoenix_contact connector MCV_01x07_GF_5.08mm_MH
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_8-G-5.08_1x08_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical || order number: 1836354 8A 320V
+phoenix_contact connector MCV_01x08_G_5.08mm
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_8-GF-5.08_1x08_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847673 8A 320V
+phoenix_contact connector MCV_01x08_GF_5.08mm
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_8-GF-5.08_1x08_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847673 8A 320V
+phoenix_contact connector MCV_01x08_GF_5.08mm_MH
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_9-G-5.08_1x09_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical || order number: 1836367 8A 320V
+phoenix_contact connector MCV_01x09_G_5.08mm
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_9-GF-5.08_1x09_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847686 8A 320V
+phoenix_contact connector MCV_01x09_GF_5.08mm
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_9-GF-5.08_1x09_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847686 8A 320V
+phoenix_contact connector MCV_01x09_GF_5.08mm_MH
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_10-G-5.08_1x10_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical || order number: 1836370 8A 320V
+phoenix_contact connector MCV_01x10_G_5.08mm
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_10-GF-5.08_1x10_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847699 8A 320V
+phoenix_contact connector MCV_01x10_GF_5.08mm
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_10-GF-5.08_1x10_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847699 8A 320V
+phoenix_contact connector MCV_01x10_GF_5.08mm_MH
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_11-G-5.08_1x11_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical || order number: 1836383 8A 320V
+phoenix_contact connector MCV_01x11_G_5.08mm
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_11-GF-5.08_1x11_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847709 8A 320V
+phoenix_contact connector MCV_01x11_GF_5.08mm
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_11-GF-5.08_1x11_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847709 8A 320V
+phoenix_contact connector MCV_01x11_GF_5.08mm_MH
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_12-G-5.08_1x12_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical || order number: 1836396 8A 320V
+phoenix_contact connector MCV_01x12_G_5.08mm
+0
+12
+12
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_12-GF-5.08_1x12_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847712 8A 320V
+phoenix_contact connector MCV_01x12_GF_5.08mm
+0
+12
+12
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MCV_1,5_12-GF-5.08_1x12_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847712 8A 320V
+phoenix_contact connector MCV_01x12_GF_5.08mm_MH
+0
+12
+12
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/2-G-5.08; number of pins: 02; pin pitch: 5.08mm; Angled || order number: 1836189 8A 320V
+phoenix_contact connector MC_01x02_G_5.08mm
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_2-GF-5.08_1x02_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847466 8A 320V
+phoenix_contact connector MC_01x02_GF_5.08mm
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_2-GF-5.08_1x02_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847466 8A 320V
+phoenix_contact connector MC_01x02_GF_5.08mm_MH
+0
+2
+2
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_3-G-5.08_1x03_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/3-G-5.08; number of pins: 03; pin pitch: 5.08mm; Angled || order number: 1836192 8A 320V
+phoenix_contact connector MC_01x03_G_5.08mm
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_3-GF-5.08_1x03_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847479 8A 320V
+phoenix_contact connector MC_01x03_GF_5.08mm
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_3-GF-5.08_1x03_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847479 8A 320V
+phoenix_contact connector MC_01x03_GF_5.08mm_MH
+0
+3
+3
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_4-G-5.08_1x04_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/4-G-5.08; number of pins: 04; pin pitch: 5.08mm; Angled || order number: 1836202 8A 320V
+phoenix_contact connector MC_01x04_G_5.08mm
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_4-GF-5.08_1x04_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847482 8A 320V
+phoenix_contact connector MC_01x04_GF_5.08mm
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_4-GF-5.08_1x04_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847482 8A 320V
+phoenix_contact connector MC_01x04_GF_5.08mm_MH
+0
+4
+4
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_5-G-5.08_1x05_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/5-G-5.08; number of pins: 05; pin pitch: 5.08mm; Angled || order number: 1836215 8A 320V
+phoenix_contact connector MC_01x05_G_5.08mm
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_5-GF-5.08_1x05_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847495 8A 320V
+phoenix_contact connector MC_01x05_GF_5.08mm
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_5-GF-5.08_1x05_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847495 8A 320V
+phoenix_contact connector MC_01x05_GF_5.08mm_MH
+0
+5
+5
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_6-G-5.08_1x06_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/6-G-5.08; number of pins: 06; pin pitch: 5.08mm; Angled || order number: 1836228 8A 320V
+phoenix_contact connector MC_01x06_G_5.08mm
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_6-GF-5.08_1x06_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847505 8A 320V
+phoenix_contact connector MC_01x06_GF_5.08mm
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_6-GF-5.08_1x06_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847505 8A 320V
+phoenix_contact connector MC_01x06_GF_5.08mm_MH
+0
+6
+6
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_7-G-5.08_1x07_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/7-G-5.08; number of pins: 07; pin pitch: 5.08mm; Angled || order number: 1836231 8A 320V
+phoenix_contact connector MC_01x07_G_5.08mm
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_7-GF-5.08_1x07_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847518 8A 320V
+phoenix_contact connector MC_01x07_GF_5.08mm
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_7-GF-5.08_1x07_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847518 8A 320V
+phoenix_contact connector MC_01x07_GF_5.08mm_MH
+0
+7
+7
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_8-G-5.08_1x08_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/8-G-5.08; number of pins: 08; pin pitch: 5.08mm; Angled || order number: 1836244 8A 320V
+phoenix_contact connector MC_01x08_G_5.08mm
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_8-GF-5.08_1x08_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847521 8A 320V
+phoenix_contact connector MC_01x08_GF_5.08mm
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_8-GF-5.08_1x08_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847521 8A 320V
+phoenix_contact connector MC_01x08_GF_5.08mm_MH
+0
+8
+8
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_9-G-5.08_1x09_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/9-G-5.08; number of pins: 09; pin pitch: 5.08mm; Angled || order number: 1836257 8A 320V
+phoenix_contact connector MC_01x09_G_5.08mm
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_9-GF-5.08_1x09_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847534 8A 320V
+phoenix_contact connector MC_01x09_GF_5.08mm
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_9-GF-5.08_1x09_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847534 8A 320V
+phoenix_contact connector MC_01x09_GF_5.08mm_MH
+0
+9
+9
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_10-G-5.08_1x10_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/10-G-5.08; number of pins: 10; pin pitch: 5.08mm; Angled || order number: 1836260 8A 320V
+phoenix_contact connector MC_01x10_G_5.08mm
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_10-GF-5.08_1x10_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847547 8A 320V
+phoenix_contact connector MC_01x10_GF_5.08mm
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_10-GF-5.08_1x10_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847547 8A 320V
+phoenix_contact connector MC_01x10_GF_5.08mm_MH
+0
+10
+10
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_11-G-5.08_1x11_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/11-G-5.08; number of pins: 11; pin pitch: 5.08mm; Angled || order number: 1836273 8A 320V
+phoenix_contact connector MC_01x11_G_5.08mm
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_11-GF-5.08_1x11_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847550 8A 320V
+phoenix_contact connector MC_01x11_GF_5.08mm
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_11-GF-5.08_1x11_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847550 8A 320V
+phoenix_contact connector MC_01x11_GF_5.08mm_MH
+0
+11
+11
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_12-G-5.08_1x12_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MC_1,5/12-G-5.08; number of pins: 12; pin pitch: 5.08mm; Angled || order number: 1836286 8A 320V
+phoenix_contact connector MC_01x12_G_5.08mm
+0
+12
+12
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_12-GF-5.08_1x12_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847563 8A 320V
+phoenix_contact connector MC_01x12_GF_5.08mm
+0
+12
+12
+Connector_Phoenix_MC_HighVoltage
+PhoenixContact_MC_1,5_12-GF-5.08_1x12_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847563 8A 320V
+phoenix_contact connector MC_01x12_GF_5.08mm_MH
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/2-G-5,08; number of pins: 02; pin pitch: 5.08mm; Angled || order number: 1757242 12A || order number: 1923869 16A (HC)
+phoenix_contact connector MSTBA_01x02_G_5.08mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/2-G; number of pins: 02; pin pitch: 5.00mm; Angled || order number: 1757475 12A || order number: 1923759 16A (HC)
+phoenix_contact connector MSTBA_01x02_G_5.00mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/3-G-5,08; number of pins: 03; pin pitch: 5.08mm; Angled || order number: 1757255 12A || order number: 1923872 16A (HC)
+phoenix_contact connector MSTBA_01x03_G_5.08mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/3-G; number of pins: 03; pin pitch: 5.00mm; Angled || order number: 1757488 12A || order number: 1923762 16A (HC)
+phoenix_contact connector MSTBA_01x03_G_5.00mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/4-G-5,08; number of pins: 04; pin pitch: 5.08mm; Angled || order number: 1757268 12A || order number: 1923885 16A (HC)
+phoenix_contact connector MSTBA_01x04_G_5.08mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_4-G_1x04_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/4-G; number of pins: 04; pin pitch: 5.00mm; Angled || order number: 1757491 12A || order number: 1923775 16A (HC)
+phoenix_contact connector MSTBA_01x04_G_5.00mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_5-G-5,08_1x05_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/5-G-5,08; number of pins: 05; pin pitch: 5.08mm; Angled || order number: 1757271 12A || order number: 1923898 16A (HC)
+phoenix_contact connector MSTBA_01x05_G_5.08mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_5-G_1x05_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/5-G; number of pins: 05; pin pitch: 5.00mm; Angled || order number: 1757501 12A || order number: 1923788 16A (HC)
+phoenix_contact connector MSTBA_01x05_G_5.00mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_6-G-5,08_1x06_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/6-G-5,08; number of pins: 06; pin pitch: 5.08mm; Angled || order number: 1757284 12A || order number: 1923908 16A (HC)
+phoenix_contact connector MSTBA_01x06_G_5.08mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_6-G_1x06_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/6-G; number of pins: 06; pin pitch: 5.00mm; Angled || order number: 1757514 12A || order number: 1923791 16A (HC)
+phoenix_contact connector MSTBA_01x06_G_5.00mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_7-G-5,08_1x07_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/7-G-5,08; number of pins: 07; pin pitch: 5.08mm; Angled || order number: 1757297 12A || order number: 1923911 16A (HC)
+phoenix_contact connector MSTBA_01x07_G_5.08mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_7-G_1x07_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/7-G; number of pins: 07; pin pitch: 5.00mm; Angled || order number: 1757493 12A || order number: 1923801 16A (HC)
+phoenix_contact connector MSTBA_01x07_G_5.00mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_8-G-5,08_1x08_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/8-G-5,08; number of pins: 08; pin pitch: 5.08mm; Angled || order number: 1757307 12A || order number: 1923924 16A (HC)
+phoenix_contact connector MSTBA_01x08_G_5.08mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_8-G_1x08_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/8-G; number of pins: 08; pin pitch: 5.00mm; Angled || order number: 1757527 12A || order number: 1923814 16A (HC)
+phoenix_contact connector MSTBA_01x08_G_5.00mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_9-G-5,08_1x09_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/9-G-5,08; number of pins: 09; pin pitch: 5.08mm; Angled || order number: 1757310 12A || order number: 1923937 16A (HC)
+phoenix_contact connector MSTBA_01x09_G_5.08mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_9-G_1x09_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/9-G; number of pins: 09; pin pitch: 5.00mm; Angled || order number: 1757530 12A || order number: 1923827 16A (HC)
+phoenix_contact connector MSTBA_01x09_G_5.00mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_10-G-5,08_1x10_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/10-G-5,08; number of pins: 10; pin pitch: 5.08mm; Angled || order number: 1757323 12A || order number: 1923940 16A (HC)
+phoenix_contact connector MSTBA_01x10_G_5.08mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_10-G_1x10_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/10-G; number of pins: 10; pin pitch: 5.00mm; Angled || order number: 1757543 12A || order number: 1923830 16A (HC)
+phoenix_contact connector MSTBA_01x10_G_5.00mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_11-G-5,08_1x11_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/11-G-5,08; number of pins: 11; pin pitch: 5.08mm; Angled || order number: 1757336 12A || order number: 1923953 16A (HC)
+phoenix_contact connector MSTBA_01x11_G_5.08mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_11-G_1x11_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/11-G; number of pins: 11; pin pitch: 5.00mm; Angled || order number: 1757556 12A || order number: 1923843 16A (HC)
+phoenix_contact connector MSTBA_01x11_G_5.00mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_12-G-5,08_1x12_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/12-G-5,08; number of pins: 12; pin pitch: 5.08mm; Angled || order number: 1757349 12A || order number: 1923966 16A (HC)
+phoenix_contact connector MSTBA_01x12_G_5.08mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_12-G_1x12_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/12-G; number of pins: 12; pin pitch: 5.00mm; Angled || order number: 1757569 12A || order number: 1923856 16A (HC)
+phoenix_contact connector MSTBA_01x12_G_5.00mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_13-G-5,08_1x13_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/13-G-5,08; number of pins: 13; pin pitch: 5.08mm; Angled || order number: 1757352 12A
+phoenix_contact connector MSTBA_01x13_G_5.08mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_13-G_1x13_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/13-G; number of pins: 13; pin pitch: 5.00mm; Angled || order number: 1757572 12A
+phoenix_contact connector MSTBA_01x13_G_5.00mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_14-G-5,08_1x14_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/14-G-5,08; number of pins: 14; pin pitch: 5.08mm; Angled || order number: 1757365 12A
+phoenix_contact connector MSTBA_01x14_G_5.08mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_14-G_1x14_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/14-G; number of pins: 14; pin pitch: 5.00mm; Angled || order number: 1757585 12A
+phoenix_contact connector MSTBA_01x14_G_5.00mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_15-G-5,08_1x15_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/15-G-5,08; number of pins: 15; pin pitch: 5.08mm; Angled || order number: 1757378 12A
+phoenix_contact connector MSTBA_01x15_G_5.08mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_15-G_1x15_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/15-G; number of pins: 15; pin pitch: 5.00mm; Angled || order number: 1757598 12A
+phoenix_contact connector MSTBA_01x15_G_5.00mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_16-G-5,08_1x16_P5.08mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/16-G-5,08; number of pins: 16; pin pitch: 5.08mm; Angled || order number: 1757381 12A
+phoenix_contact connector MSTBA_01x16_G_5.08mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBA_2,5_16-G_1x16_P5.00mm_Horizontal
+Generic Phoenix Contact connector footprint for: MSTBA_2,5/16-G; number of pins: 16; pin pitch: 5.00mm; Angled || order number: 1757608 12A
+phoenix_contact connector MSTBA_01x16_G_5.00mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/2-G-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical || order number: 1755736 12A || order number: 1924305 16A (HC)
+phoenix_contact connector MSTBVA_01x02_G_5.08mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/2-G; number of pins: 02; pin pitch: 5.00mm; Vertical || order number: 1755516 12A || order number: 1924198 16A (HC)
+phoenix_contact connector MSTBVA_01x02_G_5.00mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/3-G-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical || order number: 1755749 12A || order number: 1924318 16A (HC)
+phoenix_contact connector MSTBVA_01x03_G_5.08mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_3-G_1x03_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/3-G; number of pins: 03; pin pitch: 5.00mm; Vertical || order number: 1755529 12A || order number: 1924208 16A (HC)
+phoenix_contact connector MSTBVA_01x03_G_5.00mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_4-G-5,08_1x04_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/4-G-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical || order number: 1755752 12A || order number: 1924321 16A (HC)
+phoenix_contact connector MSTBVA_01x04_G_5.08mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_4-G_1x04_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/4-G; number of pins: 04; pin pitch: 5.00mm; Vertical || order number: 1755532 12A || order number: 1924211 16A (HC)
+phoenix_contact connector MSTBVA_01x04_G_5.00mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_5-G-5,08_1x05_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/5-G-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical || order number: 1755765 12A || order number: 1924334 16A (HC)
+phoenix_contact connector MSTBVA_01x05_G_5.08mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_5-G_1x05_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/5-G; number of pins: 05; pin pitch: 5.00mm; Vertical || order number: 1755545 12A || order number: 1924224 16A (HC)
+phoenix_contact connector MSTBVA_01x05_G_5.00mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_6-G-5,08_1x06_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/6-G-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical || order number: 1755778 12A || order number: 1924347 16A (HC)
+phoenix_contact connector MSTBVA_01x06_G_5.08mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_6-G_1x06_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/6-G; number of pins: 06; pin pitch: 5.00mm; Vertical || order number: 1755558 12A || order number: 1924237 16A (HC)
+phoenix_contact connector MSTBVA_01x06_G_5.00mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_7-G-5,08_1x07_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/7-G-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical || order number: 1755781 12A || order number: 1924350 16A (HC)
+phoenix_contact connector MSTBVA_01x07_G_5.08mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_7-G_1x07_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/7-G; number of pins: 07; pin pitch: 5.00mm; Vertical || order number: 1755561 12A || order number: 1924240 16A (HC)
+phoenix_contact connector MSTBVA_01x07_G_5.00mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_8-G-5,08_1x08_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/8-G-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical || order number: 1755794 12A || order number: 1924363 16A (HC)
+phoenix_contact connector MSTBVA_01x08_G_5.08mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_8-G_1x08_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/8-G; number of pins: 08; pin pitch: 5.00mm; Vertical || order number: 1755574 12A || order number: 1924253 16A (HC)
+phoenix_contact connector MSTBVA_01x08_G_5.00mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_9-G-5,08_1x09_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/9-G-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical || order number: 1755804 12A || order number: 1924376 16A (HC)
+phoenix_contact connector MSTBVA_01x09_G_5.08mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_9-G_1x09_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/9-G; number of pins: 09; pin pitch: 5.00mm; Vertical || order number: 1755587 12A || order number: 1924266 16A (HC)
+phoenix_contact connector MSTBVA_01x09_G_5.00mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_10-G-5,08_1x10_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/10-G-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical || order number: 1755817 12A || order number: 1924389 16A (HC)
+phoenix_contact connector MSTBVA_01x10_G_5.08mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_10-G_1x10_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/10-G; number of pins: 10; pin pitch: 5.00mm; Vertical || order number: 1755503 12A || order number: 1924279 16A (HC)
+phoenix_contact connector MSTBVA_01x10_G_5.00mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_11-G-5,08_1x11_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/11-G-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical || order number: 1755820 12A || order number: 1924392 16A (HC)
+phoenix_contact connector MSTBVA_01x11_G_5.08mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_11-G_1x11_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/11-G; number of pins: 11; pin pitch: 5.00mm; Vertical || order number: 1755590 12A || order number: 1924282 16A (HC)
+phoenix_contact connector MSTBVA_01x11_G_5.00mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_12-G-5,08_1x12_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/12-G-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical || order number: 1755833 12A || order number: 1924402 16A (HC)
+phoenix_contact connector MSTBVA_01x12_G_5.08mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_12-G_1x12_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/12-G; number of pins: 12; pin pitch: 5.00mm; Vertical || order number: 1755600 12A || order number: 1924295 16A (HC)
+phoenix_contact connector MSTBVA_01x12_G_5.00mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_13-G-5,08_1x13_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/13-G-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical || order number: 1755846 12A
+phoenix_contact connector MSTBVA_01x13_G_5.08mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_13-G_1x13_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/13-G; number of pins: 13; pin pitch: 5.00mm; Vertical || order number: 1755613 12A
+phoenix_contact connector MSTBVA_01x13_G_5.00mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_14-G-5,08_1x14_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/14-G-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical || order number: 1755859 12A
+phoenix_contact connector MSTBVA_01x14_G_5.08mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_14-G_1x14_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/14-G; number of pins: 14; pin pitch: 5.00mm; Vertical || order number: 1755626 12A
+phoenix_contact connector MSTBVA_01x14_G_5.00mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_15-G-5,08_1x15_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/15-G-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical || order number: 1755862 12A
+phoenix_contact connector MSTBVA_01x15_G_5.08mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_15-G_1x15_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/15-G; number of pins: 15; pin pitch: 5.00mm; Vertical || order number: 1755639 12A
+phoenix_contact connector MSTBVA_01x15_G_5.00mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_16-G-5,08_1x16_P5.08mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/16-G-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical || order number: 1755875 12A
+phoenix_contact connector MSTBVA_01x16_G_5.08mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBVA_2,5_16-G_1x16_P5.00mm_Vertical
+Generic Phoenix Contact connector footprint for: MSTBVA_2,5/16-G; number of pins: 16; pin pitch: 5.00mm; Vertical || order number: 1755642 12A
+phoenix_contact connector MSTBVA_01x16_G_5.00mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_2-GF-5,08_1x02_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777073 12A || order number: 1924525 16A (HC)
+phoenix_contact connector MSTBV_01x02_GF_5.08mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_2-GF-5,08_1x02_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777073 12A || order number: 1924525 16A (HC)
+phoenix_contact connector MSTBV_01x02_GF_5.08mm_MH
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_2-GF_1x02_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776883 12A || order number: 1924415 16A (HC)
+phoenix_contact connector MSTBV_01x02_GF_5.00mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_2-GF_1x02_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776883 12A || order number: 1924415 16A (HC)
+phoenix_contact connector MSTBV_01x02_GF_5.00mm_MH
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_3-GF-5,08_1x03_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777086 12A || order number: 1924538 16A (HC)
+phoenix_contact connector MSTBV_01x03_GF_5.08mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_3-GF-5,08_1x03_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777086 12A || order number: 1924538 16A (HC)
+phoenix_contact connector MSTBV_01x03_GF_5.08mm_MH
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_3-GF_1x03_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776896 12A || order number: 1924428 16A (HC)
+phoenix_contact connector MSTBV_01x03_GF_5.00mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_3-GF_1x03_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776896 12A || order number: 1924428 16A (HC)
+phoenix_contact connector MSTBV_01x03_GF_5.00mm_MH
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_4-GF-5,08_1x04_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777099 12A || order number: 1924541 16A (HC)
+phoenix_contact connector MSTBV_01x04_GF_5.08mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_4-GF-5,08_1x04_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777099 12A || order number: 1924541 16A (HC)
+phoenix_contact connector MSTBV_01x04_GF_5.08mm_MH
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_4-GF_1x04_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776906 12A || order number: 1924431 16A (HC)
+phoenix_contact connector MSTBV_01x04_GF_5.00mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_4-GF_1x04_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776906 12A || order number: 1924431 16A (HC)
+phoenix_contact connector MSTBV_01x04_GF_5.00mm_MH
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_5-GF-5,08_1x05_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777109 12A || order number: 1924554 16A (HC)
+phoenix_contact connector MSTBV_01x05_GF_5.08mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_5-GF-5,08_1x05_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777109 12A || order number: 1924554 16A (HC)
+phoenix_contact connector MSTBV_01x05_GF_5.08mm_MH
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_5-GF_1x05_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776919 12A || order number: 1924444 16A (HC)
+phoenix_contact connector MSTBV_01x05_GF_5.00mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_5-GF_1x05_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776919 12A || order number: 1924444 16A (HC)
+phoenix_contact connector MSTBV_01x05_GF_5.00mm_MH
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_6-GF-5,08_1x06_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777112 12A || order number: 1924567 16A (HC)
+phoenix_contact connector MSTBV_01x06_GF_5.08mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_6-GF-5,08_1x06_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777112 12A || order number: 1924567 16A (HC)
+phoenix_contact connector MSTBV_01x06_GF_5.08mm_MH
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_6-GF_1x06_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776922 12A || order number: 1924457 16A (HC)
+phoenix_contact connector MSTBV_01x06_GF_5.00mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_6-GF_1x06_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776922 12A || order number: 1924457 16A (HC)
+phoenix_contact connector MSTBV_01x06_GF_5.00mm_MH
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_7-GF-5,08_1x07_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777125 12A || order number: 1924570 16A (HC)
+phoenix_contact connector MSTBV_01x07_GF_5.08mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_7-GF-5,08_1x07_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777125 12A || order number: 1924570 16A (HC)
+phoenix_contact connector MSTBV_01x07_GF_5.08mm_MH
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_7-GF_1x07_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776935 12A || order number: 1924460 16A (HC)
+phoenix_contact connector MSTBV_01x07_GF_5.00mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_7-GF_1x07_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776935 12A || order number: 1924460 16A (HC)
+phoenix_contact connector MSTBV_01x07_GF_5.00mm_MH
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_8-GF-5,08_1x08_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777138 12A || order number: 1924583 16A (HC)
+phoenix_contact connector MSTBV_01x08_GF_5.08mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_8-GF-5,08_1x08_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777138 12A || order number: 1924583 16A (HC)
+phoenix_contact connector MSTBV_01x08_GF_5.08mm_MH
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_8-GF_1x08_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776948 12A || order number: 1924473 16A (HC)
+phoenix_contact connector MSTBV_01x08_GF_5.00mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_8-GF_1x08_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776948 12A || order number: 1924473 16A (HC)
+phoenix_contact connector MSTBV_01x08_GF_5.00mm_MH
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_9-GF-5,08_1x09_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777141 12A || order number: 1924596 16A (HC)
+phoenix_contact connector MSTBV_01x09_GF_5.08mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_9-GF-5,08_1x09_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777141 12A || order number: 1924596 16A (HC)
+phoenix_contact connector MSTBV_01x09_GF_5.08mm_MH
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_9-GF_1x09_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776951 12A || order number: 1924486 16A (HC)
+phoenix_contact connector MSTBV_01x09_GF_5.00mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_9-GF_1x09_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776951 12A || order number: 1924486 16A (HC)
+phoenix_contact connector MSTBV_01x09_GF_5.00mm_MH
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_10-GF-5,08_1x10_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777154 12A || order number: 1924606 16A (HC)
+phoenix_contact connector MSTBV_01x10_GF_5.08mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_10-GF-5,08_1x10_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777154 12A || order number: 1924606 16A (HC)
+phoenix_contact connector MSTBV_01x10_GF_5.08mm_MH
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_10-GF_1x10_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776964 12A || order number: 1924499 16A (HC)
+phoenix_contact connector MSTBV_01x10_GF_5.00mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_10-GF_1x10_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776964 12A || order number: 1924499 16A (HC)
+phoenix_contact connector MSTBV_01x10_GF_5.00mm_MH
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_11-GF-5,08_1x11_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777167 12A || order number: 1924619 16A (HC)
+phoenix_contact connector MSTBV_01x11_GF_5.08mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_11-GF-5,08_1x11_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777167 12A || order number: 1924619 16A (HC)
+phoenix_contact connector MSTBV_01x11_GF_5.08mm_MH
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_11-GF_1x11_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776977 12A || order number: 1924509 16A (HC)
+phoenix_contact connector MSTBV_01x11_GF_5.00mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_11-GF_1x11_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776977 12A || order number: 1924509 16A (HC)
+phoenix_contact connector MSTBV_01x11_GF_5.00mm_MH
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_12-GF-5,08_1x12_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777170 12A || order number: 1924622 16A (HC)
+phoenix_contact connector MSTBV_01x12_GF_5.08mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_12-GF-5,08_1x12_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777170 12A || order number: 1924622 16A (HC)
+phoenix_contact connector MSTBV_01x12_GF_5.08mm_MH
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_12-GF_1x12_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776980 12A || order number: 1924512 16A (HC)
+phoenix_contact connector MSTBV_01x12_GF_5.00mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_12-GF_1x12_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776980 12A || order number: 1924512 16A (HC)
+phoenix_contact connector MSTBV_01x12_GF_5.00mm_MH
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_13-GF-5,08_1x13_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777183 12A
+phoenix_contact connector MSTBV_01x13_GF_5.08mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_13-GF-5,08_1x13_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777183 12A
+phoenix_contact connector MSTBV_01x13_GF_5.08mm_MH
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_13-GF_1x13_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776993 12A
+phoenix_contact connector MSTBV_01x13_GF_5.00mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_13-GF_1x13_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776993 12A
+phoenix_contact connector MSTBV_01x13_GF_5.00mm_MH
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_14-GF-5,08_1x14_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777196 12A
+phoenix_contact connector MSTBV_01x14_GF_5.08mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_14-GF-5,08_1x14_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777196 12A
+phoenix_contact connector MSTBV_01x14_GF_5.08mm_MH
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_14-GF_1x14_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776002 12A
+phoenix_contact connector MSTBV_01x14_GF_5.00mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_14-GF_1x14_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776002 12A
+phoenix_contact connector MSTBV_01x14_GF_5.00mm_MH
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_15-GF-5,08_1x15_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777206 12A
+phoenix_contact connector MSTBV_01x15_GF_5.08mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_15-GF-5,08_1x15_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777206 12A
+phoenix_contact connector MSTBV_01x15_GF_5.08mm_MH
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_15-GF_1x15_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776015 12A
+phoenix_contact connector MSTBV_01x15_GF_5.00mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_15-GF_1x15_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776015 12A
+phoenix_contact connector MSTBV_01x15_GF_5.00mm_MH
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_16-GF-5,08_1x16_P5.08mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777219 12A
+phoenix_contact connector MSTBV_01x16_GF_5.08mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_16-GF-5,08_1x16_P5.08mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777219 12A
+phoenix_contact connector MSTBV_01x16_GF_5.08mm_MH
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_16-GF_1x16_P5.00mm_Vertical_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776028 12A
+phoenix_contact connector MSTBV_01x16_GF_5.00mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTBV_2,5_16-GF_1x16_P5.00mm_Vertical_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776028 12A
+phoenix_contact connector MSTBV_01x16_GF_5.00mm_MH
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_2-GF-5,08_1x02_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776508 12A || order number: 1924088 16A (HC)
+phoenix_contact connector MSTB_01x02_GF_5.08mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_2-GF-5,08_1x02_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776508 12A || order number: 1924088 16A (HC)
+phoenix_contact connector MSTB_01x02_GF_5.08mm_MH
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_2-GF_1x02_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776692 12A || order number: 1923979 16A (HC)
+phoenix_contact connector MSTB_01x02_GF_5.00mm
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_2-GF_1x02_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776692 12A || order number: 1923979 16A (HC)
+phoenix_contact connector MSTB_01x02_GF_5.00mm_MH
+0
+2
+2
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_3-GF-5,08_1x03_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776511 12A || order number: 1924091 16A (HC)
+phoenix_contact connector MSTB_01x03_GF_5.08mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_3-GF-5,08_1x03_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776511 12A || order number: 1924091 16A (HC)
+phoenix_contact connector MSTB_01x03_GF_5.08mm_MH
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_3-GF_1x03_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776702 12A || order number: 1923982 16A (HC)
+phoenix_contact connector MSTB_01x03_GF_5.00mm
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_3-GF_1x03_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776702 12A || order number: 1923982 16A (HC)
+phoenix_contact connector MSTB_01x03_GF_5.00mm_MH
+0
+3
+3
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_4-GF-5,08_1x04_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776524 12A || order number: 1924101 16A (HC)
+phoenix_contact connector MSTB_01x04_GF_5.08mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_4-GF-5,08_1x04_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776524 12A || order number: 1924101 16A (HC)
+phoenix_contact connector MSTB_01x04_GF_5.08mm_MH
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_4-GF_1x04_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776715 12A || order number: 1923995 16A (HC)
+phoenix_contact connector MSTB_01x04_GF_5.00mm
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_4-GF_1x04_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776715 12A || order number: 1923995 16A (HC)
+phoenix_contact connector MSTB_01x04_GF_5.00mm_MH
+0
+4
+4
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_5-GF-5,08_1x05_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776537 12A || order number: 1924114 16A (HC)
+phoenix_contact connector MSTB_01x05_GF_5.08mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_5-GF-5,08_1x05_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776537 12A || order number: 1924114 16A (HC)
+phoenix_contact connector MSTB_01x05_GF_5.08mm_MH
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_5-GF_1x05_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776728 12A || order number: 1924004 16A (HC)
+phoenix_contact connector MSTB_01x05_GF_5.00mm
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_5-GF_1x05_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776728 12A || order number: 1924004 16A (HC)
+phoenix_contact connector MSTB_01x05_GF_5.00mm_MH
+0
+5
+5
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_6-GF-5,08_1x06_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776540 12A || order number: 1924127 16A (HC)
+phoenix_contact connector MSTB_01x06_GF_5.08mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_6-GF-5,08_1x06_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776540 12A || order number: 1924127 16A (HC)
+phoenix_contact connector MSTB_01x06_GF_5.08mm_MH
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_6-GF_1x06_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776731 12A || order number: 1924017 16A (HC)
+phoenix_contact connector MSTB_01x06_GF_5.00mm
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_6-GF_1x06_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776731 12A || order number: 1924017 16A (HC)
+phoenix_contact connector MSTB_01x06_GF_5.00mm_MH
+0
+6
+6
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_7-GF-5,08_1x07_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776553 12A || order number: 1924130 16A (HC)
+phoenix_contact connector MSTB_01x07_GF_5.08mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_7-GF-5,08_1x07_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776553 12A || order number: 1924130 16A (HC)
+phoenix_contact connector MSTB_01x07_GF_5.08mm_MH
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_7-GF_1x07_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776744 12A || order number: 1924020 16A (HC)
+phoenix_contact connector MSTB_01x07_GF_5.00mm
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_7-GF_1x07_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776744 12A || order number: 1924020 16A (HC)
+phoenix_contact connector MSTB_01x07_GF_5.00mm_MH
+0
+7
+7
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_8-GF-5,08_1x08_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776566 12A || order number: 1924143 16A (HC)
+phoenix_contact connector MSTB_01x08_GF_5.08mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_8-GF-5,08_1x08_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776566 12A || order number: 1924143 16A (HC)
+phoenix_contact connector MSTB_01x08_GF_5.08mm_MH
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_8-GF_1x08_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776757 12A || order number: 1924033 16A (HC)
+phoenix_contact connector MSTB_01x08_GF_5.00mm
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_8-GF_1x08_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776757 12A || order number: 1924033 16A (HC)
+phoenix_contact connector MSTB_01x08_GF_5.00mm_MH
+0
+8
+8
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_9-GF-5,08_1x09_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776579 12A || order number: 1924156 16A (HC)
+phoenix_contact connector MSTB_01x09_GF_5.08mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_9-GF-5,08_1x09_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776579 12A || order number: 1924156 16A (HC)
+phoenix_contact connector MSTB_01x09_GF_5.08mm_MH
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_9-GF_1x09_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776760 12A || order number: 1924046 16A (HC)
+phoenix_contact connector MSTB_01x09_GF_5.00mm
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_9-GF_1x09_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776760 12A || order number: 1924046 16A (HC)
+phoenix_contact connector MSTB_01x09_GF_5.00mm_MH
+0
+9
+9
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_10-GF-5,08_1x10_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776582 12A || order number: 1924169 16A (HC)
+phoenix_contact connector MSTB_01x10_GF_5.08mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_10-GF-5,08_1x10_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776582 12A || order number: 1924169 16A (HC)
+phoenix_contact connector MSTB_01x10_GF_5.08mm_MH
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_10-GF_1x10_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776773 12A || order number: 1924059 16A (HC)
+phoenix_contact connector MSTB_01x10_GF_5.00mm
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_10-GF_1x10_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776773 12A || order number: 1924059 16A (HC)
+phoenix_contact connector MSTB_01x10_GF_5.00mm_MH
+0
+10
+10
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_11-GF-5,08_1x11_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776595 12A || order number: 1924172 16A (HC)
+phoenix_contact connector MSTB_01x11_GF_5.08mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_11-GF-5,08_1x11_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776595 12A || order number: 1924172 16A (HC)
+phoenix_contact connector MSTB_01x11_GF_5.08mm_MH
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_11-GF_1x11_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776786 12A || order number: 1924062 16A (HC)
+phoenix_contact connector MSTB_01x11_GF_5.00mm
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_11-GF_1x11_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776786 12A || order number: 1924062 16A (HC)
+phoenix_contact connector MSTB_01x11_GF_5.00mm_MH
+0
+11
+11
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_12-GF-5,08_1x12_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776605 12A || order number: 1924185 16A (HC)
+phoenix_contact connector MSTB_01x12_GF_5.08mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_12-GF-5,08_1x12_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776605 12A || order number: 1924185 16A (HC)
+phoenix_contact connector MSTB_01x12_GF_5.08mm_MH
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_12-GF_1x12_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776799 12A || order number: 1924075 16A (HC)
+phoenix_contact connector MSTB_01x12_GF_5.00mm
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_12-GF_1x12_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776799 12A || order number: 1924075 16A (HC)
+phoenix_contact connector MSTB_01x12_GF_5.00mm_MH
+0
+12
+12
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_13-GF-5,08_1x13_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776618 12A
+phoenix_contact connector MSTB_01x13_GF_5.08mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_13-GF-5,08_1x13_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776618 12A
+phoenix_contact connector MSTB_01x13_GF_5.08mm_MH
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_13-GF_1x13_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776809 12A
+phoenix_contact connector MSTB_01x13_GF_5.00mm
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_13-GF_1x13_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776809 12A
+phoenix_contact connector MSTB_01x13_GF_5.00mm_MH
+0
+13
+13
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_14-GF-5,08_1x14_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776621 12A
+phoenix_contact connector MSTB_01x14_GF_5.08mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_14-GF-5,08_1x14_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776621 12A
+phoenix_contact connector MSTB_01x14_GF_5.08mm_MH
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_14-GF_1x14_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776812 12A
+phoenix_contact connector MSTB_01x14_GF_5.00mm
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_14-GF_1x14_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776812 12A
+phoenix_contact connector MSTB_01x14_GF_5.00mm_MH
+0
+14
+14
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_15-GF-5,08_1x15_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776634 12A
+phoenix_contact connector MSTB_01x15_GF_5.08mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_15-GF-5,08_1x15_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776634 12A
+phoenix_contact connector MSTB_01x15_GF_5.08mm_MH
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_15-GF_1x15_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776825 12A
+phoenix_contact connector MSTB_01x15_GF_5.00mm
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_15-GF_1x15_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776825 12A
+phoenix_contact connector MSTB_01x15_GF_5.00mm_MH
+0
+15
+15
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_16-GF-5,08_1x16_P5.08mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776647 12A
+phoenix_contact connector MSTB_01x16_GF_5.08mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_16-GF-5,08_1x16_P5.08mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776647 12A
+phoenix_contact connector MSTB_01x16_GF_5.08mm_MH
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_16-GF_1x16_P5.00mm_Horizontal_ThreadedFlange
+Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776838 12A
+phoenix_contact connector MSTB_01x16_GF_5.00mm
+0
+16
+16
+Connector_Phoenix_MSTB
+PhoenixContact_MSTB_2,5_16-GF_1x16_P5.00mm_Horizontal_ThreadedFlange_MountHole
+Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776838 12A
+phoenix_contact connector MSTB_01x16_GF_5.00mm_MH
+0
+16
+16
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_2-H-3.5_1x02_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/2-H-3.5 Terminal Block, 1990737 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990737), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/2-H-3.5 1990737
+0
+4
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_3-H-3.5_1x03_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/3-H-3.5 Terminal Block, 1990740 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990740), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/3-H-3.5 1990740
+0
+6
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_4-H-3.5_1x04_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/4-H-3.5 Terminal Block, 1990753 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990753), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/4-H-3.5 1990753
+0
+8
+4
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_5-H-3.5_1x05_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/5-H-3.5 Terminal Block, 1990766 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990766), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/5-H-3.5 1990766
+0
+10
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_6-H-3.5_1x06_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/6-H-3.5 Terminal Block, 1990779 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990779), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/6-H-3.5 1990779
+0
+12
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_7-H-3.5_1x07_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/7-H-3.5 Terminal Block, 1990782 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990782), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/7-H-3.5 1990782
+0
+14
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_8-H-3.5_1x08_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/8-H-3.5 Terminal Block, 1990795 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990795), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/8-H-3.5 1990795
+0
+16
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_9-H-3.5_1x09_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/9-H-3.5 Terminal Block, 1990805 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990805), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/9-H-3.5 1990805
+0
+18
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_10-H-3.5_1x10_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/10-H-3.5 Terminal Block, 1990818 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990818), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/10-H-3.5 1990818
+0
+20
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_11-H-3.5_1x11_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/11-H-3.5 Terminal Block, 1990821 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990821), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/11-H-3.5 1990821
+0
+22
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_1.5_12-H-3.5_1x12_P3.5mm_Horizontal
+Connector Phoenix Contact, SPT 1.5/12-H-3.5 Terminal Block, 1990834 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990834), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 1.5/12-H-3.5 1990834
+0
+24
+12
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_1-H-5.0_1x01_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/1-H-5.0 Terminal Block, 1751066 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1751066), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/1-H-5.0 1751066
+0
+2
+1
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_2-H-5.0-EX_1x02_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/2-H-5.0-EX Terminal Block, 1732386 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732386), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/2-H-5.0-EX 1732386
+0
+4
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_2-H-5.0_1x02_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/2-H-5.0 Terminal Block, 1990973 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990973), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/2-H-5.0 1990973
+0
+4
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_2-V-5.0-EX_1x02_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/2-V-5.0-EX Terminal Block, 1732496 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732496), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/2-V-5.0-EX 1732496
+0
+4
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_3-H-5.0-EX_1x03_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/3-H-5.0-EX Terminal Block, 1732399 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732399), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/3-H-5.0-EX 1732399
+0
+6
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_3-H-5.0_1x03_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/3-H-5.0 Terminal Block, 1990986 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990986), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/3-H-5.0 1990986
+0
+6
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_3-V-5.0-EX_1x03_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/3-V-5.0-EX Terminal Block, 1732506 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732506), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/3-V-5.0-EX 1732506
+0
+6
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_4-H-5.0-EX_1x04_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/4-H-5.0-EX Terminal Block, 1732409 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732409), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/4-H-5.0-EX 1732409
+0
+8
+4
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_4-H-5.0_1x04_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/4-H-5.0 Terminal Block, 1990999 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990999), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/4-H-5.0 1990999
+0
+8
+4
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_4-V-5.0-EX_1x04_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/4-V-5.0-EX Terminal Block, 1732519 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732519), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/4-V-5.0-EX 1732519
+0
+8
+4
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_5-H-5.0-EX_1x05_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/5-H-5.0-EX Terminal Block, 1732412 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732412), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/5-H-5.0-EX 1732412
+0
+10
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_5-H-5.0_1x05_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/5-H-5.0 Terminal Block, 1991008 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991008), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/5-H-5.0 1991008
+0
+10
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_5-V-5.0-EX_1x05_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/5-V-5.0-EX Terminal Block, 1732522 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732522), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/5-V-5.0-EX 1732522
+0
+10
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_6-H-5.0-EX_1x06_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/6-H-5.0-EX Terminal Block, 1732425 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732425), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/6-H-5.0-EX 1732425
+0
+12
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_6-H-5.0_1x06_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/6-H-5.0 Terminal Block, 1991011 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991011), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/6-H-5.0 1991011
+0
+12
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_6-V-5.0-EX_1x06_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/6-V-5.0-EX Terminal Block, 1732535 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732535), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/6-V-5.0-EX 1732535
+0
+12
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_7-H-5.0-EX_1x07_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/7-H-5.0-EX Terminal Block, 1732438 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732438), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/7-H-5.0-EX 1732438
+0
+14
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_7-H-5.0_1x07_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/7-H-5.0 Terminal Block, 1991024 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991024), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/7-H-5.0 1991024
+0
+14
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_7-V-5.0-EX_1x07_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/7-V-5.0-EX Terminal Block, 1732548 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732548), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/7-V-5.0-EX 1732548
+0
+14
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_8-H-5.0-EX_1x08_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/8-H-5.0-EX Terminal Block, 1732441 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732441), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/8-H-5.0-EX 1732441
+0
+16
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_8-H-5.0_1x08_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/8-H-5.0 Terminal Block, 1991037 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991037), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/8-H-5.0 1991037
+0
+16
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_8-V-5.0-EX_1x08_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/8-V-5.0-EX Terminal Block, 1732551 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732551), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/8-V-5.0-EX 1732551
+0
+16
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_9-H-5.0-EX_1x09_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/9-H-5.0-EX Terminal Block, 1732454 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732454), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/9-H-5.0-EX 1732454
+0
+18
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_9-H-5.0_1x09_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/9-H-5.0 Terminal Block, 1991040 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991040), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/9-H-5.0 1991040
+0
+18
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_9-V-5.0-EX_1x09_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/9-V-5.0-EX Terminal Block, 1732564 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732564), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/9-V-5.0-EX 1732564
+0
+18
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_10-H-5.0-EX_1x10_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/10-H-5.0-EX Terminal Block, 1732467 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732467), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/10-H-5.0-EX 1732467
+0
+20
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_10-H-5.0_1x10_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/10-H-5.0 Terminal Block, 1991053 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991053), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/10-H-5.0 1991053
+0
+20
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_10-V-5.0-EX_1x10_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/10-V-5.0-EX Terminal Block, 1732577 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732577), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/10-V-5.0-EX 1732577
+0
+20
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_11-H-5.0-EX_1x11_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/11-H-5.0-EX Terminal Block, 1732470 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732470), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/11-H-5.0-EX 1732470
+0
+22
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_11-H-5.0_1x11_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/11-H-5.0 Terminal Block, 1991066 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991066), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/11-H-5.0 1991066
+0
+22
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_11-V-5.0-EX_1x11_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/11-V-5.0-EX Terminal Block, 1732580 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732580), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/11-V-5.0-EX 1732580
+0
+22
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_12-H-5.0-EX_1x12_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/12-H-5.0-EX Terminal Block, 1732483 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732483), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/12-H-5.0-EX 1732483
+0
+24
+12
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_12-H-5.0_1x12_P5.0mm_Horizontal
+Connector Phoenix Contact, SPT 2.5/12-H-5.0 Terminal Block, 1991079 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991079), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/12-H-5.0 1991079
+0
+24
+12
+Connector_Phoenix_SPT
+PhoenixContact_SPT_2.5_12-V-5.0-EX_1x12_P5.0mm_Vertical
+Connector Phoenix Contact, SPT 2.5/12-V-5.0-EX Terminal Block, 1732593 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732593), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 2.5/12-V-5.0-EX 1732593
+0
+24
+12
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_1-H-7.5_1x01_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/1-H-7.5 Terminal Block, 1719189 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719189), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/1-H-7.5 1719189
+0
+2
+1
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_1-V-7.5_1x01_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/1-V-7.5 Terminal Block, 1719309 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719309), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/1-V-7.5 1719309
+0
+2
+1
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_2-H-7.5-ZB_1x02_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/2-H-7.5-ZB Terminal Block, 1719192 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719192), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/2-H-7.5-ZB 1719192
+0
+2
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_2-V-7.5_1x02_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/2-V-7.5 Terminal Block, 1738144 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1738144), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/2-V-7.5 1738144
+0
+4
+2
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_3-H-7.5-ZB_1x03_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/3-H-7.5-ZB Terminal Block, 1719202 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719202), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/3-H-7.5-ZB 1719202
+0
+3
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_3-H-7.5_1x03_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/3-H-7.5 Terminal Block, 1701361 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1701361), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/3-H-7.5 1701361
+0
+6
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_3-V-7.5-ZB_1x03_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/3-V-7.5-ZB Terminal Block, 1719325 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719325), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/3-V-7.5-ZB 1719325
+0
+3
+3
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_4-H-7.5-ZB_1x04_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/4-H-7.5-ZB Terminal Block, 1719215 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719215), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/4-H-7.5-ZB 1719215
+0
+4
+4
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_5-H-7.5-ZB_1x05_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/5-H-7.5-ZB Terminal Block, 1719228 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719228), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/5-H-7.5-ZB 1719228
+0
+5
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_5-V-7.5-ZB_1x05_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/5-V-7.5-ZB Terminal Block, 1719341 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719341), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/5-V-7.5-ZB 1719341
+0
+5
+5
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_6-H-7.5-ZB_1x06_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/6-H-7.5-ZB Terminal Block, 1719231 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719231), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/6-H-7.5-ZB 1719231
+0
+6
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_6-V-7.5-ZB_1x06_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/6-V-7.5-ZB Terminal Block, 1719354 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719354), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/6-V-7.5-ZB 1719354
+0
+6
+6
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_7-H-7.5-ZB_1x07_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/7-H-7.5-ZB Terminal Block, 1719244 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719244), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/7-H-7.5-ZB 1719244
+0
+7
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_7-V-7.5-ZB_1x07_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/7-V-7.5-ZB Terminal Block, 1719367 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719367), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/7-V-7.5-ZB 1719367
+0
+7
+7
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_8-H-7.5-ZB_1x08_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/8-H-7.5-ZB Terminal Block, 1719257 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719257), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/8-H-7.5-ZB 1719257
+0
+8
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_8-V-7.5-ZB_1x08_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/8-V-7.5-ZB Terminal Block, 1719370 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719370), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/8-V-7.5-ZB 1719370
+0
+8
+8
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_9-H-7.5-ZB_1x09_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/9-H-7.5-ZB Terminal Block, 1719260 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719260), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/9-H-7.5-ZB 1719260
+0
+9
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_9-V-7.5-ZB_1x09_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/9-V-7.5-ZB Terminal Block, 1719383 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719383), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/9-V-7.5-ZB 1719383
+0
+9
+9
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_10-H-7.5-ZB_1x10_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/10-H-7.5-ZB Terminal Block, 1719273 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719273), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/10-H-7.5-ZB 1719273
+0
+10
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_10-V-7.5-ZB_1x10_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/10-V-7.5-ZB Terminal Block, 1719396 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719396), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/10-V-7.5-ZB 1719396
+0
+10
+10
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_11-H-7.5-ZB_1x11_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/11-H-7.5-ZB Terminal Block, 1719286 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719286), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/11-H-7.5-ZB 1719286
+0
+11
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_11-V-7.5-ZB_1x11_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/11-V-7.5-ZB Terminal Block, 1719406 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719406), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/11-V-7.5-ZB 1719406
+0
+11
+11
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_12-H-7.5-ZB_1x12_P7.5mm_Horizontal
+Connector Phoenix Contact, SPT 5/12-H-7.5-ZB Terminal Block, 1719299 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719299), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/12-H-7.5-ZB 1719299
+0
+12
+12
+Connector_Phoenix_SPT
+PhoenixContact_SPT_5_12-V-7.5-ZB_1x12_P7.5mm_Vertical
+Connector Phoenix Contact, SPT 5/12-V-7.5-ZB Terminal Block, 1719419 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719419), generated with kicad-footprint-generator
+Connector Phoenix Contact SPT 5/12-V-7.5-ZB 1719419
+0
+12
+12
+Connector_Pin
+Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork
+solder Pin_ with flat fork, hole diameter 0.7mm, length 6.5mm, width 1.8mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork
+solder Pin_ with flat fork, hole diameter 0.9mm, length 10.0mm, width 2.4mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.0mm_L10.0mm
+solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm
+solder Pin_ press fit
+0
+1
+1
+Connector_Pin
+Pin_D1.0mm_L10.0mm_LooseFit
+solder Pin_ diameter 1.0mm, hole diameter 1.2mm (loose fit), length 10.0mm
+solder Pin_ loose fit
+0
+1
+1
+Connector_Pin
+Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork
+solder Pin_ with flat fork, hole diameter 1.1mm, length 8.5mm, width 2.5mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.1mm_L10.2mm_W3.5mm_Flat
+solder Pin_ with flat with hole, hole diameter 1.1mm, length 10.2mm, width 3.5mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.2mm_L10.2mm_W2.9mm_FlatFork
+solder Pin_ with flat with fork, hole diameter 1.2mm, length 11.3mm, width 3.0mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.2mm_L11.3mm_W3.0mm_Flat
+solder Pin_ with flat with hole, hole diameter 1.2mm, length 11.3mm, width 3.0mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.3mm_L10.0mm_W3.5mm_Flat
+solder Pin_ with flat with hole, hole diameter 1.3mm, length 10.0mm, width 3.5mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.3mm_L11.0mm
+solder Pin_ diameter 1.3mm, hole diameter 1.3mm, length 11.0mm
+solder Pin_ pressfit
+0
+1
+1
+Connector_Pin
+Pin_D1.3mm_L11.0mm_LooseFit
+solder Pin_ diameter 1.3mm, hole diameter 1.5mm (loose fit), length 11.0mm
+solder Pin_ loose fit
+0
+1
+1
+Connector_Pin
+Pin_D1.3mm_L11.3mm_W2.8mm_Flat
+solder Pin_ with flat with hole, hole diameter 1.3mm, length 11.3mm, width 2.8mm
+solder Pin_ with flat fork
+0
+1
+1
+Connector_Pin
+Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork
+solder Pin_ with flat with fork, hole diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.890, https://katalog.ettinger.de/#p=434
+solder Pin_ with flat fork
+0
+1
+1
+Connector_PinHeader_1.00mm
+PinHeader_1x01_P1.00mm_Horizontal
+Through hole angled pin header, 1x01, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x01 1.00mm single row
+0
+1
+1
+Connector_PinHeader_1.00mm
+PinHeader_1x01_P1.00mm_Vertical
+Through hole straight pin header, 1x01, 1.00mm pitch, single row
+Through hole pin header THT 1x01 1.00mm single row
+0
+1
+1
+Connector_PinHeader_1.00mm
+PinHeader_1x02_P1.00mm_Horizontal
+Through hole angled pin header, 1x02, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x02 1.00mm single row
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_1x02_P1.00mm_Vertical
+Through hole straight pin header, 1x02, 1.00mm pitch, single row
+Through hole pin header THT 1x02 1.00mm single row
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x02, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x02 1.00mm single row style1 pin1 left
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x02, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x02 1.00mm single row style2 pin1 right
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_1x03_P1.00mm_Horizontal
+Through hole angled pin header, 1x03, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x03 1.00mm single row
+0
+3
+3
+Connector_PinHeader_1.00mm
+PinHeader_1x03_P1.00mm_Vertical
+Through hole straight pin header, 1x03, 1.00mm pitch, single row
+Through hole pin header THT 1x03 1.00mm single row
+0
+3
+3
+Connector_PinHeader_1.00mm
+PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x03, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x03 1.00mm single row style1 pin1 left
+0
+3
+3
+Connector_PinHeader_1.00mm
+PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x03, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x03 1.00mm single row style2 pin1 right
+0
+3
+3
+Connector_PinHeader_1.00mm
+PinHeader_1x04_P1.00mm_Horizontal
+Through hole angled pin header, 1x04, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x04 1.00mm single row
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_1x04_P1.00mm_Vertical
+Through hole straight pin header, 1x04, 1.00mm pitch, single row
+Through hole pin header THT 1x04 1.00mm single row
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x04, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x04 1.00mm single row style1 pin1 left
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x04, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x04 1.00mm single row style2 pin1 right
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_1x05_P1.00mm_Horizontal
+Through hole angled pin header, 1x05, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x05 1.00mm single row
+0
+5
+5
+Connector_PinHeader_1.00mm
+PinHeader_1x05_P1.00mm_Vertical
+Through hole straight pin header, 1x05, 1.00mm pitch, single row
+Through hole pin header THT 1x05 1.00mm single row
+0
+5
+5
+Connector_PinHeader_1.00mm
+PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x05, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x05 1.00mm single row style1 pin1 left
+0
+5
+5
+Connector_PinHeader_1.00mm
+PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x05, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x05 1.00mm single row style2 pin1 right
+0
+5
+5
+Connector_PinHeader_1.00mm
+PinHeader_1x06_P1.00mm_Horizontal
+Through hole angled pin header, 1x06, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x06 1.00mm single row
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_1x06_P1.00mm_Vertical
+Through hole straight pin header, 1x06, 1.00mm pitch, single row
+Through hole pin header THT 1x06 1.00mm single row
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x06, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x06 1.00mm single row style1 pin1 left
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x06, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x06 1.00mm single row style2 pin1 right
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_1x07_P1.00mm_Horizontal
+Through hole angled pin header, 1x07, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x07 1.00mm single row
+0
+7
+7
+Connector_PinHeader_1.00mm
+PinHeader_1x07_P1.00mm_Vertical
+Through hole straight pin header, 1x07, 1.00mm pitch, single row
+Through hole pin header THT 1x07 1.00mm single row
+0
+7
+7
+Connector_PinHeader_1.00mm
+PinHeader_1x07_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x07, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x07 1.00mm single row style1 pin1 left
+0
+7
+7
+Connector_PinHeader_1.00mm
+PinHeader_1x07_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x07, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x07 1.00mm single row style2 pin1 right
+0
+7
+7
+Connector_PinHeader_1.00mm
+PinHeader_1x08_P1.00mm_Horizontal
+Through hole angled pin header, 1x08, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x08 1.00mm single row
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_1x08_P1.00mm_Vertical
+Through hole straight pin header, 1x08, 1.00mm pitch, single row
+Through hole pin header THT 1x08 1.00mm single row
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_1x08_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x08, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x08 1.00mm single row style1 pin1 left
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_1x08_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x08, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x08 1.00mm single row style2 pin1 right
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_1x09_P1.00mm_Horizontal
+Through hole angled pin header, 1x09, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x09 1.00mm single row
+0
+9
+9
+Connector_PinHeader_1.00mm
+PinHeader_1x09_P1.00mm_Vertical
+Through hole straight pin header, 1x09, 1.00mm pitch, single row
+Through hole pin header THT 1x09 1.00mm single row
+0
+9
+9
+Connector_PinHeader_1.00mm
+PinHeader_1x09_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x09, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x09 1.00mm single row style1 pin1 left
+0
+9
+9
+Connector_PinHeader_1.00mm
+PinHeader_1x09_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x09, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x09 1.00mm single row style2 pin1 right
+0
+9
+9
+Connector_PinHeader_1.00mm
+PinHeader_1x10_P1.00mm_Horizontal
+Through hole angled pin header, 1x10, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x10 1.00mm single row
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_1x10_P1.00mm_Vertical
+Through hole straight pin header, 1x10, 1.00mm pitch, single row
+Through hole pin header THT 1x10 1.00mm single row
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_1x10_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x10, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x10 1.00mm single row style1 pin1 left
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_1x10_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x10, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x10 1.00mm single row style2 pin1 right
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_1x11_P1.00mm_Horizontal
+Through hole angled pin header, 1x11, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x11 1.00mm single row
+0
+11
+11
+Connector_PinHeader_1.00mm
+PinHeader_1x11_P1.00mm_Vertical
+Through hole straight pin header, 1x11, 1.00mm pitch, single row
+Through hole pin header THT 1x11 1.00mm single row
+0
+11
+11
+Connector_PinHeader_1.00mm
+PinHeader_1x11_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x11, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x11 1.00mm single row style1 pin1 left
+0
+11
+11
+Connector_PinHeader_1.00mm
+PinHeader_1x11_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x11, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x11 1.00mm single row style2 pin1 right
+0
+11
+11
+Connector_PinHeader_1.00mm
+PinHeader_1x12_P1.00mm_Horizontal
+Through hole angled pin header, 1x12, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x12 1.00mm single row
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_1x12_P1.00mm_Vertical
+Through hole straight pin header, 1x12, 1.00mm pitch, single row
+Through hole pin header THT 1x12 1.00mm single row
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_1x12_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x12, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x12 1.00mm single row style1 pin1 left
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_1x12_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x12, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x12 1.00mm single row style2 pin1 right
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_1x13_P1.00mm_Horizontal
+Through hole angled pin header, 1x13, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x13 1.00mm single row
+0
+13
+13
+Connector_PinHeader_1.00mm
+PinHeader_1x13_P1.00mm_Vertical
+Through hole straight pin header, 1x13, 1.00mm pitch, single row
+Through hole pin header THT 1x13 1.00mm single row
+0
+13
+13
+Connector_PinHeader_1.00mm
+PinHeader_1x13_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x13, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x13 1.00mm single row style1 pin1 left
+0
+13
+13
+Connector_PinHeader_1.00mm
+PinHeader_1x13_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x13, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x13 1.00mm single row style2 pin1 right
+0
+13
+13
+Connector_PinHeader_1.00mm
+PinHeader_1x14_P1.00mm_Horizontal
+Through hole angled pin header, 1x14, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x14 1.00mm single row
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_1x14_P1.00mm_Vertical
+Through hole straight pin header, 1x14, 1.00mm pitch, single row
+Through hole pin header THT 1x14 1.00mm single row
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_1x14_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x14, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x14 1.00mm single row style1 pin1 left
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_1x14_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x14, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x14 1.00mm single row style2 pin1 right
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_1x15_P1.00mm_Horizontal
+Through hole angled pin header, 1x15, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x15 1.00mm single row
+0
+15
+15
+Connector_PinHeader_1.00mm
+PinHeader_1x15_P1.00mm_Vertical
+Through hole straight pin header, 1x15, 1.00mm pitch, single row
+Through hole pin header THT 1x15 1.00mm single row
+0
+15
+15
+Connector_PinHeader_1.00mm
+PinHeader_1x15_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x15, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x15 1.00mm single row style1 pin1 left
+0
+15
+15
+Connector_PinHeader_1.00mm
+PinHeader_1x15_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x15, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x15 1.00mm single row style2 pin1 right
+0
+15
+15
+Connector_PinHeader_1.00mm
+PinHeader_1x16_P1.00mm_Horizontal
+Through hole angled pin header, 1x16, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x16 1.00mm single row
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_1x16_P1.00mm_Vertical
+Through hole straight pin header, 1x16, 1.00mm pitch, single row
+Through hole pin header THT 1x16 1.00mm single row
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_1x16_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x16, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x16 1.00mm single row style1 pin1 left
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_1x16_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x16, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x16 1.00mm single row style2 pin1 right
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_1x17_P1.00mm_Horizontal
+Through hole angled pin header, 1x17, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x17 1.00mm single row
+0
+17
+17
+Connector_PinHeader_1.00mm
+PinHeader_1x17_P1.00mm_Vertical
+Through hole straight pin header, 1x17, 1.00mm pitch, single row
+Through hole pin header THT 1x17 1.00mm single row
+0
+17
+17
+Connector_PinHeader_1.00mm
+PinHeader_1x17_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x17, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x17 1.00mm single row style1 pin1 left
+0
+17
+17
+Connector_PinHeader_1.00mm
+PinHeader_1x17_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x17, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x17 1.00mm single row style2 pin1 right
+0
+17
+17
+Connector_PinHeader_1.00mm
+PinHeader_1x18_P1.00mm_Horizontal
+Through hole angled pin header, 1x18, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x18 1.00mm single row
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_1x18_P1.00mm_Vertical
+Through hole straight pin header, 1x18, 1.00mm pitch, single row
+Through hole pin header THT 1x18 1.00mm single row
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_1x18_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x18, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x18 1.00mm single row style1 pin1 left
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_1x18_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x18, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x18 1.00mm single row style2 pin1 right
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_1x19_P1.00mm_Horizontal
+Through hole angled pin header, 1x19, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x19 1.00mm single row
+0
+19
+19
+Connector_PinHeader_1.00mm
+PinHeader_1x19_P1.00mm_Vertical
+Through hole straight pin header, 1x19, 1.00mm pitch, single row
+Through hole pin header THT 1x19 1.00mm single row
+0
+19
+19
+Connector_PinHeader_1.00mm
+PinHeader_1x19_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x19, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x19 1.00mm single row style1 pin1 left
+0
+19
+19
+Connector_PinHeader_1.00mm
+PinHeader_1x19_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x19, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x19 1.00mm single row style2 pin1 right
+0
+19
+19
+Connector_PinHeader_1.00mm
+PinHeader_1x20_P1.00mm_Horizontal
+Through hole angled pin header, 1x20, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x20 1.00mm single row
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_1x20_P1.00mm_Vertical
+Through hole straight pin header, 1x20, 1.00mm pitch, single row
+Through hole pin header THT 1x20 1.00mm single row
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_1x20_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x20, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x20 1.00mm single row style1 pin1 left
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_1x20_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x20, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x20 1.00mm single row style2 pin1 right
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_1x21_P1.00mm_Horizontal
+Through hole angled pin header, 1x21, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x21 1.00mm single row
+0
+21
+21
+Connector_PinHeader_1.00mm
+PinHeader_1x21_P1.00mm_Vertical
+Through hole straight pin header, 1x21, 1.00mm pitch, single row
+Through hole pin header THT 1x21 1.00mm single row
+0
+21
+21
+Connector_PinHeader_1.00mm
+PinHeader_1x21_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x21, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x21 1.00mm single row style1 pin1 left
+0
+21
+21
+Connector_PinHeader_1.00mm
+PinHeader_1x21_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x21, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x21 1.00mm single row style2 pin1 right
+0
+21
+21
+Connector_PinHeader_1.00mm
+PinHeader_1x22_P1.00mm_Horizontal
+Through hole angled pin header, 1x22, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x22 1.00mm single row
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_1x22_P1.00mm_Vertical
+Through hole straight pin header, 1x22, 1.00mm pitch, single row
+Through hole pin header THT 1x22 1.00mm single row
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_1x22_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x22, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x22 1.00mm single row style1 pin1 left
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_1x22_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x22, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x22 1.00mm single row style2 pin1 right
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_1x23_P1.00mm_Horizontal
+Through hole angled pin header, 1x23, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x23 1.00mm single row
+0
+23
+23
+Connector_PinHeader_1.00mm
+PinHeader_1x23_P1.00mm_Vertical
+Through hole straight pin header, 1x23, 1.00mm pitch, single row
+Through hole pin header THT 1x23 1.00mm single row
+0
+23
+23
+Connector_PinHeader_1.00mm
+PinHeader_1x23_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x23, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x23 1.00mm single row style1 pin1 left
+0
+23
+23
+Connector_PinHeader_1.00mm
+PinHeader_1x23_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x23, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x23 1.00mm single row style2 pin1 right
+0
+23
+23
+Connector_PinHeader_1.00mm
+PinHeader_1x24_P1.00mm_Horizontal
+Through hole angled pin header, 1x24, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x24 1.00mm single row
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_1x24_P1.00mm_Vertical
+Through hole straight pin header, 1x24, 1.00mm pitch, single row
+Through hole pin header THT 1x24 1.00mm single row
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_1x24_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x24, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x24 1.00mm single row style1 pin1 left
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_1x24_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x24, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x24 1.00mm single row style2 pin1 right
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_1x25_P1.00mm_Horizontal
+Through hole angled pin header, 1x25, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x25 1.00mm single row
+0
+25
+25
+Connector_PinHeader_1.00mm
+PinHeader_1x25_P1.00mm_Vertical
+Through hole straight pin header, 1x25, 1.00mm pitch, single row
+Through hole pin header THT 1x25 1.00mm single row
+0
+25
+25
+Connector_PinHeader_1.00mm
+PinHeader_1x25_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x25, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x25 1.00mm single row style1 pin1 left
+0
+25
+25
+Connector_PinHeader_1.00mm
+PinHeader_1x25_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x25, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x25 1.00mm single row style2 pin1 right
+0
+25
+25
+Connector_PinHeader_1.00mm
+PinHeader_1x26_P1.00mm_Horizontal
+Through hole angled pin header, 1x26, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x26 1.00mm single row
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_1x26_P1.00mm_Vertical
+Through hole straight pin header, 1x26, 1.00mm pitch, single row
+Through hole pin header THT 1x26 1.00mm single row
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_1x26_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x26, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x26 1.00mm single row style1 pin1 left
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_1x26_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x26, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x26 1.00mm single row style2 pin1 right
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_1x27_P1.00mm_Horizontal
+Through hole angled pin header, 1x27, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x27 1.00mm single row
+0
+27
+27
+Connector_PinHeader_1.00mm
+PinHeader_1x27_P1.00mm_Vertical
+Through hole straight pin header, 1x27, 1.00mm pitch, single row
+Through hole pin header THT 1x27 1.00mm single row
+0
+27
+27
+Connector_PinHeader_1.00mm
+PinHeader_1x27_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x27, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x27 1.00mm single row style1 pin1 left
+0
+27
+27
+Connector_PinHeader_1.00mm
+PinHeader_1x27_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x27, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x27 1.00mm single row style2 pin1 right
+0
+27
+27
+Connector_PinHeader_1.00mm
+PinHeader_1x28_P1.00mm_Horizontal
+Through hole angled pin header, 1x28, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x28 1.00mm single row
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_1x28_P1.00mm_Vertical
+Through hole straight pin header, 1x28, 1.00mm pitch, single row
+Through hole pin header THT 1x28 1.00mm single row
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_1x28_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x28, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x28 1.00mm single row style1 pin1 left
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_1x28_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x28, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x28 1.00mm single row style2 pin1 right
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_1x29_P1.00mm_Horizontal
+Through hole angled pin header, 1x29, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x29 1.00mm single row
+0
+29
+29
+Connector_PinHeader_1.00mm
+PinHeader_1x29_P1.00mm_Vertical
+Through hole straight pin header, 1x29, 1.00mm pitch, single row
+Through hole pin header THT 1x29 1.00mm single row
+0
+29
+29
+Connector_PinHeader_1.00mm
+PinHeader_1x29_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x29, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x29 1.00mm single row style1 pin1 left
+0
+29
+29
+Connector_PinHeader_1.00mm
+PinHeader_1x29_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x29, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x29 1.00mm single row style2 pin1 right
+0
+29
+29
+Connector_PinHeader_1.00mm
+PinHeader_1x30_P1.00mm_Horizontal
+Through hole angled pin header, 1x30, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x30 1.00mm single row
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_1x30_P1.00mm_Vertical
+Through hole straight pin header, 1x30, 1.00mm pitch, single row
+Through hole pin header THT 1x30 1.00mm single row
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_1x30_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x30, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x30 1.00mm single row style1 pin1 left
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_1x30_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x30, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x30 1.00mm single row style2 pin1 right
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_1x31_P1.00mm_Horizontal
+Through hole angled pin header, 1x31, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x31 1.00mm single row
+0
+31
+31
+Connector_PinHeader_1.00mm
+PinHeader_1x31_P1.00mm_Vertical
+Through hole straight pin header, 1x31, 1.00mm pitch, single row
+Through hole pin header THT 1x31 1.00mm single row
+0
+31
+31
+Connector_PinHeader_1.00mm
+PinHeader_1x31_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x31, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x31 1.00mm single row style1 pin1 left
+0
+31
+31
+Connector_PinHeader_1.00mm
+PinHeader_1x31_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x31, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x31 1.00mm single row style2 pin1 right
+0
+31
+31
+Connector_PinHeader_1.00mm
+PinHeader_1x32_P1.00mm_Horizontal
+Through hole angled pin header, 1x32, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x32 1.00mm single row
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_1x32_P1.00mm_Vertical
+Through hole straight pin header, 1x32, 1.00mm pitch, single row
+Through hole pin header THT 1x32 1.00mm single row
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_1x32_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x32, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x32 1.00mm single row style1 pin1 left
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_1x32_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x32, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x32 1.00mm single row style2 pin1 right
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_1x33_P1.00mm_Horizontal
+Through hole angled pin header, 1x33, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x33 1.00mm single row
+0
+33
+33
+Connector_PinHeader_1.00mm
+PinHeader_1x33_P1.00mm_Vertical
+Through hole straight pin header, 1x33, 1.00mm pitch, single row
+Through hole pin header THT 1x33 1.00mm single row
+0
+33
+33
+Connector_PinHeader_1.00mm
+PinHeader_1x33_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x33, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x33 1.00mm single row style1 pin1 left
+0
+33
+33
+Connector_PinHeader_1.00mm
+PinHeader_1x33_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x33, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x33 1.00mm single row style2 pin1 right
+0
+33
+33
+Connector_PinHeader_1.00mm
+PinHeader_1x34_P1.00mm_Horizontal
+Through hole angled pin header, 1x34, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x34 1.00mm single row
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_1x34_P1.00mm_Vertical
+Through hole straight pin header, 1x34, 1.00mm pitch, single row
+Through hole pin header THT 1x34 1.00mm single row
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_1x34_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x34, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x34 1.00mm single row style1 pin1 left
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_1x34_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x34, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x34 1.00mm single row style2 pin1 right
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_1x35_P1.00mm_Horizontal
+Through hole angled pin header, 1x35, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x35 1.00mm single row
+0
+35
+35
+Connector_PinHeader_1.00mm
+PinHeader_1x35_P1.00mm_Vertical
+Through hole straight pin header, 1x35, 1.00mm pitch, single row
+Through hole pin header THT 1x35 1.00mm single row
+0
+35
+35
+Connector_PinHeader_1.00mm
+PinHeader_1x35_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x35, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x35 1.00mm single row style1 pin1 left
+0
+35
+35
+Connector_PinHeader_1.00mm
+PinHeader_1x35_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x35, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x35 1.00mm single row style2 pin1 right
+0
+35
+35
+Connector_PinHeader_1.00mm
+PinHeader_1x36_P1.00mm_Horizontal
+Through hole angled pin header, 1x36, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x36 1.00mm single row
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_1x36_P1.00mm_Vertical
+Through hole straight pin header, 1x36, 1.00mm pitch, single row
+Through hole pin header THT 1x36 1.00mm single row
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_1x36_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x36, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x36 1.00mm single row style1 pin1 left
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_1x36_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x36, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x36 1.00mm single row style2 pin1 right
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_1x37_P1.00mm_Horizontal
+Through hole angled pin header, 1x37, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x37 1.00mm single row
+0
+37
+37
+Connector_PinHeader_1.00mm
+PinHeader_1x37_P1.00mm_Vertical
+Through hole straight pin header, 1x37, 1.00mm pitch, single row
+Through hole pin header THT 1x37 1.00mm single row
+0
+37
+37
+Connector_PinHeader_1.00mm
+PinHeader_1x37_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x37, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x37 1.00mm single row style1 pin1 left
+0
+37
+37
+Connector_PinHeader_1.00mm
+PinHeader_1x37_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x37, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x37 1.00mm single row style2 pin1 right
+0
+37
+37
+Connector_PinHeader_1.00mm
+PinHeader_1x38_P1.00mm_Horizontal
+Through hole angled pin header, 1x38, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x38 1.00mm single row
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_1x38_P1.00mm_Vertical
+Through hole straight pin header, 1x38, 1.00mm pitch, single row
+Through hole pin header THT 1x38 1.00mm single row
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_1x38_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x38, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x38 1.00mm single row style1 pin1 left
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_1x38_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x38, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x38 1.00mm single row style2 pin1 right
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_1x39_P1.00mm_Horizontal
+Through hole angled pin header, 1x39, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x39 1.00mm single row
+0
+39
+39
+Connector_PinHeader_1.00mm
+PinHeader_1x39_P1.00mm_Vertical
+Through hole straight pin header, 1x39, 1.00mm pitch, single row
+Through hole pin header THT 1x39 1.00mm single row
+0
+39
+39
+Connector_PinHeader_1.00mm
+PinHeader_1x39_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x39, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x39 1.00mm single row style1 pin1 left
+0
+39
+39
+Connector_PinHeader_1.00mm
+PinHeader_1x39_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x39, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x39 1.00mm single row style2 pin1 right
+0
+39
+39
+Connector_PinHeader_1.00mm
+PinHeader_1x40_P1.00mm_Horizontal
+Through hole angled pin header, 1x40, 1.00mm pitch, 2.0mm pin length, single row
+Through hole angled pin header THT 1x40 1.00mm single row
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_1x40_P1.00mm_Vertical
+Through hole straight pin header, 1x40, 1.00mm pitch, single row
+Through hole pin header THT 1x40 1.00mm single row
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_1x40_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x40, 1.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x40 1.00mm single row style1 pin1 left
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_1x40_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x40, 1.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x40 1.00mm single row style2 pin1 right
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_2x01_P1.00mm_Horizontal
+Through hole angled pin header, 2x01, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x01 1.00mm double row
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_2x01_P1.00mm_Vertical
+Through hole straight pin header, 2x01, 1.00mm pitch, double rows
+Through hole pin header THT 2x01 1.00mm double row
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_2x01_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x01, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x01 1.00mm double row
+0
+2
+2
+Connector_PinHeader_1.00mm
+PinHeader_2x02_P1.00mm_Horizontal
+Through hole angled pin header, 2x02, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x02 1.00mm double row
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_2x02_P1.00mm_Vertical
+Through hole straight pin header, 2x02, 1.00mm pitch, double rows
+Through hole pin header THT 2x02 1.00mm double row
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_2x02_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x02, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x02 1.00mm double row
+0
+4
+4
+Connector_PinHeader_1.00mm
+PinHeader_2x03_P1.00mm_Horizontal
+Through hole angled pin header, 2x03, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x03 1.00mm double row
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_2x03_P1.00mm_Vertical
+Through hole straight pin header, 2x03, 1.00mm pitch, double rows
+Through hole pin header THT 2x03 1.00mm double row
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_2x03_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x03, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x03 1.00mm double row
+0
+6
+6
+Connector_PinHeader_1.00mm
+PinHeader_2x04_P1.00mm_Horizontal
+Through hole angled pin header, 2x04, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x04 1.00mm double row
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_2x04_P1.00mm_Vertical
+Through hole straight pin header, 2x04, 1.00mm pitch, double rows
+Through hole pin header THT 2x04 1.00mm double row
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_2x04_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x04, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x04 1.00mm double row
+0
+8
+8
+Connector_PinHeader_1.00mm
+PinHeader_2x05_P1.00mm_Horizontal
+Through hole angled pin header, 2x05, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x05 1.00mm double row
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_2x05_P1.00mm_Vertical
+Through hole straight pin header, 2x05, 1.00mm pitch, double rows
+Through hole pin header THT 2x05 1.00mm double row
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_2x05_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x05, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x05 1.00mm double row
+0
+10
+10
+Connector_PinHeader_1.00mm
+PinHeader_2x06_P1.00mm_Horizontal
+Through hole angled pin header, 2x06, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x06 1.00mm double row
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_2x06_P1.00mm_Vertical
+Through hole straight pin header, 2x06, 1.00mm pitch, double rows
+Through hole pin header THT 2x06 1.00mm double row
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_2x06_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x06, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x06 1.00mm double row
+0
+12
+12
+Connector_PinHeader_1.00mm
+PinHeader_2x07_P1.00mm_Horizontal
+Through hole angled pin header, 2x07, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x07 1.00mm double row
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_2x07_P1.00mm_Vertical
+Through hole straight pin header, 2x07, 1.00mm pitch, double rows
+Through hole pin header THT 2x07 1.00mm double row
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_2x07_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x07, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x07 1.00mm double row
+0
+14
+14
+Connector_PinHeader_1.00mm
+PinHeader_2x08_P1.00mm_Horizontal
+Through hole angled pin header, 2x08, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x08 1.00mm double row
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_2x08_P1.00mm_Vertical
+Through hole straight pin header, 2x08, 1.00mm pitch, double rows
+Through hole pin header THT 2x08 1.00mm double row
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_2x08_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x08, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x08 1.00mm double row
+0
+16
+16
+Connector_PinHeader_1.00mm
+PinHeader_2x09_P1.00mm_Horizontal
+Through hole angled pin header, 2x09, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x09 1.00mm double row
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_2x09_P1.00mm_Vertical
+Through hole straight pin header, 2x09, 1.00mm pitch, double rows
+Through hole pin header THT 2x09 1.00mm double row
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_2x09_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x09, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x09 1.00mm double row
+0
+18
+18
+Connector_PinHeader_1.00mm
+PinHeader_2x10_P1.00mm_Horizontal
+Through hole angled pin header, 2x10, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x10 1.00mm double row
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_2x10_P1.00mm_Vertical
+Through hole straight pin header, 2x10, 1.00mm pitch, double rows
+Through hole pin header THT 2x10 1.00mm double row
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_2x10_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x10, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x10 1.00mm double row
+0
+20
+20
+Connector_PinHeader_1.00mm
+PinHeader_2x11_P1.00mm_Horizontal
+Through hole angled pin header, 2x11, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x11 1.00mm double row
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_2x11_P1.00mm_Vertical
+Through hole straight pin header, 2x11, 1.00mm pitch, double rows
+Through hole pin header THT 2x11 1.00mm double row
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_2x11_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x11, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x11 1.00mm double row
+0
+22
+22
+Connector_PinHeader_1.00mm
+PinHeader_2x12_P1.00mm_Horizontal
+Through hole angled pin header, 2x12, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x12 1.00mm double row
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_2x12_P1.00mm_Vertical
+Through hole straight pin header, 2x12, 1.00mm pitch, double rows
+Through hole pin header THT 2x12 1.00mm double row
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_2x12_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x12, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x12 1.00mm double row
+0
+24
+24
+Connector_PinHeader_1.00mm
+PinHeader_2x13_P1.00mm_Horizontal
+Through hole angled pin header, 2x13, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x13 1.00mm double row
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_2x13_P1.00mm_Vertical
+Through hole straight pin header, 2x13, 1.00mm pitch, double rows
+Through hole pin header THT 2x13 1.00mm double row
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_2x13_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x13, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x13 1.00mm double row
+0
+26
+26
+Connector_PinHeader_1.00mm
+PinHeader_2x14_P1.00mm_Horizontal
+Through hole angled pin header, 2x14, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x14 1.00mm double row
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_2x14_P1.00mm_Vertical
+Through hole straight pin header, 2x14, 1.00mm pitch, double rows
+Through hole pin header THT 2x14 1.00mm double row
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_2x14_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x14, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x14 1.00mm double row
+0
+28
+28
+Connector_PinHeader_1.00mm
+PinHeader_2x15_P1.00mm_Horizontal
+Through hole angled pin header, 2x15, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x15 1.00mm double row
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_2x15_P1.00mm_Vertical
+Through hole straight pin header, 2x15, 1.00mm pitch, double rows
+Through hole pin header THT 2x15 1.00mm double row
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_2x15_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x15, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x15 1.00mm double row
+0
+30
+30
+Connector_PinHeader_1.00mm
+PinHeader_2x16_P1.00mm_Horizontal
+Through hole angled pin header, 2x16, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x16 1.00mm double row
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_2x16_P1.00mm_Vertical
+Through hole straight pin header, 2x16, 1.00mm pitch, double rows
+Through hole pin header THT 2x16 1.00mm double row
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_2x16_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x16, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x16 1.00mm double row
+0
+32
+32
+Connector_PinHeader_1.00mm
+PinHeader_2x17_P1.00mm_Horizontal
+Through hole angled pin header, 2x17, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x17 1.00mm double row
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_2x17_P1.00mm_Vertical
+Through hole straight pin header, 2x17, 1.00mm pitch, double rows
+Through hole pin header THT 2x17 1.00mm double row
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_2x17_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x17, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x17 1.00mm double row
+0
+34
+34
+Connector_PinHeader_1.00mm
+PinHeader_2x18_P1.00mm_Horizontal
+Through hole angled pin header, 2x18, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x18 1.00mm double row
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_2x18_P1.00mm_Vertical
+Through hole straight pin header, 2x18, 1.00mm pitch, double rows
+Through hole pin header THT 2x18 1.00mm double row
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_2x18_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x18, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x18 1.00mm double row
+0
+36
+36
+Connector_PinHeader_1.00mm
+PinHeader_2x19_P1.00mm_Horizontal
+Through hole angled pin header, 2x19, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x19 1.00mm double row
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_2x19_P1.00mm_Vertical
+Through hole straight pin header, 2x19, 1.00mm pitch, double rows
+Through hole pin header THT 2x19 1.00mm double row
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_2x19_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x19, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x19 1.00mm double row
+0
+38
+38
+Connector_PinHeader_1.00mm
+PinHeader_2x20_P1.00mm_Horizontal
+Through hole angled pin header, 2x20, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x20 1.00mm double row
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_2x20_P1.00mm_Vertical
+Through hole straight pin header, 2x20, 1.00mm pitch, double rows
+Through hole pin header THT 2x20 1.00mm double row
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_2x20_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x20, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x20 1.00mm double row
+0
+40
+40
+Connector_PinHeader_1.00mm
+PinHeader_2x21_P1.00mm_Horizontal
+Through hole angled pin header, 2x21, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x21 1.00mm double row
+0
+42
+42
+Connector_PinHeader_1.00mm
+PinHeader_2x21_P1.00mm_Vertical
+Through hole straight pin header, 2x21, 1.00mm pitch, double rows
+Through hole pin header THT 2x21 1.00mm double row
+0
+42
+42
+Connector_PinHeader_1.00mm
+PinHeader_2x21_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x21, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x21 1.00mm double row
+0
+42
+42
+Connector_PinHeader_1.00mm
+PinHeader_2x22_P1.00mm_Horizontal
+Through hole angled pin header, 2x22, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x22 1.00mm double row
+0
+44
+44
+Connector_PinHeader_1.00mm
+PinHeader_2x22_P1.00mm_Vertical
+Through hole straight pin header, 2x22, 1.00mm pitch, double rows
+Through hole pin header THT 2x22 1.00mm double row
+0
+44
+44
+Connector_PinHeader_1.00mm
+PinHeader_2x22_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x22, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x22 1.00mm double row
+0
+44
+44
+Connector_PinHeader_1.00mm
+PinHeader_2x23_P1.00mm_Horizontal
+Through hole angled pin header, 2x23, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x23 1.00mm double row
+0
+46
+46
+Connector_PinHeader_1.00mm
+PinHeader_2x23_P1.00mm_Vertical
+Through hole straight pin header, 2x23, 1.00mm pitch, double rows
+Through hole pin header THT 2x23 1.00mm double row
+0
+46
+46
+Connector_PinHeader_1.00mm
+PinHeader_2x23_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x23, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x23 1.00mm double row
+0
+46
+46
+Connector_PinHeader_1.00mm
+PinHeader_2x24_P1.00mm_Horizontal
+Through hole angled pin header, 2x24, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x24 1.00mm double row
+0
+48
+48
+Connector_PinHeader_1.00mm
+PinHeader_2x24_P1.00mm_Vertical
+Through hole straight pin header, 2x24, 1.00mm pitch, double rows
+Through hole pin header THT 2x24 1.00mm double row
+0
+48
+48
+Connector_PinHeader_1.00mm
+PinHeader_2x24_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x24, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x24 1.00mm double row
+0
+48
+48
+Connector_PinHeader_1.00mm
+PinHeader_2x25_P1.00mm_Horizontal
+Through hole angled pin header, 2x25, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x25 1.00mm double row
+0
+50
+50
+Connector_PinHeader_1.00mm
+PinHeader_2x25_P1.00mm_Vertical
+Through hole straight pin header, 2x25, 1.00mm pitch, double rows
+Through hole pin header THT 2x25 1.00mm double row
+0
+50
+50
+Connector_PinHeader_1.00mm
+PinHeader_2x25_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x25, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x25 1.00mm double row
+0
+50
+50
+Connector_PinHeader_1.00mm
+PinHeader_2x26_P1.00mm_Horizontal
+Through hole angled pin header, 2x26, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x26 1.00mm double row
+0
+52
+52
+Connector_PinHeader_1.00mm
+PinHeader_2x26_P1.00mm_Vertical
+Through hole straight pin header, 2x26, 1.00mm pitch, double rows
+Through hole pin header THT 2x26 1.00mm double row
+0
+52
+52
+Connector_PinHeader_1.00mm
+PinHeader_2x26_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x26, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x26 1.00mm double row
+0
+52
+52
+Connector_PinHeader_1.00mm
+PinHeader_2x27_P1.00mm_Horizontal
+Through hole angled pin header, 2x27, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x27 1.00mm double row
+0
+54
+54
+Connector_PinHeader_1.00mm
+PinHeader_2x27_P1.00mm_Vertical
+Through hole straight pin header, 2x27, 1.00mm pitch, double rows
+Through hole pin header THT 2x27 1.00mm double row
+0
+54
+54
+Connector_PinHeader_1.00mm
+PinHeader_2x27_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x27, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x27 1.00mm double row
+0
+54
+54
+Connector_PinHeader_1.00mm
+PinHeader_2x28_P1.00mm_Horizontal
+Through hole angled pin header, 2x28, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x28 1.00mm double row
+0
+56
+56
+Connector_PinHeader_1.00mm
+PinHeader_2x28_P1.00mm_Vertical
+Through hole straight pin header, 2x28, 1.00mm pitch, double rows
+Through hole pin header THT 2x28 1.00mm double row
+0
+56
+56
+Connector_PinHeader_1.00mm
+PinHeader_2x28_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x28, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x28 1.00mm double row
+0
+56
+56
+Connector_PinHeader_1.00mm
+PinHeader_2x29_P1.00mm_Horizontal
+Through hole angled pin header, 2x29, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x29 1.00mm double row
+0
+58
+58
+Connector_PinHeader_1.00mm
+PinHeader_2x29_P1.00mm_Vertical
+Through hole straight pin header, 2x29, 1.00mm pitch, double rows
+Through hole pin header THT 2x29 1.00mm double row
+0
+58
+58
+Connector_PinHeader_1.00mm
+PinHeader_2x29_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x29, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x29 1.00mm double row
+0
+58
+58
+Connector_PinHeader_1.00mm
+PinHeader_2x30_P1.00mm_Horizontal
+Through hole angled pin header, 2x30, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x30 1.00mm double row
+0
+60
+60
+Connector_PinHeader_1.00mm
+PinHeader_2x30_P1.00mm_Vertical
+Through hole straight pin header, 2x30, 1.00mm pitch, double rows
+Through hole pin header THT 2x30 1.00mm double row
+0
+60
+60
+Connector_PinHeader_1.00mm
+PinHeader_2x30_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x30, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x30 1.00mm double row
+0
+60
+60
+Connector_PinHeader_1.00mm
+PinHeader_2x31_P1.00mm_Horizontal
+Through hole angled pin header, 2x31, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x31 1.00mm double row
+0
+62
+62
+Connector_PinHeader_1.00mm
+PinHeader_2x31_P1.00mm_Vertical
+Through hole straight pin header, 2x31, 1.00mm pitch, double rows
+Through hole pin header THT 2x31 1.00mm double row
+0
+62
+62
+Connector_PinHeader_1.00mm
+PinHeader_2x31_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x31, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x31 1.00mm double row
+0
+62
+62
+Connector_PinHeader_1.00mm
+PinHeader_2x32_P1.00mm_Horizontal
+Through hole angled pin header, 2x32, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x32 1.00mm double row
+0
+64
+64
+Connector_PinHeader_1.00mm
+PinHeader_2x32_P1.00mm_Vertical
+Through hole straight pin header, 2x32, 1.00mm pitch, double rows
+Through hole pin header THT 2x32 1.00mm double row
+0
+64
+64
+Connector_PinHeader_1.00mm
+PinHeader_2x32_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x32, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x32 1.00mm double row
+0
+64
+64
+Connector_PinHeader_1.00mm
+PinHeader_2x33_P1.00mm_Horizontal
+Through hole angled pin header, 2x33, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x33 1.00mm double row
+0
+66
+66
+Connector_PinHeader_1.00mm
+PinHeader_2x33_P1.00mm_Vertical
+Through hole straight pin header, 2x33, 1.00mm pitch, double rows
+Through hole pin header THT 2x33 1.00mm double row
+0
+66
+66
+Connector_PinHeader_1.00mm
+PinHeader_2x33_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x33, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x33 1.00mm double row
+0
+66
+66
+Connector_PinHeader_1.00mm
+PinHeader_2x34_P1.00mm_Horizontal
+Through hole angled pin header, 2x34, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x34 1.00mm double row
+0
+68
+68
+Connector_PinHeader_1.00mm
+PinHeader_2x34_P1.00mm_Vertical
+Through hole straight pin header, 2x34, 1.00mm pitch, double rows
+Through hole pin header THT 2x34 1.00mm double row
+0
+68
+68
+Connector_PinHeader_1.00mm
+PinHeader_2x34_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x34, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x34 1.00mm double row
+0
+68
+68
+Connector_PinHeader_1.00mm
+PinHeader_2x35_P1.00mm_Horizontal
+Through hole angled pin header, 2x35, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x35 1.00mm double row
+0
+70
+70
+Connector_PinHeader_1.00mm
+PinHeader_2x35_P1.00mm_Vertical
+Through hole straight pin header, 2x35, 1.00mm pitch, double rows
+Through hole pin header THT 2x35 1.00mm double row
+0
+70
+70
+Connector_PinHeader_1.00mm
+PinHeader_2x35_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x35, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x35 1.00mm double row
+0
+70
+70
+Connector_PinHeader_1.00mm
+PinHeader_2x36_P1.00mm_Horizontal
+Through hole angled pin header, 2x36, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x36 1.00mm double row
+0
+72
+72
+Connector_PinHeader_1.00mm
+PinHeader_2x36_P1.00mm_Vertical
+Through hole straight pin header, 2x36, 1.00mm pitch, double rows
+Through hole pin header THT 2x36 1.00mm double row
+0
+72
+72
+Connector_PinHeader_1.00mm
+PinHeader_2x36_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x36, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x36 1.00mm double row
+0
+72
+72
+Connector_PinHeader_1.00mm
+PinHeader_2x37_P1.00mm_Horizontal
+Through hole angled pin header, 2x37, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x37 1.00mm double row
+0
+74
+74
+Connector_PinHeader_1.00mm
+PinHeader_2x37_P1.00mm_Vertical
+Through hole straight pin header, 2x37, 1.00mm pitch, double rows
+Through hole pin header THT 2x37 1.00mm double row
+0
+74
+74
+Connector_PinHeader_1.00mm
+PinHeader_2x37_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x37, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x37 1.00mm double row
+0
+74
+74
+Connector_PinHeader_1.00mm
+PinHeader_2x38_P1.00mm_Horizontal
+Through hole angled pin header, 2x38, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x38 1.00mm double row
+0
+76
+76
+Connector_PinHeader_1.00mm
+PinHeader_2x38_P1.00mm_Vertical
+Through hole straight pin header, 2x38, 1.00mm pitch, double rows
+Through hole pin header THT 2x38 1.00mm double row
+0
+76
+76
+Connector_PinHeader_1.00mm
+PinHeader_2x38_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x38, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x38 1.00mm double row
+0
+76
+76
+Connector_PinHeader_1.00mm
+PinHeader_2x39_P1.00mm_Horizontal
+Through hole angled pin header, 2x39, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x39 1.00mm double row
+0
+78
+78
+Connector_PinHeader_1.00mm
+PinHeader_2x39_P1.00mm_Vertical
+Through hole straight pin header, 2x39, 1.00mm pitch, double rows
+Through hole pin header THT 2x39 1.00mm double row
+0
+78
+78
+Connector_PinHeader_1.00mm
+PinHeader_2x39_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x39, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x39 1.00mm double row
+0
+78
+78
+Connector_PinHeader_1.00mm
+PinHeader_2x40_P1.00mm_Horizontal
+Through hole angled pin header, 2x40, 1.00mm pitch, 2.0mm pin length, double rows
+Through hole angled pin header THT 2x40 1.00mm double row
+0
+80
+80
+Connector_PinHeader_1.00mm
+PinHeader_2x40_P1.00mm_Vertical
+Through hole straight pin header, 2x40, 1.00mm pitch, double rows
+Through hole pin header THT 2x40 1.00mm double row
+0
+80
+80
+Connector_PinHeader_1.00mm
+PinHeader_2x40_P1.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x40, 1.00mm pitch, double rows
+Surface mounted pin header SMD 2x40 1.00mm double row
+0
+80
+80
+Connector_PinHeader_1.27mm
+PinHeader_1x01_P1.27mm_Horizontal
+Through hole angled pin header, 1x01, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x01 1.27mm single row
+0
+1
+1
+Connector_PinHeader_1.27mm
+PinHeader_1x01_P1.27mm_Vertical
+Through hole straight pin header, 1x01, 1.27mm pitch, single row
+Through hole pin header THT 1x01 1.27mm single row
+0
+1
+1
+Connector_PinHeader_1.27mm
+PinHeader_1x02_P1.27mm_Horizontal
+Through hole angled pin header, 1x02, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x02 1.27mm single row
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_1x02_P1.27mm_Vertical
+Through hole straight pin header, 1x02, 1.27mm pitch, single row
+Through hole pin header THT 1x02 1.27mm single row
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x02, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x02 1.27mm single row style1 pin1 left
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x02, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x02 1.27mm single row style2 pin1 right
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_1x03_P1.27mm_Horizontal
+Through hole angled pin header, 1x03, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x03 1.27mm single row
+0
+3
+3
+Connector_PinHeader_1.27mm
+PinHeader_1x03_P1.27mm_Vertical
+Through hole straight pin header, 1x03, 1.27mm pitch, single row
+Through hole pin header THT 1x03 1.27mm single row
+0
+3
+3
+Connector_PinHeader_1.27mm
+PinHeader_1x03_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x03, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x03 1.27mm single row style1 pin1 left
+0
+3
+3
+Connector_PinHeader_1.27mm
+PinHeader_1x03_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x03, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x03 1.27mm single row style2 pin1 right
+0
+3
+3
+Connector_PinHeader_1.27mm
+PinHeader_1x04_P1.27mm_Horizontal
+Through hole angled pin header, 1x04, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x04 1.27mm single row
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_1x04_P1.27mm_Vertical
+Through hole straight pin header, 1x04, 1.27mm pitch, single row
+Through hole pin header THT 1x04 1.27mm single row
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_1x04_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x04, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x04 1.27mm single row style1 pin1 left
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_1x04_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x04, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x04 1.27mm single row style2 pin1 right
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_1x05_P1.27mm_Horizontal
+Through hole angled pin header, 1x05, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x05 1.27mm single row
+0
+5
+5
+Connector_PinHeader_1.27mm
+PinHeader_1x05_P1.27mm_Vertical
+Through hole straight pin header, 1x05, 1.27mm pitch, single row
+Through hole pin header THT 1x05 1.27mm single row
+0
+5
+5
+Connector_PinHeader_1.27mm
+PinHeader_1x05_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x05, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x05 1.27mm single row style1 pin1 left
+0
+5
+5
+Connector_PinHeader_1.27mm
+PinHeader_1x05_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x05, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x05 1.27mm single row style2 pin1 right
+0
+5
+5
+Connector_PinHeader_1.27mm
+PinHeader_1x06_P1.27mm_Horizontal
+Through hole angled pin header, 1x06, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x06 1.27mm single row
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_1x06_P1.27mm_Vertical
+Through hole straight pin header, 1x06, 1.27mm pitch, single row
+Through hole pin header THT 1x06 1.27mm single row
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_1x06_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x06, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x06 1.27mm single row style1 pin1 left
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_1x06_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x06, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x06 1.27mm single row style2 pin1 right
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_1x07_P1.27mm_Horizontal
+Through hole angled pin header, 1x07, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x07 1.27mm single row
+0
+7
+7
+Connector_PinHeader_1.27mm
+PinHeader_1x07_P1.27mm_Vertical
+Through hole straight pin header, 1x07, 1.27mm pitch, single row
+Through hole pin header THT 1x07 1.27mm single row
+0
+7
+7
+Connector_PinHeader_1.27mm
+PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x07, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x07 1.27mm single row style1 pin1 left
+0
+7
+7
+Connector_PinHeader_1.27mm
+PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x07, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x07 1.27mm single row style2 pin1 right
+0
+7
+7
+Connector_PinHeader_1.27mm
+PinHeader_1x08_P1.27mm_Horizontal
+Through hole angled pin header, 1x08, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x08 1.27mm single row
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_1x08_P1.27mm_Vertical
+Through hole straight pin header, 1x08, 1.27mm pitch, single row
+Through hole pin header THT 1x08 1.27mm single row
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_1x08_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x08, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x08 1.27mm single row style1 pin1 left
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_1x08_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x08, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x08 1.27mm single row style2 pin1 right
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_1x09_P1.27mm_Horizontal
+Through hole angled pin header, 1x09, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x09 1.27mm single row
+0
+9
+9
+Connector_PinHeader_1.27mm
+PinHeader_1x09_P1.27mm_Vertical
+Through hole straight pin header, 1x09, 1.27mm pitch, single row
+Through hole pin header THT 1x09 1.27mm single row
+0
+9
+9
+Connector_PinHeader_1.27mm
+PinHeader_1x09_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x09, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x09 1.27mm single row style1 pin1 left
+0
+9
+9
+Connector_PinHeader_1.27mm
+PinHeader_1x09_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x09, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x09 1.27mm single row style2 pin1 right
+0
+9
+9
+Connector_PinHeader_1.27mm
+PinHeader_1x10_P1.27mm_Horizontal
+Through hole angled pin header, 1x10, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x10 1.27mm single row
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_1x10_P1.27mm_Vertical
+Through hole straight pin header, 1x10, 1.27mm pitch, single row
+Through hole pin header THT 1x10 1.27mm single row
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_1x10_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x10, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x10 1.27mm single row style1 pin1 left
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_1x10_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x10, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x10 1.27mm single row style2 pin1 right
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_1x11_P1.27mm_Horizontal
+Through hole angled pin header, 1x11, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x11 1.27mm single row
+0
+11
+11
+Connector_PinHeader_1.27mm
+PinHeader_1x11_P1.27mm_Vertical
+Through hole straight pin header, 1x11, 1.27mm pitch, single row
+Through hole pin header THT 1x11 1.27mm single row
+0
+11
+11
+Connector_PinHeader_1.27mm
+PinHeader_1x11_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x11, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x11 1.27mm single row style1 pin1 left
+0
+11
+11
+Connector_PinHeader_1.27mm
+PinHeader_1x11_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x11, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x11 1.27mm single row style2 pin1 right
+0
+11
+11
+Connector_PinHeader_1.27mm
+PinHeader_1x12_P1.27mm_Horizontal
+Through hole angled pin header, 1x12, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x12 1.27mm single row
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_1x12_P1.27mm_Vertical
+Through hole straight pin header, 1x12, 1.27mm pitch, single row
+Through hole pin header THT 1x12 1.27mm single row
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_1x12_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x12, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x12 1.27mm single row style1 pin1 left
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_1x12_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x12, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x12 1.27mm single row style2 pin1 right
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_1x13_P1.27mm_Horizontal
+Through hole angled pin header, 1x13, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x13 1.27mm single row
+0
+13
+13
+Connector_PinHeader_1.27mm
+PinHeader_1x13_P1.27mm_Vertical
+Through hole straight pin header, 1x13, 1.27mm pitch, single row
+Through hole pin header THT 1x13 1.27mm single row
+0
+13
+13
+Connector_PinHeader_1.27mm
+PinHeader_1x13_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x13, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x13 1.27mm single row style1 pin1 left
+0
+13
+13
+Connector_PinHeader_1.27mm
+PinHeader_1x13_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x13, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x13 1.27mm single row style2 pin1 right
+0
+13
+13
+Connector_PinHeader_1.27mm
+PinHeader_1x14_P1.27mm_Horizontal
+Through hole angled pin header, 1x14, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x14 1.27mm single row
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_1x14_P1.27mm_Vertical
+Through hole straight pin header, 1x14, 1.27mm pitch, single row
+Through hole pin header THT 1x14 1.27mm single row
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_1x14_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x14, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x14 1.27mm single row style1 pin1 left
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_1x14_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x14, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x14 1.27mm single row style2 pin1 right
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_1x15_P1.27mm_Horizontal
+Through hole angled pin header, 1x15, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x15 1.27mm single row
+0
+15
+15
+Connector_PinHeader_1.27mm
+PinHeader_1x15_P1.27mm_Vertical
+Through hole straight pin header, 1x15, 1.27mm pitch, single row
+Through hole pin header THT 1x15 1.27mm single row
+0
+15
+15
+Connector_PinHeader_1.27mm
+PinHeader_1x15_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x15, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x15 1.27mm single row style1 pin1 left
+0
+15
+15
+Connector_PinHeader_1.27mm
+PinHeader_1x15_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x15, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x15 1.27mm single row style2 pin1 right
+0
+15
+15
+Connector_PinHeader_1.27mm
+PinHeader_1x16_P1.27mm_Horizontal
+Through hole angled pin header, 1x16, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x16 1.27mm single row
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_1x16_P1.27mm_Vertical
+Through hole straight pin header, 1x16, 1.27mm pitch, single row
+Through hole pin header THT 1x16 1.27mm single row
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_1x16_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x16, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x16 1.27mm single row style1 pin1 left
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_1x16_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x16, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x16 1.27mm single row style2 pin1 right
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_1x17_P1.27mm_Horizontal
+Through hole angled pin header, 1x17, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x17 1.27mm single row
+0
+17
+17
+Connector_PinHeader_1.27mm
+PinHeader_1x17_P1.27mm_Vertical
+Through hole straight pin header, 1x17, 1.27mm pitch, single row
+Through hole pin header THT 1x17 1.27mm single row
+0
+17
+17
+Connector_PinHeader_1.27mm
+PinHeader_1x17_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x17, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x17 1.27mm single row style1 pin1 left
+0
+17
+17
+Connector_PinHeader_1.27mm
+PinHeader_1x17_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x17, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x17 1.27mm single row style2 pin1 right
+0
+17
+17
+Connector_PinHeader_1.27mm
+PinHeader_1x18_P1.27mm_Horizontal
+Through hole angled pin header, 1x18, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x18 1.27mm single row
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_1x18_P1.27mm_Vertical
+Through hole straight pin header, 1x18, 1.27mm pitch, single row
+Through hole pin header THT 1x18 1.27mm single row
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_1x18_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x18, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x18 1.27mm single row style1 pin1 left
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_1x18_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x18, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x18 1.27mm single row style2 pin1 right
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_1x19_P1.27mm_Horizontal
+Through hole angled pin header, 1x19, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x19 1.27mm single row
+0
+19
+19
+Connector_PinHeader_1.27mm
+PinHeader_1x19_P1.27mm_Vertical
+Through hole straight pin header, 1x19, 1.27mm pitch, single row
+Through hole pin header THT 1x19 1.27mm single row
+0
+19
+19
+Connector_PinHeader_1.27mm
+PinHeader_1x19_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x19, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x19 1.27mm single row style1 pin1 left
+0
+19
+19
+Connector_PinHeader_1.27mm
+PinHeader_1x19_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x19, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x19 1.27mm single row style2 pin1 right
+0
+19
+19
+Connector_PinHeader_1.27mm
+PinHeader_1x20_P1.27mm_Horizontal
+Through hole angled pin header, 1x20, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x20 1.27mm single row
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_1x20_P1.27mm_Vertical
+Through hole straight pin header, 1x20, 1.27mm pitch, single row
+Through hole pin header THT 1x20 1.27mm single row
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_1x20_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x20, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x20 1.27mm single row style1 pin1 left
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_1x20_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x20, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x20 1.27mm single row style2 pin1 right
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_1x21_P1.27mm_Horizontal
+Through hole angled pin header, 1x21, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x21 1.27mm single row
+0
+21
+21
+Connector_PinHeader_1.27mm
+PinHeader_1x21_P1.27mm_Vertical
+Through hole straight pin header, 1x21, 1.27mm pitch, single row
+Through hole pin header THT 1x21 1.27mm single row
+0
+21
+21
+Connector_PinHeader_1.27mm
+PinHeader_1x21_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x21, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x21 1.27mm single row style1 pin1 left
+0
+21
+21
+Connector_PinHeader_1.27mm
+PinHeader_1x21_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x21, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x21 1.27mm single row style2 pin1 right
+0
+21
+21
+Connector_PinHeader_1.27mm
+PinHeader_1x22_P1.27mm_Horizontal
+Through hole angled pin header, 1x22, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x22 1.27mm single row
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_1x22_P1.27mm_Vertical
+Through hole straight pin header, 1x22, 1.27mm pitch, single row
+Through hole pin header THT 1x22 1.27mm single row
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_1x22_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x22, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x22 1.27mm single row style1 pin1 left
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_1x22_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x22, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x22 1.27mm single row style2 pin1 right
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_1x23_P1.27mm_Horizontal
+Through hole angled pin header, 1x23, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x23 1.27mm single row
+0
+23
+23
+Connector_PinHeader_1.27mm
+PinHeader_1x23_P1.27mm_Vertical
+Through hole straight pin header, 1x23, 1.27mm pitch, single row
+Through hole pin header THT 1x23 1.27mm single row
+0
+23
+23
+Connector_PinHeader_1.27mm
+PinHeader_1x23_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x23, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x23 1.27mm single row style1 pin1 left
+0
+23
+23
+Connector_PinHeader_1.27mm
+PinHeader_1x23_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x23, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x23 1.27mm single row style2 pin1 right
+0
+23
+23
+Connector_PinHeader_1.27mm
+PinHeader_1x24_P1.27mm_Horizontal
+Through hole angled pin header, 1x24, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x24 1.27mm single row
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_1x24_P1.27mm_Vertical
+Through hole straight pin header, 1x24, 1.27mm pitch, single row
+Through hole pin header THT 1x24 1.27mm single row
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_1x24_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x24, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x24 1.27mm single row style1 pin1 left
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_1x24_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x24, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x24 1.27mm single row style2 pin1 right
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_1x25_P1.27mm_Horizontal
+Through hole angled pin header, 1x25, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x25 1.27mm single row
+0
+25
+25
+Connector_PinHeader_1.27mm
+PinHeader_1x25_P1.27mm_Vertical
+Through hole straight pin header, 1x25, 1.27mm pitch, single row
+Through hole pin header THT 1x25 1.27mm single row
+0
+25
+25
+Connector_PinHeader_1.27mm
+PinHeader_1x25_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x25, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x25 1.27mm single row style1 pin1 left
+0
+25
+25
+Connector_PinHeader_1.27mm
+PinHeader_1x25_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x25, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x25 1.27mm single row style2 pin1 right
+0
+25
+25
+Connector_PinHeader_1.27mm
+PinHeader_1x26_P1.27mm_Horizontal
+Through hole angled pin header, 1x26, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x26 1.27mm single row
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_1x26_P1.27mm_Vertical
+Through hole straight pin header, 1x26, 1.27mm pitch, single row
+Through hole pin header THT 1x26 1.27mm single row
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_1x26_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x26, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x26 1.27mm single row style1 pin1 left
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_1x26_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x26, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x26 1.27mm single row style2 pin1 right
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_1x27_P1.27mm_Horizontal
+Through hole angled pin header, 1x27, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x27 1.27mm single row
+0
+27
+27
+Connector_PinHeader_1.27mm
+PinHeader_1x27_P1.27mm_Vertical
+Through hole straight pin header, 1x27, 1.27mm pitch, single row
+Through hole pin header THT 1x27 1.27mm single row
+0
+27
+27
+Connector_PinHeader_1.27mm
+PinHeader_1x27_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x27, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x27 1.27mm single row style1 pin1 left
+0
+27
+27
+Connector_PinHeader_1.27mm
+PinHeader_1x27_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x27, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x27 1.27mm single row style2 pin1 right
+0
+27
+27
+Connector_PinHeader_1.27mm
+PinHeader_1x28_P1.27mm_Horizontal
+Through hole angled pin header, 1x28, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x28 1.27mm single row
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_1x28_P1.27mm_Vertical
+Through hole straight pin header, 1x28, 1.27mm pitch, single row
+Through hole pin header THT 1x28 1.27mm single row
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_1x28_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x28, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x28 1.27mm single row style1 pin1 left
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_1x28_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x28, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x28 1.27mm single row style2 pin1 right
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_1x29_P1.27mm_Horizontal
+Through hole angled pin header, 1x29, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x29 1.27mm single row
+0
+29
+29
+Connector_PinHeader_1.27mm
+PinHeader_1x29_P1.27mm_Vertical
+Through hole straight pin header, 1x29, 1.27mm pitch, single row
+Through hole pin header THT 1x29 1.27mm single row
+0
+29
+29
+Connector_PinHeader_1.27mm
+PinHeader_1x29_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x29, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x29 1.27mm single row style1 pin1 left
+0
+29
+29
+Connector_PinHeader_1.27mm
+PinHeader_1x29_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x29, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x29 1.27mm single row style2 pin1 right
+0
+29
+29
+Connector_PinHeader_1.27mm
+PinHeader_1x30_P1.27mm_Horizontal
+Through hole angled pin header, 1x30, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x30 1.27mm single row
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_1x30_P1.27mm_Vertical
+Through hole straight pin header, 1x30, 1.27mm pitch, single row
+Through hole pin header THT 1x30 1.27mm single row
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_1x30_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x30, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x30 1.27mm single row style1 pin1 left
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_1x30_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x30, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x30 1.27mm single row style2 pin1 right
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_1x31_P1.27mm_Horizontal
+Through hole angled pin header, 1x31, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x31 1.27mm single row
+0
+31
+31
+Connector_PinHeader_1.27mm
+PinHeader_1x31_P1.27mm_Vertical
+Through hole straight pin header, 1x31, 1.27mm pitch, single row
+Through hole pin header THT 1x31 1.27mm single row
+0
+31
+31
+Connector_PinHeader_1.27mm
+PinHeader_1x31_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x31, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x31 1.27mm single row style1 pin1 left
+0
+31
+31
+Connector_PinHeader_1.27mm
+PinHeader_1x31_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x31, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x31 1.27mm single row style2 pin1 right
+0
+31
+31
+Connector_PinHeader_1.27mm
+PinHeader_1x32_P1.27mm_Horizontal
+Through hole angled pin header, 1x32, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x32 1.27mm single row
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_1x32_P1.27mm_Vertical
+Through hole straight pin header, 1x32, 1.27mm pitch, single row
+Through hole pin header THT 1x32 1.27mm single row
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_1x32_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x32, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x32 1.27mm single row style1 pin1 left
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_1x32_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x32, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x32 1.27mm single row style2 pin1 right
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_1x33_P1.27mm_Horizontal
+Through hole angled pin header, 1x33, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x33 1.27mm single row
+0
+33
+33
+Connector_PinHeader_1.27mm
+PinHeader_1x33_P1.27mm_Vertical
+Through hole straight pin header, 1x33, 1.27mm pitch, single row
+Through hole pin header THT 1x33 1.27mm single row
+0
+33
+33
+Connector_PinHeader_1.27mm
+PinHeader_1x33_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x33, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x33 1.27mm single row style1 pin1 left
+0
+33
+33
+Connector_PinHeader_1.27mm
+PinHeader_1x33_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x33, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x33 1.27mm single row style2 pin1 right
+0
+33
+33
+Connector_PinHeader_1.27mm
+PinHeader_1x34_P1.27mm_Horizontal
+Through hole angled pin header, 1x34, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x34 1.27mm single row
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_1x34_P1.27mm_Vertical
+Through hole straight pin header, 1x34, 1.27mm pitch, single row
+Through hole pin header THT 1x34 1.27mm single row
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_1x34_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x34, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x34 1.27mm single row style1 pin1 left
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_1x34_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x34, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x34 1.27mm single row style2 pin1 right
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_1x35_P1.27mm_Horizontal
+Through hole angled pin header, 1x35, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x35 1.27mm single row
+0
+35
+35
+Connector_PinHeader_1.27mm
+PinHeader_1x35_P1.27mm_Vertical
+Through hole straight pin header, 1x35, 1.27mm pitch, single row
+Through hole pin header THT 1x35 1.27mm single row
+0
+35
+35
+Connector_PinHeader_1.27mm
+PinHeader_1x35_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x35, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x35 1.27mm single row style1 pin1 left
+0
+35
+35
+Connector_PinHeader_1.27mm
+PinHeader_1x35_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x35, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x35 1.27mm single row style2 pin1 right
+0
+35
+35
+Connector_PinHeader_1.27mm
+PinHeader_1x36_P1.27mm_Horizontal
+Through hole angled pin header, 1x36, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x36 1.27mm single row
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_1x36_P1.27mm_Vertical
+Through hole straight pin header, 1x36, 1.27mm pitch, single row
+Through hole pin header THT 1x36 1.27mm single row
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_1x36_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x36, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x36 1.27mm single row style1 pin1 left
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_1x36_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x36, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x36 1.27mm single row style2 pin1 right
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_1x37_P1.27mm_Horizontal
+Through hole angled pin header, 1x37, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x37 1.27mm single row
+0
+37
+37
+Connector_PinHeader_1.27mm
+PinHeader_1x37_P1.27mm_Vertical
+Through hole straight pin header, 1x37, 1.27mm pitch, single row
+Through hole pin header THT 1x37 1.27mm single row
+0
+37
+37
+Connector_PinHeader_1.27mm
+PinHeader_1x37_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x37, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x37 1.27mm single row style1 pin1 left
+0
+37
+37
+Connector_PinHeader_1.27mm
+PinHeader_1x37_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x37, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x37 1.27mm single row style2 pin1 right
+0
+37
+37
+Connector_PinHeader_1.27mm
+PinHeader_1x38_P1.27mm_Horizontal
+Through hole angled pin header, 1x38, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x38 1.27mm single row
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_1x38_P1.27mm_Vertical
+Through hole straight pin header, 1x38, 1.27mm pitch, single row
+Through hole pin header THT 1x38 1.27mm single row
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_1x38_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x38, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x38 1.27mm single row style1 pin1 left
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_1x38_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x38, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x38 1.27mm single row style2 pin1 right
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_1x39_P1.27mm_Horizontal
+Through hole angled pin header, 1x39, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x39 1.27mm single row
+0
+39
+39
+Connector_PinHeader_1.27mm
+PinHeader_1x39_P1.27mm_Vertical
+Through hole straight pin header, 1x39, 1.27mm pitch, single row
+Through hole pin header THT 1x39 1.27mm single row
+0
+39
+39
+Connector_PinHeader_1.27mm
+PinHeader_1x39_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x39, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x39 1.27mm single row style1 pin1 left
+0
+39
+39
+Connector_PinHeader_1.27mm
+PinHeader_1x39_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x39, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x39 1.27mm single row style2 pin1 right
+0
+39
+39
+Connector_PinHeader_1.27mm
+PinHeader_1x40_P1.27mm_Horizontal
+Through hole angled pin header, 1x40, 1.27mm pitch, 4.0mm pin length, single row
+Through hole angled pin header THT 1x40 1.27mm single row
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_1x40_P1.27mm_Vertical
+Through hole straight pin header, 1x40, 1.27mm pitch, single row
+Through hole pin header THT 1x40 1.27mm single row
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_1x40_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x40, 1.27mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x40 1.27mm single row style1 pin1 left
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_1x40_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x40, 1.27mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x40 1.27mm single row style2 pin1 right
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_2x01_P1.27mm_Horizontal
+Through hole angled pin header, 2x01, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x01 1.27mm double row
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_2x01_P1.27mm_Vertical
+Through hole straight pin header, 2x01, 1.27mm pitch, double rows
+Through hole pin header THT 2x01 1.27mm double row
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_2x01_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x01, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x01 1.27mm double row
+0
+2
+2
+Connector_PinHeader_1.27mm
+PinHeader_2x02_P1.27mm_Horizontal
+Through hole angled pin header, 2x02, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x02 1.27mm double row
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_2x02_P1.27mm_Vertical
+Through hole straight pin header, 2x02, 1.27mm pitch, double rows
+Through hole pin header THT 2x02 1.27mm double row
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_2x02_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x02, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x02 1.27mm double row
+0
+4
+4
+Connector_PinHeader_1.27mm
+PinHeader_2x03_P1.27mm_Horizontal
+Through hole angled pin header, 2x03, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x03 1.27mm double row
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_2x03_P1.27mm_Vertical
+Through hole straight pin header, 2x03, 1.27mm pitch, double rows
+Through hole pin header THT 2x03 1.27mm double row
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_2x03_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x03, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x03 1.27mm double row
+0
+6
+6
+Connector_PinHeader_1.27mm
+PinHeader_2x04_P1.27mm_Horizontal
+Through hole angled pin header, 2x04, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x04 1.27mm double row
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_2x04_P1.27mm_Vertical
+Through hole straight pin header, 2x04, 1.27mm pitch, double rows
+Through hole pin header THT 2x04 1.27mm double row
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_2x04_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x04, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x04 1.27mm double row
+0
+8
+8
+Connector_PinHeader_1.27mm
+PinHeader_2x05_P1.27mm_Horizontal
+Through hole angled pin header, 2x05, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x05 1.27mm double row
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_2x05_P1.27mm_Vertical
+Through hole straight pin header, 2x05, 1.27mm pitch, double rows
+Through hole pin header THT 2x05 1.27mm double row
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_2x05_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x05, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x05 1.27mm double row
+0
+10
+10
+Connector_PinHeader_1.27mm
+PinHeader_2x06_P1.27mm_Horizontal
+Through hole angled pin header, 2x06, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x06 1.27mm double row
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_2x06_P1.27mm_Vertical
+Through hole straight pin header, 2x06, 1.27mm pitch, double rows
+Through hole pin header THT 2x06 1.27mm double row
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_2x06_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x06, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x06 1.27mm double row
+0
+12
+12
+Connector_PinHeader_1.27mm
+PinHeader_2x07_P1.27mm_Horizontal
+Through hole angled pin header, 2x07, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x07 1.27mm double row
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_2x07_P1.27mm_Vertical
+Through hole straight pin header, 2x07, 1.27mm pitch, double rows
+Through hole pin header THT 2x07 1.27mm double row
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_2x07_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x07, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x07 1.27mm double row
+0
+14
+14
+Connector_PinHeader_1.27mm
+PinHeader_2x08_P1.27mm_Horizontal
+Through hole angled pin header, 2x08, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x08 1.27mm double row
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_2x08_P1.27mm_Vertical
+Through hole straight pin header, 2x08, 1.27mm pitch, double rows
+Through hole pin header THT 2x08 1.27mm double row
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_2x08_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x08, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x08 1.27mm double row
+0
+16
+16
+Connector_PinHeader_1.27mm
+PinHeader_2x09_P1.27mm_Horizontal
+Through hole angled pin header, 2x09, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x09 1.27mm double row
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_2x09_P1.27mm_Vertical
+Through hole straight pin header, 2x09, 1.27mm pitch, double rows
+Through hole pin header THT 2x09 1.27mm double row
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_2x09_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x09, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x09 1.27mm double row
+0
+18
+18
+Connector_PinHeader_1.27mm
+PinHeader_2x10_P1.27mm_Horizontal
+Through hole angled pin header, 2x10, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x10 1.27mm double row
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_2x10_P1.27mm_Vertical
+Through hole straight pin header, 2x10, 1.27mm pitch, double rows
+Through hole pin header THT 2x10 1.27mm double row
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_2x10_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x10, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x10 1.27mm double row
+0
+20
+20
+Connector_PinHeader_1.27mm
+PinHeader_2x11_P1.27mm_Horizontal
+Through hole angled pin header, 2x11, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x11 1.27mm double row
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_2x11_P1.27mm_Vertical
+Through hole straight pin header, 2x11, 1.27mm pitch, double rows
+Through hole pin header THT 2x11 1.27mm double row
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_2x11_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x11, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x11 1.27mm double row
+0
+22
+22
+Connector_PinHeader_1.27mm
+PinHeader_2x12_P1.27mm_Horizontal
+Through hole angled pin header, 2x12, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x12 1.27mm double row
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_2x12_P1.27mm_Vertical
+Through hole straight pin header, 2x12, 1.27mm pitch, double rows
+Through hole pin header THT 2x12 1.27mm double row
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_2x12_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x12, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x12 1.27mm double row
+0
+24
+24
+Connector_PinHeader_1.27mm
+PinHeader_2x13_P1.27mm_Horizontal
+Through hole angled pin header, 2x13, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x13 1.27mm double row
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_2x13_P1.27mm_Vertical
+Through hole straight pin header, 2x13, 1.27mm pitch, double rows
+Through hole pin header THT 2x13 1.27mm double row
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_2x13_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x13, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x13 1.27mm double row
+0
+26
+26
+Connector_PinHeader_1.27mm
+PinHeader_2x14_P1.27mm_Horizontal
+Through hole angled pin header, 2x14, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x14 1.27mm double row
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_2x14_P1.27mm_Vertical
+Through hole straight pin header, 2x14, 1.27mm pitch, double rows
+Through hole pin header THT 2x14 1.27mm double row
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_2x14_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x14, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x14 1.27mm double row
+0
+28
+28
+Connector_PinHeader_1.27mm
+PinHeader_2x15_P1.27mm_Horizontal
+Through hole angled pin header, 2x15, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x15 1.27mm double row
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_2x15_P1.27mm_Vertical
+Through hole straight pin header, 2x15, 1.27mm pitch, double rows
+Through hole pin header THT 2x15 1.27mm double row
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_2x15_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x15, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x15 1.27mm double row
+0
+30
+30
+Connector_PinHeader_1.27mm
+PinHeader_2x16_P1.27mm_Horizontal
+Through hole angled pin header, 2x16, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x16 1.27mm double row
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_2x16_P1.27mm_Vertical
+Through hole straight pin header, 2x16, 1.27mm pitch, double rows
+Through hole pin header THT 2x16 1.27mm double row
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_2x16_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x16, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x16 1.27mm double row
+0
+32
+32
+Connector_PinHeader_1.27mm
+PinHeader_2x17_P1.27mm_Horizontal
+Through hole angled pin header, 2x17, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x17 1.27mm double row
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_2x17_P1.27mm_Vertical
+Through hole straight pin header, 2x17, 1.27mm pitch, double rows
+Through hole pin header THT 2x17 1.27mm double row
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_2x17_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x17, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x17 1.27mm double row
+0
+34
+34
+Connector_PinHeader_1.27mm
+PinHeader_2x18_P1.27mm_Horizontal
+Through hole angled pin header, 2x18, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x18 1.27mm double row
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_2x18_P1.27mm_Vertical
+Through hole straight pin header, 2x18, 1.27mm pitch, double rows
+Through hole pin header THT 2x18 1.27mm double row
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_2x18_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x18, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x18 1.27mm double row
+0
+36
+36
+Connector_PinHeader_1.27mm
+PinHeader_2x19_P1.27mm_Horizontal
+Through hole angled pin header, 2x19, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x19 1.27mm double row
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_2x19_P1.27mm_Vertical
+Through hole straight pin header, 2x19, 1.27mm pitch, double rows
+Through hole pin header THT 2x19 1.27mm double row
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_2x19_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x19, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x19 1.27mm double row
+0
+38
+38
+Connector_PinHeader_1.27mm
+PinHeader_2x20_P1.27mm_Horizontal
+Through hole angled pin header, 2x20, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x20 1.27mm double row
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_2x20_P1.27mm_Vertical
+Through hole straight pin header, 2x20, 1.27mm pitch, double rows
+Through hole pin header THT 2x20 1.27mm double row
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_2x20_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x20, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x20 1.27mm double row
+0
+40
+40
+Connector_PinHeader_1.27mm
+PinHeader_2x21_P1.27mm_Horizontal
+Through hole angled pin header, 2x21, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x21 1.27mm double row
+0
+42
+42
+Connector_PinHeader_1.27mm
+PinHeader_2x21_P1.27mm_Vertical
+Through hole straight pin header, 2x21, 1.27mm pitch, double rows
+Through hole pin header THT 2x21 1.27mm double row
+0
+42
+42
+Connector_PinHeader_1.27mm
+PinHeader_2x21_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x21, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x21 1.27mm double row
+0
+42
+42
+Connector_PinHeader_1.27mm
+PinHeader_2x22_P1.27mm_Horizontal
+Through hole angled pin header, 2x22, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x22 1.27mm double row
+0
+44
+44
+Connector_PinHeader_1.27mm
+PinHeader_2x22_P1.27mm_Vertical
+Through hole straight pin header, 2x22, 1.27mm pitch, double rows
+Through hole pin header THT 2x22 1.27mm double row
+0
+44
+44
+Connector_PinHeader_1.27mm
+PinHeader_2x22_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x22, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x22 1.27mm double row
+0
+44
+44
+Connector_PinHeader_1.27mm
+PinHeader_2x23_P1.27mm_Horizontal
+Through hole angled pin header, 2x23, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x23 1.27mm double row
+0
+46
+46
+Connector_PinHeader_1.27mm
+PinHeader_2x23_P1.27mm_Vertical
+Through hole straight pin header, 2x23, 1.27mm pitch, double rows
+Through hole pin header THT 2x23 1.27mm double row
+0
+46
+46
+Connector_PinHeader_1.27mm
+PinHeader_2x23_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x23, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x23 1.27mm double row
+0
+46
+46
+Connector_PinHeader_1.27mm
+PinHeader_2x24_P1.27mm_Horizontal
+Through hole angled pin header, 2x24, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x24 1.27mm double row
+0
+48
+48
+Connector_PinHeader_1.27mm
+PinHeader_2x24_P1.27mm_Vertical
+Through hole straight pin header, 2x24, 1.27mm pitch, double rows
+Through hole pin header THT 2x24 1.27mm double row
+0
+48
+48
+Connector_PinHeader_1.27mm
+PinHeader_2x24_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x24, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x24 1.27mm double row
+0
+48
+48
+Connector_PinHeader_1.27mm
+PinHeader_2x25_P1.27mm_Horizontal
+Through hole angled pin header, 2x25, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x25 1.27mm double row
+0
+50
+50
+Connector_PinHeader_1.27mm
+PinHeader_2x25_P1.27mm_Vertical
+Through hole straight pin header, 2x25, 1.27mm pitch, double rows
+Through hole pin header THT 2x25 1.27mm double row
+0
+50
+50
+Connector_PinHeader_1.27mm
+PinHeader_2x25_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x25, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x25 1.27mm double row
+0
+50
+50
+Connector_PinHeader_1.27mm
+PinHeader_2x26_P1.27mm_Horizontal
+Through hole angled pin header, 2x26, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x26 1.27mm double row
+0
+52
+52
+Connector_PinHeader_1.27mm
+PinHeader_2x26_P1.27mm_Vertical
+Through hole straight pin header, 2x26, 1.27mm pitch, double rows
+Through hole pin header THT 2x26 1.27mm double row
+0
+52
+52
+Connector_PinHeader_1.27mm
+PinHeader_2x26_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x26, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x26 1.27mm double row
+0
+52
+52
+Connector_PinHeader_1.27mm
+PinHeader_2x27_P1.27mm_Horizontal
+Through hole angled pin header, 2x27, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x27 1.27mm double row
+0
+54
+54
+Connector_PinHeader_1.27mm
+PinHeader_2x27_P1.27mm_Vertical
+Through hole straight pin header, 2x27, 1.27mm pitch, double rows
+Through hole pin header THT 2x27 1.27mm double row
+0
+54
+54
+Connector_PinHeader_1.27mm
+PinHeader_2x27_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x27, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x27 1.27mm double row
+0
+54
+54
+Connector_PinHeader_1.27mm
+PinHeader_2x28_P1.27mm_Horizontal
+Through hole angled pin header, 2x28, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x28 1.27mm double row
+0
+56
+56
+Connector_PinHeader_1.27mm
+PinHeader_2x28_P1.27mm_Vertical
+Through hole straight pin header, 2x28, 1.27mm pitch, double rows
+Through hole pin header THT 2x28 1.27mm double row
+0
+56
+56
+Connector_PinHeader_1.27mm
+PinHeader_2x28_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x28, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x28 1.27mm double row
+0
+56
+56
+Connector_PinHeader_1.27mm
+PinHeader_2x29_P1.27mm_Horizontal
+Through hole angled pin header, 2x29, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x29 1.27mm double row
+0
+58
+58
+Connector_PinHeader_1.27mm
+PinHeader_2x29_P1.27mm_Vertical
+Through hole straight pin header, 2x29, 1.27mm pitch, double rows
+Through hole pin header THT 2x29 1.27mm double row
+0
+58
+58
+Connector_PinHeader_1.27mm
+PinHeader_2x29_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x29, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x29 1.27mm double row
+0
+58
+58
+Connector_PinHeader_1.27mm
+PinHeader_2x30_P1.27mm_Horizontal
+Through hole angled pin header, 2x30, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x30 1.27mm double row
+0
+60
+60
+Connector_PinHeader_1.27mm
+PinHeader_2x30_P1.27mm_Vertical
+Through hole straight pin header, 2x30, 1.27mm pitch, double rows
+Through hole pin header THT 2x30 1.27mm double row
+0
+60
+60
+Connector_PinHeader_1.27mm
+PinHeader_2x30_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x30, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x30 1.27mm double row
+0
+60
+60
+Connector_PinHeader_1.27mm
+PinHeader_2x31_P1.27mm_Horizontal
+Through hole angled pin header, 2x31, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x31 1.27mm double row
+0
+62
+62
+Connector_PinHeader_1.27mm
+PinHeader_2x31_P1.27mm_Vertical
+Through hole straight pin header, 2x31, 1.27mm pitch, double rows
+Through hole pin header THT 2x31 1.27mm double row
+0
+62
+62
+Connector_PinHeader_1.27mm
+PinHeader_2x31_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x31, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x31 1.27mm double row
+0
+62
+62
+Connector_PinHeader_1.27mm
+PinHeader_2x32_P1.27mm_Horizontal
+Through hole angled pin header, 2x32, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x32 1.27mm double row
+0
+64
+64
+Connector_PinHeader_1.27mm
+PinHeader_2x32_P1.27mm_Vertical
+Through hole straight pin header, 2x32, 1.27mm pitch, double rows
+Through hole pin header THT 2x32 1.27mm double row
+0
+64
+64
+Connector_PinHeader_1.27mm
+PinHeader_2x32_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x32, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x32 1.27mm double row
+0
+64
+64
+Connector_PinHeader_1.27mm
+PinHeader_2x33_P1.27mm_Horizontal
+Through hole angled pin header, 2x33, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x33 1.27mm double row
+0
+66
+66
+Connector_PinHeader_1.27mm
+PinHeader_2x33_P1.27mm_Vertical
+Through hole straight pin header, 2x33, 1.27mm pitch, double rows
+Through hole pin header THT 2x33 1.27mm double row
+0
+66
+66
+Connector_PinHeader_1.27mm
+PinHeader_2x33_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x33, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x33 1.27mm double row
+0
+66
+66
+Connector_PinHeader_1.27mm
+PinHeader_2x34_P1.27mm_Horizontal
+Through hole angled pin header, 2x34, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x34 1.27mm double row
+0
+68
+68
+Connector_PinHeader_1.27mm
+PinHeader_2x34_P1.27mm_Vertical
+Through hole straight pin header, 2x34, 1.27mm pitch, double rows
+Through hole pin header THT 2x34 1.27mm double row
+0
+68
+68
+Connector_PinHeader_1.27mm
+PinHeader_2x34_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x34, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x34 1.27mm double row
+0
+68
+68
+Connector_PinHeader_1.27mm
+PinHeader_2x35_P1.27mm_Horizontal
+Through hole angled pin header, 2x35, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x35 1.27mm double row
+0
+70
+70
+Connector_PinHeader_1.27mm
+PinHeader_2x35_P1.27mm_Vertical
+Through hole straight pin header, 2x35, 1.27mm pitch, double rows
+Through hole pin header THT 2x35 1.27mm double row
+0
+70
+70
+Connector_PinHeader_1.27mm
+PinHeader_2x35_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x35, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x35 1.27mm double row
+0
+70
+70
+Connector_PinHeader_1.27mm
+PinHeader_2x36_P1.27mm_Horizontal
+Through hole angled pin header, 2x36, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x36 1.27mm double row
+0
+72
+72
+Connector_PinHeader_1.27mm
+PinHeader_2x36_P1.27mm_Vertical
+Through hole straight pin header, 2x36, 1.27mm pitch, double rows
+Through hole pin header THT 2x36 1.27mm double row
+0
+72
+72
+Connector_PinHeader_1.27mm
+PinHeader_2x36_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x36, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x36 1.27mm double row
+0
+72
+72
+Connector_PinHeader_1.27mm
+PinHeader_2x37_P1.27mm_Horizontal
+Through hole angled pin header, 2x37, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x37 1.27mm double row
+0
+74
+74
+Connector_PinHeader_1.27mm
+PinHeader_2x37_P1.27mm_Vertical
+Through hole straight pin header, 2x37, 1.27mm pitch, double rows
+Through hole pin header THT 2x37 1.27mm double row
+0
+74
+74
+Connector_PinHeader_1.27mm
+PinHeader_2x37_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x37, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x37 1.27mm double row
+0
+74
+74
+Connector_PinHeader_1.27mm
+PinHeader_2x38_P1.27mm_Horizontal
+Through hole angled pin header, 2x38, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x38 1.27mm double row
+0
+76
+76
+Connector_PinHeader_1.27mm
+PinHeader_2x38_P1.27mm_Vertical
+Through hole straight pin header, 2x38, 1.27mm pitch, double rows
+Through hole pin header THT 2x38 1.27mm double row
+0
+76
+76
+Connector_PinHeader_1.27mm
+PinHeader_2x38_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x38, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x38 1.27mm double row
+0
+76
+76
+Connector_PinHeader_1.27mm
+PinHeader_2x39_P1.27mm_Horizontal
+Through hole angled pin header, 2x39, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x39 1.27mm double row
+0
+78
+78
+Connector_PinHeader_1.27mm
+PinHeader_2x39_P1.27mm_Vertical
+Through hole straight pin header, 2x39, 1.27mm pitch, double rows
+Through hole pin header THT 2x39 1.27mm double row
+0
+78
+78
+Connector_PinHeader_1.27mm
+PinHeader_2x39_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x39, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x39 1.27mm double row
+0
+78
+78
+Connector_PinHeader_1.27mm
+PinHeader_2x40_P1.27mm_Horizontal
+Through hole angled pin header, 2x40, 1.27mm pitch, 4.0mm pin length, double rows
+Through hole angled pin header THT 2x40 1.27mm double row
+0
+80
+80
+Connector_PinHeader_1.27mm
+PinHeader_2x40_P1.27mm_Vertical
+Through hole straight pin header, 2x40, 1.27mm pitch, double rows
+Through hole pin header THT 2x40 1.27mm double row
+0
+80
+80
+Connector_PinHeader_1.27mm
+PinHeader_2x40_P1.27mm_Vertical_SMD
+surface-mounted straight pin header, 2x40, 1.27mm pitch, double rows
+Surface mounted pin header SMD 2x40 1.27mm double row
+0
+80
+80
+Connector_PinHeader_2.00mm
+PinHeader_1x01_P2.00mm_Horizontal
+Through hole angled pin header, 1x01, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x01 2.00mm single row
+0
+1
+1
+Connector_PinHeader_2.00mm
+PinHeader_1x01_P2.00mm_Vertical
+Through hole straight pin header, 1x01, 2.00mm pitch, single row
+Through hole pin header THT 1x01 2.00mm single row
+0
+1
+1
+Connector_PinHeader_2.00mm
+PinHeader_1x02_P2.00mm_Horizontal
+Through hole angled pin header, 1x02, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x02 2.00mm single row
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_1x02_P2.00mm_Vertical
+Through hole straight pin header, 1x02, 2.00mm pitch, single row
+Through hole pin header THT 1x02 2.00mm single row
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x02, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x02 2.00mm single row style1 pin1 left
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x02, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x02 2.00mm single row style2 pin1 right
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_1x03_P2.00mm_Horizontal
+Through hole angled pin header, 1x03, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x03 2.00mm single row
+0
+3
+3
+Connector_PinHeader_2.00mm
+PinHeader_1x03_P2.00mm_Vertical
+Through hole straight pin header, 1x03, 2.00mm pitch, single row
+Through hole pin header THT 1x03 2.00mm single row
+0
+3
+3
+Connector_PinHeader_2.00mm
+PinHeader_1x03_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x03, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x03 2.00mm single row style1 pin1 left
+0
+3
+3
+Connector_PinHeader_2.00mm
+PinHeader_1x03_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x03, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x03 2.00mm single row style2 pin1 right
+0
+3
+3
+Connector_PinHeader_2.00mm
+PinHeader_1x04_P2.00mm_Horizontal
+Through hole angled pin header, 1x04, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x04 2.00mm single row
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_1x04_P2.00mm_Vertical
+Through hole straight pin header, 1x04, 2.00mm pitch, single row
+Through hole pin header THT 1x04 2.00mm single row
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x04, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x04 2.00mm single row style1 pin1 left
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x04, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x04 2.00mm single row style2 pin1 right
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_1x05_P2.00mm_Horizontal
+Through hole angled pin header, 1x05, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x05 2.00mm single row
+0
+5
+5
+Connector_PinHeader_2.00mm
+PinHeader_1x05_P2.00mm_Vertical
+Through hole straight pin header, 1x05, 2.00mm pitch, single row
+Through hole pin header THT 1x05 2.00mm single row
+0
+5
+5
+Connector_PinHeader_2.00mm
+PinHeader_1x05_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x05, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x05 2.00mm single row style1 pin1 left
+0
+5
+5
+Connector_PinHeader_2.00mm
+PinHeader_1x05_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x05, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x05 2.00mm single row style2 pin1 right
+0
+5
+5
+Connector_PinHeader_2.00mm
+PinHeader_1x06_P2.00mm_Horizontal
+Through hole angled pin header, 1x06, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x06 2.00mm single row
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_1x06_P2.00mm_Vertical
+Through hole straight pin header, 1x06, 2.00mm pitch, single row
+Through hole pin header THT 1x06 2.00mm single row
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_1x06_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x06, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x06 2.00mm single row style1 pin1 left
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_1x06_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x06, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x06 2.00mm single row style2 pin1 right
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_1x07_P2.00mm_Horizontal
+Through hole angled pin header, 1x07, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x07 2.00mm single row
+0
+7
+7
+Connector_PinHeader_2.00mm
+PinHeader_1x07_P2.00mm_Vertical
+Through hole straight pin header, 1x07, 2.00mm pitch, single row
+Through hole pin header THT 1x07 2.00mm single row
+0
+7
+7
+Connector_PinHeader_2.00mm
+PinHeader_1x07_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x07, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x07 2.00mm single row style1 pin1 left
+0
+7
+7
+Connector_PinHeader_2.00mm
+PinHeader_1x07_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x07, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x07 2.00mm single row style2 pin1 right
+0
+7
+7
+Connector_PinHeader_2.00mm
+PinHeader_1x08_P2.00mm_Horizontal
+Through hole angled pin header, 1x08, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x08 2.00mm single row
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_1x08_P2.00mm_Vertical
+Through hole straight pin header, 1x08, 2.00mm pitch, single row
+Through hole pin header THT 1x08 2.00mm single row
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_1x08_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x08, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x08 2.00mm single row style1 pin1 left
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_1x08_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x08, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x08 2.00mm single row style2 pin1 right
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_1x09_P2.00mm_Horizontal
+Through hole angled pin header, 1x09, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x09 2.00mm single row
+0
+9
+9
+Connector_PinHeader_2.00mm
+PinHeader_1x09_P2.00mm_Vertical
+Through hole straight pin header, 1x09, 2.00mm pitch, single row
+Through hole pin header THT 1x09 2.00mm single row
+0
+9
+9
+Connector_PinHeader_2.00mm
+PinHeader_1x09_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x09, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x09 2.00mm single row style1 pin1 left
+0
+9
+9
+Connector_PinHeader_2.00mm
+PinHeader_1x09_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x09, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x09 2.00mm single row style2 pin1 right
+0
+9
+9
+Connector_PinHeader_2.00mm
+PinHeader_1x10_P2.00mm_Horizontal
+Through hole angled pin header, 1x10, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x10 2.00mm single row
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_1x10_P2.00mm_Vertical
+Through hole straight pin header, 1x10, 2.00mm pitch, single row
+Through hole pin header THT 1x10 2.00mm single row
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_1x10_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x10, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x10 2.00mm single row style1 pin1 left
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_1x10_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x10, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x10 2.00mm single row style2 pin1 right
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_1x11_P2.00mm_Horizontal
+Through hole angled pin header, 1x11, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x11 2.00mm single row
+0
+11
+11
+Connector_PinHeader_2.00mm
+PinHeader_1x11_P2.00mm_Vertical
+Through hole straight pin header, 1x11, 2.00mm pitch, single row
+Through hole pin header THT 1x11 2.00mm single row
+0
+11
+11
+Connector_PinHeader_2.00mm
+PinHeader_1x11_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x11, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x11 2.00mm single row style1 pin1 left
+0
+11
+11
+Connector_PinHeader_2.00mm
+PinHeader_1x11_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x11, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x11 2.00mm single row style2 pin1 right
+0
+11
+11
+Connector_PinHeader_2.00mm
+PinHeader_1x12_P2.00mm_Horizontal
+Through hole angled pin header, 1x12, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x12 2.00mm single row
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_1x12_P2.00mm_Vertical
+Through hole straight pin header, 1x12, 2.00mm pitch, single row
+Through hole pin header THT 1x12 2.00mm single row
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_1x12_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x12, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x12 2.00mm single row style1 pin1 left
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_1x12_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x12, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x12 2.00mm single row style2 pin1 right
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_1x13_P2.00mm_Horizontal
+Through hole angled pin header, 1x13, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x13 2.00mm single row
+0
+13
+13
+Connector_PinHeader_2.00mm
+PinHeader_1x13_P2.00mm_Vertical
+Through hole straight pin header, 1x13, 2.00mm pitch, single row
+Through hole pin header THT 1x13 2.00mm single row
+0
+13
+13
+Connector_PinHeader_2.00mm
+PinHeader_1x13_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x13, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x13 2.00mm single row style1 pin1 left
+0
+13
+13
+Connector_PinHeader_2.00mm
+PinHeader_1x13_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x13, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x13 2.00mm single row style2 pin1 right
+0
+13
+13
+Connector_PinHeader_2.00mm
+PinHeader_1x14_P2.00mm_Horizontal
+Through hole angled pin header, 1x14, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x14 2.00mm single row
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_1x14_P2.00mm_Vertical
+Through hole straight pin header, 1x14, 2.00mm pitch, single row
+Through hole pin header THT 1x14 2.00mm single row
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_1x14_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x14, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x14 2.00mm single row style1 pin1 left
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_1x14_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x14, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x14 2.00mm single row style2 pin1 right
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_1x15_P2.00mm_Horizontal
+Through hole angled pin header, 1x15, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x15 2.00mm single row
+0
+15
+15
+Connector_PinHeader_2.00mm
+PinHeader_1x15_P2.00mm_Vertical
+Through hole straight pin header, 1x15, 2.00mm pitch, single row
+Through hole pin header THT 1x15 2.00mm single row
+0
+15
+15
+Connector_PinHeader_2.00mm
+PinHeader_1x15_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x15, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x15 2.00mm single row style1 pin1 left
+0
+15
+15
+Connector_PinHeader_2.00mm
+PinHeader_1x15_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x15, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x15 2.00mm single row style2 pin1 right
+0
+15
+15
+Connector_PinHeader_2.00mm
+PinHeader_1x16_P2.00mm_Horizontal
+Through hole angled pin header, 1x16, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x16 2.00mm single row
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_1x16_P2.00mm_Vertical
+Through hole straight pin header, 1x16, 2.00mm pitch, single row
+Through hole pin header THT 1x16 2.00mm single row
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_1x16_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x16, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x16 2.00mm single row style1 pin1 left
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_1x16_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x16, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x16 2.00mm single row style2 pin1 right
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_1x17_P2.00mm_Horizontal
+Through hole angled pin header, 1x17, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x17 2.00mm single row
+0
+17
+17
+Connector_PinHeader_2.00mm
+PinHeader_1x17_P2.00mm_Vertical
+Through hole straight pin header, 1x17, 2.00mm pitch, single row
+Through hole pin header THT 1x17 2.00mm single row
+0
+17
+17
+Connector_PinHeader_2.00mm
+PinHeader_1x17_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x17, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x17 2.00mm single row style1 pin1 left
+0
+17
+17
+Connector_PinHeader_2.00mm
+PinHeader_1x17_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x17, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x17 2.00mm single row style2 pin1 right
+0
+17
+17
+Connector_PinHeader_2.00mm
+PinHeader_1x18_P2.00mm_Horizontal
+Through hole angled pin header, 1x18, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x18 2.00mm single row
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_1x18_P2.00mm_Vertical
+Through hole straight pin header, 1x18, 2.00mm pitch, single row
+Through hole pin header THT 1x18 2.00mm single row
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_1x18_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x18, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x18 2.00mm single row style1 pin1 left
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_1x18_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x18, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x18 2.00mm single row style2 pin1 right
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_1x19_P2.00mm_Horizontal
+Through hole angled pin header, 1x19, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x19 2.00mm single row
+0
+19
+19
+Connector_PinHeader_2.00mm
+PinHeader_1x19_P2.00mm_Vertical
+Through hole straight pin header, 1x19, 2.00mm pitch, single row
+Through hole pin header THT 1x19 2.00mm single row
+0
+19
+19
+Connector_PinHeader_2.00mm
+PinHeader_1x19_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x19, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x19 2.00mm single row style1 pin1 left
+0
+19
+19
+Connector_PinHeader_2.00mm
+PinHeader_1x19_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x19, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x19 2.00mm single row style2 pin1 right
+0
+19
+19
+Connector_PinHeader_2.00mm
+PinHeader_1x20_P2.00mm_Horizontal
+Through hole angled pin header, 1x20, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x20 2.00mm single row
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_1x20_P2.00mm_Vertical
+Through hole straight pin header, 1x20, 2.00mm pitch, single row
+Through hole pin header THT 1x20 2.00mm single row
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_1x20_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x20, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x20 2.00mm single row style1 pin1 left
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_1x20_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x20, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x20 2.00mm single row style2 pin1 right
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_1x21_P2.00mm_Horizontal
+Through hole angled pin header, 1x21, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x21 2.00mm single row
+0
+21
+21
+Connector_PinHeader_2.00mm
+PinHeader_1x21_P2.00mm_Vertical
+Through hole straight pin header, 1x21, 2.00mm pitch, single row
+Through hole pin header THT 1x21 2.00mm single row
+0
+21
+21
+Connector_PinHeader_2.00mm
+PinHeader_1x21_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x21, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x21 2.00mm single row style1 pin1 left
+0
+21
+21
+Connector_PinHeader_2.00mm
+PinHeader_1x21_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x21, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x21 2.00mm single row style2 pin1 right
+0
+21
+21
+Connector_PinHeader_2.00mm
+PinHeader_1x22_P2.00mm_Horizontal
+Through hole angled pin header, 1x22, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x22 2.00mm single row
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_1x22_P2.00mm_Vertical
+Through hole straight pin header, 1x22, 2.00mm pitch, single row
+Through hole pin header THT 1x22 2.00mm single row
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_1x22_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x22, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x22 2.00mm single row style1 pin1 left
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_1x22_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x22, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x22 2.00mm single row style2 pin1 right
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_1x23_P2.00mm_Horizontal
+Through hole angled pin header, 1x23, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x23 2.00mm single row
+0
+23
+23
+Connector_PinHeader_2.00mm
+PinHeader_1x23_P2.00mm_Vertical
+Through hole straight pin header, 1x23, 2.00mm pitch, single row
+Through hole pin header THT 1x23 2.00mm single row
+0
+23
+23
+Connector_PinHeader_2.00mm
+PinHeader_1x23_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x23, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x23 2.00mm single row style1 pin1 left
+0
+23
+23
+Connector_PinHeader_2.00mm
+PinHeader_1x23_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x23, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x23 2.00mm single row style2 pin1 right
+0
+23
+23
+Connector_PinHeader_2.00mm
+PinHeader_1x24_P2.00mm_Horizontal
+Through hole angled pin header, 1x24, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x24 2.00mm single row
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_1x24_P2.00mm_Vertical
+Through hole straight pin header, 1x24, 2.00mm pitch, single row
+Through hole pin header THT 1x24 2.00mm single row
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_1x24_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x24, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x24 2.00mm single row style1 pin1 left
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_1x24_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x24, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x24 2.00mm single row style2 pin1 right
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_1x25_P2.00mm_Horizontal
+Through hole angled pin header, 1x25, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x25 2.00mm single row
+0
+25
+25
+Connector_PinHeader_2.00mm
+PinHeader_1x25_P2.00mm_Vertical
+Through hole straight pin header, 1x25, 2.00mm pitch, single row
+Through hole pin header THT 1x25 2.00mm single row
+0
+25
+25
+Connector_PinHeader_2.00mm
+PinHeader_1x25_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x25, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x25 2.00mm single row style1 pin1 left
+0
+25
+25
+Connector_PinHeader_2.00mm
+PinHeader_1x25_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x25, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x25 2.00mm single row style2 pin1 right
+0
+25
+25
+Connector_PinHeader_2.00mm
+PinHeader_1x26_P2.00mm_Horizontal
+Through hole angled pin header, 1x26, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x26 2.00mm single row
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_1x26_P2.00mm_Vertical
+Through hole straight pin header, 1x26, 2.00mm pitch, single row
+Through hole pin header THT 1x26 2.00mm single row
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_1x26_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x26, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x26 2.00mm single row style1 pin1 left
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_1x26_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x26, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x26 2.00mm single row style2 pin1 right
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_1x27_P2.00mm_Horizontal
+Through hole angled pin header, 1x27, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x27 2.00mm single row
+0
+27
+27
+Connector_PinHeader_2.00mm
+PinHeader_1x27_P2.00mm_Vertical
+Through hole straight pin header, 1x27, 2.00mm pitch, single row
+Through hole pin header THT 1x27 2.00mm single row
+0
+27
+27
+Connector_PinHeader_2.00mm
+PinHeader_1x27_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x27, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x27 2.00mm single row style1 pin1 left
+0
+27
+27
+Connector_PinHeader_2.00mm
+PinHeader_1x27_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x27, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x27 2.00mm single row style2 pin1 right
+0
+27
+27
+Connector_PinHeader_2.00mm
+PinHeader_1x28_P2.00mm_Horizontal
+Through hole angled pin header, 1x28, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x28 2.00mm single row
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_1x28_P2.00mm_Vertical
+Through hole straight pin header, 1x28, 2.00mm pitch, single row
+Through hole pin header THT 1x28 2.00mm single row
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_1x28_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x28, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x28 2.00mm single row style1 pin1 left
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_1x28_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x28, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x28 2.00mm single row style2 pin1 right
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_1x29_P2.00mm_Horizontal
+Through hole angled pin header, 1x29, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x29 2.00mm single row
+0
+29
+29
+Connector_PinHeader_2.00mm
+PinHeader_1x29_P2.00mm_Vertical
+Through hole straight pin header, 1x29, 2.00mm pitch, single row
+Through hole pin header THT 1x29 2.00mm single row
+0
+29
+29
+Connector_PinHeader_2.00mm
+PinHeader_1x29_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x29, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x29 2.00mm single row style1 pin1 left
+0
+29
+29
+Connector_PinHeader_2.00mm
+PinHeader_1x29_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x29, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x29 2.00mm single row style2 pin1 right
+0
+29
+29
+Connector_PinHeader_2.00mm
+PinHeader_1x30_P2.00mm_Horizontal
+Through hole angled pin header, 1x30, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x30 2.00mm single row
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_1x30_P2.00mm_Vertical
+Through hole straight pin header, 1x30, 2.00mm pitch, single row
+Through hole pin header THT 1x30 2.00mm single row
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_1x30_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x30, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x30 2.00mm single row style1 pin1 left
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_1x30_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x30, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x30 2.00mm single row style2 pin1 right
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_1x31_P2.00mm_Horizontal
+Through hole angled pin header, 1x31, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x31 2.00mm single row
+0
+31
+31
+Connector_PinHeader_2.00mm
+PinHeader_1x31_P2.00mm_Vertical
+Through hole straight pin header, 1x31, 2.00mm pitch, single row
+Through hole pin header THT 1x31 2.00mm single row
+0
+31
+31
+Connector_PinHeader_2.00mm
+PinHeader_1x31_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x31, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x31 2.00mm single row style1 pin1 left
+0
+31
+31
+Connector_PinHeader_2.00mm
+PinHeader_1x31_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x31, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x31 2.00mm single row style2 pin1 right
+0
+31
+31
+Connector_PinHeader_2.00mm
+PinHeader_1x32_P2.00mm_Horizontal
+Through hole angled pin header, 1x32, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x32 2.00mm single row
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_1x32_P2.00mm_Vertical
+Through hole straight pin header, 1x32, 2.00mm pitch, single row
+Through hole pin header THT 1x32 2.00mm single row
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_1x32_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x32, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x32 2.00mm single row style1 pin1 left
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_1x32_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x32, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x32 2.00mm single row style2 pin1 right
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_1x33_P2.00mm_Horizontal
+Through hole angled pin header, 1x33, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x33 2.00mm single row
+0
+33
+33
+Connector_PinHeader_2.00mm
+PinHeader_1x33_P2.00mm_Vertical
+Through hole straight pin header, 1x33, 2.00mm pitch, single row
+Through hole pin header THT 1x33 2.00mm single row
+0
+33
+33
+Connector_PinHeader_2.00mm
+PinHeader_1x33_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x33, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x33 2.00mm single row style1 pin1 left
+0
+33
+33
+Connector_PinHeader_2.00mm
+PinHeader_1x33_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x33, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x33 2.00mm single row style2 pin1 right
+0
+33
+33
+Connector_PinHeader_2.00mm
+PinHeader_1x34_P2.00mm_Horizontal
+Through hole angled pin header, 1x34, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x34 2.00mm single row
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_1x34_P2.00mm_Vertical
+Through hole straight pin header, 1x34, 2.00mm pitch, single row
+Through hole pin header THT 1x34 2.00mm single row
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_1x34_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x34, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x34 2.00mm single row style1 pin1 left
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_1x34_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x34, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x34 2.00mm single row style2 pin1 right
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_1x35_P2.00mm_Horizontal
+Through hole angled pin header, 1x35, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x35 2.00mm single row
+0
+35
+35
+Connector_PinHeader_2.00mm
+PinHeader_1x35_P2.00mm_Vertical
+Through hole straight pin header, 1x35, 2.00mm pitch, single row
+Through hole pin header THT 1x35 2.00mm single row
+0
+35
+35
+Connector_PinHeader_2.00mm
+PinHeader_1x35_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x35, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x35 2.00mm single row style1 pin1 left
+0
+35
+35
+Connector_PinHeader_2.00mm
+PinHeader_1x35_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x35, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x35 2.00mm single row style2 pin1 right
+0
+35
+35
+Connector_PinHeader_2.00mm
+PinHeader_1x36_P2.00mm_Horizontal
+Through hole angled pin header, 1x36, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x36 2.00mm single row
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_1x36_P2.00mm_Vertical
+Through hole straight pin header, 1x36, 2.00mm pitch, single row
+Through hole pin header THT 1x36 2.00mm single row
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_1x36_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x36, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x36 2.00mm single row style1 pin1 left
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_1x36_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x36, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x36 2.00mm single row style2 pin1 right
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_1x37_P2.00mm_Horizontal
+Through hole angled pin header, 1x37, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x37 2.00mm single row
+0
+37
+37
+Connector_PinHeader_2.00mm
+PinHeader_1x37_P2.00mm_Vertical
+Through hole straight pin header, 1x37, 2.00mm pitch, single row
+Through hole pin header THT 1x37 2.00mm single row
+0
+37
+37
+Connector_PinHeader_2.00mm
+PinHeader_1x37_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x37, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x37 2.00mm single row style1 pin1 left
+0
+37
+37
+Connector_PinHeader_2.00mm
+PinHeader_1x37_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x37, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x37 2.00mm single row style2 pin1 right
+0
+37
+37
+Connector_PinHeader_2.00mm
+PinHeader_1x38_P2.00mm_Horizontal
+Through hole angled pin header, 1x38, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x38 2.00mm single row
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_1x38_P2.00mm_Vertical
+Through hole straight pin header, 1x38, 2.00mm pitch, single row
+Through hole pin header THT 1x38 2.00mm single row
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_1x38_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x38, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x38 2.00mm single row style1 pin1 left
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_1x38_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x38, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x38 2.00mm single row style2 pin1 right
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_1x39_P2.00mm_Horizontal
+Through hole angled pin header, 1x39, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x39 2.00mm single row
+0
+39
+39
+Connector_PinHeader_2.00mm
+PinHeader_1x39_P2.00mm_Vertical
+Through hole straight pin header, 1x39, 2.00mm pitch, single row
+Through hole pin header THT 1x39 2.00mm single row
+0
+39
+39
+Connector_PinHeader_2.00mm
+PinHeader_1x39_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x39, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x39 2.00mm single row style1 pin1 left
+0
+39
+39
+Connector_PinHeader_2.00mm
+PinHeader_1x39_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x39, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x39 2.00mm single row style2 pin1 right
+0
+39
+39
+Connector_PinHeader_2.00mm
+PinHeader_1x40_P2.00mm_Horizontal
+Through hole angled pin header, 1x40, 2.00mm pitch, 4.2mm pin length, single row
+Through hole angled pin header THT 1x40 2.00mm single row
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_1x40_P2.00mm_Vertical
+Through hole straight pin header, 1x40, 2.00mm pitch, single row
+Through hole pin header THT 1x40 2.00mm single row
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_1x40_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x40, 2.00mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x40 2.00mm single row style1 pin1 left
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_1x40_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x40, 2.00mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x40 2.00mm single row style2 pin1 right
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_2x01_P2.00mm_Horizontal
+Through hole angled pin header, 2x01, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x01 2.00mm double row
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_2x01_P2.00mm_Vertical
+Through hole straight pin header, 2x01, 2.00mm pitch, double rows
+Through hole pin header THT 2x01 2.00mm double row
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_2x01_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x01, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x01 2.00mm double row
+0
+2
+2
+Connector_PinHeader_2.00mm
+PinHeader_2x02_P2.00mm_Horizontal
+Through hole angled pin header, 2x02, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x02 2.00mm double row
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_2x02_P2.00mm_Vertical
+Through hole straight pin header, 2x02, 2.00mm pitch, double rows
+Through hole pin header THT 2x02 2.00mm double row
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_2x02_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x02, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x02 2.00mm double row
+0
+4
+4
+Connector_PinHeader_2.00mm
+PinHeader_2x03_P2.00mm_Horizontal
+Through hole angled pin header, 2x03, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x03 2.00mm double row
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_2x03_P2.00mm_Vertical
+Through hole straight pin header, 2x03, 2.00mm pitch, double rows
+Through hole pin header THT 2x03 2.00mm double row
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_2x03_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x03, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x03 2.00mm double row
+0
+6
+6
+Connector_PinHeader_2.00mm
+PinHeader_2x04_P2.00mm_Horizontal
+Through hole angled pin header, 2x04, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x04 2.00mm double row
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_2x04_P2.00mm_Vertical
+Through hole straight pin header, 2x04, 2.00mm pitch, double rows
+Through hole pin header THT 2x04 2.00mm double row
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_2x04_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x04, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x04 2.00mm double row
+0
+8
+8
+Connector_PinHeader_2.00mm
+PinHeader_2x05_P2.00mm_Horizontal
+Through hole angled pin header, 2x05, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x05 2.00mm double row
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_2x05_P2.00mm_Vertical
+Through hole straight pin header, 2x05, 2.00mm pitch, double rows
+Through hole pin header THT 2x05 2.00mm double row
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_2x05_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x05, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x05 2.00mm double row
+0
+10
+10
+Connector_PinHeader_2.00mm
+PinHeader_2x06_P2.00mm_Horizontal
+Through hole angled pin header, 2x06, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x06 2.00mm double row
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_2x06_P2.00mm_Vertical
+Through hole straight pin header, 2x06, 2.00mm pitch, double rows
+Through hole pin header THT 2x06 2.00mm double row
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_2x06_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x06, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x06 2.00mm double row
+0
+12
+12
+Connector_PinHeader_2.00mm
+PinHeader_2x07_P2.00mm_Horizontal
+Through hole angled pin header, 2x07, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x07 2.00mm double row
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_2x07_P2.00mm_Vertical
+Through hole straight pin header, 2x07, 2.00mm pitch, double rows
+Through hole pin header THT 2x07 2.00mm double row
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_2x07_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x07, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x07 2.00mm double row
+0
+14
+14
+Connector_PinHeader_2.00mm
+PinHeader_2x08_P2.00mm_Horizontal
+Through hole angled pin header, 2x08, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x08 2.00mm double row
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_2x08_P2.00mm_Vertical
+Through hole straight pin header, 2x08, 2.00mm pitch, double rows
+Through hole pin header THT 2x08 2.00mm double row
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_2x08_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x08, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x08 2.00mm double row
+0
+16
+16
+Connector_PinHeader_2.00mm
+PinHeader_2x09_P2.00mm_Horizontal
+Through hole angled pin header, 2x09, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x09 2.00mm double row
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_2x09_P2.00mm_Vertical
+Through hole straight pin header, 2x09, 2.00mm pitch, double rows
+Through hole pin header THT 2x09 2.00mm double row
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_2x09_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x09, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x09 2.00mm double row
+0
+18
+18
+Connector_PinHeader_2.00mm
+PinHeader_2x10_P2.00mm_Horizontal
+Through hole angled pin header, 2x10, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x10 2.00mm double row
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_2x10_P2.00mm_Vertical
+Through hole straight pin header, 2x10, 2.00mm pitch, double rows
+Through hole pin header THT 2x10 2.00mm double row
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_2x10_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x10, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x10 2.00mm double row
+0
+20
+20
+Connector_PinHeader_2.00mm
+PinHeader_2x11_P2.00mm_Horizontal
+Through hole angled pin header, 2x11, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x11 2.00mm double row
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_2x11_P2.00mm_Vertical
+Through hole straight pin header, 2x11, 2.00mm pitch, double rows
+Through hole pin header THT 2x11 2.00mm double row
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_2x11_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x11, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x11 2.00mm double row
+0
+22
+22
+Connector_PinHeader_2.00mm
+PinHeader_2x12_P2.00mm_Horizontal
+Through hole angled pin header, 2x12, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x12 2.00mm double row
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_2x12_P2.00mm_Vertical
+Through hole straight pin header, 2x12, 2.00mm pitch, double rows
+Through hole pin header THT 2x12 2.00mm double row
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_2x12_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x12, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x12 2.00mm double row
+0
+24
+24
+Connector_PinHeader_2.00mm
+PinHeader_2x13_P2.00mm_Horizontal
+Through hole angled pin header, 2x13, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x13 2.00mm double row
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_2x13_P2.00mm_Vertical
+Through hole straight pin header, 2x13, 2.00mm pitch, double rows
+Through hole pin header THT 2x13 2.00mm double row
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_2x13_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x13, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x13 2.00mm double row
+0
+26
+26
+Connector_PinHeader_2.00mm
+PinHeader_2x14_P2.00mm_Horizontal
+Through hole angled pin header, 2x14, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x14 2.00mm double row
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_2x14_P2.00mm_Vertical
+Through hole straight pin header, 2x14, 2.00mm pitch, double rows
+Through hole pin header THT 2x14 2.00mm double row
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_2x14_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x14, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x14 2.00mm double row
+0
+28
+28
+Connector_PinHeader_2.00mm
+PinHeader_2x15_P2.00mm_Horizontal
+Through hole angled pin header, 2x15, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x15 2.00mm double row
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_2x15_P2.00mm_Vertical
+Through hole straight pin header, 2x15, 2.00mm pitch, double rows
+Through hole pin header THT 2x15 2.00mm double row
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_2x15_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x15, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x15 2.00mm double row
+0
+30
+30
+Connector_PinHeader_2.00mm
+PinHeader_2x16_P2.00mm_Horizontal
+Through hole angled pin header, 2x16, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x16 2.00mm double row
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_2x16_P2.00mm_Vertical
+Through hole straight pin header, 2x16, 2.00mm pitch, double rows
+Through hole pin header THT 2x16 2.00mm double row
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_2x16_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x16, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x16 2.00mm double row
+0
+32
+32
+Connector_PinHeader_2.00mm
+PinHeader_2x17_P2.00mm_Horizontal
+Through hole angled pin header, 2x17, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x17 2.00mm double row
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_2x17_P2.00mm_Vertical
+Through hole straight pin header, 2x17, 2.00mm pitch, double rows
+Through hole pin header THT 2x17 2.00mm double row
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_2x17_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x17, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x17 2.00mm double row
+0
+34
+34
+Connector_PinHeader_2.00mm
+PinHeader_2x18_P2.00mm_Horizontal
+Through hole angled pin header, 2x18, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x18 2.00mm double row
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_2x18_P2.00mm_Vertical
+Through hole straight pin header, 2x18, 2.00mm pitch, double rows
+Through hole pin header THT 2x18 2.00mm double row
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_2x18_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x18, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x18 2.00mm double row
+0
+36
+36
+Connector_PinHeader_2.00mm
+PinHeader_2x19_P2.00mm_Horizontal
+Through hole angled pin header, 2x19, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x19 2.00mm double row
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_2x19_P2.00mm_Vertical
+Through hole straight pin header, 2x19, 2.00mm pitch, double rows
+Through hole pin header THT 2x19 2.00mm double row
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_2x19_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x19, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x19 2.00mm double row
+0
+38
+38
+Connector_PinHeader_2.00mm
+PinHeader_2x20_P2.00mm_Horizontal
+Through hole angled pin header, 2x20, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x20 2.00mm double row
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_2x20_P2.00mm_Vertical
+Through hole straight pin header, 2x20, 2.00mm pitch, double rows
+Through hole pin header THT 2x20 2.00mm double row
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_2x20_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x20, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x20 2.00mm double row
+0
+40
+40
+Connector_PinHeader_2.00mm
+PinHeader_2x21_P2.00mm_Horizontal
+Through hole angled pin header, 2x21, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x21 2.00mm double row
+0
+42
+42
+Connector_PinHeader_2.00mm
+PinHeader_2x21_P2.00mm_Vertical
+Through hole straight pin header, 2x21, 2.00mm pitch, double rows
+Through hole pin header THT 2x21 2.00mm double row
+0
+42
+42
+Connector_PinHeader_2.00mm
+PinHeader_2x21_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x21, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x21 2.00mm double row
+0
+42
+42
+Connector_PinHeader_2.00mm
+PinHeader_2x22_P2.00mm_Horizontal
+Through hole angled pin header, 2x22, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x22 2.00mm double row
+0
+44
+44
+Connector_PinHeader_2.00mm
+PinHeader_2x22_P2.00mm_Vertical
+Through hole straight pin header, 2x22, 2.00mm pitch, double rows
+Through hole pin header THT 2x22 2.00mm double row
+0
+44
+44
+Connector_PinHeader_2.00mm
+PinHeader_2x22_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x22, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x22 2.00mm double row
+0
+44
+44
+Connector_PinHeader_2.00mm
+PinHeader_2x23_P2.00mm_Horizontal
+Through hole angled pin header, 2x23, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x23 2.00mm double row
+0
+46
+46
+Connector_PinHeader_2.00mm
+PinHeader_2x23_P2.00mm_Vertical
+Through hole straight pin header, 2x23, 2.00mm pitch, double rows
+Through hole pin header THT 2x23 2.00mm double row
+0
+46
+46
+Connector_PinHeader_2.00mm
+PinHeader_2x23_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x23, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x23 2.00mm double row
+0
+46
+46
+Connector_PinHeader_2.00mm
+PinHeader_2x24_P2.00mm_Horizontal
+Through hole angled pin header, 2x24, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x24 2.00mm double row
+0
+48
+48
+Connector_PinHeader_2.00mm
+PinHeader_2x24_P2.00mm_Vertical
+Through hole straight pin header, 2x24, 2.00mm pitch, double rows
+Through hole pin header THT 2x24 2.00mm double row
+0
+48
+48
+Connector_PinHeader_2.00mm
+PinHeader_2x24_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x24, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x24 2.00mm double row
+0
+48
+48
+Connector_PinHeader_2.00mm
+PinHeader_2x25_P2.00mm_Horizontal
+Through hole angled pin header, 2x25, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x25 2.00mm double row
+0
+50
+50
+Connector_PinHeader_2.00mm
+PinHeader_2x25_P2.00mm_Vertical
+Through hole straight pin header, 2x25, 2.00mm pitch, double rows
+Through hole pin header THT 2x25 2.00mm double row
+0
+50
+50
+Connector_PinHeader_2.00mm
+PinHeader_2x25_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x25, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x25 2.00mm double row
+0
+50
+50
+Connector_PinHeader_2.00mm
+PinHeader_2x26_P2.00mm_Horizontal
+Through hole angled pin header, 2x26, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x26 2.00mm double row
+0
+52
+52
+Connector_PinHeader_2.00mm
+PinHeader_2x26_P2.00mm_Vertical
+Through hole straight pin header, 2x26, 2.00mm pitch, double rows
+Through hole pin header THT 2x26 2.00mm double row
+0
+52
+52
+Connector_PinHeader_2.00mm
+PinHeader_2x26_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x26, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x26 2.00mm double row
+0
+52
+52
+Connector_PinHeader_2.00mm
+PinHeader_2x27_P2.00mm_Horizontal
+Through hole angled pin header, 2x27, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x27 2.00mm double row
+0
+54
+54
+Connector_PinHeader_2.00mm
+PinHeader_2x27_P2.00mm_Vertical
+Through hole straight pin header, 2x27, 2.00mm pitch, double rows
+Through hole pin header THT 2x27 2.00mm double row
+0
+54
+54
+Connector_PinHeader_2.00mm
+PinHeader_2x27_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x27, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x27 2.00mm double row
+0
+54
+54
+Connector_PinHeader_2.00mm
+PinHeader_2x28_P2.00mm_Horizontal
+Through hole angled pin header, 2x28, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x28 2.00mm double row
+0
+56
+56
+Connector_PinHeader_2.00mm
+PinHeader_2x28_P2.00mm_Vertical
+Through hole straight pin header, 2x28, 2.00mm pitch, double rows
+Through hole pin header THT 2x28 2.00mm double row
+0
+56
+56
+Connector_PinHeader_2.00mm
+PinHeader_2x28_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x28, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x28 2.00mm double row
+0
+56
+56
+Connector_PinHeader_2.00mm
+PinHeader_2x29_P2.00mm_Horizontal
+Through hole angled pin header, 2x29, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x29 2.00mm double row
+0
+58
+58
+Connector_PinHeader_2.00mm
+PinHeader_2x29_P2.00mm_Vertical
+Through hole straight pin header, 2x29, 2.00mm pitch, double rows
+Through hole pin header THT 2x29 2.00mm double row
+0
+58
+58
+Connector_PinHeader_2.00mm
+PinHeader_2x29_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x29, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x29 2.00mm double row
+0
+58
+58
+Connector_PinHeader_2.00mm
+PinHeader_2x30_P2.00mm_Horizontal
+Through hole angled pin header, 2x30, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x30 2.00mm double row
+0
+60
+60
+Connector_PinHeader_2.00mm
+PinHeader_2x30_P2.00mm_Vertical
+Through hole straight pin header, 2x30, 2.00mm pitch, double rows
+Through hole pin header THT 2x30 2.00mm double row
+0
+60
+60
+Connector_PinHeader_2.00mm
+PinHeader_2x30_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x30, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x30 2.00mm double row
+0
+60
+60
+Connector_PinHeader_2.00mm
+PinHeader_2x31_P2.00mm_Horizontal
+Through hole angled pin header, 2x31, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x31 2.00mm double row
+0
+62
+62
+Connector_PinHeader_2.00mm
+PinHeader_2x31_P2.00mm_Vertical
+Through hole straight pin header, 2x31, 2.00mm pitch, double rows
+Through hole pin header THT 2x31 2.00mm double row
+0
+62
+62
+Connector_PinHeader_2.00mm
+PinHeader_2x31_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x31, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x31 2.00mm double row
+0
+62
+62
+Connector_PinHeader_2.00mm
+PinHeader_2x32_P2.00mm_Horizontal
+Through hole angled pin header, 2x32, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x32 2.00mm double row
+0
+64
+64
+Connector_PinHeader_2.00mm
+PinHeader_2x32_P2.00mm_Vertical
+Through hole straight pin header, 2x32, 2.00mm pitch, double rows
+Through hole pin header THT 2x32 2.00mm double row
+0
+64
+64
+Connector_PinHeader_2.00mm
+PinHeader_2x32_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x32, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x32 2.00mm double row
+0
+64
+64
+Connector_PinHeader_2.00mm
+PinHeader_2x33_P2.00mm_Horizontal
+Through hole angled pin header, 2x33, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x33 2.00mm double row
+0
+66
+66
+Connector_PinHeader_2.00mm
+PinHeader_2x33_P2.00mm_Vertical
+Through hole straight pin header, 2x33, 2.00mm pitch, double rows
+Through hole pin header THT 2x33 2.00mm double row
+0
+66
+66
+Connector_PinHeader_2.00mm
+PinHeader_2x33_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x33, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x33 2.00mm double row
+0
+66
+66
+Connector_PinHeader_2.00mm
+PinHeader_2x34_P2.00mm_Horizontal
+Through hole angled pin header, 2x34, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x34 2.00mm double row
+0
+68
+68
+Connector_PinHeader_2.00mm
+PinHeader_2x34_P2.00mm_Vertical
+Through hole straight pin header, 2x34, 2.00mm pitch, double rows
+Through hole pin header THT 2x34 2.00mm double row
+0
+68
+68
+Connector_PinHeader_2.00mm
+PinHeader_2x34_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x34, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x34 2.00mm double row
+0
+68
+68
+Connector_PinHeader_2.00mm
+PinHeader_2x35_P2.00mm_Horizontal
+Through hole angled pin header, 2x35, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x35 2.00mm double row
+0
+70
+70
+Connector_PinHeader_2.00mm
+PinHeader_2x35_P2.00mm_Vertical
+Through hole straight pin header, 2x35, 2.00mm pitch, double rows
+Through hole pin header THT 2x35 2.00mm double row
+0
+70
+70
+Connector_PinHeader_2.00mm
+PinHeader_2x35_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x35, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x35 2.00mm double row
+0
+70
+70
+Connector_PinHeader_2.00mm
+PinHeader_2x36_P2.00mm_Horizontal
+Through hole angled pin header, 2x36, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x36 2.00mm double row
+0
+72
+72
+Connector_PinHeader_2.00mm
+PinHeader_2x36_P2.00mm_Vertical
+Through hole straight pin header, 2x36, 2.00mm pitch, double rows
+Through hole pin header THT 2x36 2.00mm double row
+0
+72
+72
+Connector_PinHeader_2.00mm
+PinHeader_2x36_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x36, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x36 2.00mm double row
+0
+72
+72
+Connector_PinHeader_2.00mm
+PinHeader_2x37_P2.00mm_Horizontal
+Through hole angled pin header, 2x37, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x37 2.00mm double row
+0
+74
+74
+Connector_PinHeader_2.00mm
+PinHeader_2x37_P2.00mm_Vertical
+Through hole straight pin header, 2x37, 2.00mm pitch, double rows
+Through hole pin header THT 2x37 2.00mm double row
+0
+74
+74
+Connector_PinHeader_2.00mm
+PinHeader_2x37_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x37, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x37 2.00mm double row
+0
+74
+74
+Connector_PinHeader_2.00mm
+PinHeader_2x38_P2.00mm_Horizontal
+Through hole angled pin header, 2x38, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x38 2.00mm double row
+0
+76
+76
+Connector_PinHeader_2.00mm
+PinHeader_2x38_P2.00mm_Vertical
+Through hole straight pin header, 2x38, 2.00mm pitch, double rows
+Through hole pin header THT 2x38 2.00mm double row
+0
+76
+76
+Connector_PinHeader_2.00mm
+PinHeader_2x38_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x38, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x38 2.00mm double row
+0
+76
+76
+Connector_PinHeader_2.00mm
+PinHeader_2x39_P2.00mm_Horizontal
+Through hole angled pin header, 2x39, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x39 2.00mm double row
+0
+78
+78
+Connector_PinHeader_2.00mm
+PinHeader_2x39_P2.00mm_Vertical
+Through hole straight pin header, 2x39, 2.00mm pitch, double rows
+Through hole pin header THT 2x39 2.00mm double row
+0
+78
+78
+Connector_PinHeader_2.00mm
+PinHeader_2x39_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x39, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x39 2.00mm double row
+0
+78
+78
+Connector_PinHeader_2.00mm
+PinHeader_2x40_P2.00mm_Horizontal
+Through hole angled pin header, 2x40, 2.00mm pitch, 4.2mm pin length, double rows
+Through hole angled pin header THT 2x40 2.00mm double row
+0
+80
+80
+Connector_PinHeader_2.00mm
+PinHeader_2x40_P2.00mm_Vertical
+Through hole straight pin header, 2x40, 2.00mm pitch, double rows
+Through hole pin header THT 2x40 2.00mm double row
+0
+80
+80
+Connector_PinHeader_2.00mm
+PinHeader_2x40_P2.00mm_Vertical_SMD
+surface-mounted straight pin header, 2x40, 2.00mm pitch, double rows
+Surface mounted pin header SMD 2x40 2.00mm double row
+0
+80
+80
+Connector_PinHeader_2.54mm
+PinHeader_1x01_P2.54mm_Horizontal
+Through hole angled pin header, 1x01, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x01 2.54mm single row
+0
+1
+1
+Connector_PinHeader_2.54mm
+PinHeader_1x01_P2.54mm_Vertical
+Through hole straight pin header, 1x01, 2.54mm pitch, single row
+Through hole pin header THT 1x01 2.54mm single row
+0
+1
+1
+Connector_PinHeader_2.54mm
+PinHeader_1x02_P2.54mm_Horizontal
+Through hole angled pin header, 1x02, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x02 2.54mm single row
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_1x02_P2.54mm_Vertical
+Through hole straight pin header, 1x02, 2.54mm pitch, single row
+Through hole pin header THT 1x02 2.54mm single row
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x02, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x02 2.54mm single row style1 pin1 left
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x02, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x02 2.54mm single row style2 pin1 right
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_1x03_P2.54mm_Horizontal
+Through hole angled pin header, 1x03, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x03 2.54mm single row
+0
+3
+3
+Connector_PinHeader_2.54mm
+PinHeader_1x03_P2.54mm_Vertical
+Through hole straight pin header, 1x03, 2.54mm pitch, single row
+Through hole pin header THT 1x03 2.54mm single row
+0
+3
+3
+Connector_PinHeader_2.54mm
+PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x03, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x03 2.54mm single row style1 pin1 left
+0
+3
+3
+Connector_PinHeader_2.54mm
+PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x03, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x03 2.54mm single row style2 pin1 right
+0
+3
+3
+Connector_PinHeader_2.54mm
+PinHeader_1x04_P2.54mm_Horizontal
+Through hole angled pin header, 1x04, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x04 2.54mm single row
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_1x04_P2.54mm_Vertical
+Through hole straight pin header, 1x04, 2.54mm pitch, single row
+Through hole pin header THT 1x04 2.54mm single row
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x04, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x04 2.54mm single row style1 pin1 left
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x04, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x04 2.54mm single row style2 pin1 right
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_1x05_P2.54mm_Horizontal
+Through hole angled pin header, 1x05, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x05 2.54mm single row
+0
+5
+5
+Connector_PinHeader_2.54mm
+PinHeader_1x05_P2.54mm_Vertical
+Through hole straight pin header, 1x05, 2.54mm pitch, single row
+Through hole pin header THT 1x05 2.54mm single row
+0
+5
+5
+Connector_PinHeader_2.54mm
+PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x05, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x05 2.54mm single row style1 pin1 left
+0
+5
+5
+Connector_PinHeader_2.54mm
+PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x05, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x05 2.54mm single row style2 pin1 right
+0
+5
+5
+Connector_PinHeader_2.54mm
+PinHeader_1x06_P2.54mm_Horizontal
+Through hole angled pin header, 1x06, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x06 2.54mm single row
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_1x06_P2.54mm_Vertical
+Through hole straight pin header, 1x06, 2.54mm pitch, single row
+Through hole pin header THT 1x06 2.54mm single row
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x06, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x06 2.54mm single row style1 pin1 left
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x06, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x06 2.54mm single row style2 pin1 right
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_1x07_P2.54mm_Horizontal
+Through hole angled pin header, 1x07, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x07 2.54mm single row
+0
+7
+7
+Connector_PinHeader_2.54mm
+PinHeader_1x07_P2.54mm_Vertical
+Through hole straight pin header, 1x07, 2.54mm pitch, single row
+Through hole pin header THT 1x07 2.54mm single row
+0
+7
+7
+Connector_PinHeader_2.54mm
+PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x07, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x07 2.54mm single row style1 pin1 left
+0
+7
+7
+Connector_PinHeader_2.54mm
+PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x07, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x07 2.54mm single row style2 pin1 right
+0
+7
+7
+Connector_PinHeader_2.54mm
+PinHeader_1x08_P2.54mm_Horizontal
+Through hole angled pin header, 1x08, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x08 2.54mm single row
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_1x08_P2.54mm_Vertical
+Through hole straight pin header, 1x08, 2.54mm pitch, single row
+Through hole pin header THT 1x08 2.54mm single row
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x08, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x08 2.54mm single row style1 pin1 left
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x08, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x08 2.54mm single row style2 pin1 right
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_1x09_P2.54mm_Horizontal
+Through hole angled pin header, 1x09, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x09 2.54mm single row
+0
+9
+9
+Connector_PinHeader_2.54mm
+PinHeader_1x09_P2.54mm_Vertical
+Through hole straight pin header, 1x09, 2.54mm pitch, single row
+Through hole pin header THT 1x09 2.54mm single row
+0
+9
+9
+Connector_PinHeader_2.54mm
+PinHeader_1x09_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x09, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x09 2.54mm single row style1 pin1 left
+0
+9
+9
+Connector_PinHeader_2.54mm
+PinHeader_1x09_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x09, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x09 2.54mm single row style2 pin1 right
+0
+9
+9
+Connector_PinHeader_2.54mm
+PinHeader_1x10_P2.54mm_Horizontal
+Through hole angled pin header, 1x10, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x10 2.54mm single row
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_1x10_P2.54mm_Vertical
+Through hole straight pin header, 1x10, 2.54mm pitch, single row
+Through hole pin header THT 1x10 2.54mm single row
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x10, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x10 2.54mm single row style1 pin1 left
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x10, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x10 2.54mm single row style2 pin1 right
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_1x11_P2.54mm_Horizontal
+Through hole angled pin header, 1x11, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x11 2.54mm single row
+0
+11
+11
+Connector_PinHeader_2.54mm
+PinHeader_1x11_P2.54mm_Vertical
+Through hole straight pin header, 1x11, 2.54mm pitch, single row
+Through hole pin header THT 1x11 2.54mm single row
+0
+11
+11
+Connector_PinHeader_2.54mm
+PinHeader_1x11_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x11, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x11 2.54mm single row style1 pin1 left
+0
+11
+11
+Connector_PinHeader_2.54mm
+PinHeader_1x11_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x11, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x11 2.54mm single row style2 pin1 right
+0
+11
+11
+Connector_PinHeader_2.54mm
+PinHeader_1x12_P2.54mm_Horizontal
+Through hole angled pin header, 1x12, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x12 2.54mm single row
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_1x12_P2.54mm_Vertical
+Through hole straight pin header, 1x12, 2.54mm pitch, single row
+Through hole pin header THT 1x12 2.54mm single row
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_1x12_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x12, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x12 2.54mm single row style1 pin1 left
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_1x12_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x12, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x12 2.54mm single row style2 pin1 right
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_1x13_P2.54mm_Horizontal
+Through hole angled pin header, 1x13, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x13 2.54mm single row
+0
+13
+13
+Connector_PinHeader_2.54mm
+PinHeader_1x13_P2.54mm_Vertical
+Through hole straight pin header, 1x13, 2.54mm pitch, single row
+Through hole pin header THT 1x13 2.54mm single row
+0
+13
+13
+Connector_PinHeader_2.54mm
+PinHeader_1x13_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x13, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x13 2.54mm single row style1 pin1 left
+0
+13
+13
+Connector_PinHeader_2.54mm
+PinHeader_1x13_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x13, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x13 2.54mm single row style2 pin1 right
+0
+13
+13
+Connector_PinHeader_2.54mm
+PinHeader_1x14_P2.54mm_Horizontal
+Through hole angled pin header, 1x14, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x14 2.54mm single row
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_1x14_P2.54mm_Vertical
+Through hole straight pin header, 1x14, 2.54mm pitch, single row
+Through hole pin header THT 1x14 2.54mm single row
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_1x14_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x14, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x14 2.54mm single row style1 pin1 left
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_1x14_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x14, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x14 2.54mm single row style2 pin1 right
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_1x15_P2.54mm_Horizontal
+Through hole angled pin header, 1x15, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x15 2.54mm single row
+0
+15
+15
+Connector_PinHeader_2.54mm
+PinHeader_1x15_P2.54mm_Vertical
+Through hole straight pin header, 1x15, 2.54mm pitch, single row
+Through hole pin header THT 1x15 2.54mm single row
+0
+15
+15
+Connector_PinHeader_2.54mm
+PinHeader_1x15_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x15, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x15 2.54mm single row style1 pin1 left
+0
+15
+15
+Connector_PinHeader_2.54mm
+PinHeader_1x15_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x15, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x15 2.54mm single row style2 pin1 right
+0
+15
+15
+Connector_PinHeader_2.54mm
+PinHeader_1x16_P2.54mm_Horizontal
+Through hole angled pin header, 1x16, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x16 2.54mm single row
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_1x16_P2.54mm_Vertical
+Through hole straight pin header, 1x16, 2.54mm pitch, single row
+Through hole pin header THT 1x16 2.54mm single row
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_1x16_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x16, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x16 2.54mm single row style1 pin1 left
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_1x16_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x16, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x16 2.54mm single row style2 pin1 right
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_1x17_P2.54mm_Horizontal
+Through hole angled pin header, 1x17, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x17 2.54mm single row
+0
+17
+17
+Connector_PinHeader_2.54mm
+PinHeader_1x17_P2.54mm_Vertical
+Through hole straight pin header, 1x17, 2.54mm pitch, single row
+Through hole pin header THT 1x17 2.54mm single row
+0
+17
+17
+Connector_PinHeader_2.54mm
+PinHeader_1x17_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x17, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x17 2.54mm single row style1 pin1 left
+0
+17
+17
+Connector_PinHeader_2.54mm
+PinHeader_1x17_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x17, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x17 2.54mm single row style2 pin1 right
+0
+17
+17
+Connector_PinHeader_2.54mm
+PinHeader_1x18_P2.54mm_Horizontal
+Through hole angled pin header, 1x18, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x18 2.54mm single row
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_1x18_P2.54mm_Vertical
+Through hole straight pin header, 1x18, 2.54mm pitch, single row
+Through hole pin header THT 1x18 2.54mm single row
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x18, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x18 2.54mm single row style1 pin1 left
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x18, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x18 2.54mm single row style2 pin1 right
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_1x19_P2.54mm_Horizontal
+Through hole angled pin header, 1x19, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x19 2.54mm single row
+0
+19
+19
+Connector_PinHeader_2.54mm
+PinHeader_1x19_P2.54mm_Vertical
+Through hole straight pin header, 1x19, 2.54mm pitch, single row
+Through hole pin header THT 1x19 2.54mm single row
+0
+19
+19
+Connector_PinHeader_2.54mm
+PinHeader_1x19_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x19, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x19 2.54mm single row style1 pin1 left
+0
+19
+19
+Connector_PinHeader_2.54mm
+PinHeader_1x19_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x19, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x19 2.54mm single row style2 pin1 right
+0
+19
+19
+Connector_PinHeader_2.54mm
+PinHeader_1x20_P2.54mm_Horizontal
+Through hole angled pin header, 1x20, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x20 2.54mm single row
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_1x20_P2.54mm_Vertical
+Through hole straight pin header, 1x20, 2.54mm pitch, single row
+Through hole pin header THT 1x20 2.54mm single row
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_1x20_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x20, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x20 2.54mm single row style1 pin1 left
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_1x20_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x20, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x20 2.54mm single row style2 pin1 right
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_1x21_P2.54mm_Horizontal
+Through hole angled pin header, 1x21, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x21 2.54mm single row
+0
+21
+21
+Connector_PinHeader_2.54mm
+PinHeader_1x21_P2.54mm_Vertical
+Through hole straight pin header, 1x21, 2.54mm pitch, single row
+Through hole pin header THT 1x21 2.54mm single row
+0
+21
+21
+Connector_PinHeader_2.54mm
+PinHeader_1x21_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x21, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x21 2.54mm single row style1 pin1 left
+0
+21
+21
+Connector_PinHeader_2.54mm
+PinHeader_1x21_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x21, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x21 2.54mm single row style2 pin1 right
+0
+21
+21
+Connector_PinHeader_2.54mm
+PinHeader_1x22_P2.54mm_Horizontal
+Through hole angled pin header, 1x22, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x22 2.54mm single row
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_1x22_P2.54mm_Vertical
+Through hole straight pin header, 1x22, 2.54mm pitch, single row
+Through hole pin header THT 1x22 2.54mm single row
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_1x22_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x22, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x22 2.54mm single row style1 pin1 left
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_1x22_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x22, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x22 2.54mm single row style2 pin1 right
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_1x23_P2.54mm_Horizontal
+Through hole angled pin header, 1x23, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x23 2.54mm single row
+0
+23
+23
+Connector_PinHeader_2.54mm
+PinHeader_1x23_P2.54mm_Vertical
+Through hole straight pin header, 1x23, 2.54mm pitch, single row
+Through hole pin header THT 1x23 2.54mm single row
+0
+23
+23
+Connector_PinHeader_2.54mm
+PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x23, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x23 2.54mm single row style1 pin1 left
+0
+23
+23
+Connector_PinHeader_2.54mm
+PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x23, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x23 2.54mm single row style2 pin1 right
+0
+23
+23
+Connector_PinHeader_2.54mm
+PinHeader_1x24_P2.54mm_Horizontal
+Through hole angled pin header, 1x24, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x24 2.54mm single row
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_1x24_P2.54mm_Vertical
+Through hole straight pin header, 1x24, 2.54mm pitch, single row
+Through hole pin header THT 1x24 2.54mm single row
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_1x24_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x24, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x24 2.54mm single row style1 pin1 left
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_1x24_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x24, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x24 2.54mm single row style2 pin1 right
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_1x25_P2.54mm_Horizontal
+Through hole angled pin header, 1x25, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x25 2.54mm single row
+0
+25
+25
+Connector_PinHeader_2.54mm
+PinHeader_1x25_P2.54mm_Vertical
+Through hole straight pin header, 1x25, 2.54mm pitch, single row
+Through hole pin header THT 1x25 2.54mm single row
+0
+25
+25
+Connector_PinHeader_2.54mm
+PinHeader_1x25_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x25, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x25 2.54mm single row style1 pin1 left
+0
+25
+25
+Connector_PinHeader_2.54mm
+PinHeader_1x25_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x25, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x25 2.54mm single row style2 pin1 right
+0
+25
+25
+Connector_PinHeader_2.54mm
+PinHeader_1x26_P2.54mm_Horizontal
+Through hole angled pin header, 1x26, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x26 2.54mm single row
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_1x26_P2.54mm_Vertical
+Through hole straight pin header, 1x26, 2.54mm pitch, single row
+Through hole pin header THT 1x26 2.54mm single row
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_1x26_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x26, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x26 2.54mm single row style1 pin1 left
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_1x26_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x26, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x26 2.54mm single row style2 pin1 right
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_1x27_P2.54mm_Horizontal
+Through hole angled pin header, 1x27, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x27 2.54mm single row
+0
+27
+27
+Connector_PinHeader_2.54mm
+PinHeader_1x27_P2.54mm_Vertical
+Through hole straight pin header, 1x27, 2.54mm pitch, single row
+Through hole pin header THT 1x27 2.54mm single row
+0
+27
+27
+Connector_PinHeader_2.54mm
+PinHeader_1x27_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x27, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x27 2.54mm single row style1 pin1 left
+0
+27
+27
+Connector_PinHeader_2.54mm
+PinHeader_1x27_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x27, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x27 2.54mm single row style2 pin1 right
+0
+27
+27
+Connector_PinHeader_2.54mm
+PinHeader_1x28_P2.54mm_Horizontal
+Through hole angled pin header, 1x28, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x28 2.54mm single row
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_1x28_P2.54mm_Vertical
+Through hole straight pin header, 1x28, 2.54mm pitch, single row
+Through hole pin header THT 1x28 2.54mm single row
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_1x28_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x28, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x28 2.54mm single row style1 pin1 left
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_1x28_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x28, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x28 2.54mm single row style2 pin1 right
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_1x29_P2.54mm_Horizontal
+Through hole angled pin header, 1x29, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x29 2.54mm single row
+0
+29
+29
+Connector_PinHeader_2.54mm
+PinHeader_1x29_P2.54mm_Vertical
+Through hole straight pin header, 1x29, 2.54mm pitch, single row
+Through hole pin header THT 1x29 2.54mm single row
+0
+29
+29
+Connector_PinHeader_2.54mm
+PinHeader_1x29_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x29, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x29 2.54mm single row style1 pin1 left
+0
+29
+29
+Connector_PinHeader_2.54mm
+PinHeader_1x29_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x29, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x29 2.54mm single row style2 pin1 right
+0
+29
+29
+Connector_PinHeader_2.54mm
+PinHeader_1x30_P2.54mm_Horizontal
+Through hole angled pin header, 1x30, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x30 2.54mm single row
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_1x30_P2.54mm_Vertical
+Through hole straight pin header, 1x30, 2.54mm pitch, single row
+Through hole pin header THT 1x30 2.54mm single row
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_1x30_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x30, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x30 2.54mm single row style1 pin1 left
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_1x30_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x30, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x30 2.54mm single row style2 pin1 right
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_1x31_P2.54mm_Horizontal
+Through hole angled pin header, 1x31, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x31 2.54mm single row
+0
+31
+31
+Connector_PinHeader_2.54mm
+PinHeader_1x31_P2.54mm_Vertical
+Through hole straight pin header, 1x31, 2.54mm pitch, single row
+Through hole pin header THT 1x31 2.54mm single row
+0
+31
+31
+Connector_PinHeader_2.54mm
+PinHeader_1x31_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x31, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x31 2.54mm single row style1 pin1 left
+0
+31
+31
+Connector_PinHeader_2.54mm
+PinHeader_1x31_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x31, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x31 2.54mm single row style2 pin1 right
+0
+31
+31
+Connector_PinHeader_2.54mm
+PinHeader_1x32_P2.54mm_Horizontal
+Through hole angled pin header, 1x32, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x32 2.54mm single row
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_1x32_P2.54mm_Vertical
+Through hole straight pin header, 1x32, 2.54mm pitch, single row
+Through hole pin header THT 1x32 2.54mm single row
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_1x32_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x32, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x32 2.54mm single row style1 pin1 left
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_1x32_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x32, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x32 2.54mm single row style2 pin1 right
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_1x33_P2.54mm_Horizontal
+Through hole angled pin header, 1x33, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x33 2.54mm single row
+0
+33
+33
+Connector_PinHeader_2.54mm
+PinHeader_1x33_P2.54mm_Vertical
+Through hole straight pin header, 1x33, 2.54mm pitch, single row
+Through hole pin header THT 1x33 2.54mm single row
+0
+33
+33
+Connector_PinHeader_2.54mm
+PinHeader_1x33_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x33, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x33 2.54mm single row style1 pin1 left
+0
+33
+33
+Connector_PinHeader_2.54mm
+PinHeader_1x33_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x33, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x33 2.54mm single row style2 pin1 right
+0
+33
+33
+Connector_PinHeader_2.54mm
+PinHeader_1x34_P2.54mm_Horizontal
+Through hole angled pin header, 1x34, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x34 2.54mm single row
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_1x34_P2.54mm_Vertical
+Through hole straight pin header, 1x34, 2.54mm pitch, single row
+Through hole pin header THT 1x34 2.54mm single row
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_1x34_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x34, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x34 2.54mm single row style1 pin1 left
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_1x34_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x34, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x34 2.54mm single row style2 pin1 right
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_1x35_P2.54mm_Horizontal
+Through hole angled pin header, 1x35, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x35 2.54mm single row
+0
+35
+35
+Connector_PinHeader_2.54mm
+PinHeader_1x35_P2.54mm_Vertical
+Through hole straight pin header, 1x35, 2.54mm pitch, single row
+Through hole pin header THT 1x35 2.54mm single row
+0
+35
+35
+Connector_PinHeader_2.54mm
+PinHeader_1x35_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x35, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x35 2.54mm single row style1 pin1 left
+0
+35
+35
+Connector_PinHeader_2.54mm
+PinHeader_1x35_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x35, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x35 2.54mm single row style2 pin1 right
+0
+35
+35
+Connector_PinHeader_2.54mm
+PinHeader_1x36_P2.54mm_Horizontal
+Through hole angled pin header, 1x36, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x36 2.54mm single row
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_1x36_P2.54mm_Vertical
+Through hole straight pin header, 1x36, 2.54mm pitch, single row
+Through hole pin header THT 1x36 2.54mm single row
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_1x36_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x36, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x36 2.54mm single row style1 pin1 left
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_1x36_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x36, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x36 2.54mm single row style2 pin1 right
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_1x37_P2.54mm_Horizontal
+Through hole angled pin header, 1x37, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x37 2.54mm single row
+0
+37
+37
+Connector_PinHeader_2.54mm
+PinHeader_1x37_P2.54mm_Vertical
+Through hole straight pin header, 1x37, 2.54mm pitch, single row
+Through hole pin header THT 1x37 2.54mm single row
+0
+37
+37
+Connector_PinHeader_2.54mm
+PinHeader_1x37_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x37, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x37 2.54mm single row style1 pin1 left
+0
+37
+37
+Connector_PinHeader_2.54mm
+PinHeader_1x37_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x37, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x37 2.54mm single row style2 pin1 right
+0
+37
+37
+Connector_PinHeader_2.54mm
+PinHeader_1x38_P2.54mm_Horizontal
+Through hole angled pin header, 1x38, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x38 2.54mm single row
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_1x38_P2.54mm_Vertical
+Through hole straight pin header, 1x38, 2.54mm pitch, single row
+Through hole pin header THT 1x38 2.54mm single row
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_1x38_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x38, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x38 2.54mm single row style1 pin1 left
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_1x38_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x38, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x38 2.54mm single row style2 pin1 right
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_1x39_P2.54mm_Horizontal
+Through hole angled pin header, 1x39, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x39 2.54mm single row
+0
+39
+39
+Connector_PinHeader_2.54mm
+PinHeader_1x39_P2.54mm_Vertical
+Through hole straight pin header, 1x39, 2.54mm pitch, single row
+Through hole pin header THT 1x39 2.54mm single row
+0
+39
+39
+Connector_PinHeader_2.54mm
+PinHeader_1x39_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x39, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x39 2.54mm single row style1 pin1 left
+0
+39
+39
+Connector_PinHeader_2.54mm
+PinHeader_1x39_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x39, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x39 2.54mm single row style2 pin1 right
+0
+39
+39
+Connector_PinHeader_2.54mm
+PinHeader_1x40_P2.54mm_Horizontal
+Through hole angled pin header, 1x40, 2.54mm pitch, 6mm pin length, single row
+Through hole angled pin header THT 1x40 2.54mm single row
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_1x40_P2.54mm_Vertical
+Through hole straight pin header, 1x40, 2.54mm pitch, single row
+Through hole pin header THT 1x40 2.54mm single row
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_1x40_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight pin header, 1x40, 2.54mm pitch, single row, style 1 (pin 1 left)
+Surface mounted pin header SMD 1x40 2.54mm single row style1 pin1 left
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_1x40_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight pin header, 1x40, 2.54mm pitch, single row, style 2 (pin 1 right)
+Surface mounted pin header SMD 1x40 2.54mm single row style2 pin1 right
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_2x01_P2.54mm_Horizontal
+Through hole angled pin header, 2x01, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x01 2.54mm double row
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_2x01_P2.54mm_Vertical
+Through hole straight pin header, 2x01, 2.54mm pitch, double rows
+Through hole pin header THT 2x01 2.54mm double row
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_2x01_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x01, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x01 2.54mm double row
+0
+2
+2
+Connector_PinHeader_2.54mm
+PinHeader_2x02_P2.54mm_Horizontal
+Through hole angled pin header, 2x02, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x02 2.54mm double row
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_2x02_P2.54mm_Vertical
+Through hole straight pin header, 2x02, 2.54mm pitch, double rows
+Through hole pin header THT 2x02 2.54mm double row
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_2x02_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x02, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x02 2.54mm double row
+0
+4
+4
+Connector_PinHeader_2.54mm
+PinHeader_2x03_P2.54mm_Horizontal
+Through hole angled pin header, 2x03, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x03 2.54mm double row
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_2x03_P2.54mm_Vertical
+Through hole straight pin header, 2x03, 2.54mm pitch, double rows
+Through hole pin header THT 2x03 2.54mm double row
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_2x03_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x03, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x03 2.54mm double row
+0
+6
+6
+Connector_PinHeader_2.54mm
+PinHeader_2x04_P2.54mm_Horizontal
+Through hole angled pin header, 2x04, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x04 2.54mm double row
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_2x04_P2.54mm_Vertical
+Through hole straight pin header, 2x04, 2.54mm pitch, double rows
+Through hole pin header THT 2x04 2.54mm double row
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_2x04_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x04, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x04 2.54mm double row
+0
+8
+8
+Connector_PinHeader_2.54mm
+PinHeader_2x05_P2.54mm_Horizontal
+Through hole angled pin header, 2x05, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_2x05_P2.54mm_Vertical
+Through hole straight pin header, 2x05, 2.54mm pitch, double rows
+Through hole pin header THT 2x05 2.54mm double row
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_2x05_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x05, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x05 2.54mm double row
+0
+10
+10
+Connector_PinHeader_2.54mm
+PinHeader_2x06_P2.54mm_Horizontal
+Through hole angled pin header, 2x06, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_2x06_P2.54mm_Vertical
+Through hole straight pin header, 2x06, 2.54mm pitch, double rows
+Through hole pin header THT 2x06 2.54mm double row
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_2x06_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x06, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x06 2.54mm double row
+0
+12
+12
+Connector_PinHeader_2.54mm
+PinHeader_2x07_P2.54mm_Horizontal
+Through hole angled pin header, 2x07, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_2x07_P2.54mm_Vertical
+Through hole straight pin header, 2x07, 2.54mm pitch, double rows
+Through hole pin header THT 2x07 2.54mm double row
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_2x07_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x07, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x07 2.54mm double row
+0
+14
+14
+Connector_PinHeader_2.54mm
+PinHeader_2x08_P2.54mm_Horizontal
+Through hole angled pin header, 2x08, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_2x08_P2.54mm_Vertical
+Through hole straight pin header, 2x08, 2.54mm pitch, double rows
+Through hole pin header THT 2x08 2.54mm double row
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_2x08_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x08, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x08 2.54mm double row
+0
+16
+16
+Connector_PinHeader_2.54mm
+PinHeader_2x09_P2.54mm_Horizontal
+Through hole angled pin header, 2x09, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x09 2.54mm double row
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_2x09_P2.54mm_Vertical
+Through hole straight pin header, 2x09, 2.54mm pitch, double rows
+Through hole pin header THT 2x09 2.54mm double row
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_2x09_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x09, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x09 2.54mm double row
+0
+18
+18
+Connector_PinHeader_2.54mm
+PinHeader_2x10_P2.54mm_Horizontal
+Through hole angled pin header, 2x10, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_2x10_P2.54mm_Vertical
+Through hole straight pin header, 2x10, 2.54mm pitch, double rows
+Through hole pin header THT 2x10 2.54mm double row
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_2x10_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x10, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x10 2.54mm double row
+0
+20
+20
+Connector_PinHeader_2.54mm
+PinHeader_2x11_P2.54mm_Horizontal
+Through hole angled pin header, 2x11, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x11 2.54mm double row
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_2x11_P2.54mm_Vertical
+Through hole straight pin header, 2x11, 2.54mm pitch, double rows
+Through hole pin header THT 2x11 2.54mm double row
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_2x11_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x11, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x11 2.54mm double row
+0
+22
+22
+Connector_PinHeader_2.54mm
+PinHeader_2x12_P2.54mm_Horizontal
+Through hole angled pin header, 2x12, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_2x12_P2.54mm_Vertical
+Through hole straight pin header, 2x12, 2.54mm pitch, double rows
+Through hole pin header THT 2x12 2.54mm double row
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_2x12_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x12, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x12 2.54mm double row
+0
+24
+24
+Connector_PinHeader_2.54mm
+PinHeader_2x13_P2.54mm_Horizontal
+Through hole angled pin header, 2x13, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_2x13_P2.54mm_Vertical
+Through hole straight pin header, 2x13, 2.54mm pitch, double rows
+Through hole pin header THT 2x13 2.54mm double row
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_2x13_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x13, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x13 2.54mm double row
+0
+26
+26
+Connector_PinHeader_2.54mm
+PinHeader_2x14_P2.54mm_Horizontal
+Through hole angled pin header, 2x14, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x14 2.54mm double row
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_2x14_P2.54mm_Vertical
+Through hole straight pin header, 2x14, 2.54mm pitch, double rows
+Through hole pin header THT 2x14 2.54mm double row
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_2x14_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x14, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x14 2.54mm double row
+0
+28
+28
+Connector_PinHeader_2.54mm
+PinHeader_2x15_P2.54mm_Horizontal
+Through hole angled pin header, 2x15, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_2x15_P2.54mm_Vertical
+Through hole straight pin header, 2x15, 2.54mm pitch, double rows
+Through hole pin header THT 2x15 2.54mm double row
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_2x15_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x15, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x15 2.54mm double row
+0
+30
+30
+Connector_PinHeader_2.54mm
+PinHeader_2x16_P2.54mm_Horizontal
+Through hole angled pin header, 2x16, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x16 2.54mm double row
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_2x16_P2.54mm_Vertical
+Through hole straight pin header, 2x16, 2.54mm pitch, double rows
+Through hole pin header THT 2x16 2.54mm double row
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_2x16_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x16, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x16 2.54mm double row
+0
+32
+32
+Connector_PinHeader_2.54mm
+PinHeader_2x17_P2.54mm_Horizontal
+Through hole angled pin header, 2x17, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_2x17_P2.54mm_Vertical
+Through hole straight pin header, 2x17, 2.54mm pitch, double rows
+Through hole pin header THT 2x17 2.54mm double row
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_2x17_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x17, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x17 2.54mm double row
+0
+34
+34
+Connector_PinHeader_2.54mm
+PinHeader_2x18_P2.54mm_Horizontal
+Through hole angled pin header, 2x18, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x18 2.54mm double row
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_2x18_P2.54mm_Vertical
+Through hole straight pin header, 2x18, 2.54mm pitch, double rows
+Through hole pin header THT 2x18 2.54mm double row
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_2x18_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x18, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x18 2.54mm double row
+0
+36
+36
+Connector_PinHeader_2.54mm
+PinHeader_2x19_P2.54mm_Horizontal
+Through hole angled pin header, 2x19, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x19 2.54mm double row
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_2x19_P2.54mm_Vertical
+Through hole straight pin header, 2x19, 2.54mm pitch, double rows
+Through hole pin header THT 2x19 2.54mm double row
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_2x19_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x19, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x19 2.54mm double row
+0
+38
+38
+Connector_PinHeader_2.54mm
+PinHeader_2x20_P2.54mm_Horizontal
+Through hole angled pin header, 2x20, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_2x20_P2.54mm_Vertical
+Through hole straight pin header, 2x20, 2.54mm pitch, double rows
+Through hole pin header THT 2x20 2.54mm double row
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_2x20_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x20, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x20 2.54mm double row
+0
+40
+40
+Connector_PinHeader_2.54mm
+PinHeader_2x21_P2.54mm_Horizontal
+Through hole angled pin header, 2x21, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x21 2.54mm double row
+0
+42
+42
+Connector_PinHeader_2.54mm
+PinHeader_2x21_P2.54mm_Vertical
+Through hole straight pin header, 2x21, 2.54mm pitch, double rows
+Through hole pin header THT 2x21 2.54mm double row
+0
+42
+42
+Connector_PinHeader_2.54mm
+PinHeader_2x21_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x21, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x21 2.54mm double row
+0
+42
+42
+Connector_PinHeader_2.54mm
+PinHeader_2x22_P2.54mm_Horizontal
+Through hole angled pin header, 2x22, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x22 2.54mm double row
+0
+44
+44
+Connector_PinHeader_2.54mm
+PinHeader_2x22_P2.54mm_Vertical
+Through hole straight pin header, 2x22, 2.54mm pitch, double rows
+Through hole pin header THT 2x22 2.54mm double row
+0
+44
+44
+Connector_PinHeader_2.54mm
+PinHeader_2x22_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x22, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x22 2.54mm double row
+0
+44
+44
+Connector_PinHeader_2.54mm
+PinHeader_2x23_P2.54mm_Horizontal
+Through hole angled pin header, 2x23, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x23 2.54mm double row
+0
+46
+46
+Connector_PinHeader_2.54mm
+PinHeader_2x23_P2.54mm_Vertical
+Through hole straight pin header, 2x23, 2.54mm pitch, double rows
+Through hole pin header THT 2x23 2.54mm double row
+0
+46
+46
+Connector_PinHeader_2.54mm
+PinHeader_2x23_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x23, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x23 2.54mm double row
+0
+46
+46
+Connector_PinHeader_2.54mm
+PinHeader_2x24_P2.54mm_Horizontal
+Through hole angled pin header, 2x24, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x24 2.54mm double row
+0
+48
+48
+Connector_PinHeader_2.54mm
+PinHeader_2x24_P2.54mm_Vertical
+Through hole straight pin header, 2x24, 2.54mm pitch, double rows
+Through hole pin header THT 2x24 2.54mm double row
+0
+48
+48
+Connector_PinHeader_2.54mm
+PinHeader_2x24_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x24, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x24 2.54mm double row
+0
+48
+48
+Connector_PinHeader_2.54mm
+PinHeader_2x25_P2.54mm_Horizontal
+Through hole angled pin header, 2x25, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_PinHeader_2.54mm
+PinHeader_2x25_P2.54mm_Vertical
+Through hole straight pin header, 2x25, 2.54mm pitch, double rows
+Through hole pin header THT 2x25 2.54mm double row
+0
+50
+50
+Connector_PinHeader_2.54mm
+PinHeader_2x25_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x25, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x25 2.54mm double row
+0
+50
+50
+Connector_PinHeader_2.54mm
+PinHeader_2x26_P2.54mm_Horizontal
+Through hole angled pin header, 2x26, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x26 2.54mm double row
+0
+52
+52
+Connector_PinHeader_2.54mm
+PinHeader_2x26_P2.54mm_Vertical
+Through hole straight pin header, 2x26, 2.54mm pitch, double rows
+Through hole pin header THT 2x26 2.54mm double row
+0
+52
+52
+Connector_PinHeader_2.54mm
+PinHeader_2x26_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x26, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x26 2.54mm double row
+0
+52
+52
+Connector_PinHeader_2.54mm
+PinHeader_2x27_P2.54mm_Horizontal
+Through hole angled pin header, 2x27, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x27 2.54mm double row
+0
+54
+54
+Connector_PinHeader_2.54mm
+PinHeader_2x27_P2.54mm_Vertical
+Through hole straight pin header, 2x27, 2.54mm pitch, double rows
+Through hole pin header THT 2x27 2.54mm double row
+0
+54
+54
+Connector_PinHeader_2.54mm
+PinHeader_2x27_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x27, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x27 2.54mm double row
+0
+54
+54
+Connector_PinHeader_2.54mm
+PinHeader_2x28_P2.54mm_Horizontal
+Through hole angled pin header, 2x28, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x28 2.54mm double row
+0
+56
+56
+Connector_PinHeader_2.54mm
+PinHeader_2x28_P2.54mm_Vertical
+Through hole straight pin header, 2x28, 2.54mm pitch, double rows
+Through hole pin header THT 2x28 2.54mm double row
+0
+56
+56
+Connector_PinHeader_2.54mm
+PinHeader_2x28_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x28, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x28 2.54mm double row
+0
+56
+56
+Connector_PinHeader_2.54mm
+PinHeader_2x29_P2.54mm_Horizontal
+Through hole angled pin header, 2x29, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x29 2.54mm double row
+0
+58
+58
+Connector_PinHeader_2.54mm
+PinHeader_2x29_P2.54mm_Vertical
+Through hole straight pin header, 2x29, 2.54mm pitch, double rows
+Through hole pin header THT 2x29 2.54mm double row
+0
+58
+58
+Connector_PinHeader_2.54mm
+PinHeader_2x29_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x29, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x29 2.54mm double row
+0
+58
+58
+Connector_PinHeader_2.54mm
+PinHeader_2x30_P2.54mm_Horizontal
+Through hole angled pin header, 2x30, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_PinHeader_2.54mm
+PinHeader_2x30_P2.54mm_Vertical
+Through hole straight pin header, 2x30, 2.54mm pitch, double rows
+Through hole pin header THT 2x30 2.54mm double row
+0
+60
+60
+Connector_PinHeader_2.54mm
+PinHeader_2x30_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x30, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x30 2.54mm double row
+0
+60
+60
+Connector_PinHeader_2.54mm
+PinHeader_2x31_P2.54mm_Horizontal
+Through hole angled pin header, 2x31, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x31 2.54mm double row
+0
+62
+62
+Connector_PinHeader_2.54mm
+PinHeader_2x31_P2.54mm_Vertical
+Through hole straight pin header, 2x31, 2.54mm pitch, double rows
+Through hole pin header THT 2x31 2.54mm double row
+0
+62
+62
+Connector_PinHeader_2.54mm
+PinHeader_2x31_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x31, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x31 2.54mm double row
+0
+62
+62
+Connector_PinHeader_2.54mm
+PinHeader_2x32_P2.54mm_Horizontal
+Through hole angled pin header, 2x32, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_PinHeader_2.54mm
+PinHeader_2x32_P2.54mm_Vertical
+Through hole straight pin header, 2x32, 2.54mm pitch, double rows
+Through hole pin header THT 2x32 2.54mm double row
+0
+64
+64
+Connector_PinHeader_2.54mm
+PinHeader_2x32_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x32, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x32 2.54mm double row
+0
+64
+64
+Connector_PinHeader_2.54mm
+PinHeader_2x33_P2.54mm_Horizontal
+Through hole angled pin header, 2x33, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x33 2.54mm double row
+0
+66
+66
+Connector_PinHeader_2.54mm
+PinHeader_2x33_P2.54mm_Vertical
+Through hole straight pin header, 2x33, 2.54mm pitch, double rows
+Through hole pin header THT 2x33 2.54mm double row
+0
+66
+66
+Connector_PinHeader_2.54mm
+PinHeader_2x33_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x33, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x33 2.54mm double row
+0
+66
+66
+Connector_PinHeader_2.54mm
+PinHeader_2x34_P2.54mm_Horizontal
+Through hole angled pin header, 2x34, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x34 2.54mm double row
+0
+68
+68
+Connector_PinHeader_2.54mm
+PinHeader_2x34_P2.54mm_Vertical
+Through hole straight pin header, 2x34, 2.54mm pitch, double rows
+Through hole pin header THT 2x34 2.54mm double row
+0
+68
+68
+Connector_PinHeader_2.54mm
+PinHeader_2x34_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x34, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x34 2.54mm double row
+0
+68
+68
+Connector_PinHeader_2.54mm
+PinHeader_2x35_P2.54mm_Horizontal
+Through hole angled pin header, 2x35, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x35 2.54mm double row
+0
+70
+70
+Connector_PinHeader_2.54mm
+PinHeader_2x35_P2.54mm_Vertical
+Through hole straight pin header, 2x35, 2.54mm pitch, double rows
+Through hole pin header THT 2x35 2.54mm double row
+0
+70
+70
+Connector_PinHeader_2.54mm
+PinHeader_2x35_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x35, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x35 2.54mm double row
+0
+70
+70
+Connector_PinHeader_2.54mm
+PinHeader_2x36_P2.54mm_Horizontal
+Through hole angled pin header, 2x36, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x36 2.54mm double row
+0
+72
+72
+Connector_PinHeader_2.54mm
+PinHeader_2x36_P2.54mm_Vertical
+Through hole straight pin header, 2x36, 2.54mm pitch, double rows
+Through hole pin header THT 2x36 2.54mm double row
+0
+72
+72
+Connector_PinHeader_2.54mm
+PinHeader_2x36_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x36, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x36 2.54mm double row
+0
+72
+72
+Connector_PinHeader_2.54mm
+PinHeader_2x37_P2.54mm_Horizontal
+Through hole angled pin header, 2x37, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x37 2.54mm double row
+0
+74
+74
+Connector_PinHeader_2.54mm
+PinHeader_2x37_P2.54mm_Vertical
+Through hole straight pin header, 2x37, 2.54mm pitch, double rows
+Through hole pin header THT 2x37 2.54mm double row
+0
+74
+74
+Connector_PinHeader_2.54mm
+PinHeader_2x37_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x37, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x37 2.54mm double row
+0
+74
+74
+Connector_PinHeader_2.54mm
+PinHeader_2x38_P2.54mm_Horizontal
+Through hole angled pin header, 2x38, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x38 2.54mm double row
+0
+76
+76
+Connector_PinHeader_2.54mm
+PinHeader_2x38_P2.54mm_Vertical
+Through hole straight pin header, 2x38, 2.54mm pitch, double rows
+Through hole pin header THT 2x38 2.54mm double row
+0
+76
+76
+Connector_PinHeader_2.54mm
+PinHeader_2x38_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x38, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x38 2.54mm double row
+0
+76
+76
+Connector_PinHeader_2.54mm
+PinHeader_2x39_P2.54mm_Horizontal
+Through hole angled pin header, 2x39, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x39 2.54mm double row
+0
+78
+78
+Connector_PinHeader_2.54mm
+PinHeader_2x39_P2.54mm_Vertical
+Through hole straight pin header, 2x39, 2.54mm pitch, double rows
+Through hole pin header THT 2x39 2.54mm double row
+0
+78
+78
+Connector_PinHeader_2.54mm
+PinHeader_2x39_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x39, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x39 2.54mm double row
+0
+78
+78
+Connector_PinHeader_2.54mm
+PinHeader_2x40_P2.54mm_Horizontal
+Through hole angled pin header, 2x40, 2.54mm pitch, 6mm pin length, double rows
+Through hole angled pin header THT 2x40 2.54mm double row
+0
+80
+80
+Connector_PinHeader_2.54mm
+PinHeader_2x40_P2.54mm_Vertical
+Through hole straight pin header, 2x40, 2.54mm pitch, double rows
+Through hole pin header THT 2x40 2.54mm double row
+0
+80
+80
+Connector_PinHeader_2.54mm
+PinHeader_2x40_P2.54mm_Vertical_SMD
+surface-mounted straight pin header, 2x40, 2.54mm pitch, double rows
+Surface mounted pin header SMD 2x40 2.54mm double row
+0
+80
+80
+Connector_PinSocket_1.00mm
+PinSocket_1x02_P1.00mm_Vertical
+Through hole straight socket strip, 1x02, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x02 1.00mm single row
+0
+2
+2
+Connector_PinSocket_1.00mm
+PinSocket_1x02_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x02, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x02 1.00mm single row style1 pin1 left
+0
+2
+2
+Connector_PinSocket_1.00mm
+PinSocket_1x02_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x02, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x02 1.00mm single row style2 pin1 right
+0
+2
+2
+Connector_PinSocket_1.00mm
+PinSocket_1x03_P1.00mm_Vertical
+Through hole straight socket strip, 1x03, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x03 1.00mm single row
+0
+3
+3
+Connector_PinSocket_1.00mm
+PinSocket_1x03_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x03, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x03 1.00mm single row style1 pin1 left
+0
+3
+3
+Connector_PinSocket_1.00mm
+PinSocket_1x03_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x03, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x03 1.00mm single row style2 pin1 right
+0
+3
+3
+Connector_PinSocket_1.00mm
+PinSocket_1x04_P1.00mm_Vertical
+Through hole straight socket strip, 1x04, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x04 1.00mm single row
+0
+4
+4
+Connector_PinSocket_1.00mm
+PinSocket_1x04_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x04, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x04 1.00mm single row style1 pin1 left
+0
+4
+4
+Connector_PinSocket_1.00mm
+PinSocket_1x04_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x04, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x04 1.00mm single row style2 pin1 right
+0
+4
+4
+Connector_PinSocket_1.00mm
+PinSocket_1x05_P1.00mm_Vertical
+Through hole straight socket strip, 1x05, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x05 1.00mm single row
+0
+5
+5
+Connector_PinSocket_1.00mm
+PinSocket_1x05_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x05, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x05 1.00mm single row style1 pin1 left
+0
+5
+5
+Connector_PinSocket_1.00mm
+PinSocket_1x05_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x05, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x05 1.00mm single row style2 pin1 right
+0
+5
+5
+Connector_PinSocket_1.00mm
+PinSocket_1x06_P1.00mm_Vertical
+Through hole straight socket strip, 1x06, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x06 1.00mm single row
+0
+6
+6
+Connector_PinSocket_1.00mm
+PinSocket_1x06_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x06, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x06 1.00mm single row style1 pin1 left
+0
+6
+6
+Connector_PinSocket_1.00mm
+PinSocket_1x06_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x06, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x06 1.00mm single row style2 pin1 right
+0
+6
+6
+Connector_PinSocket_1.00mm
+PinSocket_1x07_P1.00mm_Vertical
+Through hole straight socket strip, 1x07, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x07 1.00mm single row
+0
+7
+7
+Connector_PinSocket_1.00mm
+PinSocket_1x07_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x07, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x07 1.00mm single row style1 pin1 left
+0
+7
+7
+Connector_PinSocket_1.00mm
+PinSocket_1x07_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x07, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x07 1.00mm single row style2 pin1 right
+0
+7
+7
+Connector_PinSocket_1.00mm
+PinSocket_1x08_P1.00mm_Vertical
+Through hole straight socket strip, 1x08, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x08 1.00mm single row
+0
+8
+8
+Connector_PinSocket_1.00mm
+PinSocket_1x08_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x08, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x08 1.00mm single row style1 pin1 left
+0
+8
+8
+Connector_PinSocket_1.00mm
+PinSocket_1x08_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x08, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x08 1.00mm single row style2 pin1 right
+0
+8
+8
+Connector_PinSocket_1.00mm
+PinSocket_1x09_P1.00mm_Vertical
+Through hole straight socket strip, 1x09, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x09 1.00mm single row
+0
+9
+9
+Connector_PinSocket_1.00mm
+PinSocket_1x09_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x09, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x09 1.00mm single row style1 pin1 left
+0
+9
+9
+Connector_PinSocket_1.00mm
+PinSocket_1x09_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x09, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x09 1.00mm single row style2 pin1 right
+0
+9
+9
+Connector_PinSocket_1.00mm
+PinSocket_1x10_P1.00mm_Vertical
+Through hole straight socket strip, 1x10, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x10 1.00mm single row
+0
+10
+10
+Connector_PinSocket_1.00mm
+PinSocket_1x10_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x10, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x10 1.00mm single row style1 pin1 left
+0
+10
+10
+Connector_PinSocket_1.00mm
+PinSocket_1x10_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x10, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x10 1.00mm single row style2 pin1 right
+0
+10
+10
+Connector_PinSocket_1.00mm
+PinSocket_1x11_P1.00mm_Vertical
+Through hole straight socket strip, 1x11, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x11 1.00mm single row
+0
+11
+11
+Connector_PinSocket_1.00mm
+PinSocket_1x11_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x11, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x11 1.00mm single row style1 pin1 left
+0
+11
+11
+Connector_PinSocket_1.00mm
+PinSocket_1x11_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x11, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x11 1.00mm single row style2 pin1 right
+0
+11
+11
+Connector_PinSocket_1.00mm
+PinSocket_1x12_P1.00mm_Vertical
+Through hole straight socket strip, 1x12, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x12 1.00mm single row
+0
+12
+12
+Connector_PinSocket_1.00mm
+PinSocket_1x12_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x12, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x12 1.00mm single row style1 pin1 left
+0
+12
+12
+Connector_PinSocket_1.00mm
+PinSocket_1x12_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x12, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x12 1.00mm single row style2 pin1 right
+0
+12
+12
+Connector_PinSocket_1.00mm
+PinSocket_1x13_P1.00mm_Vertical
+Through hole straight socket strip, 1x13, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x13 1.00mm single row
+0
+13
+13
+Connector_PinSocket_1.00mm
+PinSocket_1x13_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x13, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x13 1.00mm single row style1 pin1 left
+0
+13
+13
+Connector_PinSocket_1.00mm
+PinSocket_1x13_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x13, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x13 1.00mm single row style2 pin1 right
+0
+13
+13
+Connector_PinSocket_1.00mm
+PinSocket_1x14_P1.00mm_Vertical
+Through hole straight socket strip, 1x14, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x14 1.00mm single row
+0
+14
+14
+Connector_PinSocket_1.00mm
+PinSocket_1x14_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x14, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x14 1.00mm single row style1 pin1 left
+0
+14
+14
+Connector_PinSocket_1.00mm
+PinSocket_1x14_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x14, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x14 1.00mm single row style2 pin1 right
+0
+14
+14
+Connector_PinSocket_1.00mm
+PinSocket_1x15_P1.00mm_Vertical
+Through hole straight socket strip, 1x15, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x15 1.00mm single row
+0
+15
+15
+Connector_PinSocket_1.00mm
+PinSocket_1x15_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x15, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x15 1.00mm single row style1 pin1 left
+0
+15
+15
+Connector_PinSocket_1.00mm
+PinSocket_1x15_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x15, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x15 1.00mm single row style2 pin1 right
+0
+15
+15
+Connector_PinSocket_1.00mm
+PinSocket_1x16_P1.00mm_Vertical
+Through hole straight socket strip, 1x16, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x16 1.00mm single row
+0
+16
+16
+Connector_PinSocket_1.00mm
+PinSocket_1x16_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x16, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x16 1.00mm single row style1 pin1 left
+0
+16
+16
+Connector_PinSocket_1.00mm
+PinSocket_1x16_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x16, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x16 1.00mm single row style2 pin1 right
+0
+16
+16
+Connector_PinSocket_1.00mm
+PinSocket_1x17_P1.00mm_Vertical
+Through hole straight socket strip, 1x17, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x17 1.00mm single row
+0
+17
+17
+Connector_PinSocket_1.00mm
+PinSocket_1x17_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x17, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x17 1.00mm single row style1 pin1 left
+0
+17
+17
+Connector_PinSocket_1.00mm
+PinSocket_1x17_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x17, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x17 1.00mm single row style2 pin1 right
+0
+17
+17
+Connector_PinSocket_1.00mm
+PinSocket_1x18_P1.00mm_Vertical
+Through hole straight socket strip, 1x18, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x18 1.00mm single row
+0
+18
+18
+Connector_PinSocket_1.00mm
+PinSocket_1x18_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x18, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x18 1.00mm single row style1 pin1 left
+0
+18
+18
+Connector_PinSocket_1.00mm
+PinSocket_1x18_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x18, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x18 1.00mm single row style2 pin1 right
+0
+18
+18
+Connector_PinSocket_1.00mm
+PinSocket_1x19_P1.00mm_Vertical
+Through hole straight socket strip, 1x19, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x19 1.00mm single row
+0
+19
+19
+Connector_PinSocket_1.00mm
+PinSocket_1x19_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x19, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x19 1.00mm single row style1 pin1 left
+0
+19
+19
+Connector_PinSocket_1.00mm
+PinSocket_1x19_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x19, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x19 1.00mm single row style2 pin1 right
+0
+19
+19
+Connector_PinSocket_1.00mm
+PinSocket_1x20_P1.00mm_Vertical
+Through hole straight socket strip, 1x20, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x20 1.00mm single row
+0
+20
+20
+Connector_PinSocket_1.00mm
+PinSocket_1x20_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x20, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x20 1.00mm single row style1 pin1 left
+0
+20
+20
+Connector_PinSocket_1.00mm
+PinSocket_1x20_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x20, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x20 1.00mm single row style2 pin1 right
+0
+20
+20
+Connector_PinSocket_1.00mm
+PinSocket_1x21_P1.00mm_Vertical
+Through hole straight socket strip, 1x21, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x21 1.00mm single row
+0
+21
+21
+Connector_PinSocket_1.00mm
+PinSocket_1x21_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x21, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x21 1.00mm single row style1 pin1 left
+0
+21
+21
+Connector_PinSocket_1.00mm
+PinSocket_1x21_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x21, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x21 1.00mm single row style2 pin1 right
+0
+21
+21
+Connector_PinSocket_1.00mm
+PinSocket_1x22_P1.00mm_Vertical
+Through hole straight socket strip, 1x22, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x22 1.00mm single row
+0
+22
+22
+Connector_PinSocket_1.00mm
+PinSocket_1x22_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x22, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x22 1.00mm single row style1 pin1 left
+0
+22
+22
+Connector_PinSocket_1.00mm
+PinSocket_1x22_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x22, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x22 1.00mm single row style2 pin1 right
+0
+22
+22
+Connector_PinSocket_1.00mm
+PinSocket_1x23_P1.00mm_Vertical
+Through hole straight socket strip, 1x23, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x23 1.00mm single row
+0
+23
+23
+Connector_PinSocket_1.00mm
+PinSocket_1x23_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x23, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x23 1.00mm single row style1 pin1 left
+0
+23
+23
+Connector_PinSocket_1.00mm
+PinSocket_1x23_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x23, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x23 1.00mm single row style2 pin1 right
+0
+23
+23
+Connector_PinSocket_1.00mm
+PinSocket_1x24_P1.00mm_Vertical
+Through hole straight socket strip, 1x24, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x24 1.00mm single row
+0
+24
+24
+Connector_PinSocket_1.00mm
+PinSocket_1x24_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x24, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x24 1.00mm single row style1 pin1 left
+0
+24
+24
+Connector_PinSocket_1.00mm
+PinSocket_1x24_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x24, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x24 1.00mm single row style2 pin1 right
+0
+24
+24
+Connector_PinSocket_1.00mm
+PinSocket_1x25_P1.00mm_Vertical
+Through hole straight socket strip, 1x25, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x25 1.00mm single row
+0
+25
+25
+Connector_PinSocket_1.00mm
+PinSocket_1x25_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x25, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x25 1.00mm single row style1 pin1 left
+0
+25
+25
+Connector_PinSocket_1.00mm
+PinSocket_1x25_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x25, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x25 1.00mm single row style2 pin1 right
+0
+25
+25
+Connector_PinSocket_1.00mm
+PinSocket_1x26_P1.00mm_Vertical
+Through hole straight socket strip, 1x26, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x26 1.00mm single row
+0
+26
+26
+Connector_PinSocket_1.00mm
+PinSocket_1x26_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x26, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x26 1.00mm single row style1 pin1 left
+0
+26
+26
+Connector_PinSocket_1.00mm
+PinSocket_1x26_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x26, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x26 1.00mm single row style2 pin1 right
+0
+26
+26
+Connector_PinSocket_1.00mm
+PinSocket_1x27_P1.00mm_Vertical
+Through hole straight socket strip, 1x27, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x27 1.00mm single row
+0
+27
+27
+Connector_PinSocket_1.00mm
+PinSocket_1x27_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x27, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x27 1.00mm single row style1 pin1 left
+0
+27
+27
+Connector_PinSocket_1.00mm
+PinSocket_1x27_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x27, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x27 1.00mm single row style2 pin1 right
+0
+27
+27
+Connector_PinSocket_1.00mm
+PinSocket_1x28_P1.00mm_Vertical
+Through hole straight socket strip, 1x28, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x28 1.00mm single row
+0
+28
+28
+Connector_PinSocket_1.00mm
+PinSocket_1x28_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x28, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x28 1.00mm single row style1 pin1 left
+0
+28
+28
+Connector_PinSocket_1.00mm
+PinSocket_1x28_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x28, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x28 1.00mm single row style2 pin1 right
+0
+28
+28
+Connector_PinSocket_1.00mm
+PinSocket_1x29_P1.00mm_Vertical
+Through hole straight socket strip, 1x29, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x29 1.00mm single row
+0
+29
+29
+Connector_PinSocket_1.00mm
+PinSocket_1x29_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x29, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x29 1.00mm single row style1 pin1 left
+0
+29
+29
+Connector_PinSocket_1.00mm
+PinSocket_1x29_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x29, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x29 1.00mm single row style2 pin1 right
+0
+29
+29
+Connector_PinSocket_1.00mm
+PinSocket_1x30_P1.00mm_Vertical
+Through hole straight socket strip, 1x30, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x30 1.00mm single row
+0
+30
+30
+Connector_PinSocket_1.00mm
+PinSocket_1x30_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x30, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x30 1.00mm single row style1 pin1 left
+0
+30
+30
+Connector_PinSocket_1.00mm
+PinSocket_1x30_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x30, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x30 1.00mm single row style2 pin1 right
+0
+30
+30
+Connector_PinSocket_1.00mm
+PinSocket_1x31_P1.00mm_Vertical
+Through hole straight socket strip, 1x31, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x31 1.00mm single row
+0
+31
+31
+Connector_PinSocket_1.00mm
+PinSocket_1x31_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x31, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x31 1.00mm single row style1 pin1 left
+0
+31
+31
+Connector_PinSocket_1.00mm
+PinSocket_1x31_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x31, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x31 1.00mm single row style2 pin1 right
+0
+31
+31
+Connector_PinSocket_1.00mm
+PinSocket_1x32_P1.00mm_Vertical
+Through hole straight socket strip, 1x32, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x32 1.00mm single row
+0
+32
+32
+Connector_PinSocket_1.00mm
+PinSocket_1x32_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x32, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x32 1.00mm single row style1 pin1 left
+0
+32
+32
+Connector_PinSocket_1.00mm
+PinSocket_1x32_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x32, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x32 1.00mm single row style2 pin1 right
+0
+32
+32
+Connector_PinSocket_1.00mm
+PinSocket_1x33_P1.00mm_Vertical
+Through hole straight socket strip, 1x33, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x33 1.00mm single row
+0
+33
+33
+Connector_PinSocket_1.00mm
+PinSocket_1x33_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x33, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x33 1.00mm single row style1 pin1 left
+0
+33
+33
+Connector_PinSocket_1.00mm
+PinSocket_1x33_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x33, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x33 1.00mm single row style2 pin1 right
+0
+33
+33
+Connector_PinSocket_1.00mm
+PinSocket_1x34_P1.00mm_Vertical
+Through hole straight socket strip, 1x34, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x34 1.00mm single row
+0
+34
+34
+Connector_PinSocket_1.00mm
+PinSocket_1x34_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x34, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x34 1.00mm single row style1 pin1 left
+0
+34
+34
+Connector_PinSocket_1.00mm
+PinSocket_1x34_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x34, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x34 1.00mm single row style2 pin1 right
+0
+34
+34
+Connector_PinSocket_1.00mm
+PinSocket_1x35_P1.00mm_Vertical
+Through hole straight socket strip, 1x35, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x35 1.00mm single row
+0
+35
+35
+Connector_PinSocket_1.00mm
+PinSocket_1x35_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x35, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x35 1.00mm single row style1 pin1 left
+0
+35
+35
+Connector_PinSocket_1.00mm
+PinSocket_1x35_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x35, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x35 1.00mm single row style2 pin1 right
+0
+35
+35
+Connector_PinSocket_1.00mm
+PinSocket_1x36_P1.00mm_Vertical
+Through hole straight socket strip, 1x36, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x36 1.00mm single row
+0
+36
+36
+Connector_PinSocket_1.00mm
+PinSocket_1x36_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x36, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x36 1.00mm single row style1 pin1 left
+0
+36
+36
+Connector_PinSocket_1.00mm
+PinSocket_1x36_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x36, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x36 1.00mm single row style2 pin1 right
+0
+36
+36
+Connector_PinSocket_1.00mm
+PinSocket_1x37_P1.00mm_Vertical
+Through hole straight socket strip, 1x37, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x37 1.00mm single row
+0
+37
+37
+Connector_PinSocket_1.00mm
+PinSocket_1x37_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x37, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x37 1.00mm single row style1 pin1 left
+0
+37
+37
+Connector_PinSocket_1.00mm
+PinSocket_1x37_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x37, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x37 1.00mm single row style2 pin1 right
+0
+37
+37
+Connector_PinSocket_1.00mm
+PinSocket_1x38_P1.00mm_Vertical
+Through hole straight socket strip, 1x38, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x38 1.00mm single row
+0
+38
+38
+Connector_PinSocket_1.00mm
+PinSocket_1x38_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x38, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x38 1.00mm single row style1 pin1 left
+0
+38
+38
+Connector_PinSocket_1.00mm
+PinSocket_1x38_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x38, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x38 1.00mm single row style2 pin1 right
+0
+38
+38
+Connector_PinSocket_1.00mm
+PinSocket_1x39_P1.00mm_Vertical
+Through hole straight socket strip, 1x39, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x39 1.00mm single row
+0
+39
+39
+Connector_PinSocket_1.00mm
+PinSocket_1x39_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x39, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x39 1.00mm single row style1 pin1 left
+0
+39
+39
+Connector_PinSocket_1.00mm
+PinSocket_1x39_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x39, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x39 1.00mm single row style2 pin1 right
+0
+39
+39
+Connector_PinSocket_1.00mm
+PinSocket_1x40_P1.00mm_Vertical
+Through hole straight socket strip, 1x40, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated
+Through hole socket strip THT 1x40 1.00mm single row
+0
+40
+40
+Connector_PinSocket_1.00mm
+PinSocket_1x40_P1.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x40, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x40 1.00mm single row style1 pin1 left
+0
+40
+40
+Connector_PinSocket_1.00mm
+PinSocket_1x40_P1.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x40, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated
+Surface mounted socket strip SMD 1x40 1.00mm single row style2 pin1 right
+0
+40
+40
+Connector_PinSocket_1.00mm
+PinSocket_2x02_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x02, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x02 1.00mm double row
+0
+4
+4
+Connector_PinSocket_1.00mm
+PinSocket_2x03_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x03, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x03 1.00mm double row
+0
+6
+6
+Connector_PinSocket_1.00mm
+PinSocket_2x04_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x04, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x04 1.00mm double row
+0
+8
+8
+Connector_PinSocket_1.00mm
+PinSocket_2x05_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x05, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x05 1.00mm double row
+0
+10
+10
+Connector_PinSocket_1.00mm
+PinSocket_2x06_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x06, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x06 1.00mm double row
+0
+12
+12
+Connector_PinSocket_1.00mm
+PinSocket_2x07_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x07, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x07 1.00mm double row
+0
+14
+14
+Connector_PinSocket_1.00mm
+PinSocket_2x08_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x08, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x08 1.00mm double row
+0
+16
+16
+Connector_PinSocket_1.00mm
+PinSocket_2x09_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x09, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x09 1.00mm double row
+0
+18
+18
+Connector_PinSocket_1.00mm
+PinSocket_2x10_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x10, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x10 1.00mm double row
+0
+20
+20
+Connector_PinSocket_1.00mm
+PinSocket_2x11_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x11, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x11 1.00mm double row
+0
+22
+22
+Connector_PinSocket_1.00mm
+PinSocket_2x12_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x12, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x12 1.00mm double row
+0
+24
+24
+Connector_PinSocket_1.00mm
+PinSocket_2x13_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x13, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x13 1.00mm double row
+0
+26
+26
+Connector_PinSocket_1.00mm
+PinSocket_2x14_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x14, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x14 1.00mm double row
+0
+28
+28
+Connector_PinSocket_1.00mm
+PinSocket_2x15_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x15, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x15 1.00mm double row
+0
+30
+30
+Connector_PinSocket_1.00mm
+PinSocket_2x16_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x16, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x16 1.00mm double row
+0
+32
+32
+Connector_PinSocket_1.00mm
+PinSocket_2x17_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x17, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x17 1.00mm double row
+0
+34
+34
+Connector_PinSocket_1.00mm
+PinSocket_2x18_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x18, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x18 1.00mm double row
+0
+36
+36
+Connector_PinSocket_1.00mm
+PinSocket_2x19_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x19, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x19 1.00mm double row
+0
+38
+38
+Connector_PinSocket_1.00mm
+PinSocket_2x20_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x20, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x20 1.00mm double row
+0
+40
+40
+Connector_PinSocket_1.00mm
+PinSocket_2x21_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x21, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x21 1.00mm double row
+0
+42
+42
+Connector_PinSocket_1.00mm
+PinSocket_2x22_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x22, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x22 1.00mm double row
+0
+44
+44
+Connector_PinSocket_1.00mm
+PinSocket_2x23_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x23, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x23 1.00mm double row
+0
+46
+46
+Connector_PinSocket_1.00mm
+PinSocket_2x24_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x24, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x24 1.00mm double row
+0
+48
+48
+Connector_PinSocket_1.00mm
+PinSocket_2x25_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x25, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x25 1.00mm double row
+0
+50
+50
+Connector_PinSocket_1.00mm
+PinSocket_2x26_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x26, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x26 1.00mm double row
+0
+52
+52
+Connector_PinSocket_1.00mm
+PinSocket_2x27_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x27, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x27 1.00mm double row
+0
+54
+54
+Connector_PinSocket_1.00mm
+PinSocket_2x28_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x28, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x28 1.00mm double row
+0
+56
+56
+Connector_PinSocket_1.00mm
+PinSocket_2x29_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x29, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x29 1.00mm double row
+0
+58
+58
+Connector_PinSocket_1.00mm
+PinSocket_2x30_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x30, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x30 1.00mm double row
+0
+60
+60
+Connector_PinSocket_1.00mm
+PinSocket_2x31_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x31, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x31 1.00mm double row
+0
+62
+62
+Connector_PinSocket_1.00mm
+PinSocket_2x32_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x32, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x32 1.00mm double row
+0
+64
+64
+Connector_PinSocket_1.00mm
+PinSocket_2x33_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x33, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x33 1.00mm double row
+0
+66
+66
+Connector_PinSocket_1.00mm
+PinSocket_2x34_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x34, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x34 1.00mm double row
+0
+68
+68
+Connector_PinSocket_1.00mm
+PinSocket_2x35_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x35, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x35 1.00mm double row
+0
+70
+70
+Connector_PinSocket_1.00mm
+PinSocket_2x36_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x36, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x36 1.00mm double row
+0
+72
+72
+Connector_PinSocket_1.00mm
+PinSocket_2x37_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x37, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x37 1.00mm double row
+0
+74
+74
+Connector_PinSocket_1.00mm
+PinSocket_2x38_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x38, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x38 1.00mm double row
+0
+76
+76
+Connector_PinSocket_1.00mm
+PinSocket_2x39_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x39, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x39 1.00mm double row
+0
+78
+78
+Connector_PinSocket_1.00mm
+PinSocket_2x40_P1.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x40, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated
+Surface mounted socket strip SMD 2x40 1.00mm double row
+0
+80
+80
+Connector_PinSocket_1.27mm
+PinSocket_1x01_P1.27mm_Vertical
+Through hole straight socket strip, 1x01, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x01 1.27mm single row
+0
+1
+1
+Connector_PinSocket_1.27mm
+PinSocket_1x02_P1.27mm_Vertical
+Through hole straight socket strip, 1x02, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x02 1.27mm single row
+0
+2
+2
+Connector_PinSocket_1.27mm
+PinSocket_1x02_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x02, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x02 1.27mm single row style1 pin1 left
+0
+2
+2
+Connector_PinSocket_1.27mm
+PinSocket_1x02_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x02, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x02 1.27mm single row style2 pin1 right
+0
+2
+2
+Connector_PinSocket_1.27mm
+PinSocket_1x03_P1.27mm_Vertical
+Through hole straight socket strip, 1x03, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x03 1.27mm single row
+0
+3
+3
+Connector_PinSocket_1.27mm
+PinSocket_1x03_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x03, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x03 1.27mm single row style1 pin1 left
+0
+3
+3
+Connector_PinSocket_1.27mm
+PinSocket_1x03_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x03, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x03 1.27mm single row style2 pin1 right
+0
+3
+3
+Connector_PinSocket_1.27mm
+PinSocket_1x04_P1.27mm_Vertical
+Through hole straight socket strip, 1x04, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x04 1.27mm single row
+0
+4
+4
+Connector_PinSocket_1.27mm
+PinSocket_1x04_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x04, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x04 1.27mm single row style1 pin1 left
+0
+4
+4
+Connector_PinSocket_1.27mm
+PinSocket_1x04_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x04, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x04 1.27mm single row style2 pin1 right
+0
+4
+4
+Connector_PinSocket_1.27mm
+PinSocket_1x05_P1.27mm_Vertical
+Through hole straight socket strip, 1x05, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x05 1.27mm single row
+0
+5
+5
+Connector_PinSocket_1.27mm
+PinSocket_1x05_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x05, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x05 1.27mm single row style1 pin1 left
+0
+5
+5
+Connector_PinSocket_1.27mm
+PinSocket_1x05_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x05, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x05 1.27mm single row style2 pin1 right
+0
+5
+5
+Connector_PinSocket_1.27mm
+PinSocket_1x06_P1.27mm_Vertical
+Through hole straight socket strip, 1x06, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x06 1.27mm single row
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_1x06_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x06, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x06 1.27mm single row style1 pin1 left
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_1x06_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x06, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x06 1.27mm single row style2 pin1 right
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_1x07_P1.27mm_Vertical
+Through hole straight socket strip, 1x07, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x07 1.27mm single row
+0
+7
+7
+Connector_PinSocket_1.27mm
+PinSocket_1x07_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x07, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x07 1.27mm single row style1 pin1 left
+0
+7
+7
+Connector_PinSocket_1.27mm
+PinSocket_1x07_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x07, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x07 1.27mm single row style2 pin1 right
+0
+7
+7
+Connector_PinSocket_1.27mm
+PinSocket_1x08_P1.27mm_Vertical
+Through hole straight socket strip, 1x08, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x08 1.27mm single row
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_1x08_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x08, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x08 1.27mm single row style1 pin1 left
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_1x08_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x08, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x08 1.27mm single row style2 pin1 right
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_1x09_P1.27mm_Vertical
+Through hole straight socket strip, 1x09, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x09 1.27mm single row
+0
+9
+9
+Connector_PinSocket_1.27mm
+PinSocket_1x09_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x09, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x09 1.27mm single row style1 pin1 left
+0
+9
+9
+Connector_PinSocket_1.27mm
+PinSocket_1x09_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x09, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x09 1.27mm single row style2 pin1 right
+0
+9
+9
+Connector_PinSocket_1.27mm
+PinSocket_1x10_P1.27mm_Vertical
+Through hole straight socket strip, 1x10, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x10 1.27mm single row
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_1x10_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x10, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x10 1.27mm single row style1 pin1 left
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_1x10_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x10, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x10 1.27mm single row style2 pin1 right
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_1x11_P1.27mm_Vertical
+Through hole straight socket strip, 1x11, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x11 1.27mm single row
+0
+11
+11
+Connector_PinSocket_1.27mm
+PinSocket_1x11_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x11, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x11 1.27mm single row style1 pin1 left
+0
+11
+11
+Connector_PinSocket_1.27mm
+PinSocket_1x11_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x11, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x11 1.27mm single row style2 pin1 right
+0
+11
+11
+Connector_PinSocket_1.27mm
+PinSocket_1x12_P1.27mm_Vertical
+Through hole straight socket strip, 1x12, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x12 1.27mm single row
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_1x12_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x12, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x12 1.27mm single row style1 pin1 left
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_1x12_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x12, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x12 1.27mm single row style2 pin1 right
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_1x13_P1.27mm_Vertical
+Through hole straight socket strip, 1x13, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x13 1.27mm single row
+0
+13
+13
+Connector_PinSocket_1.27mm
+PinSocket_1x13_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x13, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x13 1.27mm single row style1 pin1 left
+0
+13
+13
+Connector_PinSocket_1.27mm
+PinSocket_1x13_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x13, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x13 1.27mm single row style2 pin1 right
+0
+13
+13
+Connector_PinSocket_1.27mm
+PinSocket_1x14_P1.27mm_Vertical
+Through hole straight socket strip, 1x14, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x14 1.27mm single row
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_1x14_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x14, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x14 1.27mm single row style1 pin1 left
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_1x14_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x14, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x14 1.27mm single row style2 pin1 right
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_1x15_P1.27mm_Vertical
+Through hole straight socket strip, 1x15, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x15 1.27mm single row
+0
+15
+15
+Connector_PinSocket_1.27mm
+PinSocket_1x15_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x15, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x15 1.27mm single row style1 pin1 left
+0
+15
+15
+Connector_PinSocket_1.27mm
+PinSocket_1x15_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x15, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x15 1.27mm single row style2 pin1 right
+0
+15
+15
+Connector_PinSocket_1.27mm
+PinSocket_1x16_P1.27mm_Vertical
+Through hole straight socket strip, 1x16, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x16 1.27mm single row
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_1x16_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x16, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x16 1.27mm single row style1 pin1 left
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_1x16_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x16, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x16 1.27mm single row style2 pin1 right
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_1x17_P1.27mm_Vertical
+Through hole straight socket strip, 1x17, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x17 1.27mm single row
+0
+17
+17
+Connector_PinSocket_1.27mm
+PinSocket_1x17_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x17, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x17 1.27mm single row style1 pin1 left
+0
+17
+17
+Connector_PinSocket_1.27mm
+PinSocket_1x17_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x17, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x17 1.27mm single row style2 pin1 right
+0
+17
+17
+Connector_PinSocket_1.27mm
+PinSocket_1x18_P1.27mm_Vertical
+Through hole straight socket strip, 1x18, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x18 1.27mm single row
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_1x18_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x18, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x18 1.27mm single row style1 pin1 left
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_1x18_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x18, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x18 1.27mm single row style2 pin1 right
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_1x19_P1.27mm_Vertical
+Through hole straight socket strip, 1x19, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x19 1.27mm single row
+0
+19
+19
+Connector_PinSocket_1.27mm
+PinSocket_1x19_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x19, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x19 1.27mm single row style1 pin1 left
+0
+19
+19
+Connector_PinSocket_1.27mm
+PinSocket_1x19_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x19, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x19 1.27mm single row style2 pin1 right
+0
+19
+19
+Connector_PinSocket_1.27mm
+PinSocket_1x20_P1.27mm_Vertical
+Through hole straight socket strip, 1x20, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x20 1.27mm single row
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_1x20_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x20, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x20 1.27mm single row style1 pin1 left
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_1x20_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x20, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x20 1.27mm single row style2 pin1 right
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_1x21_P1.27mm_Vertical
+Through hole straight socket strip, 1x21, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x21 1.27mm single row
+0
+21
+21
+Connector_PinSocket_1.27mm
+PinSocket_1x21_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x21, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x21 1.27mm single row style1 pin1 left
+0
+21
+21
+Connector_PinSocket_1.27mm
+PinSocket_1x21_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x21, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x21 1.27mm single row style2 pin1 right
+0
+21
+21
+Connector_PinSocket_1.27mm
+PinSocket_1x22_P1.27mm_Vertical
+Through hole straight socket strip, 1x22, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x22 1.27mm single row
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_1x22_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x22, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x22 1.27mm single row style1 pin1 left
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_1x22_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x22, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x22 1.27mm single row style2 pin1 right
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_1x23_P1.27mm_Vertical
+Through hole straight socket strip, 1x23, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x23 1.27mm single row
+0
+23
+23
+Connector_PinSocket_1.27mm
+PinSocket_1x23_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x23, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x23 1.27mm single row style1 pin1 left
+0
+23
+23
+Connector_PinSocket_1.27mm
+PinSocket_1x23_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x23, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x23 1.27mm single row style2 pin1 right
+0
+23
+23
+Connector_PinSocket_1.27mm
+PinSocket_1x24_P1.27mm_Vertical
+Through hole straight socket strip, 1x24, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x24 1.27mm single row
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_1x24_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x24, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x24 1.27mm single row style1 pin1 left
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_1x24_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x24, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x24 1.27mm single row style2 pin1 right
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_1x25_P1.27mm_Vertical
+Through hole straight socket strip, 1x25, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x25 1.27mm single row
+0
+25
+25
+Connector_PinSocket_1.27mm
+PinSocket_1x25_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x25, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x25 1.27mm single row style1 pin1 left
+0
+25
+25
+Connector_PinSocket_1.27mm
+PinSocket_1x25_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x25, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x25 1.27mm single row style2 pin1 right
+0
+25
+25
+Connector_PinSocket_1.27mm
+PinSocket_1x26_P1.27mm_Vertical
+Through hole straight socket strip, 1x26, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x26 1.27mm single row
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_1x26_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x26, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x26 1.27mm single row style1 pin1 left
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_1x26_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x26, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x26 1.27mm single row style2 pin1 right
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_1x27_P1.27mm_Vertical
+Through hole straight socket strip, 1x27, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x27 1.27mm single row
+0
+27
+27
+Connector_PinSocket_1.27mm
+PinSocket_1x27_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x27, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x27 1.27mm single row style1 pin1 left
+0
+27
+27
+Connector_PinSocket_1.27mm
+PinSocket_1x27_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x27, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x27 1.27mm single row style2 pin1 right
+0
+27
+27
+Connector_PinSocket_1.27mm
+PinSocket_1x28_P1.27mm_Vertical
+Through hole straight socket strip, 1x28, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x28 1.27mm single row
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_1x28_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x28, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x28 1.27mm single row style1 pin1 left
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_1x28_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x28, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x28 1.27mm single row style2 pin1 right
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_1x29_P1.27mm_Vertical
+Through hole straight socket strip, 1x29, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x29 1.27mm single row
+0
+29
+29
+Connector_PinSocket_1.27mm
+PinSocket_1x29_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x29, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x29 1.27mm single row style1 pin1 left
+0
+29
+29
+Connector_PinSocket_1.27mm
+PinSocket_1x29_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x29, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x29 1.27mm single row style2 pin1 right
+0
+29
+29
+Connector_PinSocket_1.27mm
+PinSocket_1x30_P1.27mm_Vertical
+Through hole straight socket strip, 1x30, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x30 1.27mm single row
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_1x30_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x30, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x30 1.27mm single row style1 pin1 left
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_1x30_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x30, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x30 1.27mm single row style2 pin1 right
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_1x31_P1.27mm_Vertical
+Through hole straight socket strip, 1x31, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x31 1.27mm single row
+0
+31
+31
+Connector_PinSocket_1.27mm
+PinSocket_1x31_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x31, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x31 1.27mm single row style1 pin1 left
+0
+31
+31
+Connector_PinSocket_1.27mm
+PinSocket_1x31_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x31, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x31 1.27mm single row style2 pin1 right
+0
+31
+31
+Connector_PinSocket_1.27mm
+PinSocket_1x32_P1.27mm_Vertical
+Through hole straight socket strip, 1x32, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x32 1.27mm single row
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_1x32_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x32, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x32 1.27mm single row style1 pin1 left
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_1x32_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x32, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x32 1.27mm single row style2 pin1 right
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_1x33_P1.27mm_Vertical
+Through hole straight socket strip, 1x33, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x33 1.27mm single row
+0
+33
+33
+Connector_PinSocket_1.27mm
+PinSocket_1x33_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x33, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x33 1.27mm single row style1 pin1 left
+0
+33
+33
+Connector_PinSocket_1.27mm
+PinSocket_1x33_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x33, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x33 1.27mm single row style2 pin1 right
+0
+33
+33
+Connector_PinSocket_1.27mm
+PinSocket_1x34_P1.27mm_Vertical
+Through hole straight socket strip, 1x34, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x34 1.27mm single row
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_1x34_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x34, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x34 1.27mm single row style1 pin1 left
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_1x34_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x34, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x34 1.27mm single row style2 pin1 right
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_1x35_P1.27mm_Vertical
+Through hole straight socket strip, 1x35, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x35 1.27mm single row
+0
+35
+35
+Connector_PinSocket_1.27mm
+PinSocket_1x35_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x35, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x35 1.27mm single row style1 pin1 left
+0
+35
+35
+Connector_PinSocket_1.27mm
+PinSocket_1x35_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x35, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x35 1.27mm single row style2 pin1 right
+0
+35
+35
+Connector_PinSocket_1.27mm
+PinSocket_1x36_P1.27mm_Vertical
+Through hole straight socket strip, 1x36, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x36 1.27mm single row
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_1x36_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x36, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x36 1.27mm single row style1 pin1 left
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_1x36_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x36, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x36 1.27mm single row style2 pin1 right
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_1x37_P1.27mm_Vertical
+Through hole straight socket strip, 1x37, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x37 1.27mm single row
+0
+37
+37
+Connector_PinSocket_1.27mm
+PinSocket_1x37_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x37, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x37 1.27mm single row style1 pin1 left
+0
+37
+37
+Connector_PinSocket_1.27mm
+PinSocket_1x37_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x37, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x37 1.27mm single row style2 pin1 right
+0
+37
+37
+Connector_PinSocket_1.27mm
+PinSocket_1x38_P1.27mm_Vertical
+Through hole straight socket strip, 1x38, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x38 1.27mm single row
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_1x38_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x38, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x38 1.27mm single row style1 pin1 left
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_1x38_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x38, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x38 1.27mm single row style2 pin1 right
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_1x39_P1.27mm_Vertical
+Through hole straight socket strip, 1x39, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x39 1.27mm single row
+0
+39
+39
+Connector_PinSocket_1.27mm
+PinSocket_1x39_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x39, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x39 1.27mm single row style1 pin1 left
+0
+39
+39
+Connector_PinSocket_1.27mm
+PinSocket_1x39_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x39, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x39 1.27mm single row style2 pin1 right
+0
+39
+39
+Connector_PinSocket_1.27mm
+PinSocket_1x40_P1.27mm_Vertical
+Through hole straight socket strip, 1x40, 1.27mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x40 1.27mm single row
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_1x40_P1.27mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x40, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x40 1.27mm single row style1 pin1 left
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_1x40_P1.27mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x40, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated
+Surface mounted socket strip SMD 1x40 1.27mm single row style2 pin1 right
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_2x01_P1.27mm_Vertical
+Through hole straight socket strip, 2x01, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x01 1.27mm double row
+0
+2
+2
+Connector_PinSocket_1.27mm
+PinSocket_2x01_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x01, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x01 1.27mm double row
+0
+2
+2
+Connector_PinSocket_1.27mm
+PinSocket_2x02_P1.27mm_Vertical
+Through hole straight socket strip, 2x02, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x02 1.27mm double row
+0
+4
+4
+Connector_PinSocket_1.27mm
+PinSocket_2x02_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x02, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x02 1.27mm double row
+0
+4
+4
+Connector_PinSocket_1.27mm
+PinSocket_2x03_P1.27mm_Horizontal
+Through hole angled socket strip, 2x03, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x03 1.27mm double row
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_2x03_P1.27mm_Vertical
+Through hole straight socket strip, 2x03, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x03 1.27mm double row
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_2x03_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x03, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x03 1.27mm double row
+0
+6
+6
+Connector_PinSocket_1.27mm
+PinSocket_2x04_P1.27mm_Horizontal
+Through hole angled socket strip, 2x04, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x04 1.27mm double row
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_2x04_P1.27mm_Vertical
+Through hole straight socket strip, 2x04, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x04 1.27mm double row
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_2x04_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x04, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x04 1.27mm double row
+0
+8
+8
+Connector_PinSocket_1.27mm
+PinSocket_2x05_P1.27mm_Horizontal
+Through hole angled socket strip, 2x05, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x05 1.27mm double row
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_2x05_P1.27mm_Vertical
+Through hole straight socket strip, 2x05, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x05 1.27mm double row
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_2x05_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x05, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x05 1.27mm double row
+0
+10
+10
+Connector_PinSocket_1.27mm
+PinSocket_2x06_P1.27mm_Horizontal
+Through hole angled socket strip, 2x06, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x06 1.27mm double row
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_2x06_P1.27mm_Vertical
+Through hole straight socket strip, 2x06, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x06 1.27mm double row
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_2x06_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x06, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x06 1.27mm double row
+0
+12
+12
+Connector_PinSocket_1.27mm
+PinSocket_2x07_P1.27mm_Horizontal
+Through hole angled socket strip, 2x07, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x07 1.27mm double row
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_2x07_P1.27mm_Vertical
+Through hole straight socket strip, 2x07, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x07 1.27mm double row
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_2x07_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x07, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x07 1.27mm double row
+0
+14
+14
+Connector_PinSocket_1.27mm
+PinSocket_2x08_P1.27mm_Horizontal
+Through hole angled socket strip, 2x08, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x08 1.27mm double row
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_2x08_P1.27mm_Vertical
+Through hole straight socket strip, 2x08, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x08 1.27mm double row
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_2x08_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x08, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x08 1.27mm double row
+0
+16
+16
+Connector_PinSocket_1.27mm
+PinSocket_2x09_P1.27mm_Horizontal
+Through hole angled socket strip, 2x09, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x09 1.27mm double row
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_2x09_P1.27mm_Vertical
+Through hole straight socket strip, 2x09, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x09 1.27mm double row
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_2x09_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x09, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x09 1.27mm double row
+0
+18
+18
+Connector_PinSocket_1.27mm
+PinSocket_2x10_P1.27mm_Horizontal
+Through hole angled socket strip, 2x10, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x10 1.27mm double row
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_2x10_P1.27mm_Vertical
+Through hole straight socket strip, 2x10, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x10 1.27mm double row
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_2x10_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x10, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x10 1.27mm double row
+0
+20
+20
+Connector_PinSocket_1.27mm
+PinSocket_2x11_P1.27mm_Horizontal
+Through hole angled socket strip, 2x11, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x11 1.27mm double row
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_2x11_P1.27mm_Vertical
+Through hole straight socket strip, 2x11, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x11 1.27mm double row
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_2x11_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x11, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x11 1.27mm double row
+0
+22
+22
+Connector_PinSocket_1.27mm
+PinSocket_2x12_P1.27mm_Horizontal
+Through hole angled socket strip, 2x12, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x12 1.27mm double row
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_2x12_P1.27mm_Vertical
+Through hole straight socket strip, 2x12, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x12 1.27mm double row
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_2x12_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x12, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x12 1.27mm double row
+0
+24
+24
+Connector_PinSocket_1.27mm
+PinSocket_2x13_P1.27mm_Horizontal
+Through hole angled socket strip, 2x13, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x13 1.27mm double row
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_2x13_P1.27mm_Vertical
+Through hole straight socket strip, 2x13, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x13 1.27mm double row
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_2x13_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x13, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x13 1.27mm double row
+0
+26
+26
+Connector_PinSocket_1.27mm
+PinSocket_2x14_P1.27mm_Horizontal
+Through hole angled socket strip, 2x14, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x14 1.27mm double row
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_2x14_P1.27mm_Vertical
+Through hole straight socket strip, 2x14, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x14 1.27mm double row
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_2x14_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x14, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x14 1.27mm double row
+0
+28
+28
+Connector_PinSocket_1.27mm
+PinSocket_2x15_P1.27mm_Horizontal
+Through hole angled socket strip, 2x15, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x15 1.27mm double row
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_2x15_P1.27mm_Vertical
+Through hole straight socket strip, 2x15, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x15 1.27mm double row
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_2x15_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x15, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x15 1.27mm double row
+0
+30
+30
+Connector_PinSocket_1.27mm
+PinSocket_2x16_P1.27mm_Horizontal
+Through hole angled socket strip, 2x16, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x16 1.27mm double row
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_2x16_P1.27mm_Vertical
+Through hole straight socket strip, 2x16, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x16 1.27mm double row
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_2x16_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x16, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x16 1.27mm double row
+0
+32
+32
+Connector_PinSocket_1.27mm
+PinSocket_2x17_P1.27mm_Horizontal
+Through hole angled socket strip, 2x17, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x17 1.27mm double row
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_2x17_P1.27mm_Vertical
+Through hole straight socket strip, 2x17, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x17 1.27mm double row
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_2x17_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x17, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x17 1.27mm double row
+0
+34
+34
+Connector_PinSocket_1.27mm
+PinSocket_2x18_P1.27mm_Horizontal
+Through hole angled socket strip, 2x18, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x18 1.27mm double row
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_2x18_P1.27mm_Vertical
+Through hole straight socket strip, 2x18, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x18 1.27mm double row
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_2x18_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x18, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x18 1.27mm double row
+0
+36
+36
+Connector_PinSocket_1.27mm
+PinSocket_2x19_P1.27mm_Horizontal
+Through hole angled socket strip, 2x19, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x19 1.27mm double row
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_2x19_P1.27mm_Vertical
+Through hole straight socket strip, 2x19, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x19 1.27mm double row
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_2x19_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x19, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x19 1.27mm double row
+0
+38
+38
+Connector_PinSocket_1.27mm
+PinSocket_2x20_P1.27mm_Horizontal
+Through hole angled socket strip, 2x20, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x20 1.27mm double row
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_2x20_P1.27mm_Vertical
+Through hole straight socket strip, 2x20, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x20 1.27mm double row
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_2x20_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x20, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x20 1.27mm double row
+0
+40
+40
+Connector_PinSocket_1.27mm
+PinSocket_2x21_P1.27mm_Horizontal
+Through hole angled socket strip, 2x21, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x21 1.27mm double row
+0
+42
+42
+Connector_PinSocket_1.27mm
+PinSocket_2x21_P1.27mm_Vertical
+Through hole straight socket strip, 2x21, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x21 1.27mm double row
+0
+42
+42
+Connector_PinSocket_1.27mm
+PinSocket_2x21_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x21, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x21 1.27mm double row
+0
+42
+42
+Connector_PinSocket_1.27mm
+PinSocket_2x22_P1.27mm_Horizontal
+Through hole angled socket strip, 2x22, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x22 1.27mm double row
+0
+44
+44
+Connector_PinSocket_1.27mm
+PinSocket_2x22_P1.27mm_Vertical
+Through hole straight socket strip, 2x22, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x22 1.27mm double row
+0
+44
+44
+Connector_PinSocket_1.27mm
+PinSocket_2x22_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x22, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x22 1.27mm double row
+0
+44
+44
+Connector_PinSocket_1.27mm
+PinSocket_2x23_P1.27mm_Horizontal
+Through hole angled socket strip, 2x23, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x23 1.27mm double row
+0
+46
+46
+Connector_PinSocket_1.27mm
+PinSocket_2x23_P1.27mm_Vertical
+Through hole straight socket strip, 2x23, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x23 1.27mm double row
+0
+46
+46
+Connector_PinSocket_1.27mm
+PinSocket_2x23_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x23, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x23 1.27mm double row
+0
+46
+46
+Connector_PinSocket_1.27mm
+PinSocket_2x24_P1.27mm_Horizontal
+Through hole angled socket strip, 2x24, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x24 1.27mm double row
+0
+48
+48
+Connector_PinSocket_1.27mm
+PinSocket_2x24_P1.27mm_Vertical
+Through hole straight socket strip, 2x24, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x24 1.27mm double row
+0
+48
+48
+Connector_PinSocket_1.27mm
+PinSocket_2x24_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x24, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x24 1.27mm double row
+0
+48
+48
+Connector_PinSocket_1.27mm
+PinSocket_2x25_P1.27mm_Horizontal
+Through hole angled socket strip, 2x25, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x25 1.27mm double row
+0
+50
+50
+Connector_PinSocket_1.27mm
+PinSocket_2x25_P1.27mm_Vertical
+Through hole straight socket strip, 2x25, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x25 1.27mm double row
+0
+50
+50
+Connector_PinSocket_1.27mm
+PinSocket_2x25_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x25, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x25 1.27mm double row
+0
+50
+50
+Connector_PinSocket_1.27mm
+PinSocket_2x26_P1.27mm_Horizontal
+Through hole angled socket strip, 2x26, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x26 1.27mm double row
+0
+52
+52
+Connector_PinSocket_1.27mm
+PinSocket_2x26_P1.27mm_Vertical
+Through hole straight socket strip, 2x26, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x26 1.27mm double row
+0
+52
+52
+Connector_PinSocket_1.27mm
+PinSocket_2x26_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x26, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x26 1.27mm double row
+0
+52
+52
+Connector_PinSocket_1.27mm
+PinSocket_2x27_P1.27mm_Horizontal
+Through hole angled socket strip, 2x27, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x27 1.27mm double row
+0
+54
+54
+Connector_PinSocket_1.27mm
+PinSocket_2x27_P1.27mm_Vertical
+Through hole straight socket strip, 2x27, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x27 1.27mm double row
+0
+54
+54
+Connector_PinSocket_1.27mm
+PinSocket_2x27_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x27, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x27 1.27mm double row
+0
+54
+54
+Connector_PinSocket_1.27mm
+PinSocket_2x28_P1.27mm_Horizontal
+Through hole angled socket strip, 2x28, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x28 1.27mm double row
+0
+56
+56
+Connector_PinSocket_1.27mm
+PinSocket_2x28_P1.27mm_Vertical
+Through hole straight socket strip, 2x28, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x28 1.27mm double row
+0
+56
+56
+Connector_PinSocket_1.27mm
+PinSocket_2x28_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x28, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x28 1.27mm double row
+0
+56
+56
+Connector_PinSocket_1.27mm
+PinSocket_2x29_P1.27mm_Horizontal
+Through hole angled socket strip, 2x29, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x29 1.27mm double row
+0
+58
+58
+Connector_PinSocket_1.27mm
+PinSocket_2x29_P1.27mm_Vertical
+Through hole straight socket strip, 2x29, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x29 1.27mm double row
+0
+58
+58
+Connector_PinSocket_1.27mm
+PinSocket_2x29_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x29, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x29 1.27mm double row
+0
+58
+58
+Connector_PinSocket_1.27mm
+PinSocket_2x30_P1.27mm_Horizontal
+Through hole angled socket strip, 2x30, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x30 1.27mm double row
+0
+60
+60
+Connector_PinSocket_1.27mm
+PinSocket_2x30_P1.27mm_Vertical
+Through hole straight socket strip, 2x30, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x30 1.27mm double row
+0
+60
+60
+Connector_PinSocket_1.27mm
+PinSocket_2x30_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x30, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x30 1.27mm double row
+0
+60
+60
+Connector_PinSocket_1.27mm
+PinSocket_2x31_P1.27mm_Horizontal
+Through hole angled socket strip, 2x31, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x31 1.27mm double row
+0
+62
+62
+Connector_PinSocket_1.27mm
+PinSocket_2x31_P1.27mm_Vertical
+Through hole straight socket strip, 2x31, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x31 1.27mm double row
+0
+62
+62
+Connector_PinSocket_1.27mm
+PinSocket_2x31_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x31, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x31 1.27mm double row
+0
+62
+62
+Connector_PinSocket_1.27mm
+PinSocket_2x32_P1.27mm_Horizontal
+Through hole angled socket strip, 2x32, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x32 1.27mm double row
+0
+64
+64
+Connector_PinSocket_1.27mm
+PinSocket_2x32_P1.27mm_Vertical
+Through hole straight socket strip, 2x32, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x32 1.27mm double row
+0
+64
+64
+Connector_PinSocket_1.27mm
+PinSocket_2x32_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x32, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x32 1.27mm double row
+0
+64
+64
+Connector_PinSocket_1.27mm
+PinSocket_2x33_P1.27mm_Horizontal
+Through hole angled socket strip, 2x33, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x33 1.27mm double row
+0
+66
+66
+Connector_PinSocket_1.27mm
+PinSocket_2x33_P1.27mm_Vertical
+Through hole straight socket strip, 2x33, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x33 1.27mm double row
+0
+66
+66
+Connector_PinSocket_1.27mm
+PinSocket_2x33_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x33, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x33 1.27mm double row
+0
+66
+66
+Connector_PinSocket_1.27mm
+PinSocket_2x34_P1.27mm_Horizontal
+Through hole angled socket strip, 2x34, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x34 1.27mm double row
+0
+68
+68
+Connector_PinSocket_1.27mm
+PinSocket_2x34_P1.27mm_Vertical
+Through hole straight socket strip, 2x34, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x34 1.27mm double row
+0
+68
+68
+Connector_PinSocket_1.27mm
+PinSocket_2x34_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x34, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x34 1.27mm double row
+0
+68
+68
+Connector_PinSocket_1.27mm
+PinSocket_2x35_P1.27mm_Horizontal
+Through hole angled socket strip, 2x35, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x35 1.27mm double row
+0
+70
+70
+Connector_PinSocket_1.27mm
+PinSocket_2x35_P1.27mm_Vertical
+Through hole straight socket strip, 2x35, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x35 1.27mm double row
+0
+70
+70
+Connector_PinSocket_1.27mm
+PinSocket_2x35_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x35, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x35 1.27mm double row
+0
+70
+70
+Connector_PinSocket_1.27mm
+PinSocket_2x36_P1.27mm_Horizontal
+Through hole angled socket strip, 2x36, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x36 1.27mm double row
+0
+72
+72
+Connector_PinSocket_1.27mm
+PinSocket_2x36_P1.27mm_Vertical
+Through hole straight socket strip, 2x36, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x36 1.27mm double row
+0
+72
+72
+Connector_PinSocket_1.27mm
+PinSocket_2x36_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x36, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x36 1.27mm double row
+0
+72
+72
+Connector_PinSocket_1.27mm
+PinSocket_2x37_P1.27mm_Horizontal
+Through hole angled socket strip, 2x37, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x37 1.27mm double row
+0
+74
+74
+Connector_PinSocket_1.27mm
+PinSocket_2x37_P1.27mm_Vertical
+Through hole straight socket strip, 2x37, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x37 1.27mm double row
+0
+74
+74
+Connector_PinSocket_1.27mm
+PinSocket_2x37_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x37, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x37 1.27mm double row
+0
+74
+74
+Connector_PinSocket_1.27mm
+PinSocket_2x38_P1.27mm_Horizontal
+Through hole angled socket strip, 2x38, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x38 1.27mm double row
+0
+76
+76
+Connector_PinSocket_1.27mm
+PinSocket_2x38_P1.27mm_Vertical
+Through hole straight socket strip, 2x38, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x38 1.27mm double row
+0
+76
+76
+Connector_PinSocket_1.27mm
+PinSocket_2x38_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x38, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x38 1.27mm double row
+0
+76
+76
+Connector_PinSocket_1.27mm
+PinSocket_2x39_P1.27mm_Horizontal
+Through hole angled socket strip, 2x39, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x39 1.27mm double row
+0
+78
+78
+Connector_PinSocket_1.27mm
+PinSocket_2x39_P1.27mm_Vertical
+Through hole straight socket strip, 2x39, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x39 1.27mm double row
+0
+78
+78
+Connector_PinSocket_1.27mm
+PinSocket_2x39_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x39, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x39 1.27mm double row
+0
+78
+78
+Connector_PinSocket_1.27mm
+PinSocket_2x40_P1.27mm_Horizontal
+Through hole angled socket strip, 2x40, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x40 1.27mm double row
+0
+80
+80
+Connector_PinSocket_1.27mm
+PinSocket_2x40_P1.27mm_Vertical
+Through hole straight socket strip, 2x40, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x40 1.27mm double row
+0
+80
+80
+Connector_PinSocket_1.27mm
+PinSocket_2x40_P1.27mm_Vertical_SMD
+surface-mounted straight socket strip, 2x40, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated
+Surface mounted socket strip SMD 2x40 1.27mm double row
+0
+80
+80
+Connector_PinSocket_1.27mm
+PinSocket_2x41_P1.27mm_Horizontal
+Through hole angled socket strip, 2x41, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x41 1.27mm double row
+0
+82
+82
+Connector_PinSocket_1.27mm
+PinSocket_2x42_P1.27mm_Horizontal
+Through hole angled socket strip, 2x42, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x42 1.27mm double row
+0
+84
+84
+Connector_PinSocket_1.27mm
+PinSocket_2x43_P1.27mm_Horizontal
+Through hole angled socket strip, 2x43, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x43 1.27mm double row
+0
+86
+86
+Connector_PinSocket_1.27mm
+PinSocket_2x44_P1.27mm_Horizontal
+Through hole angled socket strip, 2x44, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x44 1.27mm double row
+0
+88
+88
+Connector_PinSocket_1.27mm
+PinSocket_2x45_P1.27mm_Horizontal
+Through hole angled socket strip, 2x45, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x45 1.27mm double row
+0
+90
+90
+Connector_PinSocket_1.27mm
+PinSocket_2x46_P1.27mm_Horizontal
+Through hole angled socket strip, 2x46, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x46 1.27mm double row
+0
+92
+92
+Connector_PinSocket_1.27mm
+PinSocket_2x47_P1.27mm_Horizontal
+Through hole angled socket strip, 2x47, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x47 1.27mm double row
+0
+94
+94
+Connector_PinSocket_1.27mm
+PinSocket_2x48_P1.27mm_Horizontal
+Through hole angled socket strip, 2x48, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x48 1.27mm double row
+0
+96
+96
+Connector_PinSocket_1.27mm
+PinSocket_2x49_P1.27mm_Horizontal
+Through hole angled socket strip, 2x49, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x49 1.27mm double row
+0
+98
+98
+Connector_PinSocket_1.27mm
+PinSocket_2x50_P1.27mm_Horizontal
+Through hole angled socket strip, 2x50, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated
+Through hole angled socket strip THT 2x50 1.27mm double row
+0
+100
+100
+Connector_PinSocket_2.00mm
+PinSocket_1x01_P2.00mm_Horizontal
+Through hole angled socket strip, 1x01, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x01 2.00mm single row
+0
+1
+1
+Connector_PinSocket_2.00mm
+PinSocket_1x01_P2.00mm_Vertical
+Through hole straight socket strip, 1x01, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x01 2.00mm single row
+0
+1
+1
+Connector_PinSocket_2.00mm
+PinSocket_1x02_P2.00mm_Horizontal
+Through hole angled socket strip, 1x02, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x02 2.00mm single row
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_1x02_P2.00mm_Vertical
+Through hole straight socket strip, 1x02, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x02 2.00mm single row
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_1x02_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x02, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x02 2.00mm single row style1 pin1 left
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_1x02_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x02, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x02 2.00mm single row style2 pin1 right
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_1x03_P2.00mm_Horizontal
+Through hole angled socket strip, 1x03, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x03 2.00mm single row
+0
+3
+3
+Connector_PinSocket_2.00mm
+PinSocket_1x03_P2.00mm_Vertical
+Through hole straight socket strip, 1x03, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x03 2.00mm single row
+0
+3
+3
+Connector_PinSocket_2.00mm
+PinSocket_1x03_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x03, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x03 2.00mm single row style1 pin1 left
+0
+3
+3
+Connector_PinSocket_2.00mm
+PinSocket_1x03_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x03, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x03 2.00mm single row style2 pin1 right
+0
+3
+3
+Connector_PinSocket_2.00mm
+PinSocket_1x04_P2.00mm_Horizontal
+Through hole angled socket strip, 1x04, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x04 2.00mm single row
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_1x04_P2.00mm_Vertical
+Through hole straight socket strip, 1x04, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x04 2.00mm single row
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_1x04_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x04, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x04 2.00mm single row style1 pin1 left
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_1x04_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x04, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x04 2.00mm single row style2 pin1 right
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_1x05_P2.00mm_Horizontal
+Through hole angled socket strip, 1x05, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x05 2.00mm single row
+0
+5
+5
+Connector_PinSocket_2.00mm
+PinSocket_1x05_P2.00mm_Vertical
+Through hole straight socket strip, 1x05, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x05 2.00mm single row
+0
+5
+5
+Connector_PinSocket_2.00mm
+PinSocket_1x05_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x05, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x05 2.00mm single row style1 pin1 left
+0
+5
+5
+Connector_PinSocket_2.00mm
+PinSocket_1x05_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x05, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x05 2.00mm single row style2 pin1 right
+0
+5
+5
+Connector_PinSocket_2.00mm
+PinSocket_1x06_P2.00mm_Horizontal
+Through hole angled socket strip, 1x06, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x06 2.00mm single row
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_1x06_P2.00mm_Vertical
+Through hole straight socket strip, 1x06, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x06 2.00mm single row
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x06, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x06 2.00mm single row style1 pin1 left
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x06, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x06 2.00mm single row style2 pin1 right
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_1x07_P2.00mm_Horizontal
+Through hole angled socket strip, 1x07, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x07 2.00mm single row
+0
+7
+7
+Connector_PinSocket_2.00mm
+PinSocket_1x07_P2.00mm_Vertical
+Through hole straight socket strip, 1x07, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x07 2.00mm single row
+0
+7
+7
+Connector_PinSocket_2.00mm
+PinSocket_1x07_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x07, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x07 2.00mm single row style1 pin1 left
+0
+7
+7
+Connector_PinSocket_2.00mm
+PinSocket_1x07_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x07, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x07 2.00mm single row style2 pin1 right
+0
+7
+7
+Connector_PinSocket_2.00mm
+PinSocket_1x08_P2.00mm_Horizontal
+Through hole angled socket strip, 1x08, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x08 2.00mm single row
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_1x08_P2.00mm_Vertical
+Through hole straight socket strip, 1x08, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x08 2.00mm single row
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_1x08_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x08, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x08 2.00mm single row style1 pin1 left
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_1x08_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x08, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x08 2.00mm single row style2 pin1 right
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_1x09_P2.00mm_Horizontal
+Through hole angled socket strip, 1x09, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x09 2.00mm single row
+0
+9
+9
+Connector_PinSocket_2.00mm
+PinSocket_1x09_P2.00mm_Vertical
+Through hole straight socket strip, 1x09, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x09 2.00mm single row
+0
+9
+9
+Connector_PinSocket_2.00mm
+PinSocket_1x09_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x09, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x09 2.00mm single row style1 pin1 left
+0
+9
+9
+Connector_PinSocket_2.00mm
+PinSocket_1x09_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x09, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x09 2.00mm single row style2 pin1 right
+0
+9
+9
+Connector_PinSocket_2.00mm
+PinSocket_1x10_P2.00mm_Horizontal
+Through hole angled socket strip, 1x10, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x10 2.00mm single row
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_1x10_P2.00mm_Vertical
+Through hole straight socket strip, 1x10, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x10 2.00mm single row
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_1x10_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x10, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x10 2.00mm single row style1 pin1 left
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_1x10_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x10, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x10 2.00mm single row style2 pin1 right
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_1x11_P2.00mm_Horizontal
+Through hole angled socket strip, 1x11, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x11 2.00mm single row
+0
+11
+11
+Connector_PinSocket_2.00mm
+PinSocket_1x11_P2.00mm_Vertical
+Through hole straight socket strip, 1x11, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x11 2.00mm single row
+0
+11
+11
+Connector_PinSocket_2.00mm
+PinSocket_1x11_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x11, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x11 2.00mm single row style1 pin1 left
+0
+11
+11
+Connector_PinSocket_2.00mm
+PinSocket_1x11_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x11, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x11 2.00mm single row style2 pin1 right
+0
+11
+11
+Connector_PinSocket_2.00mm
+PinSocket_1x12_P2.00mm_Horizontal
+Through hole angled socket strip, 1x12, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x12 2.00mm single row
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_1x12_P2.00mm_Vertical
+Through hole straight socket strip, 1x12, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x12 2.00mm single row
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_1x12_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x12, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x12 2.00mm single row style1 pin1 left
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_1x12_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x12, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x12 2.00mm single row style2 pin1 right
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_1x13_P2.00mm_Horizontal
+Through hole angled socket strip, 1x13, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x13 2.00mm single row
+0
+13
+13
+Connector_PinSocket_2.00mm
+PinSocket_1x13_P2.00mm_Vertical
+Through hole straight socket strip, 1x13, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x13 2.00mm single row
+0
+13
+13
+Connector_PinSocket_2.00mm
+PinSocket_1x13_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x13, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x13 2.00mm single row style1 pin1 left
+0
+13
+13
+Connector_PinSocket_2.00mm
+PinSocket_1x13_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x13, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x13 2.00mm single row style2 pin1 right
+0
+13
+13
+Connector_PinSocket_2.00mm
+PinSocket_1x14_P2.00mm_Horizontal
+Through hole angled socket strip, 1x14, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x14 2.00mm single row
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_1x14_P2.00mm_Vertical
+Through hole straight socket strip, 1x14, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x14 2.00mm single row
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_1x14_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x14, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x14 2.00mm single row style1 pin1 left
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_1x14_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x14, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x14 2.00mm single row style2 pin1 right
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_1x15_P2.00mm_Horizontal
+Through hole angled socket strip, 1x15, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x15 2.00mm single row
+0
+15
+15
+Connector_PinSocket_2.00mm
+PinSocket_1x15_P2.00mm_Vertical
+Through hole straight socket strip, 1x15, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x15 2.00mm single row
+0
+15
+15
+Connector_PinSocket_2.00mm
+PinSocket_1x15_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x15, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x15 2.00mm single row style1 pin1 left
+0
+15
+15
+Connector_PinSocket_2.00mm
+PinSocket_1x15_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x15, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x15 2.00mm single row style2 pin1 right
+0
+15
+15
+Connector_PinSocket_2.00mm
+PinSocket_1x16_P2.00mm_Horizontal
+Through hole angled socket strip, 1x16, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x16 2.00mm single row
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_1x16_P2.00mm_Vertical
+Through hole straight socket strip, 1x16, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x16 2.00mm single row
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_1x16_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x16, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x16 2.00mm single row style1 pin1 left
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_1x16_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x16, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x16 2.00mm single row style2 pin1 right
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_1x17_P2.00mm_Horizontal
+Through hole angled socket strip, 1x17, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x17 2.00mm single row
+0
+17
+17
+Connector_PinSocket_2.00mm
+PinSocket_1x17_P2.00mm_Vertical
+Through hole straight socket strip, 1x17, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x17 2.00mm single row
+0
+17
+17
+Connector_PinSocket_2.00mm
+PinSocket_1x17_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x17, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x17 2.00mm single row style1 pin1 left
+0
+17
+17
+Connector_PinSocket_2.00mm
+PinSocket_1x17_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x17, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x17 2.00mm single row style2 pin1 right
+0
+17
+17
+Connector_PinSocket_2.00mm
+PinSocket_1x18_P2.00mm_Horizontal
+Through hole angled socket strip, 1x18, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x18 2.00mm single row
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_1x18_P2.00mm_Vertical
+Through hole straight socket strip, 1x18, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x18 2.00mm single row
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_1x18_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x18, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x18 2.00mm single row style1 pin1 left
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_1x18_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x18, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x18 2.00mm single row style2 pin1 right
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_1x19_P2.00mm_Horizontal
+Through hole angled socket strip, 1x19, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x19 2.00mm single row
+0
+19
+19
+Connector_PinSocket_2.00mm
+PinSocket_1x19_P2.00mm_Vertical
+Through hole straight socket strip, 1x19, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x19 2.00mm single row
+0
+19
+19
+Connector_PinSocket_2.00mm
+PinSocket_1x19_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x19, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x19 2.00mm single row style1 pin1 left
+0
+19
+19
+Connector_PinSocket_2.00mm
+PinSocket_1x19_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x19, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x19 2.00mm single row style2 pin1 right
+0
+19
+19
+Connector_PinSocket_2.00mm
+PinSocket_1x20_P2.00mm_Horizontal
+Through hole angled socket strip, 1x20, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x20 2.00mm single row
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_1x20_P2.00mm_Vertical
+Through hole straight socket strip, 1x20, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x20 2.00mm single row
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_1x20_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x20, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x20 2.00mm single row style1 pin1 left
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_1x20_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x20, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x20 2.00mm single row style2 pin1 right
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_1x21_P2.00mm_Horizontal
+Through hole angled socket strip, 1x21, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x21 2.00mm single row
+0
+21
+21
+Connector_PinSocket_2.00mm
+PinSocket_1x21_P2.00mm_Vertical
+Through hole straight socket strip, 1x21, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x21 2.00mm single row
+0
+21
+21
+Connector_PinSocket_2.00mm
+PinSocket_1x21_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x21, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x21 2.00mm single row style1 pin1 left
+0
+21
+21
+Connector_PinSocket_2.00mm
+PinSocket_1x21_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x21, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x21 2.00mm single row style2 pin1 right
+0
+21
+21
+Connector_PinSocket_2.00mm
+PinSocket_1x22_P2.00mm_Horizontal
+Through hole angled socket strip, 1x22, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x22 2.00mm single row
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_1x22_P2.00mm_Vertical
+Through hole straight socket strip, 1x22, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x22 2.00mm single row
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_1x22_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x22, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x22 2.00mm single row style1 pin1 left
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_1x22_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x22, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x22 2.00mm single row style2 pin1 right
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_1x23_P2.00mm_Horizontal
+Through hole angled socket strip, 1x23, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x23 2.00mm single row
+0
+23
+23
+Connector_PinSocket_2.00mm
+PinSocket_1x23_P2.00mm_Vertical
+Through hole straight socket strip, 1x23, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x23 2.00mm single row
+0
+23
+23
+Connector_PinSocket_2.00mm
+PinSocket_1x23_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x23, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x23 2.00mm single row style1 pin1 left
+0
+23
+23
+Connector_PinSocket_2.00mm
+PinSocket_1x23_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x23, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x23 2.00mm single row style2 pin1 right
+0
+23
+23
+Connector_PinSocket_2.00mm
+PinSocket_1x24_P2.00mm_Horizontal
+Through hole angled socket strip, 1x24, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x24 2.00mm single row
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_1x24_P2.00mm_Vertical
+Through hole straight socket strip, 1x24, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x24 2.00mm single row
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_1x24_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x24, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x24 2.00mm single row style1 pin1 left
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_1x24_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x24, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x24 2.00mm single row style2 pin1 right
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_1x25_P2.00mm_Horizontal
+Through hole angled socket strip, 1x25, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x25 2.00mm single row
+0
+25
+25
+Connector_PinSocket_2.00mm
+PinSocket_1x25_P2.00mm_Vertical
+Through hole straight socket strip, 1x25, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x25 2.00mm single row
+0
+25
+25
+Connector_PinSocket_2.00mm
+PinSocket_1x25_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x25, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x25 2.00mm single row style1 pin1 left
+0
+25
+25
+Connector_PinSocket_2.00mm
+PinSocket_1x25_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x25, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x25 2.00mm single row style2 pin1 right
+0
+25
+25
+Connector_PinSocket_2.00mm
+PinSocket_1x26_P2.00mm_Horizontal
+Through hole angled socket strip, 1x26, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x26 2.00mm single row
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_1x26_P2.00mm_Vertical
+Through hole straight socket strip, 1x26, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x26 2.00mm single row
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_1x26_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x26, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x26 2.00mm single row style1 pin1 left
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_1x26_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x26, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x26 2.00mm single row style2 pin1 right
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_1x27_P2.00mm_Horizontal
+Through hole angled socket strip, 1x27, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x27 2.00mm single row
+0
+27
+27
+Connector_PinSocket_2.00mm
+PinSocket_1x27_P2.00mm_Vertical
+Through hole straight socket strip, 1x27, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x27 2.00mm single row
+0
+27
+27
+Connector_PinSocket_2.00mm
+PinSocket_1x27_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x27, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x27 2.00mm single row style1 pin1 left
+0
+27
+27
+Connector_PinSocket_2.00mm
+PinSocket_1x27_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x27, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x27 2.00mm single row style2 pin1 right
+0
+27
+27
+Connector_PinSocket_2.00mm
+PinSocket_1x28_P2.00mm_Horizontal
+Through hole angled socket strip, 1x28, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x28 2.00mm single row
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_1x28_P2.00mm_Vertical
+Through hole straight socket strip, 1x28, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x28 2.00mm single row
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_1x28_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x28, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x28 2.00mm single row style1 pin1 left
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_1x28_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x28, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x28 2.00mm single row style2 pin1 right
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_1x29_P2.00mm_Horizontal
+Through hole angled socket strip, 1x29, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x29 2.00mm single row
+0
+29
+29
+Connector_PinSocket_2.00mm
+PinSocket_1x29_P2.00mm_Vertical
+Through hole straight socket strip, 1x29, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x29 2.00mm single row
+0
+29
+29
+Connector_PinSocket_2.00mm
+PinSocket_1x29_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x29, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x29 2.00mm single row style1 pin1 left
+0
+29
+29
+Connector_PinSocket_2.00mm
+PinSocket_1x29_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x29, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x29 2.00mm single row style2 pin1 right
+0
+29
+29
+Connector_PinSocket_2.00mm
+PinSocket_1x30_P2.00mm_Horizontal
+Through hole angled socket strip, 1x30, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x30 2.00mm single row
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_1x30_P2.00mm_Vertical
+Through hole straight socket strip, 1x30, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x30 2.00mm single row
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_1x30_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x30, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x30 2.00mm single row style1 pin1 left
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_1x30_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x30, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x30 2.00mm single row style2 pin1 right
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_1x31_P2.00mm_Horizontal
+Through hole angled socket strip, 1x31, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x31 2.00mm single row
+0
+31
+31
+Connector_PinSocket_2.00mm
+PinSocket_1x31_P2.00mm_Vertical
+Through hole straight socket strip, 1x31, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x31 2.00mm single row
+0
+31
+31
+Connector_PinSocket_2.00mm
+PinSocket_1x31_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x31, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x31 2.00mm single row style1 pin1 left
+0
+31
+31
+Connector_PinSocket_2.00mm
+PinSocket_1x31_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x31, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x31 2.00mm single row style2 pin1 right
+0
+31
+31
+Connector_PinSocket_2.00mm
+PinSocket_1x32_P2.00mm_Horizontal
+Through hole angled socket strip, 1x32, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x32 2.00mm single row
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_1x32_P2.00mm_Vertical
+Through hole straight socket strip, 1x32, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x32 2.00mm single row
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_1x32_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x32, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x32 2.00mm single row style1 pin1 left
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_1x32_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x32, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x32 2.00mm single row style2 pin1 right
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_1x33_P2.00mm_Horizontal
+Through hole angled socket strip, 1x33, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x33 2.00mm single row
+0
+33
+33
+Connector_PinSocket_2.00mm
+PinSocket_1x33_P2.00mm_Vertical
+Through hole straight socket strip, 1x33, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x33 2.00mm single row
+0
+33
+33
+Connector_PinSocket_2.00mm
+PinSocket_1x33_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x33, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x33 2.00mm single row style1 pin1 left
+0
+33
+33
+Connector_PinSocket_2.00mm
+PinSocket_1x33_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x33, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x33 2.00mm single row style2 pin1 right
+0
+33
+33
+Connector_PinSocket_2.00mm
+PinSocket_1x34_P2.00mm_Horizontal
+Through hole angled socket strip, 1x34, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x34 2.00mm single row
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_1x34_P2.00mm_Vertical
+Through hole straight socket strip, 1x34, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x34 2.00mm single row
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_1x34_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x34, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x34 2.00mm single row style1 pin1 left
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_1x34_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x34, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x34 2.00mm single row style2 pin1 right
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_1x35_P2.00mm_Horizontal
+Through hole angled socket strip, 1x35, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x35 2.00mm single row
+0
+35
+35
+Connector_PinSocket_2.00mm
+PinSocket_1x35_P2.00mm_Vertical
+Through hole straight socket strip, 1x35, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x35 2.00mm single row
+0
+35
+35
+Connector_PinSocket_2.00mm
+PinSocket_1x35_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x35, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x35 2.00mm single row style1 pin1 left
+0
+35
+35
+Connector_PinSocket_2.00mm
+PinSocket_1x35_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x35, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x35 2.00mm single row style2 pin1 right
+0
+35
+35
+Connector_PinSocket_2.00mm
+PinSocket_1x36_P2.00mm_Horizontal
+Through hole angled socket strip, 1x36, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x36 2.00mm single row
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_1x36_P2.00mm_Vertical
+Through hole straight socket strip, 1x36, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x36 2.00mm single row
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_1x36_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x36, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x36 2.00mm single row style1 pin1 left
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_1x36_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x36, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x36 2.00mm single row style2 pin1 right
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_1x37_P2.00mm_Horizontal
+Through hole angled socket strip, 1x37, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x37 2.00mm single row
+0
+37
+37
+Connector_PinSocket_2.00mm
+PinSocket_1x37_P2.00mm_Vertical
+Through hole straight socket strip, 1x37, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x37 2.00mm single row
+0
+37
+37
+Connector_PinSocket_2.00mm
+PinSocket_1x37_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x37, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x37 2.00mm single row style1 pin1 left
+0
+37
+37
+Connector_PinSocket_2.00mm
+PinSocket_1x37_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x37, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x37 2.00mm single row style2 pin1 right
+0
+37
+37
+Connector_PinSocket_2.00mm
+PinSocket_1x38_P2.00mm_Horizontal
+Through hole angled socket strip, 1x38, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x38 2.00mm single row
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_1x38_P2.00mm_Vertical
+Through hole straight socket strip, 1x38, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x38 2.00mm single row
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_1x38_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x38, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x38 2.00mm single row style1 pin1 left
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_1x38_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x38, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x38 2.00mm single row style2 pin1 right
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_1x39_P2.00mm_Horizontal
+Through hole angled socket strip, 1x39, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x39 2.00mm single row
+0
+39
+39
+Connector_PinSocket_2.00mm
+PinSocket_1x39_P2.00mm_Vertical
+Through hole straight socket strip, 1x39, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x39 2.00mm single row
+0
+39
+39
+Connector_PinSocket_2.00mm
+PinSocket_1x39_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x39, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x39 2.00mm single row style1 pin1 left
+0
+39
+39
+Connector_PinSocket_2.00mm
+PinSocket_1x39_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x39, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x39 2.00mm single row style2 pin1 right
+0
+39
+39
+Connector_PinSocket_2.00mm
+PinSocket_1x40_P2.00mm_Horizontal
+Through hole angled socket strip, 1x40, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x40 2.00mm single row
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_1x40_P2.00mm_Vertical
+Through hole straight socket strip, 1x40, 2.00mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x40 2.00mm single row
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_1x40_P2.00mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x40, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x40 2.00mm single row style1 pin1 left
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_1x40_P2.00mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x40, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated
+Surface mounted socket strip SMD 1x40 2.00mm single row style2 pin1 right
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_2x01_P2.00mm_Horizontal
+Through hole angled socket strip, 2x01, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x01 2.00mm double row
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_2x01_P2.00mm_Vertical
+Through hole straight socket strip, 2x01, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x01 2.00mm double row
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_2x01_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x01, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x01 2.00mm double row
+0
+2
+2
+Connector_PinSocket_2.00mm
+PinSocket_2x02_P2.00mm_Horizontal
+Through hole angled socket strip, 2x02, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x02 2.00mm double row
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_2x02_P2.00mm_Vertical
+Through hole straight socket strip, 2x02, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x02 2.00mm double row
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_2x02_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x02, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x02 2.00mm double row
+0
+4
+4
+Connector_PinSocket_2.00mm
+PinSocket_2x03_P2.00mm_Horizontal
+Through hole angled socket strip, 2x03, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x03 2.00mm double row
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_2x03_P2.00mm_Vertical
+Through hole straight socket strip, 2x03, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x03 2.00mm double row
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_2x03_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x03, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x03 2.00mm double row
+0
+6
+6
+Connector_PinSocket_2.00mm
+PinSocket_2x04_P2.00mm_Horizontal
+Through hole angled socket strip, 2x04, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x04 2.00mm double row
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_2x04_P2.00mm_Vertical
+Through hole straight socket strip, 2x04, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x04 2.00mm double row
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_2x04_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x04, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x04 2.00mm double row
+0
+8
+8
+Connector_PinSocket_2.00mm
+PinSocket_2x05_P2.00mm_Horizontal
+Through hole angled socket strip, 2x05, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x05 2.00mm double row
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_2x05_P2.00mm_Vertical
+Through hole straight socket strip, 2x05, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x05 2.00mm double row
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_2x05_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x05, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x05 2.00mm double row
+0
+10
+10
+Connector_PinSocket_2.00mm
+PinSocket_2x06_P2.00mm_Horizontal
+Through hole angled socket strip, 2x06, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x06 2.00mm double row
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_2x06_P2.00mm_Vertical
+Through hole straight socket strip, 2x06, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x06 2.00mm double row
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_2x06_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x06, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x06 2.00mm double row
+0
+12
+12
+Connector_PinSocket_2.00mm
+PinSocket_2x07_P2.00mm_Horizontal
+Through hole angled socket strip, 2x07, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x07 2.00mm double row
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_2x07_P2.00mm_Vertical
+Through hole straight socket strip, 2x07, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x07 2.00mm double row
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_2x07_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x07, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x07 2.00mm double row
+0
+14
+14
+Connector_PinSocket_2.00mm
+PinSocket_2x08_P2.00mm_Horizontal
+Through hole angled socket strip, 2x08, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x08 2.00mm double row
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_2x08_P2.00mm_Vertical
+Through hole straight socket strip, 2x08, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x08 2.00mm double row
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_2x08_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x08, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x08 2.00mm double row
+0
+16
+16
+Connector_PinSocket_2.00mm
+PinSocket_2x09_P2.00mm_Horizontal
+Through hole angled socket strip, 2x09, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x09 2.00mm double row
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_2x09_P2.00mm_Vertical
+Through hole straight socket strip, 2x09, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x09 2.00mm double row
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_2x09_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x09, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x09 2.00mm double row
+0
+18
+18
+Connector_PinSocket_2.00mm
+PinSocket_2x10_P2.00mm_Horizontal
+Through hole angled socket strip, 2x10, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x10 2.00mm double row
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_2x10_P2.00mm_Vertical
+Through hole straight socket strip, 2x10, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x10 2.00mm double row
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_2x10_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x10, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x10 2.00mm double row
+0
+20
+20
+Connector_PinSocket_2.00mm
+PinSocket_2x11_P2.00mm_Horizontal
+Through hole angled socket strip, 2x11, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x11 2.00mm double row
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_2x11_P2.00mm_Vertical
+Through hole straight socket strip, 2x11, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x11 2.00mm double row
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_2x11_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x11, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x11 2.00mm double row
+0
+22
+22
+Connector_PinSocket_2.00mm
+PinSocket_2x12_P2.00mm_Horizontal
+Through hole angled socket strip, 2x12, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x12 2.00mm double row
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_2x12_P2.00mm_Vertical
+Through hole straight socket strip, 2x12, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x12 2.00mm double row
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_2x12_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x12, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x12 2.00mm double row
+0
+24
+24
+Connector_PinSocket_2.00mm
+PinSocket_2x13_P2.00mm_Horizontal
+Through hole angled socket strip, 2x13, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x13 2.00mm double row
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_2x13_P2.00mm_Vertical
+Through hole straight socket strip, 2x13, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x13 2.00mm double row
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_2x13_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x13, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x13 2.00mm double row
+0
+26
+26
+Connector_PinSocket_2.00mm
+PinSocket_2x14_P2.00mm_Horizontal
+Through hole angled socket strip, 2x14, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x14 2.00mm double row
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_2x14_P2.00mm_Vertical
+Through hole straight socket strip, 2x14, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x14 2.00mm double row
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_2x14_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x14, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x14 2.00mm double row
+0
+28
+28
+Connector_PinSocket_2.00mm
+PinSocket_2x15_P2.00mm_Horizontal
+Through hole angled socket strip, 2x15, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x15 2.00mm double row
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_2x15_P2.00mm_Vertical
+Through hole straight socket strip, 2x15, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x15 2.00mm double row
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_2x15_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x15, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x15 2.00mm double row
+0
+30
+30
+Connector_PinSocket_2.00mm
+PinSocket_2x16_P2.00mm_Horizontal
+Through hole angled socket strip, 2x16, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x16 2.00mm double row
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_2x16_P2.00mm_Vertical
+Through hole straight socket strip, 2x16, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x16 2.00mm double row
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_2x16_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x16, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x16 2.00mm double row
+0
+32
+32
+Connector_PinSocket_2.00mm
+PinSocket_2x17_P2.00mm_Horizontal
+Through hole angled socket strip, 2x17, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x17 2.00mm double row
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_2x17_P2.00mm_Vertical
+Through hole straight socket strip, 2x17, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x17 2.00mm double row
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_2x17_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x17, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x17 2.00mm double row
+0
+34
+34
+Connector_PinSocket_2.00mm
+PinSocket_2x18_P2.00mm_Horizontal
+Through hole angled socket strip, 2x18, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x18 2.00mm double row
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_2x18_P2.00mm_Vertical
+Through hole straight socket strip, 2x18, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x18 2.00mm double row
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_2x18_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x18, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x18 2.00mm double row
+0
+36
+36
+Connector_PinSocket_2.00mm
+PinSocket_2x19_P2.00mm_Horizontal
+Through hole angled socket strip, 2x19, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x19 2.00mm double row
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_2x19_P2.00mm_Vertical
+Through hole straight socket strip, 2x19, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x19 2.00mm double row
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_2x19_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x19, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x19 2.00mm double row
+0
+38
+38
+Connector_PinSocket_2.00mm
+PinSocket_2x20_P2.00mm_Horizontal
+Through hole angled socket strip, 2x20, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x20 2.00mm double row
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_2x20_P2.00mm_Vertical
+Through hole straight socket strip, 2x20, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x20 2.00mm double row
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_2x20_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x20, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x20 2.00mm double row
+0
+40
+40
+Connector_PinSocket_2.00mm
+PinSocket_2x21_P2.00mm_Horizontal
+Through hole angled socket strip, 2x21, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x21 2.00mm double row
+0
+42
+42
+Connector_PinSocket_2.00mm
+PinSocket_2x21_P2.00mm_Vertical
+Through hole straight socket strip, 2x21, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x21 2.00mm double row
+0
+42
+42
+Connector_PinSocket_2.00mm
+PinSocket_2x21_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x21, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x21 2.00mm double row
+0
+42
+42
+Connector_PinSocket_2.00mm
+PinSocket_2x22_P2.00mm_Horizontal
+Through hole angled socket strip, 2x22, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x22 2.00mm double row
+0
+44
+44
+Connector_PinSocket_2.00mm
+PinSocket_2x22_P2.00mm_Vertical
+Through hole straight socket strip, 2x22, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x22 2.00mm double row
+0
+44
+44
+Connector_PinSocket_2.00mm
+PinSocket_2x22_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x22, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x22 2.00mm double row
+0
+44
+44
+Connector_PinSocket_2.00mm
+PinSocket_2x23_P2.00mm_Horizontal
+Through hole angled socket strip, 2x23, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x23 2.00mm double row
+0
+46
+46
+Connector_PinSocket_2.00mm
+PinSocket_2x23_P2.00mm_Vertical
+Through hole straight socket strip, 2x23, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x23 2.00mm double row
+0
+46
+46
+Connector_PinSocket_2.00mm
+PinSocket_2x23_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x23, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x23 2.00mm double row
+0
+46
+46
+Connector_PinSocket_2.00mm
+PinSocket_2x24_P2.00mm_Horizontal
+Through hole angled socket strip, 2x24, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x24 2.00mm double row
+0
+48
+48
+Connector_PinSocket_2.00mm
+PinSocket_2x24_P2.00mm_Vertical
+Through hole straight socket strip, 2x24, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x24 2.00mm double row
+0
+48
+48
+Connector_PinSocket_2.00mm
+PinSocket_2x24_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x24, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x24 2.00mm double row
+0
+48
+48
+Connector_PinSocket_2.00mm
+PinSocket_2x25_P2.00mm_Horizontal
+Through hole angled socket strip, 2x25, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x25 2.00mm double row
+0
+50
+50
+Connector_PinSocket_2.00mm
+PinSocket_2x25_P2.00mm_Vertical
+Through hole straight socket strip, 2x25, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x25 2.00mm double row
+0
+50
+50
+Connector_PinSocket_2.00mm
+PinSocket_2x25_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x25, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x25 2.00mm double row
+0
+50
+50
+Connector_PinSocket_2.00mm
+PinSocket_2x26_P2.00mm_Horizontal
+Through hole angled socket strip, 2x26, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x26 2.00mm double row
+0
+52
+52
+Connector_PinSocket_2.00mm
+PinSocket_2x26_P2.00mm_Vertical
+Through hole straight socket strip, 2x26, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x26 2.00mm double row
+0
+52
+52
+Connector_PinSocket_2.00mm
+PinSocket_2x26_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x26, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x26 2.00mm double row
+0
+52
+52
+Connector_PinSocket_2.00mm
+PinSocket_2x27_P2.00mm_Horizontal
+Through hole angled socket strip, 2x27, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x27 2.00mm double row
+0
+54
+54
+Connector_PinSocket_2.00mm
+PinSocket_2x27_P2.00mm_Vertical
+Through hole straight socket strip, 2x27, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x27 2.00mm double row
+0
+54
+54
+Connector_PinSocket_2.00mm
+PinSocket_2x27_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x27, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x27 2.00mm double row
+0
+54
+54
+Connector_PinSocket_2.00mm
+PinSocket_2x28_P2.00mm_Horizontal
+Through hole angled socket strip, 2x28, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x28 2.00mm double row
+0
+56
+56
+Connector_PinSocket_2.00mm
+PinSocket_2x28_P2.00mm_Vertical
+Through hole straight socket strip, 2x28, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x28 2.00mm double row
+0
+56
+56
+Connector_PinSocket_2.00mm
+PinSocket_2x28_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x28, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x28 2.00mm double row
+0
+56
+56
+Connector_PinSocket_2.00mm
+PinSocket_2x29_P2.00mm_Horizontal
+Through hole angled socket strip, 2x29, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x29 2.00mm double row
+0
+58
+58
+Connector_PinSocket_2.00mm
+PinSocket_2x29_P2.00mm_Vertical
+Through hole straight socket strip, 2x29, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x29 2.00mm double row
+0
+58
+58
+Connector_PinSocket_2.00mm
+PinSocket_2x29_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x29, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x29 2.00mm double row
+0
+58
+58
+Connector_PinSocket_2.00mm
+PinSocket_2x30_P2.00mm_Horizontal
+Through hole angled socket strip, 2x30, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x30 2.00mm double row
+0
+60
+60
+Connector_PinSocket_2.00mm
+PinSocket_2x30_P2.00mm_Vertical
+Through hole straight socket strip, 2x30, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x30 2.00mm double row
+0
+60
+60
+Connector_PinSocket_2.00mm
+PinSocket_2x30_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x30, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x30 2.00mm double row
+0
+60
+60
+Connector_PinSocket_2.00mm
+PinSocket_2x31_P2.00mm_Horizontal
+Through hole angled socket strip, 2x31, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x31 2.00mm double row
+0
+62
+62
+Connector_PinSocket_2.00mm
+PinSocket_2x31_P2.00mm_Vertical
+Through hole straight socket strip, 2x31, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x31 2.00mm double row
+0
+62
+62
+Connector_PinSocket_2.00mm
+PinSocket_2x31_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x31, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x31 2.00mm double row
+0
+62
+62
+Connector_PinSocket_2.00mm
+PinSocket_2x32_P2.00mm_Horizontal
+Through hole angled socket strip, 2x32, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x32 2.00mm double row
+0
+64
+64
+Connector_PinSocket_2.00mm
+PinSocket_2x32_P2.00mm_Vertical
+Through hole straight socket strip, 2x32, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x32 2.00mm double row
+0
+64
+64
+Connector_PinSocket_2.00mm
+PinSocket_2x32_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x32, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x32 2.00mm double row
+0
+64
+64
+Connector_PinSocket_2.00mm
+PinSocket_2x33_P2.00mm_Horizontal
+Through hole angled socket strip, 2x33, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x33 2.00mm double row
+0
+66
+66
+Connector_PinSocket_2.00mm
+PinSocket_2x33_P2.00mm_Vertical
+Through hole straight socket strip, 2x33, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x33 2.00mm double row
+0
+66
+66
+Connector_PinSocket_2.00mm
+PinSocket_2x33_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x33, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x33 2.00mm double row
+0
+66
+66
+Connector_PinSocket_2.00mm
+PinSocket_2x34_P2.00mm_Horizontal
+Through hole angled socket strip, 2x34, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x34 2.00mm double row
+0
+68
+68
+Connector_PinSocket_2.00mm
+PinSocket_2x34_P2.00mm_Vertical
+Through hole straight socket strip, 2x34, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x34 2.00mm double row
+0
+68
+68
+Connector_PinSocket_2.00mm
+PinSocket_2x34_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x34, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x34 2.00mm double row
+0
+68
+68
+Connector_PinSocket_2.00mm
+PinSocket_2x35_P2.00mm_Horizontal
+Through hole angled socket strip, 2x35, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x35 2.00mm double row
+0
+70
+70
+Connector_PinSocket_2.00mm
+PinSocket_2x35_P2.00mm_Vertical
+Through hole straight socket strip, 2x35, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x35 2.00mm double row
+0
+70
+70
+Connector_PinSocket_2.00mm
+PinSocket_2x35_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x35, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x35 2.00mm double row
+0
+70
+70
+Connector_PinSocket_2.00mm
+PinSocket_2x36_P2.00mm_Horizontal
+Through hole angled socket strip, 2x36, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x36 2.00mm double row
+0
+72
+72
+Connector_PinSocket_2.00mm
+PinSocket_2x36_P2.00mm_Vertical
+Through hole straight socket strip, 2x36, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x36 2.00mm double row
+0
+72
+72
+Connector_PinSocket_2.00mm
+PinSocket_2x36_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x36, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x36 2.00mm double row
+0
+72
+72
+Connector_PinSocket_2.00mm
+PinSocket_2x37_P2.00mm_Horizontal
+Through hole angled socket strip, 2x37, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x37 2.00mm double row
+0
+74
+74
+Connector_PinSocket_2.00mm
+PinSocket_2x37_P2.00mm_Vertical
+Through hole straight socket strip, 2x37, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x37 2.00mm double row
+0
+74
+74
+Connector_PinSocket_2.00mm
+PinSocket_2x37_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x37, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x37 2.00mm double row
+0
+74
+74
+Connector_PinSocket_2.00mm
+PinSocket_2x38_P2.00mm_Horizontal
+Through hole angled socket strip, 2x38, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x38 2.00mm double row
+0
+76
+76
+Connector_PinSocket_2.00mm
+PinSocket_2x38_P2.00mm_Vertical
+Through hole straight socket strip, 2x38, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x38 2.00mm double row
+0
+76
+76
+Connector_PinSocket_2.00mm
+PinSocket_2x38_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x38, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x38 2.00mm double row
+0
+76
+76
+Connector_PinSocket_2.00mm
+PinSocket_2x39_P2.00mm_Horizontal
+Through hole angled socket strip, 2x39, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x39 2.00mm double row
+0
+78
+78
+Connector_PinSocket_2.00mm
+PinSocket_2x39_P2.00mm_Vertical
+Through hole straight socket strip, 2x39, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x39 2.00mm double row
+0
+78
+78
+Connector_PinSocket_2.00mm
+PinSocket_2x39_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x39, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x39 2.00mm double row
+0
+78
+78
+Connector_PinSocket_2.00mm
+PinSocket_2x40_P2.00mm_Horizontal
+Through hole angled socket strip, 2x40, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x40 2.00mm double row
+0
+80
+80
+Connector_PinSocket_2.00mm
+PinSocket_2x40_P2.00mm_Vertical
+Through hole straight socket strip, 2x40, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x40 2.00mm double row
+0
+80
+80
+Connector_PinSocket_2.00mm
+PinSocket_2x40_P2.00mm_Vertical_SMD
+surface-mounted straight socket strip, 2x40, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x40 2.00mm double row
+0
+80
+80
+Connector_PinSocket_2.54mm
+PinSocket_1x01_P2.54mm_Horizontal
+Through hole angled socket strip, 1x01, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x01 2.54mm single row
+0
+1
+1
+Connector_PinSocket_2.54mm
+PinSocket_1x01_P2.54mm_Vertical
+Through hole straight socket strip, 1x01, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x01 2.54mm single row
+0
+1
+1
+Connector_PinSocket_2.54mm
+PinSocket_1x02_P2.54mm_Horizontal
+Through hole angled socket strip, 1x02, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x02 2.54mm single row
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_1x02_P2.54mm_Vertical
+Through hole straight socket strip, 1x02, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x02 2.54mm single row
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x02, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x02 2.54mm single row style1 pin1 left
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x02, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x02 2.54mm single row style2 pin1 right
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_1x03_P2.54mm_Horizontal
+Through hole angled socket strip, 1x03, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x03 2.54mm single row
+0
+3
+3
+Connector_PinSocket_2.54mm
+PinSocket_1x03_P2.54mm_Vertical
+Through hole straight socket strip, 1x03, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x03 2.54mm single row
+0
+3
+3
+Connector_PinSocket_2.54mm
+PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x03, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x03 2.54mm single row style1 pin1 left
+0
+3
+3
+Connector_PinSocket_2.54mm
+PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x03, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x03 2.54mm single row style2 pin1 right
+0
+3
+3
+Connector_PinSocket_2.54mm
+PinSocket_1x04_P2.54mm_Horizontal
+Through hole angled socket strip, 1x04, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x04 2.54mm single row
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_1x04_P2.54mm_Vertical
+Through hole straight socket strip, 1x04, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x04 2.54mm single row
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x04, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x04 2.54mm single row style1 pin1 left
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x04, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x04 2.54mm single row style2 pin1 right
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_1x05_P2.54mm_Horizontal
+Through hole angled socket strip, 1x05, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x05 2.54mm single row
+0
+5
+5
+Connector_PinSocket_2.54mm
+PinSocket_1x05_P2.54mm_Vertical
+Through hole straight socket strip, 1x05, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x05 2.54mm single row
+0
+5
+5
+Connector_PinSocket_2.54mm
+PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x05, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x05 2.54mm single row style1 pin1 left
+0
+5
+5
+Connector_PinSocket_2.54mm
+PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x05, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x05 2.54mm single row style2 pin1 right
+0
+5
+5
+Connector_PinSocket_2.54mm
+PinSocket_1x06_P2.54mm_Horizontal
+Through hole angled socket strip, 1x06, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x06 2.54mm single row
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_1x06_P2.54mm_Vertical
+Through hole straight socket strip, 1x06, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x06 2.54mm single row
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x06, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x06 2.54mm single row style1 pin1 left
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x06, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x06 2.54mm single row style2 pin1 right
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_1x07_P2.54mm_Horizontal
+Through hole angled socket strip, 1x07, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x07 2.54mm single row
+0
+7
+7
+Connector_PinSocket_2.54mm
+PinSocket_1x07_P2.54mm_Vertical
+Through hole straight socket strip, 1x07, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x07 2.54mm single row
+0
+7
+7
+Connector_PinSocket_2.54mm
+PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x07, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x07 2.54mm single row style1 pin1 left
+0
+7
+7
+Connector_PinSocket_2.54mm
+PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x07, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x07 2.54mm single row style2 pin1 right
+0
+7
+7
+Connector_PinSocket_2.54mm
+PinSocket_1x08_P2.54mm_Horizontal
+Through hole angled socket strip, 1x08, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x08 2.54mm single row
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_1x08_P2.54mm_Vertical
+Through hole straight socket strip, 1x08, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x08 2.54mm single row
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x08, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x08 2.54mm single row style1 pin1 left
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x08, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x08 2.54mm single row style2 pin1 right
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_1x09_P2.54mm_Horizontal
+Through hole angled socket strip, 1x09, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x09 2.54mm single row
+0
+9
+9
+Connector_PinSocket_2.54mm
+PinSocket_1x09_P2.54mm_Vertical
+Through hole straight socket strip, 1x09, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x09 2.54mm single row
+0
+9
+9
+Connector_PinSocket_2.54mm
+PinSocket_1x09_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x09, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x09 2.54mm single row style1 pin1 left
+0
+9
+9
+Connector_PinSocket_2.54mm
+PinSocket_1x09_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x09, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x09 2.54mm single row style2 pin1 right
+0
+9
+9
+Connector_PinSocket_2.54mm
+PinSocket_1x10_P2.54mm_Horizontal
+Through hole angled socket strip, 1x10, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x10 2.54mm single row
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_1x10_P2.54mm_Vertical
+Through hole straight socket strip, 1x10, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x10 2.54mm single row
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x10, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x10 2.54mm single row style1 pin1 left
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x10, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x10 2.54mm single row style2 pin1 right
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_1x11_P2.54mm_Horizontal
+Through hole angled socket strip, 1x11, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x11 2.54mm single row
+0
+11
+11
+Connector_PinSocket_2.54mm
+PinSocket_1x11_P2.54mm_Vertical
+Through hole straight socket strip, 1x11, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x11 2.54mm single row
+0
+11
+11
+Connector_PinSocket_2.54mm
+PinSocket_1x11_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x11, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x11 2.54mm single row style1 pin1 left
+0
+11
+11
+Connector_PinSocket_2.54mm
+PinSocket_1x11_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x11, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x11 2.54mm single row style2 pin1 right
+0
+11
+11
+Connector_PinSocket_2.54mm
+PinSocket_1x12_P2.54mm_Horizontal
+Through hole angled socket strip, 1x12, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x12 2.54mm single row
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_1x12_P2.54mm_Vertical
+Through hole straight socket strip, 1x12, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x12 2.54mm single row
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_1x12_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x12, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x12 2.54mm single row style1 pin1 left
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_1x12_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x12, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x12 2.54mm single row style2 pin1 right
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_1x13_P2.54mm_Horizontal
+Through hole angled socket strip, 1x13, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x13 2.54mm single row
+0
+13
+13
+Connector_PinSocket_2.54mm
+PinSocket_1x13_P2.54mm_Vertical
+Through hole straight socket strip, 1x13, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x13 2.54mm single row
+0
+13
+13
+Connector_PinSocket_2.54mm
+PinSocket_1x13_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x13, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x13 2.54mm single row style1 pin1 left
+0
+13
+13
+Connector_PinSocket_2.54mm
+PinSocket_1x13_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x13, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x13 2.54mm single row style2 pin1 right
+0
+13
+13
+Connector_PinSocket_2.54mm
+PinSocket_1x14_P2.54mm_Horizontal
+Through hole angled socket strip, 1x14, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x14 2.54mm single row
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_1x14_P2.54mm_Vertical
+Through hole straight socket strip, 1x14, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x14 2.54mm single row
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_1x14_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x14, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x14 2.54mm single row style1 pin1 left
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_1x14_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x14, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x14 2.54mm single row style2 pin1 right
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_1x15_P2.54mm_Horizontal
+Through hole angled socket strip, 1x15, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x15 2.54mm single row
+0
+15
+15
+Connector_PinSocket_2.54mm
+PinSocket_1x15_P2.54mm_Vertical
+Through hole straight socket strip, 1x15, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x15 2.54mm single row
+0
+15
+15
+Connector_PinSocket_2.54mm
+PinSocket_1x15_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x15, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x15 2.54mm single row style1 pin1 left
+0
+15
+15
+Connector_PinSocket_2.54mm
+PinSocket_1x15_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x15, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x15 2.54mm single row style2 pin1 right
+0
+15
+15
+Connector_PinSocket_2.54mm
+PinSocket_1x16_P2.54mm_Horizontal
+Through hole angled socket strip, 1x16, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x16 2.54mm single row
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_1x16_P2.54mm_Vertical
+Through hole straight socket strip, 1x16, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x16 2.54mm single row
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_1x16_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x16, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x16 2.54mm single row style1 pin1 left
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_1x16_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x16, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x16 2.54mm single row style2 pin1 right
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_1x17_P2.54mm_Horizontal
+Through hole angled socket strip, 1x17, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x17 2.54mm single row
+0
+17
+17
+Connector_PinSocket_2.54mm
+PinSocket_1x17_P2.54mm_Vertical
+Through hole straight socket strip, 1x17, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x17 2.54mm single row
+0
+17
+17
+Connector_PinSocket_2.54mm
+PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x17, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x17 2.54mm single row style1 pin1 left
+0
+17
+17
+Connector_PinSocket_2.54mm
+PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x17, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x17 2.54mm single row style2 pin1 right
+0
+17
+17
+Connector_PinSocket_2.54mm
+PinSocket_1x18_P2.54mm_Horizontal
+Through hole angled socket strip, 1x18, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x18 2.54mm single row
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_1x18_P2.54mm_Vertical
+Through hole straight socket strip, 1x18, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x18 2.54mm single row
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_1x18_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x18, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x18 2.54mm single row style1 pin1 left
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_1x18_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x18, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x18 2.54mm single row style2 pin1 right
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_1x19_P2.54mm_Horizontal
+Through hole angled socket strip, 1x19, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x19 2.54mm single row
+0
+19
+19
+Connector_PinSocket_2.54mm
+PinSocket_1x19_P2.54mm_Vertical
+Through hole straight socket strip, 1x19, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x19 2.54mm single row
+0
+19
+19
+Connector_PinSocket_2.54mm
+PinSocket_1x19_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x19, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x19 2.54mm single row style1 pin1 left
+0
+19
+19
+Connector_PinSocket_2.54mm
+PinSocket_1x19_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x19, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x19 2.54mm single row style2 pin1 right
+0
+19
+19
+Connector_PinSocket_2.54mm
+PinSocket_1x20_P2.54mm_Horizontal
+Through hole angled socket strip, 1x20, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x20 2.54mm single row
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_1x20_P2.54mm_Vertical
+Through hole straight socket strip, 1x20, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x20 2.54mm single row
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_1x20_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x20, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x20 2.54mm single row style1 pin1 left
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_1x20_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x20, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x20 2.54mm single row style2 pin1 right
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_1x21_P2.54mm_Horizontal
+Through hole angled socket strip, 1x21, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x21 2.54mm single row
+0
+21
+21
+Connector_PinSocket_2.54mm
+PinSocket_1x21_P2.54mm_Vertical
+Through hole straight socket strip, 1x21, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x21 2.54mm single row
+0
+21
+21
+Connector_PinSocket_2.54mm
+PinSocket_1x21_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x21, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x21 2.54mm single row style1 pin1 left
+0
+21
+21
+Connector_PinSocket_2.54mm
+PinSocket_1x21_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x21, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x21 2.54mm single row style2 pin1 right
+0
+21
+21
+Connector_PinSocket_2.54mm
+PinSocket_1x22_P2.54mm_Horizontal
+Through hole angled socket strip, 1x22, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x22 2.54mm single row
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_1x22_P2.54mm_Vertical
+Through hole straight socket strip, 1x22, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x22 2.54mm single row
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x22, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x22 2.54mm single row style1 pin1 left
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x22, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x22 2.54mm single row style2 pin1 right
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_1x23_P2.54mm_Horizontal
+Through hole angled socket strip, 1x23, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x23 2.54mm single row
+0
+23
+23
+Connector_PinSocket_2.54mm
+PinSocket_1x23_P2.54mm_Vertical
+Through hole straight socket strip, 1x23, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x23 2.54mm single row
+0
+23
+23
+Connector_PinSocket_2.54mm
+PinSocket_1x23_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x23, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x23 2.54mm single row style1 pin1 left
+0
+23
+23
+Connector_PinSocket_2.54mm
+PinSocket_1x23_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x23, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x23 2.54mm single row style2 pin1 right
+0
+23
+23
+Connector_PinSocket_2.54mm
+PinSocket_1x24_P2.54mm_Horizontal
+Through hole angled socket strip, 1x24, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x24 2.54mm single row
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_1x24_P2.54mm_Vertical
+Through hole straight socket strip, 1x24, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x24 2.54mm single row
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x24, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x24 2.54mm single row style1 pin1 left
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x24, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x24 2.54mm single row style2 pin1 right
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_1x25_P2.54mm_Horizontal
+Through hole angled socket strip, 1x25, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x25 2.54mm single row
+0
+25
+25
+Connector_PinSocket_2.54mm
+PinSocket_1x25_P2.54mm_Vertical
+Through hole straight socket strip, 1x25, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x25 2.54mm single row
+0
+25
+25
+Connector_PinSocket_2.54mm
+PinSocket_1x25_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x25, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x25 2.54mm single row style1 pin1 left
+0
+25
+25
+Connector_PinSocket_2.54mm
+PinSocket_1x25_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x25, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x25 2.54mm single row style2 pin1 right
+0
+25
+25
+Connector_PinSocket_2.54mm
+PinSocket_1x26_P2.54mm_Horizontal
+Through hole angled socket strip, 1x26, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x26 2.54mm single row
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_1x26_P2.54mm_Vertical
+Through hole straight socket strip, 1x26, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x26 2.54mm single row
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_1x26_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x26, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x26 2.54mm single row style1 pin1 left
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_1x26_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x26, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x26 2.54mm single row style2 pin1 right
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_1x27_P2.54mm_Horizontal
+Through hole angled socket strip, 1x27, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x27 2.54mm single row
+0
+27
+27
+Connector_PinSocket_2.54mm
+PinSocket_1x27_P2.54mm_Vertical
+Through hole straight socket strip, 1x27, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x27 2.54mm single row
+0
+27
+27
+Connector_PinSocket_2.54mm
+PinSocket_1x27_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x27, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x27 2.54mm single row style1 pin1 left
+0
+27
+27
+Connector_PinSocket_2.54mm
+PinSocket_1x27_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x27, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x27 2.54mm single row style2 pin1 right
+0
+27
+27
+Connector_PinSocket_2.54mm
+PinSocket_1x28_P2.54mm_Horizontal
+Through hole angled socket strip, 1x28, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x28 2.54mm single row
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_1x28_P2.54mm_Vertical
+Through hole straight socket strip, 1x28, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x28 2.54mm single row
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_1x28_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x28, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x28 2.54mm single row style1 pin1 left
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_1x28_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x28, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x28 2.54mm single row style2 pin1 right
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_1x29_P2.54mm_Horizontal
+Through hole angled socket strip, 1x29, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x29 2.54mm single row
+0
+29
+29
+Connector_PinSocket_2.54mm
+PinSocket_1x29_P2.54mm_Vertical
+Through hole straight socket strip, 1x29, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x29 2.54mm single row
+0
+29
+29
+Connector_PinSocket_2.54mm
+PinSocket_1x29_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x29, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x29 2.54mm single row style1 pin1 left
+0
+29
+29
+Connector_PinSocket_2.54mm
+PinSocket_1x29_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x29, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x29 2.54mm single row style2 pin1 right
+0
+29
+29
+Connector_PinSocket_2.54mm
+PinSocket_1x30_P2.54mm_Horizontal
+Through hole angled socket strip, 1x30, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x30 2.54mm single row
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_1x30_P2.54mm_Vertical
+Through hole straight socket strip, 1x30, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x30 2.54mm single row
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_1x30_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x30, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x30 2.54mm single row style1 pin1 left
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_1x30_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x30, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x30 2.54mm single row style2 pin1 right
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_1x31_P2.54mm_Horizontal
+Through hole angled socket strip, 1x31, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x31 2.54mm single row
+0
+31
+31
+Connector_PinSocket_2.54mm
+PinSocket_1x31_P2.54mm_Vertical
+Through hole straight socket strip, 1x31, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x31 2.54mm single row
+0
+31
+31
+Connector_PinSocket_2.54mm
+PinSocket_1x31_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x31, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x31 2.54mm single row style1 pin1 left
+0
+31
+31
+Connector_PinSocket_2.54mm
+PinSocket_1x31_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x31, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x31 2.54mm single row style2 pin1 right
+0
+31
+31
+Connector_PinSocket_2.54mm
+PinSocket_1x32_P2.54mm_Horizontal
+Through hole angled socket strip, 1x32, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x32 2.54mm single row
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_1x32_P2.54mm_Vertical
+Through hole straight socket strip, 1x32, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x32 2.54mm single row
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_1x32_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x32, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x32 2.54mm single row style1 pin1 left
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_1x32_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x32, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x32 2.54mm single row style2 pin1 right
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_1x33_P2.54mm_Horizontal
+Through hole angled socket strip, 1x33, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x33 2.54mm single row
+0
+33
+33
+Connector_PinSocket_2.54mm
+PinSocket_1x33_P2.54mm_Vertical
+Through hole straight socket strip, 1x33, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x33 2.54mm single row
+0
+33
+33
+Connector_PinSocket_2.54mm
+PinSocket_1x33_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x33, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x33 2.54mm single row style1 pin1 left
+0
+33
+33
+Connector_PinSocket_2.54mm
+PinSocket_1x33_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x33, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x33 2.54mm single row style2 pin1 right
+0
+33
+33
+Connector_PinSocket_2.54mm
+PinSocket_1x34_P2.54mm_Horizontal
+Through hole angled socket strip, 1x34, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x34 2.54mm single row
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_1x34_P2.54mm_Vertical
+Through hole straight socket strip, 1x34, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x34 2.54mm single row
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_1x34_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x34, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x34 2.54mm single row style1 pin1 left
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_1x34_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x34, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x34 2.54mm single row style2 pin1 right
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_1x35_P2.54mm_Horizontal
+Through hole angled socket strip, 1x35, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x35 2.54mm single row
+0
+35
+35
+Connector_PinSocket_2.54mm
+PinSocket_1x35_P2.54mm_Vertical
+Through hole straight socket strip, 1x35, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x35 2.54mm single row
+0
+35
+35
+Connector_PinSocket_2.54mm
+PinSocket_1x35_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x35, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x35 2.54mm single row style1 pin1 left
+0
+35
+35
+Connector_PinSocket_2.54mm
+PinSocket_1x35_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x35, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x35 2.54mm single row style2 pin1 right
+0
+35
+35
+Connector_PinSocket_2.54mm
+PinSocket_1x36_P2.54mm_Horizontal
+Through hole angled socket strip, 1x36, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x36 2.54mm single row
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_1x36_P2.54mm_Vertical
+Through hole straight socket strip, 1x36, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x36 2.54mm single row
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_1x36_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x36, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x36 2.54mm single row style1 pin1 left
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_1x36_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x36, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x36 2.54mm single row style2 pin1 right
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_1x37_P2.54mm_Horizontal
+Through hole angled socket strip, 1x37, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x37 2.54mm single row
+0
+37
+37
+Connector_PinSocket_2.54mm
+PinSocket_1x37_P2.54mm_Vertical
+Through hole straight socket strip, 1x37, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x37 2.54mm single row
+0
+37
+37
+Connector_PinSocket_2.54mm
+PinSocket_1x37_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x37, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x37 2.54mm single row style1 pin1 left
+0
+37
+37
+Connector_PinSocket_2.54mm
+PinSocket_1x37_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x37, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x37 2.54mm single row style2 pin1 right
+0
+37
+37
+Connector_PinSocket_2.54mm
+PinSocket_1x38_P2.54mm_Horizontal
+Through hole angled socket strip, 1x38, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x38 2.54mm single row
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_1x38_P2.54mm_Vertical
+Through hole straight socket strip, 1x38, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x38 2.54mm single row
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_1x38_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x38, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x38 2.54mm single row style1 pin1 left
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_1x38_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x38, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x38 2.54mm single row style2 pin1 right
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_1x39_P2.54mm_Horizontal
+Through hole angled socket strip, 1x39, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x39 2.54mm single row
+0
+39
+39
+Connector_PinSocket_2.54mm
+PinSocket_1x39_P2.54mm_Vertical
+Through hole straight socket strip, 1x39, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x39 2.54mm single row
+0
+39
+39
+Connector_PinSocket_2.54mm
+PinSocket_1x39_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x39, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x39 2.54mm single row style1 pin1 left
+0
+39
+39
+Connector_PinSocket_2.54mm
+PinSocket_1x39_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x39, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x39 2.54mm single row style2 pin1 right
+0
+39
+39
+Connector_PinSocket_2.54mm
+PinSocket_1x40_P2.54mm_Horizontal
+Through hole angled socket strip, 1x40, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 1x40 2.54mm single row
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_1x40_P2.54mm_Vertical
+Through hole straight socket strip, 1x40, 2.54mm pitch, single row (from Kicad 4.0.7), script generated
+Through hole socket strip THT 1x40 2.54mm single row
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_1x40_P2.54mm_Vertical_SMD_Pin1Left
+surface-mounted straight socket strip, 1x40, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x40 2.54mm single row style1 pin1 left
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_1x40_P2.54mm_Vertical_SMD_Pin1Right
+surface-mounted straight socket strip, 1x40, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated
+Surface mounted socket strip SMD 1x40 2.54mm single row style2 pin1 right
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_2x01_P2.54mm_Horizontal
+Through hole angled socket strip, 2x01, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x01 2.54mm double row
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_2x01_P2.54mm_Vertical
+Through hole straight socket strip, 2x01, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x01 2.54mm double row
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_2x01_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x01, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x01 2.54mm double row
+0
+2
+2
+Connector_PinSocket_2.54mm
+PinSocket_2x02_P2.54mm_Horizontal
+Through hole angled socket strip, 2x02, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x02 2.54mm double row
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_2x02_P2.54mm_Vertical
+Through hole straight socket strip, 2x02, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x02 2.54mm double row
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_2x02_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x02, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x02 2.54mm double row
+0
+4
+4
+Connector_PinSocket_2.54mm
+PinSocket_2x03_P2.54mm_Horizontal
+Through hole angled socket strip, 2x03, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x03 2.54mm double row
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_2x03_P2.54mm_Vertical
+Through hole straight socket strip, 2x03, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x03 2.54mm double row
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_2x03_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x03, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x03 2.54mm double row
+0
+6
+6
+Connector_PinSocket_2.54mm
+PinSocket_2x04_P2.54mm_Horizontal
+Through hole angled socket strip, 2x04, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x04 2.54mm double row
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_2x04_P2.54mm_Vertical
+Through hole straight socket strip, 2x04, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x04 2.54mm double row
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_2x04_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x04, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x04 2.54mm double row
+0
+8
+8
+Connector_PinSocket_2.54mm
+PinSocket_2x05_P2.54mm_Horizontal
+Through hole angled socket strip, 2x05, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x05 2.54mm double row
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_2x05_P2.54mm_Vertical
+Through hole straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x05 2.54mm double row
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_2x05_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x05 2.54mm double row
+0
+10
+10
+Connector_PinSocket_2.54mm
+PinSocket_2x06_P2.54mm_Horizontal
+Through hole angled socket strip, 2x06, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x06 2.54mm double row
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_2x06_P2.54mm_Vertical
+Through hole straight socket strip, 2x06, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x06 2.54mm double row
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_2x06_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x06, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x06 2.54mm double row
+0
+12
+12
+Connector_PinSocket_2.54mm
+PinSocket_2x07_P2.54mm_Horizontal
+Through hole angled socket strip, 2x07, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x07 2.54mm double row
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_2x07_P2.54mm_Vertical
+Through hole straight socket strip, 2x07, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x07 2.54mm double row
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_2x07_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x07, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x07 2.54mm double row
+0
+14
+14
+Connector_PinSocket_2.54mm
+PinSocket_2x08_P2.54mm_Horizontal
+Through hole angled socket strip, 2x08, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x08 2.54mm double row
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_2x08_P2.54mm_Vertical
+Through hole straight socket strip, 2x08, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x08 2.54mm double row
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_2x08_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x08, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x08 2.54mm double row
+0
+16
+16
+Connector_PinSocket_2.54mm
+PinSocket_2x09_P2.54mm_Horizontal
+Through hole angled socket strip, 2x09, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x09 2.54mm double row
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_2x09_P2.54mm_Vertical
+Through hole straight socket strip, 2x09, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x09 2.54mm double row
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_2x09_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x09, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x09 2.54mm double row
+0
+18
+18
+Connector_PinSocket_2.54mm
+PinSocket_2x10_P2.54mm_Horizontal
+Through hole angled socket strip, 2x10, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x10 2.54mm double row
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_2x10_P2.54mm_Vertical
+Through hole straight socket strip, 2x10, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x10 2.54mm double row
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_2x10_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x10, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x10 2.54mm double row
+0
+20
+20
+Connector_PinSocket_2.54mm
+PinSocket_2x11_P2.54mm_Horizontal
+Through hole angled socket strip, 2x11, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x11 2.54mm double row
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_2x11_P2.54mm_Vertical
+Through hole straight socket strip, 2x11, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x11 2.54mm double row
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_2x11_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x11, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x11 2.54mm double row
+0
+22
+22
+Connector_PinSocket_2.54mm
+PinSocket_2x12_P2.54mm_Horizontal
+Through hole angled socket strip, 2x12, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x12 2.54mm double row
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_2x12_P2.54mm_Vertical
+Through hole straight socket strip, 2x12, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x12 2.54mm double row
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_2x12_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x12, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x12 2.54mm double row
+0
+24
+24
+Connector_PinSocket_2.54mm
+PinSocket_2x13_P2.54mm_Horizontal
+Through hole angled socket strip, 2x13, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x13 2.54mm double row
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_2x13_P2.54mm_Vertical
+Through hole straight socket strip, 2x13, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x13 2.54mm double row
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_2x13_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x13, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x13 2.54mm double row
+0
+26
+26
+Connector_PinSocket_2.54mm
+PinSocket_2x14_P2.54mm_Horizontal
+Through hole angled socket strip, 2x14, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x14 2.54mm double row
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_2x14_P2.54mm_Vertical
+Through hole straight socket strip, 2x14, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x14 2.54mm double row
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_2x14_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x14, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x14 2.54mm double row
+0
+28
+28
+Connector_PinSocket_2.54mm
+PinSocket_2x15_P2.54mm_Horizontal
+Through hole angled socket strip, 2x15, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x15 2.54mm double row
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_2x15_P2.54mm_Vertical
+Through hole straight socket strip, 2x15, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x15 2.54mm double row
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_2x15_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x15, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x15 2.54mm double row
+0
+30
+30
+Connector_PinSocket_2.54mm
+PinSocket_2x16_P2.54mm_Horizontal
+Through hole angled socket strip, 2x16, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x16 2.54mm double row
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_2x16_P2.54mm_Vertical
+Through hole straight socket strip, 2x16, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x16 2.54mm double row
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_2x16_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x16, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x16 2.54mm double row
+0
+32
+32
+Connector_PinSocket_2.54mm
+PinSocket_2x17_P2.54mm_Horizontal
+Through hole angled socket strip, 2x17, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x17 2.54mm double row
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_2x17_P2.54mm_Vertical
+Through hole straight socket strip, 2x17, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x17 2.54mm double row
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_2x17_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x17, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x17 2.54mm double row
+0
+34
+34
+Connector_PinSocket_2.54mm
+PinSocket_2x18_P2.54mm_Horizontal
+Through hole angled socket strip, 2x18, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x18 2.54mm double row
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_2x18_P2.54mm_Vertical
+Through hole straight socket strip, 2x18, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x18 2.54mm double row
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_2x18_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x18, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x18 2.54mm double row
+0
+36
+36
+Connector_PinSocket_2.54mm
+PinSocket_2x19_P2.54mm_Horizontal
+Through hole angled socket strip, 2x19, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x19 2.54mm double row
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_2x19_P2.54mm_Vertical
+Through hole straight socket strip, 2x19, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x19 2.54mm double row
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_2x19_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x19, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x19 2.54mm double row
+0
+38
+38
+Connector_PinSocket_2.54mm
+PinSocket_2x20_P2.54mm_Horizontal
+Through hole angled socket strip, 2x20, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x20 2.54mm double row
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_2x20_P2.54mm_Vertical
+Through hole straight socket strip, 2x20, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x20 2.54mm double row
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_2x20_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x20, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x20 2.54mm double row
+0
+40
+40
+Connector_PinSocket_2.54mm
+PinSocket_2x21_P2.54mm_Horizontal
+Through hole angled socket strip, 2x21, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x21 2.54mm double row
+0
+42
+42
+Connector_PinSocket_2.54mm
+PinSocket_2x21_P2.54mm_Vertical
+Through hole straight socket strip, 2x21, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x21 2.54mm double row
+0
+42
+42
+Connector_PinSocket_2.54mm
+PinSocket_2x21_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x21, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x21 2.54mm double row
+0
+42
+42
+Connector_PinSocket_2.54mm
+PinSocket_2x22_P2.54mm_Horizontal
+Through hole angled socket strip, 2x22, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x22 2.54mm double row
+0
+44
+44
+Connector_PinSocket_2.54mm
+PinSocket_2x22_P2.54mm_Vertical
+Through hole straight socket strip, 2x22, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x22 2.54mm double row
+0
+44
+44
+Connector_PinSocket_2.54mm
+PinSocket_2x22_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x22, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x22 2.54mm double row
+0
+44
+44
+Connector_PinSocket_2.54mm
+PinSocket_2x23_P2.54mm_Horizontal
+Through hole angled socket strip, 2x23, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x23 2.54mm double row
+0
+46
+46
+Connector_PinSocket_2.54mm
+PinSocket_2x23_P2.54mm_Vertical
+Through hole straight socket strip, 2x23, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x23 2.54mm double row
+0
+46
+46
+Connector_PinSocket_2.54mm
+PinSocket_2x23_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x23, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x23 2.54mm double row
+0
+46
+46
+Connector_PinSocket_2.54mm
+PinSocket_2x24_P2.54mm_Horizontal
+Through hole angled socket strip, 2x24, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x24 2.54mm double row
+0
+48
+48
+Connector_PinSocket_2.54mm
+PinSocket_2x24_P2.54mm_Vertical
+Through hole straight socket strip, 2x24, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x24 2.54mm double row
+0
+48
+48
+Connector_PinSocket_2.54mm
+PinSocket_2x24_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x24, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x24 2.54mm double row
+0
+48
+48
+Connector_PinSocket_2.54mm
+PinSocket_2x25_P2.54mm_Horizontal
+Through hole angled socket strip, 2x25, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x25 2.54mm double row
+0
+50
+50
+Connector_PinSocket_2.54mm
+PinSocket_2x25_P2.54mm_Vertical
+Through hole straight socket strip, 2x25, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x25 2.54mm double row
+0
+50
+50
+Connector_PinSocket_2.54mm
+PinSocket_2x25_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x25, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x25 2.54mm double row
+0
+50
+50
+Connector_PinSocket_2.54mm
+PinSocket_2x26_P2.54mm_Horizontal
+Through hole angled socket strip, 2x26, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x26 2.54mm double row
+0
+52
+52
+Connector_PinSocket_2.54mm
+PinSocket_2x26_P2.54mm_Vertical
+Through hole straight socket strip, 2x26, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x26 2.54mm double row
+0
+52
+52
+Connector_PinSocket_2.54mm
+PinSocket_2x26_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x26, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x26 2.54mm double row
+0
+52
+52
+Connector_PinSocket_2.54mm
+PinSocket_2x27_P2.54mm_Horizontal
+Through hole angled socket strip, 2x27, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x27 2.54mm double row
+0
+54
+54
+Connector_PinSocket_2.54mm
+PinSocket_2x27_P2.54mm_Vertical
+Through hole straight socket strip, 2x27, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x27 2.54mm double row
+0
+54
+54
+Connector_PinSocket_2.54mm
+PinSocket_2x27_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x27, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x27 2.54mm double row
+0
+54
+54
+Connector_PinSocket_2.54mm
+PinSocket_2x28_P2.54mm_Horizontal
+Through hole angled socket strip, 2x28, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x28 2.54mm double row
+0
+56
+56
+Connector_PinSocket_2.54mm
+PinSocket_2x28_P2.54mm_Vertical
+Through hole straight socket strip, 2x28, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x28 2.54mm double row
+0
+56
+56
+Connector_PinSocket_2.54mm
+PinSocket_2x28_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x28, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x28 2.54mm double row
+0
+56
+56
+Connector_PinSocket_2.54mm
+PinSocket_2x29_P2.54mm_Horizontal
+Through hole angled socket strip, 2x29, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x29 2.54mm double row
+0
+58
+58
+Connector_PinSocket_2.54mm
+PinSocket_2x29_P2.54mm_Vertical
+Through hole straight socket strip, 2x29, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x29 2.54mm double row
+0
+58
+58
+Connector_PinSocket_2.54mm
+PinSocket_2x29_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x29, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x29 2.54mm double row
+0
+58
+58
+Connector_PinSocket_2.54mm
+PinSocket_2x30_P2.54mm_Horizontal
+Through hole angled socket strip, 2x30, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x30 2.54mm double row
+0
+60
+60
+Connector_PinSocket_2.54mm
+PinSocket_2x30_P2.54mm_Vertical
+Through hole straight socket strip, 2x30, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x30 2.54mm double row
+0
+60
+60
+Connector_PinSocket_2.54mm
+PinSocket_2x30_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x30, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x30 2.54mm double row
+0
+60
+60
+Connector_PinSocket_2.54mm
+PinSocket_2x31_P2.54mm_Horizontal
+Through hole angled socket strip, 2x31, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x31 2.54mm double row
+0
+62
+62
+Connector_PinSocket_2.54mm
+PinSocket_2x31_P2.54mm_Vertical
+Through hole straight socket strip, 2x31, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x31 2.54mm double row
+0
+62
+62
+Connector_PinSocket_2.54mm
+PinSocket_2x31_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x31, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x31 2.54mm double row
+0
+62
+62
+Connector_PinSocket_2.54mm
+PinSocket_2x32_P2.54mm_Horizontal
+Through hole angled socket strip, 2x32, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x32 2.54mm double row
+0
+64
+64
+Connector_PinSocket_2.54mm
+PinSocket_2x32_P2.54mm_Vertical
+Through hole straight socket strip, 2x32, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x32 2.54mm double row
+0
+64
+64
+Connector_PinSocket_2.54mm
+PinSocket_2x32_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x32, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x32 2.54mm double row
+0
+64
+64
+Connector_PinSocket_2.54mm
+PinSocket_2x33_P2.54mm_Horizontal
+Through hole angled socket strip, 2x33, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x33 2.54mm double row
+0
+66
+66
+Connector_PinSocket_2.54mm
+PinSocket_2x33_P2.54mm_Vertical
+Through hole straight socket strip, 2x33, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x33 2.54mm double row
+0
+66
+66
+Connector_PinSocket_2.54mm
+PinSocket_2x33_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x33, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x33 2.54mm double row
+0
+66
+66
+Connector_PinSocket_2.54mm
+PinSocket_2x34_P2.54mm_Horizontal
+Through hole angled socket strip, 2x34, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x34 2.54mm double row
+0
+68
+68
+Connector_PinSocket_2.54mm
+PinSocket_2x34_P2.54mm_Vertical
+Through hole straight socket strip, 2x34, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x34 2.54mm double row
+0
+68
+68
+Connector_PinSocket_2.54mm
+PinSocket_2x34_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x34, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x34 2.54mm double row
+0
+68
+68
+Connector_PinSocket_2.54mm
+PinSocket_2x35_P2.54mm_Horizontal
+Through hole angled socket strip, 2x35, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x35 2.54mm double row
+0
+70
+70
+Connector_PinSocket_2.54mm
+PinSocket_2x35_P2.54mm_Vertical
+Through hole straight socket strip, 2x35, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x35 2.54mm double row
+0
+70
+70
+Connector_PinSocket_2.54mm
+PinSocket_2x35_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x35, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x35 2.54mm double row
+0
+70
+70
+Connector_PinSocket_2.54mm
+PinSocket_2x36_P2.54mm_Horizontal
+Through hole angled socket strip, 2x36, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x36 2.54mm double row
+0
+72
+72
+Connector_PinSocket_2.54mm
+PinSocket_2x36_P2.54mm_Vertical
+Through hole straight socket strip, 2x36, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x36 2.54mm double row
+0
+72
+72
+Connector_PinSocket_2.54mm
+PinSocket_2x36_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x36, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x36 2.54mm double row
+0
+72
+72
+Connector_PinSocket_2.54mm
+PinSocket_2x37_P2.54mm_Horizontal
+Through hole angled socket strip, 2x37, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x37 2.54mm double row
+0
+74
+74
+Connector_PinSocket_2.54mm
+PinSocket_2x37_P2.54mm_Vertical
+Through hole straight socket strip, 2x37, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x37 2.54mm double row
+0
+74
+74
+Connector_PinSocket_2.54mm
+PinSocket_2x37_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x37, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x37 2.54mm double row
+0
+74
+74
+Connector_PinSocket_2.54mm
+PinSocket_2x38_P2.54mm_Horizontal
+Through hole angled socket strip, 2x38, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x38 2.54mm double row
+0
+76
+76
+Connector_PinSocket_2.54mm
+PinSocket_2x38_P2.54mm_Vertical
+Through hole straight socket strip, 2x38, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x38 2.54mm double row
+0
+76
+76
+Connector_PinSocket_2.54mm
+PinSocket_2x38_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x38, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x38 2.54mm double row
+0
+76
+76
+Connector_PinSocket_2.54mm
+PinSocket_2x39_P2.54mm_Horizontal
+Through hole angled socket strip, 2x39, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x39 2.54mm double row
+0
+78
+78
+Connector_PinSocket_2.54mm
+PinSocket_2x39_P2.54mm_Vertical
+Through hole straight socket strip, 2x39, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x39 2.54mm double row
+0
+78
+78
+Connector_PinSocket_2.54mm
+PinSocket_2x39_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x39, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x39 2.54mm double row
+0
+78
+78
+Connector_PinSocket_2.54mm
+PinSocket_2x40_P2.54mm_Horizontal
+Through hole angled socket strip, 2x40, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated
+Through hole angled socket strip THT 2x40 2.54mm double row
+0
+80
+80
+Connector_PinSocket_2.54mm
+PinSocket_2x40_P2.54mm_Vertical
+Through hole straight socket strip, 2x40, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Through hole socket strip THT 2x40 2.54mm double row
+0
+80
+80
+Connector_PinSocket_2.54mm
+PinSocket_2x40_P2.54mm_Vertical_SMD
+surface-mounted straight socket strip, 2x40, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated
+Surface mounted socket strip SMD 2x40 2.54mm double row
+0
+80
+80
+Connector_RJ
+RJ9_Evercom_5301-440xxx_Horizontal
+Evercom 5301-4P4C RJ9 receptacle, unshielded, https://datasheet.lcsc.com/lcsc/2207051802_EVERCOM-5301-4P4C_C3097715.pdf
+RJ9 Connector tab down
+0
+4
+4
+Connector_RJ
+RJ12_Amphenol_54601-x06_Horizontal
+RJ12 6P6C horizontal socket, plastic body, tab down, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/c-bmj-0082.pdf
+RJ12 connector
+0
+6
+6
+Connector_RJ
+RJ14_Connfly_DS1133-S4_Horizontal
+RJ14 connector 6P4C Horizontal http://www.connfly.com/userfiles/image/UpLoadFile/File/2012/10/26/DS1133.pdf
+RJ14 connector 6P4C Connfly DS1133
+0
+4
+4
+Connector_RJ
+RJ25_Wayconn_MJEA-660X1_Horizontal
+RJ25 6P6C Socket 90 degrees, https://wayconn.com/wp-content/themes/way/datasheet/MJEA-660X1XXX_RJ25_6P6C_PCB_RA.pdf
+RJ12 RJ18 RJ25 jack connector 6P6C
+0
+6
+6
+Connector_RJ
+RJ45_Abracon_ARJP11A-MA_Horizontal
+Shielded RJ45 ethernet connector with transformer and POE, https://abracon.com/Magnetics/lan/ARJP11A.PDF
+ethernet 8p8c transformer poe rj45
+0
+15
+14
+Connector_RJ
+RJ45_Amphenol_54602-x08_Horizontal
+8 Pol Shallow Latch Connector, Modjack, RJ45 (https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/c-bmj-0102.pdf)
+RJ45
+0
+8
+8
+Connector_RJ
+RJ45_Amphenol_RJHSE538X
+Shielded, 2 LED, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X.pdf
+RJ45 8p8c ethernet cat5
+0
+14
+13
+Connector_RJ
+RJ45_Amphenol_RJHSE538X-02
+Shielded, 2 LED, 2 Ports, http://www.amphenolinfocom.eu/NavData/Drawings/RJHSE-538X-02-REVC.pdf
+RJ45 8p8c dual ethernet cat5
+0
+26
+25
+Connector_RJ
+RJ45_Amphenol_RJHSE538X-04
+Shielded, LEDs, 4 Ports, https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/rjhse538x04.pdf
+RJ45 8p8c quad ethernet cat5
+0
+52
+49
+Connector_RJ
+RJ45_Amphenol_RJHSE5380
+Shielded, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X.pdf
+RJ45 8p8c ethernet cat5
+0
+10
+9
+Connector_RJ
+RJ45_Amphenol_RJHSE5380-08
+Shielded, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X08.pdf
+RJ45 8p8c ethernet cat5
+0
+68
+65
+Connector_RJ
+RJ45_Amphenol_RJMG1BD3B8K1ANR
+1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://www.amphenol-cs.com/media/wysiwyg/files/drawing/rjmg1bd3b8k1anr.pdf
+RJ45 Magjack
+0
+14
+13
+Connector_RJ
+RJ45_BEL_SS74301-00x_Vertical
+https://belfuse.com/resources/drawings/stewartconnector/dr-stw-ss-74301-001-ss-74301-002-ss-74301-005.pdf
+RJ45 Vertical Shield LED Green Yellow
+0
+14
+13
+Connector_RJ
+RJ45_Bel_SI-60062-F
+1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://belfuse.com/resources/drawings/magneticsolutions/dr-mag-si-60062-f.pdf
+RJ45 Magjack
+0
+14
+13
+Connector_RJ
+RJ45_Bel_V895-1001-AW_Vertical
+1 Port RJ45 Magjack Vertical Connector SMD 10/100 Base-T, https://www.belfuse.com/resources/drawings/magneticsolutions/dr-mag-v895-1001-aw.pdf
+RJ45 Magjack
+0
+14
+11
+Connector_RJ
+RJ45_Cetus_J1B1211CCD_Horizontal
+1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, Cetus, used and distributed by WIZnet (https://wizwiki.net/wiki/lib/exe/fetch.php?media=products:wiz550web:wiz550webds_kr:j1b1211ccd.pdf)
+RJ45 Magjack
+0
+14
+13
+Connector_RJ
+RJ45_Connfly_DS1128-09-S8xx-S_Horizontal
+1 Port RJ45 8p8c receptacle, shielded, through hole, 2 LEDs, tab up, http://en.connfly.group/static/upload/file//DS1128-09.pdf
+RJ45 8p8c ethernet
+0
+14
+13
+Connector_RJ
+RJ45_HALO_HFJ11-x2450E-LxxRL_Horizontal
+Halo FastJack, Shielded, 2 LEDs, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf
+10/100 Ethernet RJ45 Tab-Down
+0
+14
+13
+Connector_RJ
+RJ45_HALO_HFJ11-x2450ERL_Horizontal
+Halo FastJack, Shielded, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf
+10/100 Ethernet RJ45 Tab-Down
+0
+9
+8
+Connector_RJ
+RJ45_HALO_HFJ11-x2450HRL_Horizontal
+Halo FastJack, Shielded, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf
+10/100 Ethernet RJ45 Tab-Down
+0
+10
+9
+Connector_RJ
+RJ45_Hanrun_HR911105A_Horizontal
+1 Port RJ45 8P8C receptacle, shielded, with magnetics, through hole, 2 LEDs, tab down, http://www.hanrun.com/public/upload/down/2020/09-11/cc11be56d66bb63d5f1eeb85492439c0.pdf
+RJ45 Magjack ethernet
+0
+14
+13
+Connector_RJ
+RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal
+10/100Base-T RJ45 ethernet magnetic transformer connector horizontal with green/yellow LEDs http://www.kycon.com/Pub_Eng_Draw/G7LX-A88S7-BP-GY.pdf
+RJ45 ethernet magnetic
+0
+16
+15
+Connector_RJ
+RJ45_Molex_9346520x_Horizontal
+1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, two LED, tab up
+RJ45 Magjack
+0
+14
+13
+Connector_RJ
+RJ45_Molex_0855135013_Vertical
+1 Port, RJ45, Series 85513, vertical, SMD, https://www.molex.com/pdm_docs/sd/855135013_sd.pdf
+RJ45 Vertical
+0
+9
+9
+Connector_RJ
+RJ45_Ninigi_GE
+1 port ethernet throughhole connector, https://en.ninigi.com/product/rj45ge/pdf
+RJ45 ethernet 8p8c
+0
+10
+9
+Connector_RJ
+RJ45_OST_PJ012-8P8CX_Vertical
+RJ45 vertical connector https://www.on-shore.com/wp-content/uploads/PJ012-8P8CX.pdf
+RJ45 PJ012
+0
+8
+8
+Connector_RJ
+RJ45_Plug_Metz_AJP92A8813
+plug, ethernet, 8P8C, RJ45 Plug
+AJP92A8813 8P8C RJ45 ethernet plug
+0
+8
+8
+Connector_RJ
+RJ45_Pulse_JK00177NL_Horizontal
+10/100/1000 Base-T RJ45 single port with LEDs and 75W POE, https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/J432/doc_part/J432.pdf
+RJ45 8p8c ethernet POE
+0
+22
+21
+Connector_RJ
+RJ45_Pulse_JK0654219NL_Horizontal
+10/100/1000 Base-T RJ45 single port with LEDs https://media.digikey.com/pdf/Data%20Sheets/Pulse%20PDFs/JK%20Series.pdf#page=2
+RJ45 8p8c ethernet
+0
+18
+17
+Connector_RJ
+RJ45_Pulse_JXD6-0001NL_Horizontal
+RJ45 ethernet transformer with magnetics (https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/JXD6-0001NL/doc_part/JXD6-0001NL.pdf)
+ethernet 8p8c transformer magjack
+0
+12
+11
+Connector_RJ
+RJ45_RCH_RC01937
+1 port ethernet throughhole connector, https://www.lcsc.com/datasheet/lcsc_datasheet_2411121142_RCH-RC01937_C708652.pdf
+RJ45 ethernet 8p8c shielded
+0
+10
+9
+Connector_RJ
+RJ45_UDE_RB1-125B8G1A
+1 Port RJ45 Connector Through Hole 10/100/1000 Base-T, https://datasheet.lcsc.com/szlcsc/1901091107_UDE-Corp-RB1-125B8G1A_C363353.pdf#page=3
+RJ45 ethernet
+0
+16
+15
+Connector_RJ
+RJ45_Wuerth_7499010001A_Horizontal
+10/100Base-TX RJ45 ethernet magnetic transformer connector horizontal https://katalog.we-online.de/pbs/datasheet/7499010001A.pdf
+RJ45 ethernet magnetic
+0
+10
+9
+Connector_RJ
+RJ45_Wuerth_7499010121A_Horizontal
+10/100Base-TX RJ45 ethernet magnetic transformer connector horizontal with green/orange LEDs https://katalog.we-online.de/pbs/datasheet/7499010121A.pdf
+RJ45 ethernet magnetic
+0
+14
+13
+Connector_RJ
+RJ45_Wuerth_7499010211A_Horizontal
+RJ45 connector, horizontal, tab down, 10/100Base-TX, with magnetics, green/yellow LEDs, https://katalog.we-online.de/pbs/datasheet/7499010211A.pdf
+RJ45 ethernet magnetic magjack transformer
+0
+14
+13
+Connector_RJ
+RJ45_Wuerth_7499111446_Horizontal
+LAN-Transformer WE-RJ45LAN 10/100/1000 BaseT
+ethernet lan connector
+0
+16
+15
+Connector_RJ
+RJ45_Wuerth_7499151120_Horizontal
+Wuerth 7499151120, LAN-Transformer WE-RJ45LAN 10/100/1000 BaseT, Dual Ethernet Jack (http://katalog.we-online.de/pbs/datasheet/7499151120.pdf)
+ethernet lan connector
+0
+32
+29
+Connector_RJ
+RJ45_Wuerth_74980111211_Horizontal
+RJ45 LAN Transformer 10/100BaseT (https://katalog.we-online.de/pbs/datasheet/74980111211.pdf)
+lan magnetics transformer
+0
+14
+13
+Connector_SATA_SAS
+SAS-mini_TEConnectivity_1888174_Vertical
+36pin mini SAS connector, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1888174&DocType=Customer+Drawing&DocLang=English
+SAS mini connector
+0
+44
+44
+Connector_SATA_SAS
+SATA_Amphenol_10029364-001LF_Horizontal
+https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10029364.pdf
+SATA
+0
+24
+23
+Connector_Samtec
+Samtec_FMC_ASP-134486-01_10x40_P1.27mm_Vertical
+http://suddendocs.samtec.com/prints/asp-134486-01-mkt.pdf
+FMC HPC
+0
+400
+400
+Connector_Samtec
+Samtec_FMC_ASP-134602-01_10x40_P1.27mm_Vertical
+https://www.marutsu.co.jp/contents/shop/marutsu/ds/asp-134602-01.pdf
+FMC HPC
+0
+400
+400
+Connector_Samtec
+Samtec_FMC_ASP-134604-01_4x40_Vertical
+https://suddendocs.samtec.com/prints/asp-134604-01-mkt.pdf
+FMC LPC VITA 
+0
+160
+160
+Connector_Samtec
+Samtec_LSHM-105-xx.x-x-DV-N_2x05_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-105-xx.x-x-DV-N, 5 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+10
+10
+Connector_Samtec
+Samtec_LSHM-105-xx.x-x-DV-S_2x05-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-105-xx.x-x-DV-S, 5 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+12
+11
+Connector_Samtec
+Samtec_LSHM-110-xx.x-x-DV-N_2x10_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-110-xx.x-x-DV-N, 10 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+20
+20
+Connector_Samtec
+Samtec_LSHM-110-xx.x-x-DV-S_2x10-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-110-xx.x-x-DV-S, 10 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+22
+21
+Connector_Samtec
+Samtec_LSHM-120-xx.x-x-DV-N_2x20_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-120-xx.x-x-DV-N, 20 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+40
+40
+Connector_Samtec
+Samtec_LSHM-120-xx.x-x-DV-S_2x20-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-120-xx.x-x-DV-S, 20 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+42
+41
+Connector_Samtec
+Samtec_LSHM-130-xx.x-x-DV-N_2x30_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-130-xx.x-x-DV-N, 30 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+60
+60
+Connector_Samtec
+Samtec_LSHM-130-xx.x-x-DV-S_2x30-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-130-xx.x-x-DV-S, 30 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+62
+61
+Connector_Samtec
+Samtec_LSHM-140-xx.x-x-DV-N_2x40_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-140-xx.x-x-DV-N, 40 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+80
+80
+Connector_Samtec
+Samtec_LSHM-140-xx.x-x-DV-S_2x40-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-140-xx.x-x-DV-S, 40 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+82
+81
+Connector_Samtec
+Samtec_LSHM-150-xx.x-x-DV-N_2x50_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-150-xx.x-x-DV-N, 50 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+100
+100
+Connector_Samtec
+Samtec_LSHM-150-xx.x-x-DV-S_2x50-1SH_P0.50mm_Vertical
+Samtec LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-150-xx.x-x-DV-S, 50 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec  vertical
+0
+102
+101
+Connector_Samtec
+Samtec_SS4-10-3.00-x-D-K-xR_2x10_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x10 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+20
+20
+Connector_Samtec
+Samtec_SS4-10-3.50-x-D-K-xR_2x10_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x10 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+20
+20
+Connector_Samtec
+Samtec_SS4-15-3.00-x-D-K-xR_2x15_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x15 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+30
+30
+Connector_Samtec
+Samtec_SS4-15-3.50-x-D-K-xR_2x15_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x15 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+30
+30
+Connector_Samtec
+Samtec_SS4-20-3.00-x-D-K-xR_2x20_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x20 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+40
+40
+Connector_Samtec
+Samtec_SS4-20-3.50-x-D-K-xR_2x20_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x20 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+40
+40
+Connector_Samtec
+Samtec_SS4-30-3.00-x-D-K-xR_2x30_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x30 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+60
+60
+Connector_Samtec
+Samtec_SS4-30-3.50-x-D-K-xR_2x30_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x30 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+60
+60
+Connector_Samtec
+Samtec_SS4-40-3.00-x-D-K-xR_2x40_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x40 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+80
+80
+Connector_Samtec
+Samtec_SS4-40-3.50-x-D-K-xR_2x40_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x40 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+80
+80
+Connector_Samtec
+Samtec_SS4-50-3.00-x-D-K-xR_2x50_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x50 ways, 3.00 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+100
+100
+Connector_Samtec
+Samtec_SS4-50-3.50-x-D-K-xR_2x50_P0.4mm_Socket
+Micro Blade & Beam Ultra Fine Pitch Socket, 0.40 mm pitch, 02x50 ways, 3.50 lead style (source: https://suddendocs.samtec.com/prints/ss4-xx-x.xx-x-d-x-xx-tr-footprint.pdf)
+conn samtec board-to-board socket high-speed
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-102-02-xxx-DV-BE-LC_2x02_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-BE-LC, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+4
+4
+Connector_Samtec_HLE_SMD
+Samtec_HLE-102-02-xxx-DV-BE_2x02_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-BE, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+4
+4
+Connector_Samtec_HLE_SMD
+Samtec_HLE-102-02-xxx-DV-LC_2x02_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-LC, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+4
+4
+Connector_Samtec_HLE_SMD
+Samtec_HLE-102-02-xxx-DV_2x02_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+4
+4
+Connector_Samtec_HLE_SMD
+Samtec_HLE-103-02-xxx-DV-BE-LC_2x03_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-BE-LC, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+6
+6
+Connector_Samtec_HLE_SMD
+Samtec_HLE-103-02-xxx-DV-BE_2x03_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-BE, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+6
+6
+Connector_Samtec_HLE_SMD
+Samtec_HLE-103-02-xxx-DV-LC_2x03_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-LC, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+6
+6
+Connector_Samtec_HLE_SMD
+Samtec_HLE-103-02-xxx-DV_2x03_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+6
+6
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV-A_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-A, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV-BE-A_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-A, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV-BE-LC_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV-BE_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV-LC_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-104-02-xxx-DV_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV-A_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-A, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV-BE-A_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE-A, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV-BE-LC_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV-BE_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV-LC_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-105-02-xxx-DV_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV-A_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-A, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV-BE-A_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE-A, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV-BE-LC_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV-BE_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV-LC_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-106-02-xxx-DV_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV-A_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-A, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV-BE-A_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE-A, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV-BE-LC_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV-BE_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV-LC_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-107-02-xxx-DV_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV-A_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-A, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV-BE-A_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE-A, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV-BE-LC_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV-BE_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV-LC_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-108-02-xxx-DV_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV-A_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV-BE-A_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV-BE-LC_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV-BE_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV-LC_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-109-02-xxx-DV_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV-A_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-A, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV-BE-A_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE-A, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV-BE-LC_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV-BE_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV-LC_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-110-02-xxx-DV_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV-A_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-A, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV-BE-A_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE-A, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV-BE-LC_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV-BE_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV-LC_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-111-02-xxx-DV_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV-A_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-A, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV-BE-A_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE-A, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV-BE-LC_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV-BE_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV-LC_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-112-02-xxx-DV_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV-A_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-A, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV-BE-A_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE-A, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV-BE-LC_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV-BE_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV-LC_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-113-02-xxx-DV_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV-A_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-A, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV-BE-A_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE-A, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV-BE-LC_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV-BE_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV-LC_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-114-02-xxx-DV_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV-A_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-A, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV-BE-A_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE-A, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV-BE-LC_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV-BE_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV-LC_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-115-02-xxx-DV_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV-A_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-A, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV-BE-A_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE-A, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV-BE-LC_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV-BE_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV-LC_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-116-02-xxx-DV_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV-A_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-A, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV-BE-A_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE-A, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV-BE-LC_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV-BE_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV-LC_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-117-02-xxx-DV_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV-A_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-A, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV-BE-A_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE-A, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV-BE-LC_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV-BE_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV-LC_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-118-02-xxx-DV_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV-A_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-A, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV-BE-A_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE-A, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV-BE-LC_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV-BE_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV-LC_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-119-02-xxx-DV_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV-A_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-A, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV-BE-A_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE-A, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV-BE-LC_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV-BE_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV-LC_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-120-02-xxx-DV_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV-A_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV-BE-A_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV-BE-LC_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV-BE_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV-LC_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-121-02-xxx-DV_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV-A_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-A, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV-BE-A_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE-A, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV-BE-LC_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV-BE_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV-LC_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-122-02-xxx-DV_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV-A_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-A, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV-BE-A_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-A, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV-BE-LC_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV-BE_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV-LC_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-123-02-xxx-DV_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV-A_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-A, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV-BE-A_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE-A, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV-BE-LC_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV-BE_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV-LC_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-124-02-xxx-DV_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV-A_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-A, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV-BE-A_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE-A, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV-BE-LC_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV-BE_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV-LC_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-125-02-xxx-DV_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV-A_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-A, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV-BE-A_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE-A, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV-BE-LC_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV-BE_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV-LC_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-126-02-xxx-DV_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV-A_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-A, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV-BE-A_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE-A, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV-BE-LC_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV-BE_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV-LC_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-127-02-xxx-DV_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV-A_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-A, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV-BE-A_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-A, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV-BE-LC_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV-BE_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV-LC_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-128-02-xxx-DV_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV-A_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-A, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV-BE-A_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE-A, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV-BE-LC_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV-BE_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV-LC_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-129-02-xxx-DV_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV-A_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-A, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV-BE-A_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE-A, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV-BE-LC_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV-BE_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV-LC_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-130-02-xxx-DV_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV-A_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-A, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV-BE-A_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE-A, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV-BE-LC_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV-BE_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV-LC_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-131-02-xxx-DV_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV-A_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-A, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV-BE-A_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE-A, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV-BE-LC_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV-BE_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV-LC_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-132-02-xxx-DV_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV-A_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-A, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV-BE-A_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE-A, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV-BE-LC_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV-BE_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV-LC_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-133-02-xxx-DV_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV-A_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-A, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV-BE-A_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE-A, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV-BE-LC_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV-BE_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV-LC_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-134-02-xxx-DV_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV-A_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV-BE-A_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV-BE-LC_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV-BE_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV-LC_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-135-02-xxx-DV_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV-A_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-A, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV-BE-A_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE-A, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV-BE-LC_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV-BE_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV-LC_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-136-02-xxx-DV_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV-A_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-A, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV-BE-A_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE-A, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV-BE-LC_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV-BE_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV-LC_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-137-02-xxx-DV_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV-A_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-A, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV-BE-A_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE-A, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV-BE-LC_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV-BE_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV-LC_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-138-02-xxx-DV_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV-A_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-A, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV-BE-A_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE-A, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV-BE-LC_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV-BE_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV-LC_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-139-02-xxx-DV_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV-A_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-A, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV-BE-A_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE-A, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV-BE-LC_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV-BE_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV-LC_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-140-02-xxx-DV_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV-A_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-A, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV-BE-A_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE-A, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV-BE-LC_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV-BE_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV-LC_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-141-02-xxx-DV_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV-A_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-A, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV-BE-A_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE-A, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV-BE-LC_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV-BE_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV-LC_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-142-02-xxx-DV_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV-A_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-A, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV-BE-A_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE-A, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV-BE-LC_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV-BE_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV-LC_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-143-02-xxx-DV_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV-A_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-A, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV-BE-A_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE-A, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV-BE-LC_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV-BE_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV-LC_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-144-02-xxx-DV_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV-A_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-A, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV-BE-A_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE-A, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV-BE-LC_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV-BE_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV-LC_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-145-02-xxx-DV_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV-A_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-A, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV-BE-A_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE-A, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV-BE-LC_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV-BE_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV-LC_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-146-02-xxx-DV_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV-A_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-A, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV-BE-A_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE-A, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV-BE-LC_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV-BE_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV-LC_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-147-02-xxx-DV_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV-A_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-A, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV-BE-A_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE-A, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV-BE-LC_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV-BE_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV-LC_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-148-02-xxx-DV_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV-A_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-A, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV-BE-A_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE-A, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV-BE-LC_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV-BE_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV-LC_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-149-02-xxx-DV_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV-A_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-A, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV-BE-A_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE-A, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV-BE-LC_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV-BE_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV-LC_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_SMD
+Samtec_HLE-150-02-xxx-DV_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_THT
+Samtec_HLE-104-02-xx-DV-PE-LC_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-PE-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_THT
+Samtec_HLE-104-02-xx-DV-PE_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-PE (compatible alternatives: HLE-104-02-xx-DV-PE-BE), 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_THT
+Samtec_HLE-104-02-xx-DV-TE_2x04_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-TE, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+8
+8
+Connector_Samtec_HLE_THT
+Samtec_HLE-105-02-xx-DV-PE-LC_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-PE-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_THT
+Samtec_HLE-105-02-xx-DV-PE_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-PE (compatible alternatives: HLE-105-02-xx-DV-PE-BE), 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_THT
+Samtec_HLE-105-02-xx-DV-TE_2x05_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-TE, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+10
+10
+Connector_Samtec_HLE_THT
+Samtec_HLE-106-02-xx-DV-PE-LC_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-PE-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_THT
+Samtec_HLE-106-02-xx-DV-PE_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-PE (compatible alternatives: HLE-106-02-xx-DV-PE-BE), 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_THT
+Samtec_HLE-106-02-xx-DV-TE_2x06_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-TE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+12
+12
+Connector_Samtec_HLE_THT
+Samtec_HLE-107-02-xx-DV-PE-LC_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-PE-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_THT
+Samtec_HLE-107-02-xx-DV-PE_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-PE (compatible alternatives: HLE-107-02-xx-DV-PE-BE), 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_THT
+Samtec_HLE-107-02-xx-DV-TE_2x07_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-TE, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+14
+14
+Connector_Samtec_HLE_THT
+Samtec_HLE-108-02-xx-DV-PE-LC_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-PE-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_THT
+Samtec_HLE-108-02-xx-DV-PE_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-PE (compatible alternatives: HLE-108-02-xx-DV-PE-BE), 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_THT
+Samtec_HLE-108-02-xx-DV-TE_2x08_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-TE, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+16
+16
+Connector_Samtec_HLE_THT
+Samtec_HLE-109-02-xx-DV-PE-LC_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-PE-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_THT
+Samtec_HLE-109-02-xx-DV-PE_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-PE (compatible alternatives: HLE-109-02-xx-DV-PE-BE), 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_THT
+Samtec_HLE-109-02-xx-DV-TE_2x09_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-TE, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+18
+18
+Connector_Samtec_HLE_THT
+Samtec_HLE-110-02-xx-DV-PE-LC_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-PE-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_THT
+Samtec_HLE-110-02-xx-DV-PE_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-PE (compatible alternatives: HLE-110-02-xx-DV-PE-BE), 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_THT
+Samtec_HLE-110-02-xx-DV-TE_2x10_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-TE, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+20
+20
+Connector_Samtec_HLE_THT
+Samtec_HLE-111-02-xx-DV-PE-LC_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-PE-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_THT
+Samtec_HLE-111-02-xx-DV-PE_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-PE (compatible alternatives: HLE-111-02-xx-DV-PE-BE), 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_THT
+Samtec_HLE-111-02-xx-DV-TE_2x11_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-TE, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+22
+22
+Connector_Samtec_HLE_THT
+Samtec_HLE-112-02-xx-DV-PE-LC_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-PE-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_THT
+Samtec_HLE-112-02-xx-DV-PE_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-PE (compatible alternatives: HLE-112-02-xx-DV-PE-BE), 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_THT
+Samtec_HLE-112-02-xx-DV-TE_2x12_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-TE, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+24
+24
+Connector_Samtec_HLE_THT
+Samtec_HLE-113-02-xx-DV-PE-LC_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-PE-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_THT
+Samtec_HLE-113-02-xx-DV-PE_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-PE (compatible alternatives: HLE-113-02-xx-DV-PE-BE), 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_THT
+Samtec_HLE-113-02-xx-DV-TE_2x13_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-TE, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+26
+26
+Connector_Samtec_HLE_THT
+Samtec_HLE-114-02-xx-DV-PE-LC_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-PE-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_THT
+Samtec_HLE-114-02-xx-DV-PE_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-PE (compatible alternatives: HLE-114-02-xx-DV-PE-BE), 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_THT
+Samtec_HLE-114-02-xx-DV-TE_2x14_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-TE, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+28
+28
+Connector_Samtec_HLE_THT
+Samtec_HLE-115-02-xx-DV-PE-LC_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-PE-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_THT
+Samtec_HLE-115-02-xx-DV-PE_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-PE (compatible alternatives: HLE-115-02-xx-DV-PE-BE), 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_THT
+Samtec_HLE-115-02-xx-DV-TE_2x15_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-TE, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+30
+30
+Connector_Samtec_HLE_THT
+Samtec_HLE-116-02-xx-DV-PE-LC_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-PE-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_THT
+Samtec_HLE-116-02-xx-DV-PE_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-PE (compatible alternatives: HLE-116-02-xx-DV-PE-BE), 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_THT
+Samtec_HLE-116-02-xx-DV-TE_2x16_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-TE, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+32
+32
+Connector_Samtec_HLE_THT
+Samtec_HLE-117-02-xx-DV-PE-LC_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-PE-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_THT
+Samtec_HLE-117-02-xx-DV-PE_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-PE (compatible alternatives: HLE-117-02-xx-DV-PE-BE), 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_THT
+Samtec_HLE-117-02-xx-DV-TE_2x17_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-TE, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+34
+34
+Connector_Samtec_HLE_THT
+Samtec_HLE-118-02-xx-DV-PE-LC_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-PE-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_THT
+Samtec_HLE-118-02-xx-DV-PE_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-PE (compatible alternatives: HLE-118-02-xx-DV-PE-BE), 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_THT
+Samtec_HLE-118-02-xx-DV-TE_2x18_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-TE, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+36
+36
+Connector_Samtec_HLE_THT
+Samtec_HLE-119-02-xx-DV-PE-LC_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-PE-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_THT
+Samtec_HLE-119-02-xx-DV-PE_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-PE (compatible alternatives: HLE-119-02-xx-DV-PE-BE), 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_THT
+Samtec_HLE-119-02-xx-DV-TE_2x19_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-TE, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+38
+38
+Connector_Samtec_HLE_THT
+Samtec_HLE-120-02-xx-DV-PE-LC_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-PE-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_THT
+Samtec_HLE-120-02-xx-DV-PE_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-PE (compatible alternatives: HLE-120-02-xx-DV-PE-BE), 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_THT
+Samtec_HLE-120-02-xx-DV-TE_2x20_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-TE, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+40
+40
+Connector_Samtec_HLE_THT
+Samtec_HLE-121-02-xx-DV-PE-LC_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-PE-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_THT
+Samtec_HLE-121-02-xx-DV-PE_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-PE (compatible alternatives: HLE-121-02-xx-DV-PE-BE), 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_THT
+Samtec_HLE-121-02-xx-DV-TE_2x21_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-TE, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+42
+42
+Connector_Samtec_HLE_THT
+Samtec_HLE-122-02-xx-DV-PE-LC_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-PE-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_THT
+Samtec_HLE-122-02-xx-DV-PE_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-PE (compatible alternatives: HLE-122-02-xx-DV-PE-BE), 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_THT
+Samtec_HLE-122-02-xx-DV-TE_2x22_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-TE, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+44
+44
+Connector_Samtec_HLE_THT
+Samtec_HLE-123-02-xx-DV-PE-LC_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-PE-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_THT
+Samtec_HLE-123-02-xx-DV-PE_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-PE (compatible alternatives: HLE-123-02-xx-DV-PE-BE), 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_THT
+Samtec_HLE-123-02-xx-DV-TE_2x23_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-TE, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+46
+46
+Connector_Samtec_HLE_THT
+Samtec_HLE-124-02-xx-DV-PE-LC_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-PE-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_THT
+Samtec_HLE-124-02-xx-DV-PE_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-PE (compatible alternatives: HLE-124-02-xx-DV-PE-BE), 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_THT
+Samtec_HLE-124-02-xx-DV-TE_2x24_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-TE, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+48
+48
+Connector_Samtec_HLE_THT
+Samtec_HLE-125-02-xx-DV-PE-LC_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-PE-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_THT
+Samtec_HLE-125-02-xx-DV-PE_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-PE (compatible alternatives: HLE-125-02-xx-DV-PE-BE), 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_THT
+Samtec_HLE-125-02-xx-DV-TE_2x25_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-TE, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+50
+50
+Connector_Samtec_HLE_THT
+Samtec_HLE-126-02-xx-DV-PE-LC_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-PE-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_THT
+Samtec_HLE-126-02-xx-DV-PE_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-PE (compatible alternatives: HLE-126-02-xx-DV-PE-BE), 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_THT
+Samtec_HLE-126-02-xx-DV-TE_2x26_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-TE, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+52
+52
+Connector_Samtec_HLE_THT
+Samtec_HLE-127-02-xx-DV-PE-LC_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-PE-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_THT
+Samtec_HLE-127-02-xx-DV-PE_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-PE (compatible alternatives: HLE-127-02-xx-DV-PE-BE), 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_THT
+Samtec_HLE-127-02-xx-DV-TE_2x27_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-TE, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+54
+54
+Connector_Samtec_HLE_THT
+Samtec_HLE-128-02-xx-DV-PE-LC_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-PE-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_THT
+Samtec_HLE-128-02-xx-DV-PE_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-PE (compatible alternatives: HLE-128-02-xx-DV-PE-BE), 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_THT
+Samtec_HLE-128-02-xx-DV-TE_2x28_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-TE, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+56
+56
+Connector_Samtec_HLE_THT
+Samtec_HLE-129-02-xx-DV-PE-LC_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-PE-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_THT
+Samtec_HLE-129-02-xx-DV-PE_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-PE (compatible alternatives: HLE-129-02-xx-DV-PE-BE), 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_THT
+Samtec_HLE-129-02-xx-DV-TE_2x29_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-TE, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+58
+58
+Connector_Samtec_HLE_THT
+Samtec_HLE-130-02-xx-DV-PE-LC_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-PE-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_THT
+Samtec_HLE-130-02-xx-DV-PE_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-PE (compatible alternatives: HLE-130-02-xx-DV-PE-BE), 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_THT
+Samtec_HLE-130-02-xx-DV-TE_2x30_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-TE, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+60
+60
+Connector_Samtec_HLE_THT
+Samtec_HLE-131-02-xx-DV-PE-LC_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-PE-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_THT
+Samtec_HLE-131-02-xx-DV-PE_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-PE (compatible alternatives: HLE-131-02-xx-DV-PE-BE), 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_THT
+Samtec_HLE-131-02-xx-DV-TE_2x31_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-TE, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+62
+62
+Connector_Samtec_HLE_THT
+Samtec_HLE-132-02-xx-DV-PE-LC_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-PE-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_THT
+Samtec_HLE-132-02-xx-DV-PE_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-PE (compatible alternatives: HLE-132-02-xx-DV-PE-BE), 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_THT
+Samtec_HLE-132-02-xx-DV-TE_2x32_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-TE, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+64
+64
+Connector_Samtec_HLE_THT
+Samtec_HLE-133-02-xx-DV-PE-LC_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-PE-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_THT
+Samtec_HLE-133-02-xx-DV-PE_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-PE (compatible alternatives: HLE-133-02-xx-DV-PE-BE), 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_THT
+Samtec_HLE-133-02-xx-DV-TE_2x33_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-TE, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+66
+66
+Connector_Samtec_HLE_THT
+Samtec_HLE-134-02-xx-DV-PE-LC_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-PE-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_THT
+Samtec_HLE-134-02-xx-DV-PE_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-PE (compatible alternatives: HLE-134-02-xx-DV-PE-BE), 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_THT
+Samtec_HLE-134-02-xx-DV-TE_2x34_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-TE, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+68
+68
+Connector_Samtec_HLE_THT
+Samtec_HLE-135-02-xx-DV-PE-LC_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-PE-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_THT
+Samtec_HLE-135-02-xx-DV-PE_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-PE (compatible alternatives: HLE-135-02-xx-DV-PE-BE), 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_THT
+Samtec_HLE-135-02-xx-DV-TE_2x35_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-TE, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+70
+70
+Connector_Samtec_HLE_THT
+Samtec_HLE-136-02-xx-DV-PE-LC_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-PE-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_THT
+Samtec_HLE-136-02-xx-DV-PE_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-PE (compatible alternatives: HLE-136-02-xx-DV-PE-BE), 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_THT
+Samtec_HLE-136-02-xx-DV-TE_2x36_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-TE, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+72
+72
+Connector_Samtec_HLE_THT
+Samtec_HLE-137-02-xx-DV-PE-LC_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-PE-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_THT
+Samtec_HLE-137-02-xx-DV-PE_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-PE (compatible alternatives: HLE-137-02-xx-DV-PE-BE), 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_THT
+Samtec_HLE-137-02-xx-DV-TE_2x37_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-TE, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+74
+74
+Connector_Samtec_HLE_THT
+Samtec_HLE-138-02-xx-DV-PE-LC_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-PE-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_THT
+Samtec_HLE-138-02-xx-DV-PE_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-PE (compatible alternatives: HLE-138-02-xx-DV-PE-BE), 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_THT
+Samtec_HLE-138-02-xx-DV-TE_2x38_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-TE, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+76
+76
+Connector_Samtec_HLE_THT
+Samtec_HLE-139-02-xx-DV-PE-LC_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-PE-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_THT
+Samtec_HLE-139-02-xx-DV-PE_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-PE (compatible alternatives: HLE-139-02-xx-DV-PE-BE), 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_THT
+Samtec_HLE-139-02-xx-DV-TE_2x39_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-TE, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+78
+78
+Connector_Samtec_HLE_THT
+Samtec_HLE-140-02-xx-DV-PE-LC_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-PE-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_THT
+Samtec_HLE-140-02-xx-DV-PE_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-PE (compatible alternatives: HLE-140-02-xx-DV-PE-BE), 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_THT
+Samtec_HLE-140-02-xx-DV-TE_2x40_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-TE, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+80
+80
+Connector_Samtec_HLE_THT
+Samtec_HLE-141-02-xx-DV-PE-LC_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-PE-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_THT
+Samtec_HLE-141-02-xx-DV-PE_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-PE (compatible alternatives: HLE-141-02-xx-DV-PE-BE), 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_THT
+Samtec_HLE-141-02-xx-DV-TE_2x41_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-TE, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+82
+82
+Connector_Samtec_HLE_THT
+Samtec_HLE-142-02-xx-DV-PE-LC_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-PE-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_THT
+Samtec_HLE-142-02-xx-DV-PE_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-PE (compatible alternatives: HLE-142-02-xx-DV-PE-BE), 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_THT
+Samtec_HLE-142-02-xx-DV-TE_2x42_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-TE, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+84
+84
+Connector_Samtec_HLE_THT
+Samtec_HLE-143-02-xx-DV-PE-LC_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-PE-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_THT
+Samtec_HLE-143-02-xx-DV-PE_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-PE (compatible alternatives: HLE-143-02-xx-DV-PE-BE), 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_THT
+Samtec_HLE-143-02-xx-DV-TE_2x43_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-TE, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+86
+86
+Connector_Samtec_HLE_THT
+Samtec_HLE-144-02-xx-DV-PE-LC_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-PE-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_THT
+Samtec_HLE-144-02-xx-DV-PE_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-PE (compatible alternatives: HLE-144-02-xx-DV-PE-BE), 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_THT
+Samtec_HLE-144-02-xx-DV-TE_2x44_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-TE, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+88
+88
+Connector_Samtec_HLE_THT
+Samtec_HLE-145-02-xx-DV-PE-LC_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-PE-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_THT
+Samtec_HLE-145-02-xx-DV-PE_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-PE (compatible alternatives: HLE-145-02-xx-DV-PE-BE), 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_THT
+Samtec_HLE-145-02-xx-DV-TE_2x45_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-TE, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+90
+90
+Connector_Samtec_HLE_THT
+Samtec_HLE-146-02-xx-DV-PE-LC_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-PE-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_THT
+Samtec_HLE-146-02-xx-DV-PE_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-PE (compatible alternatives: HLE-146-02-xx-DV-PE-BE), 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_THT
+Samtec_HLE-146-02-xx-DV-TE_2x46_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-TE, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+92
+92
+Connector_Samtec_HLE_THT
+Samtec_HLE-147-02-xx-DV-PE-LC_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-PE-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_THT
+Samtec_HLE-147-02-xx-DV-PE_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-PE (compatible alternatives: HLE-147-02-xx-DV-PE-BE), 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_THT
+Samtec_HLE-147-02-xx-DV-TE_2x47_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-TE, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+94
+94
+Connector_Samtec_HLE_THT
+Samtec_HLE-148-02-xx-DV-PE-LC_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-PE-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_THT
+Samtec_HLE-148-02-xx-DV-PE_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-PE (compatible alternatives: HLE-148-02-xx-DV-PE-BE), 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_THT
+Samtec_HLE-148-02-xx-DV-TE_2x48_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-TE, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+96
+96
+Connector_Samtec_HLE_THT
+Samtec_HLE-149-02-xx-DV-PE-LC_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-PE-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_THT
+Samtec_HLE-149-02-xx-DV-PE_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-PE (compatible alternatives: HLE-149-02-xx-DV-PE-BE), 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_THT
+Samtec_HLE-149-02-xx-DV-TE_2x49_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-TE, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+98
+98
+Connector_Samtec_HLE_THT
+Samtec_HLE-150-02-xx-DV-PE-LC_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-PE-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_THT
+Samtec_HLE-150-02-xx-DV-PE_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-PE (compatible alternatives: HLE-150-02-xx-DV-PE-BE), 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HLE_THT
+Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal
+Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-TE, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator
+connector Samtec HLE horizontal
+0
+100
+100
+Connector_Samtec_HPM_THT
+Samtec_HPM-01-01-x-S_Straight_1x01_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x01, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x01 5.08mm single row
+0
+1
+1
+Connector_Samtec_HPM_THT
+Samtec_HPM-01-05-x-S_Straight_1x01_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x01, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x01 5.08mm single row
+0
+1
+1
+Connector_Samtec_HPM_THT
+Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x02, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x02 5.08mm single row
+0
+2
+2
+Connector_Samtec_HPM_THT
+Samtec_HPM-02-05-x-S_Straight_1x02_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x02, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x02 5.08mm single row
+0
+2
+2
+Connector_Samtec_HPM_THT
+Samtec_HPM-03-01-x-S_Straight_1x03_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x03, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x03 5.08mm single row
+0
+3
+3
+Connector_Samtec_HPM_THT
+Samtec_HPM-03-05-x-S_Straight_1x03_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x03, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x03 5.08mm single row
+0
+3
+3
+Connector_Samtec_HPM_THT
+Samtec_HPM-04-01-x-S_Straight_1x04_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x04, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x04 5.08mm single row
+0
+4
+4
+Connector_Samtec_HPM_THT
+Samtec_HPM-04-05-x-S_Straight_1x04_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x04, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x04 5.08mm single row
+0
+4
+4
+Connector_Samtec_HPM_THT
+Samtec_HPM-05-01-x-S_Straight_1x05_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x05, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x05 5.08mm single row
+0
+5
+5
+Connector_Samtec_HPM_THT
+Samtec_HPM-05-05-x-S_Straight_1x05_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x05, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x05 5.08mm single row
+0
+5
+5
+Connector_Samtec_HPM_THT
+Samtec_HPM-06-01-x-S_Straight_1x06_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x06, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x06 5.08mm single row
+0
+6
+6
+Connector_Samtec_HPM_THT
+Samtec_HPM-06-05-x-S_Straight_1x06_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x06, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x06 5.08mm single row
+0
+6
+6
+Connector_Samtec_HPM_THT
+Samtec_HPM-07-01-x-S_Straight_1x07_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x07, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x07 5.08mm single row
+0
+7
+7
+Connector_Samtec_HPM_THT
+Samtec_HPM-07-05-x-S_Straight_1x07_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x07, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x07 5.08mm single row
+0
+7
+7
+Connector_Samtec_HPM_THT
+Samtec_HPM-08-01-x-S_Straight_1x08_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x08, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x08 5.08mm single row
+0
+8
+8
+Connector_Samtec_HPM_THT
+Samtec_HPM-08-05-x-S_Straight_1x08_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x08, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x08 5.08mm single row
+0
+8
+8
+Connector_Samtec_HPM_THT
+Samtec_HPM-09-01-x-S_Straight_1x09_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x09, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x09 5.08mm single row
+0
+9
+9
+Connector_Samtec_HPM_THT
+Samtec_HPM-09-05-x-S_Straight_1x09_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x09, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x09 5.08mm single row
+0
+9
+9
+Connector_Samtec_HPM_THT
+Samtec_HPM-10-01-x-S_Straight_1x10_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x10, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x10 5.08mm single row
+0
+10
+10
+Connector_Samtec_HPM_THT
+Samtec_HPM-10-05-x-S_Straight_1x10_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x10, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x10 5.08mm single row
+0
+10
+10
+Connector_Samtec_HPM_THT
+Samtec_HPM-11-01-x-S_Straight_1x11_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x11, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x11 5.08mm single row
+0
+11
+11
+Connector_Samtec_HPM_THT
+Samtec_HPM-11-05-x-S_Straight_1x11_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x11, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x11 5.08mm single row
+0
+11
+11
+Connector_Samtec_HPM_THT
+Samtec_HPM-12-01-x-S_Straight_1x12_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x12, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x12 5.08mm single row
+0
+12
+12
+Connector_Samtec_HPM_THT
+Samtec_HPM-12-05-x-S_Straight_1x12_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x12, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x12 5.08mm single row
+0
+12
+12
+Connector_Samtec_HPM_THT
+Samtec_HPM-13-01-x-S_Straight_1x13_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x13, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x13 5.08mm single row
+0
+13
+13
+Connector_Samtec_HPM_THT
+Samtec_HPM-13-05-x-S_Straight_1x13_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x13, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x13 5.08mm single row
+0
+13
+13
+Connector_Samtec_HPM_THT
+Samtec_HPM-14-01-x-S_Straight_1x14_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x14, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x14 5.08mm single row
+0
+14
+14
+Connector_Samtec_HPM_THT
+Samtec_HPM-14-05-x-S_Straight_1x14_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x14, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x14 5.08mm single row
+0
+14
+14
+Connector_Samtec_HPM_THT
+Samtec_HPM-15-01-x-S_Straight_1x15_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x15, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x15 5.08mm single row
+0
+15
+15
+Connector_Samtec_HPM_THT
+Samtec_HPM-15-05-x-S_Straight_1x15_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x15, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x15 5.08mm single row
+0
+15
+15
+Connector_Samtec_HPM_THT
+Samtec_HPM-16-01-x-S_Straight_1x16_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x16, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x16 5.08mm single row
+0
+16
+16
+Connector_Samtec_HPM_THT
+Samtec_HPM-16-05-x-S_Straight_1x16_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x16, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x16 5.08mm single row
+0
+16
+16
+Connector_Samtec_HPM_THT
+Samtec_HPM-17-01-x-S_Straight_1x17_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x17, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x17 5.08mm single row
+0
+17
+17
+Connector_Samtec_HPM_THT
+Samtec_HPM-17-05-x-S_Straight_1x17_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x17, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x17 5.08mm single row
+0
+17
+17
+Connector_Samtec_HPM_THT
+Samtec_HPM-18-01-x-S_Straight_1x18_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x18, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x18 5.08mm single row
+0
+18
+18
+Connector_Samtec_HPM_THT
+Samtec_HPM-18-05-x-S_Straight_1x18_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x18, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x18 5.08mm single row
+0
+18
+18
+Connector_Samtec_HPM_THT
+Samtec_HPM-19-01-x-S_Straight_1x19_Pitch5.08mm
+Through hole straight Samtec HPM power header series 11.94mm post length, 1x19, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 11.94mm post length THT 1x19 5.08mm single row
+0
+19
+19
+Connector_Samtec_HPM_THT
+Samtec_HPM-19-05-x-S_Straight_1x19_Pitch5.08mm
+Through hole straight Samtec HPM power header series 3.81mm post length, 1x19, 5.08mm pitch, single row
+Through hole Samtec HPM power header series 3.81mm post length THT 1x19 5.08mm single row
+0
+19
+19
+Connector_Samtec_HSEC8
+Samtec_HSEC8-109-01-X-DV-A-BL_2x09_P0.8mm_Pol04_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+18
+Connector_Samtec_HSEC8
+Samtec_HSEC8-109-01-X-DV-A-WT_2x09_P0.8mm_Pol04_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+18
+Connector_Samtec_HSEC8
+Samtec_HSEC8-109-X-X-DV-BL_2x09_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x9 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+18
+18
+Connector_Samtec_HSEC8
+Samtec_HSEC8-109-X-X-DV_2x09_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x9 contacts
+conn samtec card-edge high-speed
+0
+18
+18
+Connector_Samtec_HSEC8
+Samtec_HSEC8-109-X-X-DV_2x09_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x9 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+18
+18
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-01-X-DV-A-BL_2x10_P0.8mm_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+22
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-01-X-DV-A-WT_2x10_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+22
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-01-X-DV-A_2x10_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-01-X-DV_2x10_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-03-X-DV-A-WT_2x10_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+22
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-03-X-DV-A_2x10_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-03-X-DV_2x10_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-X-X-DV-BL_2x10_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x10 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-X-X-DV_2x10_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x10 contacts
+conn samtec card-edge high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-110-X-X-DV_2x10_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x10 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+20
+20
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-01-X-DV-A-BL_2x13_P0.8mm_Pol06_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+28
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-01-X-DV-A-WT_2x13_P0.8mm_Pol06_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+28
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-01-X-DV-A_2x13_P0.8mm_Pol06_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+26
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-01-X-DV_2x13_P0.8mm_Pol06_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+26
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-X-X-DV-BL_2x13_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x13 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+26
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-X-X-DV_2x13_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x13 contacts
+conn samtec card-edge high-speed
+0
+26
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-113-X-X-DV_2x13_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x13 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+26
+26
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-01-X-DV-A-BL_2x20_P0.8mm_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+42
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-01-X-DV-A-WT_2x20_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+42
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-01-X-DV-A_2x20_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-01-X-DV_2x20_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-03-X-DV-A-WT_2x20_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+42
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-03-X-DV-A_2x20_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-03-X-DV_2x20_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-X-X-DV-BL_2x20_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x20 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-X-X-DV_2x20_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x20 contacts
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-120-X-X-DV_2x20_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x20 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+40
+40
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-01-X-DV-A-BL_2x25_P0.8mm_Pol06_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+52
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-01-X-DV-A-WT_2x25_P0.8mm_Pol06_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+52
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-01-X-DV-A_2x25_P0.8mm_Pol06_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+50
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-01-X-DV_2x25_P0.8mm_Pol06_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+50
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-X-X-DV-BL_2x25_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x25 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+50
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-X-X-DV_2x25_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x25 contacts
+conn samtec card-edge high-speed
+0
+50
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-125-X-X-DV_2x25_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x25 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+50
+50
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-01-X-DV-A-BL_2x30_P0.8mm_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+62
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-01-X-DV-A-WT_2x30_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+62
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-01-X-DV-A_2x30_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-01-X-DV_2x30_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-03-X-DV-A-WT_2x30_P0.8mm_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+62
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-03-X-DV-A_2x30_P0.8mm_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-03-X-DV_2x30_P0.8mm_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-X-X-DV-BL_2x30_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x30 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-X-X-DV_2x30_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x30 contacts
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-130-X-X-DV_2x30_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x30 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+60
+60
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-01-X-DV-A-BL_2x37_P0.8mm_Pol21_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+76
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-01-X-DV-A-WT_2x37_P0.8mm_Pol21_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+76
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-01-X-DV-A_2x37_P0.8mm_Pol21_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+74
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-01-X-DV_2x37_P0.8mm_Pol21_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+74
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-X-X-DV-BL_2x37_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x37 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+74
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-X-X-DV_2x37_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x37 contacts
+conn samtec card-edge high-speed
+0
+74
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-137-X-X-DV_2x37_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x37 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+74
+74
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-01-X-DV-A-BL_2x40_P0.8mm_Pol22_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+82
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-01-X-DV-A-WT_2x40_P0.8mm_Pol22_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+82
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-01-X-DV-A_2x40_P0.8mm_Pol22_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-01-X-DV_2x40_P0.8mm_Pol22_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-03-X-DV-A-WT_2x40_P0.8mm_Pol22_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+82
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-03-X-DV-A_2x40_P0.8mm_Pol22_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-03-X-DV_2x40_P0.8mm_Pol22_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-X-X-DV-BL_2x40_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x40 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-X-X-DV_2x40_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x40 contacts
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-140-X-X-DV_2x40_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x40 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+80
+80
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-01-X-DV-A-BL_2x49_P0.8mm_Pol27_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-01-X-DV-A-WT_2x49_P0.8mm_Pol27_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-01-X-DV-A_2x49_P0.8mm_Pol27_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+98
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-01-X-DV_2x49_P0.8mm_Pol27_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+98
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-X-X-DV-BL_2x49_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x49 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-X-X-DV_2x49_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x49 contacts
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-149-X-X-DV_2x49_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x49 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+98
+98
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-01-X-DV-A-BL_2x50_P0.8mm_Pol27_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+102
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-01-X-DV-A-WT_2x50_P0.8mm_Pol27_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+102
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-01-X-DV-A_2x50_P0.8mm_Pol27_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-01-X-DV_2x50_P0.8mm_Pol27_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-03-X-DV-A-WT_2x50_P0.8mm_Pol27_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+102
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-03-X-DV-A_2x50_P0.8mm_Pol27_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-03-X-DV_2x50_P0.8mm_Pol27_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-X-X-DV-BL_2x50_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x50 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-X-X-DV_2x50_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x50 contacts
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-150-X-X-DV_2x50_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x50 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+100
+100
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-01-X-DV-A-BL_2x60_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+122
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-01-X-DV-A-WT_2x60_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+122
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-01-X-DV-A_2x60_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-01-X-DV_2x60_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-03-X-DV-A-WT_2x60_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+122
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-03-X-DV-A_2x60_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-03-X-DV_2x60_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-X-X-DV-BL_2x60_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x60 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-X-X-DV_2x60_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x60 contacts
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-160-X-X-DV_2x60_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x60 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+120
+120
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-01-X-DV-A-BL_2x70_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+142
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-01-X-DV-A-WT_2x70_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+142
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-01-X-DV-A_2x70_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-01-X-DV_2x70_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-03-X-DV-A-WT_2x70_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+142
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-03-X-DV-A_2x70_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-03-X-DV_2x70_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-X-X-DV-BL_2x70_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x70 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-X-X-DV_2x70_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x70 contacts
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-170-X-X-DV_2x70_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x70 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+140
+140
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-01-X-DV-A-BL_2x80_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+162
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-01-X-DV-A-WT_2x80_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+162
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-01-X-DV-A_2x80_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-01-X-DV_2x80_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-03-X-DV-A-WT_2x80_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+162
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-03-X-DV-A_2x80_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-03-X-DV_2x80_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-X-X-DV-BL_2x80_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x80 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-X-X-DV_2x80_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x80 contacts
+conn samtec card-edge high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-180-X-X-DV_2x80_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x80 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+160
+160
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-01-X-DV-A-BL_2x90_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+182
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-01-X-DV-A-WT_2x90_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+182
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-01-X-DV-A_2x90_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-01-X-DV_2x90_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-03-X-DV-A-WT_2x90_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+182
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-03-X-DV-A_2x90_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-03-X-DV_2x90_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-X-X-DV-BL_2x90_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x90 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-X-X-DV_2x90_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x90 contacts
+conn samtec card-edge high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-190-X-X-DV_2x90_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x90 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+180
+180
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-01-X-DV-A-BL_2x100_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+202
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-01-X-DV-A-WT_2x100_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+202
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-01-X-DV-A_2x100_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-01-X-DV_2x100_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-03-X-DV-A-WT_2x100_P0.8mm_Pol32_Socket_WeldTabs
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+202
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-03-X-DV-A_2x100_P0.8mm_Pol32_Socket_AlignmentPins
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-03-X-DV_2x100_P0.8mm_Pol32_Socket
+0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf)
+conn samtec card-edge socket high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-X-X-DV-BL_2x100_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x100 contacts (with board lock option)
+conn samtec card-edge high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-X-X-DV_2x100_P0.8mm_Edge
+Highspeed card edge for PCB's with 2x100 contacts
+conn samtec card-edge high-speed
+0
+200
+200
+Connector_Samtec_HSEC8
+Samtec_HSEC8-1100-X-X-DV_2x100_P0.8mm_Wing_Edge
+Highspeed card edge for PCB's with 2x100 contacts (with horizontal Edge.Cuts ends)
+conn samtec card-edge high-speed
+0
+200
+200
+Connector_Samtec_MicroMate
+Samtec_T1M-02-X-S-RA_1x02-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+4
+3
+Connector_Samtec_MicroMate
+Samtec_T1M-02-X-S-V_1x02-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+4
+3
+Connector_Samtec_MicroMate
+Samtec_T1M-02-X-SH-L_1x02-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+4
+3
+Connector_Samtec_MicroMate
+Samtec_T1M-02-X-SV-L_1x02-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+4
+3
+Connector_Samtec_MicroMate
+Samtec_T1M-03-X-S-RA_1x03-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+5
+4
+Connector_Samtec_MicroMate
+Samtec_T1M-03-X-S-V_1x03-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+5
+4
+Connector_Samtec_MicroMate
+Samtec_T1M-03-X-SH-L_1x03-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+5
+4
+Connector_Samtec_MicroMate
+Samtec_T1M-03-X-SV-L_1x03-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+5
+4
+Connector_Samtec_MicroMate
+Samtec_T1M-04-X-S-RA_1x04-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+6
+5
+Connector_Samtec_MicroMate
+Samtec_T1M-04-X-S-V_1x04-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+6
+5
+Connector_Samtec_MicroMate
+Samtec_T1M-04-X-SH-L_1x04-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+6
+5
+Connector_Samtec_MicroMate
+Samtec_T1M-04-X-SV-L_1x04-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+6
+5
+Connector_Samtec_MicroMate
+Samtec_T1M-05-X-S-RA_1x05-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+7
+6
+Connector_Samtec_MicroMate
+Samtec_T1M-05-X-S-V_1x05-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+7
+6
+Connector_Samtec_MicroMate
+Samtec_T1M-05-X-SH-L_1x05-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+7
+6
+Connector_Samtec_MicroMate
+Samtec_T1M-05-X-SV-L_1x05-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+7
+6
+Connector_Samtec_MicroMate
+Samtec_T1M-06-X-S-RA_1x06-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+8
+7
+Connector_Samtec_MicroMate
+Samtec_T1M-06-X-S-V_1x06-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+8
+7
+Connector_Samtec_MicroMate
+Samtec_T1M-06-X-SH-L_1x06-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+8
+7
+Connector_Samtec_MicroMate
+Samtec_T1M-06-X-SV-L_1x06-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+8
+7
+Connector_Samtec_MicroMate
+Samtec_T1M-07-X-S-RA_1x07-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+9
+8
+Connector_Samtec_MicroMate
+Samtec_T1M-07-X-S-V_1x07-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+9
+8
+Connector_Samtec_MicroMate
+Samtec_T1M-07-X-SH-L_1x07-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+9
+8
+Connector_Samtec_MicroMate
+Samtec_T1M-07-X-SV-L_1x07-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+9
+8
+Connector_Samtec_MicroMate
+Samtec_T1M-08-X-S-RA_1x08-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+10
+9
+Connector_Samtec_MicroMate
+Samtec_T1M-08-X-S-V_1x08-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+10
+9
+Connector_Samtec_MicroMate
+Samtec_T1M-08-X-SH-L_1x08-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+10
+9
+Connector_Samtec_MicroMate
+Samtec_T1M-08-X-SV-L_1x08-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+10
+9
+Connector_Samtec_MicroMate
+Samtec_T1M-09-X-S-RA_1x09-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+11
+10
+Connector_Samtec_MicroMate
+Samtec_T1M-09-X-S-V_1x09-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+11
+10
+Connector_Samtec_MicroMate
+Samtec_T1M-09-X-SH-L_1x09-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+11
+10
+Connector_Samtec_MicroMate
+Samtec_T1M-09-X-SV-L_1x09-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+11
+10
+Connector_Samtec_MicroMate
+Samtec_T1M-10-X-S-RA_1x10-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+12
+11
+Connector_Samtec_MicroMate
+Samtec_T1M-10-X-S-V_1x10-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+12
+11
+Connector_Samtec_MicroMate
+Samtec_T1M-10-X-SH-L_1x10-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+12
+11
+Connector_Samtec_MicroMate
+Samtec_T1M-10-X-SV-L_1x10-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+12
+11
+Connector_Samtec_MicroMate
+Samtec_T1M-11-X-S-RA_1x11-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+13
+12
+Connector_Samtec_MicroMate
+Samtec_T1M-11-X-S-V_1x11-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+13
+12
+Connector_Samtec_MicroMate
+Samtec_T1M-11-X-SH-L_1x11-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+13
+12
+Connector_Samtec_MicroMate
+Samtec_T1M-11-X-SV-L_1x11-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+13
+12
+Connector_Samtec_MicroMate
+Samtec_T1M-12-X-S-RA_1x12-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+14
+13
+Connector_Samtec_MicroMate
+Samtec_T1M-12-X-S-V_1x12-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+14
+13
+Connector_Samtec_MicroMate
+Samtec_T1M-12-X-SH-L_1x12-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+14
+13
+Connector_Samtec_MicroMate
+Samtec_T1M-12-X-SV-L_1x12-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+14
+13
+Connector_Samtec_MicroMate
+Samtec_T1M-13-X-S-RA_1x13-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+15
+14
+Connector_Samtec_MicroMate
+Samtec_T1M-13-X-S-V_1x13-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+15
+14
+Connector_Samtec_MicroMate
+Samtec_T1M-13-X-SH-L_1x13-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+15
+14
+Connector_Samtec_MicroMate
+Samtec_T1M-13-X-SV-L_1x13-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+15
+14
+Connector_Samtec_MicroMate
+Samtec_T1M-14-X-S-RA_1x14-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+16
+15
+Connector_Samtec_MicroMate
+Samtec_T1M-14-X-S-V_1x14-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+16
+15
+Connector_Samtec_MicroMate
+Samtec_T1M-14-X-SH-L_1x14-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+16
+15
+Connector_Samtec_MicroMate
+Samtec_T1M-14-X-SV-L_1x14-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+16
+15
+Connector_Samtec_MicroMate
+Samtec_T1M-15-X-S-RA_1x15-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+17
+16
+Connector_Samtec_MicroMate
+Samtec_T1M-15-X-S-V_1x15-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+17
+16
+Connector_Samtec_MicroMate
+Samtec_T1M-15-X-SH-L_1x15-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+17
+16
+Connector_Samtec_MicroMate
+Samtec_T1M-15-X-SV-L_1x15-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+17
+16
+Connector_Samtec_MicroMate
+Samtec_T1M-16-X-S-RA_1x16-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+18
+17
+Connector_Samtec_MicroMate
+Samtec_T1M-16-X-S-V_1x16-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+18
+17
+Connector_Samtec_MicroMate
+Samtec_T1M-16-X-SH-L_1x16-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+18
+17
+Connector_Samtec_MicroMate
+Samtec_T1M-16-X-SV-L_1x16-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+18
+17
+Connector_Samtec_MicroMate
+Samtec_T1M-17-X-S-RA_1x17-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+19
+18
+Connector_Samtec_MicroMate
+Samtec_T1M-17-X-S-V_1x17-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+19
+18
+Connector_Samtec_MicroMate
+Samtec_T1M-17-X-SH-L_1x17-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+19
+18
+Connector_Samtec_MicroMate
+Samtec_T1M-17-X-SV-L_1x17-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+19
+18
+Connector_Samtec_MicroMate
+Samtec_T1M-18-X-S-RA_1x18-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+20
+19
+Connector_Samtec_MicroMate
+Samtec_T1M-18-X-S-V_1x18-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+20
+19
+Connector_Samtec_MicroMate
+Samtec_T1M-18-X-SH-L_1x18-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+20
+19
+Connector_Samtec_MicroMate
+Samtec_T1M-18-X-SV-L_1x18-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+20
+19
+Connector_Samtec_MicroMate
+Samtec_T1M-19-X-S-RA_1x19-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+21
+20
+Connector_Samtec_MicroMate
+Samtec_T1M-19-X-S-V_1x19-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+21
+20
+Connector_Samtec_MicroMate
+Samtec_T1M-19-X-SH-L_1x19-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+21
+20
+Connector_Samtec_MicroMate
+Samtec_T1M-19-X-SV-L_1x19-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+21
+20
+Connector_Samtec_MicroMate
+Samtec_T1M-20-X-S-RA_1x20-1MP_P1.0mm_Terminal_Horizontal
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+22
+21
+Connector_Samtec_MicroMate
+Samtec_T1M-20-X-S-V_1x20-1MP_P1.0mm_Terminal_Vertical
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+22
+21
+Connector_Samtec_MicroMate
+Samtec_T1M-20-X-SH-L_1x20-1MP_P1.0mm_Terminal_Horizontal_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+22
+21
+Connector_Samtec_MicroMate
+Samtec_T1M-20-X-SV-L_1x20-1MP_P1.0mm_Terminal_Vertical_Latch
+Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf)
+conn samtec discrete wire terminal
+0
+22
+21
+Connector_Samtec_MicroPower
+Samtec_UMPS-02-XX.X-X-V-S-W_1x02-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+10
+3
+Connector_Samtec_MicroPower
+Samtec_UMPS-02-XX.X-X-V-S_1x02_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+2
+2
+Connector_Samtec_MicroPower
+Samtec_UMPS-03-XX.X-X-V-S-W_1x03-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+11
+4
+Connector_Samtec_MicroPower
+Samtec_UMPS-03-XX.X-X-V-S_1x03_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+3
+3
+Connector_Samtec_MicroPower
+Samtec_UMPS-04-XX.X-X-V-S-W_1x04-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+12
+5
+Connector_Samtec_MicroPower
+Samtec_UMPS-04-XX.X-X-V-S_1x04_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+4
+4
+Connector_Samtec_MicroPower
+Samtec_UMPS-05-XX.X-X-V-S-W_1x05-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+13
+6
+Connector_Samtec_MicroPower
+Samtec_UMPS-05-XX.X-X-V-S_1x05_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+5
+5
+Connector_Samtec_MicroPower
+Samtec_UMPS-06-XX.X-X-V-S-W_1x06-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+14
+7
+Connector_Samtec_MicroPower
+Samtec_UMPS-06-XX.X-X-V-S_1x06_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+6
+6
+Connector_Samtec_MicroPower
+Samtec_UMPS-07-XX.X-X-V-S-W_1x07-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+15
+8
+Connector_Samtec_MicroPower
+Samtec_UMPS-07-XX.X-X-V-S_1x07_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+7
+7
+Connector_Samtec_MicroPower
+Samtec_UMPS-08-XX.X-X-V-S-W_1x08-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+16
+9
+Connector_Samtec_MicroPower
+Samtec_UMPS-08-XX.X-X-V-S_1x08_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+8
+8
+Connector_Samtec_MicroPower
+Samtec_UMPS-09-XX.X-X-V-S-W_1x09-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+17
+10
+Connector_Samtec_MicroPower
+Samtec_UMPS-09-XX.X-X-V-S_1x09_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+9
+9
+Connector_Samtec_MicroPower
+Samtec_UMPS-10-XX.X-X-V-S-W_1x10-1MP_P2.0mm_Socket_WeldTab
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+18
+11
+Connector_Samtec_MicroPower
+Samtec_UMPS-10-XX.X-X-V-S_1x10_P2.0mm_Socket
+2.00 mm mPOWER Ultra Micro Power Socket (source: https://suddendocs.samtec.com/prints/umps-xx-xx.x-xx-v-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power socket
+0
+10
+10
+Connector_Samtec_MicroPower
+Samtec_UMPT-02-XX.X-X-V-S-W_1x02-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+10
+3
+Connector_Samtec_MicroPower
+Samtec_UMPT-02-XX.X-X-V-S_1x02_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+2
+2
+Connector_Samtec_MicroPower
+Samtec_UMPT-03-XX.X-X-V-S-W_1x03-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+11
+4
+Connector_Samtec_MicroPower
+Samtec_UMPT-03-XX.X-X-V-S_1x03_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+3
+3
+Connector_Samtec_MicroPower
+Samtec_UMPT-04-XX.X-X-V-S-W_1x04-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+12
+5
+Connector_Samtec_MicroPower
+Samtec_UMPT-04-XX.X-X-V-S_1x04_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+4
+4
+Connector_Samtec_MicroPower
+Samtec_UMPT-05-XX.X-X-V-S-W_1x05-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+13
+6
+Connector_Samtec_MicroPower
+Samtec_UMPT-05-XX.X-X-V-S_1x05_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+5
+5
+Connector_Samtec_MicroPower
+Samtec_UMPT-06-XX.X-X-V-S-W_1x06-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+14
+7
+Connector_Samtec_MicroPower
+Samtec_UMPT-06-XX.X-X-V-S_1x06_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+6
+6
+Connector_Samtec_MicroPower
+Samtec_UMPT-07-XX.X-X-V-S-W_1x07-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+15
+8
+Connector_Samtec_MicroPower
+Samtec_UMPT-07-XX.X-X-V-S_1x07_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+7
+7
+Connector_Samtec_MicroPower
+Samtec_UMPT-08-XX.X-X-V-S-W_1x08-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+16
+9
+Connector_Samtec_MicroPower
+Samtec_UMPT-08-XX.X-X-V-S_1x08_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+8
+8
+Connector_Samtec_MicroPower
+Samtec_UMPT-09-XX.X-X-V-S-W_1x09-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+17
+10
+Connector_Samtec_MicroPower
+Samtec_UMPT-09-XX.X-X-V-S_1x09_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+9
+9
+Connector_Samtec_MicroPower
+Samtec_UMPT-10-XX.X-X-V-S-W_1x10-1MP_P2.0mm_Terminal_WeldTab
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+18
+11
+Connector_Samtec_MicroPower
+Samtec_UMPT-10-XX.X-X-V-S_1x10_P2.0mm_Terminal
+2.00 mm mPOWER Ultra Micro Power Terminal, Vertical (source: https://suddendocs.samtec.com/prints/umpt-xx-xx.x-xx-v-x-x-x-x-xr-footprint.pdf)
+conn samtec ultra-mirco-power terminal
+0
+10
+10
+Connector_Stocko
+Stocko_MKS_1651-6-0-202_1x2_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+2
+2
+Connector_Stocko
+Stocko_MKS_1652-6-0-202_1x2_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+2
+2
+Connector_Stocko
+Stocko_MKS_1653-6-0-303_1x3_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+3
+3
+Connector_Stocko
+Stocko_MKS_1654-6-0-404_1x4_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+4
+4
+Connector_Stocko
+Stocko_MKS_1655-6-0-505_1x5_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+5
+5
+Connector_Stocko
+Stocko_MKS_1656-6-0-606_1x6_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+6
+6
+Connector_Stocko
+Stocko_MKS_1657-6-0-707_1x7_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+7
+7
+Connector_Stocko
+Stocko_MKS_1658-6-0-808_1x8_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+8
+8
+Connector_Stocko
+Stocko_MKS_1659-6-0-909_1x9_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+9
+9
+Connector_Stocko
+Stocko_MKS_1660-6-0-1010_1x10_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+10
+10
+Connector_Stocko
+Stocko_MKS_1661-6-0-1111_1x11_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+11
+11
+Connector_Stocko
+Stocko_MKS_1662-6-0-1212_1x12_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+12
+12
+Connector_Stocko
+Stocko_MKS_1663-6-0-1313_1x13_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+13
+13
+Connector_Stocko
+Stocko_MKS_1664-6-0-1414_1x14_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+14
+14
+Connector_Stocko
+Stocko_MKS_1665-6-0-1515_1x15_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+15
+15
+Connector_Stocko
+Stocko_MKS_1666-6-0-1616_1x16_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+16
+16
+Connector_Stocko
+Stocko_MKS_1667-6-0-1717_1x17_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+17
+17
+Connector_Stocko
+Stocko_MKS_1668-6-0-1818_1x18_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+18
+18
+Connector_Stocko
+Stocko_MKS_1669-6-0-1919_1x19_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+19
+19
+Connector_Stocko
+Stocko_MKS_1670-6-0-2020_1x20_P2.50mm_Vertical
+Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator
+Stocko RFK MKS 16xx
+0
+20
+20
+Connector_TE-Connectivity
+TE_1-826576-3_1x13_P3.96mm_Vertical
+TE, 1-826576-3, 13 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+13
+13
+Connector_TE-Connectivity
+TE_1-826576-5_1x15_P3.96mm_Vertical
+TE, 1-826576-5, 15 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+15
+15
+Connector_TE-Connectivity
+TE_1-826576-6_1x16_P3.96mm_Vertical
+TE, 1-826576-6, 16 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+16
+16
+Connector_TE-Connectivity
+TE_1-826576-7_1x17_P3.96mm_Vertical
+TE, 1-826576-7, 17 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+17
+17
+Connector_TE-Connectivity
+TE_1-826576-8_1x18_P3.96mm_Vertical
+TE, 1-826576-8, 18 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+18
+18
+Connector_TE-Connectivity
+TE_2-826576-0_1x20_P3.96mm_Vertical
+TE, 2-826576-0, 20 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+20
+20
+Connector_TE-Connectivity
+TE_3-826576-6_1x36_P3.96mm_Vertical
+TE, 3-826576-6, 36 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+36
+36
+Connector_TE-Connectivity
+TE_440054-2_1x02_P2.00mm_Vertical
+TE Connectivity, HDI, Wire-to-Board, Fully Shrouded, Vertical Header: https://www.te.com/usa-en/product-440054-2.datasheet.pdf
+connector header hdr horizontal vertical shrouded fully-shrounded 440054-2 2-440054-2 4-440054-2 6-440054-2 2-440054-6 4-440054-6 6-440054-6
+0
+2
+2
+Connector_TE-Connectivity
+TE_440055-2_1x02_P2.00mm_Horizontal
+TE Connectivity, HDI, Wire-to-Board, Fully Shrouded, Header: https://www.te.com/usa-en/product-440055-2.datasheet.pdf
+connector header hdr horizontal right-angle shrouded fully-shrounded 440055-2 2-440055-2 4-440055-2 6-440055-2 8-440055-2
+0
+2
+2
+Connector_TE-Connectivity
+TE_826576-2_1x02_P3.96mm_Vertical
+TE, 826576-2, 2 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+2
+2
+Connector_TE-Connectivity
+TE_826576-3_1x03_P3.96mm_Vertical
+TE, 826576-3, 3 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+3
+3
+Connector_TE-Connectivity
+TE_826576-5_1x05_P3.96mm_Vertical
+TE, 826576-5, 5 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+5
+5
+Connector_TE-Connectivity
+TE_826576-6_1x06_P3.96mm_Vertical
+TE, 826576-6, 6 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+6
+6
+Connector_TE-Connectivity
+TE_826576-7_1x07_P3.96mm_Vertical
+TE, 826576-7, 7 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+7
+7
+Connector_TE-Connectivity
+TE_826576-8_1x08_P3.96mm_Vertical
+TE, 826576-8, 8 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+8
+8
+Connector_TE-Connectivity
+TE_826576-9_1x09_P3.96mm_Vertical
+TE, 826576-9, 9 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator
+connector TE 826576 vertical
+0
+9
+9
+Connector_TE-Connectivity
+TE_2834006-1_1x01_P4.0mm_Horizontal
+TE Connectivity Buchanan WireMate connector, Poke-In series, 1-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1
+wire connector
+0
+2
+1
+Connector_TE-Connectivity
+TE_2834006-2_1x02_P4.0mm_Horizontal
+TE Connectivity Buchanan WireMate connector, Poke-In series, 2-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1
+wire connector
+0
+4
+2
+Connector_TE-Connectivity
+TE_2834006-3_1x03_P4.0mm_Horizontal
+TE Connectivity Buchanan WireMate connector, Poke-In series, 3-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1
+wire connector
+0
+6
+3
+Connector_TE-Connectivity
+TE_2834006-4_1x04_P4.0mm_Horizontal
+TE Connectivity Buchanan WireMate connector, Poke-In series, 4-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1
+wire connector
+0
+8
+4
+Connector_TE-Connectivity
+TE_2834006-5_1x05_P4.0mm_Horizontal
+TE Connectivity Buchanan WireMate connector, Poke-In series, 5-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1
+wire connector
+0
+10
+5
+Connector_TE-Connectivity
+TE_5767171-1_2x19_P0.635mm_Vertical
+PCB Mount Receptacle, Vertical, Board-to-Board, 38 Position, 24.003mm / .64mm [.945in] Centerline, Header Only, Palladium Nickel (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F5767171%7FB2%7Fpdf%7FEnglish%7FENG_CD_5767171_B2.pdf%7F5767171-1#page=2)
+mictor38 receptacle board-to-board
+0
+43
+39
+Connector_TE-Connectivity
+TE_AMPSEAL_1-776087-x_3Rows_23_P0.4mm_Horizontal
+Connector
+TE 776087
+0
+23
+23
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770182-x_3x03_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770182-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+9
+9
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770186-x_3x04_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770186-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+12
+12
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770190-x_3x05_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770190-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+15
+15
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770621-x_2x06_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770621-x, 6 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+12
+12
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770858-x_2x05_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770858-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+10
+10
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770866-x_1x02_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770866-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+2
+2
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770870-x_1x03_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770870-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+3
+3
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770874-x_2x02_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770874-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+4
+4
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770875-x_2x03_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770875-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+6
+6
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770966-x_1x02_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770966-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+2
+2
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770967-x_1x03_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770967-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+3
+3
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770968-x_2x02_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770968-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+4
+4
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770969-x_2x03_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770969-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+6
+6
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770970-x_2x04_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770970-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+8
+8
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770971-x_2x05_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770971-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+10
+10
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770972-x_2x06_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770972-x, 6 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+12
+12
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770973-x_2x07_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770973-x, 7 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+14
+14
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-770974-x_2x08_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770974-x, 8 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+16
+16
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794067-x_2x07_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794067-x, 7 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+14
+14
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794068-x_2x08_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794068-x, 8 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+16
+16
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794069-x_2x09_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794069-x, 9 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+18
+18
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794070-x_2x10_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794070-x, 10 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+20
+20
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794071-x_2x11_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794071-x, 11 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+22
+22
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794072-x_2x12_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794072-x, 12 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+24
+24
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794073-x_2x04_P4.14mm_Vertical
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794073-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK vertical
+0
+8
+8
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794105-x_2x09_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794105-x, 9 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+18
+18
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794106-x_2x10_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794106-x, 10 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+20
+20
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794107-x_2x11_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794107-x, 11 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+22
+22
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794108-x_2x12_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794108-x, 12 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+24
+24
+Connector_TE-Connectivity
+TE_MATE-N-LOK_1-794374-x_1x01_P4.14mm_Horizontal
+Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794374-x, 1 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator
+connector TE MATE-N-LOK horizontal
+0
+1
+1
+Connector_TE-Connectivity
+TE_MATE-N-LOK_350211-1_1x04_P5.08mm_Vertical
+https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F350211%7FU5%7Fpdf%7FEnglish%7FENG_CD_350211_U5.pdf%7F350211-1
+connector TE MATE-N-LOK top entry ATA PATA IDE 5.25 inch floppy drive power
+0
+4
+4
+Connector_TE-Connectivity
+TE_Micro-MaTch_1-215079-0_2x05_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 10 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 1-215079-0 8-215079-10
+0
+10
+10
+Connector_TE-Connectivity
+TE_Micro-MaTch_1-215079-2_2x06_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 12 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 1-215079-2 8-215079-12
+0
+12
+12
+Connector_TE-Connectivity
+TE_Micro-MaTch_1-215079-4_2x07_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 14 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 1-215079-4 8-215079-14
+0
+14
+14
+Connector_TE-Connectivity
+TE_Micro-MaTch_1-215079-6_2x08_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 16 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 1-215079-6 8-215079-16
+0
+16
+16
+Connector_TE-Connectivity
+TE_Micro-MaTch_1-215079-8_2x09_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 18 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 1-215079-8 8-215079-18
+0
+18
+18
+Connector_TE-Connectivity
+TE_Micro-MaTch_2-215079-0_2x10_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 20 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 2-215079-0 9-215079-20
+0
+20
+20
+Connector_TE-Connectivity
+TE_Micro-MaTch_215079-4_2x02_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 4 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 215079-4 7-215079-4
+0
+4
+4
+Connector_TE-Connectivity
+TE_Micro-MaTch_215079-6_2x03_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 6 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 215079-6 7-215079-6
+0
+6
+6
+Connector_TE-Connectivity
+TE_Micro-MaTch_215079-8_2x04_P1.27mm_Vertical
+TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 8 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4
+connector TE-Connectivity Micro-MaTch Vertical 215079-8 7-215079-8
+0
+8
+8
+Connector_TE-Connectivity
+TE_T4041037031-000_M8_03_Socket_Straight
+Shielded M8 socket 3 ways connector panel, straight and rear mount (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7FT404103010X000%7FA%7Fpdf%7FEnglish%7FENG_CD_T404103010X000_A.pdf%7FT4041037041-000)
+three-pin M8
+0
+5
+4
+Connector_TE-Connectivity
+TE_T4041037041-000_M8_04_Socket_Straight
+Shielded M8 socket 4 ways connector panel, straight and rear mount (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7FT404103010X000%7FA%7Fpdf%7FEnglish%7FENG_CD_T404103010X000_A.pdf%7FT4041037041-000)
+four-pin M8
+0
+6
+5
+Connector_USB
+USB3_A_Molex_48393-001
+USB 3.0, type A, right angle, http://www.molex.com/pdm_docs/sd/483930003_sd.pdf
+USB 3.0 type A right angle
+0
+13
+10
+Connector_USB
+USB3_A_Molex_48406-0001_Horizontal_Stacked
+USB 3.0, type A, right angle, stacked (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/484/48406/484060001_sd.pdf)
+USB 3.0 type A right angle stacked dual
+0
+22
+19
+Connector_USB
+USB3_A_Plug_Wuerth_692112030100_Horizontal
+USB 3.0 Type A SMT Plug, Horizontal, https://www.we-online.com/components/products/datasheet/692112030100.pdf
+usb A plug horizontal
+0
+11
+10
+Connector_USB
+USB3_A_Receptacle_Wuerth_692122030100
+USB 3.0, type A, right angle (https://www.we-online.com/katalog/datasheet/692122030100.pdf)
+USB 3.0 type A right angle Würth
+0
+11
+10
+Connector_USB
+USB3_Micro-B_Connfly_DS1104-01
+Micro USB B receptable with flange, bottom-mount, SMD, right-angle (http://en.connfly.com/static/upload/file/pdf/DS1104-01.pdf)
+USB 3.0 Micro B SMD right angle
+0
+16
+11
+Connector_USB
+USB_A_CNCTech_1001-011-01101_Horizontal
+USB type A Plug, Horizontal, http://cnctech.us/pdfs/1001-011-01101.pdf
+USB-A
+0
+6
+5
+Connector_USB
+USB_A_CUI_UJ2-ADH-TH_Horizontal_Stacked
+USB-A two stacked horizontal receptacle, through-hole (https://www.cuidevices.com/product/resource/uj2-adh-th.pdf)
+USB-A CUI stacked horizontal through-hole
+0
+12
+9
+Connector_USB
+USB_A_Connfly_DS1095
+USB type A receptacle, THT, horizontal, https://en.connfly.com/static/upload/file/DS1095.pdf
+Connfly female socket through-hole
+0
+6
+5
+Connector_USB
+USB_A_Connfly_DS1098_Horizontal
+USB type A Plug, Horizontal, https://en.connfly.com/static/upload/file//DS1098.pdf
+USB-A
+0
+6
+5
+Connector_USB
+USB_A_Kycon_KUSBX-AS1N-B_Horizontal
+Kycon, USB-A receptacle, through-hole, https://www.kycon.com/Catalog_PDF/KUSBX.pdf'
+USB-A receptacle horizontal THT
+0
+6
+5
+Connector_USB
+USB_A_Molex_48037-2200_Horizontal
+USB type A Plug, Horizontal, https://www.molex.com/pdm_docs/sd/480372200_sd.pdf
+USB-A
+0
+6
+5
+Connector_USB
+USB_A_Molex_67643_Horizontal
+USB type A, Horizontal, https://www.molex.com/pdm_docs/sd/676433910_sd.pdf
+USB_A Female Connector receptacle
+0
+6
+5
+Connector_USB
+USB_A_Molex_105057_Vertical
+https://www.molex.com/pdm_docs/sd/1050570001_sd.pdf
+USB A Vertical
+0
+7
+5
+Connector_USB
+USB_A_Receptacle_GCT_USB1046
+GCT USB1046, USB Type A, https://gct.co/files/drawings/usb1046.pdf
+USB SMD Type-A Receptacle Right Angle
+0
+8
+5
+Connector_USB
+USB_A_Receptacle_XKB_U231-091N-4BLRA00-S
+USB 3.0 Type A, right-angle, SMT, https://datasheet.lcsc.com/lcsc/2110100130_XKB-Connectivity-U231-091N-4BLRA00-S_C2880618.pdf
+USB A Type-A Receptacle SMD
+0
+13
+10
+Connector_USB
+USB_A_Stewart_SS-52100-001_Horizontal
+USB A connector https://belfuse.com/resources/drawings/stewartconnector/dr-stw-ss-52100-001.pdf
+USB_A Female Connector receptacle
+0
+6
+5
+Connector_USB
+USB_A_TE_292303-7_Horizontal
+USB type A, Horizontal, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=292303&DocType=Customer+Drawing&DocLang=English
+USB_A Female Connector receptacle
+0
+6
+5
+Connector_USB
+USB_A_Wuerth_614004134726_Horizontal
+USB A connector https://www.we-online.com/catalog/datasheet/614004134726.pdf
+USB_A Female Connector receptacle
+0
+8
+5
+Connector_USB
+USB_A_Wuerth_61400826021_Horizontal_Stacked
+Stacked USB A connector http://katalog.we-online.de/em/datasheet/61400826021.pdf
+Wuerth stacked USB_A
+0
+12
+9
+Connector_USB
+USB_B_Amphenol_MUSB-D511_Vertical_Rugged
+A,phenol MUSB_D511, USB B female connector, straight, rugged, https://www.amphenolcanada.com/ProductSearch/drawings/AC/MUSBD511XX.pdf
+USB_B_MUSB_Straight female connector straight rugged MUSB D511
+0
+6
+5
+Connector_USB
+USB_B_Lumberg_2411_02_Horizontal
+USB 2.0 receptacle type B, horizontal version, through-hole, https://downloads.lumberg.com/datenblaetter/en/2411_02.pdf
+USB B receptacle horizontal through-hole
+0
+6
+5
+Connector_USB
+USB_B_OST_USB-B1HSxx_Horizontal
+USB B receptacle, Horizontal, through-hole, http://www.on-shore.com/wp-content/uploads/2015/09/usb-b1hsxx.pdf
+USB-B receptacle horizontal through-hole
+0
+6
+5
+Connector_USB
+USB_B_TE_5787834_Vertical
+http://www.mouser.com/ds/2/418/NG_CD_5787834_A4-669110.pdf
+USB_B USB B vertical female connector
+0
+6
+5
+Connector_USB
+USB_C_Plug_JAE_DX07P024AJ1
+Universal Serial Bus (USB) Shielded I/O Plug, Type C, Right Angle, Surface Mount, https://www.jae.com/en/searchfilter/?topics_keyword=DX07P024AJ1&mainItemSelect=1
+USB Type-C Plug Edge Mount
+0
+30
+25
+Connector_USB
+USB_C_Plug_Molex_105444
+Universal Serial Bus (USB) Shielded I/O Plug, Type C, Right Angle, Surface Mount, http://www.molex.com/pdm_docs/sd/1054440001_sd.pdf
+USB Type-C Plug Edge Mount
+0
+24
+23
+Connector_USB
+USB_C_Plug_ShenzhenJingTuoJin_918-118A2021Y40002_Vertical
+Low-profile vertical USB 2.0 Type C Plug Shenzhen Jing Tuo Jin Electronics Co 918-118A2021Y40002 ( https://datasheet.lcsc.com/lcsc/1912111437_Jing-Extension-of-the-Electronic-Co--918-118A2021Y40002_C399939.pdf ) also compatible with Korean HRO Parts Elec TYPE-C-31-G-06
+type-c usb2
+0
+18
+17
+Connector_USB
+USB_C_Receptacle_Amphenol_124019772112A
+USB TYPE C Receptacle, USB2.0, Waterproof, Dual Row SMT, IPX8, https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/c12401977-3.pdf
+USB C Type-C Waterproof
+0
+22
+17
+Connector_USB
+USB_C_Receptacle_Amphenol_12401548E4-2A
+USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A
+USB C Type-C Receptacle Hybrid
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Amphenol_12401548E4-2A_CircularHoles
+USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A
+USB C Type-C Receptacle Hybrid
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Amphenol_12401610E4-2A
+USB TYPE C, RA RCPT PCB, SMT, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401610E4%7e2A
+USB C Type-C Receptacle SMD
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles
+USB TYPE C, RA RCPT PCB, SMT, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401610E4%7e2A
+USB C Type-C Receptacle SMD
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Amphenol_12401948E412A
+USB TYPE C, USB 2.0, SMT, https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/c12401948.pdf
+Amphenol
+0
+20
+16
+Connector_USB
+USB_C_Receptacle_CNCTech_C-ARA1-AK51X
+USB Type-C 3.0 Receptacle, 24-pin, right angle (source: https://www.cnctech.us/pdfs/C-ARA1-AK512.pdf)
+USB C Type-C Receptacle Hybrid CNCTech C-ARA1-AK51X
+0
+32
+25
+Connector_USB
+USB_C_Receptacle_G-Switch_GT-USB-7010ASV
+USB Type C, right-angle, SMT, https://datasheet.lcsc.com/lcsc/2204071530_G-Switch-GT-USB-7010ASV_C2988369.pdf
+USB C Type-C Receptacle SMD
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_G-Switch_GT-USB-7025
+USB Type C, right-angle, SMT, https://www.lcsc.com/datasheet/lcsc_datasheet_2312191005_G-Switch-GT-USB-7025_C963213.pdf
+USB C Type-C Receptacle SMD
+0
+22
+18
+Connector_USB
+USB_C_Receptacle_G-Switch_GT-USB-7051x
+USB Type C, vertical, SMT, https://datasheet.lcsc.com/lcsc/2108072030_G-Switch-GT-USB-7051A_C2843970.pdf
+USB C Type-C Receptacle SMD GT-USB-7051A GT-USB-7051B
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_GCT_USB4085
+USB 2.0 Type C Receptacle, https://gct.co/Files/Drawings/USB4085.pdf
+USB Type-C Receptacle Through-hole Right angle
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal
+USB 2.0 Type C Receptacle, GCT, 16P, top mounted, horizontal, 5A: https://gct.co/files/drawings/usb4105.pdf
+USB C Type-C Receptacle SMD USB 2.0 16P 16C USB4105-15-A USB4105-15-A-060 USB4105-15-A-120 USB4105-GF-A USB4105-GF-A-060 USB4105-GF-A-120
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_GCT_USB4110
+USB 2.0 Type C Receptacle, GCT, 16P, top mounted, horizontal, 5A, https://gct.co/files/drawings/usb4110.pdf
+USB 2.0 C Type-C Receptacle SMD 16P 16C USB4110-GF-A
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_GCT_USB4115-03-C
+USB TYPE C, VERT RCPT PCB, SMT, https://gct.co/files/drawings/usb4115.pdf
+USB C Type-C Receptacle SMD
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal
+USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A, 1.9mm stake: https://gct.co/files/drawings/usb4125.pdf
+USB C Type-C receptacle power-only charging-only 6P 6C right angled
+0
+10
+7
+Connector_USB
+USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal
+USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A, 1mm stake: https://gct.co/files/drawings/usb4125.pdf
+USB C Type-C receptacle power-only charging-only 6P 6C right angled
+0
+10
+7
+Connector_USB
+USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal
+USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A: https://gct.co/files/drawings/usb4135.pdf
+USB C Type-C Receptacle SMD USB Power-only Charging-only 6P 6C USB4135-GF-A
+0
+10
+7
+Connector_USB
+USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A
+16-pin USB-C receptacle, USB2.0 and PD, 5A VBUS rating, https://datasheet.lcsc.com/lcsc/2211161000_HCTL-HC-TYPE-C-16P-01A_C2894897.pdf
+usb usb-c 2.0 pd
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_HRO_TYPE-C-31-M-12
+USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf
+usb usb-c 2.0 pd
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_HRO_TYPE-C-31-M-17
+USB Type-C receptacle for USB 2.0, 6 pin, https://omo-oss-file.thefastfile.com/portal-saas/new2023011311465142457/cms/file/134891b2-9b01-4104-89d3-96207243f692.pdf
+usb usb-c 2.0 pd
+0
+10
+7
+Connector_USB
+USB_C_Receptacle_JAE_DX07S016JA1R1500
+USB TYPE C, USB 2.0, SMT, https://www.jae.com/en/connectors/series/detail/product/id=91780
+USB C Type-C Receptacle SMD USB 2.0
+0
+22
+17
+Connector_USB
+USB_C_Receptacle_JAE_DX07S024WJ1R350
+http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ117219.pdf
+USB C Type-C Receptacle SMD
+0
+30
+25
+Connector_USB
+USB_C_Receptacle_JAE_DX07S024WJ3R400
+USB TYPE C, VERT RCPT PCB, SMT, http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ117928.pdf
+USB C Type-C Receptacle SMD
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Molex_105450-0101
+USB 3.0 3.1 3.2 4.0 Type-C receptable, through-hole mount, SMD, right-angle (https://www.molex.com/pdm_docs/sd/1054500101_sd.pdf)
+USB C Type-C USB3 receptacle SMD
+0
+28
+25
+Connector_USB
+USB_C_Receptacle_Palconn_UTC16-G
+http://www.palpilot.com/wp-content/uploads/2017/05/UTC027-GKN-OR-Rev-A.pdf
+USB C Type-C Receptacle USB2.0
+0
+20
+17
+Connector_USB
+USB_C_Receptacle_XKB_U262-16XN-4BVC11
+USB Type C, right-angle, SMT, https://datasheet.lcsc.com/szlcsc/1811141824_XKB-Enterprise-U262-161N-4BVC11_C319148.pdf
+USB C Type-C Receptacle SMD
+0
+20
+17
+Connector_USB
+USB_Micro-AB_Molex_47590-0001
+Micro USB AB receptacle, right-angle inverted (https://www.molex.com/pdm_docs/sd/475900001_sd.pdf)
+Micro AB USB SMD
+0
+14
+6
+Connector_USB
+USB_Micro-B_Amphenol_10103594-0001LF_Horizontal
+Micro USB Type B 10103594-0001LF, http://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10103594.pdf
+USB USB_B USB_micro USB_OTG
+0
+17
+6
+Connector_USB
+USB_Micro-B_Amphenol_10104110_Horizontal
+USB Micro-B, horizontal, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10104110.pdf
+USB Micro B horizontal
+0
+9
+6
+Connector_USB
+USB_Micro-B_Amphenol_10118193-0001LF_Horizontal
+USB Micro-B receptacle, horizontal, SMD, 10118193, with flange, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118193.pdf
+USB Micro-B horizontal SMD
+0
+11
+6
+Connector_USB
+USB_Micro-B_Amphenol_10118193-0002LF_Horizontal
+USB Micro-B receptacle, horizontal, SMD, 10118193, without flange, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118193.pdf
+USB Micro-B horizontal SMD
+0
+11
+6
+Connector_USB
+USB_Micro-B_Amphenol_10118194-0001LF_Horizontal
+USB Micro-B receptacle, horizontal, SMD, 10118194, 10118194-0001LF, 10118194-0002LF, 10118194-0101LF, 10118194-1001LF, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118194.pdf
+USB Micro B horizontal SMD
+0
+17
+6
+Connector_USB
+USB_Micro-B_Amphenol_10118194_Horizontal
+USB Micro-B receptacle, horizontal, SMD, 10118194, 10118194-0011LF, 10118194-0012LF, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118194.pdf
+USB Micro B horizontal SMD
+0
+17
+6
+Connector_USB
+USB_Micro-B_GCT_USB3076-30-A
+GCT Micro USB https://gct.co/files/drawings/usb3076.pdf
+Micro-USB SMD Typ-B GCT
+0
+11
+6
+Connector_USB
+USB_Micro-B_Molex-105017-0001
+http://www.molex.com/pdm_docs/sd/1050170001_sd.pdf
+Micro-USB SMD Typ-B
+0
+13
+6
+Connector_USB
+USB_Micro-B_Molex-105133-0001
+Molex Vertical Micro USB Typ-B (http://www.molex.com/pdm_docs/sd/1051330001_sd.pdf)
+Micro-USB SMD Typ-B Vertical
+0
+8
+6
+Connector_USB
+USB_Micro-B_Molex-105133-0031
+Molex Vertical Micro USB Typ-B (http://www.molex.com/pdm_docs/sd/1051330031_sd.pdf)
+Micro-USB SMD Typ-B Vertical
+0
+8
+6
+Connector_USB
+USB_Micro-B_Molex_47346-0001
+Micro USB B receptable with flange, bottom-mount, SMD, right-angle (http://www.molex.com/pdm_docs/sd/473460001_sd.pdf)
+Micro B USB SMD
+0
+11
+6
+Connector_USB
+USB_Micro-B_Technik_TWP-4002D-H3
+Dustproof Micro USB Type B TWP-4002D-H3, https://www.technik.com.hk/images/pdf_product/WP4002D-H3-A_2.0.pdf
+USB Micro B horizontal dustproof waterproof IP67
+0
+7
+6
+Connector_USB
+USB_Micro-B_Wuerth_614105150721_Vertical
+USB Micro-B receptacle, through-hole, vertical, http://katalog.we-online.de/em/datasheet/614105150721.pdf
+usb micro receptacle vertical
+0
+7
+6
+Connector_USB
+USB_Micro-B_Wuerth_614105150721_Vertical_CircularHoles
+USB Micro-B receptacle, through-hole, vertical, http://katalog.we-online.de/em/datasheet/614105150721.pdf
+usb micro receptacle vertical
+0
+7
+6
+Connector_USB
+USB_Micro-B_Wuerth_629105150521
+USB Micro-B receptacle, http://www.mouser.com/ds/2/445/629105150521-469306.pdf
+usb micro receptacle
+0
+9
+6
+Connector_USB
+USB_Micro-B_Wuerth_629105150521_CircularHoles
+USB Micro-B receptacle, http://www.mouser.com/ds/2/445/629105150521-469306.pdf
+usb micro receptacle
+0
+9
+6
+Connector_USB
+USB_Micro-B_XKB_U254-051T-4BH83-F1S
+XKB Connectivity, USB Micro-B, right-angle, SMT, https://datasheet.lcsc.com/lcsc/2206091745_XKB-Connectivity-U254-051T-4BH83-F1S_C397452.pdf
+USB Micro-B Receptacle SMD
+0
+11
+6
+Connector_USB
+USB_Mini-B_AdamTech_MUSB-B5-S-VT-TSMT-1_SMD_Vertical
+http://www.adam-tech.com/upload/MUSB-B5-S-VT-TSMT-1.pdf
+USB Mini-B
+0
+7
+6
+Connector_USB
+USB_Mini-B_Lumberg_2486_01_Horizontal
+USB Mini-B 5-pin SMD connector, http://downloads.lumberg.com/datenblaetter/en/2486_01.pdf
+USB USB_B USB_Mini connector
+0
+9
+6
+Connector_USB
+USB_Mini-B_Tensility_54-00023_Vertical
+http://www.tensility.com/pdffiles/54-00023.pdf
+usb mini receptacle vertical
+0
+7
+6
+Connector_USB
+USB_Mini-B_Tensility_54-00023_Vertical_CircularHoles
+http://www.tensility.com/pdffiles/54-00023.pdf
+usb mini receptacle vertical
+0
+7
+6
+Connector_USB
+USB_Mini-B_Wuerth_65100516121_Horizontal
+Mini USB 2.0 Type B SMT Horizontal 5 Contacts (https://katalog.we-online.de/em/datasheet/65100516121.pdf)
+Mini USB 2.0 Type B
+0
+9
+6
+Connector_Video
+DVI-D_Molex_74320-4004_Horizontal
+DVI-D Dual Link connector, horizontal, 24 pins, Molex P/N 74320-4004, https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/743/74320/743204004_sd.pdf?inline
+dvi right angle
+0
+26
+25
+Connector_Video
+DVI-I_Molex_74320-1004_Horizontal
+DVI-I Dual Link connector, horizontal, 29 pins, Molex P/N 74320-1004, https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/743/74320/743201004_sd.pdf?inline
+dvi right angle
+0
+32
+30
+Connector_Video
+HDMI_A_Amphenol_10029449-x01xLF_Horizontal
+HDMI Type A connector, Amphenol 10029449-001TLF 10029449-001RLF 10029449-101TLF 10029449-101RLF, Right Angle(https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10029449.pdf)
+hdmi right angle
+0
+23
+20
+Connector_Video
+HDMI_A_Contact_Technology_HDMI-19APL2_Horizontal
+HDMI Contact Technology Type A http://www.contactswitch.com/en/download.aspx?id=1449
+HDMI Contact Technology Type A
+0
+23
+20
+Connector_Video
+HDMI_A_Kycon_KDMIX-SL1-NS-WS-B15_VerticalRightAngle
+HDMI, Type A, Kycon KDMIX-SL1-NS-WS-B15, Vertical Right Angle, http://www.kycon.com/Pub_Eng_Draw/KDMIX-SL1-NS-WS-B15.pdf
+hdmi type a
+0
+23
+20
+Connector_Video
+HDMI_A_Molex_208658-1001_Horizontal
+HDMI Molex Type A https://www.molex.com/pdm_docs/sd/2086581001_sd.pdf
+HDMI Molex Type A
+0
+23
+20
+Connector_Video
+HDMI_Micro-D_Molex_46765-0x01
+HDMI, Micro, Type D, SMD, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf)
+hdmi micro type d right angle smd
+0
+23
+20
+Connector_Video
+HDMI_Micro-D_Molex_46765-1x01
+HDMI, Micro, Type D, THT, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf)
+hdmi micro type d right angle tht
+0
+23
+20
+Connector_Video
+HDMI_Micro-D_Molex_46765-2x0x
+HDMI, Micro, Type D, THT/SMD hybrid, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf)
+hdmi micro type d right angle tht smd hybrid 
+0
+23
+20
+Connector_Wago
+Wago_734-132_1x02_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-132 , 2 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+2
+2
+Connector_Wago
+Wago_734-133_1x03_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-133 , 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+3
+3
+Connector_Wago
+Wago_734-134_1x04_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-134 , 4 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+4
+4
+Connector_Wago
+Wago_734-135_1x05_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-135 , 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+5
+5
+Connector_Wago
+Wago_734-136_1x06_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-136 , 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+6
+6
+Connector_Wago
+Wago_734-137_1x07_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-137 , 7 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+7
+7
+Connector_Wago
+Wago_734-138_1x08_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-138 , 8 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+8
+8
+Connector_Wago
+Wago_734-139_1x09_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-139 , 9 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+9
+9
+Connector_Wago
+Wago_734-140_1x10_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-140 , 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+10
+10
+Connector_Wago
+Wago_734-141_1x11_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-141 , 11 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+11
+11
+Connector_Wago
+Wago_734-142_1x12_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-142 , 12 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+12
+12
+Connector_Wago
+Wago_734-143_1x13_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-143 , 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+13
+13
+Connector_Wago
+Wago_734-144_1x14_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-144 , 14 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+14
+14
+Connector_Wago
+Wago_734-146_1x16_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-146 , 16 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+16
+16
+Connector_Wago
+Wago_734-148_1x18_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-148 , 18 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+18
+18
+Connector_Wago
+Wago_734-150_1x20_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-150 , 20 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+20
+20
+Connector_Wago
+Wago_734-154_1x24_P3.50mm_Vertical
+Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-154 , 24 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  vertical
+0
+24
+24
+Connector_Wago
+Wago_734-162_1x02_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-162 , 2 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+2
+2
+Connector_Wago
+Wago_734-163_1x03_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-163 , 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+3
+3
+Connector_Wago
+Wago_734-164_1x04_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-164 , 4 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+4
+4
+Connector_Wago
+Wago_734-165_1x05_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-165 , 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+5
+5
+Connector_Wago
+Wago_734-166_1x06_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-166 , 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+6
+6
+Connector_Wago
+Wago_734-167_1x07_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-167 , 7 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+7
+7
+Connector_Wago
+Wago_734-168_1x08_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-168 , 8 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+8
+8
+Connector_Wago
+Wago_734-169_1x09_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-169 , 9 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+9
+9
+Connector_Wago
+Wago_734-170_1x10_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-170 , 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+10
+10
+Connector_Wago
+Wago_734-171_1x11_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-171 , 11 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+11
+11
+Connector_Wago
+Wago_734-172_1x12_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-172 , 12 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+12
+12
+Connector_Wago
+Wago_734-173_1x13_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-173 , 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+13
+13
+Connector_Wago
+Wago_734-174_1x14_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-174 , 14 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+14
+14
+Connector_Wago
+Wago_734-176_1x16_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-176 , 16 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+16
+16
+Connector_Wago
+Wago_734-178_1x18_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-178 , 18 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+18
+18
+Connector_Wago
+Wago_734-180_1x20_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-180 , 20 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+20
+20
+Connector_Wago
+Wago_734-184_1x24_P3.50mm_Horizontal
+Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-184 , 24 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator
+connector Wago  horizontal
+0
+24
+24
+Connector_Wire
+SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm
+Soldered wire connection, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm
+Soldered wire connection, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm
+Soldered wire connection, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm
+Soldered wire connection, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm
+Soldered wire connection, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm
+Soldered wire connection, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.1sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm
+Soldered wire connection, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm
+Soldered wire connection, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm
+Soldered wire connection, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm
+Soldered wire connection, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm
+Soldered wire connection, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm
+Soldered wire connection, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm
+Soldered wire connection, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm
+Soldered wire connection, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm
+Soldered wire connection, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm
+Soldered wire connection, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm
+Soldered wire connection, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm
+Soldered wire connection, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm
+Soldered wire connection, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm
+Soldered wire connection, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm
+Soldered wire connection, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm
+Soldered wire connection, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm
+Soldered wire connection, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm
+Soldered wire connection, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.15sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm
+Soldered wire connection, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm
+Soldered wire connection, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm
+Soldered wire connection, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm
+Soldered wire connection, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm
+Soldered wire connection, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm
+Soldered wire connection, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm
+Soldered wire connection, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm
+Soldered wire connection, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm
+Soldered wire connection, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm
+Soldered wire connection, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm
+Soldered wire connection, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm
+Soldered wire connection, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.25sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm
+Soldered wire connection, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm
+Soldered wire connection, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm
+Soldered wire connection, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm
+Soldered wire connection, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm
+Soldered wire connection, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm
+Soldered wire connection, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm
+Soldered wire connection, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm
+Soldered wire connection, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm
+Soldered wire connection, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm
+Soldered wire connection, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm
+Soldered wire connection, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm
+Soldered wire connection, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.75sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm
+Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm
+Soldered wire connection, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm
+Soldered wire connection, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm
+Soldered wire connection, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm
+Soldered wire connection, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm
+Soldered wire connection, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 0.127sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm
+Soldered wire connection, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm
+Soldered wire connection, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm
+Soldered wire connection, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm
+Soldered wire connection, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm
+Soldered wire connection, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm
+Soldered wire connection, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm
+Soldered wire connection, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm
+Soldered wire connection, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm
+Soldered wire connection, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm
+Soldered wire connection, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm
+Soldered wire connection, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm
+Soldered wire connection, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm
+Soldered wire connection, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm
+Soldered wire connection, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm
+Soldered wire connection, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm
+Soldered wire connection, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm
+Soldered wire connection, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm
+Soldered wire connection, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm
+Soldered wire connection, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm
+Soldered wire connection, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm
+Soldered wire connection, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm
+Soldered wire connection, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm
+Soldered wire connection, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm
+Soldered wire connection, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 1sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm
+Soldered wire connection, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm
+Soldered wire connection, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm
+Soldered wire connection, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm
+Soldered wire connection, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm
+Soldered wire connection, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm
+Soldered wire connection, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm
+Soldered wire connection, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm
+Soldered wire connection, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm
+Soldered wire connection, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm
+Soldered wire connection, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm
+Soldered wire connection, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm
+Soldered wire connection, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2.5sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2sqmm_1x01_D2mm_OD3.9mm
+Soldered wire connection, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-2sqmm_1x01_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2sqmm_1x01_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm
+Soldered wire connection, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm
+Soldered wire connection, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm
+Soldered wire connection, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm
+Soldered wire connection, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm
+Soldered wire connection, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 2sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-4sqmm_1x01_D3mm_OD6mm
+Soldered wire connection, for a single 4 mm² wire, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-4sqmm_1x01_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for a single 4 mm² wire, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-4sqmm_1x01_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 4 mm² wire, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm
+Soldered wire connection, for 2 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-4sqmm_1x03_P12mm_D3mm_OD6mm
+Soldered wire connection, for 3 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-4sqmm_1x03_P12mm_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-4sqmm_1x03_P12mm_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-4sqmm_1x04_P12mm_D3mm_OD6mm
+Soldered wire connection, for 4 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-4sqmm_1x04_P12mm_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-4sqmm_1x04_P12mm_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-4sqmm_1x05_P12mm_D3mm_OD6mm
+Soldered wire connection, for 5 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-4sqmm_1x05_P12mm_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-4sqmm_1x05_P12mm_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-4sqmm_1x06_P12mm_D3mm_OD6mm
+Soldered wire connection, for 6 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-4sqmm_1x06_P12mm_D3mm_OD6mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-4sqmm_1x06_P12mm_D3mm_OD6mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 4 mm² wires, reinforced insulation, conductor diameter 3mm, outer diameter 6mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 4sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-6sqmm_1x01_D3.5mm_OD7mm
+Soldered wire connection, for a single 6 mm² wire, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+1
+1
+Connector_Wire
+SolderWire-6sqmm_1x01_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for a single 6 mm² wire, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-6sqmm_1x01_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for a single 6 mm² wire, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+1
+1
+Connector_Wire
+SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mm
+Soldered wire connection, for 2 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+2
+2
+Connector_Wire
+SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for 2 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 2 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+2
+2
+Connector_Wire
+SolderWire-6sqmm_1x03_P14mm_D3.5mm_OD7mm
+Soldered wire connection, for 3 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+3
+3
+Connector_Wire
+SolderWire-6sqmm_1x03_P14mm_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for 3 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-6sqmm_1x03_P14mm_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 3 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+3
+3
+Connector_Wire
+SolderWire-6sqmm_1x04_P14mm_D3.5mm_OD7mm
+Soldered wire connection, for 4 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+4
+4
+Connector_Wire
+SolderWire-6sqmm_1x04_P14mm_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for 4 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-6sqmm_1x04_P14mm_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 4 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+4
+4
+Connector_Wire
+SolderWire-6sqmm_1x05_P14mm_D3.5mm_OD7mm
+Soldered wire connection, for 5 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+5
+5
+Connector_Wire
+SolderWire-6sqmm_1x05_P14mm_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for 5 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-6sqmm_1x05_P14mm_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 5 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+5
+5
+Connector_Wire
+SolderWire-6sqmm_1x06_P14mm_D3.5mm_OD7mm
+Soldered wire connection, for 6 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm
+0
+6
+6
+Connector_Wire
+SolderWire-6sqmm_1x06_P14mm_D3.5mm_OD7mm_Relief
+Soldered wire connection with feed through strain relief, for 6 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm strain-relief
+0
+6
+6
+Connector_Wire
+SolderWire-6sqmm_1x06_P14mm_D3.5mm_OD7mm_Relief2x
+Soldered wire connection with double feed through strain relief, for 6 times 6 mm² wires, reinforced insulation, conductor diameter 3.5mm, outer diameter 7mm, size source Multi-Contact FLEXI-xV 2.5 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter, generated with kicad-footprint-generator
+connector wire 6sqmm double-strain-relief
+0
+6
+6
+Connector_Wire
+SolderWirePad_1x01_SMD_1x2mm
+Wire Pad, Square, SMD Pad,  1mm x 2mm,
+MesurementPoint Square SMDPad 1mmx2mm 
+0
+1
+1
+Connector_Wire
+SolderWirePad_1x01_SMD_5x10mm
+Wire Pad, Square, SMD Pad,  5mm x 10mm,
+MesurementPoint Square SMDPad 5mmx10mm 
+0
+1
+1
+Connector_Wuerth
+Wuerth_WR-PHD_613004216921_Large_2x02_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613004216921 (https://katalog.we-online.de/em/datasheet/613004216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613004216921
+0
+4
+4
+Connector_Wuerth
+Wuerth_WR-PHD_613006216921_Large_2x03_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613006216921 (https://katalog.we-online.de/em/datasheet/613006216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613006216921
+0
+6
+6
+Connector_Wuerth
+Wuerth_WR-PHD_613008216921_Large_2x04_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613008216921 (https://katalog.we-online.de/em/datasheet/613008216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613008216921
+0
+8
+8
+Connector_Wuerth
+Wuerth_WR-PHD_613010216921_Large_2x05_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613010216921 (https://katalog.we-online.de/em/datasheet/613010216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613010216921
+0
+10
+10
+Connector_Wuerth
+Wuerth_WR-PHD_613012216921_Large_2x06_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613012216921 (https://katalog.we-online.de/em/datasheet/613012216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613012216921
+0
+12
+12
+Connector_Wuerth
+Wuerth_WR-PHD_613016216921_Large_2x08_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613016216921 (https://katalog.we-online.de/em/datasheet/613016216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613016216921
+0
+16
+16
+Connector_Wuerth
+Wuerth_WR-PHD_613018216921_Large_2x09_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613018216921 (https://katalog.we-online.de/em/datasheet/613018216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613018216921
+0
+18
+18
+Connector_Wuerth
+Wuerth_WR-PHD_613020216921_Large_2x10_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613020216921 (https://katalog.we-online.de/em/datasheet/613020216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613020216921
+0
+20
+20
+Connector_Wuerth
+Wuerth_WR-PHD_613022216921_Large_2x11_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613022216921 (https://katalog.we-online.de/em/datasheet/613022216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613022216921
+0
+22
+22
+Connector_Wuerth
+Wuerth_WR-PHD_613024216921_Large_2x12_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613024216921 (https://katalog.we-online.de/em/datasheet/613024216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613024216921
+0
+24
+24
+Connector_Wuerth
+Wuerth_WR-PHD_613026216921_Large_2x13_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613026216921 (https://katalog.we-online.de/em/datasheet/613026216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613026216921
+0
+26
+26
+Connector_Wuerth
+Wuerth_WR-PHD_613032216921_Large_2x16_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613032216921 (https://katalog.we-online.de/em/datasheet/613032216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613032216921
+0
+32
+32
+Connector_Wuerth
+Wuerth_WR-PHD_613034216921_Large_2x17_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Large, Wuerth electronics 613034216921 (https://katalog.we-online.de/em/datasheet/613034216921.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 613034216921
+0
+34
+34
+Connector_Wuerth
+Wuerth_WR-PHD_610004243021_SMD_2x02_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610004243021 (https://katalog.we-online.de/em/datasheet/610004243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610004243021
+0
+4
+4
+Connector_Wuerth
+Wuerth_WR-PHD_610006243021_SMD_2x03_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610006243021 (https://katalog.we-online.de/em/datasheet/610006243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610006243021
+0
+6
+6
+Connector_Wuerth
+Wuerth_WR-PHD_610008243021_SMD_2x04_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610008243021 (https://katalog.we-online.de/em/datasheet/610008243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610008243021
+0
+8
+8
+Connector_Wuerth
+Wuerth_WR-PHD_610010243021_SMD_2x05_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610010243021 (https://katalog.we-online.de/em/datasheet/610010243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610010243021
+0
+10
+10
+Connector_Wuerth
+Wuerth_WR-PHD_610012243021_SMD_2x06_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610012243021 (https://katalog.we-online.de/em/datasheet/610012243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610012243021
+0
+12
+12
+Connector_Wuerth
+Wuerth_WR-PHD_610016243021_SMD_2x08_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610016243021 (https://katalog.we-online.de/em/datasheet/610016243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610016243021
+0
+16
+16
+Connector_Wuerth
+Wuerth_WR-PHD_610018243021_SMD_2x09_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610018243021 (https://katalog.we-online.de/em/datasheet/610018243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610018243021
+0
+18
+18
+Connector_Wuerth
+Wuerth_WR-PHD_610020243021_SMD_2x10_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610020243021 (https://katalog.we-online.de/em/datasheet/610020243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610020243021
+0
+20
+20
+Connector_Wuerth
+Wuerth_WR-PHD_610022243021_SMD_2x11_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610022243021 (https://katalog.we-online.de/em/datasheet/610022243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610022243021
+0
+22
+22
+Connector_Wuerth
+Wuerth_WR-PHD_610024243021_SMD_2x12_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610024243021 (https://katalog.we-online.de/em/datasheet/610024243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610024243021
+0
+24
+24
+Connector_Wuerth
+Wuerth_WR-PHD_610026243021_SMD_2x13_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610026243021 (https://katalog.we-online.de/em/datasheet/610026243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610026243021
+0
+26
+26
+Connector_Wuerth
+Wuerth_WR-PHD_610032243021_SMD_2x16_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610032243021 (https://katalog.we-online.de/em/datasheet/610032243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610032243021
+0
+32
+32
+Connector_Wuerth
+Wuerth_WR-PHD_610034243021_SMD_2x17_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry SMD, Wuerth electronics 610034243021 (https://katalog.we-online.de/em/datasheet/610034243021.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 610034243021
+0
+34
+34
+Connector_Wuerth
+Wuerth_WR-PHD_61300425721_Standard_2x02_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61300425721 (https://katalog.we-online.de/em/datasheet/61300425721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61300425721
+0
+4
+4
+Connector_Wuerth
+Wuerth_WR-PHD_61300625721_Standard_2x03_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61300625721 (https://katalog.we-online.de/em/datasheet/61300625721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61300625721
+0
+6
+6
+Connector_Wuerth
+Wuerth_WR-PHD_61300825721_Standard_2x04_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61300825721 (https://katalog.we-online.de/em/datasheet/61300825721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61300825721
+0
+8
+8
+Connector_Wuerth
+Wuerth_WR-PHD_61301025721_Standard_2x05_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61301025721 (https://katalog.we-online.de/em/datasheet/61301025721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61301025721
+0
+10
+10
+Connector_Wuerth
+Wuerth_WR-PHD_61301225721_Standard_2x06_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61301225721 (https://katalog.we-online.de/em/datasheet/61301225721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61301225721
+0
+12
+12
+Connector_Wuerth
+Wuerth_WR-PHD_61301625721_Standard_2x08_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61301625721 (https://katalog.we-online.de/em/datasheet/61301625721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61301625721
+0
+16
+16
+Connector_Wuerth
+Wuerth_WR-PHD_61302025721_Standard_2x10_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61302025721 (https://katalog.we-online.de/em/datasheet/61302025721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61302025721
+0
+20
+20
+Connector_Wuerth
+Wuerth_WR-PHD_61302425721_Standard_2x12_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61302425721 (https://katalog.we-online.de/em/datasheet/61302425721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61302425721
+0
+24
+24
+Connector_Wuerth
+Wuerth_WR-PHD_61302625721_Standard_2x13_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61302625721 (https://katalog.we-online.de/em/datasheet/61302625721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61302625721
+0
+26
+26
+Connector_Wuerth
+Wuerth_WR-PHD_61303225721_Standard_2x16_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61303225721 (https://katalog.we-online.de/em/datasheet/61303225721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61303225721
+0
+32
+32
+Connector_Wuerth
+Wuerth_WR-PHD_61303425721_Standard_2x17_P2.54mm_Vertical
+Connector Wuerth, WR-PHD 2.54mm Dual Socket Header Bottom Entry Standard, Wuerth electronics 61303425721 (https://katalog.we-online.de/em/datasheet/61303425721.pdf), generated with kicad-footprint-generator
+Connector Wuerth WR-PHD 2.54mm 61303425721
+0
+34
+34
+Connector_Wuerth
+Wuerth_WR-WTB_64800211622_1x02_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800211622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+2
+2
+Connector_Wuerth
+Wuerth_WR-WTB_64800311622_1x03_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800311622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+3
+3
+Connector_Wuerth
+Wuerth_WR-WTB_64800411622_1x04_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800411622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+4
+4
+Connector_Wuerth
+Wuerth_WR-WTB_64800511622_1x05_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800511622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+5
+5
+Connector_Wuerth
+Wuerth_WR-WTB_64800611622_1x06_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800611622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+6
+6
+Connector_Wuerth
+Wuerth_WR-WTB_64800711622_1x07_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800711622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+7
+7
+Connector_Wuerth
+Wuerth_WR-WTB_64800811622_1x08_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800811622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+8
+8
+Connector_Wuerth
+Wuerth_WR-WTB_64800911622_1x09_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64800911622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+9
+9
+Connector_Wuerth
+Wuerth_WR-WTB_64801011622_1x10_P1.50mm_Vertical
+Wuerth WR-WTB series connector, 64801011622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator
+connector Wuerth WR-WTB vertical
+0
+10
+10
+Converter_ACDC
+Converter_ACDC_CUI_PBO-3-Sxx_THT_Vertical
+ACDC-Converter, 3W, CUI PBO-3, THT https://www.cui.com/product/resource/pbo-3.pdf
+Converter AC-DC THT Vertical
+0
+6
+6
+Converter_ACDC
+Converter_ACDC_Hahn_HS-400xx_THT
+ACDC-Converter, 3W, Hahn-HS-400xx, THT https://www.schukat.com/schukat/schukat_cms_de.nsf/index/FrameView?OpenDocument&art=HS40009&wg=M7942
+Hahn ACDC-Converter THT
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-2Mxx
+ACDC-Converter, 2W, Hi-Link, HLK-2Mxx, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%972W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%912W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%AF%B4%E6%98%8E%E4%B9%A6V2.6.pdf)
+ACDC-Converter 2W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-5Mxx
+ACDC-Converter, 5W, Hi-Link, HLK-5Mxx, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%975W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%915W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V2.8.pdf)
+ACDC-Converter 5W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-10Mxx
+ACDC-Converter, 10W, Hi-Link, HLK-10Mxx, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9710W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%9110W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V1.8.pdf)
+ACDC-Converter 10W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-12MxxA
+ACDC-Converter, 12W, Hi-Link, HLK-12MxxA, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9712W%E7%B3%BB%E5%88%97/1/12W%E7%B3%BB%E5%88%97%E8%A7%84%E6%A0%BC%E4%B9%A6.pdf)
+ACDC-Converter 12W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-20Mxx
+ACDC-Converter, 20W, Hi-Link, HLK-20Mxx, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9720W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%9120W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V1.6.pdf)
+ACDC-Converter 20W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-30Mxx
+ACDC-Converter, 30W, Hi-Link, HLK-30Mxx, HLK-30MxxC, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9730W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%9130W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V1.6.pdf)
+ACDC-Converter 30W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Hi-Link_HLK-PMxx
+ACDC-Converter, 3W, Hi-Link, HLK-PMxx, THT (Script generated with StandardBox.py) (https://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%973W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%913W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V2.8.pdf)
+ACDC-Converter 3W THT Hi-Link board mount module
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-02-xx_SMD
+ACDC-Converter, 3W, Meanwell, IRM-02, SMD, https://www.meanwell.com/Upload/PDF/IRM-02/IRM-02-SPEC.PDF
+ACDC-Converter 3W
+0
+14
+14
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-02-xx_THT
+ACDC-Converter, 2W, Meanwell, IRM-02, THT, https://www.meanwell.co.uk/media/productPDF/IRM-02-spec.pdf
+ACDC-Converter 2W THT
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-03-xx_SMD
+ACDC-Converter, 3W, Meanwell, IRM-03, SMD, http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-03
+ACDC-Converter 3W
+0
+14
+14
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-03-xx_THT
+ACDC-Converter, 3W, Meanwell, IRM-03, THT, https://www.meanwell.com/Upload/PDF/IRM-03/IRM-03-SPEC.PDF
+ACDC-Converter 3W THT
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-05-xx_THT
+http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-05
+ACDC-Converter 5W   Meanwell IRM-05
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-10-xx_THT
+http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-10
+ACDC-Converter 10W   Meanwell IRM-10
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-20-xx_THT
+ACDC-Converter, 20W, Meanwell, IRM-20, THT http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-20
+ACDC-Converter 20W   Meanwell IRM-20
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_IRM-60-xx_THT
+ACDC-Converter, 50-60W, Meanwell, IRM-60, THT https://www.meanwellusa.com/productPdf.aspx?i=687
+switching power supply
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_MFM-10-xx_THT
+AC/DC board mount open frame power converter, input 80 ~ 264 VAC, 10W output, https://www.meanwellusa.com/upload/pdf/MFM-10/MFM-10-spec.pdf
+AC/DC power converter
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_MeanWell_MFM-15-xx_THT
+AC/DC board mount open frame power converter, input 80 ~ 264 VAC, 15W output, https://www.meanwell.com/Upload/PDF/MFM-15/MFM-15-SPEC.PDF
+AC/DC power converter
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Murata_BAC05SxxDC_THT
+ACDC-Converter, Murata, 5W, ClassB, https://www.murata.com/products/productdata/8809982558238/KAC-BAC05.pdf
+switching power supply tht
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_RECOM_RAC01-xxSGB_THT
+https://www.recom-power.com/pdf/Powerline-AC-DC/RAC01-GB.pdf
+recom power ac dc rac01xxgb rac01-05sgb rac01-12sgb
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_RECOM_RAC04-xxSGx_THT
+https://www.recom-power.com/pdf/Powerline-AC-DC/RAC04-GA.pdf
+recom power ac dc
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_RECOM_RAC05-xxSK_THT
+https://www.recom-power.com/pdf/Powerline-AC-DC/RAC05-K.pdf
+recom power ac dc
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_Recom_RAC20-xxDK_THT
+Recom RAC20-xxDK https://recom-power.com/pdf/Powerline_AC-DC/RAC20-K.pdf#page=6 Rev. 6/2020
+Recom RAC20-xxDK
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_Recom_RAC20-xxSK_THT
+Recom RAC20-xxSK https://recom-power.com/pdf/Powerline_AC-DC/RAC20-K.pdf#page=6 Rev. 6/2020
+Recom RAC20-xxSK
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMF_051xx_THT
+ACDC-Converter, TRACO, TMF 051xx, 5W, Rev. August 26. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmf05.pdf)
+ACDC-Converter TRACO TMF05 THT 5W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMF_101xx_THT
+ACDC-Converter, TRACO, TMF 101xx, 10W, Rev. August 27. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmf10.pdf)
+ACDC-Converter TRACO TMF10 THT 10W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMF_201xx_THT
+ACDC-Converter, TRACO, TMF 201xx, 20W, Rev. August 28. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmf20.pdf)
+ACDC-Converter TRACO TMF20 THT 20W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMF_301xx_THT
+ACDC-Converter, TRACO, TMF 301xx, 30W, Rev. October 10. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmf30.pdf)
+ACDC-Converter TRACO TMF30 THT 30W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMG_071xx_THT
+ACDC-Converter, TRACO, TMG 071xx, 7W, Rev. March 24. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmg07.pdf)
+ACDC-Converter TRACO TMG07 THT 1.08"x1.08" 7W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMG_151xx_THT
+ACDC-Converter, TRACO, TMG 151xx, 15W, Rev. March 26. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmg15.pdf)
+ACDC-Converter TRACO TMG15 THT 1.62"x1.07" 15W
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMLM-04_THT
+ACDC-Converter, TRACO, TMLM Series 04 https://www.tracopower.com/products/tmlm.pdf
+ACDC-Converter TRACO TMLM Series 04
+0
+7
+7
+Converter_ACDC
+Converter_ACDC_TRACO_TMLM-05_THT
+ACDC-Converter, TRACO TMLM 05,https://www.tracopower.com/products/tmlm.pdf
+ACDC-Converter TRACO TMLM 05
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMLM-10-20_THT
+ACDC-Converter, TRACO TMLM 10, TRACO TMLM 20, https://www.tracopower.com/products/tmlm.pdf
+ACDC-Converter TRACO TMLM 10 and TMLM 20
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_TRACO_TMPW5-1xx_THT
+ACDC-Converter, TRACO, TMPW5-xxx, 5W, Rev. March 19. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmpw5.pdf)
+ACDC-Converter TRACO TMPW5 THT 1.46"x1.08"
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_TRACO_TMPW10_1xx_THT
+ACDC-Converter, TRACO, TMPW 10, 10W, Rev. March 17. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmpw10.pdf)
+ACDC-Converter TRACO TMPW10 THT 1.46"x1.08"
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_TRACO_TPP-15-1xx-D_THT
+ACDC-Converter, 15W, TRACO TPP 15-D, 42 x 28.9 x 21.5mm, https://www.tracopower.com/sites/default/files/products/datasheets/tpp15_d_datasheet.pdf
+ACDC-Converter TRACO TPP
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_Vigortronix_VTX-214-010-1xx_THT
+ACDC converter, Vigortronix, VTX-214-010-1xx, 10W, input 90-265VAC, output 3.3-48V, body size 36x56x25.5mm (Script generated with StandardBox.py) (https://www.vigortronix.com/wp-content/uploads/2022/01/VTX-214-010-1-Series-D0034-1.pdf)
+switching regulator filter
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Vigortronix_VTX-214-010-2xx_THT
+Miniature ACDC converter, Vigortronix, VTX-214-010-2xx, 10W, input 90-265VAC, output 3.3-48V, body size 30x45.5x24mm (Script generated with StandardBox.py) (https://www.vigortronix.com/wp-content/uploads/2024/03/VTX-214-010-2xx-10W-Mini-AC-DC-Converter-Range-D0066.pdf)
+switching regulator filter
+0
+4
+4
+Converter_ACDC
+Converter_ACDC_Vigortronix_VTX-214-015-1xx_THT
+Miniature ACDC converter, Vigortronix, VTX-214-015-1xx, 15W, output 3.3-48V, body size 45x55x21mm (Script generated with StandardBox.py) (https://www.vigortronix.com/wp-content/uploads/2022/01/VTX-214-015-1-Series-D0035.pdf)
+switching regulator filter
+0
+5
+5
+Converter_ACDC
+Converter_ACDC_ZETTLER_ZPI03Sxx00WC_THT
+PCB mounted switching power module, AC input voltage range: 90VAC-264VAC, Class II Construction, https://www.zettlermagnetics.com/pdfs/ZPI03SXX00WC.pdf
+ACDC-Converter 3W ZETTLER ZPI
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Artesyn_ATA_SMD
+DCDC-Converter, Artesyn, ATA Series, 3W Single and Dual Output, 1500VDC Isolation, 24.0x13.7x8.0mm https://www.artesyn.com/power/assets/ata_series_ds_01apr2015_79c25814fd.pdf https://www.artesyn.com/power/assets/trn_dc-dc_ata_3w_series_releas1430412818_techref.pdf
+DCDC SMD
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_Bothhand_CFUDxxxx_THT
+DCDC-Converter, BOTHHAND, Type CFxxxx-Serie,  (Very dodgy url but was the only at hand), 
+DCDC-Converter BOTHHAND Type CFxxxx-Serie
+0
+10
+10
+Converter_DCDC
+Converter_DCDC_Bothhand_CFUSxxxxEH_THT
+DCDC-Converter, BOTHHAND, Type CFxxxx-Serie,  (Very dodgy url but was the only at hand), 
+DCDC-Converter BOTHHAND Type CFxxxx-Serie
+0
+9
+9
+Converter_DCDC
+Converter_DCDC_Bothhand_CFUSxxxx_THT
+DCDC-Converter, BOTHHAND, Type CFxxxx-Serie,  (Very dodgy url but was the only at hand), 
+DCDC-Converter BOTHHAND Type CFxxxx-Serie
+0
+8
+8
+Converter_DCDC
+Converter_DCDC_Cincon_EC5BExx_Dual_THT
+DCDC-Converter, CINCON, EC5BExx, 18-36VDC to Dual output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/B%20CASE/SPEC-EC5BE-V24.pdf
+DCDC-Converter CINCON EC5BExx 18-36VDC to Dual output
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_Cincon_EC5BExx_Single_THT
+DCDC-Converter, CINCON, EC5BExx, 18-36VDC to dual output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/B%20CASE/SPEC-EC5BE-V24.pdf
+DCDC-Converter CINCON EC5BExx 18-36VDC to dual output
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Cincon_EC6Cxx_Dual-Triple_THT
+DCDC-Converter, CINCON, EC6Cxx, dual or tripple output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/C%20CASE/SPEC-EC6C-V12.pdf
+DCDC-Converter CINCON EC6Cxx dual or tripple output
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_Cincon_EC6Cxx_Single_THT
+DCDC-Converter, CINCON, EC6Cxx, single output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/C%20CASE/SPEC-EC6C-V12.pdf
+DCDC-Converter CINCON EC6Cxx single output
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_Cyntec_MUN12AD01-SH
+http://www.cyntec.com/upfile/products/download/Cyntec%20MUN12AD01-SH_Datasheet.pdf
+Power Module uPOL MUN12AD01
+0
+13
+9
+Converter_DCDC
+Converter_DCDC_Cyntec_MUN12AD03-SH
+http://www.cyntec.com/upfile/products/download/Cyntec%20MUN12AD03-SH_Datasheet.pdf
+Power Module uPOL MUN12AD03
+0
+19
+11
+Converter_DCDC
+Converter_DCDC_Hamamatsu_C11204-1_THT
+Hamamatsu C11204-01 bias power supply module, body 19.4x17mm, height 4.7mm, https://www.hamamatsu.com/content/dam/hamamatsu-photonics/sites/documents/99_SALES_LIBRARY/ssd/c11204-01_kacc1203e.pdf
+MPPC SiPM bias-supply
+0
+16
+16
+Converter_DCDC
+Converter_DCDC_MeanWell_NID30_THT
+Meanwell DCDC non-isolated converter SIP module, http://www.meanwell.com/webapp/product/search.aspx?prod=nid30
+DCDC non-isolated converter 
+0
+11
+11
+Converter_DCDC
+Converter_DCDC_MeanWell_NID60_THT
+MeanWell NID60, http://www.meanwell.com/Upload/PDF/NID60/NID60-SPEC.PDF
+MeanWell NID60
+0
+11
+11
+Converter_DCDC
+Converter_DCDC_MeanWell_NSD10_THT
+MeanWell NSD10 (Script generated with StandardBox.py) (https://www.meanwell.com/webapp/product/search.aspx?prod=NSD10-D)
+MeanWell NSD NSD10
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_Murata_CRE1xxxxxx3C_THT
+Isolated 1W single output DC/DC, http://power.murata.com/data/power/ncl/kdc_cre1.pdf
+Isolated 1W single output DC/DC
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Murata_CRE1xxxxxxDC_THT
+Isloated DC-DC, http://power.murata.com/data/power/ncl/kdc_cre1.pdf
+Isloated DC-DC
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Murata_CRE1xxxxxxSC_THT
+http://power.murata.com/data/power/ncl/kdc_cre1.pdf
+murata dc-dc transformer
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Murata_MEE1SxxxxSC_THT
+https://power.murata.com/pub/data/power/ncl/kdc_mee1.pdf
+murata dc-dc transformer
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Murata_MEE3SxxxxSC_THT
+https://power.murata.com/pub/data/power/ncl/kdc_mee3.pdf
+murata dc-dc transformer
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_Murata_MGJ2DxxxxxxSC_THT
+Murata MGJ2DxxxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 2W, SIP package style, https://power.murata.com/data/power/ncl/kdc_mgj2.pdf
+Murata MGJ2DxxxxxxSC
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_Murata_MGJ3
+Murata MGJ3, 5.2kVDC Isolated 3W Gate Drive, 15V/5V/5V Configurable, 22.61x23.11x14.19mm, https://power.murata.com/datasheet?/data/power/ncl/kdc_mgj3.pdf
+DCDC SMD
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_Murata_MYRxP
+Murata MYRxP PicoBK DC/DC converter with inductor, 2x2.5mm, height 1.04mm. https://www.murata.com/en-global/products/power/nonisolated-dc-dc-converter/overview/lineup/picobk
+PicoBK DC/DC MYRBP MYRGP MYRLP
+0
+19
+9
+Converter_DCDC
+Converter_DCDC_Murata_NCS1SxxxxSC_THT
+Murata NCS1SxxxxSC (Script generated with StandardBox.py) (https://power.murata.com/data/power/ncl/kdc_ncs1.pdf)
+Murata NCS1SxxxxSC
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_Murata_NMAxxxxDC_THT
+Isolated 1W DCDC-Converter, http://power.murata.com/data/power/ncl/kdc_nma.pdf
+Isolated 1W DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_Murata_NMAxxxxSC_THT
+Murata NMAxxxxSC footprint based on SIP7, http://power.murata.com/data/power/ncl/kdc_nma.pdf
+Murata NMAxxxxSC DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_Murata_NXExSxxxxMC_SMD
+Isolated 1W or 2W Single Output SM DC/DC Converters https://www.murata.com/products/productdata/8807031865374/kdc-nxe1.pdf#page=8 https://www.murata.com/products/productdata/8807031898142/kdc-nxe2.pdf#page=9
+Isolated 1W or 2W Single Output SM DC/DC Converters
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_Murata_OKI-78SR_Horizontal
+https://power.murata.com/data/power/oki-78sr.pdf
+78sr3.3 78sr5 78sr9 78sr12 78srXX
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_Murata_OKI-78SR_Vertical
+https://power.murata.com/data/power/oki-78sr.pdf
+78sr3.3 78sr5 78sr9 78sr12 78srXX
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_RECOM_R-78B-2.0_THT
+DCDC-Converter, RECOM, RECOM_R-78B-2.0, SIP-3, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78Bxx-2.0.pdf
+dc-dc recom buck sip-3 pitch 2.54mm
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_RECOM_R-78E-0.5_THT
+DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf
+dc-dc recom buck sip-3 pitch 2.54mm
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_RECOM_R-78HB-0.5L_THT
+DCDC-Converter, RECOM, RECOM_R-78HB-0.5L, SIP-3, Horizontally Mounted, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf
+dc-dc recom buck sip-3 pitch 2.54mm
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_RECOM_R-78HB-0.5_THT
+DCDC-Converter, RECOM, RECOM_R-78HB-0.5, SIP-3, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf
+dc-dc recom buck sip-3 pitch 2.54mm
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_RECOM_R-78S-0.1_THT
+DCDC-Converter, RECOM, RECOM_R-78S-0.1, SIP-4, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Sxx-0.1.pdf
+dc-dc recom buck sip-4 pitch 2.54mm
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_RECOM_R5xxxDA_THT
+DCDC-Converter, RECOM, RECOM_R5xxxDA, SIP-12, Horizontally Mounted, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf
+dc-dc recom buck sip-12 pitch 2.54mm
+0
+12
+12
+Converter_DCDC
+Converter_DCDC_RECOM_R5xxxPA_THT
+DCDC-Converter, RECOM, RECOM_R5xxxPA, SIP-12, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf
+dc-dc recom buck sip-12 pitch 2.54mm
+0
+12
+12
+Converter_DCDC
+Converter_DCDC_RECOM_RCD-24_THT
+Constant current LED Driver DC/DC Converter, https://g.recomcdn.com/media/Datasheet/pdf/.fYUQjOlW/.t2a80a771bdbb0ef300f7/Datasheet-93/RCD-24.pdf
+Led Driver DC-DC 
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_RECOM_RPA60-xxxxSFW
+RPA60-FW 60W Isolated DC to DC Converters
+DCDC Regulator Single
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_RECOM_RPMx.x-x.0
+https://www.recom-power.com/pdf/Innoline/RPM-6.0.pdf
+dc-dc recom buck lga-25 pitch 2.29mm
+0
+25
+25
+Converter_DCDC
+Converter_DCDC_Silvertel_Ag54xx
+DCDC-Converter, 30W POE, Silvertel, pitch 2.54mm, package size 62x19.5x14mm, https://silvertel.com/images/datasheets/Ag5400-datasheet-high%20Efficiency-30W-Power-Over-Ethernet-Plus-Module-PoE+PD.pdf
+DCDC-Converter Silvertel Ag5405 Ag5412 Ag5424 single output POE
+0
+10
+10
+Converter_DCDC
+Converter_DCDC_Silvertel_Ag99xxLP_THT
+Converter, DCDC, Silvertel Ag9900 PoE, 1500VDC isolation, Vin 36V - 75V, 4.9W - 10W output, https://silvertel.com/images/datasheets/Ag9900M-datasheet-ultra-miniature-isolated-Power-over-Ethernet-POE-module.pdf
+DCDC converter IEEE 802.3af
+0
+8
+8
+Converter_DCDC
+Converter_DCDC_Silvertel_Ag5810
+DCDC-Converter, 60W POE, Silvertel, pitch 2.54mm, package size 69.98x30x15.64mm, https://silvertel.com/images/datasheets/Ag5810-datasheet-IEEE802_3bt-Power-over-Ethernet-4-pair-PD.pdf
+DCDC-Converter Silvertel Ag5810 single output POE
+0
+163
+13
+Converter_DCDC
+Converter_DCDC_TRACO_TBA1-xxxxE_Dual_THT
+DCDC-Converter, TRACO, TBA1-xxxxE, Dual, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba1e.pdf)
+DCDC-Converter TRACO TBA1E THT SIP-7 1W
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TBA1-xxxxE_Single_THT
+DCDC-Converter, TRACO, TBA1-xxxxE, Single, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba1e.pdf)
+DCDC-Converter TRACO TBA1E THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TBA2-xxxx_Dual_THT
+DCDC-Converter, TRACO, TBA2-xxxx, Dual, 2W, Rev. October 18. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba2.pdf)
+DCDC-Converter TRACO TBA2 THT SIP-7 2W
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TBA2-xxxx_Single_THT
+DCDC-Converter, TRACO, TBA2-xxxx, Single, 2W, Rev. October 18. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba2.pdf)
+DCDC-Converter TRACO TBA2 THT SIP-7 2W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TDN_5-xxxxWISM_SMD
+Traco TDN 5WISM Series, 5W, SMD (https://assets.tracopower.com/20200225170127/TDN5WISM/documents/tdn5wism-datasheet.pdf#page=3)
+dcdc traco 5w smd
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TDN_5-xxxxWI_THT
+Traco TDN 5WI Series, 5W (https://www.tracopower.com/sites/default/files/products/datasheets/tdn5wi_datasheet.pdf#page=4)
+dcdc traco 5w
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TDU1-xxxx_THT
+DCDC-Converter, TRACO, TDU1-xxxx, 1W, Rev. October 24. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tdu1.pdf)
+DCDC-Converter TRACO TDU1 THT DIP-8 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEA1-xxxxE_THT
+DCDC-Converter, TRACO, TEA1-xxxxE, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1e.pdf)
+DCDC-Converter TRACO TEA1E THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEA1-xxxxHI_THT
+DCDC-Converter, TRACO, TEA1-xxxxHI, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1hi.pdf)
+DCDC-Converter TRACO TEA1HI THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEA1-xxxx_THT
+DCDC-Converter, TRACO, TEA1-xxxx, 1W, Rev. October 19. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1.pdf)
+DCDC-Converter TRACO TEA1 THT SIP-4 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEC3-24xxUI_THT
+DCDC-Converter, TRACO, TEC3-24xxUI, 3W, Rev. July 31. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tec3ui.pdf)
+DCDC-Converter TRACO TEC3UI THT SIP-8 3W
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_TRACO_TEL12-xxxx_THT
+Traco 12W, THT (https://www.tracopower.com/sites/default/files/products/datasheets/tel12_datasheet.pdf)
+traco dcdc tht 12w
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TEN10-110xxWIRH_THT
+DCDC-Converter, TRACO, TEN 10-110xxWIRH, 10W, Rev. December 16. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/ten10wirh.pdf)
+DCDC-Converter TRACO TEN10WIRH THT DIP-24 TEN3WIRH TEN6WIRH
+0
+9
+9
+Converter_DCDC
+Converter_DCDC_TRACO_TEN10-xxxx_Dual_THT
+DCDC-Converter, TRACO, TEN10-xxxx, single output, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf
+DCDC-Converter TRACO TEN10-xxxx single output
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TEN10-xxxx_Single_THT
+DCDC-Converter, TRACO, TEN10-xxxx, single output, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf
+DCDC-Converter TRACO TEN10-xxxx single output
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEN10-xxxx_THT
+DCDC-Converter, TRACO, TEN10-xxxx, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf
+DCDC-Converter TRACO TEN10-xxxx
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TEN20-110xxWIRH_THT
+DCDC-Converter, TRACO, TEN 20-110xxWIRH, 20W, Rev. August 22. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/ten20wirh.pdf)
+DCDC-Converter TRACO TEN20WIRH THT 1"x1.6" 20W
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TEN20-xxxx-N4_THT
+DCDC-Converter TRACO TEN20 Generic, https://assets.tracopower.com/20171102100522/TEN20/documents/ten20-datasheet.pdf
+DCDC-Converter TRACO TEN20 Generic
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TEN20-xxxx_THT
+DCDC-Converter TRACO TEN20 Generic, https://assets.tracopower.com/20171102100522/TEN20/documents/ten20-datasheet.pdf
+DCDC-Converter TRACO TEN20 Generic
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TEN40-110xxWIRH_THT
+DCDC-Converter, TRACO, TEN 40-110xxWIRH, 40W, Rev. October 2. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/ten40wirh.pdf)
+DCDC-Converter TRACO TEN40WIRH THT 2"x1" 40W
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_THB10-xxxx_Dual_THT
+DCDC-Converter, TRACO, THB10-xxxx, Dual, 10W, Rev. March 12. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/thb10.pdf)
+DCDC-Converter TRACO THB10 THT 2"x1" 10W TRI15 TRI20
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_THB10-xxxx_Single_THT
+DCDC-Converter, TRACO, THB10-xxxx, Single, 10W, Rev. March 12. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/thb10.pdf)
+DCDC-Converter TRACO THB10 THT 2"x1" 10W TRI15 TRI20
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_THD_15-xxxxWIN_THT
+Traco THD 15WIN, 15W, THT (https://www.tracopower.com/products/thd15win.pdf#page=3)
+traco dcdc tht 15w
+0
+9
+9
+Converter_DCDC
+Converter_DCDC_TRACO_THN30-xxxx_THT
+DCDC-Converter TRACO THN 10 to 30W, Single or dual Output, (https://www.tracopower.com/sites/default/files/products/datasheets/thn30_datasheet.pdf)
+DCDC-Converter TRACO THN30 Generic
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_THR40-72xxWI_THT
+DCDC-Converter, TRACO, THR40-72xxWI, THR40-72xxxWI, 40W, Rev. November 4. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/thr40wi.pdf)
+DCDC-Converter TRACO THR40WI THT 2"x1" 40W
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TMA-05xxD_12xxD_Dual_THT
+DCDC-Converter, TRACO, TMA-05xxD, TMA-12xxD, Dual, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf)
+DCDC-Converter TRACO TMA THT SIP-7 1W
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TMA-05xxS_12xxS_Single_THT
+DCDC-Converter, TRACO, TMA-05xxS, TMA-12xxS, Single, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf)
+DCDC-Converter TRACO TMA THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TMA-15xxD_24xxD_Dual_THT
+DCDC-Converter, TRACO, TMA-15xxD, TMA-25xxD, Dual, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf)
+DCDC-Converter TRACO TMA THT SIP-7 1W
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TMA-15xxS_24xxS_Single_THT
+DCDC-Converter, TRACO, TMA-15xxS, TMA-24xxS, Single, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf)
+DCDC-Converter TRACO TMA THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TME_03xxS_05xxS_12xxS_Single_THT
+DCDC-Converter, TRACO, TME-03xxS, TME-05xxS, TME-12xxS, 1W, Rev. September 26. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tme.pdf)
+DCDC-Converter TRACO TME THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TME_24xxS_Single_THT
+DCDC-Converter, TRACO, TME-24xxS, 1W, Rev. September 26. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tme.pdf)
+DCDC-Converter TRACO TME THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TMR-1-xxxx_Dual_THT
+DCDC-Converter, TRACO, TMR 1-xxxx, Dual output, Rev. March 21.2016
+DCDC-Converter TRACO TMR1-xxxx Dual_output
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TMR-1-xxxx_Single_THT
+DCDC-Converter, TRACO, TMR 1-xxxx, Single output, Rev. March 21.2016
+DCDC-Converter TRACO TMR1-xxxx Single_output
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TMR-1SM_SMD
+http://assets.tracopower.com/TMR1SM/documents/tmr1sm-datasheet.pdf
+DCDC SMD TRACO TMR-1SM
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_TRACO_TMR-2xxxxWI_THT
+https://www.tracopower.com/products/tmr2wi.pdf
+DCDC-Converter TRACO TMRxxxxWI Single/Dual_output
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_TRACO_TMR-xxxx_THT
+DCDC-Converter, TRACO, TMR xxxx, Single/Dual output, http://www.datasheetlib.com/datasheet/135136/tmr-2-2410e_traco-power.html?page=3#datasheet
+DCDC-Converter TRACO TMRxxxx Single/Dual_output
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_TRACO_TMR4-xxxxWI_THT
+DCDC-Converter, TRACO, TMR4-xxxxWI, 4W, Rev. December 06. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmr4wi.pdf)
+DCDC-Converter TRACO TMR4WI THT SIP-8 4W
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_TRACO_TMR10-24xxWIR_48xxWIR_72xxWIR_THT
+DCDC-Converter, TRACO, TMR 10-24xxWIR, TMR 10-48xxWIR, TMR 10-72xxWIR, 10W, Rev. April 29. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmr10wir.pdf)
+DCDC-Converter TRACO TMR10WIR THT SIP-8 10W
+0
+8
+8
+Converter_DCDC
+Converter_DCDC_TRACO_TMU3-05xx_12xx_THT
+DCDC-Converter, TRACO, TMU3-05xx, TMU3-12xx, 3W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmu3.pdf)
+DCDC-Converter TRACO TMU3 THT SIP-4 3W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TMU3-24xx_THT
+DCDC-Converter, TRACO, TMU3-24xx, 3W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmu3.pdf)
+DCDC-Converter TRACO TMU3 THT SIP-4 3W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TOS06-05SIL_THT
+DCDC-Converter, TRACO, TOS06-05SIL, 6A, Rev. March 20. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tos06sil.pdf)
+DCDC-Converter POL TRACO TOS06SIL 2.54MM THT SIP-9 6A
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TOS06-12SIL_THT
+DCDC-Converter, TRACO, TOS06-12SIL, 6A, Rev. March 20. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tos06sil.pdf)
+DCDC-Converter POL TRACO TOS06SIL 2.54MM THT SIP-9 6A
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TRA3-xxxx_THT
+DCDC-Converter, TRACO, TRA3-xxxx, 3W, Rev. February 4. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tra3.pdf)
+DCDC-Converter TRACO TRA3 THT SIP-7 3W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TRI1-xxxx_THT
+DCDC-Converter, TRACO, TRI1-xxxx, 1W, Rev. November 13. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tri1.pdf)
+DCDC-Converter TRACO TRI1 THT SIP-7 1W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TRI10_Dual_THT
+DCDC-Converter, TRACO, TRI 10, Dual, 10W, Rev. March 11. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tri10.pdf)
+DCDC-Converter TRACO TRI10 THT DIP-24
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_TRACO_TRI10_Single_THT
+DCDC-Converter, TRACO, TRI 10, Single, 10W, Rev. March 11. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tri10.pdf)
+DCDC-Converter TRACO TRI10 THT DIP-24
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TRN3-xx1x_Single_THT
+DCDC-Converter, TRACO, TRN3-xx1x, 3W, Rev. February 3. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/trn3.pdf)
+DCDC-Converter TRACO TRN3 THT SIP-5 3W
+0
+4
+4
+Converter_DCDC
+Converter_DCDC_TRACO_TRN3-xx2x_Dual_THT
+DCDC-Converter, TRACO, TRN3-xx2x, 3W, Rev. February 3. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/trn3.pdf)
+DCDC-Converter TRACO TRN3 THT SIP-5 3W
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_TRACO_TSR-1_THT
+DCDC-Converter, TRACO, TSR 1-xxxx
+DCDC-Converter TRACO TSR-1
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_TRACO_TSR0.5-24xx_TSR0.5-24xxx_THT
+DCDC-Converter, TRACO, TSR0.5-24xx, TSR0.5-24xxx, 0.5A, Rev. February 11. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr0.5.pdf)
+DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR0.5 2.54MM THT SIP-3 0.5A
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_TRACO_TSR0.6-48xxWI_TSR0.6-48xxxWI_THT
+DCDC-Converter, TRACO, TSR0.6-48xxWI, TSR0.6-48xxxWI, 0.6A, Rev. October 29. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr0.6wi.pdf)
+DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR0.6WI 2.54MM THT SIP-3 0.6A
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_TRACO_TSR1-xxxxE_THT
+DCDC-Converter, TRACO, TSR1-xxxxE, 1A, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr1e.pdf)
+DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR1E 2.54MM THT SIP-3 1A
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_TRACO_TSR2-24xxN_TSR2-24xxxN_THT
+DCDC-Converter, TRACO, TSR2-24xxN, TSR2-24xxxN, 2A, Rev. December 19. 2024 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr2n.pdf)
+DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR2N 2.54MM THT SIP-3 2A TSR3N
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_TRACO_TSR2-xxxx_THT
+DCDC-Converter, TRACO, TSR2-xxxx, 2A, Rev. January 20. 2025 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr2.pdf)
+DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR2 2.54MM THT SIP-3 2A
+0
+3
+3
+Converter_DCDC
+Converter_DCDC_XP_POWER-IA48xxD_THT
+XP_POWER  IA48xxD, DIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator
+XP_POWER  IA48xxD DIP DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER-IA48xxS_THT
+XP_POWER  IA48xxS, SIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator
+XP_POWER  IA48xxS SIP DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_XP_POWER-IAxxxxD_THT
+XP_POWER  IAxxxxD, DIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator
+XP_POWER  IAxxxxD DIP DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER-IAxxxxS_THT
+XP_POWER  IAxxxxS, SIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator
+XP_POWER  IAxxxxS SIP DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_XP_POWER-IHxxxxDH_THT
+XP_POWER  IHxxxxDH, DIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator
+XP_POWER  IHxxxxDH DIP DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER-IHxxxxD_THT
+XP_POWER  IHxxxxD, DIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator
+XP_POWER  IHxxxxD DIP DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER-IHxxxxSH_THT
+XP_POWER  IHxxxxSH, SIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator
+XP_POWER  IHxxxxSH SIP DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_XP_POWER-IHxxxxS_THT
+XP_POWER  IHxxxxS, SIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator
+XP_POWER  IHxxxxS SIP DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_XP_POWER-ISU02_SMD
+DCDC-Converter, XP POWER, ISU02 Series, 2W Single and Dual Output, 1500VDC Isolation, 19.0x17.0x8.7mm https://www.xppower.com/Portals/0/pdfs/SF_ISU02.pdf
+DCDC SMD XP POWER ISU02
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_XP_POWER-ITQxxxxS-H_THT
+XP_POWER  ITQxxxxS-H, SIP, (https://www.xppower.com/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator
+XP_POWER  ITQxxxxS-H SIP DCDC-Converter
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER-ITXxxxxSA_THT
+XP_POWER  ITXxxxxSA, SIP, (https://www.xppower.com/pdfs/SF_ITX.pdf), generated with kicad-footprint-generator
+XP_POWER  ITXxxxxSA SIP DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_XP_POWER-ITxxxxxS_THT
+XP_POWER  ITxxxxxS, SIP, (https://www.xppower.com/pdfs/SF_ITX.pdf https://www.xppower.com/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator
+XP_POWER  ITxxxxxS SIP DCDC-Converter
+0
+7
+7
+Converter_DCDC
+Converter_DCDC_XP_POWER_JTDxxxxxxx_THT
+XP Power JTD Series DC-DC Converter
+DCDC Isolated
+0
+6
+6
+Converter_DCDC
+Converter_DCDC_XP_POWER_JTExxxxDxx_THT
+DCDC-Converter, XP POWER, Type JTE06 Series,  Dual Output
+DCDC-Converter XP_POWER JTE06 Dual
+0
+8
+8
+Converter_DCDC
+Converter_DCDC_muRata_MEJ1DxxxxSC_THT
+muRata MEJ1DxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 1W, dual output, SIP package style, https://power.murata.com/data/power/ncl/kdc_mej1.pdf
+muRata MEJ1D DCDC-Converter
+0
+5
+5
+Converter_DCDC
+Converter_DCDC_muRata_MEJ1SxxxxSC_THT
+muRata MEJ1SxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 1W, single output, SIP package style, https://power.murata.com/data/power/ncl/kdc_mej1.pdf
+muRata MEJ1S DCDC-Converter
+0
+4
+4
+Crystal
+Crystal_AT310_D3.0mm_L10.0mm_Horizontal
+AT310, Crystal, with length tolerance, length 10.5mm, width 3.0mm, THT, https://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf
+
+0
+2
+2
+Crystal
+Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style1
+AT310, Crystal, with length tolerance, length 10.5mm, width 3.0mm, THT, https://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf
+
+0
+3
+3
+Crystal
+Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style2
+AT310, Crystal, with length tolerance, length 10.5mm, width 3.0mm, THT, https://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf
+
+0
+5
+3
+Crystal
+Crystal_AT310_D3.0mm_L10.0mm_Vertical
+AT310, Crystal, with length tolerance, length 10.5mm, width 3mm, https://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf
+
+0
+2
+2
+Crystal
+Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal
+C26-LF, Crystal, length 6.5mm, width 2.1mm, THT
+
+0
+2
+2
+Crystal
+Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal_1EP_style1
+C26-LF, Crystal, length 6.5mm, width 2.1mm, THT
+
+0
+3
+3
+Crystal
+Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal_1EP_style2
+C26-LF, Crystal, length 6.5mm, width 2.1mm, THT
+
+0
+5
+3
+Crystal
+Crystal_C26-LF_D2.1mm_L6.5mm_Vertical
+C26-LF, Crystal, length 6.5mm, width 2.06mm
+
+0
+2
+2
+Crystal
+Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal
+C38-LF, Crystal, length 8.0mm, width 3.0mm, THT
+
+0
+2
+2
+Crystal
+Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style1
+C38-LF, Crystal, length 8.0mm, width 3.0mm, THT
+
+0
+3
+3
+Crystal
+Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style2
+C38-LF, Crystal, length 8.0mm, width 3.0mm, THT
+
+0
+5
+3
+Crystal
+Crystal_C38-LF_D3.0mm_L8.0mm_Vertical
+C38-LF, Crystal, length 8.0mm, width 3mm
+
+0
+2
+2
+Crystal
+Crystal_DS10_D1.0mm_L4.3mm_Horizontal
+DS10, Crystal, length 4.3mm, width 1.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_DS10_D1.0mm_L4.3mm_Horizontal_1EP_style1
+DS10, Crystal, length 4.3mm, width 1.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+3
+3
+Crystal
+Crystal_DS10_D1.0mm_L4.3mm_Horizontal_1EP_style2
+DS10, Crystal, length 4.3mm, width 1.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+5
+3
+Crystal
+Crystal_DS10_D1.0mm_L4.3mm_Vertical
+DS10, Crystal, length 4.3mm, width 1mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_DS15_D1.5mm_L5.0mm_Horizontal
+DS15, Crystal, length 5.0mm, width 1.5mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_DS15_D1.5mm_L5.0mm_Horizontal_1EP_style1
+DS15, Crystal, length 5.0mm, width 1.5mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+3
+3
+Crystal
+Crystal_DS15_D1.5mm_L5.0mm_Horizontal_1EP_style2
+DS15, Crystal, length 5.0mm, width 1.5mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+5
+3
+Crystal
+Crystal_DS15_D1.5mm_L5.0mm_Vertical
+DS15, Crystal DS15, length 5.0mm, width 1.5mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_DS26_D2.0mm_L6.0mm_Horizontal
+DS26, Crystal, length 6.0mm, width 2.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style1
+DS26, Crystal, length 6.0mm, width 2.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+3
+3
+Crystal
+Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style2
+DS26, Crystal, length 6.0mm, width 2.0mm, THT, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+5
+3
+Crystal
+Crystal_DS26_D2.0mm_L6.0mm_Vertical
+DS26, Crystal, length 6.0mm, width 2mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC18-U_Horizontal
+HC18/U, Crystal, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC18-U_Horizontal_1EP_style1
+HC18/U, Crystal HC-18/U, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC18-U_Horizontal_1EP_style2
+HC18/U, Crystal, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC18-U_Vertical
+HC-18/U, Crystal, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC33-U_Horizontal
+HC-33/U, Crystal, length 19.7mm, width 19.2mm, THT, http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC33-U_Horizontal_1EP_style1
+HC-33/U, Crystal, length 19.7mm, width 19.2mm, THT, http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC33-U_Horizontal_1EP_style2
+HC-33/U, Crystal, length 19.7mm, width 19.2mm, THT, http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC33-U_Vertical
+HC-33/U, Crystal, http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC35-U
+Crystal, Quarz, HC35/U, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/TO71xx.pdf
+Crystal Quarz HC35/U
+0
+3
+3
+Crystal
+Crystal_HC49-4H_Vertical
+HC-49-4H, Crystal, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC49-U-3Pin_Vertical
+HC-49/U, Crystal, 3-pinversion, http://www.raltron.com/products/pdfspecs/crystal_hc_49_45_51.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC49-U_Horizontal
+HC-49/U, Crystal, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC49-U_Horizontal_1EP_style1
+HC-49/U, Crystal, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC49-U_Horizontal_1EP_style2
+HC-49/U, Crystal, length 13.0mm, width 10.9mm, THT, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC49-U_Vertical
+HC-49/U, Crystal, http://5hertz.com/pdfs/04404_D.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC50_Horizontal
+HC-50, Crystal, length 13.4mm, width 11.1mm, THT, http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC50_Horizontal_1EP_style1
+HC-50, Crystal, length 13.4mm, width 11.1mm, THT, http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC50_Horizontal_1EP_style2
+HC-50, Crystal, length 13.4mm, width 11.1mm, THT, http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC50_Vertical
+HC-50, Crystal, http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC51-U_Vertical
+HC-51/U, Crystal, http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC51_Horizontal
+HC-51, Crystal, length 19.7mm, width 19.3mm, THT, http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC51_Horizontal_1EP_style1
+HC-51, Crystal, length 19.7mm, width 19.3mm, THT, http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC51_Horizontal_1EP_style2
+HC-51, Crystal, length 19.7mm, width 19.3mm, THT, http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC52-6mm_Horizontal
+HC-51/6mm, Crystal, length 6.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC52-6mm_Horizontal_1EP_style1
+HC-51/6mm, Crystal, length 6.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC52-6mm_Horizontal_1EP_style2
+HC-51/6mm, Crystal, length 6.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC52-6mm_Vertical
+HC-52/6mm, Crystal, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC52-8mm_Horizontal
+HC-51/8mm, Crystal, length 8.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC52-8mm_Horizontal_1EP_style1
+HC-51/8mm, Crystal, length 8.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC52-8mm_Horizontal_1EP_style2
+HC-51/8mm, Crystal, length 8.0mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC52-8mm_Vertical
+HC-52/8mm, Crystal, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC52-U-3Pin_Vertical
+HC-52/U, Crystal, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC52-U_Horizontal
+HC-51/U, Crystal, length 8.8mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_HC52-U_Horizontal_1EP_style1
+HC-51/U, Crystal, length 8.8mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+3
+3
+Crystal
+Crystal_HC52-U_Horizontal_1EP_style2
+HC-51/U, Crystal, length 8.8mm, width 8.0mm, THT, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+5
+3
+Crystal
+Crystal_HC52-U_Vertical
+HC-52/U, Crystal, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf
+
+0
+2
+2
+Crystal
+Crystal_Round_D1.0mm_Vertical
+DS10, Crystal, length 4.45mm, width 1mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_Round_D1.5mm_Vertical
+DS15, Crystal, length 5mm, width 1.5mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_Round_D2.0mm_Vertical
+DS26, Crystal, length 6mm, width 2mm, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/DS-Series.pdf
+
+0
+2
+2
+Crystal
+Crystal_Round_D3.0mm_Vertical
+C38-LF, Crystal, length 8mm, width 3mm
+
+0
+2
+2
+Crystal
+Crystal_SMD_0603-2Pin_6.0x3.5mm
+SMD0603/2, Crystal, 6.0x3.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-2.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering
+SMD0603/2, Crystal, 6.0x3.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-2.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_0603-4Pin_6.0x3.5mm
+SMD0603/4, Crystal, 6.0x3.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-4.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_0603-4Pin_6.0x3.5mm_HandSoldering
+SMD0603/4, Crystal, 6.0x3.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-4.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_1210-4Pin_1.2x1.0mm
+SMD Crystal SERIES SMD1210/4 https://ecsxtal.com/store/pdf/ECX-1048.pdf, 1.2x1.0mm^2 package
+SMT
+0
+4
+4
+Crystal
+Crystal_SMD_1210-4Pin_1.2x1.0mm_RotB
+SMD1210/4, Crystal, 1.2x1.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://ecsxtal.com/store/pdf/ECX-1048.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_2012-2Pin_2.0x1.2mm
+2012/2, Crystal, 2.0x1.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://txccrystal.com/images/pdf/9ht11.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering
+2012/2, Crystal, 2.0x1.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://txccrystal.com/images/pdf/9ht11.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_2016-4Pin_2.0x1.6mm
+SMD2016/4, Crystal, 2.0x1.6mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.q-crystal.com/upload/5/2015552223166229.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_2520-4Pin_2.5x2.0mm
+SMD2520/4, Crystal, 2.5x2.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.newxtal.com/UploadFiles/Images/2012-11-12-09-29-09-776.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_3215-2Pin_3.2x1.5mm
+SMD Crystal FC-135 https://support.epson.biz/td/api/doc_check.php?dl=brief_FC-135R_en.pdf
+SMD SMT Crystal
+0
+2
+2
+Crystal
+Crystal_SMD_3225-4Pin_3.2x2.5mm
+SMD3225/4, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering
+SMD3225/4, Crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_5032-2Pin_5.0x3.2mm
+SMD2520/2, Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering
+SMD2520/2, Crystal, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_5032-4Pin_5.0x3.2mm
+SMD2520/4, Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_7050-2Pin_7.0x5.0mm
+SMD7050/4, Crystal, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_7050-2Pin_7.0x5.0mm_HandSoldering
+SMD7050/4, Crystal, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_7050-4Pin_7.0x5.0mm
+SMD7050/4, Crystal, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm
+Abracon ABM3, Miniature Ceramic Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Resonators/abm3.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering
+Abracon ABM3, Miniature Ceramic Crystal, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Resonators/abm3.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm
+Abracon ABM3B, Miniature Ceramic Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Resonators/abm3b.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABM3C-4Pin_5.0x3.2mm
+Abracon ABM3C, Miniature Ceramic Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Resonators/abm3c.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABM7-2Pin_6.0x3.5mm
+SMD Crystal Abracon ABM7, https://abracon.com/Resonators/abm7.pdf
+SMD SMT crystal
+0
+2
+2
+Crystal
+Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm
+Abracon Miniature Ceramic Smd Crystal ABM8AIG https://abracon.com/AIGcrystals/ABM8AIG.pdf, 3.2x2.5mm^2 package
+SMD SMT crystal
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm
+Abracon ABM8G, Miniature Ceramic Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Resonators/ABM8G.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm
+Abracon Miniature Ceramic Smd Crystal ABM10 http://www.abracon.com/Resonators/ABM10.pdf
+SMD SMT crystal Abracon ABM10
+0
+4
+4
+Crystal
+Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm
+Abracon Miniature Ceramic SMD Crystal ABS25 https://abracon.com/Resonators/abs25.pdf, 8.0x3.8mm^2 package
+SMD SMT crystal
+0
+4
+4
+Crystal
+Crystal_SMD_ECS_CSM3X-2Pin_7.6x4.1mm
+http://www.ecsxtal.com/store/pdf/CSM-3X.pdf
+Crystal CSM-3X
+0
+2
+2
+Crystal
+Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm
+EuroQuartz EQ161, Crystal, 3.2x1.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/PG32768C.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering
+EuroQuartz EQ161, Crystal, 3.2x1.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/PG32768C.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_EuroQuartz_MJ-4Pin_5.0x3.2mm
+EuroQuartz MJ, Crystal, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MJ.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_MJ-4Pin_5.0x3.2mm_HandSoldering
+EuroQuartz MJ, Crystal, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MJ.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm
+EuroQuartz MQ, Crystal, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm_HandSoldering
+EuroQuartz MQ, Crystal, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_MQ2-2Pin_7.0x5.0mm
+EuroQuartz MQ2, Crystal, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_EuroQuartz_MQ2-2Pin_7.0x5.0mm_HandSoldering
+EuroQuartz MQ2, Crystal, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm
+EuroQuartz MT, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MT.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm_HandSoldering
+EuroQuartz MT, Crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/MT.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm
+EuroQuartz X22, Crystal, 2.5x2.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/DS_X22.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm_HandSoldering
+EuroQuartz X22, Crystal, 2.5x2.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/DS_X22.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_FOX_FE-2Pin_7.5x5.0mm
+Fox FE, crystal Ceramic Resin Sealed, 7.5x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.foxonline.com/pdfs/fe.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_FOX_FE-2Pin_7.5x5.0mm_HandSoldering
+Fox FE, crystal Ceramic Resin Sealed, 7.5x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.foxonline.com/pdfs/fe.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_FOX_FQ7050-2Pin_7.0x5.0mm
+Fox FQ7050, Crystal SMD7050/4, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_FOX_FQ7050-2Pin_7.0x5.0mm_HandSoldering
+Fox FQ7050, Crystal SMD7050/4, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_FOX_FQ7050-4Pin_7.0x5.0mm
+Fox FQ7050, Crystal SMD7050/4, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.foxonline.com/pdfs/FQ7050.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_FrontierElectronics_FM206
+Fronter Electronics FM206, Watch Crystal 6.0mm length 1.9mm diameter, length 6.0mm, width 1.9mm, SMD, http://www.chinafronter.com/wp-content/uploads/2013/12/FM206.pdf
+
+0
+3
+3
+Crystal
+Crystal_SMD_G8-2Pin_3.2x1.5mm
+Diodes Inc. G8, Crystal, 3.2x1.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.diodes.com/datasheet/download/g8.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSoldering
+Diodes Inc. G8, Crystal, 3.2x1.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://www.diodes.com/datasheet/download/g8.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_HC49-SD
+HC-49-SD, Crystal, 11.4x4.7mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/xxx-HC49-SMD.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_HC49-SD_HandSoldering
+HC-49-SD, Crystal, 11.4x4.7mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/xxx-HC49-SMD.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC1V-T1A-2Pin_8.0x3.7mm
+MicroCrystal CC1V-T1A, Crystal, 8.0x3.7mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC1V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC1V-T1A-2Pin_8.0x3.7mm_HandSoldering
+MicroCrystal CC1V-T1A, Crystal, 8.0x3.7mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC1V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC4V-T1A-2Pin_5.0x1.9mm
+MicroCrystal CC4V-T1A, Crystal, 5.0x1.9mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/CC4V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC4V-T1A-2Pin_5.0x1.9mm_HandSoldering
+MicroCrystal CC4V-T1A, Crystal, 5.0x1.9mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/CC4V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC5V-T1A-2Pin_4.1x1.5mm
+MicroCrystal CC5V-T1A, Crystal, 4.1x1.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/CC5V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC5V-T1A-2Pin_4.1x1.5mm_HandSoldering
+MicroCrystal CC5V-T1A, Crystal, 4.1x1.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/CC5V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm
+MicroCrystal CC7V-T1A/CM7V-T1A, Crystal, 3.2x1.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC1V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm_HandSoldering
+MicroCrystal CC7V-T1A/CM7V-T1A, Crystal, 3.2x1.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC1V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm
+MicroCrystal CC8V-T1A/CM8V-T1A, Crystal, 2.0x1.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC8V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm_HandSoldering
+MicroCrystal CC8V-T1A/CM8V-T1A, Crystal, 2.0x1.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC8V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm
+MicroCrystal CM9V-T1A, Crystal, 1.6x1.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CM9V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering
+MicroCrystal CM9V-T1A, Crystal, 1.6x1.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CM9V-T1A.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_MicroCrystal_MS1V-T1K
+MicroCrystal MS1V-T1K, Watch Crystal 6.1mm length 2.0mm diameter, length 6.1mm, width 2.0mm, SMD, https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/MS1V-T1K.pdf
+
+0
+3
+3
+Crystal
+Crystal_SMD_MicroCrystal_MS3V-T1R
+MicroCrystal MS3V-T1R, Watch Crystal 5.2mm length 1.4mm diameter, length 5.2mm, width 1.4mm, SMD, http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/MS3V-T1R.pdf
+
+0
+3
+3
+Crystal
+Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mm
+SMD Crystal Qantek QC5CB, https://www.qantek.com/tl_files/products/crystals/QC5CB.pdf
+SMD SMT crystal
+0
+2
+2
+Crystal
+Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm
+crystal Epson Toyocom FA-128 (https://support.epson.biz/td/api/doc_check.php?dl=brief_FA-128&lang=en), 2x1.6mm^2 package
+SMD SMT crystal
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm
+Epson Toyocom FA-238, crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering
+Epson Toyocom FA-238, crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm
+Epson Toyocom FA-238, crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm_HandSoldering
+Epson Toyocom FA-238, crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MA406-4Pin_11.7x4.0mm
+Seiko Epson MA-406, Crystal, 11.7x4.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MA406-4Pin_11.7x4.0mm_HandSoldering
+Seiko Epson MA-406, Crystal, 11.7x4.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm
+Seiko Epson MC-505, Crystal, 12.7x5.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm_HandSoldering
+Seiko Epson MC-505, Crystal, 12.7x5.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_SeikoEpson_MA506-4Pin_12.7x5.1mm
+Seiko Epson MC-506, Crystal, 12.7x5.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MA506-4Pin_12.7x5.1mm_HandSoldering
+Seiko Epson MC-506, Crystal, 12.7x5.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC146-4Pin_6.7x1.5mm
+Seiko Epson MC-146, Crystal, 6.7x1.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC146-4Pin_6.7x1.5mm_HandSoldering
+Seiko Epson MC-146, Crystal, 6.7x1.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC156-4Pin_7.1x2.5mm
+Seiko Epson MC-156, Crystal, 7.1x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC156-4Pin_7.1x2.5mm_HandSoldering
+Seiko Epson MC-156, Crystal, 7.1x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm
+Seiko Epson MC-306, Crystal, 8.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering
+Seiko Epson MC-306, Crystal, 8.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm
+Seiko Epson MC-405, Crystal Seiko Epson MC-405, 9.6x4.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-405_en.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm_HandSoldering
+Seiko Epson MC-405, Crystal Seiko Epson MC-405, 9.6x4.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-405_en.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_SeikoEpson_MC406-4Pin_9.6x4.1mm
+Seiko Epson MC-406, crystal, 9.6x4.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-406_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_MC406-4Pin_9.6x4.1mm_HandSoldering
+Seiko Epson MC-406, crystal, 9.6x4.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-406_en.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm
+Epson Toyocom TSX-3225, crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering
+Epson Toyocom TSX-3225, crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.mouser.com/ds/2/137/1721499-465440.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_TXC_7A-2Pin_5x3.2mm
+SMD Crystal TXC 7A http://txccrystal.com/images/pdf/7a.pdf
+SMD SMT crystal
+0
+2
+2
+Crystal
+Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm
+TXC 7M, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm_HandSoldering
+TXC 7M, Crystal, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf
+
+0
+4
+4
+Crystal
+Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm
+TXC 9HT11, Crystal, 2.0x1.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://txccrystal.com/images/pdf/9ht11.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm_HandSoldering
+TXC 9HT11, Crystal, 2.0x1.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://txccrystal.com/images/pdf/9ht11.pdf
+
+0
+2
+2
+Crystal
+Crystal_SMD_TXC_AX_8045-2Pin_8.0x4.5mm
+http://www.txccrystal.com/images/pdf/ax-automotive.pdf
+SMD SMT crystal
+0
+2
+2
+Crystal
+Resonator-2Pin_W6.0mm_H3.0mm
+Ceramic Resonator/Filter, length 3.0mm, width 6.0mm, 2 pins
+ceramic
+0
+2
+2
+Crystal
+Resonator-2Pin_W7.0mm_H2.5mm
+Ceramic Resonator/Filter, length 2.5mm, width 7.0mm, 2 pins
+ceramic
+0
+2
+2
+Crystal
+Resonator-2Pin_W8.0mm_H3.5mm
+Ceramic Resonator/Filter, length 3.5mm, width 8.0mm, 2 pins
+ceramic
+0
+2
+2
+Crystal
+Resonator-2Pin_W10.0mm_H5.0mm
+RedFrequency MG/MT/MX, Ceramic Resonator/Filter, length 5.0mm, width 10.0mm, 2 pins, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf
+
+0
+2
+2
+Crystal
+Resonator-3Pin_W6.0mm_H3.0mm
+Ceramic Resonator/Filter, length 3.0mm, width 6.0mm, 3 pins
+ceramic
+0
+3
+3
+Crystal
+Resonator-3Pin_W7.0mm_H2.5mm
+Ceramic Resonator/Filter, length 2.5mm, width 7.0mm, 3 pins
+ceramic
+0
+3
+3
+Crystal
+Resonator-3Pin_W8.0mm_H3.5mm
+Ceramic Resonator/Filter, length 3.5mm, width 8.0mm, 3 pins
+ceramic
+0
+3
+3
+Crystal
+Resonator-3Pin_W10.0mm_H5.0mm
+RedFrequency MG/MT/MX, Ceramic Resonator/Filter, 3-pin, length 5.0mm, width 10.0mm, 3 pins, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_Murata_CSTLSxxxG-3Pin_W8.0mm_H3.0mm
+Murata CSTLSxxxG, Ceramic Resonator/Filter, length 3.0mm, width 8.0mm, 3 pins, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/timingdevice/ceralock/p17e.ashx
+ceramic
+0
+3
+3
+Crystal
+Resonator_Murata_CSTLSxxxX-3Pin_W5.5mm_H3.0mm
+Murata CSTLSxxxX, Ceramic Resonator/Filter, length 3.0mm, width 5.5mm, 3 pins, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/timingdevice/ceralock/p17e.ashx
+ceramic
+0
+3
+3
+Crystal
+Resonator_Murata_DSN6-3Pin_W7.0mm_H2.5mm
+Murata DSN6, Ceramic Resonator/Filter, length 2.5mm, width 7.0mm, 3 pins, http://cdn-reichelt.de/documents/datenblatt/B400/DSN6NC51H.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_Murata_DSS6-3Pin_W7.0mm_H2.5mm
+Murata DSS6, Ceramic Resonator/Filter, length 2.5mm, width 7.0mm, 3 pins, http://cdn-reichelt.de/documents/datenblatt/B400/DSN6NC51H.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD-3Pin_7.2x3.0mm
+Murata CSTCC8M00G53-R0, Resonator/Filter, 8MHz, 7.2x3.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.farnell.com/datasheets/19296.pdf?_ga=1.247244932.122297557.1475167906
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD-3Pin_7.2x3.0mm_HandSoldering
+Murata CSTCC8M00G53-R0, Resonator/Filter, 8MHz, 7.2x3.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.farnell.com/datasheets/19296.pdf?_ga=1.247244932.122297557.1475167906
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_CDSCB-2Pin_4.5x2.0mm
+Murata CDSCB, Resonator/Filter, 4.5x2.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+2
+2
+Crystal
+Resonator_SMD_Murata_CDSCB-2Pin_4.5x2.0mm_HandSoldering
+Murata CDSCB, Resonator/Filter, 4.5x2.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+2
+2
+Crystal
+Resonator_SMD_Murata_CSTCR_4.5x2x1.15mm
+Piezoelectric Ceramic Resonator, 4.5mm x 2mm x 1.15mm, https://www.murata.com/products/productdata/8801051639838/SPEC-CSTCR4M00G53-R0.pdf?1517839209000
+Crystal Oscillator
+0
+9
+3
+Crystal
+Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm
+SMD Resomator/Filter Murata CSTCE, https://www.murata.com/en-eu/products/productdata/8801162264606/SPEC-CSTNE16M0VH3C000R0.pdf
+SMD SMT ceramic resonator filter
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering
+SMD Resomator/Filter Murata CSTCE, https://www.murata.com/en-eu/products/productdata/8801162264606/SPEC-CSTNE16M0VH3C000R0.pdf
+SMD SMT ceramic resonator filter
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_SFECV-3Pin_6.9x2.9mm
+Murata SFECV, Resonator/Filter, 6.9x2.9mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_SFECV-3Pin_6.9x2.9mm_HandSoldering
+Murata SFECV, Resonator/Filter, 6.9x2.9mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_SFSKA-3Pin_7.9x3.8mm
+Murata SFSKA, Resonator/Filter, 7.9x3.8mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_SFSKA-3Pin_7.9x3.8mm_HandSoldering
+Murata SFSKA, Resonator/Filter, 7.9x3.8mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_TPSKA-3Pin_7.9x3.8mm
+Murata TPSKA, Resonator/Filter, 7.9x3.8mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Crystal
+Resonator_SMD_Murata_TPSKA-3Pin_7.9x3.8mm_HandSoldering
+Murata TPSKA, Resonator/Filter, 7.9x3.8mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf
+ceramic
+0
+3
+3
+Diode_SMD
+D_0201_0603Metric
+Diode SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+diode
+0
+4
+2
+Diode_SMD
+D_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+Diode SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+4
+2
+Diode_SMD
+D_0402_1005Metric
+Diode SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_0402_1005Metric_Pad0.77x0.64mm_HandSolder
+Diode SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_0603_1608Metric
+Diode SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_0603_1608Metric_Pad1.05x0.95mm_HandSolder
+Diode SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_0805_2012Metric
+Diode SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_0805_2012Metric_Pad1.15x1.40mm_HandSolder
+Diode SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_01005_0402Metric
+Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+diode
+0
+4
+2
+Diode_SMD
+D_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+4
+2
+Diode_SMD
+D_1206_3216Metric
+Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_1206_3216Metric_Pad1.42x1.75mm_HandSolder
+Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_1210_3225Metric
+Diode SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_1210_3225Metric_Pad1.42x2.65mm_HandSolder
+Diode SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_1812_4532Metric
+Diode SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_1812_4532Metric_Pad1.30x3.40mm_HandSolder
+Diode SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_2010_5025Metric
+Diode SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_2010_5025Metric_Pad1.52x2.65mm_HandSolder
+Diode SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_2114_3652Metric
+Diode SMD 2114 (3652 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_2114_3652Metric_Pad1.85x3.75mm_HandSolder
+Diode SMD 2114 (3652 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_2512_6332Metric
+Diode SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_2512_6332Metric_Pad1.52x3.35mm_HandSolder
+Diode SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_3220_8050Metric
+Diode SMD 3220 (8050 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator
+diode
+0
+2
+2
+Diode_SMD
+D_3220_8050Metric_Pad2.65x5.15mm_HandSolder
+Diode SMD 3220 (8050 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator
+diode handsolder
+0
+2
+2
+Diode_SMD
+D_MELF
+Diode, MELF,,
+Diode MELF 
+0
+2
+2
+Diode_SMD
+D_MELF-RM10_Universal_Handsoldering
+Diode, Universal, MELF, RM10, Handsoldering, SMD, Thruhole,
+Diode Universal MELF RM10 Handsoldering SMD Thruhole 
+0
+2
+2
+Diode_SMD
+D_MELF_Handsoldering
+Diode MELF Handsoldering
+Diode MELF Handsoldering
+0
+2
+2
+Diode_SMD
+D_MicroMELF
+Diode, MicroMELF, Reflow Soldering, http://www.vishay.com/docs/85597/bzm55.pdf
+MicroMELF Diode
+0
+2
+2
+Diode_SMD
+D_MicroMELF_Handsoldering
+Diode, MicroMELF, Hand Soldering, http://www.vishay.com/docs/85597/bzm55.pdf
+MicroMELF Diode
+0
+2
+2
+Diode_SMD
+D_MicroSMP_AK
+Diode MicroSMP (DO-219AD), large-pad cathode, https://www.vishay.com/docs/89020/mss1p3l.pdf
+Diode MicroSMP (DO-219AD)
+0
+2
+2
+Diode_SMD
+D_MicroSMP_KA
+Diode MicroSMP (DO-219AD), large-pad anode, https://www.vishay.com/docs/89457/msmp6a.pdf
+Diode MicroSMP (DO-219AD)
+0
+2
+2
+Diode_SMD
+D_MiniMELF
+Diode Mini-MELF (SOD-80)
+Diode Mini-MELF (SOD-80)
+0
+2
+2
+Diode_SMD
+D_MiniMELF_Handsoldering
+Diode Mini-MELF (SOD-80) Handsoldering
+Diode Mini-MELF (SOD-80) Handsoldering
+0
+2
+2
+Diode_SMD
+D_PowerDI-5
+PowerDI,Diode,Vishay,https://www.diodes.com/assets/Package-Files/PowerDI5.pdf
+PowerDI diode vishay
+0
+3
+2
+Diode_SMD
+D_PowerDI-123
+http://www.diodes.com/_files/datasheets/ds30497.pdf
+PowerDI diode vishay
+0
+2
+2
+Diode_SMD
+D_Powermite2_AK
+Microsemi Powermite 2 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5341)
+PowerMite2
+0
+2
+2
+Diode_SMD
+D_Powermite2_KA
+Microsemi Powermite 2 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5341)
+PowerMite2
+0
+2
+2
+Diode_SMD
+D_Powermite3
+Microsemi Powermite 3 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5340)
+PowerMite3
+0
+3
+3
+Diode_SMD
+D_Powermite_AK
+Microsemi Powermite SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5339, https://www.onsemi.com/pub/Collateral/457-04.PDF)
+Powermite
+0
+2
+2
+Diode_SMD
+D_Powermite_KA
+Microsemi Powermite SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5339, https://www.onsemi.com/pub/Collateral/457-04.PDF)
+Powermite
+0
+2
+2
+Diode_SMD
+D_QFN_3.3x3.3mm_P0.65mm
+QFN, diode, 3.3x3.3x1mm (https://www.wolfspeed.com/media/downloads/846/C3D1P7060Q.pdf)
+diode qfn 3.3
+0
+3
+2
+Diode_SMD
+D_SC-80
+JEITA SC-80
+SC-80
+0
+2
+2
+Diode_SMD
+D_SC-80_HandSoldering
+JEITA SC-80
+SC-80
+0
+2
+2
+Diode_SMD
+D_SMA
+Diode SMA (DO-214AC)
+Diode SMA (DO-214AC)
+0
+2
+2
+Diode_SMD
+D_SMA-SMB_Universal_Handsoldering
+Diode, Universal, SMA (DO-214AC) or SMB (DO-214AA), Handsoldering,
+Diode Universal SMA (DO-214AC) SMB (DO-214AA) Handsoldering 
+0
+2
+2
+Diode_SMD
+D_SMA_Handsoldering
+Diode SMA (DO-214AC) Handsoldering
+Diode SMA (DO-214AC) Handsoldering
+0
+2
+2
+Diode_SMD
+D_SMB
+Diode SMB (DO-214AA)
+Diode SMB (DO-214AA)
+0
+2
+2
+Diode_SMD
+D_SMB-SMC_Universal_Handsoldering
+Diode, Universal, SMB(DO-214AA) or SMC (DO-214AB), Handsoldering,
+Diode Universal SMB(DO-214AA) SMC (DO-214AB) Handsoldering 
+0
+2
+2
+Diode_SMD
+D_SMB_Handsoldering
+Diode SMB (DO-214AA) Handsoldering
+Diode SMB (DO-214AA) Handsoldering
+0
+2
+2
+Diode_SMD
+D_SMB_Modified
+Diode SMB (DO-214AA) Modified (http://www.littelfuse.com/~/media/electronics/datasheets/sidactors/littelfuse_sidactor_battrax_positive_negative_modified_do_214_datasheet.pdf.pdf)
+Diode SMB (DO-214AA)
+0
+3
+3
+Diode_SMD
+D_SMC
+Diode SMC (DO-214AB)
+Diode SMC (DO-214AB)
+0
+2
+2
+Diode_SMD
+D_SMC-RM10_Universal_Handsoldering
+Diode, Universal, SMC (DO-214AB), RM10, Handsoldering, SMD, Thruhole
+Diode Universal SMC (DO-214AB) RM10 Handsoldering SMD Thruhole
+0
+2
+2
+Diode_SMD
+D_SMC_Handsoldering
+Diode SMC (DO-214AB) Handsoldering
+Diode SMC (DO-214AB) Handsoldering
+0
+2
+2
+Diode_SMD
+D_SMF
+Diode SMF (DO-219AB), http://www.vishay.com/docs/95572/smf_do-219ab.pdf
+Diode SMF (DO-214AB)
+0
+2
+2
+Diode_SMD
+D_SMP_DO-220AA
+SMP DO-220AA (https://www.vishay.com/docs/89016/esh2pb.pdf)
+SMP DO-220AA
+0
+2
+2
+Diode_SMD
+D_SOD-110
+SOD-110
+SOD-110
+0
+2
+2
+Diode_SMD
+D_SOD-123
+SOD-123
+SOD-123
+0
+2
+2
+Diode_SMD
+D_SOD-123F
+D_SOD-123F
+D_SOD-123F
+0
+2
+2
+Diode_SMD
+D_SOD-128
+D_SOD-128 (CFP5 SlimSMAW), https://assets.nexperia.com/documents/outline-drawing/SOD128.pdf
+D_SOD-128
+0
+2
+2
+Diode_SMD
+D_SOD-323
+SOD-323
+SOD-323
+0
+2
+2
+Diode_SMD
+D_SOD-323F
+SOD-323F http://www.nxp.com/documents/outline_drawing/SOD323F.pdf
+SOD-323F
+0
+2
+2
+Diode_SMD
+D_SOD-323_HandSoldering
+SOD-323
+SOD-323
+0
+2
+2
+Diode_SMD
+D_SOD-523
+http://www.diodes.com/datasheets/ap02001.pdf p.144
+Diode SOD523
+0
+2
+2
+Diode_SMD
+D_SOD-882
+SOD-882, DFN1006-2, body 1.0 x 0.6 x 0.48mm, pitch 0.65mm, https://assets.nexperia.com/documents/package-information/SOD882.pdf
+Diode SOD882 DFN1006-2
+0
+4
+2
+Diode_SMD
+D_SOD-882D
+SOD-882D, DFN1006D-2, body 1.0 x 0.6 x 0.4mm, pitch 0.65mm, https://assets.nexperia.com/documents/package-information/SOD882D.pdf
+Diode SOD882D DFN1006D-2
+0
+4
+2
+Diode_SMD
+D_SOD-923
+https://www.onsemi.com/pub/Collateral/ESD9B-D.PDF#page=4
+Diode SOD923
+0
+2
+2
+Diode_SMD
+D_TUMD2
+ROHM - TUMD2
+TUMD2
+0
+2
+2
+Diode_SMD
+Diode_Bridge_Bourns_CD-DF4xxS
+8.1x10.5mm, 4A, single phase bridge rectifier, https://www.bourns.com/docs/Product-Datasheets/CD-DF4xxSL.pdf
+Surface Mount Bridge Rectifier Diode
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Diotec_ABS
+SMD diode bridge ABS (Diotec), see https://diotec.com/tl_files/diotec/files/pdf/datasheets/abs2.pdf
+ABS MBLS
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Diotec_MicroDil_3.0x3.0x1.8mm
+SMD package Diotec Diotec MicroDil, body 3.0x3.0x1.8mm (e.g. diode bridge), see https://diotec.com/tl_files/diotec/files/pdf/datasheets/mys40.pdf
+Diotec MicroDil diode bridge
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Diotec_SO-DIL-Slim
+SMD diode bridge Diotec SO-DIL Slim, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40fs.pdf
+DFS SO-DIL Slim
+0
+4
+4
+Diode_SMD
+Diode_Bridge_OnSemi_SDIP-4L
+SMD diode bridge OnSemi SDIP-4L, see https://www.onsemi.com/pdf/datasheet/df10s1-d.pdf
+OnSemi Diode Bridge SDIP-4L
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Vishay_DFS
+SMD diode bridge DFS, see http://www.vishay.com/docs/88854/padlayouts.pdf
+DFS
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Vishay_DFSFlat
+SMD diode bridge Low Profile DFS "Flat", see http://www.vishay.com/docs/88874/dfl15005.pdf
+DFS
+0
+4
+4
+Diode_SMD
+Diode_Bridge_Vishay_MBLS
+SMD diode bridge MBLS, see http://www.vishay.com/docs/89959/mbl104s.pdf http://www.vishay.com/docs/88854/padlayouts.pdf
+DFS
+0
+4
+4
+Diode_SMD
+Infineon_SG-WLL-2-3_0.58x0.28_P0.36mm
+Infineon  SG-WLL-2-3, 0.58x0.28x0.15mm, https://www.infineon.com/dgdl/Infineon-SG-WLL-2-3_SPO_PDF-Package-v02_00-EN.pdf?fileId=5546d46271bf4f9201723159ce71239d
+Infineon WLL
+0
+4
+2
+Diode_SMD
+Littelfuse_PolyZen-LS
+http://m.littelfuse.com/~/media/electronics/datasheets/polyzen_devices/littelfuse_polyzen_standard_polyzen_catalog_datasheet.pdf.pdf
+Diode Polymer Protected Zener Diode Littelfuse LS
+0
+3
+3
+Diode_SMD
+Nexperia_CFP3_SOD-123W
+Nexperia CFP3 (SOD-123W), https://assets.nexperia.com/documents/outline-drawing/SOD123W.pdf
+CFP3 SOD-123W
+0
+2
+2
+Diode_SMD
+Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm
+SOD962-2 silicon, leadless ultra small package; 2 terminals; 0.4 mm pitch; 0.6 mm x 0.3 mm x 0.3 mm body (https://assets.nexperia.com/documents/package-information/SOD962-2.pdf https://www.nexperia.com/packages/SOD962-2.html)
+TVS protection diodes
+0
+2
+2
+Diode_SMD
+Nexperia_DSN1608-2_1.6x0.8mm
+Diode SMD DSN1608, 1.6 x 0.8 x 0.29 mm, https://assets.nexperia.com/documents/package-information/SOD964.pdf
+diode SOD964 SOD-964
+0
+2
+2
+Diode_SMD
+ST_D_SMC
+STMicroelectronics SMC (JEDEC DO-214-D, variant AB), https://www.st.com/resource/en/datasheet/sm15t36a.pdf#page=7
+Diode DO-214AB
+0
+2
+2
+Diode_SMD
+ST_QFN-2L_1.6x1.0mm
+Unidirectional high power transient voltage suppressor (https://www.st.com/resource/en/datasheet/esda7p120-1u1m.pdf)
+QFN-2L Diode
+0
+2
+2
+Diode_SMD
+Vishay_SMPA
+Diode SMPA (DO-221BC), https://www.vishay.com/docs/87659/v8pa10.pdf
+Diode SMPA (DO-221BC)
+0
+2
+2
+Diode_THT
+D_5KPW_P7.62mm_Vertical_AnodeUp
+Diode, 5KPW series, Axial, Vertical, pin pitch=7.62mm, length*diameter=9*8mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KPW series Axial Vertical pin pitch 7.62mm  length 9mm diameter 8mm
+0
+2
+2
+Diode_THT
+D_5KPW_P7.62mm_Vertical_KathodeUp
+Diode, 5KPW series, Axial, Vertical, pin pitch=7.62mm, length*diameter=9*8mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KPW series Axial Vertical pin pitch 7.62mm  length 9mm diameter 8mm
+0
+2
+2
+Diode_THT
+D_5KPW_P12.70mm_Horizontal
+Diode, 5KPW series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9*8mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KPW series Axial Horizontal pin pitch 12.7mm  length 9mm diameter 8mm
+0
+2
+2
+Diode_THT
+D_5KP_P7.62mm_Vertical_AnodeUp
+Diode, 5KP series, Axial, Vertical, pin pitch=7.62mm, length*diameter=7.62*9.53mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KP series Axial Vertical pin pitch 7.62mm  length 7.62mm diameter 9.53mm
+0
+2
+2
+Diode_THT
+D_5KP_P7.62mm_Vertical_KathodeUp
+Diode, 5KP series, Axial, Vertical, pin pitch=7.62mm, length*diameter=7.62*9.53mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KP series Axial Vertical pin pitch 7.62mm  length 7.62mm diameter 9.53mm
+0
+2
+2
+Diode_THT
+D_5KP_P10.16mm_Horizontal
+Diode, 5KP series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=7.62*9.53mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KP series Axial Horizontal pin pitch 10.16mm  length 7.62mm diameter 9.53mm
+0
+2
+2
+Diode_THT
+D_5KP_P12.70mm_Horizontal
+Diode, 5KP series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=7.62*9.53mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5KP series Axial Horizontal pin pitch 12.7mm  length 7.62mm diameter 9.53mm
+0
+2
+2
+Diode_THT
+D_5W_P5.08mm_Vertical_AnodeUp
+Diode, 5W series, Axial, Vertical, pin pitch=5.08mm, length*diameter=8.9*3.7mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5W series Axial Vertical pin pitch 5.08mm  length 8.9mm diameter 3.7mm
+0
+2
+2
+Diode_THT
+D_5W_P5.08mm_Vertical_KathodeUp
+Diode, 5W series, Axial, Vertical, pin pitch=5.08mm, length*diameter=8.9*3.7mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5W series Axial Vertical pin pitch 5.08mm  length 8.9mm diameter 3.7mm
+0
+2
+2
+Diode_THT
+D_5W_P10.16mm_Horizontal
+Diode, 5W series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=8.9*3.7mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5W series Axial Horizontal pin pitch 10.16mm  length 8.9mm diameter 3.7mm
+0
+2
+2
+Diode_THT
+D_5W_P12.70mm_Horizontal
+Diode, 5W series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=8.9*3.7mm^2, http://www.diodes.com/_files/packages/8686949.gif
+Diode 5W series Axial Horizontal pin pitch 12.7mm  length 8.9mm diameter 3.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P2.54mm_Vertical_AnodeUp
+Diode, A-405 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Vertical pin pitch 2.54mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P2.54mm_Vertical_KathodeUp
+Diode, A-405 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Vertical pin pitch 2.54mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P5.08mm_Vertical_AnodeUp
+Diode, A-405 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Vertical pin pitch 5.08mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P5.08mm_Vertical_KathodeUp
+Diode, A-405 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Vertical pin pitch 5.08mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P7.62mm_Horizontal
+Diode, A-405 series, Axial, Horizontal, pin pitch=7.62mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Horizontal pin pitch 7.62mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P10.16mm_Horizontal
+Diode, A-405 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Horizontal pin pitch 10.16mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_A-405_P12.70mm_Horizontal
+Diode, A-405 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=5.2*2.7mm^2, http://www.diodes.com/_files/packages/A-405.pdf
+Diode A-405 series Axial Horizontal pin pitch 12.7mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-15_P2.54mm_Vertical_AnodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 2.54mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P2.54mm_Vertical_KathodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 2.54mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P3.81mm_Vertical_AnodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 3.81mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P3.81mm_Vertical_KathodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 3.81mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P5.08mm_Vertical_AnodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 5.08mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P5.08mm_Vertical_KathodeUp
+Diode, DO-15 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Vertical pin pitch 5.08mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P10.16mm_Horizontal
+Diode, DO-15 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Horizontal pin pitch 10.16mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P12.70mm_Horizontal
+Diode, DO-15 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Horizontal pin pitch 12.7mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-15_P15.24mm_Horizontal
+Diode, DO-15 series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=7.6*3.6mm^2, http://www.diodes.com/_files/packages/DO-15.pdf
+Diode DO-15 series Axial Horizontal pin pitch 15.24mm  length 7.6mm diameter 3.6mm
+0
+2
+2
+Diode_THT
+D_DO-27_P5.08mm_Vertical_AnodeUp
+Diode, DO-27 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.52*5.33mm^2, http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg
+Diode DO-27 series Axial Vertical pin pitch 5.08mm  length 9.52mm diameter 5.33mm
+0
+2
+2
+Diode_THT
+D_DO-27_P5.08mm_Vertical_KathodeUp
+Diode, DO-27 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.52*5.33mm^2, http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg
+Diode DO-27 series Axial Vertical pin pitch 5.08mm  length 9.52mm diameter 5.33mm
+0
+2
+2
+Diode_THT
+D_DO-27_P12.70mm_Horizontal
+Diode, DO-27 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9.52*5.33mm^2, http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg
+Diode DO-27 series Axial Horizontal pin pitch 12.7mm  length 9.52mm diameter 5.33mm
+0
+2
+2
+Diode_THT
+D_DO-27_P15.24mm_Horizontal
+Diode, DO-27 series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=9.52*5.33mm^2, http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg
+Diode DO-27 series Axial Horizontal pin pitch 15.24mm  length 9.52mm diameter 5.33mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp
+Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Vertical pin pitch 2.54mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P2.54mm_Vertical_KathodeUp
+Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Vertical pin pitch 2.54mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P5.08mm_Vertical_AnodeUp
+Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Vertical pin pitch 5.08mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P5.08mm_Vertical_KathodeUp
+Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Vertical pin pitch 5.08mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P7.62mm_Horizontal
+Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=7.62mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Horizontal pin pitch 7.62mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P10.16mm_Horizontal
+Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Horizontal pin pitch 10.16mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-34_SOD68_P12.70mm_Horizontal
+Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=3.04*1.6mm^2, https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf
+Diode DO-34_SOD68 series Axial Horizontal pin pitch 12.7mm  length 3.04mm diameter 1.6mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 2.54mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 2.54mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P3.81mm_Vertical_AnodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 3.81mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P3.81mm_Vertical_KathodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 3.81mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 5.08mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P5.08mm_Vertical_KathodeUp
+Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Vertical pin pitch 5.08mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P7.62mm_Horizontal
+Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=7.62mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Horizontal pin pitch 7.62mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P10.16mm_Horizontal
+Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Horizontal pin pitch 10.16mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-35_SOD27_P12.70mm_Horizontal
+Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=4*2mm^2, http://www.diodes.com/_files/packages/DO-35.pdf
+Diode DO-35_SOD27 series Axial Horizontal pin pitch 12.7mm  length 4mm diameter 2mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 2.54mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 2.54mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P3.81mm_Vertical_AnodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 3.81mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P3.81mm_Vertical_KathodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 3.81mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 5.08mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P5.08mm_Vertical_KathodeUp
+Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Vertical pin pitch 5.08mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P7.62mm_Horizontal
+Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=7.62mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Horizontal pin pitch 7.62mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P10.16mm_Horizontal
+Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Horizontal pin pitch 10.16mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-41_SOD81_P12.70mm_Horizontal
+Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=5.2*2.7mm^2, https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf
+Diode DO-41_SOD81 series Axial Horizontal pin pitch 12.7mm  length 5.2mm diameter 2.7mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P3.81mm_Vertical_AnodeUp
+Diode, DO-201AD series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Vertical pin pitch 3.81mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P3.81mm_Vertical_KathodeUp
+Diode, DO-201AD series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Vertical pin pitch 3.81mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P5.08mm_Vertical_AnodeUp
+Diode, DO-201AD series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Vertical pin pitch 5.08mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P5.08mm_Vertical_KathodeUp
+Diode, DO-201AD series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Vertical pin pitch 5.08mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P12.70mm_Horizontal
+Diode, DO-201AD series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Horizontal pin pitch 12.7mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AD_P15.24mm_Horizontal
+Diode, DO-201AD series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=9.5*5.2mm^2, http://www.diodes.com/_files/packages/DO-201AD.pdf
+Diode DO-201AD series Axial Horizontal pin pitch 15.24mm  length 9.5mm diameter 5.2mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P3.81mm_Vertical_AnodeUp
+Diode, DO-201AE series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Vertical pin pitch 3.81mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P3.81mm_Vertical_KathodeUp
+Diode, DO-201AE series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Vertical pin pitch 3.81mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P5.08mm_Vertical_AnodeUp
+Diode, DO-201AE series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Vertical pin pitch 5.08mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P5.08mm_Vertical_KathodeUp
+Diode, DO-201AE series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Vertical pin pitch 5.08mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P12.70mm_Horizontal
+Diode, DO-201AE series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Horizontal pin pitch 12.7mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201AE_P15.24mm_Horizontal
+Diode, DO-201AE series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=9*5.3mm^2, http://www.farnell.com/datasheets/529758.pdf
+Diode DO-201AE series Axial Horizontal pin pitch 15.24mm  length 9mm diameter 5.3mm
+0
+2
+2
+Diode_THT
+D_DO-201_P3.81mm_Vertical_AnodeUp
+Diode, DO-201 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Vertical pin pitch 3.81mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-201_P3.81mm_Vertical_KathodeUp
+Diode, DO-201 series, Axial, Vertical, pin pitch=3.81mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Vertical pin pitch 3.81mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-201_P5.08mm_Vertical_AnodeUp
+Diode, DO-201 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Vertical pin pitch 5.08mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-201_P5.08mm_Vertical_KathodeUp
+Diode, DO-201 series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Vertical pin pitch 5.08mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-201_P12.70mm_Horizontal
+Diode, DO-201 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Horizontal pin pitch 12.7mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-201_P15.24mm_Horizontal
+Diode, DO-201 series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=9.53*5.21mm^2, http://www.diodes.com/_files/packages/DO-201.pdf
+Diode DO-201 series Axial Horizontal pin pitch 15.24mm  length 9.53mm diameter 5.21mm
+0
+2
+2
+Diode_THT
+D_DO-247_Horizontal_TabDown
+Diode, DO-247 series, Horizontal, TabDown, P 10.9mm
+diode rectifier
+0
+2
+2
+Diode_THT
+D_DO-247_Horizontal_TabUp
+Diode, DO-247 series, Horizontal, TabUp, P 10.9mm
+diode rectifier
+0
+2
+2
+Diode_THT
+D_DO-247_Vertical
+Diode, DO-247 series, Vertical, P 10.9mm
+diode rectifier
+0
+2
+2
+Diode_THT
+D_P600_R-6_P7.62mm_Vertical_AnodeUp
+Diode, P600_R-6 series, Axial, Vertical, pin pitch=7.62mm, length*diameter=9.1*9.1mm^2, http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf
+Diode P600_R-6 series Axial Vertical pin pitch 7.62mm  length 9.1mm diameter 9.1mm
+0
+2
+2
+Diode_THT
+D_P600_R-6_P7.62mm_Vertical_KathodeUp
+Diode, P600_R-6 series, Axial, Vertical, pin pitch=7.62mm, length*diameter=9.1*9.1mm^2, http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf
+Diode P600_R-6 series Axial Vertical pin pitch 7.62mm  length 9.1mm diameter 9.1mm
+0
+2
+2
+Diode_THT
+D_P600_R-6_P12.70mm_Horizontal
+Diode, P600_R-6 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9.1*9.1mm^2, http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf
+Diode P600_R-6 series Axial Horizontal pin pitch 12.7mm  length 9.1mm diameter 9.1mm
+0
+2
+2
+Diode_THT
+D_P600_R-6_P20.00mm_Horizontal
+Diode, P600_R-6 series, Axial, Horizontal, pin pitch=20mm, length*diameter=9.1*9.1mm^2, http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf
+Diode P600_R-6 series Axial Horizontal pin pitch 20mm  length 9.1mm diameter 9.1mm
+0
+2
+2
+Diode_THT
+D_T-1_P2.54mm_Vertical_AnodeUp
+Diode, T-1 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=3.2*2.6mm^2, http://www.diodes.com/_files/packages/T-1.pdf
+Diode T-1 series Axial Vertical pin pitch 2.54mm  length 3.2mm diameter 2.6mm
+0
+2
+2
+Diode_THT
+D_T-1_P2.54mm_Vertical_KathodeUp
+Diode, T-1 series, Axial, Vertical, pin pitch=2.54mm, length*diameter=3.2*2.6mm^2, http://www.diodes.com/_files/packages/T-1.pdf
+Diode T-1 series Axial Vertical pin pitch 2.54mm  length 3.2mm diameter 2.6mm
+0
+2
+2
+Diode_THT
+D_T-1_P5.08mm_Horizontal
+Diode, T-1 series, Axial, Horizontal, pin pitch=5.08mm, length*diameter=3.2*2.6mm^2, http://www.diodes.com/_files/packages/T-1.pdf
+Diode T-1 series Axial Horizontal pin pitch 5.08mm  length 3.2mm diameter 2.6mm
+0
+2
+2
+Diode_THT
+D_T-1_P10.16mm_Horizontal
+Diode, T-1 series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=3.2*2.6mm^2, http://www.diodes.com/_files/packages/T-1.pdf
+Diode T-1 series Axial Horizontal pin pitch 10.16mm  length 3.2mm diameter 2.6mm
+0
+2
+2
+Diode_THT
+D_T-1_P12.70mm_Horizontal
+Diode, T-1 series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=3.2*2.6mm^2, http://www.diodes.com/_files/packages/T-1.pdf
+Diode T-1 series Axial Horizontal pin pitch 12.7mm  length 3.2mm diameter 2.6mm
+0
+2
+2
+Diode_THT
+Diode_Bridge_15.1x15.1x6.3mm_P10.9mm
+Single phase bridge rectifier case 15.1x15.1mm, pitch 10.9mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/pb1000.pdf
+Diode Bridge PB10xxS
+0
+4
+4
+Diode_THT
+Diode_Bridge_15.2x15.2x6.3mm_P10.9mm
+Single phase bridge rectifier case 15.2x15.2mm, pitch 10.9mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/kbpc600.pdf
+Diode Bridge KBPC6xx
+0
+4
+4
+Diode_THT
+Diode_Bridge_15.7x15.7x6.3mm_P10.8mm
+Single phase bridge rectifier case 15.7x15.7
+Diode Bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_16.7x16.7x6.3mm_P10.8mm
+Single phase bridge rectifier case 16.7x16.7
+Diode Bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_19.0x3.5x10.0mm_P5.0mm
+Vishay GBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88606/g3sba20.pdf
+Vishay GBU rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_19.0x19.0x6.8mm_P12.7mm
+Single phase bridge rectifier case 19x19mm, pitch 12.7mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/pb1000.pdf
+Diode Bridge PB10xx
+0
+4
+4
+Diode_THT
+Diode_Bridge_28.6x28.6x7.3mm_P18.0mm_P11.6mm
+Single phase bridge rectifier case 28.6x28.6mm, pitch 18.0mm & 11.6mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/kbpc1500fw.pdf
+Diode Bridge KBPCxxxxWP
+0
+4
+4
+Diode_THT
+Diode_Bridge_32.0x5.6x17.0mm_P10.0mm_P7.5mm
+Diotec 32x5.6x17mm rectifier package, 7.5mm/10mm pitch, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40c3700.pdf
+Diotec rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Comchip_SCVB-L
+Three phase, Bridge, Rectifier, https://www.comchiptech.com/admin/files/product/SC35VB80S-G%20Thru506369.%20SC35VB160S-G%20RevB.pdf
+diode module
+0
+5
+5
+Diode_THT
+Diode_Bridge_DIGITRON_KBPC_T
+Single phase, Bridge rectifier, 28.614x28.614mm, case KBPC_T(FP), https://www.digitroncorp.com/Digitron/media/Files/Datasheets/KBPC15005-SERIES.pdf
+diode module
+0
+4
+4
+Diode_THT
+Diode_Bridge_DIP-4_W5.08mm_P2.54mm
+4-lead dip package for diode bridges, row spacing 5.08mm, pin-spacing 2.54mm, see http://www.vishay.com/docs/88898/b2m.pdf
+DIL DIP PDIP 5.08mm 2.54
+0
+4
+4
+Diode_THT
+Diode_Bridge_DIP-4_W7.62mm_P5.08mm
+4-lead dip package for diode bridges, row spacing 7.62 mm (300 mils), see http://cdn-reichelt.de/documents/datenblatt/A400/HDBL101G_20SERIES-TSC.pdf
+DIL DIP PDIP 5.08mm 7.62mm 300mil
+0
+4
+4
+Diode_THT
+Diode_Bridge_GeneSiC_KBPC_T
+Single phase, Bridge rectifier, 28.55x28.55mm, case KBPC_T(FP), https://www.diodemodule.com/bridge-rectifier/kbpc/kbpc1501t.pdf
+diode module
+0
+4
+4
+Diode_THT
+Diode_Bridge_GeneSiC_KBPC_W
+Single phase, Bridge Rectifier, 28.55x28.55mm, case KBPC_W(WP), https://www.diodemodule.com/bridge-rectifier/kbpc/kbpc15005w.pdf
+diode module
+0
+4
+4
+Diode_THT
+Diode_Bridge_IXYS_GUFP
+Three phase, Bridge, Rectifier
+diode module
+0
+5
+5
+Diode_THT
+Diode_Bridge_Round_D8.9mm
+4-lead round diode bridge package, diameter 8.9mm, pin pitch 5.08mm, see http://cdn-reichelt.de/documents/datenblatt/A400/W005M-W10M_SEP.PDF
+diode bridge 8.9mm 8.85mm WOB pitch 5.08mm
+0
+4
+4
+Diode_THT
+Diode_Bridge_Round_D9.0mm
+4-lead round diode bridge package, diameter 9.0mm, pin pitch 5.0mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40r.pdf
+diode bridge 9.0mm 8.85mm WOB pitch 5.0mm
+0
+4
+4
+Diode_THT
+Diode_Bridge_Round_D9.8mm
+4-lead round diode bridge package, diameter 9.8mm, pin pitch 5.08mm, see http://www.vishay.com/docs/88769/woo5g.pdf
+diode bridge 9.8mm WOG pitch 5.08mm
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_GBL
+Vishay GBL rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88609/gbl005.pdf
+Vishay GBL rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_GBU
+Vishay GBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88606/g3sba20.pdf
+Vishay GBU rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_KBL
+Vishay KBL rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88655/kbl005.pdf
+Vishay KBL rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_KBPC1
+Single phase bridge rectifier case KBPC1, see http://www.vishay.com/docs/93585/vs-kbpc1series.pdf
+Diode Bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_KBPC6
+Single phase bridge rectifier case KBPC6, see http://www.vishay.com/docs/93585/vs-kbpc1series.pdf
+Diode Bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_KBPM
+Vishay KBM rectifier package, 3.95mm pitch (http://www.farnell.com/datasheets/2238158.pdf, http://www.cdil.com/s/kbp2005_.pdf)
+Vishay KBM rectifier diode bridge
+0
+4
+4
+Diode_THT
+Diode_Bridge_Vishay_KBU
+Vishay KBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88656/kbu4.pdf
+Vishay KBU rectifier diode bridge
+0
+4
+4
+Display
+AG12864E
+STN/FSTN LCD 128x64 dot https://www.digchip.com/datasheets/parts/datasheet/1121/AG-12864E-pdf.php
+AG12864E Graphics Display 128x64 Ampire
+0
+24
+20
+Display
+Adafruit_SSD1306
+Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads
+Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI 
+0
+8
+8
+Display
+Adafruit_SSD1306_No_Mounting_Holes
+Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads
+Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI 
+0
+8
+8
+Display
+CR2013-MI2120
+CR2013-MI2120 ILI9341 LCD Breakout http://pan.baidu.com/s/11Y990
+CR2013-MI2120 ILI9341 LCD Breakout
+0
+18
+14
+Display
+EA-eDIP128B-XXX
+LCD-graphical display with LED backlight 128x64 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip128-6e.pdf
+LCD-graphical display with LED backlight 128x64 RS-232 I2C or SPI
+0
+32
+32
+Display
+EA_DOGL128-6
+Graphical,Display,LCD,128x64 https://www.lcd-module.com/eng/pdf/grafik/dogl128-6e.pdf
+EA DOGL128
+0
+26
+26
+Display
+EA_DOGM128-6
+Graphical,Display,LCD,128x64 https://www.lcd-module.de/eng/pdf/grafik/dogm128e.pdf
+EA DOGM128-6
+0
+26
+26
+Display
+EA_DOGS104X-A
+LCD 4x10 character 3.3V VDD I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/doma/dogs104e.pdf
+LCD 4x10 character 3.3V VDD I2C or SPI
+0
+14
+14
+Display
+EA_DOGXL160-7
+Grapchical,Display,LCD,160x104 http://www.lcd-module.com/eng/pdf/grafik/dogxl160-7e.pdf
+EA_DOGXL160-7
+0
+22
+22
+Display
+EA_DOGXL160-7_Backlight
+Grapchical,Display,LCD,160x104 http://www.lcd-module.com/eng/pdf/grafik/dogxl160-7e.pdf
+EA_DOGXL160-7_Backlight
+0
+22
+22
+Display
+EA_T123X-I2C
+http://www.lcd-module.de/pdf/doma/t123-i2c.pdf
+3 Line 12 character wide alpha numeric LCD
+0
+6
+6
+Display
+EA_eDIP160-XXX
+LCD-graphical display with LED backlight 160x104 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip160-7e.pdf
+LCD-graphical display with LED backlight 160x104 RS-232 I2C or SPI
+0
+40
+40
+Display
+EA_eDIP240-XXX
+LCD graphical display LED backlight 240x128 http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip240-7e.pdf
+LCD graphical display LED backlight 240x128
+0
+40
+40
+Display
+EA_eDIP320X-XXX
+LCD display 320x340 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip320-8e.pdf
+LCD display 320x340 RS-232 I2C or SPI
+0
+48
+48
+Display
+EA_eDIPTFT32-XXX
+TFT-graphic display 320x240 16 bit colour with led backlight http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft32-ae.pdf
+TFT-graphic display 320x240 16 bit colour with led backlight
+0
+40
+40
+Display
+EA_eDIPTFT43-ATC
+http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft43-ae.pdf
+TFT graphical display 480x272 16-bit colour with LED backlight
+0
+40
+40
+Display
+EA_eDIPTFT43-XXX
+TFT graphical display 480x272 16-bit colour with LED backlight http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft43-ae.pdf
+TFT graphical display 480x272 16-bit colour with LED backlight
+0
+40
+40
+Display
+EA_eDIPTFT57-XXX
+http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft57-ae.pdf
+TFT-graphic display 640x480 16 bit colour
+0
+48
+48
+Display
+EA_eDIPTFT70-ATC
+TFT-graphical display 800x480 16-bit colours with capacitive touch panel http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf
+TFT-graphical display 800x480 16-bit colours with capacitive touch panel
+0
+48
+48
+Display
+EA_eDIPTFT70-XXX
+TFT-graphical display 800x480 16-bit colours http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf
+TFT-graphical display 800x480 16-bit colours and touch display
+0
+48
+48
+Display
+ER-OLED0.42-1W_Folded
+72x40 white graphic OLED display 0.42 inch, SSD1306B controller, I2C and SPI, folded back https://www.buydisplay.com/download/manual/ER-OLED0.42-1_Datasheet.pdf
+SSD1306 OLED display 0.42 inch
+0
+16
+16
+Display
+ERM19264
+STN/FSTN LCD 192x64 dot https://www.buydisplay.com/download/manual/ERM19264-1_Series_Datasheet.pdf
+ERM19264 Graphics Display 192x64
+0
+20
+20
+Display
+HDSM-441B_HDSM-443B
+2 Digit 7 segemnt blue LED, right hand decimal, https://docs.broadcom.com/docs/AV02-1589EN
+2 Digit 7 segment blue LED
+0
+10
+10
+Display
+HDSM-541B_HDSM-543B
+2 digit 7 segement blue LED with right hand decimal, https://docs.broadcom.com/docs/AV02-1588EN
+2 digit 7 segement blue LED with right hand decimal
+0
+10
+10
+Display
+HDSP-48xx
+10-Element Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Bar Graph Array
+0
+20
+20
+Display
+HDSP-4830
+10-Element Red Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Red Bar Graph Array
+0
+20
+20
+Display
+HDSP-4832
+10-Element Red Yellow Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Red Yellow Green Bar Graph Array
+0
+20
+20
+Display
+HDSP-4836
+10-Element Red Yellow Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Red Yellow Green Bar Graph Array
+0
+20
+20
+Display
+HDSP-4840
+10-Element Yellow Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Yellow Bar Graph Array
+0
+20
+20
+Display
+HDSP-4850
+10-Element Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Green Bar Graph Array
+0
+20
+20
+Display
+HLCP-J100
+10-Element Red Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN
+10-Element Red Bar Graph Array
+0
+20
+20
+Display
+HY1602E
+http://www.icbank.com/data/ICBShop/board/HY1602E.pdf
+LCD 16x2 Alphanumeric 16pin
+0
+20
+16
+Display
+LCD-016N002L
+16 x 2 Character LCD, http://www.vishay.com/product?docid=37299
+LCD-016N002L 16 x 2 Character LCD
+0
+24
+20
+Display
+LM16255
+LCD LM16255 16x2 character http://www.datasheetlib.com/datasheet/259542/lm16255_sharp-electronics.html
+LCD 12x2
+0
+14
+14
+Display
+NHD-0420H1Z
+NHD-0420H1Z LCD http://www.newhavendisplay.com/specs/NHD-0420H1Z-FSW-GBW-33V3.pdf
+NHD-0420H1Z LCD
+0
+16
+16
+Display
+NHD-C0220BiZ
+NHD-C0220BiZ LCD http://www.newhavendisplay.com/specs/NHD-C0220BiZ-FSW-FBW-3V3M.pdf
+NHD-C0220BiZ LCD
+0
+10
+10
+Display
+NHD-C0220BiZ-FSRGB
+NHD-C0220BiZ-FSRGB LCD https://newhavendisplay.com/content/specs/NHD-C0220BiZ-FSRGB-FBW-3VM.pdf
+NHD-C0220BiZ-FSRGB 2 x 20 character LCD RGB backlight
+0
+12
+12
+Display
+NHD-C12832A1Z-FSRGB
+128x32 LCD with RGB backlight https://www.newhavendisplay.com/specs/NHD-C12832A1Z-FSRGB-FBW-3V.pdf
+lcd rgb st7565
+0
+21
+21
+Display
+OLED-128O064D
+128x64 OLED display
+display oled
+0
+30
+30
+Display
+RC1602A
+http://www.raystar-optronics.com/down.php?ProID=18
+LCD 16x2 Alphanumeric 16pin
+0
+22
+18
+Display
+WC1602A
+LCD 16x2 http://www.wincomlcd.com/pdf/WC1602A-SFYLYHTC06.pdf
+LCD 16x2 Alphanumeric 16pin
+0
+20
+16
+Display_7Segment
+7SEGMENT-LED__HDSM531_HDSM533_SMD
+7-Segment Display, HDSM53x, https://docs.broadcom.com/docs/AV02-0713EN
+7segment LED HDSM531 HDSM533
+0
+10
+10
+Display_7Segment
+7SegmentLED_LTS6760_LTS6780
+7-Segment Display, LTS67x0, http://optoelectronics.liteon.com/upload/download/DS30-2001-355/S6760jd.pdf
+7Segment LED LTS6760 LTS6780
+0
+10
+10
+Display_7Segment
+AD-121F2
+Single Digit 7-segment RGB LED Display, 1-inch digit height, common anode, http://usasyck.com/products/AD-121F2_cat_e.pdf
+RGB LED digit
+0
+22
+22
+Display_7Segment
+AFF_2x7SEG-DIGIT_10mm
+Afficheur 7 segments 10mm DIGIT
+AFFICHEUR
+0
+16
+16
+Display_7Segment
+CA56-12CGKWA
+4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12CGKWA(Ver.9A).pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CA56-12EWA
+4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-12EWA.pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CA56-12SEKWA
+4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SEKWA(Ver.7A).pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CA56-12SRWA
+4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-12SRWA.pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CA56-12SURKWA
+4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SURKWA(Ver.8A).pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CA56-12SYKWA
+4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SYKWA(Ver.6A).pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CC56-12GWA
+4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-11GWA.pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+CC56-12YWA
+4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CC56-12YWA.pdf
+4 digit 7 segment green LED
+0
+12
+12
+Display_7Segment
+D1X8K
+https://ia800903.us.archive.org/24/items/CTKD1x8K/Cromatek%20D168K.pdf
+Single digit 7 segment ultra bright red
+0
+10
+10
+Display_7Segment
+DA04-11CGKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11CGKWA(Ver.6A).pdf
+Dubble digit green 7 segment LED display
+0
+16
+16
+Display_7Segment
+DA04-11SEKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SEKWA(Ver.9A).pdf
+Dubble digit super bright orange 7 segment LED display
+0
+16
+16
+Display_7Segment
+DA04-11SURKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SURKWA(Ver.10A).pdf
+Dubble digit hyper red 7 segment LED display
+0
+16
+16
+Display_7Segment
+DA04-11SYKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SYKWA(Ver.6A).pdf
+Dubble digit super bright yellow 7 segment LED display
+0
+16
+16
+Display_7Segment
+DA56-11CGKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11CGKWA(Ver.16A).pdf
+Double digit seven segment green LED display
+0
+18
+18
+Display_7Segment
+DA56-11SEKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SEKWA(Ver.9A).pdf
+Double digit seven segment super bright orange LED display
+0
+18
+18
+Display_7Segment
+DA56-11SURKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SURKWA(Ver.11A).pdf
+Double digit seven segment hyper red LED display
+0
+18
+18
+Display_7Segment
+DA56-11SYKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SYKWA(Ver.11A).pdf
+Double digit seven segment super bright yellow LED display
+0
+18
+18
+Display_7Segment
+DE113-XX-XX
+http://www.display-elektronik.de/filter/DE113-RS-20_635.pdf
+3 1/5 digit LOW BAT + 7-Segment LCD
+0
+40
+40
+Display_7Segment
+DE114-RS-20
+http://www.display-elektronik.de/filter/DE113-RS-20_635.pdf
+3 1/5 digit reflective LCD LOW-BAT + 7-Segment
+0
+40
+40
+Display_7Segment
+DE119-XX-XX
+https://www.display-elektronik.de/filter/DE119-RS-20_635.pdf
+4 digit 7 segment LCD 
+0
+40
+40
+Display_7Segment
+DE122-XX-XX
+http://www.display-elektronik.de/filter/DE122-RS-20_635.pdf
+6 digit 7 segment LCD 
+0
+50
+50
+Display_7Segment
+DE152-XX-XX
+https://tft-module.de/filter/DE152-RS-20_75.pdf
+4 digit 7 segment LCD 
+0
+40
+40
+Display_7Segment
+DE170-XX-XX
+http://www.display-elektronik.de/filter/DE170-RS-20_75.pdf
+3 1/5 digit reflective arrow bat + 7 segment LCD 
+0
+40
+40
+Display_7Segment
+ELD_426XXXX
+http://www.everlight.com/file/ProductFile/D426SYGWA-S530-E2.pdf
+Double digit 7 segment brilliant yellow green LED
+0
+10
+10
+Display_7Segment
+HDSP-7401
+One digit 7 segment yellow, https://docs.broadcom.com/docs/AV02-2553EN
+One digit 7 segment yellow
+0
+10
+10
+Display_7Segment
+HDSP-7507
++-1 overflow 7 segment high efficiency red, https://docs.broadcom.com/docs/AV02-2553EN
++-1 overflow 7 segment high efficiency red
+0
+10
+10
+Display_7Segment
+HDSP-7801
+One digit 7 segment green, https://docs.broadcom.com/docs/AV02-2553EN
+One digit 7 segment green
+0
+10
+10
+Display_7Segment
+HDSP-7807
++-1 overflow 7 segment green, https://docs.broadcom.com/docs/AV02-2553EN
++-1 overflow 7 segment green
+0
+10
+10
+Display_7Segment
+HDSP-A151
+One digit 7 segment red, https://docs.broadcom.com/docs/AV02-2553EN
+One digit 7 segment high efficiency red
+0
+10
+10
+Display_7Segment
+HDSP-A401
+One digit 7 segment orange, common anode, https://docs.broadcom.com/docs/AV02-2553EN
+One digit 7 segment orange common anode
+0
+10
+10
+Display_7Segment
+KCSC02-105
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-105(Ver.9A).pdf
+Single digit 7 segement hyper red LED
+0
+10
+10
+Display_7Segment
+KCSC02-106
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-106(Ver.10A).pdf
+Single digit 7 segement super bright orange LED
+0
+10
+10
+Display_7Segment
+KCSC02-107
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-107(Ver.9A).pdf
+Single digit 7 segement super bright yellow LED
+0
+10
+10
+Display_7Segment
+KCSC02-123
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-123(Ver.10A).pdf
+Single digit 7 segement super bright yellow LED
+0
+10
+10
+Display_7Segment
+KCSC02-136
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-136(Ver.6B).pdf
+Single digit 7 segement super bright yellow LED
+0
+10
+10
+Display_7Segment
+LTC-4627Jx
+http://optoelectronics.liteon.com/upload/download/DS30-2001-393/C4627JG.pdf
+4 digit 7 segment LED
+0
+14
+14
+Display_7Segment
+MAN71A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment red LED with right dot
+0
+14
+14
+Display_7Segment
+MAN72A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment red LED with left dot
+0
+14
+14
+Display_7Segment
+MAN73A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+Overflow +- 1 red LED
+0
+14
+14
+Display_7Segment
+MAN3410A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment green LED with dot
+0
+14
+14
+Display_7Segment
+MAN3420A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment green LED with left dot
+0
+14
+14
+Display_7Segment
+MAN3610A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment orange LED with right dot
+0
+14
+14
+Display_7Segment
+MAN3620A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment orange LED with left dot
+0
+14
+14
+Display_7Segment
+MAN3630A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+Overflow +- 1 orange LED
+0
+14
+14
+Display_7Segment
+MAN3810A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment yellow LED with right dot
+0
+14
+14
+Display_7Segment
+MAN3820A
+https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php
+One digit 7 segment yellow LED with left dot
+0
+14
+14
+Display_7Segment
+SA15-11xxx
+http://www.kingbrightusa.com/images/catalog/SPEC/SA15-11SRWA.pdf
+SA15-11xxx single digit 7 segment display 38.1mm 1.5inch
+0
+10
+10
+Display_7Segment
+SBC18-11SURKCGKWA
+http://www.kingbright.com/attachments/file/psearch/000/00/00/SBC18-11SURKCGKWA(Ver.6A).pdf
+single digit 7 segemnt red/green LED
+0
+10
+10
+Display_7Segment
+Sx39-1xxxxx
+Single digit 7 segment LED display in red, yellow or green colour http://www.kingbrightusa.com/images/catalog/SPEC/sa39-11ewa.pdf
+One digit LED 7 segment SA39-11 SC39-11 SA39-12 SC39-12
+0
+10
+10
+Ferrite_THT
+LairdTech_28C0236-0JW-10
+Ferrite, vertical, LairdTech 28C0236-0JW-10, https://assets.lairdtech.com/home/brandworld/files/28C0236-0JW-10.pdf, JW Miller core https://www.bourns.com/products/magnetic-products/j.w.-miller-through-hole-ferrite-beads-emi-filters
+Ferrite vertical LairdTech 28C0236-0JW-10
+0
+2
+2
+Fiducial
+Fiducial_0.5mm_Mask1.5mm
+Circular Fiducial, 0.5mm bare copper, 1.5mm soldermask opening
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_0.5mm_Mask1mm
+Circular Fiducial, 0.5mm bare copper, 1mm soldermask opening (Level C)
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_0.5mm_Mask2mm
+Circular Fiducial, 0.5mm bare copper, 2mm soldermask opening
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_0.75mm_Mask1.5mm
+Circular Fiducial, 0.75mm bare copper, 1.5mm soldermask opening (Level B)
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_0.75mm_Mask2.25mm
+Circular Fiducial, 0.75mm bare copper, 2.25mm soldermask opening
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_1.5mm_Mask3mm
+Circular Fiducial, 1.5mm bare copper, 3mm soldermask opening
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_1.5mm_Mask4.5mm
+Circular Fiducial, 1.5mm bare copper, 4.5mm soldermask opening
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_1mm_Mask2mm
+Circular Fiducial, 1mm bare copper, 2mm soldermask opening (Level A)
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_1mm_Mask3mm
+Circular Fiducial, 1mm bare copper, 3mm soldermask opening (recommended)
+fiducial
+0
+1
+0
+Fiducial
+Fiducial_Cross_0.5mm_Mask2mm
+Circular Fiducial, Cross variant, 0.5mm bare copper, 2mm soldermask opening
+fiducial
+0
+1
+0
+Filter
+Filter_1109-5_1.1x0.9mm
+5-pin SAW filter package - 1.1x0.9 mm Body; (see https://www.murata.com/~/media/webrenewal/support/library/catalog/products/filter/rf/p73e.ashx?la=en-gb)
+Filter 5
+0
+5
+5
+Filter
+Filter_1411-5_1.4x1.1mm
+5-pin filter package - 1.4x1.1 mm Body; (see https://global.kyocera.com/prdct/electro/product/pdf/sf14_tdlte.pdf)
+Filter 5
+0
+5
+5
+Filter
+Filter_Bourns_SRF0905_6.0x9.2mm
+https://www.bourns.com/docs/Product-Datasheets/SRF0905.pdf
+Line Filter
+0
+4
+4
+Filter
+Filter_FILTERCON_1FPxx
+0.5A, 250VAC, 50/60Hz line filter (https://filtercon.com.pl/wp-content/uploads/2019/07/Karta-katalogowa-FP-12-1.pdf)
+EMI filter
+0
+4
+4
+Filter
+Filter_KEMET_PZB300_24.0x12.5mm_P10.0mm
+EMI suppression capacitor PZB300 series, length 24.0 mm, width 12.5 mm, drill hole 1.00mm ( https://content.kemet.com/datasheets/KEM_F3019_PZB300X2_2XY2_275.pdf )
+suppressor filter cap
+0
+3
+3
+Filter
+Filter_Mini-Circuits_FV1206
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206.pdf
+Mini-Circuits Filter SMD 1206
+0
+6
+4
+Filter
+Filter_Mini-Circuits_FV1206-1
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-1.pdf
+Mini-Circuits Filter SMD 1206
+0
+6
+6
+Filter
+Filter_Mini-Circuits_FV1206-4
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-4.pdf
+Mini-Circuits Filter SMD 1206
+0
+8
+4
+Filter
+Filter_Mini-Circuits_FV1206-5
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-5.pdf
+Mini-Circuits Filter SMD 1206
+0
+8
+4
+Filter
+Filter_Mini-Circuits_FV1206-6
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-6.pdf
+Mini-Circuits Filter SMD 1206
+0
+14
+8
+Filter
+Filter_Mini-Circuits_FV1206-7
+Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-7.pdf
+Mini-Circuits Filter SMD 1206
+0
+5
+3
+Filter
+Filter_Murata_BNX025
+https://www.murata.com/en-us/products/productdata/8796778004510/QNFH9101.pdf?1496719830000
+EMI Filter
+0
+6
+4
+Filter
+Filter_Murata_BNX025_ThermalVias
+https://www.murata.com/en-us/products/productdata/8796778004510/QNFH9101.pdf?1496719830000
+EMI Filter
+0
+19
+4
+Filter
+Filter_Murata_SFECF-6
+SMD Type 10.7MHz Ceramic Filter https://www.murata.com/en-us/products/filter/cerafil/sfecf
+10.7MHz smd ceramic
+0
+6
+6
+Filter
+Filter_Murata_SFECF-6_HandSoldering
+SMD Type 10.7MHz Ceramic Filter https://www.murata.com/en-us/products/filter/cerafil/sfecf
+10.7MHz smd ceramic
+0
+6
+6
+Filter
+Filter_SAW-6_3.8x3.8mm
+6-pin 3.8 x 3.8mm SAW filter package, https://www.golledge.com/media/3785/mp08167.pdf
+SAW filter 6-pin
+0
+6
+6
+Filter
+Filter_SAW-8_3.8x3.8mm
+8-pin 3.8x3.8mm SAW filter, https://www.golledge.com/media/1831/ma05497.pdf
+SAW filter 8-pin
+0
+8
+8
+Filter
+Filter_SAW_Epcos_DCC6C_3x3mm
+EPCOS/TDK Electronics/Qualcomm DCC6c SAW filter package based on EPCOS app note 93 (https://www.catagle.com/45-2/PDF_AN93.htm)
+SAW filter 6-pin
+0
+6
+6
+Filter
+Filter_Schaffner_FN405
+Compact PCB mounting EMI filter (https://www.schaffner.com/product/FN405/Schaffner_datasheet_FN405.pdf)
+EMI filter
+0
+5
+5
+Filter
+Filter_Schaffner_FN406
+Ultra Compact EMC Filter (https://www.schaffner.com/product/FN406/Schaffner_datasheet_FN406.pdf)
+emi filter
+0
+5
+5
+Fuse
+FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165
+Littelfuse fuse holder for ATO/FKS blade fuses, 80V, vertical, 20 x 6mm, PCB thickness up to 1.5mm, http://www.littelfuse.com/~/media/commercial-vehicle/datasheets/automotive-fuse-holders/ato/littelfuse-fuse-holder-ato-flr-pcb-datasheet.pdf
+ATO FKS blade fuse holder
+0
+8
+2
+Fuse
+Fuse_0402_1005Metric
+Fuse SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_0402_1005Metric_Pad0.77x0.64mm_HandSolder
+Fuse SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_0603_1608Metric
+Fuse SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder
+Fuse SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_0805_2012Metric
+Fuse SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder
+Fuse SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_1206_3216Metric
+Fuse SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder
+Fuse SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_1210_3225Metric
+Fuse SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolder
+Fuse SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_1812_4532Metric
+Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder
+Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_2010_5025Metric
+Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_2010_5025Metric_Pad1.52x2.65mm_HandSolder
+Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_2512_6332Metric
+Fuse SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder
+Fuse SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_2920_7451Metric
+Fuse SMD 2920 (7451 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://www.megastar.com/products/fusetronic/polyswitch/PDF/smd2920.pdf), generated with kicad-footprint-generator
+fuse
+0
+2
+2
+Fuse
+Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder
+Fuse SMD 2920 (7451 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: http://www.megastar.com/products/fusetronic/polyswitch/PDF/smd2920.pdf), generated with kicad-footprint-generator
+fuse handsolder
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mm
+Fuse 0ZRE0005FF, BelFuse, Radial Leaded PTC, https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0008FF_L8.3mm_W3.8mm
+Fuse 0ZRE0008FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0012FF_L8.3mm_W3.8mm
+Fuse 0ZRE0012FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0016FF_L9.9mm_W3.8mm
+Fuse 0ZRE0016FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0025FF_L9.6mm_W3.8mm
+Fuse 0ZRE0025FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0033FF_L11.4mm_W3.8mm
+Fuse 0ZRE0033FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0040FF_L11.5mm_W3.8mm
+Fuse 0ZRE0040FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0055FF_L14.0mm_W4.1mm
+Fuse 0ZRE0055FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0075FF_L11.5mm_W4.8mm
+Fuse 0ZRE0075FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0100FF_L18.7mm_W5.1mm
+Fuse 0ZRE0100FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0125FF_L21.2mm_W5.3mm
+Fuse 0ZRE0125FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0150FF_L23.4mm_W5.3mm
+Fuse 0ZRE0150FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_BelFuse_0ZRE0200FF_L24.9mm_W6.1mm
+Fuse 0ZRE0200FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf
+0ZRE BelFuse radial PTC
+0
+2
+2
+Fuse
+Fuse_Blade_ATO_directSolder
+car blade fuse direct solder
+car blade fuse
+0
+2
+2
+Fuse
+Fuse_Blade_Mini_directSolder
+car blade fuse mini, direct solder
+car blade fuse mini
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG300
+PTC Resettable Fuse, Ihold = 3.0A, Itrip=5.1A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG400
+PTC Resettable Fuse, Ihold = 4.0A, Itrip=6.8A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG500
+PTC Resettable Fuse, Ihold = 5.0A, Itrip=8.5A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG600
+PTC Resettable Fuse, Ihold = 6.0A, Itrip=10.2A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG650
+PTC Resettable Fuse, Ihold = 6.5A, Itrip=11.1A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG700
+PTC Resettable Fuse, Ihold = 7.0A, Itrip=11.9A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG800
+PTC Resettable Fuse, Ihold = 8.0A, Itrip=13.6A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG900
+PTC Resettable Fuse, Ihold = 9.0A, Itrip=15.3A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG1000
+PTC Resettable Fuse, Ihold = 10.0A, Itrip=17.0A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RG1100
+PTC Resettable Fuse, Ihold = 11.0A, Itrip=18.7A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT050
+PTC Resettable Fuse, Ihold = 0.5A, Itrip=0.92A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT070
+PTC Resettable Fuse, Ihold = 0.7A, Itrip=1.4A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT100
+PTC Resettable Fuse, Ihold = 1.0A, Itrip=1.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT200
+PTC Resettable Fuse, Ihold = 2.0A, Itrip=3.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT300
+PTC Resettable Fuse, Ihold = 3.0A, Itrip=6.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT400
+PTC Resettable Fuse, Ihold = 4.0A, Itrip=7.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT500
+PTC Resettable Fuse, Ihold = 5.0A, Itrip=9.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT550
+PTC Resettable Fuse, Ihold = 5.5A, Itrip=10.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT600
+PTC Resettable Fuse, Ihold = 6.0A, Itrip=10.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT650
+PTC Resettable Fuse, Ihold = 6.5A, Itrip=12.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT700
+PTC Resettable Fuse, Ihold = 7.0A, Itrip=13.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT750
+PTC Resettable Fuse, Ihold = 7.5A, Itrip=13.1A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT800
+PTC Resettable Fuse, Ihold = 8.0A, Itrip=15.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT900
+PTC Resettable Fuse, Ihold = 9.0A, Itrip=16.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT1000
+PTC Resettable Fuse, Ihold = 10.0A, Itrip=18.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT1100
+PTC Resettable Fuse, Ihold = 11.0A, Itrip=20.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-RHT1300
+PTC Resettable Fuse, Ihold = 13.0A, Itrip=24.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf
+ptc resettable fuse polyfuse THT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-SM_7.98x5.44mm
+https://www.bourns.com/docs/Product-Datasheets/mfsm.pdf
+bourns ptc resettable fuse polyfuse MF-SM MF-SMHT
+0
+2
+2
+Fuse
+Fuse_Bourns_MF-SM_9.5x6.71mm
+https://www.bourns.com/docs/Product-Datasheets/mfsm.pdf
+bourns ptc resettable fuse polyfuse MF-SM MF-SMHT
+0
+2
+2
+Fuse
+Fuse_Bourns_TBU-CA
+Bourns TBU-CA Fuse, 2 Pin (https://www.bourns.com/data/global/pdfs/TBU-CA.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Bourns Fuse NoLead
+0
+3
+3
+Fuse
+Fuse_Littelfuse-LVR100
+Littelfuse, resettable fuse, PTC, polyswitch LVR100, Ih 1A http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf
+LVR100 PTC resettable polyswitch 
+0
+2
+2
+Fuse
+Fuse_Littelfuse-LVR125
+Littelfuse, resettable fuse, PTC, polyswitch LVR125, Ih 1.25A, http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf
+LVR125 PTC resettable polyswitch 
+0
+2
+2
+Fuse
+Fuse_Littelfuse-LVR200
+Littelfuse, resettable fuse, PTC, polyswitch LVR200, Ih 2A, http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf
+LVR200 PTC resettable polyswitch 
+0
+2
+2
+Fuse
+Fuse_Littelfuse-NANO2-451_453
+Littelfuse NANO2 https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_451_453_datasheet.pdf.pdf
+Fuse Nano2
+0
+2
+2
+Fuse
+Fuse_Littelfuse-NANO2-462
+Littelfuse NANO2, 250VAC/VDC, 350VAC/VDC, 10.5 x 4.5 x 4.5mm, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=6201db33-6e55-43f2-b41f-15e38bdd2c99&filename=littelfuse-fuse-462-datasheet
+Fuse Nano2 462
+0
+2
+2
+Fuse
+Fuse_Littelfuse-NANO2-885
+Littelfuse NANO2, 350VAC, 450/500VDC, 10.86 x 4.78 x 4.78mm, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=888f12ed-ed3b-4b45-b910-06af8854ad76&filename=littelfuse-fuse-885-datasheet
+Fuse Nano2 885
+0
+2
+2
+Fuse
+Fuse_Littelfuse_372_D8.50mm
+Fuse, Littelfuse, 372, 8.5x8mm, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_372_datasheet.pdf.pdf
+fuse tht radial
+0
+2
+2
+Fuse
+Fuse_Littelfuse_395Series
+Fuse, TE5, Littelfuse/Wickmann, No. 460, No560,
+Fuse TE5 Littelfuse/Wickmann No. 460 No560 
+0
+2
+2
+Fuse
+Fuse_Schurter_UMT250
+Surface Mount Fuse, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMT_250.pdf)
+Schurter fuse smd
+0
+2
+2
+Fuse
+Fuse_Schurter_UMZ250
+Surface Mount Fuse with Clip, 4.2 x 11.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMZ_250.pdf)
+fuse smd mount holder
+0
+2
+2
+Fuse
+Fuse_SunFuse-6HP
+SunFuse Ceramic Slow Blow Fuse 6H_6HP.PDF
+UL/CSA 6x32mm Ceramic Slow Blow Fuse
+0
+2
+2
+Fuse
+Fuseholder_Blade_ATO_Littelfuse_Pudenz_2_Pin
+Fuseholder ATO Blade littelfuse Pudenz 2 Pin
+Fuseholder ATO Blade littelfuse Pudenz 2 Pin
+0
+2
+2
+Fuse
+Fuseholder_Blade_Mini_Keystone_3568
+fuse holder, car blade fuse mini, http://www.keyelco.com/product-pdf.cfm?p=306
+car blade fuse mini
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Lateral, Horizontal, Bel FC-203-22, https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0672-fuse-clips-series.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Eaton_1A5601-01_Inline_P20.80x6.76mm_D1.70mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Eaton 1A5601-01, https://www.eaton.com/content/dam/eaton/products/electronic-components/resources/data-sheet/eaton-1axxxx-pcb-fuse-clips-atc-atm-blade-data-sheet.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Keystone_3512P_Inline_P23.62x7.27mm_D1.02x2.41x1.02x1.57mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3512P, http://www.keyelco.com/product-pdf.cfm?p=1386
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Keystone_3512_Inline_P23.62x7.27mm_D1.02x1.57mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3512, http://www.keyelco.com/product-pdf.cfm?p=356
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3517, http://www.keyelco.com/product-pdf.cfm?p=354
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Keystone_3518P_Inline_P23.11x6.76mm_D2.44x1.70mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3518P, http://www.keyelco.com/product-pdf.cfm?p=1387
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_100_Inline_P20.50x4.60mm_D1.30mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 100, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 111, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_519_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_111_Lateral_P18.80x5.00mm_D1.17mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 111 (501 and 506), https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 445/030, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_519_Inline_P20.60x5.00mm_D1.00mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 519, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_519_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_520_Inline_P20.50x5.80mm_D1.30mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 520, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Littelfuse_521_Lateral_P17.00x5.00mm_D1.30mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 521, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_520_521_102071_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Schurter_CQM_Inline_P20.60x5.00mm_D1.00mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Schurter CQM (0752), https://www.schurter.com/en/datasheet/typ_CQM.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-5x20mm_Schurter_OG_Lateral_P15.00x5.00mm_D1.3mm_Horizontal
+Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Schurter OG, https://ch.schurter.com/en/datasheet/typ_OG__Clip__5x20.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-6.3x32mm_Littelfuse_102_122_Inline_P34.21x7.62mm_D1.98mm_Horizontal
+Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102/122 Straight Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-6.3x32mm_Littelfuse_102_Inline_P34.21x7.62mm_D2.54mm_Horizontal
+Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102 Bowed Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-6.3x32mm_Littelfuse_122_Inline_P34.21x7.62mm_D2.54mm_Horizontal
+Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 122 Bowed Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Clip-6.3x32mm_Littelfuse_102071_Inline_P34.70x7.60mm_D2.00mm_Horizontal
+Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102071, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_520_521_102071_datasheet.pdf.pdf
+fuse clip open
+0
+4
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Bulgin_FX0456_Vertical_Closed
+Fuseholder, 5x20, closed, vertical, Bulgin, FX0456, https://www.bulgin.com/products/pub/media/bulgin/data/Fuseholders.pdf
+Fuseholder 5x20 closed vertical Bulgin FX0456 Sicherungshalter 
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Bulgin_FX0457_Horizontal_Closed
+Fuseholder, 5x20, closed, horizontal, Bulgin, FX0457, Sicherungshalter,
+Fuseholder 5x20 closed horizontal Bulgin FX0457 Sicherungshalter 
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_EATON_H15-V-1_Vertical_Closed
+PCB fuse holders for 5 mm x 20 mm fuses; 250V; 10A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/bus-elx-ds-4426-h15.pdf)
+fuse holder vertical 5x20mm
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_EATON_HBV_Vertical_Closed
+5 mm x 20 mm fuse holders; Vertical w/ Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf)
+fuse holder vertical 5x20mm
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_EATON_HBW_Vertical_Closed
+5 mm x 20 mm fuse holders; Vertical w/o Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf)
+fuse holder vertical 5x20mm
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open
+Fuseholder horizontal open, 5x20mm, 500V, 16A, Schurter 0031.8201, https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_OGN.pdf
+Fuseholder horizontal open 5x20 Schurter 0031.8201
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Schurter_FAB_0031-355x_Horizontal_Closed
+Fuseholder 5x20mm horizontal Shurter model FAB, Suitable for order numbers 0031.3551 and 0031.3558  (https://www.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FAB.pdf)
+Fuseholder 5x20mm closed horizontal
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Schurter_FPG4_Vertical_Closed
+Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap/Fingergrip, vertical, IEC 60335-1; 250VAC/10A VDE; 500V/16A UL/CSA (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FPG4.pdf)
+fuse holder vertical 5x20mm
+0
+4
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Schurter_FUP_0031.2510_Horizontal_Closed
+Shock-Safe closed Fuseholder, Schurter FUP Series, 5.0 x 20mm, Slotted Cap, horizontal, 500 VAC 4W/16A (VDE), 600V 30A (UL/CSA), order numbers: 0031.2510 (0031.2500 + 0031.2323), http://www.schurter.ch/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FUP.pdf
+Fuseholder 5x20mm horizontal closed
+0
+3
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Schurter_OGN-SMD_Horizontal_Open
+Fuseholder horizontal open, 5x20mm, 500V, 16A (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_OGN-SMD.pdf)
+Fuseholder horizontal open 5x20 Schurter 0031.8221
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open
+https://www.tme.eu/en/Document/3b48dbe2b9714a62652c97b08fcd464b/PTF78.pdf
+Fuseholder horizontal open 5x20 Stelvio-Kontek PTF/78
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-5x20mm_Wuerth_696103101002-SMD_Horizontal_Open
+Fuseholder horizontal open 5x20mm 250V 10A Würth 696103101002
+Fuseholder horizontal open 5x20mm 250V 10A
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-6.3x32mm_Schurter_0031-8002_Horizontal_Open
+Fuseholder, horizontal, open, 6.3x32, Schurter, 0031.8002, https://www.schurter.com/en/datasheet/typ_OG__Holder__6.3x32.pdf
+Fuseholder horizontal open 6.3x32 Schurter 0031.8002
+0
+2
+2
+Fuse
+Fuseholder_Cylinder-6.3x32mm_Schurter_FUP_0031.2520_Horizontal_Closed
+Shock-Safe closed Fuseholder, Schurter FUP Series, 6.3 x 32 mm, Slotted Cap, horizontal, 500 VAC 4W/16A (VDE), 600V 30A (UL/CSA), order numbers: 0031.2520 (0031.2500 + 0031.2321), http://www.schurter.ch/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FUP.pdf
+Fuseholder 6.3x32mm horizontal closed
+0
+3
+2
+Fuse
+Fuseholder_Keystone_3555-2
+Maxi APX ATX Automotive Blade Fuse Clip Holder https://www.keyelco.com/userAssets/file/M65p40.pdf
+Maxi APX ATX Automotive Blade Fuse Clip Holder
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_100_series_5x20mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_100_series_5x25mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_100_series_5x30mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_445_030_series_5x20mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_445_030_series_5x25mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_445_030_series_5x30mm
+Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf
+Fuseholder clips
+0
+4
+2
+Fuse
+Fuseholder_Littelfuse_Nano2_154x
+Littelfuse NANO2 holder, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_154_154t_154l_154tl_datasheet.pdf.pdf
+SMD Nano2 holder
+0
+2
+2
+Fuse
+Fuseholder_Littelfuse_Nano2_157x
+Littelfuse NANO2 holder, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_157_datasheet.pdf.pdf
+SMD Nano2 holder
+0
+2
+2
+Fuse
+Fuseholder_TR5_Littelfuse_No560_No460
+Fuse, Fuseholder, TR5, Littelfuse/Wickmann, No. 460, No560, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_holders/littelfuse_fuse_holder_559_560_datasheet.pdf.pdf
+Fuse Fuseholder TR5 Littelfuse/Wickmann No. 460 No560 
+0
+2
+2
+Heatsink
+Heatsink_35x26mm_1xFixation3mm_Fischer-SK486-35
+Heatsink, 35mm x 26mm, 1x Fixation 3mm, Fischer SK486-35
+heatsink
+0
+1
+1
+Heatsink
+Heatsink_38x38mm_SpringFixation
+Heatsink, 38x38mm, Spring Fixation, diagonal,
+heatsink
+0
+4
+1
+Heatsink
+Heatsink_62x40mm_2xFixation3mm
+Heatsink, 62 x 40mm, 2x 3mm Drills,
+heatsink
+0
+2
+1
+Heatsink
+Heatsink_125x35x50mm_3xFixationM3
+Heatsink, 125x35x50mm, 3 fixation holes 3.2mm
+heatsink
+0
+0
+0
+Heatsink
+Heatsink_AAVID_573300D00010G_TO-263
+Heatsink, 12.70mm x 26.16mm x 10.16, SMD, 18K/W, TO-263, D2 Pak, https://www.shopaavid.com/Product/573300D00000G
+Heatsink AAVID TO-263 D2 Pak
+0
+2
+1
+Heatsink
+Heatsink_AAVID_576802B03900G
+Heatsink, 14.48x12.7x19.05mm, TO-220/ TO-262, https://www.boydcorp.com/aavid-datasheets/Board-Level-Cooling-Plug-In-5768.pdf
+heatsink
+0
+1
+1
+Heatsink
+Heatsink_AAVID_590302B03600G
+Heatsink, 25.4x25.4x42.54mm, TO-220, https://www.boydcorp.com/aavid-datasheets/Board-Level-Cooling-Channel-5903.pdf
+heatsink
+0
+2
+2
+Heatsink
+Heatsink_AAVID_TV5G_TO220_Horizontal
+Heatsink TV5G TO-220 Horizontal, https://www.shopaavid.com/Product/TV-5G
+Heatsink TV5G TO-220 Horizontal 
+0
+0
+0
+Heatsink
+Heatsink_Fischer_FK224xx2201_25x8.3mm
+25x8.3mm Heatsink, 18K/W, TO-220, https://www.fischerelektronik.de/web_fischer/en_GB/$catalogue/fischerData/PR/FK224_220_1_/datasheet.xhtml?branch=heatsinks
+heatsink TO-220
+0
+2
+1
+Heatsink
+Heatsink_Fischer_FK24413D2PAK_26x13mm
+26x13 mm SMD heatsink for TO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d2_pak.pdf
+heatsink TO-252 TO-263 TO-268
+0
+2
+1
+Heatsink
+Heatsink_Fischer_FK24413DPAK_23x13mm
+23x13 mm SMD heatsink for TO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d_pak.pdf
+heatsink TO-252 TO-263 TO-268
+0
+2
+1
+Heatsink
+Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm
+Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC,
+Heatsink fischer TO-220
+0
+2
+1
+Heatsink
+Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3
+Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC,
+Heatsink fischer TO-220
+0
+2
+1
+Heatsink
+Heatsink_Fischer_SK129-STS_42x25mm_2xDrill2.5mm
+Heatsink, Fischer SK129
+heatsink fischer
+0
+2
+1
+Heatsink
+Heatsink_SheetType_50x7mm_2Fixations
+Heatsink, Sheet type, 50x7mm, 2 fixations (solder),
+Heatsink sheet
+0
+2
+1
+Heatsink
+Heatsink_Stonecold_HS-130_30x12mm_2xFixation2.5mm
+Heatsink, StoneCold HS, https://www.tme.eu/Document/da20d9b42617e16f6777c881dc9e3434/hs-130.pdf
+heatsink
+0
+2
+1
+Heatsink
+Heatsink_Stonecold_HS-132_32x14mm_2xFixation1.5mm
+Heatsink, StoneCold HS
+heatsink
+0
+2
+1
+Heatsink
+Heatsink_Stonecold_HS-S01_13.21x6.35mm
+Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf
+heatsink
+0
+0
+0
+Heatsink
+Heatsink_Stonecold_HS-S02_13.21x9.53mm
+Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf
+heatsink
+0
+0
+0
+Heatsink
+Heatsink_Stonecold_HS-S03_13.21x12.7mm
+Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf
+heatsink
+0
+0
+0
+Inductor_SMD
+L_6.3x6.3_H3
+Choke, SMD, 6.3x6.3mm 3mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_7.3x7.3_H3.5
+Choke, SMD, 7.3x7.3mm 3.5mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_7.3x7.3_H4.5
+Choke, SMD, 7.3x7.3mm 4.5mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_10.4x10.4_H4.8
+Choke, SMD, 10.4x10.4mm 4.8mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_12x12mm_H4.5mm
+Choke, SMD, 12x12mm 4.5mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_12x12mm_H6mm
+Choke, SMD, 12x12mm 6mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_12x12mm_H8mm
+Choke, SMD, 12x12mm 8mm height
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_0201_0603Metric
+Inductor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+inductor
+0
+4
+2
+Inductor_SMD
+L_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+Inductor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+4
+2
+Inductor_SMD
+L_0402_1005Metric
+Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_0402_1005Metric_Pad0.77x0.64mm_HandSolder
+Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_0603_1608Metric
+Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_0603_1608Metric_Pad1.05x0.95mm_HandSolder
+Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_0805_2012Metric
+Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_0805_2012Metric_Pad1.05x1.20mm_HandSolder
+Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_0805_2012Metric_Pad1.15x1.40mm_HandSolder
+Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_01005_0402Metric
+Inductor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+inductor
+0
+4
+2
+Inductor_SMD
+L_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+Inductor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+4
+2
+Inductor_SMD
+L_1008_2520Metric
+Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_1008_2520Metric_Pad1.43x2.20mm_HandSolder
+Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_1206_3216Metric
+Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_1206_3216Metric_Pad1.22x1.90mm_HandSolder
+Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_1206_3216Metric_Pad1.42x1.75mm_HandSolder
+Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_1210_3225Metric
+Inductor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_1210_3225Metric_Pad1.42x2.65mm_HandSolder
+Inductor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_1806_4516Metric
+Inductor SMD 1806 (4516 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_1806_4516Metric_Pad1.45x1.90mm_HandSolder
+Inductor SMD 1806 (4516 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_1812_4532Metric
+Inductor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_1812_4532Metric_Pad1.30x3.40mm_HandSolder
+Inductor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_2010_5025Metric
+Inductor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_2010_5025Metric_Pad1.52x2.65mm_HandSolder
+Inductor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_2512_6332Metric
+Inductor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor
+0
+2
+2
+Inductor_SMD
+L_2512_6332Metric_Pad1.52x3.35mm_HandSolder
+Inductor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+inductor handsolder
+0
+2
+2
+Inductor_SMD
+L_APV_ANR3010
+Inductor, APV, ANR3010, 3.0x3.0x1.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR3012
+Inductor, APV, ANR3012, 3.0x3.0x1.2mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR3015
+Inductor, APV, ANR3015, 3.0x3.0x1.5mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4010
+Inductor, APV, ANR4010, 4.0x4.0x1.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4012
+Inductor, APV, ANR4012, 4.0x4.0x1.2mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4018
+Inductor, APV, ANR4018, 4.0x4.0x1.8mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4020
+Inductor, APV, ANR4020, 4.0x4.0x2.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4026
+Inductor, APV, ANR4026, 4.0x4.0x2.6mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR4030
+Inductor, APV, ANR4030, 4.0x4.0x3.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR5012
+Inductor, APV, ANR5012, 5.0x5.0x1.2mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR5020
+Inductor, APV, ANR5020, 5.0x5.0x2.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR5040
+Inductor, APV, ANR5040, 5.0x5.0x4.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR5045
+Inductor, APV, ANR5045, 5.0x5.0x4.5mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR6020
+Inductor, APV, ANR6020, 6.0x6.0x2.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR6028
+Inductor, APV, ANR6028, 6.0x6.0x2.8mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR6045
+Inductor, APV, ANR6045, 6.0x6.0x4.5mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR8040
+Inductor, APV, ANR8040, 8.0x8.0x4.2mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR8065
+Inductor, APV, ANR8065, 8.0x8.0x6.5mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR252010
+Inductor, APV, ANR252010, 2.5x2.0x1.0mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_ANR252012
+Inductor, APV, ANR252012, 2.5x2.0x1.2mm, (http://en.apvind.com/public/upload/20240407/3375c395e460caa8519b4d637d9113ce.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0412
+Inductor, APV, APH0412, 4.2x4.2x1.0mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0420
+Inductor, APV, APH0420, 4.2x4.2x1.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0518
+Inductor, APV, APH0518, 5.2x5.2x1.6mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0530
+Inductor, APV, APH0530, 5.2x5.2x2.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0615
+Inductor, APV, APH0615, 6.8x6.6x1.3mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0618
+Inductor, APV, APH0618, 6.8x6.6x1.6mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0620
+Inductor, APV, APH0620, 6.8x6.6x1.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0624
+Inductor, APV, APH0624, 6.8x6.6x2.2mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0630
+Inductor, APV, APH0630, 6.8x6.6x2.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0640
+Inductor, APV, APH0640, 6.8x6.6x3.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0650
+Inductor, APV, APH0650, 6.8x6.6x4.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0840
+Inductor, APV, APH0840, 8.6x8.0x3.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH0850
+Inductor, APV, APH0850, 8.6x8.0x4.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1030
+Inductor, APV, APH1030, 10.8x10.0x2.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1040
+Inductor, APV, APH1040, 10.8x10.0x3.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1050
+Inductor, APV, APH1050, 10.8x10.0x4.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1240
+Inductor, APV, APH1240, 13.25x12.8x3.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1250
+Inductor, APV, APH1250, 13.25x12.8x4.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1260
+Inductor, APV, APH1260, 13.25x12.8x5.8mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1265
+Inductor, APV, APH1265, 13.25x12.8x6.5mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH1770
+Inductor, APV, APH1770, 17.45x17.15x6.7mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_APV_APH2213
+Inductor, APV, APH2213, 23.3x22.0x12.6mm, (http://en.apvind.com/public/upload/20240408/996aafa961154ed753e4983e7eb80fa7.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor molded power shielded
+0
+2
+2
+Inductor_SMD
+L_AVX_LMLP07A7
+Inductor, AVX Kyocera, LMLP Series, style D, 6.6mmx7.3mm, 3.0mm height. (Script generated with StandardBox.py) (https://datasheets.avx.com/LMLPD.pdf)
+Inductor LMLP
+0
+2
+2
+Inductor_SMD
+L_Abracon_ASPI-0425
+Inductor, Abracon, ASPI-0425, 4.0x4.0x2.5mm, (https://abracon.com/Magnetics/new/ASPI-0425.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded low-profile
+0
+2
+2
+Inductor_SMD
+L_Abracon_ASPI-0630LR
+smd shielded power inductor https://abracon.com/Magnetics/power/ASPI-0630LR.pdf
+inductor abracon smd shielded
+0
+2
+2
+Inductor_SMD
+L_Abracon_ASPI-3012S
+smd shielded power inductor http://www.abracon.com/Magnetics/power/ASPI-3012S.pdf
+inductor abracon smd shielded
+0
+2
+2
+Inductor_SMD
+L_Abracon_ASPI-4030S
+smd shielded power inductor 4x4x3mm, Abracon ASPI-4030S, https://abracon.com/Magnetics/power/ASPI-4030S.pdf
+inductor abracon smd shielded
+0
+2
+2
+Inductor_SMD
+L_Abracon_ASPIAIG-F4020
+Inductor, Abracon, ASPIAIG-F4020, 4.4x4.4x1.9mm, (https://abracon.com/Magnetics/power/ASPIAIG-F4020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRN1060
+Bourns SRN1060 series SMD inductor https://www.bourns.com/docs/Product-Datasheets/SRN1060.pdf
+Bourns SRN1060 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRN4018
+Bourns SRN4018 series SMD inductor, https://www.bourns.com/docs/Product-Datasheets/SRN4018.pdf
+Bourns SRN4018 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRN6028
+Bourns SRN6028 series SMD inductor
+Bourns SRN6028 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRN8040_8x8.15mm
+Bourns SRN8040 series SMD inductor 8x8.15mm, https://www.bourns.com/docs/Product-Datasheets/SRN8040.pdf
+Bourns SRN8040 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRR1005
+Bourns SRR1005 series SMD inductor
+Bourns SRR1005 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRU1028_10.0x10.0mm
+Bourns SRU1028 series SMD inductor, https://www.bourns.com/docs/Product-Datasheets/SRU1028.pdf
+Bourns SRU1028 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRU8028_8.0x8.0mm
+Bourns SRU8028 series SMD inductor
+Bourns SRU8028 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns-SRU8043
+Bourns SRU8043 series SMD inductor
+Bourns SRU8043 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SDR0604
+SMD Power Inductor, https://www.bourns.com/pdfs/SDR0604.pdf
+SMD Power Inductor SDR0604
+0
+2
+2
+Inductor_SMD
+L_Bourns_SDR1806
+https://www.bourns.com/docs/Product-Datasheets/SDR1806.pdf
+Bourns SDR1806
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRF1260
+Inductor, Bourns, SRF1260, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://www.bourns.com/docs/Product-Datasheets/SRF1260.pdf)
+Inductor Bourns_SRF1260
+0
+4
+4
+Inductor_SMD
+L_Bourns_SRN6045TA
+http://www.bourns.com/docs/product-datasheets/srn6045ta.pdf
+Semi-shielded Power Inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRN8040TA
+https://www.bourns.com/docs/product-datasheets/srn8040ta.pdf
+Inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP1038C_10.0x10.0mm
+Bourns SRP1038C series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRP1038C.pdf
+Bourns SRP1038C SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP1050WA
+Inductor, Bourns, SRP1050WA, 11.0x10.0x5.1mm, (https://www.bourns.com/docs/product-datasheets/SRP1050WA.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP1245A
+Bourns SRP1245A series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRP1245A.pdf
+Bourns SRP1245A SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP1770TA_16.9x16.9mm
+Bourns SRP1770TA series SMD Inductor http://www.bourns.com/docs/Product-Datasheets/SRP1770TA.pdf
+Bourns SRP1770TA series SMD Inductor 
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP2313AA
+Bourns SRR1260 series SMD inductor http://www.bourns.com/docs/product-datasheets/srp2313aa.pdf
+Bourns SRR1260 SMD inductor
+0
+4
+2
+Inductor_SMD
+L_Bourns_SRP5030T
+Inductor, Bourns, SRP5030T, 5.7x5.2x2.8mm, (https://www.bourns.com/data/global/pdfs/SRP5030T.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP6060FA
+Inductor, Bourns, SRP6060FA, 6.4x6.6x5.8mm, (https://www.bourns.com/docs/Product-Datasheets/SRP6060FA.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRP7028A_7.3x6.6mm
+Shielded Power Inductors (https://www.bourns.com/docs/product-datasheets/srp7028a.pdf)
+Shielded Inductors Bourns SMD SRP7028A
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRR1208_12.7x12.7mm
+Bourns SRP1208 series SMD inductor https://www.bourns.com/pdfs/SRR1208.pdf
+Bourns SRP1208 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRR1210A
+Bourns SRR1210A series SMD inductor https://www.bourns.com/docs/Product-Datasheets/SRR1210A.pdf
+Bourns SRR1210A SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRR1260
+Bourns SRR1260 series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRR1260.pdf
+Bourns SRR1260 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Bourns_SRU5016_5.2x5.2mm
+Bourns SRU5016 series shielded SMD power inductor, 1.6mm height https://www.bourns.com/docs/product-datasheets/sru5016.pdf
+Bourns SRU5016 SMD inductor
+0
+4
+3
+Inductor_SMD
+L_Cenker_CKCS3012
+Inductor, Cenker, CKCS3012, 3.0x3.0x1.3mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS3015
+Inductor, Cenker, CKCS3015, 3.0x3.0x1.7mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS4018
+Inductor, Cenker, CKCS4018, 4.0x4.0x1.8mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS4020
+Inductor, Cenker, CKCS4020, 4.0x4.0x2.0mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS4030
+Inductor, Cenker, CKCS4030, 4.0x4.0x3.0mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS5020
+Inductor, Cenker, CKCS5020, 5.0x5.0x2.1mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS5040
+Inductor, Cenker, CKCS5040, 5.0x5.0x4.0mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS6020
+Inductor, Cenker, CKCS6020, 6.0x6.0x2.1mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS6028
+Inductor, Cenker, CKCS6028, 6.0x6.0x3.0mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS6045
+Inductor, Cenker, CKCS6045, 6.0x6.0x4.7mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS8040
+Inductor, Cenker, CKCS8040, 8.0x8.0x4.2mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS8060
+Inductor, Cenker, CKCS8060, 8.0x8.0x6.2mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS8080
+Inductor, Cenker, CKCS8080, 8.0x8.0x8.0mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS201610
+Inductor, Cenker, CKCS201610, 2.0x1.6x1.05mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS252010
+Inductor, Cenker, CKCS252010, 2.5x2.0x1.05mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Cenker_CKCS252012
+Inductor, Cenker, CKCS252012, 2.5x2.0x1.25mm, (https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ckcs
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR3010S
+Inductor, Changjiang, FNR3010S, 3.0x3.0x1.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR3012S
+Inductor, Changjiang, FNR3012S, 3.0x3.0x1.2mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR3015S
+Inductor, Changjiang, FNR3015S, 3.0x3.0x1.5mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR3021S
+Inductor, Changjiang, FNR3021S, 3.0x3.0x2.35mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4010S
+Inductor, Changjiang, FNR4010S, 4.0x4.0x1.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4012S
+Inductor, Changjiang, FNR4012S, 4.0x4.0x1.2mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4015S
+Inductor, Changjiang, FNR4015S, 4.0x4.0x1.65mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4018S
+Inductor, Changjiang, FNR4018S, 4.0x4.0x1.8mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4020S
+Inductor, Changjiang, FNR4020S, 4.0x4.0x2.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4026S
+Inductor, Changjiang, FNR4026S, 4.0x4.0x2.6mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR4030S
+Inductor, Changjiang, FNR4030S, 4.0x4.0x3.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5012S
+Inductor, Changjiang, FNR5012S, 5.0x5.0x1.2mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5015S
+Inductor, Changjiang, FNR5015S, 5.0x5.0x1.5mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5020S
+Inductor, Changjiang, FNR5020S, 5.0x5.0x2.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5030S
+Inductor, Changjiang, FNR5030S, 5.0x5.0x3.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5040S
+Inductor, Changjiang, FNR5040S, 5.0x5.0x4.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR5045S
+Inductor, Changjiang, FNR5045S, 5.0x5.0x4.5mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR6020S
+Inductor, Changjiang, FNR6020S, 6.0x6.0x2.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR6028S
+Inductor, Changjiang, FNR6028S, 6.0x6.0x2.8mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR6040S
+Inductor, Changjiang, FNR6040S, 6.0x6.0x4.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR6045S
+Inductor, Changjiang, FNR6045S, 6.0x6.0x4.5mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR8040S
+Inductor, Changjiang, FNR8040S, 8.0x8.0x4.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR8050S
+Inductor, Changjiang, FNR8050S, 8.0x8.0x5.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR8065S
+Inductor, Changjiang, FNR8065S, 8.0x8.0x6.5mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR252010S
+Inductor, Changjiang, FNR252010S, 2.5x2.0x1.0mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FNR252012S
+Inductor, Changjiang, FNR252012S, 2.5x2.0x1.2mm, (https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor wirewound power shielded
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0412
+Inductor, Changjiang, FXL0412, 3.85x4.2x1.0mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0420
+Inductor, Changjiang, FXL0420, 3.85x4.2x1.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0518
+Inductor, Changjiang, FXL0518, 4.85x5.2x1.6mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0530
+Inductor, Changjiang, FXL0530, 4.85x5.2x2.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0615
+Inductor, Changjiang, FXL0615, 6.45x6.6x1.3mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0618
+Inductor, Changjiang, FXL0618, 6.45x6.6x1.6mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0624
+Inductor, Changjiang, FXL0624, 6.45x6.6x2.2mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0630
+Inductor, Changjiang, FXL0630, 6.45x6.6x2.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0640
+Inductor, Changjiang, FXL0640, 6.45x6.6x3.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0650
+Inductor, Changjiang, FXL0650, 6.45x6.6x4.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL0840
+Inductor, Changjiang, FXL0840, 8.25x8.2x3.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1030
+Inductor, Changjiang, FXL1030, 10.95x10.0x2.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1040
+Inductor, Changjiang, FXL1040, 10.95x10.0x3.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1050
+Inductor, Changjiang, FXL1050, 10.95x10.0x4.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1340
+Inductor, Changjiang, FXL1340, 12.9x12.8x4.0mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1350
+Inductor, Changjiang, FXL1350, 12.9x12.6x4.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1360
+Inductor, Changjiang, FXL1360, 12.9x12.6x5.8mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1365
+Inductor, Changjiang, FXL1365, 12.9x12.6x6.5mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL1770
+Inductor, Changjiang, FXL1770, 16.6x17.15x7.0mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Changjiang_FXL2213
+Inductor, Changjiang, FXL2213, 22.95x22.0x12.6mm, (https://www.lcsc.com/datasheet/lcsc_datasheet_2404260921_cjiang--Changjiang-Microelectronics-Tech-FXL0420-2R2-M_C167206.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor power shielded cjiang fxl
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRA00040415
+Inductor, Chilisin, BMRA00040415, 4.6x4.1x1.5mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRA00040420
+Inductor, Chilisin, BMRA00040420, 4.6x4.1x2.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRA00050520
+Inductor, Chilisin, BMRA00050520, 5.7x5.4x1.8mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRA00050530
+Inductor, Chilisin, BMRA00050530, 5.7x5.4x3.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00050512
+Inductor, Chilisin, BMRB00050512, 5.7x5.4x1.2mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00050518
+Inductor, Chilisin, BMRB00050518, 5.7x5.4x1.8mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00050518-B
+Inductor, Chilisin, BMRB00050518-B, 5.4x5.2x1.6mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00060612
+Inductor, Chilisin, BMRB00060612, 7.3x6.6x1.2mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00060618
+Inductor, Chilisin, BMRB00060618, 7.3x6.6x1.6mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00060624
+Inductor, Chilisin, BMRB00060624, 7.3x6.6x2.4mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRB00060650
+Inductor, Chilisin, BMRB00060650, 7.3x6.6x5.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRF00101040
+Inductor, Chilisin, BMRF00101040, 11.6x10.1x4.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRF00131350
+Inductor, Chilisin, BMRF00131350, 13.8x12.6x5.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRF00131360
+Inductor, Chilisin, BMRF00131360, 13.8x12.6x5.8mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRF00171770
+Inductor, Chilisin, BMRF00171770, 17.15x17.15x6.8mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRG00101030
+Inductor, Chilisin, BMRG00101030, 11.6x10.1x3.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRG00131360
+Inductor, Chilisin, BMRG00131360, 13.8x12.6x6.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRx00040412
+Inductor, Chilisin, BMRx00040412, 4.6x4.1x1.2mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRx00050512-B
+Inductor, Chilisin, BMRx00050512-B, 5.4x5.2x1.2mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRx00050515
+Inductor, Chilisin, BMRx00050515, 5.7x5.4x1.5mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRx00060615
+Inductor, Chilisin, BMRx00060615, 7.3x6.6x1.3mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Chilisin_BMRx00060630
+Inductor, Chilisin, BMRx00060630, 7.3x6.6x3.0mm, (https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor bmrx mchi
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_1515SQ-47N
+Inductor, Coilcraft, 1515SQ-47N, 4.06x3.56x3.73mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_1515SQ-68N
+Inductor, Coilcraft, 1515SQ-68N, 5.33x3.56x3.73mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_1515SQ-82N
+Inductor, Coilcraft, 1515SQ-82N, 5.84x3.56x3.73mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-90N
+Inductor, Coilcraft, 2222SQ-90N, 5.21x5.46x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-111
+Inductor, Coilcraft, 2222SQ-111, 6.35x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-131
+Inductor, Coilcraft, 2222SQ-131, 6.73x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-161
+Inductor, Coilcraft, 2222SQ-161, 7.37x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-181
+Inductor, Coilcraft, 2222SQ-181, 8.13x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-221
+Inductor, Coilcraft, 2222SQ-221, 9.91x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-271
+Inductor, Coilcraft, 2222SQ-271, 11.68x5.59x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2222SQ-301
+Inductor, Coilcraft, 2222SQ-301, 11.94x5.72x5.69mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2929SQ-331
+Inductor, Coilcraft, 2929SQ-331, 10.29x7.49x7.24mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2929SQ-361
+Inductor, Coilcraft, 2929SQ-361, 11.3x7.49x7.24mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2929SQ-391
+Inductor, Coilcraft, 2929SQ-391, 12.32x7.49x7.24mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2929SQ-431
+Inductor, Coilcraft, 2929SQ-431, 13.21x7.49x7.24mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_2929SQ-501
+Inductor, Coilcraft, 2929SQ-501, 14.0x7.49x7.24mm, (https://www.coilcraft.com/getmedia/a4eed406-a97e-4630-9d8e-771bb470867f/1515sq.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sq
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_LPS3010
+Shielded Power Inductor SMD 3x3x1mm, Coilcraft LPS3010, https://www.coilcraft.com/pdfs/lps3010.pdf
+inductor low profile
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_LPS3314
+SMD Inductor, 3.3x3.3x1.4mm, Coilcraft LPS3314, https://www.coilcraft.com/pdfs/lps3314.pdf
+L Coilcraft LPS3314
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_LPS4018
+SMD Inductor Coilcraft LPS4018 https://www.coilcraft.com/pdfs/lps4018.pdf
+L Coilcraft LPS4018
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_LPS4414
+SMD Inductor Coilcraft LPS4414, https://www.coilcraft.com/getmedia/fa8805ca-b278-4819-915a-b5cf632f0239/lps4414.pdf
+L Coilcraft LPS4414
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_LPS5030
+Shielded Power Inductor SMD, Coilcraft LPS5030, https://www.coilcraft.com/pdfs/lps5030.pdf, StepUp generated footprint
+inductor
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MOS6020-XXX
+Inductor, Coilcraft, MOS6020-XXX, 6.8x6.0x2.4mm, (https://www.coilcraft.com/getmedia/c3eb212d-a1a9-4db6-9f14-a01f21fd984c/mos6020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1038-XXX
+Inductor, Coilcraft, MSS1038-XXX, 10.2x10.0x3.8mm, (https://www.coilcraft.com/getmedia/3e03a7b4-3b1d-4f31-b1f3-e7c621695ac0/mss1038.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1038T-XXX
+Inductor, Coilcraft, MSS1038T-XXX, 10.2x10.0x3.8mm, (https://www.coilcraft.com/getmedia/ea4800a7-100e-49d9-9bbc-6ba8b238dc0d/mss1038t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1048-XXX
+Inductor, Coilcraft, MSS1048-XXX, 10.2x10.0x4.8mm, (https://www.coilcraft.com/getmedia/bd5140ec-db32-4346-a029-5182269dc08e/mss1048.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1048T-XXX
+Inductor, Coilcraft, MSS1048T-XXX, 10.2x10.0x4.8mm, (https://www.coilcraft.com/getmedia/bd5140ec-db32-4346-a029-5182269dc08e/mss1048t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1210-XXX
+Inductor, Coilcraft, MSS1210-XXX, 12.0x12.0x10.0mm, (https://www.coilcraft.com/getmedia/f1a1bc5f-bdff-42f8-9ca8-1a0fb1d5094f/MSS1210.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1210H-XXX
+Inductor, Coilcraft, MSS1210H-XXX, 12.0x12.0x10.0mm, (https://www.coilcraft.com/getmedia/52078704-21eb-4c2b-9b72-1e07b4a2e252/mss1210h.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1246-XXX
+Inductor, Coilcraft, MSS1246-XXX, 12.0x12.0x4.6mm, (https://www.coilcraft.com/getmedia/960fadbe-0ca0-40e2-ae20-64edb15f3a07/mss1246.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1246H-XXX
+Inductor, Coilcraft, MSS1246H-XXX, 12.0x12.0x4.65mm, (https://www.coilcraft.com/getmedia/25f62276-187e-4c2c-9b9b-4568b9a9a423/mss1246h.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1246T-XXX
+Inductor, Coilcraft, MSS1246T-XXX, 12.0x12.0x4.6mm, (https://www.coilcraft.com/getmedia/dec41de3-f4b7-4c07-b144-cc21921ccfd5/mss1246t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1260-XXX
+Inductor, Coilcraft, MSS1260-XXX, 12.0x12.0x6.0mm, (https://www.coilcraft.com/getmedia/febefb9b-60f9-4a2c-8525-9c396f34e363/mss1260.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1260H-XXX
+Inductor, Coilcraft, MSS1260H-XXX, 12.0x12.0x6.0mm, (https://www.coilcraft.com/getmedia/352767ff-7c30-4312-ab84-989443b4047e/mss1260h.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1260T-XXX
+Inductor, Coilcraft, MSS1260T-XXX, 12.0x12.0x6.0mm, (https://www.coilcraft.com/getmedia/ce88ed45-272e-474e-a25e-981003944639/mss1260t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1278-XXX
+Inductor, Coilcraft, MSS1278-XXX, 12.0x12.0x7.8mm, (https://www.coilcraft.com/getmedia/6eb5ea38-40e4-41a6-9f92-3cdf8e907dcd/mss1278.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1278H-XXX
+Inductor, Coilcraft, MSS1278H-XXX, 12.0x12.0x7.8mm, (https://www.coilcraft.com/getmedia/72ffd561-3941-457d-b0e7-bb55b1b2d1a7/MSS1278H.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1278T-XXX
+Inductor, Coilcraft, MSS1278T-XXX, 12.0x12.0x7.8mm, (https://www.coilcraft.com/getmedia/e8d7b32a-defa-4500-bc0f-6ecc558fcde6/mss1278t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1514V-XXX
+Inductor, Coilcraft, MSS1514V-XXX, 15.0x15.0x8.6mm, (https://www.coilcraft.com/getmedia/a1319e1c-d611-4bc0-be30-c17e52e4e667/mss1514v.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1583-XXX
+Inductor, Coilcraft, MSS1583-XXX, 15.0x15.0x8.6mm, (https://www.coilcraft.com/getmedia/fbfe8ea7-f5d8-4484-859e-2285f427326d/mss1583.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS1812T-XXX
+Inductor, Coilcraft, MSS1812T-XXX, 18.3x18.3x12.0mm, (https://www.coilcraft.com/getmedia/148807de-bc83-43dc-9fce-d4df334864cd/mss1812t.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_MSS7348-XXX
+Inductor, Coilcraft, MSS7348-XXX, 7.0x7.0x4.5mm, (https://www.coilcraft.com/getmedia/018a2bda-2036-409a-8b19-945e531c18b5/MSS7348.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor mss
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1010-XXX
+Inductor, Coilcraft, XAL1010-XXX, 10.5x11.8x10.0mm, (https://www.coilcraft.com/getmedia/dd74e670-e705-456a-9a69-585fe02eaf3c/xal1010.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1030-XXX
+Inductor, Coilcraft, XAL1030-XXX, 10.5x11.8x3.1mm, (https://www.coilcraft.com/getmedia/7b108457-7731-456d-9256-ca72f2e1a551/xal1030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1060-XXX
+Inductor, Coilcraft, XAL1060-XXX, 10.5x11.8x6.0mm, (https://www.coilcraft.com/getmedia/8909f858-b441-4d60-acff-8b8ca36f9ede/xal1060.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1350-XXX
+Inductor, Coilcraft, XAL1350-XXX, 13.2x14.2x5.0mm, (https://www.coilcraft.com/getmedia/dc536f86-3a3b-454f-950e-8e153260e61c/xal1350.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-103
+Inductor, Coilcraft, XAL1510-103, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-153
+Inductor, Coilcraft, XAL1510-153, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-223
+Inductor, Coilcraft, XAL1510-223, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-333
+Inductor, Coilcraft, XAL1510-333, 15.4x16.4x11.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-472
+Inductor, Coilcraft, XAL1510-472, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-682
+Inductor, Coilcraft, XAL1510-682, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1510-822
+Inductor, Coilcraft, XAL1510-822, 15.4x16.4x10.0mm, (https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1513-153
+Inductor, Coilcraft, XAL1513-153, 15.4x16.4x13.0mm, (https://www.coilcraft.com/getmedia/129ad6f3-0445-47fd-a0b3-edeb49177c17/xal1513.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-102
+Inductor, Coilcraft, XAL1580-102, 15.4x16.4x8.2mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-132
+Inductor, Coilcraft, XAL1580-132, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-182
+Inductor, Coilcraft, XAL1580-182, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-202
+Inductor, Coilcraft, XAL1580-202, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-302
+Inductor, Coilcraft, XAL1580-302, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-401
+Inductor, Coilcraft, XAL1580-401, 15.4x16.4x8.2mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-452
+Inductor, Coilcraft, XAL1580-452, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-532
+Inductor, Coilcraft, XAL1580-532, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-612
+Inductor, Coilcraft, XAL1580-612, 15.4x16.4x8.0mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL1580-741
+Inductor, Coilcraft, XAL1580-741, 15.4x16.4x8.2mm, (https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL4020-XXX
+Inductor, Coilcraft, XAL4020-XXX, 4.3x4.3x2.1mm, (https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL4030-XXX
+Inductor, Coilcraft, XAL4030-XXX, 4.3x4.3x3.1mm, (https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL4040-XXX
+Inductor, Coilcraft, XAL4040-XXX, 4.3x4.3x4.1mm, (https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL5020-XXX
+Inductor, Coilcraft, XAL5020-XXX, 5.48x5.68x2.0mm, (https://www.coilcraft.com/getmedia/1941eff1-c018-493c-8cd6-d88d2edf5029/xal5020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL5030-XXX
+Inductor, Coilcraft, XAL5030-XXX, 5.48x5.68x3.1mm, (https://www.coilcraft.com/getmedia/49bc46c8-4b2c-45b9-9b6c-2eaa235ea698/xal50xx.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL5050-XXX
+Inductor, Coilcraft, XAL5050-XXX, 5.48x5.68x5.1mm, (https://www.coilcraft.com/getmedia/49bc46c8-4b2c-45b9-9b6c-2eaa235ea698/xal50xx.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL6020-XXX
+Inductor, Coilcraft, XAL6020-XXX, 6.56x6.76x2.1mm, (https://www.coilcraft.com/getmedia/467ff589-8942-4e57-92d0-5bef6e04ce09/xal6020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL6030-XXX
+Inductor, Coilcraft, XAL6030-XXX, 6.56x6.76x3.1mm, (https://www.coilcraft.com/getmedia/ea51f14b-7f32-4dc6-8dfe-d4b70549040f/xal60xx.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL6060-XXX
+Inductor, Coilcraft, XAL6060-XXX, 6.56x6.76x6.1mm, (https://www.coilcraft.com/getmedia/ea51f14b-7f32-4dc6-8dfe-d4b70549040f/xal60xx.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-102
+Inductor, Coilcraft, XAL7020-102, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-122
+Inductor, Coilcraft, XAL7020-122, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-151
+Inductor, Coilcraft, XAL7020-151, 8.0x8.0x2.05mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-152
+Inductor, Coilcraft, XAL7020-152, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-222
+Inductor, Coilcraft, XAL7020-222, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-271
+Inductor, Coilcraft, XAL7020-271, 8.0x8.0x2.05mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-331
+Inductor, Coilcraft, XAL7020-331, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-471
+Inductor, Coilcraft, XAL7020-471, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7020-681
+Inductor, Coilcraft, XAL7020-681, 8.0x8.0x2.0mm, (https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-102
+Inductor, Coilcraft, XAL7030-102, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-103
+Inductor, Coilcraft, XAL7030-103, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-152
+Inductor, Coilcraft, XAL7030-152, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-161
+Inductor, Coilcraft, XAL7030-161, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-222
+Inductor, Coilcraft, XAL7030-222, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-272
+Inductor, Coilcraft, XAL7030-272, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-301
+Inductor, Coilcraft, XAL7030-301, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-332
+Inductor, Coilcraft, XAL7030-332, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-472
+Inductor, Coilcraft, XAL7030-472, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-562
+Inductor, Coilcraft, XAL7030-562, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-601
+Inductor, Coilcraft, XAL7030-601, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-682
+Inductor, Coilcraft, XAL7030-682, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7030-822
+Inductor, Coilcraft, XAL7030-822, 8.0x8.0x3.1mm, (https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7050-XXX
+Inductor, Coilcraft, XAL7050-XXX, 7.7x8.0x5.0mm, (https://www.coilcraft.com/getmedia/13a991b3-4273-4be3-81ba-f3cf372b4691/xal7050.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL7070-XXX
+Inductor, Coilcraft, XAL7070-XXX, 7.7x8.0x7.0mm, (https://www.coilcraft.com/getmedia/1ba55433-bcc8-4838-9b21-382f497e12e0/xal7070.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL8050-223
+Inductor, Coilcraft, XAL8050-223, 8.3x8.8x5.0mm, (https://www.coilcraft.com/getmedia/5885ede8-ea4f-464a-9dcb-18dbf143a845/xal8050.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XAL8080-XXX
+Inductor, Coilcraft, XAL8080-XXX, 8.3x8.8x8.0mm, (https://www.coilcraft.com/getmedia/345e50d6-a804-4ecb-9a92-5185221faf3e/xal8080.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor xal
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XFL2010
+Coilcraft XFL2010, Shielded power inductor, 0808, 1.9x2.0mm, https://www.coilcraft.com/getmedia/50382b97-998f-4b75-b5ee-4a93b0ac4411/xfl2010.pdf
+miniature
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XxL4020
+L_Coilcraft_XxL4020 https://www.coilcraft.com/pdfs/xfl4020.pdf
+L Coilcraft XxL4020
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XxL4030
+L_Coilcraft_XxL4030 https://www.coilcraft.com/pdfs/xfl4030.pdf
+L Coilcraft XxL4030
+0
+2
+2
+Inductor_SMD
+L_Coilcraft_XxL4040
+L_Coilcraft_XxL4040 https://www.coilcraft.com/pdfs/xal4000.pdf
+L Coilcraft XxL4040
+0
+2
+2
+Inductor_SMD
+L_CommonModeChoke_Coilcraft_0603USB
+Coilcraft 0603USB Series Common Mode Choke, https://www.coilcraft.com/pdfs/0603usb.pdf
+surface mount common mode bead
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_Coilcraft_0805USB
+Coilcraft 0805USB Series Common Mode Choke, https://www.coilcraft.com/pdfs/0805usb.pdf
+surface mount common mode bead
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_Coilcraft_1812CAN
+Coilcraft 1812CAN Series Common Mode Choke, https://www.coilcraft.com/pdfs/1812can.pdf
+surface mount common mode bead
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_Murata_DLW5BTMxxxSQ2x_5x5mm
+Wire Wound Chip Common Mode Choke Coil SMD, Murata DLW5BTxxxSQ2x, https://www.murata.com/products/productdata/8796762701854/EFLC0020.pdf, manual footprint
+inductor common mode choke
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_TDK_ACM2520-2P
+TDK ACM2520 common-mode filter, SMD, 2x2.5mm, height 1.2mm https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_signal_acm2520_en.pdf
+ACM2520 common-mode filter 4 pin
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_TDK_ACM2520-3P
+TDK ACM2520 common-mode filter, SMD, 2x2.5mm, height 1.2mm https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_signal_acm2520_en.pdf
+ACM2520 common-mode filter 6 pin
+0
+6
+6
+Inductor_SMD
+L_CommonModeChoke_TDK_ACM7060
+ACM7060 SMT Common Mode Filter, https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_power_acm7060_en.pdf
+SMT Common Mode Line Filter
+0
+4
+4
+Inductor_SMD
+L_CommonModeChoke_Wuerth_WE-SL5
+WE-SL5 SMT Common Mode Line Filter, 9.5x8.3mm, height 5mm, https://www.we-online.com/components/products/datasheet/744273222.pdf
+SMT Common Mode Line Filter
+0
+4
+4
+Inductor_SMD
+L_CommonMode_Delevan_4222
+API Delevan, Surface Mount Common Mode Bead, 4222 4222R, http://www.delevan.com/seriesPDFs/4222.pdf
+surface mount common mode bead
+0
+4
+4
+Inductor_SMD
+L_CommonMode_Wuerth_WE-SL2
+http://katalog.we-online.de/en/pbs/WE-SL2?sid=5fbec16187#vs_t1:c1_ct:1
+Wuerth WE-SL2
+0
+4
+4
+Inductor_SMD
+L_CommonMode_Wurth_WE-CNSW-1206
+WE-CNSW SMT Common Mode Line Filter, https://www.we-online.com/components/products/datasheet/744232090.pdf
+common mode choke 1206 cnsw
+0
+4
+4
+Inductor_SMD
+L_Eaton_MCL2012V1
+Inductor, Eaton, MCL2012V1, 2.0x1.2x0.9mm, (https://eu.mouser.com/datasheet/2/87/eaton-mcl2012v1-multilayer-chip-inductor-data-shee-1622891.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ferrite multilayer power
+0
+2
+2
+Inductor_SMD
+L_Fastron_PISN
+Choke, Drossel, PISN, SMD, Fastron,
+Choke Drossel PISN SMD Fastron 
+0
+2
+2
+Inductor_SMD
+L_Fastron_PISN_Handsoldering
+Choke, Drossel, PISN, SMD, Fastron,
+Choke Drossel PISN SMD Fastron 
+0
+2
+2
+Inductor_SMD
+L_Fastron_PISR
+Choke, Drossel, PISR, Fastron, SMD,
+Choke Drossel PISR Fastron SMD 
+0
+2
+2
+Inductor_SMD
+L_Fastron_PISR_Handsoldering
+Choke, Drossel, PISR, Fastron, SMD,
+Choke Drossel PISR Fastron SMD 
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-0302
+Ferrocore DLG-0302 unshielded SMD power inductor, 3.0x2.8x2.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-0302
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-0403
+ Ferrocore DLG-0403 unshielded SMD power inductor, 4.5x4.0x3.2mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-0403
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-0504
+Ferrocore DLG-0504 unshielded SMD power inductor, 5.8x5.2x4.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-0504
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-0703
+Ferrocore DLG-0703 unshielded SMD power inductor, 7.8x7.0x3.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-0703
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-0705
+Ferrocore DLG-0705 unshielded SMD power inductor, 7.8x7.0x5.0mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-0705
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-1004
+Ferrocore DLG-1004 unshielded SMD power inductor, 10.0x9.0x4.0mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-1004
+0
+2
+2
+Inductor_SMD
+L_Ferrocore_DLG-1005
+Ferrocore DLG-1005 unshielded SMD power inductor, 10.0x9.0x5.4mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf
+smd inductor dlg-1005
+0
+2
+2
+Inductor_SMD
+L_KOHERelec_MDA5030
+Inductor, KOHERelec, MDA5030, 5.2x5.2x2.8mm, (http://www.kohergroup.com/template/default/pdf/MDA5030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor high-current power shielded
+0
+2
+2
+Inductor_SMD
+L_KOHERelec_MDA7030
+Inductor, KOHERelec, MDA7030, 7.1x6.6x2.8mm, (http://www.kohergroup.com/template/default/pdf/MDA7030.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor high-current power shielded
+0
+2
+2
+Inductor_SMD
+L_Murata_DEM35xxC
+https://www.murata.com/~/media/webrenewal/products/inductor/chip/tokoproducts/wirewoundferritetypeforpl/m_dem3518c.ashx
+Inductor SMD DEM35xxC
+0
+2
+2
+Inductor_SMD
+L_Murata_DFE201610P
+Inductor, Murata, DFE201610P, 2.0x1.6x1.0mm, (https://www.murata.com/~/media/webrenewal/products/inductor/chip/tokoproducts/wirewoundmetalalloychiptype/m_dfe201610p.ashx), generated with kicad-footprint-generator gen_inductor.py
+Inductor power chip flatwire
+0
+2
+2
+Inductor_SMD
+L_Murata_LQH2MCNxxxx02_2.0x1.6mm
+Inductor, Murata, LQH2MCN_02 series, 1.6x2.0x0.9mm (https://search.murata.co.jp/Ceramy/image/img/P02/JELF243A-0053.pdf)
+chip coil inductor Murata LQH2MC
+0
+2
+2
+Inductor_SMD
+L_Murata_LQH55DN_5.7x5.0mm
+Inductor, SMD, 5.7x5.0x4.7mm, https://search.murata.co.jp/Ceramy/image/img/P02/JELF243A-0045.pdf
+inductor smd
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_1turn_HDM0131A
+Neosid, Air-Coil, SML, 1turn, HDM0131A,
+Neosid Air-Coil SML 1turn HDM0131A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_2turn_HAM0231A
+Neosid, Air-Coil, SML, 2turn, HAM0231A,
+Neosid Air-Coil SML 2turn HAM0231A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_2turn_HDM0231A
+Neosid, Air-Coil, SML, 2turn, HDM0231A,
+Neosid Air-Coil SML 2turn HDM0231A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_3turn_HAM0331A
+Neosid, Air-Coil, SML, 2turn, HAM0331A,
+Neosid Air-Coil SML 3turn HAM0331A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_3turn_HDM0331A
+Neosid, Air-Coil, SML, 3turn, HDM0331A,
+Neosid Air-Coil SML 3turn HDM0331A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_4turn_HAM0431A
+Neosid, Air-Coil, SML, 4turn, HAM0431A,
+Neosid Air-Coil SML 4turn HAM0431A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_4turn_HDM0431A
+Neosid, Air-Coil, SML, 4turn, HDM0431A,
+Neosid Air-Coil SML 4turn HDM0431A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_5turn_HAM0531A
+Neosid, Air-Coil, SML, 5turn, HAM0531A,
+Neosid Air-Coil SML 5turn HAM0531A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_5turn_HDM0531A
+Neosid, Air-Coil, SML, 5turn, HDM0531A,
+Neosid Air-Coil SML 5turn HDM0531A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_6-10turn_HAM0631A-HAM1031A
+Neosid, Air-Coil, SML, 6-10turn, HAM0631A-HAM1031A,
+Neosid Air-Coil SML 6-10turn HAM0631A-HAM1031A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_6-10turn_HDM0431A-HDM1031A
+Neosid, Air-Coil, SML, 6-10turn, HDM0431A-HDM1031A,
+Neosid Air-Coil SML 6-10turn HDM0431A-HDM1031A
+0
+2
+2
+Inductor_SMD
+L_Neosid_Air-Coil_SML_6turn_HAM0631A
+Neosid, Air-Coil, SML, 6turn, HAM0631A,
+Neosid Air-Coil SML 6turn HAM0631A
+0
+2
+2
+Inductor_SMD
+L_Neosid_MicroCoil_Ms36-L
+Neosid, Micro Coil, Inductor, Ms36-L, SMD, Fixed inductor, anti clockwise, https://neosid.de/en/products/inductors/rod-core-chokes/smd-rod-core-chokes/52026/ms-36/7-h?c=94
+Neosid Micro Coil Inductor Ms36-L SMD Fixed inductor anti clockwise
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms42
+Neosid, Inductor, SMs42, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_Ms42.pdf
+Neosid Inductor SMs42 Fixed inductor SMD magneticaly shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms50
+Neosid, Power Inductor, Ms50, SMD, Fixed inductor, https://neosid.de/import-data/product-pdf/neoFestind_Ms50.pdf
+Neosid Power Inductor Ms50 SMD Fixed inductor
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms50T
+Neosid, Power Inductor, Ms50T, SMD, Fixed inductor,  high temperature, https://neosid.de/import-data/product-pdf/neoFestind_Ms50T.pdf
+Neosid Power Inductor Ms50T SMD Fixed inductor high temperature
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms85
+Neosid, Ms85, Ms85T, SMD Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms85.pdf
+Neosid Ms85 Ms85T SMD Inductor Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms85T
+Neosid, Ms85, Ms85T, SMD Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms85T.pdf
+Neosid Ms85 Ms85T SMD Inductor Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms95
+Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95.pdf
+NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms95T
+Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95T.pdf
+NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_Ms95a
+Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95a.pdf
+NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-NE95H
+Neosid, Inductor,SM-NE95H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE95H.pdf
+Neosid Inductor SM-NE95H Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-NE127
+Neosid, Inductor, SM-NE127, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE127.pdf
+Neosid Inductor SM-NE127 Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-NE127_HandSoldering
+Neosid, Inductor, SM-NE127, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE127.pdf
+Neosid Inductor SM-NE127 Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-NE150
+Neosid, Inductor, SM-NE150, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE150.pdf
+Neosid Inductor SM-NE150 Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-PIC0512H
+Neosid, Inductor, PIC0512H, Power Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0512H.pdf
+Neosid Inductor PIC0512H Power Inductor Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-PIC0602H
+Neosid, Power Inductor, SM-PIC0602H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0602H.pdf
+Neosid Power Inductor SM-PIC0602H Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-PIC0612H
+Neosid, Power Inductor, SM-PIC0612H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0612H.pdf
+Neosid Power Inductor SM-PIC0612H Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SM-PIC1004H
+Neosid, Inductor, SM-PIC1004H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC1004H.pdf
+Neosid Inductor SM-PIC1004H Fixed inductor SMD
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMS-ME3010
+Neosid, Inductor, SMS-ME3010, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMSME3010.pdf
+Neosid Inductor SMS-ME3010 Fixed inductor SMD magnetically shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMS-ME3015
+Neosid, Power Inductor, SMS-ME3015, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMSME3015.pdf
+Neosid Power Inductor SMS-ME3015 Fixed inductor SMD magnetically shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMs42
+Neosid, Inductor, SMs42, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs42.pdf
+Neosid Inductor SMs42 Fixed inductor SMD magneticaly shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMs50
+Neosid, Inductor, SMs50, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs50.pdf
+Neosid Inductor SMs50 Fixed inductor SMD magneticaly shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMs85
+Neosid, Inductor, SMs85, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs85.pdf
+Neosid Inductor SMs85 Fixed inductor SMD magnetically shielded
+0
+2
+2
+Inductor_SMD
+L_Neosid_SMs95_SMs95p
+Neosid, Inductor, SMs95, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMs95SMs95p.pdf
+Neosid Inductor SMs95 Fixed inductor SMD magnetically shielded
+0
+2
+2
+Inductor_SMD
+L_Pulse_P059x
+1:1, Power Inductor, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/p0599nl
+inductor coil choke
+0
+4
+4
+Inductor_SMD
+L_Pulse_PA4320
+Inductor SMD Pulse PA4320 http://productfinder.pulseeng.com/products/datasheets/P787.pdf
+Inductor SMD Pulse PA4320
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA4332
+Inductor, Pulse, PA4332, 4.2x4.2x2.0mm, (https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/pa4332.222nlt), generated with kicad-footprint-generator gen_inductor.py
+Inductor Pulse SMT PA4332
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA4340
+Inductor, Pulse, PA4340, 6.0x5.4x3.0mm, (https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/PA4340.183NLT), generated with kicad-footprint-generator gen_inductor.py
+Inductor Pulse SMT PA4340
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA4341
+Inductor, Pulse, PA4341, 6.4x6.6x2.8mm, (https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/pa4341.102anlt), generated with kicad-footprint-generator gen_inductor.py
+Inductor Pulse SMT PA4341
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA4344
+Pulse PA4344 / PM4344 Series SMD Inductors https://productfinder.pulseelectronics.com/api/public/uploads/product-attachments/datasheet_p771_1608107700.pdf
+Pulse PA4344 PM4344 Series SMD Inductors
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA4349
+Shielded Molded High Current Power Inductors 23.5x22mm, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/pa4349.104anlt
+Shielded Molded High Current Power Inductor
+0
+2
+2
+Inductor_SMD
+L_Pulse_PA5402
+Inductor, Pulse, PA5402, 4.45x4.06x1.8mm, (https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/PM5402.222NLT), generated with kicad-footprint-generator gen_inductor.py
+Inductor Pulse SMT PA5402
+0
+2
+2
+Inductor_SMD
+L_SOREDE_SNR.1050_10x10x5mm
+Sorede 10x10x5mm Power Inductor, https://datasheet.lcsc.com/lcsc/2201141530_SOREDE-SNR-1050-TYD4R7MT00_C2942304.pdf
+Inductor Sorede SNR 
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI62
+Inductor, SXN, SMDRI62, 6.5x6.8x3.0mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI64
+Inductor, SXN, SMDRI64, 6.5x6.8x5.0mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI73
+Inductor, SXN, SMDRI73, 7.5x7.5x3.4mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI74
+Inductor, SXN, SMDRI74, 7.5x7.5x4.5mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI124
+Inductor, SXN, SMDRI124, 12.3x12.3x4.5mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI125
+Inductor, SXN, SMDRI125, 12.3x12.3x6.0mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_SXN_SMDRI127
+Inductor, SXN, SMDRI127, 12.3x12.3x8.0mm, (https://www.sxndz.com/upload/202108/16/202108161607454319.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor sxn smdri
+0
+2
+2
+Inductor_SMD
+L_Sagami_CER1242B
+Inductor, Sagami, h=4.5mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf
+inductor sagami cer12xxb smd
+0
+2
+2
+Inductor_SMD
+L_Sagami_CER1257B
+Inductor, Sagami, h=6.0mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf
+inductor sagami cer12xxb smd
+0
+2
+2
+Inductor_SMD
+L_Sagami_CER1277B
+Inductor, Sagami, h=8.0mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf
+inductor sagami cer12xxb smd
+0
+2
+2
+Inductor_SMD
+L_Sagami_CWR1242C
+Sagami power inductor, CWR1242C, H=4.5mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf)
+inductor sagami cwr12xx smd
+0
+4
+2
+Inductor_SMD
+L_Sagami_CWR1257C
+Sagami power inductor, CWR1242C, H=6.0mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf)
+inductor sagami cwr12xx smd
+0
+4
+2
+Inductor_SMD
+L_Sagami_CWR1277C
+Sagami power inductor, CWR1242C, H=7.7mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf)
+inductor sagami cwr12xx smd
+0
+4
+2
+Inductor_SMD
+L_SigTra_SC3316F
+http://www.signaltransformer.com/sites/all/pdf/smd/P080_SC3316F.pdf
+Choke 
+0
+2
+2
+Inductor_SMD
+L_Sumida_CDMC6D28_7.25x6.5mm
+SMD Power Inductor (http://products.sumida.com/products/pdf/CDMC6D28.pdf)
+Inductor Sumida SMD CDMC6D28
+0
+2
+2
+Inductor_SMD
+L_Sumida_CR75
+Inductor, Sumida, 8.1mm × 7.3mm × 5.5 mm, Unshielded, http://products.sumida.com/products/pdf/CR75.pdf
+Inductor SMD CR75 Unshielded
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0402S
+Inductor, Sunlord, MWSA0402S, 4.4x4.2x1.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0412S
+Inductor, Sunlord, MWSA0412S, 4.4x4.2x1.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0503S
+Inductor, Sunlord, MWSA0503S, 5.4x5.2x2.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0518S
+Inductor, Sunlord, MWSA0518S, 5.4x5.2x1.6mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0602S
+Inductor, Sunlord, MWSA0602S, 7.0x6.6x1.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0603S
+Inductor, Sunlord, MWSA0603S, 7.0x6.6x2.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0604S
+Inductor, Sunlord, MWSA0604S, 7.0x6.6x3.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0605S
+Inductor, Sunlord, MWSA0605S, 7.0x6.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0615S
+Inductor, Sunlord, MWSA0615S, 7.0x6.6x1.3mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0618S
+Inductor, Sunlord, MWSA0618S, 7.0x6.6x1.6mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0624S
+Inductor, Sunlord, MWSA0624S, 7.0x6.6x2.2mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA0804S
+Inductor, Sunlord, MWSA0804S, 8.2x8.8x3.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1003S
+Inductor, Sunlord, MWSA1003S, 11.5x10.0x2.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1004S
+Inductor, Sunlord, MWSA1004S, 11.0x10.0x3.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1005S
+Inductor, Sunlord, MWSA1005S, 11.5x10.0x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-1R0
+Inductor, Sunlord, MWSA1204S-1R0, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-1R5
+Inductor, Sunlord, MWSA1204S-1R5, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-2R2
+Inductor, Sunlord, MWSA1204S-2R2, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-3R3
+Inductor, Sunlord, MWSA1204S-3R3, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-4R7
+Inductor, Sunlord, MWSA1204S-4R7, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-6R8
+Inductor, Sunlord, MWSA1204S-6R8, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-100
+Inductor, Sunlord, MWSA1204S-100, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-150
+Inductor, Sunlord, MWSA1204S-150, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-220
+Inductor, Sunlord, MWSA1204S-220, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-R22
+Inductor, Sunlord, MWSA1204S-R22, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-R47
+Inductor, Sunlord, MWSA1204S-R47, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-R68
+Inductor, Sunlord, MWSA1204S-R68, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1204S-R82
+Inductor, Sunlord, MWSA1204S-R82, 13.45x12.8x4.0mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-1R0
+Inductor, Sunlord, MWSA1205S-1R0, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-1R5
+Inductor, Sunlord, MWSA1205S-1R5, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-2R2
+Inductor, Sunlord, MWSA1205S-2R2, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-3R3
+Inductor, Sunlord, MWSA1205S-3R3, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-4R7
+Inductor, Sunlord, MWSA1205S-4R7, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-6R8
+Inductor, Sunlord, MWSA1205S-6R8, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-100
+Inductor, Sunlord, MWSA1205S-100, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-150
+Inductor, Sunlord, MWSA1205S-150, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-220
+Inductor, Sunlord, MWSA1205S-220, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-330
+Inductor, Sunlord, MWSA1205S-330, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-470
+Inductor, Sunlord, MWSA1205S-470, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-R22
+Inductor, Sunlord, MWSA1205S-R22, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-R36
+Inductor, Sunlord, MWSA1205S-R36, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-R50
+Inductor, Sunlord, MWSA1205S-R50, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-R68
+Inductor, Sunlord, MWSA1205S-R68, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1205S-R82
+Inductor, Sunlord, MWSA1205S-R82, 13.45x12.6x4.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-1R5
+Inductor, Sunlord, MWSA1206S-1R5, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-2R2
+Inductor, Sunlord, MWSA1206S-2R2, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-3R3
+Inductor, Sunlord, MWSA1206S-3R3, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-4R7
+Inductor, Sunlord, MWSA1206S-4R7, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-5R6
+Inductor, Sunlord, MWSA1206S-5R6, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-6R8
+Inductor, Sunlord, MWSA1206S-6R8, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-8R2
+Inductor, Sunlord, MWSA1206S-8R2, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-100
+Inductor, Sunlord, MWSA1206S-100, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-101
+Inductor, Sunlord, MWSA1206S-101, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-120
+Inductor, Sunlord, MWSA1206S-120, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-121
+Inductor, Sunlord, MWSA1206S-121, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-150
+Inductor, Sunlord, MWSA1206S-150, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-151
+Inductor, Sunlord, MWSA1206S-151, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-180
+Inductor, Sunlord, MWSA1206S-180, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-220
+Inductor, Sunlord, MWSA1206S-220, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-270
+Inductor, Sunlord, MWSA1206S-270, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-330
+Inductor, Sunlord, MWSA1206S-330, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-470
+Inductor, Sunlord, MWSA1206S-470, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-680
+Inductor, Sunlord, MWSA1206S-680, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1206S-R68
+Inductor, Sunlord, MWSA1206S-R68, 13.45x12.6x5.8mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1265S
+Inductor, Sunlord, MWSA1265S, 13.45x12.6x6.5mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA1707S
+Inductor, Sunlord, MWSA1707S, 17.15x17.15x6.7mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_MWSA2213S
+Inductor, Sunlord, MWSA2213S, 23.5x22.0x12.6mm, (https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor mwsa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA3010S
+Inductor, Sunlord, SWPA3010S, 3.0x3.0x1.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA3012S
+Inductor, Sunlord, SWPA3012S, 3.0x3.0x1.2mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA3015S
+Inductor, Sunlord, SWPA3015S, 3.0x3.0x1.5mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4010S
+Inductor, Sunlord, SWPA4010S, 4.0x4.0x1.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4012S
+Inductor, Sunlord, SWPA4012S, 4.0x4.0x1.2mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4018S
+Inductor, Sunlord, SWPA4018S, 4.0x4.0x1.8mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4020S
+Inductor, Sunlord, SWPA4020S, 4.0x4.0x2.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4026S
+Inductor, Sunlord, SWPA4026S, 4.0x4.0x2.6mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA4030S
+Inductor, Sunlord, SWPA4030S, 4.0x4.0x3.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA5012S
+Inductor, Sunlord, SWPA5012S, 5.0x5.0x1.2mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA5020S
+Inductor, Sunlord, SWPA5020S, 5.0x5.0x2.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA5040S
+Inductor, Sunlord, SWPA5040S, 5.0x5.0x4.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA6020S
+Inductor, Sunlord, SWPA6020S, 6.0x6.0x2.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA6028S
+Inductor, Sunlord, SWPA6028S, 6.0x6.0x2.8mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA6040S
+Inductor, Sunlord, SWPA6040S, 6.0x6.0x4.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA6045S
+Inductor, Sunlord, SWPA6045S, 6.0x6.0x4.5mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA8040S
+Inductor, Sunlord, SWPA8040S, 8.0x8.0x4.2mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA252010S
+Inductor, Sunlord, SWPA252010S, 2.5x2.0x1.0mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWPA252012S
+Inductor, Sunlord, SWPA252012S, 2.5x2.0x1.2mm, (https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor swpa
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWRB1204S
+Inductor, Sunlord, SWRB1204S, 12.5x12.5x5.0mm, (https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor swrb
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWRB1205S
+Inductor, Sunlord, SWRB1205S, 12.5x12.5x6.0mm, (https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor swrb
+0
+2
+2
+Inductor_SMD
+L_Sunlord_SWRB1207S
+Inductor, Sunlord, SWRB1207S, 12.5x12.5x8.0mm, (https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en), generated with kicad-footprint-generator gen_inductor.py
+Inductor swrb
+0
+2
+2
+Inductor_SMD
+L_TDK_MLZ1608
+Inductor, TDK, MLZ1608, 1.6x0.8x0.8mm, ( "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz1608_en.pdf"), generated with kicad-footprint-generator gen_inductor.py
+Inductor MLZ
+0
+2
+2
+Inductor_SMD
+L_TDK_MLZ2012_h0.85mm
+Inductor, TDK, MLZ2012_h0.85mm, 2.0x1.25x0.85mm, ( "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz2012_en.pdf"), generated with kicad-footprint-generator gen_inductor.py
+Inductor MLZ
+0
+2
+2
+Inductor_SMD
+L_TDK_MLZ2012_h1.25mm
+Inductor, TDK, MLZ2012_h1.25mm, 2.0x1.25x1.25mm, ( "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz2012_en.pdf"), generated with kicad-footprint-generator gen_inductor.py
+Inductor MLZ
+0
+2
+2
+Inductor_SMD
+L_TDK_NLV25_2.5x2.0mm
+TDK NLV25, 2.5x2.0x1.8mm, https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_standard_nlv25-ef_en.pdf
+tdk nlv25 nlcv25 nlfv25
+0
+2
+2
+Inductor_SMD
+L_TDK_NLV32_3.2x2.5mm
+TDK NLV32, 3.2x2.5x2.2mm, https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_standard_nlv32-ef_en.pdf
+tdk nlv32 nlcv32 nlfv32
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF6025
+Inductor, TDK, SLF6025, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6025_en.pdf)
+Inductor TDK_SLF6025
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF6028
+Inductor, TDK, SLF6028, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6028_en.pdf)
+Inductor TDK_SLF6028
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF6045
+Inductor, TDK, SLF6045, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6045_en.pdf)
+Inductor TDK_SLF6045
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF7032
+Inductor, TDK, SLF7032, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7032_en.pdf)
+Inductor TDK_SLF7032
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF7045
+Inductor, TDK, SLF7045, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7045_en.pdf)
+Inductor TDK_SLF7045
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF7055
+Inductor, TDK, SLF7055, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7055_en.pdf)
+Inductor TDK_SLF7055
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF10145
+Inductor, TDK, SLF10145, 10.1mmx10.1mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf10145-h_en.pdf)
+Inductor TDK_SLF10145
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF10165
+Inductor, TDK, SLF10165, 10.1mmx10.1mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_power_slf10165_en.pdf)
+Inductor TDK_SLF10165
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF12555
+Inductor, TDK, SLF12555, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_power_slf12555_en.pdf)
+Inductor SLF12555
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF12565
+Inductor, TDK, SLF12565, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf12565-h_en.pdf)
+Inductor SLF12565
+0
+2
+2
+Inductor_SMD
+L_TDK_SLF12575
+Inductor, TDK, SLF12575, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf12575-h_en.pdf)
+Inductor SLF12575
+0
+2
+2
+Inductor_SMD
+L_TDK_VLF10040
+Inductor,TDK, TDK-VLP-8040, 8.6mmx8.6mm
+inductor TDK VLP smd VLF10040
+0
+2
+2
+Inductor_SMD
+L_TDK_VLP8040
+Inductor,TDK, TDK-VLP-8040, 8.6mmx8.6mm
+inductor TDK VLP smd VLP8040
+0
+2
+2
+Inductor_SMD
+L_TDK_VLS6045EX_VLS6045AF
+Inductor,TDK, VLS-6045, 6x6x4.5mm, https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_power_vls6045ex_en.pdf
+inductor TDK VLS SMD VLS6045EF VLS6045AF
+0
+2
+2
+Inductor_SMD
+L_TaiTech_TMPC1265_13.5x12.5mm
+Tai Tech TMPC1265 series SMD inductor https://datasheet.lcsc.com/lcsc/2009171439_TAI-TECH-TMPC1265HP-100MG-D_C305223.pdf, 13.5x12.5x6.2mm
+Tai Tech TMPC1265 SMD inductor
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_BK_Array_1206_3216Metric
+Ferrite Bead Array 4x0603, Taiyo Yuden BK Series (see https://www.yuden.co.jp/productdata/catalog/mlci09_e.pdf)
+ferrite bead array
+0
+8
+8
+Inductor_SMD
+L_Taiyo-Yuden_MD-1616
+Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-1616, 1.6mmx1.6mm
+inductor taiyo-yuden md smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_MD-2020
+Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-2020, 2.0mmx2.0mm
+inductor taiyo-yuden md smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_MD-3030
+Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-3030, 3.0mmx3.0mm
+inductor taiyo-yuden md smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_MD-4040
+Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-4040, 4.0mmx4.0mm
+inductor taiyo-yuden md smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_MD-5050
+Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-5050, 5.0mmx5.0mm
+inductor taiyo-yuden md smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-20xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-20xx, 2.0mmx2.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-20xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-20xx, 2.0mmx2.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-24xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-24xx, 2.4mmx2.4mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-24xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-24xx, 2.4mmx2.4mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-30xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-30xx, 3.0mmx3.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-30xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-30xx, 3.0mmx3.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-40xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-40xx, 4.0mmx4.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-40xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-40xx, 4.0mmx4.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-50xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-50xx, 4.9mmx4.9mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-50xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-50xx, 4.9mmx4.9mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-60xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-60xx, 6.0mmx6.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-60xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-60xx, 6.0mmx6.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-80xx
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-80xx, 8.0mmx8.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-80xx_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-80xx, 8.0mmx8.0mm
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-10050_9.8x10.0mm
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-10050, 9.8mmx10.0mm, https://ds.yuden.co.jp/TYCOMPAS/or/specSheet?pn=NR10050T1R3N
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_Taiyo-Yuden_NR-10050_9.8x10.0mm_HandSoldering
+Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-10050, 9.8mmx10.0mm, https://ds.yuden.co.jp/TYCOMPAS/or/specSheet?pn=NR10050T1R3N
+inductor taiyo-yuden nr smd
+0
+2
+2
+Inductor_SMD
+L_TracoPower_TCK-047_5.2x5.8mm
+Inductor, Traco, TCK-047, 5.2x5.8mm, https://www.tracopower.com/products/tck047.pdf
+inductor smd traco
+0
+2
+2
+Inductor_SMD
+L_TracoPower_TCK-141
+Choke, SMD, 4.0x4.0mm 2.1mm height, https://www.tracopower.com/products/tck141.pdf
+Choke SMD
+0
+2
+2
+Inductor_SMD
+L_Vishay_IFSC-1515AH_4x4x1.8mm
+Low Profile, High Current Inductors (https://www.vishay.com/docs/34295/sc15ah01.pdf)
+SMD Vishay Inductor Low Profile
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-1212
+Inductor, Vishay, IHLP series, 3.0mmx3.0mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-1616
+Inductor, Vishay, IHLP series, 4.1mmx4.1mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-2020
+Inductor, Vishay, IHLP series, 5.1mmx5.1mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-2525
+Inductor, Vishay, IHLP series, 6.3mmx6.3mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-4040
+Inductor, Vishay, IHLP series, 10.2mmx10.2mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-5050
+Inductor, Vishay, IHLP series, 12.7mmx12.7mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHLP-6767
+Inductor, Vishay, IHLP series, 17.0mmx17.0mm
+inductor vishay ihlp smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHSM-3825
+Inductor, Vishay, Vishay_IHSM-3825, http://www.vishay.com/docs/34018/ihsm3825.pdf, 11.2mmx6.3mm
+inductor vishay icsm smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHSM-4825
+Inductor, Vishay, Vishay_IHSM-4825, http://www.vishay.com/docs/34019/ihsm4825.pdf, 13.7mmx6.3mm
+inductor vishay icsm smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHSM-5832
+Inductor, Vishay, Vishay_IHSM-5832, http://www.vishay.com/docs/34020/ihsm5832.pdf, 16.3mmx8.1mm
+inductor vishay icsm smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHSM-7382
+Inductor, Vishay, Vishay_IHSM-7382, http://www.vishay.com/docs/34021/ihsm7832.pdf, 21.3mmx8.1mm
+inductor vishay icsm smd
+0
+2
+2
+Inductor_SMD
+L_Vishay_IHSM-7832
+Inductor, Vishay, Vishay_IHSM-7832, http://www.vishay.com/docs/34021/ihsm7832.pdf, 19.8mmx8.1mm
+inductor vishay icsm smd
+0
+2
+2
+Inductor_SMD
+L_Walsin_WLFM201209x
+Inductor, Walsin, WLFM201209x, 2.0x1.25x0.9mm, (http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ferrite multilayer power
+0
+2
+2
+Inductor_SMD
+L_Walsin_WLFM201609x
+Inductor, Walsin, WLFM201609x, 2.0x1.6x0.9mm, (http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ferrite multilayer power
+0
+2
+2
+Inductor_SMD
+L_Walsin_WLFM252009x
+Inductor, Walsin, WLFM252009x, 2.5x2.0x0.9mm, (http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf), generated with kicad-footprint-generator gen_inductor.py
+Inductor ferrite multilayer power
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCF-2013
+7443630070, http://katalog.we-online.de/pbs/datasheet/7443630070.pdf
+inductor shielded wuerth hcf
+0
+3
+2
+Inductor_SMD
+L_Wuerth_HCF-2815
+74436410150, http://katalog.we-online.de/pbs/datasheet/74436410150.pdf
+inductor shielded wuerth hcf
+0
+3
+2
+Inductor_SMD
+L_Wuerth_HCF-2818
+7443640330, http://katalog.we-online.de/pbs/datasheet/7443640330.pdf
+inductor shielded wuerth hcf
+0
+3
+2
+Inductor_SMD
+L_Wuerth_HCI-1030
+Inductor, Wuerth Elektronik, Wuerth_HCI-1030, 10.6mmx10.6mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1040
+Inductor, Wuerth Elektronik, Wuerth_HCI-1040, 10.2mmx10.2mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1050
+Inductor, Wuerth Elektronik, Wuerth_HCI-1050, 10.2mmx10.2mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1335
+Inductor, Wuerth Elektronik, Wuerth_HCI-1335, 12.8mmx12.8mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1350
+Inductor, Wuerth Elektronik, Wuerth_HCI-1350, 12.8mmx12.8mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1365
+Inductor, Wuerth Elektronik, Wuerth_HCI-1365, 12.8mmx12.8mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-1890
+Inductor, Wuerth Elektronik, Wuerth_HCI-1890, 18.2mmx18.2mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-2212
+Inductor, Wuerth Elektronik, Wuerth_HCI-2212, 22.5mmx22.0mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-5040
+Inductor, Wuerth Elektronik, Wuerth_HCI-5040, 5.5mmx5.2mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-7030
+Inductor, Wuerth Elektronik, Wuerth_HCI-7030, 6.9mmx6.9mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-7040
+Inductor, Wuerth Elektronik, Wuerth_HCI-7040, 6.9mmx6.9mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCI-7050
+Inductor, Wuerth Elektronik, Wuerth_HCI-7050, 6.9mmx6.9mm
+inductor wurth hci smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1050
+Inductor, Wuerth Elektronik, Wuerth_HCM-1050, 10.2mmx7.0mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1052
+Inductor, Wuerth Elektronik, Wuerth_HCM-1052, 10.5mmx10.3mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1070
+Inductor, Wuerth Elektronik, Wuerth_HCM-1070, 10.1mmx7.0mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1078
+Inductor, Wuerth Elektronik, Wuerth_HCM-1078, 9.4mmx6.2mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1190
+Inductor, Wuerth Elektronik, Wuerth_HCM-1190, 10.5mmx11.0mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1240
+Inductor, Wuerth Elektronik, Wuerth_HCM-1240, 10.0mmx11.8mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1350
+Inductor, Wuerth Elektronik, Wuerth_HCM-1350, 13.5mmx13.3mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-1390
+Inductor, Wuerth Elektronik, Wuerth_HCM-1390, 12.5mmx13.0mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-7050
+Inductor, Wuerth Elektronik, Wuerth_HCM-7050, 7.2mmx7.0mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_HCM-7070
+Inductor, Wuerth Elektronik, Wuerth_HCM-7070, 7.4mmx7.2mm
+inductor wurth hcm smd
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-1610
+Inductor, Wuerth, MAPI-1610, 1.6x1.6x1.0mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-2010
+Inductor, Wuerth, MAPI-2010, 2.0x1.6x1.0mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-2506
+Inductor, Wuerth, MAPI-2506, 2.5x2.0x0.6mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-2508
+Inductor, Wuerth, MAPI-2508, 2.5x2.0x0.8mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-2510
+Inductor, Wuerth, MAPI-2510, 2.5x2.0x1.0mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-2512
+Inductor, Wuerth, MAPI-2512, 2.5x2.0x1.2mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-3010
+Inductor, Wuerth, MAPI-3010, 3.0x3.0x1.0mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-3012
+Inductor, Wuerth, MAPI-3012, 3.0x3.0x1.2mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-3015
+Inductor, Wuerth, MAPI-3015, 3.0x3.0x1.5mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-3020
+Inductor, Wuerth, MAPI-3020, 3.0x3.0x2.0mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-4020
+Inductor, Wuerth, MAPI-4020, 4.1x4.1x2.1mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-4030
+Inductor, Wuerth, MAPI-4030, 4.1x4.1x3.1mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-5020
+Inductor, Wuerth, MAPI-5020, 5.4x5.4x2.1mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_MAPI-5030
+Inductor, Wuerth, MAPI-5030, 5.4x5.4x3.1mm, (https://www.we-online.com/en/components/products/WE-MAPI?kicad), generated with kicad-footprint-generator gen_inductor.py
+Inductor Würth -SMT
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-DD-Typ-L-Typ-XL-Typ-XXL
+Shielded Coupled Inductor, Wuerth Elektronik, WE-DD, SMD, Typ L, Typ XL, Typ XXL, https://katalog.we-online.com/pbs/datasheet/744874001.pdf
+Choke Coupled Double Inductor SMD Wuerth WE-DD TypL TypXL TypXXL 
+0
+4
+4
+Inductor_SMD
+L_Wuerth_WE-DD-Typ-M-Typ-S
+Shielded Coupled Inductor, Wuerth Elektronik, WE-DD, SMD, Typ M, Typ S, https://katalog.we-online.com/pbs/datasheet/744878001.pdf, https://katalog.we-online.de/pbs/datasheet/744877001.pdf
+Choke Coupled Double Inductor SMD Wuerth WE-DD TypM TypS
+0
+4
+4
+Inductor_SMD
+L_Wuerth_WE-GF-1210
+Unshielded Inductor, Wuerth Elektronik, WE-GF, SMD, 1210, https://www.we-online.de/katalog/datasheet/74476401.pdf
+Unshielded Inductor WE-GF 1210 Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD-Typ-7345
+Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, 7345, https://katalog.we-online.com/pbs/datasheet/744777001.pdf
+Choke Shielded Power Inductor WE-PD 7345 Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD-Typ-LS
+Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, Typ LS, https://katalog.we-online.com/pbs/datasheet/7447715906.pdf
+Choke Shielded Power Inductor WE-PD TypLS Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD-Typ-LS_Handsoldering
+Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, Typ LS, Handsoldering, https://katalog.we-online.com/pbs/datasheet/7447715906.pdf
+Choke Shielded Power Inductor WE-PD TypLS Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD-Typ-M-Typ-S
+Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMT, Typ M, Typ S, https://katalog.we-online.com/pbs/datasheet/744778005.pdf
+Choke Shielded Power Inductor WE-PD TypM TypS Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD-Typ-M-Typ-S_Handsoldering
+Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMT, Typ M, Typ S, Handsoldering, https://katalog.we-online.com/pbs/datasheet/744778005.pdf
+Choke Shielded Power Inductor WE-PD TypM TypS Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD2-Typ-L
+Power Inductor, Wuerth Elektronik, WE-PD2, SMD, Typ L, , https://katalog.we-online.com/pbs/datasheet/74477510.pdf
+Choke Power Inductor WE-PD2 TypL Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD2-Typ-MS
+Power Inductor, Wuerth Elektronik, WE-PD2, SMD, Typ MS, https://katalog.we-online.com/pbs/datasheet/744774022.pdf
+Choke Power Inductor WE-PD2 TypMS Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD2-Typ-XL
+Power Inductor, Wuerth Elektronik, WE-PD2, SMT, Typ XL, https://katalog.we-online.com/pbs/datasheet/744776012.pdf
+Choke Power Inductor WE-PD2 TypXL Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PD4-Typ-X
+Power Inductor, Wuerth Elektronik, WE-PD4, SMT, Typ X, https://katalog.we-online.de/pbs/datasheet/74458001.pdf
+Choke Power Inductor WE-PD4 TypX Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PDF
+Shielded Power Inductor, Wuerth Elektronik, WE-PDF, SMD, https://katalog.we-online.de/pbs/datasheet/7447797022.pdf
+Choke Shielded Power Inductor WE-PDF Wuerth
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-PDF_Handsoldering
+Shielded Power Inductor, Wuerth Elektronik, WE-PDF, SMD, Handsoldering, https://katalog.we-online.de/pbs/datasheet/7447797022.pdf
+Choke Shielded Power Inductor WE-PDF Wuerth Handsoldering
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-TPC-3816
+L_Wuerth_WE-TPC-3816 StepUp generated footprint, http://katalog.we-online.de/pbs/datasheet/7440310047.pdf
+wurth wuerth smd inductor
+0
+2
+2
+Inductor_SMD
+L_Wuerth_WE-XHMI-8080
+Inductor, Wuerth, WE-XHMI 8080, 8.3mmx8.8mm (Script generated with StandardBox.py) (https://katalog.we-online.de/pbs/datasheet/74439358068.pdf)
+Inductor Wuerth WE-XHMI 8080
+0
+2
+2
+Inductor_SMD
+L_Wurth_WE-CAIR-5910
+WE-CAIR Air coil, https://www.we-online.com/components/products/datasheet/744918254.pdf
+air coil inductor wurth we cair
+0
+2
+2
+Inductor_SMD_Wurth
+L_Wurth_WE-LQSH-2010
+Semi-Shielded High Saturation Power Inductor, body 2x1.6mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-2010
+SMT
+0
+2
+2
+Inductor_SMD_Wurth
+L_Wurth_WE-LQSH-2512
+Semi-Shielded High Saturation Power Inductor, body 2.5x2mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-2512
+SMT
+0
+2
+2
+Inductor_SMD_Wurth
+L_Wurth_WE-LQSH-3012
+Semi-Shielded High Saturation Power Inductor, body 3x3mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-3012
+SMT
+0
+2
+2
+Inductor_SMD_Wurth
+L_Wurth_WE-LQSH-4020
+Semi-Shielded High Saturation Power Inductor, body 4x4mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-4020
+SMT
+0
+2
+2
+Inductor_THT
+Choke_EPCOS_B82722A
+Current-Compensated Ring Core Double Chokes, EPCOS, B82722A, 22.3mmx22.7mm, https://en.tdk.eu/inf/30/db/ind_2008/b82722a_j.pdf
+chokes epcos tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN102-04-14.0x14.0mm
+Current-compensated Chokes, Schaffner, RN102-04, 14.0mmx14.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN112-04-17.7x17.1mm
+Current-compensated Chokes, Schaffner, RN112-04, 17.7mmx17.1mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN114-04-22.5x21.5mm
+Current-compensated Chokes, Schaffner, RN114-04, 22.5mmx21.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN116-04-22.5x21.5mm
+Current-compensated Chokes, Schaffner, RN116-04, 22.5mmx21.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN122-04-28.0x27.0mm
+Current-compensated Chokes, Schaffner, RN122-04, 28.0mmx27.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN142-04-33.1x32.5mm
+Current-compensated Chokes, Schaffner, RN142-04, 33.1mmx32.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN143-04-33.1x32.5mm
+Current-compensated Chokes, Schaffner, RN143-04, 33.1mmx32.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN152-04-43.0x41.8mm
+Current-compensated Chokes, Schaffner, RN152-04, 43.0mmx41.8mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN202-04-8.8x18.2mm
+Current-compensated Chokes, Schaffner, RN202-04, 8.8mmx18.2mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN204-04-9.0x14.0mm
+Current-compensated Chokes, Schaffner, RN204-04, 9.0mmx14.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN212-04-12.5x18.0mm
+Current-compensated Chokes, Schaffner, RN212-04, 12.5mmx18.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN214-04-15.5x23.0mm
+Current-compensated Chokes, Schaffner, RN214-04, 15.5mmx23.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN216-04-15.5x23.0mm
+Current-compensated Chokes, Schaffner, RN216-04, 15.5mmx23.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN218-04-12.5x18.0mm
+Current-compensated Chokes, Schaffner, RN218-04, 12.5mmx18.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN222-04-18.0x31.0mm
+Current-compensated Chokes, Schaffner, RN222-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN232-04-18.0x31.0mm
+Current-compensated Chokes, Schaffner, RN232-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+Choke_Schaffner_RN242-04-18.0x31.0mm
+Current-compensated Chokes, Schaffner, RN242-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/
+chokes schaffner tht
+0
+4
+4
+Inductor_THT
+L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2
+Inductor, Murata BL01RN1A2A2, Axial, Horizontal, pin pitch=10.00mm, length*diameter=5*3.6mm, https://www.murata.com/en-global/products/productdetail?partno=BL01RN1A2A2%23
+inductor axial horizontal
+0
+2
+2
+Inductor_THT
+L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1
+Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf
+Inductor Axial series Axial Vertical pin pitch 2.54mm  length 5.3mm diameter 2.2mm Vishay IM-1
+0
+2
+2
+Inductor_THT
+L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1
+Inductor, Axial series, Axial, Horizontal, pin pitch=7.62mm, length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf
+Inductor Axial series Axial Horizontal pin pitch 7.62mm  length 5.3mm diameter 2.2mm Vishay IM-1
+0
+2
+2
+Inductor_THT
+L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1
+Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf
+Inductor Axial series Axial Horizontal pin pitch 10.16mm  length 5.3mm diameter 2.2mm Vishay IM-1
+0
+2
+2
+Inductor_THT
+L_Axial_L6.6mm_D2.7mm_P2.54mm_Vertical_Vishay_IM-2
+Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf
+Inductor Axial series Axial Vertical pin pitch 2.54mm  length 6.6mm diameter 2.7mm Vishay IM-2
+0
+2
+2
+Inductor_THT
+L_Axial_L6.6mm_D2.7mm_P10.16mm_Horizontal_Vishay_IM-2
+Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf
+Inductor Axial series Axial Horizontal pin pitch 10.16mm  length 6.6mm diameter 2.7mm Vishay IM-2
+0
+2
+2
+Inductor_THT
+L_Axial_L7.0mm_D3.3mm_P2.54mm_Vertical_Fastron_MICC
+Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 2.54mm  length 7mm diameter 3.3mm Fastron MICC
+0
+2
+2
+Inductor_THT
+L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 7mm diameter 3.3mm Fastron MICC
+0
+2
+2
+Inductor_THT
+L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC
+Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 10.16mm  length 7mm diameter 3.3mm Fastron MICC
+0
+2
+2
+Inductor_THT
+L_Axial_L7.0mm_D3.3mm_P12.70mm_Horizontal_Fastron_MICC
+Inductor, Axial series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 12.7mm  length 7mm diameter 3.3mm Fastron MICC
+0
+2
+2
+Inductor_THT
+L_Axial_L9.5mm_D4.0mm_P2.54mm_Vertical_Fastron_SMCC
+Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf
+Inductor Axial series Axial Vertical pin pitch 2.54mm  length 9.5mm diameter 4mm Fastron SMCC
+0
+2
+2
+Inductor_THT
+L_Axial_L9.5mm_D4.0mm_P5.08mm_Vertical_Fastron_SMCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 9.5mm diameter 4mm Fastron SMCC
+0
+2
+2
+Inductor_THT
+L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=12.7mm, length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf
+Inductor Axial series Axial Horizontal pin pitch 12.7mm  length 9.5mm diameter 4mm Fastron SMCC
+0
+2
+2
+Inductor_THT
+L_Axial_L9.5mm_D4.0mm_P15.24mm_Horizontal_Fastron_SMCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf
+Inductor Axial series Axial Horizontal pin pitch 15.24mm  length 9.5mm diameter 4mm Fastron SMCC
+0
+2
+2
+Inductor_THT
+L_Axial_L11.0mm_D4.5mm_P5.08mm_Vertical_Fastron_MECC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 11mm diameter 4.5mm Fastron MECC
+0
+2
+2
+Inductor_THT
+L_Axial_L11.0mm_D4.5mm_P7.62mm_Vertical_Fastron_MECC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 11mm diameter 4.5mm Fastron MECC
+0
+2
+2
+Inductor_THT
+L_Axial_L11.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_MECC
+Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 15.24mm  length 11mm diameter 4.5mm Fastron MECC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.0mm_D5.0mm_P5.08mm_Vertical_Fastron_MISC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 12mm diameter 5mm Fastron MISC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.0mm_D5.0mm_P7.62mm_Vertical_Fastron_MISC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 12mm diameter 5mm Fastron MISC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.0mm_D5.0mm_P15.24mm_Horizontal_Fastron_MISC
+Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf
+Inductor Axial series Axial Horizontal pin pitch 15.24mm  length 12mm diameter 5mm Fastron MISC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.8mm_D5.8mm_P5.08mm_Vertical_Fastron_HBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 12.8mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.8mm_D5.8mm_P7.62mm_Vertical_Fastron_HBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 12.8mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.8mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 12.8mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L12.8mm_D5.8mm_P25.40mm_Horizontal_Fastron_HBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 12.8mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L13.0mm_D4.5mm_P5.08mm_Vertical_Fastron_HCCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 13mm diameter 4.5mm Fastron HCCC
+0
+2
+2
+Inductor_THT
+L_Axial_L13.0mm_D4.5mm_P7.62mm_Vertical_Fastron_HCCC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 13mm diameter 4.5mm Fastron HCCC
+0
+2
+2
+Inductor_THT
+L_Axial_L13.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_HCCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 15.24mm  length 13mm diameter 4.5mm Fastron HCCC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.0mm_D4.5mm_P5.08mm_Vertical_Fastron_LACC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 14mm diameter 4.5mm Fastron LACC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.0mm_D4.5mm_P7.62mm_Vertical_Fastron_LACC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 14mm diameter 4.5mm Fastron LACC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_LACC
+Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 15.24mm  length 14mm diameter 4.5mm Fastron LACC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.5mm_D5.8mm_P5.08mm_Vertical_Fastron_HBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 14.5mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.5mm_D5.8mm_P7.62mm_Vertical_Fastron_HBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 14.5mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.5mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 14.5mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L14.5mm_D5.8mm_P25.40mm_Horizontal_Fastron_HBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 14.5mm diameter 5.8mm Fastron HBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D6.3mm_P5.08mm_Vertical_Fastron_VHBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 16mm diameter 6.3mm Fastron VHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D6.3mm_P7.62mm_Vertical_Fastron_VHBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 16mm diameter 6.3mm Fastron VHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D6.3mm_P20.32mm_Horizontal_Fastron_VHBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 16mm diameter 6.3mm Fastron VHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D6.3mm_P25.40mm_Horizontal_Fastron_VHBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 16mm diameter 6.3mm Fastron VHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D7.5mm_P5.08mm_Vertical_Fastron_XHBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 16mm diameter 7.5mm Fastron XHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D7.5mm_P7.62mm_Vertical_Fastron_XHBCC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 16mm diameter 7.5mm Fastron XHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D7.5mm_P20.32mm_Horizontal_Fastron_XHBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 16mm diameter 7.5mm Fastron XHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D7.5mm_P25.40mm_Horizontal_Fastron_XHBCC
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 16mm diameter 7.5mm Fastron XHBCC
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D9.5mm_P5.08mm_Vertical_Vishay_IM-10-37
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=16*9.5mm^2, Vishay, IM-10-37, http://www.vishay.com/docs/34030/im10.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 16mm diameter 9.5mm Vishay IM-10-37
+0
+2
+2
+Inductor_THT
+L_Axial_L16.0mm_D9.5mm_P20.32mm_Horizontal_Vishay_IM-10-37
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=16*9.5mm^2, Vishay, IM-10-37, http://www.vishay.com/docs/34030/im10.pdf
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 16mm diameter 9.5mm Vishay IM-10-37
+0
+2
+2
+Inductor_THT
+L_Axial_L17.5mm_D12.0mm_P7.62mm_Vertical_Vishay_IM-10-46
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 17.5mm diameter 12mm Vishay IM-10-46
+0
+2
+2
+Inductor_THT
+L_Axial_L17.5mm_D12.0mm_P20.32mm_Horizontal_Vishay_IM-10-46
+Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf
+Inductor Axial series Axial Horizontal pin pitch 20.32mm  length 17.5mm diameter 12mm Vishay IM-10-46
+0
+2
+2
+Inductor_THT
+L_Axial_L20.0mm_D8.0mm_P5.08mm_Vertical
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=20*8mm^2
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 20mm diameter 8mm
+0
+2
+2
+Inductor_THT
+L_Axial_L20.0mm_D8.0mm_P7.62mm_Vertical
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=20*8mm^2
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 20mm diameter 8mm
+0
+2
+2
+Inductor_THT
+L_Axial_L20.0mm_D8.0mm_P25.40mm_Horizontal
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=20*8mm^2
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 20mm diameter 8mm
+0
+2
+2
+Inductor_THT
+L_Axial_L20.3mm_D12.1mm_P7.62mm_Vertical_Vishay_IHA-101
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=20.32*12.07mm^2, Vishay, IHA-101, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 20.32mm diameter 12.07mm Vishay IHA-101
+0
+2
+2
+Inductor_THT
+L_Axial_L20.3mm_D12.1mm_P28.50mm_Horizontal_Vishay_IHA-101
+Inductor, Axial series, Axial, Horizontal, pin pitch=28.5mm, length*diameter=20.32*12.07mm^2, Vishay, IHA-101, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 28.5mm  length 20.32mm diameter 12.07mm Vishay IHA-101
+0
+2
+2
+Inductor_THT
+L_Axial_L20.3mm_D12.7mm_P7.62mm_Vertical_Vishay_IHA-201
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=20.32*12.7mm^2, Vishay, IHA-201, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 20.32mm diameter 12.7mm Vishay IHA-201
+0
+2
+2
+Inductor_THT
+L_Axial_L20.3mm_D12.7mm_P25.40mm_Horizontal_Vishay_IHA-201
+Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, length*diameter=20.32*12.7mm^2, Vishay, IHA-201, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 25.4mm  length 20.32mm diameter 12.7mm Vishay IHA-201
+0
+2
+2
+Inductor_THT
+L_Axial_L23.4mm_D12.7mm_P7.62mm_Vertical_Vishay_IHA-203
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=23.37*12.7mm^2, Vishay, IHA-203, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 23.37mm diameter 12.7mm Vishay IHA-203
+0
+2
+2
+Inductor_THT
+L_Axial_L23.4mm_D12.7mm_P32.00mm_Horizontal_Vishay_IHA-203
+Inductor, Axial series, Axial, Horizontal, pin pitch=32mm, length*diameter=23.37*12.7mm^2, Vishay, IHA-203, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 32mm  length 23.37mm diameter 12.7mm Vishay IHA-203
+0
+2
+2
+Inductor_THT
+L_Axial_L24.0mm_D7.1mm_P5.08mm_Vertical_Vishay_IM-10-28
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=24*7.1mm^2, Vishay, IM-10-28, http://www.vishay.com/docs/34035/im10.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 24mm diameter 7.1mm Vishay IM-10-28
+0
+2
+2
+Inductor_THT
+L_Axial_L24.0mm_D7.1mm_P30.48mm_Horizontal_Vishay_IM-10-28
+Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, length*diameter=24*7.1mm^2, Vishay, IM-10-28, http://www.vishay.com/docs/34035/im10.pdf
+Inductor Axial series Axial Horizontal pin pitch 30.48mm  length 24mm diameter 7.1mm Vishay IM-10-28
+0
+2
+2
+Inductor_THT
+L_Axial_L24.0mm_D7.5mm_P5.08mm_Vertical_Fastron_MESC
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 24mm diameter 7.5mm Fastron MESC
+0
+2
+2
+Inductor_THT
+L_Axial_L24.0mm_D7.5mm_P7.62mm_Vertical_Fastron_MESC
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 24mm diameter 7.5mm Fastron MESC
+0
+2
+2
+Inductor_THT
+L_Axial_L24.0mm_D7.5mm_P27.94mm_Horizontal_Fastron_MESC
+Inductor, Axial series, Axial, Horizontal, pin pitch=27.94mm, length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf
+Inductor Axial series Axial Horizontal pin pitch 27.94mm  length 24mm diameter 7.5mm Fastron MESC
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D9.0mm_P5.08mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 26mm diameter 9mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D9.0mm_P7.62mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 26mm diameter 9mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D9.0mm_P30.48mm_Horizontal_Fastron_77A
+Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Horizontal pin pitch 30.48mm  length 26mm diameter 9mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D10.0mm_P5.08mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 26mm diameter 10mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D10.0mm_P7.62mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 26mm diameter 10mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D10.0mm_P30.48mm_Horizontal_Fastron_77A
+Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Horizontal pin pitch 30.48mm  length 26mm diameter 10mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D11.0mm_P5.08mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 26mm diameter 11mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D11.0mm_P7.62mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 26mm diameter 11mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.0mm_D11.0mm_P30.48mm_Horizontal_Fastron_77A
+Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Horizontal pin pitch 30.48mm  length 26mm diameter 11mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L26.7mm_D12.1mm_P7.62mm_Vertical_Vishay_IHA-103
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=26.67*12.07mm^2, Vishay, IHA-103, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 26.67mm diameter 12.07mm Vishay IHA-103
+0
+2
+2
+Inductor_THT
+L_Axial_L26.7mm_D12.1mm_P35.00mm_Horizontal_Vishay_IHA-103
+Inductor, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=26.67*12.07mm^2, Vishay, IHA-103, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 35mm  length 26.67mm diameter 12.07mm Vishay IHA-103
+0
+2
+2
+Inductor_THT
+L_Axial_L26.7mm_D14.0mm_P7.62mm_Vertical_Vishay_IHA-104
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=26.67*13.97mm^2, Vishay, IHA-104, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 26.67mm diameter 13.97mm Vishay IHA-104
+0
+2
+2
+Inductor_THT
+L_Axial_L26.7mm_D14.0mm_P35.00mm_Horizontal_Vishay_IHA-104
+Inductor, Axial series, Axial, Horizontal, pin pitch=35mm, length*diameter=26.67*13.97mm^2, Vishay, IHA-104, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 35mm  length 26.67mm diameter 13.97mm Vishay IHA-104
+0
+2
+2
+Inductor_THT
+L_Axial_L29.9mm_D14.0mm_P7.62mm_Vertical_Vishay_IHA-105
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=29.85*13.97mm^2, Vishay, IHA-105, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 29.85mm diameter 13.97mm Vishay IHA-105
+0
+2
+2
+Inductor_THT
+L_Axial_L29.9mm_D14.0mm_P38.00mm_Horizontal_Vishay_IHA-105
+Inductor, Axial series, Axial, Horizontal, pin pitch=38mm, length*diameter=29.85*13.97mm^2, Vishay, IHA-105, http://www.vishay.com/docs/34014/iha.pdf
+Inductor Axial series Axial Horizontal pin pitch 38mm  length 29.85mm diameter 13.97mm Vishay IHA-105
+0
+2
+2
+Inductor_THT
+L_Axial_L30.0mm_D8.0mm_P5.08mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 5.08mm  length 30mm diameter 8mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L30.0mm_D8.0mm_P7.62mm_Vertical_Fastron_77A
+Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Vertical pin pitch 7.62mm  length 30mm diameter 8mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_Axial_L30.0mm_D8.0mm_P35.56mm_Horizontal_Fastron_77A
+Inductor, Axial series, Axial, Horizontal, pin pitch=35.56mm, length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf
+Inductor Axial series Axial Horizontal pin pitch 35.56mm  length 30mm diameter 8mm Fastron 77A
+0
+2
+2
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455x105NL_1
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455x155NL_1
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455x205NL_1
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455x405NL_1
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455x705NL_1
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_PulseElectronics_PH9455xxx6NL_2
+common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl
+cmode choke dual
+0
+4
+4
+Inductor_THT
+L_CommonMode_TDK_B82746S4143A040
+13A, 3Phase, Triple Coil, CM Choke, https://www.tdk-electronics.tdk.com/inf/30/ds/b82746s.pdf
+common mode filter triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82746S6702A040
+8A, 3Phase, Triple Coil, CM Choke, https://www.tdk-electronics.tdk.com/inf/30/ds/b82746s.pdf
+common mode filter triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82747E6163A040
+16A, 3Phase, Triple Coil, CM Choke, drill hole 2mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf )
+three phase common mode triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82747E6203A040
+20A, 3Phase, Triple Coil, CM Choke, drill hole 2.2mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf )
+three phase common mode triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82747E6253A040
+25A, 3Phase, Triple Coil, CM Choke, drill hole 2.44mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf )
+three phase common mode triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82747E6353A040
+35A, 3Phase, Triple Coil, CM Choke, drill hole 3mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf )
+three phase common mode triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_TDK_B82767S4123N030
+12A, 3Phase N, Quadruple Coil, https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf
+common mode filter quadruple choke
+0
+8
+8
+Inductor_THT
+L_CommonMode_TDK_B82767S4193N030
+19A, 3Phase N, Quadruple Coil, https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf
+common mode filter quadruple choke
+0
+8
+8
+Inductor_THT
+L_CommonMode_TDK_B82767S4263N030
+26A , 3Phase N, Quadruple Coil,  https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf
+common mode filter quadruple choke
+0
+8
+8
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L19.3mm_W10.8mm_Px6.35mm_Py15.24mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=6.35*15.24mm^2, length*width=19.304*10.795mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 6.35*15.24mm^2  length 19.304mm width 10.795mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L21.0mm_W10.0mm_Px5.08mm_Py12.70mm_Murata_5100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=5.08*12.70mm^2, length*width=21*10mm^2, Murata, 5100, http://www.murata-ps.com/data/magnetics/kmp_5100.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 5.08*12.70mm^2  length 21mm width 10mm Murata 5100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L24.0mm_W16.3mm_Px10.16mm_Py20.32mm_Murata_5200
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=10.16*20.32mm^2, length*width=24*16.3mm^2, Murata, 5200, http://www.murata-ps.com/data/magnetics/kmp_5200.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 10.16*20.32mm^2  length 24mm width 16.3mm Murata 5200
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L30.5mm_W15.2mm_Px10.16mm_Py20.32mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=10.16*20.32mm^2, length*width=30.479999999999997*15.239999999999998mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 10.16*20.32mm^2  length 30.479999999999997mm width 15.239999999999998mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L34.3mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, length*width=34.29*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2  length 34.29mm width 20.32mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L36.8mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, length*width=36.83*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2  length 36.83mm width 20.32mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L38.1mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, length*width=38.099999999999994*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2  length 38.099999999999994mm width 20.32mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L39.4mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, length*width=39.37*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2  length 39.37mm width 20.32mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L41.9mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, length*width=41.91*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2  length 41.91mm width 20.32mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_Toroid_Vertical_L43.2mm_W22.9mm_Px17.78mm_Py30.48mm_Bourns_8100
+L_CommonMode_Toroid, Vertical series, Radial, pin pitch=17.78*30.48mm^2, length*width=43.18*22.86mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf
+L_CommonMode_Toroid Vertical series Radial pin pitch 17.78*30.48mm^2  length 43.18mm width 22.86mm Bourns 8100
+0
+4
+4
+Inductor_THT
+L_CommonMode_VAC_T60405-S6123-X140
+40A, 3Phase, Triple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X140.pdf
+common mode filter
+0
+6
+6
+Inductor_THT
+L_CommonMode_VAC_T60405-S6123-X240
+40A, 3Phase, Triple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X240.pdf
+common mode filter triple choke
+0
+6
+6
+Inductor_THT
+L_CommonMode_VAC_T60405-S6123-X402
+30A, 3Phase N, Quadruple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X402.pdf
+common mode filter quadruple choke
+0
+8
+8
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-L
+Wuerth, WE-CMB, Bauform L,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-M
+Wuerth, WE-CMB, Bauform M,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-S
+Wuerth, WE-CMB, Bauform S,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-XL
+Wuerth, WE-CMB, Bauform XL,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-XS
+Wuerth, WE-CMB, Bauform XS,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_CommonMode_Wuerth_WE-CMB-XXL
+Wuerth, WE-CMB, Bauform XXL,
+CommonModeChoke Gleichtaktdrossel 
+0
+4
+4
+Inductor_THT
+L_Mount_Lodestone_VTM120
+Lodestone Pacific, 30.48mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf
+vertical inductor toroid mount
+0
+4
+4
+Inductor_THT
+L_Mount_Lodestone_VTM160
+Lodestone Pacific, 40.64mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf
+vertical inductor toroid mount
+0
+4
+4
+Inductor_THT
+L_Mount_Lodestone_VTM254
+Lodestone Pacific, 64.51mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf
+vertical inductor toroid mount
+0
+4
+4
+Inductor_THT
+L_Mount_Lodestone_VTM280
+Lodestone Pacific, 71.12mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf
+vertical inductor toroid mount
+0
+4
+4
+Inductor_THT
+L_Mount_Lodestone_VTM950-6
+Lodestone Pacific, vertical toroid mount, 11x19mm, 6 pins, https://www.lodestonepacific.com/wp-content/uploads/2021/05/VTM950-6.pdf
+vertical inductor toroid mount
+0
+6
+6
+Inductor_THT
+L_Radial_D6.0mm_P4.00mm
+Inductor, Radial series, Radial, pin pitch=4.00mm, diameter=6.0mm, height=4.6mm, http://www.abracon.com/Magnetics/radial/AIUR-07.pdf
+Inductor Radial series Radial pin pitch 4.00mm  diameter 6.0mm height 4.6mm
+0
+2
+2
+Inductor_THT
+L_Radial_D7.0mm_P3.00mm
+Inductor, Radial series, Radial, pin pitch=3.00mm, diameter=7mm, height=9.5mm, http://www.abracon.com/Magnetics/radial/AIUR-16.pdf
+Inductor Radial series Radial pin pitch 3.00mm  diameter 7mm height 9.5mm
+0
+2
+2
+Inductor_THT
+L_Radial_D7.2mm_P3.00mm_Murata_1700
+Inductor, Radial series, Radial, pin pitch=3.00mm, diameter=7.2mm, height=8.5mm, Murata, 1700, http://www.murata-ps.com/data/magnetics/kmp_1700.pdf
+Inductor Radial series Radial pin pitch 3.00mm  diameter 7.2mm height 8.5mm Murata 1700
+0
+2
+2
+Inductor_THT
+L_Radial_D7.5mm_P3.50mm_Fastron_07P
+Inductor, Radial series, Radial, pin pitch=3.50mm, diameter=7.5mm, height=12.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/39/07P.pdf?type=Complete-DataSheet&productType=series
+Inductor Radial series Radial pin pitch 3.50mm  diameter 7.5mm height 12.5mm Fastron 07P
+0
+2
+2
+Inductor_THT
+L_Radial_D7.5mm_P5.00mm_Fastron_07P
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=7.5mm, height=12.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/39/07P.pdf?type=Complete-DataSheet&productType=series
+Inductor Radial series Radial pin pitch 5.00mm  diameter 7.5mm height 12.5mm Fastron 07P
+0
+2
+2
+Inductor_THT
+L_Radial_D7.8mm_P5.00mm_Fastron_07HCP
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=7.8mm, height=7.5mm, Fastron, 07HCP, http://www.abracon.com/Magnetics/radial/AISR875.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 7.8mm height 7.5mm Fastron 07HCP
+0
+2
+2
+Inductor_THT
+L_Radial_D8.7mm_P5.00mm_Fastron_07HCP
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=8.7mm, height=10mm, Fastron, 07HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_07HCP.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 8.7mm height 10mm Fastron 07HCP
+0
+2
+2
+Inductor_THT
+L_Radial_D9.5mm_P5.00mm_Fastron_07HVP
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=9.5mm, height=10mm, Fastron, 07HVP, http://www.fastrongroup.com/image-show/107/07HVP%2007HVP_T.pdf?type=Complete-DataSheet&productType=series
+Inductor Radial series Radial pin pitch 5.00mm  diameter 9.5mm height 10mm Fastron 07HVP
+0
+2
+2
+Inductor_THT
+L_Radial_D10.0mm_P5.00mm_Fastron_07M
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=12.7mm, Fastron, 07M, http://www.fastrongroup.com/image-show/37/07M.pdf?type=Complete-DataSheet&productType=series
+Inductor Radial series Radial pin pitch 5.00mm  diameter 10mm height 12.7mm Fastron 07M
+0
+2
+2
+Inductor_THT
+L_Radial_D10.0mm_P5.00mm_Fastron_07P
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=12.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/37/07M.pdf?type=Complete-DataSheet&productType=series
+Inductor Radial series Radial pin pitch 5.00mm  diameter 10mm height 12.5mm Fastron 07P
+0
+2
+2
+Inductor_THT
+L_Radial_D10.0mm_P5.00mm_Neosid_SD12_style3
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=10.0mm, height=19.5mm, Neosid, SD12, style3, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 10.0mm height 19.5mm Neosid SD12 style3
+0
+2
+2
+Inductor_THT
+L_Radial_D10.0mm_P5.00mm_Neosid_SD12k_style3
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=10.0mm, height=12.5mm, Neosid, SD12k, style3, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 10.0mm height 12.5mm Neosid SD12k style3
+0
+2
+2
+Inductor_THT
+L_Radial_D10.5mm_P4.00x5.00mm_Murata_1200RS
+Inductor, Radial, Pitch=4.00x5.00mm, Diameter=10.5mm, Murata 1200RS, http://www.murata-ps.com/data/magnetics/kmp_1200rs.pdf
+Inductor Radial Murata 1200RS
+0
+4
+2
+Inductor_THT
+L_Radial_D10.5mm_P5.00mm_Abacron_AISR-01
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=10.5mm, height=10.5mm, Abacron, AISR-01, http://www.abracon.com/Magnetics/radial/AISR-01.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 10.5mm height 10.5mm Abacron AISR-01
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P5.00mm_Fastron_11P
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=12.0mm, height=16mm, Fastron, 11P, http://cdn-reichelt.de/documents/datenblatt/B400/DS_11P.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 12.0mm height 16mm Fastron 11P
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P5.00mm_Neosid_SD12_style2
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=12.0mm, height=20mm, Neosid, SD12, style2, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 12.0mm height 20mm Neosid SD12 style2
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P5.00mm_Neosid_SD12k_style2
+Inductor, Radial series, Radial, pin pitch=5.00mm, diameter=12.0mm, height=13mm, Neosid, SD12k, style2, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf
+Inductor Radial series Radial pin pitch 5.00mm  diameter 12.0mm height 13mm Neosid SD12k style2
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P6.00mm_Murata_1900R
+Inductor, Radial series, Radial, pin pitch=6.00mm, diameter=12.0mm, height=21mm, Murata, 1900R, http://www.murata-ps.com/data/magnetics/kmp_1900r.pdf
+Inductor Radial series Radial pin pitch 6.00mm  diameter 12.0mm height 21mm Murata 1900R
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P10.00mm_Neosid_SD12_style1
+Inductor, Radial series, Radial, pin pitch=10.00mm, diameter=12.0mm, height=20mm, Neosid, SD12, style1, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf
+Inductor Radial series Radial pin pitch 10.00mm  diameter 12.0mm height 20mm Neosid SD12 style1
+0
+2
+2
+Inductor_THT
+L_Radial_D12.0mm_P10.00mm_Neosid_SD12k_style1
+Inductor, Radial series, Radial, pin pitch=10.00mm, diameter=12.0mm, height=13mm, Neosid, SD12k, style1, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf
+Inductor Radial series Radial pin pitch 10.00mm  diameter 12.0mm height 13mm Neosid SD12k style1
+0
+2
+2
+Inductor_THT
+L_Radial_D12.5mm_P7.00mm_Fastron_09HCP
+Inductor, Radial series, Radial, pin pitch=7.00mm, diameter=12.5mm, height=10.8mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf
+Inductor Radial series Radial pin pitch 7.00mm  diameter 12.5mm height 10.8mm Fastron 09HCP
+0
+2
+2
+Inductor_THT
+L_Radial_D12.5mm_P9.00mm_Fastron_09HCP
+Inductor, Radial series, Radial, pin pitch=9.00mm, diameter=12.5mm, height=10.8mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf
+Inductor Radial series Radial pin pitch 9.00mm  diameter 12.5mm height 10.8mm Fastron 09HCP
+0
+2
+2
+Inductor_THT
+L_Radial_D13.5mm_P7.00mm_Fastron_09HCP
+Inductor, Radial series, Radial, pin pitch=7.00mm, diameter=13.5mm, height=10.8mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf
+Inductor Radial series Radial pin pitch 7.00mm  diameter 13.5mm height 10.8mm Fastron 09HCP
+0
+2
+2
+Inductor_THT
+L_Radial_D14.2mm_P10.00mm_Neosid_SD14
+Inductor, Radial series, Radial, pin pitch=10.00mm, diameter=14.2mm, height=24.5mm, Neosid, SD14, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd14.pdf
+Inductor Radial series Radial pin pitch 10.00mm  diameter 14.2mm height 24.5mm Neosid SD14
+0
+2
+2
+Inductor_THT
+L_Radial_D16.0mm_P10.00mm_Panasonic_15E-L
+Panasonic ELC Type 15E-L inductor, radial, shielded, pin pitch=10.00mm, diameter=16.0mm, https://mediap.industry.panasonic.eu/assets/imported/industrial.panasonic.com/cdbs/www-data/pdf/AGB0000/AGB0000CE10.pdf
+ELC15ExxxL
+0
+3
+3
+Inductor_THT
+L_Radial_D16.8mm_P11.43mm_Vishay_IHB-1
+Inductor, Radial series, Radial, pin pitch=11.43mm, diameter=16.8mm, height=21.34mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 11.43mm  diameter 16.8mm height 21.34mm Vishay IHB-1
+0
+2
+2
+Inductor_THT
+L_Radial_D16.8mm_P12.07mm_Vishay_IHB-1
+Inductor, Radial series, Radial, pin pitch=12.07mm, diameter=16.8mm, height=21.34mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 12.07mm  diameter 16.8mm height 21.34mm Vishay IHB-1
+0
+2
+2
+Inductor_THT
+L_Radial_D16.8mm_P12.70mm_Vishay_IHB-1
+Inductor, Radial series, Radial, pin pitch=12.70mm, diameter=16.8mm, height=21.34mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 12.70mm  diameter 16.8mm height 21.34mm Vishay IHB-1
+0
+2
+2
+Inductor_THT
+L_Radial_D18.0mm_P10.00mm
+Inductor, Radial series, Radial, pin pitch=10.00mm, diameter=18mm, height=27.0mm, http://www.abracon.com/Magnetics/radial/AIUR-15.pdf
+Inductor Radial series Radial pin pitch 10.00mm  diameter 18mm height 27.0mm
+0
+2
+2
+Inductor_THT
+L_Radial_D21.0mm_P14.61mm_Vishay_IHB-2
+Inductor, Radial series, Radial, pin pitch=14.61mm, diameter=21mm, height=21.34mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 14.61mm  diameter 21mm height 21.34mm Vishay IHB-2
+0
+2
+2
+Inductor_THT
+L_Radial_D21.0mm_P15.00mm_Vishay_IHB-2
+Inductor, Radial series, Radial, pin pitch=15.00mm, diameter=21mm, height=21.34mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 15.00mm  diameter 21mm height 21.34mm Vishay IHB-2
+0
+2
+2
+Inductor_THT
+L_Radial_D21.0mm_P15.24mm_Vishay_IHB-2
+Inductor, Radial series, Radial, pin pitch=15.24mm, diameter=21mm, height=21.34mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 15.24mm  diameter 21mm height 21.34mm Vishay IHB-2
+0
+2
+2
+Inductor_THT
+L_Radial_D21.0mm_P15.75mm_Vishay_IHB-2
+Inductor, Radial series, Radial, pin pitch=15.75mm, diameter=21mm, height=21.34mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 15.75mm  diameter 21mm height 21.34mm Vishay IHB-2
+0
+2
+2
+Inductor_THT
+L_Radial_D21.0mm_P19.00mm
+Inductor, Radial series, Radial, pin pitch=19.00mm, diameter=21mm, height=21mm, http://www.abracon.com/Magnetics/radial/AIRD02.pdf
+Inductor Radial series Radial pin pitch 19.00mm  diameter 21mm height 21mm
+0
+2
+2
+Inductor_THT
+L_Radial_D24.0mm_P24.00mm
+Inductor, Radial series, Radial, pin pitch=24.00mm, diameter=24mm, height=24mm
+Inductor Radial series Radial pin pitch 24.00mm  diameter 24mm height 24mm
+0
+2
+2
+Inductor_THT
+L_Radial_D24.4mm_P22.90mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=22.90mm, diameter=24.4mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 22.90mm  diameter 24.4mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D24.4mm_P23.10mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=23.10mm, diameter=24.4mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 23.10mm  diameter 24.4mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D24.4mm_P23.40mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=23.40mm, diameter=24.4mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 23.40mm  diameter 24.4mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D24.4mm_P23.70mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=23.70mm, diameter=24.4mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 23.70mm  diameter 24.4mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D24.4mm_P23.90mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=23.90mm, diameter=24.4mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 23.90mm  diameter 24.4mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D27.9mm_P18.29mm_Vishay_IHB-3
+Inductor, Radial series, Radial, pin pitch=18.29mm, diameter=27.9mm, height=21.34mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 18.29mm  diameter 27.9mm height 21.34mm Vishay IHB-3
+0
+2
+2
+Inductor_THT
+L_Radial_D27.9mm_P19.05mm_Vishay_IHB-3
+Inductor, Radial series, Radial, pin pitch=19.05mm, diameter=27.9mm, height=21.34mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 19.05mm  diameter 27.9mm height 21.34mm Vishay IHB-3
+0
+2
+2
+Inductor_THT
+L_Radial_D27.9mm_P20.07mm_Vishay_IHB-3
+Inductor, Radial series, Radial, pin pitch=20.07mm, diameter=27.9mm, height=21.34mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 20.07mm  diameter 27.9mm height 21.34mm Vishay IHB-3
+0
+2
+2
+Inductor_THT
+L_Radial_D28.0mm_P29.20mm
+Inductor, Radial series, Radial, pin pitch=29.20mm, diameter=28mm, height=28mm
+Inductor Radial series Radial pin pitch 29.20mm  diameter 28mm height 28mm
+0
+2
+2
+Inductor_THT
+L_Radial_D29.8mm_P28.30mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=28.30mm, diameter=29.8mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 28.30mm  diameter 29.8mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D29.8mm_P28.50mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=28.50mm, diameter=29.8mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 28.50mm  diameter 29.8mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D29.8mm_P28.80mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=28.80mm, diameter=29.8mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 28.80mm  diameter 29.8mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D29.8mm_P29.00mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=29.00mm, diameter=29.8mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 29.00mm  diameter 29.8mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D29.8mm_P29.30mm_Murata_1400series
+Inductor, Radial series, Radial, pin pitch=29.30mm, diameter=29.8mm, height=10.5mm, Murata, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf
+Inductor Radial series Radial pin pitch 29.30mm  diameter 29.8mm height 10.5mm Murata 1400series
+0
+2
+2
+Inductor_THT
+L_Radial_D40.6mm_P26.16mm_Vishay_IHB-5
+Inductor, Radial series, Radial, pin pitch=26.16mm, diameter=40.64mm, height=36.83mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 26.16mm  diameter 40.64mm height 36.83mm Vishay IHB-5
+0
+2
+2
+Inductor_THT
+L_Radial_D40.6mm_P27.18mm_Vishay_IHB-4
+Inductor, Radial series, Radial, pin pitch=27.18mm, diameter=40.64mm, height=26.16mm, Vishay, IHB-4, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 27.18mm  diameter 40.64mm height 26.16mm Vishay IHB-4
+0
+2
+2
+Inductor_THT
+L_Radial_D40.6mm_P27.94mm_Vishay_IHB-4
+Inductor, Radial series, Radial, pin pitch=27.94mm, diameter=40.64mm, height=26.16mm, Vishay, IHB-4, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 27.94mm  diameter 40.64mm height 26.16mm Vishay IHB-4
+0
+2
+2
+Inductor_THT
+L_Radial_D40.6mm_P27.94mm_Vishay_IHB-5
+Inductor, Radial series, Radial, pin pitch=27.94mm, diameter=40.64mm, height=36.83mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 27.94mm  diameter 40.64mm height 36.83mm Vishay IHB-5
+0
+2
+2
+Inductor_THT
+L_Radial_D40.6mm_P28.70mm_Vishay_IHB-5
+Inductor, Radial series, Radial, pin pitch=28.70mm, diameter=40.64mm, height=36.83mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 28.70mm  diameter 40.64mm height 36.83mm Vishay IHB-5
+0
+2
+2
+Inductor_THT
+L_Radial_D50.8mm_P33.27mm_Vishay_IHB-6
+Inductor, Radial series, Radial, pin pitch=33.27mm, diameter=50.8mm, height=38.1mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 33.27mm  diameter 50.8mm height 38.1mm Vishay IHB-6
+0
+2
+2
+Inductor_THT
+L_Radial_D50.8mm_P34.29mm_Vishay_IHB-6
+Inductor, Radial series, Radial, pin pitch=34.29mm, diameter=50.8mm, height=38.1mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 34.29mm  diameter 50.8mm height 38.1mm Vishay IHB-6
+0
+2
+2
+Inductor_THT
+L_Radial_D50.8mm_P35.81mm_Vishay_IHB-6
+Inductor, Radial series, Radial, pin pitch=35.81mm, diameter=50.8mm, height=38.1mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 35.81mm  diameter 50.8mm height 38.1mm Vishay IHB-6
+0
+2
+2
+Inductor_THT
+L_Radial_D50.8mm_P36.32mm_Vishay_IHB-6
+Inductor, Radial series, Radial, pin pitch=36.32mm, diameter=50.8mm, height=38.1mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 36.32mm  diameter 50.8mm height 38.1mm Vishay IHB-6
+0
+2
+2
+Inductor_THT
+L_Radial_D50.8mm_P38.86mm_Vishay_IHB-6
+Inductor, Radial series, Radial, pin pitch=38.86mm, diameter=50.8mm, height=38.1mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf
+Inductor Radial series Radial pin pitch 38.86mm  diameter 50.8mm height 38.1mm Vishay IHB-6
+0
+2
+2
+Inductor_THT
+L_Radial_L7.5mm_W4.6mm_P5.00mm_Neosid_SD75
+Inductor, Radial series, Radial, pin pitch=5.00mm, length*width=7.5*4.6mm^2, Neosid, SD75, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd75.pdf
+Inductor Radial series Radial pin pitch 5.00mm  length 7.5mm width 4.6mm Neosid SD75
+0
+2
+2
+Inductor_THT
+L_Radial_L8.0mm_W8.0mm_P5.00mm_Neosid_NE-CPB-07E
+Inductor, Radial series, Radial, pin pitch=5.00mm, length*width=8*8mm^2, Neosid, NE-CPB-07E, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB07E.pdf
+Inductor Radial series Radial pin pitch 5.00mm  length 8mm width 8mm Neosid NE-CPB-07E
+0
+2
+2
+Inductor_THT
+L_Radial_L8.0mm_W8.0mm_P5.00mm_Neosid_SD8
+Inductor, Radial series, Radial, pin pitch=5.00mm, length*width=8*8mm^2, Neosid, SD8, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd8.pdf
+Inductor Radial series Radial pin pitch 5.00mm  length 8mm width 8mm Neosid SD8
+0
+2
+2
+Inductor_THT
+L_Radial_L9.1mm_W9.1mm_Px6.35mm_Py6.35mm_Pulse_LP-25
+Inductor, Radial series, Radial, pin pitch=6.35*6.35mm^2, length*width=9.14*9.14mm^2, Pulse, LP-25, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf
+Inductor Radial series Radial pin pitch 6.35*6.35mm^2  length 9.14mm width 9.14mm Pulse LP-25
+0
+2
+2
+Inductor_THT
+L_Radial_L10.2mm_W10.2mm_Px7.62mm_Py7.62mm_Pulse_LP-30
+Inductor, Radial series, Radial, pin pitch=7.62*7.62mm^2, length*width=10.16*10.16mm^2, Pulse, LP-30, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf
+Inductor Radial series Radial pin pitch 7.62*7.62mm^2  length 10.16mm width 10.16mm Pulse LP-30
+0
+2
+2
+Inductor_THT
+L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.3mm
+Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.3mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf
+Inductor Radial series Radial pin pitch 6.00*6.00mm^2  length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.3mm
+0
+2
+2
+Inductor_THT
+L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.5mm
+Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.5mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf
+Inductor Radial series Radial pin pitch 6.00*6.00mm^2  length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.5mm
+0
+2
+2
+Inductor_THT
+L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.7mm
+Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.7mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf
+Inductor Radial series Radial pin pitch 6.00*6.00mm^2  length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.7mm
+0
+2
+2
+Inductor_THT
+L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.8mm
+Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.8mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf
+Inductor Radial series Radial pin pitch 6.00*6.00mm^2  length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.8mm
+0
+2
+2
+Inductor_THT
+L_Radial_L12.6mm_W12.6mm_Px9.52mm_Py9.52mm_Pulse_LP-37
+Inductor, Radial series, Radial, pin pitch=9.52*9.52mm^2, length*width=12.57*12.57mm^2, Pulse, LP-37, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf
+Inductor Radial series Radial pin pitch 9.52*9.52mm^2  length 12.57mm width 12.57mm Pulse LP-37
+0
+2
+2
+Inductor_THT
+L_Radial_L16.1mm_W16.1mm_Px7.62mm_Py12.70mm_Pulse_LP-44
+Inductor, Radial series, Radial, pin pitch=7.62*12.70mm^2, length*width=16.13*16.13mm^2, Pulse, LP-44, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf
+Inductor Radial series Radial pin pitch 7.62*12.70mm^2  length 16.13mm width 16.13mm Pulse LP-44
+0
+2
+2
+Inductor_THT
+L_SELF1408
+Self Ferrite 14 - 08
+SELF
+0
+7
+3
+Inductor_THT
+L_SELF1418
+Self Ferrite 14 - 18
+SELF
+0
+10
+4
+Inductor_THT
+L_Toroid_Horizontal_D3.2mm_P6.40mm_Diameter3-5mm_Amidon-T12
+L_Toroid, Horizontal series, Radial, pin pitch=6.40mm, diameter=3.175mm, height=4mm, Diameter3-5mm, Amidon-T12
+L_Toroid Horizontal series Radial pin pitch 6.40mm  diameter 3.175mm height 4mm Diameter3-5mm Amidon-T12
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D4.1mm_P8.00mm_Diameter4-5mm_Amidon-T16
+L_Toroid, Horizontal series, Radial, pin pitch=8.00mm, diameter=4.064mm, height=4mm, Diameter4-5mm, Amidon-T16
+L_Toroid Horizontal series Radial pin pitch 8.00mm  diameter 4.064mm height 4mm Diameter4-5mm Amidon-T16
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D5.1mm_P9.00mm_Diameter6-5mm_Amidon-T20
+L_Toroid, Horizontal series, Radial, pin pitch=9.00mm, diameter=5.08mm, height=4.5mm, Diameter6-5mm, Amidon-T20
+L_Toroid Horizontal series Radial pin pitch 9.00mm  diameter 5.08mm height 4.5mm Diameter6-5mm Amidon-T20
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25
+L_Toroid, Horizontal series, Radial, pin pitch=10.00mm, diameter=6.476999999999999mm, height=5mm, Diameter7-5mm, Amidon-T25
+L_Toroid Horizontal series Radial pin pitch 10.00mm  diameter 6.476999999999999mm height 5mm Diameter7-5mm Amidon-T25
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30
+L_Toroid, Horizontal series, Radial, pin pitch=13.00mm, diameter=7.7978mm, height=5.5mm, Diameter9-5mm, Amidon-T30
+L_Toroid Horizontal series Radial pin pitch 13.00mm  diameter 7.7978mm height 5.5mm Diameter9-5mm Amidon-T30
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D9.5mm_P15.00mm_Diameter10-5mm_Amidon-T37
+L_Toroid, Horizontal series, Radial, pin pitch=15.00mm, diameter=9.524999999999999mm, height=6mm, Diameter10-5mm, Amidon-T37
+L_Toroid Horizontal series Radial pin pitch 15.00mm  diameter 9.524999999999999mm height 6mm Diameter10-5mm Amidon-T37
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D11.2mm_P17.00mm_Diameter12-5mm_Amidon-T44
+L_Toroid, Horizontal series, Radial, pin pitch=17.00mm, diameter=11.176mm, height=6.5mm, Diameter12-5mm, Amidon-T44
+L_Toroid Horizontal series Radial pin pitch 17.00mm  diameter 11.176mm height 6.5mm Diameter12-5mm Amidon-T44
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D12.7mm_P20.00mm_Diameter14-5mm_Amidon-T50
+L_Toroid, Horizontal series, Radial, pin pitch=20.00mm, diameter=12.7mm, height=7mm, Diameter14-5mm, Amidon-T50
+L_Toroid Horizontal series Radial pin pitch 20.00mm  diameter 12.7mm height 7mm Diameter14-5mm Amidon-T50
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D16.8mm_P14.70mm_Vishay_TJ3
+L_Toroid, Horizontal series, Radial, pin pitch=14.70mm, diameter=16.8mm, height=8.2mm, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 14.70mm  diameter 16.8mm height 8.2mm Vishay TJ3
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D16.8mm_P14.70mm_Vishay_TJ3_BigPads
+L_Toroid, Horizontal series, Radial, pin pitch=14.70mm, diameter=16.8mm, height=8.2mm, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 14.70mm  diameter 16.8mm height 8.2mm Vishay TJ3
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D17.3mm_P15.24mm_Bourns_2000
+L_Toroid, Horizontal series, Radial, pin pitch=15.24mm, diameter=17.3mm, height=10.4mm, Bourns, 2000, http://www.bourns.com/docs/Product-Datasheets/2000_series.pdf?sfvrsn=5
+L_Toroid Horizontal series Radial pin pitch 15.24mm  diameter 17.3mm height 10.4mm Bourns 2000
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D21.8mm_P19.10mm_Bourns_2100
+L_Toroid, Horizontal series, Radial, pin pitch=19.10mm, diameter=21.8mm, height=11.4mm, Bourns, 2100, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 19.10mm  diameter 21.8mm height 11.4mm Bourns 2100
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D21.8mm_P19.60mm_Bourns_2100
+L_Toroid, Horizontal series, Radial, pin pitch=19.60mm, diameter=21.8mm, height=10.4mm, Bourns, 2100, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 19.60mm  diameter 21.8mm height 10.4mm Bourns 2100
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D22.4mm_P19.80mm_Vishay_TJ4
+L_Toroid, Horizontal series, Radial, pin pitch=19.80mm, diameter=22.4mm, height=10.2mm, Vishay, TJ4, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 19.80mm  diameter 22.4mm height 10.2mm Vishay TJ4
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D24.1mm_P21.80mm_Bourns_2200
+L_Toroid, Horizontal series, Radial, pin pitch=21.80mm, diameter=24.1mm, height=14mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 21.80mm  diameter 24.1mm height 14mm Bourns 2200
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D24.1mm_P23.10mm_Bourns_2200
+L_Toroid, Horizontal series, Radial, pin pitch=23.10mm, diameter=24.1mm, height=14mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 23.10mm  diameter 24.1mm height 14mm Bourns 2200
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D25.4mm_P22.90mm_Vishay_TJ5
+L_Toroid, Horizontal series, Radial, pin pitch=22.90mm, diameter=25.4mm, height=11.4mm, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 22.90mm  diameter 25.4mm height 11.4mm Vishay TJ5
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D25.4mm_P22.90mm_Vishay_TJ5_BigPads
+L_Toroid, Horizontal series, Radial, pin pitch=22.90mm, diameter=25.4mm, height=11.4mm, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 22.90mm  diameter 25.4mm height 11.4mm Vishay TJ5
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D26.0mm_P5.08mm
+inductor 26mm diameter toroid
+SELF INDUCTOR
+0
+3
+2
+Inductor_THT
+L_Toroid_Horizontal_D28.0mm_P25.10mm_Bourns_2200
+L_Toroid, Horizontal series, Radial, pin pitch=25.10mm, diameter=28mm, height=14mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 25.10mm  diameter 28mm height 14mm Bourns 2200
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D28.0mm_P26.67mm_Bourns_2200
+L_Toroid, Horizontal series, Radial, pin pitch=26.67mm, diameter=28mm, height=14mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 26.67mm  diameter 28mm height 14mm Bourns 2200
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D32.5mm_P28.90mm_Bourns_2300
+L_Toroid, Horizontal series, Radial, pin pitch=28.90mm, diameter=32.5mm, height=16.5mm, Bourns, 2300, http://www.bourns.com/docs/Product-Datasheets/2300_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 28.90mm  diameter 32.5mm height 16.5mm Bourns 2300
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D32.5mm_P30.00mm_Bourns_2300
+L_Toroid, Horizontal series, Radial, pin pitch=30.00mm, diameter=32.5mm, height=16.5mm, Bourns, 2300, http://www.bourns.com/docs/Product-Datasheets/2300_series.pdf?sfvrsn=3
+L_Toroid Horizontal series Radial pin pitch 30.00mm  diameter 32.5mm height 16.5mm Bourns 2300
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D35.1mm_P31.00mm_Vishay_TJ6
+L_Toroid, Horizontal series, Radial, pin pitch=31.00mm, diameter=35.1mm, height=21.1mm, Vishay, TJ6, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 31.00mm  diameter 35.1mm height 21.1mm Vishay TJ6
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D40.0mm_P48.26mm
+L_Toroid, Horizontal series, Radial, pin pitch=48.26mm, diameter=40mm, height=4mm
+L_Toroid Horizontal series Radial pin pitch 48.26mm  diameter 40mm height 4mm
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D41.9mm_P37.60mm_Vishay_TJ7
+L_Toroid, Horizontal series, Radial, pin pitch=37.60mm, diameter=41.9mm, height=19.1mm, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 37.60mm  diameter 41.9mm height 19.1mm Vishay TJ7
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D49.3mm_P44.60mm_Vishay_TJ8
+L_Toroid, Horizontal series, Radial, pin pitch=44.60mm, diameter=49.3mm, height=25.4mm, Vishay, TJ8, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 44.60mm  diameter 49.3mm height 25.4mm Vishay TJ8
+0
+2
+2
+Inductor_THT
+L_Toroid_Horizontal_D69.1mm_P63.20mm_Vishay_TJ9
+L_Toroid, Horizontal series, Radial, pin pitch=63.20mm, diameter=69.1mm, height=36.1mm, Vishay, TJ9, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Horizontal series Radial pin pitch 63.20mm  diameter 69.1mm height 36.1mm Vishay TJ9
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L10.0mm_W5.0mm_P5.08mm
+L_Toroid, Vertical series, Radial, pin pitch=5.08mm, length*width=10*5mm^2
+L_Toroid Vertical series Radial pin pitch 5.08mm  length 10mm width 5mm
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L13.0mm_W6.5mm_P5.60mm
+L_Toroid, Vertical series, Radial, pin pitch=5.60mm, length*width=13*6.5mm^2
+L_Toroid Vertical series Radial pin pitch 5.60mm  length 13mm width 6.5mm
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L14.0mm_W5.6mm_P5.30mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=5.30mm, length*width=14*5.6mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 5.30mm  length 14mm width 5.6mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L14.0mm_W6.3mm_P4.57mm_Pulse_A
+L_Toroid, Vertical series, Radial, pin pitch=4.57mm, length*width=13.97*6.35mm^2, Pulse, A, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 4.57mm  length 13.97mm width 6.35mm Pulse A
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L14.7mm_W8.6mm_P5.58mm_Pulse_KM-1
+L_Toroid, Vertical series, Radial, pin pitch=5.58mm, length*width=14.73*8.64mm^2, Pulse, KM-1, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 5.58mm  length 14.73mm width 8.64mm Pulse KM-1
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm
+L_Toroid, Vertical series, Radial, pin pitch=7.62mm, length*width=16*8mm^2
+L_Toroid Vertical series Radial pin pitch 7.62mm  length 16mm width 8mm
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.3mm_W7.1mm_P7.11mm_Pulse_H
+L_Toroid, Vertical series, Radial, pin pitch=7.11mm, length*width=16.26*7.11mm^2, Pulse, H, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 7.11mm  length 16.26mm width 7.11mm Pulse H
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.4mm_W7.6mm_P6.60mm_Vishay_TJ3
+L_Toroid, Vertical series, Radial, pin pitch=6.60mm, length*width=16.4*7.6mm^2, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 6.60mm  length 16.4mm width 7.6mm Vishay TJ3
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.5mm_W11.4mm_P7.62mm_Pulse_KM-2
+L_Toroid, Vertical series, Radial, pin pitch=7.62mm, length*width=16.51*11.43mm^2, Pulse, KM-2, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 7.62mm  length 16.51mm width 11.43mm Pulse KM-2
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.8mm_W9.2mm_P7.10mm_Vishay_TJ3
+L_Toroid, Vertical series, Radial, pin pitch=7.10mm, length*width=16.8*9.2mm^2, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 7.10mm  length 16.8mm width 9.2mm Vishay TJ3
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L16.8mm_W9.2mm_P7.10mm_Vishay_TJ3_BigPads
+L_Toroid, Vertical series, Radial, pin pitch=7.10mm, length*width=16.8*9.2mm^2, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 7.10mm  length 16.8mm width 9.2mm Vishay TJ3
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L17.8mm_W8.1mm_P7.62mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=7.62mm, length*width=17.8*8.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 7.62mm  length 17.8mm width 8.1mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L17.8mm_W9.7mm_P7.11mm_Pulse_B
+L_Toroid, Vertical series, Radial, pin pitch=7.11mm, length*width=17.78*9.65mm^2, Pulse, B, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 7.11mm  length 17.78mm width 9.65mm Pulse B
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L19.1mm_W8.1mm_P7.10mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=7.10mm, length*width=19.1*8.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 7.10mm  length 19.1mm width 8.1mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L21.6mm_W8.4mm_P8.38mm_Pulse_G
+L_Toroid, Vertical series, Radial, pin pitch=8.38mm, length*width=21.59*8.38mm^2, Pulse, G, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 8.38mm  length 21.59mm width 8.38mm Pulse G
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L21.6mm_W9.1mm_P8.40mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=8.40mm, length*width=21.6*9.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 8.40mm  length 21.6mm width 9.1mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L21.6mm_W9.5mm_P7.11mm_Pulse_C
+L_Toroid, Vertical series, Radial, pin pitch=7.11mm, length*width=21.59*9.53mm^2, Pulse, C, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 7.11mm  length 21.59mm width 9.53mm Pulse C
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L21.6mm_W11.4mm_P7.62mm_Pulse_KM-3
+L_Toroid, Vertical series, Radial, pin pitch=7.62mm, length*width=21.59*11.43mm^2, Pulse, KM-3, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 7.62mm  length 21.59mm width 11.43mm Pulse KM-3
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L22.4mm_W10.2mm_P7.90mm_Vishay_TJ4
+L_Toroid, Vertical series, Radial, pin pitch=7.90mm, length*width=22.4*10.2mm^2, Vishay, TJ4, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 7.90mm  length 22.4mm width 10.2mm Vishay TJ4
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L24.6mm_W15.5mm_P11.44mm_Pulse_KM-4
+L_Toroid, Vertical series, Radial, pin pitch=11.44mm, length*width=24.64*15.5mm^2, Pulse, KM-4, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 11.44mm  length 24.64mm width 15.5mm Pulse KM-4
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L25.4mm_W14.7mm_P12.20mm_Vishay_TJ5
+L_Toroid, Vertical series, Radial, pin pitch=12.20mm, length*width=25.4*14.7mm^2, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 12.20mm  length 25.4mm width 14.7mm Vishay TJ5
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L25.4mm_W14.7mm_P12.20mm_Vishay_TJ5_BigPads
+L_Toroid, Vertical series, Radial, pin pitch=12.20mm, length*width=25.4*14.7mm^2, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 12.20mm  length 25.4mm width 14.7mm Vishay TJ5
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L26.7mm_W14.0mm_P10.16mm_Pulse_D
+L_Toroid, Vertical series, Radial, pin pitch=10.16mm, length*width=26.67*13.97mm^2, Pulse, D, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 10.16mm  length 26.67mm width 13.97mm Pulse D
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=11.43mm, length*width=28.6*14.3mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 11.43mm  length 28.6mm width 14.3mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L31.8mm_W15.9mm_P13.50mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=13.50mm, length*width=31.8*15.9mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 13.50mm  length 31.8mm width 15.9mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5
+L_Toroid, Vertical series, Radial, pin pitch=12.70mm, length*width=33.02*17.78mm^2, Pulse, KM-5, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 12.70mm  length 33.02mm width 17.78mm Pulse KM-5
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L35.1mm_W21.1mm_P18.50mm_Vishay_TJ6
+L_Toroid, Vertical series, Radial, pin pitch=18.50mm, length*width=35.1*21.1mm^2, Vishay, TJ6, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 18.50mm  length 35.1mm width 21.1mm Vishay TJ6
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L35.6mm_W17.8mm_P12.70mm_Pulse_E
+L_Toroid, Vertical series, Radial, pin pitch=12.70mm, length*width=35.56*17.78mm^2, Pulse, E, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 12.70mm  length 35.56mm width 17.78mm Pulse E
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L41.9mm_W17.8mm_P12.70mm_Pulse_F
+L_Toroid, Vertical series, Radial, pin pitch=12.70mm, length*width=41.91*17.78mm^2, Pulse, F, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf
+L_Toroid Vertical series Radial pin pitch 12.70mm  length 41.91mm width 17.78mm Pulse F
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L41.9mm_W19.1mm_P15.80mm_Vishay_TJ7
+L_Toroid, Vertical series, Radial, pin pitch=15.80mm, length*width=41.9*19.1mm^2, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 15.80mm  length 41.9mm width 19.1mm Vishay TJ7
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L46.0mm_W19.1mm_P21.80mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=21.80mm, length*width=46*19.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 21.80mm  length 46mm width 19.1mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L48.8mm_W25.4mm_P20.80mm_Vishay_TJ8
+L_Toroid, Vertical series, Radial, pin pitch=20.80mm, length*width=48.8*25.4mm^2, Vishay, TJ8, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 20.80mm  length 48.8mm width 25.4mm Vishay TJ8
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L54.0mm_W23.8mm_P20.10mm_Bourns_5700
+L_Toroid, Vertical series, Radial, pin pitch=20.10mm, length*width=54*23.8mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf
+L_Toroid Vertical series Radial pin pitch 20.10mm  length 54mm width 23.8mm Bourns 5700
+0
+2
+2
+Inductor_THT
+L_Toroid_Vertical_L67.6mm_W36.1mm_P31.80mm_Vishay_TJ9
+L_Toroid, Vertical series, Radial, pin pitch=31.80mm, length*width=67.6*36.1mm^2, Vishay, TJ9, http://www.vishay.com/docs/34079/tj.pdf
+L_Toroid Vertical series Radial pin pitch 31.80mm  length 67.6mm width 36.1mm Vishay TJ9
+0
+2
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-2012_LeadDiameter1.2mm
+Shielded High Current Inductor, body 17x22mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-2012-ROUND
+THT
+0
+2
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-2012_LeadDiameter1.5mm
+Shielded High Current Inductor, body 17x22mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-2012-ROUND
+THT
+0
+2
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-2504
+Shielded High Current Inductor, body 22x25.7mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT_SIZE_2504
+THT
+0
+2
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3521
+Shielded High Current Inductor, body 21.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3521
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3533_LeadDiameter1.8mm
+Shielded High Current Inductor, body 34.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3533-ROUND
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3533_LeadDiameter2.0mm
+Shielded High Current Inductor, body 34.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3533-ROUND
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3540_LeadDiameter0.8mm
+Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3540_LeadDiameter1.3mm
+Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3540_LeadDiameter1.5mm
+Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540
+THT
+0
+4
+2
+Inductor_THT_Wurth
+L_Wurth_WE-HCFT-3540_LeadDiameter2.0mm
+Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540
+THT
+0
+4
+2
+Jumper
+Jumper_Harwin_S1621_P10.9mm
+Harwin SMD jumper link, 12.3x2.3mm, 1.8mm height, 10.9mm pad pitch, https://cdn.harwin.com/pdfs/S1621R.pdf
+SMD jumper link
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 2 copper strips
+net tie solder jumper bridged
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 2 copper strips
+net tie solder jumper bridged
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip
+net tie solder jumper bridged
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip
+net tie solder jumper bridged
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open
+solder jumper open
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open
+solder jumper open
+0
+2
+2
+Jumper
+SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open
+solder jumper open
+0
+2
+2
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar123_Pad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2-3 bridged with 2 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar123_Pad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2-3 bridged with 2 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar123_RoundedPad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2-3 bridged with 2 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged2Bar123_RoundedPad1.0x1.5mm_NumberLabels
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2-3 bridged with 2 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged123_Pad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2-3 bridged with 1 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged123_Pad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2-3 bridged with 1 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2-3 bridged with 1 copper strip
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm_NumberLabels
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2-3 bridged with 1 copper strip, labeled with numbers
+net tie solder jumper bridged
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open
+solder jumper open
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers
+solder jumper open
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open
+solder jumper open
+0
+3
+3
+Jumper
+SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels
+SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open, labeled with numbers
+solder jumper open
+0
+3
+3
+Jumper
+SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm
+SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open
+solder jumper open
+0
+3
+3
+Jumper
+SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels
+SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open, labeled with numbers
+solder jumper open
+0
+3
+3
+LED_SMD
+LED-APA102-2020
+http://www.led-color.com/upload/201604/APA102-2020%20SMD%20LED.pdf
+LED RGB SPI
+0
+8
+6
+LED_SMD
+LED-L1T2_LUMILEDS
+http://www.lumileds.com/uploads/438/DS133-pdf
+LUMILEDS LUXEON TX L1T2 LED
+0
+3
+3
+LED_SMD
+LED_1W_3W_R8
+https://www.gme.cz/data/attachments/dsh.518-234.1.pdf
+LED 1W 3W 5W
+0
+3
+3
+LED_SMD
+LED_0201_0603Metric
+LED SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+LED
+0
+4
+2
+LED_SMD
+LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+LED SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+4
+2
+LED_SMD
+LED_0402_1005Metric
+LED SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder
+LED SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_0603_1608Metric
+LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder
+LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_0805_2012Metric
+LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder
+LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_01005_0402Metric
+LED SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+LED
+0
+4
+2
+LED_SMD
+LED_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+LED SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+4
+2
+LED_SMD
+LED_1206_3216Metric
+LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder
+LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm
+LED SMD 1206 (3216 Metric), reverse mount, square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+diode reverse
+0
+2
+2
+LED_SMD
+LED_1210_3225Metric
+LED SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder
+LED SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_1812_4532Metric
+LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_1812_4532Metric_Pad1.30x3.40mm_HandSolder
+LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_2010_5025Metric
+LED SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_2010_5025Metric_Pad1.52x2.65mm_HandSolder
+LED SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_2512_6332Metric
+LED SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED
+0
+2
+2
+LED_SMD
+LED_2512_6332Metric_Pad1.52x3.35mm_HandSolder
+LED SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator
+LED handsolder
+0
+2
+2
+LED_SMD
+LED_ASMB-KTF0-0A306
+2220 Tricolor PLCC-4 LED, https://docs.broadcom.com/docs/ASMB-KTF0-0A306-DS100
+Tricolor LED
+0
+4
+4
+LED_SMD
+LED_Avago_PLCC4_3.2x2.8mm_CW
+3.2mm x 2.8mm PLCC4 RGB LED, https://docs.broadcom.com/docs/AV02-4186EN
+LED Avago PLCC-4 3528 ASMB-MTB0-0A3A2
+0
+4
+4
+LED_SMD
+LED_Avago_PLCC6_3x2.8mm
+https://docs.broadcom.com/docs/AV02-3793EN
+LED Avago PLCC-6 ASMT-YTB7-0AA02
+0
+6
+6
+LED_SMD
+LED_CSP_Samsung_LH181B_2.36x2.36mm
+High Power CSP LED, 2.36mm x 2.36mm, 1.4A max, https://cdn.samsung.com/led/file/resource/2021/01/Data_Sheet_LH181B_Rev.4.0.pdf
+LED Samsung LH181B
+0
+2
+2
+LED_SMD
+LED_Cree-PLCC4_2x2mm_CW
+2.0mm x 2.0mm PLCC4 RGB LED, https://assets.cree-led.com/a/ds/h/HB-CLMVC-FKA.pdf
+LED Cree PLCC-4 2020 CLMVB-FKA CLMVC-FKA
+0
+4
+4
+LED_SMD
+LED_Cree-PLCC4_3.2x2.8mm_CCW
+3.2mm x 2.8mm PLCC4 RGB LED, https://assets.cree-led.com/a/ds/h/HB-CLV1A-FKB.pdf
+LED Cree PLCC-4 3528 CLV1A-FKB
+0
+4
+4
+LED_SMD
+LED_Cree-PLCC4_5x5mm_CW
+5.0mm x 5.0mm PLCC4 LED
+LED Cree PLCC-4 5050
+0
+4
+4
+LED_SMD
+LED_Cree-PLCC6_4.7x1.5mm
+4.7mm x 1.5mm PLCC6 LED, http://www.cree.com/led-components/media/documents/1381-QLS6AFKW.pdf
+LED Cree PLCC-6
+0
+6
+6
+LED_SMD
+LED_Cree-XB
+http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/XLampXBD.pdf
+LED Cree XB
+0
+5
+3
+LED_SMD
+LED_Cree-XH
+http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XHB.pdf
+LED Cree XH
+0
+8
+2
+LED_SMD
+LED_Cree-XHP35
+http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds--XHP35.pdf
+LED Cree XHP35
+0
+6
+3
+LED_SMD
+LED_Cree-XHP50_6V
+Cree XHP50, 6V footprint, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP50.pdf
+LED Cree XHP50
+0
+15
+3
+LED_SMD
+LED_Cree-XHP50_12V
+Cree XHP50, 12V footprint, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP50.pdf
+LED XHP50 Cree
+0
+15
+3
+LED_SMD
+LED_Cree-XHP70_6V
+Cree XHP70 LED, 6V version, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP70.pdf
+LED Cree XHP70
+0
+15
+3
+LED_SMD
+LED_Cree-XHP70_12V
+Cree XHP70 LED, 12V version, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP70.pdf
+LED Cree XHP70
+0
+15
+3
+LED_SMD
+LED_Cree-XP
+LED Cree-XP http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/XLampXPE2.pdf
+LED Cree XP
+0
+6
+3
+LED_SMD
+LED_Cree-XP-G
+LED Cree-XP-G http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/XLampXPG.pdf
+LED Cree XP-G
+0
+6
+3
+LED_SMD
+LED_Cree-XQ
+LED Cree-XQ http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XQB.pdf
+LED Cree XQ
+0
+2
+2
+LED_SMD
+LED_Cree-XQ_HandSoldering
+LED Cree-XQ handsoldering pads http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XQB.pdf
+LED Cree XQ
+0
+2
+2
+LED_SMD
+LED_Dialight_591
+LED SMD 3mm Right Angle series (http://www.dialightsignalsandcomponents.com/Assets/Drawings/2D_Drawings_DrawingDetailedSpec/C17354.pdf)
+LED Dialight 591
+0
+2
+2
+LED_SMD
+LED_Everlight-SMD3528_3.5x2.8mm_67-21ST
+3.5mm x 2.8mm mid-power LED, https://www.everlight.com/wp-content/plugins/ItemRelationship/product_files/pdf/DSE-0020730-67-21ST-KK6C-HXXXX96Z6-2T_V3.pdf
+LED 3528
+0
+2
+2
+LED_SMD
+LED_Inolux_IN-P55TATRGB_PLCC6_5.0x5.5mm_P1.8mm
+5.0x5.0mm PLCC-6 RGB LED, Inolux, https://www.inolux-corp.com/datasheet/SMDLED/RGB%20Top%20View/IN-P55TATRGB.pdf
+LED RGB
+0
+6
+6
+LED_SMD
+LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm
+5.0mm x 5.0mm PLCC4 Addressable RGB LED, http://www.inolux-corp.com/datasheet/SMDLED/Addressable%20LED/IN-PI554FCH.pdf
+LED RGB NeoPixel addressable PLCC-4 5050
+0
+4
+4
+LED_SMD
+LED_Kingbright_AAA3528ESGCT
+Kingbright, dual LED, 3.5 x 2.8 mm Surface Mount LED Lamp (http://www.kingbrightusa.com/images/catalog/SPEC/AAA3528ESGCT.pdf)
+dual led smd
+0
+4
+4
+LED_SMD
+LED_Kingbright_APA1606_1.6x0.6mm_Horizontal
+Right angled LED, 1.6x1.2 mm, H0.6 mm
+LED chip right angled vertical
+0
+2
+2
+LED_SMD
+LED_Kingbright_APDA3020VBCD
+LED, SMD, APDA3020VBC/D, https://www.kingbrightusa.com/images/catalog/SPEC/APDA3020VBC-D.pdf
+LED APDA3020VBC/D Kingbright 
+0
+2
+2
+LED_SMD
+LED_Kingbright_APFA3010_3x1.5mm_Horizontal
+LED RGB, APFA3010, http://www.kingbrightusa.com/images/catalog/SPEC/APFA3010LSEEZGKQBKC.pdf
+LED RGB APFA3010 KINGBRIGHT 3x1.5mm
+0
+4
+4
+LED_SMD
+LED_Kingbright_APHBM2012_2x1.25mm
+Dual LED SMD https://www.kingbrightusa.com/KCpack.asp?txtPack=APHBM2012
+LED Kingbright APHM2012
+0
+4
+4
+LED_SMD
+LED_Kingbright_KPA-3010_3x2x1mm
+Kingbright surface mount LED, right angle, 3.0 x 2.0 x 1.0 mm, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPA-3010SURCK(Ver.26A).pdf
+Kingbright LED right-angle
+0
+3
+3
+LED_SMD
+LED_Kingbright_KPBD-3224
+Kingbright, dual LED, red-green, dome lens, 3.2 x 2.4 mm Surface Mount LED Lamp (https://docs.rs-online.com/b881/0900766b81396b45.pdf)
+Kingbright dual LED KPBD-3224
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-C19HE1WT
+LiteOn RGB LED; https://optoelectronics.liteon.com/upload/download/DS22-2008-0044/LTST-C19HE1WT.pdf
+LED RGB Chip SMD
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-C235KGKRKT
+downfacing reverse mount led, https://optoelectronics.liteon.com/upload/download/DS22-2009-0219/LTST-C235KGKRKT.pdf
+LED reverse down facing
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-C295K_1.6x0.8mm
+Topview dual http://optoelectronics.liteon.com/upload/download/DS22-2009-0072/LTST-C295KGKRKT.PDF
+SMD Top view Dual colour
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-E563C_PLCC4_5.0x5.0mm_P3.2mm
+RGB addressable LED, 5x5mm body, 1.57mm height, https://optoelectronics.liteon.com/upload/download/DS35-2018-0092/LTST-E563CHEGBW-AW.PDF
+LED RGB 5050 PLCC-4
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-E563C_PLCC4_5.0x5.0mm_P3.2mm_HandSoldering
+RGB addressable LED, 5x5mm body, 1.57mm height, https://optoelectronics.liteon.com/upload/download/DS35-2018-0092/LTST-E563CHEGBW-AW.PDF
+LED RGB 5050 PLCC-4
+0
+4
+4
+LED_SMD
+LED_LiteOn_LTST-S326
+http://optoelectronics.liteon.com/upload/download/DS22-2000-287/LTST-S326KGJRKT.PDF
+LED SMD right angle  CCA
+0
+3
+3
+LED_SMD
+LED_Lumex_SML-LX0303SIUPGUSB
+Lumex RGB LED, clear, SMD, https://www.lumex.com/spec/SML-LX0303SIUPGUSB.pdf
+LED RGB
+0
+4
+4
+LED_SMD
+LED_Lumex_SML-LX0404SIUPGUSB
+Lumex RGB LED, clear, SMD, https://www.lumex.com/spec/SML-LX0404SIUPGUSB.pdf
+LED RGB
+0
+4
+4
+LED_SMD
+LED_Luminus_MP-3030-1100_3.0x3.0mm
+Mid Power LED, Luminus MP-3030-1100, 3.0x3.0mm, 816mW, https://download.luminus.com/datasheets/Luminus_MP3030_1100_Datasheet.pdf
+LED Luminus MP-3030-1100
+0
+5
+2
+LED_SMD
+LED_OPSCO_SK6812_PLCC4_5.0x5.0mm_P3.1mm
+5.0mm x 5.0mm Addressable RGB LED,  https://www.lcsc.com/datasheet/lcsc_datasheet_2303300930_OPSCO-Optoelectronics-SK6812-B_C5380881.pdf#page=5
+LED RGB NeoPixel Serial PLCC-4 5050
+0
+4
+4
+LED_SMD
+LED_Osram_Lx_P47F_D2mm_ReverseMount
+OSRAM, reverse-mount LED, SMD, 2mm diameter, http://www.farnell.com/datasheets/2711587.pdf
+LED ReverseMount Reverse
+0
+4
+2
+LED_SMD
+LED_PLCC-2_3.4x3.0mm_AK
+LED PLCC-2 SMD package, orientation marker at anode, https://look.ams-osram.com/m/6070706f97923d92/original/SFH-4257.pdf
+LED PLCC-2 SMD TOPLED
+0
+2
+2
+LED_SMD
+LED_PLCC-2_3.4x3.0mm_KA
+LED PLCC-2 SMD package, orientation marker at cathode, https://look.ams-osram.com/m/112b2fbfa9e71b58/original/SFH-4253.pdf
+LED PLCC-2 SMD TOPLED
+0
+2
+2
+LED_SMD
+LED_PLCC-2_3x2mm_AK
+LED, SMD, PLCC-2, 3.0 x 2.0mm, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf
+LED PLCC-2 SMD
+0
+2
+2
+LED_SMD
+LED_PLCC-2_3x2mm_KA
+LED, SMD, PLCC-2, 3.0 x 2.0mm, orientation marker at cathode, https://optoelectronics.liteon.com/upload/download/DS22-2009-0099/LTW-M670ZVS-M5_0906.pdf
+LED PLCC-2 SMD
+0
+2
+2
+LED_SMD
+LED_PLCC_2835
+https://www.luckylight.cn/media/component/data-sheet/R2835BC-B2M-M10.pdf
+LED
+0
+2
+2
+LED_SMD
+LED_PLCC_2835_Handsoldering
+https://www.luckylight.cn/media/component/data-sheet/R2835BC-B2M-M10.pdf
+LED
+0
+2
+2
+LED_SMD
+LED_RGB_1210
+RGB LED 3.2x2.7mm http://www.avagotech.com/docs/AV02-0610EN
+LED 3227
+0
+4
+4
+LED_SMD
+LED_RGB_5050-6
+http://cdn.sparkfun.com/datasheets/Components/LED/5060BRG4.pdf
+RGB LED 5050-6
+0
+6
+6
+LED_SMD
+LED_RGB_Cree-PLCC-6_6x5mm_P2.1mm
+http://www.farnell.com/datasheets/2003905.pdf
+LED RGB PLCC-6 CLP6C-FBK
+0
+6
+6
+LED_SMD
+LED_RGB_Everlight_EASV3015RGBA0_Horizontal
+LED, RGB, right-angle, clear, https://everlightamericas.com/index.php?controller=attachment&id_attachment=3220
+LED RGB right-angle
+0
+4
+4
+LED_SMD
+LED_RGB_Getian_GT-P6PRGB4303
+https://www.gme.sk/img/cache/doc/518/177/vykonova-led-getian-gt-p6prgb4303-datasheet-1.pdf
+LED RGB 
+0
+7
+7
+LED_SMD
+LED_RGB_Lumex_SML-LXT0805SIUGUBW
+RGB LED 0805 2.0mm x 1.3mm, orientation marker at common anode https://www.mouser.de/datasheet/2/244/SML-LXT0805SIUGUBW-1776540.pdf
+RGB LED 0805
+0
+4
+4
+LED_SMD
+LED_RGB_PLCC-6
+RGB LED PLCC-6
+RGB LED PLCC-6
+0
+6
+6
+LED_SMD
+LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100
+3.2mm x 2.8mm PLCC4 LED, https://www.we-online.de/katalog/datasheet/150141M173100.pdf
+LED RGB Wurth PLCC-4 3528
+0
+4
+4
+LED_SMD
+LED_RGB_Wuerth_150080M153000
+RGB LED 0805 2.0mm x 1.3mm, orientation marker at common anode https://www.we-online.com/components/products/datasheet/150080M153000.pdf
+RGB LED 0805
+0
+4
+4
+LED_SMD
+LED_ROHM_SMLVN6
+RGB LED, 3.1x2.8mm, https://fscdn.rohm.com/en/products/databook/datasheet/opto/led/chip_multi/smlvn6rgb1u1-e.pdf
+LED ROHM SMLVN6
+0
+6
+6
+LED_SMD
+LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm
+https://cdn-shop.adafruit.com/product-files/3484/3484_Datasheet.pdf
+LED RGB NeoPixel Nano PLCC-4
+0
+4
+4
+LED_SMD
+LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm
+3.5mm x 3.5mm PLCC4 Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/product-files/2686/SK6812MINI_REV.01-1-2.pdf
+LED RGB NeoPixel Mini PLCC-4 3535
+0
+4
+4
+LED_SMD
+LED_SK6812_EC15_1.5x1.5mm
+RGB addressable LED, 0.1W, 1.5mm x 1.5mm, 0.65m height, orientation mark at GND, http://ledstrip-china.com/productshow.asp?id=322
+LED RGB NeoPixel
+0
+4
+4
+LED_SMD
+LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm
+5.0mm x 5.0mm Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/product-files/1138/SK6812+LED+datasheet+.pdf
+LED RGB NeoPixel PLCC-4 5050
+0
+4
+4
+LED_SMD
+LED_WS2812B-2020_PLCC4_2.0x2.0mm
+2.0mm x 2.0mm Addressable RGB LED NeoPixel Nano, 12 mA, https://cdn-shop.adafruit.com/product-files/4684/4684_WS2812B-2020_V1.3_EN.pdf
+LED RGB NeoPixel Nano PLCC-4 2020
+0
+4
+4
+LED_SMD
+LED_WS2812B-Mini_PLCC4_3.5x3.5mm
+Addressable RGB LED NeoPixel Mini, 12 mA, https://web.archive.org/web/20200131233647/http://www.world-semi.com/DownLoadFile/112
+LED RGB NeoPixel Mini
+0
+4
+4
+LED_SMD
+LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm
+5.0mm x 5.0mm Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf
+LED RGB NeoPixel PLCC-4 5050
+0
+4
+4
+LED_SMD
+LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm
+https://cdn-shop.adafruit.com/datasheets/WS2812.pdf
+LED RGB NeoPixel
+0
+6
+6
+LED_SMD
+LED_Wurth_150044M155260
+Wurth Common anode RGB LED, SMD, 0404, 1x1x1.65mm, https://www.we-online.com/catalog/datasheet/150044M155260.pdf
+LED RGB ARGB 
+0
+4
+4
+LED_SMD
+LED_Yuji_5730
+LED,Yuji,5730,https://cdn.shopify.com/s/files/1/0344/6401/files/YJWJ014-1.1_YJ-BC-5730L-G02.pdf
+LED Yuji 5730
+0
+3
+2
+LED_SMD
+LED_miniPLCC_2315
+https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DAV02-2205EN_DS_ASMT-TxBM_2014-05-09.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430858274704&ssbinary=true
+LED
+0
+2
+2
+LED_SMD
+LED_miniPLCC_2315_Handsoldering
+https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DAV02-2205EN_DS_ASMT-TxBM_2014-05-09.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430858274704&ssbinary=true
+LED
+0
+2
+2
+LED_THT
+LED_BL-FL7680RGB
+'Piranha' RGB LED, through hole, common anode, 7.62x7.62mm, BGRA pin order, https://cdn-shop.adafruit.com/datasheets/BL-FL7680RGB.pdf
+RGB LED Piranha Super-Flux BetLux
+0
+4
+4
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 1.27mm, z-position of LED center 1.6mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z4.9mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 1.27mm, z-position of LED center 4.9mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z8.2mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 1.27mm, z-position of LED center 8.2mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z1.6mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 3.81mm, z-position of LED center 1.6mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z4.9mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 3.81mm, z-position of LED center 4.9mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z8.2mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 3.81mm, z-position of LED center 8.2mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z1.6mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 6.35mm, z-position of LED center 1.6mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z4.9mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 6.35mm, z-position of LED center 4.9mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z8.2mm
+LED, diameter 1.8mm, size 1.8x2.4mm, horizontal offset 6.35mm, z-position of LED center 8.2mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D1.8mm_W3.3mm_H2.4mm
+LED, Round, Rectangular, size 3.3x2.4mm, diameter 1.8mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D2.0mm_W4.0mm_H2.8mm_FlatTop
+LED, Round, Flat Top, Rectangular, size 4.0x2.8mm, diameter 2.0mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-1034IDT(Ver.14A).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D2.0mm_W4.8mm_H2.5mm_FlatTop
+LED, Round, Flat Top, Rectangular, size 4.8x2.5mm, diameter 2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20160808bak/L-13GD(Ver.9B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm
+LED, diameter 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm-3
+LED, diameter 3.0mm, 3 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-3VSURKCGKC(Ver.12A).pdf, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_D3.0mm_Clear
+LED, diameter 3.0mm, 2 pins, clear, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_FlatTop
+LED, Round, Flat Top, diameter 3.0mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.14A).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 2.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_Clear
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 2.0mm, 2 pins, clear, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRBlack
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 2.0mm, 2 pins, infrared, black, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRGrey
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 2.0mm, 2 pins, infrared, grey, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 6.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O1.27mm_Z10.0mm
+LED, diameter 3.0mm, horizontal offset 1.27mm, z-position of LED center 10.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm
+LED, diameter 3.0mm, horizontal offset 3.81mm, z-position of LED center 2.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm
+LED, diameter 3.0mm, horizontal offset 3.81mm, z-position of LED center 6.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm
+LED, diameter 3.0mm, horizontal offset 3.81mm, z-position of LED center 10.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O6.35mm_Z2.0mm
+LED, diameter 3.0mm, horizontal offset 6.35mm, z-position of LED center 2.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm
+LED, diameter 3.0mm, horizontal offset 6.35mm, z-position of LED center 6.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_Horizontal_O6.35mm_Z10.0mm
+LED, diameter 3.0mm, horizontal offset 6.35mm, z-position of LED center 10.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D3.0mm_IRBlack
+LED, diameter 3.0mm, 2 pins, infrared, black, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D3.0mm_IRGrey
+LED, diameter 3.0mm, 2 pins, infrared, grey, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D4.0mm
+LED, diameter 4.0mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-43GD(Ver.17B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm
+LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm-3
+LED, diameter 5.0mm, 3 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-59EGC(Ver.20A).pdf, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_D5.0mm-3_Horizontal_O3.81mm_Z3.0mm
+LED, diameter 5.0mm, horizontal offset 3.81mm, z-position of LED center 3.0mm, 3 pins, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_D5.0mm-4_RGB
+LED, RGB, diameter 5.0mm, 4 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.13A).pdf, generated by kicad-footprint-generator
+LED
+0
+4
+4
+LED_THT
+LED_D5.0mm-4_RGB_Staggered_Pins
+LED, diameter 5.0mm, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf
+rgb led
+0
+4
+4
+LED_THT
+LED_D5.0mm-4_RGB_Wide_Pins
+LED, diameter 5.0mm, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf
+LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins diameter 5.0mm 4 pins RGB RGBLED
+0
+4
+4
+LED_THT
+LED_D5.0mm_Clear
+LED, diameter 5.0mm, 2 pins, clear, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_FlatTop
+LED, Round, Flat Top, diameter 5.0mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/watermark00/L-483GDT(Ver.12B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 3.0mm, 2 pins, clear, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRBlack
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 3.0mm, 2 pins, infrared, black, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRGrey
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 3.0mm, 2 pins, infrared, grey, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 9.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O1.27mm_Z15.0mm
+LED, diameter 5.0mm, horizontal offset 1.27mm, z-position of LED center 15.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O3.81mm_Z3.0mm
+LED, diameter 5.0mm, horizontal offset 3.81mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O3.81mm_Z9.0mm
+LED, diameter 5.0mm, horizontal offset 3.81mm, z-position of LED center 9.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O3.81mm_Z15.0mm
+LED, diameter 5.0mm, horizontal offset 3.81mm, z-position of LED center 15.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm
+LED, diameter 5.0mm, horizontal offset 6.35mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O6.35mm_Z9.0mm
+LED, diameter 5.0mm, horizontal offset 6.35mm, z-position of LED center 9.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm
+LED, diameter 5.0mm, horizontal offset 6.35mm, z-position of LED center 15.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D5.0mm_IRBlack
+LED, diameter 5.0mm, 2 pins, infrared, black, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D5.0mm_IRGrey
+LED, diameter 5.0mm, 2 pins, infrared, grey, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf, generated by kicad-footprint-generator
+LED IR
+0
+2
+2
+LED_THT
+LED_D8.0mm
+LED, diameter 8.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED8MMGE_LED8MMGN_LED8MMRT%23KIN.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D8.0mm-3
+LED, diameter 8.0mm, 3 pins, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_D10.0mm
+LED, diameter 10.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED10-4500RT%23KIN.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_D10.0mm-3
+LED, diameter 10.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20131112/L-819EGW(Ver.13A).pdf, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_D20.0mm
+LED, diameter 20.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/DLC2-6GD%28V6%29.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Oval_W5.2mm_H3.8mm
+LED, Oval, size 5.2x3.8mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-5603QBC-D(Ver.17B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W3.0mm_H2.0mm
+LED, Rectangular, size 3.0x2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20160808bak/L-169XCGDK(Ver.8B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W3.9mm_H1.8mm
+LED, Rectangular, size 3.9x1.8mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20160808bak/L-2774GD(Ver.7B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W3.9mm_H1.9mm
+LED, Rectangular, size 3.9x1.9mm, 2 pins, https://www.kingbright.com/attachments/file/psearch/000/00/watermark00/L-144GDT(Ver.11B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm
+LED, Rectangular, size 5.0x2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm-3Pins
+LED, Rectangular, size 5.0x2.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20160808bak/L-169XCGDK(Ver.8B).pdf, generated by kicad-footprint-generator
+LED
+0
+3
+3
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z1.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 1.27mm, z-position of LED center 1.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z3.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 1.27mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z5.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 1.27mm, z-position of LED center 5.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z1.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 3.81mm, z-position of LED center 1.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z3.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 3.81mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z5.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 3.81mm, z-position of LED center 5.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z1.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 6.35mm, z-position of LED center 1.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z3.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 6.35mm, z-position of LED center 3.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z5.0mm
+LED, Rectangular, size 5.0x2.0mm, horizontal offset 6.35mm, z-position of LED center 5.0mm, 2 pins, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W5.0mm_H5.0mm
+LED, Rectangular, size 5.0x5.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/20160808bak/L-169XCGDK(Ver.8B).pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_Rectangular_W7.62mm_H4.55mm_P5.08mm_R3
+Datasheet can be found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf
+LED automotive super flux 7.62mm
+0
+4
+2
+LED_THT
+LED_SideEmitter_Rectangular_W4.5mm_H1.6mm
+LED, Side Emitter, Rectangular, size 4.5x1.6mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED15MMGE_LED15MMGN%23KIN.pdf, generated by kicad-footprint-generator
+LED
+0
+2
+2
+LED_THT
+LED_VCCLite_5381H1_6.35x6.35mm
+Red 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf
+Red 5381 Series LED
+0
+2
+2
+LED_THT
+LED_VCCLite_5381H3_6.35x6.35mm
+Amber 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf
+Amber 5381 Series LED
+0
+2
+2
+LED_THT
+LED_VCCLite_5381H5_6.35x6.35mm
+Green 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf
+Green 5381 Series LED
+0
+2
+2
+LED_THT
+LED_VCCLite_5381H7_6.35x6.35mm
+Yellow 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf
+Yellow 5381 Series LED
+0
+2
+2
+Module
+A20_OLINUXINO_LIME2
+A20 Olinuxino LIME2, 1.2GHz, 512-1024MB RAM, Micro-SD, NAND or eMMC, 1000Mbit Ethernet
+A20 Olimex Olinuxino LIME2 development board
+0
+180
+180
+Module
+Adafruit_Feather
+Common footprint for the Adafruit Feather series of boards, https://learn.adafruit.com/adafruit-feather/feather-specification
+Adafruit Feather
+0
+28
+28
+Module
+Adafruit_Feather_32u4_FONA
+Footprint for the Adafruit Feather 32u4 FONA board, https://learn.adafruit.com/adafruit-feather-32u4-fona
+Adafruit Feather 32u4 FONA
+0
+28
+28
+Module
+Adafruit_Feather_32u4_FONA_WithMountingHoles
+Footprint for the Adafruit Feather 32u4 FONA board, https://learn.adafruit.com/adafruit-feather-32u4-fona
+Adafruit Feather 32u4 FONA
+0
+28
+28
+Module
+Adafruit_Feather_32u4_RFM
+Footprint for the Adafruit Feather 32u4 RFM series of boards, https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-module
+Adafruit Feather 32u4 RFM
+0
+31
+31
+Module
+Adafruit_Feather_32u4_RFM_WithMountingHoles
+Footprint for the Adafruit Feather 32u4 RFM series of boards, https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-module
+Adafruit Feather 32u4 RFM
+0
+31
+31
+Module
+Adafruit_Feather_M0_RFM
+Footprint for the Adafruit Feather M0 RFM series of boards, e.g. https://learn.adafruit.com/adafruit-feather-m0-radio-with-rfm69-packet-radio
+Adafruit Feather M0 RFM
+0
+32
+32
+Module
+Adafruit_Feather_M0_RFM_WithMountingHoles
+Footprint for the Adafruit Feather M0 RFM series of boards, e.g. https://learn.adafruit.com/adafruit-feather-m0-radio-with-rfm69-packet-radio
+ Adafruit Feather M0 RFM
+0
+32
+32
+Module
+Adafruit_Feather_M0_Wifi
+Footprint for the Adafruit Feather M0 Wifi board, https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/
+Adafruit Feather M0 Wifi
+0
+28
+28
+Module
+Adafruit_Feather_M0_Wifi_WithMountingHoles
+Footprint for the Adafruit Feather M0 Wifi board, https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/
+Adafruit Feather M0 Wifi
+0
+28
+28
+Module
+Adafruit_Feather_WICED
+Footprint for the Adafruit Feather WICED Wifi board, https://learn.adafruit.com/introducing-the-adafruit-wiced-feather-wifi
+Adafruit Feather WICED Wifi
+0
+29
+29
+Module
+Adafruit_Feather_WICED_WithMountingHoles
+Footprint for the Adafruit Feather WICED Wifi board, https://learn.adafruit.com/introducing-the-adafruit-wiced-feather-wifi
+Adafruit Feather WICED Wifi
+0
+29
+29
+Module
+Adafruit_Feather_WithMountingHoles
+Common footprint for the Adafruit Feather series of boards, https://learn.adafruit.com/adafruit-feather/feather-specification
+Adafruit Feather
+0
+28
+28
+Module
+Adafruit_HUZZAH_ESP8266_breakout
+32-bit microcontroller module with WiFi, https://www.adafruit.com/product/2471
+ESP8266 WiFi microcontroller
+0
+20
+20
+Module
+Adafruit_HUZZAH_ESP8266_breakout_WithMountingHoles
+32-bit microcontroller module with WiFi, https://www.adafruit.com/product/2471
+ESP8266 WiFi microcontroller
+0
+20
+20
+Module
+Arduino_Nano
+Arduino Nano, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino Nano
+0
+30
+30
+Module
+Arduino_Nano_WithMountingHoles
+Arduino Nano, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino Nano
+0
+30
+30
+Module
+Arduino_UNO_R2
+Arduino UNO R2, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino UNO R2
+0
+30
+30
+Module
+Arduino_UNO_R2_WithMountingHoles
+Arduino UNO R2, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino UNO R2
+0
+30
+30
+Module
+Arduino_UNO_R3
+Arduino UNO R3, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino UNO R3
+0
+32
+32
+Module
+Arduino_UNO_R3_WithMountingHoles
+Arduino UNO R3, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf
+Arduino UNO R3
+0
+32
+32
+Module
+BeagleBoard_PocketBeagle
+PocketBeagle, https://github.com/beagleboard/pocketbeagle/wiki/System-Reference-Manual#71_Expansion_Header_Connectors
+PocketBeagle
+0
+72
+72
+Module
+Carambola2
+8devices Carambola2, OpenWRT, industrial SoM computer, https://www.8devices.com/media/products/carambola2/downloads/carambola2-datasheet.pdf
+carambola2 8devices
+0
+104
+52
+Module
+Electrosmith_Daisy_Seed
+Embedded platform for audio applications. 96kHz / 24-bit audio hardware. 64MB of SDRAM for up to 10 minute long audio. ARM Cortex-M7 MCU, running at 480MHz. 31 total GPIO pins with configurable functionality. 12-bit Digital to Analog Converters (x2). SD card interfaces. PWM outputs. Serial Protocols for connecting external sensors and devices (SPI, UART, I2S, I2C). Dedicated VIN pin for power. Micro USB port, and additional USB pins for full OTG-support as host and device. https://static1.squarespace.com/static/58d03fdc1b10e3bf442567b8/t/6227e6236f02fb68d1577146/1646781988478/Daisy_Seed_datasheet_v1.0.3.pdf
+Electrosmith Daisy Seed Microcontroller Module ARM Cortex-M7 Audio Codec
+0
+40
+40
+Module
+Flipper_Zero_Angled
+Connector for Flipper Zero Straight https://docs.flipper.net/development/hardware/modules-blueprints
+Flipper Zero
+0
+18
+18
+Module
+Flipper_Zero_Straight
+Connector for Flipper Zero Straight https://docs.flipper.net/development/hardware/modules-blueprints
+Flipper Zero
+0
+18
+18
+Module
+Google_Coral_SMT_TPU_Module
+Google_Coral_SMT_TPU_Module (https://coral.ai/static/files/Coral-Accelerator-Module-datasheet.pdf)
+Google_Coral TPU Module
+0
+120
+120
+Module
+Maple_Mini
+Maple Mini, http://docs.leaflabs.com/static.leaflabs.com/pub/leaflabs/maple-docs/0.0.12/hardware/maple-mini.html
+Maple Mini
+0
+40
+40
+Module
+Olimex_MOD-WIFI-ESP8266-DEV
+ESP8266 development board https://www.olimex.com/Products/IoT/ESP8266/MOD-WIFI-ESP8266-DEV/resources/dimensions-WIFI-ESP8266-DEV.png
+ESP8266
+0
+22
+22
+Module
+Onion_Omega2+
+https://onion.io/omega2/
+Omega Onion module
+0
+32
+32
+Module
+Onion_Omega2S
+https://github.com/OnionIoT/Omega2/raw/master/Documents/Omega2S%20Datasheet.pdf
+onion omega module
+0
+89
+64
+Module
+Pololu_Breakout-16_15.2x20.3mm
+Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8\
+Pololu Breakout
+0
+16
+16
+Module
+RaspberryPi_Pico_Common_SMD
+Raspberry Pi Pico common (Pico & Pico W) surface-mount footprint for reflow or hand soldering, supports Raspberry Pi Pico 2, https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf
+module usb pcb antenna
+0
+80
+40
+Module
+RaspberryPi_Pico_Common_THT
+Raspberry Pi Pico common (Pico & Pico W) through-hole footprint, supports Raspberry Pi Pico 2, default socketed model has height of 8.51mm, https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf
+module usb pcb antenna
+0
+40
+40
+Module
+RaspberryPi_Pico_Common_Unspecified
+Raspberry Pi Pico versatile common (Pico & Pico W) footprint for surface-mount or through-hole hand soldering, supports Raspberry Pi Pico 2, default socketed model has height of 8.51mm, https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf
+module usb pcb antenna
+0
+80
+40
+Module
+RaspberryPi_Pico_SMD
+Raspberry Pi Pico (non-W) surface-mount footprint for reflow soldering with test points and debug pads, supports Raspberry Pi Pico 2 (non-W), https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf
+module usb pcb swd
+0
+96
+49
+Module
+RaspberryPi_Pico_SMD_HandSolder
+Raspberry Pi Pico (non-W) surface-mount footprint with debug pads for hand soldering, supports Raspberry Pi Pico 2 (non-W), https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf
+module usb pcb swd
+0
+86
+43
+Module
+RaspberryPi_Pico_W_SMD
+Raspberry Pi Pico W surface-mount footprint for reflow soldering with test points and debug pads (not compatible with non-wireless Pico), supports Raspberry Pi Pico 2 W, https://datasheets.raspberrypi.com/picow/pico-w-datasheet.pdf
+module usb pcb swd antenna
+0
+93
+49
+Module
+RaspberryPi_Pico_W_SMD_HandSolder
+Raspberry Pi Pico W surface-mount footprint with debug pads for hand soldering (not compatible with non-wireless Pico), supports Raspberry Pi Pico 2 W, https://datasheets.raspberrypi.com/picow/pico-w-datasheet.pdf
+module usb pcb swd antenna
+0
+83
+43
+Module
+Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles
+Raspberry Pi Zero using through hole straight pin socket, 2x20, 2.54mm pitch, https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/rpi_MECH_Zero_1p2.pdf
+raspberry pi zero through hole
+0
+40
+40
+Module
+ST_Morpho_Connector_144_STLink
+ST Morpho Connector 144 With STLink
+ST Morpho Connector 144 STLink
+0
+148
+148
+Module
+ST_Morpho_Connector_144_STLink_MountingHoles
+ST Morpho Connector 144 With STLink
+ST Morpho Connector 144 STLink
+0
+148
+148
+Module
+Sipeed-M1
+MAIX Dual Core RISC-V MCU, https://dl.sipeed.com/MAIX/HDK/Sipeed-M1&M1W/Specifications
+AI Kendryte K210 RISC-V
+0
+85
+72
+Module
+Sipeed-M1W
+MAIX RISC-V Dual Core MCU with wifi, https://dl.sipeed.com/MAIX/HDK/Sipeed-M1&M1W/Specifications
+AI Kendryte K210 RISC-V
+0
+85
+72
+Module
+Texas_EUK_R-PDSS-T7_THT
+Texas Instruments EUK 7 Pin Double Sided Module
+module pcb
+0
+7
+7
+Module
+Texas_EUS_R-PDSS-T5_THT
+Texas Instruments EUS 5 Pin Double Sided Module
+module pcb
+0
+5
+5
+Module
+Texas_EUW_R-PDSS-T7_THT
+Texas Instruments EUW 7 Pin Double Sided Module
+module pcb
+0
+7
+7
+Motors
+Vybronics_VZ30C1T8219732L
+Vibration motor, 2.3-3.2V, 14000rpm, 0.7G, https://www.vybronics.com/wp-content/uploads/datasheet-files/Vybronics-VZ30C1T8219732L-datasheet.pdf
+vibration motor Vybronics
+0
+12
+3
+MountingEquipment
+DINRailAdapter_3xM3_PhoenixContact_1201578
+https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1201578&library=usen&tab=1
+DIN rail adapter universal three M3 clearance holes
+0
+0
+0
+MountingHole
+MountingHole_2.1mm
+Mounting Hole 2.1mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_2.2mm_M2
+Mounting Hole 2.2mm, M2, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2
+0
+0
+0
+MountingHole
+MountingHole_2.2mm_M2_DIN965
+Mounting Hole 2.2mm, M2, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 DIN965
+0
+0
+0
+MountingHole
+MountingHole_2.2mm_M2_DIN965_Pad
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 DIN965
+0
+1
+1
+MountingHole
+MountingHole_2.2mm_M2_DIN965_Pad_TopBottom
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 DIN965
+0
+3
+1
+MountingHole
+MountingHole_2.2mm_M2_DIN965_Pad_TopOnly
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 DIN965
+0
+2
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO7380
+Mounting Hole 2.2mm, M2, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_2.2mm_M2_ISO7380_Pad
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO7380_Pad_TopBottom
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO7380_Pad_TopOnly
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO14580
+Mounting Hole 2.2mm, M2, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_2.2mm_M2_ISO14580_Pad
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO14580_Pad_TopBottom
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_2.2mm_M2_ISO14580_Pad_TopOnly
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_2.2mm_M2_Pad
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2
+0
+1
+1
+MountingHole
+MountingHole_2.2mm_M2_Pad_TopBottom
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2
+0
+3
+1
+MountingHole
+MountingHole_2.2mm_M2_Pad_TopOnly
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2
+0
+2
+1
+MountingHole
+MountingHole_2.2mm_M2_Pad_Via
+Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2
+0
+9
+1
+MountingHole
+MountingHole_2.5mm
+Mounting Hole 2.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_2.5mm_Pad
+Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_2.5mm_Pad_TopBottom
+Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_2.5mm_Pad_TopOnly
+Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_2.5mm_Pad_Via
+Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_2.7mm
+Mounting Hole 2.7mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_2.7mm_M2.5
+Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5
+0
+0
+0
+MountingHole
+MountingHole_2.7mm_M2.5_DIN965
+Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 DIN965
+0
+0
+0
+MountingHole
+MountingHole_2.7mm_M2.5_DIN965_Pad
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 DIN965
+0
+1
+1
+MountingHole
+MountingHole_2.7mm_M2.5_DIN965_Pad_TopBottom
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 DIN965
+0
+3
+1
+MountingHole
+MountingHole_2.7mm_M2.5_DIN965_Pad_TopOnly
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 DIN965
+0
+2
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO7380
+Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_2.7mm_M2.5_ISO7380_Pad
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO7380_Pad_TopBottom
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO7380_Pad_TopOnly
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO14580
+Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_2.7mm_M2.5_ISO14580_Pad
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_2.7mm_M2.5_ISO14580_Pad_TopOnly
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_2.7mm_M2.5_Pad
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5
+0
+1
+1
+MountingHole
+MountingHole_2.7mm_M2.5_Pad_TopBottom
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5
+0
+3
+1
+MountingHole
+MountingHole_2.7mm_M2.5_Pad_TopOnly
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5
+0
+2
+1
+MountingHole
+MountingHole_2.7mm_M2.5_Pad_Via
+Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M2.5
+0
+9
+1
+MountingHole
+MountingHole_2.7mm_Pad
+Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_2.7mm_Pad_TopBottom
+Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_2.7mm_Pad_TopOnly
+Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_2.7mm_Pad_Via
+Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_2mm
+Mounting Hole 2mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_3.2mm_M3
+Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3
+0
+0
+0
+MountingHole
+MountingHole_3.2mm_M3_DIN965
+Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 DIN965
+0
+0
+0
+MountingHole
+MountingHole_3.2mm_M3_DIN965_Pad
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 DIN965
+0
+1
+1
+MountingHole
+MountingHole_3.2mm_M3_DIN965_Pad_TopBottom
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 DIN965
+0
+3
+1
+MountingHole
+MountingHole_3.2mm_M3_DIN965_Pad_TopOnly
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 DIN965
+0
+2
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO7380
+Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_3.2mm_M3_ISO7380_Pad
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO7380_Pad_TopOnly
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO14580
+Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_3.2mm_M3_ISO14580_Pad
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_3.2mm_M3_ISO14580_Pad_TopOnly
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_3.2mm_M3_Pad
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3
+0
+1
+1
+MountingHole
+MountingHole_3.2mm_M3_Pad_TopBottom
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3
+0
+3
+1
+MountingHole
+MountingHole_3.2mm_M3_Pad_TopOnly
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3
+0
+2
+1
+MountingHole
+MountingHole_3.2mm_M3_Pad_Via
+Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
+mountinghole M3
+0
+9
+1
+MountingHole
+MountingHole_3.5mm
+Mounting Hole 3.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_3.5mm_Pad
+Mounting Hole 3.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_3.5mm_Pad_TopBottom
+Mounting Hole 3.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_3.5mm_Pad_TopOnly
+Mounting Hole 3.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_3.5mm_Pad_Via
+Mounting Hole 3.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_3.7mm
+Mounting Hole 3.7mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_3.7mm_Pad
+Mounting Hole 3.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_3.7mm_Pad_TopBottom
+Mounting Hole 3.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_3.7mm_Pad_TopOnly
+Mounting Hole 3.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_3.7mm_Pad_Via
+Mounting Hole 3.7mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_3mm
+Mounting Hole 3mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_3mm_Pad
+Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_3mm_Pad_TopBottom
+Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_3mm_Pad_TopOnly
+Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_3mm_Pad_Via
+Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_4.3mm_M4
+Mounting Hole 4.3mm, M4, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4
+0
+0
+0
+MountingHole
+MountingHole_4.3mm_M4_DIN965
+Mounting Hole 4.3mm, M4, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 DIN965
+0
+0
+0
+MountingHole
+MountingHole_4.3mm_M4_DIN965_Pad
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 DIN965
+0
+1
+1
+MountingHole
+MountingHole_4.3mm_M4_DIN965_Pad_TopBottom
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 DIN965
+0
+3
+1
+MountingHole
+MountingHole_4.3mm_M4_DIN965_Pad_TopOnly
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 DIN965
+0
+2
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO7380
+Mounting Hole 4.3mm, M4, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_4.3mm_M4_ISO7380_Pad
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO7380_Pad_TopBottom
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO7380_Pad_TopOnly
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO14580
+Mounting Hole 4.3mm, M4, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_4.3mm_M4_ISO14580_Pad
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO14580_Pad_TopBottom
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_4.3mm_M4_ISO14580_Pad_TopOnly
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_4.3mm_M4_Pad
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4
+0
+1
+1
+MountingHole
+MountingHole_4.3mm_M4_Pad_TopBottom
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4
+0
+3
+1
+MountingHole
+MountingHole_4.3mm_M4_Pad_TopOnly
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4
+0
+2
+1
+MountingHole
+MountingHole_4.3mm_M4_Pad_Via
+Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py
+mountinghole M4
+0
+9
+1
+MountingHole
+MountingHole_4.3x6.2mm_M4_Pad
+Mounting Hole 4.3x6.2mm, M4
+mounting hole 4.3x6.2mm m4
+0
+1
+1
+MountingHole
+MountingHole_4.3x6.2mm_M4_Pad_Via
+Mounting Hole 4.3x6.2mm, M4
+mounting hole 4.3x6.2mm m4
+0
+17
+1
+MountingHole
+MountingHole_4.5mm
+Mounting Hole 4.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_4.5mm_Pad
+Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_4.5mm_Pad_TopBottom
+Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_4.5mm_Pad_TopOnly
+Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_4.5mm_Pad_Via
+Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_4mm
+Mounting Hole 4mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_4mm_Pad
+Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_4mm_Pad_TopBottom
+Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_4mm_Pad_TopOnly
+Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_4mm_Pad_Via
+Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_5.3mm_M5
+Mounting Hole 5.3mm, M5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5
+0
+0
+0
+MountingHole
+MountingHole_5.3mm_M5_DIN965
+Mounting Hole 5.3mm, M5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 DIN965
+0
+0
+0
+MountingHole
+MountingHole_5.3mm_M5_DIN965_Pad
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 DIN965
+0
+1
+1
+MountingHole
+MountingHole_5.3mm_M5_DIN965_Pad_TopBottom
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 DIN965
+0
+3
+1
+MountingHole
+MountingHole_5.3mm_M5_DIN965_Pad_TopOnly
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 DIN965
+0
+2
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO7380
+Mounting Hole 5.3mm, M5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_5.3mm_M5_ISO7380_Pad
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO7380_Pad_TopBottom
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO7380_Pad_TopOnly
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO14580
+Mounting Hole 5.3mm, M5, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_5.3mm_M5_ISO14580_Pad
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO14580_Pad_TopBottom
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_5.3mm_M5_ISO14580_Pad_TopOnly
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_5.3mm_M5_Pad
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5
+0
+1
+1
+MountingHole
+MountingHole_5.3mm_M5_Pad_TopBottom
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5
+0
+3
+1
+MountingHole
+MountingHole_5.3mm_M5_Pad_TopOnly
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5
+0
+2
+1
+MountingHole
+MountingHole_5.3mm_M5_Pad_Via
+Mounting Hole 5.3mm, M5, generated by kicad-footprint-generator mountinghole.py
+mountinghole M5
+0
+9
+1
+MountingHole
+MountingHole_5.5mm
+Mounting Hole 5.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_5.5mm_Pad
+Mounting Hole 5.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_5.5mm_Pad_TopBottom
+Mounting Hole 5.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_5.5mm_Pad_TopOnly
+Mounting Hole 5.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_5.5mm_Pad_Via
+Mounting Hole 5.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_5mm
+Mounting Hole 5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_5mm_Pad
+Mounting Hole 5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_5mm_Pad_TopBottom
+Mounting Hole 5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_5mm_Pad_TopOnly
+Mounting Hole 5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_5mm_Pad_Via
+Mounting Hole 5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_6.4mm_M6
+Mounting Hole 6.4mm, M6, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6
+0
+0
+0
+MountingHole
+MountingHole_6.4mm_M6_DIN965
+Mounting Hole 6.4mm, M6, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 DIN965
+0
+0
+0
+MountingHole
+MountingHole_6.4mm_M6_DIN965_Pad
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 DIN965
+0
+1
+1
+MountingHole
+MountingHole_6.4mm_M6_DIN965_Pad_TopBottom
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 DIN965
+0
+3
+1
+MountingHole
+MountingHole_6.4mm_M6_DIN965_Pad_TopOnly
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 DIN965
+0
+2
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO7380
+Mounting Hole 6.4mm, M6, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO7380
+0
+0
+0
+MountingHole
+MountingHole_6.4mm_M6_ISO7380_Pad
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO7380
+0
+1
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO7380_Pad_TopBottom
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO7380
+0
+3
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO7380_Pad_TopOnly
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO7380
+0
+2
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO14580
+Mounting Hole 6.4mm, M6, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO14580
+0
+0
+0
+MountingHole
+MountingHole_6.4mm_M6_ISO14580_Pad
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO14580
+0
+1
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO14580_Pad_TopBottom
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO14580
+0
+3
+1
+MountingHole
+MountingHole_6.4mm_M6_ISO14580_Pad_TopOnly
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6 ISO14580
+0
+2
+1
+MountingHole
+MountingHole_6.4mm_M6_Pad
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6
+0
+1
+1
+MountingHole
+MountingHole_6.4mm_M6_Pad_TopBottom
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6
+0
+3
+1
+MountingHole
+MountingHole_6.4mm_M6_Pad_TopOnly
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6
+0
+2
+1
+MountingHole
+MountingHole_6.4mm_M6_Pad_Via
+Mounting Hole 6.4mm, M6, generated by kicad-footprint-generator mountinghole.py
+mountinghole M6
+0
+9
+1
+MountingHole
+MountingHole_6.5mm
+Mounting Hole 6.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_6.5mm_Pad
+Mounting Hole 6.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_6.5mm_Pad_TopBottom
+Mounting Hole 6.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_6.5mm_Pad_TopOnly
+Mounting Hole 6.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_6.5mm_Pad_Via
+Mounting Hole 6.5mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_6mm
+Mounting Hole 6mm, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+0
+0
+MountingHole
+MountingHole_6mm_Pad
+Mounting Hole 6mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+1
+1
+MountingHole
+MountingHole_6mm_Pad_TopBottom
+Mounting Hole 6mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+3
+1
+MountingHole
+MountingHole_6mm_Pad_TopOnly
+Mounting Hole 6mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+2
+1
+MountingHole
+MountingHole_6mm_Pad_Via
+Mounting Hole 6mm, generated by kicad-footprint-generator mountinghole.py
+mountinghole
+0
+9
+1
+MountingHole
+MountingHole_8.4mm_M8
+Mounting Hole 8.4mm, M8, no annular, generated by kicad-footprint-generator mountinghole.py
+mountinghole M8
+0
+0
+0
+MountingHole
+MountingHole_8.4mm_M8_Pad
+Mounting Hole 8.4mm, M8, generated by kicad-footprint-generator mountinghole.py
+mountinghole M8
+0
+1
+1
+MountingHole
+MountingHole_8.4mm_M8_Pad_TopBottom
+Mounting Hole 8.4mm, M8, generated by kicad-footprint-generator mountinghole.py
+mountinghole M8
+0
+3
+1
+MountingHole
+MountingHole_8.4mm_M8_Pad_TopOnly
+Mounting Hole 8.4mm, M8, generated by kicad-footprint-generator mountinghole.py
+mountinghole M8
+0
+2
+1
+MountingHole
+MountingHole_8.4mm_M8_Pad_Via
+Mounting Hole 8.4mm, M8, generated by kicad-footprint-generator mountinghole.py
+mountinghole M8
+0
+9
+1
+MountingHole
+ToolingHole_1.152mm
+Tooling Hole 1.152mm, 1.3mm solder mask, JLCPCB specification, https://jlcpcb.com/help/article/How-to-add-tooling-holes-for-PCB-assembly-order
+mounting
+0
+0
+0
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H5mm_9771050360
+Mounting Hardware, external M3, height 5, Wuerth electronics 9771050360 (https://katalog.we-online.com/em/datasheet/9771050360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771050360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H6mm_9771060360
+Mounting Hardware, external M3, height 6, Wuerth electronics 9771060360 (https://katalog.we-online.com/em/datasheet/9771060360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771060360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H7mm_9771070360
+Mounting Hardware, external M3, height 7, Wuerth electronics 9771070360 (https://katalog.we-online.com/em/datasheet/9771070360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771070360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H8mm_9771080360
+Mounting Hardware, external M3, height 8, Wuerth electronics 9771080360 (https://katalog.we-online.com/em/datasheet/9771080360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771080360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H9mm_9771090360
+Mounting Hardware, external M3, height 9, Wuerth electronics 9771090360 (https://katalog.we-online.com/em/datasheet/9771090360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771090360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H10mm_9771100360
+Mounting Hardware, external M3, height 10, Wuerth electronics 9771100360 (https://katalog.we-online.com/em/datasheet/9771100360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771100360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H11mm_9771110360
+Mounting Hardware, external M3, height 11, Wuerth electronics 9771110360 (https://katalog.we-online.com/em/datasheet/9771110360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771110360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H12mm_9771120360
+Mounting Hardware, external M3, height 12, Wuerth electronics 9771120360 (https://katalog.we-online.com/em/datasheet/9771120360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771120360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H13mm_9771130360
+Mounting Hardware, external M3, height 13, Wuerth electronics 9771130360 (https://katalog.we-online.com/em/datasheet/9771130360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771130360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H14mm_9771140360
+Mounting Hardware, external M3, height 14, Wuerth electronics 9771140360 (https://katalog.we-online.com/em/datasheet/9771140360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771140360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSE-ExternalM3_H15mm_9771150360
+Mounting Hardware, external M3, height 15, Wuerth electronics 9771150360 (https://katalog.we-online.com/em/datasheet/9771150360.pdf), generated with kicad-footprint-generator
+Mounting M3 9771150360
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H1mm_9774010482
+Mounting Hardware, inside through hole 4.5mm, height 1, Wuerth electronics 9774010482 (https://katalog.we-online.de/em/datasheet/9774010482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774010482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H2mm_9774020482
+Mounting Hardware, inside through hole 4.5mm, height 2, Wuerth electronics 9774020482 (https://katalog.we-online.de/em/datasheet/9774020482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774020482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H3mm_9774030482
+Mounting Hardware, inside through hole 4.5mm, height 3, Wuerth electronics 9774030482 (https://katalog.we-online.de/em/datasheet/9774030482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774030482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H4mm_9774040482
+Mounting Hardware, inside through hole 4.5mm, height 4, Wuerth electronics 9774040482 (https://katalog.we-online.de/em/datasheet/9774040482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774040482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H5mm_9774050482
+Mounting Hardware, inside through hole 4.5mm, height 5, Wuerth electronics 9774050482 (https://katalog.we-online.de/em/datasheet/9774050482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774050482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H6mm_9774060482
+Mounting Hardware, inside through hole 4.5mm, height 6, Wuerth electronics 9774060482 (https://katalog.we-online.de/em/datasheet/9774060482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774060482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H7mm_9774070482
+Mounting Hardware, inside through hole 4.5mm, height 7, Wuerth electronics 9774070482 (https://katalog.we-online.de/em/datasheet/9774070482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774070482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H8mm_9774080482
+Mounting Hardware, inside through hole 4.5mm, height 8, Wuerth electronics 9774080482 (https://katalog.we-online.de/em/datasheet/9774080482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774080482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H9mm_9774090482
+Mounting Hardware, inside through hole 4.5mm, height 9, Wuerth electronics 9774090482 (https://katalog.we-online.de/em/datasheet/9774090482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774090482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-4.5mm_H10mm_9774100482
+Mounting Hardware, inside through hole 4.5mm, height 10, Wuerth electronics 9774100482 (https://katalog.we-online.de/em/datasheet/9774100482.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774100482
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H1.5mm_9774015633
+Mounting Hardware, inside through hole M1.6, height 1.5, Wuerth electronics 9774015633 (https://katalog.we-online.com/em/datasheet/9774015633.pdf), generated with kicad-footprint-generator
+Mounting M1.6 9774015633
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H1mm_9774010633
+Mounting Hardware, inside through hole M1.6, height 1, Wuerth electronics 9774010633 (https://katalog.we-online.com/em/datasheet/9774010633.pdf), generated with kicad-footprint-generator
+Mounting M1.6 9774010633
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_9774025633
+Mounting Hardware, inside through hole M1.6, height 2.5, Wuerth electronics 9774025633 (https://katalog.we-online.com/em/datasheet/9774025633.pdf), generated with kicad-footprint-generator
+Mounting M1.6 9774025633
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_ThreadDepth1.5mm_97730256332
+Mounting Hardware, inside blind hole M1.6, height 2.5, Wuerth electronics 97730256332 (https://katalog.we-online.com/em/datasheet/97730256332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730256332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_ThreadDepth1.5mm_NoNPTH_97730256330
+Mounting Hardware, inside blind hole M1.6, height 2.5, Wuerth electronics 97730256330 (https://katalog.we-online.com/em/datasheet/97730256330R.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730256330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H2mm_9774020633
+Mounting Hardware, inside through hole M1.6, height 2, Wuerth electronics 9774020633 (https://katalog.we-online.com/em/datasheet/9774020633.pdf), generated with kicad-footprint-generator
+Mounting M1.6 9774020633
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_97730356332
+Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356332 (https://katalog.we-online.com/em/datasheet/97730356332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730356332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_97730356334
+Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356334 (https://katalog.we-online.com/em/datasheet/97730356334.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730356334
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_NoNPTH_97730356330
+Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356330 (https://katalog.we-online.com/em/datasheet/97730356330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730356330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3mm_9774030633
+Mounting Hardware, inside through hole M1.6, height 3, Wuerth electronics 9774030633 (https://katalog.we-online.com/em/datasheet/9774030633.pdf), generated with kicad-footprint-generator
+Mounting M1.6 9774030633
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3mm_ThreadDepth1.8mm_97730306332
+Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 97730306332 (https://katalog.we-online.com/em/datasheet/97730306332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730306332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H3mm_ThreadDepth1.8mm_NoNPTH_97730306330
+Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 97730306330 (https://katalog.we-online.com/em/datasheet/97730306330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730306330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_97730456332
+Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456332 (https://katalog.we-online.com/em/datasheet/97730456332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730456332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_97730456334
+Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456334 (https://katalog.we-online.com/em/datasheet/97730456334.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730456334
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_NoNPTH_97730456330
+Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456330 (https://katalog.we-online.com/em/datasheet/97730456330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730456330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_97730406332
+Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406332 (https://katalog.we-online.com/em/datasheet/97730406332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730406332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_97730406334
+Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406334 (https://katalog.we-online.com/em/datasheet/97730406334.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730406334
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_NoNPTH_97730406330
+Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406330 (https://katalog.we-online.com/em/datasheet/97730406330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730406330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_97730506332
+Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506332 (https://katalog.we-online.com/em/datasheet/97730506332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730506332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_97730506334
+Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506334 (https://katalog.we-online.com/em/datasheet/97730506334.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730506334
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_NoNPTH_97730506330
+Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506330 (https://katalog.we-online.com/em/datasheet/97730506330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730506330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_97730606332
+Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606332 (https://katalog.we-online.com/em/datasheet/97730606332.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730606332
+0
+6
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_97730606334
+Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606334 (https://katalog.we-online.com/em/datasheet/97730606334.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730606334
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_NoNPTH_97730606330
+Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606330 (https://katalog.we-online.com/em/datasheet/97730606330.pdf), generated with kicad-footprint-generator
+Mounting M1.6 97730606330
+0
+5
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H0.5mm_9774005151R
+Mounting Hardware, inside through hole M2.5, height 0.5, Wuerth electronics 9774005151R (https://www.we-online.com/components/products/datasheet/9774005151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774005151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H1.5mm_9774015151R
+Mounting Hardware, inside through hole M2.5, height 1.5, Wuerth electronics 9774015151R (https://www.we-online.com/components/products/datasheet/9774015151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774015151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H1mm_9774010151R
+Mounting Hardware, inside through hole M2.5, height 1, Wuerth electronics 9774010151R (https://www.we-online.com/components/products/datasheet/9774010151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774010151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H2.5mm_9774025151R
+Mounting Hardware, inside through hole M2.5, height 2.5, Wuerth electronics 9774025151R (https://www.we-online.com/components/products/datasheet/9774025151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774025151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H2.7mm_9774027151R
+Mounting Hardware, inside through hole M2.5, height 2.7, Wuerth electronics 9774027151R (https://www.we-online.com/components/products/datasheet/9774027151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774027151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H2mm_9774020151R
+Mounting Hardware, inside through hole M2.5, height 2, Wuerth electronics 9774020151R (https://www.we-online.com/components/products/datasheet/9774020151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774020151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H3.5mm_9774035151R
+Mounting Hardware, inside through hole M2.5, height 3.5, Wuerth electronics 9774035151R (https://www.we-online.com/components/products/datasheet/9774035151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774035151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H3mm_9774030151R
+Mounting Hardware, inside through hole M2.5, height 3, Wuerth electronics 9774030151R (https://www.we-online.com/components/products/datasheet/9774030151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774030151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H4.5mm_9774045151R
+Mounting Hardware, inside through hole M2.5, height 4.5, Wuerth electronics 9774045151R (https://www.we-online.com/components/products/datasheet/9774045151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774045151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H4mm_9774040151R
+Mounting Hardware, inside through hole M2.5, height 4, Wuerth electronics 9774040151R (https://www.we-online.com/components/products/datasheet/9774040151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774040151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H5.5mm_9774055151R
+Mounting Hardware, inside through hole M2.5, height 5.5, Wuerth electronics 9774055151R (https://www.we-online.com/components/products/datasheet/9774055151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774055151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H5mm_9774050151R
+Mounting Hardware, inside through hole M2.5, height 5, Wuerth electronics 9774050151R (https://www.we-online.com/components/products/datasheet/9774050151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774050151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H6.5mm_9774065151R
+Mounting Hardware, inside through hole M2.5, height 6.5, Wuerth electronics 9774065151R (https://www.we-online.com/components/products/datasheet/9774065151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774065151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H6mm_9774060151R
+Mounting Hardware, inside through hole M2.5, height 6, Wuerth electronics 9774060151R (https://www.we-online.com/components/products/datasheet/9774060151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774060151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H7.5mm_9774075151R
+Mounting Hardware, inside through hole M2.5, height 7.5, Wuerth electronics 9774075151R (https://www.we-online.com/components/products/datasheet/9774075151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774075151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H7mm_9774070151R
+Mounting Hardware, inside through hole M2.5, height 7, Wuerth electronics 9774070151R (https://www.we-online.com/components/products/datasheet/9774070151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774070151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H8.5mm_9774085151R
+Mounting Hardware, inside through hole M2.5, height 8.5, Wuerth electronics 9774085151R (https://www.we-online.com/components/products/datasheet/9774085151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774085151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H8mm_9774080151R
+Mounting Hardware, inside through hole M2.5, height 8, Wuerth electronics 9774080151R (https://www.we-online.com/components/products/datasheet/9774080151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774080151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H9.5mm_9774095151R
+Mounting Hardware, inside through hole M2.5, height 9.5, Wuerth electronics 9774095151R (https://www.we-online.com/components/products/datasheet/9774095151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774095151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H9mm_9774090151R
+Mounting Hardware, inside through hole M2.5, height 9, Wuerth electronics 9774090151R (https://www.we-online.com/components/products/datasheet/9774090151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774090151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2.5_H10mm_9774100151R
+Mounting Hardware, inside through hole M2.5, height 10, Wuerth electronics 9774100151R (https://www.we-online.com/components/products/datasheet/9774100151R.pdf), generated with kicad-footprint-generator
+Mounting M2.5 9774100151R
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H1.5mm_9774015243
+Mounting Hardware, inside through hole M2, height 1.5, Wuerth electronics 9774015243 (https://katalog.we-online.de/em/datasheet/9774015243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774015243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H1mm_9774010243
+Mounting Hardware, inside through hole M2, height 1, Wuerth electronics 9774010243 (https://katalog.we-online.de/em/datasheet/9774010243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774010243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H2.5mm_9774025243
+Mounting Hardware, inside through hole M2, height 2.5, Wuerth electronics 9774025243 (https://katalog.we-online.de/em/datasheet/9774025243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774025243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H2mm_9774020243
+Mounting Hardware, inside through hole M2, height 2, Wuerth electronics 9774020243 (https://katalog.we-online.de/em/datasheet/9774020243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774020243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H3.5mm_9774035243
+Mounting Hardware, inside through hole M2, height 3.5, Wuerth electronics 9774035243 (https://katalog.we-online.de/em/datasheet/9774035243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774035243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H3mm_9774030243
+Mounting Hardware, inside through hole M2, height 3, Wuerth electronics 9774030243 (https://katalog.we-online.de/em/datasheet/9774030243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774030243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H4.5mm_9774045243
+Mounting Hardware, inside through hole M2, height 4.5, Wuerth electronics 9774045243 (https://katalog.we-online.de/em/datasheet/9774045243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774045243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H4mm_9774040243
+Mounting Hardware, inside through hole M2, height 4, Wuerth electronics 9774040243 (https://katalog.we-online.de/em/datasheet/9774040243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774040243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H5mm_9774050243
+Mounting Hardware, inside through hole M2, height 5, Wuerth electronics 9774050243 (https://katalog.we-online.de/em/datasheet/9774050243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774050243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H6mm_9774060243
+Mounting Hardware, inside through hole M2, height 6, Wuerth electronics 9774060243 (https://katalog.we-online.de/em/datasheet/9774060243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774060243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H7mm_9774070243
+Mounting Hardware, inside through hole M2, height 7, Wuerth electronics 9774070243 (https://katalog.we-online.de/em/datasheet/9774070243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774070243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M2_H8mm_9774080243
+Mounting Hardware, inside through hole M2, height 8, Wuerth electronics 9774080243 (https://katalog.we-online.de/em/datasheet/9774080243.pdf), generated with kicad-footprint-generator
+Mounting M2 9774080243
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H1.5mm_9774015360
+Mounting Hardware, inside through hole M3, height 1.5, Wuerth electronics 9774015360 (https://katalog.we-online.de/em/datasheet/9774015360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774015360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H1mm_9774010360
+Mounting Hardware, inside through hole M3, height 1, Wuerth electronics 9774010360 (https://katalog.we-online.de/em/datasheet/9774010360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774010360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H2.5mm_9774025360
+Mounting Hardware, inside through hole M3, height 2.5, Wuerth electronics 9774025360 (https://katalog.we-online.de/em/datasheet/9774025360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774025360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H2mm_9774020360
+Mounting Hardware, inside through hole M3, height 2, Wuerth electronics 9774020360 (https://katalog.we-online.de/em/datasheet/9774020360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774020360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H3mm_9774030360
+Mounting Hardware, inside through hole M3, height 3, Wuerth electronics 9774030360 (https://katalog.we-online.de/em/datasheet/9774030360R.pdf), generated with kicad-footprint-generator
+Mounting M3 9774030360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H4mm_9774040360
+Mounting Hardware, inside through hole M3, height 4, Wuerth electronics 9774040360 (https://katalog.we-online.de/em/datasheet/9774040360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774040360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H5mm_9774050360
+Mounting Hardware, inside through hole M3, height 5, Wuerth electronics 9774050360 (https://katalog.we-online.de/em/datasheet/9774050360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774050360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H6mm_9774060360
+Mounting Hardware, inside through hole M3, height 6, Wuerth electronics 9774060360 (https://katalog.we-online.de/em/datasheet/9774060360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774060360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H7mm_9774070360
+Mounting Hardware, inside through hole M3, height 7, Wuerth electronics 9774070360 (https://katalog.we-online.de/em/datasheet/9774070360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774070360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H8mm_9774080360
+Mounting Hardware, inside through hole M3, height 8, Wuerth electronics 9774080360 (https://katalog.we-online.de/em/datasheet/9774080360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774080360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H9mm_9774090360
+Mounting Hardware, inside through hole M3, height 9, Wuerth electronics 9774090360 (https://katalog.we-online.de/em/datasheet/9774090360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774090360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H10mm_9774100360
+Mounting Hardware, inside through hole M3, height 10, Wuerth electronics 9774100360 (https://katalog.we-online.de/em/datasheet/9774100360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774100360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H11mm_9774110360
+Mounting Hardware, inside through hole M3, height 11, Wuerth electronics 9774110360 (https://katalog.we-online.de/em/datasheet/9774110360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774110360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H12mm_9774120360
+Mounting Hardware, inside through hole M3, height 12, Wuerth electronics 9774120360 (https://katalog.we-online.de/em/datasheet/9774120360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774120360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H13mm_9774130360
+Mounting Hardware, inside through hole M3, height 13, Wuerth electronics 9774130360 (https://katalog.we-online.de/em/datasheet/9774130360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774130360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H14mm_9774140360
+Mounting Hardware, inside through hole M3, height 14, Wuerth electronics 9774140360 (https://katalog.we-online.de/em/datasheet/9774140360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774140360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSI-M3_H15mm_9774150360
+Mounting Hardware, inside through hole M3, height 15, Wuerth electronics 9774150360 (https://katalog.we-online.de/em/datasheet/9774150360.pdf), generated with kicad-footprint-generator
+Mounting M3 9774150360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H2.6mm_ReverseMount_9775026960
+Mounting Hardware, inside through hole 3.2mm, height 2.6, Wuerth electronics 9775026960 (https://katalog.we-online.com/em/datasheet/9775026960R.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775026960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H3.1mm_ReverseMount_9775031960
+Mounting Hardware, inside through hole 3.2mm, height 3.1, Wuerth electronics 9775031960 (https://katalog.we-online.com/em/datasheet/9775031960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775031960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H3.6mm_ReverseMount_9775036960
+Mounting Hardware, inside through hole 3.2mm, height 3.6, Wuerth electronics 9775036960 (https://katalog.we-online.com/em/datasheet/9775036960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775036960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H4.1mm_ReverseMount_9775041960
+Mounting Hardware, inside through hole 3.2mm, height 4.1, Wuerth electronics 9775041960 (https://katalog.we-online.com/em/datasheet/9775041960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775041960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H4.6mm_ReverseMount_9775046960
+Mounting Hardware, inside through hole 3.2mm, height 4.6, Wuerth electronics 9775046960 (https://katalog.we-online.com/em/datasheet/9775046960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775046960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H5.1mm_ReverseMount_9775051960
+Mounting Hardware, inside through hole 3.2mm, height 5.1, Wuerth electronics 9775051960 (https://katalog.we-online.com/em/datasheet/9775051960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775051960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H5.6mm_ReverseMount_9775056960
+Mounting Hardware, inside through hole 3.2mm, height 5.6, Wuerth electronics 9775056960 (https://katalog.we-online.com/em/datasheet/9775056960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775056960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H6.6mm_ReverseMount_9775066960
+Mounting Hardware, inside through hole 3.2mm, height 6.6, Wuerth electronics 9775066960 (https://katalog.we-online.com/em/datasheet/9775066960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775066960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H7.6mm_ReverseMount_9775076960
+Mounting Hardware, inside through hole 3.2mm, height 7.6, Wuerth electronics 9775076960 (https://katalog.we-online.com/em/datasheet/9775076960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775076960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H8.6mm_ReverseMount_9775086960
+Mounting Hardware, inside through hole 3.2mm, height 8.6, Wuerth electronics 9775086960 (https://katalog.we-online.com/em/datasheet/9775086960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775086960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H9.6mm_ReverseMount_9775096960
+Mounting Hardware, inside through hole 3.2mm, height 9.6, Wuerth electronics 9775096960 (https://katalog.we-online.com/em/datasheet/9775096960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775096960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H10.6mm_ReverseMount_9775106960
+Mounting Hardware, inside through hole 3.2mm, height 10.6, Wuerth electronics 9775106960 (https://katalog.we-online.com/em/datasheet/9775106960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775106960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-3.2mm_H11.6mm_ReverseMount_9775116960
+Mounting Hardware, inside through hole 3.2mm, height 11.6, Wuerth electronics 9775116960 (https://katalog.we-online.com/em/datasheet/9775116960.pdf), generated with kicad-footprint-generator
+Mounting 3.2mm 9775116960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H2.6mm_ReverseMount_9775026360
+Mounting Hardware, inside through hole M3, height 2.6, Wuerth electronics 9775026360 (https://katalog.we-online.com/em/datasheet/9775026360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775026360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H3.1mm_ReverseMount_9775031360
+Mounting Hardware, inside through hole M3, height 3.1, Wuerth electronics 9775031360 (https://katalog.we-online.com/em/datasheet/9775031360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775031360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H3.6mm_ReverseMount_9775036360
+Mounting Hardware, inside through hole M3, height 3.6, Wuerth electronics 9775036360 (https://katalog.we-online.com/em/datasheet/9775036360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775036360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H4.1mm_ReverseMount_9775041360
+Mounting Hardware, inside through hole M3, height 4.1, Wuerth electronics 9775041360 (https://katalog.we-online.com/em/datasheet/9775041360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775041360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H4.6mm_ReverseMount_9775046360
+Mounting Hardware, inside through hole M3, height 4.6, Wuerth electronics 9775046360 (https://katalog.we-online.com/em/datasheet/9775046360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775046360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H5.1mm_ReverseMount_9775051360
+Mounting Hardware, inside through hole M3, height 5.1, Wuerth electronics 9775051360 (https://katalog.we-online.com/em/datasheet/9775051360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775051360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H5.6mm_ReverseMount_9775056360
+Mounting Hardware, inside through hole M3, height 5.6, Wuerth electronics 9775056360 (https://katalog.we-online.com/em/datasheet/9775056360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775056360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H6.6mm_ReverseMount_9775066360
+Mounting Hardware, inside through hole M3, height 6.6, Wuerth electronics 9775066360 (https://katalog.we-online.com/em/datasheet/9775066360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775066360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H7.6mm_ReverseMount_9775076360
+Mounting Hardware, inside through hole M3, height 7.6, Wuerth electronics 9775076360 (https://katalog.we-online.com/em/datasheet/9775076360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775076360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H8.6mm_ReverseMount_9775086360
+Mounting Hardware, inside through hole M3, height 8.6, Wuerth electronics 9775086360 (https://katalog.we-online.com/em/datasheet/9775086360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775086360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H9.6mm_ReverseMount_9775096360
+Mounting Hardware, inside through hole M3, height 9.6, Wuerth electronics 9775096360 (https://katalog.we-online.com/em/datasheet/9775096360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775096360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H10.6mm_ReverseMount_9775106360
+Mounting Hardware, inside through hole M3, height 10.6, Wuerth electronics 9775106360 (https://katalog.we-online.com/em/datasheet/9775106360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775106360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSR-M3_H11.6mm_ReverseMount_9775116360
+Mounting Hardware, inside through hole M3, height 11.6, Wuerth electronics 9775116360 (https://katalog.we-online.com/em/datasheet/9775116360.pdf), generated with kicad-footprint-generator
+Mounting M3 9775116360
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H2.5mm_SnapRivet_9776025960
+Mounting Hardware, inside through hole 3.3mm, height 2.5, Wuerth electronics 9776025960 (https://katalog.we-online.com/em/datasheet/9776025960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776025960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H2mm_SnapRivet_9776020960
+Mounting Hardware, inside through hole 3.3mm, height 2, Wuerth electronics 9776020960 (https://katalog.we-online.com/em/datasheet/9776020960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776020960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H3mm_SnapRivet_9776030960
+Mounting Hardware, inside through hole 3.3mm, height 3, Wuerth electronics 9776030960 (https://katalog.we-online.com/em/datasheet/9776030960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776030960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H4mm_SnapRivet_9776040960
+Mounting Hardware, inside through hole 3.3mm, height 4, Wuerth electronics 9776040960 (https://katalog.we-online.com/em/datasheet/9776040960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776040960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H5mm_SnapRivet_9776050960
+Mounting Hardware, inside through hole 3.3mm, height 5, Wuerth electronics 9776050960 (https://katalog.we-online.com/em/datasheet/9776050960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776050960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H6mm_SnapRivet_9776060960
+Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9776060960 (https://katalog.we-online.com/em/datasheet/9776060960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776060960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H7mm_SnapRivet_9776070960
+Mounting Hardware, inside through hole 3.3mm, height 7, Wuerth electronics 9776070960 (https://katalog.we-online.com/em/datasheet/9776070960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776070960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H8mm_SnapRivet_9776080960
+Mounting Hardware, inside through hole 3.3mm, height 8, Wuerth electronics 9776080960 (https://katalog.we-online.com/em/datasheet/9776080960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776080960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H9mm_SnapRivet_9776090960
+Mounting Hardware, inside through hole 3.3mm, height 9, Wuerth electronics 9776090960 (https://katalog.we-online.com/em/datasheet/9776090960.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776090960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMSSR-3.3mm_H10mm_SnapRivet_9776100960
+Mounting Hardware, inside through hole 3.3mm, height 10, Wuerth electronics 9776100960 (https://katalog.we-online.com/em/datasheet/9776100960R.pdf), generated with kicad-footprint-generator
+Mounting 3.3mm 9776100960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H1.5mm_9774015951
+Mounting Hardware, inside through hole 2.7mm, height 1.5, Wuerth electronics 9774015951 (https://katalog.we-online.de/em/datasheet/9774015951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774015951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H1mm_9774010951
+Mounting Hardware, inside through hole 2.7mm, height 1, Wuerth electronics 9774010951 (https://katalog.we-online.de/em/datasheet/9774010951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774010951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H2.5mm_9774025951
+Mounting Hardware, inside through hole 2.7mm, height 2.5, Wuerth electronics 9774025951 (https://katalog.we-online.de/em/datasheet/9774025951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774025951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H2mm_9774020951
+Mounting Hardware, inside through hole 2.7mm, height 2, Wuerth electronics 9774020951 (https://katalog.we-online.de/em/datasheet/9774020951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774020951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H3mm_9774030951
+Mounting Hardware, inside through hole 2.7mm, height 3, Wuerth electronics 9774030951 (https://katalog.we-online.de/em/datasheet/9774030951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774030951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H4mm_9774040951
+Mounting Hardware, inside through hole 2.7mm, height 4, Wuerth electronics 9774040951 (https://katalog.we-online.de/em/datasheet/9774040951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774040951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H5.5mm_9774055951
+Mounting Hardware, inside through hole 2.7mm, height 5.5, Wuerth electronics 9774055951 (https://katalog.we-online.de/em/datasheet/9774055951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774055951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H5mm_9774050951
+Mounting Hardware, inside through hole 2.7mm, height 5, Wuerth electronics 9774050951 (https://katalog.we-online.de/em/datasheet/9774050951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774050951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H6.5mm_9774065951
+Mounting Hardware, inside through hole 2.7mm, height 6.5, Wuerth electronics 9774065951 (https://katalog.we-online.de/em/datasheet/9774065951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774065951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H6mm_9774060951
+Mounting Hardware, inside through hole 2.7mm, height 6, Wuerth electronics 9774060951 (https://katalog.we-online.de/em/datasheet/9774060951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774060951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H7mm_9774070951
+Mounting Hardware, inside through hole 2.7mm, height 7, Wuerth electronics 9774070951 (https://katalog.we-online.de/em/datasheet/9774070951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774070951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H8mm_9774080951
+Mounting Hardware, inside through hole 2.7mm, height 8, Wuerth electronics 9774080951 (https://katalog.we-online.de/em/datasheet/9774080951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774080951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H9mm_9774090951
+Mounting Hardware, inside through hole 2.7mm, height 9, Wuerth electronics 9774090951 (https://katalog.we-online.de/em/datasheet/9774090951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774090951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.7mm_H10mm_9774100951
+Mounting Hardware, inside through hole 2.7mm, height 10, Wuerth electronics 9774100951 (https://katalog.we-online.de/em/datasheet/9774100951.pdf), generated with kicad-footprint-generator
+Mounting 2.7mm 9774100951
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H1.5mm_9774015943
+Mounting Hardware, inside through hole 2.25mm, height 1.5, Wuerth electronics 9774015943 (https://katalog.we-online.de/em/datasheet/9774015943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774015943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H1mm_9774010943
+Mounting Hardware, inside through hole 2.25mm, height 1, Wuerth electronics 9774010943 (https://katalog.we-online.de/em/datasheet/9774010943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774010943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H2.5mm_9774025943
+Mounting Hardware, inside through hole 2.25mm, height 2.5, Wuerth electronics 9774025943 (https://katalog.we-online.de/em/datasheet/9774025943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774025943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H2mm_9774020943
+Mounting Hardware, inside through hole 2.25mm, height 2, Wuerth electronics 9774020943 (https://katalog.we-online.de/em/datasheet/9774020943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774020943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H3.5mm_9774035943
+Mounting Hardware, inside through hole 2.25mm, height 3.5, Wuerth electronics 9774035943 (https://katalog.we-online.de/em/datasheet/9774035943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774035943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H3mm_9774030943
+Mounting Hardware, inside through hole 2.25mm, height 3, Wuerth electronics 9774030943 (https://katalog.we-online.de/em/datasheet/9774030943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774030943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H4.5mm_9774045943
+Mounting Hardware, inside through hole 2.25mm, height 4.5, Wuerth electronics 9774045943 (https://katalog.we-online.de/em/datasheet/9774045943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774045943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H4mm_9774040943
+Mounting Hardware, inside through hole 2.25mm, height 4, Wuerth electronics 9774040943 (https://katalog.we-online.de/em/datasheet/9774040943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774040943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H5mm_9774050943
+Mounting Hardware, inside through hole 2.25mm, height 5, Wuerth electronics 9774050943 (https://katalog.we-online.de/em/datasheet/9774050943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774050943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H6mm_9774060943
+Mounting Hardware, inside through hole 2.25mm, height 6, Wuerth electronics 9774060943 (https://katalog.we-online.de/em/datasheet/9774060943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774060943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H7mm_9774070943
+Mounting Hardware, inside through hole 2.25mm, height 7, Wuerth electronics 9774070943 (https://katalog.we-online.de/em/datasheet/9774070943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774070943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-2.25mm_H8mm_9774080943
+Mounting Hardware, inside through hole 2.25mm, height 8, Wuerth electronics 9774080943 (https://katalog.we-online.de/em/datasheet/9774080943.pdf), generated with kicad-footprint-generator
+Mounting 2.25mm 9774080943
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H1.5mm_9774015960
+Mounting Hardware, inside through hole 3.3mm, height 1.5, Wuerth electronics 9774015960 (https://katalog.we-online.de/em/datasheet/9774015960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774015960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H1mm_9774010960
+Mounting Hardware, inside through hole 3.3mm, height 1, Wuerth electronics 9774010960 (https://katalog.we-online.de/em/datasheet/9774010960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774010960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H2.5mm_9774025960
+Mounting Hardware, inside through hole 3.3mm, height 2.5, Wuerth electronics 9774025960 (https://katalog.we-online.de/em/datasheet/9774025960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774025960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H2mm_9774020960
+Mounting Hardware, inside through hole 3.3mm, height 2, Wuerth electronics 9774020960 (https://katalog.we-online.de/em/datasheet/9774020960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774020960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H3mm_9774030960
+Mounting Hardware, inside through hole 3.3mm, height 3, Wuerth electronics 9774030960 (https://katalog.we-online.de/em/datasheet/9774030960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774030960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H4mm_9774040960
+Mounting Hardware, inside through hole 3.3mm, height 4, Wuerth electronics 9774040960 (https://katalog.we-online.de/em/datasheet/9774040960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774040960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H5mm_9774050960
+Mounting Hardware, inside through hole 3.3mm, height 5, Wuerth electronics 9774050960 (https://katalog.we-online.de/em/datasheet/9774050960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774050960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H6mm_9774060960
+Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9774060960 (https://katalog.we-online.de/em/datasheet/9774060960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774060960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H7mm_9774070960
+Mounting Hardware, inside through hole 3.3mm, height 7, Wuerth electronics 9774070960 (https://katalog.we-online.de/em/datasheet/9774070960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774070960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H8mm_9774080960
+Mounting Hardware, inside through hole 3.3mm, height 8, Wuerth electronics 9774080960 (https://katalog.we-online.de/em/datasheet/9774080960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774080960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H9mm_9774090960
+Mounting Hardware, inside through hole 3.3mm, height 9, Wuerth electronics 9774090960 (https://katalog.we-online.de/em/datasheet/9774090960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774090960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H10mm_9774100960
+Mounting Hardware, inside through hole 3.3mm, height 10, Wuerth electronics 9774100960 (https://katalog.we-online.de/em/datasheet/9774100960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774100960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H11mm_9774110960
+Mounting Hardware, inside through hole 3.3mm, height 11, Wuerth electronics 9774110960 (https://katalog.we-online.de/em/datasheet/9774110960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774110960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H12mm_9774120960
+Mounting Hardware, inside through hole 3.3mm, height 12, Wuerth electronics 9774120960 (https://katalog.we-online.de/em/datasheet/9774120960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774120960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H13mm_9774130960
+Mounting Hardware, inside through hole 3.3mm, height 13, Wuerth electronics 9774130960 (https://katalog.we-online.de/em/datasheet/9774130960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774130960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H14mm_9774140960
+Mounting Hardware, inside through hole 3.3mm, height 14, Wuerth electronics 9774140960 (https://katalog.we-online.de/em/datasheet/9774140960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774140960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-3.3mm_H15mm_9774150960
+Mounting Hardware, inside through hole 3.3mm, height 15, Wuerth electronics 9774150960 (https://katalog.we-online.de/em/datasheet/9774150960.pdf,), generated with kicad-footprint-generator
+Mounting 3.3mm 9774150960
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H1mm_9774010982
+Mounting Hardware, inside through hole 4.5mm, height 1, Wuerth electronics 9774010982 (https://katalog.we-online.de/em/datasheet/9774010982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774010982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H2mm_9774020982
+Mounting Hardware, inside through hole 4.5mm, height 2, Wuerth electronics 9774020982 (https://katalog.we-online.de/em/datasheet/9774020982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774020982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H3mm_9774030982
+Mounting Hardware, inside through hole 4.5mm, height 3, Wuerth electronics 9774030982 (https://katalog.we-online.de/em/datasheet/9774030982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774030982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H4mm_9774040982
+Mounting Hardware, inside through hole 4.5mm, height 4, Wuerth electronics 9774040982 (https://katalog.we-online.de/em/datasheet/9774040982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774040982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H5mm_9774050982
+Mounting Hardware, inside through hole 4.5mm, height 5, Wuerth electronics 9774050982 (https://katalog.we-online.de/em/datasheet/9774050982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774050982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H6mm_9774060982
+Mounting Hardware, inside through hole 4.5mm, height 6, Wuerth electronics 9774060982 (https://katalog.we-online.de/em/datasheet/9774060982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774060982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H7mm_9774070982
+Mounting Hardware, inside through hole 4.5mm, height 7, Wuerth electronics 9774070982 (https://katalog.we-online.de/em/datasheet/9774070982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774070982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H8mm_9774080982
+Mounting Hardware, inside through hole 4.5mm, height 8, Wuerth electronics 9774080982 (https://katalog.we-online.de/em/datasheet/9774080982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774080982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H9mm_9774090982
+Mounting Hardware, inside through hole 4.5mm, height 9, Wuerth electronics 9774090982 (https://katalog.we-online.de/em/datasheet/9774090982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774090982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WA-SMST-4.5mm_H10mm_9774100982
+Mounting Hardware, inside through hole 4.5mm, height 10, Wuerth electronics 9774100982 (https://katalog.we-online.de/em/datasheet/9774100982.pdf), generated with kicad-footprint-generator
+Mounting 4.5mm 9774100982
+0
+8
+1
+Mounting_Wuerth
+Mounting_Wuerth_WP-SMRA-D3.3mm_L7mm_7466300_Horizontal
+Right-angle SMD mounting hardware, inside through hole 3.3mm, lenght 7mm, total height 5mm, Würth electronics 7466300 (https://www.we-online.com/components/products/datasheet/7466300.pdf)
+screw
+0
+4
+1
+Mounting_Wuerth
+Mounting_Wuerth_WP-SMRA-M3_L7mm_7466303_Horizontal
+Right-angle SMD mounting Hardware, inside threaded M3, length 7m, total height 5mm, Würth electronics 7466303 (https://www.we-online.com/components/products/datasheet/7466303.pdf)
+threaded screw
+0
+4
+1
+NetTie
+NetTie-2_SMD_Pad0.5mm
+Net tie, 2 pin, 0.5mm square SMD pads
+net tie
+0
+2
+2
+NetTie
+NetTie-2_SMD_Pad2.0mm
+Net tie, 2 pin, 2.0mm square SMD pads
+net tie
+0
+2
+2
+NetTie
+NetTie-2_THT_Pad0.3mm
+Net tie, 2 pin, 0.3mm round THT pads
+net tie
+0
+2
+2
+NetTie
+NetTie-2_THT_Pad1.0mm
+Net tie, 2 pin, 1.0mm round THT pads
+net tie
+0
+2
+2
+NetTie
+NetTie-3_SMD_Pad0.5mm
+Net tie, 3 pin, 0.5mm square SMD pads
+net tie
+0
+3
+3
+NetTie
+NetTie-3_SMD_Pad2.0mm
+Net tie, 3 pin, 2.0mm square SMD pads
+net tie
+0
+3
+3
+NetTie
+NetTie-3_THT_Pad0.3mm
+Net tie, 3 pin, 0.3mm round THT pads
+net tie
+0
+3
+3
+NetTie
+NetTie-3_THT_Pad1.0mm
+Net tie, 3 pin, 1.0mm round THT pads
+net tie
+0
+3
+3
+NetTie
+NetTie-4_SMD_Pad0.5mm
+Net tie, 4 pin, 0.5mm square SMD pads
+net tie
+0
+4
+4
+NetTie
+NetTie-4_SMD_Pad2.0mm
+Net tie, 4 pin, 2.0mm square SMD pads
+net tie
+0
+4
+4
+NetTie
+NetTie-4_THT_Pad0.3mm
+Net tie, 4 pin, 0.3mm round THT pads
+net tie
+0
+4
+4
+NetTie
+NetTie-4_THT_Pad1.0mm
+Net tie, 4 pin, 1.0mm round THT pads
+net tie
+0
+4
+4
+OptoDevice
+ADNS-9800
+Laser Gaming Sensor ADNS-9800
+MOUSE MOUSE_SENSOR LASER_GAMING_SENSOR
+0
+16
+16
+OptoDevice
+AGILENT_HFBR-152x
+Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN)
+Fiberoptic Transmitter
+0
+6
+6
+OptoDevice
+AGILENT_HFBR-252x
+Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN)
+Fiberoptic Transmitter
+0
+6
+6
+OptoDevice
+AMS_TSL2550_SMD
+http://ams.com/eng/content/download/250130/975613/142977
+TSL2550 ambient light sensor
+0
+4
+4
+OptoDevice
+AMS_TSL25911FN
+DFN, 6 Pin (https://ams.com/documents/20143/9331680/TSL2591_DS000338_7-00.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+6
+6
+OptoDevice
+Broadcom_AFBR-16xxZ_Horizontal
+Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN
+Fiber Optic Transmitter and Receiver
+0
+6
+6
+OptoDevice
+Broadcom_AFBR-16xxZ_Tilted
+Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN
+Fiber Optic Transmitter and Receiver
+0
+6
+6
+OptoDevice
+Broadcom_AFBR-16xxZ_Vertical
+Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN
+Fiber Optic Transmitter and Receiver
+0
+6
+6
+OptoDevice
+Broadcom_APDS-9160-003
+Broadcom DFN, 8 Pin (https://docs.broadcom.com/docs/APDS-9160-003-DS)
+proximity sensor avago
+0
+8
+8
+OptoDevice
+Broadcom_APDS-9301
+ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN
+ambient light sensor chipled
+0
+6
+6
+OptoDevice
+Broadcom_DFN-6_2x2mm_P0.65mm
+Broadcom  DFN, 6 Pin (https://docs.broadcom.com/docs/AV02-4755EN), generated with kicad-footprint-generator ipc_noLead_generator.py
+Broadcom DFN NoLead
+0
+6
+6
+OptoDevice
+Broadcom_LGA-8_2x2mm_P0.5mm
+Broadcom  LGA, 8 Pin (https://docs.broadcom.com/doc/APDS-9251-001-DS#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+Broadcom LGA NoLead
+0
+8
+8
+OptoDevice
+Broadcom_LGA-8_2x2mm_P0.53mm
+Broadcom  LGA, 8 Pin (https://docs.broadcom.com/docs/AV02-4755EN), generated with kicad-footprint-generator ipc_noLead_generator.py
+Broadcom LGA NoLead
+0
+8
+8
+OptoDevice
+Everlight_IRM-H6xxT
+Everlight IRM-H6xxT infrared remote control receiver module, https://en.everlight.com/wp-content/plugins/ItemRelationship/product_files/pdf/DMO-0000004-IRM-H6XX-TR2_Series_Datasheet_V4.pdf
+everlight ir remote receiver
+0
+4
+4
+OptoDevice
+Everlight_ITR1201SR10AR
+package for Everlight ITR1201SR10AR, light-direction upwards, see https://www.everlight.com/file/ProductFile/ITR1201SR10AR-TR.pdf
+reflective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Everlight_ITR8307
+package for Everlight ITR8307 with PCB cutout, light-direction upwards, see http://www.everlight.com/file/ProductFile/ITR8307.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Everlight_ITR8307F43
+package for Everlight ITR8307/F43, see https://everlighteurope.com/index.php?controller=attachment&id_attachment=5385
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Everlight_ITR8307_Reverse
+package for Everlight ITR8307 with PCB cutout, light-direction downwards, see http://www.everlight.com/file/ProductFile/ITR8307.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Everlight_ITR9608-F
+Fork-type photointerrupter (https://everlighteurope.com/index.php?controller=attachment&id_attachment=5389)
+Photointerrupter infrared LED
+0
+4
+4
+OptoDevice
+Finder_34.81
+Relay SPST, Finder Type 34.81 (opto relays/coupler), vertical/standing form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf
+Relay SPST Finder
+0
+4
+4
+OptoDevice
+Hamamatsu_C12880
+Hamamatsu spectrometer, see http://www.hamamatsu.com/resources/pdf/ssd/c12880ma_kacc1226e.pdf
+opto spectrometer Hamamatsu
+0
+10
+10
+OptoDevice
+Hamamatsu_S13360-30CS
+SiPM, 2pin
+Hamamatsu SiPM
+0
+2
+2
+OptoDevice
+Kingbright_KPS-3227
+3.2mmx2.7mm, light sensor, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-3227SP1C(Ver.16).pdf
+KPS-3227 Ambient Light Photo Sensor
+0
+4
+4
+OptoDevice
+Kingbright_KPS-5130
+http://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-5130PD7C(Ver.14).pdf
+KPS-5130 photodiode RGB sensor
+0
+4
+4
+OptoDevice
+Kingbright_KRC011_Horizontal
+Subminiature Reflective Optical Sensor, http://www.kingbright.com/attachments/file/psearch/000/00/00/KRC011(Ver.15).pdf
+Subminiature Reflective Optical Sensor
+0
+4
+4
+OptoDevice
+Kingbright_KRC011_Vertical
+Subminiature Reflective Optical Sensor, http://www.kingbright.com/attachments/file/psearch/000/00/00/KRC011(Ver.15).pdf
+Subminiature Reflective Optical Sensor
+0
+4
+4
+OptoDevice
+Kodenshi_LG206D
+http://kodenshi.co.jp/products/pdf/sensor/photointerrupter_ic/LG206D.pdf
+Photointerrupter  infrared LED with photo IC
+0
+5
+5
+OptoDevice
+Kodenshi_LG206L
+http://kodenshi.co.jp/products/pdf/sensor/photointerrupter_ic/LG205L.pdf
+Photointerrupter  infrared LED with photo IC
+0
+5
+5
+OptoDevice
+Kodenshi_SG105
+package for Kodenshi SG-105 with PCB cutout, light-direction upwards, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Kodenshi_SG105F
+package for Kodenshi SG-105F, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105F.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Kodenshi_SG105_Reverse
+package for Kodenshi SG-105 with PCB cutout, light-direction downwards, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+LaserDiode_TO3.3-D3.3-3
+Laser Diode, TO-3.3mm, 3pin
+Laser Diode TO3.3
+0
+3
+3
+OptoDevice
+LaserDiode_TO5-D9-3
+Laser Diode, TO5-like (D=9mm), 3pin
+Laser Diode TO5-like
+0
+3
+3
+OptoDevice
+LaserDiode_TO18-D5.6-3
+Laser Diode, TO18-like (D=5.6mm), 3pin
+Laser Diode TO18-like
+0
+3
+3
+OptoDevice
+LaserDiode_TO38ICut-3
+Laser Diode, TO-38-ICut, 3pin
+Laser Diode TO38-ICut
+0
+3
+3
+OptoDevice
+LaserDiode_TO56-3
+Laser Diode, TO-56, 3pin
+Laser Diode TO56
+0
+3
+3
+OptoDevice
+Lightpipe_Bivar_RLP1-400-650
+1-way, 2.8mm lightpipe, 10mm lens output height, 17mm protrusion, https://www.bivar.com/parts_content/Datasheets/RLP1-XXX-XXX.pdf
+planar light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-100-F
+1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 2.54mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-100-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 2.54mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-150-F
+1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 3.81mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-150-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 3.81mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-200-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 5.08mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-250-F
+1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 6.35mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-250-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 6.35mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-300-F
+1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 7.62mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-300-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 7.62mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Bivar_SLP3-150-450-R
+1-way, 3mm lightpipe, round face, 3.8mm lens output height, 11.43mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf
+light pipe 1 way 3mm 
+0
+0
+0
+OptoDevice
+Lightpipe_Dialight_515-1064F
+https://www.dialightsignalsandcomponents.com/515-optopipe-light-pipe-trilevel-2-5mm-rnd-flat-diff-lens-press-fit/#tab-resources
+lightpipe triple tower right angle 3mm
+0
+0
+0
+OptoDevice
+Lightpipe_LPF-C012303S
+https://www.lumex.com/spec/LPF-C012303S.pdf
+lightpipe dual tower right angle 3mm
+0
+0
+0
+OptoDevice
+Lightpipe_LPF-C013301S
+https://www.lumex.com/spec/LPF-C013301S.pdf
+lightpipe triple tower right angle 3mm
+0
+0
+0
+OptoDevice
+Lightpipe_Mentor_1275.x00x
+https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf
+spherical light pipe 4 way 3mm PLCC-2 PLCC-4
+0
+0
+0
+OptoDevice
+Lightpipe_Mentor_1276.1004
+https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf
+spherical light pipe 4 way 3mm PLCC-2 PLCC-4
+0
+0
+0
+OptoDevice
+Lightpipe_Mentor_1276.2004
+https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf
+planar light pipe 4 way 3mm PLCC-2 PLCC-4
+0
+0
+0
+OptoDevice
+Lite-On_LTR-303ALS-01
+ambient light sensor, i2c interface, 6-pin chipled package, http://optoelectronics.liteon.com/upload/download/DS86-2013-0004/LTR-303ALS-01_DS_V1.pdf
+ambient light sensor chipled
+0
+6
+6
+OptoDevice
+Luna_NSL-32
+Optoisolator with LED and photoresistor
+optoisolator
+0
+4
+4
+OptoDevice
+Maxim_OLGA-14_3.3x5.6mm_P0.8mm
+https://pdfserv.maximintegrated.com/land_patterns/90-0602.PDF
+OLGA-14 OESIP-14
+0
+14
+14
+OptoDevice
+ONSemi_QSE15x
+3 Lead Plastic Package
+ONSemi QSE158 QSE159
+0
+3
+3
+OptoDevice
+OnSemi_CASE100AQ
+OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF
+reflective opto couple photo coupler
+0
+4
+4
+OptoDevice
+OnSemi_CASE100CY
+OnSemi CASE 100CY, light-direction upwards, see http://www.onsemi.com/pub/Collateral/QRE1113-D.PDF
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Osram_BP104-SMD
+PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.2x2.2mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5989350/BP%20104%20FAS_EN.pdf
+PhotoDiode plastic SMD DIL
+0
+6
+2
+OptoDevice
+Osram_BPW34S-SMD
+PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5488319/BPW%2034%20S_EN.pdf
+PhotoDiode plastic SMD DIL
+0
+6
+2
+OptoDevice
+Osram_BPW82
+PhotoDiode, BPW82, RM2.54
+PhotoDiode BPW82 RM2.54
+0
+2
+2
+OptoDevice
+Osram_DIL2_4.3x4.65mm_P5.08mm
+PhotoDiode, plastic DIL, 4.3x4.65mm², RM5.08
+PhotoDiode plastic DIL RM5.08
+0
+2
+2
+OptoDevice
+Osram_LPT80A
+PhotoTransistor, sidelooker package, RM2.54
+PhotoTransistor sidelooker package RM2.54
+0
+2
+2
+OptoDevice
+Osram_SFH9x0x
+package for Osram SFH9x0x series of reflective photo interrupters/couplers, see http://www.osram-os.com/Graphics/XPic6/00200860_0.pdf
+reflective photo interrupter SMD
+0
+6
+6
+OptoDevice
+Osram_SFH205
+PhotoDiode, SFH205, RM2.54
+PhotoDiode SFH205 RM2.54
+0
+2
+2
+OptoDevice
+Osram_SFH225
+PhotoDiode, SFH225, RM2.54
+PhotoDiode SFH225 RM2.54
+0
+2
+2
+OptoDevice
+Osram_SFH2201
+PhotoDiode, Clear Silicone, Osram TOPLED, 4x5.09mm, area: 2.85x2.85mm, Orientation mark at cathode, https://dammedia.osram.info/media/resource/hires/osram-dam-25688470/SFH%202201%20A01_EN.pdf
+PhotoDiode silicone
+0
+6
+2
+OptoDevice
+Osram_SFH2430
+PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467144/SFH%202430_EN.pdf
+PhotoDiode plastic SMD DIL
+0
+6
+2
+OptoDevice
+Osram_SFH2440
+PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467146/SFH%202440_EN.pdf
+PhotoDiode plastic SMD DIL
+0
+6
+2
+OptoDevice
+Osram_SFH3710
+Osram SHF3710 NPN phototransistor, SMD Chip LED package, 2.0 x 1.25mm, height 0.85mm, https://look.ams-osram.com/m/14a91a7e00106d22/original/SFH-3710.pdf
+phototransistor npn
+0
+2
+2
+OptoDevice
+Osram_SMD-SmartDIL
+PhotoDiode, plastic SMD SmatDIL
+PhotoDiode plastic SMD SmatDIL
+0
+3
+3
+OptoDevice
+Panasonic_APV-AQY_SSOP-4_4.45x2.65mm_P1.27mm
+https://www.panasonic-electric-works.com/cps/rde/xbcr/pew_eu_en/technical_information_photomos_en.pdf
+SSOP4 APV21 AQY22
+0
+4
+4
+OptoDevice
+PerkinElmer_VTL5C
+Axial Vactrol (http://www.qsl.net/wa1ion/vactrol/vactrol.pdf)
+vactrol
+0
+4
+4
+OptoDevice
+PerkinElmer_VTL5Cx2
+Axial Vactrol (http://www.qsl.net/wa1ion/vactrol/vactrol.pdf)
+vactrol
+0
+5
+5
+OptoDevice
+R_LDR_4.9x4.2mm_P2.54mm_Vertical
+Resistor, LDR 4.9x4.2mm
+Resistor LDR4.9x4.2
+0
+2
+2
+OptoDevice
+R_LDR_5.0x4.1mm_P3mm_Vertical
+Resistor, LDR 5x4.1mm, see http://cdn-reichelt.de/documents/datenblatt/A500/A90xxxx%23PE.pdf
+Resistor LDR5x4.1mm
+0
+2
+2
+OptoDevice
+R_LDR_5.1x4.3mm_P3.4mm_Vertical
+Resistor, LDR 5.1x3.4mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf
+Resistor LDR5.1x3.4mm
+0
+2
+2
+OptoDevice
+R_LDR_5.2x5.2mm_P3.5mm_Horizontal
+Resistor, LDR 5.2x5.2, upright, see http://cdn-reichelt.de/documents/datenblatt/A500/M996011A.pdf
+Resistor LDR5.2x5.2 
+0
+2
+2
+OptoDevice
+R_LDR_7x6mm_P5.1mm_Vertical
+Resistor, LDR 7x6mm
+Resistor LDR7x6mm
+0
+2
+2
+OptoDevice
+R_LDR_10x8.5mm_P7.6mm_Vertical
+Resistor, LDR 10x8.5mm
+Resistor LDR10.8.5mm
+0
+2
+2
+OptoDevice
+R_LDR_11x9.4mm_P8.2mm_Vertical
+Resistor, LDR 11x9.4mm
+Resistor LDR11x9.4mm
+0
+2
+2
+OptoDevice
+R_LDR_12x10.8mm_P9.0mm_Vertical
+Resistor, LDR 12x10.8mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf
+Resistor LDR12x10.8mm
+0
+2
+2
+OptoDevice
+R_LDR_D6.4mm_P3.4mm_Vertical
+Resistor, LDR D=6.4mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf
+Resistor LDRD=6.4mm
+0
+2
+2
+OptoDevice
+R_LDR_D13.8mm_P9.0mm_Vertical
+Resistor, diameter 13.8mm pitch 9mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf
+Resistor LDR 
+0
+2
+2
+OptoDevice
+R_LDR_D20mm_P17.5mm_Vertical
+Resistor, LDR 20mm diameter, pin pitch 17.5mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf
+Resistor LDR
+0
+2
+2
+OptoDevice
+Renesas_DFN-6_1.5x1.6mm_P0.5mm
+DFN, 6 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-hodfn-6pin-l615x16?language=en&r=568376)
+DFN NoLead
+0
+6
+6
+OptoDevice
+Rohm_RPR-0720
+Rohm DFN, 6 Pin (https://fscdn.rohm.com/en/products/databook/datasheet/opto/optical_sensor/photosensor/rpr-0720-e.pdf)
+proximity sensor rohm
+0
+6
+6
+OptoDevice
+ST_VL53L0X
+https://www.st.com/resource/en/datasheet/vl53l1x.pdf
+laser-ranging sensor
+0
+12
+12
+OptoDevice
+Sharp_GP2S700HCP
+Sharp GP2S700HCP, light-direction upwards, see: https://www.sharpsde.com/fileadmin/products/Optoelectronics/Isolation%20Devices/Specs_Photointerrupter/GP2S700HCP_03Oct05_DS_D3-A02201FEN.pdf
+refective opto couple photo coupler
+0
+4
+4
+OptoDevice
+Sharp_GP2Y0A41SK0F
+http://www.sharp-world.com/products/device/lineup/data/pdf/datasheet/gp2y0a41sk_e.pdf
+Distance Sensor Sharp
+0
+2
+2
+OptoDevice
+Sharp_IS471F
+Sharp OPIC IS471F, see http://pdf.datasheetcatalog.com/datasheet/Sharp/mXvrzty.pdf
+Sharp OPIC IS471F
+0
+4
+4
+OptoDevice
+Sharp_IS485
+Sharp OPIC, IS485, IS486, see http://microrato.ua.pt/main/Actividades/Estagios/Docs/IS485_6.pdf
+Sharp OPIC IS485 IS486
+0
+3
+3
+OptoDevice
+Siemens_SFH900
+package for Siemens SFH900 reflex photo interrupter/coupler/object detector, see https://www.batronix.com/pdf/sfh900.pdf
+Siemens SFH900 reflex photo interrupter coupler object detector
+0
+3
+3
+OptoDevice
+Toshiba_TORX170_TORX173_TORX193_TORX194
+Fiberoptic Reciver, RX, Toshiba, Toslink, TORX170, TORX173, TORX193, TORX194
+Fiberoptic Reciver RX Toshiba Toslink TORX170 TORX173 TORX193 TORX194
+0
+6
+6
+OptoDevice
+Toshiba_TOTX170_TOTX173_TOTX193_TOTX194
+Fiberoptic Reciver, RX, Toshiba, Toslink, TORX170, TORX173, TORX193, TORX194
+Fiberoptic Reciver RX Toshiba Toslink TORX170 TORX173 TORX193 TORX194
+0
+6
+6
+OptoDevice
+Vishay_CAST-3Pin
+IR Receiver Vishay TSOP-xxxx, CAST package, see https://www.vishay.com/docs/82493/tsop311.pdf
+IRReceiverVishayTSOP-xxxx CAST
+0
+3
+3
+OptoDevice
+Vishay_CNY70
+package for Vishay CNY70 refective photo coupler/interrupter, https://www.vishay.com/docs/83751/cny70.pdf
+Vishay CNY70 refective photo coupler
+0
+4
+4
+OptoDevice
+Vishay_MINICAST-3Pin
+IR Receiver Vishay TSOP-xxxx, MINICAST package, see https://www.vishay.com/docs/82669/tsop32s40f.pdf
+IR Receiver Vishay TSOP-xxxx MINICAST
+0
+3
+3
+OptoDevice
+Vishay_MINIMOLD-3Pin
+IR Receiver Vishay TSOP-xxxx, MINIMOLD package, see https://www.vishay.com/docs/82742/tsop331.pdf
+IR Receiver Vishay TSOP-xxxx MINIMOLD
+0
+3
+3
+OptoDevice
+Vishay_MOLD-3Pin
+IR Receiver Vishay TSOP-xxxx, MOLD package, see https://www.vishay.com/docs/82669/tsop32s40f.pdf
+IR Receiver Vishay TSOP-xxxx MOLD
+0
+3
+3
+OptoDevice
+Vishay_TCRT5000
+IR Reflective Optical Sensor with Transistor Output TCRT5000 https://www.vishay.com/docs/83760/tcrt5000.pdf
+IR Reflective Optical Sensor with Transistor Output TCRT5000 Vishay Distance Sensor
+0
+4
+4
+Oscillator
+Oscillator_DIP-8
+Oscillator, DIP8,http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf
+oscillator
+0
+4
+4
+Oscillator
+Oscillator_DIP-8_LargePads
+Oscillator, DIP8, Large Pads, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf
+oscillator
+0
+4
+4
+Oscillator
+Oscillator_DIP-14
+Oscillator, DIP14, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf
+oscillator
+0
+4
+4
+Oscillator
+Oscillator_DIP-14_LargePads
+Oscillator, DIP14, Large Pads, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf
+oscillator
+0
+4
+4
+Oscillator
+Oscillator_OCXO_Morion_MV267
+http://www.morion.com.ru/catalog_pdf/MV267.pdf
+OCXO
+0
+5
+5
+Oscillator
+Oscillator_OCXO_Morion_MV317
+https://www.morion-us.com/catalog_pdf/mv317.pdf
+OCXO
+0
+5
+5
+Oscillator
+Oscillator_SMD_Abracon_ABLNO
+https://abracon.com/Precisiontiming/ABLNO.pdf
+VCXO XO
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm
+Miniature Crystal Clock Oscillator Abracon ASCO series, https://abracon.com/Oscillators/ASCO.pdf, 1.6x1.2mm^2 package
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm
+Miniature Crystal Clock Oscillator Abracon ASDMB series, 2.5x2.0mm package, http://www.abracon.com/Oscillators/ASDMB.pdf
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm
+Abracon ASE, Miniature Crystal Clock Oscillator, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Oscillators/ASEseries.pdf
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering
+Abracon ASE, Miniature Crystal Clock Oscillator, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Oscillators/ASEseries.pdf
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm
+Abracon ASV, Miniature Crystal Clock Oscillator, 7.0x5.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Oscillators/ASV.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm_HandSoldering
+Abracon ASV, Miniature Crystal Clock Oscillator, 7.0x5.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.abracon.com/Oscillators/ASV.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Diodes_FN-4Pin_7.0x5.0mm
+FN Series Crystal Clock Oscillator (XO) (https://www.diodes.com/assets/Datasheets/FN_3-3V.pdf)
+Oscillator Crystal SMD SMT
+0
+4
+4
+Oscillator
+Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm
+Miniature Crystal Clock Oscillator ECS 2520MV series, https://www.ecsxtal.com/store/pdf/ECS-2520MV.pdf
+Miniature Crystal Clock Oscillator ECS 2520MV series SMD SMT HCMOS
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm
+Miniature Crystal Clock Oscillator EuroQuartz XO32 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO32.pdf, 3.2x2.5mm^2 package
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm_RotB
+EuroQuartz XO32, Miniature Crystal Clock Oscillator, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO32.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm_RotB_HandSoldering
+EuroQuartz XO32, Miniature Crystal Clock Oscillator, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO32.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm
+EuroQuartz XO53, Miniature Crystal Clock Oscillator, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO53.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm_HandSoldering
+EuroQuartz XO53, Miniature Crystal Clock Oscillator, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO53.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm
+EuroQuartz XO91, Miniature Crystal Clock Oscillator, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO91.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm_HandSoldering
+EuroQuartz XO91, Miniature Crystal Clock Oscillator, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://cdn-reichelt.de/documents/datenblatt/B400/XO91.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS1-6Pin_14.8x9.1mm
+Fordahl DFA S1-KHZ/LHZ, Miniature Crystal Clock Oscillator TXCO, 14.8x9.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+6
+6
+Oscillator
+Oscillator_SMD_Fordahl_DFAS2-4Pin_7.3x5.1mm
+Fordahl DFA S2-KS/LS/US, Miniature Crystal Clock Oscillator TXCO, 7.3x5.1mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS2-4Pin_7.3x5.1mm_HandSoldering
+Fordahl DFA S2-KS/LS/US, Miniature Crystal Clock Oscillator TXCO, 7.3x5.1mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS3-4Pin_9.1x7.2mm
+Fordahl DFA S3-KS/LS/US, Miniature Crystal Clock Oscillator TXCO, 9.1x7.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS3-4Pin_9.1x7.2mm_HandSoldering
+Fordahl DFA S3-KS/LS/US, Miniature Crystal Clock Oscillator TXCO, 9.1x7.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS7-4Pin_19.9x12.9mm
+Fordahl DFA S7-K/L, Miniature Crystal Clock Oscillator TXCO, 19.9x12.9mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS7-4Pin_19.9x12.9mm_HandSoldering
+Fordahl DFA S7-K/L, Miniature Crystal Clock Oscillator TXCO, 19.9x12.9mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS11-4Pin_7.0x5.0mm
+Fordahl DFA S11-OV/UOV, Miniature Crystal Clock Oscillator TXCO, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS11-4Pin_7.0x5.0mm_HandSoldering
+Fordahl DFA S11-OV/UOV, Miniature Crystal Clock Oscillator TXCO, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm
+Fordahl DFA S15-OV/UOV, Ultraminiature Crystal Clock Oscillator TXCO, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm_HandSoldering
+Fordahl DFA S15-OV/UOV, Ultraminiature Crystal Clock Oscillator TXCO, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Fox_FT5H_5.0x3.2mm
+https://foxonline.com/wp-content/uploads/pdfs/T5HN_T5HV.pdf
+Fox TXCO temperature compensated oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_IDT_JS6-6_5.0x3.2mm_P1.27mm
+SMD Crystal Oscillator IDT https://www.idt.com/document/dst/xu-family-datasheet#page=15, 5.0x3.2mm
+SMD SMT crystal oscillator
+0
+6
+6
+Oscillator
+Oscillator_SMD_IDT_JU6-6_7.0x5.0mm_P2.54mm
+SMD Crystal Oscillator IDT https://www.idt.com/document/dst/xu-family-datasheet#page=17, 7.0x5.0mm
+SMD SMT crystal oscillator
+0
+6
+6
+Oscillator
+Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm
+IQD IQXO-70, Crystal Clock Oscillator, 7.5x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm_HandSoldering
+IQD IQXO-70, Crystal Clock Oscillator, 7.5x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_Kyocera_2520-6Pin_2.5x2.0mm
+https://global.kyocera.com/prdct/electro/product/pdf/kt2520_e.pdf
+2.5mm 2mm SMD
+0
+6
+6
+Oscillator
+Oscillator_SMD_Kyocera_KC2520Z-4Pin_2.5x2.0mm
+https://global.kyocera.com/prdct/electro/product/pdf/clock_z_xz_e.pdf
+2.5mm 2mm SMD
+0
+4
+4
+Oscillator
+Oscillator_SMD_OCXO_ConnorWinfield_OH300
+http://www.conwin.com/datasheets/cx/cx282.pdf
+OCXO
+0
+7
+7
+Oscillator
+Oscillator_SMD_SI570_SI571_HandSoldering
+SI570, SI571, Programmable oscillator, Standard
+SI570 SI571 Programmable oscillator Standard
+0
+8
+8
+Oscillator
+Oscillator_SMD_SI570_SI571_Standard
+SI570, SI571, Programmable oscillator, Standard
+SI570 SI571 Programmable oscillator Standard
+0
+8
+8
+Oscillator
+Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm
+Seiko Epson SG-210, Crystal Oscillator, 2.5x2.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-210SED
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm_HandSoldering
+Seiko Epson SG-210, Crystal Oscillator, 2.5x2.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-210SED
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG3030CM
+SMD Crystal Oscillator Seiko Epson SG-3030CM package
+SMD SMT crystal oscillator
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm
+Seiko Epson SG-8002CA, Crystal Oscillator, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm_HandSoldering
+Seiko Epson SG-8002CA, Crystal Oscillator, 7.0x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm
+Seiko Epson SG-8002CE, Crystal Oscillator, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm_HandSoldering
+Seiko Epson SG-8002CE, Crystal Oscillator, 3.2x2.5mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002JA-4Pin_14.0x8.7mm
+Seiko Epson SG-8002JA, Crystal Oscillator, 14.0x8.7mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002JA-4Pin_14.0x8.7mm_HandSoldering
+Seiko Epson SG-8002JA, Crystal Oscillator, 14.0x8.7mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002JC-4Pin_10.5x5.0mm
+Seiko Epson SG-8002JC, Crystal Oscillator, 10.5x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002JC-4Pin_10.5x5.0mm_HandSoldering
+Seiko Epson SG-8002JC, Crystal Oscillator, 10.5x5.0mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm
+Seiko Epson SG-8002LB, Crystal Oscillator, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm_HandSoldering
+Seiko Epson SG-8002LB, Crystal Oscillator, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SeikoEpson_TG2520SMN-xxx-xxxxxx-4Pin_2.5x2.0mm
+Miniature Crystal Clock Oscillator TG2520 series, https://support.epson.biz/td/api/doc_check.php?dl=app_TG2520SMN&lang=en
+Miniature Crystal Clock Oscillator TG2520 series SMD SMT
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiT_PQFN-4Pin_2.0x1.6mm
+SiTime SiT8008B, MEMS programmable oscillator, 2.0x1.6mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.sitime.com/datasheet/SiT8008 page 10
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiT_PQFN-4Pin_2.5x2.0mm
+SiTime SiT8008B, MEMS programmable oscillator, 2.5x2.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.sitime.com/datasheet/SiT8008 page 10
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiT_PQFN-4Pin_3.2x2.5mm
+SiTime SiT8008B, MEMS programmable oscillator, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.sitime.com/datasheet/SiT8008 page 11
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiT_PQFN-4Pin_5.0x3.2mm
+SiTime SiT8008B, MEMS programmable oscillator, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.sitime.com/datasheet/SiT8008 page 11
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiT_PQFN-4Pin_7.0x5.0mm
+SiTime SiT8008B, MEMS programmable oscillator, 7.0x5.0mm package, SMD, generated with kicad-footprint-generator make_crystal.py, https://www.sitime.com/datasheet/SiT8008 page 12
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_SiTime_PQFD-6L_3.2x2.5mm
+3.2x2.5mm, 6-pin QFN (https://www.sitime.com/datasheet/SiT9365 page 13)
+SMD SMT mems oscillator
+0
+6
+6
+Oscillator
+Oscillator_SMD_SiTime_SiT9121-6Pin_3.2x2.5mm
+3.2x2.5mm, 1-220MHz High Performance Differential Oscillator SiTime SiT9121 https://www.sitime.com/datasheet/SiT9121
+SMD SMT crystal oscillator
+0
+6
+6
+Oscillator
+Oscillator_SMD_Silicon_Labs_LGA-6_2.5x3.2mm_P1.25mm
+Silicon_Labs  LGA, 6 Pin (https://www.silabs.com/documents/public/data-sheets/si512-13.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Silicon_Labs LGA NoLead
+0
+6
+6
+Oscillator
+Oscillator_SMD_TCXO_G158
+TCXO
+TCXO
+0
+4
+4
+Oscillator
+Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm
+TXC 7C, Miniature Crystal Clock Oscillator, 5.0x3.2mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccorp.com/download/products/osc/7C_o.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm_HandSoldering
+TXC 7C, Miniature Crystal Clock Oscillator, 5.0x3.2mm package, SMD, hand-soldering, generated with kicad-footprint-generator make_crystal.py, http://www.txccorp.com/download/products/osc/7C_o.pdf
+
+0
+4
+4
+Oscillator
+Oscillator_SeikoEpson_SG-8002DB
+14-lead dip package, row spacing 7.62 mm (300 mils)
+DIL DIP PDIP 2.54mm 7.62mm 300mil
+0
+4
+4
+Oscillator
+Oscillator_SeikoEpson_SG-8002DC
+8-lead dip package, row spacing 7.62 mm (300 mils)
+DIL DIP PDIP 2.54mm 7.62mm 300mil
+0
+4
+4
+Package_BGA
+Alliance_TFBGA-36_6x8mm_Layout6x8_P0.75mm
+Alliance TFBGA-36, NSMD, 6.0x8.0mm, 36 Ball, 6x8 Layout, 0.75mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.alliancememory.com/wp-content/uploads/pdf/AS6C1008_Mar_2023V1.2.pdf#page=13
+BGA 36 0.75 36-ball FBGA
+0
+36
+36
+Package_BGA
+Alliance_TFBGA-54_8x8mm_Layout9x9_P0.8mm
+Alliance TFBGA 54 pins, 8x8mm, 54 Ball, 9x9 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.alliancememory.com/wp-content/uploads/pdf/dram/Alliance_Memory_64M-AS4C4M16SA-CI_v5.0_October_2018.pdf#page=54
+BGA 54 0.8
+0
+54
+54
+Package_BGA
+Analog_BGA-28_4x6.25mm_Layout4x7_P0.8mm
+Analog BGA-28, 0.4mm pad, 4.0x6.25mm, 28 Ball, 4x7 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/technical-documentation/data-sheets/8063fa.pdf
+BGA 28 0.8
+0
+28
+28
+Package_BGA
+Analog_BGA-49_6.25x6.25mm_Layout7x7_P0.8mm
+Analog BGA-49, 6.25x6.25mm, 49 Ball, 7x7 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081600_0_bga49.pdf https://www.analog.com/media/en/technical-documentation/product-information/assembly-considerations-for-umodule-bga-lga-package.pdf
+BGA 49 0.8
+0
+49
+49
+Package_BGA
+Analog_BGA-77_9x15mm_Layout7x11_P1.27mm
+Analog Devices BGA-77, 0.63mm pad, 9x15mm, 77 Ball, 7x11 Layout, 1.27mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081964_B_bga77.pdf
+BGA 77 1.27 LTC Dwg 05-08-1964 Rev. B
+0
+77
+77
+Package_BGA
+Analog_BGA-165_11.9x16mm_Layout11x15_P1.0mm
+Analog BGA-165 (Reference LTC DWG#05-08-1605 Rev B), 11.9x16.0mm, 165 Ball, 11x15 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081605_b_bga165.pdf
+BGA 165 1.0
+0
+165
+165
+Package_BGA
+Analog_BGA-209_9.5x16mm_Layout11x19_P0.8mm
+Analog BGA-209 (Reference LTC DWG#05-08-1561 Rev B), 9.5x16.0mm, 209 Ball, 11x19 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081561_bga209.pdf
+BGA 209 0.8
+0
+209
+209
+Package_BGA
+BGA-9_1.6x1.6mm_Layout3x3_P0.5mm
+BGA-9, http://www.ti.com/lit/ds/symlink/bq27421-g1.pdf
+BGA-9
+0
+9
+9
+Package_BGA
+BGA-16_1.92x1.92mm_Layout4x4_P0.5mm
+BGA-16, http://www.st.com/content/ccc/resource/technical/document/datasheet/group2/bc/cd/62/9e/8f/30/47/69/CD00151267/files/CD00151267.pdf/jcr:content/translations/en.CD00151267.pdf
+BGA-16
+0
+16
+16
+Package_BGA
+BGA-24_6x8mm_Layout5x5_P1.0mm
+BGA-24, 6x8mm, 24 Ball, 5x5 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.issi.com/WW/pdf/66-67WVO32M8DALL-BLL.pdf#page=32
+BGA 24 1.0
+0
+24
+24
+Package_BGA
+BGA-25_6.35x6.35mm_Layout5x5_P1.27mm
+BGA-25, https://www.analog.com/media/en/technical-documentation/data-sheets/ltm4624.pdf
+BGA-25 uModule
+0
+25
+25
+Package_BGA
+BGA-36_3.396x3.466mm_Layout6x6_P0.4mm_Ball0.25mm_Pad0.2mm_NSMD
+Altera V36, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00486-00.pdf
+Altera BGA-36 V36 VBGA
+0
+36
+36
+Package_BGA
+BGA-48_8.0x9.0mm_Layout6x8_P0.8mm
+BGA-48 - pitch 0.8 mm
+BGA-48
+0
+48
+48
+Package_BGA
+BGA-64_9.0x9.0mm_Layout10x10_P0.8mm
+BGA-64, 10x10 raster, 9x9mm package, pitch 0.8mm
+BGA-64
+0
+64
+64
+Package_BGA
+BGA-68_5.0x5.0mm_Layout9x9_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD
+Altera MBGA-68, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00344-01.pdf
+Altera BGA-68 M68 MBGA
+0
+68
+68
+Package_BGA
+BGA-81_4.496x4.377mm_Layout9x9_P0.4mm_Ball0.25mm_Pad0.2mm_NSMD
+Altera V81, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00478-01.pdf
+Altera VBGA V81 BGA-81
+0
+81
+81
+Package_BGA
+BGA-90_8.0x13.0mm_Layout2x3x15_P0.8mm
+BGA-90, http://www.issi.com/WW/pdf/42-45S32800J.pdf
+BGA-90
+0
+90
+90
+Package_BGA
+BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm
+BGA-96, http://www.mouser.com/ds/2/198/43-46TR16640B-81280BL-706483.pdf
+BGA-96
+0
+96
+96
+Package_BGA
+BGA-100_6.0x6.0mm_Layout11x11_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD
+Altera MBGA-100, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00345-01.pdf
+Altera BGA-100 M100 MBGA
+0
+100
+100
+Package_BGA
+BGA-100_11.0x11.0mm_Layout10x10_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD
+BGA-100, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00223-02.pdf
+BGA-100
+0
+100
+100
+Package_BGA
+BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD
+121-ball, 0.8mm BGA (based on http://www.latticesemi.com/view_document?document_id=213)
+BGA 0.8mm 9mm 121
+0
+121
+121
+Package_BGA
+BGA-132_12x18mm_Layout11x17_P1.0mm
+BGA-132 11x17 12x18mm 1.0pitch
+BGA-132
+0
+132
+132
+Package_BGA
+BGA-144_7.0x7.0mm_Layout13x13_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD
+Altera MBGA-144, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00346-00.pdf
+Altera BGA-144 M144 MBGA
+0
+144
+144
+Package_BGA
+BGA-144_13.0x13.0mm_Layout12x12_P1.0mm
+BGA-144, http://www.topline.tv/drawings/pdf/BGA%201,0mm%20pitch/LBGA144T1.0-DC128.pdf
+BGA-144
+0
+144
+144
+Package_BGA
+BGA-152_14x18mm_Layout13x17_P0.5mm
+BGA-152_14x18mm_Layout13x17_P0.5mm
+VBGA-152
+0
+152
+152
+Package_BGA
+BGA-153_8.0x8.0mm_Layout15x15_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD
+Altera MBGA-153, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00471-00.pdf
+Altera BGA-153 M153 MBGA
+0
+153
+153
+Package_BGA
+BGA-169_11.0x11.0mm_Layout13x13_P0.8mm_Ball0.5mm_Pad0.4mm_NSMD
+Altera U169, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00470-01.pdf
+Altera UBGA U169 BGA-169
+0
+169
+169
+Package_BGA
+BGA-196_15x15mm_Layout14x14_P1.0mm
+BGA-196, 15.0x15.0mm, 196 Ball, 14x14 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://ww1.microchip.com/downloads/en/DeviceDoc/VMDS-10502.pdf#page=99
+BGA 196 1.0
+0
+196
+196
+Package_BGA
+BGA-200_10x14.5mm_Layout12x22_P0.8x0.65mm
+BGA-200, 10.0x14.5mm, 200 Ball, 12x22 Layout, 0.8x0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.issi.com/WW/pdf/43-46LQ32256A-AL.pdf
+BGA 200 0.8x0.65
+0
+200
+200
+Package_BGA
+BGA-256_11.0x11.0mm_Layout20x20_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD
+Altera MBGA-256, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00348-01.pdf
+Altera BGA-256 M256 MBGA
+0
+256
+256
+Package_BGA
+BGA-256_14.0x14.0mm_Layout16x16_P0.8mm_Ball0.45mm_Pad0.32mm_NSMD
+BGA-256, dimensions: https://www.xilinx.com/support/documentation/package_specs/ft256.pdf, design rules: https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf
+BGA-256
+0
+256
+256
+Package_BGA
+BGA-256_17.0x17.0mm_Layout16x16_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD
+BGA-256, dimensions: https://www.xilinx.com/support/documentation/package_specs/ft256.pdf, design rules: https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf
+BGA-256
+0
+256
+256
+Package_BGA
+BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.5mm_Pad0.4mm_NSMD
+Altera U324, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00474-02.pdf
+Altera UBGA U324 BGA-324
+0
+324
+324
+Package_BGA
+BGA-324_15x15mm_Layout18x18_P0.8mm
+BGA-324, 15x15mm, 324 Ball, 18x18 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://colognechip.com/docs/ds1001-gatemate1-datasheet-2022-05.pdf#page=92
+BGA 324 0.8 GateMate FPGA
+0
+324
+324
+Package_BGA
+BGA-324_19.0x19.0mm_Layout18x18_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD
+BGA-324, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00233-03.pdf
+BGA-324
+0
+324
+324
+Package_BGA
+BGA-352_35.0x35.0mm_Layout26x26_P1.27mm
+BGA-352, https://www.fujitsu.com/downloads/MICRO/fma/pdfmcu/b352p05.pdf
+BGA-352
+0
+352
+352
+Package_BGA
+BGA-400_21.0x21.0mm_Layout20x20_P1.0mm
+BGA-400, https://www.xilinx.com/support/documentation/package_specs/fg400.pdf
+BGA-400
+0
+400
+400
+Package_BGA
+BGA-484_23.0x23.0mm_Layout22x22_P1.0mm
+BGA-484, https://www.xilinx.com/support/documentation/package_specs/fg484.pdf
+BGA-484
+0
+484
+484
+Package_BGA
+BGA-529_19x19mm_Layout23x23_P0.8mm
+BGA-529, NSMD, 19.0x19.0mm, 529 Ball, 23x23 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 529 0.8 529-ball FBGA
+0
+529
+529
+Package_BGA
+BGA-624_21x21mm_Layout25x25_P0.8mm
+BGA-624, 21.0x21.0mm, 624 Ball, 25x25 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT1529-1.pdf
+BGA 624 0.8
+0
+624
+624
+Package_BGA
+BGA-625_21.0x21.0mm_Layout25x25_P0.8mm
+BGA-625
+BGA-625
+0
+625
+625
+Package_BGA
+BGA-672_27.0x27.0mm_Layout26x26_P1.0mm_Ball0.6mm_Pad0.5mm_NSMD
+Altera BGA-672, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00472-00.pdf
+Altera BGA-672 F672 FBGA
+0
+672
+672
+Package_BGA
+BGA-676_27.0x27.0mm_Layout26x26_P1.0mm_Ball0.6mm_Pad0.5mm_NSMD
+XILINX BGA-676, https://www.xilinx.com/support/documentation/package_specs/fg676.pdf
+XILINX BGA-676 FG676/FGG676
+0
+676
+676
+Package_BGA
+BGA-1023_33.0x33.0mm_Layout32x32_P1.0mm
+BGA-1023
+BGA-1023
+0
+1023
+1023
+Package_BGA
+BGA-1156_35.0x35.0mm_Layout34x34_P1.0mm
+BGA-1156
+BGA-1156
+0
+1156
+1156
+Package_BGA
+BGA-1295_37.5x37.5mm_Layout36x36_P1.0mm
+BGA-1295
+BGA-1295
+0
+1295
+1295
+Package_BGA
+EPC_BGA-4_0.9x0.9mm_Layout2x2_P0.45mm
+EPC BGA-4, 0.9x09mm, Pitch 0.4mm, https://epc-co.com/epc/Portals/0/epc/documents/datasheets/EPC2035_datasheet.pdf
+EPC BGA-4
+0
+8
+4
+Package_BGA
+FB-BGA-484_23.0x23.0mm_Layout22x22_P1.0mm
+Xilinx FB-484, https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf
+FB-BGA-484
+0
+484
+484
+Package_BGA
+FBGA-78_7.5x10.5mm_Layout9x13_P0.8mm
+FBGA-78, 7.5x10.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/785#page=88
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+FBGA-78_7.5x10.6mm_Layout9x13_P0.8mm
+FBGA-78, 7.5x10.6mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1912#page=87
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+FBGA-78_7.5x11mm_Layout2x3x13_P0.8mm
+FBGA-78, https://www.skhynix.com/product/filedata/fileDownload.do?seq=7687
+FBGA-78
+0
+78
+78
+Package_BGA
+FBGA-78_8x10.5mm_Layout9x13_P0.8mm
+FBGA-78, 8.0x10.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1978#page=86
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+FBGA-78_9x10.5mm_Layout9x13_P0.8mm
+FBGA-78, 9.0x10.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.issi.com/WW/pdf/43-46TR16256A-85120AL.pdf#page=86
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+FBGA-78_9x10.6mm_Layout9x13_P0.8mm
+FBGA-78, 9.0x10.6mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1900#page=87
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+FBGA-96_7.5x13.5mm_Layout9x16_P0.8mm
+FBGA-96, 7.5x13.5mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1896#page=87
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+FBGA-96_7.5x13mm_Layout9x16_P0.8mm
+FBGA-96, 7.5x13mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/746#page=96
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+FBGA-96_8x13mm_Layout9x16_P0.8mm
+FBGA-96, 8.0x13.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1594#page=98
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+FBGA-96_8x14mm_Layout9x16_P0.8mm
+FBGA-96, 8.0x14.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, generalized from https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=28
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+FBGA-96_9x13mm_Layout9x16_P0.8mm
+FBGA-96, 9.0x13.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://insignis-tech.com/download/1884#page=87
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+FBGA-96_9x14mm_Layout9x16_P0.8mm
+FBGA-96, 9.0x14.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, generalized from https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=26
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+Fujitsu_WLP-15_2.28x3.092mm_Layout3x5_P0.4mm
+WLP-15, 3x5 raster, 2.28x3.092mm package, pitch 0.4mm; http://www.fujitsu.com/global/documents/products/devices/semiconductor/fram/lineup/MB85RS1MT-DS501-00022-7v0-E.pdf
+BGA 8 0.4
+0
+8
+8
+Package_BGA
+Infineon_LFBGA-292_17x17mm_Layout20x20_P0.8mm
+Infineon LFBGA-292, 0.35mm pad, 17.0x17.0mm, 292 Ball, 20x20 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.infineon.com/cms/en/product/packages/PG-LFBGA/PG-LFBGA-292-11/
+BGA 292 0.8
+0
+292
+292
+Package_BGA
+Infineon_TFBGA-48_6x10mm_Layout6x8_P0.75mm
+Cypress / Infineon TFBGA-48, NSMD, 6.0x10.0mm, 48 Ball, 6x8 Layout, 0.75mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.infineon.com/dgdl/Infineon-CY14U256LA_256-Kbit_(32_K_8)_nvSRAM-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ec0a9c33546
+BGA 48 0.75 48-ball FBGA
+0
+48
+48
+Package_BGA
+LFBGA-100_10x10mm_Layout10x10_P0.8mm
+LFBGA-100, 10.0x10.0mm, 100 Ball, 10x10 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f103tb.pdf#page=87
+BGA 100 0.8
+0
+100
+100
+Package_BGA
+LFBGA-144_10x10mm_Layout12x12_P0.8mm
+LFBGA-144, 10.0x10.0mm, 144 Ball, 12x12 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f103ze.pdf#page=114
+BGA 144 0.8
+0
+144
+144
+Package_BGA
+LFBGA-153_11.5x13mm_Layout14x14_P0.5mm
+JEDEC eMMC AN BGA-153, 11.5x13.0mm, 153 Ball, 14x14 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.jedec.org/sites/default/files/docs/MO-276F.pdf
+BGA 153 0.5
+0
+153
+153
+Package_BGA
+LFBGA-169_12x16mm_Layout14x28_P0.5mm
+JEDEC eMMC AA BGA-169, 12.0x16.0mm, 169 Ball, 14x28 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.jedec.org/sites/default/files/docs/MO-276F.pdf
+BGA 169 0.5
+0
+169
+169
+Package_BGA
+LFBGA-169_12x18mm_Layout14x28_P0.5mm
+JEDEC eMMC AB BGA-169, 12.0x18.0mm, 169 Ball, 14x28 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.jedec.org/sites/default/files/docs/MO-276F.pdf
+BGA 169 0.5
+0
+169
+169
+Package_BGA
+LFBGA-169_14x18mm_Layout14x28_P0.5mm
+JEDEC eMMC AC BGA-169, 14.0x18.0mm, 169 Ball, 14x28 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.jedec.org/sites/default/files/docs/MO-276F.pdf
+BGA 169 0.5
+0
+169
+169
+Package_BGA
+LFBGA-289_14x14mm_Layout17x17_P0.8mm
+LFBGA-289, 14.0x14.0mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp131c.pdf
+BGA 289 0.8
+0
+289
+289
+Package_BGA
+LFBGA-400_16x16mm_Layout20x20_P0.8mm
+LFBGA-400, NSMD, 16.0x16.0mm, 400 Ball, 20x20 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 400 0.8 400-ball FBGA
+0
+400
+400
+Package_BGA
+LFBGA-484_18x18mm_Layout22x22_P0.8mm
+LFBGA-484, NSMD, 18.0x18.0mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 484 0.8 484-ball LFBGA
+0
+484
+484
+Package_BGA
+Lattice_caBGA-381_17x17mm_Layout20x20_P0.8mm
+Lattice caBGA-381, ECP5 FPGAs, 17.0x17.0mm, 381 Ball, 20x20 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.latticesemi.com/view_document?document_id=213
+BGA 381 0.8
+0
+381
+381
+Package_BGA
+Lattice_caBGA-381_17x17mm_Layout20x20_P0.8mm_SMD
+Lattice caBGA-381, ECP5 FPGAs, 17.0x17.0mm, 381 Ball, 20x20 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.latticesemi.com/view_document?document_id=213
+BGA 381 0.8
+0
+381
+381
+Package_BGA
+Lattice_caBGA-756_27x27mm_Layout32x32_P0.8mm
+Lattice caBGA-756, ECP5 FPGAs, 27.0x27.0mm, 756 Ball, 32x32 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.latticesemi.com/view_document?document_id=213
+BGA 756 0.8
+0
+756
+756
+Package_BGA
+Lattice_iCE40_csBGA-132_8x8mm_Layout14x14_P0.5mm
+Lattice csBGA-132, Option 2, iCE40 FPGAs, 8.0x8.0mm, 132 Ball, 14x14 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.latticesemi.com/view_document?document_id=213
+BGA 132 0.5
+0
+132
+132
+Package_BGA
+Linear_BGA-133_15.0x15.0mm_Layout12x12_P1.27mm
+Analog Devices (Linear Tech), 133-pin BGA uModule, 15.0x15.0x4.92mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf
+133 pin bga
+0
+134
+134
+Package_BGA
+MAPBGA-272_9x9mm_Layout17x17_P0.5mm
+MAPBGA 9x9x1.11 PKG, 9.0x9.0mm, 272 Ball, 17x17 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/98ASA00869D.pdf#page=1
+BGA 272 0.5
+0
+272
+272
+Package_BGA
+MAPBGA-289_14x14mm_Layout17x17_P0.8mm
+MAPBGA 14x14x1.18 PKG, 14.0x14.0mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/98ASA00855D.pdf#page=1
+BGA 289 0.8
+0
+289
+289
+Package_BGA
+Maxim_WLP-9_1.595x1.415_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mm_NSMD
+Maxim_WLP-9 W91C1+1 https://pdfserv.maximintegrated.com/package_dwgs/21-0459.PDF
+Maxim_WLP-9
+0
+9
+9
+Package_BGA
+Maxim_WLP-12
+Maxim_WLP-12 W121B2+1 http://pdfserv.maximintegrated.com/package_dwgs/21-0009.PDF
+Maxim_WLP-12
+0
+12
+12
+Package_BGA
+Maxim_WLP-12_2.008x1.608mm_Layout4x3_P0.4mm
+Maxim WLP-12, W121H2+1, 2.008x1.608mm, 12 Ball, 4x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://pdfserv.maximintegrated.com/package_dwgs/21-100302.PDF, https://pdfserv.maximintegrated.com/package_dwgs/21-100302.PDF
+BGA 12 0.4
+0
+12
+12
+Package_BGA
+Microchip_FCG1152_BGA-1152_35x35mm_Layout34x34_P1.0mm
+FCG1152, 35.0x35.0mm, 1152 Ball, 34x34 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/UserGuides/microchip_polarfire_soc_fpga_packaging_and_pin_descriptions_user_guide_vb.pdf
+BGA 1152 1.0
+0
+1152
+1152
+Package_BGA
+Microchip_FCSG325_BGA-325_11x11mm_Layout21x21_P0.5mm
+FCSG325, 11.0x11.0mm, 325 Ball, 21x21 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/UserGuides/microchip_polarfire_soc_fpga_packaging_and_pin_descriptions_user_guide_vb.pdf
+BGA 325 0.5
+0
+325
+325
+Package_BGA
+Microchip_FCSG536_BGA-536_16x16mm_Layout30x30_P0.5mm
+FCSG536, 16.0x16.0mm, 536 Ball, 30x30 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/UserGuides/microchip_polarfire_soc_fpga_packaging_and_pin_descriptions_user_guide_vb.pdf
+BGA 536 0.5
+0
+536
+536
+Package_BGA
+Microchip_FCVG484_BGA-484_19x19mm_Layout22x22_P0.8mm
+FCVG484, 19.0x19.0mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/UserGuides/microchip_polarfire_soc_fpga_packaging_and_pin_descriptions_user_guide_vb.pdf
+BGA 484 0.8
+0
+484
+484
+Package_BGA
+Microchip_FCVG784_BGA-784_23x23mm_Layout28x28_P0.8mm
+FCVG784, 23.0x23.0mm, 784 Ball, 28x28 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/UserGuides/microchip_polarfire_soc_fpga_packaging_and_pin_descriptions_user_guide_vb.pdf
+BGA 784 0.8
+0
+784
+784
+Package_BGA
+Microchip_TFBGA-196_11x11mm_Layout14x14_P0.75mm_SMD
+TFBGA-196, 11.0x11.0mm, 196 Ball, 14x14 Layout, 0.75mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Series-Data-Sheet-DS60001476C.pdf#page=2956
+BGA 196 0.75
+0
+196
+196
+Package_BGA
+Micron_FBGA-78_7.5x10.6mm_Layout9x13_P0.8mm
+FBGA-78, 7.5x10.6mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=24
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+Micron_FBGA-78_8x10.5mm_Layout9x13_P0.8mm
+FBGA-78, 8.0x10.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=25
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+Micron_FBGA-78_9x10.5mm_Layout9x13_P0.8mm
+FBGA-78, 9.0x10.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=23
+BGA 78 0.8 DDR3 DDR3L DDR4
+0
+78
+78
+Package_BGA
+Micron_FBGA-96_7.5x13.5mm_Layout9x16_P0.8mm
+FBGA-96, 7.5x13.5mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=27
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+Micron_FBGA-96_8x14mm_Layout9x16_P0.8mm
+FBGA-96, 8.0x14.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=28
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+Micron_FBGA-96_9x14mm_Layout9x16_P0.8mm
+FBGA-96, 9.0x14.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=26
+BGA 96 0.8 DDR3 DDR3L DDR4
+0
+96
+96
+Package_BGA
+NXP_SOT1982-1_VFBGA-98_7x7mm_Layout13x13_P0.5mm
+NXP VFBGA-98 (Case SOT1982-1), 0.28mm pad, 7x7mm, 98 Ball, 13x13 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT1982-1.pdf
+BGA 98 0.5
+0
+98
+98
+Package_BGA
+NXP_SOT2162-1_VFBGA-59_4x4mm_Layout9x9_P0.4mm
+NXP VFBGA-59 (Case SOT2162-1), 0.24mm pad, 4x4mm, 59 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT2162-1.pdf
+BGA 59 0.4
+0
+59
+59
+Package_BGA
+NXP_VFBGA-42_2.6x3mm_Layout6x7_P0.4mm
+NXP VFBGA-42, 2.6x3.0mm, 42 Ball, 6x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT1963-1.pdf
+BGA 42 0.4
+0
+42
+42
+Package_BGA
+ST_LFBGA-354_16x16mm_Layout19x19_P0.8mm
+ST LFBGA-354, 16.0x16.0mm, 354 Ball, 19x19 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf
+BGA 354 0.8
+0
+354
+354
+Package_BGA
+ST_LFBGA-448_18x18mm_Layout22x22_P0.8mm
+ST LFBGA-448, 18.0x18.0mm, 448 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf
+BGA 448 0.8
+0
+448
+448
+Package_BGA
+ST_TFBGA-169_7x7mm_Layout13x13_P0.5mm
+ST TFBGA-169, 7.0x7.0mm, 169 Ball, 13x13 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u595aj.pdf
+BGA 169 0.5
+0
+169
+169
+Package_BGA
+ST_TFBGA-225_13x13mm_Layout15x15_P0.8mm
+ST TFBGA-225, 13.0x13.0mm, 225 Ball, 15x15 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h7b3ri.pdf
+BGA 225 0.8
+0
+225
+225
+Package_BGA
+ST_TFBGA-257_10x10mm_Layout19x19_P0.5mmP0.65mm
+ST TFBGA-257, 10.0x10.0mm, 257 Ball, 19x19 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf
+BGA 257 0.5
+0
+257
+257
+Package_BGA
+ST_TFBGA-320_11x11mm_Layout21x21_P0.5mm
+ST TFBGA-320, 11.0x11.0mm, 320 Ball, 21x21 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp131c.pdf
+BGA 320 0.5
+0
+320
+320
+Package_BGA
+ST_TFBGA-361_12x12mm_Layout23x23_P0.5mmP0.65mm
+ST TFBGA-361, 12.0x12.0mm, 361 Ball, 23x23 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf
+BGA 361 0.5
+0
+361
+361
+Package_BGA
+ST_UFBGA-59_5x5mm_Layout8x8_P0.5mm
+ST UFBGA-59, 5.0x5.0mm, 59 Ball, 8x8 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wba55ug.pdf
+BGA 59 0.5
+0
+59
+59
+Package_BGA
+ST_UFBGA-73_5x5mm_Layout9x9_P0.5mm
+ST UFBGA-73, 5.0x5.0mm, 73 Ball, 9x9 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wl54jc.pdf
+BGA 73 0.5
+0
+73
+73
+Package_BGA
+ST_UFBGA-81_5x5mm_Layout9x9_P0.5mm
+ST UFBGA-81, 5.0x5.0mm, 81 Ball, 9x9 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u073mb.pdf
+BGA 81 0.5
+0
+81
+81
+Package_BGA
+ST_UFBGA-121_6x6mm_Layout11x11_P0.5mm
+ST UFBGA-121, 6.0x6.0mm, 121 Ball, 11x11 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g473pb.pdf
+BGA 121 0.5
+0
+121
+121
+Package_BGA
+ST_UFBGA-129_7x7mm_Layout13x13_P0.5mm
+ST UFBGA-129, 7.0x7.0mm, 129 Ball, 13x13 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wb55vc.pdf
+BGA 129 0.5
+0
+129
+129
+Package_BGA
+ST_uTFBGA-36_3.6x3.6mm_Layout6x6_P0.5mm
+ST uTFBGA-36, 0.25mm pad, 3.6x3.6mm, 36 Ball, 6x6 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stulpi01a.pdf
+BGA 36 0.5
+0
+36
+36
+Package_BGA
+TFBGA-48_6x10mm_Layout6x8_P0.75mm
+TFBGA-48, NSMD, 6.0x10.0mm, 48 Ball, 6x8 Layout, 0.75mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.jedec.org/system/files/docs/MO-207N.pdf
+BGA 48 0.75 48-ball FBGA
+0
+48
+48
+Package_BGA
+TFBGA-49_3x3mm_Layout7x7_P0.4mm
+TFBGA-49, NSMD, 3.0x3.0mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 49 0.4 49-ball FBGA
+0
+49
+49
+Package_BGA
+TFBGA-64_5x5mm_Layout8x8_P0.5mm
+TFBGA-64, 5.0x5.0mm, 64 Ball, 8x8 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f100v8.pdf#page=83
+BGA 64 0.5
+0
+64
+64
+Package_BGA
+TFBGA-81_5x5mm_Layout9x9_P0.5mm
+TFBGA-81, NSMD, 5.0x5.0mm, 81 Ball, 9x9 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 81 0.5 81-ball FBGA
+0
+81
+81
+Package_BGA
+TFBGA-100_5.5x5.5mm_Layout10x10_P0.5mm
+TFBGA-100, NSMD, 5.5x5.5mm, 100 Ball, 10x10 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 100 0.5 100-ball FBGA
+0
+100
+100
+Package_BGA
+TFBGA-100_8x8mm_Layout10x10_P0.8mm
+TFBGA-100, 8.0x8.0mm, 100 Ball, 10x10 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f746zg.pdf#page=199
+BGA 100 0.8
+0
+100
+100
+Package_BGA
+TFBGA-100_9.0x9.0mm_Layout10x10_P0.8mm
+TFBGA-100, 10x10, 9x9mm package, pitch 0.8mm
+TFBGA-100
+0
+100
+100
+Package_BGA
+TFBGA-121_10x10mm_Layout11x11_P0.8mm
+TFBGA-121, 10.0x10.0mm, 121 Ball, 11x11 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#p495
+BGA 121 0.8
+0
+121
+121
+Package_BGA
+TFBGA-169_9x9mm_Layout13x13_P0.65mm
+TFBGA-169, NSMD, 9.0x9.0mm, 169 Ball, 13x13 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 169 0.65 169-ball FBGA
+0
+169
+169
+Package_BGA
+TFBGA-216_13x13mm_Layout15x15_P0.8mm
+TFBGA-216, 13.0x13.0mm, 216 Ball, 15x15 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f746zg.pdf#page=219
+BGA 216 0.8
+0
+216
+216
+Package_BGA
+TFBGA-225_10x10mm_Layout15x15_P0.65mm
+TFBGA-225, NSMD, 10.0x10.0mm, 225 Ball, 15x15 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 225 0.65 225-ball FBGA
+0
+225
+225
+Package_BGA
+TFBGA-256_13x13mm_Layout16x16_P0.8mm
+TFBGA-256, NSMD, 13.0x13.0mm, 256 Ball, 16x16 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 256 0.8 256-ball FBGA
+0
+256
+256
+Package_BGA
+TFBGA-265_14x14mm_Layout17x17_P0.8mm
+TFBGA-265, 14.0x14.0mm, 265 Ball, 17x17 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00387108.pdf#page=223
+BGA 265 0.8
+0
+265
+265
+Package_BGA
+TFBGA-289_9x9mm_Layout17x17_P0.5mm
+TFBGA-289, 9.0x9.0mm, 289 Ball, 17x17 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32mp131c.pdf
+BGA 289 0.5
+0
+289
+289
+Package_BGA
+TFBGA-324_12x12mm_Layout18x18_P0.65mm
+TFBGA-324, NSMD, 12.0x12.0mm, 324 Ball, 18x18 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 324 0.65 324-ball FBGA
+0
+324
+324
+Package_BGA
+TFBGA-361_13x13mm_Layout19x19_P0.65mm
+TFBGA-361, NSMD, 13.0x13.0mm, 361 Ball, 19x19 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf
+BGA 361 0.65 361-ball FBGA
+0
+361
+361
+Package_BGA
+TFBGA-576_16x16mm_Layout24x24_P0.65mm
+TFBGA-576, NSMD, 16.0x16.0mm, 576 Ball, 24x24 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+BGA 576 0.65 576-ball FBGA
+0
+576
+576
+Package_BGA
+TFBGA-644_19x19mm_Layout28x28_P0.65mm
+TFBGA-636, 19.0x19.0mm, 644 Ball, 28x28 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://opensource.rock-chips.com/images/b/b6/Rockchip_RK3568_Datasheet_V1.3-20220929P.PDF
+BGA 644 0.65 636-ball FBGA Rockchip RK3568 RK3288 Realtek RTD1296 Allwinner A80 A80T
+0
+644
+644
+Package_BGA
+Texas_BGA-289_15x15mm_Layout17x17_P0.8mm
+Texas Instruments BGA-289, 0.4mm pad, 15x15mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ml/mpbg777/mpbg777.pdf
+BGA 289 0.8 ZAV S-PBGA-N289
+0
+289
+289
+Package_BGA
+Texas_DSBGA-5_0.822x1.116mm_Layout2x1x2_P0.4mm
+Texas Instruments, DSBGA, 0.822x1.116mm, 5 bump 2x1x2 array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/opa330.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf)
+Texas Instruments DSBGA BGA YFF S-XBGA-N5
+0
+10
+5
+Package_BGA
+Texas_DSBGA-5_0.8875x1.3875mm_Layout2x3_P0.5mm
+Texas Instruments, DSBGA, area grid, NSMD, YZP0005 pad definition, 0.8875x1.3875mm, 5 Ball, 2x3 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=42, https://www.ti.com/lit/ml/mxbg018l/mxbg018l.pdf
+BGA 5 0.5 YZP
+0
+5
+5
+Package_BGA
+Texas_DSBGA-5_1.5855x1.6365mm_Layout3x2_P0.5mm
+Texas Instruments, DSBGA, area grid, YTA0005 pad definition, 1.5855x1.6365mm, 5 Ball, 3x2 Layout, 0.5mm Pitch, https://www.ti.com/lit/ml/mxbg263/mxbg263.pdf, https://www.ti.com/lit/ds/symlink/lm74.pdf#page=24
+BGA 5 0.5 YTA
+0
+5
+5
+Package_BGA
+Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm
+Texas Instruments, DSBGA, 0.9x1.4mm, 6 bump 2x3 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/ts5a3159a.pdf)
+Texas Instruments DSBGA BGA YZP R-XBGA-N6
+0
+12
+6
+Package_BGA
+Texas_DSBGA-6_0.76x1.16mm_Layout2x3_P0.4mm
+Texas Instruments YFP0006, DSBGA-6, 0.76x1.16mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/ts5a12301e.pdf#page=23
+BGA 6 0.4
+0
+6
+6
+Package_BGA
+Texas_DSBGA-6_0.95x1.488mm_Layout2x3_P0.4mm
+Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ml/mxbg419/mxbg419.pdf, https://www.ti.com/lit/ds/symlink/tmp117.pdf
+BGA 6 0.4
+0
+6
+6
+Package_BGA
+Texas_DSBGA-6_0.704x1.054mm_Layout2x3_P0.35mm
+Texas Instruments, DSBGA-6, 0.704x1.054mm, NSMD, YKA0006-C01 pad definition, 0.704x1.054mm, 6 Ball, 2x3 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/tps62800.pdf
+BGA 6 0.35
+0
+6
+6
+Package_BGA
+Texas_DSBGA-6_0.757x1.01mm_Layout2x3_P0.35mm
+Texas Instruments, DSBGA-6, 0.757x1.01mm, SMD, YKA0006 pad definition, 0.757x1.01mm, 6 Ball, 2x3 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/tps62843.pdf
+BGA 6 0.35 TI 0.787x1.04mm (max)
+0
+12
+6
+Package_BGA
+Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelB
+Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, YFF0006, NSMD pad definition,  https://www.ti.com/lit/ds/symlink/lmg1020.pdf, https://www.ti.com/lit/ml/mxbg078z/mxbg078z.pdf
+BGA 6 0.4 YFF0006
+0
+6
+6
+Package_BGA
+Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelC
+Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, YFF0006, NSMD pad definition,  https://www.ti.com/lit/ds/symlink/lmg1020.pdf, https://www.ti.com/lit/ml/mxbg078z/mxbg078z.pdf
+BGA 6 0.4 YFF0006
+0
+6
+6
+Package_BGA
+Texas_DSBGA-8_0.9x1.9mm_Layout2x4_P0.5mm
+Texas Instruments, DSBGA, 0.9x1.9mm, 8 bump 2x4 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/txb0102.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf)
+Texas Instruments DSBGA BGA YZP R-XBGA-N8
+0
+16
+8
+Package_BGA
+Texas_DSBGA-8_0.705x1.468mm_Layout2x4_P0.4mm
+Texas Instruments, DSBGA, area grid, NSMD, YBJ0008 pad definition, 0.705x1.468mm, 8 Ball, 2x4 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/gpn/ina234
+BGA 8 0.4
+0
+8
+8
+Package_BGA
+Texas_DSBGA-8_1.43x1.41mm_Layout3x3_P0.5mm
+Texas Instruments, DSBGA, 1.43x1.41mm, 8 bump 3x3 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/lmc555.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf)
+Texas Instruments DSBGA BGA YZP R-XBGA-N8
+0
+16
+8
+Package_BGA
+Texas_DSBGA-8_1.5195x1.5195mm_Layout3x3_P0.5mm
+Texas Instruments, DSBGA, area grid, YZR pad definition, 1.5195x1.5195mm, 8 Ball, 3x3 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.ti.com/lit/ml/mxbg270/mxbg270.pdf
+BGA 8 0.5
+0
+8
+8
+Package_BGA
+Texas_DSBGA-9_1.62x1.58mm_Layout3x3_P0.5mm
+Texas Instruments, DSBGA, 1.62mmx1.58mm, area grid, NSMD, YZF0009 pad definition, 1.62x1.58mm, 9 Ball, 3x3 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ml/mxbg027n/mxbg027n.pdf
+BGA 9 0.5
+0
+9
+9
+Package_BGA
+Texas_DSBGA-9_1.4715x1.4715mm_Layout3x3_P0.5mm
+Texas Instruments, DSBGA, 1.4715x1.4715mm, 9 bump 3x3 array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/lm4990.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf)
+Texas Instruments DSBGA BGA YZR0009
+0
+18
+9
+Package_BGA
+Texas_DSBGA-10_1.36x1.86mm_Layout3x4_P0.5mm
+Texas Instruments, DSBGA, area grid, YZP, YZP0010, 1.86x1.36mm, 10 Ball, 3x4 Layout, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/ts3a24159.pdf
+BGA 10 0.5
+0
+20
+10
+Package_BGA
+Texas_DSBGA-12_1.36x1.86mm_Layout3x4_P0.5mm
+Texas Instruments, DSBGA, area grid, YZT, 1.86x1.36mm, 12 Ball, 3x4 Layout, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/txb0104.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf
+BGA 12 0.5 R-XBGA-N12
+0
+24
+12
+Package_BGA
+Texas_DSBGA-16_2.39x2.39mm_Layout4x4_P0.5mm
+Texas Instruments, DSBGA, area grid, YZF, YZF0016, 2.39x2.39mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/dac80508.pdf
+BGA 16 0.5
+0
+32
+16
+Package_BGA
+Texas_DSBGA-28_1.9x3mm_Layout4x7_P0.4mm
+Texas Instruments, DSBGA, area grid, 1.9x3.0mm, 28 Ball, 4x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.ti.com/lit/ds/symlink/bq51050b.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf
+BGA 28 0.4 TI 28-ball YFP R-XBGA-N28
+0
+28
+28
+Package_BGA
+Texas_DSBGA-49_3.33x3.488mm_Layout7x7_P0.4mm
+Texas Instruments, DSBGA, area grid, 3.33x3.488mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.ti.com/lit/ds/symlink/msp430f2234.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf
+BGA 49 0.4
+0
+49
+49
+Package_BGA
+Texas_DSBGA-64_3.415x3.535mm_Layout8x8_P0.4mm
+Texas Instruments, DSBGA, area grid, 3.415x3.535mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.ti.com/lit/ds/slas718g/slas718g.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf
+BGA 64 0.4
+0
+64
+64
+Package_BGA
+Texas_MicroStar_Junior_BGA-12_2.0x2.5mm_Layout4x3_P0.5mm
+Texas Instruments, BGA Microstar Junior, 2x2.5mm, 12 bump 4x3 grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/txb0104.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf)
+Texas_Junior_BGA-12
+0
+12
+12
+Package_BGA
+Texas_MicroStar_Junior_BGA-80_5.0x5.0mm_Layout9x9_P0.5mm
+Texas Instruments, BGA Microstar Junior, 5x5mm, 80 ball 9x9 grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/tlv320aic23b.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf)
+Texas_Junior_BGA-80
+0
+80
+80
+Package_BGA
+Texas_MicroStar_Junior_BGA-113_7x7mm_Layout12x12_P0.5mm
+Texas Instruments, BGA Microstar Junior, NSMD, 7x7mm, 113 Ball, 12x12 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.ti.com/lit/ml/mpbg674/mpbg674.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf
+BGA 113 0.5
+0
+113
+113
+Package_BGA
+Texas_PicoStar_BGA-4_0.758x0.758mm_Layout2x2_P0.4mm
+Texas Instruments PicoStar - 0.15 mm max height, 0.758x0.758mm, 4 Ball, 2x2 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/tmp114.pdf
+BGA 4 0.4 PicoStar
+0
+4
+4
+Package_BGA
+Texas_YFP0020_DSBGA-20_1.588x1.988mm_Layout4x5_P0.4mm
+Texas Instruments, YFP0020, DSBGA-20, area grid, 1.588x1.988mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.ti.com/lit/ds/symlink/txs0206.pdf
+BGA 20 0.4
+0
+20
+20
+Package_BGA
+UCBGA-36_2.5x2.5mm_Layout6x6_P0.4mm
+UCBGA-36, 2.5x2.5mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.latticesemi.com/view_document?document_id=213
+BGA 36 0.4
+0
+36
+36
+Package_BGA
+UCBGA-49_3x3mm_Layout7x7_P0.4mm
+UCBGA-49, 3x3mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.latticesemi.com/view_document?document_id=213
+BGA 49 0.4
+0
+49
+49
+Package_BGA
+UCBGA-81_4x4mm_Layout9x9_P0.4mm
+UCBGA-81, 4x4mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.latticesemi.com/view_document?document_id=213
+BGA 81 0.4
+0
+81
+81
+Package_BGA
+UFBGA-15_3.0x3.0mm_Layout4x4_P0.65mm
+UFBGA-15, 4x4, 3x3mm package, pitch 0.65mm
+UFBGA-15
+0
+15
+15
+Package_BGA
+UFBGA-32_4.0x4.0mm_Layout6x6_P0.5mm
+UFBGA-32, 6x6, 4x4mm package, pitch 0.5mm
+UFBGA-32
+0
+32
+32
+Package_BGA
+UFBGA-64_5x5mm_Layout8x8_P0.5mm
+UFBGA-64, 5.0x5.0mm, 64 Ball, 8x8 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f051t8.pdf#page=91
+BGA 64 0.5
+0
+64
+64
+Package_BGA
+UFBGA-100_7x7mm_Layout12x12_P0.5mm
+UFBGA-100, 7.0x7.0mm, 100 Ball, 12x12 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f103tb.pdf#page=93
+BGA 100 0.5
+0
+100
+100
+Package_BGA
+UFBGA-132_7x7mm_Layout12x12_P0.5mm
+UFBGA-132, 7.0x7.0mm, 132 Ball, 12x12 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l152zc.pdf#page=123
+BGA 132 0.5
+0
+132
+132
+Package_BGA
+UFBGA-132_7x7mm_P0.5mm
+UFBGA 132 Pins, 0.5mm Pitch, 0.3mm Ball, http://www.st.com/resource/en/datasheet/stm32l486qg.pdf
+ufbga bga small-pitch
+0
+132
+132
+Package_BGA
+UFBGA-144_7x7mm_Layout12x12_P0.5mm
+UFBGA-144, 7.0x7.0mm, 144 Ball, 12x12 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f446ze.pdf#page=186
+BGA 144 0.5
+0
+144
+144
+Package_BGA
+UFBGA-144_10x10mm_Layout12x12_P0.8mm
+UFBGA-144, 10.0x10.0mm, 144 Ball, 12x12 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f446ze.pdf#page=189
+BGA 144 0.8
+0
+144
+144
+Package_BGA
+UFBGA-169_7x7mm_Layout13x13_P0.5mm
+UFBGA-169, 7.0x7.0mm, 169 Ball, 13x13 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f429ng.pdf#page=218
+BGA 169 0.5
+0
+169
+169
+Package_BGA
+UFBGA-201_10x10mm_Layout15x15_P0.65mm
+UFBGA-201, 10.0x10.0mm, 201 Ball, 15x15 Layout, 0.65mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f207vg.pdf#page=166
+BGA 201 0.65
+0
+201
+201
+Package_BGA
+VFBGA-49_5.0x5.0mm_Layout7x7_P0.65mm
+VFBGA-49, 7x7, 5x5mm package, pitch 0.65mm
+VFBGA-49
+0
+49
+49
+Package_BGA
+VFBGA-86_6x6mm_Layout10x10_P0.55mm
+VFBGA-86, 6.0x6.0mm, 86 Ball, 10x10 Layout, 0.55mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.dialog-semiconductor.com/sites/default/files/da1469x_datasheet_3v1.pdf#page=740
+BGA 86 0.55
+0
+86
+86
+Package_BGA
+VFBGA-100_7.0x7.0mm_Layout10x10_P0.65mm
+VFBGA-100, 10x10, 7x7mm package, pitch 0.65mm
+VFBGA-100
+0
+100
+100
+Package_BGA
+WLP-4_0.83x0.83mm_P0.4mm
+WLP-4_0.83x0.83mm_P0.4mm https://pdfserv.maximintegrated.com/package_dwgs/21-100107.PDF, https://www.maximintegrated.com/en/app-notes/index.mvp/id/1891
+WLP-4
+0
+4
+4
+Package_BGA
+WLP-4_0.86x0.86mm_P0.4mm
+WLP-4_0.86x0.86mm_P0.4mm https://pdfserv.maximintegrated.com/package_dwgs/21-0612.PDF, https://www.maximintegrated.com/en/app-notes/index.mvp/id/1891
+WLP-4
+0
+4
+4
+Package_BGA
+WLP-4_0.728x0.728mm_Layout2x2_P0.35mm
+WLP-4, 0.728x0.728mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://datasheets.maximintegrated.com/en/ds/MAX40200.pdf
+BGA 4 0.35
+0
+4
+4
+Package_BGA
+WLP-9_1.468x1.448mm_Layout3x3_P0.4mm
+WLP-9, 1.468x1.448mm, 9 Ball, 3x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://pdfserv.maximintegrated.com/package_dwgs/21-100168.PDF
+BGA 9 0.4
+0
+9
+9
+Package_BGA
+XBGA-121_10x10mm_Layout11x11_P0.8mm
+XBGA-121, 10.0x10.0mm, 121 Ball, 11x11 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://ww1.microchip.com/downloads/en/DeviceDoc/39969b.pdf
+BGA 121 0.8
+0
+121
+121
+Package_BGA
+XFBGA-36_3.5x3.5mm_Layout6x6_P0.5mm
+XFBGA-36, https://www.nxp.com/docs/en/package-information/SOT1555-1.pdf
+XFBGA-36
+0
+36
+36
+Package_BGA
+XFBGA-64_5.0x5.0mm_Layout8x8_P0.5mm
+XFBGA-64, https://www.nxp.com/docs/en/package-information/SOT1555-1.pdf
+XFBGA-64
+0
+64
+64
+Package_BGA
+XFBGA-121_8x8mm_Layout11x11_P0.65mm
+XFBGA-121, https://www.nxp.com/docs/en/package-information/SOT1533-1.pdf
+XFBGA-121
+0
+121
+121
+Package_BGA
+Xilinx_CLG225
+Zynq-7000 BGA, NSMD pad definition Appendix A, 13x13mm, 225 Ball, 15x15 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=77
+BGA 225 0.8 C L G 2 2 5
+0
+225
+225
+Package_BGA
+Xilinx_CLG400
+Zynq-7000 BGA, NSMD pad definition Appendix A, 17x17mm, 400 Ball, 20x20 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=78
+BGA 400 0.8 C L G 4 0 0   C L 4 0 0
+0
+400
+400
+Package_BGA
+Xilinx_CLG484_CLG485
+Zynq-7000 BGA, NSMD pad definition Appendix A, 19x19mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=79
+BGA 484 0.8 C L G 4 8 4   C L 4 8 4   C L G 4 8 5   C L 4 8 5
+0
+484
+484
+Package_BGA
+Xilinx_CPG236
+Artix-7 BGA, NSMD pad definition Appendix A, 10x10mm, 238 Ball, 19x19 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=266
+BGA 238 0.5 C P 2 3 6   C P G 2 3 6
+0
+238
+238
+Package_BGA
+Xilinx_CPG238
+Artix-7 BGA, NSMD pad definition Appendix A, 10x10mm, 238 Ball, 19x19 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=267
+BGA 238 0.5 C P G 2 3 8
+0
+238
+238
+Package_BGA
+Xilinx_CPGA196
+Spartan-7 BGA, NSMD pad definition Appendix A, 8x8mm, 196 Ball, 14x14 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=260
+BGA 196 0.5 C P G A 1 9 6
+0
+196
+196
+Package_BGA
+Xilinx_CSG324
+Artix-7 BGA, NSMD pad definition Appendix A, 15x15mm, 324 Ball, 18x18 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=268
+BGA 324 0.8 C S 3 2 4   C S G 3 2 4
+0
+324
+324
+Package_BGA
+Xilinx_CSG325
+Artix-7 BGA, NSMD pad definition Appendix A, 15x15mm, 324 Ball, 18x18 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=268
+BGA 324 0.8 C S 3 2 5   C S G 2 3 5
+0
+324
+324
+Package_BGA
+Xilinx_CSGA225
+Spartan-7 BGA, NSMD pad definition Appendix A, 13x13mm, 225 Ball, 15x15 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=262
+BGA 225 0.8 C S G A 2 2 5
+0
+225
+225
+Package_BGA
+Xilinx_CSGA324
+Spartan-7 BGA, NSMD pad definition Appendix A, 15x15mm, 324 Ball, 18x18 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=263
+BGA 324 0.8 C S G A 3 2 4
+0
+324
+324
+Package_BGA
+Xilinx_FBG484
+Artix-7, Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 23x23mm, 484 Ball, 22x22 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=271, ttps://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=281, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=82
+BGA 484 1 F B 4 8 4   F B G 4 8 4   F B V 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_FBG676
+Artix-7, Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=273, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=284, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=84
+BGA 676 1 F B 6 7 6   F B G 6 7 6   F B V 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_FBG900
+Kintex-7 BGA, NSMD pad definition Appendix A, 31x31mm, 900 Ball, 30x30 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=289
+BGA 900 1 F B 9 0 0   F B G 9 0 0   F B V 9 0 0
+0
+900
+900
+Package_BGA
+Xilinx_FFG676
+Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=292, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=88
+BGA 676 1 F F 6 7 6   F F G 6 7 6   F F V 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_FFG900_FFG901
+Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 31x31mm, 900 Ball, 30x30 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=294, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=90
+BGA 900 1 F F 9 0 0   F F G 9 0 0   F F V 9 0 0   F F 9 0 1   F F G 9 0 1   F F V 9 0 1
+0
+900
+900
+Package_BGA
+Xilinx_FFG1156
+Artix-7, Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 35x35mm, 1156 Ball, 34x34 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=277, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=296, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=91
+BGA 1156 1 F F 1 1 5 6   F F G 1 1 5 6   F F V 1 1 5 6
+0
+1156
+1156
+Package_BGA
+Xilinx_FFG1157_FFG1158
+Virtex-7 BGA, NSMD pad definition Appendix A, 35x35mm, 1156 Ball, 34x34 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=299
+BGA 1156 1 F F 1 1 5 7   F F G 1 1 5 7   F F V 1 1 5 7   F F 1 1 5 8   F F G 1 1 5 8   F F V 1 1 5 8
+0
+1156
+1156
+Package_BGA
+Xilinx_FFG1761
+Virtex-7 BGA, NSMD pad definition Appendix A, 42.5x42.5mm, 1760 Ball, 42x42 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=300
+BGA 1760 1 F F 1 7 6 1   F F G 1 7 6 1
+0
+1760
+1760
+Package_BGA
+Xilinx_FFG1926_FFG1927_FFG1928_FFG1930
+Virtex-7 BGA, NSMD pad definition Appendix A, 45x45mm, 1924 Ball, 44x44 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=303
+BGA 1924 1 F F 1 9 2 6   F F G 1 9 2 6   F F 1 9 2 7   F F G 1 9 2 7   F F V 1 9 2 7   F F 1 9 2 8   F F G 1 9 2 8   F F 1 9 3 0   F F G 1 9 3 0
+0
+1924
+1924
+Package_BGA
+Xilinx_FFV1761
+Virtex-7 BGA, NSMD pad definition Appendix A, 42.5x42.5mm, 1760 Ball, 42x42 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=301
+BGA 1760 1 F F V 1 7 6 1
+0
+1760
+1760
+Package_BGA
+Xilinx_FGG484
+Artix-7 BGA, NSMD pad definition Appendix A, 23x23mm, 484 Ball, 22x22 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=275
+BGA 484 1 F G 4 8 4   F G G 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_FGG676
+Artix-7 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=276
+BGA 676 1 F G 6 7 6   F G G 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_FGGA484
+Spartan-7 BGA, NSMD pad definition Appendix A, 23x23mm, 484 Ball, 22x22 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=264
+BGA 484 1 F G G A 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_FGGA676
+Spartan-7 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=265
+BGA 676 1 F G G A 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_FHG1761
+Virtex-7 BGA, NSMD pad definition Appendix A, 45x45mm, 1760 Ball, 42x42 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=302
+BGA 1760 1 F H 1 7 6 1   F H G 1 7 6 1
+0
+1760
+1760
+Package_BGA
+Xilinx_FLG1925_FLG1926_FLG1928_FLG1930
+Virtex-7 BGA, NSMD pad definition Appendix A, 45x45mm, 1924 Ball, 44x44 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=304
+BGA 1924 1 F L 1 9 2 5   F L G 1 9 2 5   F L 1 9 2 6   F L G 1 9 2 6   F L 1 9 2 8   F L G 1 9 2 8   F L 1 9 3 0   F L G 1 9 3 0
+0
+1924
+1924
+Package_BGA
+Xilinx_FTG256
+Artix-7 BGA, NSMD pad definition Appendix A, 17x17mm, 256 Ball, 16x16 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=269
+BGA 256 1 F T 2 5 6   F T G 2 5 6
+0
+256
+256
+Package_BGA
+Xilinx_FTGB196
+Spartan-7 BGA, NSMD pad definition Appendix A, 15x15mm, 196 Ball, 14x14 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=261
+BGA 196 1 F T G B 1 9 6
+0
+196
+196
+Package_BGA
+Xilinx_RB484
+Artix-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 23x23mm, 484 Ball, 22x22 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=278, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=92
+BGA 484 1 R B 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_RB676
+Artix-7 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=280
+BGA 676 1 R B 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_RF676
+Kintex-7 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=297
+BGA 676 1 R F 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_RF900
+Kintex-7 and Zynq-7000 BGA, NSMD pad definition Appendix A, 31x31mm, 900 Ball, 30x30 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=298, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=94
+BGA 900 1 R F 9 0 0
+0
+900
+900
+Package_BGA
+Xilinx_RF1156
+Zynq-7000 BGA, NSMD pad definition Appendix A, 35x35mm, 1156 Ball, 34x34 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=95
+BGA 1156 1 R F 1 1 5 6
+0
+1156
+1156
+Package_BGA
+Xilinx_RF1157_RF1158
+Virtex-7 BGA, NSMD pad definition Appendix A, 35x35mm, 1156 Ball, 34x34 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=305
+BGA 1156 1 R F 1 1 5 7   R F 1 1 5 8
+0
+1156
+1156
+Package_BGA
+Xilinx_RF1761
+Virtex-7 BGA, NSMD pad definition Appendix A, 42.5x42.5mm, 1760 Ball, 42x42 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=306
+BGA 1760 1 R F 1 7 6 1
+0
+1760
+1760
+Package_BGA
+Xilinx_RF1930
+Virtex-7 BGA, NSMD pad definition Appendix A, 45x45mm, 1924 Ball, 44x44 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=307
+BGA 1924 1 R F 1 9 3 0
+0
+1924
+1924
+Package_BGA
+Xilinx_RFG676
+Zynq-7000 BGA, NSMD pad definition Appendix A, 27x27mm, 676 Ball, 26x26 Layout, 1mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=93
+BGA 676 1 R F 6 7 6   R F G 6 7 6
+0
+676
+676
+Package_BGA
+Xilinx_RS484
+Artix-7 BGA, NSMD pad definition Appendix A, 19x19mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=279
+BGA 484 0.8 R S 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_SBG484
+Artix-7 BGA, NSMD pad definition Appendix A, 19x19mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=270
+BGA 484 0.8 S B 4 8 4   S B G 4 8 4   S B V 4 8 4
+0
+484
+484
+Package_BGA
+Xilinx_SBG485
+Zynq-7000 BGA, NSMD pad definition Appendix A, 19x19mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=80
+BGA 484 0.8 S B G 4 8 5   S B V 4 8 5
+0
+484
+484
+Package_CSP
+Analog_LFCSP-8-1EP_3x3mm_P0.5mm_EP1.53x1.85mm
+LFCSP, exposed pad, Analog Devices (http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5542.pdf)
+LFCSP 8 0.5
+0
+12
+5
+Package_CSP
+Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+Analog  LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_23.pdf, CP-16-23), generated with kicad-footprint-generator ipc_noLead_generator.py
+Analog LFCSP NoLead
+0
+21
+17
+Package_CSP
+Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias
+Analog  LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_23.pdf, CP-16-23), generated with kicad-footprint-generator ipc_noLead_generator.py
+Analog LFCSP NoLead
+0
+31
+17
+Package_CSP
+Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.35x2.35mm
+Analog  LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_20.pdf, CP-16-20), generated with kicad-footprint-generator ipc_noLead_generator.py
+Analog LFCSP NoLead
+0
+21
+17
+Package_CSP
+Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.35x2.35mm_ThermalVias
+Analog  LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_20.pdf, CP-16-20), generated with kicad-footprint-generator ipc_noLead_generator.py
+Analog LFCSP NoLead
+0
+31
+17
+Package_CSP
+Analog_LFCSP-UQ-10_1.3x1.6mm_P0.4mm
+Analog  LFCSP-UQ, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_10_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Analog LFCSP-UQ NoLead
+0
+10
+10
+Package_CSP
+Anpec_WLCSP-20_1.76x2.03mm_Layout4x5_P0.4mm
+WLCSP-20, 1.76x2.03mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.lcsc.com/datasheet/lcsc_datasheet_2007032014_Anpec-Elec-APW7261HAI-TRG_C691404.pdf
+CSP 20 0.4
+0
+20
+20
+Package_CSP
+Dialog_WLCSP-34_4.54x1.66mm_Layout17x4_P0.25x0.34mm
+Dialog Semiconductor (Renesas) WLCSP-34, staggered array, 4.54x1.66mm, 34 Ball, 17x4 Layout, 0.25x0.34mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.renesas.com/us/en/document/dst/da7212-datasheet
+CSP 34 0.25x0.34 34-ball
+0
+34
+34
+Package_CSP
+DiodesInc_GEA20_WLCSP-20_1.7x2.1mm_Layout4x5_P0.4mm
+Diodes Incorporated WLCSP-20, GEA20, 1.7x2.1mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.diodes.com/assets/Package-Files/GEA20.pdf
+CSP 20 0.4
+0
+20
+20
+Package_CSP
+Efinix_WLCSP-64_3.5353x3.3753mm_Layout8x8_P0.4mm
+Efinix WLCSP, NSMD pad definition Page 60, 3.5353x3.3753mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf#page=9
+CSP 64 0.4 64-ball WLCSP
+0
+64
+64
+Package_CSP
+Efinix_WLCSP-80_4.4567x3.5569mm_Layout10x8_P0.4mm
+WLCSP-80, NSMD pad definition Page 54, 4.4567x3.5569mm, 80 Ball, 10x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.efinixinc.com/docs/trion-packaging-ug-v4.9.pdf
+CSP 80 0.4 80-ball WLCSP
+0
+80
+80
+Package_CSP
+LFCSP-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
+LFCSP, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_6_3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+11
+7
+Package_CSP
+LFCSP-8-1EP_3x2mm_P0.5mm_EP1.6x1.65mm
+LFCSP 8pin Pitch 0.5mm, http://www.analog.com/media/en/package-pcb-resources/package/57080735642908cp_8_4.pdf
+LFCSP 8pin thermal pad 3x2mm Pitch 0.5mm
+0
+9
+9
+Package_CSP
+LFCSP-8-1EP_3x3mm_P0.5mm_EP1.6x2.34mm
+LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_11.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+13
+9
+Package_CSP
+LFCSP-8-1EP_3x3mm_P0.5mm_EP1.6x2.34mm_ThermalVias
+LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_11.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+20
+9
+Package_CSP
+LFCSP-8-1EP_3x3mm_P0.5mm_EP1.45x1.74mm
+LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-8/CP_8_13.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+13
+9
+Package_CSP
+LFCSP-8_2x2mm_P0.5mm
+LFCSP 8pin Pitch 0.5mm, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_8_6.pdf
+LFCSP 8pin 2x2mm Pitch 0.5mm
+0
+8
+8
+Package_CSP
+LFCSP-10_2x2mm_P0.5mm
+LFCSP, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-10/cp_10_11.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+10
+10
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_21.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm_ThermalVias
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_21.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+26
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.5x1.5mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp_16_27.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_22.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_22.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+26
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/HMC7992.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias
+LFCSP, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/HMC7992.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+26
+17
+Package_CSP
+LFCSP-16-1EP_3x3mm_P0.5mm_EP1.854x1.854mm
+16-Lead Lead Frame Chip Scale Package, 3x3mm, 0.5mm pitch, 1.854mm thermal pad (CP-16-22, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_22.pdf)
+LFCSP 16 0.5
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+LFCSP, 16 pin, 4x4mm, 2.1mm sq pad (http://www.analog.com/media/en/technical-documentation/data-sheets/ADG633.pdf)
+LFCSP 16 0.65
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_4x4mm_P0.65mm_EP2.4x2.4mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_4x4mm_P0.65mm_EP2.4x2.4mm_ThermalVias
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+31
+17
+Package_CSP
+LFCSP-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp_16_17.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+21
+17
+Package_CSP
+LFCSP-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm_ThermalVias
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp_16_17.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+31
+17
+Package_CSP
+LFCSP-16_3x3mm_P0.5mm
+LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_32.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+16
+16
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
+LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead MO-220-WGGD-1
+0
+25
+21
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead MO-220-WGGD-1
+0
+27
+21
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+LFCSP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+25
+21
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias
+LFCSP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+35
+21
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+25
+21
+Package_CSP
+LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+35
+21
+Package_CSP
+LFCSP-24-1EP_4x4mm_P0.5mm_EP0.5x0.5mm
+LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-24/CP_24_25.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+26
+25
+Package_CSP
+LFCSP-24-1EP_4x4mm_P0.5mm_EP2.3x2.3mm
+LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+29
+25
+Package_CSP
+LFCSP-24-1EP_4x4mm_P0.5mm_EP2.3x2.3mm_ThermalVias
+LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+39
+25
+Package_CSP
+LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+29
+25
+Package_CSP
+LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias
+LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+39
+25
+Package_CSP
+LFCSP-28-1EP_5x5mm_P0.5mm_EP3.14x3.14mm
+LFCSP, 28 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-28/CP_28_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+33
+29
+Package_CSP
+LFCSP-28-1EP_5x5mm_P0.5mm_EP3.14x3.14mm_ThermalVias
+LFCSP, 28 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-28/CP_28_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+43
+29
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/414143737956480539664569cp_32_2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+42
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/414143737956480539664569cp_32_2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+59
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
+LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/3416438741201015623cp_32_4.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+37
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/3416438741201015623cp_32_4.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+47
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm
+LFCSP, 32 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7280.PDF#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+37
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias
+LFCSP, 32 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7280.PDF#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+47
+33
+Package_CSP
+LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm
+32-Lead Frame Chip Scale Package LFCSP (5mm x 5mm); (see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-32/CP_32_27.pdf
+LFCSP 0.5
+0
+37
+33
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP3.9x3.9mm
+LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_40_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+45
+41
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP3.9x3.9mm_ThermalVias
+LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_40_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+55
+41
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
+LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/CP_40_15.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+45
+41
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias
+LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/CP_40_15.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+55
+41
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP4.65x4.65mm
+LFCSP, 40 Pin (https://www.jedec.org/system/files/docs/MO-220K01.pdf (variation VJJD-5)), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+45
+41
+Package_CSP
+LFCSP-40-1EP_6x6mm_P0.5mm_EP4.65x4.65mm_ThermalVias
+LFCSP, 40 Pin (https://www.jedec.org/system/files/docs/MO-220K01.pdf (variation VJJD-5)), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+55
+41
+Package_CSP
+LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm
+LFCSP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+58
+49
+Package_CSP
+LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias
+LFCSP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+75
+49
+Package_CSP
+LFCSP-56-1EP_8x8mm_P0.5mm_EP6.6x6.6mm
+LFCSP, 56 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-56/CP_56_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead Analog-LFCSP_WQ-CP-56-9 JEDEC-MO-220-WLLD-5-Modified-EP-size
+0
+66
+57
+Package_CSP
+LFCSP-56-1EP_8x8mm_P0.5mm_EP6.6x6.6mm_ThermalVias
+LFCSP, 56 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-56/CP_56_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead Analog-LFCSP_WQ-CP-56-9 JEDEC-MO-220-WLLD-5-Modified-EP-size
+0
+76
+57
+Package_CSP
+LFCSP-64-1EP_9x9mm_P0.5mm_EP5.21x5.21mm
+LFCSP, 64 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_64_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+69
+65
+Package_CSP
+LFCSP-64-1EP_9x9mm_P0.5mm_EP5.21x5.21mm_ThermalVias
+LFCSP, 64 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_64_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+86
+65
+Package_CSP
+LFCSP-72-1EP_10x10mm_P0.5mm_EP5.3x5.3mm
+LFCSP, 72 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1452_1451_1450.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+82
+73
+Package_CSP
+LFCSP-72-1EP_10x10mm_P0.5mm_EP5.3x5.3mm_ThermalVias
+LFCSP, 72 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1452_1451_1450.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP NoLead
+0
+99
+73
+Package_CSP
+LFCSP-72-1EP_10x10mm_P0.5mm_EP6.15x6.15mm
+72-Lead Frame Chip Scale Package - 10x10x0.9 mm Body [LFCSP]; (see https://www.intersil.com/content/dam/Intersil/documents/l72_/l72.10x10c.pdf)
+LFCSP 0.5
+0
+77
+73
+Package_CSP
+LFCSP-VQ-24-1EP_4x4mm_P0.5mm_EP2.642x2.642mm
+LFCSP VQ, 24 pin, exposed pad, 4x4mm body, pitch 0.5mm (http://www.analog.com/media/en/package-pcb-resources/package/56702234806764cp_24_3.pdf, http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5801.pdf)
+LFCSP 0.5
+0
+29
+25
+Package_CSP
+LFCSP-VQ-48-1EP_7x7mm_P0.5mm
+LFCSP VQ, 48 pin, exposed pad, 7x7mm body (http://www.analog.com/media/en/technical-documentation/data-sheets/AD7951.pdf, http://www.analog.com/en/design-center/packaging-quality-symbols-footprints/symbols-and-footprints/AD7951.html)
+LFCSP 48
+0
+65
+49
+Package_CSP
+LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm
+LFCSP-WD, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_19.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP-WD NoLead
+0
+15
+9
+Package_CSP
+LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm_ThermalVias
+LFCSP-WD, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_19.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP-WD NoLead
+0
+22
+9
+Package_CSP
+LFCSP-WD-10-1EP_3x3mm_P0.5mm_EP1.64x2.38mm
+LFCSP-WD, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-10/CP_10_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP-WD NoLead
+0
+17
+11
+Package_CSP
+LFCSP-WD-10-1EP_3x3mm_P0.5mm_EP1.64x2.38mm_ThermalVias
+LFCSP-WD, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-10/CP_10_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LFCSP-WD NoLead
+0
+24
+11
+Package_CSP
+Macronix_WLCSP-12_2.02x2.09mm_Layout4x4_P0.5mm
+WLCSP-12, 2.02x2.09mm, 12 Ball, 4x4 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.macronix.com/Lists/Datasheet/Attachments/8909/MX25U3232F,%201.8V,%2032Mb,%20v1.2.pdf#page=93
+CSP 12 0.5
+0
+12
+12
+Package_CSP
+Maxim_WLCSP-35_2.998x2.168mm_Layout7x5_P0.4mm
+WLCSP-35, 2.998x2.168mm, 35 Ball, 7x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://pdfserv.maximintegrated.com/package_dwgs/21-100489.PDF
+CSP 35 0.4
+0
+35
+35
+Package_CSP
+NXP_SOT1444-5_WLCSP-49_3.44x3.44mm_Layout7x7_P0.4mm
+NXP WLCSP49 (Case SOT1444-5), 0.24mm pad, 3.44x3.44mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT1444-5.pdf
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+NXP_SOT1450-2_WLCSP-100_5.07x5.07mm_Layout10x10_P0.5mm
+NXP WLCSP100 (Case SOT1450-2), 0.28mm pad, 5.07x5.07mm, 100 Ball, 10x10 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.nxp.com/docs/en/package-information/SOT1450-2.pdf
+CSP 100 0.5
+0
+100
+100
+Package_CSP
+Nexperia_WLCSP-15_2.37x1.17mm_Layout6x3_P0.4mmP0.8mm
+Nexperia wafer level chip-size package; 15 bumps (6-3-6), 2.37x1.17mm, 15 Ball, 6x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf
+CSP 15 0.4
+0
+15
+15
+Package_CSP
+OnSemi_ODCSP8_BGA-8_3.16x3.16mm_Layout3x3_P1.26mm
+OnSemi ODCSP8 (Case 570CS), 0.27mm pad, 3.16x3.16mm, 8 Ball, 3x3 Layout, 1.26mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.onsemi.com/pub/Collateral/570CS.PDF
+CSP 8 1.26
+0
+8
+8
+Package_CSP
+OnSemi_ODCSP8_BGA-8_3.16x3.16mm_Layout3x3_P1.26mm_ManualAssembly
+OnSemi ODCSP8 (Case 570CS), 0.46mm pad, manual assembly variant (larger pads), 3.16x3.16mm, 8 Ball, 3x3 Layout, 1.26mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.onsemi.com/pub/Collateral/570CS.PDF
+CSP 8 1.26
+0
+8
+8
+Package_CSP
+OnSemi_ODCSP36_BGA-36_6.13x6.13mm_Layout6x6_P1.0mm
+OnSemi ODCSP36 (Case 570CP), 0.27mm pad, 6.13x6.13mm, 36 Ball, 6x6 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.onsemi.com/pub/Collateral/570CP.PDF
+CSP 36 1.0
+0
+36
+36
+Package_CSP
+OnSemi_ODCSP36_BGA-36_6.13x6.13mm_Layout6x6_P1.0mm_ManualAssembly
+OnSemi ODCSP36 (Case 570CP), 0.47mm pad, manual assembly variant (larger pads), 6.13x6.13mm, 36 Ball, 6x6 Layout, 1.0mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.onsemi.com/pub/Collateral/570CP.PDF
+CSP 36 1.0
+0
+36
+36
+Package_CSP
+ST_WLCSP-12_1.7x1.42mm_Layout4x6_P0.35mm_Stagger
+ST WLCSP-12, ST Die ID 443, 1.7x1.42mm, 12 Ball, Y-staggered 4x6 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32c011d6.pdf
+CSP 12 0.35
+0
+12
+12
+Package_CSP
+ST_WLCSP-18_1.86x2.14mm_Layout7x5_P0.4mm_Stagger
+ST WLCSP-18, ST Die ID 466, 1.86x2.14mm, 18 Ball, X-staggered 7x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g031y8.pdf
+CSP 18 0.4
+0
+18
+18
+Package_CSP
+ST_WLCSP-20_1.94x2.4mm_Layout4x5_P0.4mm
+ST WLCSP-20, ST die ID 456, 1.94x2.4mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102
+CSP 20 0.4
+0
+20
+20
+Package_CSP
+ST_WLCSP-25_2.3x2.48mm_Layout5x5_P0.4mm
+ST WLCSP-25, ST die ID 460, 2.3x2.48mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g071eb.pdf
+CSP 25 0.4
+0
+25
+25
+Package_CSP
+ST_WLCSP-25_2.33x2.24mm_Layout5x5_P0.4mm
+ST WLCSP-25, ST Die ID 474, 2.33x2.24mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h503eb.pdf
+CSP 25 0.4
+0
+25
+25
+Package_CSP
+ST_WLCSP-25_Die425
+WLCSP-25, 2.097x2.493mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l031f6.pdf#page=112
+CSP 25 0.4
+0
+25
+25
+Package_CSP
+ST_WLCSP-25_Die444
+WLCSP-25, 2.423x2.325mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f031k6.pdf#page=93
+CSP 25 0.4
+0
+25
+25
+Package_CSP
+ST_WLCSP-25_Die457
+WLCSP-25, 2.133x2.07mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l011k3.pdf#page=100
+CSP 25 0.4
+0
+25
+25
+Package_CSP
+ST_WLCSP-27_2.34x2.55mm_Layout9x6_P0.4mm_Stagger
+ST WLCSP-27, ST Die ID 459, 2.34x2.55mm, 27 Ball, X-staggered 9x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u031g6.pdf
+CSP 27 0.4
+0
+27
+27
+Package_CSP
+ST_WLCSP-36_2.58x3.07mm_Layout6x6_P0.4mm
+ST WLCSP-36, ST die ID 464, 2.58x3.07mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32l412t8.pdf
+CSP 36 0.4
+0
+36
+36
+Package_CSP
+ST_WLCSP-36_Die417
+WLCSP-36, 2.61x2.88mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l052t8.pdf#page=123
+CSP 36 0.4
+0
+36
+36
+Package_CSP
+ST_WLCSP-36_Die440
+WLCSP-36, 2.605x2.703mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f051t8.pdf#page=103
+CSP 36 0.4
+0
+36
+36
+Package_CSP
+ST_WLCSP-36_Die445
+WLCSP-36, 2.605x2.703mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f042k6.pdf#page=96
+CSP 36 0.4
+0
+36
+36
+Package_CSP
+ST_WLCSP-36_Die458
+WLCSP-36, 2.553x2.579mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f410t8.pdf#page=119
+CSP 36 0.4
+0
+36
+36
+Package_CSP
+ST_WLCSP-41_2.98x2.76mm_Layout13x7_P0.4mm_Stagger
+ST WLCSP-41, 2.98x2.76mm, 41 Ball, X-staggered 13x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wba55hg.pdf#page=140
+CSP 41 0.4
+0
+41
+41
+Package_CSP
+ST_WLCSP-42_2.93x2.82mm_Layout12x7_P0.4mm_Stagger
+ST WLCSP-42, ST Die ID 489, 2.93x2.82mm, 42 Ball, X-staggered 12x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u073rc.pdf
+CSP 42 0.4
+0
+42
+42
+Package_CSP
+ST_WLCSP-49_3.3x3.38mm_Layout7x7_P0.4mm_Offcenter
+ST WLCSP-49, off-center ball grid, ST die ID 494, 3.3x3.38mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wb15cc.pdf#page=119
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_3.15x3.13mm_Layout7x7_P0.4mm
+ST WLCSP-49, ST die ID 468, 3.15x3.13mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g431c6.pdf
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die423
+WLCSP-49, 2.965x2.965mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f401vc.pdf#page=115
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die431
+WLCSP-49, 2.999x3.185mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f411vc.pdf#page=124
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die433
+WLCSP-49, 3.029x3.029mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f401ce.pdf#page=116
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die435
+WLCSP-49, 3.141x3.127mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00257211.pdf#page=191
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die438
+WLCSP-49, 3.89x3.74mm, 49 Ball, 7x7 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f303r8.pdf#page=112
+CSP 49 0.5
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die439
+WLCSP-49, 3.417x3.151mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f301r8.pdf#page=117
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die447
+WLCSP-49, 3.294x3.258mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l072kz.pdf#page=134
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-49_Die448
+WLCSP-49, 3.277x3.109mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f071v8.pdf#page=106
+CSP 49 0.4
+0
+49
+49
+Package_CSP
+ST_WLCSP-52_3.09x3.15mm_Layout13x8_P0.4mm_Stagger
+ST WLCSP-52, ST die ID 467, 3.09x3.15mm, 52 Ball, X-staggered 13x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g0b1ne.pdf#page=136
+CSP 52 0.4
+0
+52
+52
+Package_CSP
+ST_WLCSP-56_3.38x3.38mm_Layout14x8_P0.4mm_Stagger
+ST WLCSP-56, ST die ID 455, 3.38x3.38mm, 56 Ball, X-staggered 14x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u535je.pdf
+CSP 56 0.4
+0
+56
+56
+Package_CSP
+ST_WLCSP-63_Die427
+WLCSP-63, 3.228x4.164mm, 63 Ball, 7x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l151cc.pdf#page=125
+CSP 63 0.4
+0
+63
+63
+Package_CSP
+ST_WLCSP-64_3.56x3.52mm_Layout8x8_P0.4mm
+ST WLCSP-64, ST die ID 479, 3.56x3.52mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g491re.pdf
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die414
+WLCSP-64, 4.466x4.395mm, 64 Ball, 8x8 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f103ze.pdf#page=120
+CSP 64 0.5
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die427
+WLCSP-64, 4.539x4.911mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l152zc.pdf#page=126
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die435
+WLCSP-64, 3.141x3.127mm, 64 Ball, 8x8 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00257211.pdf#page=188
+CSP 64 0.35
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die436
+WLCSP-64, 4.539x4.911mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l152zd.pdf#page=143
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die441
+WLCSP-64, 3.623x3.651mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00213872.pdf#page=167
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die442
+WLCSP-64, 3.347x3.585mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f091vb.pdf#page=109
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-64_Die462
+WLCSP-64, 3.357x3.657mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00340475.pdf#page=189
+CSP 64 0.4
+0
+64
+64
+Package_CSP
+ST_WLCSP-66_Die411
+WLCSP-66, 3.639x3.971mm, 66 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f207vg.pdf#page=154
+CSP 66 0.4
+0
+66
+66
+Package_CSP
+ST_WLCSP-66_Die432
+WLCSP-66, 3.767x4.229mm, 66 Ball, 8x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f378vc.pdf#page=114
+CSP 66 0.4
+0
+66
+66
+Package_CSP
+ST_WLCSP-72_3.38x3.38mm_Layout16x9_P0.35mm_Stagger
+ST WLCSP-72, ST die ID 455, 3.38x3.38mm, 72 Ball, X-staggered 16x9 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u535je.pdf
+CSP 72 0.35
+0
+72
+72
+Package_CSP
+ST_WLCSP-72_Die415
+WLCSP-72, 4.4084x3.7594mm, 72 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l476me.pdf#page=255
+CSP 72 0.4
+0
+72
+72
+Package_CSP
+ST_WLCSP-80_3.5x3.27mm_Layout10x16_P0.35mm_Stagger_Offcenter
+ST WLCSP-80, ST die ID 484, 3.5x3.27mm, 80 Ball, Y-staggered 10x16 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h563mi.pdf
+CSP 80 0.35
+0
+80
+80
+Package_CSP
+ST_WLCSP-81_4.02x4.27mm_Layout9x9_P0.4mm
+ST WLCSP-81, ST die ID 469, 4.02x4.27mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32g483me.pdf
+CSP 81 0.4
+0
+81
+81
+Package_CSP
+ST_WLCSP-81_4.36x4.07mm_Layout9x9_P0.4mm
+ST WLCSP-81, ST die ID 472, 4.36x4.07mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32l562ce.pdf
+CSP 81 0.4
+0
+81
+81
+Package_CSP
+ST_WLCSP-81_Die415
+WLCSP-81, 4.4084x3.7594mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l476me.pdf#page=252
+CSP 81 0.4
+0
+81
+81
+Package_CSP
+ST_WLCSP-81_Die421
+WLCSP-81, 3.693x3.815mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f446ze.pdf#page=192
+CSP 81 0.4
+0
+81
+81
+Package_CSP
+ST_WLCSP-81_Die463
+WLCSP-81, 4.039x3.951mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00282249.pdf#page=175
+CSP 81 0.4
+0
+81
+81
+Package_CSP
+ST_WLCSP-90_4.2x3.95mm_Layout18x10_P0.4mm_Stagger
+ST WLCSP-90, ST die ID 482, 4.2x3.95mm, 90 Ball, X-staggered 18x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u575og.pdf#page=306
+CSP 90 0.4
+0
+90
+90
+Package_CSP
+ST_WLCSP-90_Die413
+WLCSP-90, 4.223x3.969mm, 90 Ball, 10x9 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f405og.pdf#page=164
+CSP 90 0.4
+0
+90
+90
+Package_CSP
+ST_WLCSP-99_4.42x3.77mm_Layout11x9_P0.35mm
+ST WLCSP-99, ST die ID 415, 4.42x3.77mm, 99 Ball, 11x9 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32l476vg.pdf
+CSP 99 0.35
+0
+99
+99
+Package_CSP
+ST_WLCSP-100_4.4x4.38mm_Layout10x10_P0.4mm_Offcenter
+ST WLCSP-100, off-center ball grid, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32wb55vc.pdf
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-100_4.437x4.456mm_Layout10x10_P0.4mm
+ST WLCSP-100, ST die ID 471, 4.437x4.456mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32l4p5ve.pdf
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-100_Die422
+WLCSP-100, 4.201x4.663mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f302vc.pdf#page=133
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-100_Die446
+WLCSP-100, 4.775x5.041mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f303zd.pdf#page=162
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-100_Die452
+WLCSP-100, 4.201x4.663mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00330506.pdf#page=218
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-100_Die461
+WLCSP-100, 4.618x4.142mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00284211.pdf#page=259
+CSP 100 0.4
+0
+100
+100
+Package_CSP
+ST_WLCSP-101_3.86x3.79mm_Layout11x19_P0.35mm_Stagger
+ST WLCSP-101, ST Die ID 485, 3.86x3.79mm, 101 Ball, Y-staggered 11x19 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h7r3v8.pdf
+CSP 101 0.35
+0
+101
+101
+Package_CSP
+ST_WLCSP-104_Die437
+WLCSP-104, 4.095x5.094mm, 104 Ball, 9x12 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32l152ze.pdf#page=127
+CSP 104 0.4
+0
+104
+104
+Package_CSP
+ST_WLCSP-115_3.73x4.15mm_Layout11x21_P0.35mm_Stagger
+ST WLCSP-115, ST die ID 483, 3.73x4.15mm, 115 Ball, Y-staggered 11x21 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h725vg.pdf
+CSP 115 0.35
+0
+115
+115
+Package_CSP
+ST_WLCSP-115_4.63x4.15mm_Layout21x11_P0.4mm_Stagger
+ST WLCSP-115, ST die ID 461, 4.63x4.15mm, 115 Ball, X-staggered 21x11 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32l496wg.pdf
+CSP 115 0.4
+0
+115
+115
+Package_CSP
+ST_WLCSP-132_4.57x4.37mm_Layout12x11_P0.35mm
+ST WLCSP-132, ST die ID 480, 4.57x4.37mm, 132 Ball, 12x11 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h7a3ai.pdf
+CSP 132 0.35
+0
+132
+132
+Package_CSP
+ST_WLCSP-143_Die419
+WLCSP-143, 4.521x5.547mm, 143 Ball, 11x13 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f429ng.pdf#page=203
+CSP 143 0.4
+0
+143
+143
+Package_CSP
+ST_WLCSP-143_Die449
+WLCSP-143, 4.539x5.849mm, 143 Ball, 11x13 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f746zg.pdf#page=202
+CSP 143 0.4
+0
+143
+143
+Package_CSP
+ST_WLCSP-144_Die470
+WLCSP-144, 5.24x5.24mm, 144 Ball, 12x12 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00366448.pdf#page=295
+CSP 144 0.4
+0
+144
+144
+Package_CSP
+ST_WLCSP-150_5.38x5.47mm_Layout13x23_P0.4mm_Stagger
+ST WLCSP-150, ST die ID 481, 5.38x5.47mm, 150 Ball, Y-staggered 13x23 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u595zj.pdf
+CSP 150 0.4
+0
+150
+150
+Package_CSP
+ST_WLCSP-156_4.96x4.64mm_Layout13x12_P0.35mm
+ST WLCSP-156, ST die ID 450, 4.96x4.64mm, 156 Ball, 13x12 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32h747xi.pdf
+CSP 156 0.35
+0
+156
+156
+Package_CSP
+ST_WLCSP-168_Die434
+WLCSP-168, 4.891x5.692mm, 168 Ball, 12x14 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/stm32f469ni.pdf#page=198
+CSP 168 0.4
+0
+168
+168
+Package_CSP
+ST_WLCSP-180_Die451
+WLCSP-180, 5.537x6.095mm, 180 Ball, 13x14 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.st.com/resource/en/datasheet/DM00273119.pdf#page=240
+CSP 180 0.4
+0
+180
+180
+Package_CSP
+ST_WLCSP-208_5.8x5.6mm_Layout26x16_P0.35mm_Stagger
+ST WLCSP-208, ST die ID 476, 5.8x5.6mm, 208 Ball, X-staggered 26x16 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u5f9bj.pdf
+CSP 208 0.35
+0
+208
+208
+Package_CSP
+ST_WLCSP-208_5.38x5.47mm_Layout26x16_P0.35mm_Stagger
+ST WLCSP-208, ST die ID 481, 5.38x5.47mm, 208 Ball, X-staggered 26x16 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.st.com/resource/en/datasheet/stm32u5a5aj.pdf
+CSP 208 0.35
+0
+208
+208
+Package_CSP
+WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm
+WLCSP-4, 0.64x0.64mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.onsemi.com/pdf/datasheet/ncp163-d.pdf#page=23
+CSP 4 0.35
+0
+4
+4
+Package_CSP
+WLCSP-4_0.89x0.89mm_Layout2x2_P0.5mm
+X1-WLB0909-4, 0.89x0.89mm, 4 Ball, 2x2 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.diodes.com/assets/Datasheets/AP22913.pdf
+CSP 4 0.5
+0
+4
+4
+Package_CSP
+WLCSP-6_1.4x1.0mm_P0.4mm
+6pin Pitch 0.4mm
+6pin Pitch 0.4mm WLCSP
+0
+6
+6
+Package_CSP
+WLCSP-8_1.58x1.63x0.35mm_Layout3x5_P0.35x0.4mm_Ball0.25mm_Pad0.25mm_NSMD
+WLCSP/XFBGA 8-pin package, staggered pins, http://www.adestotech.com/wp-content/uploads/DS-AT25DF041B_040.pdf
+WLCSP WLCSP-8 XFBGA XFBGA-8  CSP BGA Chip-Scale Glass-Top
+0
+8
+8
+Package_CSP
+WLCSP-8_1.551x2.284mm_Layout2x4_P0.5mm
+WLCSP-8, 1.551x2.284mm, 8 Ball, 2x4 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.adestotech.com/wp-content/uploads/AT25SL321_112.pdf#page=75
+CSP 8 0.5
+0
+8
+8
+Package_CSP
+WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm
+WLCSP-9, 1.21x1.22mm, 9 Ball, 3x3 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/wlcspcb/cb_9_3.pdf
+CSP 9 0.4
+0
+9
+9
+Package_CSP
+WLCSP-12_1.56x1.56mm_P0.4mm
+WLCSP 12 1.56x1.56 https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMM150-DS001-01.pdf
+BMM150 WLCSP
+0
+12
+12
+Package_CSP
+WLCSP-12_1.403x1.555mm_Layout6x4_P0.4mm_Stagger
+WLCSP-12, staggered array, 1.403x1.555mm, 12 Ball, X-staggered 6x4 Layout, 0.4mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://ww1.microchip.com/downloads/en/devicedoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=208
+CSP 12 0.4
+0
+12
+12
+Package_CSP
+WLCSP-16_1.409x1.409mm_Layout4x4_P0.35mm
+WLCSP-16, 1.409x1.409mm, 16 Ball, 4x4 Layout, 0.35mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, http://www.latticesemi.com/view_document?document_id=213
+CSP 16 0.35
+0
+16
+16
+Package_CSP
+WLCSP-16_2.225x2.17mm_Layout4x4_P0.5mm
+WLCSP-16 2.225x2.17mm, 2.225x2.17mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://ww1.microchip.com/downloads/en/DeviceDoc/16B_WLCSP_CS_C04-06036c.pdf
+CSP 16 0.5
+0
+16
+16
+Package_CSP
+WLCSP-16_4x4_B2.17x2.32mm_P0.5mm
+WLCSP-16, http://www.nxp.com/documents/data_sheet/LPC1102_1104.pdf, http://www.nxp.com/assets/documents/data/en/application-notes/AN3846.pdf
+WLCSP-16 NXP
+0
+16
+16
+Package_CSP
+WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm
+WLCSP-20, 4x5 raster, 1.934x2.434mm package, pitch 0.4mm; see section 36.2.3 of http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42363-SAM-D11_Datasheet.pdf
+BGA 20 0.4
+0
+20
+20
+Package_CSP
+WLCSP-20_1.994x1.94mm_Layout4x5_P0.4mm
+WLCSP-20, https://www.nxp.com/docs/en/package-information/98ASA00539D.pdf
+WLCSP-20
+0
+20
+20
+Package_CSP
+WLCSP-20_1.994x1.609mm_Layout5x4_P0.4mm
+WLCSP-20, https://www.nxp.com/docs/en/package-information/98ASA00676D.pdf
+WLCSP-20
+0
+20
+20
+Package_CSP
+WLCSP-36_2.82x2.67mm_Layout6x6_P0.4mm
+WLCSP-36, https://www.nxp.com/docs/en/package-information/98ASA00949D.pdf
+WLCSP-36
+0
+36
+36
+Package_CSP
+WLCSP-36_2.374x2.459mm_Layout6x6_P0.35mm
+WLCSP-36, https://www.nxp.com/docs/en/package-information/98ASA00604D.pdf
+WLCSP-36
+0
+36
+36
+Package_CSP
+WLCSP-56_3.170x3.444mm_Layout7x8_P0.4mm
+WLCSP-56, 7x8 raster, 3.170x3.444mm package, pitch 0.4mm; see section 48.2.4 of http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001479B.pdf
+BGA 56 0.4
+0
+56
+56
+Package_CSP
+WLCSP-81_4.41x3.76mm_P0.4mm
+WLCSP-81, 9x9, 0.4mm Pitch, http://www.st.com/content/ccc/resource/technical/document/technical_note/92/30/3c/a1/4c/bb/43/6f/DM00103228.pdf/files/DM00103228.pdf/jcr:content/translations/en.DM00103228.pdf
+WLCSP ST
+0
+81
+81
+Package_CSP
+pSemi_CSP-16_1.64x2.04mm_P0.4mm
+pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf)
+psemi csp 16
+0
+16
+16
+Package_CSP
+pSemi_CSP-16_1.64x2.04mm_P0.4mm_Pad0.18mm
+pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf)
+psemi csp 16
+0
+16
+16
+Package_DFN_QFN
+AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mm
+UFD Package, 4-Lead Plastic QFN (2mm x 2mm), http://ams.com/eng/content/download/950231/2267959/483138
+QFN 0.95
+0
+6
+5
+Package_DFN_QFN
+AO_AOZ666xDI_DFN-8-1EP_3x3mm_P0.65mm_EP1.25x2.7mm
+AO AOZ666xDI DFN, 8 Pin (https://aosmd.com/res/data_sheets/AOZ6663DI-01.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+AO DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+AO_DFN-8-1EP_5.55x5.2mm_P1.27mm_EP4.12x4.6mm
+DD Package; 8-Lead Plastic DFN (5.55mm x 5.2mm), Pin 5-8 connected to EP (http://www.aosmd.com/res/packaging_information/DFN5x6_8L_EP1_P.pdf)
+dfn 
+0
+25
+5
+Package_DFN_QFN
+Analog_QFN-28-36-2EP_5x6mm_P0.5mm
+QFN, 28 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/qfn_28_05-08-1836.pdf)
+QFN NoLead
+0
+38
+30
+Package_DFN_QFN
+ArtInChip_QFN-68-1EP_7x7mm_P0.35mm_EP5.49x5.49mm
+ArtInChip  QFN, 68 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+78
+69
+Package_DFN_QFN
+ArtInChip_QFN-68-1EP_7x7mm_P0.35mm_EP5.49x5.49mm_ThermalVias
+ArtInChip  QFN, 68 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+95
+69
+Package_DFN_QFN
+ArtInChip_QFN-88-1EP_10x10mm_P0.4mm_EP6.74x6.74mm
+ArtInChip  QFN, 88 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+98
+89
+Package_DFN_QFN
+ArtInChip_QFN-88-1EP_10x10mm_P0.4mm_EP6.74x6.74mm_ThermalVias
+ArtInChip  QFN, 88 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+115
+89
+Package_DFN_QFN
+ArtInChip_QFN-100-1EP_12x12mm_P0.4mm_EP7.4x7.4mm
+ArtInChip  QFN, 100 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+110
+101
+Package_DFN_QFN
+ArtInChip_QFN-100-1EP_12x12mm_P0.4mm_EP7.4x7.4mm_ThermalVias
+ArtInChip  QFN, 100 Pin (https://artinchip.com/upload/files/product/20240112/17050529177725663.pdf/#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+ArtInChip QFN NoLead
+0
+127
+101
+Package_DFN_QFN
+Cypress_QFN-56-1EP_8x8mm_P0.5mm_EP6.22x6.22mm_ThermalVias
+56-Lead Plastic Quad Flat, No Lead Package (ML) - 8x8x0.9 mm Body [QFN] (see datasheet at http://www.cypress.com/file/138911/download and app note at http://www.cypress.com/file/140006/download)
+QFN 0.5
+0
+87
+57
+Package_DFN_QFN
+DFN-4_5x7mm_P5.08mm
+DFN, 4 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/TCG/ProductDocuments/DataSheets/DSC1001-3-4-1.8V-3.3V-Low-Power-Precision-CMOS-Oscillators-DS20005529.pdf#page=14), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead Microchip-DFN75-4LD-PL-1
+0
+4
+4
+Package_DFN_QFN
+DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack
+DFN, 6 Pin (http://www.onsemi.com/pub/Collateral/NCP133-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x1.6mm_P0.5mm_EP1.15x1.3mm
+DFN, 6 Pin (https://www.onsemi.com/pdf/datasheet/ncp349-d.pdf#page=12), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x1.8mm_P0.5mm_EP1.2x1.6mm
+DFN, 6 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2018-6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+11
+7
+Package_DFN_QFN
+DFN-6-1EP_2x2mm_P0.5mm_EP0.6x1.37mm
+DFN, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/05081703_C_DC6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x2mm_P0.5mm_EP0.7x1.6mm
+DFN, 6 Pin (http://www.junmintech.com/UploadFiles/Product/20211129145204_37021.pdf#page=10), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x2mm_P0.5mm_EP0.61x1.42mm
+DC6 Package; 6-Lead Plastic DFN (2mm x 2mm) (see Linear Technology DFN_6_05-08-1703.pdf)
+DFN 0.5
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm
+DFN, 6 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2020-6%20(Type%20C).pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
+6-Lead Plastic Dual Flat, No Lead Package (MA) - 2x2x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.65
+0
+9
+7
+Package_DFN_QFN
+DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm
+DFN, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/(DCB6)%20DFN%2005-08-1715%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+11
+7
+Package_DFN_QFN
+DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm
+DFN6 3*3 MM, 0.95 PITCH; CASE 506AH-01 (see ON Semiconductor 506AH.PDF)
+DFN 0.95
+0
+13
+7
+Package_DFN_QFN
+DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm
+DFN, 6 Pin (https://www.silabs.com/documents/public/data-sheets/Si7020-A20.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+11
+7
+Package_DFN_QFN
+DFN-6_1.3x1.2mm_P0.4mm
+6-Lead Plastic DFN (1.3mm x 1.2mm) 
+DFN 0.4
+0
+6
+6
+Package_DFN_QFN
+DFN-6_1.6x1.3mm_P0.4mm
+DFN, 6 Pin (https://www.st.com/resource/en/datasheet/tsv991.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+6
+6
+Package_DFN_QFN
+DFN-8-1EP_1.5x1.5mm_P0.4mm_EP0.7x1.2mm
+DFN, 8 Pin (https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
+DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/506AQ.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead 506AQ
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.6mm
+DFN, 8 Pin (https://www.qorvo.com/products/d/da007268), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+10
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.3mm
+DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/NB3N551-D.PDF#page=7), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.5mm
+DFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8127-AVR-8-bit-Microcontroller-ATtiny4-ATtiny5-ATtiny9-ATtiny10_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
+DFN, 8 Pin (https://www.st.com/resource/en/datasheet/lm2903.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+10
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.7mm
+DFN, 8 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2020-8-Type-E.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+11
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP0.86x1.55mm
+DFN, 8 Pin (https://www.diodes.com/assets/Datasheets/PAM2841.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm
+DFN8 2x2, 0.5P; CASE 506CN (see ON Semiconductor 506CN.PDF)
+DFN 0.5
+0
+11
+9
+Package_DFN_QFN
+DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
+DFN, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/dfn_8_05-08-1719.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+11
+9
+Package_DFN_QFN
+DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mm
+DFN, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/05081702_c_ddb8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead Linear-DDB
+0
+11
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm
+8-Lead Plastic Dual Flat, No Lead Package (8MA2) - 2x3x0.6 mm Body [UDFN] (see Atmel-8815-SEEPROM-AT24CS01-02-Datasheet.pdf)
+DFN 0.5
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm
+DFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_DFN_2x3x0_9_MC_C04-123C.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.6mm
+DFN, 8 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP8904DD/document_id/1244/), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm
+8-Lead Plastic Dual Flat, No Lead Package (8MA2) - 2x3x0.6 mm Body (http://ww1.microchip.com/downloads/en/DeviceDoc/20005010F.pdf)
+DFN 0.5
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm
+8-Lead Plastic Dual Flat, No Lead Package (MC) - 2x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.5
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x2mm_P0.45mm_EP1.66x1.36mm
+DCB Package 8-Lead Plastic DFN (2mm x 3mm) (see Linear Technology DFN_8_05-08-1718.pdf)
+DFN 0.45
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.5mm_EP1.7x2.4mm
+DFN, 8 Pin (https://stcmicro.com/datasheet/STC8G-en.pdf#page=81), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead STC8G1K08A-36I-DFN8
+0
+10
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm
+DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4320fb.pdf#page=10), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+10
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm_ThermalVias
+DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4320fb.pdf#page=10), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+20
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm
+DD Package; 8-Lead Plastic DFN (3mm x 3mm) (see Linear Technology DFN_8_05-08-1698.pdf)
+DFN 0.5
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.65mm_EP1.5x2.25mm
+DFN, 8 Pin (https://www.diodes.com/assets/Package-Files/U-DFN3030-8-Type-E.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.65mm_EP1.7x2.05mm
+DFN, 8 Pin (http://www.ixysic.com/home/pdfs.nsf/www/IX4426-27-28.pdf/$file/IX4426-27-28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm
+8-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.65
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_4x4mm_P0.8mm_EP2.3x3.24mm
+DFN, 8 Pin (https://www.st.com/resource/en/datasheet/ld1086.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm
+8-Lead Plastic Dual Flat, No Lead Package (MD) - 4x4x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.8
+0
+15
+9
+Package_DFN_QFN
+DFN-8-1EP_4x4mm_P0.8mm_EP2.39x2.21mm
+8-Lead Plastic Dual Flat, No Lead Package (MD) - 4x4x0.9 mm Body [DFN] (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF)
+DFN 0.8
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm
+DD Package; 8-Lead Plastic DFN (6mm x 5mm) (see http://www.everspin.com/file/236/download)
+dfn 
+0
+13
+9
+Package_DFN_QFN
+DFN-8-1EP_6x5mm_P1.27mm_EP4x4mm
+DD Package; 8-Lead Plastic DFN (6mm x 5mm) (see http://www.everspin.com/file/236/download)
+dfn 
+0
+25
+9
+Package_DFN_QFN
+DFN-8_2x2mm_P0.5mm
+DFN8 2x2, 0.5P; No exposed pad - Ref http://pdfserv.maximintegrated.com/land_patterns/90-0349.PDF
+DFN 0.5
+0
+8
+8
+Package_DFN_QFN
+DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm
+DFN, 10 Pin (https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+15
+11
+Package_DFN_QFN
+DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm_ThermalVias
+DFN, 10 Pin (https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+22
+11
+Package_DFN_QFN
+DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm
+DDB Package; 10-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_10_05-08-1722.pdf)
+DFN 0.5
+0
+13
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm
+DFN, 10 Pin (https://www.monolithicpower.com/pub/media/document/MPQ2483_r1.05.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+15
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
+10-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.5
+0
+15
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm
+DFN, 10 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22005b.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+15
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm_ThermalVias
+DFN, 10 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22005b.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+20
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm
+DFN, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3471fb.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+15
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm_ThermalVias
+DFN, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3471fb.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+22
+11
+Package_DFN_QFN
+DFN-10-1EP_3x3mm_P0.5mm_EP1.75x2.7mm
+10-Lead Plastic Dual Flat No-Lead Package, 3x3mm Body (see Atmel Appnote 8826)
+DFN 0.5
+0
+15
+11
+Package_DFN_QFN
+DFN-10_2x2mm_P0.4mm
+10-Lead Plastic DFN (2mm x 2mm)  0.40mm pitch
+DFN 10 0.4mm
+0
+10
+10
+Package_DFN_QFN
+DFN-12-1EP_2x3mm_P0.45mm_EP0.64x2.4mm
+DDB Package; 12-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_12_05-08-1723.pdf)
+DFN 0.45
+0
+15
+13
+Package_DFN_QFN
+DFN-12-1EP_3x3mm_P0.5mm_EP1.6x2.5mm
+DFN, 12 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MIC2207-2MHz-3A-PWM-Buck-Regulator-DS20006470A.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+17
+13
+Package_DFN_QFN
+DFN-12-1EP_3x3mm_P0.5mm_EP1.6x2.5mm_ThermalVias
+DFN, 12 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MIC2207-2MHz-3A-PWM-Buck-Regulator-DS20006470A.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+24
+13
+Package_DFN_QFN
+DFN-12-1EP_3x3mm_P0.5mm_EP2.05x2.86mm
+10-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.5
+0
+17
+13
+Package_DFN_QFN
+DFN-12-1EP_3x3mm_P0.45mm_EP1.65x2.38mm
+DFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/DFN_12_05-08-1725.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+17
+13
+Package_DFN_QFN
+DFN-12-1EP_3x3mm_P0.45mm_EP1.65x2.38mm_ThermalVias
+DFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/DFN_12_05-08-1725.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+24
+13
+Package_DFN_QFN
+DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
+DE/UE Package; 12-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1695.pdf)
+DFN 0.5
+0
+21
+13
+Package_DFN_QFN
+DFN-12-1EP_4x4mm_P0.5mm_EP2.66x3.38mm
+DF Package; 12-Lead Plastic DFN (4mm x 4mm) (see Linear Technology 05081733_A_DF12.pdf)
+DFN 0.5
+0
+21
+13
+Package_DFN_QFN
+DFN-12-1EP_4x4mm_P0.65mm_EP2.64x3.54mm
+DFN12, 4x4, 0.65P; CASE 506CE (see ON Semiconductor 506CE.PDF)
+DFN 0.65
+0
+21
+13
+Package_DFN_QFN
+DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm
+DD Package; 14-Lead Plastic DFN (3mm x 3mm) (http://pdfserv.maximintegrated.com/land_patterns/90-0063.PDF)
+DFN 0.40
+0
+19
+15
+Package_DFN_QFN
+DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm
+14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf)
+VDFN DFN 0.65mm
+0
+23
+15
+Package_DFN_QFN
+DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm_ThermalVias
+14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf)
+VDFN DFN 0.65mm
+0
+33
+15
+Package_DFN_QFN
+DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
+DE Package; 14-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf)
+DFN 0.5
+0
+23
+15
+Package_DFN_QFN
+DFN-14_1.35x3.5mm_P0.5mm
+DFN, 14 Pin (https://m.littelfuse.com/media?resourcetype=datasheets&itemid=9fbe09c9-efee-4022-a889-ca0005cd9b07&filename=littelfuse-tvs-diode-array-sp3012-datasheet#page=5), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+14
+14
+Package_DFN_QFN
+DFN-16-1EP_3x4mm_P0.45mm_EP1.7x3.3mm
+DE Package; 16-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_16_05-08-1732.pdf)
+DFN 0.45
+0
+25
+17
+Package_DFN_QFN
+DFN-16-1EP_3x5mm_P0.5mm_EP1.66x4.4mm
+DHC Package; 16-Lead Plastic DFN (5mm x 3mm) (see Linear Technology DFN_16_05-08-1706.pdf)
+DFN 0.5
+0
+27
+17
+Package_DFN_QFN
+DFN-16-1EP_4x5mm_P0.5mm_EP2.44x4.34mm
+DHD Package; 16-Lead Plastic DFN (5mm x 4mm) (see Linear Technology 05081707_A_DHD16.pdf)
+DFN 0.5
+0
+25
+17
+Package_DFN_QFN
+DFN-16-1EP_5x5mm_P0.5mm_EP3.46x4mm
+DH Package; 16-Lead Plastic DFN (5mm x 5mm) (see Linear Technology DFN_16_05-08-1709.pdf)
+DFN 0.5
+0
+26
+17
+Package_DFN_QFN
+DFN-18-1EP_3x5mm_P0.5mm_EP1.66x4.4mm
+DHC Package; 18-Lead Plastic DFN (5mm x 3mm) (see Linear Technology 05081955_0_DHC18.pdf)
+DFN 0.5
+0
+29
+19
+Package_DFN_QFN
+DFN-18-1EP_4x5mm_P0.5mm_EP2.44x4.34mm
+DHD Package; 18-Lead Plastic DFN (5mm x 4mm) (see Linear Technology DFN_18_05-08-1778.pdf)
+DFN 0.5
+0
+27
+19
+Package_DFN_QFN
+DFN-20-1EP_5x6mm_P0.5mm_EP3.24x4.24mm
+DFN20, 6x5, 0.5P; CASE 505AB (see ON Semiconductor 505AB.PDF)
+DFN 0.5
+0
+33
+21
+Package_DFN_QFN
+DFN-22-1EP_5x6mm_P0.5mm_EP3.14x4.3mm
+DFN22 6*5*0.9 MM, 0.5 P; CASE 506AF\xe2\x88\x9201 (see ON Semiconductor 506AF.PDF)
+DFN 0.5
+0
+35
+23
+Package_DFN_QFN
+DFN-24-1EP_4x7mm_P0.5mm_EP2.64x6.44mm
+DKD Package; 24-Lead Plastic DFN (7mm x 4mm) (see Linear Technology DFN_24_05-08-1864.pdf)
+DFN 0.5
+0
+35
+25
+Package_DFN_QFN
+DFN-32-1EP_4x7mm_P0.4mm_EP2.64x6.44mm
+DKD Package; 32-Lead Plastic DFN (7mm x 4mm) (see Linear Technology DFN_32_05-08-1734.pdf)
+DFN 0.4
+0
+43
+33
+Package_DFN_QFN
+DFN-44-1EP_5x8.9mm_P0.4mm_EP3.7x8.4mm
+DFN44 8.9x5, 0.4P; CASE 506BU-01 (see ON Semiconductor 506BU.PDF)
+DFN 0.4
+0
+63
+45
+Package_DFN_QFN
+DFN-S-8-1EP_6x5mm_P1.27mm
+8-Lead Plastic Dual Flat, No Lead Package (MF) - 6x5 mm Body [DFN-S] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 1.27
+0
+16
+9
+Package_DFN_QFN
+DHVQFN-14-1EP_2.5x3mm_P0.5mm_EP1x1.5mm
+DHVQFN, 14 Pin (JEDEC MO-241/VAA, https://assets.nexperia.com/documents/package-information/SOT762-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DHVQFN NoLead
+0
+16
+15
+Package_DFN_QFN
+DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm
+DHVQFN, 16 Pin (JEDEC MO-241/VAB, https://assets.nexperia.com/documents/package-information/SOT763-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DHVQFN NoLead Nexperia_SOT763-1 Texas_BQB0016A
+0
+19
+17
+Package_DFN_QFN
+DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm
+DHVQFN, 20 Pin (JEDEC MO-241/VAC, https://assets.nexperia.com/documents/package-information/SOT764-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+DHVQFN NoLead
+0
+23
+21
+Package_DFN_QFN
+Diodes_DFN1006-3
+DFN package size 1006 3 pins
+DFN package size 1006 3 pins
+0
+3
+3
+Package_DFN_QFN
+Diodes_UDFN-10_1.0x2.5mm_P0.5mm
+U-DFN2510-10 package used by Diodes Incorporated (https://www.diodes.com/assets/Package-Files/U-DFN2510-10-Type-CJ.pdf)
+UDFN-10 U-DFN2510-10 Diodes
+0
+10
+10
+Package_DFN_QFN
+Diodes_UDFN2020-6_Type-F
+U-DFN2020-6 (Type F) (https://www.diodes.com/assets/Package-Files/U-DFN2020-6-Type-F.pdf) 
+U-DFN2020-6 (Type F)
+0
+8
+8
+Package_DFN_QFN
+Diodes_UDFN3810-9_TYPE_B
+9-pin UDFN package, 1.0x3.8mm, (Ref: https://www.diodes.com/assets/Datasheets/D3V3X8U9LP3810.pdf)
+UDFN SMD
+0
+9
+9
+Package_DFN_QFN
+Diodes_ZL32_TQFN-32-1EP_3x6mm_P0.4mm_EP1.25x3.5mm
+Diodes ZL32 TQFN, 32 Pin (https://www.diodes.com/assets/Package-Files/ZL32.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Diodes TQFN NoLead
+0
+41
+33
+Package_DFN_QFN
+EPC_QFN-13-3EP_3.5x5mm_P0.5mm
+EPC QFN-13, 5.0x3.5mm, Pitch 0.5mm, https://epc-co.com/epc/Portals/0/epc/documents/datasheets/EPC23102_datasheet.pdf
+ePower-Stage-IC EPC23102 EPC23103 EPC23104
+0
+62
+13
+Package_DFN_QFN
+HVQFN-16-1EP_3x3mm_P0.5mm_EP1.5x1.5mm
+HVQFN, 16 Pin (https://www.nxp.com/docs/en/package-information/SOT758-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
+HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+34
+25
+Package_DFN_QFN
+HVQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+HVQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias
+HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+34
+25
+Package_DFN_QFN
+HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+44
+25
+Package_DFN_QFN
+HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+HVQFN, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT617-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+42
+33
+Package_DFN_QFN
+HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+HVQFN, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT617-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+59
+33
+Package_DFN_QFN
+HVQFN-40-1EP_6x6mm_P0.5mm_EP4.1x4.1mm
+HVQFN, 40 Pin (https://www.nxp.com/docs/en/package-information/SOT618-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+50
+41
+Package_DFN_QFN
+HVQFN-40-1EP_6x6mm_P0.5mm_EP4.1x4.1mm_ThermalVias
+HVQFN, 40 Pin (https://www.nxp.com/docs/en/package-information/SOT618-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVQFN NoLead
+0
+67
+41
+Package_DFN_QFN
+HXQFN-16-1EP_3x3mm_P0.5mm_EP1.85x1.85mm
+HXQFN, 16 Pin (https://www.nxp.com/docs/en/data-sheet/NX3L4051.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+HXQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+HXQFN-16-1EP_3x3mm_P0.5mm_EP1.85x1.85mm_ThermalVias
+HXQFN, 16 Pin (https://www.nxp.com/docs/en/data-sheet/NX3L4051.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+HXQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+Infineon_MLPQ-16-14-1EP_4x4mm_P0.5mm
+MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134)
+mlpq 32 7x7mm
+0
+19
+15
+Package_DFN_QFN
+Infineon_MLPQ-40-32-1EP_7x7mm_P0.5mm
+MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134)
+mlpq 32 7x7mm
+0
+76
+33
+Package_DFN_QFN
+Infineon_MLPQ-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
+MLPQ 48 leads, 7x7mm (https://www.infineon.com/dgdl/irs2052mpbf.pdf?fileId=5546d462533600a401535675d3b32788)
+mlpq 32 7x7mm
+0
+115
+49
+Package_DFN_QFN
+Infineon_MLPQ-48-1EP_7x7mm_P0.5mm_EP5.55x5.55mm
+MLPQ 48 leads, 7x7mm (https://www.infineon.com/dgdl/irs2093mpbf.pdf?fileId=5546d462533600a401535675fb892793)
+mlpq 32 7x7mm
+0
+113
+49
+Package_DFN_QFN
+Infineon_PQFN-22-15-4EP_6x5mm_P0.65mm
+PQFN 22 leads, 5x6mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4301.pdf?fileId=5546d462533600a4015355d5fc691819, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134)
+pqfn 22 5x6mm
+0
+56
+15
+Package_DFN_QFN
+Infineon_PQFN-44-31-5EP_7x7mm_P0.5mm
+PQFN 44 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4302.pdf?fileId=5546d462533600a4015355d602a9181d, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134)
+pqfn 44 7x7mm
+0
+125
+27
+Package_DFN_QFN
+LQFN-10-1EP_2x2mm_P0.5mm_EP0.7x0.7mm
+LQFN, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081644_0_LQFN10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LQFN NoLead
+0
+12
+11
+Package_DFN_QFN
+LQFN-12-1EP_2x2mm_P0.5mm_EP0.7x0.7mm
+LQFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081530_B_LQFN12.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LQFN NoLead
+0
+14
+13
+Package_DFN_QFN
+LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
+LQFN, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081595_0_lqfn16.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LQFN NoLead
+0
+18
+17
+Package_DFN_QFN
+Linear_DE14MA
+14-Lead Plastic DFN, 4mm x 3mm (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/05081731_C_DE14MA.pdf)
+DFN 0.5
+0
+14
+14
+Package_DFN_QFN
+Linear_UGK52_QFN-46-52
+Linear UKG52(46) package, QFN-52-1EP variant (see http://cds.linear.com/docs/en/datasheet/3886fe.pdf)
+QFN 0.5
+0
+62
+47
+Package_DFN_QFN
+MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm
+MLF, 6 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5353.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+MLF NoLead
+0
+9
+7
+Package_DFN_QFN
+MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm
+8-Pin ePad 3mm x 3mm MLF - 3x3x0.85 mm Body (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf)
+DFN MLF 0.65
+0
+12
+9
+Package_DFN_QFN
+MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm_ThermalVias
+8-Pin ePad 3mm x 3mm MLF - 3x3x0.85 mm Body (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf)
+DFN MLF 0.65
+0
+15
+9
+Package_DFN_QFN
+MLF-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=263), generated with kicad-footprint-generator ipc_noLead_generator.py
+MLF NoLead
+0
+25
+21
+Package_DFN_QFN
+MLF-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=263), generated with kicad-footprint-generator ipc_noLead_generator.py
+MLF NoLead
+0
+30
+21
+Package_DFN_QFN
+MLPQ-16-1EP_4x4mm_P0.65mm_EP2.8x2.8mm
+Micro Leadframe Package, 16 pin with exposed pad
+MLPQ- 0.65
+0
+21
+17
+Package_DFN_QFN
+MPS_QFN-12_2x2mm_P0.4mm
+MPS  QFN, 12 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5087A#page24), generated with kicad-footprint-generator ipc_noLead_generator.py
+MPS QFN NoLead
+0
+12
+12
+Package_DFN_QFN
+Maxim_FC2QFN-14_2.5x2.5mm_P0.5mm
+14-FC2QFN, 14/12 Pin, https://pdfserv.maximintegrated.com/land_patterns/90-100127.PDF
+FC2QFN NoLead
+0
+12
+12
+Package_DFN_QFN
+Maxim_TDFN-6-1EP_3x3mm_P0.95mm_EP1.5x2.3mm
+Maxim  TDFN, 6 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/MAX4460-MAX4462.pdf#page=19, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tdfn-ep/21-0137.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Maxim TDFN NoLead
+0
+11
+7
+Package_DFN_QFN
+Maxim_TDFN-12-1EP_3x3mm_P0.5mm_EP1.7x2.5mm
+Maxim TDFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/land-pattern/tdfn/90-0397.pdf)
+DFN NoLead
+0
+17
+13
+Package_DFN_QFN
+Maxim_TDFN-12-1EP_3x3mm_P0.5mm_EP1.7x2.5mm_ThermalVias
+Maxim TDFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/land-pattern/tdfn/90-0397.pdf)
+DFN NoLead
+0
+23
+13
+Package_DFN_QFN
+Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
+Micrel  MLF, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic23050.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Micrel MLF NoLead
+0
+11
+9
+Package_DFN_QFN
+Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm_ThermalVias
+Micrel  MLF, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic23050.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Micrel MLF NoLead
+0
+16
+9
+Package_DFN_QFN
+Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.8x1.3mm_ThermalVias
+http://ww1.microchip.com/downloads/en/DeviceDoc/mic2290.pdf
+mlf 8 2x2 mm
+0
+14
+9
+Package_DFN_QFN
+Microchip_8E-16
+16-Lead Quad Flat, No Lead Package (8E) - 4x4x0.9 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf)
+QFN Microchip 8E 16
+0
+20
+17
+Package_DFN_QFN
+Microchip_DRQFN-44-1EP_5x5mm_P0.7mm_EP2.65x2.65mm
+QFN, 44 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/44L_VQFN_5x5mm_Dual_Row_%5BS3B%5D_C04-21399a.pdf)
+QFN dual row
+0
+49
+45
+Package_DFN_QFN
+Microchip_DRQFN-44-1EP_5x5mm_P0.7mm_EP2.65x2.65mm_ThermalVias
+QFN, 44 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/44L_VQFN_5x5mm_Dual_Row_%5BS3B%5D_C04-21399a.pdf)
+QFN dual row
+0
+59
+45
+Package_DFN_QFN
+Microchip_DRQFN-64-1EP_7x7mm_P0.65mm_EP4.1x4.1mm
+QFN, 64 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_7x7_Dual_Row_%5BSVB%5D_C04-21420a.pdf)
+QFN dual row
+0
+74
+65
+Package_DFN_QFN
+Microchip_DRQFN-64-1EP_7x7mm_P0.65mm_EP4.1x4.1mm_ThermalVias
+QFN, 64 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_7x7_Dual_Row_%5BSVB%5D_C04-21420a.pdf)
+QFN dual row
+0
+91
+65
+Package_DFN_QFN
+Microsemi_QFN-40-32-2EP_6x8mm_P0.5mm
+40-Lead (32-Lead Populated) Plastic Quad Flat, No Lead Package - 6x8x0.9mm Body (https://www.microsemi.com/document-portal/doc_download/131677-pd70224-data-sheet)
+QFN 0.5
+0
+92
+34
+Package_DFN_QFN
+Mini-Circuits_DL805
+https://ww2.minicircuits.com/case_style/DL805.pdf
+RF Switch
+0
+11
+9
+Package_DFN_QFN
+Mini-Circuits_FG873-4_3x3mm
+Mini Circuits Case style FG (https://ww2.minicircuits.com/case_style/FG873.pdf)
+FG873
+0
+4
+4
+Package_DFN_QFN
+NXP_LQFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_16xMask0.45x0.45
+LQFN, 48 Pin (https://www.nxp.com/docs/en/package-information/98ASA00694D.pdf)
+NXP LQFN NoLead
+0
+65
+49
+Package_DFN_QFN
+NXP_LQFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_16xMask0.45x0.45_ThermalVias
+LQFN, 48 Pin (https://www.nxp.com/docs/en/package-information/98ASA00694D.pdf)
+NXP LQFN NoLead
+0
+75
+49
+Package_DFN_QFN
+Nordic_AQFN-73-1EP_7x7mm_P0.5mm
+http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.nrf52%2Fdita%2Fnrf52%2Fchips%2Fnrf52840.html
+AQFN 7mm 
+0
+78
+74
+Package_DFN_QFN
+Nordic_AQFN-94-1EP_7x7mm_P0.4mm
+aQFN, Nordic, nRF5340, https://infocenter.nordicsemi.com/pdf/nRF5340_PS_v1.2.pdf
+aqfn qfn nordic nrf nrf5340 aqfn94
+0
+103
+95
+Package_DFN_QFN
+OnSemi_DFN-8_2x2mm_P0.5mm
+DFN8 2x2, 0.5P (https://www.onsemi.com/pub/Collateral/511AT.PDF)
+DFN 0.5
+0
+8
+8
+Package_DFN_QFN
+OnSemi_DFN-14-1EP_4x4mm_P0.5mm_EP2.7x3.4mm
+OnSemi  DFN, 14 Pin (https://www.onsemi.com/pub/Collateral/506CM.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+OnSemi DFN NoLead
+0
+24
+15
+Package_DFN_QFN
+OnSemi_SIP-38-6EP-9x7mm_P0.65mm_EP1.2x1.2mm
+On Semiconductor, SIP-38, 9x7mm, (https://www.onsemi.com/pub/Collateral/AX-SIP-SFEU-D.PDF#page=19)
+On Semiconductor SIP
+0
+44
+44
+Package_DFN_QFN
+OnSemi_UDFN-8_1.2x1.8mm_P0.4mm
+8-Lead Plastic Dual Flat, No Lead Package, 1.2x1.8x1.55 mm Body [UDFN] (See http://www.onsemi.com/pub/Collateral/NLSV2T244-D.PDF)
+dfn udfn dual flat
+0
+8
+8
+Package_DFN_QFN
+OnSemi_UDFN-16-1EP_1.35x3.3mm_P0.4mm_EP0.4x2.8mm
+OnSemi  UDFN, 16 Pin (https://www.onsemi.com/pdf/datasheet/cm1624-d.pdf#page=7), generated with kicad-footprint-generator ipc_noLead_generator.py
+OnSemi UDFN NoLead
+0
+20
+17
+Package_DFN_QFN
+OnSemi_VCT-28_3.5x3.5mm_P0.4mm
+OnSemi  VCT, 28 Pin (http://www.onsemi.com/pub/Collateral/601AE.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+OnSemi VCT NoLead
+0
+28
+28
+Package_DFN_QFN
+OnSemi_XDFN-10_1.35x2.2mm_P0.4mm
+10-Lead Plastic XDFN (1.35mm x 2.2mm) (see https://www.onsemi.com/pdf/datasheet/emi8132-d.pdf)
+OnSemi XDFN-10 0.4
+0
+10
+10
+Package_DFN_QFN
+OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm
+XDFN4 footprint (as found on the https://www.onsemi.com/pub/Collateral/NCP115-D.PDF)
+OnSemi XDFN4
+0
+5
+5
+Package_DFN_QFN
+PQFN-8-EP_6x5mm_P1.27mm_Generic
+Universal Footprint for Thermally-enhanced SO-8 packages; compatible with Vishay PowerPAK SO−8, International Rectifier PQFN, Texas Instrument SON 5 × 6 mm (Q5A), Alpha and Omega DFN 5 × 6, ST Microelectronics PowerFLAT™ 5 × 6, Toshiba SOP Advance, Infineon Super SO8, NXP LFPAK (SOT669), Renesas WPAK(3F) / LFPAK, Fairchild Power 56, APEC PMPAK 5 × 6, MagnaChip PowerDFN56, ROHM HSOP8, UBIQ PRPAK56, NIKO−SEM PDFN 5 × 6, NEC 8-pin HVSON. Datasheets: https://www.onsemi.com/pub/Collateral/AND9137-D.PDF, https://assets.nexperia.com/documents/leaflet/75016838.pdf
+Thermally-enhanced SO-8 PowerPAK PQFN Q5A PowerFLAT LFPAK SOT669 WPAK(3F) LFPAK Power56 PMPAK PowerDFN56 HSOP8 PRPAK56 PDFN HVSON
+0
+21
+5
+Package_DFN_QFN
+Panasonic_HQFN-16-1EP_4x4mm_P0.65mm_EP2.9x2.9mm
+Panasonic HQFN-16, 4x4x0.85mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HQFN016-A-0404XZL_EN.pdf)
+panasonic hqfn
+0
+37
+17
+Package_DFN_QFN
+Panasonic_HSON-8_8x8mm_P2.00mm
+Panasonic HSON-8, 8x8x1.25mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HSON008-A-0808XXI_EN.pdf)
+panasonic hson
+0
+27
+9
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm
+QFN, 12 Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+17
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias
+QFN, 12 Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+32
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.45x1.45mm
+QFN, 12 Pin (https://www.st.com/resource/en/datasheet/tcpp01-m12.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead QFN12L
+0
+15
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias
+QFN, 12 Pin (https://www.st.com/resource/en/datasheet/tcpp01-m12.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead QFN12L
+0
+18
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.65x1.65mm
+QFN, 12 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_12_%2005-08-1855.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+17
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.5mm_EP1.65x1.65mm_ThermalVias
+QFN, 12 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_12_%2005-08-1855.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+22
+13
+Package_DFN_QFN
+QFN-12-1EP_3x3mm_P0.51mm_EP1.45x1.45mm
+QFN, 12 Pin (https://ww2.minicircuits.com/case_style/DQ1225.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+17
+13
+Package_DFN_QFN
+QFN-16-1EP_1.8x2.6mm_P0.4mm_EP0.7x1.5mm
+QFN, 16 Pin (https://www.st.com/resource/en/datasheet/stg3692.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead QFN16L
+0
+18
+17
+Package_DFN_QFN
+QFN-16-1EP_1.8x2.6mm_P0.4mm_EP0.7x1.5mm_ThermalVias
+QFN, 16 Pin (https://www.st.com/resource/en/datasheet/stg3692.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead QFN16L
+0
+22
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
+QFN, 16 Pin (https://www.st.com/resource/en/datasheet/tsv521.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias
+QFN, 16 Pin (https://www.st.com/resource/en/datasheet/tsv521.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+26
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm
+QFN, 16 Pin (https://www.nxp.com/docs/en/package-information/98ASA00525D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm_ThermalVias
+QFN, 16 Pin (https://www.nxp.com/docs/en/package-information/98ASA00525D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+26
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm
+QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias
+QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+26
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm
+QFN, 16 Pin (https://www.onsemi.com/pub/Collateral/NCN4555-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias
+QFN, 16 Pin (https://www.onsemi.com/pub/Collateral/NCN4555-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+26
+17
+Package_DFN_QFN
+QFN-16-1EP_3x3mm_P0.5mm_EP1.675x1.675mm
+QFN, 16 Pin (https://media.melexis.com/-/media/files/documents/datasheets/mlx90395-datasheet-melexis.pdf#page=55), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+18
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.5mm_EP2.45x2.45mm
+QFN, 16 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/isl8117.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias
+QFN, 16 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/isl8117.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+QFN, 16 Pin (http://www.thatcorp.com/datashts/THAT_1580_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias
+QFN, 16 Pin (http://www.thatcorp.com/datashts/THAT_1580_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm
+QFN, 16 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=266), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm_ThermalVias
+QFN, 16 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=266), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm
+QFN, 16 Pin (https://www.allegromicro.com/~/media/Files/Datasheets/A4403-Datasheet.ashx), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_PullBack
+QFN, 16 Pin (https://ams.com/documents/20143/36005/AS5055A_DS000304_2-00.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_PullBack_ThermalVias
+QFN, 16 Pin (https://ams.com/documents/20143/36005/AS5055A_DS000304_2-00.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalVias
+QFN, 16 Pin (https://www.allegromicro.com/~/media/Files/Datasheets/A4403-Datasheet.ashx), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.15x2.15mm
+QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4001f.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_4x4mm_P0.65mm_EP2.15x2.15mm_ThermalVias
+QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4001f.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm
+QFN, 16 Pin (http://www.intersil.com/content/dam/Intersil/documents/l16_/l16.5x5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm_ThermalVias
+QFN, 16 Pin (http://www.intersil.com/content/dam/Intersil/documents/l16_/l16.5x5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+17
+Package_DFN_QFN
+QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm
+QFN, 20 Pin (http://www.ti.com/lit/ml/mpqf239/mpqf239.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm_ThermalVias
+QFN, 20 Pin (http://www.ti.com/lit/ml/mpqf239/mpqf239.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm
+QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3553fc.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias
+QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3553fc.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm_ThermalVias
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm
+QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm_ThermalVias
+QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+32
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=274), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=274), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=164), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=164), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+QFN, 20 Pin (https://www.silabs.com/documents/public/data-sheets/Si5351-B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+QFN, 20 Pin (https://www.silabs.com/documents/public/data-sheets/Si5351-B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+30
+21
+Package_DFN_QFN
+QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
+QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1711.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+27
+21
+Package_DFN_QFN
+QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias
+QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1711.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+40
+21
+Package_DFN_QFN
+QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=276), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm_ThermalVias
+QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=276), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+35
+21
+Package_DFN_QFN
+QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm
+QFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm_ThermalVias
+QFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+34
+25
+Package_DFN_QFN
+QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm
+QFN, 24 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+25
+Package_DFN_QFN
+QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm_ThermalVias
+QFN, 24 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+QFN, 24 Pin (https://www.lcsc.com/datasheet/lcsc_datasheet_2006041834_Everanalog-IC-design-EA3058QDR_C575412.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+QFN, 24 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=278), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+QFN, 24 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=278), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm
+QFN, 24 Pin (https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm_ThermalVias
+QFN, 24 Pin (https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+QFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+QFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm
+QFN, 24 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/hmc431.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_ThermalVias
+QFN, 24 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/hmc431.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm
+QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm_ThermalVias
+QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mm
+QFN, 24 Pin (http://www.cypress.com/file/46236/download), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mm_ThermalVias
+QFN, 24 Pin (http://www.cypress.com/file/46236/download), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm
+QFN, 24 Pin (https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm_ThermalVias
+QFN, 24 Pin (https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
+QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_24_05-08-1696.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+31
+25
+Package_DFN_QFN
+QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias
+QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_24_05-08-1696.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+44
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm
+QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UH24)%20QFN%2005-08-1747%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm_ThermalVias
+QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UH24)%20QFN%2005-08-1747%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.4x3.4mm
+QFN, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.4x3.4mm_ThermalVias
+QFN, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.6x3.6mm
+QFN, 24 Pin (https://www.nxp.com/docs/en/package-information/98ASA00734D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+34
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.6x3.6mm_ThermalVias
+QFN, 24 Pin (https://www.nxp.com/docs/en/package-information/98ASA00734D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+51
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.25x3.25mm
+QFN, 24 Pin (https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/44000000MDkO/lWPNMeJClEs8Zvyu7AlDlKSyZqhYdVpQzFLVfUp.EXs), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+QFN-24-1EP_5x5mm_P0.65mm_EP3.25x3.25mm_ThermalVias
+QFN, 24 Pin (https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/44000000MDkO/lWPNMeJClEs8Zvyu7AlDlKSyZqhYdVpQzFLVfUp.EXs), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+39
+25
+Package_DFN_QFN
+QFN-28-1EP_3x6mm_P0.5mm_EP1.7x4.75mm
+QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081926_0_UDE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+37
+29
+Package_DFN_QFN
+QFN-28-1EP_3x6mm_P0.5mm_EP1.7x4.75mm_ThermalVias
+QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081926_0_UDE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+46
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm
+QFN, 28 Pin (http://www.issi.com/WW/pdf/31FL3731.pdf#page=21), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+33
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm_ThermalVias
+QFN, 28 Pin (http://www.issi.com/WW/pdf/31FL3731.pdf#page=21), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+43
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=280), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+33
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm_ThermalVias
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=280), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+43
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+33
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+43
+29
+Package_DFN_QFN
+QFN-28-1EP_4x4mm_P0.45mm_EP2.6x2.6mm
+QFN, 28 Pin (http://www.everest-semi.com/pdf/ES8388%20DS.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+33
+29
+Package_DFN_QFN
+QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
+QFN, 28 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/3555fe.pdf#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+35
+29
+Package_DFN_QFN
+QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias
+QFN, 28 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/3555fe.pdf#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+48
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm
+QFN, 28 Pin (JEDEC MO-220-K.01, variation VHHD-1,  https://www.jedec.org/system/files/docs/MO-220K01.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+QFN, 28 Pin (JEDEC MO-220-K.01, variation VHHD-1,  https://www.jedec.org/system/files/docs/MO-220K01.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+43
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+QFN, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2202_TMC2208_TMC2224_datasheet_rev1.14.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+QFN, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2202_TMC2208_TMC2224_datasheet_rev1.14.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+55
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm
+QFN, 28 Pin (https://www.silabs.com/documents/public/data-sheets/C8051F32x.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias
+QFN, 28 Pin (https://www.silabs.com/documents/public/data-sheets/C8051F32x.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+43
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=283), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=283), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+48
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm
+QFN, 28 Pin (https://www.cmlmicro.com/wp-content/uploads/2017/10/CMX901_ds.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm_ThermalVias
+QFN, 28 Pin (https://www.cmlmicro.com/wp-content/uploads/2017/10/CMX901_ds.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+64
+29
+Package_DFN_QFN
+QFN-28-1EP_5x6mm_P0.5mm_EP3.65x4.65mm
+QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081932_0_UHE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+41
+29
+Package_DFN_QFN
+QFN-28-1EP_5x6mm_P0.5mm_EP3.65x4.65mm_ThermalVias
+QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081932_0_UHE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+54
+29
+Package_DFN_QFN
+QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
+QFN, 28 Pin (https://www.semtech.com/uploads/documents/sx1272.pdf#page=125), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm_ThermalVias
+QFN, 28 Pin (https://www.semtech.com/uploads/documents/sx1272.pdf#page=125), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+55
+29
+Package_DFN_QFN
+QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=289), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+38
+29
+Package_DFN_QFN
+QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm_ThermalVias
+QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=289), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+55
+29
+Package_DFN_QFN
+QFN-28_4x4mm_P0.5mm
+QFN, 28 Pin (http://www.st.com/resource/en/datasheet/stm32f031k6.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+28
+28
+Package_DFN_QFN
+QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8153-8-and-16-bit-avr-microcontroller-xmega-e-atxmega8e5-atxmega16e5-atxmega32e5_datasheet.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+37
+33
+Package_DFN_QFN
+QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm_ThermalVias
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8153-8-and-16-bit-avr-microcontroller-xmega-e-atxmega8e5-atxmega16e5-atxmega32e5_datasheet.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+47
+33
+Package_DFN_QFN
+QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm
+QFN, 32 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/l32.4x4a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+37
+33
+Package_DFN_QFN
+QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm_ThermalVias
+QFN, 32 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/l32.4x4a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+47
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+42
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+52
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf#page=68), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+42
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_ThermalVias
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf#page=68), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+52
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm
+QFN, 32 Pin (http://infocenter.nordicsemi.com/pdf/nRF52810_PS_v1.1.pdf#page=468), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+42
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias
+QFN, 32 Pin (http://infocenter.nordicsemi.com/pdf/nRF52810_PS_v1.1.pdf#page=468), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+52
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm
+QFN, 32 Pin (https://www.espressif.com/sites/default/files/documentation/0a-esp8285_datasheet_en.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+37
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias
+QFN, 32 Pin (https://www.espressif.com/sites/default/files/documentation/0a-esp8285_datasheet_en.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+47
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm
+QFN, 32 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_32_05-08-1693.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+42
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias
+QFN, 32 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_32_05-08-1693.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+52
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm
+QFN, 32 Pin (https://www.exar.com/ds/mxl7704.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+42
+33
+Package_DFN_QFN
+QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm_ThermalVias
+QFN, 32 Pin (https://www.exar.com/ds/mxl7704.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+52
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP4.7x4.7mm
+QFN, 32 Pin (https://www.nxp.com/docs/en/data-sheet/LPC111X.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+49
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP4.7x4.7mm_ThermalVias
+QFN, 32 Pin (https://www.nxp.com/docs/en/data-sheet/LPC111X.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+66
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP4.65x4.65mm
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8209-8-bit%20AVR%20ATmega16M1-32M1-64M1_Datasheet.pdf#page=426), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+49
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP4.65x4.65mm_ThermalVias
+QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8209-8-bit%20AVR%20ATmega16M1-32M1-64M1_Datasheet.pdf#page=426), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+66
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP5.4x5.4mm
+QFN, 32 Pin (http://www.thatcorp.com/datashts/THAT_5171_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+49
+33
+Package_DFN_QFN
+QFN-32-1EP_7x7mm_P0.65mm_EP5.4x5.4mm_ThermalVias
+QFN, 32 Pin (http://www.thatcorp.com/datashts/THAT_5171_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+66
+33
+Package_DFN_QFN
+QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.1mm
+QFN, 36 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+46
+37
+Package_DFN_QFN
+QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.1mm_ThermalVias
+QFN, 36 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+59
+37
+Package_DFN_QFN
+QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm
+QFN, 36 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UHE36)%20QFN%2005-08-1876%20Rev%20%C3%98.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+49
+37
+Package_DFN_QFN
+QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm_ThermalVias
+QFN, 36 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UHE36)%20QFN%2005-08-1876%20Rev%20%C3%98.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+62
+37
+Package_DFN_QFN
+QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm
+QFN, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+46
+37
+Package_DFN_QFN
+QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm_ThermalVias
+QFN, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+56
+37
+Package_DFN_QFN
+QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm
+QFN, 36 Pin (www.st.com/resource/en/datasheet/stm32f101t6.pdf#page=72), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+46
+37
+Package_DFN_QFN
+QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm_ThermalVias
+QFN, 36 Pin (www.st.com/resource/en/datasheet/stm32f101t6.pdf#page=72), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+56
+37
+Package_DFN_QFN
+QFN-38-1EP_4x6mm_P0.4mm_EP2.65x4.65mm
+QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1750.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+47
+39
+Package_DFN_QFN
+QFN-38-1EP_4x6mm_P0.4mm_EP2.65x4.65mm_ThermalVias
+QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1750.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+56
+39
+Package_DFN_QFN
+QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
+QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=297), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+50
+41
+Package_DFN_QFN
+QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm_ThermalVias
+QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=297), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+67
+41
+Package_DFN_QFN
+QFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm
+QFN, 40 Pin (http://www.issi.com/WW/pdf/31FL3736.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+50
+41
+Package_DFN_QFN
+QFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm_ThermalVias
+QFN, 40 Pin (http://www.issi.com/WW/pdf/31FL3736.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+67
+41
+Package_DFN_QFN
+QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
+QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=295), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+57
+41
+Package_DFN_QFN
+QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias
+QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=295), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+83
+41
+Package_DFN_QFN
+QFN-42-1EP_5x6mm_P0.4mm_EP3.7x4.7mm
+QFN, 42 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081875_0_UHE42.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+55
+43
+Package_DFN_QFN
+QFN-42-1EP_5x6mm_P0.4mm_EP3.7x4.7mm_ThermalVias
+QFN, 42 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081875_0_UHE42.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+76
+43
+Package_DFN_QFN
+QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm
+QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/2512S.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+61
+45
+Package_DFN_QFN
+QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm_ThermalVias
+QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/2512S.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+87
+45
+Package_DFN_QFN
+QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
+QFN, 44 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_44_05-08-1763.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+61
+45
+Package_DFN_QFN
+QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias
+QFN, 44 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_44_05-08-1763.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+87
+45
+Package_DFN_QFN
+QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm
+QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+70
+45
+Package_DFN_QFN
+QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm_ThermalVias
+QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+107
+45
+Package_DFN_QFN
+QFN-44-1EP_9x9mm_P0.65mm_EP7.5x7.5mm
+44-Lead Plastic Quad Flat, No Lead Package - 9x9 mm Body [QFN]; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf
+QFN 0.65
+0
+49
+45
+Package_DFN_QFN
+QFN-44-1EP_9x9mm_P0.65mm_EP7.5x7.5mm_ThermalVias
+44-Lead Plastic Quad Flat, No Lead Package - 9x9 mm Body [QFN] with thermal vias; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf
+QFN 0.65
+0
+55
+45
+Package_DFN_QFN
+QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm
+QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=47), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm_ThermalVias
+QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=47), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
+QFN, 48 Pin (https://static.dev.sifive.com/SiFive-FE310-G000-datasheet-v1p5.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm_ThermalVias
+QFN, 48 Pin (https://static.dev.sifive.com/SiFive-FE310-G000-datasheet-v1p5.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm
+QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm_ThermalVias
+QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm
+QFN, 48 Pin (http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf#page=67), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm_ThermalVias
+QFN, 48 Pin (http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf#page=67), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm
+QFN, 48 Pin (https://www.onsemi.com/pub/Collateral/485BA.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm_ThermalVias
+QFN, 48 Pin (https://www.onsemi.com/pub/Collateral/485BA.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm
+QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=69), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+58
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=69), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm
+QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm_ThermalVias
+QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm
+QFN, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2041_datasheet.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm_ThermalVias
+QFN, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2041_datasheet.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm
+QFN, 48 Pin (http://www.st.com/resource/en/datasheet/stm32f042k6.pdf#page=94), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead ST_UFQFPN48 Analog_CP-48-13 JEDEC_MO-220-WKKD-4
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm_ThermalVias
+QFN, 48 Pin (http://www.st.com/resource/en/datasheet/stm32f042k6.pdf#page=94), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead ST_UFQFPN48 Analog_CP-48-13 JEDEC_MO-220-WKKD-4
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.7x5.7mm
+QFN, 48 Pin (https://www.renesas.com/us/en/document/dst/upd720201upd720202-datasheet), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.7x5.7mm_ThermalVias
+QFN, 48 Pin (https://www.renesas.com/us/en/document/dst/upd720201upd720202-datasheet), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
+QFN, 48 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_48_05-08-1704.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias
+QFN, 48 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_48_05-08-1704.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm
+QFN, 48 Pin (http://www.thatcorp.com/datashts/THAT_626x_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+65
+49
+Package_DFN_QFN
+QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm_ThermalVias
+QFN, 48 Pin (http://www.thatcorp.com/datashts/THAT_626x_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+49
+Package_DFN_QFN
+QFN-48-1EP_8x8mm_P0.5mm_EP6.2x6.2mm
+QFN, 48 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+49
+Package_DFN_QFN
+QFN-48-1EP_8x8mm_P0.5mm_EP6.2x6.2mm_ThermalVias
+QFN, 48 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+111
+49
+Package_DFN_QFN
+QFN-52-1EP_7x8mm_P0.5mm_EP5.41x6.45mm
+QFN, 52 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_52_05-08-1729.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+53
+Package_DFN_QFN
+QFN-52-1EP_7x8mm_P0.5mm_EP5.41x6.45mm_ThermalVias
+QFN, 52 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_52_05-08-1729.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+104
+53
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm
+QFN, 56 Pin (https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=634), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+61
+57
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias
+QFN, 56 Pin (https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=634), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+66
+57
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm
+QFN, 56 Pin (https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf#page=41), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+66
+57
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm_ThermalVias
+QFN, 56 Pin (https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf#page=41), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+76
+57
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm
+QFN, 56 Pin (http://www.cypress.com/file/416486/download#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalVias
+QFN, 56 Pin (http://www.cypress.com/file/416486/download#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP4.3x4.3mm
+QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002142A.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP4.3x4.3mm_ThermalVias
+QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002142A.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm
+QFN, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm_ThermalVias
+QFN, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm_ThermalVias_TopTented
+QFN, 56 Pin top tented version (manually modified). For information see: http://www.cypress.com/file/138911/download
+QFN DFN_QFN
+0
+115
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm
+QFN, 56 Pin (http://www.ti.com/lit/ds/symlink/tlc5957.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm_ThermalVias
+QFN, 56 Pin (http://www.ti.com/lit/ds/symlink/tlc5957.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP5.9x5.9mm
+QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001734B.pdf#page=50), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP5.9x5.9mm_ThermalVias
+QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001734B.pdf#page=50), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP6.1x6.1mm
+QFN, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+73
+57
+Package_DFN_QFN
+QFN-56-1EP_8x8mm_P0.5mm_EP6.1x6.1mm_ThermalVias
+QFN, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+99
+57
+Package_DFN_QFN
+QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm
+QFN, 60 Pin (https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+70
+61
+Package_DFN_QFN
+QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm_ThermalVias
+QFN, 60 Pin (https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+75
+61
+Package_DFN_QFN
+QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_8x8_with%206_5x6_5%20EP_JXX_C04-0437A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+90
+65
+Package_DFN_QFN
+QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_8x8_with%206_5x6_5%20EP_JXX_C04-0437A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+127
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP3.4x3.4mm
+QFN, 64 Pin (www.intel.com/content/www/us/en/ethernet-controllers/i210-ethernet-controller-datasheet.html), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP3.4x3.4mm_ThermalVias
+QFN, 64 Pin (www.intel.com/content/www/us/en/ethernet-controllers/i210-ethernet-controller-datasheet.html), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+84
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP3.8x3.8mm
+QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP3.8x3.8mm_ThermalVias
+QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+84
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.1x4.1mm
+QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.1x4.1mm_ThermalVias
+QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+84
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.7x4.7mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/60001477A.pdf (page 1083)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.7x4.7mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/60001477A.pdf (page 1083)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm
+QFN, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm_ThermalVias
+QFN, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+91
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.2x5.2mm
+QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/Si5345-44-42-D-DataSheet.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+81
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.2x5.2mm_ThermalVias
+QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/Si5345-44-42-D-DataSheet.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+107
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/70593d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+81
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/70593d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+107
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.7x5.7mm
+QFN, 64 Pin (https://static.klayers.net/kl_pdf/MS2130-MacroSilicon_KL-014-0010911.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+74
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.7x5.7mm_ThermalVias
+QFN, 64 Pin (https://static.klayers.net/kl_pdf/MS2130-MacroSilicon_KL-014-0010911.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+84
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.45x5.45mm
+QFN, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+81
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP5.45x5.45mm_ThermalVias
+QFN, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+107
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
+QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/tusb8041.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+81
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm_ThermalVias
+QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/tusb8041.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+107
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002304A.pdf (page 43)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+90
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002304A.pdf (page 43)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+127
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.5x7.5mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc7593.pdf (page 432)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+101
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.5x7.5mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc7593.pdf (page 432)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+151
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm
+QFN, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+90
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm_ThermalVias
+QFN, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+127
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.25x7.25mm
+64-Lead Plastic Quad Flat No-Lead Package, 9x9mm Body (see Atmel Appnote 8826)
+QFN 0.5
+0
+90
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.35x7.35mm
+64-Lead Plastic Quad Flat, No Lead Package (MR) - 9x9x0.9 mm Body [QFN]; (see Microchip Packaging Specification 00000049BS.pdf)
+QFN 0.5
+0
+90
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf (page 415)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+101
+65
+Package_DFN_QFN
+QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm_ThermalVias
+QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf (page 415)), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+151
+65
+Package_DFN_QFN
+QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm
+QFN, 68 Pin (https://cdn.microsemi.com/documents/1bf6886f-5919-4508-a50b-b1dbf3fdf0f4/download/#page=98), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+85
+69
+Package_DFN_QFN
+QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm_ThermalVias
+QFN, 68 Pin (https://cdn.microsemi.com/documents/1bf6886f-5919-4508-a50b-b1dbf3fdf0f4/download/#page=98), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+111
+69
+Package_DFN_QFN
+QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm
+QFN, 68 Pin (https://www.st.com/resource/en/datasheet/stm32h725ze.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+85
+69
+Package_DFN_QFN
+QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm_ThermalVias
+QFN, 68 Pin (https://www.st.com/resource/en/datasheet/stm32h725ze.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+111
+69
+Package_DFN_QFN
+QFN-72-1EP_10x10mm_P0.5mm_EP6x6mm
+QFN, 72 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001682C.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+82
+73
+Package_DFN_QFN
+QFN-72-1EP_10x10mm_P0.5mm_EP6x6mm_ThermalVias
+QFN, 72 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001682C.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+135
+73
+Package_DFN_QFN
+QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm
+QFN, 76 Pin (https://www.marvell.com/documents/bqcwxsoiqfjkcjdjhkvc/#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+86
+77
+Package_DFN_QFN
+QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm_ThermalVias
+QFN, 76 Pin (https://www.marvell.com/documents/bqcwxsoiqfjkcjdjhkvc/#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+96
+77
+Package_DFN_QFN
+QFN-76-1EP_9x9mm_P0.4mm_EP5.81x6.31mm
+QFN, 76 Pin (https://ftdichip.com/wp-content/uploads/2020/07/DS_FT600Q-FT601Q-IC-Datasheet.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+86
+77
+Package_DFN_QFN
+QFN-76-1EP_9x9mm_P0.4mm_EP5.81x6.31mm_ThermalVias
+QFN, 76 Pin (https://ftdichip.com/wp-content/uploads/2020/07/DS_FT600Q-FT601Q-IC-Datasheet.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+96
+77
+Package_DFN_QFN
+QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm
+QFN, 80 Pin (https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+90
+81
+Package_DFN_QFN
+QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm_ThermalVias
+QFN, 80 Pin (https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+QFN NoLead
+0
+116
+81
+Package_DFN_QFN
+Qorvo_DFN-8-1EP_2x2mm_P0.5mm
+DFN 8 2x2mm, 0.5mm http://www.qorvo.com/products/d/da000896
+DFN 0.5 Qorvo 2x2mm
+0
+9
+9
+Package_DFN_QFN
+Qorvo_TQFN66-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
+Qorvo  TQFN66, 48 Pin (https://www.qorvo.com/products/d/da006847), generated with kicad-footprint-generator ipc_noLead_generator.py
+Qorvo TQFN66 NoLead
+0
+58
+49
+Package_DFN_QFN
+Qorvo_TQFN66-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm_ThermalVias
+Qorvo  TQFN66, 48 Pin (https://www.qorvo.com/products/d/da006847), generated with kicad-footprint-generator ipc_noLead_generator.py
+Qorvo TQFN66 NoLead
+0
+75
+49
+Package_DFN_QFN
+ROHM_DFN0604-3
+DFN package size 0604 3 pins
+DFN package size 0604 3 pins
+0
+3
+3
+Package_DFN_QFN
+Renesas_UQFN-16_2x2mm_P0.4mm
+Renesas  UQFN, 16 Pin (Renesas STQFN-16L, https://www.renesas.com/en/document/dst/slg47011-datasheet#page=228), generated with kicad-footprint-generator ipc_noLead_generator.py
+Renesas UQFN NoLead
+0
+16
+16
+Package_DFN_QFN
+Renesas_UQFN-20_2x3mm_P0.4mm_LayoutBorder4x6y
+Renesas  UQFN, 20 Pin (Renesas STQFN-20L, https://www.renesas.com/en/document/dst/slg465808283-datasheet#page=200), generated with kicad-footprint-generator ipc_noLead_generator.py
+Renesas UQFN NoLead
+0
+20
+20
+Package_DFN_QFN
+ST_UFDFPN-12-1EP_3x3mm_P0.5mm_EP1.4x2.55mm
+ST  UFDFPN, 12 Pin (https://www.st.com/resource/en/datasheet/st25dv04k.pdf#page=152), generated with kicad-footprint-generator ipc_noLead_generator.py
+ST UFDFPN NoLead
+0
+14
+13
+Package_DFN_QFN
+ST_UFQFPN-20_3x3mm_P0.5mm
+UFQFPN 20-lead, 3 x 3 mm, 0.5 mm pitch, ultra thin fine pitch quad flat package (http://www.st.com/resource/en/datasheet/stm8s003f3.pdf)
+UFQFPN 0.5
+0
+20
+20
+Package_DFN_QFN
+ST_UQFN-6L_1.5x1.7mm_P0.5mm
+ST  UQFN, 6 Pin (https://www.st.com/resource/en/datasheet/ecmf02-2amx6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+ST UQFN NoLead
+0
+6
+6
+Package_DFN_QFN
+SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm
+20-Lead Plastic Quad Flat, No Lead Package - 3x3 mm Body [QFN] with corner pads; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf
+QFN 0.5
+0
+25
+21
+Package_DFN_QFN
+SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm_ThermalVias
+20-Lead Plastic Quad Flat, No Lead Package - 3x3 mm Body [QFN] with corner pads and thermal vias; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf
+QFN 0.5
+0
+31
+21
+Package_DFN_QFN
+TDFN-6-1EP_2.5x2.5mm_P0.65mm_EP1.3x2mm
+TDFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+11
+7
+Package_DFN_QFN
+TDFN-6-1EP_2.5x2.5mm_P0.65mm_EP1.3x2mm_ThermalVias
+TDFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+18
+7
+Package_DFN_QFN
+TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm
+TDFN, 8 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0168.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+TDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm
+TDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/MCP6V66-Family-Data-Sheet-DS20006266A.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+TDFN-8-1EP_3x2mm_P0.5mm_EP1.4x1.4mm
+TDFN, 8 Pin (http://ww1.microchip.com/downloads/en/devicedoc/20005514a.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mm
+8-lead plastic dual flat, 2x3x0.75mm size, 0.5mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MN_C04-0129E-MN.pdf)
+TDFN DFN 0.5mm
+0
+12
+9
+Package_DFN_QFN
+TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mm_ThermalVias
+8-lead plastic dual flat, 2x3x0.75mm size, 0.5mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MN_C04-0129E-MN.pdf)
+TDFN DFN 0.5mm
+0
+17
+9
+Package_DFN_QFN
+TDFN-8_1.4x1.6mm_P0.4mm
+TDFN, 8 Pin (https://www.silabs.com/documents/public/data-sheets/si7210-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+8
+8
+Package_DFN_QFN
+TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm
+TDFN, 10 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0429.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+13
+11
+Package_DFN_QFN
+TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm_ThermalVias
+TDFN, 10 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0429.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+16
+11
+Package_DFN_QFN
+TDFN-12-1EP_3x3mm_P0.4mm_EP1.7x2.45mm
+TDFN, 12 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tdfn-12pin-l123x3c), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+25
+13
+Package_DFN_QFN
+TDFN-12-1EP_3x3mm_P0.4mm_EP1.7x2.45mm_ThermalVias
+TDFN, 12 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tdfn-12pin-l123x3c), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+32
+13
+Package_DFN_QFN
+TDFN-12_2x3mm_P0.5mm
+TDFN, 12 Pads, No exposed, http://www.st.com/resource/en/datasheet/stm6600.pdf
+DFN
+0
+12
+12
+Package_DFN_QFN
+TDFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm
+TDFN, 14 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0137.PDF (T1433-2C)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+19
+15
+Package_DFN_QFN
+TDFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm_ThermalVias
+TDFN, 14 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0137.PDF (T1433-2C)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TDFN NoLead
+0
+26
+15
+Package_DFN_QFN
+TQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm
+TQFN, 16 Pin (https://www.diodes.com/assets/Datasheets/PI6C5946002.pdf#page=12), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead Pericom-TQFN-16-ZH Analog-CP-16-22
+0
+21
+17
+Package_DFN_QFN
+TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm_ThermalVias
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+TQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+TQFN, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf (T1644+4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+TQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias
+TQFN, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf (T1644+4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+TQFN-16-1EP_5x5mm_P0.8mm_EP2.29x2.29mm
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+TQFN-16-1EP_5x5mm_P0.8mm_EP2.29x2.29mm_ThermalVias
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+TQFN-16-1EP_5x5mm_P0.8mm_EP3.1x3.1mm
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-2)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+TQFN-16-1EP_5x5mm_P0.8mm_EP3.1x3.1mm_ThermalVias
+TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-2)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-2)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-2)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+30
+21
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-5C)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-5C)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.9x2.9mm
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100172.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+TQFN-20-1EP_4x4mm_P0.5mm_EP2.9x2.9mm_ThermalVias
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100172.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm_ThermalVias
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+TQFN-20-1EP_5x5mm_P0.65mm_EP3.25x3.25mm
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-5)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+TQFN-20-1EP_5x5mm_P0.65mm_EP3.25x3.25mm_ThermalVias
+TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-5)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
+TQFN, 24 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+TQFN, 24 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+TQFN, 24 Pin (http://pdfserv.maxim-ic.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+TQFN, 24 Pin (http://pdfserv.maxim-ic.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_PullBack
+TQFN, 24 Pin (https://ams.com/documents/20143/36005/AS1115_DS000206_1-00.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+TQFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_PullBack_ThermalVias
+TQFN, 24 Pin (https://ams.com/documents/20143/36005/AS1115_DS000206_1-00.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+TQFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm
+TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+TQFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-4)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+38
+29
+Package_DFN_QFN
+TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm
+TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias
+TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+43
+29
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-6)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-6)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+42
+33
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-3)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP3.4x3.4mm
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-9)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+TQFN-32-1EP_5x5mm_P0.5mm_EP3.4x3.4mm_ThermalVias
+TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-9)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+TQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm
+TQFN, 40 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T4055-1)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+45
+41
+Package_DFN_QFN
+TQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm_ThermalVias
+TQFN, 40 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T4055-1)), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead
+0
+55
+41
+Package_DFN_QFN
+TQFN-44-1EP_7x7mm_P0.5mm_EP4.7x4.7mm
+TQFN, 44 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0144.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead T4477+2 T4477+2C T4477+3
+0
+54
+45
+Package_DFN_QFN
+TQFN-44-1EP_7x7mm_P0.5mm_EP4.7x4.7mm_ThermalVias
+TQFN, 44 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0144.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead T4477+2 T4477+2C T4477+3
+0
+71
+45
+Package_DFN_QFN
+TQFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm
+TQFN, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0144.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead T4877+3 T4877+3C
+0
+58
+49
+Package_DFN_QFN
+TQFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm_ThermalVias
+TQFN, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0144.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+TQFN NoLead T4877+3 T4877+3C
+0
+75
+49
+Package_DFN_QFN
+Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm
+Texas instruments QFN Package, datasheet: https://www.ti.com/lit/ds/symlink/tpsm53602.pdf
+Texas instruments QFN
+0
+15
+15
+Package_DFN_QFN
+Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm_ThermalVia
+Texas instruments QFN Package, datasheet: https://www.ti.com/lit/ds/symlink/tpsm53602.pdf
+Texas instruments QFN
+0
+34
+15
+Package_DFN_QFN
+Texas_DLH0010A_WSON-10-1EP_2.2x2mm_P0.4mm_EP0.9x1.5mm
+Texas DLH0010A WSON, 10 Pin (https://www.ti.com/lit/gpn/BQ25185), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WSON NoLead
+0
+12
+11
+Package_DFN_QFN
+Texas_DLH0010A_WSON-10-1EP_2.2x2mm_P0.4mm_EP0.9x1.5mm_ThermalVias
+Texas DLH0010A WSON, 10 Pin (https://www.ti.com/lit/gpn/BQ25185), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WSON NoLead
+0
+15
+11
+Package_DFN_QFN
+Texas_DRB0008A
+DFN-8, 3x3x1mm, http://www.ti.com/lit/ds/symlink/ucc24610.pdf
+DRB0008A
+0
+23
+9
+Package_DFN_QFN
+Texas_MOF0009A
+Texas Instruments, QFM MOF0009A, 6x8x2mm (http://www.ti.com/lit/ml/mpsi063a/mpsi063a.pdf)
+ti qfm mof0009a
+0
+24
+9
+Package_DFN_QFN
+Texas_PicoStar_DFN-3_0.69x0.60mm
+Texas Picostar DFN-3, 0.73x0.64mm max, 0.69x0.60mm nom, https://www.ti.com/lit/ds/symlink/csd13380f3.pdf
+TI YJM0003A
+0
+5
+3
+Package_DFN_QFN
+Texas_QFN-41_10x16mm
+QFN, 41 Pin (http://www.ti.com/lit/ml/mpqf506/mpqf506.pdf)
+QFN DFN_QFN
+0
+65
+41
+Package_DFN_QFN
+Texas_R-PUQFN-N10
+http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=MPQF186&fileType=pdf
+Texas_R-PUQFN-N10
+0
+10
+10
+Package_DFN_QFN
+Texas_R-PUQFN-N12
+Texas_R-PUQFN-N12 http://www.ti.com/lit/ds/symlink/txb0104.pdf
+Texas_R-PUQFN-N12
+0
+13
+12
+Package_DFN_QFN
+Texas_REF0038A_WQFN-38-2EP_6x4mm_P0.4
+Texas REF0038A WQFN, 38 Pin, 2EP (https://www.ti.com/lit/ds/symlink/tps25730.pdf#page=68)
+Texas Instruments WQFN NoLead
+0
+50
+34
+Package_DFN_QFN
+Texas_RGC0064B_VQFN-64-1EP_9x9mm_P0.5mm_EP4.25x4.25mm
+Texas RGC0064B VQFN, 64 Pin (http://www.ti.com/lit/ds/symlink/msp430f5217.pdf#page=122), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+69
+65
+Package_DFN_QFN
+Texas_RGC0064B_VQFN-64-1EP_9x9mm_P0.5mm_EP4.25x4.25mm_ThermalVias
+Texas RGC0064B VQFN, 64 Pin (http://www.ti.com/lit/ds/symlink/msp430f5217.pdf#page=122), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+95
+65
+Package_DFN_QFN
+Texas_RGE0024C_VQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
+Texas RGE0024C VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/pca9548a.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+Texas_RGE0024C_VQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+Texas RGE0024C VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/pca9548a.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+Texas_RGE0024H_VQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+Texas RGE0024H VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+Texas_RGE0024H_VQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+Texas RGE0024H VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+Texas_RGP0020D_VQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+Texas RGP0020D VQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+Texas_RGP0020D_VQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+Texas RGP0020D VQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+Texas_RGP0020H_VQFN-20-1EP_4x4mm_P0.5mm_EP2.4x2.4mm
+Texas RGP0020H VQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/cc1101.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+Texas_RGP0020H_VQFN-20-1EP_4x4mm_P0.5mm_EP2.4x2.4mm_ThermalVias
+Texas RGP0020H VQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/cc1101.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+Texas RGV0016A VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ina3221.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias
+Texas RGV0016A VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ina3221.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm
+Texas RGW0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps7a47.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm_ThermalVias
+Texas RGW0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps7a47.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N16_EP2.05x2.55mm
+QFN, 16 Pin (https://www.ti.com/lit/ds/symlink/ts5v330.pdf#page=28)
+QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N16_EP2.05x2.55mm_ThermalVias
+QFN, 16 Pin (https://www.ti.com/lit/ds/symlink/ts5v330.pdf#page=28)
+QFN NoLead
+0
+27
+18
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm
+QFN, 20 Pin, RGY0020A (https://www.ti.com/lit/ds/symlink/txb0108.pdf#page=33)
+QFN NoLead
+0
+25
+21
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm_ThermalVias
+QFN, 20 Pin, RGY0020A (https://www.ti.com/lit/ds/symlink/txb0108.pdf#page=33)
+QFN NoLead
+0
+29
+21
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N24_EP2.05x3.1mm
+QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq24133.pdf#page=40)
+QFN NoLead
+0
+29
+25
+Package_DFN_QFN
+Texas_RGY_R-PVQFN-N24_EP2.05x3.1mm_ThermalVias
+QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq24133.pdf#page=40)
+QFN NoLead
+0
+36
+25
+Package_DFN_QFN
+Texas_RGZ0048A_VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
+Texas RGZ0048A VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/msp430f5232.pdf#page=113), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+65
+49
+Package_DFN_QFN
+Texas_RGZ0048A_VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias
+Texas RGZ0048A VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/msp430f5232.pdf#page=113), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+91
+49
+Package_DFN_QFN
+Texas_RHA0040B_VQFN-40-1EP_6x6mm_P0.5mm_EP4.15x4.15mm
+Texas RHA0040B VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430g2755.pdf#page=72 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+50
+41
+Package_DFN_QFN
+Texas_RHA0040B_VQFN-40-1EP_6x6mm_P0.5mm_EP4.15x4.15mm_ThermalVias
+Texas RHA0040B VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430g2755.pdf#page=72 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+67
+41
+Package_DFN_QFN
+Texas_RHA0040D_VQFN-40-1EP_6x6mm_P0.5mm_EP2.9x2.9mm
+Texas RHA0040D VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5731.pdf#page=111 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+45
+41
+Package_DFN_QFN
+Texas_RHA0040D_VQFN-40-1EP_6x6mm_P0.5mm_EP2.9x2.9mm_ThermalVias
+Texas RHA0040D VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5731.pdf#page=111 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+55
+41
+Package_DFN_QFN
+Texas_RHA0040E_VQFN-40-1EP_6x6mm_P0.5mm_EP3.52x2.62mm
+Texas RHA0040E VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=57 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+47
+41
+Package_DFN_QFN
+Texas_RHA0040E_VQFN-40-1EP_6x6mm_P0.5mm_EP3.52x2.62mm_ThermalVias
+Texas RHA0040E VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=57 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+60
+41
+Package_DFN_QFN
+Texas_RHA_VQFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
+Texas RHA VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/dac7750.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+50
+41
+Package_DFN_QFN
+Texas_RHA_VQFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias
+Texas RHA VQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/dac7750.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+67
+41
+Package_DFN_QFN
+Texas_RHB0032E_VQFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm
+Texas RHB0032E VQFN, 32 Pin (http://www.ti.com/lit/ds/symlink/msp430f1122.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+42
+33
+Package_DFN_QFN
+Texas_RHB0032E_VQFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias
+Texas RHB0032E VQFN, 32 Pin (http://www.ti.com/lit/ds/symlink/msp430f1122.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+52
+33
+Package_DFN_QFN
+Texas_RHB0032M_VQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm
+Texas RHB0032M VQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/dp83td510e.pdf#page=91), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+Texas_RHB0032M_VQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm_ThermalVias
+Texas RHB0032M VQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/dp83td510e.pdf#page=91), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+Texas_RHF0024A_VQFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
+Texas RHF0024A VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tps2660.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+31
+25
+Package_DFN_QFN
+Texas_RHF0024A_VQFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias
+Texas RHF0024A VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tps2660.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+44
+25
+Package_DFN_QFN
+Texas_RHH0036C_VQFN-36-1EP_6x6mm_P0.5mm_EP4.4x4.4mm
+Texas RHH0036C VQFN, 36 Pin (http://www.ti.com/lit/ds/slvsba5d/slvsba5d.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+46
+37
+Package_DFN_QFN
+Texas_RHH0036C_VQFN-36-1EP_6x6mm_P0.5mm_EP4.4x4.4mm_ThermalVias
+Texas RHH0036C VQFN, 36 Pin (http://www.ti.com/lit/ds/slvsba5d/slvsba5d.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+63
+37
+Package_DFN_QFN
+Texas_RJE0020A_VQFN-20-1EP_3x3mm_P0.45mm_EP0.675x0.76mm
+Texas RJE0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps51396a.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+22
+21
+Package_DFN_QFN
+Texas_RJE0020A_VQFN-20-1EP_3x3mm_P0.45mm_EP0.675x0.76mm_ThermalVias
+Texas RJE0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps51396a.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+24
+21
+Package_DFN_QFN
+Texas_RMG0012A_WQFN-12_1.8x1.8mm_P0.4mm
+Texas RMG0012A WQFN, 12 Pin (https://www.ti.com/lit/ds/symlink/tmux131.pdf#page=18), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+12
+12
+Package_DFN_QFN
+Texas_RMQ0024A_WQFN-24-1EP_3x3mm_P0.4mm_EP1.9x1.9mm
+Texas RMQ0024A WQFN, 24 Pin (https://www.ti.com/jp/lit/ml/mpqf398a/mpqf398a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+26
+25
+Package_DFN_QFN
+Texas_RMQ0024A_WQFN-24-1EP_3x3mm_P0.4mm_EP1.9x1.9mm_ThermalVias
+Texas RMQ0024A WQFN, 24 Pin (https://www.ti.com/jp/lit/ml/mpqf398a/mpqf398a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+31
+25
+Package_DFN_QFN
+Texas_RNH0030A_WQFN-30-1EP_2.5x4.5mm_P0.4mm_EP1.2x3.2mm
+Texas RNH0030A WQFN, 30 Pin (https://www.ti.com/lit/ds/symlink/hd3ss3220.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+33
+31
+Package_DFN_QFN
+Texas_RNH0030A_WQFN-30-1EP_2.5x4.5mm_P0.4mm_EP1.2x3.2mm_ThermalVias
+Texas RNH0030A WQFN, 30 Pin (https://www.ti.com/lit/ds/symlink/hd3ss3220.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+40
+31
+Package_DFN_QFN
+Texas_RNN0018A
+Texas Instruments, VQFN-HR RNN0018A (http://www.ti.com/lit/ds/symlink/tps568215.pdf)
+ti vqfn-hr rnn0018a
+0
+26
+18
+Package_DFN_QFN
+Texas_RNP0030B_WQFN-30-1EP_4x6mm_P0.5mm_EP1.8x4.5mm
+Texas RNP0030B WQFN, 30 Pin (https://www.ti.com/lit/ds/symlink/lm76003-q1.pdf#page=53), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead Texas_RNP0030E
+0
+39
+31
+Package_DFN_QFN
+Texas_RNP0030B_WQFN-30-1EP_4x6mm_P0.5mm_EP1.8x4.5mm_ThermalVias
+Texas RNP0030B WQFN, 30 Pin (https://www.ti.com/lit/ds/symlink/lm76003-q1.pdf#page=53), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead Texas_RNP0030E
+0
+55
+31
+Package_DFN_QFN
+Texas_RNQ0040A_WQFN-40-1EP_6x4mm_P0.4mm_EP4.7x2.7mm
+Texas RNQ0040A WQFN, 40 Pin (https://www.ti.com/lit/ds/symlink/tusb1046-dci.pdf#page=45), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+47
+41
+Package_DFN_QFN
+Texas_RNQ0040A_WQFN-40-1EP_6x4mm_P0.4mm_EP4.7x2.7mm_ThermalVias
+Texas RNQ0040A WQFN, 40 Pin (https://www.ti.com/lit/ds/symlink/tusb1046-dci.pdf#page=45), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+60
+41
+Package_DFN_QFN
+Texas_RPU0010A_VQFN-HR-10_2x2mm_P0.5mm
+VQFN-HR, 10 Pin (https://www.ti.com/lit/ds/symlink/tps62912.pdf#page=39)
+VQFN-HR NO LEAD
+0
+10
+10
+Package_DFN_QFN
+Texas_RSA_VQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm
+Texas RSA VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/msp430g2001.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+Texas_RSA_VQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalVias
+Texas RSA VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/msp430g2001.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+36
+17
+Package_DFN_QFN
+Texas_RSN_WQFN-32-1EP_4x4mm_P0.4mm_EP2.8x2.8mm
+Texas RSN WQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/bq25703a.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+Texas_RSN_WQFN-32-1EP_4x4mm_P0.4mm_EP2.8x2.8mm_ThermalVias
+Texas RSN WQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/bq25703a.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+Texas_RSW0010A_UQFN-10_1.4x1.8mm_P0.4mm
+Texas RSW0010A UQFN, 10 Pin (https://www.ti.com/lit/ds/symlink/ts3a5223.pdf#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas UQFN NoLead
+0
+10
+10
+Package_DFN_QFN
+Texas_RTE0016D_WQFN-16-1EP_3x3mm_P0.5mm_EP0.8x0.8mm
+Texas RTE0016D WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/dac80504.pdf#page=47), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RTE0016D_WQFN-16-1EP_3x3mm_P0.5mm_EP0.8x0.8mm_ThermalVias
+Texas RTE0016D WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/dac80504.pdf#page=47), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+20
+17
+Package_DFN_QFN
+Texas_RTE_WQFN-16-1EP_3x3mm_P0.5mm_EP1.2x0.8mm
+Texas RTE WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tps43060.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RTE_WQFN-16-1EP_3x3mm_P0.5mm_EP1.2x0.8mm_ThermalVias
+Texas RTE WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tps43060.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+23
+17
+Package_DFN_QFN
+Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
+Texas RTW WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias
+Texas RTW WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm
+Texas RTY WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/drv8801.pdf#page=36 MO-220 variation VGGC), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias
+Texas RTY WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/drv8801.pdf#page=36 MO-220 variation VGGC), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+Texas_RUK0020B_WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm
+Texas RUK0020B WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+Texas_RUK0020B_WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias
+Texas RUK0020B WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+Texas_RUM0016A_WQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm
+Texas RUM0016A WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/lmh0074.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RUM0016A_WQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm_ThermalVias
+Texas RUM0016A WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/lmh0074.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+Texas_RUN0010A_WQFN-10_2x2mm_P0.5mm
+Texas RUN0010A WQFN, 10 Pin (https://www.ti.com/lit/ds/symlink/tmp461.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WQFN NoLead
+0
+10
+10
+Package_DFN_QFN
+Texas_RVA_VQFN-16-1EP_3.5x3.5mm_P0.5mm_EP2.14x2.14mm
+Texas RVA VQFN, 16 Pin (https://www.ti.com/lit/pdf/MPQF232), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+Texas_RVA_VQFN-16-1EP_3.5x3.5mm_P0.5mm_EP2.14x2.14mm_ThermalVias
+Texas RVA VQFN, 16 Pin (https://www.ti.com/lit/pdf/MPQF232), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+Texas_RVE0028A_VQFN-28-1EP_3.5x4.5mm_P0.4mm_EP2.1x3.1mm
+Texas RVE0028A VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/tps51363.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+Texas_RVE0028A_VQFN-28-1EP_3.5x4.5mm_P0.4mm_EP2.1x3.1mm_ThermalVias
+Texas RVE0028A VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/tps51363.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VQFN NoLead
+0
+43
+29
+Package_DFN_QFN
+Texas_RWH0032A
+Texas Instruments, RWH0032A, 8x8x0.9mm (http://www.ti.com/lit/ds/snosd10c/snosd10c.pdf)
+ti rwh0032a
+0
+71
+33
+Package_DFN_QFN
+Texas_RWH0032A_ThermalVias
+Texas Instruments, RWH0032A, 8x8x0.9mm (http://www.ti.com/lit/ds/snosd10c/snosd10c.pdf)
+ti rwh0032a
+0
+94
+33
+Package_DFN_QFN
+Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm
+Texas  RWU0007A VQFN, 2x2mm, 7 Pin (https://www.ti.com/lit/ds/symlink/tps61022.pdf)
+Texas VQFN NoLead
+0
+13
+7
+Package_DFN_QFN
+Texas_S-PDSO-N10_EP1.2x2mm
+DFN, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+15
+11
+Package_DFN_QFN
+Texas_S-PDSO-N10_EP1.2x2mm_ThermalVias
+DFN, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py
+DFN NoLead
+0
+22
+11
+Package_DFN_QFN
+Texas_S-PVQFN-N14
+Texas_S-PVQFN-N14  http://www.ti.com/lit/ds/symlink/txb0104.pdf
+Texas_S-PVQFN-N14_4.3x4.3_Pitch0.5mm_ThermalPad
+0
+19
+15
+Package_DFN_QFN
+Texas_S-PVQFN-N14_ThermalVias
+Texas_S-PVQFN-N14_ThermalVias  http://www.ti.com/lit/ds/symlink/txb0104.pdf
+Texas_S-PVQFN-N14_ThermalVias
+0
+24
+15
+Package_DFN_QFN
+Texas_S-PWQFN-N20
+20-Pin Plastic Quad Flatpack No-Lead Package, Body 3.0x3.0x0.8mm, Texas Instruments (http://www.ti.com/lit/ds/symlink/tps22993.pdf)
+QFN 0.4
+0
+24
+20
+Package_DFN_QFN
+Texas_S-PWQFN-N100_EP5.5x5.5mm
+http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/lit/ds/sllse76m/sllse76m.pdf
+MultiRow QFN
+0
+114
+105
+Package_DFN_QFN
+Texas_S-PWQFN-N100_EP5.5x5.5mm_ThermalVias
+http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/lit/ds/sllse76m/sllse76m.pdf
+MultiRow QFN
+0
+131
+105
+Package_DFN_QFN
+Texas_S-PX2QFN-14
+Texas  QFN, 14 Pin (http://www.ti.com/lit/ds/symlink/tlv9004.pdf#page=64), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas QFN NoLead
+0
+14
+14
+Package_DFN_QFN
+Texas_UQFN-10_1.5x2mm_P0.5mm
+Texas RSE0010A UQFN, 10 Pin (https://www.ti.com/lit/ml/mpqf186d/mpqf186d.pdf)
+Texas RSE0010 UQFN NoLead
+0
+10
+10
+Package_DFN_QFN
+Texas_VQFN-HR-12_2x2.5mm_P0.5mm
+Texas  VQFN-HR, 12 Pin, http://www.ti.com/lit/ml/mpqf508/mpqf508.pdf
+RUX0012A Texas VQFN-HR NoLead
+0
+12
+12
+Package_DFN_QFN
+Texas_VQFN-HR-12_2x2.5mm_P0.5mm_ThermalVias
+Texas  VQFN-HR, 12 Pin, http://www.ti.com/lit/ml/mpqf508/mpqf508.pdf
+RUX0012A Texas VQFN-HR NoLead
+0
+16
+12
+Package_DFN_QFN
+Texas_VQFN-HR-20_3x2.5mm_P0.5mm_RQQ0011A
+Texas  VQFN-HR, 11 Pin, https://www.ti.com/lit/ml/mpqf579/mpqf579.pdf
+RQQ0011A
+0
+15
+11
+Package_DFN_QFN
+Texas_VQFN-RHL-20
+http://www.ti.com/lit/ds/symlink/bq51050b.pdf
+RHL0020A
+0
+33
+21
+Package_DFN_QFN
+Texas_VQFN-RHL-20_ThermalVias
+http://www.ti.com/lit/ds/symlink/bq51050b.pdf
+RHL0020A
+0
+41
+21
+Package_DFN_QFN
+Texas_VQFN-RNR0011A-11
+RNR0011A, VQFN-11 (https://www.ti.com/lit/ds/symlink/tps61089.pdf#Page=27)
+TI RNR0011A
+0
+20
+11
+Package_DFN_QFN
+Texas_WQFN-MR-100_3x3-DapStencil
+http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=mpqf258&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=LPPD235&fileType=pdf
+MultiRow QFN
+0
+113
+105
+Package_DFN_QFN
+Texas_WQFN-MR-100_ThermalVias_3x3-DapStencil
+http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=mpqf258&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=LPPD235&fileType=pdf
+MultiRow QFN
+0
+126
+105
+Package_DFN_QFN
+Texas_X2QFN-12_1.6x1.6mm_P0.4mm
+Texas  X2QFN, 12 Pin (http://www.ti.com/lit/ml/mpqf391c/mpqf391c.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas X2QFN NoLead
+0
+12
+12
+Package_DFN_QFN
+Texas_X2QFN-RUE-12_1.4x2mm_P0.4mm
+Texas  X2QFN-RUE, 12 Pin (https://www.ti.com/lit/ml/mpqf214b/mpqf214b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas X2QFN-RUE NoLead
+0
+12
+12
+Package_DFN_QFN
+UDC-QFN-20-4EP_3x4mm_P0.5mm_EP0.41x0.25mm
+UDC QFN, 20 Pin, Exposed Pad Variation AB (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081536_B_UDC20(AB).pdf), modifed from generated QFN-20-1EP_3x4mm_P0.5
+QFN NoLead
+0
+24
+24
+Package_DFN_QFN
+UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
+UDFN-4_1x1mm_P0.65mm, http://ww1.microchip.com/downloads/en/DeviceDoc/MIC550x-300mA-Single-Output-LDO-in-Small-Packages-DS20006006A.pdf
+UDFN-4_1x1mm_P0.65mm
+0
+5
+5
+Package_DFN_QFN
+UDFN-9_1.0x3.8mm_P0.5mm
+9-pin UDFN package, 1.0x3.8mm, (Ref: https://katalog.we-online.de/pbs/datasheet/824014881.pdf)
+UDFN SMD
+0
+9
+9
+Package_DFN_QFN
+UDFN-10_1.35x2.6mm_P0.5mm
+http://www.st.com/content/ccc/resource/technical/document/datasheet/f2/11/8a/ed/40/31/40/56/DM00088292.pdf/files/DM00088292.pdf/jcr:content/translations/en.DM00088292.pdf
+UDFN 0.5 uQFN
+0
+10
+10
+Package_DFN_QFN
+UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
+UFQFPN, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+UFQFPN NoLead
+0
+37
+33
+Package_DFN_QFN
+UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+UFQFPN, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+UFQFPN NoLead
+0
+47
+33
+Package_DFN_QFN
+UQFN-10_1.3x1.8mm_P0.4mm
+UQFN, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 9)), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+10
+10
+Package_DFN_QFN
+UQFN-10_1.4x1.8mm_P0.4mm
+UQFN, 10 Pin (https://www.onsemi.com/pub/Collateral/488AT.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead ONSemi-UQFN10-488AT-01
+0
+10
+10
+Package_DFN_QFN
+UQFN-10_1.6x2.1mm_P0.5mm
+UQFN, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 12)), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+10
+10
+Package_DFN_QFN
+UQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm
+16-Lead Ultra Thin Quad Flat, No Lead Package (UC) - 3x3x0.5 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf)
+QFN 0.5
+0
+21
+17
+Package_DFN_QFN
+UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm
+UQFN, 16 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/16L_UQFN_4x4x0_5mm_JQ_C04257A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm_ThermalVias
+UQFN, 16 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/16L_UQFN_4x4x0_5mm_JQ_C04257A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+UQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm
+16-Lead Ultra Thin Plastic Quad Flat, No Lead Package (JQ) - 4x4x0.5 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf)
+QFN 0.65
+0
+21
+17
+Package_DFN_QFN
+UQFN-16_1.8x2.6mm_P0.4mm
+UQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/ts3a5017.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead TI-RSV0016A
+0
+16
+16
+Package_DFN_QFN
+UQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm
+UQFN, 20 Pin (https://www.kinet-ic.com/uploads/web/KTD2058,%20KTD2059,%20KTD2060,%20KTD2061/KTD2061-58-59-60-04e.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+UQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias
+UQFN, 20 Pin (https://www.kinet-ic.com/uploads/web/KTD2058,%20KTD2059,%20KTD2060,%20KTD2061/KTD2061-58-59-60-04e.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+30
+21
+Package_DFN_QFN
+UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm
+UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm_ThermalVias
+UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+30
+21
+Package_DFN_QFN
+UQFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm
+UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001839B.pdf#page=464), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+UQFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_ThermalVias
+UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001839B.pdf#page=464), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+35
+21
+Package_DFN_QFN
+UQFN-20_3x3mm_P0.4mm
+UQFN, 20 Pin (https://resurgentsemi.com/wp-content/uploads/2018/09/MPR121_rev5-Resurgent.pdf?d453f8&d453f8), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+20
+20
+Package_DFN_QFN
+UQFN-28-1EP_4x4mm_P0.4mm_EP2.35x2.35mm
+UQFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=338), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+UQFN-28-1EP_4x4mm_P0.4mm_EP2.35x2.35mm_ThermalVias
+UQFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=338), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+43
+29
+Package_DFN_QFN
+UQFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm
+UQFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+50
+41
+Package_DFN_QFN
+UQFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm_ThermalVias
+UQFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+60
+41
+Package_DFN_QFN
+UQFN-48-1EP_6x6mm_P0.4mm_EP4.45x4.45mm
+UQFN, 48 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=347), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+58
+49
+Package_DFN_QFN
+UQFN-48-1EP_6x6mm_P0.4mm_EP4.45x4.45mm_ThermalVias
+UQFN, 48 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=347), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+68
+49
+Package_DFN_QFN
+UQFN-48-1EP_6x6mm_P0.4mm_EP4.62x4.62mm
+UQFN, 48 Pin (https://gitlab.com/kicad/libraries/kicad-symbols/-/merge_requests/1189#note_423250741), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+53
+49
+Package_DFN_QFN
+UQFN-48-1EP_6x6mm_P0.4mm_EP4.62x4.62mm_ThermalVias
+UQFN, 48 Pin (https://gitlab.com/kicad/libraries/kicad-symbols/-/merge_requests/1189#note_423250741), generated with kicad-footprint-generator ipc_noLead_generator.py
+UQFN NoLead
+0
+75
+49
+Package_DFN_QFN
+VDFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.7mm
+8-Lead Very Thin Dual Flatpack No-Lead (LZ) - 2x3x0.9 mm Body [VDFN] (see Microchip Packaging Specification 00000049BS.pdf)
+DFN 0.5
+0
+11
+9
+Package_DFN_QFN
+VQFN-12-1EP_4x4mm_P0.8mm_EP2.1x2.1mm
+VQFN, 12 Pin (https://www.mouser.ch/datasheet/2/268/EMC2301_2_3_5_Data_Sheet_DS20006532A-3443118.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+17
+13
+Package_DFN_QFN
+VQFN-12-1EP_4x4mm_P0.8mm_EP2.1x2.1mm_ThermalVias
+VQFN, 12 Pin (https://www.mouser.ch/datasheet/2/268/EMC2301_2_3_5_Data_Sheet_DS20006532A-3443118.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+22
+13
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mm
+VQFN, 16 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/16L_VQFN-WFS_3x3mm_4MX_C04-00508a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+18
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mm_ThermalVias
+VQFN, 16 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/16L_VQFN-WFS_3x3mm_4MX_C04-00508a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+20
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm
+VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias
+VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm
+VQFN, 16 Pin (https://www.st.com/resource/en/datasheet/stspin220.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm_ThermalVias
+VQFN, 16 Pin (https://www.st.com/resource/en/datasheet/stspin220.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm
+VQFN, 16 Pin (http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf, JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias
+VQFN, 16 Pin (http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf, JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm
+VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/tlv62095.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias
+VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/tlv62095.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm
+VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20%20Lead%20VQFN%203x3x0_9mm_1_7EP%20U2B%20C04-21496a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias
+VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20%20Lead%20VQFN%203x3x0_9mm_1_7EP%20U2B%20C04-21496a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+30
+21
+Package_DFN_QFN
+VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm
+VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=264), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+25
+21
+Package_DFN_QFN
+VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm_ThermalVias
+VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=264), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+30
+21
+Package_DFN_QFN
+VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
+VQFN, 24 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/product-documents/package-drawings/24L-VQFN%E2%80%934x4x0.9mm-MJ-C04-00143b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias
+VQFN, 24 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/product-documents/package-drawings/24L-VQFN%E2%80%934x4x0.9mm-MJ-C04-00143b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm
+VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430f1101a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+34
+25
+Package_DFN_QFN
+VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias
+VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430f1101a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+44
+25
+Package_DFN_QFN
+VQFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm
+VQFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+VQFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias
+VQFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+43
+29
+Package_DFN_QFN
+VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm
+VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/lm5175.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+35
+29
+Package_DFN_QFN
+VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm_ThermalVias
+VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/lm5175.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+48
+29
+Package_DFN_QFN
+VQFN-28-1EP_5x5mm_P0.5mm_EP3.7x3.7mm
+VQFN, 28 Pin (Based on JEDEC MO-220-K.01 variation VHHD-3 and exposed pad nominal size from ADI Trinamic / Analog Devices, https://www.jedec.org/system/files/docs/MO-220K01.pdf, https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2209_datasheet_rev1.09.pdf#page=83), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+VQFN-28-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias
+VQFN, 28 Pin (Based on JEDEC MO-220-K.01 variation VHHD-3 and exposed pad nominal size from ADI Trinamic / Analog Devices, https://www.jedec.org/system/files/docs/MO-220K01.pdf, https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2209_datasheet_rev1.09.pdf#page=83), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+50
+29
+Package_DFN_QFN
+VQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm
+VQFN, 28 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP251863-External-CAN-FD-Controller-with-Integrated-Transceiver-DS20006624.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+33
+29
+Package_DFN_QFN
+VQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias
+VQFN, 28 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP251863-External-CAN-FD-Controller-with-Integrated-Transceiver-DS20006624.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+43
+29
+Package_DFN_QFN
+VQFN-32-1EP_4x4mm_P0.4mm_EP2.8x2.8mm
+VQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/tps25750.pdf#page=78), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+VQFN-32-1EP_4x4mm_P0.4mm_EP2.8x2.8mm_ThermalVias
+VQFN, 32 Pin (https://www.ti.com/lit/ds/symlink/tps25750.pdf#page=78), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+VQFN, 32 Pin (http://ww1.microchip.com/downloads/en/devicedoc/atmel-9520-at42-qtouch-bsw-at42qt1110_datasheet.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias
+VQFN, 32 Pin (http://ww1.microchip.com/downloads/en/devicedoc/atmel-9520-at42-qtouch-bsw-at42qt1110_datasheet.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
+VQFN, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+VQFN, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.15x3.15mm
+VQFN, 32 Pin (https://www.ti.com/lit/ds/slvs589d/slvs589d.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+37
+33
+Package_DFN_QFN
+VQFN-32-1EP_5x5mm_P0.5mm_EP3.15x3.15mm_ThermalVias
+VQFN, 32 Pin (https://www.ti.com/lit/ds/slvs589d/slvs589d.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+47
+33
+Package_DFN_QFN
+VQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm
+VQFN, 40 Pin (Based on JEDEC MO-220-K.01, variation VHHE-1, https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP6536/document_id/3761/), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+45
+41
+Package_DFN_QFN
+VQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm_ThermalVias
+VQFN, 40 Pin (Based on JEDEC MO-220-K.01, variation VHHE-1, https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP6536/document_id/3761/), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+62
+41
+Package_DFN_QFN
+VQFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
+VQFN, 40 Pin (JEDEC MO-220-K.01, variation VHHE-1, https://www.jedec.org/system/files/docs/MO-220K01.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+45
+41
+Package_DFN_QFN
+VQFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm_ThermalVias
+VQFN, 40 Pin (JEDEC MO-220-K.01, variation VHHE-1, https://www.jedec.org/system/files/docs/MO-220K01.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+62
+41
+Package_DFN_QFN
+VQFN-40-1EP_6x6mm_P0.5mm_EP3.5x3.5mm
+VQFN, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/cp-40-29.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead Analog_CP-40-29
+0
+50
+41
+Package_DFN_QFN
+VQFN-40-1EP_6x6mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+VQFN, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/cp-40-29.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead Analog_CP-40-29
+0
+67
+41
+Package_DFN_QFN
+VQFN-46-1EP_5x6mm_P0.4mm_EP2.8x3.8mm
+VQFN, 46 Pin (http://www.ti.com/lit/ds/symlink/lp5036.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+53
+47
+Package_DFN_QFN
+VQFN-46-1EP_5x6mm_P0.4mm_EP2.8x3.8mm_ThermalVias
+VQFN, 46 Pin (http://www.ti.com/lit/ds/symlink/lp5036.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+66
+47
+Package_DFN_QFN
+VQFN-48-1EP_6x6mm_P0.4mm_EP4.1x4.1mm
+VQFN, 48 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/48L_VQFN_6x6mm_6LX_C04-00494a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+58
+49
+Package_DFN_QFN
+VQFN-48-1EP_6x6mm_P0.4mm_EP4.1x4.1mm_ThermalVias
+VQFN, 48 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/48L_VQFN_6x6mm_6LX_C04-00494a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+75
+49
+Package_DFN_QFN
+VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm
+VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc430f5137.pdf#page=128), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+58
+49
+Package_DFN_QFN
+VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias
+VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc430f5137.pdf#page=128), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+75
+49
+Package_DFN_QFN
+VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
+VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc1312r.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+53
+49
+Package_DFN_QFN
+VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias
+VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc1312r.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+79
+49
+Package_DFN_QFN
+VQFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm
+VQFN, 64 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/PIC16LF19195-6-7-Data-Sheet-40001873D.pdf#page=718), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+74
+65
+Package_DFN_QFN
+VQFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm_ThermalVias
+VQFN, 64 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/PIC16LF19195-6-7-Data-Sheet-40001873D.pdf#page=718), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+100
+65
+Package_DFN_QFN
+VQFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm
+VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_QFN_9x9_MR_C04-00149e.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+74
+65
+Package_DFN_QFN
+VQFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm_ThermalVias
+VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_QFN_9x9_MR_C04-00149e.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+91
+65
+Package_DFN_QFN
+VQFN-100-1EP_12x12mm_P0.4mm_EP8x8mm
+VQFN, 100 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/USB7206C-Data-Sheet-DS00003850.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+117
+101
+Package_DFN_QFN
+VQFN-100-1EP_12x12mm_P0.4mm_EP8x8mm_ThermalVias
+VQFN, 100 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/USB7206C-Data-Sheet-DS00003850.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+VQFN NoLead
+0
+143
+101
+Package_DFN_QFN
+Vishay_PowerPAK_MLP44-24L
+PowerPAK PowerPAK MLP44-24L (https://www.vishay.com/docs/78231/mlp44-24l.pdf)
+powerpak mlp44-24l
+0
+28
+28
+Package_DFN_QFN
+Vishay_PowerPAK_MLP44-24L_ThermalVias
+PowerPAK PowerPAK MLP44-24L (https://www.vishay.com/docs/78231/mlp44-24l.pdf)
+powerpak mlp44-24l
+0
+35
+28
+Package_DFN_QFN
+W-PDFN-8-1EP_6x5mm_P1.27mm_EP3x3mm
+W-PDFN, 8 Pin (https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py
+W-PDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm
+WCH  QFN, 16 Pin (https://www.wch.cn/downloads/PACKAGE_PDF.html), generated with kicad-footprint-generator ipc_noLead_generator.py
+WCH QFN NoLead
+0
+21
+17
+Package_DFN_QFN
+WDFN-6-2EP_4.0x2.6mm_P0.65mm
+WDFN, 6 pin, 4.0x2.6, 0.65P; Two exposed pads, (https://www.onsemi.com/pub/Collateral/511BZ.PDF)
+DFN 0.65P dual flag
+0
+8
+8
+Package_DFN_QFN
+WDFN-8-1EP_2x2.2mm_P0.5mm_EP0.80x0.54
+https://www.onsemi.com/pub/Collateral/511BN.PDF
+WDFN-8 1EP 2.2X2.0 0.5P
+0
+9
+9
+Package_DFN_QFN
+WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm
+WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20005474E.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+WDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm
+WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MNY_C04-0129E-MNY.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm
+WDFN, 8 Pin (https://www.onsemi.com/pub/Collateral/509AF.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm_ThermalVias
+WDFN, 8 Pin (https://www.onsemi.com/pub/Collateral/509AF.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+20
+9
+Package_DFN_QFN
+WDFN-8-1EP_6x5mm_P1.27mm_EP3.4x4mm
+WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_WDFN_5x6mm_MF_C04210B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+13
+9
+Package_DFN_QFN
+WDFN-8-1EP_8x6mm_P1.27mm_EP6x4.8mm
+WDFN, 8 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/8L_WDFN_6x8mm_MN_C04172A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead Microchip-8L-WDFN-6x8mm-MN-C04172A
+0
+21
+9
+Package_DFN_QFN
+WDFN-8-1EP_8x6mm_P1.27mm_EP6x4.8mm_ThermalVias
+WDFN, 8 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/8L_WDFN_6x8mm_MN_C04172A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead Microchip-8L-WDFN-6x8mm-MN-C04172A
+0
+42
+9
+Package_DFN_QFN
+WDFN-8_2x2mm_P0.5mm
+DFN8 2x2, 0.5P; No exposed pad (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF)
+DFN 0.5
+0
+8
+8
+Package_DFN_QFN
+WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm
+WDFN, 10 Pin (https://www.onsemi.com/pdf/datasheet/nis5420-d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+15
+11
+Package_DFN_QFN
+WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm_ThermalVias
+WDFN, 10 Pin (https://www.onsemi.com/pdf/datasheet/nis5420-d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+22
+11
+Package_DFN_QFN
+WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm
+WDFN, 12 Pin (https://www.diodes.com/assets/Datasheets/PAM2306.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WDFN NoLead
+0
+17
+13
+Package_DFN_QFN
+WFDFPN-8-1EP_3x2mm_P0.5mm_EP1.25x1.35mm
+WFDFPN, 8 Pin (https://www.st.com/resource/en/datasheet/m95512-r.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+WFDFPN NoLead
+0
+10
+9
+Package_DFN_QFN
+WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm
+WQFN, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+19
+15
+Package_DFN_QFN
+WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm_ThermalVias
+WQFN, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+24
+15
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm
+WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tpa6132a2.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias
+WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tpa6132a2.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm
+WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tlv9064.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias
+WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tlv9064.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm
+WQFN, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+WQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias
+WQFN, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+26
+17
+Package_DFN_QFN
+WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+21
+17
+Package_DFN_QFN
+WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+31
+17
+Package_DFN_QFN
+WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm
+http://www.onsemi.com/pub/Collateral/510CD.PDF
+WQFN-20 4.5mm 2.5mm 0.5mm
+0
+24
+21
+Package_DFN_QFN
+WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm
+WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead Texas_RUK0020B
+0
+25
+21
+Package_DFN_QFN
+WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias
+WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead Texas_RUK0020B
+0
+30
+21
+Package_DFN_QFN
+WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
+WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/lm26480.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias
+WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/lm26480.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm
+WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/ts3a27518e.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+29
+25
+Package_DFN_QFN
+WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias
+WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/ts3a27518e.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+39
+25
+Package_DFN_QFN
+WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm
+WQFN, 28 Pin (Based on JEDEC MO-220-K.01 variation WGGE and exposed pad from Maxim / Analog Devices, https://www.jedec.org/system/files/docs/MO-220K01.pdf, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead T2844-1 T2844-1C T2844Y-1C
+0
+33
+29
+Package_DFN_QFN
+WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm_ThermalVias
+WQFN, 28 Pin (Based on JEDEC MO-220-K.01 variation WGGE and exposed pad from Maxim / Analog Devices, https://www.jedec.org/system/files/docs/MO-220K01.pdf, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfn/21-0139.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead T2844-1 T2844-1C T2844Y-1C
+0
+43
+29
+Package_DFN_QFN
+WQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm
+QFN, 32-Leads, Body 5x5x0.8mm, Pitch 0.5mm, Thermal Pad 3.1x3.1mm; (see Texas Instruments LM25119 http://www.ti.com/lit/ds/symlink/lm25119.pdf)
+WQFN 0.5
+0
+37
+33
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP2.7x4.7mm
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD, https://www.jedec.org/document_search?search_api_views_fulltext=MO-220), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+45
+39
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP2.7x4.7mm_ThermalVias
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD, https://www.jedec.org/document_search?search_api_views_fulltext=MO-220), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+61
+39
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP3.15x5.15mm
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD (with exposed pad size from Linear Technology / Analog Devices), https://www.jedec.org/document_search?search_api_views_fulltext=MO-220, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1701.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead UHF
+0
+45
+39
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP3.15x5.15mm_ThermalVias
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD (with exposed pad size from Linear Technology / Analog Devices), https://www.jedec.org/document_search?search_api_views_fulltext=MO-220, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1701.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead UHF
+0
+61
+39
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP3.65x5.65mm
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD-1, https://www.jedec.org/document_search?search_api_views_fulltext=MO-220), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead TQFN T3857-1C T3857M-1
+0
+45
+39
+Package_DFN_QFN
+WQFN-38-1EP_5x7mm_P0.5mm_EP3.65x5.65mm_ThermalVias
+WQFN, 38 Pin (JEDEC MO-220 variation WHKD-1, https://www.jedec.org/document_search?search_api_views_fulltext=MO-220), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead TQFN T3857-1C T3857M-1
+0
+70
+39
+Package_DFN_QFN
+WQFN-42-1EP_3.5x9mm_P0.5mm_EP2.05x7.55mm
+WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+57
+43
+Package_DFN_QFN
+WQFN-42-1EP_3.5x9mm_P0.5mm_EP2.05x7.55mm_ThermalVias
+WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py
+WQFN NoLead
+0
+82
+43
+Package_DIP
+CERDIP-8_W7.62mm_SideBrazed
+8-lead through-hole mounted CERDIP, JEDEC MS-015-AA package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+8
+8
+Package_DIP
+CERDIP-8_W7.62mm_SideBrazed_LongPads
+8-lead through-hole mounted CERDIP, JEDEC MS-015-AA package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+8
+8
+Package_DIP
+CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket
+8-lead through-hole mounted CERDIP, JEDEC MS-015-AA package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+8
+8
+Package_DIP
+CERDIP-8_W7.62mm_SideBrazed_Socket
+8-lead through-hole mounted CERDIP, JEDEC MS-015-AA package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+8
+8
+Package_DIP
+CERDIP-14_W7.62mm_SideBrazed
+14-lead through-hole mounted CERDIP, JEDEC MS-015-AB package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+14
+14
+Package_DIP
+CERDIP-14_W7.62mm_SideBrazed_LongPads
+14-lead through-hole mounted CERDIP, JEDEC MS-015-AB package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+14
+14
+Package_DIP
+CERDIP-14_W7.62mm_SideBrazed_LongPads_Socket
+14-lead through-hole mounted CERDIP, JEDEC MS-015-AB package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+14
+14
+Package_DIP
+CERDIP-14_W7.62mm_SideBrazed_Socket
+14-lead through-hole mounted CERDIP, JEDEC MS-015-AB package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+14
+14
+Package_DIP
+CERDIP-16_W7.62mm_SideBrazed
+16-lead through-hole mounted CERDIP, JEDEC MS-015-AC package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+16
+16
+Package_DIP
+CERDIP-16_W7.62mm_SideBrazed_LongPads
+16-lead through-hole mounted CERDIP, JEDEC MS-015-AC package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+16
+16
+Package_DIP
+CERDIP-16_W7.62mm_SideBrazed_LongPads_Socket
+16-lead through-hole mounted CERDIP, JEDEC MS-015-AC package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+16
+16
+Package_DIP
+CERDIP-16_W7.62mm_SideBrazed_Socket
+16-lead through-hole mounted CERDIP, JEDEC MS-015-AC package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+16
+16
+Package_DIP
+CERDIP-18_W7.62mm_SideBrazed
+18-lead through-hole mounted CERDIP, JEDEC MS-015-AD package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+18
+18
+Package_DIP
+CERDIP-18_W7.62mm_SideBrazed_LongPads
+18-lead through-hole mounted CERDIP, JEDEC MS-015-AD package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+18
+18
+Package_DIP
+CERDIP-18_W7.62mm_SideBrazed_LongPads_Socket
+18-lead through-hole mounted CERDIP, JEDEC MS-015-AD package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+18
+18
+Package_DIP
+CERDIP-18_W7.62mm_SideBrazed_Socket
+18-lead through-hole mounted CERDIP, JEDEC MS-015-AD package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+18
+18
+Package_DIP
+CERDIP-20_W7.62mm_SideBrazed
+20-lead through-hole mounted CERDIP, JEDEC MS-015-AE package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+20
+20
+Package_DIP
+CERDIP-20_W7.62mm_SideBrazed_LongPads
+20-lead through-hole mounted CERDIP, JEDEC MS-015-AE package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+20
+20
+Package_DIP
+CERDIP-20_W7.62mm_SideBrazed_LongPads_Socket
+20-lead through-hole mounted CERDIP, JEDEC MS-015-AE package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+20
+20
+Package_DIP
+CERDIP-20_W7.62mm_SideBrazed_Socket
+20-lead through-hole mounted CERDIP, JEDEC MS-015-AE package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+20
+20
+Package_DIP
+CERDIP-22_W7.62mm_SideBrazed
+22-lead through-hole mounted CERDIP, JEDEC MS-015-AF package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+22
+22
+Package_DIP
+CERDIP-22_W7.62mm_SideBrazed_LongPads
+22-lead through-hole mounted CERDIP, JEDEC MS-015-AF package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+22
+22
+Package_DIP
+CERDIP-22_W7.62mm_SideBrazed_LongPads_Socket
+22-lead through-hole mounted CERDIP, JEDEC MS-015-AF package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+22
+22
+Package_DIP
+CERDIP-22_W7.62mm_SideBrazed_Socket
+22-lead through-hole mounted CERDIP, JEDEC MS-015-AF package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+22
+22
+Package_DIP
+CERDIP-24_W7.62mm_SideBrazed
+24-lead through-hole mounted CERDIP, JEDEC MS-015-AG package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+24
+24
+Package_DIP
+CERDIP-24_W7.62mm_SideBrazed_LongPads
+24-lead through-hole mounted CERDIP, JEDEC MS-015-AG package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+24
+24
+Package_DIP
+CERDIP-24_W7.62mm_SideBrazed_LongPads_Socket
+24-lead through-hole mounted CERDIP, JEDEC MS-015-AG package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+24
+24
+Package_DIP
+CERDIP-24_W7.62mm_SideBrazed_Socket
+24-lead through-hole mounted CERDIP, JEDEC MS-015-AG package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+24
+24
+Package_DIP
+CERDIP-28_W7.62mm_SideBrazed
+28-lead through-hole mounted CERDIP, JEDEC MS-015-AH package, row spacing 7.62mm (300 mils), SideBrazed, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed
+0
+28
+28
+Package_DIP
+CERDIP-28_W7.62mm_SideBrazed_LongPads
+28-lead through-hole mounted CERDIP, JEDEC MS-015-AH package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads
+0
+28
+28
+Package_DIP
+CERDIP-28_W7.62mm_SideBrazed_LongPads_Socket
+28-lead through-hole mounted CERDIP, JEDEC MS-015-AH package, row spacing 7.62mm (300 mils), SideBrazed, LongPads, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed LongPads Socket
+0
+28
+28
+Package_DIP
+CERDIP-28_W7.62mm_SideBrazed_Socket
+28-lead through-hole mounted CERDIP, JEDEC MS-015-AH package, row spacing 7.62mm (300 mils), SideBrazed, Socket, https://www.jedec.org/system/files/docs/Ms-015a.pdf
+THT DIP DIL CERDIP ceramic 2.54mm 7.62mm 300mil SideBrazed Socket
+0
+28
+28
+Package_DIP
+DIP-4_W7.62mm
+4-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+4
+4
+Package_DIP
+DIP-4_W7.62mm_LongPads
+4-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+4
+4
+Package_DIP
+DIP-4_W7.62mm_SMDSocket_SmallPads
+4-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+4
+4
+Package_DIP
+DIP-4_W7.62mm_Socket
+4-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+4
+4
+Package_DIP
+DIP-4_W7.62mm_Socket_LongPads
+4-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+4
+4
+Package_DIP
+DIP-4_W8.89mm_SMDSocket_LongPads
+4-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+4
+4
+Package_DIP
+DIP-4_W10.16mm
+4-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+4
+4
+Package_DIP
+DIP-4_W10.16mm_LongPads
+4-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+4
+4
+Package_DIP
+DIP-5-6_W7.62mm
+5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+5
+5
+Package_DIP
+DIP-5-6_W7.62mm_LongPads
+5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+5
+5
+Package_DIP
+DIP-5-6_W7.62mm_SMDSocket_SmallPads
+5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+5
+5
+Package_DIP
+DIP-5-6_W7.62mm_Socket
+5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+5
+5
+Package_DIP
+DIP-5-6_W7.62mm_Socket_LongPads
+5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+5
+5
+Package_DIP
+DIP-5-6_W8.89mm_SMDSocket_LongPads
+5-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+5
+5
+Package_DIP
+DIP-5-6_W10.16mm
+5-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+5
+5
+Package_DIP
+DIP-5-6_W10.16mm_LongPads
+5-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+5
+5
+Package_DIP
+DIP-6_W7.62mm
+6-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+6
+6
+Package_DIP
+DIP-6_W7.62mm_LongPads
+6-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+6
+6
+Package_DIP
+DIP-6_W7.62mm_SMDSocket_SmallPads
+6-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+6
+6
+Package_DIP
+DIP-6_W7.62mm_Socket
+6-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+6
+6
+Package_DIP
+DIP-6_W7.62mm_Socket_LongPads
+6-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+6
+6
+Package_DIP
+DIP-6_W8.89mm_SMDSocket_LongPads
+6-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+6
+6
+Package_DIP
+DIP-6_W10.16mm
+6-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+6
+6
+Package_DIP
+DIP-6_W10.16mm_LongPads
+6-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+6
+6
+Package_DIP
+DIP-8-16_W7.62mm
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+8
+8
+Package_DIP
+DIP-8-16_W7.62mm_Socket
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+8
+8
+Package_DIP
+DIP-8-16_W7.62mm_Socket_LongPads
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+8
+8
+Package_DIP
+DIP-8-N6_W7.62mm
+8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), missing pin 6
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+7
+7
+Package_DIP
+DIP-8-N7_W7.62mm
+8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), missing pin 7
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+7
+7
+Package_DIP
+DIP-8_W7.62mm
+8-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+8
+8
+Package_DIP
+DIP-8_W7.62mm_LongPads
+8-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+8
+8
+Package_DIP
+DIP-8_W7.62mm_SMDSocket_SmallPads
+8-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+8
+8
+Package_DIP
+DIP-8_W7.62mm_Socket
+8-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+8
+8
+Package_DIP
+DIP-8_W7.62mm_Socket_LongPads
+8-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+8
+8
+Package_DIP
+DIP-8_W8.89mm_SMDSocket_LongPads
+8-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+8
+8
+Package_DIP
+DIP-8_W10.16mm
+8-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+8
+8
+Package_DIP
+DIP-8_W10.16mm_LongPads
+8-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+8
+8
+Package_DIP
+DIP-10_W7.62mm
+10-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+10
+10
+Package_DIP
+DIP-10_W7.62mm_LongPads
+10-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+10
+10
+Package_DIP
+DIP-10_W7.62mm_SMDSocket_SmallPads
+10-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+10
+10
+Package_DIP
+DIP-10_W7.62mm_Socket
+10-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+10
+10
+Package_DIP
+DIP-10_W7.62mm_Socket_LongPads
+10-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+10
+10
+Package_DIP
+DIP-10_W8.89mm_SMDSocket_LongPads
+10-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+10
+10
+Package_DIP
+DIP-10_W10.16mm
+10-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+10
+10
+Package_DIP
+DIP-10_W10.16mm_LongPads
+10-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+10
+10
+Package_DIP
+DIP-12_W7.62mm
+12-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+12
+12
+Package_DIP
+DIP-12_W7.62mm_LongPads
+12-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+12
+12
+Package_DIP
+DIP-12_W7.62mm_SMDSocket_SmallPads
+12-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+12
+12
+Package_DIP
+DIP-12_W7.62mm_Socket
+12-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+12
+12
+Package_DIP
+DIP-12_W7.62mm_Socket_LongPads
+12-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+12
+12
+Package_DIP
+DIP-12_W8.89mm_SMDSocket_LongPads
+12-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+12
+12
+Package_DIP
+DIP-12_W10.16mm
+12-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+12
+12
+Package_DIP
+DIP-12_W10.16mm_LongPads
+12-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+12
+12
+Package_DIP
+DIP-14_W7.62mm
+14-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+14
+14
+Package_DIP
+DIP-14_W7.62mm_LongPads
+14-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+14
+14
+Package_DIP
+DIP-14_W7.62mm_SMDSocket_SmallPads
+14-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+14
+14
+Package_DIP
+DIP-14_W7.62mm_Socket
+14-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+14
+14
+Package_DIP
+DIP-14_W7.62mm_Socket_LongPads
+14-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+14
+14
+Package_DIP
+DIP-14_W8.89mm_SMDSocket_LongPads
+14-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+14
+14
+Package_DIP
+DIP-14_W10.16mm
+14-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+14
+14
+Package_DIP
+DIP-14_W10.16mm_LongPads
+14-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+14
+14
+Package_DIP
+DIP-16_W7.62mm
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+16
+16
+Package_DIP
+DIP-16_W7.62mm_LongPads
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+16
+16
+Package_DIP
+DIP-16_W7.62mm_SMDSocket_SmallPads
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+16
+16
+Package_DIP
+DIP-16_W7.62mm_Socket
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+16
+16
+Package_DIP
+DIP-16_W7.62mm_Socket_LongPads
+16-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+16
+16
+Package_DIP
+DIP-16_W8.89mm_SMDSocket_LongPads
+16-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+16
+16
+Package_DIP
+DIP-16_W10.16mm
+16-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+16
+16
+Package_DIP
+DIP-16_W10.16mm_LongPads
+16-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+16
+16
+Package_DIP
+DIP-18_W7.62mm
+18-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+18
+18
+Package_DIP
+DIP-18_W7.62mm_LongPads
+18-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+18
+18
+Package_DIP
+DIP-18_W7.62mm_SMDSocket_SmallPads
+18-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+18
+18
+Package_DIP
+DIP-18_W7.62mm_Socket
+18-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+18
+18
+Package_DIP
+DIP-18_W7.62mm_Socket_LongPads
+18-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+18
+18
+Package_DIP
+DIP-18_W8.89mm_SMDSocket_LongPads
+18-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+18
+18
+Package_DIP
+DIP-20_W7.62mm
+20-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+20
+20
+Package_DIP
+DIP-20_W7.62mm_LongPads
+20-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+20
+20
+Package_DIP
+DIP-20_W7.62mm_SMDSocket_SmallPads
+20-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+20
+20
+Package_DIP
+DIP-20_W7.62mm_Socket
+20-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+20
+20
+Package_DIP
+DIP-20_W7.62mm_Socket_LongPads
+20-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+20
+20
+Package_DIP
+DIP-20_W8.89mm_SMDSocket_LongPads
+20-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+20
+20
+Package_DIP
+DIP-22_W7.62mm
+22-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+22
+22
+Package_DIP
+DIP-22_W7.62mm_LongPads
+22-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+22
+22
+Package_DIP
+DIP-22_W7.62mm_SMDSocket_SmallPads
+22-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+22
+22
+Package_DIP
+DIP-22_W7.62mm_Socket
+22-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+22
+22
+Package_DIP
+DIP-22_W7.62mm_Socket_LongPads
+22-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+22
+22
+Package_DIP
+DIP-22_W8.89mm_SMDSocket_LongPads
+22-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+22
+22
+Package_DIP
+DIP-22_W10.16mm
+22-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+22
+22
+Package_DIP
+DIP-22_W10.16mm_LongPads
+22-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+22
+22
+Package_DIP
+DIP-22_W10.16mm_SMDSocket_SmallPads
+22-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil SMDSocket SmallPads
+0
+22
+22
+Package_DIP
+DIP-22_W10.16mm_Socket
+22-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), Socket
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket
+0
+22
+22
+Package_DIP
+DIP-22_W10.16mm_Socket_LongPads
+22-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket LongPads
+0
+22
+22
+Package_DIP
+DIP-22_W11.43mm_SMDSocket_LongPads
+22-lead though-hole mounted DIP package, row spacing 11.43mm (450 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 11.43mm 450mil SMDSocket LongPads
+0
+22
+22
+Package_DIP
+DIP-24_18.0mmx34.29mm_W15.24mm
+24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) https://www.mouser.at/datasheet/2/389/m48t02-1849963.pdf
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil PCDIP24 CAPHAT M48T02 M48T12 M48Z02 M48Z12
+0
+24
+24
+Package_DIP
+DIP-24_18.0mmx34.29mm_W15.24mm_LongPads
+24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) https://www.mouser.at/datasheet/2/389/m48t02-1849963.pdf
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil PCDIP24 CAPHAT M48T02 M48T12 M48Z02 M48Z12
+0
+24
+24
+Package_DIP
+DIP-24_18.0mmx34.29mm_W15.24mm_SMDSocket_SmallPads
+24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) https://www.mouser.at/datasheet/2/389/m48t02-1849963.pdf
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil PCDIP24 CAPHAT M48T02 M48T12 M48Z02 M48Z12
+0
+24
+24
+Package_DIP
+DIP-24_18.0mmx34.29mm_W15.24mm_Socket
+24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) https://www.mouser.at/datasheet/2/389/m48t02-1849963.pdf
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil PCDIP24 CAPHAT M48T02 M48T12 M48Z02 M48Z12
+0
+24
+24
+Package_DIP
+DIP-24_18.0mmx34.29mm_W15.24mm_Socket_LongPads
+24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) https://www.mouser.at/datasheet/2/389/m48t02-1849963.pdf
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil PCDIP24 CAPHAT M48T02 M48T12 M48Z02 M48Z12
+0
+24
+24
+Package_DIP
+DIP-24_W7.62mm
+24-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+24
+24
+Package_DIP
+DIP-24_W7.62mm_LongPads
+24-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W7.62mm_SMDSocket_SmallPads
+24-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+24
+24
+Package_DIP
+DIP-24_W7.62mm_Socket
+24-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+24
+24
+Package_DIP
+DIP-24_W7.62mm_Socket_LongPads
+24-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W8.89mm_SMDSocket_LongPads
+24-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W10.16mm
+24-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils)
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil
+0
+24
+24
+Package_DIP
+DIP-24_W10.16mm_LongPads
+24-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W10.16mm_SMDSocket_SmallPads
+24-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil SMDSocket SmallPads
+0
+24
+24
+Package_DIP
+DIP-24_W10.16mm_Socket
+24-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), Socket
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket
+0
+24
+24
+Package_DIP
+DIP-24_W10.16mm_Socket_LongPads
+24-lead though-hole mounted DIP package, row spacing 10.16mm (400 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W11.43mm_SMDSocket_LongPads
+24-lead though-hole mounted DIP package, row spacing 11.43mm (450 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 11.43mm 450mil SMDSocket LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W15.24mm
+24-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+24
+24
+Package_DIP
+DIP-24_W15.24mm_LongPads
+24-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W15.24mm_SMDSocket_SmallPads
+24-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+24
+24
+Package_DIP
+DIP-24_W15.24mm_Socket
+24-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+24
+24
+Package_DIP
+DIP-24_W15.24mm_Socket_LongPads
+24-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+24
+24
+Package_DIP
+DIP-24_W16.51mm_SMDSocket_LongPads
+24-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+24
+24
+Package_DIP
+DIP-26_W15.24mm
+26-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+26
+26
+Package_DIP
+DIP-26_W15.24mm_LongPads
+26-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+26
+26
+Package_DIP
+DIP-26_W15.24mm_SMDSocket_SmallPads
+26-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+26
+26
+Package_DIP
+DIP-26_W15.24mm_Socket
+26-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+26
+26
+Package_DIP
+DIP-26_W15.24mm_Socket_LongPads
+26-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+26
+26
+Package_DIP
+DIP-26_W16.51mm_SMDSocket_LongPads
+26-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+26
+26
+Package_DIP
+DIP-28_W7.62mm
+28-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils)
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+28
+28
+Package_DIP
+DIP-28_W7.62mm_LongPads
+28-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+28
+28
+Package_DIP
+DIP-28_W7.62mm_SMDSocket_SmallPads
+28-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads
+0
+28
+28
+Package_DIP
+DIP-28_W7.62mm_Socket
+28-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket
+0
+28
+28
+Package_DIP
+DIP-28_W7.62mm_Socket_LongPads
+28-lead though-hole mounted DIP package, row spacing 7.62mm (300 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads
+0
+28
+28
+Package_DIP
+DIP-28_W8.89mm_SMDSocket_LongPads
+28-lead though-hole mounted DIP package, row spacing 8.89mm (350 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads
+0
+28
+28
+Package_DIP
+DIP-28_W15.24mm
+28-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+28
+28
+Package_DIP
+DIP-28_W15.24mm_LongPads
+28-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+28
+28
+Package_DIP
+DIP-28_W15.24mm_SMDSocket_SmallPads
+28-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+28
+28
+Package_DIP
+DIP-28_W15.24mm_Socket
+28-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+28
+28
+Package_DIP
+DIP-28_W15.24mm_Socket_LongPads
+28-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+28
+28
+Package_DIP
+DIP-28_W16.51mm_SMDSocket_LongPads
+28-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+28
+28
+Package_DIP
+DIP-32_W7.62mm
+32-lead dip package, row spacing 7.62 mm (300 mils)
+DIL DIP PDIP 2.54mm 7.62mm 300mil
+0
+32
+32
+Package_DIP
+DIP-32_W15.24mm
+32-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+32
+32
+Package_DIP
+DIP-32_W15.24mm_LongPads
+32-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+32
+32
+Package_DIP
+DIP-32_W15.24mm_SMDSocket_SmallPads
+32-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+32
+32
+Package_DIP
+DIP-32_W15.24mm_Socket
+32-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+32
+32
+Package_DIP
+DIP-32_W15.24mm_Socket_LongPads
+32-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+32
+32
+Package_DIP
+DIP-32_W16.51mm_SMDSocket_LongPads
+32-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+32
+32
+Package_DIP
+DIP-40_W15.24mm
+40-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+40
+40
+Package_DIP
+DIP-40_W15.24mm_LongPads
+40-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+40
+40
+Package_DIP
+DIP-40_W15.24mm_SMDSocket_SmallPads
+40-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+40
+40
+Package_DIP
+DIP-40_W15.24mm_Socket
+40-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+40
+40
+Package_DIP
+DIP-40_W15.24mm_Socket_LongPads
+40-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+40
+40
+Package_DIP
+DIP-40_W16.51mm_SMDSocket_LongPads
+40-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+40
+40
+Package_DIP
+DIP-40_W25.4mm
+40-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils)
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil
+0
+40
+40
+Package_DIP
+DIP-40_W25.4mm_LongPads
+40-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), LongPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil LongPads
+0
+40
+40
+Package_DIP
+DIP-40_W25.4mm_SMDSocket_SmallPads
+40-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil SMDSocket SmallPads
+0
+40
+40
+Package_DIP
+DIP-40_W25.4mm_Socket
+40-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), Socket
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket
+0
+40
+40
+Package_DIP
+DIP-40_W25.4mm_Socket_LongPads
+40-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket LongPads
+0
+40
+40
+Package_DIP
+DIP-40_W26.67mm_SMDSocket_LongPads
+40-lead though-hole mounted DIP package, row spacing 26.67mm (1050 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 26.669999999999998mm 1050mil SMDSocket LongPads
+0
+40
+40
+Package_DIP
+DIP-42_W15.24mm
+42-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+42
+42
+Package_DIP
+DIP-42_W15.24mm_LongPads
+42-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+42
+42
+Package_DIP
+DIP-42_W15.24mm_SMDSocket_SmallPads
+42-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+42
+42
+Package_DIP
+DIP-42_W15.24mm_Socket
+42-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+42
+42
+Package_DIP
+DIP-42_W15.24mm_Socket_LongPads
+42-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+42
+42
+Package_DIP
+DIP-42_W16.51mm_SMDSocket_LongPads
+42-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+42
+42
+Package_DIP
+DIP-48_W15.24mm
+48-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+48
+48
+Package_DIP
+DIP-48_W15.24mm_LongPads
+48-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+48
+48
+Package_DIP
+DIP-48_W15.24mm_SMDSocket_SmallPads
+48-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+48
+48
+Package_DIP
+DIP-48_W15.24mm_Socket
+48-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+48
+48
+Package_DIP
+DIP-48_W15.24mm_Socket_LongPads
+48-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+48
+48
+Package_DIP
+DIP-48_W16.51mm_SMDSocket_LongPads
+48-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+48
+48
+Package_DIP
+DIP-64_W15.24mm
+64-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils)
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil
+0
+64
+64
+Package_DIP
+DIP-64_W15.24mm_LongPads
+64-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W15.24mm_SMDSocket_SmallPads
+64-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads
+0
+64
+64
+Package_DIP
+DIP-64_W15.24mm_Socket
+64-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket
+0
+64
+64
+Package_DIP
+DIP-64_W15.24mm_Socket_LongPads
+64-lead though-hole mounted DIP package, row spacing 15.24mm (600 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W16.51mm_SMDSocket_LongPads
+64-lead though-hole mounted DIP package, row spacing 16.51mm (650 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W22.86mm
+64-lead though-hole mounted DIP package, row spacing 22.86mm (900 mils)
+THT DIP DIL PDIP 2.54mm 22.86mm 900mil
+0
+64
+64
+Package_DIP
+DIP-64_W22.86mm_LongPads
+64-lead though-hole mounted DIP package, row spacing 22.86mm (900 mils), LongPads
+THT DIP DIL PDIP 2.54mm 22.86mm 900mil LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W22.86mm_SMDSocket_SmallPads
+64-lead though-hole mounted DIP package, row spacing 22.86mm (900 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 22.86mm 900mil SMDSocket SmallPads
+0
+64
+64
+Package_DIP
+DIP-64_W22.86mm_Socket
+64-lead though-hole mounted DIP package, row spacing 22.86mm (900 mils), Socket
+THT DIP DIL PDIP 2.54mm 22.86mm 900mil Socket
+0
+64
+64
+Package_DIP
+DIP-64_W22.86mm_Socket_LongPads
+64-lead though-hole mounted DIP package, row spacing 22.86mm (900 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 22.86mm 900mil Socket LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W24.13mm_SMDSocket_LongPads
+64-lead though-hole mounted DIP package, row spacing 24.13mm (950 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 24.13mm 950mil SMDSocket LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W25.4mm
+64-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils)
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil
+0
+64
+64
+Package_DIP
+DIP-64_W25.4mm_LongPads
+64-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), LongPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W25.4mm_SMDSocket_SmallPads
+64-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), SMDSocket, SmallPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil SMDSocket SmallPads
+0
+64
+64
+Package_DIP
+DIP-64_W25.4mm_Socket
+64-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), Socket
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket
+0
+64
+64
+Package_DIP
+DIP-64_W25.4mm_Socket_LongPads
+64-lead though-hole mounted DIP package, row spacing 25.4mm (1000 mils), Socket, LongPads
+THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket LongPads
+0
+64
+64
+Package_DIP
+DIP-64_W26.67mm_SMDSocket_LongPads
+64-lead though-hole mounted DIP package, row spacing 26.67mm (1050 mils), SMDSocket, LongPads
+THT DIP DIL PDIP 2.54mm 26.669999999999998mm 1050mil SMDSocket LongPads
+0
+64
+64
+Package_DIP
+Fairchild_LSOP-8
+8-Lead, 300\" Wide, Surface Mount Package (https://www.fairchildsemi.com/package-drawings/ML/MLSOP08A.pdf)
+LSOP 2.54mm 300mil
+0
+8
+8
+Package_DIP
+IXYS_Flatpak-8_6.3x9.7mm_P2.54mm
+IXYS  Flatpak, 8 Pin (https://www.littelfuse.com/media?resourcetype=datasheets&itemid=996c6e8f-cc1b-44f6-811e-251c6e004c56&filename=littelfuse-integrated-circuits-loc112-datasheet), generated with kicad-footprint-generator ipc_gullwing_generator.py
+IXYS Flatpak DIP
+0
+8
+8
+Package_DIP
+IXYS_SMD-8_6.3x9.7mm_P2.54mm
+IXYS  Flatpak, 8 Pin (https://www.littelfuse.com/media?resourcetype=datasheets&itemid=996c6e8f-cc1b-44f6-811e-251c6e004c56&filename=littelfuse-integrated-circuits-loc112-datasheet), generated with kicad-footprint-generator ipc_gullwing_generator.py
+IXYS Flatpak DIP
+0
+8
+8
+Package_DIP
+PowerIntegrations_PDIP-8B
+Power Integrations variant of 8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://www.power.com/sites/default/files/product-docs/lnk520.pdf
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+7
+7
+Package_DIP
+PowerIntegrations_PDIP-8C
+Power Integrations variant of 8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://ac-dc.power.com/sites/default/files/product-docs/tinyswitch-iii_family_datasheet.pdf
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+7
+7
+Package_DIP
+PowerIntegrations_SDIP-10C
+PowerIntegrations variant of 10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://www.power.com/sites/default/files/product-docs/tophx_family_datasheet.pdf
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads
+0
+9
+9
+Package_DIP
+PowerIntegrations_SMD-8
+PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://www.power.com/sites/default/files/product-docs/lnk520.pdf
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+8
+8
+Package_DIP
+PowerIntegrations_SMD-8B
+PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://www.power.com/sites/default/files/product-docs/lnk520.pdf
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+7
+7
+Package_DIP
+PowerIntegrations_SMD-8C
+PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://ac-dc.power.com/sites/default/files/product-docs/tinyswitch-iii_family_datasheet.pdf
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+7
+7
+Package_DIP
+PowerIntegrations_eDIP-12B
+Power Integrations eDIP-12B, see https://www.power.com/sites/default/files/product-docs/linkswitch-pl_family_datasheet.pdf
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil
+0
+11
+11
+Package_DIP
+SMDIP-4_W7.62mm
+4-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+4
+4
+Package_DIP
+SMDIP-4_W9.53mm
+4-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+4
+4
+Package_DIP
+SMDIP-4_W9.53mm_Clearance8mm
+4-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+4
+4
+Package_DIP
+SMDIP-4_W11.48mm
+4-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+4
+4
+Package_DIP
+SMDIP-6_W7.62mm
+6-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+6
+6
+Package_DIP
+SMDIP-6_W9.53mm
+6-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+6
+6
+Package_DIP
+SMDIP-6_W9.53mm_Clearance8mm
+6-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+6
+6
+Package_DIP
+SMDIP-6_W11.48mm
+6-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+6
+6
+Package_DIP
+SMDIP-8_W7.62mm
+8-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+8
+8
+Package_DIP
+SMDIP-8_W9.53mm
+8-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+8
+8
+Package_DIP
+SMDIP-8_W9.53mm_Clearance8mm
+8-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+8
+8
+Package_DIP
+SMDIP-8_W11.48mm
+8-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+8
+8
+Package_DIP
+SMDIP-10_W7.62mm
+10-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+10
+10
+Package_DIP
+SMDIP-10_W9.53mm
+10-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+10
+10
+Package_DIP
+SMDIP-10_W9.53mm_Clearance8mm
+10-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+10
+10
+Package_DIP
+SMDIP-10_W11.48mm
+10-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+10
+10
+Package_DIP
+SMDIP-12_W7.62mm
+12-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+12
+12
+Package_DIP
+SMDIP-12_W9.53mm
+12-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+12
+12
+Package_DIP
+SMDIP-12_W9.53mm_Clearance8mm
+12-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+12
+12
+Package_DIP
+SMDIP-12_W11.48mm
+12-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+12
+12
+Package_DIP
+SMDIP-14_W7.62mm
+14-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+14
+14
+Package_DIP
+SMDIP-14_W9.53mm
+14-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+14
+14
+Package_DIP
+SMDIP-14_W9.53mm_Clearance8mm
+14-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+14
+14
+Package_DIP
+SMDIP-14_W11.48mm
+14-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+14
+14
+Package_DIP
+SMDIP-16_W7.62mm
+16-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+16
+16
+Package_DIP
+SMDIP-16_W9.53mm
+16-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+16
+16
+Package_DIP
+SMDIP-16_W9.53mm_Clearance8mm
+16-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+16
+16
+Package_DIP
+SMDIP-16_W11.48mm
+16-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+16
+16
+Package_DIP
+SMDIP-18_W7.62mm
+18-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+18
+18
+Package_DIP
+SMDIP-18_W9.53mm
+18-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+18
+18
+Package_DIP
+SMDIP-18_W9.53mm_Clearance8mm
+18-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+18
+18
+Package_DIP
+SMDIP-18_W11.48mm
+18-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+18
+18
+Package_DIP
+SMDIP-20_W7.62mm
+20-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+20
+20
+Package_DIP
+SMDIP-20_W9.53mm
+20-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+20
+20
+Package_DIP
+SMDIP-20_W9.53mm_Clearance8mm
+20-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+20
+20
+Package_DIP
+SMDIP-20_W11.48mm
+20-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+20
+20
+Package_DIP
+SMDIP-22_W7.62mm
+22-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+22
+22
+Package_DIP
+SMDIP-22_W9.53mm
+22-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+22
+22
+Package_DIP
+SMDIP-22_W9.53mm_Clearance8mm
+22-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils), Clearance8mm
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm
+0
+22
+22
+Package_DIP
+SMDIP-22_W11.48mm
+22-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+22
+22
+Package_DIP
+SMDIP-24_W7.62mm
+24-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+24
+24
+Package_DIP
+SMDIP-24_W9.53mm
+24-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+24
+24
+Package_DIP
+SMDIP-24_W11.48mm
+24-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+24
+24
+Package_DIP
+SMDIP-24_W15.24mm
+24-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+24
+24
+Package_DIP
+SMDIP-28_W15.24mm
+28-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+28
+28
+Package_DIP
+SMDIP-32_W7.62mm
+32-lead surface-mounted (SMD) DIP package, row spacing 7.62mm (300 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil
+0
+32
+32
+Package_DIP
+SMDIP-32_W9.53mm
+32-lead surface-mounted (SMD) DIP package, row spacing 9.53mm (375 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil
+0
+32
+32
+Package_DIP
+SMDIP-32_W11.48mm
+32-lead surface-mounted (SMD) DIP package, row spacing 11.48mm (451 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil
+0
+32
+32
+Package_DIP
+SMDIP-32_W15.24mm
+32-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+32
+32
+Package_DIP
+SMDIP-40_W15.24mm
+40-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+40
+40
+Package_DIP
+SMDIP-40_W25.24mm
+40-lead surface-mounted (SMD) DIP package, row spacing 25.24mm (993 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 25.24mm 993mil
+0
+40
+40
+Package_DIP
+SMDIP-42_W15.24mm
+42-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+42
+42
+Package_DIP
+SMDIP-48_W15.24mm
+48-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+48
+48
+Package_DIP
+SMDIP-64_W15.24mm
+64-lead surface-mounted (SMD) DIP package, row spacing 15.24mm (600 mils)
+SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil
+0
+64
+64
+Package_DIP
+Toshiba_11-7A9
+Toshiba 11-7A9 package, like 6-lead dip package with missing pin 5, row spacing 7.62 mm (300 mils), https://toshiba.semicon-storage.com/info/docget.jsp?did=1421&prodName=TLP3021(S)
+Toshiba 11-7A9 DIL DIP PDIP 2.54mm 7.62mm 300mil
+0
+5
+5
+Package_DIP
+Vishay_HVM-DIP-3_W7.62mm
+3-lead though-hole mounted high-volatge DIP package (based on standard DIP-4), row spacing 7.62 mm (300 mils), see https://www.vishay.com/docs/91361/hexdip.pdf
+THT DIP DIL PDIP 2.54mm 7.62mm 300mil Vishay HVMDIP HEXDIP
+0
+4
+3
+Package_DirectFET
+DirectFET_L4
+DirectFET L4 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=41
+DirectFET L4 MOSFET Infineon
+0
+11
+3
+Package_DirectFET
+DirectFET_L6
+DirectFET L6 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=42
+DirectFET L6 MOSFET Infineon
+0
+13
+3
+Package_DirectFET
+DirectFET_L8
+DirectFET L8 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=43
+DirectFET L8 MOSFET Infineon
+0
+15
+3
+Package_DirectFET
+DirectFET_LA
+DirectFET LA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=44
+DirectFET LA MOSFET Infineon
+0
+15
+3
+Package_DirectFET
+DirectFET_M2
+DirectFET M2 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=33
+DirectFET M2 MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_M4
+DirectFET M4 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=34
+DirectFET M4 MOSFET Infineon
+0
+9
+3
+Package_DirectFET
+DirectFET_MA
+DirectFET MA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=35
+DirectFET MA MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_MB
+DirectFET MB https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=36
+DirectFET MB MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_MC
+DirectFET MC https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=37
+DirectFET MC MOSFET Infineon
+0
+10
+3
+Package_DirectFET
+DirectFET_MD
+DirectFET MD https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=38
+DirectFET MD MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_ME
+DirectFET ME https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=39
+DirectFET ME MOSFET Infineon
+0
+10
+3
+Package_DirectFET
+DirectFET_MF
+DirectFET MF https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=40
+DirectFET MF MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_MN
+DirectFET MN https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=30
+DirectFET MN MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MP
+DirectFET MP https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=28
+DirectFET MP MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MQ
+DirectFET MQ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=29
+DirectFET MQ MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MT
+DirectFET MT https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=26
+DirectFET MT MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MU
+DirectFET MU https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=32
+DirectFET MU MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MX
+DirectFET MX https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=27
+DirectFET MX MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_MZ
+DirectFET MZ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=31
+DirectFET MZ MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_S1
+DirectFET S1 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=20
+DirectFET S1 MOSFET Infineon
+0
+6
+3
+Package_DirectFET
+DirectFET_S2
+DirectFET S2 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=21
+DirectFET S2 MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_S3C
+DirectFET S3C https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=25
+DirectFET S3C MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_SA
+DirectFET SA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=22
+DirectFET SA MOSFET Infineon
+0
+8
+3
+Package_DirectFET
+DirectFET_SB
+DirectFET SB https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=23
+DirectFET SB MOSFET Infineon
+0
+6
+3
+Package_DirectFET
+DirectFET_SC
+DirectFET SC https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=24
+DirectFET SC MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_SH
+DirectFET SH https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=19
+DirectFET SH MOSFET Infineon
+0
+6
+3
+Package_DirectFET
+DirectFET_SJ
+DirectFET SJ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=18
+DirectFET SJ MOSFET Infineon
+0
+7
+3
+Package_DirectFET
+DirectFET_SQ
+DirectFET SQ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=17
+DirectFET SQ MOSFET Infineon
+0
+6
+3
+Package_DirectFET
+DirectFET_ST
+DirectFET ST https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=16
+DirectFET ST MOSFET Infineon
+0
+7
+3
+Package_LCC
+Analog_LCC-8_5x5mm_P1.27mm
+LCC, ceramic leaded chip carrier, 8 pins, surface mount, Analog Devices LS8, 5x5mm, height 1.45mm, https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6655-6655ln.pdf
+lcc smt
+0
+8
+8
+Package_LCC
+MO047AD_PLCC-52_19.1x19.1mm_P1.27mm
+MO047AD PLCC, 52 Pin (JEDEC MO-047 variation AD, https://www.jedec.org/document_search?search_api_views_fulltext=MO-047, https://archive.org/details/bitsavers_signeticsdcsMicroprocessor_53987793/page/n775/mode/1up?view=theater), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py
+PLCC LCC
+0
+52
+52
+Package_LCC
+PLCC-20
+PLCC, 20 pins, surface mount
+plcc smt
+0
+20
+20
+Package_LCC
+PLCC-20_SMD-Socket
+PLCC, 20 pins, surface mount
+plcc smt
+0
+20
+20
+Package_LCC
+PLCC-20_THT-Socket
+PLCC, 20 pins, through hole
+plcc leaded
+0
+20
+20
+Package_LCC
+PLCC-28
+PLCC, 28 pins, surface mount
+plcc smt
+0
+28
+28
+Package_LCC
+PLCC-28_SMD-Socket
+PLCC, 28 pins, surface mount
+plcc smt
+0
+28
+28
+Package_LCC
+PLCC-28_THT-Socket
+PLCC, 28 pins, through hole
+plcc leaded
+0
+28
+28
+Package_LCC
+PLCC-32_11.4x14.0mm_P1.27mm
+PLCC, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc0015.pdf), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py
+PLCC LCC
+0
+32
+32
+Package_LCC
+PLCC-32_THT-Socket
+PLCC, 32 pins, through hole, http://www.assmann-wsw.com/fileadmin/datasheets/ASS_0981_CO.pdf
+plcc leaded
+0
+32
+32
+Package_LCC
+PLCC-44
+PLCC, 44 pins, surface mount
+plcc smt
+0
+44
+44
+Package_LCC
+PLCC-44_16.6x16.6mm_P1.27mm
+PLCC, 44 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py
+PLCC LCC
+0
+44
+44
+Package_LCC
+PLCC-44_SMD-Socket
+PLCC, 44 pins, surface mount
+plcc smt
+0
+44
+44
+Package_LCC
+PLCC-44_THT-Socket
+PLCC, 44 pins, through hole
+plcc leaded
+0
+44
+44
+Package_LCC
+PLCC-52
+PLCC, 52 pins, surface mount
+plcc smt
+0
+52
+52
+Package_LCC
+PLCC-52_SMD-Socket
+PLCC, 52 pins, surface mount
+plcc smt
+0
+52
+52
+Package_LCC
+PLCC-52_THT-Socket
+PLCC, 52 pins, through hole
+plcc leaded
+0
+52
+52
+Package_LCC
+PLCC-68
+PLCC, 68 pins, surface mount
+plcc smt
+0
+68
+68
+Package_LCC
+PLCC-68_24.2x24.2mm_P1.27mm
+PLCC, 68 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py
+PLCC LCC
+0
+68
+68
+Package_LCC
+PLCC-68_SMD-Socket
+PLCC, 68 pins, surface mount
+plcc smt
+0
+68
+68
+Package_LCC
+PLCC-68_THT-Socket
+PLCC, 68 pins, through hole
+plcc leaded
+0
+68
+68
+Package_LCC
+PLCC-84
+PLCC, 84 pins, surface mount
+plcc smt
+0
+84
+84
+Package_LCC
+PLCC-84_29.3x29.3mm_P1.27mm
+PLCC, 84 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py
+PLCC LCC
+0
+84
+84
+Package_LCC
+PLCC-84_SMD-Socket
+PLCC, 84 pins, surface mount
+plcc smt
+0
+84
+84
+Package_LCC
+PLCC-84_THT-Socket
+PLCC, 84 pins, through hole
+plcc leaded
+0
+84
+84
+Package_LGA
+AMS_LGA-10-1EP_2.7x4mm_P0.6mm
+LGA-10, http://ams.com/eng/content/download/951091/2269479/471718
+lga land grid array
+0
+13
+11
+Package_LGA
+AMS_LGA-20_4.7x4.5mm_P0.65mm
+http://ams.com/eng/content/download/1008631/2361759/498838
+AMS LGA
+0
+20
+20
+Package_LGA
+AMS_OLGA-8_2x3.1mm_P0.8mm
+AMS  OLGA, 8 Pin (https://ams.com/documents/20143/36005/AS7341_DS000504_3-00.pdf/#page=63)
+AMS OLGA NoLead
+0
+8
+8
+Package_LGA
+Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering
+LGA-8
+lga land grid array
+0
+8
+8
+Package_LGA
+Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering
+LGA-8, https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-18.pdf
+lga land grid array
+0
+8
+8
+Package_LGA
+Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering
+Bosch  LGA, 8 Pin (https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py
+Bosch LGA NoLead
+0
+8
+8
+Package_LGA
+Bosch_LGA-14_3x2.5mm_P0.5mm
+LGA-14 Bosch https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMI160-DS000-07.pdf
+lga land grid array
+0
+14
+14
+Package_LGA
+Infineon_PG-TSNP-6-10_0.7x1.1mm_0.7x1.1mm_P0.4mm
+6 lead, 1.1x0.7mm body, 0.37mm height, TSNP (https://www.infineon.com/cms/en/product/packages/PG-TSNP/PG-TSNP-6-10/)
+PG-TSNP-6-10 TSNP
+0
+12
+6
+Package_LGA
+Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4y
+Kionix  LGA, 12 Pin (http://kionixfs.kionix.com/en/document/TN008-PCB-Design-Guidelines-for-2x2-LGA-Sensors.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py
+Kionix LGA NoLead
+0
+12
+12
+Package_LGA
+LGA-8_3x5mm_P1.25mm
+LGA-8
+lga land grid array
+0
+8
+8
+Package_LGA
+LGA-8_8x6.2mm_P1.27mm
+LGA, 8 Pin (https://datasheet.lcsc.com/lcsc/2303241700_Zetta-ZDSD64GLGEAG-R_C5277948.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+8
+8
+Package_LGA
+LGA-8_8x6mm_P1.27mm
+LGA, 8 Pin (https://datasheet.lcsc.com/lcsc/2005251034_XTX-XTSD01GLGEAG_C558837.pdf#page=6), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+8
+8
+Package_LGA
+LGA-12_2x2mm_P0.5mm
+LGA12
+lga land grid array
+0
+12
+12
+Package_LGA
+LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y
+LGA, 14 Pin (http://www.st.com/resource/en/datasheet/lis2dh.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+14
+14
+Package_LGA
+LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y
+LGA, 14 Pin (https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+14
+14
+Package_LGA
+LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y
+LGA, 14 Pin (http://www.st.com/resource/en/datasheet/lsm303dlhc.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+14
+14
+Package_LGA
+LGA-16_3x3mm_P0.5mm
+http://www.memsic.com/userfiles/files/DataSheets/Magnetic-Sensors-Datasheets/MMC5883MA-RevC.pdf
+lga land grid array
+0
+16
+16
+Package_LGA
+LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y
+LGA, 16 Pin (http://www.st.com/resource/en/datasheet/lis331hh.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+16
+16
+Package_LGA
+LGA-16_4x4mm_P0.65mm_LayoutBorder4x4y
+LGA, 16 Pin (http://www.st.com/resource/en/datasheet/l3gd20.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+LGA NoLead
+0
+16
+16
+Package_LGA
+LGA-24L_3x3.5mm_P0.43mm
+LGA 24L 3x3.5mm Pitch 0.43mm
+LGA 24L 3x3.5mm Pitch 0.43mm
+0
+24
+24
+Package_LGA
+LGA-28_5.2x3.8mm_P0.5mm
+LGA 28 5.2x3.8mm Pitch 0.5mm
+LGA 28 5.2x3.8mm Pitch 0.5mm
+0
+28
+28
+Package_LGA
+Linear_LGA-133_15.0x15.0mm_Layout12x12_P1.27mm
+Analog Devices (Linear Tech), 133-pin LGA uModule, 15.0x15.0x4.32mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf
+133 pin lga
+0
+133
+133
+Package_LGA
+MPS_LGA-18-10EP_12x12mm_P3.3mm
+MPS LGA-18 12x12x3.82mm (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MPM3550EGLE/document_id/5102/)
+MPS LGA
+0
+18
+18
+Package_LGA
+NXP_LGA-8_3x5mm_P1.25mm_H1.1mm
+NXP  LGA, 8 Pin (https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py
+NXP LGA NoLead
+0
+8
+8
+Package_LGA
+NXP_LGA-8_3x5mm_P1.25mm_H1.2mm
+NXP  LGA, 8 Pin (https://www.nxp.com/docs/en/data-sheet/MPL115A1.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+NXP LGA NoLead
+0
+8
+8
+Package_LGA
+Nordic_nRF9160-SIxx_LGA-102-59EP_16.0x10.5mm_P0.5mm
+nRF9160 (https://docs.nordicsemi.com/bundle/ps_nrf9160/page/mec_spec.html)
+Nordic LGA
+0
+161
+127
+Package_LGA
+Rohm_MLGA010V020A_LGA-10_2x2mm_P0.45mm_LayoutBorder2x3y
+Rohm  LGA, 10 Pin (https://fscdn.rohm.com/en/techdata_basic/ic/package/Jisso_MLGA010V020A-1-2_Rev005s_E2(MSL3).pdf)
+Rohm LGA NoLead
+0
+10
+10
+Package_LGA
+ST_CCLGA-7L_2.8x2.8mm_P1.15mm_H1.95mm
+ST  CCLGA, 7 Pin (https://www.st.com/resource/en/datasheet/ilps28qsw.pdf#page=44)
+water resistant package
+0
+7
+7
+Package_LGA
+ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y
+ST  HLGA, 10 Pin (https://www.st.com/resource/en/datasheet/lps25hb.pdf#page=46), generated with kicad-footprint-generator ipc_noLead_generator.py
+ST HLGA NoLead
+0
+10
+10
+Package_LGA
+ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y
+ST  HLGA, 10 Pin (https://www.st.com/resource/en/datasheet/lps22hh.pdf#page=55), generated with kicad-footprint-generator ipc_noLead_generator.py
+ST HLGA NoLead
+0
+10
+10
+Package_LGA
+Texas_SIL0008C_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm
+Texas SIL0008C MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82085.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+11
+9
+Package_LGA
+Texas_SIL0008C_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias
+Texas SIL0008C MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82085.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+15
+9
+Package_LGA
+Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm
+Texas SIL0008D MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+12
+9
+Package_LGA
+Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias
+Texas SIL0008D MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+16
+9
+Package_LGA
+Texas_SIL0010A_MicroSiP-10-1EP_3.8x3mm_P0.6mm_EP0.7x2.9mm
+Texas SIL0010A MicroSiP, 10 Pin (http://www.ti.com/lit/ml/mpds579b/mpds579b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+14
+11
+Package_LGA
+Texas_SIL0010A_MicroSiP-10-1EP_3.8x3mm_P0.6mm_EP0.7x2.9mm_ThermalVias
+Texas SIL0010A MicroSiP, 10 Pin (http://www.ti.com/lit/ml/mpds579b/mpds579b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas MicroSiP NoLead
+0
+18
+11
+Package_LGA
+VLGA-4_2x2.5mm_P1.65mm
+VLGA, 4 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/DSC60XX-Ultra-Small-Ultra-Low-Power-MEMS-Oscillator-DS20005625C.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+VLGA NoLead
+0
+4
+4
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP4x4mm
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00482-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+154
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP4x4mm_ThermalVias
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00482-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+164
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP5x5mm
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00476-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+161
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP5x5mm_ThermalVias
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00476-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+178
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP6.61x5.615mm
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00485-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+165
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP6.61x5.615mm_ThermalVias
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00485-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+186
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP7.2x6.35mm
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00487-01.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+175
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP7.2x6.35mm_ThermalVias
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00487-01.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+206
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP8.93x8.7mm
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00479-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+194
+145
+Package_QFP
+EQFP-144-1EP_20x20mm_P0.5mm_EP8.93x8.7mm_ThermalVias
+EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00479-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+EQFP QFP
+0
+244
+145
+Package_QFP
+HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm
+64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [HTQFP] thermal pad
+HTQFP-64 Pitch 0.5 
+0
+69
+65
+Package_QFP
+HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.4x4.4mm_ThermalVias
+64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [HTQFP] thermal pad
+HTQFP-64 Pitch 0.5 
+0
+135
+65
+Package_QFP
+LQFP-32_5x5mm_P0.5mm
+LQFP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT401-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+32
+32
+Package_QFP
+LQFP-32_7x7mm_P0.8mm
+LQFP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT358-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+32
+32
+Package_QFP
+LQFP-36_7x7mm_P0.65mm
+LQFP, 36 Pin (https://www.onsemi.com/pub/Collateral/561AV.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+36
+36
+Package_QFP
+LQFP-44_10x10mm_P0.8mm
+LQFP, 44 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ASS23225W.pdf?&fsrch=1), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+44
+44
+Package_QFP
+LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm
+LQFP, 48 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+58
+49
+Package_QFP
+LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm_ThermalVias
+LQFP, 48 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+68
+49
+Package_QFP
+LQFP-48_7x7mm_P0.5mm
+LQFP, 48 Pin (JEDEC MS-026 variation BBC, 1.40mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfp/05081760_a_lx48.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP CASE-932AA CASE-932-03 C48-1 C48-2 C48-3 C48-5 C48-6 C48-6C PT0048A
+0
+48
+48
+Package_QFP
+LQFP-52-1EP_10x10mm_P0.65mm_EP4.8x4.8mm
+LQFP, 52 Pin (https://www.onsemi.com/pub/Collateral/848H-01.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+62
+53
+Package_QFP
+LQFP-52-1EP_10x10mm_P0.65mm_EP4.8x4.8mm_ThermalVias
+LQFP, 52 Pin (https://www.onsemi.com/pub/Collateral/848H-01.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+79
+53
+Package_QFP
+LQFP-52_10x10mm_P0.65mm
+LQFP, 52 Pin (https://www.nxp.com/docs/en/package-information/98ARL10526D.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+52
+52
+Package_QFP
+LQFP-52_14x14mm_P1mm
+LQFP, 52 Pin (http://www.holtek.com/documents/10179/116711/HT1632Cv170.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+52
+52
+Package_QFP
+LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm
+LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/adv7611.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+90
+65
+Package_QFP
+LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm_ThermalVias
+LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/adv7611.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+107
+65
+Package_QFP
+LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm
+LQFP, 64 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ARH98426A.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+90
+65
+Package_QFP
+LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm_ThermalVias
+LQFP, 64 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ARH98426A.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+116
+65
+Package_QFP
+LQFP-64_7x7mm_P0.4mm
+LQFP, 64 Pin (https://www.nxp.com/docs/en/package-information/SOT414-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+64
+64
+Package_QFP
+LQFP-64_10x10mm_P0.5mm
+LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+64
+64
+Package_QFP
+LQFP-64_14x14mm_P0.8mm
+LQFP, 64 Pin (https://www.nxp.com/docs/en/package-information/SOT791-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+64
+64
+Package_QFP
+LQFP-80_10x10mm_P0.4mm
+LQFP, 80 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/q80.10x10.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+80
+80
+Package_QFP
+LQFP-80_12x12mm_P0.5mm
+LQFP, 80 Pin (https://www.nxp.com/docs/en/package-information/SOT315-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+80
+80
+Package_QFP
+LQFP-80_14x14mm_P0.65mm
+LQFP, 80 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+80
+80
+Package_QFP
+LQFP-100_14x14mm_P0.5mm
+LQFP, 100 Pin (https://www.nxp.com/docs/en/package-information/SOT407-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+100
+100
+Package_QFP
+LQFP-128_14x14mm_P0.4mm
+LQFP, 128 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/q128.14x14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+128
+128
+Package_QFP
+LQFP-128_14x20mm_P0.5mm
+LQFP, 128 Pin (https://www.nxp.com/docs/en/package-information/SOT425-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+128
+128
+Package_QFP
+LQFP-144-1EP_20x20mm_P0.5mm_EP6.5x6.5mm
+LQFP, 144 Pin (https://www.infineon.com/dgdl/Infineon-XMC4500-DS-v01_05-EN.pdf?fileId=5546d46254e133b40154e1b56cbe0123), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP Infineon-PG-LQFP-144-24 Infineon-PG-LQFP-144-26
+0
+154
+145
+Package_QFP
+LQFP-144-1EP_20x20mm_P0.5mm_EP6.5x6.5mm_ThermalVias
+LQFP, 144 Pin (https://www.infineon.com/dgdl/Infineon-XMC4500-DS-v01_05-EN.pdf?fileId=5546d46254e133b40154e1b56cbe0123), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP Infineon-PG-LQFP-144-24 Infineon-PG-LQFP-144-26
+0
+171
+145
+Package_QFP
+LQFP-144_20x20mm_P0.5mm
+LQFP, 144 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=425), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+144
+144
+Package_QFP
+LQFP-160_24x24mm_P0.5mm
+LQFP, 160 Pin (https://www.nxp.com/docs/en/package-information/SOT435-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+160
+160
+Package_QFP
+LQFP-176-1EP_24x24mm_P0.5mm_EP6.6x6.6mm
+LQFP, 176 Pin (https://www.infineon.com/cms/en/product/packages/PG-TQFP/PG-TQFP-176-801/), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP Infineon-PG-TQFP-176-801
+0
+202
+177
+Package_QFP
+LQFP-176-1EP_24x24mm_P0.5mm_EP6.6x6.6mm_ThermalVias
+LQFP, 176 Pin (https://www.infineon.com/cms/en/product/packages/PG-TQFP/PG-TQFP-176-801/), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP Infineon-PG-TQFP-176-801
+0
+239
+177
+Package_QFP
+LQFP-176_20x20mm_P0.4mm
+LQFP, 176 Pin (https://www.onsemi.com/pub/Collateral/566DB.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+176
+176
+Package_QFP
+LQFP-176_24x24mm_P0.5mm
+LQFP, 176 Pin (https://www.st.com/resource/en/datasheet/stm32f207vg.pdf#page=163), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+176
+176
+Package_QFP
+LQFP-208_28x28mm_P0.5mm
+LQFP, 208 Pin (https://www.nxp.com/docs/en/package-information/SOT459-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+208
+208
+Package_QFP
+LQFP-216_24x24mm_P0.4mm
+LQFP, 216 Pin (https://www.onsemi.com/pub/Collateral/561BE.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+LQFP QFP
+0
+216
+216
+Package_QFP
+MO112AC1_PQFP-52_10x10mm_P0.65mm
+MO112AC1 PQFP, 52 Pin (JEDEC MO-112 variation AC-1, https://www.jedec.org/document_search?search_api_views_fulltext=MO-112, https://www.analog.com/media/en/package-pcb-resources/package/32717196300961s_52_2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP MQFP S-52-2 high-standoff
+0
+52
+52
+Package_QFP
+Microchip_PQFP-44_10x10mm_P0.8mm
+Microchip  PQFP, 44 Pin (JEDEC MO-112 variation AA-2, Microchip and Analog Devices, https://www.jedec.org/document_search?search_api_views_fulltext=MO-112, https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005418B.pdf#page=10, https://www.analog.com/media/en/technical-documentation/data-sheets/ad7722.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Microchip PQFP QFP P-QFP 44-Lead-MQFP S-44-2
+0
+44
+44
+Package_QFP
+PQFP-32_5x5mm_P0.5mm
+PQFP, 32 Pin (https://www.ti.com/lit/ds/symlink/ads127l01.pdf#page=87), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+32
+32
+Package_QFP
+PQFP-44_10x10mm_P0.8mm
+PQFP, 44 Pin (JEDEC MS-022 variation AB, https://www.jedec.org/document_search?search_api_views_fulltext=MS-022, https://ww1.microchip.com/downloads/aemDocuments/documents/package-outline-drawings/c04-21291a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP P-QFP QQZ M44-2 44L-MQFP-10x10x2mm
+0
+44
+44
+Package_QFP
+PQFP-64_14x14mm_P0.8mm
+PQFP, 64 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-qfp-64pin-prqp0064gb), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+64
+64
+Package_QFP
+PQFP-80_14x20mm_P0.8mm
+PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor 122BS.PDF)
+QFP 0.8
+0
+80
+80
+Package_QFP
+PQFP-100_14x20mm_P0.65mm
+PQFP, 100 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+100
+100
+Package_QFP
+PQFP-112_20x20mm_P0.65mm
+PQFP, 112 pins, 20mm sq body, 0.65mm pitch (http://cache.freescale.com/files/shared/doc/package_info/98ASS23330W.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf)
+PQFP 112
+0
+112
+112
+Package_QFP
+PQFP-132_24x24mm_P0.635mm
+PQFP, 132 pins, 24mm sq body, 0.635mm pitch (https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-02-databook.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf)
+PQFP 132
+0
+132
+132
+Package_QFP
+PQFP-132_24x24mm_P0.635mm_i386
+PQFP, 132 pins, 24mm sq body, 0.635mm pitch, Intel 386EX (https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-02-databook.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf)
+PQFP 132 Intel 386EX
+0
+132
+132
+Package_QFP
+PQFP-144_28x28mm_P0.65mm
+PQFP, 144 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+144
+144
+Package_QFP
+PQFP-160_28x28mm_P0.65mm
+PQFP, 160 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+160
+160
+Package_QFP
+PQFP-168_28x28mm_P0.65mm
+PQFP, 168 Pin (https://www.renesas.cn/cn/zh/document/psc/package-drawing-qfp-168pin-prqp0168jb), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+168
+168
+Package_QFP
+PQFP-208_28x28mm_P0.5mm
+PQFP, 208 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+208
+208
+Package_QFP
+PQFP-240_32.1x32.1mm_P0.5mm
+PQFP, 240 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PQFP QFP
+0
+240
+240
+Package_QFP
+PQFP-256_28x28mm_P0.4mm
+PQFP256 28x28 / QFP256J CASE 122BX (see ON Semiconductor 122BX.PDF)
+QFP 0.4
+0
+256
+256
+Package_QFP
+TQFP-32_7x7mm_P0.8mm
+TQFP, 32 Pin (JEDEC MS-026 variation ABA, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=656), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+32
+32
+Package_QFP
+TQFP-44-1EP_10x10mm_P0.8mm_EP4.5x4.5mm
+44-Lead Plastic Thin Quad Flatpack (MW) - 10x10x1.0 mm Body [TQFP] With 4.5x4.5 mm Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf)
+QFP 0.8
+0
+54
+45
+Package_QFP
+TQFP-44_10x10mm_P0.8mm
+TQFP, 44 Pin (JEDEC MS-026 variation ACB, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=658), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+44
+44
+Package_QFP
+TQFP-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm
+TQFP, 48 Pin (JEDEC MS-026 variation ABC, 1.00mm body thickness, custom Exposed Pad from Microchip and Analog Devices, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=664, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_48_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP SV-48-4
+0
+53
+49
+Package_QFP
+TQFP-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_ThermalVias
+TQFP, 48 Pin (JEDEC MS-026 variation ABC, 1.00mm body thickness, custom Exposed Pad from Microchip and Analog Devices, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=664, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_48_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP SV-48-4
+0
+63
+49
+Package_QFP
+TQFP-48-1EP_7x7mm_P0.5mm_EP4.11x4.11mm
+TQFP, 48 Pin (https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+65
+49
+Package_QFP
+TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm
+TQFP, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+65
+49
+Package_QFP
+TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias
+TQFP, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+91
+49
+Package_QFP
+TQFP-48_7x7mm_P0.5mm
+TQFP, 48 Pin (JEDEC MS-026 variation ABC, 1.00mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=666), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP P48GA-50-HAA-2 pkg_3304 PTQP0048KC-A C48-11 PFB0048A
+0
+48
+48
+Package_QFP
+TQFP-52-1EP_10x10mm_P0.65mm_EP6.5x6.5mm
+TQFP, 52 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_52_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+78
+53
+Package_QFP
+TQFP-52-1EP_10x10mm_P0.65mm_EP6.5x6.5mm_ThermalVias
+TQFP, 52 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_52_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+95
+53
+Package_QFP
+TQFP-64-1EP_10x10mm_P0.5mm_EP5.305x5.305mm
+TQFP, 64 Pin (https://www.esstech.com/wp-content/uploads/2022/09/ES9028PRO-Datasheet-v3.7.pdf#page=54), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP ESS-eTQFP-64
+0
+81
+65
+Package_QFP
+TQFP-64-1EP_10x10mm_P0.5mm_EP5.305x5.305mm_ThermalVias
+TQFP, 64 Pin (https://www.esstech.com/wp-content/uploads/2022/09/ES9028PRO-Datasheet-v3.7.pdf#page=54), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP ESS-eTQFP-64
+0
+107
+65
+Package_QFP
+TQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm
+64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [TQFP] thermal pad
+QFP 0.5 
+0
+90
+65
+Package_QFP
+TQFP-64_7x7mm_P0.4mm
+TQFP, 64 Pin (JEDEC MS-026 variation ABD, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfpsu/su_64_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP SU-64-1 CASE-932BH
+0
+64
+64
+Package_QFP
+TQFP-64_10x10mm_P0.5mm
+TQFP, 64 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+64
+64
+Package_QFP
+TQFP-64_14x14mm_P0.8mm
+TQFP, 64 Pin (JEDEC MS-026 variation AEB, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=672), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+64
+64
+Package_QFP
+TQFP-80-1EP_14x14mm_P0.65mm_EP9.5x9.5mm
+80-Lead Plastic Thin Quad Flatpack (PF) - 14x14mm body, 9.5mm sq thermal pad (http://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf)
+QFP 0.65
+0
+85
+81
+Package_QFP
+TQFP-80_12x12mm_P0.5mm
+80-Lead Plastic Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)
+QFP 0.5
+0
+80
+80
+Package_QFP
+TQFP-80_14x14mm_P0.65mm
+80-Lead Plastic Thin Quad Flatpack (PF) - 14x14x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)
+QFP 0.65
+0
+80
+80
+Package_QFP
+TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm
+TQFP, 100 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_100_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+117
+101
+Package_QFP
+TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm_ThermalVias
+TQFP, 100 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_100_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+143
+101
+Package_QFP
+TQFP-100_12x12mm_P0.4mm
+TQFP, 100 Pin (JEDEC MS-026 variation ADE, 1.00mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=685), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP S100GK-40-9EV-1 pkg_8212 PTQP0100LD-A
+0
+100
+100
+Package_QFP
+TQFP-100_14x14mm_P0.5mm
+TQFP, 100 Pin (JEDEC MS-026 variation AED, 1.00mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=683), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP VQ100 CASE-932AN 983B-01 SOT386-1 C100-1
+0
+100
+100
+Package_QFP
+TQFP-120_14x14mm_P0.4mm
+TQFP120 14x14 / TQFP120 CASE 932AZ (see ON Semiconductor 932AZ.PDF)
+QFP 0.4
+0
+120
+120
+Package_QFP
+TQFP-128_14x14mm_P0.4mm
+TQFP128 14x14 / TQFP128 CASE 932BB (see ON Semiconductor 932BB.PDF)
+QFP 0.4
+0
+128
+128
+Package_QFP
+TQFP-144_16x16mm_P0.4mm
+144-Lead Plastic Thin Quad Flatpack (PH) - 16x16x1 mm Body, 2.00 mm Footprint [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)
+QFP 0.4
+0
+144
+144
+Package_QFP
+TQFP-144_20x20mm_P0.5mm
+TQFP, 144 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+144
+144
+Package_QFP
+TQFP-176_24x24mm_P0.5mm
+TQFP, 176 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TQFP QFP
+0
+176
+176
+Package_QFP
+Texas_PHP0048E_HTQFP-48-1EP_7x7mm_P0.5mm_EP6.5x6.5mm_Mask3.62x3.62mm
+Texas PHP0048E HTQFP, 48 Pin (https://www.ti.com/lit/ds/symlink/tusb4020bi.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas HTQFP QFP
+0
+51
+49
+Package_QFP
+Texas_PHP0048E_HTQFP-48-1EP_7x7mm_P0.5mm_EP6.5x6.5mm_Mask3.62x3.62mm_ThermalVias
+Texas PHP0048E HTQFP, 48 Pin (https://www.ti.com/lit/ds/symlink/tusb4020bi.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas HTQFP QFP
+0
+88
+49
+Package_QFP
+VQFP-80_14x14mm_P0.65mm
+VQFP, 80 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VQFP QFP
+0
+80
+80
+Package_QFP
+VQFP-128_14x14mm_P0.4mm
+VQFP, 128 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VQFP QFP
+0
+128
+128
+Package_QFP
+VQFP-176_20x20mm_P0.4mm
+VQFP, 176 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VQFP QFP
+0
+176
+176
+Package_SIP
+PowerIntegrations_eSIP-7C
+eSIP-7C Vertical Flat Package with Heatsink Tab, https://ac-dc.power.com/sites/default/files/product-docs/topswitch-jx_family_datasheet.pdf
+Power Integrations E Package
+0
+6
+6
+Package_SIP
+PowerIntegrations_eSIP-7F
+eSIP-7F Flat Package with Heatsink Tab https://ac-dc.power.com/sites/default/files/product-docs/linkswitch-ph_family_datasheet.pdf
+Power Integrations L Package
+0
+6
+6
+Package_SIP
+SIP-8_19x3mm_P2.54mm
+SIP 8-pin (http://www.njr.com/semicon/PDF/package/SIP8_E.pdf)
+SIP8
+0
+8
+8
+Package_SIP
+SIP-9_21.54x3mm_P2.54mm
+SIP 9-pin ()
+SIP8
+0
+9
+9
+Package_SIP
+SIP-9_22.3x3mm_P2.54mm
+SIP 9-pin ()
+SIP8
+0
+9
+9
+Package_SIP
+SIP3_11.6x8.5mm
+RECOM,R78EXX,https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf
+SIP3 Regulator Module
+0
+3
+3
+Package_SIP
+SIP4_Sharp-SSR_P7.62mm_Angled
+SIP4 Footprint for SSR made by Sharp
+Solid State relais SSR Sharp
+0
+4
+4
+Package_SIP
+SIP4_Sharp-SSR_P7.62mm_Angled_NoHole
+SIP4 Footprint for SSR made by Sharp
+Solid State relais SSR Sharp
+0
+4
+4
+Package_SIP
+SIP4_Sharp-SSR_P7.62mm_Straight
+SIP4 Footprint for SSR made by Sharp
+Solid State relais SSR Sharp
+0
+4
+4
+Package_SIP
+SIP9_Housing
+SIP9
+SIP9
+0
+9
+9
+Package_SIP
+SIP9_Housing_BigPads
+SIP9, large pads
+SIP9
+0
+9
+9
+Package_SIP
+SLA704XM
+SIP SLA704XM (http://www.sumzi.com/upload/files/2007/07/2007073114282034189.PDF)
+SIP
+0
+18
+18
+Package_SIP
+STK672-040-E
+SIP-22 (http://www.onsemi.com/pub_link/Collateral/EN5227-D.PDF)
+SIP-22
+0
+22
+22
+Package_SIP
+STK672-080-E
+SIP-15 (http://www.onsemi.com/pub_link/Collateral/EN6507-D.PDF)
+SIP-15
+0
+15
+15
+Package_SIP
+Sanyo_STK4xx-15_59.2x8.0mm_P2.54mm
+Sanyo SIP-15, 59.2mm x 8.0mm bosy size, STK-433E STK-435E STK-436E (http://datasheet.octopart.com/STK430-Sanyo-datasheet-107060.pdf)
+Sanyo SIP-15
+0
+15
+15
+Package_SIP
+Sanyo_STK4xx-15_78.0x8.0mm_P2.54mm
+Sanyo SIP-15, 78.0mm x 8.0mm bosy size, STK-437E STK-439E STK-441E STK-443E (http://datasheet.octopart.com/STK430-Sanyo-datasheet-107060.pdf)
+Sanyo SIP-15
+0
+15
+15
+Package_SO
+Analog_MSOP-12-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
+Analog  MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081871_d_mse16(12).pdf https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Analog MSOP SO MSE16-(12) Linear-Technology
+0
+17
+13
+Package_SO
+Analog_MSOP-12-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_ThermalVias
+Analog  MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081871_d_mse16(12).pdf https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Analog MSOP SO MSE16-(12) Linear-Technology
+0
+24
+13
+Package_SO
+Analog_MSOP-12-16_3x4.039mm_P0.5mm
+Analog  MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081847_b_ms16(12).pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Analog MSOP SO MS16-(12) Linear-Technology
+0
+12
+12
+Package_SO
+Diodes_PSOP-8
+8-Lead Plastic PSOP, Exposed Die Pad (see https://www.diodes.com/assets/Datasheets/AP2204.pdf)
+SSOP 0.50 exposed pad
+0
+12
+9
+Package_SO
+Diodes_SO-8EP
+8-Lead Plastic SO, Exposed Die Pad (see https://www.diodes.com/assets/Package-Files/SO-8EP.pdf)
+SO exposed pad
+0
+9
+9
+Package_SO
+ETSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3x4.2mm
+20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body with Exposed Pad [eTSSOP] (see Microchip Packaging Specification 00000049BS.pdf)
+SSOP 0.65
+0
+27
+21
+Package_SO
+HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm
+HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l7980.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+13
+9
+Package_SO
+HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm_ThermalVias
+HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l7980.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+18
+9
+Package_SO
+HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm
+HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l5973d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+13
+9
+Package_SO
+HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias
+HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l5973d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+20
+9
+Package_SO
+HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown
+HSOP 11.0x15.9mm Pitch 1.27mm Slug Down (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 1.27mm
+0
+23
+21
+Package_SO
+HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown_ThermalVias
+HSOP 11.0x15.9mm Pitch 1.27mm Slug Down Thermal Vias (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 1.27mm
+0
+45
+21
+Package_SO
+HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugUp
+HSOP 11.0x15.9mm Pitch 1.27mm Slug Up (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 1.27mm
+0
+20
+20
+Package_SO
+HSOP-32-1EP_7.5x11mm_P0.65mm_EP4.7x4.7mm
+HSOP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT1746-3.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+37
+33
+Package_SO
+HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugDown
+HSOP 11.0x15.9mm Pitch 0.65mm Slug Down (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 0.65mm
+0
+39
+37
+Package_SO
+HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugDown_ThermalVias
+HSOP 11.0x15.9mm Pitch 0.65mm Slug Down Thermal Vias (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 0.65mm
+0
+61
+37
+Package_SO
+HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugUp
+HSOP 11.0x15.9mm Pitch 0.65mm Slug Up (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf)
+HSOP 11.0 x 15.9mm Pitch 0.65mm
+0
+36
+36
+Package_SO
+HSOP-54-1EP_7.5x17.9mm_P0.65mm_EP4.6x4.6mm
+HSOP, 54 Pin (https://www.nxp.com/docs/en/package-information/98ASA10506D.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOP SO
+0
+59
+55
+Package_SO
+HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm
+HTSOP, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSOP SO
+0
+13
+9
+Package_SO
+HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm_ThermalVias
+HTSOP, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSOP SO
+0
+20
+9
+Package_SO
+HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm
+HTSSOP, 14 Pin (http://www.ti.com/lit/ds/symlink/lm5161.pdf#page=34), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0014A
+0
+20
+15
+Package_SO
+HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm_ThermalVias
+HTSSOP, 14 Pin (http://www.ti.com/lit/ds/symlink/lm5161.pdf#page=34), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0014A
+0
+36
+15
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm
+16-Lead Plastic HTSSOP (4.4x5x1.2mm); Thermal pad; (http://www.ti.com/lit/ds/symlink/drv8833.pdf)
+SSOP 0.65
+0
+29
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm
+HTSSOP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+20
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias
+HTSSOP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+27
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm
+HTSSOP, 16 Pin (http://www.ti.com/lit/ds/symlink/tps2660.pdf#page=48), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0016H
+0
+20
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm_ThermalVias
+HTSSOP, 16 Pin (http://www.ti.com/lit/ds/symlink/tps2660.pdf#page=48), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0016H
+0
+33
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias
+16-Lead Plastic HTSSOP (4.4x5x1.2mm); Thermal pad with vias; (http://www.ti.com/lit/ds/symlink/drv8800.pdf)
+SSOP 0.65
+0
+46
+17
+Package_SO
+HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm
+HTSSOP, 16 Pin (https://www.st.com/resource/en/datasheet/stp08cp05.pdf#page=20), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+21
+17
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.74x3.86mm
+HTSSOP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4011fb.pdf#page=24), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO Analog-FE-CB
+0
+23
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.85x4mm
+HTSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO Maxim-U20E-1
+0
+23
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm
+20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [HTSSOP], with thermal pad with vias
+HTSSOP 0.65
+0
+29
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.4x3.7mm
+HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/bq24006.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP/R-PDSO-G20
+0
+24
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm
+HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0020U
+0
+26
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias
+HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0020U
+0
+42
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm
+HTSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/tps2663.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0020T
+0
+23
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm_ThermalVias
+HTSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/tps2663.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0020T
+0
+42
+21
+Package_SO
+HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_ThermalVias
+20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [HTSSOP], with thermal pad with vias
+HTSSOP 0.65
+0
+45
+21
+Package_SO
+HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm
+HTSSOP, 24 Pin (https://www.st.com/resource/en/datasheet/stp16cp05.pdf#page=25), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+31
+25
+Package_SO
+HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x2.98mm
+HTSSOP, 24 Pin (https://www.ti.com/lit/ds/symlink/tlc5949.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0024P
+0
+27
+25
+Package_SO
+HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x2.98mm_ThermalVias
+HTSSOP, 24 Pin (https://www.ti.com/lit/ds/symlink/tlc5949.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP0024P
+0
+49
+25
+Package_SO
+HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm
+HTSSOP, 24 Pin (http://www.ti.com/lit/ds/symlink/tps703.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP/R-PDSO-G24
+0
+28
+25
+Package_SO
+HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias
+HTSSOP, 24 Pin (http://www.ti.com/lit/ds/symlink/tps703.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-PWP/R-PDSO-G24
+0
+47
+25
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm
+HTSSOP, 28 Pin (https://www.trinamic.com/fileadmin/assets/Support/AppNotes/AN005x-IC_Package_PCB_Footprint_Guidelines_HTSSOP28_rev1.00.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+30
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm_ThermalVias
+HTSSOP, 28 Pin (https://www.trinamic.com/fileadmin/assets/Support/AppNotes/AN005x-IC_Package_PCB_Footprint_Guidelines_HTSSOP28_rev1.00.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+41
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm
+HTSSOP, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+30
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm_ThermalVias
+HTSSOP, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+41
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm
+HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad
+TSSOP HTSSOP 0.65 thermal pad
+0
+39
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm
+HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad
+TSSOP HTSSOP 0.65 thermal pad
+0
+40
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm_ThermalVias
+HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad
+TSSOP HTSSOP 0.65 thermal pad
+0
+55
+29
+Package_SO
+HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_ThermalVias
+HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad
+TSSOP HTSSOP 0.65 thermal pad
+0
+58
+29
+Package_SO
+HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm
+HTSSOP32: plastic thin shrink small outline package; 32 leads; body width 6.1 mm; lead pitch 0.65 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf)
+SSOP 0.65 PowerPAD
+0
+43
+33
+Package_SO
+HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias
+HTSSOP32: plastic thin shrink small outline package; 32 leads; body width 6.1 mm; lead pitch 0.65 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf)
+SSOP 0.65 PowerPAD
+0
+83
+33
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP1.5x3.3mm
+HTSSOP, 38 Pin (JEDEC MO-153 Var BDT-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+41
+39
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP1.5x3.3mm_ThermalVias
+HTSSOP, 38 Pin (JEDEC MO-153 Var BDT-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+51
+39
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP2.74x4.75mm
+HTSSOP, 38 Pin (JEDEC MO-153 Var BDT-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153 https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-tssop/tssop_38_05-08-1865.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+45
+39
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP2.74x4.75mm_ThermalVias
+HTSSOP, 38 Pin (JEDEC MO-153 Var BDT-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153 https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-tssop/tssop_38_05-08-1865.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO
+0
+61
+39
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP3.05x6.65mm
+HTSSOP, 38 Pin (JEDEC MO-153 variation BDT-1 (with exposed pad size from Maxim / Analog Devices), https://www.jedec.org/document_search?search_api_views_fulltext=MO-153, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tssop-exp/21-0714.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO U38E-3C
+0
+47
+39
+Package_SO
+HTSSOP-38-1EP_4.4x9.7mm_P0.5mm_EP3.05x6.65mm_ThermalVias
+HTSSOP, 38 Pin (JEDEC MO-153 variation BDT-1 (with exposed pad size from Maxim / Analog Devices), https://www.jedec.org/document_search?search_api_views_fulltext=MO-153, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tssop-exp/21-0714.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO U38E-3C
+0
+69
+39
+Package_SO
+HTSSOP-38-1EP_6.1x12.5mm_P0.65mm_EP5.2x12.5mm_Mask3.39x6.35mm
+HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=46), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-DAP/R-PDSO-G38
+0
+46
+39
+Package_SO
+HTSSOP-38-1EP_6.1x12.5mm_P0.65mm_EP5.2x12.5mm_Mask3.39x6.35mm_ThermalVias
+HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=46), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-DAP/R-PDSO-G38
+0
+87
+39
+Package_SO
+HTSSOP-44-1EP_6.1x14mm_P0.635mm_EP5.2x14mm_Mask4.31x8.26mm
+HTSSOP, 44 Pin (http://www.ti.com/lit/pdf/pptd165), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-DDW0044B
+0
+61
+45
+Package_SO
+HTSSOP-44-1EP_6.1x14mm_P0.635mm_EP5.2x14mm_Mask4.31x8.26mm_ThermalVias
+HTSSOP, 44 Pin (http://www.ti.com/lit/pdf/pptd165), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-DDW0044B
+0
+118
+45
+Package_SO
+HTSSOP-44_6.1x14mm_P0.635mm_TopEP4.14x7.01mm
+HTSSOP, 44 Pin (http://www.ti.com/lit/ds/symlink/tpa3251.pdf#page=38), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HTSSOP SO TI-DDV0044D
+0
+44
+44
+Package_SO
+HTSSOP-56-1EP_6.1x14mm_P0.5mm_EP3.61x6.35mm
+HTSSOP56: plastic thin shrink small outline package http://www.ti.com/lit/ds/symlink/drv8301.pdf
+HTSSOP 0.5
+0
+72
+57
+Package_SO
+HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
+HVSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HVSSOP SO
+0
+13
+9
+Package_SO
+HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm_ThermalVias
+HVSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HVSSOP SO
+0
+18
+9
+Package_SO
+HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm
+HVSSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/bq24090.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HVSSOP SO
+0
+15
+11
+Package_SO
+HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalVias
+HVSSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/bq24090.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HVSSOP SO
+0
+20
+11
+Package_SO
+Infineon_PG-DSO-8-24_4x5mm
+Infineon  PG-DSO, 8 Pin (https://www.infineon.com/dgdl/Infineon-BSP752R-DS-v01_02-EN.pdf?fileId=db3a304316f112290116f233cbd271e9#page=17), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon PG-DSO SO
+0
+8
+8
+Package_SO
+Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mm
+Infineon  PG-DSO, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon PG-DSO SO
+0
+13
+9
+Package_SO
+Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mm_ThermalVias
+Infineon  PG-DSO, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon PG-DSO SO
+0
+23
+9
+Package_SO
+Infineon_PG-DSO-8-43
+Infineon_PG-DSO-8-43
+DSO DSO-8 SOIC SOIC-8
+0
+12
+9
+Package_SO
+Infineon_PG-DSO-8-59_7.5x6.3mm
+Infineon  PG-DSO, 8 Pin (https://www.infineon.com/dgdl/Infineon-1EDCxxI12AH-DS-v02_00-EN.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon PG-DSO SO
+0
+8
+8
+Package_SO
+Infineon_PG-DSO-12-9
+Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/)
+PG-DSO
+0
+23
+13
+Package_SO
+Infineon_PG-DSO-12-9_ThermalVias
+Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal vias (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/)
+PG-DSO
+0
+42
+13
+Package_SO
+Infineon_PG-DSO-12-11
+Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-11/)
+PG-DSO
+0
+23
+13
+Package_SO
+Infineon_PG-DSO-12-11_ThermalVias
+Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal vias (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-11/)
+PG-DSO
+0
+42
+13
+Package_SO
+Infineon_PG-DSO-20-30
+Infineon SO package 20pin, exposed pad 4.5x7mm (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-71/)
+DSO-20
+0
+31
+21
+Package_SO
+Infineon_PG-DSO-20-30_ThermalVias
+Infineon SO package 20pin, exposed pad 4.5x7mm (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-71/)
+DSO-20
+0
+45
+21
+Package_SO
+Infineon_PG-DSO-20-32
+Infineon SO package 20pin without exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-32/)
+DSO-20
+0
+20
+20
+Package_SO
+Infineon_PG-DSO-20-85
+Infineon SO package 20pin with exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/)
+DSO-20
+0
+31
+21
+Package_SO
+Infineon_PG-DSO-20-85_ThermalVias
+Infineon SO package 20pin with exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/)
+DSO-20
+0
+113
+21
+Package_SO
+Infineon_PG-DSO-20-87
+Infineon SO package 20pin without exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-87/)
+DSO-20
+0
+20
+20
+Package_SO
+Infineon_PG-DSO-20-U03_7.5x12.8mm
+Infineon  PG-DSO, 20 Pin (https://www.infineon.com/dgdl/Infineon-2ED1323S12P_2ED1324S12P-DataSheet-v01_01-EN.pdf?fileId=8ac78c8c869190210186e92f0f506d0c), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon PG-DSO SO
+0
+20
+20
+Package_SO
+Infineon_PG-TSDSO-14-22
+Infineon_PG-TSDSO-14-22
+Infineon TSDSO 14-22 
+0
+17
+15
+Package_SO
+Infineon_SOIC-20W_7.6x12.8mm_P1.27mm
+Infineon  SOIC, 20 Pin (https://www.infineon.com/dgdl/Infineon-PG-DSO-20-77_SPO_PDF-Package-v15_00-EN.pdf?fileId=5546d4625c54d85b015c627e1a0c23b3, https://www.infineon.com/dgdl/Infineon-PG-DSO-20-77_FPD_PDF-Footprint-v15_00-EN.pdf?fileId=5546d4625c54d85b015c5f0f49614324), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Infineon SOIC SO PG-DSO-20 PG-DSO-20-6 PG-DSO-20-9 PG-DSO-20-31 PG-DSO-20-32 PG-DSO-20-36 PG-DSO-20-43 PG-DSO-20-45 PG-DSO-20-55 PG-DSO-20-66 PG-DSO-20-77
+0
+20
+20
+Package_SO
+Linear_HTSSOP-31-38-1EP_4.4x9.7mm_P0.5mm_EP2.74x4.75mm
+Linear  HTSSOP, 31 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-tssop/tssop_38_05-08-1865.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Linear HTSSOP SO FE38-(31)
+0
+38
+32
+Package_SO
+Linear_HTSSOP-31-38-1EP_4.4x9.7mm_P0.5mm_EP2.74x4.75mm_ThermalVias
+Linear  HTSSOP, 31 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-tssop/tssop_38_05-08-1865.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Linear HTSSOP SO FE38-(31)
+0
+54
+32
+Package_SO
+MFSOP6-4_4.4x3.6mm_P1.27mm
+https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.4pin%20MFSOP6.html
+MFSOP 4 pin SMD
+0
+4
+4
+Package_SO
+MFSOP6-5_4.4x3.6mm_P1.27mm
+https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.5pin%20MFSOP6.html
+MFSOP 4 pin SMD
+0
+5
+5
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
+MSOP, 8 Pin (https://www.diodes.com/assets/Package-Files/MSOP-8EP.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+13
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm_ThermalVias
+MSOP, 8 Pin (https://www.diodes.com/assets/Package-Files/MSOP-8EP.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+18
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm
+MSOP, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+13
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm_ThermalVias
+MSOP, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+18
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.73x1.85mm
+MSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/lm25085.pdf#page=32), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+13
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.73x1.85mm_ThermalVias
+MSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/lm25085.pdf#page=32), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+18
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.95x2.15mm
+MSOP, 8 Pin (http://www.st.com/resource/en/datasheet/pm8834.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+13
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP1.95x2.15mm_ThermalVias
+MSOP, 8 Pin (http://www.st.com/resource/en/datasheet/pm8834.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+18
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm
+MSOP, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf#page=15), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+14
+9
+Package_SO
+MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm_ThermalVias
+MSOP, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf#page=15), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+19
+9
+Package_SO
+MSOP-8_3x3mm_P0.65mm
+MSOP, 8 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+8
+8
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
+MSOP, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3805fg.pdf#page=18), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+15
+11
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm_ThermalVias
+MSOP, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3805fg.pdf#page=18), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+20
+11
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm
+MSOP, 10 Pin (www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en#page=10), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+15
+11
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm_ThermalVias
+MSOP, 10 Pin (www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en#page=10), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+20
+11
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm
+MSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/xtr111.pdf#page=27), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+16
+11
+Package_SO
+MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm_ThermalVias
+MSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/xtr111.pdf#page=27), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+23
+11
+Package_SO
+MSOP-10_3x3mm_P0.5mm
+MSOP, 10 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant BA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO Texas_DGS0010A
+0
+10
+10
+Package_SO
+MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm
+MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081666_g_mse12.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+17
+13
+Package_SO
+MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm_ThermalVias
+MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081666_g_mse12.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+24
+13
+Package_SO
+MSOP-12_3x4.039mm_P0.65mm
+MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081668_a_ms12.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+12
+12
+Package_SO
+MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
+MSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+21
+17
+Package_SO
+MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_ThermalVias
+MSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+28
+17
+Package_SO
+MSOP-16_3x4.039mm_P0.5mm
+MSOP, 16 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081669_A_MS16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+MSOP SO
+0
+16
+16
+Package_SO
+NXP_HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.2x3.4mm
+HTSSOP, 28 Pin (https://www.nxp.com/docs/en/package-information/SOT1172-3.pdf)
+HTSSOP SO
+0
+41
+29
+Package_SO
+NXP_HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.2x3.4mm_ThermalVias
+HTSSOP, 28 Pin (https://www.nxp.com/docs/en/package-information/SOT1172-3.pdf)
+HTSSOP SO
+0
+50
+29
+Package_SO
+ONSemi_SO-8FL_488AA
+ON Semi DFN5 5x6mm 1.27P SO-8FL CASE 488A https://www.onsemi.com/pub/Collateral/488AA.PDF
+ON Semi DFN5 5x6mm 1.27P SO-8FL CASE 488A 
+0
+5
+5
+Package_SO
+OnSemi_751EP_SOIC-4_3.9x4.725mm_P2.54mm
+OnSemi 751EP SOIC, 4 Pin (https://www.onsemi.com/pdf/datasheet/mb8s-d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+OnSemi SOIC SO OnSemi_MB8S OnSemi_SOIC4W
+0
+4
+4
+Package_SO
+OnSemi_Micro8
+ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF
+micro8
+0
+8
+8
+Package_SO
+PSOP-44_16.9x27.17mm_P1.27mm
+PSOP44: plastic thin shrink small outline package; 44 leads; body width 16.90 mm
+PSOP 1.27
+0
+44
+44
+Package_SO
+PowerIntegrations_SO-8
+Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://ac-dc.power.com/sites/default/files/product-docs/senzero_family_datasheet.pdf
+SOIC 1.27
+0
+8
+8
+Package_SO
+PowerIntegrations_SO-8B
+Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://www.mouser.com/ds/2/328/linkswitch-pl_family_datasheet-12517.pdf
+SOIC 1.27
+0
+7
+7
+Package_SO
+PowerIntegrations_SO-8C
+Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://www.mouser.com/ds/2/328/linkswitch-pl_family_datasheet-12517.pdf
+SOIC 1.27
+0
+7
+7
+Package_SO
+PowerIntegrations_eSOP-12B
+eSOP-12B SMT Flat Package with Heatsink Tab, see https://ac-dc.power.com/sites/default/files/product-docs/topswitch-jx_family_datasheet.pdf
+Power Integrations K Package
+0
+12
+12
+Package_SO
+PowerPAK_SO-8L_Single
+PowerPAK SO-8L Single (https://www.vishay.com/docs/64721/an913.pdf)
+PowerPAK SO-8L_Single
+0
+13
+5
+Package_SO
+PowerPAK_SO-8_Dual
+PowerPAK SO-8 Dual (https://www.vishay.com/docs/71655/powerpak.pdf, https://www.vishay.com/docs/72600/72600.pdf)
+PowerPAK SO-8 Dual
+0
+10
+6
+Package_SO
+PowerPAK_SO-8_Single
+PowerPAK SO-8 Single (https://www.vishay.com/docs/71655/powerpak.pdf, https://www.vishay.com/docs/72599/72599.pdf)
+PowerPAK SO-8 Single
+0
+9
+5
+Package_SO
+PowerSSO-16-1EP_3.9x4.9mm_P0.5mm_EP2.5x3.61mm
+PowerSSO, 16 Pin (https://www.st.com/resource/en/datasheet/vnd7020aj.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PowerSSO SO
+0
+18
+17
+Package_SO
+PowerSSO-16-1EP_3.9x4.9mm_P0.5mm_EP2.5x3.61mm_ThermalVias
+PowerSSO, 16 Pin (https://www.st.com/resource/en/datasheet/vnd7020aj.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+PowerSSO SO
+0
+27
+17
+Package_SO
+QSOP-16_3.9x4.9mm_P0.635mm
+QSOP, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0055.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+QSOP SO
+0
+16
+16
+Package_SO
+QSOP-20_3.9x8.7mm_P0.635mm
+QSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0055.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+QSOP SO
+0
+20
+20
+Package_SO
+QSOP-24_3.9x8.7mm_P0.635mm
+QSOP, 24 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0055.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+QSOP SO
+0
+24
+24
+Package_SO
+QSOP-28_3.9x9.9mm_P0.635mm
+QSOP, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0055.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+QSOP SO
+0
+28
+28
+Package_SO
+Renesas_SOP-32_11.4x20.75mm_P1.27mm
+Renesas  SOP, 32 Pin (https://www.renesas.com/en/document/psc/package-drawing-sop-32pin-prsp0032df), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Renesas SOP SO
+0
+32
+32
+Package_SO
+SO-4_4.4x2.3mm_P1.27mm
+4-Lead Plastic Small Outline (SO), see http://datasheet.octopart.com/OPIA403BTRE-Optek-datasheet-5328560.pdf
+SO SOIC 1.27
+0
+4
+4
+Package_SO
+SO-4_4.4x3.6mm_P2.54mm
+4-Lead Plastic Small Outline (SO), see https://www.elpro.org/de/index.php?controller=attachment&id_attachment=339
+SO SOIC 2.54
+0
+4
+4
+Package_SO
+SO-4_4.4x3.9mm_P2.54mm
+SO, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=10047&prodName=TLP3123), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+4
+4
+Package_SO
+SO-4_4.4x4.3mm_P2.54mm
+4-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/docs/AV02-0173EN
+SO SOIC 2.54
+0
+4
+4
+Package_SO
+SO-4_7.6x3.6mm_P2.54mm
+SO, 4 Pin (https://everlightamericas.com/index.php?controller=attachment&id_attachment=3535), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO Everlight_EL101X-G
+0
+4
+4
+Package_SO
+SO-5-6_4.55x3.7mm_P1.27mm
+SO, 5 Pin (https://toshiba.semicon-storage.com/us/semiconductor/design-development/package/detail.5pin%20SO6.html), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO TLP2310 Toshiba
+0
+5
+5
+Package_SO
+SO-5_4.4x3.6mm_P1.27mm
+5-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SO SOIC 1.27
+0
+5
+5
+Package_SO
+SO-6L_10x3.84mm_P1.27mm
+6-pin plasic small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770
+SO-6L
+0
+6
+6
+Package_SO
+SO-6_4.4x3.6mm_P1.27mm
+6-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SO SOIC 1.27
+0
+6
+6
+Package_SO
+SO-8_3.9x4.9mm_P1.27mm
+SO, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+8
+8
+Package_SO
+SO-14_3.9x8.65mm_P1.27mm
+SO, 14 Pin (https://www.st.com/resource/en/datasheet/l6491.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+14
+14
+Package_SO
+SO-14_5.3x10.2mm_P1.27mm
+SO, 14 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+14
+14
+Package_SO
+SO-16_3.9x9.9mm_P1.27mm
+SO, 16 Pin (https://www.nxp.com/docs/en/package-information/SOT109-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO SOT109-1
+0
+16
+16
+Package_SO
+SO-16_5.3x10.2mm_P1.27mm
+SO, 16 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+16
+16
+Package_SO
+SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm
+SO, 20 Pin (http://www.ti.com/lit/ds/symlink/opa569.pdf, http://www.ti.com/lit/an/slma004b/slma004b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+23
+21
+Package_SO
+SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm_ThermalVias
+SO, 20 Pin (http://www.ti.com/lit/ds/symlink/opa569.pdf, http://www.ti.com/lit/an/slma004b/slma004b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+51
+21
+Package_SO
+SO-20_5.3x12.6mm_P1.27mm
+SO, 20 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+20
+20
+Package_SO
+SO-20_12.8x7.5mm_P1.27mm
+SO-20, 12.8x7.5mm, https://www.nxp.com/docs/en/data-sheet/SA605.pdf
+S0-20 
+0
+20
+20
+Package_SO
+SO-24_5.3x15mm_P1.27mm
+SO, 24 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SO SO
+0
+24
+24
+Package_SO
+SOIC-4_4.55x2.6mm_P1.27mm
+SOIC, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12884&prodName=TLP291), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+4
+4
+Package_SO
+SOIC-4_4.55x3.7mm_P2.54mm
+SOIC, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=11791&prodName=TLP185), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+4
+4
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
+SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+13
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias
+SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
+SOIC, 8 Pin (http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx#page=8), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+13
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias
+SOIC, 8 Pin (http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx#page=8), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm
+SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+13
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm_ThermalVias
+SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm
+SOIC, 8 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2303A/document_id/494#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+13
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm_ThermalVias
+SOIC, 8 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2303A/document_id/494#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm
+SOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+14
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias
+SOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+23
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm
+SOIC, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+13
+9
+Package_SO
+SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm_ThermalVias
+SOIC, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+9
+Package_SO
+SOIC-8-N7_3.9x4.9mm_P1.27mm
+8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], pin 7 removed (Microchip Packaging Specification 00000049BS.pdf, http://www.onsemi.com/pub/Collateral/NCP1207B.PDF)
+SOIC 1.27
+0
+7
+7
+Package_SO
+SOIC-8_3.9x4.9mm_P1.27mm
+SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+8
+8
+Package_SO
+SOIC-8_5.3x5.3mm_P1.27mm
+SOIC, 8 Pin (JEITA/EIAJ ED-7311-19 variation 08-001-BBA and Atmel/Microchip, 208 mils width, https://www.jeita.or.jp/japanese/standard/book/ED-7311-19/#target/page_no=21, https://ww1.microchip.com/downloads/en/DeviceDoc/20005045C.pdf#page=23, https://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=162), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO P-SOP SOP SOP-8 SO SO-8 8S2 S2AE/F K04-056 CASE-751BE SO8W 8-Pin-SOIC PSA W8-2 W8-4 W8MS-1 FPT-8P-M08
+0
+8
+8
+Package_SO
+SOIC-8_5.3x6.2mm_P1.27mm
+SOIC, 8 Pin (Texas Instruments (based on JEITA/EIAJ 08-001-BBA), 208 mils width, https://www.ti.com/lit/ml/msop001a/msop001a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO P-SOP SOP SOP-8 SO SO-8 PS
+0
+8
+8
+Package_SO
+SOIC-8_7.5x5.85mm_P1.27mm
+SOIC, 8 Pin (http://www.ti.com/lit/ml/mpds382b/mpds382b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+8
+8
+Package_SO
+SOIC-10_3.9x4.9mm_P1mm
+SOIC, 10 Pin (https://www.onsemi.com/pub/Collateral/751BQ.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO SOIC-10 NB
+0
+10
+10
+Package_SO
+SOIC-14-16_3.9x9.9mm_P1.27mm
+SOIC, 16 Pin package with pin 2 and 13 removed for voltage clearance  (UCC256301, https://www.ti.com/lit/ds/symlink/ucc256301.pdf)
+SOIC SO
+0
+14
+14
+Package_SO
+SOIC-14W_7.5x9mm_P1.27mm
+SOIC, 14 Pin (JEDEC MS-013AF, https://www.analog.com/media/en/package-pcb-resources/package/54614177245586rw_14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+14
+14
+Package_SO
+SOIC-14_3.9x8.7mm_P1.27mm
+SOIC, 14 Pin (JEDEC MS-012AB, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+14
+14
+Package_SO
+SOIC-16W-12_7.5x10.3mm_P1.27mm
+SOIC-16 With 12 Pin Placed - Wide, 7.50 mm Body [SOIC] (https://docs.broadcom.com/docs/AV02-0169EN)
+SOIC 1.27 16 12 Wide
+0
+12
+12
+Package_SO
+SOIC-16W_5.3x10.2mm_P1.27mm
+SOIC, 16 Pin (http://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO TI-NS TI-NS0016A
+0
+16
+16
+Package_SO
+SOIC-16W_7.5x10.3mm_P1.27mm
+SOIC, 16 Pin (JEDEC MS-013AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/rw_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+16
+16
+Package_SO
+SOIC-16W_7.5x12.8mm_P1.27mm
+SOIC, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ri_soic_ic/ri_16_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+16
+16
+Package_SO
+SOIC-16_3.9x9.9mm_P1.27mm
+SOIC, 16 Pin (JEDEC MS-012, variation AC, https://www.jedec.org/document_search?search_api_views_fulltext=MS-012, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO 16-pin-NSOP R-16 R-16-S D0016A M2B SO16 SOT109-1 751B SOIC_N narrow
+0
+16
+16
+Package_SO
+SOIC-16_4.55x10.3mm_P1.27mm
+SOIC, 16 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12858&prodName=TLP291-4), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+16
+16
+Package_SO
+SOIC-18W_7.5x11.6mm_P1.27mm
+SOIC, 18 Pin (JEDEC MS-013AB, https://www.analog.com/media/en/package-pcb-resources/package/33254132129439rw_18.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+18
+18
+Package_SO
+SOIC-20W_7.5x12.8mm_P1.27mm
+SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+20
+Package_SO
+SOIC-20W_7.5x15.4mm_P1.27mm
+SOIC, 20 Pin (JEDEC MS-013AD, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/RI_20_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+20
+20
+Package_SO
+SOIC-24W_7.5x15.4mm_P1.27mm
+SOIC, 24 Pin (JEDEC MS-013AD, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/RW_24.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+24
+24
+Package_SO
+SOIC-28W_7.5x17.9mm_P1.27mm
+SOIC, 28 Pin (JEDEC MS-013AE, https://www.analog.com/media/en/package-pcb-resources/package/35833120341221rw_28.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+28
+28
+Package_SO
+SOIC-28W_7.5x18.7mm_P1.27mm
+SOIC, 28 Pin (https://www.akm.com/akm/en/file/datasheet/AK5394AVS.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+28
+28
+Package_SO
+SOIC-32_7.518x20.777mm_P1.27mm
+SOIC, 32 Pin (JEDEC MO-119-B, 300 mils width, variation AC, https://www.jedec.org/system/files/docs/Mo-119b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOIC SO
+0
+32
+32
+Package_SO
+SOJ-24_7.62x15.875mm_P1.27mm
+SOJ, 24 Pin (JEDEC MS-023-A, 300 mils width, variation AA, https://www.jedec.org/system/files/docs/Ms-023a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+24
+24
+Package_SO
+SOJ-28_7.62x18.415mm_P1.27mm
+SOJ, 28 Pin (JEDEC MS-023-A, 300 mils width, variation AD, https://www.jedec.org/system/files/docs/Ms-023a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+28
+28
+Package_SO
+SOJ-28_10.16x18.415mm_P1.27mm
+SOJ, 28 Pin (JEDEC MS-027-A, 400 mils width, variation AA, https://www.jedec.org/system/files/docs/Ms-027a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+28
+28
+Package_SO
+SOJ-32_7.62x20.955mm_P1.27mm
+SOJ, 32 Pin (JEDEC MS-023-A, 300 mils width, variation AE, https://www.jedec.org/system/files/docs/Ms-023a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+32
+32
+Package_SO
+SOJ-32_10.16x20.955mm_P1.27mm
+SOJ, 32 Pin (JEDEC MS-027-A, 400 mils width, variation AC, https://www.jedec.org/system/files/docs/Ms-027a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+32
+32
+Package_SO
+SOJ-36_10.16x23.495mm_P1.27mm
+SOJ, 36 Pin (JEDEC MS-027-A, 400 mils width, variation AE, https://www.jedec.org/system/files/docs/Ms-027a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+36
+36
+Package_SO
+SOJ-44_10.16x28.575mm_P1.27mm
+SOJ, 44 Pin (JEDEC MS-027-A, 400 mils width, variation AH, https://www.jedec.org/system/files/docs/Ms-027a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOJ SO
+0
+44
+44
+Package_SO
+SOP-4_3.8x4.1mm_P2.54mm
+SOP, 4 Pin (http://www.ixysic.com/home/pdfs.nsf/www/CPC1017N.pdf/$file/CPC1017N.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+4
+4
+Package_SO
+SOP-4_4.4x2.6mm_P1.27mm
+SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+4
+4
+Package_SO
+SOP-4_7.5x4.1mm_P2.54mm
+SOP, 4 Pin (https://www.vishay.com/docs/83515/tclt1000.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO Vishay_TCLT100x
+0
+4
+4
+Package_SO
+SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm
+SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX112.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+13
+9
+Package_SO
+SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm_ThermalVias
+SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX112.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+20
+9
+Package_SO
+SOP-8_3.9x4.9mm_P1.27mm
+SOP, 8 Pin (http://www.macronix.com/Lists/Datasheet/Attachments/7534/MX25R3235F,%20Wide%20Range,%2032Mb,%20v1.6.pdf#page=79), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+8
+8
+Package_SO
+SOP-8_3.76x4.96mm_P1.27mm
+SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX211.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+8
+8
+Package_SO
+SOP-8_6.62x9.15mm_P2.54mm
+SOP, 8 Pin (http://www.ti.com/lit/ds/symlink/iso1050.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+8
+8
+Package_SO
+SOP-8_6.605x9.655mm_P2.54mm
+SOP, 8 Pin (https://www.onsemi.com/pdf/datasheet/hcpl2631m-d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+8
+8
+Package_SO
+SOP-16_3.9x9.9mm_P1.27mm
+SOP, 16 Pin (https://www.diodes.com/assets/Datasheets/PAM8403.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+16
+16
+Package_SO
+SOP-16_4.4x10.4mm_P1.27mm
+SOP, 16 Pin (https://www.vishay.com/docs/83513/tcmd1000.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+16
+16
+Package_SO
+SOP-16_4.55x10.3mm_P1.27mm
+SOP, 16 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12855&prodName=TLP290-4), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+16
+16
+Package_SO
+SOP-18_7.495x11.515mm_P1.27mm
+SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+18
+18
+Package_SO
+SOP-18_7x12.5mm_P1.27mm
+SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+18
+18
+Package_SO
+SOP-20_7.5x12.8mm_P1.27mm
+SOP, 20 Pin (https://www.holtek.com/documents/10179/116723/sop20-300.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+20
+20
+Package_SO
+SOP-24_7.5x15.4mm_P1.27mm
+SOP, 24 Pin (http://www.issi.com/WW/pdf/31FL3218.pdf#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+24
+24
+Package_SO
+SOP-28_8.4x18.16mm_P1.27mm
+SOP, 28 Pin (https://www.issi.com/WW/pdf/62-65C256AL.pdf#page=12), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+28
+28
+Package_SO
+SOP-32_11.305x20.495mm_P1.27mm
+SOP, 32 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+32
+32
+Package_SO
+SOP-44_12.6x28.5mm_P1.27mm
+SOP, 44 Pin (https://www.mxic.com.tw/Lists/Datasheet/Attachments/8177/MX23C6410,%205V,%2064Mb,%20v3.1.pdf#page=5), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+44
+44
+Package_SO
+SOP-44_13.3x28.2mm_P1.27mm
+SOP, 44 Pin (https://www.mouser.com/datasheet/2/380/AM29F400B_EOL_21505e8-9219.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOP SO
+0
+44
+44
+Package_SO
+SSO-4_6.7x5.1mm_P2.54mm_Clearance8mm
+4-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/84299/vor1142b4.pdf
+SSO Stretched SO SOIC 2.54
+0
+4
+4
+Package_SO
+SSO-6_6.8x4.6mm_P1.27mm_Clearance7mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC 1.27
+0
+6
+6
+Package_SO
+SSO-6_6.8x4.6mm_P1.27mm_Clearance8mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC 1.27
+0
+6
+6
+Package_SO
+SSO-7-8_6.4x9.78mm_P2.54mm
+SSO, 7 Pin (https://b2b-api.panasonic.eu/file_stream/pids/fileversion/2787), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSO SO
+0
+7
+7
+Package_SO
+SSO-8-7_6.4x9.7mm_P2.54mm
+SSO, 7 Pin (https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2312161855_BC-BC2213A_C596512.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSO SO
+0
+7
+7
+Package_SO
+SSO-8_6.7x9.8mm_P2.54mm_Clearance8mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/83831/lh1533ab.pdf
+SSO Stretched SO SOIC Pitch 2.54
+0
+8
+8
+Package_SO
+SSO-8_6.8x5.9mm_P1.27mm_Clearance7mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC Pitch 1.27
+0
+8
+8
+Package_SO
+SSO-8_6.8x5.9mm_P1.27mm_Clearance8mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC Pitch 1.27
+0
+8
+8
+Package_SO
+SSO-8_9.6x6.3mm_P1.27mm_Clearance10.5mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC Pitch 1.27
+0
+8
+8
+Package_SO
+SSO-8_13.6x6.3mm_P1.27mm_Clearance14.2mm
+8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true
+SSO Stretched SO SOIC Pitch 1.27
+0
+8
+8
+Package_SO
+SSOP-4_4.4x2.6mm_P1.27mm
+SSOP, 4 Pin (https://www.vishay.com/docs/83465/vos618a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO
+0
+4
+4
+Package_SO
+SSOP-8_2.95x2.8mm_P0.65mm
+SSOP-8 2.9 x2.8mm Pitch 0.65mm
+SSOP-8 2.95x2.8mm Pitch 0.65mm
+0
+8
+8
+Package_SO
+SSOP-8_3.9x5.05mm_P1.27mm
+SSOP, 8 Pin (https://www.fujitsu.com/uk/Images/MB85RS16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO
+0
+8
+8
+Package_SO
+SSOP-8_3.95x5.21x3.27mm_P1.27mm
+SSOP-8 3.95x5.21x3.27mm Pitch 1.27mm
+SSOP-8 3.95x5.21x3.27mm 1.27mm
+0
+8
+8
+Package_SO
+SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm
+SSOP, 10 Pin (http://download.py32.org/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/zh-CN/PY32F002A%20%E7%B3%BB%E5%88%97%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C_Rev1.0.pdf#page=44), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO ESSOP-10
+0
+12
+11
+Package_SO
+SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm_ThermalVias
+SSOP, 10 Pin (http://download.py32.org/%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C/zh-CN/PY32F002A%20%E7%B3%BB%E5%88%97%E6%95%B0%E6%8D%AE%E6%89%8B%E5%86%8C_Rev1.0.pdf#page=44), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO ESSOP-10
+0
+15
+11
+Package_SO
+SSOP-10_3.9x4.9mm_P1.00mm
+10-Lead SSOP, 3.9 x 4.9mm body, 1.00mm pitch (http://www.st.com/resource/en/datasheet/viper01.pdf)
+SSOP 3.9 4.9 1.00
+0
+10
+10
+Package_SO
+SSOP-14_5.3x6.2mm_P0.65mm
+SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot337-1_po.pdf)
+SSOP 0.65
+0
+14
+14
+Package_SO
+SSOP-16_3.9x4.9mm_P0.635mm
+SSOP16: plastic shrink small outline package; 16 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot519-1_po.pdf)
+SSOP 0.635
+0
+16
+16
+Package_SO
+SSOP-16_4.4x5.2mm_P0.65mm
+SSOP16: plastic shrink small outline package; 16 leads; body width 4.4 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot369-1_po.pdf)
+SSOP 0.65
+0
+16
+16
+Package_SO
+SSOP-16_5.3x6.2mm_P0.65mm
+SSOP, 16 Pin (https://assets.nexperia.com/documents/data-sheet/74HC_HCT165.pdf#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO
+0
+16
+16
+Package_SO
+SSOP-18_4.4x6.5mm_P0.65mm
+SSOP18: plastic shrink small outline package; 18 leads; body width 4.4 mm (http://toshiba.semicon-storage.com/info/docget.jsp?did=30523&prodName=TBD62783APG)
+SSOP 0.65
+0
+18
+18
+Package_SO
+SSOP-20_3.9x8.7mm_P0.635mm
+SSOP20: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT231X.pdf)
+SSOP 0.635
+0
+20
+20
+Package_SO
+SSOP-20_4.4x6.5mm_P0.65mm
+SSOP, 20 Pin (https://www.jedec.org/system/files/docs/Mo-152c.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO JEDEC-MO-152-AC SOT266-1 Nisshinbo-PI-SSOP20-E-A Rohm-SSOP-B20
+0
+20
+20
+Package_SO
+SSOP-20_5.3x7.2mm_P0.65mm
+SSOP, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001800C.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO
+0
+20
+20
+Package_SO
+SSOP-24_3.9x8.7mm_P0.635mm
+SSOP24: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf)
+SSOP 0.635
+0
+24
+24
+Package_SO
+SSOP-24_5.3x8.2mm_P0.65mm
+24-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (see Microchip Packaging Specification 00000049BS.pdf)
+SSOP 0.65
+0
+24
+24
+Package_SO
+SSOP-28_3.9x9.9mm_P0.635mm
+SSOP28: plastic shrink small outline package; 28 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf)
+SSOP 0.635
+0
+28
+28
+Package_SO
+SSOP-28_5.3x10.2mm_P0.65mm
+28-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (see Microchip Packaging Specification 00000049BS.pdf)
+SSOP 0.65
+0
+28
+28
+Package_SO
+SSOP-44_5.3x12.8mm_P0.5mm
+44-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (http://cds.linear.com/docs/en/datasheet/680313fa.pdf)
+SSOP 0.5
+0
+44
+44
+Package_SO
+SSOP-48_5.3x12.8mm_P0.5mm
+SSOP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-ssop/05081887_A_G48.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SSOP SO
+0
+48
+48
+Package_SO
+SSOP-48_7.5x15.9mm_P0.635mm
+SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot370-1_po.pdf)
+SSOP 0.635
+0
+48
+48
+Package_SO
+SSOP-56_7.5x18.5mm_P0.635mm
+SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot371-1_po.pdf)
+SSOP 0.635
+0
+56
+56
+Package_SO
+STC_SOP-16_3.9x9.9mm_P1.27mm
+STC  SOP, 16 Pin (https://www.stcmicro.com/datasheet/STC15F2K60S2-en.pdf#page=156), generated with kicad-footprint-generator ipc_gullwing_generator.py
+STC SOP SO
+0
+16
+16
+Package_SO
+ST_MultiPowerSO-30
+MultiPowerSO-30 3EP 16.0x17.2mm Pitch 1mm (http://www.st.com/resource/en/datasheet/vnh2sp30-e.pdf)
+MultiPowerSO-30 3EP 16.0x17.2mm Pitch 1mm
+0
+33
+33
+Package_SO
+ST_PowerSSO-24_SlugDown
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm
+0
+25
+25
+Package_SO
+ST_PowerSSO-24_SlugDown_ThermalVias
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm
+0
+38
+25
+Package_SO
+ST_PowerSSO-24_SlugUp
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm
+0
+24
+24
+Package_SO
+ST_PowerSSO-36_SlugDown
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm
+0
+37
+37
+Package_SO
+ST_PowerSSO-36_SlugDown_ThermalVias
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm
+0
+50
+37
+Package_SO
+ST_PowerSSO-36_SlugUp
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf)
+ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm
+0
+36
+36
+Package_SO
+TI_SO-PowerPAD-8
+8-Lead Plastic PSOP, Exposed Die Pad (TI DDA0008B, see http://www.ti.com/lit/ds/symlink/lm3404.pdf)
+SSOP 0.50 exposed pad
+0
+12
+9
+Package_SO
+TI_SO-PowerPAD-8_ThermalVias
+8-pin HTSOP package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm² body, exposed pad, thermal vias with large copper area, as proposed in http://www.ti.com/lit/ds/symlink/tps5430.pdf
+HTSOP 1.27
+0
+19
+9
+Package_SO
+TSOP-5_1.65x3.05mm_P0.95mm
+TSOP-5 package (comparable to TSOT-23), https://www.vishay.com/docs/71200/71200.pdf
+Jedec MO-193C TSOP-5L
+0
+5
+5
+Package_SO
+TSOP-6_1.65x3.05mm_P0.95mm
+TSOP-6 package (comparable to TSOT-23), https://www.vishay.com/docs/71200/71200.pdf
+Jedec MO-193C TSOP-6L
+0
+6
+6
+Package_SO
+TSOP-I-24_12.4x6mm_P0.5mm
+TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+24
+24
+Package_SO
+TSOP-I-24_14.4x6mm_P0.5mm
+TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+24
+24
+Package_SO
+TSOP-I-24_16.4x6mm_P0.5mm
+TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AC), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+24
+24
+Package_SO
+TSOP-I-24_18.4x6mm_P0.5mm
+TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AD), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+24
+24
+Package_SO
+TSOP-I-28_11.8x8mm_P0.55mm
+TSOP I, 28 pins, 18.8x8mm body, 0.55mm pitch, IPC-calculated pads (http://ww1.microchip.com/downloads/en/devicedoc/doc0807.pdf)
+TSOP I 28 pins
+0
+28
+28
+Package_SO
+TSOP-I-32_11.8x8mm_P0.5mm
+TSOP-I, 32 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+32
+32
+Package_SO
+TSOP-I-32_12.4x8mm_P0.5mm
+TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+32
+32
+Package_SO
+TSOP-I-32_14.4x8mm_P0.5mm
+TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+32
+32
+Package_SO
+TSOP-I-32_16.4x8mm_P0.5mm
+TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BC), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+32
+32
+Package_SO
+TSOP-I-32_18.4x8mm_P0.5mm
+TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BD), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+32
+32
+Package_SO
+TSOP-I-32_18.4x8mm_P0.5mm_Reverse
+TSOP I, 32 pins, 18.4x8mm body (http://www.futurlec.com/Datasheet/Memory/628128.pdf), reverse mount
+TSOP I 32 reverse
+0
+32
+32
+Package_SO
+TSOP-I-40_12.4x10mm_P0.5mm
+TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+40
+40
+Package_SO
+TSOP-I-40_14.4x10mm_P0.5mm
+TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+40
+40
+Package_SO
+TSOP-I-40_16.4x10mm_P0.5mm
+TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CC), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+40
+40
+Package_SO
+TSOP-I-40_18.4x10mm_P0.5mm
+TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CD), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+40
+40
+Package_SO
+TSOP-I-48_12.4x12mm_P0.5mm
+TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+48
+48
+Package_SO
+TSOP-I-48_14.4x12mm_P0.5mm
+TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+48
+48
+Package_SO
+TSOP-I-48_16.4x12mm_P0.5mm
+TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DC), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+48
+48
+Package_SO
+TSOP-I-48_18.4x12mm_P0.5mm
+TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DD), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+48
+48
+Package_SO
+TSOP-I-56_14.4x14mm_P0.5mm
+TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+56
+56
+Package_SO
+TSOP-I-56_16.4x14mm_P0.5mm
+TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+56
+56
+Package_SO
+TSOP-I-56_18.4x14mm_P0.5mm
+TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EC), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-I SO
+0
+56
+56
+Package_SO
+TSOP-II-32_21.0x10.2mm_P1.27mm
+32-lead plastic TSOP; Type II
+TSOP-II 32
+0
+32
+32
+Package_SO
+TSOP-II-40-44_10.16x18.37mm_P0.8mm
+TSOP-II, 40 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tsop2-44pin-ptsb0044ge-e), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-II SO
+0
+40
+40
+Package_SO
+TSOP-II-44_10.16x18.41mm_P0.8mm
+TSOP-II, 44 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOP-II SO
+0
+44
+44
+Package_SO
+TSOP-II-54_22.2x10.16mm_P0.8mm
+54-lead TSOP typ II package
+TSOPII TSOP2
+0
+54
+54
+Package_SO
+TSSOP-4_4.4x5mm_P4mm
+TSSOP, 4 Pin (https://www.onsemi.com/pub/Collateral/MDB8S-D.PDF#page=4), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+4
+4
+Package_SO
+TSSOP-8_3x3mm_P0.65mm
+TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot505-1_po.pdf)
+SSOP 0.65
+0
+8
+8
+Package_SO
+TSSOP-8_4.4x3mm_P0.65mm
+TSSOP, 8 Pin (JEDEC MO-153 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+8
+8
+Package_SO
+TSSOP-10_3x3mm_P0.5mm
+TSSOP10: plastic thin shrink small outline package; 10 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot552-1_po.pdf)
+SSOP 0.5
+0
+10
+10
+Package_SO
+TSSOP-14-1EP_4.4x5mm_P0.65mm
+14-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [TSSOP] with exposed pad (http://cds.linear.com/docs/en/datasheet/34301fa.pdf)
+SSOP 0.65 exposed pad
+0
+18
+15
+Package_SO
+TSSOP-14_4.4x3.6mm_P0.4mm
+TSSOP, 14 Pin (JEDEC MO-194 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+14
+14
+Package_SO
+TSSOP-14_4.4x5mm_P0.65mm
+TSSOP, 14 Pin (JEDEC MO-153 Var AB-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+14
+14
+Package_SO
+TSSOP-16-1EP_4.4x5mm_P0.65mm
+FE Package; 16-Lead Plastic TSSOP (4.4mm); Exposed Pad Variation BB; (see Linear Technology 1956f.pdf)
+SSOP 0.65
+0
+24
+17
+Package_SO
+TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm
+TSSOP, 16 Pin (Allegro A4954 https://www.allegromicro.com/-/media/Files/Datasheets/A4954-Datasheet.ashx), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+21
+17
+Package_SO
+TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm_ThermalVias
+TSSOP, 16 Pin (Allegro A4954 https://www.allegromicro.com/-/media/Files/Datasheets/A4954-Datasheet.ashx), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+26
+17
+Package_SO
+TSSOP-16_4.4x3.6mm_P0.4mm
+TSSOP, 16 Pin (JEDEC MO-194 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+16
+16
+Package_SO
+TSSOP-16_4.4x5mm_P0.65mm
+TSSOP, 16 Pin (https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO JEDEC-MO-153-AB TI-PW0016A Microchip-ST Toshiba-TSSOP16-P-0044-0.65A NXP-SOT403-1 Infineon-P-TSSOP-16-800
+0
+16
+16
+Package_SO
+TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
+TSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100132.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+25
+21
+Package_SO
+TSSOP-20_4.4x5mm_P0.4mm
+TSSOP, 20 Pin (JEDEC MO-194 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+20
+20
+Package_SO
+TSSOP-20_4.4x5mm_P0.5mm
+TSSOP, 20 Pin (JEDEC MO-153 Var BA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+20
+20
+Package_SO
+TSSOP-20_4.4x6.5mm_P0.65mm
+TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+20
+20
+Package_SO
+TSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm
+TSSOP, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=37), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+31
+25
+Package_SO
+TSSOP-24_4.4x5mm_P0.4mm
+TSSOP, 24 Pin (JEDEC MO-153 Var CA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+24
+24
+Package_SO
+TSSOP-24_4.4x6.5mm_P0.5mm
+TSSOP, 24 Pin (JEDEC MO-153 Var BB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+24
+24
+Package_SO
+TSSOP-24_4.4x7.8mm_P0.65mm
+TSSOP, 24 Pin (JEDEC MO-153 Var AD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+24
+24
+Package_SO
+TSSOP-24_6.1x7.8mm_P0.65mm
+TSSOP, 24 Pin (JEDEC MO-153 Var DA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+24
+24
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.74x4.75mm
+TSSOP, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/lt3762.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+35
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.74x4.75mm_ThermalVias
+TSSOP, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/lt3762.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
+TSSOP, 28 Pin (JEDEC MO-153 Var AET Pkg.Code U28E-4 https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+35
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.7mm_Mask3.1x4.05mm
+TSSOP, 28 Pin (Texas Instruments TAS5805M https://www.ti.com/lit/gpn/tas5805m), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+34
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.7mm_Mask3.1x4.05mm_ThermalVias
+TSSOP, 28 Pin (Texas Instruments TAS5805M https://www.ti.com/lit/gpn/tas5805m), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+59
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.05x7.56mm
+TSSOP, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/38921fc.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+37
+29
+Package_SO
+TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.05x7.56mm_ThermalVias
+TSSOP, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/38921fc.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+53
+29
+Package_SO
+TSSOP-28_4.4x7.8mm_P0.5mm
+TSSOP, 28 Pin (JEDEC MO-153 Var BC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+28
+28
+Package_SO
+TSSOP-28_4.4x9.7mm_P0.65mm
+TSSOP, 28 Pin (JEDEC MO-153 Var AE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+28
+28
+Package_SO
+TSSOP-28_6.1x7.8mm_P0.5mm
+TSSOP, 28 Pin (JEDEC MO-153 Var EA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+28
+28
+Package_SO
+TSSOP-28_6.1x9.7mm_P0.65mm
+TSSOP, 28 Pin (JEDEC MO-153 Var DB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+28
+28
+Package_SO
+TSSOP-28_8x9.7mm_P0.65mm
+TSSOP, 28 Pin (JEDEC MO-153 Var GA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+28
+28
+Package_SO
+TSSOP-30_4.4x7.8mm_P0.5mm
+TSSOP, 30 Pin (JEDEC MO-153 Var BC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+30
+30
+Package_SO
+TSSOP-30_6.1x9.7mm_P0.65mm
+TSSOP, 30 Pin (JEDEC MO-153 Var DB-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+30
+30
+Package_SO
+TSSOP-32_4.4x6.5mm_P0.4mm
+TSSOP, 32 Pin (JEDEC MO-153 Var CB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+32
+32
+Package_SO
+TSSOP-32_6.1x11mm_P0.65mm
+TSSOP, 32 Pin (JEDEC MO-153 Var DC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+32
+32
+Package_SO
+TSSOP-32_8x11mm_P0.65mm
+TSSOP, 32 Pin (JEDEC MO-153 Var GB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+32
+32
+Package_SO
+TSSOP-36_4.4x7.8mm_P0.4mm
+TSSOP, 36 Pin (JEDEC MO-153 Var CC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_4.4x9.7mm_P0.5mm
+TSSOP, 36 Pin (JEDEC MO-153 Var BD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_6.1x7.8mm_P0.4mm
+TSSOP, 36 Pin (JEDEC MO-153 Var FA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_6.1x9.7mm_P0.5mm
+TSSOP, 36 Pin (JEDEC MO-153 Var EB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_6.1x12.5mm_P0.65mm
+TSSOP, 36 Pin (JEDEC MO-153 Var DD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_8x9.7mm_P0.5mm
+TSSOP, 36 Pin (JEDEC MO-153 Var HA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-36_8x12.5mm_P0.65mm
+TSSOP, 36 Pin (JEDEC MO-153 Var GC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+36
+36
+Package_SO
+TSSOP-38_4.4x9.7mm_P0.5mm
+TSSOP, 38 Pin (JEDEC MO-153 Var BD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+38
+38
+Package_SO
+TSSOP-38_6.1x12.5mm_P0.65mm
+TSSOP, 38 Pin (JEDEC MO-153 Var DD-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+38
+38
+Package_SO
+TSSOP-40_6.1x11mm_P0.5mm
+TSSOP, 40 Pin (JEDEC MO-153 Var EC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+40
+40
+Package_SO
+TSSOP-40_6.1x14mm_P0.65mm
+TSSOP, 40 Pin (JEDEC MO-153 Var DE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+40
+40
+Package_SO
+TSSOP-40_8x11mm_P0.5mm
+TSSOP, 40 Pin (JEDEC MO-153 Var HB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+40
+40
+Package_SO
+TSSOP-40_8x14mm_P0.65mm
+TSSOP, 40 Pin (JEDEC MO-153 Var GD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+40
+40
+Package_SO
+TSSOP-44_4.4x11.2mm_P0.5mm
+TSSOP44: plastic thin shrink small outline package; 44 leads; body width 4.4 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot510-1_po.pdf)
+SSOP 0.5
+0
+44
+44
+Package_SO
+TSSOP-44_4.4x11mm_P0.5mm
+TSSOP, 44 Pin (JEDEC MO-153 Var BE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+44
+44
+Package_SO
+TSSOP-44_6.1x11mm_P0.5mm
+TSSOP, 44 Pin (JEDEC MO-153 Var EC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+44
+44
+Package_SO
+TSSOP-48_4.4x9.7mm_P0.4mm
+TSSOP, 48 Pin (JEDEC MO-153 Var CD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+48
+Package_SO
+TSSOP-48_6.1x9.7mm_P0.4mm
+TSSOP, 48 Pin (JEDEC MO-153 Var FB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+48
+Package_SO
+TSSOP-48_6.1x12.5mm_P0.5mm
+TSSOP, 48 Pin (JEDEC MO-153 Var ED https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+48
+Package_SO
+TSSOP-48_8x9.7mm_P0.4mm
+TSSOP, 48 Pin (JEDEC MO-153 Var JA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+48
+Package_SO
+TSSOP-48_8x12.5mm_P0.5mm
+TSSOP, 48 Pin (JEDEC MO-153 Var HC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+48
+48
+Package_SO
+TSSOP-50_4.4x12.5mm_P0.5mm
+TSSOP, 50 Pin (JEDEC MO-153 Var BF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+50
+50
+Package_SO
+TSSOP-52_6.1x11mm_P0.4mm
+TSSOP, 52 Pin (JEDEC MO-153 Var FC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+52
+52
+Package_SO
+TSSOP-52_8x11mm_P0.4mm
+TSSOP, 52 Pin (JEDEC MO-153 Var JB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+52
+52
+Package_SO
+TSSOP-56_4.4x11.3mm_P0.4mm
+TSSOP, 56 Pin (JEDEC MO-194 Var AF https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+56
+56
+Package_SO
+TSSOP-56_6.1x12.5mm_P0.4mm
+TSSOP, 56 Pin (JEDEC MO-153 Var FD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+56
+56
+Package_SO
+TSSOP-56_6.1x14mm_P0.5mm
+TSSOP, 56 Pin (JEDEC MO-153 Var EE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+56
+56
+Package_SO
+TSSOP-56_8x12.5mm_P0.4mm
+TSSOP, 56 Pin (JEDEC MO-153 Var JC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+56
+56
+Package_SO
+TSSOP-56_8x14mm_P0.5mm
+TSSOP, 56 Pin (JEDEC MO-153 Var HD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+56
+56
+Package_SO
+TSSOP-60_8x12.5mm_P0.4mm
+TSSOP, 60 Pin (JEDEC MO-153 Var JC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+60
+60
+Package_SO
+TSSOP-64_6.1x14mm_P0.4mm
+TSSOP, 64 Pin (JEDEC MO-153 Var FE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+64
+64
+Package_SO
+TSSOP-64_6.1x17mm_P0.5mm
+TSSOP, 64 Pin (JEDEC MO-153 Var EF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+64
+64
+Package_SO
+TSSOP-64_8x14mm_P0.4mm
+TSSOP, 64 Pin (JEDEC MO-153 Var JD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+64
+64
+Package_SO
+TSSOP-68_8x14mm_P0.4mm
+TSSOP, 68 Pin (JEDEC MO-153 Var JD-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+68
+68
+Package_SO
+TSSOP-80_6.1x17mm_P0.4mm
+TSSOP, 80 Pin (JEDEC MO-153 Var FF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+80
+80
+Package_SO
+TSSOP-100_6.1x20.8mm_P0.4mm
+TSSOP, 100 Pin (JEDEC MO-194 Var BB https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSSOP SO
+0
+100
+100
+Package_SO
+Texas_DAD0032A_HTSSOP-32_6.1x11mm_P0.65mm_TopEP3.71x3.81mm
+Texas DAD0032A HTSSOP, 32 Pin (https://www.ti.com/lit/ds/symlink/tpa3116d2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas HTSSOP SO PowerPAD
+0
+32
+32
+Package_SO
+Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm
+Texas DGN0008B VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tps7a4101.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+11
+9
+Package_SO
+Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm_ThermalVias
+Texas DGN0008B VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tps7a4101.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+21
+9
+Package_SO
+Texas_DGN0008D_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x2.94mm_Mask1.57x1.89mm
+Texas DGN0008D VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa711.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+11
+9
+Package_SO
+Texas_DGN0008D_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x2.94mm_Mask1.57x1.89mm_ThermalVias
+Texas DGN0008D VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa711.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+19
+9
+Package_SO
+Texas_DGN0008G_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x2.94mm_Mask1.846x2.15mm
+Texas DGN0008G VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa711.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+11
+9
+Package_SO
+Texas_DGN0008G_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x2.94mm_Mask1.846x2.15mm_ThermalVias
+Texas DGN0008G VSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa711.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas VSSOP SO
+0
+21
+9
+Package_SO
+Texas_DGS0020A_TSSOP-20_3x5.1mm_P0.5mm
+Texas DGS0020A TSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas TSSOP SO
+0
+20
+20
+Package_SO
+Texas_DKD0036A_HSSOP-36_11x15.9mm_P0.65mm_TopEP5.85x12.65mm
+Texas DKD0036A HSSOP, 36 Pin (https://www.ti.com/lit/ml/pptd185d/pptd185d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas HSSOP SO PowerPAD
+0
+36
+36
+Package_SO
+Texas_DYY0016A_TSOT-23-16_2x4.2mm_P0.5mm
+Texas DYY0016A TSSOP, 16 Pin (https://www.ti.com/lit/ds/symlink/tmux1574.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas TSSOP SO SOT-23-THIN
+0
+16
+16
+Package_SO
+Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm
+Texas Instruments HSOP 9, 1.27mm pitch, 3.9x4.9mm body, exposed pad, DDA0008J (http://www.ti.com/lit/ds/symlink/tps5430.pdf)
+HSOP 1.27
+0
+11
+9
+Package_SO
+Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias
+Texas Instruments HSOP 9, 1.27mm pitch, 3.9x4.9mm body, exposed pad, thermal vias, DDA0008J (http://www.ti.com/lit/ds/symlink/tps5430.pdf)
+HSOP 1.27
+0
+20
+9
+Package_SO
+Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias
+8-pin HTSOP package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm body, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf
+HTSOP 1.27
+0
+18
+9
+Package_SO
+Texas_PW0020A_TSSOP-20_4.4x6.5mm_P0.65mm
+Texas PW0020A TSSOP, 20 Pin (https://www.ti.com/lit/ml/mpds362a/mpds362a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas TSSOP SO
+0
+20
+20
+Package_SO
+Texas_PWP0020A
+20-Pin Thermally Enhanced Thin Shrink Small-Outline Package, Body 4.4x6.5x1.1mm, Pad 3.0x4.2mm, Texas Instruments (see http://www.ti.com/lit/ds/symlink/lm5118.pdf)
+PWP HTSSOP 0.65mm
+0
+25
+21
+Package_SO
+Texas_PWP0028V_TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.7mm_Mask2.94x5.62mm
+Texas PWP0028V TSSOP, 28 Pin (https://www.ti.com/lit/ds/symlink/lm5176.pdf?ts=1728516913971&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FLM5176), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas TSSOP SO
+0
+40
+29
+Package_SO
+Texas_PWP0028V_TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.7mm_Mask2.94x5.62mm_ThermalVias
+Texas PWP0028V TSSOP, 28 Pin (https://www.ti.com/lit/ds/symlink/lm5176.pdf?ts=1728516913971&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FLM5176), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas TSSOP SO
+0
+65
+29
+Package_SO
+Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm
+HSOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lmr14030.pdf#page=28, http://www.ti.com/lit/ml/msoi002j/msoi002j.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOIC SO
+0
+16
+9
+Package_SO
+Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias
+HSOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lmr14030.pdf#page=28, http://www.ti.com/lit/ml/msoi002j/msoi002j.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+HSOIC SO
+0
+23
+9
+Package_SO
+Texas_S-PDSO-G8_3x3mm_P0.65mm
+plastic small outline, https://www.ti.com/lit/ml/mpds028d/mpds028d.pdf, https://www.ti.com/lit/ds/symlink/dac8552.pdf#page=23
+DGK VSSOP SO
+0
+8
+8
+Package_SO
+VSO-40_7.6x15.4mm_P0.762mm
+VSO40: plastic very small outline package; 40 leads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot158-1_po.pdf)
+SSOP 0.762
+0
+40
+40
+Package_SO
+VSO-56_11.1x21.5mm_P0.75mm
+VSO56: plastic very small outline package; 56 leads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot190-1_po.pdf)
+SSOP 0.75
+0
+56
+56
+Package_SO
+VSSOP-8_2.3x2mm_P0.5mm
+VSSOP, 8 Pin (https://www.jedec.org/standards-documents/docs/mo-187-f), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VSSOP SO JEDEC-MO-187-CA TI-DCU0008A
+0
+8
+8
+Package_SO
+VSSOP-8_3x3mm_P0.65mm
+VSSOP, 8 Pin (https://www.jedec.org/standards-documents/docs/mo-187-f), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VSSOP SO JEDEC-MO-187-AA TI-DGK0008A
+0
+8
+8
+Package_SO
+VSSOP-10_3x3mm_P0.5mm
+VSSOP, 10 Pin (http://www.ti.com/lit/ds/symlink/ads1115.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+VSSOP SO
+0
+10
+10
+Package_SO
+Vishay_PowerPAK_1212-8_Dual
+PowerPAK 1212-8 Dual (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72598/72598.pdf)
+Vishay_PowerPAK_1212-8_Dual
+0
+6
+6
+Package_SO
+Vishay_PowerPAK_1212-8_Single
+PowerPAK 1212-8 Single (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72597/72597.pdf)
+Vishay PowerPAK 1212-8 Single
+0
+5
+5
+Package_SO
+Zetex_SM8
+Zetex,  SMD, 8 pin package (http://datasheet.octopart.com/ZDT6758TA-Zetex-datasheet-68057.pdf)
+Zetex SM8
+0
+8
+8
+Package_SON
+Diodes_PowerDI3333-8
+Diodes Incorporated PowerDI3333-8, Plastic Dual Flat No Lead Package, 3.3x3.3x0.8mm Body, https://www.diodes.com/assets/Package-Files/PowerDI3333-8.pdf
+PowerDI 0.65
+0
+13
+5
+Package_SON
+Diodes_PowerDI3333-8_UXC_3.3x3.3mm_P0.65mm
+Diodes Incorporated PowerDI3333-8 UXC, 3.05x3.05x0.8mm Body, https://www.diodes.com/assets/Package-Files/PowerDI3333-8%20(Type%20UXC).pdf
+PowerDI 0.65
+0
+14
+6
+Package_SON
+EPSON_CE-USON-10_USON-10_3.2x2.5mm_P0.7mm
+EPSON 2.5x3.7mm, https://www.microcrystal.com/fileadmin/Media/Products/RTC/Datasheet/RV-1805-C3.pdf
+RTC
+0
+10
+10
+Package_SON
+Fairchild_DualPower33-6_3x3mm
+Fairchild Power33 MOSFET package, 3x3mm (see https://www.fairchildsemi.com/datasheets/FD/FDMC8032L.pdf)
+mosfet
+0
+18
+6
+Package_SON
+Fairchild_MicroPak-6_1.0x1.45mm_P0.5mm
+Fairchild-specific MicroPak-6 1.0x1.45mm Pitch 0.5mm https://www.nxp.com/docs/en/application-note/AN10343.pdff
+Fairchild-specific MicroPak-6 1.0x1.45mm Pitch 0.5mm
+0
+6
+6
+Package_SON
+Fairchild_MicroPak2-6_1.0x1.0mm_P0.35mm
+Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm https://www.nxp.com/docs/en/application-note/AN10343.pdff
+Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm
+0
+6
+6
+Package_SON
+HUSON-3-1EP_2x2mm_P1.3mm_EP1.1x1.6mm
+HUSON, 3 Pin, SOT1061 (Ref: https://assets.nexperia.com/documents/data-sheet/PMEG2020CPA.pdf)
+huson nolead SOT1061
+0
+6
+3
+Package_SON
+HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
+HVSON, 8 Pin (https://www.nxp.com/docs/en/data-sheet/TJA1051.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVSON NoLead
+0
+13
+9
+Package_SON
+HVSON-8-1EP_4x4mm_P0.8mm_EP2.2x3.1mm
+HVSON, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf (page 57)), generated with kicad-footprint-generator ipc_noLead_generator.py
+HVSON NoLead
+0
+13
+9
+Package_SON
+Infineon_PG-LSON-8-1
+https://www.infineon.com/cms/en/product/packages/PG-LSON/PG-LSON-8-1/
+PG-LSON-8-1
+0
+17
+9
+Package_SON
+Infineon_PG-TDSON-8_6.15x5.15mm
+Infineon, PG-TDSON-8, 6.15x5.15x1mm, https://www.infineon.com/dgdl/Infineon-BSC520N15NS3_-DS-v02_02-en.pdf?fileId=db3a30432239cccd0122eee57d9b21a4
+Infineon OptiMOS
+0
+21
+5
+Package_SON
+Infineon_PG-TISON-8-2
+Infineon, PG-TISON-8-2, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-2/
+tison
+0
+23
+7
+Package_SON
+Infineon_PG-TISON-8-3
+Infineon, PG-TISON-8-2, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-2/
+tison
+0
+23
+7
+Package_SON
+Infineon_PG-TISON-8-4
+Infineon, PG-TISON-8-4, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-4/
+tison
+0
+26
+8
+Package_SON
+Infineon_PG-TISON-8-5
+Infineon, PG-TISON-8-5, 8x8x1.1mm, 1mm Pitch, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-5/
+tison
+0
+34
+8
+Package_SON
+MPS_USON-6_1.2x1.6mm_P0.5mm
+MPS  USON, 6 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2151/document_id/4678/#page=21), generated with kicad-footprint-generator ipc_noLead_generator.py
+MPS USON NoLead
+0
+6
+6
+Package_SON
+MPS_VSON-6_1x1.5mm_P0.5mm
+MPS  VSON, 6 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP21148/document_id/1006/#page=14), generated with kicad-footprint-generator ipc_noLead_generator.py
+MPS VSON NoLead
+0
+6
+6
+Package_SON
+MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm
+MicroCrystal C7 SON, 8 Pin (https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-3028-C7_App-Manual.pdf#page=107), generated with kicad-footprint-generator ipc_noLead_generator.py
+MicroCrystal SON NoLead MicroCrystal-RV3028-C7
+0
+8
+8
+Package_SON
+NXP_XSON-16
+http://www.nxp.com/documents/outline_drawing/SOT1341-1.pdf
+NXP XSON SOT-1341
+0
+16
+16
+Package_SON
+Nexperia_HUSON-8_USON-8-1EP_1.35x1.7mm_P0.4mm_EP0.4x1.2mm
+Nexperia HUSON-8 USON, 8 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Nexperia USON NoLead
+0
+10
+9
+Package_SON
+Nexperia_HUSON-12_USON-12-1EP_1.35x2.5mm_P0.4mm_EP0.4x2mm
+Nexperia HUSON-12 USON, 12 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Nexperia USON NoLead
+0
+14
+13
+Package_SON
+Nexperia_HUSON-16_USON-16-1EP_1.35x3.3mm_P0.4mm_EP0.4x2.8mm
+Nexperia HUSON-16 USON, 16 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Nexperia USON NoLead
+0
+18
+17
+Package_SON
+ROHM_VML0806
+VML0806, Rohm (http://rohmfs.rohm.com/en/techdata_basic/transistor/soldering_condition/VML0806_Soldering_Condition.pdf, http://rohmfs.rohm.com/en/products/databook/package/spec/discrete/vml0806_tr-e.pdf)
+ROHM VML0806
+0
+3
+3
+Package_SON
+RTC_SMD_MicroCrystal_C3_2.5x3.7mm
+MicroCrystal C3 2.5x3.7mm, https://www.microcrystal.com/fileadmin/Media/Products/RTC/Datasheet/RV-1805-C3.pdf
+RTC C3
+0
+10
+10
+Package_SON
+SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
+SON, 8 Pin (http://www.fujitsu.com/downloads/MICRO/fsa/pdf/products/memory/fram/MB85RS16-DS501-00014-6v0-E.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+SON NoLead
+0
+13
+9
+Package_SON
+ST_PowerFLAT-6L_5x6mm_P1.27mm
+Thermally-enhanced 5x6mm 6-pin package, https://www.st.com/resource/en/datasheet/stl40dn3llh5.pdf
+PowerFLAT5x6
+0
+10
+6
+Package_SON
+ST_PowerFLAT_HV-5_8x8mm
+High-Voltage 5-pin package, https://www.st.com/resource/en/datasheet/sctl35n65g2v.pdf
+PowerFLAT8x8
+0
+5
+5
+Package_SON
+ST_PowerFLAT_HV-8_5x6mm
+High-Voltage 8-pin package, https://www.st.com/resource/en/datasheet/sgt65r65al.pdf
+PowerFLAT5x6
+0
+17
+8
+Package_SON
+Texas_DPY0002A_0.6x1mm_P0.65mm
+X1SON 2 pin 0.6x1mm 0.375mm height package, https://www.ti.com/lit/ml/mpss034c/mpss034c.pdf, https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf
+X1SON
+0
+2
+2
+Package_SON
+Texas_DQK
+Texas WSON-6 DQK, http://www.ti.com/lit/ds/symlink/csd16301q2.pdf
+Texas WSON6 2x2mm
+0
+10
+8
+Package_SON
+Texas_DQX002A
+Texas DQX - 2pin WSON, 2.5x1.7mm body, 0.8mm height. https://www.ti.com/lit/ds/symlink/lmt01.pdf
+WSON-2 DQX
+0
+2
+2
+Package_SON
+Texas_DRC0010J
+Texas DRC0010J, VSON10 3x3mm Body, 0.5mm Pitch,  http://www.ti.com/lit/ds/symlink/tps63000.pdf
+Texas VSON10 3x3mm
+0
+17
+11
+Package_SON
+Texas_DRC0010J_ThermalVias
+Texas DRC0010J, VSON10 3x3mm Body, 0.5mm Pitch,  http://www.ti.com/lit/ds/symlink/tps63000.pdf
+Texas VSON10 3x3mm
+0
+21
+11
+Package_SON
+Texas_DRX_WSON-10_2.5x2.5mm_P0.5mm
+Texas DRX WSON, 10 Pin (https://www.ti.com/lit/ml/mpss105a/mpss105a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WSON NoLead
+0
+10
+10
+Package_SON
+Texas_DSC0010J
+3x3mm Body, 0.5mm Pitch, DSC0010J, WSON, http://www.ti.com/lit/ds/symlink/tps61201.pdf
+0.5 DSC0010J WSON
+0
+33
+11
+Package_SON
+Texas_DSC0010J_ThermalVias
+3x3mm Body, 0.5mm Pitch, DSC0010J, WSON, http://www.ti.com/lit/ds/symlink/tps61201.pdf
+0.5 DSC0010J WSON
+0
+39
+11
+Package_SON
+Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
+Texas DSG0008A WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WSON NoLead
+0
+11
+9
+Package_SON
+Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias
+Texas DSG0008A WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas WSON NoLead
+0
+14
+9
+Package_SON
+Texas_PWSON-N6
+Plastic Small Outline No-Lead http://www.ti.com/lit/ml/mpds176e/mpds176e.pdf
+Plastic Small Outline No-Lead
+0
+11
+7
+Package_SON
+Texas_R-PUSON-N8_USON-8-1EP_1.6x2.1mm_P0.5mm_EP0.4x1.7mm
+USON, 8 Pin (https://www.ti.com/lit/gpn/tpd3f303#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py
+USON NoLead
+0
+10
+9
+Package_SON
+Texas_R-PUSON-N14
+USON, 14 Pin (https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py
+USON NoLead
+0
+14
+14
+Package_SON
+Texas_R-PWSON-N12_EP0.4x2mm
+http://www.ti.com/lit/ds/symlink/tpd6f003.pdf
+WSON SMD
+0
+16
+13
+Package_SON
+Texas_S-PDSO-N12
+http://www.ti.com/lit/ds/symlink/bq27441-g1.pdf
+SON thermal pads
+0
+28
+13
+Package_SON
+Texas_S-PVSON-N8
+8-Lead Plastic VSON, 3x3mm Body, 0.65mm Pitch, S-PVSON-N8, http://www.ti.com/lit/ds/symlink/opa2333.pdf
+DFN 0.65 S-PVSON-N8
+0
+21
+9
+Package_SON
+Texas_S-PVSON-N8_ThermalVias
+8-Lead Plastic VSON, 3x3mm Body, 0.65mm Pitch, S-PVSON-N8, http://www.ti.com/lit/ds/symlink/opa2333.pdf
+DFN 0.65 S-PVSON-N8
+0
+27
+9
+Package_SON
+Texas_S-PVSON-N10
+3x3mm Body, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf
+0.5 S-PVSON-N10 DRC
+0
+33
+11
+Package_SON
+Texas_S-PVSON-N10_ThermalVias
+3x3mm Body, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf
+0.5 S-PVSON-N10 DRC
+0
+39
+11
+Package_SON
+Texas_S-PWSON-N8_EP1.2x2mm
+WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+11
+9
+Package_SON
+Texas_S-PWSON-N8_EP1.2x2mm_ThermalVias
+WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+18
+9
+Package_SON
+Texas_S-PWSON-N10
+3x3mm Body, 0.5mm Pitch, S-PWSON-N10, DSC, http://www.ti.com/lit/ds/symlink/tps63060.pdf
+0.5 S-PWSON-N10 DSC
+0
+41
+11
+Package_SON
+Texas_S-PWSON-N10_ThermalVias
+3x3mm Body, 0.5mm Pitch, S-PWSON-N10, DSC, http://www.ti.com/lit/ds/symlink/tps63060.pdf
+0.5 S-PWSON-N10 DSC
+0
+47
+11
+Package_SON
+Texas_USON-6_1x1.45mm_P0.5mm_SMD
+USON, 6 Pin (https://www.ti.com/lit/ds/symlink/sn74auc1g04.pdf#page=24), Solder Mask Defined
+USON NoLead DRY0006A
+0
+6
+6
+Package_SON
+Texas_VSON-HR-8_1.5x2mm_P0.5mm
+Texas  VSON-HR, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62823.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py
+Texas VSON-HR NoLead
+0
+8
+8
+Package_SON
+Texas_X2SON-4_1x1mm_P0.65mm
+X2SON 5 pin 1x1mm package, DQN0004A (Reference Datasheet: http://www.ti.com/lit/ds/sbvs193d/sbvs193d.pdf Reference part: TPS383x) [StepUp generated footprint]
+X2SON
+0
+13
+5
+Package_SON
+Texas_X2SON-5_0.8x0.8mm_P0.48mm
+X2SON 5 pin 0.8x0.8mm package (Reference Datasheet: https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=39 Reference part: SN74LVC1G17) [StepUp generated footprint]
+X2SON DPW0005A
+0
+9
+5
+Package_SON
+Texas_X2SON-5_0.8x0.8mm_P0.48mm_RoutingVia
+X2SON 5 pin 0.8x0.8mm package (Reference Datasheet: https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=39 Reference part: SN74LVC1G17) [StepUp generated footprint]
+X2SON DPW0005A
+0
+10
+5
+Package_SON
+USON-10_2.5x1.0mm_P0.5mm
+USON-10 2.5x1.0mm_ Pitch 0.5mm http://www.ti.com/lit/ds/symlink/tpd4e02b04.pdf
+USON-10 2.5x1.0mm Pitch 0.5mm
+0
+10
+10
+Package_SON
+USON-20_2x4mm_P0.4mm
+USON-20 2x4mm Pitch 0.4mm http://www.ti.com/lit/ds/symlink/txb0108.pdf
+USON-20 2x4mm Pitch 0.4mm
+0
+20
+20
+Package_SON
+VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
+VSON, 8 Pin (https://www.ti.com/lit/ds/symlink/thvd1450.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+11
+9
+Package_SON
+VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm
+VSON, 8 Pin (https://www.ti.com/lit/ds/symlink/tlv767-q1.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+11
+9
+Package_SON
+VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm_ThermalVias
+VSON, 8 Pin (https://www.ti.com/lit/ds/symlink/tlv767-q1.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+18
+9
+Package_SON
+VSON-8_1.5x2mm_P0.5mm
+VSON, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62840.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+8
+8
+Package_SON
+VSON-8_3.3x3.3mm_P0.65mm_NexFET
+8-Lead Plastic Dual Flat, No Lead Package (MF) - 3.3x3.3x1 mm Body [VSON] http://www.ti.com/lit/ds/symlink/csd87334q3d.pdf
+VSON 0.65
+0
+13
+5
+Package_SON
+VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm
+VSON, 10 Pin (http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd8314nuv-e.pdf (Page 20)), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+15
+11
+Package_SON
+VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm_ThermalVias
+VSON, 10 Pin (http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd8314nuv-e.pdf (Page 20)), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+18
+11
+Package_SON
+VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm
+VSON 10 Thermal on 11 3x3mm Pitch 0.5mm http://chip.tomsk.ru/chip/chipdoc.nsf/Package/D8A64DD165C2AAD9472579400024FC41!OpenDocument
+VSON 10 Thermal on 11 3x3mm Pitch 0.5mm
+0
+21
+11
+Package_SON
+VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias
+VSON 10 Thermal on 11 3x3mm Pitch 0.5mm http://chip.tomsk.ru/chip/chipdoc.nsf/Package/D8A64DD165C2AAD9472579400024FC41!OpenDocument
+VSON 10 Thermal on 11 3x3mm Pitch 0.5mm
+0
+27
+11
+Package_SON
+VSON-14-1EP_3x4.45mm_P0.65mm_EP1.6x4.2mm
+VSON, 14 Pin (https://www.ti.com/lit/ds/symlink/lp8868x-q1.pdf#page=45), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+17
+15
+Package_SON
+VSON-14-1EP_3x4.45mm_P0.65mm_EP1.6x4.2mm_ThermalVias
+VSON, 14 Pin (https://www.ti.com/lit/ds/symlink/lp8868x-q1.pdf#page=45), generated with kicad-footprint-generator ipc_noLead_generator.py
+VSON NoLead
+0
+24
+15
+Package_SON
+VSONP-8-1EP_5x6_P1.27mm
+SON, 8-Leads, Body 5x6x1mm, Pitch 1.27mm; (see Texas Instruments CSD18531Q5A http://www.ti.com/lit/ds/symlink/csd18531q5a.pdf)
+VSONP 1.27
+0
+13
+3
+Package_SON
+WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
+WSON, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+9
+7
+Package_SON
+WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias
+WSON, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+12
+7
+Package_SON
+WSON-6-1EP_3x3mm_P0.95mm
+WSON6 3*3 MM, 0.95 PITCH; http://www.ti.com/lit/ds/symlink/lmr62421.pdf
+WSON6 0.95
+0
+10
+7
+Package_SON
+WSON-6_1.5x1.5mm_P0.5mm
+WSON6, http://www.ti.com/lit/ds/symlink/tlv702.pdf
+WSON6_1.5x1.5mm_P0.5mm
+0
+6
+6
+Package_SON
+WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
+8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf
+WSON 8 1EP
+0
+11
+9
+Package_SON
+WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias
+8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf
+WSON 8 1EP ThermalVias
+0
+14
+9
+Package_SON
+WSON-8-1EP_3x2.5mm_P0.5mm_EP1.2x1.5mm_PullBack
+WSON, 8 Pin (http://www.ti.com/lit/ml/mpds400/mpds400.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_3x2.5mm_P0.5mm_EP1.2x1.5mm_PullBack_ThermalVias
+WSON, 8 Pin (http://www.ti.com/lit/ml/mpds400/mpds400.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+18
+9
+Package_SON
+WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm
+WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+11
+9
+Package_SON
+WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm_ThermalVias
+WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+18
+9
+Package_SON
+WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm
+8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf
+WSON 8 1EP
+0
+13
+9
+Package_SON
+WSON-8-1EP_3x3mm_P0.5mm_EP1.45x2.4mm
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/ina333.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+11
+9
+Package_SON
+WSON-8-1EP_3x3mm_P0.5mm_EP1.45x2.4mm_ThermalVias
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/ina333.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+18
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP1.98x3mm
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lm5017.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP1.98x3mm_ThermalVias
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lm5017.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP2.2x3mm
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2987.pdf#page=26), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP2.2x3mm_ThermalVias
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2987.pdf#page=26), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP2.6x3mm
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2951-n.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_4x4mm_P0.8mm_EP2.6x3mm_ThermalVias
+WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2951-n.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+9
+Package_SON
+WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm
+WSON, 8 Pin (http://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf (page 68)), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm
+WSON, 8 Pin (http://ww1.microchip.com/downloads/en/AppNotes/S72030.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
+WSON, 8 Pin (https://datasheet.lcsc.com/lcsc/2204011730_GigaDevice-Semicon-Beijing-GD5F1GQ4UFYIGR_C2986324.pdf (page 44)), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+9
+Package_SON
+WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm
+WSON, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+15
+11
+Package_SON
+WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalVias
+WSON, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+22
+11
+Package_SON
+WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm
+WSON, 10 Pin (https://www.ti.com/lit/ds/symlink/tps62177.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+13
+11
+Package_SON
+WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias
+WSON, 10 Pin (https://www.ti.com/lit/ds/symlink/tps62177.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+11
+Package_SON
+WSON-10-1EP_4x3mm_P0.5mm_EP2.2x2mm
+10-Lead Plastic WSON, 4x3mm Body, 0.5mm Pitch (http://www.ti.com/lit/ds/symlink/lm4990.pdf)
+WSON 0.5
+0
+15
+11
+Package_SON
+WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm
+WSON, 10 Pin (https://www.ti.com/lit/ml/mpss046b/mpss046b.pdf?ts=1728800628041&ref_url=https%253A%252F%252Fwww.ti.com%252Fpackaging%252Fdocs%252Fsearchtipackages.tsp%253FpackageName%253DSON), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+15
+11
+Package_SON
+WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm_ThermalVias
+WSON, 10 Pin (https://www.ti.com/lit/ml/mpss046b/mpss046b.pdf?ts=1728800628041&ref_url=https%253A%252F%252Fwww.ti.com%252Fpackaging%252Fdocs%252Fsearchtipackages.tsp%253FpackageName%253DSON), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+25
+11
+Package_SON
+WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65
+WSON-12 http://www.ti.com/lit/ds/symlink/lm27762.pdf
+WSON-12
+0
+15
+13
+Package_SON
+WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias
+WSON-12 http://www.ti.com/lit/ds/symlink/lm27762.pdf
+WSON-12
+0
+19
+13
+Package_SON
+WSON-12-1EP_3x3mm_P0.5mm_EP1.5x2.5mm
+WSON, 12 Pin (https://www.ti.com/lit/ds/symlink/tps63710.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+13
+Package_SON
+WSON-12-1EP_3x3mm_P0.5mm_EP1.5x2.5mm_ThermalVias
+WSON, 12 Pin (https://www.ti.com/lit/ds/symlink/tps63710.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+24
+13
+Package_SON
+WSON-12-1EP_4x4mm_P0.5mm_EP2.6x3mm
+WSON, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+17
+13
+Package_SON
+WSON-12-1EP_4x4mm_P0.5mm_EP2.6x3mm_ThermalVias
+WSON, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py
+WSON NoLead
+0
+27
+13
+Package_SON
+WSON-14-1EP_4.0x4.0mm_P0.5mm_EP2.6x2.6mm
+14-Lead Plastic Dual Flat, No Lead Package - 4.0x4.0x0.8 mm Body [WSON], http://www.ti.com/lit/ml/mpds421/mpds421.pdf
+NHL014B
+0
+19
+15
+Package_SON
+WSON-16_3.3x1.35_P0.4mm
+WSON-16 3.3 x 1.35mm  Pitch 0.4mm http://www.chip.tomsk.ru/chip/chipdoc.nsf/Package/C67E729A4D6C883A4725793E004C8739!OpenDocument
+WSON-16 3.3 x 1.35mm  Pitch 0.4mm
+0
+20
+17
+Package_SON
+Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm
+Winbond  USON, 8 Pin (https://www.lcsc.com/datasheet/lcsc_datasheet_2205122030_Winbond-Elec-W25Q16JVUXIQ_C2843335.pdf#page=66f), generated with kicad-footprint-generator ipc_noLead_generator.py
+Winbond USON NoLead
+0
+10
+9
+Package_SON
+Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mm
+Winbond  USON, 8 Pin (https://www.winbond.com/hq/support/documentation/levelOne.jsp?__locale=en&DocNo=DA00-W25Q16JV.1#page=69), generated with kicad-footprint-generator ipc_noLead_generator.py
+Winbond USON NoLead
+0
+10
+9
+Package_SON
+X2SON-8_1.4x1mm_P0.35mm
+X2SON-8 1.4x1mm Pitch0.35mm http://www.ti.com/lit/ds/symlink/pca9306.pdf
+X2SON-8 1.4x1mm Pitch0.35mm
+0
+8
+8
+Package_SO_J-Lead
+TSOC-6_3.76x3.94mm_P1.27mm
+Maxim Integrated TSOC-6 D6+1,https://datasheets.maximintegrated.com/en/ds/DS2401.pdf, https://pdfserv.maximintegrated.com/land_patterns/90-0321.PDF
+TSOC-6
+0
+6
+6
+Package_TO_SOT_SMD
+ATPAK-2
+ATPAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF
+ATPAK 
+0
+7
+3
+Package_TO_SOT_SMD
+Analog_KS-4
+Analog Devices KS-4, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sc70ks/ks_4.pdf
+Analog Devices KS-4 (like EIAJ SC-82)
+0
+4
+4
+Package_TO_SOT_SMD
+Diodes_SOT-553
+Diodes SOT-553, https://www.diodes.com/assets/Package-Files/SOT553.pdf
+SOT-553
+0
+5
+5
+Package_TO_SOT_SMD
+HVSOF5
+HVSOF5, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hvsof5_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/hall/bu52001gul-e.pdf
+HVSOF5
+0
+5
+5
+Package_TO_SOT_SMD
+HVSOF6
+HVSOF6, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hvsof6_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/audio_video/video_amplifier/bh76106hfv-e.pdf
+HVSOF6
+0
+7
+7
+Package_TO_SOT_SMD
+Infineon_PG-HDSOP-10-1
+Infineon PG-HDSOP-10-1 (DDPAK), 20.96x6.5x2.3mm, slug up (https://www.infineon.com/cms/en/product/packages/PG-HDSOP/PG-HDSOP-10-1/)
+hdsop 10 ddpak
+0
+10
+10
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-1
+HSOF-8-1 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-1/)
+mosfet hsof toll
+0
+53
+3
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-1_ThermalVias
+HSOF-8-1 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-1/)
+mosfet hsof toll thermal vias
+0
+96
+3
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-2
+HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/)
+mosfet hsof toll
+0
+12
+4
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-2_ThermalVias
+HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/)
+mosfet hsof toll thermal vias
+0
+97
+4
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-2_ThermalVias2
+HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/, https://www.infineon.com/dgdl/Infineon-ApplicationNote_600V_CoolMOS_C7_Gold_TOLL-AN-v01_00-EN.pdf?fileId=5546d4625b10283a015b144a1af70df6)
+mosfet hsof toll thermal vias
+0
+159
+4
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-3
+HSOF-8-3 power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-3/)
+mosfet hsof
+0
+25
+4
+Package_TO_SOT_SMD
+Infineon_PG-HSOF-8-3_ThermalVias
+HSOF-8-3 power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-3/)
+mosfet hsof
+0
+64
+4
+Package_TO_SOT_SMD
+Infineon_PG-TO-220-7Lead_TabPin8
+Infineon PG-TO-220-7, Tab as Pin 8, see e.g. https://www.infineon.com/dgdl/Infineon-BTS50055-1TMC-DS-v01_00-EN.pdf?fileId=5546d4625a888733015aa9b0007235e9
+Infineon PG-TO-220-7
+0
+12
+8
+Package_TO_SOT_SMD
+Infineon_PG-TSFP-3-1
+Infineon_PG-TSFP-3-1, https://www.infineon.com/dgdl/TSFP-3-1,-2-Package_Overview.pdf?fileId=db3a30431936bc4b0119539929863d46
+TSFP-3
+0
+3
+3
+Package_TO_SOT_SMD
+LFPAK33
+LFPAK33 SOT-1210 https://assets.nexperia.com/documents/outline-drawing/SOT1210.pdf
+LFPAK33 SOT-1210
+0
+17
+5
+Package_TO_SOT_SMD
+LFPAK56
+LFPAK56 https://assets.nexperia.com/documents/outline-drawing/SOT669.pdf
+LFPAK56 SOT-669 Power-SO8
+0
+18
+5
+Package_TO_SOT_SMD
+LFPAK88
+LFPAK88 PowerPAK 8 x 8L BWL Single SOT-1235 (https://assets.nexperia.com/documents/package-information/SOT1235.pdf)
+PowerPAK 8x8L Nexperia Vishay
+0
+19
+5
+Package_TO_SOT_SMD
+Nexperia_CFP15_SOT-1289
+Nexperia CFP15 (SOT-1289), https://assets.nexperia.com/documents/outline-drawing/SOT1289.pdf
+SOT-1289 CFP15
+0
+8
+3
+Package_TO_SOT_SMD
+OnSemi_ECH8
+On Semiconductor ECH8, https://www.onsemi.com/pub/Collateral/318BF.PDF
+ECH8 SOT28-FL SOT-28-FL
+0
+8
+8
+Package_TO_SOT_SMD
+PQFN_8x8
+Low Profile 8x8mm PQFN, Dual Cool 88, https://www.onsemi.com/pub/Collateral/FDMT80080DC-D.pdf
+pqfn vdfn mosfet
+0
+9
+3
+Package_TO_SOT_SMD
+PowerMacro_M234_NoHole
+TO-50-4 Power Macro Package Style M234
+TO-50-4 Power Macro Package Style M234
+0
+4
+4
+Package_TO_SOT_SMD
+PowerMacro_M234_WithHole
+TO-50-4 Power Macro Package Style M234
+TO-50-4 Power Macro Package Style M234
+0
+4
+4
+Package_TO_SOT_SMD
+ROHM_SOT-457_ClockwisePinNumbering
+ROHM SOT-457 SC-74, 6 Pin (https://fscdn.rohm.com/en/products/databook/datasheet/discrete/transistor/digital/imh3at110-e.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+ROHM SC-74 TO_SOT_SMD
+0
+6
+6
+Package_TO_SOT_SMD
+Rohm_HRP7
+Rohm HRP7 SMD package, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hrp7_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/motor/dc/bd621x-e.pdf
+Rohm HRP7 SMD
+0
+69
+7
+Package_TO_SOT_SMD
+SC-59
+SC-59, https://lib.chipdip.ru/images/import_diod/original/SOT-23_SC-59.jpg
+SC-59
+0
+3
+3
+Package_TO_SOT_SMD
+SC-59_Handsoldering
+SC-59, hand-soldering varaint, https://lib.chipdip.ru/images/import_diod/original/SOT-23_SC-59.jpg
+SC-59 hand-soldering
+0
+3
+3
+Package_TO_SOT_SMD
+SC-70-8
+SC70-8
+SC70-8
+0
+8
+8
+Package_TO_SOT_SMD
+SC-70-8_Handsoldering
+SC70-8, Handsoldering
+SC70-8 Handsoldering
+0
+8
+8
+Package_TO_SOT_SMD
+SC-74-6_1.55x2.9mm_P0.95mm
+SC-74, 6 Pin (https://www.jeita.or.jp/japanese/standard/book/ED-7500B/#target/page_no=39), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SC-74 TO_SOT_SMD
+0
+6
+6
+Package_TO_SOT_SMD
+SC-74A-5_1.55x2.9mm_P0.95mm
+SC-74A, 5 Pin (https://www.jeita.or.jp/japanese/standard/book/ED-7500B/#target/page_no=41), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SC-74A TO_SOT_SMD
+0
+5
+5
+Package_TO_SOT_SMD
+SC-82AA
+SC-82AA
+SC-82AA
+0
+4
+4
+Package_TO_SOT_SMD
+SC-82AA_Handsoldering
+SC-82AA
+SC-82AA
+0
+4
+4
+Package_TO_SOT_SMD
+SC-82AB
+SC-82AB
+SC-82AB
+0
+4
+4
+Package_TO_SOT_SMD
+SC-82AB_Handsoldering
+SC-82AB
+SC-82AB
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-23
+SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-23-3
+SOT, 3 Pin (JEDEC MO-178 inferred 3-pin variant https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-23-5
+SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-23-5_HandSoldering
+5-pin SOT23 package
+SOT-23-5 hand-soldering
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-23-6
+SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-23-6_Handsoldering
+6-pin SOT-23 package, Handsoldering
+SOT-23-6 Handsoldering
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-23-8
+SOT, 8 Pin (JEDEC MO-178 Var BA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD
+0
+8
+8
+Package_TO_SOT_SMD
+SOT-23-8_Handsoldering
+8-pin SOT-23 package, Handsoldering, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sot-23rj/rj_8.pdf
+SOT-23-8 Handsoldering
+0
+8
+8
+Package_TO_SOT_SMD
+SOT-23W
+SOT-23W http://www.allegromicro.com/~/media/Files/Datasheets/A112x-Datasheet.ashx?la=en&hash=7BC461E058CC246E0BAB62433B2F1ECA104CA9D3
+SOT-23W
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-23W_Handsoldering
+SOT-23W http://www.allegromicro.com/~/media/Files/Datasheets/A112x-Datasheet.ashx?la=en&hash=7BC461E058CC246E0BAB62433B2F1ECA104CA9D3
+SOT-23W for handsoldering
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-23_Handsoldering
+SOT-23, Handsoldering
+SOT-23
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-89-3
+SOT-89-3, http://ww1.microchip.com/downloads/en/DeviceDoc/3L_SOT-89_MB_C04-029C.pdf
+SOT-89-3
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-89-3_Handsoldering
+SOT-89-3 Handsoldering
+SOT-89-3 Handsoldering
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-89-5
+SOT-89-5, http://www.e-devices.ricoh.co.jp/en/products/product_power/pkg/sot-89-5.pdf
+SOT-89-5
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-89-5_Handsoldering
+SOT-89-5, http://www.e-devices.ricoh.co.jp/en/products/product_power/pkg/sot-89-5.pdf
+SOT-89-5
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-143
+SOT-143 https://www.nxp.com/docs/en/package-information/SOT143B.pdf
+SOT-143
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-143R
+SOT-143R, reverse pinning, https://www.nxp.com/docs/en/package-information/SOT143R.pdf
+SOT-143R Reverse
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-143R_Handsoldering
+SOT-143R, reverse pinning, Handsoldering, https://www.nxp.com/docs/en/package-information/SOT143R.pdf
+SOT-143 Reverse Handsoldering
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-143_Handsoldering
+SOT-143 Handsoldering https://www.nxp.com/docs/en/package-information/SOT143B.pdf
+SOT-143 Handsoldering
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-223
+module CMS SOT223 4 pins
+CMS SOT
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-223-3_TabPin2
+module CMS SOT223 4 pins
+CMS SOT
+0
+4
+3
+Package_TO_SOT_SMD
+SOT-223-5
+module CMS SOT223 5 pins, http://ww1.microchip.com/downloads/en/DeviceDoc/51751a.pdf
+CMS SOT
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-223-6
+module CMS SOT223 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf
+CMS SOT
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-223-6_TabPin3
+module CMS SOT223 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf
+CMS SOT
+0
+6
+5
+Package_TO_SOT_SMD
+SOT-223-8
+module CMS SOT223 8 pins, https://www.diodes.com/assets/Datasheets/ZXSBMR16PT8.pdf
+CMS SOT
+0
+8
+8
+Package_TO_SOT_SMD
+SOT-323_SC-70
+SOT-323, SC-70
+SOT-323 SC-70
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-323_SC-70_Handsoldering
+SOT-323, SC-70 Handsoldering
+SOT-323 SC-70 Handsoldering
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-343_SC-70-4
+SOT-343, SC-70-4
+SOT-343 SC-70-4
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-343_SC-70-4_Handsoldering
+SOT-343, SC-70-4, Handsoldering
+SOT-343 SC-70-4 Handsoldering
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-353_SC-70-5
+SOT-353, SC-70-5
+SOT-353 SC-70-5
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-353_SC-70-5_Handsoldering
+SOT-353, SC-70-5, Handsoldering
+SOT-353 SC-70-5 Handsoldering
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-363_SC-70-6
+SOT-363, SC-70-6, SC-88
+SOT-363 SC-70-6 SC-88
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-363_SC-70-6_Handsoldering
+SOT-363, SC-70-6, SC-88, Handsoldering
+SOT-363 SC-70-6 SC-88 Handsoldering
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-383F
+8-pin SOT-383F, http://www.mouser.com/ds/2/80/CPDVR085V0C-HF-RevB-10783.pdf
+SOT-383F
+0
+9
+9
+Package_TO_SOT_SMD
+SOT-383FL
+8-pin SOT-383FL package, http://www.onsemi.com/pub_link/Collateral/ENA2267-D.PDF
+SOT-383FL
+0
+8
+8
+Package_TO_SOT_SMD
+SOT-416
+SOT-416, https://www.nxp.com/docs/en/package-information/SOT416.pdf
+SOT-416
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-523
+SOT523, https://www.diodes.com/assets/Package-Files/SOT523.pdf
+SOT-523
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-543
+SOT-543 4 lead surface package
+SOT-543 SC-107A EMD4
+0
+4
+4
+Package_TO_SOT_SMD
+SOT-553
+SOT, 5 Pin (https://www.jedec.org/system/files/docs/MO-293B.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD JEDEC-MO-293-UAAD-1 Texas-DRL-5
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-563
+SOT, 6 Pin (https://www.jedec.org/system/files/docs/MO-293B.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+SOT TO_SOT_SMD JEDEC-MO-293-UAAD Texas-DRL-6
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-583-8
+https://www.ti.com/lit/ds/symlink/tps62933.pdf
+SOT-583-8
+0
+8
+8
+Package_TO_SOT_SMD
+SOT-665
+SOT665
+SOT-665
+0
+5
+5
+Package_TO_SOT_SMD
+SOT-666
+SOT666
+SOT-666
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-723
+http://toshiba.semicon-storage.com/info/docget.jsp?did=5879&prodName=RN1104MFV
+sot 723
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-883
+SOT-883, https://assets.nexperia.com/documents/outline-drawing/SOT883.pdf
+SOT-883
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-886
+SOT-886
+SOT-886
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-963
+SOT 963 6 pins package 1x0.8mm pitch 0.35mm
+SOT 963 6 pins package 1x0.8mm pitch 0.35mm
+0
+6
+6
+Package_TO_SOT_SMD
+SOT-1123
+SOT-1123 small outline transistor (see http://www.onsemi.com/pub/Collateral/NST3906F3-D.PDF)
+SOT-1123 transistor
+0
+3
+3
+Package_TO_SOT_SMD
+SOT-1333-1
+SOT-1333-1 
+SOT-1333-1 
+0
+9
+9
+Package_TO_SOT_SMD
+SOT-1334-1
+SOT-1334-1
+SOT-1334-1
+0
+14
+14
+Package_TO_SOT_SMD
+SuperSOT-3
+3-pin SuperSOT package https://www.fairchildsemi.com/package-drawings/MA/MA03B.pdf
+SuperSOT-3 SSOT-3
+0
+3
+3
+Package_TO_SOT_SMD
+SuperSOT-6
+6-pin SuperSOT package http://www.mouser.com/ds/2/149/FMB5551-889214.pdf
+SuperSOT-6 SSOT-6
+0
+6
+6
+Package_TO_SOT_SMD
+SuperSOT-8
+8-pin SuperSOT package, http://www.icbank.com/icbank_data/semi_package/ssot8_dim.pdf
+SuperSOT-8 SSOT-8
+0
+8
+8
+Package_TO_SOT_SMD
+TDSON-8-1
+Power MOSFET package, TDSON-8-1, 5.15x5.9mm (https://www.infineon.com/cms/en/product/packages/PG-TDSON/PG-TDSON-8-1/)
+tdson 
+0
+14
+5
+Package_TO_SOT_SMD
+TO-50-3_LongPad-NoHole_Housing
+TO-50-3 Macro T Package Style M236
+TO-50-3 Macro T Package Style M236
+0
+3
+3
+Package_TO_SOT_SMD
+TO-50-3_LongPad-WithHole_Housing
+TO-50-3 Macro T Package Style M236
+TO-50-3 Macro T Package Style M236
+0
+3
+3
+Package_TO_SOT_SMD
+TO-50-3_ShortPad-NoHole_Housing
+TO-50-3 Macro T Package Style M236
+TO-50-3 Macro T Package Style M236
+0
+3
+3
+Package_TO_SOT_SMD
+TO-50-3_ShortPad-WithHole_Housing
+TO-50-3 Macro T Package Style M236
+TO-50-3 Macro T Package Style M236
+0
+3
+3
+Package_TO_SOT_SMD
+TO-50-4_LongPad-NoHole_Housing
+TO-50-4 Macro X Package Style M238
+TO-50-4 Macro X Package Style M238
+0
+4
+4
+Package_TO_SOT_SMD
+TO-50-4_LongPad-WithHole_Housing
+TO-50-4 Macro X Package Style M238
+TO-50-4 Macro X Package Style M238
+0
+4
+4
+Package_TO_SOT_SMD
+TO-50-4_ShortPad-NoHole_Housing
+TO-50-4 Macro X Package Style M238
+TO-50-4 Macro X Package Style M238
+0
+4
+4
+Package_TO_SOT_SMD
+TO-50-4_ShortPad-WithHole_Housing
+TO-50-4 Macro X Package Style M238
+TO-50-4 Macro X Package Style M238
+0
+4
+4
+Package_TO_SOT_SMD
+TO-252-2
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/
+DPAK TO-252 DPAK-3 TO-252-3 SOT-428
+0
+7
+3
+Package_TO_SOT_SMD
+TO-252-2_TabPin1
+TO-252-2, tab to pin 1 https://www.wolfspeed.com/media/downloads/87/CSD01060.pdf
+TO-252-2 diode
+0
+7
+2
+Package_TO_SOT_SMD
+TO-252-3_TabPin2
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/
+DPAK TO-252 DPAK-3 TO-252-3 SOT-428
+0
+8
+3
+Package_TO_SOT_SMD
+TO-252-3_TabPin4
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/
+DPAK TO-252 DPAK-3 TO-252-3 SOT-428
+0
+8
+4
+Package_TO_SOT_SMD
+TO-252-4
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/
+DPAK TO-252 DPAK-5 TO-252-5
+0
+9
+5
+Package_TO_SOT_SMD
+TO-252-5_TabPin3
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/
+DPAK TO-252 DPAK-5 TO-252-5
+0
+10
+5
+Package_TO_SOT_SMD
+TO-252-5_TabPin6
+TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/
+DPAK TO-252 DPAK-5 TO-252-5
+0
+10
+6
+Package_TO_SOT_SMD
+TO-263-2
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/
+D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404
+0
+7
+3
+Package_TO_SOT_SMD
+TO-263-2_TabPin1
+TO-263 / D2PAK / DDPAK SMD package, tab to pin 1, https://www.wolfspeed.com/media/downloads/137/C3D06060G.pdf
+D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 diode
+0
+7
+2
+Package_TO_SOT_SMD
+TO-263-3_TabPin2
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/
+D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404
+0
+8
+3
+Package_TO_SOT_SMD
+TO-263-3_TabPin4
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/
+D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404
+0
+8
+4
+Package_TO_SOT_SMD
+TO-263-4
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/
+D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426
+0
+9
+5
+Package_TO_SOT_SMD
+TO-263-5_TabPin3
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/
+D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426
+0
+10
+5
+Package_TO_SOT_SMD
+TO-263-5_TabPin6
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/
+D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426
+0
+10
+6
+Package_TO_SOT_SMD
+TO-263-6
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/
+D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427
+0
+11
+7
+Package_TO_SOT_SMD
+TO-263-7_TabPin4
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/
+D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427
+0
+12
+7
+Package_TO_SOT_SMD
+TO-263-7_TabPin8
+TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/
+D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427
+0
+12
+8
+Package_TO_SOT_SMD
+TO-263-9_TabPin5
+TO-263 / D2PAK / DDPAK SMD package, http://www.ti.com/lit/ds/symlink/lm4755.pdf
+D2PAK DDPAK TO-263 D2PAK-9 TO-263-9
+0
+14
+9
+Package_TO_SOT_SMD
+TO-263-9_TabPin10
+TO-263 / D2PAK / DDPAK SMD package, http://www.ti.com/lit/ds/symlink/lm4755.pdf
+D2PAK DDPAK TO-263 D2PAK-9 TO-263-9
+0
+14
+10
+Package_TO_SOT_SMD
+TO-268-2
+TO-268/D3PAK SMD package, http://www.icbank.com/icbank_data/semi_package/to268aa_dim.pdf
+D3PAK TO-268 D3PAK-3 TO-268-3
+0
+7
+3
+Package_TO_SOT_SMD
+TO-269AA
+SMD package TO-269AA (e.g. diode bridge), see http://www.vishay.com/docs/88854/padlayouts.pdf
+TO-269AA MBS diode bridge
+0
+4
+4
+Package_TO_SOT_SMD
+TO-277A
+Thermal enhanced ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm, https://www.vishay.com/docs/95570/to-277asmpc.pdf
+TO-277A SMPC
+0
+12
+3
+Package_TO_SOT_SMD
+TO-277B
+TO-227B https://media.digikey.com/pdf/Data%20Sheets/Littelfuse%20PDFs/DST2050S.pdf
+TO-277B
+0
+9
+3
+Package_TO_SOT_SMD
+TSOT-23
+3-pin TSOT23 package, http://www.analog.com.tw/pdf/All_In_One.pdf
+TSOT-23
+0
+3
+3
+Package_TO_SOT_SMD
+TSOT-23-5
+TSOT, 5 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOT TO_SOT_SMD
+0
+5
+5
+Package_TO_SOT_SMD
+TSOT-23-5_HandSoldering
+5-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf
+TSOT-23-5 Hand-soldering
+0
+5
+5
+Package_TO_SOT_SMD
+TSOT-23-6
+TSOT, 6 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOT TO_SOT_SMD
+0
+6
+6
+Package_TO_SOT_SMD
+TSOT-23-6_HandSoldering
+6-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_6_05-08-1636.pdf
+TSOT-23-6 MK06A TSOT-6 Hand-soldering
+0
+6
+6
+Package_TO_SOT_SMD
+TSOT-23-8
+TSOT, 8 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant BA), generated with kicad-footprint-generator ipc_gullwing_generator.py
+TSOT TO_SOT_SMD
+0
+8
+8
+Package_TO_SOT_SMD
+TSOT-23-8_HandSoldering
+8-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_8_05-08-1637.pdf
+TSOT-23-8 Hand-soldering
+0
+8
+8
+Package_TO_SOT_SMD
+TSOT-23_HandSoldering
+5-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf
+TSOT-23 Hand-soldering
+0
+3
+3
+Package_TO_SOT_SMD
+Texas_DDF0008A_SOT-8_1.6x2.9mm_P0.65mm
+Texas DDF0008A SOT, 8 Pin (https://www.ti.com/lit/ds/symlink/mspm0c1104.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Texas SOT TO_SOT_SMD
+0
+8
+8
+Package_TO_SOT_SMD
+Texas_DRT-3
+Texas Instrument DRT-3 1x0.8mm Pitch 0.7mm http://www.ti.com/lit/ds/symlink/tpd2eusb30.pdf
+DRT-3 1x0.8mm Pitch 0.7mm
+0
+3
+3
+Package_TO_SOT_SMD
+Texas_NDQ
+Texas Instruments, NDQ, 5 pin (https://www.ti.com/lit/ml/mmsf022/mmsf022.pdf)
+ti pfm dap
+0
+6
+6
+Package_TO_SOT_SMD
+Texas_NDW-7_TabPin4
+NDW0007A SMD package, http://www.ti.com/lit/ml/mmsf024/mmsf024.pdf
+NDW NDW
+0
+12
+7
+Package_TO_SOT_SMD
+Texas_NDW-7_TabPin8
+NDW0007A SMD package, http://www.ti.com/lit/ml/mmsf024/mmsf024.pdf
+NDW NDW
+0
+12
+8
+Package_TO_SOT_SMD
+Texas_NDY0011A
+TO-PMOD-11 11-pin switching regulator package, http://www.ti.com/lit/ml/mmsf025/mmsf025.pdf
+Texas TO-PMOD NDY00011A
+0
+12
+12
+Package_TO_SOT_SMD
+Texas_R-PDSO-G5_DCK-5
+DCK R-PDSO-G5, JEDEC MO-203C Var AA, https://www.ti.com/lit/ds/symlink/tmp20.pdf#page=23
+DCK R-PDSO-G5 MO-203C
+0
+5
+5
+Package_TO_SOT_SMD
+Texas_R-PDSO-G6
+R-PDSO-G6, http://www.ti.com/lit/ds/slis144b/slis144b.pdf
+R-PDSO-G6 SC-70-6
+0
+6
+6
+Package_TO_SOT_SMD
+Texas_R-PDSO-N5_DRL-5
+R-PDSO-N5, DRL, JEDEC MO-293B Var UAAD-1, https://www.ti.com/lit/ml/mpds158d/mpds158d.pdf
+SOT R-PDSO-N5 DRL
+0
+5
+5
+Package_TO_SOT_SMD
+Texas_R-PDSO-N6_DRL-6
+R-PDSO-N6, DRL, similar to JEDEC MO-293B Var UAAD (but not the same) , https://www.ti.com/lit/pdf/mpds159f
+SOT R-PDSO-N6 DRL
+0
+6
+6
+Package_TO_SOT_SMD
+VSOF5
+VSOF5
+VSOF5
+0
+5
+5
+Package_TO_SOT_SMD
+Vishay_PowerPAK_SC70-6L_Dual
+Vishay PowerPAK SC70 dual transistor package http://www.vishay.com/docs/70487/70487.pdf
+powerpak sc70 sc-70 dual
+0
+8
+6
+Package_TO_SOT_SMD
+Vishay_PowerPAK_SC70-6L_Single
+Vishay PowerPAK SC70 single transistor package http://www.vishay.com/docs/70486/70486.pdf
+powerpak sc70 sc-70
+0
+6
+3
+Package_TO_SOT_THT
+Analog_TO-46-4_ThermalShield
+TO-46-4 with Valox case, based on https://www.analog.com/media/en/technical-documentation/data-sheets/199399fc.pdf
+TO-46-4 LM399
+0
+4
+4
+Package_TO_SOT_THT
+Fairchild_TO-220F-6L
+Fairchild TO-220F-6L, http://www.mouser.com/ds/2/149/FSL136MRT-113334.pdf
+Fairchild TO-220F-6L
+0
+6
+6
+Package_TO_SOT_THT
+Heraeus_TO-92-2
+TO-92 2-pin variant by Heraeus, drill 0.75mm (http://www.produktinfo.conrad.com/datenblaetter/175000-199999/181293-da-01-de-TO92_Temperatursensor_PT1000_32209225.pdf)
+to-92
+0
+2
+2
+Package_TO_SOT_THT
+NEC_Molded_7x4x9mm
+Molded Japan Transistor Package 7x4x9mm^3, http://rtellason.com/transdata/2sb734.pdf
+Japan transistor
+0
+3
+3
+Package_TO_SOT_THT
+PowerIntegrations_TO-220-7C
+Non Isolated Modified TO-220 7pin Package, see http://www.farnell.com/datasheets/5793.pdf
+Power Integration Y Package
+0
+6
+6
+Package_TO_SOT_THT
+SIPAK-1EP_Horizontal_TabDown
+SIPAK, Horizontal, RM 2.286mm, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+SIPAK Horizontal RM 2.286mm
+0
+4
+4
+Package_TO_SOT_THT
+SIPAK_Vertical
+SIPAK, Vertical, RM 2.286mm, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+SIPAK Vertical RM 2.286mm
+0
+3
+3
+Package_TO_SOT_THT
+SOD-70_P2.54mm
+Plastic near cylindrical package Sod-70 see: https://www.nxp.com/docs/en/data-sheet/KTY81_SER.pdf  [StepUp generated footprint]
+Sod-70
+0
+2
+2
+Package_TO_SOT_THT
+SOD-70_P5.08mm
+Plastic near cylindrical package Sod-70 see: https://www.nxp.com/docs/en/data-sheet/KTY81_SER.pdf  [StepUp generated footprint]
+Sod-70
+0
+2
+2
+Package_TO_SOT_THT
+SOT-227
+SOT-227 / SOT-227B / ISOTOP, M4 mounting screws (https://www.vishay.com/docs/95423/sot227g2.pdf, https://www.vishay.com/docs/95793/vs-fc420sa10.pdf)
+sot 227 isotop
+0
+8
+4
+Package_TO_SOT_THT
+TO-3
+Transistor TO-3
+TR TO-3 TO3 TO-204
+0
+4
+3
+Package_TO_SOT_THT
+TO-3P-3_Horizontal_TabDown
+TO-3P-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3P-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-3P-3_Horizontal_TabUp
+TO-3P-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3P-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-3P-3_Vertical
+TO-3P-3, Vertical, RM 5.45mm, see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3P-3 Vertical RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-3PB-3_Horizontal_TabDown
+TO-3PB-3, Horizontal, RM 5.45mm, see http://www.onsemi.com/pub/Collateral/340AC.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3PB-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-3PB-3_Horizontal_TabUp
+TO-3PB-3, Horizontal, RM 5.45mm, see http://www.onsemi.com/pub/Collateral/340AC.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3PB-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-3PB-3_Vertical
+TO-3PB-3, Vertical, RM 5.45mm, see http://www.onsemi.com/pub/Collateral/340AC.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-3PB-3 Vertical RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-5-2
+TO-5-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-5-2_Window
+TO-5-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-5-3
+TO-5-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-5-3_Window
+TO-5-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-5-4
+TO-5-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-5-4_Window
+TO-5-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-5-6
+TO-5-6, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-6
+0
+6
+6
+Package_TO_SOT_THT
+TO-5-6_Window
+TO-5-6, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-6 Window
+0
+6
+6
+Package_TO_SOT_THT
+TO-5-8
+TO-5-8, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-8
+0
+8
+8
+Package_TO_SOT_THT
+TO-5-8_PD5.08
+TO-5-8_PD5.08, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-8_PD5.08
+0
+8
+8
+Package_TO_SOT_THT
+TO-5-8_PD5.08_Window
+TO-5-8_PD5.08, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-8_PD5.08 Window
+0
+8
+8
+Package_TO_SOT_THT
+TO-5-8_Window
+TO-5-8, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-8 Window
+0
+8
+8
+Package_TO_SOT_THT
+TO-5-10
+TO-5-10, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-10
+0
+10
+10
+Package_TO_SOT_THT
+TO-5-10_Window
+TO-5-10, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-5-10 Window
+0
+10
+10
+Package_TO_SOT_THT
+TO-8-2
+TO-8-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-8-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-8-2_Window
+TO-8-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-8-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-8-3
+TO-8-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-8-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-8-3_Window
+TO-8-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-8-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-11-2
+TO-11-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-11-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-11-2_Window
+TO-11-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-11-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-11-3
+TO-11-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-11-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-11-3_Window
+TO-11-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-11-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-12-4
+TO-12-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-12-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-12-4_Window
+TO-12-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-12-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-17-4
+TO-17-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-17-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-17-4_Window
+TO-17-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-17-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-18-2
+TO-18-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-18-2_Lens
+TO-18-2, Lens, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-2 Lens
+0
+2
+2
+Package_TO_SOT_THT
+TO-18-2_Window
+TO-18-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-18-3
+TO-18-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-18-3_Lens
+TO-18-3, Lens, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-3 Lens
+0
+3
+3
+Package_TO_SOT_THT
+TO-18-3_Window
+TO-18-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-18-4
+TO-18-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-18-4_Lens
+TO-18-4, Lens, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-4 Lens
+0
+4
+4
+Package_TO_SOT_THT
+TO-18-4_Window
+TO-18-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-18-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-33-4
+TO-33-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-33-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-33-4_Window
+TO-33-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-33-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-38-2
+TO-38-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-38-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-38-2_Window
+TO-38-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-38-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-38-3
+TO-38-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-38-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-38-3_Window
+TO-38-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-38-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-39-2
+TO-39-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-39-2_Window
+TO-39-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-39-3
+TO-39-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-39-3_Window
+TO-39-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-39-4
+TO-39-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-39-4_Window
+TO-39-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-39-6
+TO-39-6, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-6
+0
+6
+6
+Package_TO_SOT_THT
+TO-39-6_Window
+TO-39-6, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-6 Window
+0
+6
+6
+Package_TO_SOT_THT
+TO-39-8
+TO-39-8, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-8
+0
+8
+8
+Package_TO_SOT_THT
+TO-39-8_Window
+TO-39-8, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-8 Window
+0
+8
+8
+Package_TO_SOT_THT
+TO-39-10
+TO-39-10, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-10
+0
+10
+10
+Package_TO_SOT_THT
+TO-39-10_Window
+TO-39-10, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-39-10 Window
+0
+10
+10
+Package_TO_SOT_THT
+TO-46-2
+TO-46-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-46-2_Pin2Center
+TO-46-2, Pin2 at center of package, Thorlabs photodiodes
+TO-46-2 Thorlabs
+0
+2
+2
+Package_TO_SOT_THT
+TO-46-2_Pin2Center_Window
+TO-46-2, Pin2 at center of package, Thorlabs photodiodes
+TO-46-2 Thorlabs
+0
+2
+2
+Package_TO_SOT_THT
+TO-46-2_Window
+TO-46-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-46-3
+TO-46-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-46-3_Pin2Center
+TO-46-3, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf
+TO-46-3 Thorlabs
+0
+3
+3
+Package_TO_SOT_THT
+TO-46-3_Pin2Center_Window
+TO-46-3, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf
+TO-46-3 Thorlabs
+0
+3
+3
+Package_TO_SOT_THT
+TO-46-3_Window
+TO-46-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-46-4
+TO-46-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-46-4_Window
+TO-46-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-46-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-52-2
+TO-52-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-52-2
+0
+2
+2
+Package_TO_SOT_THT
+TO-52-2_Window
+TO-52-2, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-52-2 Window
+0
+2
+2
+Package_TO_SOT_THT
+TO-52-3
+TO-52-3, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-52-3
+0
+3
+3
+Package_TO_SOT_THT
+TO-52-3_Window
+TO-52-3, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-52-3 Window
+0
+3
+3
+Package_TO_SOT_THT
+TO-72-4
+TO-72-4, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-72-4
+0
+4
+4
+Package_TO_SOT_THT
+TO-72-4_Window
+TO-72-4, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-72-4 Window
+0
+4
+4
+Package_TO_SOT_THT
+TO-75-6
+TO-75-6, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-75-6
+0
+6
+6
+Package_TO_SOT_THT
+TO-75-6_Window
+TO-75-6, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-75-6 Window
+0
+6
+6
+Package_TO_SOT_THT
+TO-78-6
+TO-78-6, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-6
+0
+6
+6
+Package_TO_SOT_THT
+TO-78-6_Window
+TO-78-6, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-6 Window
+0
+6
+6
+Package_TO_SOT_THT
+TO-78-8
+TO-78-8, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-8
+0
+8
+8
+Package_TO_SOT_THT
+TO-78-8_Window
+TO-78-8, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-8 Window
+0
+8
+8
+Package_TO_SOT_THT
+TO-78-10
+TO-78-10, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-10
+0
+10
+10
+Package_TO_SOT_THT
+TO-78-10_Window
+TO-78-10, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-78-10 Window
+0
+10
+10
+Package_TO_SOT_THT
+TO-92
+TO-92 leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92-2
+TO-92 2-pin leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 diode SOD70
+0
+2
+2
+Package_TO_SOT_THT
+TO-92-2_Horizontal1
+2-pin TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 temperature sensor diode
+0
+2
+2
+Package_TO_SOT_THT
+TO-92-2_Horizontal2
+2-pin TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 temperature sensor diode
+0
+2
+2
+Package_TO_SOT_THT
+TO-92-2_W4.0mm_Horizontal_FlatSideDown
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+2
+2
+Package_TO_SOT_THT
+TO-92-2_W4.0mm_Horizontal_FlatSideUp
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+2
+2
+Package_TO_SOT_THT
+TO-92-2_Wide
+TO-92 2-pin leads in-line, wide, drill 0.75mm
+to-92 sc-43 sc-43a sot54 PA33 diode SOD70
+0
+2
+2
+Package_TO_SOT_THT
+TO-92Flat
+TO-92Flat package, often used for hall sensors, drill 0.75mm (see e.g. http://www.ti.com/lit/ds/symlink/drv5023.pdf)
+to-92Flat hall sensor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92L
+TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
+TO-92L Molded Narrow transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92L_HandSolder
+TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92L_Inline
+TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
+TO-92L Inline Wide transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92L_Inline_Wide
+TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
+TO-92L Inline Wide transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92L_Wide
+TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
+TO-92L Molded Wide transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92Mini-2
+TO-92Mini package, drill 0.6mm (https://media.digikey.com/pdf/Data%20Sheets/Infineon%20PDFs/KT,KTY.pdf)
+to-92Mini transistor 
+0
+2
+2
+Package_TO_SOT_THT
+TO-92S
+TO-92S package, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf, https://www.mouser.com/datasheet/2/196/Infineon_TLV4961_1TAB_DataSheet_v01_20_EN-3363873.pdf#page=16, hole and pad size from TI land pattern in https://www.ti.com/lit/ds/symlink/lmt85.pdf#page=22)
+transistor TO-92S-Type-B Allegro-3-pin-SIP LPG0003A
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_HandSolder
+TO-92 leads molded, narrow, drill 0.75mm, handsoldering variant with enlarged pads (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Horizontal1
+TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Horizontal2
+TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline
+TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline_Horizontal1
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline_Horizontal2
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline_W4.0mm_Horizontal_FlatSideDown
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline_W4.0mm_Horizontal_FlatSideUp
+TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Inline_Wide
+TO-92 leads in-line, wide, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_W4.0mm_StaggerEven_Horizontal_FlatSideDown
+TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_W4.0mm_StaggerEven_Horizontal_FlatSideUp
+TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-92_Wide
+TO-92 leads molded, wide, drill 0.75mm (see NXP sot054_po.pdf)
+to-92 sc-43 sc-43a sot54 PA33 transistor
+0
+3
+3
+Package_TO_SOT_THT
+TO-99-6
+TO-99-6, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-99-6
+0
+6
+6
+Package_TO_SOT_THT
+TO-99-6_Window
+TO-99-6, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-99-6 Window
+0
+6
+6
+Package_TO_SOT_THT
+TO-99-8
+TO-99-8, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-99-8
+0
+8
+8
+Package_TO_SOT_THT
+TO-99-8_Window
+TO-99-8, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-99-8 Window
+0
+8
+8
+Package_TO_SOT_THT
+TO-100-10
+TO-100-10, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-100-10
+0
+10
+10
+Package_TO_SOT_THT
+TO-100-10_Window
+TO-100-10, Window, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-100-10 Window
+0
+10
+10
+Package_TO_SOT_THT
+TO-126-2_Horizontal_TabDown
+TO-126-2, Horizontal, RM 5.08mm, see https://www.caddock.com/online_catalog/mrktg_lit/MP9000_Series.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-126-2_Horizontal_TabUp
+TO-126-2, Horizontal, RM 5.08mm, see https://www.caddock.com/online_catalog/mrktg_lit/MP9000_Series.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-126-2_Vertical
+TO-126-2, Vertical, RM 5.08mm, see https://www.caddock.com/online_catalog/mrktg_lit/MP9000_Series.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-2 Vertical RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-126-3_Horizontal_TabDown
+TO-126-3, Horizontal, RM 2.28mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-3 Horizontal RM 2.28mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-126-3_Horizontal_TabUp
+TO-126-3, Horizontal, RM 2.28mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-3 Horizontal RM 2.28mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-126-3_Vertical
+TO-126-3, Vertical, RM 2.28mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-126-3 Vertical RM 2.28mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-218-2_Horizontal_TabDown
+TO-218-2, Horizontal, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-2 Horizontal RM 10.95mm SOT-93
+0
+2
+2
+Package_TO_SOT_THT
+TO-218-2_Horizontal_TabUp
+TO-218-2, Horizontal, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-2 Horizontal RM 10.95mm SOT-93
+0
+2
+2
+Package_TO_SOT_THT
+TO-218-2_Vertical
+TO-218-2, Vertical, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-2 Vertical RM 10.95mm SOT-93
+0
+2
+2
+Package_TO_SOT_THT
+TO-218-3_Horizontal_TabDown
+TO-218-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-3 Horizontal RM 5.475mm SOT-93
+0
+3
+3
+Package_TO_SOT_THT
+TO-218-3_Horizontal_TabUp
+TO-218-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-3 Horizontal RM 5.475mm SOT-93
+0
+3
+3
+Package_TO_SOT_THT
+TO-218-3_Vertical
+TO-218-3, Vertical, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-218-3 Vertical RM 5.475mm SOT-93
+0
+3
+3
+Package_TO_SOT_THT
+TO-220-2_Horizontal_TabDown
+TO-220-2, Horizontal, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220-2_Horizontal_TabUp
+TO-220-2, Horizontal, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220-2_Vertical
+TO-220-2, Vertical, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-2 Vertical RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220-3_Horizontal_TabDown
+TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-3 Horizontal RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220-3_Horizontal_TabUp
+TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-3 Horizontal RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220-3_Vertical
+TO-220-3, Vertical, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-3 Vertical RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220-4_Horizontal_TabDown
+TO-220-4, Horizontal, RM 2.54mm, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_Horizontal_TabUp
+TO-220-4, Horizontal, RM 2.54mm, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_P5.08x3.7mm_StaggerEven_Lead3.8mm_Vertical
+TO-220-4, Vertical, RM 2.54mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Vertical RM 2.54mm staggered type-2
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_P5.08x3.7mm_StaggerOdd_Lead3.8mm_Vertical
+TO-220-4, Vertical, RM 2.54mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Vertical RM 2.54mm staggered type-1
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_P5.08x3.8mm_StaggerEven_Lead5.85mm_TabDown
+TO-220-4, Horizontal, RM 2.54mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Horizontal RM 2.54mm staggered type-2
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_P5.08x3.8mm_StaggerOdd_Lead5.85mm_TabDown
+TO-220-4, Horizontal, RM 2.54mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Horizontal RM 2.54mm staggered type-1
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-4_Vertical
+TO-220-4, Vertical, RM 2.54mm, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-4 Vertical RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220-5_Horizontal_TabDown
+TO-220-5, Horizontal, RM 1.7mm, Pentawatt, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Horizontal RM 1.7mm Pentawatt
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_Horizontal_TabUp
+TO-220-5, Horizontal, RM 1.7mm, Pentawatt, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Horizontal RM 1.7mm Pentawatt
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_P3.4x3.7mm_StaggerEven_Lead3.8mm_Vertical
+TO-220-5, Vertical, RM 1.7mm, Pentawatt, staggered type-2, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Vertical RM 1.7mm Pentawatt staggered type-2
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical
+TO-220-5, Vertical, RM 1.7mm, Pentawatt, staggered type-1, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Vertical RM 1.7mm Pentawatt staggered type-1
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_P3.4x3.8mm_StaggerEven_Lead7.13mm_TabDown
+TO-220-5, Horizontal, RM 1.7mm, Pentawatt, staggered type-2, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Horizontal RM 1.7mm Pentawatt staggered type-2
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_P3.4x3.8mm_StaggerOdd_Lead7.13mm_TabDown
+TO-220-5, Horizontal, RM 1.7mm, Pentawatt, staggered type-1, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Horizontal RM 1.7mm Pentawatt staggered type-1
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-5_Vertical
+TO-220-5, Vertical, RM 1.7mm, Pentawatt, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-5 Vertical RM 1.7mm Pentawatt
+0
+5
+5
+Package_TO_SOT_THT
+TO-220-7_P2.54x3.7mm_StaggerEven_Lead3.8mm_Vertical
+TO-220-7, Vertical, RM 1.27mm, staggered type-2
+TO-220-7 Vertical RM 1.27mm staggered type-2
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-7_P2.54x3.7mm_StaggerOdd_Lead3.8mm_Vertical
+TO-220-7, Vertical, RM 1.27mm, staggered type-1
+TO-220-7 Vertical RM 1.27mm staggered type-1
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-7_P2.54x3.8mm_StaggerEven_Lead5.85mm_TabDown
+TO-220-7, Horizontal, RM 1.27mm, staggered type-2
+TO-220-7 Horizontal RM 1.27mm staggered type-2
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-7_P2.54x3.8mm_StaggerOdd_Lead5.85mm_TabDown
+TO-220-7, Horizontal, RM 1.27mm, staggered type-1
+TO-220-7 Horizontal RM 1.27mm staggered type-1
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-7_P2.54x5.1mm_StaggerOdd_Lead8.025mm_TabDown
+TO-220-7, Horizontal, RM 1.27mm, Heptawatt-H, staggered type-1, see https://www.mouser.com/datasheet/2/389/cd00000076-1795191.pdf#page=14, https://www.jedec.org/system/files/docs/TO-220L-01.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-7 Horizontal RM 1.27mm Heptawatt-H staggered type-1
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-7_P2.54x5.08mm_StaggerOdd_Lead3.08mm_Vertical
+TO-220-7, Vertical, RM 1.27mm, Heptawatt-V, NDZ0007B, staggered type-1, see https://www.mouser.com/datasheet/2/389/cd00000076-1795191.pdf#page=14, https://www.jedec.org/system/files/docs/TO-220L-01.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-7 Vertical RM 1.27mm Heptawatt-V NDZ0007B staggered type-1
+0
+7
+7
+Package_TO_SOT_THT
+TO-220-8_Vertical
+TO-220-8 (Multiwatt8), Vertical, 2.54mm Pitch (http://www.st.com/resource/en/datasheet/tda7264.pdf)
+TO-220-9 Vertical 2.54mm Pitch Multiwatt-8
+0
+8
+8
+Package_TO_SOT_THT
+TO-220-9_P1.94x3.7mm_StaggerEven_Lead3.8mm_Vertical
+TO-220-9, Vertical, RM 0.97mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-9 Vertical RM 0.97mm staggered type-2
+0
+9
+9
+Package_TO_SOT_THT
+TO-220-9_P1.94x3.7mm_StaggerOdd_Lead3.8mm_Vertical
+TO-220-9, Vertical, RM 0.97mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-9 Vertical RM 0.97mm staggered type-1
+0
+9
+9
+Package_TO_SOT_THT
+TO-220-9_P1.94x3.8mm_StaggerEven_Lead5.85mm_TabDown
+TO-220-9, Horizontal, RM 0.97mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-9 Horizontal RM 0.97mm staggered type-2
+0
+9
+9
+Package_TO_SOT_THT
+TO-220-9_P1.94x3.8mm_StaggerOdd_Lead5.85mm_TabDown
+TO-220-9, Horizontal, RM 0.97mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-9 Horizontal RM 0.97mm staggered type-1
+0
+9
+9
+Package_TO_SOT_THT
+TO-220-11_P3.4x2.54mm_StaggerEven_Lead5.84mm_TabDown
+TO-220-11, Horizontal, RM 1.7mm, Multiwatt-11, staggered type-2, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-11 Horizontal RM 1.7mm Multiwatt-11 staggered type-2
+0
+11
+11
+Package_TO_SOT_THT
+TO-220-11_P3.4x2.54mm_StaggerOdd_Lead5.84mm_TabDown
+TO-220-11, Horizontal, RM 1.7mm, Multiwatt-11, staggered type-1, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-11 Horizontal RM 1.7mm Multiwatt-11 staggered type-1
+0
+11
+11
+Package_TO_SOT_THT
+TO-220-11_P3.4x5.08mm_StaggerEven_Lead4.58mm_Vertical
+TO-220-11, Vertical, RM 1.7mm, Multiwatt-11, staggered type-2, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-11 Vertical RM 1.7mm Multiwatt-11 staggered type-2
+0
+11
+11
+Package_TO_SOT_THT
+TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.58mm_Vertical
+TO-220-11, Vertical, RM 1.7mm, Multiwatt-11, staggered type-1, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-11 Vertical RM 1.7mm Multiwatt-11 staggered type-1
+0
+11
+11
+Package_TO_SOT_THT
+TO-220-11_P3.4x5.08mm_StaggerOdd_Lead8.45mm_TabDown
+TO-220-11, Horizontal, RM 1.7mm, Multiwatt11, staggered type-1, see http://www.ti.com/lit/ds/symlink/lmd18200.pdf
+TO-220-11 Horizontal RM 1.7mm staggered type-1 Multiwatt-11
+0
+11
+11
+Package_TO_SOT_THT
+TO-220-15_P2.54x2.54mm_StaggerEven_Lead5.84mm_TabDown
+TO-220-15, Horizontal, RM 1.27mm, Multiwatt-15, staggered type-2, see http://www.st.com/resource/en/datasheet/l298.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-15 Horizontal RM 1.27mm Multiwatt-15 staggered type-2
+0
+15
+15
+Package_TO_SOT_THT
+TO-220-15_P2.54x2.54mm_StaggerOdd_Lead5.84mm_TabDown
+TO-220-15, Horizontal, RM 1.27mm, Multiwatt-15, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-15 Horizontal RM 1.27mm Multiwatt-15 staggered type-1
+0
+15
+15
+Package_TO_SOT_THT
+TO-220-15_P2.54x5.08mm_StaggerEven_Lead4.58mm_Vertical
+TO-220-15, Vertical, RM 1.27mm, Multiwatt-15, staggered type-2, see http://www.st.com/resource/en/datasheet/l298.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-15 Vertical RM 1.27mm Multiwatt-15 staggered type-2
+0
+15
+15
+Package_TO_SOT_THT
+TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical
+TO-220-15, Vertical, RM 1.27mm, Multiwatt-15, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220-15 Vertical RM 1.27mm Multiwatt-15 staggered type-1
+0
+15
+15
+Package_TO_SOT_THT
+TO-220F-2_Horizontal_TabDown
+TO-220F-2, Horizontal, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220F-2_Horizontal_TabUp
+TO-220F-2, Horizontal, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-2 Horizontal RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220F-2_Vertical
+TO-220F-2, Vertical, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-2 Vertical RM 5.08mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-220F-3_Horizontal_TabDown
+TO-220F-3, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-3 Horizontal RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220F-3_Horizontal_TabUp
+TO-220F-3, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-3 Horizontal RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220F-3_Vertical
+TO-220F-3, Vertical, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-3 Vertical RM 2.54mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-220F-4_Horizontal_TabDown
+TO-220F-4, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_Horizontal_TabUp
+TO-220F-4, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_P5.08x2.05mm_StaggerEven_Lead1.85mm_Vertical
+TO-220F-4, Vertical, RM 2.54mm, staggered type-2, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Vertical RM 2.54mm staggered type-2
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_P5.08x2.05mm_StaggerOdd_Lead1.85mm_Vertical
+TO-220F-4, Vertical, RM 2.54mm, staggered type-1, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Vertical RM 2.54mm staggered type-1
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_P5.08x3.7mm_StaggerEven_Lead3.5mm_Vertical
+TO-220F-4, Vertical, RM 2.54mm, staggered type-2, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Vertical RM 2.54mm staggered type-2
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_P5.08x3.7mm_StaggerOdd_Lead3.5mm_Vertical
+TO-220F-4, Vertical, RM 2.54mm, staggered type-1, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Vertical RM 2.54mm staggered type-1
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-4_Vertical
+TO-220F-4, Vertical, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-4 Vertical RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-220F-5_Horizontal_TabDown
+TO-220F-5, Horizontal, RM 1.7mm, PentawattF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Horizontal RM 1.7mm PentawattF
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_Horizontal_TabUp
+TO-220F-5, Horizontal, RM 1.7mm, PentawattF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Horizontal RM 1.7mm PentawattF
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_P3.4x2.06mm_StaggerEven_Lead1.86mm_Vertical
+TO-220F-5, Vertical, RM 1.7mm, PentawattF, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Vertical RM 1.7mm PentawattF staggered type-2
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_P3.4x2.06mm_StaggerOdd_Lead1.86mm_Vertical
+TO-220F-5, Vertical, RM 1.7mm, PentawattF, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Vertical RM 1.7mm PentawattF staggered type-1
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_P3.4x3.7mm_StaggerEven_Lead3.5mm_Vertical
+TO-220F-5, Vertical, RM 1.7mm, PentawattF, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Vertical RM 1.7mm PentawattF staggered type-2
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_P3.4x3.7mm_StaggerOdd_Lead3.5mm_Vertical
+TO-220F-5, Vertical, RM 1.7mm, PentawattF, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Vertical RM 1.7mm PentawattF staggered type-1
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-5_Vertical
+TO-220F-5, Vertical, RM 1.7mm, PentawattF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-5 Vertical RM 1.7mm PentawattF
+0
+5
+5
+Package_TO_SOT_THT
+TO-220F-7_P2.54x3.7mm_StaggerEven_Lead3.5mm_Vertical
+TO-220F-7, Vertical, RM 1.27mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-7 Vertical RM 1.27mm staggered type-2
+0
+7
+7
+Package_TO_SOT_THT
+TO-220F-7_P2.54x3.7mm_StaggerOdd_Lead3.5mm_Vertical
+TO-220F-7, Vertical, RM 1.27mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-7 Vertical RM 1.27mm staggered type-1
+0
+7
+7
+Package_TO_SOT_THT
+TO-220F-9_P1.8x3.7mm_StaggerEven_Lead3.5mm_Vertical
+TO-220F-9, Vertical, RM 0.9mm, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-9 Vertical RM 0.9mm staggered type-2
+0
+9
+9
+Package_TO_SOT_THT
+TO-220F-9_P1.8x3.7mm_StaggerOdd_Lead3.5mm_Vertical
+TO-220F-9, Vertical, RM 0.9mm, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-9 Vertical RM 0.9mm staggered type-1
+0
+9
+9
+Package_TO_SOT_THT
+TO-220F-11_P3.4x5.08mm_StaggerEven_Lead5.08mm_Vertical
+TO-220F-11, Vertical, RM 1.7mm, MultiwattF-11, staggered type-2, see http://www.ti.com/lit/ds/symlink/lm3886.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-11 Vertical RM 1.7mm MultiwattF-11 staggered type-2
+0
+11
+11
+Package_TO_SOT_THT
+TO-220F-11_P3.4x5.08mm_StaggerOdd_Lead5.08mm_Vertical
+TO-220F-11, Vertical, RM 1.7mm, MultiwattF-11, staggered type-1, see http://www.ti.com/lit/ds/symlink/lm3886.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-11 Vertical RM 1.7mm MultiwattF-11 staggered type-1
+0
+11
+11
+Package_TO_SOT_THT
+TO-220F-15_P2.54x5.08mm_StaggerEven_Lead5.08mm_Vertical
+TO-220F-15, Vertical, RM 1.27mm, MultiwattF-15, staggered type-2, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-15 Vertical RM 1.27mm MultiwattF-15 staggered type-2
+0
+15
+15
+Package_TO_SOT_THT
+TO-220F-15_P2.54x5.08mm_StaggerOdd_Lead5.08mm_Vertical
+TO-220F-15, Vertical, RM 1.27mm, MultiwattF-15, staggered type-1, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-220F-15 Vertical RM 1.27mm MultiwattF-15 staggered type-1
+0
+15
+15
+Package_TO_SOT_THT
+TO-247-2_Horizontal_TabDown
+TO-247-2, Horizontal, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-2 Horizontal RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-247-2_Horizontal_TabUp
+TO-247-2, Horizontal, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-2 Horizontal RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-247-2_Vertical
+TO-247-2, Vertical, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-2 Vertical RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-247-3_Horizontal_TabDown
+TO-247-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-247-3_Horizontal_TabUp
+TO-247-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-247-3_Vertical
+TO-247-3, Vertical, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-3 Vertical RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-247-4_Horizontal_TabDown
+TO-247-4, Horizontal, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-247-4_Horizontal_TabUp
+TO-247-4, Horizontal, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-4 Horizontal RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-247-4_Vertical
+TO-247-4, Vertical, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-4 Vertical RM 2.54mm
+0
+4
+4
+Package_TO_SOT_THT
+TO-247-5_Horizontal_TabDown
+TO-247-5, Horizontal, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-5 Horizontal RM 2.54mm
+0
+5
+5
+Package_TO_SOT_THT
+TO-247-5_Horizontal_TabUp
+TO-247-5, Horizontal, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-5 Horizontal RM 2.54mm
+0
+5
+5
+Package_TO_SOT_THT
+TO-247-5_Vertical
+TO-247-5, Vertical, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-247-5 Vertical RM 2.54mm
+0
+5
+5
+Package_TO_SOT_THT
+TO-251-2-1EP_Horizontal_TabDown
+TO-251-2, Horizontal, RM 4.58mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-251-2 Horizontal RM 4.58mm IPAK
+0
+3
+3
+Package_TO_SOT_THT
+TO-251-2_Vertical
+TO-251-2, Vertical, RM 4.58mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-251-2 Vertical RM 4.58mm IPAK
+0
+2
+2
+Package_TO_SOT_THT
+TO-251-3-1EP_Horizontal_TabDown
+TO-251-3, Horizontal, RM 2.29mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-251-3 Horizontal RM 2.29mm IPAK
+0
+4
+4
+Package_TO_SOT_THT
+TO-251-3_Vertical
+TO-251-3, Vertical, RM 2.29mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-251-3 Vertical RM 2.29mm IPAK
+0
+3
+3
+Package_TO_SOT_THT
+TO-262-3-1EP_Horizontal_TabDown
+TO-262-3, Horizontal, RM 2.54mm, IIPAK, I2PAK, see http://www.onsemi.com/pub/Collateral/EN8586-D.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-262-3 Horizontal RM 2.54mm IIPAK I2PAK
+0
+4
+4
+Package_TO_SOT_THT
+TO-262-3_Vertical
+TO-262-3, Vertical, RM 2.54mm, IIPAK, I2PAK, see http://www.onsemi.com/pub/Collateral/EN8586-D.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-262-3 Vertical RM 2.54mm IIPAK I2PAK
+0
+3
+3
+Package_TO_SOT_THT
+TO-262-5-1EP_Horizontal_TabDown
+TO-262-5, Horizontal, RM 1.7mm, IIPAK, I2PAK, see http://pdf.datasheetcatalog.com/datasheet/irf/iris4011.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-262-5 Horizontal RM 1.7mm IIPAK I2PAK
+0
+6
+6
+Package_TO_SOT_THT
+TO-262-5_Vertical
+TO-262-5, Vertical, RM 1.7mm, IIPAK, I2PAK, see http://pdf.datasheetcatalog.com/datasheet/irf/iris4011.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-262-5 Vertical RM 1.7mm IIPAK I2PAK
+0
+5
+5
+Package_TO_SOT_THT
+TO-264-2_Horizontal_TabDown
+TO-264-2, Horizontal, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-2 Horizontal RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-264-2_Horizontal_TabUp
+TO-264-2, Horizontal, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-2 Horizontal RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-264-2_Vertical
+TO-264-2, Vertical, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-2 Vertical RM 10.9mm
+0
+2
+2
+Package_TO_SOT_THT
+TO-264-3_Horizontal_TabDown
+TO-264-3, Horizontal, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-264-3_Horizontal_TabUp
+TO-264-3, Horizontal, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-3 Horizontal RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-264-3_Vertical
+TO-264-3, Vertical, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-3 Vertical RM 5.45mm
+0
+3
+3
+Package_TO_SOT_THT
+TO-264-5_Horizontal_TabDown
+TO-264-5, Horizontal, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-5 Horizontal RM 3.81mm
+0
+5
+5
+Package_TO_SOT_THT
+TO-264-5_Horizontal_TabUp
+TO-264-5, Horizontal, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-5 Horizontal RM 3.81mm
+0
+5
+5
+Package_TO_SOT_THT
+TO-264-5_Vertical
+TO-264-5, Vertical, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF, generated with kicad-footprint-generator TO_SOT_THT_generate.py
+TO-264-5 Vertical RM 3.81mm
+0
+5
+5
+Potentiometer_SMD
+Potentiometer_ACP_CA6-VSMD_Vertical
+Potentiometer, vertical, ACP CA6-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf
+Potentiometer vertical ACP CA6-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_ACP_CA6-VSMD_Vertical_Hole
+Potentiometer, vertical, shaft hole, ACP CA6-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf
+Potentiometer vertical hole ACP CA6-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_ACP_CA9-VSMD_Vertical
+Potentiometer, vertical, ACP CA9-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer vertical ACP CA9-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_ACP_CA9-VSMD_Vertical_Hole
+Potentiometer, vertical, shaft hole, ACP CA9-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer vertical hole ACP CA9-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_ACP_CA14-VSMD_Vertical
+Potentiometer, vertical, ACP CA14-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer vertical ACP CA14-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_ACP_CA14-VSMD_Vertical_Hole
+Potentiometer, vertical, shaft hole, ACP CA14-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer vertical hole ACP CA14-VSMD
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3214G_Horizontal
+Potentiometer, horizontal, Bourns 3214G, https://www.bourns.com/docs/Product-Datasheets/3214.pdf
+Potentiometer horizontal Bourns 3214G
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3214J_Horizontal
+Potentiometer, horizontal, Bourns 3214J, https://www.bourns.com/docs/Product-Datasheets/3214.pdf
+Potentiometer horizontal Bourns 3214J
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3214W_Vertical
+Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf
+Potentiometer vertical Bourns 3214W
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3214X_Vertical
+Potentiometer, vertical, Bourns 3214X, https://www.bourns.com/docs/Product-Datasheets/3214.pdf
+Potentiometer vertical Bourns 3214X
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3224G_Horizontal
+Potentiometer, horizontal, Bourns 3224G, https://www.bourns.com/docs/Product-Datasheets/3224.pdf
+Potentiometer horizontal Bourns 3224G
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3224J_Horizontal
+Potentiometer, horizontal, Bourns 3224J, https://www.bourns.com/docs/Product-Datasheets/3224.pdf
+Potentiometer horizontal Bourns 3224J
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3224W_Vertical
+Potentiometer, vertical, Bourns 3224W, https://www.bourns.com/docs/Product-Datasheets/3224.pdf
+Potentiometer vertical Bourns 3224W
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3224X_Vertical
+Potentiometer, vertical, Bourns 3224X, https://www.bourns.com/docs/Product-Datasheets/3224.pdf
+Potentiometer vertical Bourns 3224X
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3269P_Horizontal
+Potentiometer, horizontal, Bourns 3269P, https://www.bourns.com/docs/Product-Datasheets/3269.pdf
+Potentiometer horizontal Bourns 3269P
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3269W_Vertical
+Potentiometer, vertical, Bourns 3269W, https://www.bourns.com/docs/Product-Datasheets/3269.pdf
+Potentiometer vertical Bourns 3269W
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3269X_Horizontal
+Potentiometer, horizontal, Bourns 3269X, https://www.bourns.com/docs/Product-Datasheets/3269.pdf
+Potentiometer horizontal Bourns 3269X
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3314G_Vertical
+Potentiometer, vertical, Bourns 3314G, http://www.bourns.com/docs/Product-Datasheets/3314.pdf
+Potentiometer vertical Bourns 3314G
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3314J_Vertical
+Potentiometer, vertical, Bourns 3314J, http://www.bourns.com/docs/Product-Datasheets/3314.pdf
+Potentiometer vertical Bourns 3314J
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3314R-1_Vertical_Hole
+Potentiometer, vertical, shaft hole, Bourns 3314R-1, http://www.bourns.com/docs/Product-Datasheets/3314.pdf
+Potentiometer vertical hole Bourns 3314R-1
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3314R-GM5_Vertical_Hole
+Potentiometer, vertical, shaft hole, extended leadframe, Bourns 3314R-GM5, http://www.bourns.com/docs/Product-Datasheets/3314.pdf
+Potentiometer vertical hole extended leadframe Bourns 3314R-GM5
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_3314S_Horizontal
+Potentiometer, horizontal, Bourns 3314S, http://www.bourns.com/docs/Product-Datasheets/3314.pdf
+Potentiometer horizontal Bourns 3314S
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Bourns_PRS11S_Vertical
+Potentiometer, vertical, Bourns PRS11S, http://www.bourns.com/docs/Product-Datasheets/PRS11S.pdf
+Potentiometer vertical Bourns PRS11S
+0
+5
+5
+Potentiometer_SMD
+Potentiometer_Bourns_TC33X_Vertical
+Potentiometer, Bourns, TC33X, Vertical, https://www.bourns.com/pdfs/TC33.pdf
+Potentiometer Bourns TC33X Vertical
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Vishay_TS53YJ_Vertical
+Potentiometer, vertical, Vishay TS53YJ, https://www.vishay.com/docs/51008/ts53.pdf
+Potentiometer vertical Vishay TS53YJ
+0
+3
+3
+Potentiometer_SMD
+Potentiometer_Vishay_TS53YL_Vertical
+Potentiometer, vertical, Vishay TS53YL, https://www.vishay.com/docs/51008/ts53.pdf
+Potentiometer vertical Vishay TS53YL
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA6-H2,5_Horizontal
+Potentiometer, horizontal, ACP CA6-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf
+Potentiometer horizontal ACP CA6-H2,5
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA9-H2,5_Horizontal
+Potentiometer, horizontal, ACP CA9-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer horizontal ACP CA9-H2,5
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA9-H3,8_Horizontal
+Potentiometer, horizontal, ACP CA9-H3,8, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer horizontal ACP CA9-H3,8
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA9-H5_Horizontal
+Potentiometer, horizontal, ACP CA9-H5, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer horizontal ACP CA9-H5
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA9-V10_Vertical
+Potentiometer, vertical, ACP CA9-V10, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer vertical ACP CA9-V10
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA9-V10_Vertical_Hole
+Potentiometer, vertical, shaft hole, ACP CA9-V10, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf
+Potentiometer vertical hole ACP CA9-V10
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA14-H2,5_Horizontal
+Potentiometer, horizontal, ACP CA14-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer horizontal ACP CA14-H2,5
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA14-H4_Horizontal
+Potentiometer, horizontal, ACP CA14-H4, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer horizontal ACP CA14-H4
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA14-H5_Horizontal
+Potentiometer, horizontal, ACP CA14-H5, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer horizontal ACP CA14-H5
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA14V-15_Vertical
+Potentiometer, vertical, ACP CA14V-15, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer vertical ACP CA14V-15
+0
+3
+3
+Potentiometer_THT
+Potentiometer_ACP_CA14V-15_Vertical_Hole
+Potentiometer, vertical, shaft hole, ACP CA14V-15, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf
+Potentiometer vertical hole ACP CA14V-15
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Alpha_RD901F-40-00D_Single_Vertical
+Potentiometer, vertical, 9mm, single, http://www.taiwanalpha.com.tw/downloads?target=products&id=113
+potentiometer vertical 9mm single
+0
+5
+3
+Potentiometer_THT
+Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles
+Potentiometer, vertical, 9mm, single, http://www.taiwanalpha.com.tw/downloads?target=products&id=113
+potentiometer vertical 9mm single
+0
+5
+3
+Potentiometer_THT
+Potentiometer_Alpha_RD902F-40-00D_Dual_Vertical
+Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113
+potentiometer vertical 9mm dual
+0
+8
+6
+Potentiometer_THT
+Potentiometer_Alpha_RD902F-40-00D_Dual_Vertical_CircularHoles
+Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113
+potentiometer vertical 9mm dual
+0
+8
+6
+Potentiometer_THT
+Potentiometer_Alps_RK09K_Single_Horizontal
+111009J 1110AK4 11100DN 1110AAR 1110077 1110A0J 110AMJ 1110B26 D1110C1A Potentiometer, horizontal, Alps RK09K Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09k/rk09k.pdf
+Potentiometer horizontal Alps RK09K Single Snapin
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Alps_RK09K_Single_Vertical
+113004U 1130A6S 11300DR 1130A8G 1130081 1130A5R 1130AP5 1130AST  D1130C3W D1130C1B D1130C3C D1130C2P Potentiometer, vertical, Alps RK09K Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09k/rk09k.pdf
+Potentiometer vertical Alps RK09K RK09D Single Snapin
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Alps_RK09L_Double_Horizontal
+122002H 122002L 12B0A4S 12B0A1V Potentiometer, horizontal, Alps RK09L Double, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf
+Potentiometer horizontal Alps RK09L Double
+0
+8
+7
+Potentiometer_THT
+Potentiometer_Alps_RK09L_Double_Vertical
+1240015 1240019 12D0A1W 12D0A1T Potentiometer, vertical, Alps RK09L Double, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf
+Potentiometer vertical Alps RK09L Double
+0
+8
+7
+Potentiometer_THT
+Potentiometer_Alps_RK09L_Single_Horizontal
+1120A5F 1120036 1120A0Z 112003S Potentiometer, horizontal, Alps RK09L Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf
+Potentiometer horizontal Alps RK09L Single
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Alps_RK09L_Single_Vertical
+ 1140A5L 114001E 1140A2U 114001T Potentiometer, vertical, Alps RK09L Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf
+Potentiometer vertical Alps RK09L Single
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Alps_RK09Y11_Single_Horizontal
+Potentiometer, horizontal, Long Life, Alps RK09Y11 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09y11/rk09y11.pdf
+Potentiometer horizontal Alps RK09Y11 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Alps_RK097_Dual_Horizontal
+1210, Dual Pot, Horizontal, Alps RK097 Dual,  https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf
+Potentiometer horizontal Alps RK097 Dual
+0
+6
+6
+Potentiometer_THT
+Potentiometer_Alps_RK097_Dual_Horizontal_Switch
+1221-5R1211, Dual Pot, Horizontal, Switch, Alps RK097 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf
+Potentiometer horizontal Alps RK097 Dual Switch
+0
+8
+8
+Potentiometer_THT
+Potentiometer_Alps_RK097_Single_Horizontal
+1110, Single Pot, Horizontal, Alps RK097 Single,  https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf
+Potentiometer horizontal Alps RK097 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Alps_RK097_Single_Horizontal_Switch
+1111-5R1211, Single Pot, Horizontal, Switch, Alps RK097 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf
+Potentiometer horizontal Alps RK097 Single Switch
+0
+5
+5
+Potentiometer_THT
+Potentiometer_Alps_RK163_Dual_Horizontal
+12101A2 1210AX9 12A0B85 12A0BKR  Potentiometer, horizontal, Alps RK163 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk16/rk16.pdf
+Potentiometer horizontal Alps RK163 Dual
+0
+6
+6
+Potentiometer_THT
+Potentiometer_Alps_RK163_Single_Horizontal
+1110U1Q 1110TNP 1110U2A 1110U0Q Potentiometer, horizontal, Alps RK163 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk16/rk16.pdf
+Potentiometer horizontal Alps RK163 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_20P_Horizontal
+Potentiometer, horizontal, Bourns 20P, https://www.mouser.at/datasheet/2/54/20-1159178.pdf
+Potentiometer horizontal Bourns 20P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3005_Horizontal
+Potentiometer, horizontal, Bourns 3005, http://www.bourns.com/docs/Product-Datasheets/3005.pdf
+Potentiometer horizontal Bourns 3005
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3006P_Horizontal
+Potentiometer, horizontal, Bourns 3006P, https://www.bourns.com/docs/Product-Datasheets/3006.pdf
+Potentiometer horizontal Bourns 3006P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3006W_Horizontal
+Potentiometer, horizontal, Bourns 3006W, https://www.bourns.com/docs/Product-Datasheets/3006.pdf
+Potentiometer horizontal Bourns 3006W
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3006Y_Horizontal
+Potentiometer, horizontal, Bourns 3006Y, https://www.bourns.com/docs/Product-Datasheets/3006.pdf
+Potentiometer horizontal Bourns 3006Y
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3009P_Horizontal
+Potentiometer, horizontal, Bourns 3009P, http://www.bourns.com/docs/Product-Datasheets/3009.pdf
+Potentiometer horizontal Bourns 3009P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3009Y_Horizontal
+Potentiometer, horizontal, Bourns 3009Y, http://www.bourns.com/docs/Product-Datasheets/3009.pdf
+Potentiometer horizontal Bourns 3009Y
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3266P_Horizontal
+Potentiometer, horizontal, Bourns 3266P, https://www.bourns.com/docs/Product-Datasheets/3266.pdf
+Potentiometer horizontal Bourns 3266P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3266W_Vertical
+Potentiometer, vertical, Bourns 3266W, https://www.bourns.com/docs/Product-Datasheets/3266.pdf
+Potentiometer vertical Bourns 3266W
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3266X_Horizontal
+Potentiometer, horizontal, Bourns 3266X, https://www.bourns.com/docs/Product-Datasheets/3266.pdf
+Potentiometer horizontal Bourns 3266X
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3266Y_Vertical
+Potentiometer, vertical, Bourns 3266Y, https://www.bourns.com/docs/Product-Datasheets/3266.pdf
+Potentiometer vertical Bourns 3266Y
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3266Z_Horizontal
+Potentiometer, horizontal, Bourns 3266Z, https://www.bourns.com/docs/Product-Datasheets/3266.pdf
+Potentiometer horizontal Bourns 3266Z
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3296P_Horizontal
+Potentiometer, horizontal, Bourns 3296P, https://www.bourns.com/pdfs/3296.pdf
+Potentiometer horizontal Bourns 3296P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3296W_Vertical
+Potentiometer, vertical, Bourns 3296W, https://www.bourns.com/pdfs/3296.pdf
+Potentiometer vertical Bourns 3296W
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3296X_Horizontal
+Potentiometer, horizontal, Bourns 3296X, https://www.bourns.com/pdfs/3296.pdf
+Potentiometer horizontal Bourns 3296X
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3296Y_Vertical
+Potentiometer, vertical, Bourns 3296Y, https://www.bourns.com/pdfs/3296.pdf
+Potentiometer vertical Bourns 3296Y
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3296Z_Horizontal
+Potentiometer, horizontal, Bourns 3296Z, https://www.bourns.com/pdfs/3296.pdf
+Potentiometer horizontal Bourns 3296Z
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3299P_Horizontal
+Potentiometer, horizontal, Bourns 3299P, https://www.bourns.com/pdfs/3299.pdf
+Potentiometer horizontal Bourns 3299P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3299W_Vertical
+Potentiometer, vertical, Bourns 3299W, https://www.bourns.com/pdfs/3299.pdf
+Potentiometer vertical Bourns 3299W
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3299X_Horizontal
+Potentiometer, horizontal, Bourns 3299X, https://www.bourns.com/pdfs/3299.pdf
+Potentiometer horizontal Bourns 3299X
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3299Y_Vertical
+Potentiometer, vertical, Bourns 3299Y, https://www.bourns.com/pdfs/3299.pdf
+Potentiometer vertical Bourns 3299Y
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3299Z_Horizontal
+Potentiometer, horizontal, Bourns 3299Z, https://www.bourns.com/pdfs/3299.pdf
+Potentiometer horizontal Bourns 3299Z
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3339H_Vertical
+Potentiometer, vertical, Bourns 3339H, http://www.bourns.com/docs/Product-Datasheets/3339.pdf
+Potentiometer vertical Bourns 3339H
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3339P_Vertical
+Potentiometer, vertical, Bourns 3339P, http://www.bourns.com/docs/Product-Datasheets/3339.pdf
+Potentiometer vertical Bourns 3339P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3339P_Vertical_HandSoldering
+Potentiometer, vertical, Bourns 3339P, hand-soldering, http://www.bourns.com/docs/Product-Datasheets/3339.pdf
+Potentiometer vertical Bourns 3339P hand-soldering
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3339S_Horizontal
+Potentiometer, horizontal, Bourns 3339S, http://www.bourns.com/docs/Product-Datasheets/3339.pdf
+Potentiometer horizontal Bourns 3339S
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3339W_Horizontal
+Potentiometer, horizontal, Bourns 3339W, http://www.bourns.com/docs/Product-Datasheets/3339.pdf
+Potentiometer horizontal Bourns 3339W
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3386C_Horizontal
+Potentiometer, horizontal, Bourns 3386C, https://www.bourns.com/pdfs/3386.pdf
+Potentiometer horizontal Bourns 3386C
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3386F_Vertical
+Potentiometer, vertical, Bourns 3386F, https://www.bourns.com/pdfs/3386.pdf
+Potentiometer vertical Bourns 3386F
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3386P_Vertical
+Potentiometer, vertical, Bourns 3386P, https://www.bourns.com/pdfs/3386.pdf
+Potentiometer vertical Bourns 3386P
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3386W_Horizontal
+Potentiometer, horizontal, Bourns 3386W, 9.53 x 4.83 x 9.53mm, https://www.bourns.com/docs/Product-Datasheets/3386.pdf
+Potentiometer 
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_3386X_Horizontal
+Potentiometer, horizontal, Bourns 3386X, https://www.bourns.com/pdfs/3386.pdf
+Potentiometer horizontal Bourns 3386X
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Bourns_PTA1543_Single_Slide
+Bourns single-gang slide potentiometer, 15.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf
+Bourns single-gang slide potentiometer 15.0mm
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTA2043_Single_Slide
+Bourns single-gang slide potentiometer, 20.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf
+Bourns single-gang slide potentiometer 20.0mm
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTA3043_Single_Slide
+Bourns single-gang slide potentiometer, 30.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf
+Bourns single-gang slide potentiometer 30.0mm
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTA4543_Single_Slide
+Bourns single-gang slide potentiometer, 45.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf
+Bourns single-gang slide potentiometer 45.0mm
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTA6043_Single_Slide
+Bourns single-gang slide potentiometer, 60.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf
+Bourns single-gang slide potentiometer 60.0mm
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTV09A-1_Single_Vertical
+Potentiometer, vertical, Bourns PTV09A-1 Single, http://www.bourns.com/docs/Product-Datasheets/ptv09.pdf
+Potentiometer vertical Bourns PTV09A-1 Single
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTV09A-2_Single_Horizontal
+Potentiometer, horizontal, Bourns PTV09A-2 Single, http://www.bourns.com/docs/Product-Datasheets/ptv09.pdf
+Potentiometer horizontal Bourns PTV09A-2 Single
+0
+5
+4
+Potentiometer_THT
+Potentiometer_Bourns_PTV112-4_Dual_Vertical
+2 Gang dual Through Hole, Snap In potentiometer, https://www.bourns.com/docs/Product-Datasheets/PTVPTT.pdf
+PTV112-4 Dual gang
+0
+8
+7
+Potentiometer_THT
+Potentiometer_Omeg_PC16BU_Horizontal
+Potentiometer, horizontal, Omeg PC16BU, http://www.omeg.co.uk/pc6bubrc.htm
+Potentiometer horizontal Omeg PC16BU
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Omeg_PC16BU_Vertical
+Potentiometer, vertical, Omeg PC16BU, http://www.omeg.co.uk/pc6bubrc.htm
+Potentiometer vertical Omeg PC16BU
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PC-16_Dual_Horizontal
+Potentiometer, horizontal, Piher PC-16 Dual, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf
+Potentiometer horizontal Piher PC-16 Dual
+0
+6
+6
+Potentiometer_THT
+Potentiometer_Piher_PC-16_Single_Horizontal
+Potentiometer, horizontal, Piher PC-16 Single, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf
+Potentiometer horizontal Piher PC-16 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PC-16_Single_Vertical
+Potentiometer, vertical, Piher PC-16 Single, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf
+Potentiometer vertical Piher PC-16 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PC-16_Triple_Horizontal
+Potentiometer, horizontal, Piher PC-16 Triple, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf
+Potentiometer horizontal Piher PC-16 Triple
+0
+9
+9
+Potentiometer_THT
+Potentiometer_Piher_PT-6-H_Horizontal
+Potentiometer, horizontal, Piher PT-6-H, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf
+Potentiometer horizontal Piher PT-6-H
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-6-V_Vertical
+Potentiometer, vertical, Piher PT-6-V, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf
+Potentiometer vertical Piher PT-6-V
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-6-V_Vertical_Hole
+Potentiometer, vertical, shaft hole, Piher PT-6-V, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf
+Potentiometer vertical hole Piher PT-6-V
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-10-H01_Horizontal
+Potentiometer, horizontal, Piher PT-10-H01, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf
+Potentiometer horizontal Piher PT-10-H01
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-10-H05_Horizontal
+Potentiometer, horizontal, Piher PT-10-H05, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf
+Potentiometer horizontal Piher PT-10-H05
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-10-V05_Vertical
+Potentiometer, vertical, Piher PT-10-V05, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf
+Potentiometer vertical Piher PT-10-V05
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-10-V10_Vertical
+Potentiometer, vertical, Piher PT-10-V10, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf
+Potentiometer vertical Piher PT-10-V10
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-10-V10_Vertical_Hole
+Potentiometer, vertical, shaft hole, Piher PT-10-V10, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf
+Potentiometer vertical hole Piher PT-10-V10
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-H01_Horizontal
+Potentiometer, horizontal, Piher PT-15-H01, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer horizontal Piher PT-15-H01
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-H05_Horizontal
+Potentiometer, horizontal, Piher PT-15-H05, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer horizontal Piher PT-15-H05
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-H06_Horizontal
+Potentiometer, horizontal, Piher PT-15-H06, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer horizontal Piher PT-15-H06
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-H25_Horizontal
+Potentiometer, horizontal, Piher PT-15-H25, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer horizontal Piher PT-15-H25
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-V02_Vertical
+Potentiometer, vertical, Piher PT-15-V02, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer vertical Piher PT-15-V02
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-V02_Vertical_Hole
+Potentiometer, vertical, shaft hole, Piher PT-15-V02, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer vertical hole Piher PT-15-V02
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-V15_Vertical
+Potentiometer, vertical, Piher PT-15-V15, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer vertical Piher PT-15-V15
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_PT-15-V15_Vertical_Hole
+Potentiometer, vertical, shaft hole, Piher PT-15-V15, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf
+Potentiometer vertical hole Piher PT-15-V15
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_T-16H_Double_Horizontal
+Potentiometer, horizontal, Piher T-16H Double, http://www.piher-nacesa.com/pdf/22-T16v03.pdf
+Potentiometer horizontal Piher T-16H Double
+0
+6
+6
+Potentiometer_THT
+Potentiometer_Piher_T-16H_Single_Horizontal
+Potentiometer, horizontal, Piher T-16H Single, http://www.piher-nacesa.com/pdf/22-T16v03.pdf
+Potentiometer horizontal Piher T-16H Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Piher_T-16L_Single_Vertical_Hole
+Potentiometer, vertical, shaft hole, Piher T-16L Single, http://www.piher-nacesa.com/pdf/22-T16v03.pdf
+Potentiometer vertical hole Piher T-16L Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Runtron_RM-063_Horizontal
+Potentiometer, horizontal, Trimmer, RM-063 http://www.runtron.com/down/PDF%20Datasheet/Carbon%20Film%20Potentiometer/RM065%20RM063.pdf
+Potentiometer Trimmer RM-063
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Runtron_RM-065_Vertical
+Potentiometer, vertical, Trimmer, RM-065 https://components101.com/sites/default/files/component_datasheet/Preset%20Potentiometer%20%28Trimpot%29.pdf
+Potentiometer Trimmer RM-065
+0
+3
+3
+Potentiometer_THT
+Potentiometer_TT_P0915N
+http://www.ttelectronics.com/sites/default/files/download-files/Datasheet_PanelPot_P09xSeries.pdf
+potentiometer vertical TT P0915N single
+0
+5
+3
+Potentiometer_THT
+Potentiometer_Vishay_43_Horizontal
+Potentiometer, horizontal, Vishay 43, http://www.vishay.com/docs/57026/43.pdf
+Potentiometer horizontal Vishay 43
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_148-149_Dual_Horizontal
+Potentiometer, horizontal, Vishay 148-149 Dual, http://www.vishay.com/docs/57040/148149.pdf
+Potentiometer horizontal Vishay 148-149 Dual
+0
+6
+6
+Potentiometer_THT
+Potentiometer_Vishay_148-149_Single_Horizontal
+Potentiometer, horizontal, Vishay 148-149 Single, http://www.vishay.com/docs/57040/148149.pdf
+Potentiometer horizontal Vishay 148-149 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_148-149_Single_Vertical
+Potentiometer, vertical, Vishay 148-149 Single, http://www.vishay.com/docs/57040/148149.pdf
+Potentiometer vertical Vishay 148-149 Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_148E-149E_Dual_Horizontal
+Potentiometer, horizontal, Vishay 148E-149E Dual, http://www.vishay.com/docs/57040/148149.pdf
+Potentiometer horizontal Vishay 148E-149E Dual
+0
+10
+7
+Potentiometer_THT
+Potentiometer_Vishay_148E-149E_Single_Horizontal
+Potentiometer, horizontal, Vishay 148E-149E Single, http://www.vishay.com/docs/57040/148149.pdf
+Potentiometer horizontal Vishay 148E-149E Single
+0
+7
+4
+Potentiometer_THT
+Potentiometer_Vishay_248BH-249BH_Single_Horizontal
+Potentiometer, horizontal, Vishay 248BH-249BH Single, http://www.vishay.com/docs/57054/248249.pdf
+Potentiometer horizontal Vishay 248BH-249BH Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_248GJ-249GJ_Single_Horizontal
+Potentiometer, horizontal, Vishay 248GJ-249GJ Single, http://www.vishay.com/docs/57054/248249.pdf
+Potentiometer horizontal Vishay 248GJ-249GJ Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_248GJ-249GJ_Single_Vertical
+Potentiometer, vertical, Vishay 248GJ-249GJ Single, http://www.vishay.com/docs/57054/248249.pdf
+Potentiometer vertical Vishay 248GJ-249GJ Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T7-YA_Single_Vertical
+Potentiometer, vertical, Vishay T7-YA Single, http://www.vishay.com/docs/51015/t7.pdf
+Potentiometer vertical Vishay T7-YA Single
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T73XW_Horizontal
+Potentiometer, horizontal, Vishay T73XW, http://www.vishay.com/docs/51016/t73.pdf
+Potentiometer horizontal Vishay T73XW
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T73XX_Horizontal
+Potentiometer, horizontal, Vishay T73XX, http://www.vishay.com/docs/51016/t73.pdf
+Potentiometer horizontal Vishay T73XX
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T73YP_Vertical
+Potentiometer, vertical, Vishay T73YP, http://www.vishay.com/docs/51016/t73.pdf
+Potentiometer vertical Vishay T73YP
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T93XA_Horizontal
+Potentiometer, horizontal, Vishay, https://www.vishay.com/docs/51026/t93.pdf, 3/8" x 3/8" x 3/16" (9.7 x 9.8 x 5mm max.)
+Potentiometer horizontal vishay
+0
+3
+3
+Potentiometer_THT
+Potentiometer_Vishay_T93YA_Vertical
+Potentiometer, vertical, Vishay, https://www.vishay.com/docs/51026/t93.pdf
+Potentiometer vertical vishay
+0
+3
+3
+RF
+Skyworks_SKY13575_639LF
+http://www.skyworksinc.com/uploads/documents/SKY13575_639LF_203270D.pdf
+Skyworks
+0
+19
+15
+RF
+Skyworks_SKY65404-31
+http://www.skyworksinc.com/uploads/documents/SKY65404_31_201512K.pdf
+Skyworks
+0
+7
+7
+RF_Antenna
+AVX_M620720
+868Mhz, 915Mhz ISM antenna, 6 x 2 x 1.08mm, http://datasheets.avx.com/ethertronics/AVX-E_M620720.pdf
+868 915 Mhz ISM antenna
+0
+6
+3
+RF_Antenna
+Abracon_APAES868R8060C16-T
+Abracon RHCP ceramic patch antenna 854-882Mhz, 5dBi
+APAES patch antenna
+0
+1
+1
+RF_Antenna
+Abracon_PRO-OB-440
+Abracon OnBoard SMD antenna 2400-2500Mhz, https://abracon.com/datasheets/PRO-OB-440.pdf
+2400 PRO-OB-440 Antenna
+0
+4
+4
+RF_Antenna
+Abracon_PRO-OB-471
+OnBoard 868/915/868+2400 MHz Antenna, https://abracon.com/datasheets/PRO-OB-471.pdf
+Antenna ProAnt OnBoard 868Mhz 915Mhz 2400Mhz
+0
+6
+6
+RF_Antenna
+Antenova_SR4G013_GPS
+GPS/GLONASS/Galileo/BeiDou antenna, 1559-1609Mhz, SMD, https://www.application-datasheet.com/pdf/antenova/sr4g013.pdf
+antenna GPS Antenova Beltii
+0
+5
+2
+RF_Antenna
+Astrocast_AST50127-00
+L-band patch antenna, https://docs.astrocast.com/dl/0534-DOC-M2M-ASTRO-Patch_Antenna-Datasheet.pdf
+L-band antenna astrocast Patch Antenna
+0
+1
+1
+RF_Antenna
+Coilcraft_MA5532-AE_RFID
+RFID Transponder Coil
+antenna rfid coilcraft
+0
+2
+2
+RF_Antenna
+Johanson_2450AT18x100
+Johanson 2450AT43F0100 SMD antenna 2400-2500Mhz, -0.5dBi, https://www.johansontechnology.com/datasheets/2450AT18A100/2450AT18A100.pdf
+antenna
+0
+2
+2
+RF_Antenna
+Johanson_2450AT43F0100
+Johanson 2450AT43F0100 SMD antenna 2400-2500Mhz, 1dBi, https://www.johansontechnology.com/datasheets/2450AT43F0100/2450AT43F0100.pdf
+antenna
+0
+2
+2
+RF_Antenna
+Molex_47948-0001_2.4Ghz
+SMD antenna 2400-2500Mhz, 3.7dBi, https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/productspecificationpdf/479/47948/PS-47948-001-001.pdf?inline
+rf antenna
+0
+4
+2
+RF_Antenna
+NiceRF_SW868-TH13_868Mhz
+868Mhz copper string antenna, right angle, approx. 15mm coil length, 5.5mm OD, 0.8 wire diameter, https://www.nicerf.com/item/868mhz-spring-antenna-sw868-th13
+antenna rf
+0
+1
+1
+RF_Antenna
+Pulse_W3000
+Pulse Electronics W3000 tri-band antenna for GPS (1.575Ghz), 868Mhz and 2.4Ghz ISM bands, https://productfinder.pulseeng.com/products/datasheets/W3000.pdf
+Antenna GPS 868Mhz ISM 1.575Ghz
+0
+2
+2
+RF_Antenna
+Pulse_W3011
+Pulse RF Antenna, 4mm Clearance
+antenna rf
+0
+3
+2
+RF_Antenna
+Texas_SWRA117D_2.4GHz_Left
+http://www.ti.com/lit/an/swra117d/swra117d.pdf
+PCB antenna
+0
+2
+2
+RF_Antenna
+Texas_SWRA117D_2.4GHz_Right
+http://www.ti.com/lit/an/swra117d/swra117d.pdf
+PCB antenna
+0
+2
+2
+RF_Antenna
+Texas_SWRA416_868MHz_915MHz
+http://www.ti.com/lit/an/swra416/swra416.pdf
+PCB antenna
+0
+20
+1
+RF_Converter
+Anaren_0805_2012Metric-6
+https://cdn.anaren.com/product-documents/Xinger/DirectionalCouplers/DC4759J5020AHF/DC4759J5020AHF_DataSheet(Rev_E).pdf
+coupler rf
+0
+6
+6
+RF_Converter
+Balun_Johanson_1.6x0.8mm
+6-pin 1.6x0.8 mm balun footprint
+Johanson balun filter
+0
+6
+6
+RF_Converter
+Balun_Johanson_0896BM15A0001
+https://www.johansontechnology.com/datasheets/0896BM15A0001/0896BM15A0001.pdf
+balun RF
+0
+6
+6
+RF_Converter
+Balun_Johanson_0900FM15K0039
+Johanson 0900FM15K0039 DFN, 10 Pin (https://www.johansontechnology.com/datasheets/0900FM15K0039/0900FM15K0039.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Johanson DFN NoLead
+0
+10
+10
+RF_Converter
+Balun_Johanson_0900PC15J0013
+Johanson 0900PC15J0013 DFN, 10 Pin (https://www.johansontechnology.com/datasheets/0900PC15J0013/0900PC15J0013.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Johanson DFN NoLead
+0
+10
+10
+RF_Converter
+Balun_Johanson_5400BL15B050E
+https://www.johansontechnology.com/datasheets/5400BL15B050/5400BL15B050.pdf
+balun RF
+0
+6
+6
+RF_Converter
+RF_Attenuator_Susumu_PAT1220
+http://www.susumu-usa.com/pdf/Foot_Print_38.pdf, https://www.susumu.co.jp/common/pdf/n_catalog_partition16_en.pdf
+2mm 1.2mm
+0
+3
+3
+RF_GPS
+Linx_RXM-GPS
+GPS Module, Linx (https://linxtechnologies.com/wp/wp-content/uploads/rxm-gps-rm.pdf)
+gps linx
+0
+22
+22
+RF_GPS
+OriginGPS_ORG1510
+GPS / GNSS Module with integrated antenna, (https://origingps.com/wp-content/uploads/2019/09/HORNET-Modules-Layout-recommendations-and-Integration-Application-Note-Rev-2.0.pdf)
+GPS GNSS OriginGPS Hornet
+0
+23
+11
+RF_GPS
+Quectel_L70-R
+Quectel L70-R, (https://www.quectel.com/product/gps-only-l70-r)
+GPS Quectel L70-R
+0
+18
+18
+RF_GPS
+Quectel_L76
+GPS module, https://www.quectel.com/wp-content/uploads/2021/03/Quectel_L76L76-L_Hardware_Design_V3.2-1.pdf
+Quectel GPS L76 L76-L
+0
+18
+18
+RF_GPS
+Quectel_L80-R
+Quectel L80-R GPS Module, Patch on Top, https://www.quectel.com/UploadImage/Downlad/Quectel_L80-R_Hardware_Design_V1.2.pdf
+quectel GPS GNSS
+0
+12
+12
+RF_GPS
+Quectel_L96
+Quectel L96 GPS GLONASS Galileo BeiDou Module, internal chip antenna, https://static6.arrow.com/aropdfconversion/50213b4bc5cb920911b62909a5ca765b1c5ab3d1/quectel_l96_hardware_design_v1.2.pdf
+Quectel GPS GNSS
+0
+31
+31
+RF_GPS
+SIM28ML
+https://simcom.ee/documents/SIM28ML/SIM28ML_Hardware%20Design_V1.01.pdf
+SIM28ML GPS
+0
+18
+18
+RF_GPS
+Sierra_XA11X0
+QFN-24, Pitch 1.20 no EP, https://source.sierrawireless.com/resources/airprime/hardware_specs_user_guides/airprime_xm1100_product_technical_specification
+QFN-24 P1.20
+0
+24
+24
+RF_GPS
+Sierra_XM11X0
+QFN-20, Pitch 1.20 no EP, https://source.sierrawireless.com/resources/airprime/hardware_specs_user_guides/airprime_xm1100_product_technical_specification
+QFN-20 P1.20
+0
+20
+20
+RF_GPS
+ublox_LEA
+ublox LEA 6/7/8, (https://www.u-blox.com/sites/default/files/LEA-M8S-M8T-FW3_HardwareIntegrationManual_%28UBX-15030060%29.pdf)
+GPS ublox LEA 6/7/8
+0
+28
+28
+RF_GPS
+ublox_MAX
+ublox MAX 6/7/8, (https://www.u-blox.com/sites/default/files/MAX-8-M8-FW3_HardwareIntegrationManual_%28UBX-15030059%29.pdf)
+GPS ublox MAX 6/7/8
+0
+18
+18
+RF_GPS
+ublox_NEO
+ublox NEO 6/7/8, (https://www.u-blox.com/sites/default/files/NEO-8Q-NEO-M8-FW3_HardwareIntegrationManual_%28UBX-15029985%29_0.pdf)
+GPS ublox NEO 6/7/8
+0
+24
+24
+RF_GPS
+ublox_SAM-M8Q
+GPS Module, 15.5x15.5x6.3mm, https://www.u-blox.com/sites/default/files/SAM-M8Q_HardwareIntegrationManual_%28UBX-16018358%29.pdf
+ublox SAM-M8Q
+0
+100
+20
+RF_GPS
+ublox_SAM-M8Q_HandSolder
+GPS Module, 15.5x15.5x6.3mm, https://www.u-blox.com/sites/default/files/SAM-M8Q_HardwareIntegrationManual_%28UBX-16018358%29.pdf
+ublox SAM-M8Q
+0
+20
+20
+RF_GPS
+ublox_ZED
+ublox ZED-F9, https://www.u-blox.com/sites/default/files/ZED-F9P_DataSheet_%28UBX-17051259%29.pdf
+GPS GNSS ublox ZED
+0
+102
+55
+RF_GPS
+ublox_ZOE_M8
+GPS Ublox ZOE, https://content.u-blox.com/sites/default/files/ZOE-M8_DataSheet_UBX-16008094.pdf
+Ublox GPS GNSS
+0
+51
+51
+RF_GSM
+Quectel_BC66
+GSM NB-IoT module, 15.8x17.7x2mm, https://www.quectel.com/UploadImage/Downlad/Quectel_BC66_Hardware_Design_V1.1.pdf
+GSM NB-IoT Module BC66 M66
+0
+116
+58
+RF_GSM
+Quectel_BC95
+GSM NB-IoT module, 19.9x23.6x2.2mm, https://www.quectel.com/UploadImage/Downlad/Quectel_BC95_Hardware_Design_V1.3.pdf
+GSM NB-IoT module BC95
+0
+188
+94
+RF_GSM
+Quectel_BG95
+Quectel BG95 Cellular GSM NB-IoT Module https://images.quectel.com/python/sites/2/2023/05/Quectel_BG95_Series_QuecOpen_Hardware_Design_V1.3.pdf
+Quectel BG95 Cellular GSM NB-IoT Module
+0
+102
+102
+RF_GSM
+Quectel_BG96
+Quectel BG96 Cellular GSM 2G Module https://www.quectel.com/download/quectel_bg96_hardware_design_v1-4
+Quectel BG96 Cellular GSM 2G Module
+0
+204
+102
+RF_GSM
+Quectel_M95
+Quad-Band GSM/GPRS module, 19.9x23.6x2.65mm, https://www.quectel.com/UploadImage/Downlad/M95_Hardware_Design_V1.3.pdf
+GSM Module M95
+0
+84
+42
+RF_GSM
+SIMCom_SIM800C
+Quad-Band GSM/GPRS module, 17.6x15.7x2.3mm, http://simcom.ee/documents/SIM800C/SIM800C_Hardware_Design_V1.05.pdf
+GSM Module SIM800C
+0
+84
+42
+RF_GSM
+SIMCom_SIM900
+Quad-Band GSM/GPRS module, 24x24x3mm, http://simcom.ee/documents/SIM900/SIM900_Hardware%20Design_V2.05.pdf
+GSM Module SIM900
+0
+68
+68
+RF_GSM
+Telit_SE150A4
+Telit SE150A4 smart module, https://atoma.spb.ru/sites/default/files/documents/telit_se150a4_smart_module_hardware_user_guide_r1.pdf
+Smart module Telit SE150
+0
+466
+210
+RF_GSM
+Telit_xL865
+Telit xL865 familly footprint, http://www.telit.com/fileadmin/user_upload/products/Downloads/3G/Telit_UL865_Hardware_User_Guide_r8.pdf 
+xL865 gsm umts
+0
+52
+48
+RF_GSM
+ublox_LENA-R8_LGA-100
+Multi-mode LTE Cat1 modules, https://content.u-blox.com/sites/default/files/documents/LENA-R8_SysIntegrManual_UBX-22015376.pdf#page=94 and https://content.u-blox.com/sites/default/files/documents/LENA-R8_DataSheet_UBX-22003110.pdf#page=35
+ublox GSM LTE
+0
+200
+100
+RF_GSM
+ublox_SARA_LGA-96
+ublox SARA cellular/GNSS module, https://www.u-blox.com/sites/default/files/SARA-G3-U2_SysIntegrManual_%28UBX-13000995%29.pdf, pag.162
+ublox u-blox SARA-R41 SARA-R42 SARA-R5 SARA-N2 SARA-N3 SARA-G3 SARA-G4 SARA-U2 cellular LTE IoT GSM HSPA GNSS GPS
+0
+192
+96
+RF_Mini-Circuits
+Mini-Circuits_BK377
+Footprint for Mini-Circuits case BK377 (https://ww2.minicircuits.com/case_style/BK276.pdf)
+Mini-circuits BK377
+0
+14
+14
+RF_Mini-Circuits
+Mini-Circuits_BK377_LandPatternPL-005
+Footprint for Mini-Circuits case BK377 (https://ww2.minicircuits.com/case_style/BK276.pdf) according to land-pattern PL-005, including GND vias (https://ww2.minicircuits.com/pcb/98-pl005.pdf)
+Mini-circuits VCXO JTOS PL-005
+0
+50
+14
+RF_Mini-Circuits
+Mini-Circuits_CD541_H2.08mm
+https://ww2.minicircuits.com/case_style/CD541.pdf
+RF Transformer
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_CD542_H2.84mm
+https://ww2.minicircuits.com/case_style/CD542.pdf
+RF Transformer
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_CD542_LandPatternPL-052
+Footprint for Mini-Circuits case CD542 (https://ww2.minicircuits.com/case_style/CD542.pdf) using land-pattern PL-052, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl052.pdf)
+MiniCircuits PL-052 CD542
+0
+17
+6
+RF_Mini-Circuits
+Mini-Circuits_CD542_LandPatternPL-094
+Footprint for mini circuit case CD542, Land pattern PL-094, pads 5 and 2 connected via insulated copper area below body, vias included (case drawing: https://ww2.minicircuits.com/case_style/CD542.pdf, land pattern drawing: https://ww2.minicircuits.com/pcb/98-pl094.pdf)
+mini-circuits CD542 pl-094
+0
+18
+6
+RF_Mini-Circuits
+Mini-Circuits_CD636_H4.11mm
+https://ww2.minicircuits.com/case_style/CD636.pdf
+RF Transformer
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_CD636_LandPatternPL-035
+Footprint for Mini-Circuits case CD636 (https://ww2.minicircuits.com/case_style/CD636.pdf) following land pattern PL-035, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl035.pdf)
+mini-circuits pl-035 CD636
+0
+13
+6
+RF_Mini-Circuits
+Mini-Circuits_CD637_H5.23mm
+https://ww2.minicircuits.com/case_style/CD637.pdf
+RF Transformer
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_CK605
+Footprint for Mini-Circuits case CK605 (https://ww2.minicircuits.com/case_style/CK605.pdf)
+Mini-Circuits CK605
+0
+16
+16
+RF_Mini-Circuits
+Mini-Circuits_CK605_LandPatternPL-012
+Footprint for Mini-Circuits case CK605 (https://ww2.minicircuits.com/case_style/CK605.pdf) following land pattern PL-012, including GND vias (https://ww2.minicircuits.com/pcb/98-pl012.pdf)
+Mini-Circuits PL-012
+0
+53
+16
+RF_Mini-Circuits
+Mini-Circuits_DB1627
+Mini-Circuits top-hat case DB1627 (https://ww2.minicircuits.com/case_style/DB1627.pdf)
+Mini-Circuits DB1627
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_GP731
+Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf)
+Mini-Circuits GP731
+0
+8
+8
+RF_Mini-Circuits
+Mini-Circuits_GP731_LandPatternPL-176
+Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-176, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf)
+mini-circuits PL-176
+0
+21
+8
+RF_Mini-Circuits
+Mini-Circuits_GP1212
+Footprint for Mini-Circuits case GP1212 (https://ww2.minicircuits.com/case_style/GP731.pdf)
+mini-circuits GP1212
+0
+8
+8
+RF_Mini-Circuits
+Mini-Circuits_GP1212_LandPatternPL-176
+Footprint for Mini-Circuits case GP1212 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-176, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf)
+mini-circuits PL-176
+0
+21
+8
+RF_Mini-Circuits
+Mini-Circuits_HF1139
+Footprint for Mini-Circuits case HF1139 (https://ww2.minicircuits.com/case_style/HF1139.pdf)
+Mini-Circuits HF1139
+0
+8
+8
+RF_Mini-Circuits
+Mini-Circuits_HF1139_LandPatternPL-230
+Footprint for Mini-Circuits case HF1139 (https://ww2.minicircuits.com/case_style/HF1139.pdf) following land pattern PL-230, including GND vias (https://ww2.minicircuits.com/pcb/98-pl230.pdf)
+Mini-Circuits PL-230
+0
+37
+8
+RF_Mini-Circuits
+Mini-Circuits_HQ1157
+Footprint for Mini-Circuits case HQ1157 (https://www.minicircuits.com/case_style/HQ1157.pdf)
+Mini-Circuits HQ1157
+0
+14
+14
+RF_Mini-Circuits
+Mini-Circuits_HZ1198
+Footprint for Mini-Circuits case HZ1198 (https://ww2.minicircuits.com/case_style/HZ1198.pdf)
+Mini-Circuits HZ1198
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_HZ1198_LandPatternPL-247
+Footprint for Mini-Circuits cas HZ1198 (https://ww2.minicircuits.com/case_style/HZ1198.pdf) following land pattern PL-247, including GND-vias (https://www.minicircuits.com/pcb/98-pl247.pdf)
+Mini-Circuits PL-247 HZ1198
+0
+40
+6
+RF_Mini-Circuits
+Mini-Circuits_MMM168
+Footprint for Mini-Circuits case MMM168 (https://ww2.minicircuits.com/case_style/MMM168.pdf)
+Mini-Circuits MMM168
+0
+4
+4
+RF_Mini-Circuits
+Mini-Circuits_MMM168_LandPatternPL-225
+Footprint for Mini-Circuits case MMM168, Land pattern PL-225, vias included, (case drawing: https://ww2.minicircuits.com/case_style/MMM168.pdf, land pattern drawing: https://ww2.minicircuits.com/pcb/98-pl225.pdf)
+pl-225
+0
+10
+4
+RF_Mini-Circuits
+Mini-Circuits_QQQ130_ClockwisePinNumbering
+Footprint for Mini-Circuits case QQQ130 (https://ww2.minicircuits.com/case_style/QQQ130.pdf)
+Mini-Circuits QQQ130
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_QQQ130_LandPattern_PL-236_ClockwisePinNumbering
+Footprint for Mini-Circuits case QQQ130 (https://ww2.minicircuits.com/case_style/QQQ130.pdf) following land pattern PL-236, including GND vias (https://ww2.minicircuits.com/pcb/98-pl236.pdf)
+Mini-Circuits PL-236
+0
+14
+6
+RF_Mini-Circuits
+Mini-Circuits_TT1224_ClockwisePinNumbering
+Footprint for Mini-Circuits case TT1224 (https://ww2.minicircuits.com/case_style/TT1224.pdf) following land-pattern PL-258, including GND-vias (https://www.minicircuits.com/pcb/98-pl258.pdf)
+Mini-Circuits TT1224
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_TT1224_LandPatternPL-258_ClockwisePinNumbering
+Footprint for Mini-Circuits case TT1224 (https://ww2.minicircuits.com/case_style/TT1224.pdf) following land-pattern PL-258, including GND-vias (https://www.minicircuits.com/pcb/98-pl258.pdf)
+PL-258 Mini-Circuits
+0
+26
+6
+RF_Mini-Circuits
+Mini-Circuits_TTT167
+Footprint for Mini-Circuits case TTT167 (https://ww2.minicircuits.com/case_style/TTT167.pdf)
+Mini-Circuits TTT167
+0
+6
+6
+RF_Mini-Circuits
+Mini-Circuits_TTT167_LandPatternPL-079
+Footprint for Mini-Circuits case TTT167 (Mini-Circuits_TTT167_LandPatternPL-079) following land pattern PL-079, including GND vias (https://ww2.minicircuits.com/pcb/98-pl079.pdf)
+Mini-Circuits PL-079
+0
+36
+6
+RF_Mini-Circuits
+Mini-Circuits_YY161
+Footprint for Mini-Circuits case YY161 (https://ww2.minicircuits.com/case_style/YY161.pdf)
+Mini-Circuits YY161
+0
+8
+8
+RF_Mini-Circuits
+Mini-Circuits_YY161_LandPatternPL-049
+Footprint for Mini-Circuits case YY161 (https://ww2.minicircuits.com/case_style/YY161.pdf) using land-pattern PL-049, including GND-connections and vias (https://ww2.minicircuits.com/pcb/98-pl049.pdf)
+mini-circuits pl-049
+0
+36
+8
+RF_Module
+Ai-Thinker-Ra-01-LoRa
+Ai Thinker Ra-01 LoRa
+LoRa Ra-01
+0
+16
+16
+RF_Module
+Astrocast_AST50147-00
+L-band satellite communication module, https://docs.astrocast.com/dl/0532-DOC-M2M-ASTRO-Astronode_S-Datasheet.pdf
+RF module Astrocast radio Astronode
+0
+38
+38
+RF_Module
+Atmel_ATSAMR21G18-MR210UA_NoRFPads
+http://ww1.microchip.com/downloads/en/devicedoc/atmel-42475-atsamr21g18-mr210ua_datasheet.pdf
+module wireless zigbee 802.15.4 flash crypto ATSAMR21G18 AT45DB041E  TECC508A U.Fi
+0
+42
+42
+RF_Module
+BLE112-A
+Class 4 Bluetooth Module with on-board antenna
+Bluetooth Module
+0
+30
+30
+RF_Module
+BM78SPPS5xC2
+Bluetooth Dual-mode module with integral chip antenna (http://ww1.microchip.com/downloads/en/DeviceDoc/60001380C.pdf)
+Bluetooth BR/EDR BLE
+0
+33
+33
+RF_Module
+CMWX1ZZABZ
+https://wireless.murata.com/RFM/data/type_abz.pdf
+iot lora sigfox
+0
+57
+57
+RF_Module
+CYBLE-21Pin-10x10mm
+Cypress EZ-BLE PRoC Module (Bluetooth Smart) 21 Pin Module
+Cypress BT Bluetooth
+0
+21
+21
+RF_Module
+DWM1000
+IEEE802.15.4-2011 UWB
+UWB Module
+0
+24
+24
+RF_Module
+DecaWave_DWM1001
+https://www.decawave.com/sites/default/files/dwm1001_datasheet.pdf
+UWB module
+0
+34
+34
+RF_Module
+Digi_XBee_SMT
+http://www.digi.com/resources/documentation/digidocs/pdfs/90002126.pdf http://ftp1.digi.com/support/documentation/90001020_F.pdf
+Digi XBee SMT RF
+0
+37
+37
+RF_Module
+E18-MS1-PCB
+http://www.cdebyte.com/en/downpdf.aspx?id=122
+Zigbee
+0
+24
+24
+RF_Module
+E73-2G4M04S
+http://www.cdebyte.com/en/downpdf.aspx?id=243
+BLE BLE5 nRF52832
+0
+44
+44
+RF_Module
+ESP-01
+Wi-Fi Module, https://docs.ai-thinker.com/_media/esp8266/esp8266_series_modules_user_manual_en.pdf
+Wi-Fi Module
+0
+8
+8
+RF_Module
+ESP-07
+Wi-Fi Module, http://wiki.ai-thinker.com/_media/esp8266/docs/a007ps01a2_esp-07_product_specification_v1.2.pdf
+Wi-Fi Module
+0
+16
+16
+RF_Module
+ESP-12E
+Wi-Fi Module, http://wiki.ai-thinker.com/_media/esp8266/docs/aithinker_esp_12f_datasheet_en.pdf
+Wi-Fi Module
+0
+22
+22
+RF_Module
+ESP-WROOM-02
+https://www.espressif.com/sites/default/files/documentation/0c-esp-wroom-02_datasheet_en.pdf
+ESP WROOM-02 espressif esp8266ex
+0
+19
+19
+RF_Module
+ESP32-C3-DevKitM-1
+2.4 GHz Wi-Fi and Bluetooth module https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitm-1/index.html
+esp32 esp32-c3 riscv risc-v wifi bluetooth ble
+0
+30
+30
+RF_Module
+ESP32-C3-WROOM-02
+RF Module, ESP32-C3 WROOM-02, Wi-Fi and Bluetooth, BLE, onboard antenna, https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf
+ESP32-C3 WROOM-02 espressif
+0
+40
+19
+RF_Module
+ESP32-C3-WROOM-02U
+RF Module, ESP32-C3 WROOM-02 , Wi-Fi and Bluetooth, BLE, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf
+ESP32-C3 WROOM-02 espressif
+0
+40
+19
+RF_Module
+ESP32-C6-MINI-1
+2.4 GHz Wi-Fi, Bluetooth, Zigbee and Thread combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-c6-mini-1_mini-1u_datasheet_en.pdf
+2.4 GHz Wi-Fi Bluetooth Zigbee Thread external antenna espressif  16.6*13.2mm
+0
+61
+53
+RF_Module
+ESP32-S2-MINI-1
+2.4 GHz Wi-Fi and Bluetooth combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf
+2.4 GHz Wi-Fi Bluetooth external antenna espressif  20*15.4mm
+0
+73
+65
+RF_Module
+ESP32-S2-MINI-1U
+2.4 GHz Wi-Fi and Bluetooth combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf
+2.4 GHz Wi-Fi Bluetooth external antenna espressif  15.4*15.4mm
+0
+73
+65
+RF_Module
+ESP32-S2-WROVER
+ESP32-S2-WROVER(-I) 2.4 GHz Wi-Fi https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_en.pdf
+ESP32-S2  ESP32  WIFI
+0
+52
+43
+RF_Module
+ESP32-S3-WROOM-1
+2.4 GHz Wi-Fi and Bluetooth module  https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf
+2.4 GHz Wi-Fi and Bluetooth module
+0
+62
+41
+RF_Module
+ESP32-S3-WROOM-1U
+2.4 GHz Wi-Fi and Bluetooth module  https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf
+2.4 GHz Wi-Fi and Bluetooth module
+0
+62
+41
+RF_Module
+ESP32-S3-WROOM-2
+2.4 GHz Wi­-Fi and Bluetooth 5 (LE) module: https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_en.pdf
+Bluetooth WiFi Wi-Fi ESP WROOM
+0
+61
+41
+RF_Module
+ESP32-WROOM-32
+Single 2.4 GHz Wi-Fi and Bluetooth combo chip https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf
+Single 2.4 GHz Wi-Fi and Bluetooth combo  chip
+0
+60
+39
+RF_Module
+ESP32-WROOM-32D
+2.4 GHz Wi-Fi and Bluetooth module, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32d_esp32-wroom-32u_datasheet_en.pdf
+2.4 GHz Wi-Fi and Bluetooth module ESP32-D0WD Espressif ESP32-WROOM-32E
+0
+60
+39
+RF_Module
+ESP32-WROOM-32E
+2.4 GHz Wi­-Fi and Bluetooth 5 (LE) module: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf
+Bluetooth WiFi Wi-Fi ESP32 WROOM Xtensa LX6
+0
+59
+39
+RF_Module
+ESP32-WROOM-32U
+Single 2.4 GHz Wi-Fi and Bluetooth combo chip with U.FL connector, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32d_esp32-wroom-32u_datasheet_en.pdf
+Single 2.4 GHz Wi-Fi and Bluetooth combo  chip
+0
+60
+39
+RF_Module
+ESP32-WROOM-32UE
+2.4 GHz Wi-Fi and Bluetooth module, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf
+2.4 GHz Wi-Fi and Bluetooth module
+0
+60
+39
+RF_Module
+Garmin_M8-35_9.8x14.0mm_Layout6x6_P1.5mm
+D52M ANT SoC Module https://www.thisisant.com/assets/resources/D00001687_D52_Module_Datasheet.v.2.3_(Garmin).pdf
+RF SoC Radio ANT Bluetooth BLE D52 nRF52 Garmin Canada Dynastream Nordic
+0
+35
+35
+RF_Module
+HOPERF_RFM9XW_SMD
+Low Power Long Range Transceiver Module SMD-16 (https://www.hoperf.com/data/upload/portal/20181127/5bfcbea20e9ef.pdf)
+LoRa Low Power Long Range Transceiver Module
+0
+16
+16
+RF_Module
+HOPERF_RFM9XW_THT
+Low Power Long Range Transceiver Module THT-16 (https://www.hoperf.com/data/upload/portal/20181127/5bfcbea20e9ef.pdf)
+Low Power Long Range Transceiver Module LoRa
+0
+16
+16
+RF_Module
+HOPERF_RFM69HW
+Radio, RF, Module, http://www.hoperf.com/upload/rf/RFM69HW-V1.3.pdf
+Radio RF Module
+0
+16
+16
+RF_Module
+Heltec_HT-CT62
+HT-CT62 LoRa Module
+LoRa WiFi Heltec HT-CT62 ESP32C3
+0
+22
+22
+RF_Module
+IQRF_TRx2DA_KON-SIM-01
+8 pin SIM connector for IQRF TR-x2DA(T) modules, http://iqrf.org/weben/downloads.php?id=104
+IQRF_KON-SIM-01 IQRF_TRx2DA
+0
+10
+8
+RF_Module
+IQRF_TRx2D_KON-SIM-01
+8 pin SIM connector for IQRF TR-x2D(C)(T) modules, http://iqrf.org/weben/downloads.php?id=104
+IQRF_KON-SIM-01 IQRF_TRx2D IQRF_TRx2DC
+0
+10
+8
+RF_Module
+Jadak_Thingmagic_M6e-Nano
+UHF RFID reader with one 27dBm antenna port, https://www.jadaktech.com/product/thingmagic-m6e-nano-uhf-rain-rfid/
+Jadak Thingmagic M6e
+0
+96
+41
+RF_Module
+Laird_BL652
+Bluetooth v4.2 + NFC module
+Bluetooth BLE NFC
+0
+39
+39
+RF_Module
+MCU_Seeed_ESP32C3
+ESP32C3 Seeed Xiao RF Wifi Shield (https://www.seeedstudio.com/blog/wp-content/uploads/2022/08/Seeed-Studio-XIAO-Series-Package-and-PCB-Design.pdf)
+wifi bluetooth microcontroller
+0
+27
+23
+RF_Module
+MOD-nRF8001
+BLE module, https://www.olimex.com/Products/Modules/RF/MOD-nRF8001/
+BLE module
+0
+11
+11
+RF_Module
+Microchip_BM83
+Microchip BM83, Bluetooth 5.0 Stereo Audio Module with on-Board antenna, https://ww1.microchip.com/downloads/aemDocuments/documents/WSG/ProductDocuments/DataSheets/70005402E.pdf
+bluetooth module
+0
+52
+52
+RF_Module
+Microchip_RN4871
+Microchip RN4871 footprint
+RN4871 BLE
+0
+16
+16
+RF_Module
+Modtronix_inAir9
+Modtronix Wireless SX1276 LoRa Module (http://modtronix.com/img/prod/imod/inair9/inair_dimensions.gif)
+Modtronix LoRa inAir inAir9 SX1276 RF 915MHz 868MHz Wireless
+0
+14
+14
+RF_Module
+MonoWireless_TWE-L-WX
+https://www.mono-wireless.com/jp/products/TWE-LITE/MW-PDS-TWELITE-JP.pdf
+TWE-L-WX
+0
+32
+32
+RF_Module
+NINA-B111
+NINA-B111 LGA module 42 Pin https://content.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf#page=30
+NINA ublox u-blox b111 bluetooth nrf52840 module
+0
+42
+42
+RF_Module
+Particle_P1
+https://docs.particle.io/datasheets/p1-datasheet/
+Particle P1
+0
+75
+75
+RF_Module
+RAK811
+RAK811 LPWAN Module https://downloads.rakwireless.com/LoRa/RAK811/Hardware_Specification/RAK811_LoRa_Module_Datasheet_V1.4.pdf
+LoRa LoRaWAN RAK811
+0
+34
+34
+RF_Module
+RAK3172
+RAK3172 WisDuo LPWAN Module https://docs.rakwireless.com/product-categories/wisduo/rak3172-module/datasheet/
+LoRa LoRaWAN RAK3172
+0
+32
+32
+RF_Module
+RAK4200
+RAK4200 LPWAN Module https://downloads.rakwireless.com/LoRa/RAK4200/Hardware-Specification/RAK4200_Module_Specifications_V1.4.pdf
+LoRa LoRaWAN RAK4200
+0
+20
+20
+RF_Module
+RFDigital_RFD77101
+RFDigital RFD77101 Simblee
+RFDigital RFD77101 Simblee
+0
+45
+45
+RF_Module
+RN42
+Class 2 Bluetooth Module with on-board antenna
+Bluetooth Module
+0
+36
+33
+RF_Module
+RN42N
+Class 2 Bluetooth Module without antenna
+Bluetooth Module
+0
+39
+36
+RF_Module
+RN2483
+Low-Power Long Range LoRa Transceiver Module
+rf module lora lorawan
+0
+47
+47
+RF_Module
+Raytac_MDBT42Q
+Multiprotocol radio SoC module https://www.raytac.com/download/index.php?index_id=27
+wireless 2.4 GHz Bluetooth ble zigbee 802.15.4 thread nordic raytac nrf52832
+0
+41
+41
+RF_Module
+Raytac_MDBT50Q
+Multiprotocol radio SoC module https://www.raytac.com/download/index.php?index_id=43
+wireless 2.4 GHz Bluetooth ble zigbee 802.15.4 thread nordic raytac nrf52840 nrf52833
+0
+61
+61
+RF_Module
+ST-SiP-LGA-86-11x7.3mm
+STM32WB5MMG  Module, LGA86L 11x7.3
+bluetooth bluetooth5 bluetooth5.0 802.15.4 zigbee thread module stm32 rf
+0
+86
+86
+RF_Module
+ST_SPBTLE
+Bluetooth Low Energy Module
+ble module st bluetooth
+0
+11
+11
+RF_Module
+TD1205
+https://github.com/Telecom-Design/Documentation_TD_RF_Module/blob/master/TD1205%20Datasheet.pdf
+SIGFOX Module
+0
+9
+9
+RF_Module
+TD1208
+https://github.com/Telecom-Design/Documentation_TD_RF_Module/blob/master/TD1208%20Datasheet.pdf
+SIGFOX Module
+0
+25
+25
+RF_Module
+Taiyo-Yuden_EYSGJNZWY
+Taiyo Yuden NRF51822 Module Bluetooth https://www.yuden.co.jp/wireless_module/document/datareport2/en/TY_BLE_EYSGJNZ_DataReport_V1_9_20180530E.pdf
+Taiyo Yuden NRF51822 Module Bluetooth 
+0
+30
+28
+RF_Module
+WEMOS_C3_mini
+16-pin module, column spacing 22.86 mm (900 mils), https://www.wemos.cc/en/latest/_static/files/dim_c3_mini_v1.0.0.pdf
+ESP32-C3 WiFi microcontroller
+0
+16
+16
+RF_Module
+WEMOS_D1_mini_light
+16-pin module, column spacing 22.86 mm (900 mils), https://wiki.wemos.cc/products:d1:d1_mini, https://c1.staticflickr.com/1/734/31400410271_f278b087db_z.jpg
+ESP8266 WiFi microcontroller
+0
+16
+16
+RF_Module
+ZETA-433-SO_SMD
+RF transceiver SMD style https://www.rfsolutions.co.uk/downloads/1456219226DS-ZETA.pdf
+RF transceiver SMD style
+0
+12
+12
+RF_Module
+ZETA-433-SO_THT
+RF transceiver THT style https://www.rfsolutions.co.uk/downloads/1456219226DS-ZETA.pdf
+RF transceiver SMD style
+0
+12
+12
+RF_Module
+nRF24L01_Breakout
+nRF24L01 breakout board
+nRF24L01 adapter breakout
+0
+8
+8
+RF_Shielding
+Laird_Technologies_97-2002_25.40x25.40mm
+Laird Technologies 97-2002 EZ PEEL Shielding Cabinet One Piece SMD 25.40x25.40mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+8
+1
+RF_Shielding
+Laird_Technologies_97-2003_12.70x13.37mm
+Laird Technologies 97-2003 EZ PEEL Shielding Cabinet One Piece SMD 12.70x13.37mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+8
+1
+RF_Shielding
+Laird_Technologies_BMI-S-101_13.66x12.70mm
+Laird Technologies BMI-S-101 Shielding Cabinet One Piece SMD 13.66x12.70mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+16
+1
+RF_Shielding
+Laird_Technologies_BMI-S-102_16.50x16.50mm
+Laird Technologies BMI-S-102 Shielding Cabinet One Piece SMD 16.50x16.50mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+16
+1
+RF_Shielding
+Laird_Technologies_BMI-S-103_26.21x26.21mm
+Laird Technologies BMI-S-103 Shielding Cabinet One Piece SMD 26.21x26.21mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+24
+1
+RF_Shielding
+Laird_Technologies_BMI-S-104_32.00x32.00mm
+Laird Technologies BMI-S-104 Shielding Cabinet One Piece SMD 32.00x32.00mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-105_38.10x25.40mm
+Laird Technologies BMI-S-105 Shielding Cabinet One Piece SMD 38.10x25.40mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-106_36.83x33.68mm
+Laird Technologies BMI-S-106 Shielding Cabinet One Piece SMD 36.83x33.68mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-107_44.37x44.37mm
+Laird Technologies BMI-S-107 Shielding Cabinet One Piece SMD 44.37x44.37mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+36
+1
+RF_Shielding
+Laird_Technologies_BMI-S-201-F_13.66x12.70mm
+Laird Technologies BMI-S-201-F Shielding Cabinet Two Piece SMD 13.66x12.70mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+16
+1
+RF_Shielding
+Laird_Technologies_BMI-S-202-F_16.50x16.50mm
+Laird Technologies BMI-S-202-F Shielding Cabinet Two Piece SMD 16.50x16.50mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+16
+1
+RF_Shielding
+Laird_Technologies_BMI-S-203-F_26.21x26.21mm
+Laird Technologies BMI-S-203-F Shielding Cabinet Two Piece SMD 26.21x26.21mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+24
+1
+RF_Shielding
+Laird_Technologies_BMI-S-204-F_32.00x32.00mm
+Laird Technologies BMI-S-204-F Shielding Cabinet Two Piece SMD 32.00x32.00mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-205-F_38.10x25.40mm
+Laird Technologies BMI-S-205-F Shielding Cabinet Two Piece SMD 38.10x25.40mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-206-F_36.83x33.68mm
+Laird Technologies BMI-S-206-F Shielding Cabinet Two Piece SMD 36.83x33.68mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Laird_Technologies_BMI-S-207-F_44.37x44.37mm
+Laird Technologies BMI-S-207-F Shielding Cabinet Two Piece SMD 44.37x44.37mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+36
+1
+RF_Shielding
+Laird_Technologies_BMI-S-208-F_39.60x39.60mm
+Laird Technologies BMI-S-208-F Shielding Cabinet Two Piece SMD 39.60x39.60mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+32
+1
+RF_Shielding
+Laird_Technologies_BMI-S-209-F_29.36x18.50mm
+Laird Technologies BMI-S-209-F Shielding Cabinet Two Piece SMD 29.36x18.50mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+20
+1
+RF_Shielding
+Laird_Technologies_BMI-S-210-F_44.00x30.50mm
+Laird Technologies BMI-S-210-F Shielding Cabinet Two Piece SMD 44.00x30.50mm, http://cdn.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf
+Shielding Cabinet
+0
+32
+1
+RF_Shielding
+Laird_Technologies_BMI-S-230-F_50.8x38.1mm
+Laird Technologies BMI-S-230-F Shielding Cabinet Two Piece SMD 50.8x38.1mm, https://media.digikey.com/pdf/Data%20Sheets/Laird%20Technologies/BMI-S-230-F_Dwg.pdf
+Shielding Cabinet
+0
+36
+1
+RF_Shielding
+Wuerth_36103205_20x20mm
+WE-SHC Shielding Cabinet SMD 20x20mm, http://katalog.we-online.com/pbs/datasheet/36103205.pdf
+Shielding Cabinet
+0
+20
+1
+RF_Shielding
+Wuerth_36103255_25x25mm
+WE-SHC Shielding Cabinet SMD 25x25mm, http://katalog.we-online.com/pbs/datasheet/36103255.pdf
+Shielding Cabinet
+0
+24
+1
+RF_Shielding
+Wuerth_36103305_30x30mm
+WE-SHC Shielding Cabinet SMD 30x30mm, http://katalog.we-online.com/pbs/datasheet/36103305.pdf
+Shielding Cabinet
+0
+28
+1
+RF_Shielding
+Wuerth_36103505_50x50mm
+WE-SHC Shielding Cabinet SMD 50x50mm, http://katalog.we-online.com/pbs/datasheet/36103505.pdf
+Shielding Cabinet
+0
+44
+1
+RF_Shielding
+Wuerth_36103605_60x60mm
+WE-SHC Shielding Cabinet SMD 60x60mm, http://katalog.we-online.com/pbs/datasheet/36103605.pdf
+Shielding Cabinet
+0
+52
+1
+RF_Shielding
+Wuerth_36503205_20x20mm
+WE-SHC Shielding Cabinet THT 21x21mm
+Shielding Cabinet
+0
+16
+1
+RF_Shielding
+Wuerth_36503255_25x25mm
+WE-SHC Shielding Cabinet THT 26x26mm
+Shielding Cabinet
+0
+20
+1
+RF_Shielding
+Wuerth_36503305_30x30mm
+WE-SHC Shielding Cabinet THT 31x31mm
+Shielding Cabinet
+0
+24
+1
+RF_Shielding
+Wuerth_36503505_50x50mm
+WE-SHC Shielding Cabinet THT 51x51mm
+Shielding Cabinet
+0
+40
+1
+RF_Shielding
+Wuerth_36503605_60x60mm
+WE-SHC Shielding Cabinet THT 61x61mm
+Shielding Cabinet
+0
+48
+1
+RF_WiFi
+USR-C322
+https://www.usriot.com/download/WIFI/USR-C322-Hardware-Manual_V1.2.01.pdf
+WiFi IEEE802.11 b/g/n
+0
+44
+44
+Relay_SMD
+Relay_2P2T_10x6mm_TE_IMxxG
+Signal Relay, 10x6mm, 2 Form C, Gull Wings, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7F108-98001%7FZ.1%7Fpdf%7FEnglish%7FENG_DS_108-98001_Z.1.pdf
+TE IM-Series Relay DPDT Form C
+0
+8
+8
+Relay_SMD
+Relay_DPDT_AXICOM_IMSeries_JLeg
+http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F108-98001%7FW5%7Fpdf%7FEnglish%7FENG_SS_108-98001_W5.pdf
+AXICOM IM-Series Relay J JLeg
+0
+8
+8
+Relay_SMD
+Relay_DPDT_FRT5_SMD
+IM Signal Relay DPDT FRT5 narrow footprint, SMD version of package
+Relay DPDT IM-relay FRT5
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NU
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double coil latching surface mount SMD
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NUH
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double coil latching surface mount SMD
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NUH_DoubleCoil
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NUX_DoubleCoil
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NUX_NKX
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double coil latching surface mount SMD
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Kemet_EE2_NU_DoubleCoil
+Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Omron_G6H-2F
+package for Omron G6H-2F relais, see http://cdn-reichelt.de/documents/datenblatt/C300/G6H%23OMR.pdf
+Omron G6H-2F relais
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Omron_G6K-2F
+Omron G6K-2F relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2F relay
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6K-2F-Y
+Omron G6K-2F-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2F-Y relay
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6K-2G
+Omron G6K-2G relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2G relay
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6K-2G-Y
+Omron G6K-2G-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2G-Y relay
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6S-2F
+Relay Omron G6S-2F, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6S-2F
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6S-2G
+Relay Omron G6S-2G, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6S-2G
+0
+8
+8
+Relay_SMD
+Relay_DPDT_Omron_G6SK-2F
+Relay Omron G6SK-2F, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6SK-2F
+0
+10
+10
+Relay_SMD
+Relay_DPDT_Omron_G6SK-2G
+Relay Omron G6SK-2G, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6SK-2G
+0
+10
+10
+Relay_SMD
+Relay_Fujitsu_FTR-B3S
+https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-b3.pdf
+Fujitsh FTR B3S B3SA Relay J JLeg
+0
+8
+8
+Relay_SMD
+Relay_SPDT_AXICOM_HF3Series_50ohms_Pitch1.27mm
+hiqsdr.com/images/3/3e/Axicom-HF3.pdf
+AXICOM HF3-Series Relay Pitch 1.27mm 50ohms
+0
+16
+16
+Relay_SMD
+Relay_SPDT_AXICOM_HF3Series_75ohms_Pitch1.27mm
+hiqsdr.com/images/3/3e/Axicom-HF3.pdf
+AXICOM HF3-Series Relay Pitch 1.27mm 75ohm
+0
+16
+16
+Relay_THT
+Relay_1-Form-A_Schrack-RYII_RM5mm
+Relay, 1-Form-A, Schrack-RYII, RM5mm, SPST-NO
+Relay 1-Form-A Schrack-RYII RM5mm SPST-NO
+0
+4
+4
+Relay_THT
+Relay_1-Form-B_Schrack-RYII_RM5mm
+Relay, 1-Form-B, Schrack-RYII, RM5mm, SPST-NC
+Relay 1-Form-B Schrack-RYII RM5mm SPST-NC
+0
+4
+4
+Relay_THT
+Relay_1-Form-C_Schrack-RYII_RM3.2mm
+Relay, 1-Form-C, Schrack-RYII, RM3.2mm, SPDT
+Relay 1-Form-C Schrack-RYII RM3.2mm SPDT
+0
+5
+5
+Relay_THT
+Relay_3PST_COTO_3650
+Low thermal EMF 3PST-NO reed relay, 150V 0.25A, similar to 3660 but with independent shield, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf
+reed relay low thermal emf
+0
+9
+9
+Relay_THT
+Relay_3PST_COTO_3660
+Low thermal EMF 3PST-NO reed relay, 150V 0.25A, similar to 3650 but with shared shield/contact, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf
+reed relay low thermal emf
+0
+8
+8
+Relay_THT
+Relay_DPDT_AXICOM_IMSeries_Pitch3.2mm
+AXICOM IM-Series Relays, DPDR, Pitch 3.2mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F108-98001%7FV%7Fpdf%7FEnglish%7FENG_SS_108-98001_V_IM_0614_v1.pdf%7F4-1462039-1
+AXICOM IM-Series Relay DPDR Pitch 3.2mm
+0
+8
+8
+Relay_THT
+Relay_DPDT_AXICOM_IMSeries_Pitch5.08mm
+AXICOM IM-Series Relays, DPDR, Pitch 5.08
+AXICOM IM-Series Relay DPDR Pitch 5.08
+0
+8
+8
+Relay_THT
+Relay_DPDT_FRT5
+IM Signal Relay DPDT FRT5 narrow footprint
+Relay DPDT IM-relay FRT5
+0
+10
+10
+Relay_THT
+Relay_DPDT_Finder_30.22
+Finder 32.21-x000 Relay, DPDT, https://gfinder.findernet.com/public/attachments/30/EN/S30EN.pdf
+AXICOM IM-Series Relay SPDT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Finder_40.52
+DPDT relay, Finder 40.52, 8A, 250V, body size 29x12.4mm, height 25mm, pitch 5x7.5mm, https://cdn.findernet.com/app/uploads/S40EN.pdf
+2-Form-C
+0
+8
+8
+Relay_THT
+Relay_DPDT_Finder_40.62
+DPDT relay, Finder 40.62, 10A, 250V, body size 29x12.4mm, height 25mm, pitch 5x7.5mm, https://cdn.findernet.com/app/uploads/S40EN.pdf
+2-Form-C
+0
+8
+8
+Relay_THT
+Relay_DPDT_Fujitsu_FTR-F1C
+https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-f1.pdf
+relay dpdt fujitsu tht
+0
+8
+8
+Relay_THT
+Relay_DPDT_Hongfa_HF115F-2Z-x4
+Hongfa DPDT power relay, 8A, 250VAC, body size 29x127.x15.7mm, https://source.hongfa.com//pdf/web/viewer.html?file=/Uploads/Product/PDF/HF115F_I_en.pdf
+2-Form-C
+0
+8
+8
+Relay_THT
+Relay_DPDT_Kemet_EC2_NJ
+Kemet signal relay, DPDT, non-latching, single coil latching, 2.8mm pin height, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT non single coil latching through hole THT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Kemet_EC2_NJ_DoubleCoil
+Kemet signal relay, DPDT, double coil latching, 2.8mm pin height, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double dual coil latching through hole THT
+0
+10
+10
+Relay_THT
+Relay_DPDT_Kemet_EC2_NU
+Kemet signal relay, DPDT, non-latching, single coil latching, 3.2mm pin height, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT non single coil latching through hole THT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Kemet_EC2_NU_DoubleCoil
+Kemet signal relay, DPDT, double coil latching, 3.2mm pin height, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf
+Kemet EC2 signal relay DPDT double dual coil latching through hole THT
+0
+10
+10
+Relay_THT
+Relay_DPDT_Omron_G2RL-2
+Omron Relay, DPDT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay DPDT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G5V-2
+http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v2.pdf
+Omron G5V-2 Relay DPDT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G6A
+DPDT signal relay, Omron G6A/G6AU, 20x9.9x8.2mm https://omronfs.omron.com/en_US/ecb/products/pdf/en-g6a.pdf
+Omron G6A Relay DPDT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G6AK
+DPDT signal relay, double-winding latching, Omron G6AK, 20x9.9x8.2mm https://omronfs.omron.com/en_US/ecb/products/pdf/en-g6a.pdf
+Omron G6AK Relay DPDT
+0
+10
+10
+Relay_THT
+Relay_DPDT_Omron_G6H-2
+Omron relay G6H-2, see http://cdn-reichelt.de/documents/datenblatt/C300/G6H%23OMR.pdf
+Omron relay G6H-2
+0
+10
+10
+Relay_THT
+Relay_DPDT_Omron_G6K-2P
+Omron G6K-2P relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2P relay
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G6K-2P-Y
+Omron G6K-2P-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf
+Omron G6K-2P-Y relay
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G6S-2
+Relay Omron G6S-2, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6S-2
+0
+8
+8
+Relay_THT
+Relay_DPDT_Omron_G6SK-2
+Relay Omron G6SK-2, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf
+Relay Omron G6SK-2
+0
+10
+10
+Relay_THT
+Relay_DPDT_Panasonic_JW2
+Panasonic Relay DPDT, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok
+Panasonic Relay DPDT
+0
+8
+8
+Relay_THT
+Relay_DPDT_Schrack-RT2-FormC-Dual-Coil_RM5mm
+Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FRT2_bistable%7F1116%7Fpdf%7FEnglish%7FENG_DS_RT2_bistable_1116.pdf%7F1-1415537-8
+Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Relay
+0
+9
+9
+Relay_THT
+Relay_DPDT_Schrack-RT2-FormC_RM5mm
+Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN
+Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Relay
+0
+8
+8
+Relay_THT
+Relay_DPST_COTO_3602
+Low thermal EMF DPST-NO reed relay, 150V 0.25A, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf
+reed relay low thermal emf
+0
+7
+7
+Relay_THT
+Relay_DPST_Fujitsu_FTR-F1A
+https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-f1.pdf
+relay dpst fujitsu tht
+0
+6
+6
+Relay_THT
+Relay_DPST_Omron_G2RL-2A
+Omron Relay, DPST, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay DPST
+0
+6
+6
+Relay_THT
+Relay_DPST_Schrack-RT2-FormA_RM5mm
+Relay DPST Schrack-RT2 RM5mm 16A 250V AC Form A http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN
+Relay DPST Schrack-RT2 RM5mm 16A 250V AC Relay
+0
+6
+6
+Relay_THT
+Relay_NCR_HHG1D-1
+NCR solid state relay 1A, 2A, 3A, 4A, https://ncr.hk/uploads/Relays/Solid_State_Relays/HHG1D-1.pdf
+ssr
+0
+4
+4
+Relay_THT
+Relay_SPDT_Finder_32.21-x000
+Finder 32.21-x000 Relay, SPDT, https://gfinder.findernet.com/assets/Series/355/S32EN.pdf
+AXICOM IM-Series Relay SPDT
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_34.51_Horizontal
+Relay SPDT, Finder Type34.51, horizontal form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf
+Relay SPDT Finder
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_34.51_Vertical
+Relay SPDT, Finder Type34.51, vertical/standing form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf
+Relay SPDT Finder
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_36.11
+FINDER 36.11, SPDT relay, 10A, https://cdn.findernet.com/app/uploads/S36EN.pdf
+spdt relay
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_40.11
+Relay SPDT Finder 40.11, 10/16A, 250V, body size 28.5x26.3mm, height 12.7mm, https://web.archive.org/web/20170816081018if_/https://www.finder-relais.net/de/finder-relais-serie-40.pdf
+1-Form-C
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_40.31
+DPDT relay, Finder 40.52, 10/12A, 250V, body size 29x12.4mm, height 25mm, pitch 3.5x7.5mm, https://cdn.findernet.com/app/uploads/S40EN.pdf
+1-Form-C
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_40.41
+Relay SPDT Finder 40.11, 10A, 250V, body size 28.5x12.3mm, height 26.3mm, https://web.archive.org/web/20170816081018if_/https://www.finder-relais.net/de/finder-relais-serie-40.pdf
+1-Form-C
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_40.51
+SPDT relay, Finder 40.52, 10/12A, 250V, body size 29x12.4mm, height 25mm, pitch 5x7.5mm, https://cdn.findernet.com/app/uploads/S40EN.pdf
+1-Form-C
+0
+5
+5
+Relay_THT
+Relay_SPDT_Finder_40.61
+SPDT relay, Finder 40.61, 16A, 250V, body size 29x12.4mm, height 25mm, pitch 5x7.5mm, https://cdn.findernet.com/app/uploads/S40EN.pdf
+2-Form-C
+0
+8
+8
+Relay_THT
+Relay_SPDT_Fujitsu_FTR-LYCA005x_FormC_Vertical
+Relay, SPDT Form C, vertical mount, 6A, 5-60V, https://www.fujitsu.com/sg/imagesgig5/ftr-ly.pdf
+relay SPDT form c vertical
+0
+5
+5
+Relay_THT
+Relay_SPDT_HJR-4102
+IM Signal Relay SPDT HJR-4102
+Relay SPDT IM-relay HJR-4102
+0
+6
+6
+Relay_THT
+Relay_SPDT_Hongfa_HF3F-L-xx-1ZL1T
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 10A switching current, Form-C https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-c 1-coil 
+0
+5
+5
+Relay_THT
+Relay_SPDT_Hongfa_HF3F-L-xx-1ZL2T
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 10A switching current, Form-C https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-c 2-coil 
+0
+6
+6
+Relay_THT
+Relay_SPDT_Hongfa_HF3F-L-xx-1ZL2T-R
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 10A switching current, reverse polarity, Form-C https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-c 2-coil reverse-polarity
+0
+6
+6
+Relay_THT
+Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z
+Hongfa subminature high power latching SPDT relay 5, 6, 9, 12, 18, 24, 48VDC. 10A switching current, Form-B https://www.generationrobots.com/media/JQC-3FF-v1.pdf
+relays Hongmei 1-coil
+0
+5
+5
+Relay_THT
+Relay_SPDT_HsinDa_Y14
+http://www.hsinda.com.tw/upload/file/Y14-20200430135145.pdf
+Relay Y14
+0
+6
+6
+Relay_THT
+Relay_SPDT_Omron-G5LE-1
+Omron Relay SPDT, http://www.omron.com/ecb/products/pdf/en-g5le.pdf
+Omron Relay SPDT
+0
+5
+5
+Relay_THT
+Relay_SPDT_Omron-G5Q-1
+Relay SPDT Omron Serie G5Q, http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5q.pdf
+Relay SPDT Omron Serie G5Q
+0
+5
+5
+Relay_THT
+Relay_SPDT_Omron_G2RL-1
+Omron Relay, SPDT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay SPDT
+0
+5
+5
+Relay_THT
+Relay_SPDT_Omron_G2RL-1-E
+Omron Relay, SPDT, High Capacity, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay SPDT High Capacity
+0
+8
+5
+Relay_THT
+Relay_SPDT_Omron_G5V-1
+Relay Omron G5V-1, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v_1.pdf
+Relay Omron G5V-1
+0
+6
+6
+Relay_THT
+Relay_SPDT_Omron_G6E
+Relay SPDT Omron Serie G6E
+Relay SPDT Omron Serie G6E 1x um
+0
+5
+5
+Relay_THT
+Relay_SPDT_Omron_G6EK
+Relay SPDT Omron Serie G6EK, see http://www.logosfoundation.org/instrum_gwr/pi/Omron_G6E_134P.pdf
+Relay SPDT Omron Serie G6EK
+0
+6
+6
+Relay_THT
+Relay_SPDT_Panasonic_DR
+1 side stable, https://mediap.industry.panasonic.eu/assets/download-files/import/ds_dr_en_discon.pdf
+nais single side
+0
+6
+6
+Relay_THT
+Relay_SPDT_Panasonic_DR-L
+1 latching coil, https://mediap.industry.panasonic.eu/assets/download-files/import/ds_dr_en_discon.pdf
+nais single latch
+0
+6
+6
+Relay_THT
+Relay_SPDT_Panasonic_DR-L2
+2 separated latching coils, S and R, https://mediap.industry.panasonic.eu/assets/download-files/import/ds_dr_en_discon.pdf
+nais dual latch set reset
+0
+8
+8
+Relay_THT
+Relay_SPDT_Panasonic_JW1_FormC
+Panasonic Relay SPDT, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok
+Panasonic Relay SPDT
+0
+5
+5
+Relay_THT
+Relay_SPDT_PotterBrumfield_T9AP5D52_12V30A
+Relay SPDT Potter&Brumfield T9AP5D52 12V 30A 1xUn Connector Fast ON Only Dummy for Space NO Pads
+Relay SPDT Potter&Brumfield T9AP5D52 12V 30A 1xUm Connector Fast ON Flachsteckeranschluss Only Dummy for Space NO Pads
+0
+0
+0
+Relay_THT
+Relay_SPDT_RAYEX-L90
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90 SPDT
+0
+6
+6
+Relay_THT
+Relay_SPDT_RAYEX-L90S
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90S SPDT
+0
+5
+5
+Relay_THT
+Relay_SPDT_SANYOU_SRD_Series_Form_C
+relay Sanyou SRD series Form C http://www.sanyourelay.ca/public/products/pdf/SRD.pdf
+relay Sanyu SRD form C
+0
+5
+5
+Relay_THT
+Relay_SPDT_Schrack-RP-II-1-16A-FormC_RM5mm
+Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf
+Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Relay
+0
+8
+5
+Relay_THT
+Relay_SPDT_Schrack-RP-II-1-FormC_RM3.5mm
+Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf
+Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Relay
+0
+5
+5
+Relay_THT
+Relay_SPDT_Schrack-RP-II-1-FormC_RM5mm
+Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf
+Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Relay
+0
+5
+5
+Relay_THT
+Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm
+Relay SPST Schrack-RT1 RM5mm 16A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf
+Relay SPST Schrack-RT1 RM5mm 16A 250V AC Relay
+0
+8
+5
+Relay_THT
+Relay_SPDT_Schrack-RT1-FormC_RM3.5mm
+Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf
+Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Relay
+0
+5
+5
+Relay_THT
+Relay_SPDT_Schrack-RT1-FormC_RM5mm
+Relay SPST Schrack-RT1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf
+Relay SPST Schrack-RT1 RM5mm 8A 250V AC Relay
+0
+5
+5
+Relay_THT
+Relay_SPDT_StandexMeder_SIL_Form1C
+Standex-Meder SIL-relais, Form 1C, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf
+Standex Meder SIL reed relais
+0
+5
+5
+Relay_THT
+Relay_SPST-NO_Fujitsu_FTR-LYAA005x_FormA_Vertical
+Relay, SPST-NO Form A, vertical mount, 6A, 5-60V, https://www.fujitsu.com/sg/imagesgig5/ftr-ly.pdf
+relay SPST-NO form A vertical
+0
+4
+4
+Relay_THT
+Relay_SPST_Finder_32.21-x300
+Finder 32.21-x300 Relay, SPST, https://gfinder.findernet.com/assets/Series/355/S32EN.pdf
+Finder 32.21-x300 Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_Hongfa_HF3F-L-xx-1HL1T
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 15A switching current, Form-A https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-a 1-coil 
+0
+4
+4
+Relay_THT
+Relay_SPST_Hongfa_HF3F-L-xx-1HL2T
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 15A switching current, Form-A https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-a 2-coil 
+0
+5
+5
+Relay_THT
+Relay_SPST_Hongfa_HF3F-L-xx-1HL2T-R
+Hongfa subminature high power latching relay 5, 6, 9, 12, 24, 48VDC. 15A switching current, Form-A, reverse polarity, https://source.hongfa.com//Api/DownloadPdf/362
+relays Hongfa form-a 2-coil reverse-polarity
+0
+5
+5
+Relay_THT
+Relay_SPST_Hongfa_JQC-3FF_0XX-1H
+Hongfa subminature high power latching SPST-NO relay 5, 6, 9, 12, 18, 24, 48VDC. 15A switching current, Form-A https://www.generationrobots.com/media/JQC-3FF-v1.pdf
+relays Hongmei 1-coil
+0
+4
+4
+Relay_THT
+Relay_SPST_Omron-G5Q-1A
+Relay SPST-NO Omron Serie G5Q, http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5q.pdf
+Relay SPST-NO Omron Serie G5Q
+0
+4
+4
+Relay_THT
+Relay_SPST_Omron_G2RL-1A
+Omron Relay, SPST, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_Omron_G2RL-1A-E
+Omron Relay, SPST, High Capacity,  https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf
+Omron Relay SPST High Capacity
+0
+6
+4
+Relay_THT
+Relay_SPST_Omron_G5NB
+PCB Power Relay, SPST-NO, 7A (250 VAC), 5A (30 VDC), 20.5x7.2x15.3mm max
+Omron G5NB Relay SPST-NO
+0
+4
+4
+Relay_THT
+Relay_SPST_Omron_G5PZ
+Relay Omron G5PZ, see https://components.omron.com/us-en/sites/components.omron.com.us/files/datasheet_pdf/K320-E1.pdf
+Relay Omron G5PZ
+0
+4
+4
+Relay_THT
+Relay_SPST_Panasonic_ADW11
+Panasonic power relay, SPST, latching, 10x24mm, 18.8mm height, https://api.pim.na.industrial.panasonic.com/file_stream/main/fileversion/270
+Panasonic Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_Panasonic_ALFG_FormA
+Panasonic Relay SPST, https://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_lfg.pdf
+Panasonic Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_Panasonic_ALFG_FormA_CircularHoles
+Panasonic Relay SPST, https://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_lfg.pdf
+Panasonic Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_Panasonic_JW1_FormA
+Panasonic Relay SPST, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok
+Panasonic Relay SPST
+0
+4
+4
+Relay_THT
+Relay_SPST_PotterBrumfield_T9AP1D52_12V30A
+Relay SPST Potter&Brumfield T9AP1D52 12V 30A 1xEin Connector Fast ON Only Dummy for Space NO Pads
+Relau SPST Potter&Brumfield T9AP1D52 12V 30A 1xEin Connector Fast ON Flachsteckeranschluss Only Dummy for Space NO Pads
+0
+0
+0
+Relay_THT
+Relay_SPST_RAYEX-L90A
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90A SPST NO
+0
+5
+5
+Relay_THT
+Relay_SPST_RAYEX-L90AS
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90AS SPST NO
+0
+4
+4
+Relay_THT
+Relay_SPST_RAYEX-L90B
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90B SPST NC
+0
+5
+5
+Relay_THT
+Relay_SPST_RAYEX-L90BS
+https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf
+Relay RAYEX L90BS SPST NC
+0
+4
+4
+Relay_THT
+Relay_SPST_SANYOU_SRD_Series_Form_A
+relay Sanyou SRD series Form A http://www.sanyourelay.ca/public/products/pdf/SRD.pdf
+relay Sanyu SRD form A
+0
+4
+4
+Relay_THT
+Relay_SPST_SANYOU_SRD_Series_Form_B
+relay Sanyou SRD series Form B opener http://www.sanyourelay.ca/public/products/pdf/SRD.pdf
+relay Sanyu SRD form B opener
+0
+4
+4
+Relay_THT
+Relay_SPST_Schrack-RP-II-1-16A-FormA_RM5mm
+Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Form A http://image.schrack.com/datenblaetter/h_rp810012-b.pdf
+Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Relay
+0
+6
+4
+Relay_THT
+Relay_SPST_Schrack-RP-II-1-FormA_RM3.5mm
+Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Form A
+Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Relay
+0
+4
+4
+Relay_THT
+Relay_SPST_Schrack-RP-II-1-FormA_RM5mm
+Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Form A http://image.schrack.com/datenblaetter/h_rp810012-b.pdf
+Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Relay
+0
+4
+4
+Relay_THT
+Relay_SPST_Schrack-RP3SL-1coil_RM5mm
+Relay SPST Schrack-RP3SL, 1-coil-version, RM5mm 16A 250V AC Form A http://www.alliedelec.com/m/d/543c6bed18bf23a83ae5238947033ee0.pdf
+Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Relay
+0
+6
+4
+Relay_THT
+Relay_SPST_Schrack-RP3SL_RM5mm
+Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Form A http://www.alliedelec.com/m/d/543c6bed18bf23a83ae5238947033ee0.pdf
+Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Relay
+0
+7
+5
+Relay_THT
+Relay_SPST_Schrack-RT1-16A-FormA_RM5mm
+Relay SPST Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN
+Relay SPST Schrack-RT2 RM5mm 16A 250V AC Relay
+0
+6
+4
+Relay_THT
+Relay_SPST_Schrack-RT1-FormA_RM3.5mm
+Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Form A
+Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Relay
+0
+4
+4
+Relay_THT
+Relay_SPST_Schrack-RT1-FormA_RM5mm
+Relay SPST Schrack-RT1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf
+Relay SPST Schrack-RT1 RM5mm 8A 250V AC Relay
+0
+4
+4
+Relay_THT
+Relay_SPST_StandexMeder_MS_Form1AB
+Standex-Meder MS SIL-relais, Form 1A/1B, see https://standexelectronics.com/de/produkte/ms-reed-relais/
+Standex Meder MS SIL reed relais
+0
+4
+4
+Relay_THT
+Relay_SPST_StandexMeder_SIL_Form1A
+Standex-Meder SIL-relais, Form 1A, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf
+Standex Meder SIL reed relais
+0
+4
+4
+Relay_THT
+Relay_SPST_StandexMeder_SIL_Form1B
+Standex-Meder SIL-relais, Form 1B, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf
+Standex Meder SIL reed relais
+0
+4
+4
+Relay_THT
+Relay_SPST_TE_PCH-1xxx2M
+Miniature PCB Relay, PCH Series, 1 Form A (NO), SPST http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FPCH_series_relay_data_sheet_E%7F1215%7Fpdf%7FEnglish%7FENG_DS_PCH_series_relay_data_sheet_E_1215.pdf
+Relay SPST NO
+0
+4
+4
+Relay_THT
+Relay_SPST_TE_PCN-1xxD3MHZ
+https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1461491%7FG2%7Fpdf%7FEnglish%7FENG_CD_1461491_G2.pdf%7F3-1461491-0
+SPST relay slim
+0
+4
+4
+Relay_THT
+Relay_SPST_Zettler-AZSR131
+American Zettler RELAY EV CHRG SOLAR SPST 35A 12V, https://zettlerelectronics.com/products/AZSR131.pdf
+SPST
+0
+4
+4
+Relay_THT
+Relay_Socket_3PDT_Omron_PLE11-0
+29mm Dia, round mounting socket, 10A, 2kV AC / minute, 1e3Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=27
+tube type relay
+0
+11
+11
+Relay_THT
+Relay_Socket_4PDT_Omron_PY14-02
+21.4x25.8mm, 4Pole mounting socket, 3A, 1.5kV AC / minute, 1e2Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=19
+relay socket
+0
+14
+14
+Relay_THT
+Relay_Socket_DPDT_Finder_96.12
+DPDT relay socket, 15A max 10A per contact, 2kV AC Isolation, https://gfinder.findernet.com/public/attachments/56/DE/S56DE.pdf
+finder relay socket 96.12 56.32
+0
+8
+8
+Relay_THT
+Relay_Socket_DPDT_Omron_PLE08-0
+29mm Dia, round mounting socket, 10A, 2kV AC / minute, 1e3Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=27
+tube type relay
+0
+8
+8
+Relay_THT
+Relay_StandexMeder_DIP_HighProfile
+package for Standex Meder DIP reed relay series, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_DIP.pdf
+DIL DIP PDIP 2.54mm 7.62mm 300mil reed relay
+0
+8
+8
+Relay_THT
+Relay_StandexMeder_DIP_LowProfile
+package for Standex Meder DIP reed relay series, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_DIP.pdf
+DIL DIP PDIP 2.54mm 7.62mm 300mil reed relay
+0
+8
+8
+Relay_THT
+Relay_StandexMeder_UMS
+Standex-Meder SIL-relais, UMS, see http://cdn-reichelt.de/documents/datenblatt/C300/UMS05_1A80_75L_DB.pdf
+Standex Meder SIL reed relais
+0
+4
+4
+Relay_THT
+Relay_Tyco_V23072_Sealed
+Tyco Electronics Mini Relay K (Sealed Version), length 16.9mm, width 14.7mm, height 19.2mm, drill hole 1.30mm ( https://www.electrokit.com/upload/product/41019/41019252/V23072.pdf )
+SPST SPDT DC TE0598-P2
+0
+7
+7
+Resistor_SMD
+R_0201_0603Metric
+Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+resistor
+0
+4
+2
+Resistor_SMD
+R_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+4
+2
+Resistor_SMD
+R_0402_1005Metric
+Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_0402_1005Metric_Pad0.72x0.64mm_HandSolder
+Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_0603_1608Metric
+Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_0603_1608Metric_Pad0.98x0.95mm_HandSolder
+Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_0612_1632Metric
+Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_0612_1632Metric_Pad1.18x3.40mm_HandSolder
+Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_0805_2012Metric
+Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_0805_2012Metric_Pad1.20x1.40mm_HandSolder
+Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_0815_2038Metric
+Resistor SMD 0815 (2038 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.susumu.co.jp/common/pdf/n_catalog_partition07_en.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_0815_2038Metric_Pad1.20x4.05mm_HandSolder
+Resistor SMD 0815 (2038 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.susumu.co.jp/common/pdf/n_catalog_partition07_en.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_01005_0402Metric
+Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+resistor
+0
+4
+2
+Resistor_SMD
+R_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+4
+2
+Resistor_SMD
+R_1020_2550Metric
+Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_1020_2550Metric_Pad1.33x5.20mm_HandSolder
+Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_1206_3216Metric
+Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_1206_3216Metric_Pad1.30x1.75mm_HandSolder
+Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_1210_3225Metric
+Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_1210_3225Metric_Pad1.30x2.65mm_HandSolder
+Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_1218_3246Metric
+Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20035/dcrcwe3.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_1218_3246Metric_Pad1.22x4.75mm_HandSolder
+Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20035/dcrcwe3.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_1812_4532Metric
+Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_1812_4532Metric_Pad1.30x3.40mm_HandSolder
+Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_2010_5025Metric
+Resistor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_2010_5025Metric_Pad1.40x2.65mm_HandSolder
+Resistor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_2512_6332Metric
+Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_2512_6332Metric_Pad1.40x3.35mm_HandSolder
+Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_2816_7142Metric
+Resistor SMD 2816 (7142 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: https://www.vishay.com/docs/30100/wsl.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_2816_7142Metric_Pad3.20x4.45mm_HandSolder
+Resistor SMD 2816 (7142 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: https://www.vishay.com/docs/30100/wsl.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_4020_10251Metric
+Resistor SMD 4020 (10251 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://datasheet.octopart.com/HVC0603T5004FET-Ohmite-datasheet-26699797.pdf), generated with kicad-footprint-generator
+resistor
+0
+2
+2
+Resistor_SMD
+R_4020_10251Metric_Pad1.65x5.30mm_HandSolder
+Resistor SMD 4020 (10251 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size source: http://datasheet.octopart.com/HVC0603T5004FET-Ohmite-datasheet-26699797.pdf), generated with kicad-footprint-generator
+resistor handsolder
+0
+2
+2
+Resistor_SMD
+R_Array_Concave_2x0603
+Thick Film Chip Resistor Array, Wave soldering, Vishay CRA06P (see cra06p.pdf)
+resistor array
+0
+4
+4
+Resistor_SMD
+R_Array_Concave_4x0402
+Thick Film Chip Resistor Array, Wave soldering, Vishay CRA04P (see cra04p.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Concave_4x0603
+Thick Film Chip Resistor Array, Wave soldering, Vishay CRA06P (see cra06p.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Convex_2x0402
+Chip Resistor Network, ROHM MNR02 (see mnr_g.pdf)
+resistor array
+0
+4
+4
+Resistor_SMD
+R_Array_Convex_2x0603
+Chip Resistor Network, ROHM MNR12 (see mnr_g.pdf)
+resistor array
+0
+4
+4
+Resistor_SMD
+R_Array_Convex_2x0606
+Precision Thin Film Chip Resistor Array, VISHAY (see http://www.vishay.com/docs/28770/acasat.pdf)
+resistor array
+0
+4
+4
+Resistor_SMD
+R_Array_Convex_2x1206
+Chip Resistor Network, ROHM MNR32 (see mnr_g.pdf)
+resistor array
+0
+4
+4
+Resistor_SMD
+R_Array_Convex_4x0402
+Chip Resistor Network, ROHM MNR04 (see mnr_g.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Convex_4x0603
+Chip Resistor Network, ROHM MNR14 (see mnr_g.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Convex_4x0612
+Precision Thin Film Chip Resistor Array, VISHAY (see http://www.vishay.com/docs/28770/acasat.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Convex_4x1206
+Chip Resistor Network, ROHM MNR34 (see mnr_g.pdf)
+resistor array
+0
+8
+8
+Resistor_SMD
+R_Array_Convex_5x0603
+Chip Resistor Network, ROHM MNR15 (see mnr_g.pdf)
+resistor array
+0
+10
+10
+Resistor_SMD
+R_Array_Convex_5x1206
+Chip Resistor Network, ROHM MNR35 (see mnr_g.pdf)
+resistor array
+0
+10
+10
+Resistor_SMD
+R_Array_Convex_8x0602
+Chip Resistor Network, ROHM MNR18 (see mnr_g.pdf)
+resistor array
+0
+16
+16
+Resistor_SMD
+R_Cat16-2
+SMT resistor net, Bourns CAT16 series, 2 way
+SMT resistor net Bourns CAT16 series 2 way
+0
+4
+4
+Resistor_SMD
+R_Cat16-4
+SMT resistor net, Bourns CAT16 series, 4 way
+SMT resistor net Bourns CAT16 series 4 way
+0
+8
+8
+Resistor_SMD
+R_Cat16-8
+SMT resistor net, Bourns CAT16 series, 8 way
+SMT resistor net Bourns CAT16 series 8 way
+0
+16
+16
+Resistor_SMD
+R_MELF_MMB-0207
+Resistor, MELF, MMB-0207, http://www.vishay.com/docs/28713/melfprof.pdf
+MELF Resistor
+0
+2
+2
+Resistor_SMD
+R_MicroMELF_MMU-0102
+Resistor, MicroMELF, MMU-0102, http://www.vishay.com/docs/28713/melfprof.pdf
+MicroMELF Resistor
+0
+2
+2
+Resistor_SMD
+R_MiniMELF_MMA-0204
+Resistor, MiniMELF, MMA-0204, http://www.vishay.com/docs/28713/melfprof.pdf
+MiniMELF Resistor
+0
+2
+2
+Resistor_SMD
+R_Shunt_Isabellenhuette_BVR4026
+4-Wire Shunt, SMD 4026, https://www.isabellenhuette.de/fileadmin/Daten/Praezisionswiderstaende/Datenblaetter/BVR.PDF
+kelvin-connection
+0
+4
+4
+Resistor_SMD
+R_Shunt_Ohmite_LVK12
+4 contact shunt resistor
+shunt resistor 4 contacts
+0
+4
+4
+Resistor_SMD
+R_Shunt_Ohmite_LVK20
+4 contacts shunt resistor, https://www.ohmite.com/assets/docs/res_lvk.pdf
+4 contacts resistor smd
+0
+4
+4
+Resistor_SMD
+R_Shunt_Ohmite_LVK24
+4 contacts shunt resistor,https://www.ohmite.com/assets/docs/res_lvk.pdf
+4 contacts resistor smd
+0
+4
+4
+Resistor_SMD
+R_Shunt_Ohmite_LVK25
+4 contacts shunt resistor,https://www.ohmite.com/assets/docs/res_lvk.pdf
+4 contacts resistor smd
+0
+4
+4
+Resistor_SMD
+R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm
+Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 1.19mm, 5 to 200 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf)
+resistor shunt WSK2512
+0
+4
+4
+Resistor_SMD
+R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm
+Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.21mm, 1 to 4.9 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf)
+resistor shunt WSK2512
+0
+4
+4
+Resistor_SMD
+R_Shunt_Vishay_WSK2512_6332Metric_T2.66mm
+Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.66mm, 0.5 to 0.99 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf)
+resistor shunt WSK2512
+0
+4
+4
+Resistor_SMD
+R_Shunt_Vishay_WSKW0612
+https://www.vishay.com/docs/30332/wskw0612.pdf
+4-Terminal SMD Shunt
+0
+4
+4
+Resistor_SMD
+R_Shunt_Vishay_WSR2_WSR3
+Power Metal Strip Resistors 0.005 to 0.2, https://www.vishay.com/docs/30101/wsr.pdf
+SMD Shunt Resistor
+0
+2
+2
+Resistor_SMD
+R_Shunt_Vishay_WSR2_WSR3_KelvinConnection
+Power Metal Strip Resistors 0.005 to 0.2, https://www.vishay.com/docs/30101/wsr.pdf
+SMD Shunt Resistor
+0
+4
+2
+Resistor_THT
+R_Array_SIP4
+4-pin Resistor SIP pack
+R
+0
+4
+4
+Resistor_THT
+R_Array_SIP5
+5-pin Resistor SIP pack
+R
+0
+5
+5
+Resistor_THT
+R_Array_SIP6
+6-pin Resistor SIP pack
+R
+0
+6
+6
+Resistor_THT
+R_Array_SIP7
+7-pin Resistor SIP pack
+R
+0
+7
+7
+Resistor_THT
+R_Array_SIP8
+8-pin Resistor SIP pack
+R
+0
+8
+8
+Resistor_THT
+R_Array_SIP9
+9-pin Resistor SIP pack
+R
+0
+9
+9
+Resistor_THT
+R_Array_SIP10
+10-pin Resistor SIP pack
+R
+0
+10
+10
+Resistor_THT
+R_Array_SIP11
+11-pin Resistor SIP pack
+R
+0
+11
+11
+Resistor_THT
+R_Array_SIP12
+12-pin Resistor SIP pack
+R
+0
+12
+12
+Resistor_THT
+R_Array_SIP13
+13-pin Resistor SIP pack
+R
+0
+13
+13
+Resistor_THT
+R_Array_SIP14
+14-pin Resistor SIP pack
+R
+0
+14
+14
+Resistor_THT
+R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical
+Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=1.9mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0204 series Axial Vertical pin pitch 1.9mm 0.167W length 3.6mm diameter 1.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical
+Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal
+Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=5.08mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0204 series Axial Horizontal pin pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical
+Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=5.08mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0204 series Axial Vertical pin pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal
+Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=7.62mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0204 series Axial Horizontal pin pitch 7.62mm 0.167W length 3.6mm diameter 1.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical
+Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=2.54mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0207 series Axial Vertical pin pitch 2.54mm 0.25W = 1/4W length 6.3mm diameter 2.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical
+Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=5.08mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0207 series Axial Vertical pin pitch 5.08mm 0.25W = 1/4W length 6.3mm diameter 2.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
+Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=7.62mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0207 series Axial Horizontal pin pitch 7.62mm 0.25W = 1/4W length 6.3mm diameter 2.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
+Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=10.16mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0207 series Axial Horizontal pin pitch 10.16mm 0.25W = 1/4W length 6.3mm diameter 2.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal
+Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=15.24mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0207 series Axial Horizontal pin pitch 15.24mm 0.25W = 1/4W length 6.3mm diameter 2.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical
+Resistor, Axial_DIN0309 series, Axial, Vertical, pin pitch=2.54mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Vertical pin pitch 2.54mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical
+Resistor, Axial_DIN0309 series, Axial, Vertical, pin pitch=5.08mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Vertical pin pitch 5.08mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal
+Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=12.7mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Horizontal pin pitch 12.7mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal
+Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=15.24mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Horizontal pin pitch 15.24mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=20.32mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Horizontal pin pitch 20.32mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0309_L9.0mm_D3.2mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=25.4mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0309 series Axial Horizontal pin pitch 25.4mm 0.5W = 1/2W length 9mm diameter 3.2mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_Vertical
+Resistor, Axial_DIN0411 series, Axial, Vertical, pin pitch=5.08mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Vertical pin pitch 5.08mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical
+Resistor, Axial_DIN0411 series, Axial, Vertical, pin pitch=7.62mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Vertical pin pitch 7.62mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal
+Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal
+Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=15.24mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Horizontal pin pitch 15.24mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=20.32mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Horizontal pin pitch 20.32mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0411_L9.9mm_D3.6mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=25.4mm, 1W, length*diameter=9.9*3.6mm^2
+Resistor Axial_DIN0411 series Axial Horizontal pin pitch 25.4mm 1W length 9.9mm diameter 3.6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_Vertical
+Resistor, Axial_DIN0414 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0414 series Axial Vertical pin pitch 5.08mm 2W length 11.9mm diameter 4.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0414_L11.9mm_D4.5mm_P7.62mm_Vertical
+Resistor, Axial_DIN0414 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0414 series Axial Vertical pin pitch 7.62mm 2W length 11.9mm diameter 4.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal
+Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=15.24mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0414 series Axial Horizontal pin pitch 15.24mm 2W length 11.9mm diameter 4.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0414 series Axial Horizontal pin pitch 20.32mm 2W length 11.9mm diameter 4.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0414_L11.9mm_D4.5mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0414 series Axial Horizontal pin pitch 25.4mm 2W length 11.9mm diameter 4.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical
+Resistor, Axial_DIN0516 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0516 series Axial Vertical pin pitch 5.08mm 2W length 15.5mm diameter 5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0516_L15.5mm_D5.0mm_P7.62mm_Vertical
+Resistor, Axial_DIN0516 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0516 series Axial Vertical pin pitch 7.62mm 2W length 15.5mm diameter 5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0516 series Axial Horizontal pin pitch 20.32mm 2W length 15.5mm diameter 5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0516 series Axial Horizontal pin pitch 25.4mm 2W length 15.5mm diameter 5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0516_L15.5mm_D5.0mm_P30.48mm_Horizontal
+Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=30.48mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf
+Resistor Axial_DIN0516 series Axial Horizontal pin pitch 30.48mm 2W length 15.5mm diameter 5mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0614_L14.3mm_D5.7mm_P5.08mm_Vertical
+Resistor, Axial_DIN0614 series, Axial, Vertical, pin pitch=5.08mm, 1.5W, length*diameter=14.3*5.7mm^2
+Resistor Axial_DIN0614 series Axial Vertical pin pitch 5.08mm 1.5W length 14.3mm diameter 5.7mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0614_L14.3mm_D5.7mm_P7.62mm_Vertical
+Resistor, Axial_DIN0614 series, Axial, Vertical, pin pitch=7.62mm, 1.5W, length*diameter=14.3*5.7mm^2
+Resistor Axial_DIN0614 series Axial Vertical pin pitch 7.62mm 1.5W length 14.3mm diameter 5.7mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0614_L14.3mm_D5.7mm_P15.24mm_Horizontal
+Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=15.24mm, 1.5W, length*diameter=14.3*5.7mm^2
+Resistor Axial_DIN0614 series Axial Horizontal pin pitch 15.24mm 1.5W length 14.3mm diameter 5.7mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0614_L14.3mm_D5.7mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=20.32mm, 1.5W, length*diameter=14.3*5.7mm^2
+Resistor Axial_DIN0614 series Axial Horizontal pin pitch 20.32mm 1.5W length 14.3mm diameter 5.7mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=25.4mm, 1.5W, length*diameter=14.3*5.7mm^2
+Resistor Axial_DIN0614 series Axial Horizontal pin pitch 25.4mm 1.5W length 14.3mm diameter 5.7mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0617_L17.0mm_D6.0mm_P5.08mm_Vertical
+Resistor, Axial_DIN0617 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0617 series Axial Vertical pin pitch 5.08mm 2W length 17mm diameter 6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0617_L17.0mm_D6.0mm_P7.62mm_Vertical
+Resistor, Axial_DIN0617 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0617 series Axial Vertical pin pitch 7.62mm 2W length 17mm diameter 6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal
+Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0617 series Axial Horizontal pin pitch 20.32mm 2W length 17mm diameter 6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0617_L17.0mm_D6.0mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0617 series Axial Horizontal pin pitch 25.4mm 2W length 17mm diameter 6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal
+Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=30.48mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0617 series Axial Horizontal pin pitch 30.48mm 2W length 17mm diameter 6mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0918_L18.0mm_D9.0mm_P7.62mm_Vertical
+Resistor, Axial_DIN0918 series, Axial, Vertical, pin pitch=7.62mm, 4W, length*diameter=18*9mm^2
+Resistor Axial_DIN0918 series Axial Vertical pin pitch 7.62mm 4W length 18mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0918_L18.0mm_D9.0mm_P22.86mm_Horizontal
+Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=22.86mm, 4W, length*diameter=18*9mm^2
+Resistor Axial_DIN0918 series Axial Horizontal pin pitch 22.86mm 4W length 18mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0918_L18.0mm_D9.0mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=25.4mm, 4W, length*diameter=18*9mm^2
+Resistor Axial_DIN0918 series Axial Horizontal pin pitch 25.4mm 4W length 18mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0918_L18.0mm_D9.0mm_P30.48mm_Horizontal
+Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=30.48mm, 4W, length*diameter=18*9mm^2
+Resistor Axial_DIN0918 series Axial Horizontal pin pitch 30.48mm 4W length 18mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0922_L20.0mm_D9.0mm_P7.62mm_Vertical
+Resistor, Axial_DIN0922 series, Axial, Vertical, pin pitch=7.62mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0922 series Axial Vertical pin pitch 7.62mm 5W length 20mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0922_L20.0mm_D9.0mm_P25.40mm_Horizontal
+Resistor, Axial_DIN0922 series, Axial, Horizontal, pin pitch=25.4mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0922 series Axial Horizontal pin pitch 25.4mm 5W length 20mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_DIN0922_L20.0mm_D9.0mm_P30.48mm_Horizontal
+Resistor, Axial_DIN0922 series, Axial, Horizontal, pin pitch=30.48mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf
+Resistor Axial_DIN0922 series Axial Horizontal pin pitch 30.48mm 5W length 20mm diameter 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L20.0mm_W6.4mm_P5.08mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=5.08mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 5.08mm 4W length 20mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L20.0mm_W6.4mm_P7.62mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 4W length 20mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L20.0mm_W6.4mm_P22.40mm
+Resistor, Axial_Power series, Box, pin pitch=22.4mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 22.4mm 4W length 20mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L20.0mm_W6.4mm_P25.40mm
+Resistor, Axial_Power series, Box, pin pitch=25.4mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 25.4mm 4W length 20mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L20.0mm_W6.4mm_P30.48mm
+Resistor, Axial_Power series, Box, pin pitch=30.48mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 30.48mm 4W length 20mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W6.4mm_P27.94mm
+Resistor, Axial_Power series, Box, pin pitch=27.94mm, 5W, length*width*height=25*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 27.94mm 5W length 25mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W6.4mm_P30.48mm
+Resistor, Axial_Power series, Box, pin pitch=30.48mm, 5W, length*width*height=25*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 30.48mm 5W length 25mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W9.0mm_P7.62mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 7W length 25mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W9.0mm_P10.16mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 7W length 25mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W9.0mm_P27.94mm
+Resistor, Axial_Power series, Box, pin pitch=27.94mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 27.94mm 7W length 25mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L25.0mm_W9.0mm_P30.48mm
+Resistor, Axial_Power series, Box, pin pitch=30.48mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 30.48mm 7W length 25mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L38.0mm_W6.4mm_P40.64mm
+Resistor, Axial_Power series, Box, pin pitch=40.64mm, 7W, length*width*height=38*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 40.64mm 7W length 38mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L38.0mm_W6.4mm_P45.72mm
+Resistor, Axial_Power series, Box, pin pitch=45.72mm, 7W, length*width*height=38*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 45.72mm 7W length 38mm width 6.4mm height 6.4mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L38.0mm_W9.0mm_P40.64mm
+Resistor, Axial_Power series, Box, pin pitch=40.64mm, 9W, length*width*height=38*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 40.64mm 9W length 38mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L38.0mm_W9.0mm_P45.72mm
+Resistor, Axial_Power series, Box, pin pitch=45.72mm, 9W, length*width*height=38*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 45.72mm 9W length 38mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L48.0mm_W12.5mm_P7.62mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 15W length 48mm width 12.5mm height 12.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L48.0mm_W12.5mm_P10.16mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 15W length 48mm width 12.5mm height 12.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L48.0mm_W12.5mm_P55.88mm
+Resistor, Axial_Power series, Box, pin pitch=55.88mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 55.88mm 15W length 48mm width 12.5mm height 12.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L48.0mm_W12.5mm_P60.96mm
+Resistor, Axial_Power series, Box, pin pitch=60.96mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 60.96mm 15W length 48mm width 12.5mm height 12.5mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L50.0mm_W9.0mm_P55.88mm
+Resistor, Axial_Power series, Box, pin pitch=55.88mm, 11W, length*width*height=50*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 55.88mm 11W length 50mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L50.0mm_W9.0mm_P60.96mm
+Resistor, Axial_Power series, Box, pin pitch=60.96mm, 11W, length*width*height=50*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 60.96mm 11W length 50mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L60.0mm_W14.0mm_P10.16mm_Vertical
+Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 25W length 60mm width 14mm height 14mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L60.0mm_W14.0mm_P66.04mm
+Resistor, Axial_Power series, Box, pin pitch=66.04mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 66.04mm 25W length 60mm width 14mm height 14mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L60.0mm_W14.0mm_P71.12mm
+Resistor, Axial_Power series, Box, pin pitch=71.12mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 71.12mm 25W length 60mm width 14mm height 14mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L75.0mm_W9.0mm_P81.28mm
+Resistor, Axial_Power series, Box, pin pitch=81.28mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 81.28mm 17W length 75mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Power_L75.0mm_W9.0mm_P86.36mm
+Resistor, Axial_Power series, Box, pin pitch=86.36mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf
+Resistor Axial_Power series Box pin pitch 86.36mm 17W length 75mm width 9mm height 9mm
+0
+2
+2
+Resistor_THT
+R_Axial_Shunt_L22.2mm_W8.0mm_PS14.30mm_P25.40mm
+Resistor, Axial_Shunt series, Box, pin pitch=25.4mm, 3W, length*width*height=22.2*8*8mm^3, shunt pin pitch = 14.30mm, http://www.vishay.com/docs/30217/cpsl.pdf
+Resistor Axial_Shunt series Box pin pitch 25.4mm 3W length 22.2mm width 8mm height 8mm shunt pin pitch 14.30mm
+0
+4
+4
+Resistor_THT
+R_Axial_Shunt_L22.2mm_W9.5mm_PS14.30mm_P25.40mm
+Resistor, Axial_Shunt series, Box, pin pitch=25.4mm, 5W, length*width*height=22.2*9.5*9.5mm^3, shunt pin pitch = 14.30mm, http://www.vishay.com/docs/30217/cpsl.pdf
+Resistor Axial_Shunt series Box pin pitch 25.4mm 5W length 22.2mm width 9.5mm height 9.5mm shunt pin pitch 14.30mm
+0
+4
+4
+Resistor_THT
+R_Axial_Shunt_L35.3mm_W9.5mm_PS25.40mm_P38.10mm
+Resistor, Axial_Shunt series, Box, pin pitch=38.1mm, 7W, length*width*height=35.3*9.5*9.5mm^3, shunt pin pitch = 25.40mm, http://www.vishay.com/docs/30217/cpsl.pdf
+Resistor Axial_Shunt series Box pin pitch 38.1mm 7W length 35.3mm width 9.5mm height 9.5mm shunt pin pitch 25.40mm
+0
+4
+4
+Resistor_THT
+R_Axial_Shunt_L47.6mm_W9.5mm_PS34.93mm_P50.80mm
+Resistor, Axial_Shunt series, Box, pin pitch=50.8mm, 10W, length*width*height=47.6*9.5*9.5mm^3, shunt pin pitch = 34.93mm, http://www.vishay.com/docs/30217/cpsl.pdf
+Resistor Axial_Shunt series Box pin pitch 50.8mm 10W length 47.6mm width 9.5mm height 9.5mm shunt pin pitch 34.93mm
+0
+4
+4
+Resistor_THT
+R_Axial_Shunt_L47.6mm_W12.7mm_PS34.93mm_P50.80mm
+Resistor, Axial_Shunt series, Box, pin pitch=50.8mm, 15W, length*width*height=47.6*12.7*12.7mm^3, shunt pin pitch = 34.93mm, http://www.vishay.com/docs/30217/cpsl.pdf
+Resistor Axial_Shunt series Box pin pitch 50.8mm 15W length 47.6mm width 12.7mm height 12.7mm shunt pin pitch 34.93mm
+0
+4
+4
+Resistor_THT
+R_Bare_Metal_Element_L12.4mm_W4.8mm_P11.40mm
+Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=11.4mm, 1W, length*width=12.4*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf
+Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 11.4mm 1W length 12.4mm width 4.8mm 
+0
+2
+2
+Resistor_THT
+R_Bare_Metal_Element_L16.3mm_W4.8mm_P15.30mm
+Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=15.3mm, 3W, length*width=16.3*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf
+Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 15.3mm 3W length 16.3mm width 4.8mm 
+0
+2
+2
+Resistor_THT
+R_Bare_Metal_Element_L21.3mm_W4.8mm_P20.30mm
+Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=20.3mm, 5W, length*width=21.3*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf
+Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 20.3mm 5W length 21.3mm width 4.8mm 
+0
+2
+2
+Resistor_THT
+R_Box_L8.4mm_W2.5mm_P5.08mm
+Resistor, Box series, Radial, pin pitch=5.08mm, 0.5W = 1/2W, length*width=8.38*2.54mm^2, http://www.vishay.com/docs/60051/cns020.pdf
+Resistor Box series Radial pin pitch 5.08mm 0.5W = 1/2W length 8.38mm width 2.54mm
+0
+2
+2
+Resistor_THT
+R_Box_L13.0mm_W4.0mm_P9.00mm
+Resistor, Box series, Radial, pin pitch=9.00mm, 2W, length*width=13.0*4.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf
+Resistor Box series Radial pin pitch 9.00mm 2W length 13.0mm width 4.0mm
+0
+2
+2
+Resistor_THT
+R_Box_L14.0mm_W5.0mm_P9.00mm
+Resistor, Box series, Radial, pin pitch=9.00mm, 5W, length*width=14.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf
+Resistor Box series Radial pin pitch 9.00mm 5W length 14.0mm width 5.0mm
+0
+2
+2
+Resistor_THT
+R_Box_L26.0mm_W5.0mm_P20.00mm
+Resistor, Box series, Radial, pin pitch=20.00mm, 10W, length*width=26.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf
+Resistor Box series Radial pin pitch 20.00mm 10W length 26.0mm width 5.0mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L7.0mm_W8.0mm_Px2.40mm_Py2.30mm
+Resistor, Radial_Power series, Radial, pin pitch=2.40*2.30mm^2, 7W, length*width=7*8mm^2, http://www.vitrohm.com/content/files/vitrohm_series_kv_-_201601.pdf
+Resistor Radial_Power series Radial pin pitch 2.40*2.30mm^2 7W length 7mm width 8mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L9.0mm_W10.0mm_Px2.70mm_Py2.30mm
+Resistor, Radial_Power series, Radial, pin pitch=2.70*2.30mm^2, 17W, length*width=9*10mm^2, http://www.vitrohm.com/content/files/vitrohm_series_kv_-_201601.pdf
+Resistor Radial_Power series Radial pin pitch 2.70*2.30mm^2 17W length 9mm width 10mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L11.0mm_W7.0mm_P5.00mm
+Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 2W, length*width=11.0*7.0mm^2, https://www.vishay.com/docs/30218/cpcp-cpcf.pdf
+Resistor Radial_Power series Radial pin pitch 5.00mm 2W length 11.0mm width 7.0mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L12.0mm_W8.0mm_P5.00mm
+Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 3W, length*width=12.0*8.0mm^2, https://www.vishay.com/docs/30218/cpcp-cpcf.pdf
+Resistor Radial_Power series Radial pin pitch 5.00mm 3W length 12.0mm width 8.0mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L13.0mm_W9.0mm_P5.00mm
+Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 7W, length*width=13.0*9.0mm^2, https://www.vishay.com/docs/30218/cpcp-cpcf.pdf
+Resistor Radial_Power series Radial pin pitch 5.00mm 7W length 13.0mm width 9.0mm
+0
+2
+2
+Resistor_THT
+R_Radial_Power_L16.1mm_W9.0mm_P7.37mm
+Resistor, Radial_Power series, Radial, pin pitch=7.37mm, 10W, length*width=16.1*9mm^2, https://www.vishay.com/docs/30218/cpcp-cpcf.pdf
+Resistor Radial_Power series Radial pin pitch 7.37mm 10W length 16.1mm width 9mm
+0
+2
+2
+Rotary_Encoder
+RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm
+Alps rotary encoder, EC11E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles
+Alps rotary encoder, EC11E... with switch, vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles
+Alps rotary encoder, EC11E... with switch, vertical shaft, https://www.lcsc.com/datasheet/lcsc_datasheet_2410010003_ALPSALPINE-EC11E09444A8_C1322538.pdf
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Alps_EC11E_Vertical_H20mm
+Alps rotary encoder, EC11E... without switch (pins are dummy), vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html
+rotary encoder
+0
+7
+4
+Rotary_Encoder
+RotaryEncoder_Alps_EC11E_Vertical_H20mm_CircularMountingHoles
+Alps rotary encoder, EC11E... without switch (pins are dummy), vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html
+rotary encoder
+0
+7
+4
+Rotary_Encoder
+RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm
+Alps rotary encoder, EC12E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html & http://cdn-reichelt.de/documents/datenblatt/F100/402097STEC12E08.PDF
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm_CircularMountingHoles
+Alps rotary encoder, EC12E... with switch, vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html & http://cdn-reichelt.de/documents/datenblatt/F100/402097STEC12E08.PDF
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Alps_EC12E_Vertical_H20mm
+Alps rotary encoder, EC12E..., vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html
+rotary encoder
+0
+5
+4
+Rotary_Encoder
+RotaryEncoder_Alps_EC12E_Vertical_H20mm_CircularMountingHoles
+Alps rotary encoder, EC12E..., vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html
+rotary encoder
+0
+5
+4
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Nxxxx
+Bourns rotary encoder, PEC09, without switch, horizontal shaft, https://www.bourns.com/products/encoders/contacting-encoders/product/PEC09
+rotary encoder
+0
+3
+3
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Sxxxx
+Bourns rotary encoder, PEC09, with switch, horizontal shaft, https://www.bourns.com/products/encoders/contacting-encoders/product/PEC09
+rotary encoder
+0
+5
+5
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Nxxxx
+Bourns rotary encoder, PEC12R, without switch, horizontal shaft, 17mm shaft length, https://www.bourns.com/docs/product-datasheets/pec12r.pdf
+rotary encoder
+0
+5
+4
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Sxxxx
+Bourns rotary encoder, PEC12R, with switch, horizontal shaft, 17mm shaft length, https://www.bourns.com/docs/product-datasheets/pec12r.pdf
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x16F-Sxxxx
+Rotary encoder with switch and illuminated 4mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x18F-Sxxxx
+Rotary encoder with switch and illuminated 6mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x21F-Sxxxx
+Rotary encoder with switch and illuminated 8mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x25S-Sxxxx
+Rotary encoder with switch and illuminated shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x26F-Sxxxx
+Rotary encoder with switch and illuminated 13mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Horizontal_PEL12D-2x31F-Sxxxx
+Rotary encoder with switch and illuminated 18mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch horizontal
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx
+Bourns rotary encoder, PEC12R, without switch, with bushing, vertical shaft, 17.5mm shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf
+rotary encoder
+0
+5
+4
+Rotary_Encoder
+RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx
+Bourns rotary encoder, PEC12R, with switch, with bushing, vertical shaft, 17.5mm shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf
+rotary encoder
+0
+7
+6
+Rotary_Encoder
+RotaryEncoder_Bourns_Vertical_PEL12D-4x25S-Sxxxx
+Rotary encoder with switch and illuminated 13mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch vertical
+0
+9
+8
+Rotary_Encoder
+RotaryEncoder_Bourns_Vertical_PEL12D-4xxxF-Sxxxx
+Rotary encoder with switch and illuminated 4,6,8,13,18mm shaft, dual-led, https://www.bourns.com/docs/product-datasheets/PEL12D.pdf
+rotary encoder illuminated switch vertical
+0
+9
+8
+Sensor
+ASAIR_AM2302_P2.54mm_Lead2.75mm_TabDown
+Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/AM2302.pdf
+Temperature and humidity module DHT22 AM2302
+0
+4
+4
+Sensor
+ASAIR_AM2302_P2.54mm_Vertical
+Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/AM2302.pdf
+Temperature and humidity module DHT22 AM2302
+0
+4
+4
+Sensor
+Aosong_DHT11_5.5x12.0_P2.54mm
+Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/DHT11.pdf
+Temperature and humidity module
+0
+4
+4
+Sensor
+Avago_APDS-9960
+Digital Proximity, Ambient Light, RGB and Gesture Sensor (https://docs.broadcom.com/doc/AV02-4191EN)
+DFN Sensor optical IR
+0
+8
+8
+Sensor
+LuminOX_LOX-O2
+SST LuminOX Luminescence-based O2 sensor, https://sstsensing.com/wp-content/uploads/2021/08/DS0030rev15_LuminOx.pdf
+SST LuminOX O2
+0
+4
+4
+Sensor
+MQ-6
+Gas Sensor, 6 pin, https://www.winsen-sensor.com/d/files/semiconductor/mq-6.pdf
+gas sensor
+0
+6
+6
+Sensor
+Rohm_RPR-0521RS
+Digital Proximity and Ambient Light Sensor, 2.36 x 3.94 x 1.35mm, LGA-8 (https://fscdn.rohm.com/en/products/databook/datasheet/opto/optical_sensor/opto_module/rpr-0521rs-e.pdf)
+DFN Sensor optical IR
+0
+8
+8
+Sensor
+SHT1x
+SHT1x
+SHT1x
+0
+8
+8
+Sensor
+SPEC_110-xxx_SMD-10Pin_20x20mm_P4.0mm
+SPEC Sensors SMD package, 20x20mm, https://www.spec-sensors.com/wp-content/uploads/2016/10/3SP_H2S_50-C-Package-110-304.pdf
+SPEC Sensors gas sensor
+0
+10
+10
+Sensor
+Senseair_S8_Down
+Sensair S8 Series CO2 sensor, 1kHz PWM output, Modbus, THT
+co2 gas sensor pwm modbus
+0
+9
+9
+Sensor
+Senseair_S8_Up
+Sensair S8 Series CO2 sensor, 1kHz PWM output, Modbus, THT
+co2 gas sensor pwm modbus
+0
+9
+9
+Sensor
+Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm
+Sensirion SCD4x QFN, 20 Pin (https://sensirion.com/media/documents/C4B87CE6/627C2DCD/CD_DS_SCD40_SCD41_Datasheet_D1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Sensirion QFN NoLead
+0
+25
+21
+Sensor
+Sensortech_MiCS_5x7mm_P1.25mm
+https://www.sgxsensortech.com/content/uploads/2014/07/1084_Datasheet-MiCS-5524-rev-8.pdf
+Sensortech MiCS MEMS sensor
+0
+10
+10
+Sensor
+TGS-5141
+Fixaro carbon monoxide electrochemical sensor, https://figarosensor.com/product/docs/tgs5141-p00_product%20infomation%28fusa%29_rev07.pdf
+Figaro CO sensor
+0
+3
+2
+Sensor
+Winson_GM-402B_5x5mm_P1.27mm
+Winson GM-402B QFN, 8 Pin (https://www.winsen-sensor.com/d/files/me2/mems--gm-402b--manual-v1_1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py
+Winson QFN NoLead
+0
+8
+8
+Sensor_Audio
+CUI_CMC-4013-SMT
+Omnidirectional, -42dB, reflowable, electret condenser microphone https://www.cuidevices.com/product/resource/cmc-4013-smt-tr.pdf
+Microphone CUI 
+0
+2
+2
+Sensor_Audio
+Infineon_PG-LLGA-5-1
+Infineon_PG-LLGA-5-1 StepUp generated footprint, https://www.infineon.com/cms/en/product/packages/PG-LLGA/PG-LLGA-5-1/
+infineon mems microphone
+0
+15
+5
+Sensor_Audio
+Infineon_PG-LLGA-5-2
+Infineon, IP57, XENSIV, LGA-5, https://www.infineon.com/dgdl/Infineon-IM73A135-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017fadec36b84500
+MEMS Microphone LGA Dust Water
+0
+5
+5
+Sensor_Audio
+InvenSense_ICS-43434-6_3.5x2.65mm
+TDK InvenSense MEMS I2S Microphone: https://invensense.tdk.com/products/ics-43434/
+microphone MEMS I2S ICS-43434 TDK InvenSense
+0
+6
+6
+Sensor_Audio
+Knowles_LGA-5_3.5x2.65mm
+https://www.knowles.com/docs/default-source/model-downloads/sph0641lu4h-1-revb.pdf
+MEMS Microphone LGA
+0
+5
+5
+Sensor_Audio
+Knowles_LGA-6_4.72x3.76mm
+Knowles MEMS Analog Microphone, Omnidirectional, SMD, Differential/Single-Ended Output, -40dB, Bottom Port, https://www.knowles.com/docs/default-source/default-document-library/spm0687lr5h-1_winfrey_datasheet.pdf
+SPM0687LR5H MEMS Microphone LGA
+0
+6
+6
+Sensor_Audio
+Knowles_SPH0645LM4H-6_3.5x2.65mm
+Knowles MEMS I2S Microphone: https://www.knowles.com/subdepartment/dpt-microphones/subdpt-sisonic-surface-mount-mems
+microphone MEMS I2S SPH0645LM4H Knowles
+0
+6
+6
+Sensor_Audio
+POM-2244P-C3310-2-R
+Electret Condenser microphone, Project Unlimited (PU) Audio, https://api.puiaudio.com/file/b7e03aec-9603-48da-8064-9a0e0468047c.pdf
+microphone electret
+0
+2
+2
+Sensor_Audio
+ST_HLGA-6_3.76x4.72mm_P1.65mm
+http://www.st.com/content/ccc/resource/technical/document/datasheet/group3/27/62/48/98/44/54/4d/36/DM00303211/files/DM00303211.pdf/jcr:content/translations/en.DM00303211.pdf
+HLGA Sensor Audio
+0
+6
+6
+Sensor_Current
+AKM_CQ_7
+AKM Current Sensor, 7 pin, THT (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf)
+akm current sensor tht
+0
+39
+7
+Sensor_Current
+AKM_CQ_7S
+AKM Current Sensor, 7 pin, SMD (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf)
+akm current sensor smd
+0
+19
+7
+Sensor_Current
+AKM_CQ_VSOP-24_5.6x7.9mm_P0.65mm
+AKM VSOP-24 current sensor, 5.6x7.9mm body, 0.65mm pitch (http://www.akm.com/akm/en/file/datasheet/CQ-330J.pdf)
+akm vsop 24
+0
+10
+10
+Sensor_Current
+AKM_CZ_SSOP-10_6.5x8.1mm_P0.95mm
+AKM CZ-381x current sensor, 6.5x8.1mm body, 0.95mm pitch (http://www.akm.com/akm/en/product/detail/0009/)
+akm cz-381x 10
+0
+10
+10
+Sensor_Current
+Allegro_CB_PFF
+Allegro MicroSystems, CB-PFF Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx) !PADS 4-5 DO NOT MATCH DATASHEET!
+Allegro CB-PFF
+0
+37
+5
+Sensor_Current
+Allegro_CB_PSF
+Allegro MicroSystems, CB-PSF Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx)
+Allegro CB-PSF
+0
+5
+5
+Sensor_Current
+Allegro_CB_PSS
+Allegro MicroSystems, CB-PSS Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx)
+Allegro CB-PSS
+0
+5
+5
+Sensor_Current
+Allegro_PSOF-7_4.8x6.4mm_P1.60mm
+Allegro Microsystems PSOF-7, 4.8x6.4mm Body, 1.60mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS780-Datasheet.ashx)
+Allegro PSOF-7
+0
+7
+7
+Sensor_Current
+Allegro_QFN-12-10-1EP_3x3mm_P0.5mm
+Allegro Microsystems 12-Lead (10-Lead Populated) Quad Flat Pack, 3x3mm Body, 0.5mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS711-Datasheet.ashx)
+Allegro QFN 0.5
+0
+14
+10
+Sensor_Current
+Allegro_QSOP-24_3.9x8.7mm_P0.635mm
+Allegro Microsystems 24-Lead Plastic Shrink Small Outline Narrow Body Body [QSOP] (http://www.allegromicro.com/~/media/Files/Datasheets/ACS726-Datasheet.ashx?la=en)
+Allegro QSOP 0.635
+0
+24
+24
+Sensor_Current
+Allegro_SIP-4
+Allegro Microsystems SIP-4, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1363-Datasheet.ashx)
+Allegro SIP-4
+0
+4
+4
+Sensor_Current
+Diodes_SIP-3_4.1x1.5mm_P1.27mm
+Diodes SIP-3 Bulk Pack, 1.27mm Pitch (https://www.diodes.com/assets/Package-Files/SIP-3-Bulk-Pack.pdf)
+Diodes SIP-3 Bulk Pack
+0
+3
+3
+Sensor_Current
+Diodes_SIP-3_4.1x1.5mm_P2.65mm
+Diodes SIP-3 Ammo Pack, 2.65mm Pitch (https://www.diodes.com/assets/Package-Files/SIP-3-Ammo-Pack.pdf)
+Diodes SIP-3 Ammo Pack
+0
+3
+3
+Sensor_Current
+Honeywell_CSLW
+https://sensing.honeywell.com/honeywell-sensing-cslw-series-product-sheet-005861-1-en.pdf
+Miniature Wired Open-Loop Current Sensor
+0
+5
+5
+Sensor_Current
+LEM_CKSR
+LEM CKSR 6/15/25/50/75-NP Current Transducer, https://www.lem.com/sites/default/files/products_datasheets/cksr_75-np.pdf
+current transducer LEM
+0
+14
+14
+Sensor_Current
+LEM_HO8-NP
+LEM HO 8/15/25-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-np-0000_series.pdf)
+current transducer
+0
+13
+13
+Sensor_Current
+LEM_HO8-NSM
+LEM HO 8/15/25-NSM Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-nsm-0000_series.pdf)
+current transducer
+0
+13
+13
+Sensor_Current
+LEM_HO40-NP
+LEM HO 40/60/120/150-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-np_0100__1100_series.pdf)
+current transducer
+0
+13
+13
+Sensor_Current
+LEM_HTFS
+LEM HTFS x00-P current transducer (https://www.lem.com/sites/default/files/products_datasheets/htfs_200_800-p.pdf)
+HTFS current transducer
+0
+4
+4
+Sensor_Current
+LEM_HX02-P
+LEM HX02-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX03-P-SP2
+LEM HX03-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX04-P
+LEM HX04-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX05-NP
+LEM HX05-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf)
+hall current
+0
+8
+8
+Sensor_Current
+LEM_HX05-P-SP2
+LEM HX05-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX06-P
+LEM HX06-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX10-NP
+LEM HX10-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf)
+hall current
+0
+8
+8
+Sensor_Current
+LEM_HX10-P-SP2
+LEM HX10-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX15-NP
+LEM HX15-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf)
+hall current
+0
+8
+8
+Sensor_Current
+LEM_HX15-P-SP2
+LEM HX15-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX20-P-SP2
+LEM HX20-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX25-P-SP2
+LEM HX25-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_HX50-P-SP2
+LEM HX50-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf)
+hall current
+0
+6
+6
+Sensor_Current
+LEM_LA25-NP
+LEM LA 25-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/la%2025-np.pdf)
+Current sensor LEM
+0
+13
+13
+Sensor_Current
+LEM_LA25-P
+LEM Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/la_25-p.pdf)
+current transducer
+0
+3
+3
+Sensor_Current
+LEM_LTSR-NP
+LEM current transducer LEM_LTSR-NP 5V supply voltage series https://www.lem.com/sites/default/files/products_datasheets/ltsr_6-np.pdf
+Current transducer
+0
+10
+10
+Sensor_Distance
+AMS_OLGA12
+TMF8820/1/8 distance sensor
+TMF8820 TMF8821 TMF8828 
+0
+12
+12
+Sensor_Distance
+ST_VL53L1x
+VL53L1x distance sensor
+VL53L1CXV0FY1 VL53L1x
+0
+13
+12
+Sensor_Humidity
+Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm
+DFN, 4 Pin (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf)
+Sensirion DFN NoLead
+0
+10
+5
+Sensor_Humidity
+Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad
+Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf)
+DFN NoLead
+0
+4
+4
+Sensor_Humidity
+Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm
+Sensirion DFN-8 SHT3x-DIS (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf)
+sensirion dfn nolead
+0
+10
+9
+Sensor_Motion
+Analog_LGA-16_3.25x3mm_P0.5mm_LayoutBorder3x5y
+LGA, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL363.pdf#page=44)
+LGA NoLead CC-16-4
+0
+16
+16
+Sensor_Motion
+InvenSense_QFN-24_3x3mm_P0.4mm
+24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf)
+QFN 0.4
+0
+24
+24
+Sensor_Motion
+InvenSense_QFN-24_3x3mm_P0.4mm_NoMask
+24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf)
+QFN 0.4
+0
+25
+24
+Sensor_Motion
+InvenSense_QFN-24_4x4mm_P0.5mm
+24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf)
+QFN 0.5
+0
+24
+24
+Sensor_Motion
+InvenSense_QFN-24_4x4mm_P0.5mm_NoMask
+24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf)
+QFN 0.5
+0
+25
+24
+Sensor_Pressure
+CFSensor_XGZP6859D_7x7mm
+CFSensor XGZP6859D SO, 6 Pin (https://cfsensor.com/wp-content/uploads/2022/11/XGZP6859D-Pressure-Sensor-V2.5.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+CFSensor SO Sensor_Pressure
+0
+6
+6
+Sensor_Pressure
+CFSensor_XGZP6897x
+Port External Dia 3.13mm, Port Internal Dia 0.9mm, 8 Pin (https://cfsensor.com/wp-content/uploads/2022/11/XGZP6897D-Pressure-Sensor-V2.7.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py, hand modified
+sop sensor
+0
+8
+8
+Sensor_Pressure
+CFSensor_XGZP6899x
+Port External Dia 3mm, Port Internal Dia 1mm, 8 Pin (https://cfsensor.com/wp-content/uploads/2022/11/XGZP6899D-Pressure-Sensor-V2.8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py, hand modified
+sop sensor
+0
+8
+8
+Sensor_Pressure
+Freescale_98ARH99066A
+https://www.nxp.com/docs/en/data-sheet/MPXH6250A.pdf
+sensor pressure ssop 98ARH99066A
+0
+8
+8
+Sensor_Pressure
+Freescale_98ARH99089A
+https://www.nxp.com/docs/en/data-sheet/MPXH6250A.pdf
+sensor pressure ssop 98ARH99089A
+0
+8
+8
+Sensor_Pressure
+Honeywell_40PCxxxG1A
+https://www.honeywellscportal.com/index.php?ci_id=138832
+pressure sensor automotive honeywell
+0
+3
+3
+Sensor_Pressure
+TE_MS5525DSO-DBxxxyS
+Pressure Sensor, Dual-Barbed, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=MS5525DSO&DocType=DS&DocLang=English
+Pressure DualBarbed
+0
+14
+14
+Sensor_Pressure
+TE_MS5837-xxBA
+https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FMS5837-30BA%7FB1%7Fpdf%7FEnglish%7FENG_DS_MS5837-30BA_B1.pdf%7FCAT-BLPS0017
+MS5837 Ultra-small gel-filled pressure sensor with stainless steel cap
+0
+4
+4
+Sensor_Voltage
+LEM_LV25-P
+LEM LV25-P Voltage transducer, https://www.lem.com/sites/default/files/products_datasheets/lv_25-p.pdf
+LEM Hall Effect Voltage transducer
+0
+5
+5
+Socket
+3M_Textool_240-1288-00-0602J_2x20_P2.54mm
+3M 40-pin zero insertion force socket, though-hole, row spacing 25.4 mm (1000 mils)
+THT DIP DIL ZIF 25.4mm 1000mil Socket
+0
+40
+40
+Socket
+DIP_Socket-14_W4.3_W5.08_W7.62_W10.16_W10.9_3M_214-3339-00-0602J
+3M 14-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 7.62mm 300mil Socket
+0
+14
+14
+Socket
+DIP_Socket-16_W4.3_W5.08_W7.62_W10.16_W10.9_3M_216-3340-00-0602J
+3M 16-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 7.62mm 300mil Socket
+0
+16
+16
+Socket
+DIP_Socket-18_W4.3_W5.08_W7.62_W10.16_W10.9_3M_218-3341-00-0602J
+3M 18-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 7.62mm 300mil Socket
+0
+18
+18
+Socket
+DIP_Socket-20_W4.3_W5.08_W7.62_W10.16_W10.9_3M_220-3342-00-0602J
+3M 20-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 7.62mm 300mil Socket
+0
+20
+20
+Socket
+DIP_Socket-22_W6.9_W7.62_W10.16_W12.7_W13.5_3M_222-3343-00-0602J
+3M 22-pin zero insertion force socket, through-hole, row spacing 10.16 mm (400 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 10.16mm 400mil Socket
+0
+22
+22
+Socket
+DIP_Socket-24_W4.3_W5.08_W7.62_W10.16_W10.9_3M_224-5248-00-0602J
+3M 24-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 7.62mm 300mil Socket
+0
+24
+24
+Socket
+DIP_Socket-24_W11.9_W12.7_W15.24_W17.78_W18.5_3M_224-1275-00-0602J
+3M 24-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 15.24mm 600mil Socket
+0
+24
+24
+Socket
+DIP_Socket-28_W6.9_W7.62_W10.16_W12.7_W13.5_3M_228-4817-00-0602J
+3M 28-pin zero insertion force socket, through-hole, row spacing 10.16 mm (400 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 10.16mm 400mil Socket
+0
+28
+28
+Socket
+DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602J
+3M 28-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 15.24mm 600mil Socket
+0
+28
+28
+Socket
+DIP_Socket-32_W11.9_W12.7_W15.24_W17.78_W18.5_3M_232-1285-00-0602J
+3M 32-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 15.24mm 600mil Socket
+0
+32
+32
+Socket
+DIP_Socket-40_W11.9_W12.7_W15.24_W17.78_W18.5_3M_240-1280-00-0602J
+3M 40-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 15.24mm 600mil Socket
+0
+40
+40
+Socket
+DIP_Socket-40_W22.1_W22.86_W25.4_W27.94_W28.7_3M_240-3639-00-0602J
+3M 40-pin zero insertion force socket, through-hole, row spacing 25.4 mm (1000 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 25.4mm 1000mil Socket
+0
+40
+40
+Socket
+DIP_Socket-42_W11.9_W12.7_W15.24_W17.78_W18.5_3M_242-1281-00-0602J
+3M 42-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf
+THT DIP DIL ZIF 15.24mm 600mil Socket
+0
+42
+42
+Socket
+Wells_648-0482211SA01
+https://www.farnell.com/cad/316865.pdf?_ga=2.37208032.177107060.1530611323-249019997.1498114824
+48pin TSOP Socket
+0
+48
+48
+Symbol
+CE-Logo_8.5x6mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+CE-Logo_11.2x8mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+CE-Logo_16.8x12mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+CE-Logo_28x20mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+CE-Logo_42x30mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+CE-Logo_56.1x40mm_SilkScreen
+CE marking
+Logo CE certification
+0
+0
+0
+Symbol
+ESD-Logo_6.6x6mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+ESD-Logo_8.9x8mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+ESD-Logo_13.2x12mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+ESD-Logo_22x20mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+ESD-Logo_33x30mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+ESD-Logo_44.1x40mm_SilkScreen
+Electrostatic discharge Logo
+Logo ESD
+0
+0
+0
+Symbol
+EasterEgg_EWG1308-2013_ClassA
+Egg with 42x60mm Body-Size, ClassA, according to EWG1308/2013
+egg easter 
+0
+0
+0
+Symbol
+FCC-Logo_7.3x6mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+FCC-Logo_9.6x8mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+FCC-Logo_14.6x12mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+FCC-Logo_24.2x20mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+FCC-Logo_36.3x30mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+FCC-Logo_48.3x40mm_SilkScreen
+FCC marking
+Logo FCC certification
+0
+0
+0
+Symbol
+KiCad-Logo2_5mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_5mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_6mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_6mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_8mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_8mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_12mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_12mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_20mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_20mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_30mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_30mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_40mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo2_40mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_5mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_5mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_6mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_6mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_8mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_8mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_12mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_12mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_20mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_20mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_30mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_30mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_40mm_Copper
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+KiCad-Logo_40mm_SilkScreen
+KiCad Logo
+Logo KiCad
+0
+0
+0
+Symbol
+LayerMarker_2_3.81x2.54mm_TextH1mm_P1.27mm
+Layer marker, 2 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_2_3.81x2.54mm_TextH1mm_P1.27mm_BottomMirrored
+Layer marker, 2 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_2_3.81x2.54mm_TextH1mm_P1.27mm_Named
+Layer marker, 2 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_2_3.81x2.54mm_TextH1mm_P1.27mm_Named_BottomMirrored
+Layer marker, 2 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm
+Layer marker, 4 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm_BottomMirrored
+Layer marker, 4 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm_LowerMirrored
+Layer marker, 4 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm_Named
+Layer marker, 4 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm_Named_BottomMirrored
+Layer marker, 4 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mm_Named_LowerMirrored
+Layer marker, 4 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm
+Layer marker, 6 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm_BottomMirrored
+Layer marker, 6 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm_LowerMirrored
+Layer marker, 6 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm_Named
+Layer marker, 6 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm_Named_BottomMirrored
+Layer marker, 6 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_6_8.89x2.54mm_TextH1mm_P1.27mm_Named_LowerMirrored
+Layer marker, 6 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm
+Layer marker, 8 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm_BottomMirrored
+Layer marker, 8 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm_LowerMirrored
+Layer marker, 8 layers, simple ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm_Named
+Layer marker, 8 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm_Named_BottomMirrored
+Layer marker, 8 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_8_11.4x2.54mm_TextH1mm_P1.27mm_Named_LowerMirrored
+Layer marker, 8 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 10 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 10 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 10 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_Named
+Layer marker, 10 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_Named_BottomMirrored
+Layer marker, 10 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_10_14x2.54mm_TextH1mm_P1.27mm_Named_LowerMirrored
+Layer marker, 10 layers, layer names, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_12_16.5x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 12 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_12_16.5x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 12 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_12_16.5x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 12 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_14_19.1x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 14 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_14_19.1x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 14 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_14_19.1x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 14 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_16_21.6x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 16 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_16_21.6x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 16 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_16_21.6x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 16 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_18_24.1x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 18 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_18_24.1x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 18 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_18_24.1x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 18 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_20_26.7x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 20 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_20_26.7x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 20 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_20_26.7x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 20 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_22_29.2x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 22 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_22_29.2x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 22 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_22_29.2x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 22 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_24_31.8x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 24 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_24_31.8x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 24 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_24_31.8x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 24 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_26_34.3x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 26 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_26_34.3x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 26 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_26_34.3x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 26 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_28_36.8x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 28 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_28_36.8x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 28 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_28_36.8x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 28 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_30_39.4x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 30 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_30_39.4x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 30 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_30_39.4x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 30 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_32_41.9x2.54mm_TextH1mm_P1.27mm_AlNum
+Layer marker, 32 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_32_41.9x2.54mm_TextH1mm_P1.27mm_AlNum_BottomMirrored
+Layer marker, 32 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+LayerMarker_32_41.9x2.54mm_TextH1mm_P1.27mm_AlNum_LowerMirrored
+Layer marker, 32 layers, alphanumeric ordinals, text size 1mm, pitch 1.27mm, margin 1.27mm
+layer order identification numbering
+0
+0
+0
+Symbol
+OSHW-Logo2_7.3x6mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_7.3x6mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_9.8x8mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_9.8x8mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_14.6x12mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_14.6x12mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_24.3x20mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_24.3x20mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_36.5x30mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_36.5x30mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_48.7x40mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo2_48.7x40mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_5.7x6mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_5.7x6mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_7.5x8mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_7.5x8mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_11.4x12mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_11.4x12mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_19x20mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_19x20mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_28.5x30mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_28.5x30mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_38.1x40mm_Copper
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Logo_38.1x40mm_SilkScreen
+Open Source Hardware Logo
+Logo OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_6.7x6mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_6.7x6mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_8.9x8mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_8.9x8mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_13.4x12mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_13.4x12mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_22.3x20mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_22.3x20mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_33.5x30mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_33.5x30mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_44.5x40mm_Copper
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+OSHW-Symbol_44.5x40mm_SilkScreen
+Open Source Hardware Symbol
+Logo Symbol OSHW
+0
+0
+0
+Symbol
+Polarity_Center_Negative_6mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Negative_8mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Negative_12mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Negative_20mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Negative_30mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Negative_40mm_SilkScreen
+Polarity Logo, Center Negative
+Logo Polarity Center Negative
+0
+0
+0
+Symbol
+Polarity_Center_Positive_6mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+Polarity_Center_Positive_8mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+Polarity_Center_Positive_12mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+Polarity_Center_Positive_20mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+Polarity_Center_Positive_30mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+Polarity_Center_Positive_40mm_SilkScreen
+Polarity Logo, Center Positive
+Logo Polarity Center Positive
+0
+0
+0
+Symbol
+RoHS-Logo_6mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+RoHS-Logo_8mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+RoHS-Logo_12mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+RoHS-Logo_20mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+RoHS-Logo_30mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+RoHS-Logo_40mm_SilkScreen
+Restriction of Hazardous Substances Directive Logo
+Logo RoHS
+0
+0
+0
+Symbol
+Smolhaj_Scale_0.1
+BLÅHAJ , smol 50cm nominal, 1:10 scale (56mm Snoot-Flosse), MPN 205.406.63 (https://www.ikea.com/gb/en/p/blahaj-soft-toy-baby-shark-20540663/)
+Ikea Smol Haj
+0
+0
+0
+Symbol
+Symbol_Attention_Triangle_8x7mm_Copper
+Symbol, Attention, 8x7mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_Attention_Triangle_17x15mm_Copper
+Symbol, attention, 17x15mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_Barrel_Polarity
+Barrel connector polarity indicator
+barrel polarity
+0
+0
+0
+Symbol
+Symbol_CC-Attribution_CopperTop_Big
+Creative Commons symbol, CC-BY, copper layer, 10mm
+attribution license graphic
+0
+0
+0
+Symbol
+Symbol_CC-Attribution_CopperTop_Small
+Creative Commons symbol, CC-BY, copper layer, 5mm
+
+0
+0
+0
+Symbol
+Symbol_CC-Noncommercial_CopperTop_Big
+Creative Commons symbol, CC-NC, copper layer, 10mm
+noncommercial non-commercial license graphic
+0
+0
+0
+Symbol
+Symbol_CC-Noncommercial_CopperTop_Small
+Creative Commons symbol, CC-NC, copper layer, 5mm
+noncommercial non-commercial license graphic
+0
+0
+0
+Symbol
+Symbol_CC-PublicDomain_CopperTop_Big
+Creative Commons symbol, CC0, copper layer, 10mm
+public domain license graphic
+0
+0
+0
+Symbol
+Symbol_CC-PublicDomain_CopperTop_Small
+Creative Commons symbol, CC0, copper layer, 10mm
+public domain license graphic
+0
+0
+0
+Symbol
+Symbol_CC-PublicDomain_SilkScreenTop_Big
+Creative Commons symbol, CC0, silkscreen layer, 10mm
+public domain license graphic
+0
+0
+0
+Symbol
+Symbol_CC-ShareAlike_CopperTop_Big
+Creative Commons symbol, CC-SA, copper layer, 10mm
+share-alike license graphic
+0
+0
+0
+Symbol
+Symbol_CC-ShareAlike_CopperTop_Small
+Creative Commons symbol, CC-SA, copper layer, 5mm
+share-alike license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommonsPublicDomain_CopperTop_Small
+Creative Commons symbol, CC0, with words, copper layer, 10mm
+public domain license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommonsPublicDomain_SilkScreenTop_Small
+Creative Commons symbol, CC0, with words, silkscreen layer, 10mm
+public domain license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommons_CopperTop_Type1_Big
+Creative Commons symbol, CC, with words, copper layer, 10mm
+license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommons_CopperTop_Type2_Big
+Creative Commons symbol, CC, copper layer, 10mm
+license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommons_CopperTop_Type2_Small
+Creative Commons symbol, CC, copper layer, 5mm
+license graphic
+0
+0
+0
+Symbol
+Symbol_CreativeCommons_SilkScreenTop_Type2_Big
+Creative Commons symbol, CC0, silkscreen layer, 10mm
+license graphic
+0
+0
+0
+Symbol
+Symbol_Danger_8x8mm_Copper
+Danger symbol, 8x8mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_Danger_18x16mm_Copper
+Danger symbol, 18x16mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_ESD-Logo-Text_CopperTop
+
+
+0
+0
+0
+Symbol
+Symbol_ESD-Logo_CopperTop
+ESD-Logo, similar JEDEC-14, without text, ohne Text, Copper Top,
+ESD-Logo, similar JEDEC-14, without text, ohne Text, Copper Top,
+0
+0
+0
+Symbol
+Symbol_GNU-GPL_CopperTop_Big
+Symbol, GNU-GPL, Copper Top, Big,
+Symbol, GNU-GPL, Copper Top, Big,
+0
+0
+0
+Symbol
+Symbol_GNU-GPL_CopperTop_Small
+Symbol, GNU-GPL, Copper Top, Small,
+Symbol, GNU-GPL, Copper Top, Small,
+0
+0
+0
+Symbol
+Symbol_GNU-Logo_CopperTop
+GNU-Logo, GNU-Head, GNU-Kopf, Copper Top,
+GNU-Logo, GNU-Head, GNU-Kopf, Copper Top,
+0
+0
+0
+Symbol
+Symbol_GNU-Logo_SilkscreenTop
+GNU-Logo, GNU-Head, GNU-Kopf, Silkscreen,
+GNU-Logo, GNU-Head, GNU-Kopf, Silkscreen,
+0
+0
+0
+Symbol
+Symbol_HighVoltage_NoTriangle_2x5mm_Copper
+High voltage symbol, no triangle, 2x5mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_HighVoltage_NoTriangle_6x15mm_Copper
+High voltage symbol, no triangle, 6x15mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_HighVoltage_Triangle_6x6mm_Copper
+High voltage symbol, in triangle, 6x6mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_HighVoltage_Triangle_8x7mm_Copper
+High voltage symbol, in triangle, 8x7mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+Symbol_HighVoltage_Triangle_17x15mm_Copper
+High voltage symbol, in triangle, 17x15mm, copper layer
+warning graphic
+0
+0
+0
+Symbol
+UKCA-Logo_6x6mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+UKCA-Logo_8x8mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+UKCA-Logo_12x12mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+UKCA-Logo_20x20mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+UKCA-Logo_30x30mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+UKCA-Logo_40x40mm_SilkScreen
+UKCA marking
+Logo UKCA marking
+0
+0
+0
+Symbol
+WEEE-Logo_4.2x6mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+Symbol
+WEEE-Logo_5.6x8mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+Symbol
+WEEE-Logo_8.4x12mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+Symbol
+WEEE-Logo_14x20mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+Symbol
+WEEE-Logo_21x30mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+Symbol
+WEEE-Logo_28.1x40mm_SilkScreen
+Waste Electrical and Electronic Equipment Directive
+Logo WEEE
+0
+0
+0
+TerminalBlock
+TerminalBlock_Altech_AK300-2_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_Altech_AK300-3_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+3
+3
+TerminalBlock
+TerminalBlock_Altech_AK300-4_P5.00mm
+Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf
+Altech AK300 terminal block pitch 5.0mm
+0
+4
+4
+TerminalBlock
+TerminalBlock_Degson_DG246-3.81-03P
+DEGSON ELECTRONICS DG246 terminal block, https://www.degson.com/index.php?a=downloadFile&id=1090277
+connector terminal block
+0
+6
+3
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm
+terminal block MaiXu MX126-5.0-02P, 2 pins, pitch 5mm, size 10.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-02P pitch 5mm size 10.5x7.8mm drill 1.3mm pad 2.8mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm
+terminal block MaiXu MX126-5.0-03P, 3 pins, pitch 5mm, size 15.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-03P pitch 5mm size 15.5x7.8mm drill 1.3mm pad 2.8mm
+0
+3
+3
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm
+terminal block MaiXu MX126-5.0-04P, 4 pins, pitch 5mm, size 20.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-04P pitch 5mm size 20.5x7.8mm drill 1.3mm pad 2.8mm
+0
+4
+4
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-05P_1x05_P5.00mm
+terminal block MaiXu MX126-5.0-05P, 5 pins, pitch 5mm, size 25.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-05P pitch 5mm size 25.5x7.8mm drill 1.3mm pad 2.8mm
+0
+5
+5
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-06P_1x06_P5.00mm
+terminal block MaiXu MX126-5.0-06P, 6 pins, pitch 5mm, size 30.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-06P pitch 5mm size 30.5x7.8mm drill 1.3mm pad 2.8mm
+0
+6
+6
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-07P_1x07_P5.00mm
+terminal block MaiXu MX126-5.0-07P, 7 pins, pitch 5mm, size 35.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-07P pitch 5mm size 35.5x7.8mm drill 1.3mm pad 2.8mm
+0
+7
+7
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-08P_1x08_P5.00mm
+terminal block MaiXu MX126-5.0-08P, 8 pins, pitch 5mm, size 40.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-08P pitch 5mm size 40.5x7.8mm drill 1.3mm pad 2.8mm
+0
+8
+8
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-09P_1x09_P5.00mm
+terminal block MaiXu MX126-5.0-09P, 9 pins, pitch 5mm, size 45.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-09P pitch 5mm size 45.5x7.8mm drill 1.3mm pad 2.8mm
+0
+9
+9
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-10P_1x10_P5.00mm
+terminal block MaiXu MX126-5.0-10P, 10 pins, pitch 5mm, size 50.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-10P pitch 5mm size 50.5x7.8mm drill 1.3mm pad 2.8mm
+0
+10
+10
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-11P_1x11_P5.00mm
+terminal block MaiXu MX126-5.0-11P, 11 pins, pitch 5mm, size 55.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-11P pitch 5mm size 55.5x7.8mm drill 1.3mm pad 2.8mm
+0
+11
+11
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-12P_1x12_P5.00mm
+terminal block MaiXu MX126-5.0-12P, 12 pins, pitch 5mm, size 60.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-12P pitch 5mm size 60.5x7.8mm drill 1.3mm pad 2.8mm
+0
+12
+12
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-13P_1x13_P5.00mm
+terminal block MaiXu MX126-5.0-13P, 13 pins, pitch 5mm, size 65.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-13P pitch 5mm size 65.5x7.8mm drill 1.3mm pad 2.8mm
+0
+13
+13
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-14P_1x14_P5.00mm
+terminal block MaiXu MX126-5.0-14P, 14 pins, pitch 5mm, size 70.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-14P pitch 5mm size 70.5x7.8mm drill 1.3mm pad 2.8mm
+0
+14
+14
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-15P_1x15_P5.00mm
+terminal block MaiXu MX126-5.0-15P, 15 pins, pitch 5mm, size 75.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-15P pitch 5mm size 75.5x7.8mm drill 1.3mm pad 2.8mm
+0
+15
+15
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-16P_1x16_P5.00mm
+terminal block MaiXu MX126-5.0-16P, 16 pins, pitch 5mm, size 80.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-16P pitch 5mm size 80.5x7.8mm drill 1.3mm pad 2.8mm
+0
+16
+16
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-17P_1x17_P5.00mm
+terminal block MaiXu MX126-5.0-17P, 17 pins, pitch 5mm, size 85.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-17P pitch 5mm size 85.5x7.8mm drill 1.3mm pad 2.8mm
+0
+17
+17
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-18P_1x18_P5.00mm
+terminal block MaiXu MX126-5.0-18P, 18 pins, pitch 5mm, size 90.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-18P pitch 5mm size 90.5x7.8mm drill 1.3mm pad 2.8mm
+0
+18
+18
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-19P_1x19_P5.00mm
+terminal block MaiXu MX126-5.0-19P, 19 pins, pitch 5mm, size 95.5x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-19P pitch 5mm size 95.5x7.8mm drill 1.3mm pad 2.8mm
+0
+19
+19
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-20P_1x20_P5.00mm
+terminal block MaiXu MX126-5.0-20P, 20 pins, pitch 5mm, size 100x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-20P pitch 5mm size 100x7.8mm drill 1.3mm pad 2.8mm
+0
+20
+20
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-21P_1x21_P5.00mm
+terminal block MaiXu MX126-5.0-21P, 21 pins, pitch 5mm, size 106x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-21P pitch 5mm size 106x7.8mm drill 1.3mm pad 2.8mm
+0
+21
+21
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-22P_1x22_P5.00mm
+terminal block MaiXu MX126-5.0-22P, 22 pins, pitch 5mm, size 110x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-22P pitch 5mm size 110x7.8mm drill 1.3mm pad 2.8mm
+0
+22
+22
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-23P_1x23_P5.00mm
+terminal block MaiXu MX126-5.0-23P, 23 pins, pitch 5mm, size 116x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-23P pitch 5mm size 116x7.8mm drill 1.3mm pad 2.8mm
+0
+23
+23
+TerminalBlock
+TerminalBlock_MaiXu_MX126-5.0-24P_1x24_P5.00mm
+terminal block MaiXu MX126-5.0-24P, 24 pins, pitch 5mm, size 120x7.8mm, drill diameter 1.3mm, pad diameter 2.8mm, https://www.lcsc.com/datasheet/lcsc_datasheet_2309150913_MAX-MX126-5-0-03P-GN01-Cu-S-A_C5188435.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MaiXu
+THT terminal block MaiXu MX126-5.0-24P pitch 5mm size 120x7.8mm drill 1.3mm pad 2.8mm
+0
+24
+24
+TerminalBlock
+TerminalBlock_Wuerth_691311400102_P7.62mm
+https://katalog.we-online.de/em/datasheet/6913114001xx.pdf
+Wuerth WR-TBL Series 3114 terminal block pitch 7.62mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-2P, 2 pins, pitch 2.54mm, size 5.58x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-2P pitch 2.54mm size 5.58x6.5mm drill 1.2mm pad 2mm
+0
+2
+2
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-3P, 3 pins, pitch 2.54mm, size 8.12x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-3P pitch 2.54mm size 8.12x6.5mm drill 1.2mm pad 2mm
+0
+3
+3
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-4P, 4 pins, pitch 2.54mm, size 10.7x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-4P pitch 2.54mm size 10.7x6.5mm drill 1.2mm pad 2mm
+0
+4
+4
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-5P, 5 pins, pitch 2.54mm, size 13.2x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-5P pitch 2.54mm size 13.2x6.5mm drill 1.2mm pad 2mm
+0
+5
+5
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-6P_1x06_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-6P, 6 pins, pitch 2.54mm, size 15.7x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-6P pitch 2.54mm size 15.7x6.5mm drill 1.2mm pad 2mm
+0
+6
+6
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-7P_1x07_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-7P, 7 pins, pitch 2.54mm, size 18.3x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-7P pitch 2.54mm size 18.3x6.5mm drill 1.2mm pad 2mm
+0
+7
+7
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-8P_1x08_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-8P, 8 pins, pitch 2.54mm, size 20.8x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-8P pitch 2.54mm size 20.8x6.5mm drill 1.2mm pad 2mm
+0
+8
+8
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-9P_1x09_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-9P, 9 pins, pitch 2.54mm, size 23.4x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-9P pitch 2.54mm size 23.4x6.5mm drill 1.2mm pad 2mm
+0
+9
+9
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-10P_1x10_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-10P, 10 pins, pitch 2.54mm, size 25.9x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-10P pitch 2.54mm size 25.9x6.5mm drill 1.2mm pad 2mm
+0
+10
+10
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-11P_1x11_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-11P, 11 pins, pitch 2.54mm, size 28.4x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-11P pitch 2.54mm size 28.4x6.5mm drill 1.2mm pad 2mm
+0
+11
+11
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-12P_1x12_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-12P, 12 pins, pitch 2.54mm, size 31x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-12P pitch 2.54mm size 31x6.5mm drill 1.2mm pad 2mm
+0
+12
+12
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-13P_1x13_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-13P, 13 pins, pitch 2.54mm, size 33.5x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-13P pitch 2.54mm size 33.5x6.5mm drill 1.2mm pad 2mm
+0
+13
+13
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-14P_1x14_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-14P, 14 pins, pitch 2.54mm, size 36.1x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-14P pitch 2.54mm size 36.1x6.5mm drill 1.2mm pad 2mm
+0
+14
+14
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-15P_1x15_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-15P, 15 pins, pitch 2.54mm, size 38.6x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-15P pitch 2.54mm size 38.6x6.5mm drill 1.2mm pad 2mm
+0
+15
+15
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-16P_1x16_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-16P, 16 pins, pitch 2.54mm, size 41.1x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-16P pitch 2.54mm size 41.1x6.5mm drill 1.2mm pad 2mm
+0
+16
+16
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-17P_1x17_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-17P, 17 pins, pitch 2.54mm, size 43.7x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-17P pitch 2.54mm size 43.7x6.5mm drill 1.2mm pad 2mm
+0
+17
+17
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-18P_1x18_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-18P, 18 pins, pitch 2.54mm, size 46.2x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-18P pitch 2.54mm size 46.2x6.5mm drill 1.2mm pad 2mm
+0
+18
+18
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-19P_1x19_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-19P, 19 pins, pitch 2.54mm, size 48.8x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-19P pitch 2.54mm size 48.8x6.5mm drill 1.2mm pad 2mm
+0
+19
+19
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-20P_1x20_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-20P, 20 pins, pitch 2.54mm, size 51.3x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-20P pitch 2.54mm size 51.3x6.5mm drill 1.2mm pad 2mm
+0
+20
+20
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-21P_1x21_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-21P, 21 pins, pitch 2.54mm, size 53.8x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-21P pitch 2.54mm size 53.8x6.5mm drill 1.2mm pad 2mm
+0
+21
+21
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-22P_1x22_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-22P, 22 pins, pitch 2.54mm, size 56.4x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-22P pitch 2.54mm size 56.4x6.5mm drill 1.2mm pad 2mm
+0
+22
+22
+TerminalBlock
+TerminalBlock_Xinya_XY308-2.54-23P_1x23_P2.54mm_Horizontal
+Terminal Block Xinya XY308-2.54-23P, 23 pins, pitch 2.54mm, size 58.9x6.5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.xinyaelectronic.com/product/xy308-254, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Xinya
+THT Terminal Block Xinya XY308-2.54-23P pitch 2.54mm size 58.9x6.5mm drill 1.2mm pad 2mm
+0
+23
+23
+TerminalBlock
+TerminalBlock_bornier-2_P5.08mm
+simple 2-pin terminal block, pitch 5.08mm, revamped version of bornier2
+terminal block bornier2
+0
+2
+2
+TerminalBlock
+TerminalBlock_bornier-3_P5.08mm
+simple 3-pin terminal block, pitch 5.08mm, revamped version of bornier3
+terminal block bornier3
+0
+3
+3
+TerminalBlock
+TerminalBlock_bornier-4_P5.08mm
+simple 4-pin terminal block, pitch 5.08mm, revamped version of bornier4
+terminal block bornier4
+0
+4
+4
+TerminalBlock
+TerminalBlock_bornier-5_P5.08mm
+simple 5-pin terminal block, pitch 5.08mm, revamped version of bornier5
+terminal block bornier5
+0
+5
+5
+TerminalBlock
+TerminalBlock_bornier-6_P5.08mm
+simple 6pin terminal block, pitch 5.08mm, revamped version of bornier6
+terminal block bornier6
+0
+6
+6
+TerminalBlock
+TerminalBlock_bornier-8_P5.08mm
+simple 8pin terminal block, pitch 5.08mm, revamped version of bornier8
+terminal block bornier8
+0
+8
+8
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 19963, 2 pins, pitch 3.5mm, size 7.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/19963.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 19963 pitch 3.5mm size 7.7x7mm drill 1.2mm pad 2.4mm
+0
+2
+2
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x02_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10693, vertical (cable from top), 2 pins, pitch 3.5mm, size 8x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10693.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10693 vertical pitch 3.5mm size 8x8.3mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x03_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 3.5mm, size 11.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/20193.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 20193 pitch 3.5mm size 11.2x7mm drill 1.2mm pad 2.4mm
+0
+3
+3
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x03_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10694, vertical (cable from top), 3 pins, pitch 3.5mm, size 11.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10694.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10694 vertical pitch 3.5mm size 11.5x8.3mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 20001, 4 pins, pitch 3.5mm, size 14.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/20001.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 20001 pitch 3.5mm size 14.7x7mm drill 1.2mm pad 2.4mm
+0
+4
+4
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x04_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10695, vertical (cable from top), 4 pins, pitch 3.5mm, size 15x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10695.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10695 vertical pitch 3.5mm size 15x8.3mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x05_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 20223, 5 pins, pitch 3.5mm, size 18.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/20223.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 20223 pitch 3.5mm size 18.2x7mm drill 1.2mm pad 2.4mm
+0
+5
+5
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x05_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10696, vertical (cable from top), 5 pins, pitch 3.5mm, size 18.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10696.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10696 vertical pitch 3.5mm size 18.5x8.3mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x06_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 19964, 6 pins, pitch 3.5mm, size 21.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/19964.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 19964 pitch 3.5mm size 21.7x7mm drill 1.2mm pad 2.4mm
+0
+6
+6
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x06_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 6 pins, pitch 3.5mm, size 22x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10697 vertical pitch 3.5mm size 22x8.3mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x07_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10684, 7 pins, pitch 3.5mm, size 25.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10684.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10684 pitch 3.5mm size 25.2x7mm drill 1.2mm pad 2.4mm
+0
+7
+7
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x07_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10698, vertical (cable from top), 7 pins, pitch 3.5mm, size 25.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10698.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10698 vertical pitch 3.5mm size 25.5x8.3mm drill 1.3mm pad 2.6mm
+0
+7
+7
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x08_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 3.5mm, size 28.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/19965.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 19965 pitch 3.5mm size 28.7x7mm drill 1.2mm pad 2.4mm
+0
+8
+8
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x08_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10699, vertical (cable from top), 8 pins, pitch 3.5mm, size 29x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10699.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10699 vertical pitch 3.5mm size 29x8.3mm drill 1.3mm pad 2.6mm
+0
+8
+8
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x09_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10686, 9 pins, pitch 3.5mm, size 32.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10686.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10686 pitch 3.5mm size 32.2x7mm drill 1.2mm pad 2.4mm
+0
+9
+9
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x09_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10700, vertical (cable from top), 9 pins, pitch 3.5mm, size 32.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10700.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10700 vertical pitch 3.5mm size 32.5x8.3mm drill 1.3mm pad 2.6mm
+0
+9
+9
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x10_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10687, 10 pins, pitch 3.5mm, size 35.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10687.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10687 pitch 3.5mm size 35.7x7mm drill 1.2mm pad 2.4mm
+0
+10
+10
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x10_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10701, vertical (cable from top), 10 pins, pitch 3.5mm, size 36x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10701.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10701 vertical pitch 3.5mm size 36x8.3mm drill 1.3mm pad 2.6mm
+0
+10
+10
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x11_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10688, 11 pins, pitch 3.5mm, size 39.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10688.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 39.2x7mm drill 1.2mm pad 2.4mm
+0
+11
+11
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x11_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10702, vertical (cable from top), 11 pins, pitch 3.5mm, size 39.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10702.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10702 vertical pitch 3.5mm size 39.5x8.3mm drill 1.3mm pad 2.6mm
+0
+11
+11
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x12_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10689, 12 pins, pitch 3.5mm, size 42.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10689.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10689 pitch 3.5mm size 42.7x7mm drill 1.2mm pad 2.4mm
+0
+12
+12
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x12_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10703, vertical (cable from top), 12 pins, pitch 3.5mm, size 43x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10703.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10703 vertical pitch 3.5mm size 43x8.3mm drill 1.3mm pad 2.6mm
+0
+12
+12
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x13_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10690, 13 pins, pitch 3.5mm, size 46.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10690.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10690 pitch 3.5mm size 46.2x7mm drill 1.2mm pad 2.4mm
+0
+13
+13
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x13_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10704, vertical (cable from top), 13 pins, pitch 3.5mm, size 46.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10704.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10704 vertical pitch 3.5mm size 46.5x8.3mm drill 1.3mm pad 2.6mm
+0
+13
+13
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x14_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10691, 14 pins, pitch 3.5mm, size 49.7x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10691.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10691 pitch 3.5mm size 49.7x7mm drill 1.2mm pad 2.4mm
+0
+14
+14
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x14_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10705, vertical (cable from top), 14 pins, pitch 3.5mm, size 50x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10705.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10705 vertical pitch 3.5mm size 50x8.3mm drill 1.3mm pad 2.6mm
+0
+14
+14
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x15_P3.50mm_Horizontal
+Terminal Block 4Ucon ItemNo. 10692, 15 pins, pitch 3.5mm, size 53.2x7mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.4uconnector.com/online/object/4udrawing/10692.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10692 pitch 3.5mm size 53.2x7mm drill 1.2mm pad 2.4mm
+0
+15
+15
+TerminalBlock_4Ucon
+TerminalBlock_4Ucon_1x15_P3.50mm_Vertical
+Terminal Block 4Ucon ItemNo. 10706, vertical (cable from top), 15 pins, pitch 3.5mm, size 53.5x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.4uconnector.com/online/object/4udrawing/10706.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_4Ucon
+THT Terminal Block 4Ucon ItemNo. 10706 vertical pitch 3.5mm size 53.5x8.3mm drill 1.3mm pad 2.6mm
+0
+15
+15
+TerminalBlock_Altech
+Altech_AK100_1x02_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+2
+2
+TerminalBlock_Altech
+Altech_AK100_1x03_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+3
+3
+TerminalBlock_Altech
+Altech_AK100_1x04_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+4
+4
+TerminalBlock_Altech
+Altech_AK100_1x05_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+5
+5
+TerminalBlock_Altech
+Altech_AK100_1x06_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+6
+6
+TerminalBlock_Altech
+Altech_AK100_1x07_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+7
+7
+TerminalBlock_Altech
+Altech_AK100_1x08_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+8
+8
+TerminalBlock_Altech
+Altech_AK100_1x09_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+9
+9
+TerminalBlock_Altech
+Altech_AK100_1x10_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+10
+10
+TerminalBlock_Altech
+Altech_AK100_1x11_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+11
+11
+TerminalBlock_Altech
+Altech_AK100_1x12_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+12
+12
+TerminalBlock_Altech
+Altech_AK100_1x13_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+13
+13
+TerminalBlock_Altech
+Altech_AK100_1x14_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+14
+14
+TerminalBlock_Altech
+Altech_AK100_1x15_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+15
+15
+TerminalBlock_Altech
+Altech_AK100_1x16_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+16
+16
+TerminalBlock_Altech
+Altech_AK100_1x17_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+17
+17
+TerminalBlock_Altech
+Altech_AK100_1x18_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+18
+18
+TerminalBlock_Altech
+Altech_AK100_1x19_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+19
+19
+TerminalBlock_Altech
+Altech_AK100_1x20_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+20
+20
+TerminalBlock_Altech
+Altech_AK100_1x21_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+21
+21
+TerminalBlock_Altech
+Altech_AK100_1x22_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+22
+22
+TerminalBlock_Altech
+Altech_AK100_1x23_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+23
+23
+TerminalBlock_Altech
+Altech_AK100_1x24_P5.00mm
+Altech AK100 serie terminal block (Script generated with StandardBox.py) (https://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK100 serie connector
+0
+24
+24
+TerminalBlock_Altech
+Altech_AK300_1x02_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+2
+2
+TerminalBlock_Altech
+Altech_AK300_1x03_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+3
+3
+TerminalBlock_Altech
+Altech_AK300_1x04_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+4
+4
+TerminalBlock_Altech
+Altech_AK300_1x05_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+5
+5
+TerminalBlock_Altech
+Altech_AK300_1x06_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+6
+6
+TerminalBlock_Altech
+Altech_AK300_1x07_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+7
+7
+TerminalBlock_Altech
+Altech_AK300_1x08_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+8
+8
+TerminalBlock_Altech
+Altech_AK300_1x09_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+9
+9
+TerminalBlock_Altech
+Altech_AK300_1x10_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+10
+10
+TerminalBlock_Altech
+Altech_AK300_1x11_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+11
+11
+TerminalBlock_Altech
+Altech_AK300_1x12_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+12
+12
+TerminalBlock_Altech
+Altech_AK300_1x13_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+13
+13
+TerminalBlock_Altech
+Altech_AK300_1x14_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+14
+14
+TerminalBlock_Altech
+Altech_AK300_1x15_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+15
+15
+TerminalBlock_Altech
+Altech_AK300_1x16_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+16
+16
+TerminalBlock_Altech
+Altech_AK300_1x17_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+17
+17
+TerminalBlock_Altech
+Altech_AK300_1x18_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+18
+18
+TerminalBlock_Altech
+Altech_AK300_1x19_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+19
+19
+TerminalBlock_Altech
+Altech_AK300_1x20_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+20
+20
+TerminalBlock_Altech
+Altech_AK300_1x21_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+21
+21
+TerminalBlock_Altech
+Altech_AK300_1x22_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+22
+22
+TerminalBlock_Altech
+Altech_AK300_1x23_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+23
+23
+TerminalBlock_Altech
+Altech_AK300_1x24_P5.00mm_45-Degree
+Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF)
+Altech AK300 serie connector
+0
+24
+24
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-02, 2 pins, pitch 5.08mm, size 10.8x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-02 pitch 5.08mm size 10.8x10.2mm drill 1.6mm pad 2.4mm
+0
+2
+2
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-03_1x03_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-03, 3 pins, pitch 5.08mm, size 15.8x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-03 pitch 5.08mm size 15.8x10.2mm drill 1.6mm pad 2.4mm
+0
+3
+3
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-04_1x04_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-04, 4 pins, pitch 5.08mm, size 20.9x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-04 pitch 5.08mm size 20.9x10.2mm drill 1.6mm pad 2.4mm
+0
+4
+4
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-05_1x05_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-05, 5 pins, pitch 5.08mm, size 26x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-05 pitch 5.08mm size 26x10.2mm drill 1.6mm pad 2.4mm
+0
+5
+5
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-06_1x06_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-06, 6 pins, pitch 5.08mm, size 31.1x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-06 pitch 5.08mm size 31.1x10.2mm drill 1.6mm pad 2.4mm
+0
+6
+6
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-07_1x07_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-07, 7 pins, pitch 5.08mm, size 36.2x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-07 pitch 5.08mm size 36.2x10.2mm drill 1.6mm pad 2.4mm
+0
+7
+7
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-08_1x08_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-08, 8 pins, pitch 5.08mm, size 41.2x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-08 pitch 5.08mm size 41.2x10.2mm drill 1.6mm pad 2.4mm
+0
+8
+8
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-09_1x09_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-09, 9 pins, pitch 5.08mm, size 46.3x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-09 pitch 5.08mm size 46.3x10.2mm drill 1.6mm pad 2.4mm
+0
+9
+9
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-10_1x10_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-10, 10 pins, pitch 5.08mm, size 51.4x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-10 pitch 5.08mm size 51.4x10.2mm drill 1.6mm pad 2.4mm
+0
+10
+10
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-11_1x11_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-11, 11 pins, pitch 5.08mm, size 56.5x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-11 pitch 5.08mm size 56.5x10.2mm drill 1.6mm pad 2.4mm
+0
+11
+11
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-12_1x12_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-12, 12 pins, pitch 5.08mm, size 61.6x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-12 pitch 5.08mm size 61.6x10.2mm drill 1.6mm pad 2.4mm
+0
+12
+12
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-13_1x13_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-13, 13 pins, pitch 5.08mm, size 66.6x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-13 pitch 5.08mm size 66.6x10.2mm drill 1.6mm pad 2.4mm
+0
+13
+13
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-14_1x14_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-14, 14 pins, pitch 5.08mm, size 71.7x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-14 pitch 5.08mm size 71.7x10.2mm drill 1.6mm pad 2.4mm
+0
+14
+14
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-15_1x15_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-15, 15 pins, pitch 5.08mm, size 76.8x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-15 pitch 5.08mm size 76.8x10.2mm drill 1.6mm pad 2.4mm
+0
+15
+15
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-16_1x16_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-16, 16 pins, pitch 5.08mm, size 81.9x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-16 pitch 5.08mm size 81.9x10.2mm drill 1.6mm pad 2.4mm
+0
+16
+16
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-17_1x17_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-17, 17 pins, pitch 5.08mm, size 87x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-17 pitch 5.08mm size 87x10.2mm drill 1.6mm pad 2.4mm
+0
+17
+17
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-18_1x18_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-18, 18 pins, pitch 5.08mm, size 92x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-18 pitch 5.08mm size 92x10.2mm drill 1.6mm pad 2.4mm
+0
+18
+18
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-19_1x19_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-19, 19 pins, pitch 5.08mm, size 97.1x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-19 pitch 5.08mm size 97.1x10.2mm drill 1.6mm pad 2.4mm
+0
+19
+19
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-20_1x20_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-20, 20 pins, pitch 5.08mm, size 102x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-20 pitch 5.08mm size 102x10.2mm drill 1.6mm pad 2.4mm
+0
+20
+20
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-21_1x21_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-21, 21 pins, pitch 5.08mm, size 107x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-21 pitch 5.08mm size 107x10.2mm drill 1.6mm pad 2.4mm
+0
+21
+21
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-22_1x22_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-22, 22 pins, pitch 5.08mm, size 112x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-22 pitch 5.08mm size 112x10.2mm drill 1.6mm pad 2.4mm
+0
+22
+22
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-23_1x23_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-23, 23 pins, pitch 5.08mm, size 117x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-23 pitch 5.08mm size 117x10.2mm drill 1.6mm pad 2.4mm
+0
+23
+23
+TerminalBlock_CUI
+TerminalBlock_CUI_TB007-508-24_1x24_P5.08mm_Horizontal
+Terminal Block CUI TB007-508-24, 24 pins, pitch 5.08mm, size 123x10.2mm, drill diameter 1.6mm, pad diameter 2.4mm, https://www.cuidevices.com/product/resource/tb007-508.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_CUI
+THT Terminal Block CUI TB007-508-24 pitch 5.08mm size 123x10.2mm drill 1.6mm pad 2.4mm
+0
+24
+24
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+2
+2
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-03_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+3
+3
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-04_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+4
+4
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-05_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+5
+5
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-06_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+6
+6
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-07_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+7
+7
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-08_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+8
+8
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-09_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+9
+9
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-10_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+10
+10
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-11_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+11
+11
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-12_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+12
+12
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-13_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+13
+13
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-14_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+14
+14
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-15_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+15
+15
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-16_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+16
+16
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-17_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+17
+17
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-18_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+18
+18
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-19_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+19
+19
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-20_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+20
+20
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-21_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+21
+21
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-22_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+22
+22
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-23_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+23
+23
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-24_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+24
+24
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-25_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+25
+25
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-26_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+26
+26
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-27_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+27
+27
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-28_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+28
+28
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-29_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+29
+29
+TerminalBlock_Dinkle
+TerminalBlock_Dinkle_DT-55-B01X-30_P10.00mm
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX
+Dinkle DT-55-B01X Terminal Block  pitch 10.00mm
+0
+30
+30
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_Boxed
+single screw terminal block Metz Connect 360271, block size 9x7.3mm, drill diameter 1.5mm, pad diameter 3mm, https://www.metz-connect.com/media/file/8a8a80ea6e17c2e6016e3b8ef7cd2d65.de.0/product_summary_u_contact_de_en_fr.pdf , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360271 size 9x7.3mm drill 1.5mm pad 3mm
+0
+1
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360272_1x01_Horizontal_ScrewM2.6
+single screw terminal block Metz Connect 360272, block size 4x4mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360272.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360272 size 4x4mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360273_1x01_Horizontal_ScrewM2.6_WireProtection
+single screw terminal block Metz Connect 360273, block size 5x4mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360273.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360273 size 5x4mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360291_1x01_Horizontal_ScrewM3.0_Boxed
+single screw terminal block Metz Connect 360291, block size 9x7.3mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360291.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360291 size 9x7.3mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360322_1x01_Horizontal_ScrewM3.0_WireProtection
+single screw terminal block Metz Connect 360322, block size 6x4mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360322.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360322 size 6x4mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0
+single screw terminal block Metz Connect 360381, block size 5x5mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360381.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360381 size 5x5mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360410_1x01_Horizontal_ScrewM3.0
+single screw terminal block Metz Connect 360410, block size 5x5mm, drill diameter 1.5mm, pad diameter 3mm, https://media.metz-connect.com/files/171/Data_sheet_360410.PDF , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360410 size 5x5mm drill 1.5mm pad 3mm
+0
+2
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_360425_1x01_Horizontal_ScrewM4.0_Boxed
+single screw terminal block Metz Connect 360425, block size 9x9mm, drill diameter 1.6mm, pad diameter 3.2mm, https://www.metz-connect.com/media/file/8a8a80ea6e17c2e6016e3b8ef7cd2d65.de.0/product_summary_u_contact_de_en_fr.pdf , script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT single screw terminal block Metz Connect 360425 size 9x9mm drill 1.6mm pad 3.2mm
+0
+4
+1
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type011_RT05502HBLC_1x02_P5.00mm_Horizontal
+terminal block Metz Connect Type011_RT05502HBLC, 2 pins, pitch 5mm, size 10x10.5mm, drill diameter 1.4mm, pad diameter 2.8mm, https://americancableassemblies.com/content/metz/863188.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type011_RT05502HBLC pitch 5mm size 10x10.5mm drill 1.4mm pad 2.8mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type011_RT05503HBLC_1x03_P5.00mm_Horizontal
+terminal block Metz Connect Type011_RT05503HBLC, 3 pins, pitch 5mm, size 15x10.5mm, drill diameter 1.4mm, pad diameter 2.8mm, https://americancableassemblies.com/content/metz/863188.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type011_RT05503HBLC pitch 5mm size 15x10.5mm drill 1.4mm pad 2.8mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type011_RT05504HBLC_1x04_P5.00mm_Horizontal
+terminal block Metz Connect Type011_RT05504HBLC, 4 pins, pitch 5mm, size 20x10.5mm, drill diameter 1.4mm, pad diameter 2.8mm, https://americancableassemblies.com/content/metz/863188.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type011_RT05504HBLC pitch 5mm size 20x10.5mm drill 1.4mm pad 2.8mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type011_RT05505HBLC_1x05_P5.00mm_Horizontal
+terminal block Metz Connect Type011_RT05505HBLC, 5 pins, pitch 5mm, size 25x10.5mm, drill diameter 1.4mm, pad diameter 2.8mm, https://americancableassemblies.com/content/metz/863188.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type011_RT05505HBLC pitch 5mm size 25x10.5mm drill 1.4mm pad 2.8mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type011_RT05506HBLC_1x06_P5.00mm_Horizontal
+terminal block Metz Connect Type011_RT05506HBLC, 6 pins, pitch 5mm, size 30x10.5mm, drill diameter 1.4mm, pad diameter 2.8mm, https://americancableassemblies.com/content/metz/863188.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type011_RT05506HBLC pitch 5mm size 30x10.5mm drill 1.4mm pad 2.8mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal
+terminal block Metz Connect Type055_RT01502HDWU, 2 pins, pitch 5mm, size 10x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/310551/863212.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type055_RT01502HDWU pitch 5mm size 10x8mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal
+terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 5mm, size 15x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/310551/863212.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 15x8mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type055_RT01504HDWU_1x04_P5.00mm_Horizontal
+terminal block Metz Connect Type055_RT01504HDWU, 4 pins, pitch 5mm, size 20x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/310551/863212.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type055_RT01504HDWU pitch 5mm size 20x8mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal
+terminal block Metz Connect Type059_RT06302HBWC, 2 pins, pitch 3.5mm, size 7x6.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.metz-connect.com/externalfiles/310591/863246.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type059_RT06302HBWC pitch 3.5mm size 7x6.5mm drill 1.2mm pad 2.3mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type059_RT06303HBWC_1x03_P3.50mm_Horizontal
+terminal block Metz Connect Type059_RT06303HBWC, 3 pins, pitch 3.5mm, size 10.5x6.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.metz-connect.com/externalfiles/310591/863246.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type059_RT06303HBWC pitch 3.5mm size 10.5x6.5mm drill 1.2mm pad 2.3mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type059_RT06304HBWC_1x04_P3.50mm_Horizontal
+terminal block Metz Connect Type059_RT06304HBWC, 4 pins, pitch 3.5mm, size 14x6.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.metz-connect.com/externalfiles/310591/863246.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type059_RT06304HBWC pitch 3.5mm size 14x6.5mm drill 1.2mm pad 2.3mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type059_RT06305HBWC_1x05_P3.50mm_Horizontal
+terminal block Metz Connect Type059_RT06305HBWC, 5 pins, pitch 3.5mm, size 17.5x6.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.metz-connect.com/externalfiles/310591/863246.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type059_RT06305HBWC pitch 3.5mm size 17.5x6.5mm drill 1.2mm pad 2.3mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type059_RT06306HBWC_1x06_P3.50mm_Horizontal
+terminal block Metz Connect Type059_RT06306HBWC, 6 pins, pitch 3.5mm, size 21x6.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.metz-connect.com/externalfiles/310591/863246.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type059_RT06306HBWC pitch 3.5mm size 21x6.5mm drill 1.2mm pad 2.3mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type067_RT01902HDWC_1x02_P10.00mm_Horizontal
+terminal block Metz Connect Type067_RT01902HDWC, 2 pins, pitch 10mm, size 15.8x8.2mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310671/863296.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type067_RT01902HDWC pitch 10mm size 15.8x8.2mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type067_RT01903HDWC_1x03_P10.00mm_Horizontal
+terminal block Metz Connect Type067_RT01903HDWC, 3 pins, pitch 10mm, size 25.8x8.2mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310671/863296.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type067_RT01903HDWC pitch 10mm size 25.8x8.2mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type067_RT01904HDWC_1x04_P10.00mm_Horizontal
+terminal block Metz Connect Type067_RT01904HDWC, 4 pins, pitch 10mm, size 35.8x8.2mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310671/863296.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type067_RT01904HDWC pitch 10mm size 35.8x8.2mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type067_RT01905HDWC_1x05_P10.00mm_Horizontal
+terminal block Metz Connect Type067_RT01905HDWC, 5 pins, pitch 10mm, size 45.8x8.2mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310671/863296.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type067_RT01905HDWC pitch 10mm size 45.8x8.2mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal
+terminal block Metz Connect Type073_RT02602HBLU, 2 pins, pitch 5.08mm, size 10.2x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310731/863336.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type073_RT02602HBLU pitch 5.08mm size 10.2x11mm drill 1.4mm pad 2.6mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type073_RT02603HBLU_1x03_P5.08mm_Horizontal
+terminal block Metz Connect Type073_RT02603HBLU, 3 pins, pitch 5.08mm, size 15.2x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310731/863336.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type073_RT02603HBLU pitch 5.08mm size 15.2x11mm drill 1.4mm pad 2.6mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type086_RT03402HBLC_1x02_P3.81mm_Horizontal
+terminal block Metz Connect Type086_RT03402HBLC, 2 pins, pitch 3.81mm, size 7.51x7.3mm, drill diameter 1.1mm, pad diameter 1.75mm, https://www.metz-connect.com/externalfiles/310861/863404.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type086_RT03402HBLC pitch 3.81mm size 7.51x7.3mm drill 1.1mm pad 1.75mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type086_RT03403HBLC_1x03_P3.81mm_Horizontal
+terminal block Metz Connect Type086_RT03403HBLC, 3 pins, pitch 3.81mm, size 11.3x7.3mm, drill diameter 1.1mm, pad diameter 1.75mm, https://www.metz-connect.com/externalfiles/310861/863404.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type086_RT03403HBLC pitch 3.81mm size 11.3x7.3mm drill 1.1mm pad 1.75mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type086_RT03404HBLC_1x04_P3.81mm_Horizontal
+terminal block Metz Connect Type086_RT03404HBLC, 4 pins, pitch 3.81mm, size 15.1x7.3mm, drill diameter 1.1mm, pad diameter 1.75mm, https://www.metz-connect.com/externalfiles/310861/863404.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type086_RT03404HBLC pitch 3.81mm size 15.1x7.3mm drill 1.1mm pad 1.75mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type086_RT03405HBLC_1x05_P3.81mm_Horizontal
+terminal block Metz Connect Type086_RT03405HBLC, 5 pins, pitch 3.81mm, size 18.9x7.3mm, drill diameter 1.1mm, pad diameter 1.75mm, https://www.metz-connect.com/externalfiles/310861/863404.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type086_RT03405HBLC pitch 3.81mm size 18.9x7.3mm drill 1.1mm pad 1.75mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type086_RT03406HBLC_1x06_P3.81mm_Horizontal
+terminal block Metz Connect Type086_RT03406HBLC, 6 pins, pitch 3.81mm, size 22.8x7.3mm, drill diameter 1.1mm, pad diameter 1.75mm, https://www.metz-connect.com/externalfiles/310861/863404.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type086_RT03406HBLC pitch 3.81mm size 22.8x7.3mm drill 1.1mm pad 1.75mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal
+terminal block Metz Connect Type094_RT03502HBLU, 2 pins, pitch 5mm, size 10x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310941/863441.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type094_RT03502HBLU pitch 5mm size 10x8.3mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal
+terminal block Metz Connect Type094_RT03503HBLU, 3 pins, pitch 5mm, size 15x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310941/863441.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type094_RT03503HBLU pitch 5mm size 15x8.3mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type094_RT03504HBLU_1x04_P5.00mm_Horizontal
+terminal block Metz Connect Type094_RT03504HBLU, 4 pins, pitch 5mm, size 20x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310941/863441.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type094_RT03504HBLU pitch 5mm size 20x8.3mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type094_RT03505HBLU_1x05_P5.00mm_Horizontal
+terminal block Metz Connect Type094_RT03505HBLU, 5 pins, pitch 5mm, size 25x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310941/863441.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type094_RT03505HBLU pitch 5mm size 25x8.3mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type094_RT03506HBLU_1x06_P5.00mm_Horizontal
+terminal block Metz Connect Type094_RT03506HBLU, 6 pins, pitch 5mm, size 30x8.3mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/310941/863441.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type094_RT03506HBLU pitch 5mm size 30x8.3mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal
+terminal block Metz Connect Type101_RT01602HBWC, 2 pins, pitch 5.08mm, size 10.2x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311011/863468.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type101_RT01602HBWC pitch 5.08mm size 10.2x8mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type101_RT01603HBWC_1x03_P5.08mm_Horizontal
+terminal block Metz Connect Type101_RT01603HBWC, 3 pins, pitch 5.08mm, size 15.2x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311011/863468.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type101_RT01603HBWC pitch 5.08mm size 15.2x8mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type101_RT01604HBWC_1x04_P5.08mm_Horizontal
+terminal block Metz Connect Type101_RT01604HBWC, 4 pins, pitch 5.08mm, size 20.3x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311011/863468.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type101_RT01604HBWC pitch 5.08mm size 20.3x8mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type101_RT01605HBWC_1x05_P5.08mm_Horizontal
+terminal block Metz Connect Type101_RT01605HBWC, 5 pins, pitch 5.08mm, size 25.4x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311011/863468.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type101_RT01605HBWC pitch 5.08mm size 25.4x8mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type101_RT01606HBWC_1x06_P5.08mm_Horizontal
+terminal block Metz Connect Type101_RT01606HBWC, 6 pins, pitch 5.08mm, size 30.5x8mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311011/863468.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type101_RT01606HBWC pitch 5.08mm size 30.5x8mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal
+terminal block Metz Connect Type171_RT13702HBWC, 2 pins, pitch 7.5mm, size 15x9mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311711/863695.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type171_RT13702HBWC pitch 7.5mm size 15x9mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type171_RT13703HBWC_1x03_P7.50mm_Horizontal
+terminal block Metz Connect Type171_RT13703HBWC, 3 pins, pitch 7.5mm, size 22.5x9mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311711/863695.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type171_RT13703HBWC pitch 7.5mm size 22.5x9mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type171_RT13704HBWC_1x04_P7.50mm_Horizontal
+terminal block Metz Connect Type171_RT13704HBWC, 4 pins, pitch 7.5mm, size 30x9mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311711/863695.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type171_RT13704HBWC pitch 7.5mm size 30x9mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type171_RT13705HBWC_1x05_P7.50mm_Horizontal
+terminal block Metz Connect Type171_RT13705HBWC, 5 pins, pitch 7.5mm, size 37.5x9mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311711/863695.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type171_RT13705HBWC pitch 7.5mm size 37.5x9mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type171_RT13706HBWC_1x06_P7.50mm_Horizontal
+terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 7.5mm, size 45x9mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/311711/863695.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type171_RT13706HBWC pitch 7.5mm size 45x9mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal
+terminal block Metz Connect Type175_RT02702HBLC, 2 pins, pitch 7.5mm, size 15x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/311751/863710.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type175_RT02702HBLC pitch 7.5mm size 15x11mm drill 1.4mm pad 2.6mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type175_RT02703HBLC_1x03_P7.50mm_Horizontal
+terminal block Metz Connect Type175_RT02703HBLC, 3 pins, pitch 7.5mm, size 22.5x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/311751/863710.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type175_RT02703HBLC pitch 7.5mm size 22.5x11mm drill 1.4mm pad 2.6mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type175_RT02704HBLC_1x04_P7.50mm_Horizontal
+terminal block Metz Connect Type175_RT02704HBLC, 4 pins, pitch 7.5mm, size 30x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/311751/863710.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type175_RT02704HBLC pitch 7.5mm size 30x11mm drill 1.4mm pad 2.6mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type175_RT02705HBLC_1x05_P7.50mm_Horizontal
+terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 7.5mm, size 37.5x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/311751/863710.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type175_RT02705HBLC pitch 7.5mm size 37.5x11mm drill 1.4mm pad 2.6mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type175_RT02706HBLC_1x06_P7.50mm_Horizontal
+terminal block Metz Connect Type175_RT02706HBLC, 6 pins, pitch 7.5mm, size 45x11mm, drill diameter 1.4mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/311751/863710.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type175_RT02706HBLC pitch 7.5mm size 45x11mm drill 1.4mm pad 2.6mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type205_RT04502UBLC_1x02_P5.00mm_45Degree
+terminal block Metz Connect Type205_RT04502UBLC, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 10x12.5mm, drill diameter 1.4mm, pad diameter 2.7mm, https://www.metz-connect.com/externalfiles/312051/863728.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type205_RT04502UBLC 45Degree pitch 5mm size 10x12.5mm drill 1.4mm pad 2.7mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type205_RT04503UBLC_1x03_P5.00mm_45Degree
+terminal block Metz Connect Type205_RT04503UBLC, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 15x12.5mm, drill diameter 1.4mm, pad diameter 2.7mm, https://www.metz-connect.com/externalfiles/312051/863728.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type205_RT04503UBLC 45Degree pitch 5mm size 15x12.5mm drill 1.4mm pad 2.7mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type205_RT04504UBLC_1x04_P5.00mm_45Degree
+terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 20x12.5mm, drill diameter 1.4mm, pad diameter 2.7mm, https://www.metz-connect.com/externalfiles/312051/863728.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type205_RT04504UBLC 45Degree pitch 5mm size 20x12.5mm drill 1.4mm pad 2.7mm
+0
+4
+4
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type205_RT04505UBLC_1x05_P5.00mm_45Degree
+terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 25x12.5mm, drill diameter 1.4mm, pad diameter 2.7mm, https://www.metz-connect.com/externalfiles/312051/863728.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type205_RT04505UBLC 45Degree pitch 5mm size 25x12.5mm drill 1.4mm pad 2.7mm
+0
+5
+5
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type205_RT04506UBLC_1x06_P5.00mm_45Degree
+terminal block Metz Connect Type205_RT04506UBLC, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 30x12.5mm, drill diameter 1.4mm, pad diameter 2.7mm, https://www.metz-connect.com/externalfiles/312051/863728.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type205_RT04506UBLC 45Degree pitch 5mm size 30x12.5mm drill 1.4mm pad 2.7mm
+0
+6
+6
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type701_RT11L02HGLU_1x02_P6.35mm_Horizontal
+terminal block Metz Connect Type701_RT11L02HGLU, 2 pins, pitch 6.35mm, size 12.7x12.5mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/317011/863830.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type701_RT11L02HGLU pitch 6.35mm size 12.7x12.5mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type701_RT11L03HGLU_1x03_P6.35mm_Horizontal
+terminal block Metz Connect Type701_RT11L03HGLU, 3 pins, pitch 6.35mm, size 19x12.5mm, drill diameter 1.3mm, pad diameter 2.5mm, https://www.metz-connect.com/externalfiles/317011/863830.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type701_RT11L03HGLU pitch 6.35mm size 19x12.5mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type703_RT10N02HGLU_1x02_P9.52mm_Horizontal
+terminal block Metz Connect Type703_RT10N02HGLU, 2 pins, pitch 9.52mm, size 19x12.5mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/317031/863835.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type703_RT10N02HGLU pitch 9.52mm size 19x12.5mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_MetzConnect
+TerminalBlock_MetzConnect_Type703_RT10N03HGLU_1x03_P9.52mm_Horizontal
+terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 9.52mm, size 28.6x12.5mm, drill diameter 1.3mm, pad diameter 2.6mm, https://www.metz-connect.com/externalfiles/317031/863835.PDF, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_MetzConnect
+THT terminal block Metz Connect Type703_RT10N03HGLU pitch 9.52mm size 28.6x12.5mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_Philmore
+TerminalBlock_Philmore_TB132_1x02_P5.00mm_Horizontal
+Terminal Block Philmore , 2 pins, pitch 5mm, size 10x10.2mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Philmore
+THT Terminal Block Philmore  pitch 5mm size 10x10.2mm drill 1.2mm pad 2.4mm
+0
+2
+2
+TerminalBlock_Philmore
+TerminalBlock_Philmore_TB133_1x03_P5.00mm_Horizontal
+Terminal Block Philmore , 3 pins, pitch 5mm, size 15x10.2mm, drill diameter 1.2mm, pad diameter 2.4mm, http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Philmore
+THT Terminal Block Philmore  pitch 5mm size 15x10.2mm drill 1.2mm pad 2.4mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-2-5.08, 2 pins, pitch 5.08mm, size 10.2x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-2-5.08 pitch 5.08mm size 10.2x9.8mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-2, 2 pins, pitch 5mm, size 10x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-2 pitch 5mm size 10x9.8mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-3-5.08, 3 pins, pitch 5.08mm, size 15.2x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-3-5.08 pitch 5.08mm size 15.2x9.8mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-3, 3 pins, pitch 5mm, size 15x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-3 pitch 5mm size 15x9.8mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-4-5.08, 4 pins, pitch 5.08mm, size 20.3x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-4-5.08 pitch 5.08mm size 20.3x9.8mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 5mm, size 20x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-4 pitch 5mm size 20x9.8mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 5.08mm, size 25.4x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-5-5.08 pitch 5.08mm size 25.4x9.8mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-5, 5 pins, pitch 5mm, size 25x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-5 pitch 5mm size 25x9.8mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-6-5.08, 6 pins, pitch 5.08mm, size 30.5x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm size 30.5x9.8mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-6, 6 pins, pitch 5mm, size 30x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-6 pitch 5mm size 30x9.8mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-7-5.08_1x07_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-7-5.08, 7 pins, pitch 5.08mm, size 35.6x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 35.6x9.8mm drill 1.3mm pad 2.6mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-7_1x07_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-7, 7 pins, pitch 5mm, size 35x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-7 pitch 5mm size 35x9.8mm drill 1.3mm pad 2.6mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-8-5.08, 8 pins, pitch 5.08mm, size 40.6x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm size 40.6x9.8mm drill 1.3mm pad 2.6mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-8, 8 pins, pitch 5mm, size 40x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 40x9.8mm drill 1.3mm pad 2.6mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-9-5.08_1x09_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-9-5.08, 9 pins, pitch 5.08mm, size 45.7x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 45.7x9.8mm drill 1.3mm pad 2.6mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-9_1x09_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 5mm, size 45x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-9 pitch 5mm size 45x9.8mm drill 1.3mm pad 2.6mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-10-5.08_1x10_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-10-5.08, 10 pins, pitch 5.08mm, size 50.8x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm size 50.8x9.8mm drill 1.3mm pad 2.6mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-10_1x10_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 5mm, size 50x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 50x9.8mm drill 1.3mm pad 2.6mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-11-5.08_1x11_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-11-5.08, 11 pins, pitch 5.08mm, size 55.9x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-11-5.08 pitch 5.08mm size 55.9x9.8mm drill 1.3mm pad 2.6mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-11_1x11_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 5mm, size 55x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-11 pitch 5mm size 55x9.8mm drill 1.3mm pad 2.6mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-12-5.08_1x12_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-12-5.08, 12 pins, pitch 5.08mm, size 61x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-12-5.08 pitch 5.08mm size 61x9.8mm drill 1.3mm pad 2.6mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-12_1x12_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-12, 12 pins, pitch 5mm, size 60x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-12 pitch 5mm size 60x9.8mm drill 1.3mm pad 2.6mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-13-5.08_1x13_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 5.08mm, size 66x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-13-5.08 pitch 5.08mm size 66x9.8mm drill 1.3mm pad 2.6mm
+0
+13
+13
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-13_1x13_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-13, 13 pins, pitch 5mm, size 65x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-13 pitch 5mm size 65x9.8mm drill 1.3mm pad 2.6mm
+0
+13
+13
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-14-5.08_1x14_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-14-5.08, 14 pins, pitch 5.08mm, size 71.1x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-14-5.08 pitch 5.08mm size 71.1x9.8mm drill 1.3mm pad 2.6mm
+0
+14
+14
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-14_1x14_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-14, 14 pins, pitch 5mm, size 70x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-14 pitch 5mm size 70x9.8mm drill 1.3mm pad 2.6mm
+0
+14
+14
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-15-5.08_1x15_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-15-5.08, 15 pins, pitch 5.08mm, size 76.2x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-15-5.08 pitch 5.08mm size 76.2x9.8mm drill 1.3mm pad 2.6mm
+0
+15
+15
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-15_1x15_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 5mm, size 75x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-15 pitch 5mm size 75x9.8mm drill 1.3mm pad 2.6mm
+0
+15
+15
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-16-5.08_1x16_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-16-5.08, 16 pins, pitch 5.08mm, size 81.3x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-16-5.08 pitch 5.08mm size 81.3x9.8mm drill 1.3mm pad 2.6mm
+0
+16
+16
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-1,5-16_1x16_P5.00mm_Horizontal
+Terminal Block Phoenix MKDS-1,5-16, 16 pins, pitch 5mm, size 80x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-1,5-16 pitch 5mm size 80x9.8mm drill 1.3mm pad 2.6mm
+0
+16
+16
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, pitch 5.08mm, size 10.2x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-2-5.08 pitch 5.08mm size 10.2x11.2mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-3-5.08, 3 pins, pitch 5.08mm, size 15.2x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-3-5.08 pitch 5.08mm size 15.2x11.2mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-4-5.08_1x04_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-4-5.08, 4 pins, pitch 5.08mm, size 20.3x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-4-5.08 pitch 5.08mm size 20.3x11.2mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-5-5.08_1x05_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-5-5.08, 5 pins, pitch 5.08mm, size 25.4x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-5-5.08 pitch 5.08mm size 25.4x11.2mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-6-5.08, 6 pins, pitch 5.08mm, size 30.5x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-6-5.08 pitch 5.08mm size 30.5x11.2mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-7-5.08_1x07_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-7-5.08, 7 pins, pitch 5.08mm, size 35.6x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-7-5.08 pitch 5.08mm size 35.6x11.2mm drill 1.3mm pad 2.6mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-8-5.08_1x08_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-8-5.08, 8 pins, pitch 5.08mm, size 40.6x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-8-5.08 pitch 5.08mm size 40.6x11.2mm drill 1.3mm pad 2.6mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-9-5.08_1x09_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-9-5.08, 9 pins, pitch 5.08mm, size 45.7x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-9-5.08 pitch 5.08mm size 45.7x11.2mm drill 1.3mm pad 2.6mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-10-5.08_1x10_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-10-5.08, 10 pins, pitch 5.08mm, size 50.8x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-10-5.08 pitch 5.08mm size 50.8x11.2mm drill 1.3mm pad 2.6mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-11-5.08_1x11_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-11-5.08, 11 pins, pitch 5.08mm, size 55.9x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-11-5.08 pitch 5.08mm size 55.9x11.2mm drill 1.3mm pad 2.6mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-12-5.08_1x12_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-12-5.08, 12 pins, pitch 5.08mm, size 61x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-12-5.08 pitch 5.08mm size 61x11.2mm drill 1.3mm pad 2.6mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-13-5.08_1x13_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-13-5.08, 13 pins, pitch 5.08mm, size 66x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-13-5.08 pitch 5.08mm size 66x11.2mm drill 1.3mm pad 2.6mm
+0
+13
+13
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-14-5.08_1x14_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-14-5.08, 14 pins, pitch 5.08mm, size 71.1x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-14-5.08 pitch 5.08mm size 71.1x11.2mm drill 1.3mm pad 2.6mm
+0
+14
+14
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-15-5.08_1x15_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-15-5.08, 15 pins, pitch 5.08mm, size 76.2x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-15-5.08 pitch 5.08mm size 76.2x11.2mm drill 1.3mm pad 2.6mm
+0
+15
+15
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MKDS-3-16-5.08_1x16_P5.08mm_Horizontal
+Terminal Block Phoenix MKDS-3-16-5.08, 16 pins, pitch 5.08mm, size 81.3x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm size 81.3x11.2mm drill 1.3mm pad 2.6mm
+0
+16
+16
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 2.54mm, size 5.54x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 5.54x6.2mm drill 1.1mm pad 2.2mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 2.54mm, size 8.08x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-3-2.54 pitch 2.54mm size 8.08x6.2mm drill 1.1mm pad 2.2mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-4-2.54, 4 pins, pitch 2.54mm, size 10.6x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-4-2.54 pitch 2.54mm size 10.6x6.2mm drill 1.1mm pad 2.2mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-5-2.54_1x05_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-5-2.54, 5 pins, pitch 2.54mm, size 13.2x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-5-2.54 pitch 2.54mm size 13.2x6.2mm drill 1.1mm pad 2.2mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-6-2.54_1x06_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-6-2.54, 6 pins, pitch 2.54mm, size 15.7x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-6-2.54 pitch 2.54mm size 15.7x6.2mm drill 1.1mm pad 2.2mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-7-2.54_1x07_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-7-2.54, 7 pins, pitch 2.54mm, size 18.2x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-7-2.54 pitch 2.54mm size 18.2x6.2mm drill 1.1mm pad 2.2mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-8-2.54, 8 pins, pitch 2.54mm, size 20.8x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-8-2.54 pitch 2.54mm size 20.8x6.2mm drill 1.1mm pad 2.2mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-9-2.54_1x09_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-9-2.54, 9 pins, pitch 2.54mm, size 23.3x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-9-2.54 pitch 2.54mm size 23.3x6.2mm drill 1.1mm pad 2.2mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-10-2.54_1x10_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-10-2.54, 10 pins, pitch 2.54mm, size 25.9x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-10-2.54 pitch 2.54mm size 25.9x6.2mm drill 1.1mm pad 2.2mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-11-2.54_1x11_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-11-2.54, 11 pins, pitch 2.54mm, size 28.4x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-11-2.54 pitch 2.54mm size 28.4x6.2mm drill 1.1mm pad 2.2mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal
+Terminal Block Phoenix MPT-0,5-12-2.54, 12 pins, pitch 2.54mm, size 30.9x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix MPT-0,5-12-2.54 pitch 2.54mm size 30.9x6.2mm drill 1.1mm pad 2.2mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 3.5mm, size 7x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-2-3.5-H pitch 3.5mm size 7x7.6mm drill 1.2mm pad 2.4mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x9mm drill 1.3mm pad 2.6mm
+0
+2
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm drill 1.2mm pad 2.4mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-3-5.0-H, 3 pins, pitch 5mm, size 15x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-3-5.0-H pitch 5mm size 15x9mm drill 1.3mm pad 2.6mm
+0
+3
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 3.5mm, size 14x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-4-3.5-H pitch 3.5mm size 14x7.6mm drill 1.2mm pad 2.4mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-4-5.0-H, 4 pins, pitch 5mm, size 20x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-4-5.0-H pitch 5mm size 20x9mm drill 1.3mm pad 2.6mm
+0
+4
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-5-3.5-H_1x05_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-5-3.5-H, 5 pins, pitch 3.5mm, size 17.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-5-3.5-H pitch 3.5mm size 17.5x7.6mm drill 1.2mm pad 2.4mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-5-5.0-H, 5 pins, pitch 5mm, size 25x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-5-5.0-H pitch 5mm size 25x9mm drill 1.3mm pad 2.6mm
+0
+5
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-6-3.5-H, 6 pins, pitch 3.5mm, size 21x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-6-3.5-H pitch 3.5mm size 21x7.6mm drill 1.2mm pad 2.4mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-6-5.0-H_1x06_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-6-5.0-H, 6 pins, pitch 5mm, size 30x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-6-5.0-H pitch 5mm size 30x9mm drill 1.3mm pad 2.6mm
+0
+6
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-7-3.5-H_1x07_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-7-3.5-H, 7 pins, pitch 3.5mm, size 24.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-7-3.5-H pitch 3.5mm size 24.5x7.6mm drill 1.2mm pad 2.4mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-7-5.0-H_1x07_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-7-5.0-H, 7 pins, pitch 5mm, size 35x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-7-5.0-H pitch 5mm size 35x9mm drill 1.3mm pad 2.6mm
+0
+7
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-8-3.5-H, 8 pins, pitch 3.5mm, size 28x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-8-3.5-H pitch 3.5mm size 28x7.6mm drill 1.2mm pad 2.4mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-8-5.0-H, 8 pins, pitch 5mm, size 40x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-8-5.0-H pitch 5mm size 40x9mm drill 1.3mm pad 2.6mm
+0
+8
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-9-3.5-H_1x09_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-9-3.5-H, 9 pins, pitch 3.5mm, size 31.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-9-3.5-H pitch 3.5mm size 31.5x7.6mm drill 1.2mm pad 2.4mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-9-5.0-H_1x09_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-9-5.0-H, 9 pins, pitch 5mm, size 45x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-9-5.0-H pitch 5mm size 45x9mm drill 1.3mm pad 2.6mm
+0
+9
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-10-3.5-H_1x10_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-10-3.5-H, 10 pins, pitch 3.5mm, size 35x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-10-3.5-H pitch 3.5mm size 35x7.6mm drill 1.2mm pad 2.4mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-10-5.0-H, 10 pins, pitch 5mm, size 50x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-10-5.0-H pitch 5mm size 50x9mm drill 1.3mm pad 2.6mm
+0
+10
+10
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-11-3.5-H_1x11_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-11-3.5-H, 11 pins, pitch 3.5mm, size 38.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-11-3.5-H pitch 3.5mm size 38.5x7.6mm drill 1.2mm pad 2.4mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-11-5.0-H_1x11_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-11-5.0-H, 11 pins, pitch 5mm, size 55x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-11-5.0-H pitch 5mm size 55x9mm drill 1.3mm pad 2.6mm
+0
+11
+11
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-12-3.5-H_1x12_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-12-3.5-H, 12 pins, pitch 3.5mm, size 42x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-12-3.5-H pitch 3.5mm size 42x7.6mm drill 1.2mm pad 2.4mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-12-5.0-H_1x12_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-12-5.0-H, 12 pins, pitch 5mm, size 60x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-12-5.0-H pitch 5mm size 60x9mm drill 1.3mm pad 2.6mm
+0
+12
+12
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-13-3.5-H_1x13_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-13-3.5-H, 13 pins, pitch 3.5mm, size 45.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-13-3.5-H pitch 3.5mm size 45.5x7.6mm drill 1.2mm pad 2.4mm
+0
+13
+13
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-13-5.0-H_1x13_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-13-5.0-H, 13 pins, pitch 5mm, size 65x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-13-5.0-H pitch 5mm size 65x9mm drill 1.3mm pad 2.6mm
+0
+13
+13
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-14-3.5-H_1x14_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-14-3.5-H, 14 pins, pitch 3.5mm, size 49x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-14-3.5-H pitch 3.5mm size 49x7.6mm drill 1.2mm pad 2.4mm
+0
+14
+14
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-14-5.0-H_1x14_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-14-5.0-H, 14 pins, pitch 5mm, size 70x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-14-5.0-H pitch 5mm size 70x9mm drill 1.3mm pad 2.6mm
+0
+14
+14
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-15-3.5-H_1x15_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 3.5mm, size 52.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-15-3.5-H pitch 3.5mm size 52.5x7.6mm drill 1.2mm pad 2.4mm
+0
+15
+15
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-15-5.0-H_1x15_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-15-5.0-H, 15 pins, pitch 5mm, size 75x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-15-5.0-H pitch 5mm size 75x9mm drill 1.3mm pad 2.6mm
+0
+15
+15
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-16-3.5-H_1x16_P3.50mm_Horizontal
+Terminal Block Phoenix PT-1,5-16-3.5-H, 16 pins, pitch 3.5mm, size 56x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-16-3.5-H pitch 3.5mm size 56x7.6mm drill 1.2mm pad 2.4mm
+0
+16
+16
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PT-1,5-16-5.0-H_1x16_P5.00mm_Horizontal
+Terminal Block Phoenix PT-1,5-16-5.0-H, 16 pins, pitch 5mm, size 80x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PT-1,5-16-5.0-H pitch 5mm size 80x9mm drill 1.3mm pad 2.6mm
+0
+16
+16
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-2-2,5-V-SMD_1x02-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 2 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814702/pdf
+PhoenixContact PTSM0.5 2 2.5mm vertical SMD spring clamp terminal block connector 
+0
+4
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-2-2.5-H-THR_1x02_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR, 2 pins, pitch 2.5mm, size 7.2x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR pitch 2.5mm size 7.2x10mm drill 1.2mm pad 3mm
+0
+4
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-2-2.5-V-THR_1x02_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 2 pins, pitch 2.5mm, size 5.5x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR vertical pitch 2.5mm size 5.5x5mm drill 1.2mm pad 2mm
+0
+4
+2
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-2-HV-2.5-SMD_1x02-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 2 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778696/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+4
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-3-2,5-V-SMD_1x03-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 3 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814715/pdf
+PhoenixContact PTSM0.5 3 2.5mm vertical SMD spring clamp terminal block connector 
+0
+5
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-3-2.5-H-THR_1x03_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR, 3 pins, pitch 2.5mm, size 9.7x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR pitch 2.5mm size 9.7x10mm drill 1.2mm pad 3mm
+0
+6
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-3-2.5-V-THR_1x03_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR, vertical (cable from top), 3 pins, pitch 2.5mm, size 8x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR vertical pitch 2.5mm size 8x5mm drill 1.2mm pad 2mm
+0
+6
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-3-HV-2.5-SMD_1x03-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 3 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778706/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+5
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-4-2,5-V-SMD_1x04-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 4 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814728/pdf
+PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block connector 
+0
+6
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-4-2.5-H-THR_1x04_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR, 4 pins, pitch 2.5mm, size 12.2x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR pitch 2.5mm size 12.2x10mm drill 1.2mm pad 3mm
+0
+8
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-4-2.5-V-THR_1x04_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 4 pins, pitch 2.5mm, size 10.5x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR vertical pitch 2.5mm size 10.5x5mm drill 1.2mm pad 2mm
+0
+8
+4
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-4-HV-2.5-SMD_1x04-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 4 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778719/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+4
+3
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-5-2,5-V-SMD_1x05-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 5 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814731/pdf
+PhoenixContact PTSM0.5 5 2.5mm vertical SMD spring clamp terminal block connector 
+0
+7
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-5-2.5-H-THR_1x05_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR, 5 pins, pitch 2.5mm, size 14.7x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR pitch 2.5mm size 14.7x10mm drill 1.2mm pad 3mm
+0
+10
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-5-2.5-V-THR_1x05_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR, vertical (cable from top), 5 pins, pitch 2.5mm, size 13x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR vertical pitch 2.5mm size 13x5mm drill 1.2mm pad 2mm
+0
+10
+5
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-5-HV-2.5-SMD_1x05-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 5 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778722/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+7
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-6-2,5-V-SMD_1x06-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 6 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814744/pdf
+PhoenixContact PTSM0.5 6 2.5mm vertical SMD spring clamp terminal block connector 
+0
+8
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-6-2.5-H-THR_1x06_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR, 6 pins, pitch 2.5mm, size 17.2x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR pitch 2.5mm size 17.2x10mm drill 1.2mm pad 3mm
+0
+12
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-6-2.5-V-THR_1x06_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-6-2.5-V-THR, vertical (cable from top), 6 pins, pitch 2.5mm, size 15.5x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-6-2.5-V-THR vertical pitch 2.5mm size 15.5x5mm drill 1.2mm pad 2mm
+0
+12
+6
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-6-HV-2.5-SMD_1x06-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 6 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778735/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+8
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-7-2,5-V-SMD_1x07-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 7 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814757/pdf
+PhoenixContact PTSM0.5 7 2.5mm vertical SMD spring clamp terminal block connector 
+0
+9
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-7-2.5-H-THR_1x07_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR, 7 pins, pitch 2.5mm, size 19.7x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR pitch 2.5mm size 19.7x10mm drill 1.2mm pad 3mm
+0
+14
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-7-2.5-V-THR_1x07_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR, vertical (cable from top), 7 pins, pitch 2.5mm, size 18x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR vertical pitch 2.5mm size 18x5mm drill 1.2mm pad 2mm
+0
+14
+7
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-7-HV-2.5-SMD_1x07-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 7 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778748/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+9
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-8-2,5-V-SMD_1x08-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 8 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814760/pdf
+PhoenixContact PTSM0.5 8 2.5mm vertical SMD spring clamp terminal block connector 
+0
+10
+9
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-8-2.5-H-THR_1x08_P2.50mm_Horizontal
+Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR, 8 pins, pitch 2.5mm, size 22.2x10mm, drill diameter 1.2mm, pad diameter 3mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR pitch 2.5mm size 22.2x10mm drill 1.2mm pad 3mm
+0
+16
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-8-2.5-V-THR_1x08_P2.50mm_Vertical
+Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 8 pins, pitch 2.5mm, size 20.5x5mm, drill diameter 1.2mm, pad diameter 2mm, http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_Phoenix
+THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 2.5mm size 20.5x5mm drill 1.2mm pad 2mm
+0
+16
+8
+TerminalBlock_Phoenix
+TerminalBlock_Phoenix_PTSM-0,5-8-HV-2.5-SMD_1x08-1MP_P2.50mm_Vertical
+PhoenixContact PTSM0,5 8 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778751/pdf
+2.5mm vertical SMD spring clamp terminal block connector 
+0
+10
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal
+terminal block RND 205-00001, 2 pins, pitch 5mm, size 10x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00001 pitch 5mm size 10x9mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal
+terminal block RND 205-00002, 3 pins, pitch 5mm, size 15x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00002 pitch 5mm size 15x9mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00003_1x04_P5.00mm_Horizontal
+terminal block RND 205-00003, 4 pins, pitch 5mm, size 20x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00003 pitch 5mm size 20x9mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00004_1x05_P5.00mm_Horizontal
+terminal block RND 205-00004, 5 pins, pitch 5mm, size 25x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00004 pitch 5mm size 25x9mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00005_1x06_P5.00mm_Horizontal
+terminal block RND 205-00005, 6 pins, pitch 5mm, size 30x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00005 pitch 5mm size 30x9mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00006_1x07_P5.00mm_Horizontal
+terminal block RND 205-00006, 7 pins, pitch 5mm, size 35x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00006 pitch 5mm size 35x9mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00007_1x08_P5.00mm_Horizontal
+terminal block RND 205-00007, 8 pins, pitch 5mm, size 40x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00007 pitch 5mm size 40x9mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00008_1x09_P5.00mm_Horizontal
+terminal block RND 205-00008, 9 pins, pitch 5mm, size 45x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00008 pitch 5mm size 45x9mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00009_1x10_P5.00mm_Horizontal
+terminal block RND 205-00009, 10 pins, pitch 5mm, size 50x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00009 pitch 5mm size 50x9mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00010_1x11_P5.00mm_Horizontal
+terminal block RND 205-00010, 11 pins, pitch 5mm, size 55x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00010 pitch 5mm size 55x9mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00011_1x12_P5.00mm_Horizontal
+terminal block RND 205-00011, 12 pins, pitch 5mm, size 60x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00011 pitch 5mm size 60x9mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00012_1x02_P5.00mm_Horizontal
+terminal block RND 205-00012, 2 pins, pitch 5mm, size 10x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00012 pitch 5mm size 10x7.6mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00013_1x03_P5.00mm_Horizontal
+terminal block RND 205-00013, 3 pins, pitch 5mm, size 15x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00013 pitch 5mm size 15x7.6mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00014_1x04_P5.00mm_Horizontal
+terminal block RND 205-00014, 4 pins, pitch 5mm, size 20x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00014 pitch 5mm size 20x7.6mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00015_1x05_P5.00mm_Horizontal
+terminal block RND 205-00015, 5 pins, pitch 5mm, size 25x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00015 pitch 5mm size 25x7.6mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00016_1x06_P5.00mm_Horizontal
+terminal block RND 205-00016, 6 pins, pitch 5mm, size 30x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00016 pitch 5mm size 30x7.6mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00017_1x07_P5.00mm_Horizontal
+terminal block RND 205-00017, 7 pins, pitch 5mm, size 35x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00017 pitch 5mm size 35x7.6mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00018_1x08_P5.00mm_Horizontal
+terminal block RND 205-00018, 8 pins, pitch 5mm, size 40x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00018 pitch 5mm size 40x7.6mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00019_1x09_P5.00mm_Horizontal
+terminal block RND 205-00019, 9 pins, pitch 5mm, size 45x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00019 pitch 5mm size 45x7.6mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00020_1x10_P5.00mm_Horizontal
+terminal block RND 205-00020, 10 pins, pitch 5mm, size 50x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00020 pitch 5mm size 50x7.6mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00021_1x11_P5.00mm_Horizontal
+terminal block RND 205-00021, 11 pins, pitch 5mm, size 55x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00021 pitch 5mm size 55x7.6mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00022_1x12_P5.00mm_Horizontal
+terminal block RND 205-00022, 12 pins, pitch 5mm, size 60x7.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00022 pitch 5mm size 60x7.6mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00023_1x02_P10.00mm_Horizontal
+terminal block RND 205-00023, 2 pins, pitch 10mm, size 15x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00023 pitch 10mm size 15x9mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00024_1x03_P10.00mm_Horizontal
+terminal block RND 205-00024, 3 pins, pitch 10mm, size 25x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00024 pitch 10mm size 25x9mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00025_1x04_P10.00mm_Horizontal
+terminal block RND 205-00025, 4 pins, pitch 10mm, size 35x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00025 pitch 10mm size 35x9mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00026_1x05_P10.00mm_Horizontal
+terminal block RND 205-00026, 5 pins, pitch 10mm, size 45x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00026 pitch 10mm size 45x9mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00027_1x06_P10.00mm_Horizontal
+terminal block RND 205-00027, 6 pins, pitch 10mm, size 55x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00027 pitch 10mm size 55x9mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00028_1x07_P10.00mm_Horizontal
+terminal block RND 205-00028, 7 pins, pitch 10mm, size 65x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00028 pitch 10mm size 65x9mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00029_1x08_P10.00mm_Horizontal
+terminal block RND 205-00029, 8 pins, pitch 10mm, size 75x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00029 pitch 10mm size 75x9mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00030_1x09_P10.00mm_Horizontal
+terminal block RND 205-00030, 9 pins, pitch 10mm, size 85x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00030 pitch 10mm size 85x9mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00031_1x10_P10.00mm_Horizontal
+terminal block RND 205-00031, 10 pins, pitch 10mm, size 95x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00031 pitch 10mm size 95x9mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00032_1x11_P10.00mm_Horizontal
+terminal block RND 205-00032, 11 pins, pitch 10mm, size 105x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00032 pitch 10mm size 105x9mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00033_1x12_P10.00mm_Horizontal
+terminal block RND 205-00033, 12 pins, pitch 10mm, size 115x9mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00033 pitch 10mm size 115x9mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal
+terminal block RND 205-00045, 2 pins, pitch 5mm, size 10x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00045 pitch 5mm size 10x8.1mm drill 1.1mm pad 2.1mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal
+terminal block RND 205-00046, 3 pins, pitch 5mm, size 15x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00046 pitch 5mm size 15x8.1mm drill 1.1mm pad 2.1mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00047_1x04_P5.00mm_Horizontal
+terminal block RND 205-00047, 4 pins, pitch 5mm, size 20x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00047 pitch 5mm size 20x8.1mm drill 1.1mm pad 2.1mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00048_1x05_P5.00mm_Horizontal
+terminal block RND 205-00048, 5 pins, pitch 5mm, size 25x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00048 pitch 5mm size 25x8.1mm drill 1.1mm pad 2.1mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00049_1x06_P5.00mm_Horizontal
+terminal block RND 205-00049, 6 pins, pitch 5mm, size 30x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00049 pitch 5mm size 30x8.1mm drill 1.1mm pad 2.1mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00050_1x07_P5.00mm_Horizontal
+terminal block RND 205-00050, 7 pins, pitch 5mm, size 35x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00050 pitch 5mm size 35x8.1mm drill 1.1mm pad 2.1mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00051_1x08_P5.00mm_Horizontal
+terminal block RND 205-00051, 8 pins, pitch 5mm, size 40x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00051 pitch 5mm size 40x8.1mm drill 1.1mm pad 2.1mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00052_1x09_P5.00mm_Horizontal
+terminal block RND 205-00052, 9 pins, pitch 5mm, size 45x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00052 pitch 5mm size 45x8.1mm drill 1.1mm pad 2.1mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00053_1x10_P5.00mm_Horizontal
+terminal block RND 205-00053, 10 pins, pitch 5mm, size 50x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00053 pitch 5mm size 50x8.1mm drill 1.1mm pad 2.1mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00054_1x11_P5.00mm_Horizontal
+terminal block RND 205-00054, 11 pins, pitch 5mm, size 55x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00054 pitch 5mm size 55x8.1mm drill 1.1mm pad 2.1mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00055_1x12_P5.00mm_Horizontal
+terminal block RND 205-00055, 12 pins, pitch 5mm, size 60x8.1mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00055 pitch 5mm size 60x8.1mm drill 1.1mm pad 2.1mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00056_1x02_P5.00mm_45Degree
+terminal block RND 205-00056, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 10x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00056 45Degree pitch 5mm size 10x12.6mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00057_1x03_P5.00mm_45Degree
+terminal block RND 205-00057, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 15x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00057 45Degree pitch 5mm size 15x12.6mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00058_1x04_P5.00mm_45Degree
+terminal block RND 205-00058, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 20x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00058 45Degree pitch 5mm size 20x12.6mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00059_1x05_P5.00mm_45Degree
+terminal block RND 205-00059, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 25x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00059 45Degree pitch 5mm size 25x12.6mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00060_1x06_P5.00mm_45Degree
+terminal block RND 205-00060, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 30x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00060 45Degree pitch 5mm size 30x12.6mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00061_1x07_P5.00mm_45Degree
+terminal block RND 205-00061, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 35x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00061 45Degree pitch 5mm size 35x12.6mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00062_1x08_P5.00mm_45Degree
+terminal block RND 205-00062, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 40x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00062 45Degree pitch 5mm size 40x12.6mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00063_1x09_P5.00mm_45Degree
+terminal block RND 205-00063, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 45x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00063 45Degree pitch 5mm size 45x12.6mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00064_1x10_P5.00mm_45Degree
+terminal block RND 205-00064, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 50x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00064 45Degree pitch 5mm size 50x12.6mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00065_1x11_P5.00mm_45Degree
+terminal block RND 205-00065, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 55x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00065 45Degree pitch 5mm size 55x12.6mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00066_1x12_P5.00mm_45Degree
+terminal block RND 205-00066, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 60x12.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00066 45Degree pitch 5mm size 60x12.6mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00067_1x02_P7.50mm_Horizontal
+terminal block RND 205-00067, 2 pins, pitch 7.5mm, size 15x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00067 pitch 7.5mm size 15x10.3mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00068_1x03_P7.50mm_Horizontal
+terminal block RND 205-00068, 3 pins, pitch 7.5mm, size 22.5x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00068 pitch 7.5mm size 22.5x10.3mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00069_1x04_P7.50mm_Horizontal
+terminal block RND 205-00069, 4 pins, pitch 7.5mm, size 30x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00069 pitch 7.5mm size 30x10.3mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00070_1x05_P7.50mm_Horizontal
+terminal block RND 205-00070, 5 pins, pitch 7.5mm, size 37.5x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00070 pitch 7.5mm size 37.5x10.3mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00071_1x06_P7.50mm_Horizontal
+terminal block RND 205-00071, 6 pins, pitch 7.5mm, size 45x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00071 pitch 7.5mm size 45x10.3mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00072_1x07_P7.50mm_Horizontal
+terminal block RND 205-00072, 7 pins, pitch 7.5mm, size 52.5x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00072 pitch 7.5mm size 52.5x10.3mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00073_1x08_P7.50mm_Horizontal
+terminal block RND 205-00073, 8 pins, pitch 7.5mm, size 60x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00073 pitch 7.5mm size 60x10.3mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00074_1x09_P7.50mm_Horizontal
+terminal block RND 205-00074, 9 pins, pitch 7.5mm, size 67.5x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00074 pitch 7.5mm size 67.5x10.3mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00075_1x10_P7.50mm_Horizontal
+terminal block RND 205-00075, 10 pins, pitch 7.5mm, size 75x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00075 pitch 7.5mm size 75x10.3mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00076_1x11_P7.50mm_Horizontal
+terminal block RND 205-00076, 11 pins, pitch 7.5mm, size 82.5x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00076 pitch 7.5mm size 82.5x10.3mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00077_1x12_P7.50mm_Horizontal
+terminal block RND 205-00077, 12 pins, pitch 7.5mm, size 90x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00077 pitch 7.5mm size 90x10.3mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00078_1x02_P10.00mm_Horizontal
+terminal block RND 205-00078, 2 pins, pitch 10mm, size 15x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00078 pitch 10mm size 15x10.3mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00079_1x03_P10.00mm_Horizontal
+terminal block RND 205-00079, 3 pins, pitch 10mm, size 25x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00079 pitch 10mm size 25x10.3mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00080_1x04_P10.00mm_Horizontal
+terminal block RND 205-00080, 4 pins, pitch 10mm, size 35x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00080 pitch 10mm size 35x10.3mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00081_1x05_P10.00mm_Horizontal
+terminal block RND 205-00081, 5 pins, pitch 10mm, size 45x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00081 pitch 10mm size 45x10.3mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00082_1x06_P10.00mm_Horizontal
+terminal block RND 205-00082, 6 pins, pitch 10mm, size 55x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00082 pitch 10mm size 55x10.3mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00083_1x07_P10.00mm_Horizontal
+terminal block RND 205-00083, 7 pins, pitch 10mm, size 65x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00083 pitch 10mm size 65x10.3mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00084_1x08_P10.00mm_Horizontal
+terminal block RND 205-00084, 8 pins, pitch 10mm, size 75x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00084 pitch 10mm size 75x10.3mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00085_1x09_P10.00mm_Horizontal
+terminal block RND 205-00085, 9 pins, pitch 10mm, size 85x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00085 pitch 10mm size 85x10.3mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00086_1x10_P10.00mm_Horizontal
+terminal block RND 205-00086, 10 pins, pitch 10mm, size 95x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00086 pitch 10mm size 95x10.3mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00087_1x11_P10.00mm_Horizontal
+terminal block RND 205-00087, 11 pins, pitch 10mm, size 105x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00087 pitch 10mm size 105x10.3mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00088_1x12_P10.00mm_Horizontal
+terminal block RND 205-00088, 12 pins, pitch 10mm, size 115x10.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00088 pitch 10mm size 115x10.3mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00232_1x02_P5.08mm_Horizontal
+terminal block RND 205-00232, 2 pins, pitch 5.08mm, size 10.2x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00232 pitch 5.08mm size 10.2x8.45mm drill 1.1mm pad 2.1mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00233_1x03_P5.08mm_Horizontal
+terminal block RND 205-00233, 3 pins, pitch 5.08mm, size 15.2x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00233 pitch 5.08mm size 15.2x8.45mm drill 1.1mm pad 2.1mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00234_1x04_P5.08mm_Horizontal
+terminal block RND 205-00234, 4 pins, pitch 5.08mm, size 20.3x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00234 pitch 5.08mm size 20.3x8.45mm drill 1.1mm pad 2.1mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00235_1x05_P5.08mm_Horizontal
+terminal block RND 205-00235, 5 pins, pitch 5.08mm, size 25.4x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00235 pitch 5.08mm size 25.4x8.45mm drill 1.1mm pad 2.1mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00236_1x06_P5.08mm_Horizontal
+terminal block RND 205-00236, 6 pins, pitch 5.08mm, size 30.5x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00236 pitch 5.08mm size 30.5x8.45mm drill 1.1mm pad 2.1mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00237_1x07_P5.08mm_Horizontal
+terminal block RND 205-00237, 7 pins, pitch 5.08mm, size 35.6x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00237 pitch 5.08mm size 35.6x8.45mm drill 1.1mm pad 2.1mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00238_1x08_P5.08mm_Horizontal
+terminal block RND 205-00238, 8 pins, pitch 5.08mm, size 40.6x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00238 pitch 5.08mm size 40.6x8.45mm drill 1.1mm pad 2.1mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00239_1x09_P5.08mm_Horizontal
+terminal block RND 205-00239, 9 pins, pitch 5.08mm, size 45.7x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00239 pitch 5.08mm size 45.7x8.45mm drill 1.1mm pad 2.1mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00240_1x10_P5.08mm_Horizontal
+terminal block RND 205-00240, 10 pins, pitch 5.08mm, size 50.8x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00240 pitch 5.08mm size 50.8x8.45mm drill 1.1mm pad 2.1mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00241_1x02_P10.16mm_Horizontal
+terminal block RND 205-00241, 2 pins, pitch 10.2mm, size 15.2x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00241 pitch 10.2mm size 15.2x8.3mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00241_1x11_P5.08mm_Horizontal
+terminal block RND 205-00241, 11 pins, pitch 5.08mm, size 55.9x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00241 pitch 5.08mm size 55.9x8.45mm drill 1.1mm pad 2.1mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00242_1x03_P10.16mm_Horizontal
+terminal block RND 205-00242, 3 pins, pitch 10.2mm, size 25.4x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00242 pitch 10.2mm size 25.4x8.3mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00242_1x12_P5.08mm_Horizontal
+terminal block RND 205-00242, 12 pins, pitch 5.08mm, size 61x8.45mm, drill diameter 1.1mm, pad diameter 2.1mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00242 pitch 5.08mm size 61x8.45mm drill 1.1mm pad 2.1mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00243_1x04_P10.16mm_Horizontal
+terminal block RND 205-00243, 4 pins, pitch 10.2mm, size 35.6x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00243 pitch 10.2mm size 35.6x8.3mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00244_1x05_P10.16mm_Horizontal
+terminal block RND 205-00244, 5 pins, pitch 10.2mm, size 45.7x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00244 pitch 10.2mm size 45.7x8.3mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00245_1x06_P10.16mm_Horizontal
+terminal block RND 205-00245, 6 pins, pitch 10.2mm, size 55.9x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00245 pitch 10.2mm size 55.9x8.3mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00246_1x07_P10.16mm_Horizontal
+terminal block RND 205-00246, 7 pins, pitch 10.2mm, size 66x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00246 pitch 10.2mm size 66x8.3mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00247_1x08_P10.16mm_Horizontal
+terminal block RND 205-00247, 8 pins, pitch 10.2mm, size 76.2x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00247 pitch 10.2mm size 76.2x8.3mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00248_1x09_P10.16mm_Horizontal
+terminal block RND 205-00248, 9 pins, pitch 10.2mm, size 86.4x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00248 pitch 10.2mm size 86.4x8.3mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00249_1x10_P10.16mm_Horizontal
+terminal block RND 205-00249, 10 pins, pitch 10.2mm, size 96.5x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00249 pitch 10.2mm size 96.5x8.3mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00250_1x11_P10.16mm_Horizontal
+terminal block RND 205-00250, 11 pins, pitch 10.2mm, size 107x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00250 pitch 10.2mm size 107x8.3mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00251_1x12_P10.16mm_Horizontal
+terminal block RND 205-00251, 12 pins, pitch 10.2mm, size 117x8.3mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00251 pitch 10.2mm size 117x8.3mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical
+terminal block RND 205-00078, vertical (cable from top), 2 pins, pitch 5mm, size 10x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00078 vertical pitch 5mm size 10x10mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00277_1x03_P5.00mm_Vertical
+terminal block RND 205-00079, vertical (cable from top), 3 pins, pitch 5mm, size 15x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00079 vertical pitch 5mm size 15x10mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00278_1x04_P5.00mm_Vertical
+terminal block RND 205-00080, vertical (cable from top), 4 pins, pitch 5mm, size 20x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00080 vertical pitch 5mm size 20x10mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00279_1x05_P5.00mm_Vertical
+terminal block RND 205-00081, vertical (cable from top), 5 pins, pitch 5mm, size 25x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00081 vertical pitch 5mm size 25x10mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00280_1x06_P5.00mm_Vertical
+terminal block RND 205-00082, vertical (cable from top), 6 pins, pitch 5mm, size 30x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00082 vertical pitch 5mm size 30x10mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00281_1x07_P5.00mm_Vertical
+terminal block RND 205-00083, vertical (cable from top), 7 pins, pitch 5mm, size 35x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00083 vertical pitch 5mm size 35x10mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00282_1x08_P5.00mm_Vertical
+terminal block RND 205-00084, vertical (cable from top), 8 pins, pitch 5mm, size 40x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00084 vertical pitch 5mm size 40x10mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00283_1x09_P5.00mm_Vertical
+terminal block RND 205-00085, vertical (cable from top), 9 pins, pitch 5mm, size 45x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00085 vertical pitch 5mm size 45x10mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00284_1x10_P5.00mm_Vertical
+terminal block RND 205-00086, vertical (cable from top), 10 pins, pitch 5mm, size 50x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00086 vertical pitch 5mm size 50x10mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00285_1x11_P5.00mm_Vertical
+terminal block RND 205-00087, vertical (cable from top), 11 pins, pitch 5mm, size 55x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00087 vertical pitch 5mm size 55x10mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00286_1x12_P5.00mm_Vertical
+terminal block RND 205-00088, vertical (cable from top), 12 pins, pitch 5mm, size 60x10mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00088 vertical pitch 5mm size 60x10mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal
+terminal block RND 205-00287, 2 pins, pitch 5.08mm, size 10.2x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00287 pitch 5.08mm size 10.2x10.6mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00288_1x03_P5.08mm_Horizontal
+terminal block RND 205-00288, 3 pins, pitch 5.08mm, size 15.2x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00288 pitch 5.08mm size 15.2x10.6mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00289_1x04_P5.08mm_Horizontal
+terminal block RND 205-00289, 4 pins, pitch 5.08mm, size 20.3x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00289 pitch 5.08mm size 20.3x10.6mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00290_1x05_P5.08mm_Horizontal
+terminal block RND 205-00290, 5 pins, pitch 5.08mm, size 25.4x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00290 pitch 5.08mm size 25.4x10.6mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00291_1x06_P5.08mm_Horizontal
+terminal block RND 205-00291, 6 pins, pitch 5.08mm, size 30.5x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00291 pitch 5.08mm size 30.5x10.6mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00292_1x07_P5.08mm_Horizontal
+terminal block RND 205-00292, 7 pins, pitch 5.08mm, size 35.6x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00292 pitch 5.08mm size 35.6x10.6mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00293_1x08_P5.08mm_Horizontal
+terminal block RND 205-00293, 8 pins, pitch 5.08mm, size 40.6x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00293 pitch 5.08mm size 40.6x10.6mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00294_1x09_P5.08mm_Horizontal
+terminal block RND 205-00294, 9 pins, pitch 5.08mm, size 45.7x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00294 pitch 5.08mm size 45.7x10.6mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00295_1x10_P5.08mm_Horizontal
+terminal block RND 205-00295, 10 pins, pitch 5.08mm, size 50.8x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00295 pitch 5.08mm size 50.8x10.6mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00296_1x11_P5.08mm_Horizontal
+terminal block RND 205-00296, 11 pins, pitch 5.08mm, size 55.9x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00296 pitch 5.08mm size 55.9x10.6mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00297_1x12_P5.08mm_Horizontal
+terminal block RND 205-00297, 12 pins, pitch 5.08mm, size 61x10.6mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00297 pitch 5.08mm size 61x10.6mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_RND
+TerminalBlock_RND_205-00298_1x02_P10.00mm_Horizontal
+terminal block RND 205-00298, 2 pins, pitch 10mm, size 15x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00298 pitch 10mm size 15x8.1mm drill 1.3mm pad 2.5mm
+0
+2
+2
+TerminalBlock_RND
+TerminalBlock_RND_205-00299_1x03_P10.00mm_Horizontal
+terminal block RND 205-00299, 3 pins, pitch 10mm, size 25x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00299 pitch 10mm size 25x8.1mm drill 1.3mm pad 2.5mm
+0
+3
+3
+TerminalBlock_RND
+TerminalBlock_RND_205-00300_1x04_P10.00mm_Horizontal
+terminal block RND 205-00300, 4 pins, pitch 10mm, size 35x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00300 pitch 10mm size 35x8.1mm drill 1.3mm pad 2.5mm
+0
+4
+4
+TerminalBlock_RND
+TerminalBlock_RND_205-00301_1x05_P10.00mm_Horizontal
+terminal block RND 205-00301, 5 pins, pitch 10mm, size 45x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00301 pitch 10mm size 45x8.1mm drill 1.3mm pad 2.5mm
+0
+5
+5
+TerminalBlock_RND
+TerminalBlock_RND_205-00302_1x06_P10.00mm_Horizontal
+terminal block RND 205-00302, 6 pins, pitch 10mm, size 55x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00302 pitch 10mm size 55x8.1mm drill 1.3mm pad 2.5mm
+0
+6
+6
+TerminalBlock_RND
+TerminalBlock_RND_205-00303_1x07_P10.00mm_Horizontal
+terminal block RND 205-00303, 7 pins, pitch 10mm, size 65x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00303 pitch 10mm size 65x8.1mm drill 1.3mm pad 2.5mm
+0
+7
+7
+TerminalBlock_RND
+TerminalBlock_RND_205-00304_1x08_P10.00mm_Horizontal
+terminal block RND 205-00304, 8 pins, pitch 10mm, size 75x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00304 pitch 10mm size 75x8.1mm drill 1.3mm pad 2.5mm
+0
+8
+8
+TerminalBlock_RND
+TerminalBlock_RND_205-00305_1x09_P10.00mm_Horizontal
+terminal block RND 205-00305, 9 pins, pitch 10mm, size 85x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00305 pitch 10mm size 85x8.1mm drill 1.3mm pad 2.5mm
+0
+9
+9
+TerminalBlock_RND
+TerminalBlock_RND_205-00306_1x10_P10.00mm_Horizontal
+terminal block RND 205-00306, 10 pins, pitch 10mm, size 95x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00306 pitch 10mm size 95x8.1mm drill 1.3mm pad 2.5mm
+0
+10
+10
+TerminalBlock_RND
+TerminalBlock_RND_205-00307_1x11_P10.00mm_Horizontal
+terminal block RND 205-00307, 11 pins, pitch 10mm, size 105x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00307 pitch 10mm size 105x8.1mm drill 1.3mm pad 2.5mm
+0
+11
+11
+TerminalBlock_RND
+TerminalBlock_RND_205-00308_1x12_P10.00mm_Horizontal
+terminal block RND 205-00308, 12 pins, pitch 10mm, size 115x8.1mm, drill diameter 1.3mm, pad diameter 2.5mm, http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_RND
+THT terminal block RND 205-00308 pitch 10mm size 115x8.1mm drill 1.3mm pad 2.5mm
+0
+12
+12
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_1-282834-0_1x10_P2.54mm_Horizontal
+Terminal Block TE 1-282834-0, 10 pins, pitch 2.54mm, size 25.9x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 1-282834-0 pitch 2.54mm size 25.9x6.5mm drill 1.1mm pad 2.1mm
+0
+10
+10
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_1-282834-1_1x11_P2.54mm_Horizontal
+Terminal Block TE 1-282834-1, 11 pins, pitch 2.54mm, size 28.4x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 1-282834-1 pitch 2.54mm size 28.4x6.5mm drill 1.1mm pad 2.1mm
+0
+11
+11
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_1-282834-2_1x12_P2.54mm_Horizontal
+Terminal Block TE 1-282834-2, 12 pins, pitch 2.54mm, size 30.9x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 1-282834-2 pitch 2.54mm size 30.9x6.5mm drill 1.1mm pad 2.1mm
+0
+12
+12
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal
+Terminal Block TE 282834-2, 2 pins, pitch 2.54mm, size 5.54x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-2 pitch 2.54mm size 5.54x6.5mm drill 1.1mm pad 2.1mm
+0
+2
+2
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal
+Terminal Block TE 282834-3, 3 pins, pitch 2.54mm, size 8.08x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-3 pitch 2.54mm size 8.08x6.5mm drill 1.1mm pad 2.1mm
+0
+3
+3
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal
+Terminal Block TE 282834-4, 4 pins, pitch 2.54mm, size 10.6x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-4 pitch 2.54mm size 10.6x6.5mm drill 1.1mm pad 2.1mm
+0
+4
+4
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-5_1x05_P2.54mm_Horizontal
+Terminal Block TE 282834-5, 5 pins, pitch 2.54mm, size 13.2x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-5 pitch 2.54mm size 13.2x6.5mm drill 1.1mm pad 2.1mm
+0
+5
+5
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-6_1x06_P2.54mm_Horizontal
+Terminal Block TE 282834-6, 6 pins, pitch 2.54mm, size 15.7x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-6 pitch 2.54mm size 15.7x6.5mm drill 1.1mm pad 2.1mm
+0
+6
+6
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-7_1x07_P2.54mm_Horizontal
+Terminal Block TE 282834-7, 7 pins, pitch 2.54mm, size 18.2x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-7 pitch 2.54mm size 18.2x6.5mm drill 1.1mm pad 2.1mm
+0
+7
+7
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-8_1x08_P2.54mm_Horizontal
+Terminal Block TE 282834-8, 8 pins, pitch 2.54mm, size 20.8x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-8 pitch 2.54mm size 20.8x6.5mm drill 1.1mm pad 2.1mm
+0
+8
+8
+TerminalBlock_TE-Connectivity
+TerminalBlock_TE_282834-9_1x09_P2.54mm_Horizontal
+Terminal Block TE 282834-9, 9 pins, pitch 2.54mm, size 23.3x6.5mm, drill diameter 1.1mm, pad diameter 2.1mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity
+THT Terminal Block TE 282834-9 pitch 2.54mm size 23.3x6.5mm drill 1.1mm pad 2.1mm
+0
+9
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-502_2x02_P2.54mm
+Terminal Block Wago 233-502, 2 pins, pitch 2.54 mm,  https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-502
+THT
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-503_2x03_P2.54mm
+Terminal Block Wago 233-503, 3 pins, pitch 2.54 mm,  https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-503
+THT
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-504_2x04_P2.54mm
+Terminal Block Wago 233-504, 4 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-504
+THT
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-505_2x05_P2.54mm
+Terminal Block Wago 233-505, 5 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-505
+THT
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-506_2x06_P2.54mm
+Terminal Block Wago 233-506, 6 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-506
+THT
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-507_2x07_P2.54mm
+Terminal Block Wago 233-507, 7 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-507
+THT
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-508_2x08_P2.54mm
+Terminal Block Wago 233-508, 8 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-508
+THT
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-509_2x09_P2.54mm
+Terminal Block Wago 233-509, 9 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-509
+THT
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-510_2x10_P2.54mm
+Terminal Block Wago 233-510, 10 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-510
+THT
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_233-512_2x12_P2.54mm
+Terminal Block Wago 233-512, 12 pins, pitch 2.54 mm, https://www.wago.com/de/leiterplattenanschluss/klemmenleiste-fuer-leiterplatten/p/233-512
+THT
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-101_1x01_P5.00mm_45Degree
+Terminal Block WAGO 236-101, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 7.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-101 45Degree pitch 5mm size 7.3x14mm drill 1.15mm pad 3mm
+0
+1
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree
+Terminal Block WAGO 236-102, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 12.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-102 45Degree pitch 5mm size 12.3x14mm drill 1.15mm pad 3mm
+0
+2
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree
+Terminal Block WAGO 236-103, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 17.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-103 45Degree pitch 5mm size 17.3x14mm drill 1.15mm pad 3mm
+0
+3
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-104_1x04_P5.00mm_45Degree
+Terminal Block WAGO 236-104, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 22.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-104 45Degree pitch 5mm size 22.3x14mm drill 1.15mm pad 3mm
+0
+4
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-105_1x05_P5.00mm_45Degree
+Terminal Block WAGO 236-105, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 27.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-105 45Degree pitch 5mm size 27.3x14mm drill 1.15mm pad 3mm
+0
+5
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-106_1x06_P5.00mm_45Degree
+Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-106 45Degree pitch 5mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+6
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-107_1x07_P5.00mm_45Degree
+Terminal Block WAGO 236-107, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 37.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-107 45Degree pitch 5mm size 37.3x14mm drill 1.15mm pad 3mm
+0
+7
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-108_1x08_P5.00mm_45Degree
+Terminal Block WAGO 236-108, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 42.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-108 45Degree pitch 5mm size 42.3x14mm drill 1.15mm pad 3mm
+0
+8
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-109_1x09_P5.00mm_45Degree
+Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 47.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-109 45Degree pitch 5mm size 47.3x14mm drill 1.15mm pad 3mm
+0
+9
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-110_1x10_P5.00mm_45Degree
+Terminal Block WAGO 236-110, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 52.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-110 45Degree pitch 5mm size 52.3x14mm drill 1.15mm pad 3mm
+0
+10
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-111_1x11_P5.00mm_45Degree
+Terminal Block WAGO 236-111, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 57.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-111 45Degree pitch 5mm size 57.3x14mm drill 1.15mm pad 3mm
+0
+11
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-112_1x12_P5.00mm_45Degree
+Terminal Block WAGO 236-112, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-112 45Degree pitch 5mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+12
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-113_1x13_P5.00mm_45Degree
+Terminal Block WAGO 236-113, 45Degree (cable under 45degree), 13 pins, pitch 5mm, size 67.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-113 45Degree pitch 5mm size 67.3x14mm drill 1.15mm pad 3mm
+0
+13
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-114_1x14_P5.00mm_45Degree
+Terminal Block WAGO 236-114, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 72.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-114 45Degree pitch 5mm size 72.3x14mm drill 1.15mm pad 3mm
+0
+14
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-115_1x15_P5.00mm_45Degree
+Terminal Block WAGO 236-115, 45Degree (cable under 45degree), 15 pins, pitch 5mm, size 77.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-115 45Degree pitch 5mm size 77.3x14mm drill 1.15mm pad 3mm
+0
+15
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-116_1x16_P5.00mm_45Degree
+Terminal Block WAGO 236-116, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 82.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-116 45Degree pitch 5mm size 82.3x14mm drill 1.15mm pad 3mm
+0
+16
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-124_1x24_P5.00mm_45Degree
+Terminal Block WAGO 236-124, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-124 45Degree pitch 5mm size 122x14mm drill 1.15mm pad 3mm
+0
+24
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-136_1x36_P5.00mm_45Degree
+Terminal Block WAGO 236-136, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 182x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-136 45Degree pitch 5mm size 182x14mm drill 1.15mm pad 3mm
+0
+36
+36
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-148_1x48_P5.00mm_45Degree
+Terminal Block WAGO 236-148, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 242x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-148 45Degree pitch 5mm size 242x14mm drill 1.15mm pad 3mm
+0
+48
+48
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-201_1x01_P7.50mm_45Degree
+Terminal Block WAGO 236-201, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 9.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-201 45Degree pitch 7.5mm size 9.8x14mm drill 1.15mm pad 3mm
+0
+1
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-202_1x02_P7.50mm_45Degree
+Terminal Block WAGO 236-202, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 17.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-202 45Degree pitch 7.5mm size 17.3x14mm drill 1.15mm pad 3mm
+0
+2
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-203_1x03_P7.50mm_45Degree
+Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 24.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-203 45Degree pitch 7.5mm size 24.8x14mm drill 1.15mm pad 3mm
+0
+3
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-204_1x04_P7.50mm_45Degree
+Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-204 45Degree pitch 7.5mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+4
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-205_1x05_P7.50mm_45Degree
+Terminal Block WAGO 236-205, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 39.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-205 45Degree pitch 7.5mm size 39.8x14mm drill 1.15mm pad 3mm
+0
+5
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-206_1x06_P7.50mm_45Degree
+Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 47.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-206 45Degree pitch 7.5mm size 47.3x14mm drill 1.15mm pad 3mm
+0
+6
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-207_1x07_P7.50mm_45Degree
+Terminal Block WAGO 236-207, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 54.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-207 45Degree pitch 7.5mm size 54.8x14mm drill 1.15mm pad 3mm
+0
+7
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-208_1x08_P7.50mm_45Degree
+Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-208 45Degree pitch 7.5mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+8
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-209_1x09_P7.50mm_45Degree
+Terminal Block WAGO 236-209, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 69.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-209 45Degree pitch 7.5mm size 69.8x14mm drill 1.15mm pad 3mm
+0
+9
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-210_1x10_P7.50mm_45Degree
+Terminal Block WAGO 236-210, 45Degree (cable under 45degree), 10 pins, pitch 7.5mm, size 77.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-210 45Degree pitch 7.5mm size 77.3x14mm drill 1.15mm pad 3mm
+0
+10
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-211_1x11_P7.50mm_45Degree
+Terminal Block WAGO 236-211, 45Degree (cable under 45degree), 11 pins, pitch 7.5mm, size 84.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-211 45Degree pitch 7.5mm size 84.8x14mm drill 1.15mm pad 3mm
+0
+11
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-212_1x12_P7.50mm_45Degree
+Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 92.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-212 45Degree pitch 7.5mm size 92.3x14mm drill 1.15mm pad 3mm
+0
+12
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-213_1x13_P7.50mm_45Degree
+Terminal Block WAGO 236-213, 45Degree (cable under 45degree), 13 pins, pitch 7.5mm, size 99.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-213 45Degree pitch 7.5mm size 99.8x14mm drill 1.15mm pad 3mm
+0
+13
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-214_1x14_P7.50mm_45Degree
+Terminal Block WAGO 236-214, 45Degree (cable under 45degree), 14 pins, pitch 7.5mm, size 107x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-214 45Degree pitch 7.5mm size 107x14mm drill 1.15mm pad 3mm
+0
+14
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-215_1x15_P7.50mm_45Degree
+Terminal Block WAGO 236-215, 45Degree (cable under 45degree), 15 pins, pitch 7.5mm, size 115x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-215 45Degree pitch 7.5mm size 115x14mm drill 1.15mm pad 3mm
+0
+15
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-216_1x16_P7.50mm_45Degree
+Terminal Block WAGO 236-216, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-216 45Degree pitch 7.5mm size 122x14mm drill 1.15mm pad 3mm
+0
+16
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-224_1x24_P7.50mm_45Degree
+Terminal Block WAGO 236-224, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 182x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-224 45Degree pitch 7.5mm size 182x14mm drill 1.15mm pad 3mm
+0
+24
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-301_1x01_P10.00mm_45Degree
+Terminal Block WAGO 236-301, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 12.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-301 45Degree pitch 10mm size 12.3x14mm drill 1.15mm pad 3mm
+0
+1
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-302_1x02_P10.00mm_45Degree
+Terminal Block WAGO 236-302, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 22.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-302 45Degree pitch 10mm size 22.3x14mm drill 1.15mm pad 3mm
+0
+2
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-303_1x03_P10.00mm_45Degree
+Terminal Block WAGO 236-303, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-303 45Degree pitch 10mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+3
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-304_1x04_P10.00mm_45Degree
+Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 4 pins, pitch 10mm, size 42.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-304 45Degree pitch 10mm size 42.3x14mm drill 1.15mm pad 3mm
+0
+4
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-305_1x05_P10.00mm_45Degree
+Terminal Block WAGO 236-305, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 52.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-305 45Degree pitch 10mm size 52.3x14mm drill 1.15mm pad 3mm
+0
+5
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-306_1x06_P10.00mm_45Degree
+Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 6 pins, pitch 10mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-306 45Degree pitch 10mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+6
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-307_1x07_P10.00mm_45Degree
+Terminal Block WAGO 236-307, 45Degree (cable under 45degree), 7 pins, pitch 10mm, size 72.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-307 45Degree pitch 10mm size 72.3x14mm drill 1.15mm pad 3mm
+0
+7
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-308_1x08_P10.00mm_45Degree
+Terminal Block WAGO 236-308, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 82.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-308 45Degree pitch 10mm size 82.3x14mm drill 1.15mm pad 3mm
+0
+8
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-309_1x09_P10.00mm_45Degree
+Terminal Block WAGO 236-309, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 92.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-309 45Degree pitch 10mm size 92.3x14mm drill 1.15mm pad 3mm
+0
+9
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-310_1x10_P10.00mm_45Degree
+Terminal Block WAGO 236-310, 45Degree (cable under 45degree), 10 pins, pitch 10mm, size 102x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-310 45Degree pitch 10mm size 102x14mm drill 1.15mm pad 3mm
+0
+10
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-311_1x11_P10.00mm_45Degree
+Terminal Block WAGO 236-311, 45Degree (cable under 45degree), 11 pins, pitch 10mm, size 112x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-311 45Degree pitch 10mm size 112x14mm drill 1.15mm pad 3mm
+0
+11
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-312_1x12_P10.00mm_45Degree
+Terminal Block WAGO 236-312, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-312 45Degree pitch 10mm size 122x14mm drill 1.15mm pad 3mm
+0
+12
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-313_1x13_P10.00mm_45Degree
+Terminal Block WAGO 236-313, 45Degree (cable under 45degree), 13 pins, pitch 10mm, size 132x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-313 45Degree pitch 10mm size 132x14mm drill 1.15mm pad 3mm
+0
+13
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-314_1x14_P10.00mm_45Degree
+Terminal Block WAGO 236-314, 45Degree (cable under 45degree), 14 pins, pitch 10mm, size 142x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-314 45Degree pitch 10mm size 142x14mm drill 1.15mm pad 3mm
+0
+14
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-315_1x15_P10.00mm_45Degree
+Terminal Block WAGO 236-315, 45Degree (cable under 45degree), 15 pins, pitch 10mm, size 152x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-315 45Degree pitch 10mm size 152x14mm drill 1.15mm pad 3mm
+0
+15
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-316_1x16_P10.00mm_45Degree
+Terminal Block WAGO 236-316, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 162x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-316 45Degree pitch 10mm size 162x14mm drill 1.15mm pad 3mm
+0
+16
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-324_1x24_P10.00mm_45Degree
+Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 242x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-324 45Degree pitch 10mm size 242x14mm drill 1.15mm pad 3mm
+0
+24
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-401_1x01_P5.00mm_45Degree
+Terminal Block WAGO 236-401, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 7.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-401 45Degree pitch 5mm size 7.3x14mm drill 1.15mm pad 3mm
+0
+2
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree
+Terminal Block WAGO 236-402, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 12.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-402 45Degree pitch 5mm size 12.3x14mm drill 1.15mm pad 3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree
+Terminal Block WAGO 236-403, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 17.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-403 45Degree pitch 5mm size 17.3x14mm drill 1.15mm pad 3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-404_1x04_P5.00mm_45Degree
+Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 22.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-404 45Degree pitch 5mm size 22.3x14mm drill 1.15mm pad 3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-405_1x05_P5.00mm_45Degree
+Terminal Block WAGO 236-405, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 27.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-405 45Degree pitch 5mm size 27.3x14mm drill 1.15mm pad 3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-406_1x06_P5.00mm_45Degree
+Terminal Block WAGO 236-406, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-406 45Degree pitch 5mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-407_1x07_P5.00mm_45Degree
+Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 37.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-407 45Degree pitch 5mm size 37.3x14mm drill 1.15mm pad 3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-408_1x08_P5.00mm_45Degree
+Terminal Block WAGO 236-408, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 42.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-408 45Degree pitch 5mm size 42.3x14mm drill 1.15mm pad 3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-409_1x09_P5.00mm_45Degree
+Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 47.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-409 45Degree pitch 5mm size 47.3x14mm drill 1.15mm pad 3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-410_1x10_P5.00mm_45Degree
+Terminal Block WAGO 236-410, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 52.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-410 45Degree pitch 5mm size 52.3x14mm drill 1.15mm pad 3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-411_1x11_P5.00mm_45Degree
+Terminal Block WAGO 236-411, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 57.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-411 45Degree pitch 5mm size 57.3x14mm drill 1.15mm pad 3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-412_1x12_P5.00mm_45Degree
+Terminal Block WAGO 236-412, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-412 45Degree pitch 5mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-413_1x13_P5.00mm_45Degree
+Terminal Block WAGO 236-413, 45Degree (cable under 45degree), 13 pins, pitch 5mm, size 67.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-413 45Degree pitch 5mm size 67.3x14mm drill 1.15mm pad 3mm
+0
+26
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-414_1x14_P5.00mm_45Degree
+Terminal Block WAGO 236-414, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 72.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-414 45Degree pitch 5mm size 72.3x14mm drill 1.15mm pad 3mm
+0
+28
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-415_1x15_P5.00mm_45Degree
+Terminal Block WAGO 236-415, 45Degree (cable under 45degree), 15 pins, pitch 5mm, size 77.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-415 45Degree pitch 5mm size 77.3x14mm drill 1.15mm pad 3mm
+0
+30
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-416_1x16_P5.00mm_45Degree
+Terminal Block WAGO 236-416, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 82.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-416 45Degree pitch 5mm size 82.3x14mm drill 1.15mm pad 3mm
+0
+32
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-424_1x24_P5.00mm_45Degree
+Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-424 45Degree pitch 5mm size 122x14mm drill 1.15mm pad 3mm
+0
+48
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-436_1x36_P5.00mm_45Degree
+Terminal Block WAGO 236-436, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 182x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-436 45Degree pitch 5mm size 182x14mm drill 1.15mm pad 3mm
+0
+72
+36
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-448_1x48_P5.00mm_45Degree
+Terminal Block WAGO 236-448, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 242x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-448 45Degree pitch 5mm size 242x14mm drill 1.15mm pad 3mm
+0
+96
+48
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-501_1x01_P7.50mm_45Degree
+Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 9.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-501 45Degree pitch 7.5mm size 9.8x14mm drill 1.15mm pad 3mm
+0
+2
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-502_1x02_P7.50mm_45Degree
+Terminal Block WAGO 236-502, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 17.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-502 45Degree pitch 7.5mm size 17.3x14mm drill 1.15mm pad 3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-503_1x03_P7.50mm_45Degree
+Terminal Block WAGO 236-503, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 24.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-503 45Degree pitch 7.5mm size 24.8x14mm drill 1.15mm pad 3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-504_1x04_P7.50mm_45Degree
+Terminal Block WAGO 236-504, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-504 45Degree pitch 7.5mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-505_1x05_P7.50mm_45Degree
+Terminal Block WAGO 236-505, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 39.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-505 45Degree pitch 7.5mm size 39.8x14mm drill 1.15mm pad 3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-506_1x06_P7.50mm_45Degree
+Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 47.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-506 45Degree pitch 7.5mm size 47.3x14mm drill 1.15mm pad 3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-507_1x07_P7.50mm_45Degree
+Terminal Block WAGO 236-507, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 54.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-507 45Degree pitch 7.5mm size 54.8x14mm drill 1.15mm pad 3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-508_1x08_P7.50mm_45Degree
+Terminal Block WAGO 236-508, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-508 45Degree pitch 7.5mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-509_1x09_P7.50mm_45Degree
+Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 69.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-509 45Degree pitch 7.5mm size 69.8x14mm drill 1.15mm pad 3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-510_1x10_P7.50mm_45Degree
+Terminal Block WAGO 236-510, 45Degree (cable under 45degree), 10 pins, pitch 7.5mm, size 77.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-510 45Degree pitch 7.5mm size 77.3x14mm drill 1.15mm pad 3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-511_1x11_P7.50mm_45Degree
+Terminal Block WAGO 236-511, 45Degree (cable under 45degree), 11 pins, pitch 7.5mm, size 84.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-511 45Degree pitch 7.5mm size 84.8x14mm drill 1.15mm pad 3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-512_1x12_P7.50mm_45Degree
+Terminal Block WAGO 236-512, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 92.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-512 45Degree pitch 7.5mm size 92.3x14mm drill 1.15mm pad 3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-513_1x13_P7.50mm_45Degree
+Terminal Block WAGO 236-513, 45Degree (cable under 45degree), 13 pins, pitch 7.5mm, size 99.8x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-513 45Degree pitch 7.5mm size 99.8x14mm drill 1.15mm pad 3mm
+0
+26
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-514_1x14_P7.50mm_45Degree
+Terminal Block WAGO 236-514, 45Degree (cable under 45degree), 14 pins, pitch 7.5mm, size 107x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-514 45Degree pitch 7.5mm size 107x14mm drill 1.15mm pad 3mm
+0
+28
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-515_1x15_P7.50mm_45Degree
+Terminal Block WAGO 236-515, 45Degree (cable under 45degree), 15 pins, pitch 7.5mm, size 115x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-515 45Degree pitch 7.5mm size 115x14mm drill 1.15mm pad 3mm
+0
+30
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-516_1x16_P7.50mm_45Degree
+Terminal Block WAGO 236-516, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-516 45Degree pitch 7.5mm size 122x14mm drill 1.15mm pad 3mm
+0
+32
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-524_1x24_P7.50mm_45Degree
+Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 182x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-524 45Degree pitch 7.5mm size 182x14mm drill 1.15mm pad 3mm
+0
+48
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-601_1x01_P10.00mm_45Degree
+Terminal Block WAGO 236-601, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 12.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-601 45Degree pitch 10mm size 12.3x14mm drill 1.15mm pad 3mm
+0
+2
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-602_1x02_P10.00mm_45Degree
+Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 22.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-602 45Degree pitch 10mm size 22.3x14mm drill 1.15mm pad 3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-603_1x03_P10.00mm_45Degree
+Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size 32.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-603 45Degree pitch 10mm size 32.3x14mm drill 1.15mm pad 3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-604_1x04_P10.00mm_45Degree
+Terminal Block WAGO 236-604, 45Degree (cable under 45degree), 4 pins, pitch 10mm, size 42.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-604 45Degree pitch 10mm size 42.3x14mm drill 1.15mm pad 3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-605_1x05_P10.00mm_45Degree
+Terminal Block WAGO 236-605, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 52.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-605 45Degree pitch 10mm size 52.3x14mm drill 1.15mm pad 3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-606_1x06_P10.00mm_45Degree
+Terminal Block WAGO 236-606, 45Degree (cable under 45degree), 6 pins, pitch 10mm, size 62.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-606 45Degree pitch 10mm size 62.3x14mm drill 1.15mm pad 3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-607_1x07_P10.00mm_45Degree
+Terminal Block WAGO 236-607, 45Degree (cable under 45degree), 7 pins, pitch 10mm, size 72.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-607 45Degree pitch 10mm size 72.3x14mm drill 1.15mm pad 3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-608_1x08_P10.00mm_45Degree
+Terminal Block WAGO 236-608, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 82.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-608 45Degree pitch 10mm size 82.3x14mm drill 1.15mm pad 3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-609_1x09_P10.00mm_45Degree
+Terminal Block WAGO 236-609, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 92.3x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-609 45Degree pitch 10mm size 92.3x14mm drill 1.15mm pad 3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-610_1x10_P10.00mm_45Degree
+Terminal Block WAGO 236-610, 45Degree (cable under 45degree), 10 pins, pitch 10mm, size 102x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-610 45Degree pitch 10mm size 102x14mm drill 1.15mm pad 3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-611_1x11_P10.00mm_45Degree
+Terminal Block WAGO 236-611, 45Degree (cable under 45degree), 11 pins, pitch 10mm, size 112x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-611 45Degree pitch 10mm size 112x14mm drill 1.15mm pad 3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-612_1x12_P10.00mm_45Degree
+Terminal Block WAGO 236-612, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 122x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-612 45Degree pitch 10mm size 122x14mm drill 1.15mm pad 3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-613_1x13_P10.00mm_45Degree
+Terminal Block WAGO 236-613, 45Degree (cable under 45degree), 13 pins, pitch 10mm, size 132x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-613 45Degree pitch 10mm size 132x14mm drill 1.15mm pad 3mm
+0
+26
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-614_1x14_P10.00mm_45Degree
+Terminal Block WAGO 236-614, 45Degree (cable under 45degree), 14 pins, pitch 10mm, size 142x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-614 45Degree pitch 10mm size 142x14mm drill 1.15mm pad 3mm
+0
+28
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-615_1x15_P10.00mm_45Degree
+Terminal Block WAGO 236-615, 45Degree (cable under 45degree), 15 pins, pitch 10mm, size 152x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-615 45Degree pitch 10mm size 152x14mm drill 1.15mm pad 3mm
+0
+30
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-616_1x16_P10.00mm_45Degree
+Terminal Block WAGO 236-616, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 162x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-616 45Degree pitch 10mm size 162x14mm drill 1.15mm pad 3mm
+0
+32
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_236-624_1x24_P10.00mm_45Degree
+Terminal Block WAGO 236-624, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 242x14mm, drill diameter 1.15mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 236-624 45Degree pitch 10mm size 242x14mm drill 1.15mm pad 3mm
+0
+48
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-101_1x01_P5.00mm_45Degree
+Terminal Block WAGO 804-101, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 6.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-101 45Degree pitch 5mm size 6.5x15mm drill 1.2mm pad 3mm
+0
+2
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-102_1x02_P5.00mm_45Degree
+Terminal Block WAGO 804-102, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 11.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-102 45Degree pitch 5mm size 11.5x15mm drill 1.2mm pad 3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-103_1x03_P5.00mm_45Degree
+Terminal Block WAGO 804-103, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 16.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-103 45Degree pitch 5mm size 16.5x15mm drill 1.2mm pad 3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-104_1x04_P5.00mm_45Degree
+Terminal Block WAGO 804-104, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 21.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-104 45Degree pitch 5mm size 21.5x15mm drill 1.2mm pad 3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-105_1x05_P5.00mm_45Degree
+Terminal Block WAGO 804-105, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 26.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-105 45Degree pitch 5mm size 26.5x15mm drill 1.2mm pad 3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-106_1x06_P5.00mm_45Degree
+Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 31.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-106 45Degree pitch 5mm size 31.5x15mm drill 1.2mm pad 3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-107_1x07_P5.00mm_45Degree
+Terminal Block WAGO 804-107, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 36.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-107 45Degree pitch 5mm size 36.5x15mm drill 1.2mm pad 3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-108_1x08_P5.00mm_45Degree
+Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 41.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-108 45Degree pitch 5mm size 41.5x15mm drill 1.2mm pad 3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-109_1x09_P5.00mm_45Degree
+Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 46.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-109 45Degree pitch 5mm size 46.5x15mm drill 1.2mm pad 3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-110_1x10_P5.00mm_45Degree
+Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 51.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-110 45Degree pitch 5mm size 51.5x15mm drill 1.2mm pad 3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-111_1x11_P5.00mm_45Degree
+Terminal Block WAGO 804-111, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 56.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-111 45Degree pitch 5mm size 56.5x15mm drill 1.2mm pad 3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-112_1x12_P5.00mm_45Degree
+Terminal Block WAGO 804-112, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 61.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-112 45Degree pitch 5mm size 61.5x15mm drill 1.2mm pad 3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-113_1x13_P5.00mm_45Degree
+Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 13 pins, pitch 5mm, size 66.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-113 45Degree pitch 5mm size 66.5x15mm drill 1.2mm pad 3mm
+0
+26
+13
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-114_1x14_P5.00mm_45Degree
+Terminal Block WAGO 804-114, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 71.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-114 45Degree pitch 5mm size 71.5x15mm drill 1.2mm pad 3mm
+0
+28
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-115_1x15_P5.00mm_45Degree
+Terminal Block WAGO 804-115, 45Degree (cable under 45degree), 15 pins, pitch 5mm, size 76.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-115 45Degree pitch 5mm size 76.5x15mm drill 1.2mm pad 3mm
+0
+30
+15
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-116_1x16_P5.00mm_45Degree
+Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 81.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-116 45Degree pitch 5mm size 81.5x15mm drill 1.2mm pad 3mm
+0
+32
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-124_1x24_P5.00mm_45Degree
+Terminal Block WAGO 804-124, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-124 45Degree pitch 5mm size 122x15mm drill 1.2mm pad 3mm
+0
+48
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-301_1x01_P7.50mm_45Degree
+Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 6.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-301 45Degree pitch 7.5mm size 6.5x15mm drill 1.2mm pad 3mm
+0
+2
+1
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-302_1x02_P7.50mm_45Degree
+Terminal Block WAGO 804-302, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 14x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-302 45Degree pitch 7.5mm size 14x15mm drill 1.2mm pad 3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-303_1x03_P7.50mm_45Degree
+Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 21.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-303 45Degree pitch 7.5mm size 21.5x15mm drill 1.2mm pad 3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-304_1x04_P7.50mm_45Degree
+Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 29x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-304 45Degree pitch 7.5mm size 29x15mm drill 1.2mm pad 3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-305_1x05_P7.50mm_45Degree
+Terminal Block WAGO 804-305, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 36.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-305 45Degree pitch 7.5mm size 36.5x15mm drill 1.2mm pad 3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-306_1x06_P7.50mm_45Degree
+Terminal Block WAGO 804-306, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 44x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-306 45Degree pitch 7.5mm size 44x15mm drill 1.2mm pad 3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-307_1x07_P7.50mm_45Degree
+Terminal Block WAGO 804-307, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 51.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-307 45Degree pitch 7.5mm size 51.5x15mm drill 1.2mm pad 3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-308_1x08_P7.50mm_45Degree
+Terminal Block WAGO 804-308, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 59x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-308 45Degree pitch 7.5mm size 59x15mm drill 1.2mm pad 3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-309_1x09_P7.50mm_45Degree
+Terminal Block WAGO 804-309, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 66.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-309 45Degree pitch 7.5mm size 66.5x15mm drill 1.2mm pad 3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-310_1x10_P7.50mm_45Degree
+Terminal Block WAGO 804-310, 45Degree (cable under 45degree), 10 pins, pitch 7.5mm, size 74x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-310 45Degree pitch 7.5mm size 74x15mm drill 1.2mm pad 3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-311_1x11_P7.50mm_45Degree
+Terminal Block WAGO 804-311, 45Degree (cable under 45degree), 11 pins, pitch 7.5mm, size 81.5x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-311 45Degree pitch 7.5mm size 81.5x15mm drill 1.2mm pad 3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-312_1x12_P7.50mm_45Degree
+Terminal Block WAGO 804-312, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 89x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-312 45Degree pitch 7.5mm size 89x15mm drill 1.2mm pad 3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-316_1x16_P7.50mm_45Degree
+Terminal Block WAGO 804-316, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 119x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-316 45Degree pitch 7.5mm size 119x15mm drill 1.2mm pad 3mm
+0
+32
+16
+TerminalBlock_WAGO
+TerminalBlock_WAGO_804-324_1x24_P7.50mm_45Degree
+Terminal Block WAGO 804-324, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 179x15mm, drill diameter 1.2mm, pad diameter 3mm, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 804-324 45Degree pitch 7.5mm size 179x15mm drill 1.2mm pad 3mm
+0
+48
+24
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1102_1x02_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1102, 2 pins, pitch 3.5mm, size 8.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1102, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1102 pitch 3.5mm size 8.5x14.5mm drill 1.2mm pad 2.3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1103_1x03_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1103, 3 pins, pitch 3.5mm, size 12x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1103, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1103 pitch 3.5mm size 12x14.5mm drill 1.2mm pad 2.3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1104_1x04_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1104, 4 pins, pitch 3.5mm, size 15.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1104, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1104 pitch 3.5mm size 15.5x14.5mm drill 1.2mm pad 2.3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1105_1x05_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1105, 5 pins, pitch 3.5mm, size 19x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1105, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1105 pitch 3.5mm size 19x14.5mm drill 1.2mm pad 2.3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1106_1x06_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1106, 6 pins, pitch 3.5mm, size 22.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1106, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1106 pitch 3.5mm size 22.5x14.5mm drill 1.2mm pad 2.3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1108_1x08_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1108, 8 pins, pitch 3.5mm, size 29.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1108, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1108 pitch 3.5mm size 29.5x14.5mm drill 1.2mm pad 2.3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1109_1x09_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1109, 9 pins, pitch 3.5mm, size 33x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1109, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1109 pitch 3.5mm size 33x14.5mm drill 1.2mm pad 2.3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1110_1x10_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1110, 10 pins, pitch 3.5mm, size 36.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1110, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1110 pitch 3.5mm size 36.5x14.5mm drill 1.2mm pad 2.3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1111_1x11_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1111, 11 pins, pitch 3.5mm, size 40x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1111, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1111 pitch 3.5mm size 40x14.5mm drill 1.2mm pad 2.3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-1112_1x12_P3.50mm_Horizontal
+Terminal Block WAGO 2601-1112, 12 pins, pitch 3.5mm, size 43.5x14.5mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-1112, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-1112 pitch 3.5mm size 43.5x14.5mm drill 1.2mm pad 2.3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3102_1x02_P3.50mm_Vertical
+Terminal Block WAGO 2601-3102, 2 pins, pitch 3.5mm, size 8.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3102, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3102 pitch 3.5mm size 8.5x12.8mm drill 1.2mm pad 2.3mm
+0
+4
+2
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3103_1x03_P3.50mm_Vertical
+Terminal Block WAGO 2601-3103, 3 pins, pitch 3.5mm, size 12x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3103, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3103 pitch 3.5mm size 12x12.8mm drill 1.2mm pad 2.3mm
+0
+6
+3
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3104_1x04_P3.50mm_Vertical
+Terminal Block WAGO 2601-3104, 4 pins, pitch 3.5mm, size 15.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3104, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3104 pitch 3.5mm size 15.5x12.8mm drill 1.2mm pad 2.3mm
+0
+8
+4
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3105_1x05_P3.50mm_Vertical
+Terminal Block WAGO 2601-3105, 5 pins, pitch 3.5mm, size 19x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3105, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3105 pitch 3.5mm size 19x12.8mm drill 1.2mm pad 2.3mm
+0
+10
+5
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3106_1x06_P3.50mm_Vertical
+Terminal Block WAGO 2601-3106, 6 pins, pitch 3.5mm, size 22.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3106, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3106 pitch 3.5mm size 22.5x12.8mm drill 1.2mm pad 2.3mm
+0
+12
+6
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3107_1x07_P3.50mm_Vertical
+Terminal Block WAGO 2601-3107, 7 pins, pitch 3.5mm, size 26x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3107, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3107 pitch 3.5mm size 26x12.8mm drill 1.2mm pad 2.3mm
+0
+14
+7
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3108_1x08_P3.50mm_Vertical
+Terminal Block WAGO 2601-3108, 8 pins, pitch 3.5mm, size 29.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3108, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3108 pitch 3.5mm size 29.5x12.8mm drill 1.2mm pad 2.3mm
+0
+16
+8
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3109_1x09_P3.50mm_Vertical
+Terminal Block WAGO 2601-3109, 9 pins, pitch 3.5mm, size 33x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3109, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3109 pitch 3.5mm size 33x12.8mm drill 1.2mm pad 2.3mm
+0
+18
+9
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3110_1x10_P3.50mm_Vertical
+Terminal Block WAGO 2601-3110, 10 pins, pitch 3.5mm, size 36.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3110, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3110 pitch 3.5mm size 36.5x12.8mm drill 1.2mm pad 2.3mm
+0
+20
+10
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3111_1x11_P3.50mm_Vertical
+Terminal Block WAGO 2601-3111, 11 pins, pitch 3.5mm, size 40x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3111, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3111 pitch 3.5mm size 40x12.8mm drill 1.2mm pad 2.3mm
+0
+22
+11
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3112_1x12_P3.50mm_Vertical
+Terminal Block WAGO 2601-3112, 12 pins, pitch 3.5mm, size 43.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3112, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3112 pitch 3.5mm size 43.5x12.8mm drill 1.2mm pad 2.3mm
+0
+24
+12
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3114_1x14_P3.50mm_Vertical
+Terminal Block WAGO 2601-3114, 14 pins, pitch 3.5mm, size 50.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3114, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3114 pitch 3.5mm size 50.5x12.8mm drill 1.2mm pad 2.3mm
+0
+28
+14
+TerminalBlock_WAGO
+TerminalBlock_WAGO_2601-3124_1x24_P3.50mm_Vertical
+Terminal Block WAGO 2601-3124, 24 pins, pitch 3.5mm, size 85.5x12.8mm, drill diameter 1.2mm, pad diameter 2.3mm, https://www.wago.com/global/pcb-terminal-blocks-and-pluggable-connectors/pcb-terminal-block/p/2601-3124, script-generated using https://gitlab.com/kicad/libraries/kicad-footprint-generator/-/tree/master/scripts/TerminalBlock_WAGO
+THT Terminal Block WAGO 2601-3124 pitch 3.5mm size 85.5x12.8mm drill 1.2mm pad 2.3mm
+0
+48
+24
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650073_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650073.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650074_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650074.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650094_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650094.pdf)
+screw terminal thread redcube thr power connector
+0
+16
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650173_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650173.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650174_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650174.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650194_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650194.pdf)
+screw terminal thread redcube thr power connector
+0
+18
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74650195_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650195.pdf)
+screw terminal thread redcube thr power connector
+0
+18
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRBU_74655095_THR
+REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74655095.pdf)
+screw terminal thread redcube thr power connector
+0
+16
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRSH_74651173_THR
+REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651173.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRSH_74651174_THR
+REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651174.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRSH_74651175_THR
+REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651175.pdf)
+screw terminal thread redcube thr power connector
+0
+8
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRSH_74651194_THR
+REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651194.pdf)
+screw terminal thread redcube thr power connector
+0
+18
+1
+TerminalBlock_Wuerth
+Wuerth_REDCUBE-THR_WP-THRSH_74651195_THR
+REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651195.pdf)
+screw terminal thread redcube thr power connector
+0
+18
+1
+TestPoint
+TestPoint_2Pads_Pitch2.54mm_Drill0.8mm
+Test point with 2 pins, pitch 2.54mm, drill diameter 0.8mm
+CONN DEV
+0
+2
+2
+TestPoint
+TestPoint_2Pads_Pitch5.08mm_Drill1.3mm
+Test point with 2 pads, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm
+CONN DEV
+0
+2
+2
+TestPoint
+TestPoint_Bridge_Pitch2.0mm_Drill0.7mm
+wire loop as test point, pitch 2.0mm, hole diameter 0.7mm, wire diameter 0.5mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch2.54mm_Drill0.7mm
+wire loop as test point, pitch 2.0mm, hole diameter 0.7mm, wire diameter 0.5mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch2.54mm_Drill1.0mm
+wire loop as test point, pitch 2.54mm, hole diameter 1.0mm, wire diameter 0.8mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch2.54mm_Drill1.3mm
+wire loop as test point, pitch 2.54mm, hole diameter 1.3mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch3.81mm_Drill1.3mm
+wire loop as test point, pitch 3.81mm, hole diameter 1.3mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch5.08mm_Drill0.7mm
+wire loop as test point, pitch 5.08mm, hole diameter 0.7mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch5.08mm_Drill1.3mm
+wire loop as test point, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch6.35mm_Drill1.3mm
+wire loop as test point, pitch 6.35mm, hole diameter 1.3mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Bridge_Pitch7.62mm_Drill1.3mm
+wire loop as test point, pitch 7.62mm, hole diameter 1.3mm, wire diameter 1.0mm
+test point wire loop
+0
+2
+1
+TestPoint
+TestPoint_Keystone_5000-5004_Miniature
+Keystone THM Miniature Test Point 5000-5004, http://www.keyelco.com/product-pdf.cfm?p=1309
+Through Hole Mount Test Points
+0
+1
+1
+TestPoint
+TestPoint_Keystone_5005-5009_Compact
+Keystone THM Compact Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314
+Through Hole Mount Test Points
+0
+1
+1
+TestPoint
+TestPoint_Keystone_5010-5014_Multipurpose
+Keystone THM Multipurpose Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319
+Through Hole Mount Test Points
+0
+1
+1
+TestPoint
+TestPoint_Keystone_5015_Micro_Mini
+Keystone SMT Micro Mini Test Point 5015, http://www.keyelco.com/product-pdf.cfm?p=1353
+Test Point
+0
+1
+1
+TestPoint
+TestPoint_Keystone_5019_Miniature
+Keystone SMT Miniature Test Point 5019, http://www.keyelco.com/product-pdf.cfm?p=1357
+Test Point
+0
+1
+1
+TestPoint
+TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded
+wire loop with bead as test point, loop diameter 1.8mm, hole diameter 1.0mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.50mm_Drill1.0mm
+wire loop as test point, loop diameter 2.5mm, hole diameter 1.0mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile
+low profile wire loop as test point, loop diameter 2.5mm, hole diameter 1.0mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.50mm_Drill1.85mm
+wire loop as test point, loop diameter 2.5mm, hole diameter 1.85mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded
+wire loop with bead as test point, loop diameter2.548mm, hole diameter 1.5mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded
+wire loop with bead as test point, loop diameter2.6mm, hole diameter 0.9mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded
+wire loop with bead as test point, loop diameter2.6mm, hole diameter 1.4mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded
+wire loop with bead as test point, loop diameter2.6mm, hole diameter 1.6mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D3.50mm_Drill0.9mm_Beaded
+wire loop with bead as test point, loop diameter2.6mm, hole diameter 0.9mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded
+wire loop with bead as test point, loop diameter 3.5mm, hole diameter 1.4mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D3.80mm_Drill2.0mm
+wire loop as test point, loop diameter 3.8mm, hole diameter 2.0mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D3.80mm_Drill2.5mm
+wire loop as test point, loop diameter 3.8mm, hole diameter 2.5mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Loop_D3.80mm_Drill2.8mm
+wire loop as test point, loop diameter 3.8mm, hole diameter 2.8mm
+test point wire loop bead
+0
+1
+1
+TestPoint
+TestPoint_Pad_1.0x1.0mm
+SMD rectangular pad as test Point, square 1.0mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_1.5x1.5mm
+SMD rectangular pad as test Point, square 1.5mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_2.0x2.0mm
+SMD rectangular pad as test Point, square 2.0mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_2.5x2.5mm
+SMD rectangular pad as test Point, square 2.5mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_3.0x3.0mm
+SMD rectangular pad as test Point, square 3.0mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_4.0x4.0mm
+SMD rectangular pad as test Point, square 4.0mm side length
+test point SMD pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_Pad_D1.0mm
+SMD pad as test Point, diameter 1.0mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Pad_D1.5mm
+SMD pad as test Point, diameter 1.5mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Pad_D2.0mm
+SMD pad as test Point, diameter 2.0mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Pad_D2.5mm
+SMD pad as test Point, diameter 2.5mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Pad_D3.0mm
+SMD pad as test Point, diameter 3.0mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Pad_D4.0mm
+SMD pad as test Point, diameter 4.0mm
+test point SMD pad
+0
+1
+1
+TestPoint
+TestPoint_Plated_Hole_D2.0mm
+Plated Hole as test Point, diameter 2.0mm
+test point plated hole
+0
+1
+1
+TestPoint
+TestPoint_Plated_Hole_D3.0mm
+Plated Hole as test Point, diameter 3.0mm
+test point plated hole
+0
+1
+1
+TestPoint
+TestPoint_Plated_Hole_D4.0mm
+Plated Hole as test Point, diameter 4.0mm
+test point plated hole
+0
+1
+1
+TestPoint
+TestPoint_Plated_Hole_D5.0mm
+Plated Hole as test Point, diameter 5.0mm
+test point plated hole
+0
+1
+1
+TestPoint
+TestPoint_THTPad_1.0x1.0mm_Drill0.5mm
+THT rectangular pad as test Point, square 1.0mm side length, hole diameter 0.5mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_1.5x1.5mm_Drill0.7mm
+THT rectangular pad as test Point, square 1.5mm side length, hole diameter 0.7mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_2.0x2.0mm_Drill1.0mm
+THT rectangular pad as test Point, square 2.0mm_Drill1.0mm  side length, hole diameter 1.0mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_2.5x2.5mm_Drill1.2mm
+THT rectangular pad as test Point, square 2.5mm side length, hole diameter 1.2mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_3.0x3.0mm_Drill1.5mm
+THT rectangular pad as test Point, square 3.0mm side length, hole diameter 1.5mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_4.0x4.0mm_Drill2.0mm
+THT rectangular pad as test Point, square 4.0mm  side length, hole diameter 2.0mm
+test point THT pad rectangle square
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D1.0mm_Drill0.5mm
+THT pad as test Point, diameter 1.0mm, hole diameter 0.5mm
+test point THT pad
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D1.5mm_Drill0.7mm
+THT pad as test Point, diameter 1.5mm, hole diameter 0.7mm
+test point THT pad
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D2.0mm_Drill1.0mm
+THT pad as test Point, diameter 2.0mm, hole diameter 1.0mm
+test point THT pad
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D2.5mm_Drill1.2mm
+THT pad as test Point, diameter 2.5mm, hole diameter 1.2mm 
+test point THT pad
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D3.0mm_Drill1.5mm
+THT pad as test Point, diameter 3.0mm, hole diameter 1.5mm
+test point THT pad
+0
+1
+1
+TestPoint
+TestPoint_THTPad_D4.0mm_Drill2.0mm
+THT pad as test Point, diameter 4.0mm, hole diameter 2.0mm
+test point THT pad
+0
+1
+1
+Transformer_SMD
+Pulse_P0926NL
+SMT Gate Drive Transformer, 1:1:1, 8.0x6.3x5.3mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf)
+pulse pa0926nl
+0
+6
+6
+Transformer_SMD
+Pulse_PA1323NL
+SMT Gate Drive Transformer, 1:1, 9.5x7.1x5.3mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf)
+pulse pa1323nl
+0
+6
+6
+Transformer_SMD
+Pulse_PA2001NL
+SMT Gate Drive Transformer, 1:1, 8.6x6.7x2.5mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2001nl pe-68386nl
+0
+4
+4
+Transformer_SMD
+Pulse_PA2002NL-PA2008NL-PA2009NL
+SMT Gate Drive Transformer, 1:1:1 or 2:1:1 or 2.5:1:1 or 1:1, 9.0x8.6x7.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2002nl pa2008nl pa2009nl p0544nl pa0184nl pa0297nl pa0510nl
+0
+6
+6
+Transformer_SMD
+Pulse_PA2004NL
+SMT Gate Drive Transformer, 1:1:1, 8.6x6.7x3.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2004nl pa0264nl
+0
+6
+6
+Transformer_SMD
+Pulse_PA2005NL
+SMT Gate Drive Transformer, 1:1:1, 11.8x8.8x4.0mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2005nl pa0173nl
+0
+6
+6
+Transformer_SMD
+Pulse_PA2006NL
+SMT Gate Drive Transformer, 1:1, 11.8x8.8x4.0mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2006nl pa0186nl
+0
+4
+4
+Transformer_SMD
+Pulse_PA2007NL
+SMT Gate Drive Transformer, 1:1, 9.0x8.6x7.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf)
+pulse pa2007nl
+0
+4
+4
+Transformer_SMD
+Pulse_PA2777NL
+SMT Gate Drive Transformer, 1:1, 7.1x6.1x5.5mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf)
+pulse pa2777nl
+0
+8
+8
+Transformer_SMD
+Pulse_PA3493NL
+SMT Gate Drive Transformer, 1.25:1, 10.9x9.7x2.7mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf)
+pulse pa3493nl
+0
+4
+4
+Transformer_SMD
+Transformer_Coilcraft_CST1
+Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf)
+Transformer current sense SMD
+0
+8
+8
+Transformer_SMD
+Transformer_Coilcraft_CST2
+Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf)
+Transformer current sense SMD
+0
+8
+8
+Transformer_SMD
+Transformer_Coilcraft_CST2010
+Current sense transformer, SMD, 14.55x19.91x10.50mm (https://www.coilcraft.com/pdfs/cst2010.pdf)
+Transformer current sense SMD
+0
+12
+12
+Transformer_SMD
+Transformer_CurrentSense_8.4x7.2mm
+Transformer current sense SMD 8.4x7.2mm
+Transformer current sense SMD
+0
+8
+8
+Transformer_SMD
+Transformer_ED8_4-Lead_10.5x8mm_P5mm
+Isolated audio transformer, ED8, 4-lead, body 10.5x8mm body, pitch 5mm, height 5mm, https://gitlab.com/kicad/libraries/kicad-footprints/-/merge_requests/3626
+permalloy core 
+0
+4
+4
+Transformer_SMD
+Transformer_Ethernet_Bel_S558-5999-T7-F
+Ethernet Transformer, Bel S558-5999-T7-F, https://www.belfuse.com/resources/ICMs/lan-/S558-5999-T7-F.pdf
+Ethernet Transformer
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_Bourns_PT61017PEL
+https://www.bourns.com/docs/Product-Datasheets/PT61017PEL.pdf
+Transformer Ethernet Single Center-Tap
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_Bourns_PT61020EL
+10/100/1000 Base-T Transformer Module, PT61020EL (https://www.bourns.com/pdfs/PT61020.pdf)
+Gigabit PoE Ethernet Transformer Single
+0
+24
+24
+Transformer_SMD
+Transformer_Ethernet_HALO_TG111-MSC13
+Transformer Ethernet SMD, https://www.haloelectronics.com/pdf/discrete-genesus.pdf
+Transformer Ethernet SMD
+0
+24
+24
+Transformer_SMD
+Transformer_Ethernet_Halo_N2_SO-16_7.11x12.7mm
+Halo N2 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Halo SO Transformer_SMD
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_Halo_N5_SO-16_7.11x12.7mm
+Halo N5 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Halo SO Transformer_SMD
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_Halo_N6_SO-16_7.11x14.73mm
+Halo N6 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+Halo SO Transformer_SMD
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_Wuerth_749013011A
+Ethernet Transformer, Wuerth 749013011A, https://www.we-online.com/katalog/datasheet/749013011A.pdf
+Ethernet Transformer
+0
+16
+16
+Transformer_SMD
+Transformer_Ethernet_YDS_30F-51NL_SO-24_7.1x15.1mm
+YDS 30F-51NL SO, 24 Pin (https://datasheet.lcsc.com/lcsc/1811051610_Shanghai-YDS-Tech-30F-51NL_C123168.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py
+YDS SO Transformer_SMD
+0
+24
+24
+Transformer_SMD
+Transformer_MACOM_SM-22
+https://cdn.macom.com/datasheets/ETC1-1-13.pdf
+RF Transformer
+0
+5
+5
+Transformer_SMD
+Transformer_MiniCircuits_AT224-1A
+SMD RF transformer, 50 ohm, 4.5 to 3000Mhz, https://www.minicircuits.com/pdfs/TC1-1-13M+.pdf
+RF Transformer
+0
+5
+5
+Transformer_SMD
+Transformer_Murata_78250JC
+Murata 78250JC https://www.murata-ps.com/datasheet?/data/magnetics/kmp_78250j.pdf
+Murata transformer
+0
+6
+6
+Transformer_SMD
+Transformer_NF_ETAL_P2781
+NF-Transformer, ETAL, P2781, SMD,
+NF-Transformer ETAL P2781 SMD 
+0
+8
+7
+Transformer_SMD
+Transformer_NF_ETAL_P2781_HandSoldering
+NF-Transformer, ETAL, P2781, SMD, Handsoldering
+NF-Transformer ETAL P2781 SMD Handsoldering 
+0
+8
+7
+Transformer_SMD
+Transformer_NF_ETAL_P3000
+NF-Reansformer, ETAL, P3000, SMD,
+NF-Reansformer ETAL P3000 SMD 
+0
+15
+13
+Transformer_SMD
+Transformer_NF_ETAL_P3000_HandSoldering
+NF-Reansformer, ETAL, P3000, SMD, Handsoldering,
+NF-Reansformer ETAL P3000 SMD Handsoldering 
+0
+15
+13
+Transformer_SMD
+Transformer_NF_ETAL_P3181
+NF-Transformer, ETAL, P3181, SMD,
+NF-Transformer ETAL P3181 SMD 
+0
+7
+6
+Transformer_SMD
+Transformer_NF_ETAL_P3181_HandSoldering
+NF-Transformer, ETAL, P3181, SMD, Hand Soldering,
+NF-Transformer ETAL P3181 SMD Hand Soldering 
+0
+7
+6
+Transformer_SMD
+Transformer_NF_ETAL_P3188
+NF-Transformer, ETAL, P3188, SMD,
+NF-Transformer ETAL P3188 SMD 
+0
+8
+6
+Transformer_SMD
+Transformer_NF_ETAL_P3188_HandSoldering
+NF-Transformer, ETAL, P3188, SMD, Handsoldering,
+NF-Transformer ETAL P3188 SMD Handsoldering 
+0
+8
+6
+Transformer_SMD
+Transformer_NF_ETAL_P3191
+NF-Transformer, ETAL, P3191, SMD,
+NF-Transformer ETAL P3191 SMD 
+0
+8
+6
+Transformer_SMD
+Transformer_NF_ETAL_P3191_HandSoldering
+NF-Transformer, ETAL, P3191, SMD, Handsoldering,
+NF-Transformer ETAL P3191 SMD Handsoldering 
+0
+8
+6
+Transformer_SMD
+Transformer_Pulse_H1100NL
+For H1100NL, H1101NL, H1102NL, H1121NL, H1183NL, H1199NL, HX1188NL, HX1198NL and H1302NL. https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/H1102NL/doc_part/H1102NL.pdf
+H1100NL H1101NL H1102NL H1121NL H1183NL H1199NL HX1188NL HX1198NL H1302N
+0
+16
+16
+Transformer_SMD
+Transformer_Wuerth_750315371
+Power Transformer, horizontal core with bobbin, 6 pin, 2.54mm pitch, 11.24mm row spacing, 12.6x8.3x4.1mm
+transformer flyback
+0
+6
+6
+Transformer_SMD
+Transformer_Wurth_WE-AGDT-EP7
+WE-AGDT Auxiliary Gate Drive Transformer EP7, https://www.we-online.com/components/products/datasheet/750319177.pdf
+auxiliary gate drive transformer
+0
+8
+8
+Transformer_THT
+Autotransformer_Toroid_1Tap_Horizontal_D9.0mm_Amidon-T30
+Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 9mm, Amidon T30,
+Autotransformer Toroid horizontal laying 1 Tap Diameter 9mm Amidon T30 
+0
+3
+3
+Transformer_THT
+Autotransformer_Toroid_1Tap_Horizontal_D10.5mm_Amidon-T37
+Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 10,5mm, Amidon T37,
+Autotransformer Toroid horizontal laying 1 Tap Diameter 10 5mm Amidon T37 
+0
+3
+3
+Transformer_THT
+Autotransformer_Toroid_1Tap_Horizontal_D12.5mm_Amidon-T44
+Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 12,5mm, Amidon T44,
+Autotransformer Toroid horizontal laying 1 Tap Diameter 12 5mm Amidon T44 
+0
+3
+3
+Transformer_THT
+Autotransformer_Toroid_1Tap_Horizontal_D14.0mm_Amidon-T50
+Choke, Inductance, Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 14mm, Amidon T50,
+Choke Inductance Autotransformer Toroid horizontal laying 1 Tap Diameter 14mm Amidon T50 
+0
+3
+3
+Transformer_THT
+Autotransformer_ZS1052-AC
+Ignition coil for xenon flash, http://www.excelitas.com/downloads/ZS1052ACH.pdf
+ignition coil autotransformer
+0
+3
+3
+Transformer_THT
+Transformer_37x44
+transformer 37x44mm²
+transformer 37x44mm²
+0
+12
+4
+Transformer_THT
+Transformer_Breve_TEZ-22x24
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+7
+7
+Transformer_THT
+Transformer_Breve_TEZ-28x33
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+9
+9
+Transformer_THT
+Transformer_Breve_TEZ-35x42
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+9
+9
+Transformer_THT
+Transformer_Breve_TEZ-38x45
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+9
+9
+Transformer_THT
+Transformer_Breve_TEZ-44x52
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+10
+10
+Transformer_THT
+Transformer_Breve_TEZ-47x57
+http://www.breve.pl/pdf/ANG/TEZ_ang.pdf
+TEZ PCB Transformer
+0
+13
+13
+Transformer_THT
+Transformer_CHK_EI30-2VA_1xSec
+Trafo, Printtrafo, CHK, EI30, 2VA, 1x Sec,http://www.eratransformers.com/downloads/030-7585.0.pdf
+Trafo Printtrafo CHK EI30 2VA 1x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI30-2VA_2xSec
+Trafo, Printtrafo, CHK, EI30, 2VA, 2x Sec,
+Trafo Printtrafo CHK EI30 2VA 2x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI30-2VA_Neutral
+Trafo, Printtrafo, CHK, EI30, 2VA, neutral,
+Trafo Printtrafo CHK EI30 2VA neutral 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI38-3VA_1xSec
+Trafo, Printtrafo, CHK, EI38, 3VA, 1x Sec, http://www.eratransformers.com/product-detail/20
+Trafo Printtrafo CHK EI38 3VA 1x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI38-3VA_2xSec
+Trafo, Printtrafo, CHK, EI38, 3VA, 2x Sec, http://www.eratransformers.com/product-detail/20
+Trafo Printtrafo CHK EI38 3VA 2x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI38-3VA_Neutral
+Trafo, Printtrafo, CHK, EI38, 3VA, neutral, http://www.eratransformers.com/product-detail/20
+Trafo Printtrafo CHK EI42 3VA neutral 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI42-5VA_1xSec
+Trafo, Printtrafo, CHK, EI42, 5VA, 1x Sec,
+Trafo Printtrafo CHK EI42 5VA 1x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI42-5VA_2xSec
+Trafo, Printtrafo, CHK, EI42, 5VA, 2x Sec,
+Trafo Printtrafo CHK EI42 5VA 2x Sec 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI42-5VA_Neutral
+Trafo, Printtrafo, CHK, EI42, 5VA, neutral,
+Trafo Printtrafo CHK EI42 5VA neutral 
+0
+10
+10
+Transformer_THT
+Transformer_CHK_EI48-8VA_1xSec
+Trafo, Printtrafo, CHK, EI48, 8VA, 1x Sec, http://www.eratransformers.com/product-detail/18
+Trafo Printtrafo CHK EI48 8VA 1x Sec 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI48-8VA_2xSec
+Trafo, Printtrafo, CHK, EI48, 8VA, 2x Sec, http://www.eratransformers.com/product-detail/18
+Trafo Printtrafo CHK EI48 8VA 2x Sec 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI48-8VA_Neutral
+Trafo, Printtrafo, CHK, EI48, 8VA, neutral, http://www.eratransformers.com/product-detail/18
+Trafo Printtrafo CHK EI48 8VA neutral 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI48-10VA_1xSec
+Trafo, Printtrafo, CHK, EI48, 10VA, 1x Sec,
+Trafo Printtrafo CHK EI48 10VA 1x Sec 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI48-10VA_2xSec
+Trafo, Printtrafo, CHK, EI48, 10VA, 2x Sec, http://www.eratransformers.com/product-detail/18
+Trafo Printtrafo CHK EI48 10VA 2x Sec 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI48-10VA_Neutral
+Trafo, Printtrafo, CHK, EI48, 10VA, neutral, http://www.eratransformers.com/product-detail/18
+Trafo Printtrafo CHK EI48 10VA neutral 
+0
+12
+12
+Transformer_THT
+Transformer_CHK_EI54-12VA_1xSec
+Trafo, Printtrafo, CHK, EI54, 12VA, 1x Sec,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 12VA 1x Sec 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_EI54-12VA_2xSec
+Trafo, Printtrafo, CHK, EI54, 12VA, 2x Sec,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 12VA 2x Sec 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_EI54-12VA_Neutral
+Trafo, Printtrafo, CHK, EI54, 12VA, neutral,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 12VA neutral 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_EI54-16VA_1xSec
+Trafo, Printtrafo, CHK, EI54, 16VA, 1x Sec,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 16VA 1x Sec 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_EI54-16VA_2xSec
+Trafo, Printtrafo, CHK, EI54, 16VA, 2x Sec,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 16VA 2x Sec 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_EI54-16VA_Neutral
+Trafo, Printtrafo, CHK, EI54, 16VA, neutral,http://www.eratransformers.com/product-detail/19
+Trafo Printtrafo CHK EI54 16VA neutral 
+0
+14
+14
+Transformer_THT
+Transformer_CHK_UI30-4VA_Flat
+Trafo, Flattrafo, CHK, UI30, 4VA,
+Trafo Flattrafo CHK UI30 4VA 
+0
+16
+16
+Transformer_THT
+Transformer_CHK_UI39-10VA_Flat
+Trafo, Flattrafo, CHK, UI39, 10VA,
+Trafo Flattrafo CHK UI39 10VA 
+0
+20
+20
+Transformer_THT
+Transformer_Coilcraft_Q4434-B_Rhombus-T1311
+Transformator, Transformer, Flyback, Coilcraft Q4434-B, Rgombus T1311,
+Transformator Transformer Flyback Coilcraft Q4434-B Rgombus T1311 
+0
+8
+8
+Transformer_THT
+Transformer_EPCOS_B66359A1013T_Horizontal
+Transformer, Transformator, ETD29, 13 Pin, Horizontal, EPCOS-B66359A1013T,
+Transformer Transformator ETD29 13 Pin Horizontal EPCOS-B66359A1013T 
+0
+13
+13
+Transformer_THT
+Transformer_EPCOS_B66359J1014T_Vertical
+Transformer, Transformator, ETD29, 14 Pin, Vertical, EPCOS-B66359J1014T,
+Transformer Transformator ETD29 14 Pin Vertical EPCOS-B66359J1014T 
+0
+14
+14
+Transformer_THT
+Transformer_Microphone_Lundahl_LL1538
+AUDIO TRAFO LUNDAHL, https://www.lundahltransformers.com/wp-content/uploads/datasheets/1538_8xl.pdf
+AUDIO TRAFO LUNDAHL
+0
+7
+7
+Transformer_THT
+Transformer_Microphone_Lundahl_LL1587
+AUDIO TRAFO LUNDAHL, https://www.lundahltransformers.com/wp-content/uploads/datasheets/1587.pdf
+AUDIO TRAFO LUNDAHL
+0
+7
+7
+Transformer_THT
+Transformer_Myrra_74040_Horizontal
+Transformer, Transformator, ETD29, 13 Pin, Horizontal, Myrra-74040,
+Transformer Transformator ETD29 13 Pin Horizontal Myrra-74040 
+0
+13
+13
+Transformer_THT
+Transformer_Myrra_EF20_7408x
+EF20 flyback transformer,http://myrra.com/wp-content/uploads/2017/09/Datasheet-74087-74088-74089-rev-A.pdf
+transformer flyback SMPS
+0
+9
+9
+Transformer_THT
+Transformer_Myrra_EI30-5_44000_Horizontal
+Myrra 44000 series encapsulated transformer, 50/60Hz, EI 30-5, 0.6VA, 32.6 x 27.6 x 15.3mm, https://myrra.com/wp-content/uploads/2021/03/Catalogue-Myrra-2022-Final_compressed-5.pdf
+Transformer THT  Myrra
+0
+6
+6
+Transformer_THT
+Transformer_NF_ETAL_1-1_P1200
+NF-Transformer, 1:1, ETAL P1200,http://www.etalgroup.com/sites/default/files/products/P1200_April_2005.pdf
+NF-Transformer 1to1 ETAL P1200 
+0
+4
+4
+Transformer_THT
+Transformer_NF_ETAL_P1165
+NF-Transformer,  ETAL, P1165,http://www.etalgroup.com/sites/default/files/products/P1165_February_2006.pdf
+NF-Transformer ETAL P1165 
+0
+4
+4
+Transformer_THT
+Transformer_NF_ETAL_P3324
+NF-Transformer, ETAL P3324,http://www.etalgroup.com/sites/default/files/products/P3324_April_2005.pdf
+NF-Transformer ETAL P3324 
+0
+4
+4
+Transformer_THT
+Transformer_NF_ETAL_P3356
+NF-Transformer, ETAL P3356, http://www.etalgroup.com/sites/default/files/products/P3356_December_2005.pdf
+NF-Transformer ETAL P3356 
+0
+4
+4
+Transformer_THT
+Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30
+Transformer, Toroid, horizontal, laying, Diameter 9mm, Amidon, T30,
+Transformer Toroid horizontal laying Diameter 9mm Amidon T30 
+0
+4
+4
+Transformer_THT
+Transformer_Toroid_Horizontal_D10.5mm_Amidon-T37
+Transformer, Toroid, horizontal, laying, Diameter 10,5mm, Amidon T37,
+Transformer Toroid horizontal laying Diameter 10 5mm Amidon T37 
+0
+4
+4
+Transformer_THT
+Transformer_Toroid_Horizontal_D12.5mm_Amidon-T44
+Transformer, Toroid, horizontal, laying, Diameter 12,5mm, Amidon T44,
+Transformer Toroid horizontal laying Diameter 12 5mm Amidon T44 
+0
+4
+4
+Transformer_THT
+Transformer_Toroid_Horizontal_D14.0mm_Amidon-T50
+Transformer, Toroid, horizontal, laying, Diameter 14mm, Amidon T50,
+Transformer Toroid horizontal laying Diameter 14mm Amidon T50 
+0
+4
+4
+Transformer_THT
+Transformer_Toroid_Horizontal_D18.0mm
+Transformer, Toroid, tapped, horizontal, laying, Diameter 18mm, 
+Transformer Toroid tapped horizontal laying Diameter 18mm 
+0
+5
+4
+Transformer_THT
+Transformer_Toroid_Tapped_Horizontal_D9.0mm_Amidon-T30
+Transformer, Toroid, tapped, horizontal, laying, Diameter 9mm, Amidon, T30,
+Transformer Toroid tapped horizontal laying Diameter 9mm Amidon T30 
+0
+6
+6
+Transformer_THT
+Transformer_Toroid_Tapped_Horizontal_D10.5mm_Amidon-T37
+Transformer, Toroid, tapped, horizontal, laying, Diameter 10,5mm, Amidon, T37,
+Transformer Toroid tapped horizontal laying Diameter 10 5mm Amidon T37 
+0
+6
+6
+Transformer_THT
+Transformer_Toroid_Tapped_Horizontal_D12.5mm_Amidon-T44
+Transformer, Toroid, tapped, horizontal, laying, Diameter 12,5mm, Amidon, T44,
+Transformer Toroid tapped horizontal laying Diameter 12 5mm Amidon T44 
+0
+6
+6
+Transformer_THT
+Transformer_Toroid_Tapped_Horizontal_D14.0mm_Amidon-T50
+Transformer, Toroid, tapped, horizontal, laying, Diameter 14mm, Amidon T50,
+Transformer Toroid tapped horizontal laying Diameter 14mm Amidon T50 
+0
+6
+6
+Transformer_THT
+Transformer_Triad_VPP16-310
+Power transformer, 2x Pri, 2x Sec, 230/115 VAC to 16/8V (0.31/0.62 A)
+power center-tap
+0
+8
+8
+Transformer_THT
+Transformer_Wuerth_750343373
+Transformer, horizontal core with bobbin, 10 pin, 3.81mm pitch, 15.24mm row spacing, 22x23x17.53mm (https://katalog.we-online.com/ctm/datasheet/750343373.pdf)
+transformer flyback
+0
+10
+10
+Transformer_THT
+Transformer_Wuerth_760871131
+Transformer, horizontal core with bobbin, 14 pin, 2.49 mm pitch, 20 mm row spacing, 25x22.2x16mm https://www.we-online.com/catalog/datasheet/760871131.pdf
+transformer flyback
+0
+14
+14
+Transformer_THT
+Transformer_Zeming_ZMCT103C
+Qingxian Zeming Langxi Electronic ZMCT103C current transformer 1000:1, https://5krorwxhmqqirik.leadongcdn.com/ZMCT103C+specification-aidirBqoKomRilSjpimnokp.pdf
+current transformer ZMCT
+0
+2
+2
+Transformer_THT
+Transformer_Zeming_ZMPT101K
+Qingxian Zeming Langxi Electronic ZMPT101K voltage transformer 1000:1000 2mA:2mA, https://5krorwxhmqqirik.leadongcdn.com/ZMPT101K+specification-aidikBqoKomRilSkopqmikp.pdf
+voltage transformer ZMPT
+0
+4
+4
+Transistor_Power
+GaN_Systems_GaNPX-3_5x6.6mm_Drain2.93x0.6mm
+GaN Systems GaNPX GS66502B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66502B-DS-Rev-200402.pdf
+ganpx gs66502b
+0
+7
+3
+Transistor_Power
+GaN_Systems_GaNPX-3_5x6.6mm_Drain3.76x0.6mm
+GaN Systems GaNPX GS66504B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66504B-DS-Rev-200402.pdf
+ganpx gs66504b
+0
+7
+3
+Transistor_Power
+GaN_Systems_GaNPX-4_7x8.4mm
+GaN Systems GaNPX GS66508B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66508B-DS-Rev-200402.pdf
+ganpx gs66508b
+0
+15
+4
+Transistor_Power_Module
+Infineon_AG-ECONO2
+28-lead TH, EconoPACK 2, same as Littelfuse_Package_H_XN2MM, https://www.infineon.com/dgdl/Infineon-FS75R07N2E4-DS-v02_00-en_de.pdf?fileId=db3a30432f5008fe012f52f916333979
+igbt diode module
+0
+28
+28
+Transistor_Power_Module
+Infineon_AG-ECONO3
+35-lead TH, EconoPACK 3, similar(+0.5mm for Fab layer on Y) as Littelfuse_Package_W_XN2MM, https://www.infineon.com/dgdl/Infineon-FS200R12N3T7-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c80027ecd018083b6ce263011
+igbt diode module
+0
+35
+35
+Transistor_Power_Module
+Infineon_AG-ECONO3B
+41-lead TH, EconoPACK 3B, https://www.infineon.com/dgdl/Infineon-FS300R12N3E7-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c8900bb57018901d6e6f6124b
+igbt diode module
+0
+41
+41
+Transistor_Power_Module
+Infineon_EasyPACK-1B
+22-lead TH, EasyPACK 1B, https://www.infineon.com/dgdl/Infineon-FS30R06W1E3-DataSheet-v02_01-EN.pdf?fileId=db3a304313b8b5a60113cecd4c3102c1
+igbt diode module
+0
+22
+15
+Transistor_Power_Module
+Infineon_EasyPACK-1B_PressFIT
+22-lead TH, EasyPACK 1B, https://www.infineon.com/dgdl/Infineon-FS30R06W1E3-DataSheet-v02_01-EN.pdf?fileId=db3a304313b8b5a60113cecd4c3102c1
+igbt diode module
+0
+22
+15
+Transistor_Power_Module
+Infineon_EasyPIM-1B
+35-lead TH, EasyPIM 1B, https://www.infineon.com/dgdl/Infineon-FP10R06W1E3-DS-v02_01-en_de.pdf?fileId=db3a304412b407950112b43312285a63
+brifge rectifier igbt diode module
+0
+23
+23
+Transistor_Power_Module
+Infineon_EasyPIM-2B
+35-lead TH, EasyPIM 2B, same as ST_ACEPACK-2-CIB, https://www.infineon.com/dgdl/Infineon-FP50R06W2E3-DS-v02_02-EN.pdf?fileId=db3a30431b3e89eb011b455c99987d24
+brifge rectifier igbt diode module
+0
+35
+23
+Transistor_Power_Module
+Littelfuse_Package_H_XBN2MM
+24-lead TH, Package H, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1215h_xbn2mm_datasheet.pdf.pdf
+brifge rectifier igbt diode module
+0
+24
+24
+Transistor_Power_Module
+Littelfuse_Package_H_XN2MM
+28-lead TH, Package H, same as Infineon_AG-ECONO2, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1225h_xn2mm_datasheet.pdf.pdf
+igbt diode module
+0
+28
+28
+Transistor_Power_Module
+Littelfuse_Package_W_XBN2MM
+24-lead TH, Package W, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1250w_xbn2mm_datasheet.pdf.pdf
+brifge rectifier igbt diode module
+0
+35
+24
+Transistor_Power_Module
+Littelfuse_Package_W_XN2MM
+35-lead TH, Package W, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1275w_xn2mm_datasheet.pdf.pdf
+igbt diode module
+0
+35
+35
+Transistor_Power_Module
+ST_ACEPACK-2-CIB
+35-lead TH, ACEPACK 2 CIB, same as Infineon_EasyPIM-2B, https://www.st.com/resource/en/datasheet/a2c25s12m3.pdf
+brifge rectifier igbt diode module
+0
+35
+23
+Transistor_Power_Module
+ST_ACEPACK-2-CIB_PressFIT
+35-lead TH, ACEPACK 2 CIB, PressFIT, https://www.st.com/resource/en/datasheet/a2c50s65m2-f.pdf
+brifge rectifier igbt diode module
+0
+35
+23
+Transistor_Power_Module
+ST_SDIP-25L
+25-lead TH, SDIP-25L, https://www.st.com/resource/en/datasheet/stgips20k60.pdf
+igbt diode module
+0
+25
+25
+Valve
+Valve_ECC-83-1
+Valve ECC-83-1 round pins
+Valve ECC-83-1 round pins
+0
+9
+9
+Valve
+Valve_ECC-83-2
+Valve ECC-83-2 flat pins
+Valve ECC-83-2 flat pins
+0
+10
+9
+Valve
+Valve_EURO
+Valve Euro
+Valve Euro
+0
+7
+5
+Valve
+Valve_Glimm
+Valve Glimm
+Valve Glimm
+0
+2
+2
+Valve
+Valve_Mini_G
+Valve mini G
+Valve mini G
+0
+9
+7
+Valve
+Valve_Mini_P
+Valve mini P
+Valve mini P
+0
+7
+7
+Valve
+Valve_Mini_Pentode_Linear
+Mini-Pentode, 5-pin, e.g. JAN6418
+Valve Mini-Pentode 5-pin JAN6418
+0
+5
+5
+Valve
+Valve_Noval_G
+Valve NOVAL G
+Valve NOVAL G
+0
+11
+9
+Valve
+Valve_Noval_P
+Valve NOVAL P
+Valve NOVAL P
+0
+9
+9
+Valve
+Valve_Octal
+8-pin round valve
+valve
+0
+9
+8
+Varistor
+RV_Disc_D7mm_W3.4mm_P5mm
+Varistor, diameter 7mm, width 3.4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W3.5mm_P5mm
+Varistor, diameter 7mm, width 3.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W3.6mm_P5mm
+Varistor, diameter 7mm, width 3.6mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W3.7mm_P5mm
+Varistor, diameter 7mm, width 3.7mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W3.8mm_P5mm
+Varistor, diameter 7mm, width 3.8mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W3.9mm_P5mm
+Varistor, diameter 7mm, width 3.9mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4.2mm_P5mm
+Varistor, diameter 7mm, width 4.2mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4.3mm_P5mm
+Varistor, diameter 7mm, width 4.3mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4.5mm_P5mm
+Varistor, diameter 7mm, width 4.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4.8mm_P5mm
+Varistor, diameter 7mm, width 4.8mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4.9mm_P5mm
+Varistor, diameter 7mm, width 4.9mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W4mm_P5mm
+Varistor, diameter 7mm, width 4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W5.1mm_P5mm
+Varistor, diameter 7mm, width 5.1mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W5.4mm_P5mm
+Varistor, diameter 7mm, width 5.4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W5.5mm_P5mm
+Varistor, diameter 7mm, width 5.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D7mm_W5.7mm_P5mm
+Varistor, diameter 7mm, width 5.7mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.3mm_P5mm
+Varistor, diameter 9mm, width 3.3mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.4mm_P5mm
+Varistor, diameter 9mm, width 3.4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.5mm_P5mm
+Varistor, diameter 9mm, width 3.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.6mm_P5mm
+Varistor, diameter 9mm, width 3.6mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.7mm_P5mm
+Varistor, diameter 9mm, width 3.7mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.8mm_P5mm
+Varistor, diameter 9mm, width 3.8mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W3.9mm_P5mm
+Varistor, diameter 9mm, width 3.9mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4.1mm_P5mm
+Varistor, diameter 9mm, width 4.1mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4.2mm_P5mm
+Varistor, diameter 9mm, width 4.2mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4.4mm_P5mm
+Varistor, diameter 9mm, width 4.4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4.5mm_P5mm
+Varistor, diameter 9mm, width 4.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4.8mm_P5mm
+Varistor, diameter 9mm, width 4.8mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W4mm_P5mm
+Varistor, diameter 9mm, width 4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W5.2mm_P5mm
+Varistor, diameter 9mm, width 5.2mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W5.4mm_P5mm
+Varistor, diameter 9mm, width 5.4mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W5.5mm_P5mm
+Varistor, diameter 9mm, width 5.5mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W5.7mm_P5mm
+Varistor, diameter 9mm, width 5.7mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D9mm_W6.1mm_P5mm
+Varistor, diameter 9mm, width 6.1mm, pitch 5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W3.9mm_P7.5mm
+Varistor, diameter 12mm, width 3.9mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.2mm_P7.5mm
+Varistor, diameter 12mm, width 4.2mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.3mm_P7.5mm
+Varistor, diameter 12mm, width 4.3mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.4mm_P7.5mm
+Varistor, diameter 12mm, width 4.4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.5mm_P7.5mm
+Varistor, diameter 12mm, width 4.5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.6mm_P7.5mm
+Varistor, diameter 12mm, width 4.6mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.7mm_P7.5mm
+Varistor, diameter 12mm, width 4.7mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4.8mm_P7.5mm
+Varistor, diameter 12mm, width 4.8mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W4mm_P7.5mm
+Varistor, diameter 12mm, width 4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W5.1mm_P7.5mm
+Varistor, diameter 12mm, width 5.1mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W5.4mm_P7.5mm
+Varistor, diameter 12mm, width 5.4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W5.8mm_P7.5mm
+Varistor, diameter 12mm, width 5.8mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W5mm_P7.5mm
+Varistor, diameter 12mm, width 5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W6.1mm_P7.5mm
+Varistor, diameter 12mm, width 6.1mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W6.2mm_P7.5mm
+Varistor, diameter 12mm, width 6.2mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W6.3mm_P7.5mm
+Varistor, diameter 12mm, width 6.3mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W6.7mm_P7.5mm
+Varistor, diameter 12mm, width 6.7mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W7.1mm_P7.5mm
+Varistor, diameter 12mm, width 7.1mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W7.5mm_P7.5mm
+Varistor, diameter 12mm, width 7.5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D12mm_W7.9mm_P7.5mm
+Varistor, diameter 12mm, width 7.9mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W3.9mm_P7.5mm
+Varistor, diameter 15.5mm, width 3.9mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.2mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.2mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.3mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.3mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.4mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.5mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.6mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.6mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.7mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.7mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.8mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.8mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4.9mm_P7.5mm
+Varistor, diameter 15.5mm, width 4.9mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W4mm_P7.5mm
+Varistor, diameter 15.5mm, width 4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W5.2mm_P7.5mm
+Varistor, diameter 15.5mm, width 5.2mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W5.4mm_P7.5mm
+Varistor, diameter 15.5mm, width 5.4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W5.9mm_P7.5mm
+Varistor, diameter 15.5mm, width 5.9mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W5mm_P7.5mm
+Varistor, diameter 15.5mm, width 5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W6.1mm_P7.5mm
+Varistor, diameter 15.5mm, width 6.1mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W6.3mm_P7.5mm
+Varistor, diameter 15.5mm, width 6.3mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W6.4mm_P7.5mm
+Varistor, diameter 15.5mm, width 6.4mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W6.8mm_P7.5mm
+Varistor, diameter 15.5mm, width 6.8mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W7.2mm_P7.5mm
+Varistor, diameter 15.5mm, width 7.2mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W7.5mm_P7.5mm
+Varistor, diameter 15.5mm, width 7.5mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W8mm_P7.5mm
+Varistor, diameter 15.5mm, width 8mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D15.5mm_W11mm_P7.5mm
+Varistor, diameter 15.5mm, width 11mm, pitch 7.5mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D16.5mm_W6.7mm_P7.5mm
+Varistor, diameter 16.5mm, width 6.7mm, pitch 5mm, https://katalog.we-online.de/pbs/datasheet/820542711.pdf
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.3mm_P10mm
+Varistor, diameter 21.5mm, width 4.3mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.4mm_P10mm
+Varistor, diameter 21.5mm, width 4.4mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.5mm_P10mm
+Varistor, diameter 21.5mm, width 4.5mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.6mm_P10mm
+Varistor, diameter 21.5mm, width 4.6mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.7mm_P10mm
+Varistor, diameter 21.5mm, width 4.7mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.8mm_P10mm
+Varistor, diameter 21.5mm, width 4.8mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W4.9mm_P10mm
+Varistor, diameter 21.5mm, width 4.9mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5.1mm_P10mm
+Varistor, diameter 21.5mm, width 5.1mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5.3mm_P10mm
+Varistor, diameter 21.5mm, width 5.3mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5.4mm_P10mm
+Varistor, diameter 21.5mm, width 5.4mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5.6mm_P10mm
+Varistor, diameter 21.5mm, width 5.6mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5.8mm_P10mm
+Varistor, diameter 21.5mm, width 5.8mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W5mm_P10mm
+Varistor, diameter 21.5mm, width 5mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W6.1mm_P7.5mm
+varistor
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W6.3mm_P10mm
+Varistor, diameter 21.5mm, width 6.3mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W6.5mm_P10mm
+Varistor, diameter 21.5mm, width 6.5mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W6.7mm_P10mm
+Varistor, diameter 21.5mm, width 6.7mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W6.8mm_P10mm
+Varistor, diameter 21.5mm, width 6.8mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W7.1mm_P10mm
+Varistor, diameter 21.5mm, width 7.1mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W7.5mm_P10mm
+Varistor, diameter 21.5mm, width 7.5mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W7.9mm_P10mm
+Varistor, diameter 21.5mm, width 7.9mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W8.4mm_P10mm
+Varistor, diameter 21.5mm, width 8.4mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Disc_D21.5mm_W11.4mm_P10mm
+Varistor, diameter 21.5mm, width 11.4mm, pitch 10mm
+varistor SIOV
+0
+2
+2
+Varistor
+RV_Rect_V25S440P_L26.5mm_W8.2mm_P12.7mm
+Varistor, V25S440P, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=b410c42c-51d1-460e-b1d9-d105d93c9679&filename=littelfuse-varistor-ultramov25s-datasheet
+varistor
+0
+2
+2
+Varistor
+Varistor_Panasonic_VF
+Panasonic VF series varistor, 6x8mm body, 3.2mm height, https://mediap.industry.panasonic.eu/assets/imported/industrial.panasonic.com/cdbs/www-data/pdf/AWA0000/AWA0000C4.pdf
+Varistor VF
+0
+2
+2
diff --git a/hosts/mac-nix/default.nix b/hosts/mac-nix/default.nix
new file mode 100644
index 00000000..15f224e9
--- /dev/null
+++ b/hosts/mac-nix/default.nix
@@ -0,0 +1,110 @@
+{
+  delib,
+  inputs,
+  pkgs,
+  config,
+  lib,
+  ...
+}: let
+  system = "aarch64-darwin";
+in
+  delib.host {
+    name = "Conners-MacBook-Air";
+    rice = "empty";
+    type = "laptop";
+
+    home.home.stateVersion = "24.11";
+    homeManagerSystem = system;
+
+    myconfig = {
+      features = {
+        engineer.enable = true;
+      };
+      programs = {
+        dx.enable = true;
+        catls.enable = true;
+        convert_img.enable = true;
+      };
+    };
+
+    nixos = {
+      imports = [
+        inputs.determinate.nixosModules.default
+      ];
+      nixpkgs.hostPlatform = "x86_64-linux";
+      nixpkgs.config.allowUnfree = true;
+      nixpkgs.config.allowUnsupportedSystem = true;
+      system.stateVersion = "24.11";
+
+      # Minimal file system configuration to prevent assertion failures
+      fileSystems."/" = {
+        device = "/dev/disk/by-label/nixos";
+        fsType = "ext4";
+      };
+
+      boot.loader.systemd-boot.enable = true;
+      boot.loader.efi.canTouchEfiVariables = true;
+    };
+
+    darwin = {myconfig, ...}: {
+      imports = [
+        # inputs.determinate.darwinModules.default
+      ];
+
+      nixpkgs = {
+        hostPlatform = system;
+        config.allowUnfree = true;
+      };
+      nix.enable = false;
+      # $ nix-env -qaP | grep wget
+      programs = {
+        direnv = {
+          enable = true;
+          nix-direnv = {
+            enable = true;
+            package = pkgs.nix-direnv;
+          };
+        };
+        ssh = {
+          extraConfig = ''
+            SetEnv TERM=xterm-256color
+          '';
+        };
+      };
+      system = {
+        stateVersion = 5;
+        primaryUser = myconfig.constants.username;
+        defaults = {
+          dock.autohide = true;
+
+          trackpad = {
+            Clicking = true;
+            TrackpadThreeFingerDrag = true;
+            Dragging = true;
+          };
+        };
+      };
+
+      environment = {
+        systemPackages = [
+          # Macos Only
+          pkgs.aerospace
+          pkgs.raycast
+          pkgs.xcodes
+          # Shared
+        ];
+        shells = [pkgs.zsh];
+
+        pathsToLink = ["/share/qemu"];
+        etc."containers/containers.conf.d/99-gvproxy-path.conf".text = ''
+          [engine]
+          helper_binaries_dir = ["${pkgs.gvproxy}/bin"]
+        '';
+      };
+      users.users.${myconfig.constants.username} = {
+        home = "/Users/${myconfig.constants.username}";
+      };
+
+      security.pam.services.sudo_local.touchIdAuth = true;
+    };
+  }
diff --git a/hosts/oxe-nixos/default.nix b/hosts/oxe-nixos/default.nix
new file mode 100644
index 00000000..8cca8a2c
--- /dev/null
+++ b/hosts/oxe-nixos/default.nix
@@ -0,0 +1,78 @@
+{
+  delib,
+  inputs,
+  ...
+}:
+delib.host {
+  name = "oxe-nixos";
+
+  rice = "dark";
+  type = "server";
+  home.home.stateVersion = "24.11";
+
+  darwin = {
+    imports = [
+      inputs.determinate.darwinModules.default
+    ];
+    nixpkgs.hostPlatform = "x86_64-darwin";
+    system.stateVersion = "24.11";
+  };
+
+  nixos = {
+    nixpkgs.config.allowUnfree = true;
+    imports = [
+      inputs.determinate.nixosModules.default
+      ./hardware.nix
+    ];
+
+    myconfig = {
+      features = {
+        amd.enable = true;
+        hyprland.enable = true;
+        engineer.enable = true;
+        darknet.enable = true;
+        secrets.enable = true;
+        ollama.enable = true;
+      };
+    };
+
+    boot = {
+      plymouth.enable = true;
+      loader = {
+        systemd-boot.enable = true;
+        efi.canTouchEfiVariables = true;
+        systemd-boot.configurationLimit = 4;
+      };
+    };
+
+    security = {
+      rtkit.enable = true;
+      pam.services.login.enableGnomeKeyring = true;
+    };
+    virtualisation.docker.enable = true;
+
+    services = {
+      openssh = {
+        enable = true;
+        passwordAuthentication = false;
+      };
+    };
+
+    time.timeZone = "America/Chicago";
+    i18n = {
+      # Select internationalisation properties.
+      defaultLocale = "en_US.UTF-8";
+      extraLocaleSettings = {
+        LC_ADDRESS = "en_US.UTF-8";
+        LC_IDENTIFICATION = "en_US.UTF-8";
+        LC_MEASUREMENT = "en_US.UTF-8";
+        LC_MONETARY = "en_US.UTF-8";
+        LC_NAME = "en_US.UTF-8";
+        LC_NUMERIC = "en_US.UTF-8";
+        LC_PAPER = "en_US.UTF-8";
+        LC_TELEPHONE = "en_US.UTF-8";
+        LC_TIME = "en_US.UTF-8";
+      };
+    };
+  };
+}
diff --git a/hosts/oxe-nixos/hardware.nix b/hosts/oxe-nixos/hardware.nix
new file mode 100644
index 00000000..6d81ed79
--- /dev/null
+++ b/hosts/oxe-nixos/hardware.nix
@@ -0,0 +1,49 @@
+{
+  delib,
+  lib,
+  modulesPath,
+  config,
+  ...
+}:
+delib.host {
+  name = "oxe-nixos";
+
+  homeManagerSystem = "x86_64-linux";
+  home.home.stateVersion = "24.11";
+
+  nixos = {
+    nixpkgs.hostPlatform = "x86_64-linux";
+    system.stateVersion = "24.11";
+
+    imports = [
+      (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+    boot.initrd.availableKernelModules = ["xhci_pci" "ahci" "usbhid" "usb_storage" "uas" "sd_mod" "sr_mod"];
+    boot.initrd.kernelModules = [];
+    boot.kernelModules = ["kvm-amd"];
+    boot.extraModulePackages = [];
+
+    fileSystems."/" = {
+      device = "/dev/disk/by-uuid/8b04d56c-a796-4ade-b730-0a242a42f113";
+      fsType = "ext4";
+    };
+
+    fileSystems."/boot" = {
+      device = "/dev/disk/by-uuid/A0A0-F4B7";
+      fsType = "vfat";
+      options = ["fmask=0077" "dmask=0077"];
+    };
+
+    swapDevices = [];
+
+    # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+    # (the default) this is the recommended approach. When using systemd-networkd it's
+    # still possible to use this option, but it's recommended to use it in conjunction
+    # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+    # networking.useDHCP = lib.mkDefault true;
+    # networking.interfaces.enp5s0.useDHCP = lib.mkDefault true;
+
+    hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+  };
+}
diff --git a/hosts/xps-nixos/default.nix b/hosts/xps-nixos/default.nix
new file mode 100644
index 00000000..467a70e2
--- /dev/null
+++ b/hosts/xps-nixos/default.nix
@@ -0,0 +1,109 @@
+{
+  delib,
+  inputs,
+  ...
+}:
+delib.host {
+  name = "xps-nixos";
+
+  rice = "dark";
+  type = "laptop";
+  home.home.stateVersion = "24.11";
+
+  # This is just here to make the denix host module happy.
+  # It evaluates each hosts: darwin, nixos, ... TODO: Improve comment.
+  darwin = {
+    imports = [
+      inputs.determinate.darwinModules.default
+    ];
+    nixpkgs.hostPlatform = "x86_64-darwin";
+    system.stateVersion = "24.11";
+  };
+
+  nixos = {
+    imports = [
+      inputs.determinate.nixosModules.default
+    ];
+
+    myconfig = {
+      features = {
+        nvidia.enable = true;
+        power-efficient.enable = true;
+        audio.enable = true;
+        bluetooth.enable = true;
+        hyprland.enable = true;
+        engineer.enable = true;
+        darknet.enable = true;
+        secrets.enable = true;
+        student.enable = true;
+        # ollama.enable = true;
+      };
+      programs = {
+        proton-x.enable = true;
+      };
+    };
+
+    nixpkgs.config.allowUnfree = true;
+    nixpkgs.hostPlatform = "x86_64-linux";
+
+    boot = {
+      plymouth.enable = true;
+      loader = {
+        systemd-boot.enable = true;
+        efi.canTouchEfiVariables = true;
+        systemd-boot.configurationLimit = 4;
+      };
+    };
+
+    networking = {
+      hostName = "xps-nixos";
+      networkmanager.enable = true;
+      defaultGateway = {
+        #   # address = "192.168.1.1";
+        #   # interface = "wlp0s20f3";
+        address = "192.168.1.19";
+        #   # interface = "enp0s13f0u3u1c2";
+        interface = "enp0s13f0u4c2";
+      };
+    };
+
+    hardware = {
+      enableAllFirmware = true;
+      nvidia = {
+        prime = {
+          # Bus ID of the Intel GPU.
+          intelBusId = "PCI:0:2:0";
+          # Bus ID of the NVIDIA GPU.
+          nvidiaBusId = "PCI:1:0:0";
+        };
+      };
+    };
+    security = {
+      rtkit.enable = true;
+      pam.services.login.enableGnomeKeyring = true;
+    };
+    services = {
+      ## Devices
+      printing.enable = true;
+      libinput.enable = true;
+      gnome.gnome-keyring.enable = true;
+    };
+
+    time.timeZone = "America/Chicago";
+    i18n = {
+      # Select internationalisation properties.
+      defaultLocale = "en_US.UTF-8";
+      extraLocaleSettings = {
+        LC_ADDRESS = "en_US.UTF-8";
+        LC_IDENTIFICATION = "en_US.UTF-8";
+        LC_MEASUREMENT = "en_US.UTF-8";
+        LC_MONETARY = "en_US.UTF-8";
+        LC_NAME = "en_US.UTF-8";
+        LC_NUMERIC = "en_US.UTF-8";
+        LC_PAPER = "en_US.UTF-8";
+        LC_TELEPHONE = "en_US.UTF-8";
+        LC_TIME = "en_US.UTF-8";
+      };
+    };
+  };
+}
diff --git a/hosts/xps-nixos/hardware.nix b/hosts/xps-nixos/hardware.nix
new file mode 100644
index 00000000..50672338
--- /dev/null
+++ b/hosts/xps-nixos/hardware.nix
@@ -0,0 +1,76 @@
+{
+  delib,
+  lib,
+  modulesPath,
+  config,
+  inputs,
+  ...
+}:
+delib.host {
+  name = "xps-nixos";
+
+  homeManagerSystem = "x86_64-linux";
+  home.home.stateVersion = "24.11";
+
+  nixos = {
+    nixpkgs.hostPlatform = "x86_64-linux";
+    system.stateVersion = "24.11";
+
+    imports = [
+      (modulesPath + "/installer/scan/not-detected.nix")
+      inputs.nixos-hardware.nixosModules.dell-xps-15-9510
+    ];
+
+    boot = {
+      initrd.availableKernelModules = [
+        "xhci_pci"
+        "thunderbolt"
+        "nvme"
+        "uas"
+        "sd_mod"
+        "rtsx_pci_sdmmc"
+      ];
+      initrd.kernelModules = [];
+      kernelModules = ["kvm-intel"];
+      extraModulePackages = [];
+    };
+
+    fileSystems = {
+      "/" = {
+        device = "/dev/disk/by-uuid/f7dce4a0-666b-4630-ba88-238aeb3365aa";
+        fsType = "ext4";
+      };
+      "/boot" = {
+        device = "/dev/disk/by-uuid/431D-715A";
+        fsType = "vfat";
+        options = ["fmask=0077" "dmask=0077"];
+      };
+      "/mnt/media" = {
+        device = "/dev/disk/by-uuid/ce3b09bd-96b8-481d-9b0f-b1e18e08cd51";
+        fsType = "ext4";
+        options = ["defaults" "nofail" "x-gvfs-show"];
+      };
+    };
+    swapDevices = [];
+
+    # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+    # (the default) this is the recommended approach. When using systemd-networkd it's
+    # still possible to use this option, but it's recommended to use it in conjunction
+    # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+    networking = {
+      hostName = "xps-nixos";
+      networkmanager.enable = true;
+      useDHCP = lib.mkDefault true;
+      # interfaces.enp0s13f0u3u1c2 = {
+      #   useDHCP = true; # If you want to use DHCP
+      #   # Or for static IP:
+      #   # ipv4.addresses = [ {
+      #   #   address = "192.168.1.2";
+      #   #   prefixLength = 24;
+      #   # } ];
+      # };
+    };
+
+    hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+  };
+}
diff --git a/infra b/infra
new file mode 160000
index 00000000..1f8f18f2
--- /dev/null
+++ b/infra
@@ -0,0 +1 @@
+Subproject commit 1f8f18f289a6389ad275675b14fb2bccb4f66ed4
diff --git a/lib/module/default.nix b/lib/module/default.nix
deleted file mode 100644
index 4c317ae0..00000000
--- a/lib/module/default.nix
+++ /dev/null
@@ -1,31 +0,0 @@
-{
-  # This is the merged library containing your namespaced library as well as all libraries from
-  # your flake's inputs.
-  lib,
-  # Your flake inputs are also available.
-  inputs,
-  # The namespace used for your flake, defaulting to "internal" if not set.
-  namespace,
-  # Additionally, Snowfall Lib's own inputs are passed. You probably don't need to use this!
-  snowfall-inputs,
-}:
-with lib; rec {
-  mkOpt = type: default: description:
-    mkOption {inherit type default description;};
-
-  mkOpt' = type: default: mkOpt type default null;
-
-  mkBoolOpt = mkOpt types.bool;
-
-  mkBoolOpt' = mkOpt' types.bool;
-
-  enabled = {
-    enable = true;
-  };
-
-  disabled = {
-    enable = false;
-  };
-
-  nullOrEnums = enums: with types; nullOr (enum enums);
-}
diff --git a/modules/config/args.nix b/modules/config/args.nix
new file mode 100644
index 00000000..a4139fb2
--- /dev/null
+++ b/modules/config/args.nix
@@ -0,0 +1,44 @@
+# args.nix - Shared Arguments Configuration Module
+#
+# This module manages the argument passing system between different configuration contexts
+# (NixOS, Home Manager, and shared). It provides a centralized way to pass values and
+# configurations between modules across different platforms.
+#
+# The args system allows:
+# - Shared arguments available to both NixOS and Home Manager configurations
+# - Platform-specific arguments for NixOS-only or Home Manager-only contexts
+# - Consistent argument propagation through the module system
+#
+# Usage:
+# - Set `myconfig.args.shared.someValue = "value"` to make it available everywhere
+# - Set `myconfig.args.nixos.someValue = "value"` for NixOS-specific arguments
+# - Set `myconfig.args.home.someValue = "value"` for Home Manager-specific arguments
+{delib, ...}:
+delib.module {
+  name = "args";
+
+  options.args = with delib; {
+    # Shared arguments available to both NixOS and Home Manager configurations
+    shared = attrsLegacyOption {};
+
+    # NixOS-specific arguments only available in NixOS context
+    nixos = attrsLegacyOption {};
+
+    # Home Manager-specific arguments only available in Home Manager context
+    home = attrsLegacyOption {};
+  };
+
+  # NixOS configuration: merge shared and NixOS-specific arguments
+  nixos.always = {cfg, ...}: {
+    imports = [
+      {_module.args = cfg.shared // cfg.nixos;}
+    ];
+  };
+
+  # Home Manager configuration: merge shared and Home Manager-specific arguments
+  home.always = {cfg, ...}: {
+    imports = [
+      {_module.args = cfg.shared // cfg.home;}
+    ];
+  };
+}
diff --git a/modules/config/constants.nix b/modules/config/constants.nix
new file mode 100644
index 00000000..94f9e3cd
--- /dev/null
+++ b/modules/config/constants.nix
@@ -0,0 +1,34 @@
+# constants.nix - User Constants Configuration Module
+#
+# This module defines read-only user constants that are used throughout the configuration.
+# These values are centralized here to ensure consistency across all modules and platforms.
+#
+# All constants are marked as read-only to prevent accidental modification during runtime.
+# These values are used for:
+# - User account creation and configuration
+# - Git configuration
+# - Email setup and identification
+# - Home directory paths and permissions
+#
+# To modify these values, edit this file directly and rebuild the configuration.
+{delib, ...}:
+delib.module {
+  name = "constants";
+
+  options.constants = with delib; {
+    # Primary username for the system (derived from host configuration)
+    # This allows different usernames per machine (e.g., "connerohnesorge" locally, "cohnesor" at work)
+    username = strOption "connerohnesorge";
+
+    # Full display name for the user (used in Git commits and system identification)
+    userfullname = readOnly (strOption "Conner Ohnesorge");
+
+    # Primary email address (used for Git commits, SSH keys, and notifications)
+    useremail = readOnly (strOption "connerohnesorge@outlook.com");
+  };
+
+  # Derive username from host configuration
+  myconfig.always = {myconfig, ...}: {
+    constants.username = myconfig.host.username;
+  };
+}
diff --git a/modules/config/home.nix b/modules/config/home.nix
new file mode 100644
index 00000000..559d375d
--- /dev/null
+++ b/modules/config/home.nix
@@ -0,0 +1,129 @@
+# home.nix - Base Home Manager Configuration Module
+#
+# This module provides the foundational Home Manager configuration that applies
+# to all systems regardless of platform. It handles cross-platform differences
+# and sets up essential user environment settings.
+#
+# Key responsibilities:
+# - Cross-platform home directory configuration
+# - GTK theming (Linux-only)
+# - Base system utilities and fetch tools
+# - Essential environment variables
+# - Home Manager service configurations
+#
+# Platform-specific behavior:
+# - Linux: Enables GTK theming with dark theme preference
+# - macOS: Uses /Users/ path convention and includes m-cli
+# - Both: Provides consistent editor and fetch tool experience
+{
+  delib,
+  pkgs,
+  inputs,
+  ...
+}: let
+  inherit (pkgs.stdenv) isDarwin isLinux;
+in
+  delib.module {
+    name = "home";
+
+    home.always = {myconfig, ...}: let
+      inherit (myconfig.constants) username;
+    in {
+      imports = [
+        inputs.zen-browser.homeModules.beta
+      ];
+
+      programs.zen-browser = {
+        enable = true;
+        profiles.default = {
+          isDefault = true;
+          extensions.packages = with pkgs.firefox-addons; [
+            surfingkeys
+            keeper-password-manager
+          ];
+        };
+      };
+
+      # GTK theming configuration (Linux only)
+      # Provides a consistent dark theme across GTK applications
+      gtk =
+        if isLinux
+        then {
+          enable = true;
+          theme = {
+            name = pkgs.lib.mkForce "adw-gtk3-dark";
+            package = pkgs.lib.mkForce pkgs.adw-gtk3;
+          };
+          iconTheme.package = pkgs.papirus-icon-theme;
+          iconTheme.name = "Papirus";
+
+          # # Force dark theme preference for GTK3 applications
+          gtk3.extraConfig = {
+            Settings = ''
+              gtk-application-prefer-dark-theme=1
+            '';
+          };
+          #
+          # Force dark theme preference for GTK4 applications
+          gtk4.extraConfig = {
+            Settings = ''
+              gtk-application-prefer-dark-theme=1
+            '';
+          };
+        }
+        else {};
+
+      # Workaround for home-manager news notification bug
+      # See: https://github.com/nix-community/home-manager/issues/2033
+      news = {
+        display = "silent";
+        entries = pkgs.lib.mkForce [];
+      };
+
+      # Enable home-manager to manage itself
+      programs.home-manager.enable = true;
+
+      # MPRIS proxy service for media key support (Linux only)
+      services.mpris-proxy.enable =
+        if isLinux
+        then true
+        else false;
+
+      home = {
+        # Set username from constants
+        inherit username;
+
+        # Platform-specific home directory paths
+        homeDirectory =
+          if isDarwin
+          then "/Users/${username}"
+          else "/home/${username}";
+
+        # Base system utility packages
+        # Fetch tools for system information display
+        packages = with pkgs;
+          [
+            cpufetch # CPU information fetcher
+            fastfetch # Fast system information display
+            ipfetch # IP and network information
+            onefetch # Git repository information
+          ]
+          # Linux-specific packages
+          ++ lib.optionals isLinux [
+            ramfetch # RAM usage information
+          ]
+          # macOS-specific packages
+          ++ lib.optionals isDarwin [
+            m-cli # macOS command line tools
+          ];
+
+        # Essential environment variables for consistent editor experience
+        sessionVariables = {
+          EDITOR = "nvim"; # Default text editor
+          SYSTEMD_EDITOR = "nvim"; # Editor for systemd operations
+          VISUAL = "nvim"; # Visual editor for applications
+          MANPAGER = "nvim +Man!"; # Manpage viewer
+        };
+      };
+    };
+  }
diff --git a/modules/config/hosts.nix b/modules/config/hosts.nix
new file mode 100644
index 00000000..86042851
--- /dev/null
+++ b/modules/config/hosts.nix
@@ -0,0 +1,122 @@
+# hosts.nix - Host Type Definitions and Feature Mapping Module
+#
+# This module defines the host classification system used throughout the configuration.
+# It provides a structured way to categorize systems and automatically enable appropriate
+# features based on the host type.
+#
+# Host Types:
+# - desktop: Full-featured workstation (cli, gui, engineer features)
+# - laptop: Portable system with power management (cli, gui, engineer, powersave, nvidia)
+# - server: Headless system with minimal features (cli only)
+#
+# Features System:
+# - cli: Command-line utilities (eza, bat, nh, etc.) - essential tools for productivity
+# - gui: GUI applications and desktop environment modules (gnome-keyring, wakatime, etc.)
+# - engineer: Development tools and programming environments
+# - powersave: Power management and battery optimization (laptop-specific)
+#
+# Display Configuration:
+# - Multi-monitor support with per-display settings
+# - Automatic kernel parameter generation for display resolution
+# - Touch screen detection and configuration
+{delib, ...}:
+delib.module {
+  name = "hosts";
+
+  options = with delib; let
+    # Available feature categories that can be enabled per host type
+    allFeatures = ["cli" "gui" "engineer" "powersave"];
+
+    # Host submodule definition with type-specific feature defaults
+    host = {config, ...}: {
+      options =
+        hostSubmoduleOptions
+        // {
+          # Username for this host (allows different usernames per machine)
+          username = strOption "connerohnesorge";
+
+          # Home Manager user - defaults to username for multi-user support
+          homeManagerUser = strOption config.username;
+
+          # Required: Host type classification
+          type = noDefault (enumOption ["desktop" "server" "laptop"] null);
+
+          # Computed boolean flags for convenient host type checking
+          isDesktop = boolOption (config.type == "desktop");
+          isLaptop = boolOption (config.type == "laptop");
+          isServer = boolOption (config.type == "server");
+
+          # Feature enablement with sensible defaults per host type
+          # Features are automatically selected based on host type but can be overridden
+          features =
+            listOfOption (enum allFeatures)
+            {
+              # Desktop: Full-featured workstation setup
+              desktop = ["features.engineer"];
+              # Server: Minimal headless configuration
+              server = [""];
+              # Laptop: Full features + power management + NVIDIA support
+              laptop = ["cli" "gui" "features.engineer" "features.power-efficient" "features.nvidia"];
+            }
+            .${
+              config.type
+            };
+
+          # Display configuration for multi-monitor setups
+          displays = listOfOption (submodule {
+            options = {
+              # Display state
+              enable = boolOption true;
+              touchscreen = boolOption false;
+
+              # Display identification (e.g. DP-1, HDMI-A-1, eDP-1)
+              name = noDefault (strOption null);
+
+              # Primary display detection (auto-set for single display)
+              primary = boolOption (builtins.length config.displays == 1);
+
+              # Display properties
+              refreshRate = intOption 60; # Default to 60Hz
+              width = intOption 1920; # Default to 1920x1080
+              height = intOption 1080;
+              x = intOption 0; # Position in multi-monitor setup
+              y = intOption 0;
+            };
+          }) [];
+        }
+        //
+        # Generate boolean options for each feature (e.g., cliFeatured, guiFeatured)
+        # This allows modules to check `myconfig.host.cliFeatured` easily
+        builtins.listToAttrs (
+          map (feature: {
+            name = "${feature}Featured";
+            value = boolOption (builtins.elem feature config.features);
+          })
+          allFeatures
+        );
+    };
+  in {
+    # Single host configuration option
+    host = hostOption host;
+    # Multiple hosts configuration option
+    hosts = hostsOption host;
+  };
+
+  # Make host configurations available as shared arguments
+  myconfig.always = {myconfig, ...}: {
+    args.shared = {
+      inherit (myconfig) host hosts;
+    };
+  };
+
+  # NixOS-specific configuration
+  # Automatically configure kernel video parameters based on display settings
+  nixos.always = {myconfig, ...}: {
+    boot.kernelParams = map (display: with display; "video=${name}:${toString width}x${toString height}@${toString refreshRate}") myconfig.host.displays;
+  };
+
+  # Home Manager configuration with host name validation
+  home.always = {myconfig, ...}: {
+    assertions = delib.hostNamesAssertions myconfig.hosts;
+  };
+}
diff --git a/modules/config/rices.nix b/modules/config/rices.nix
new file mode 100644
index 00000000..5eca5021
--- /dev/null
+++ b/modules/config/rices.nix
@@ -0,0 +1,68 @@
+# rices.nix - Theme System Configuration Module
+#
+# This module manages the theming system (called "rices" in the context of system theming)
+# using Stylix for consistent color schemes and styling across all applications.
+#
+# The rice system provides:
+# - Centralized theme management through Stylix integration
+# - Consistent Base16 color schemes across all applications
+# - Automatic theming for supported programs and desktop environments
+# - Per-host theme selection and customization
+#
+# Stylix Integration:
+# - NixOS: Full system-wide theming including display managers and system services
+# - Home Manager: User-space application theming (currently commented out but available)
+# - Base16 color scheme support for consistent color palettes
+#
+# Usage:
+# - Define rice configurations in the `rices/` directory
+# - Set `myconfig.rice = "theme-name"` in host configurations
+# - Stylix will automatically apply the theme to supported applications
+{
+  delib,
+  inputs,
+  ...
+}:
+delib.module {
+  name = "rices";
+
+  options = with delib; let
+    # Rice (theme) submodule definition
+    # Inherits standard rice options from delib framework
+    rice = {
+      options = riceSubmoduleOptions;
+    };
+  in {
+    # Single rice configuration option
+    rice = riceOption rice;
+    # Multiple rices configuration option
+    rices = ricesOption rice;
+  };
+
+  # Home Manager configuration
+  # Note: Stylix home-manager module is currently disabled but available
+  home.always = {myconfig, ...}: {
+    # imports = [inputs.stylix.homeModules.stylix];
+
+    # Validate that all referenced rice names exist in the rices directory
+    assertions = delib.riceNamesAssertions myconfig.rices;
+  };
+
+  # NixOS configuration with full Stylix integration
+  nixos.always = {myconfig, ...}: {
+    # Import Stylix module for system-wide theming
+    imports = [inputs.stylix.nixosModules.stylix];
+
+    # Apply firefox-addons overlay for zen-browser extensions
+    nixpkgs.overlays = [inputs.firefox-addons.overlays.default];
+
+    # Validate that all referenced rice names exist in the rices directory
+    assertions = delib.riceNamesAssertions myconfig.rices;
+  };
+
+  # Darwin configuration
+  darwin.always = {myconfig, ...}: {
+    # Apply firefox-addons overlay for zen-browser extensions
+    nixpkgs.overlays = [inputs.firefox-addons.overlays.default];
+  };
+}
diff --git a/modules/config/user.nix b/modules/config/user.nix
new file mode 100644
index 00000000..53e798d4
--- /dev/null
+++ b/modules/config/user.nix
@@ -0,0 +1,188 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  keys = [
+    "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIKkl3bfwNy75UX9kAGk9WLMTVW0lKKZ8r4OV36VRcd42 connerohnesorge@xps-nixos"
+  ];
+in
+  delib.module {
+    name = "connerohnesorge";
+
+    # macOS (Darwin) user configuration
+    darwin.always = {myconfig, ...}: let
+      inherit (myconfig.constants) username;
+    in {
+      # Nix daemon configuration for macOS
+      nix = {
+        settings = {
+          # Enable modern Nix features
+          lazy-trees = true;
+          experimental-features = [
+            "nix-command" # New nix CLI commands
+            "flakes" # Nix flakes support
+          ];
+
+          # Users allowed to perform privileged Nix operations
+          trusted-users = [
+            "root"
+            "@wheel" # All wheel group members
+            username
+          ];
+
+          # Users allowed to use Nix daemon
+          allowed-users = [
+            "root"
+            "@wheel"
+            username
+          ];
+
+          # Binary cache configuration for faster builds
+          substituters = [
+            "https://cache.nixos.org"
+          ];
+          trusted-public-keys = [
+            "cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
+          ];
+        };
+      };
+
+      # User and group creation
+      users = {
+        groups.${username} = {};
+        users.${username} = {
+          home = "/Users/${username}"; # macOS home directory convention
+        };
+      };
+    };
+
+    # NixOS user configuration with full system integration
+    nixos.always = {myconfig, ...}: let
+      inherit (myconfig.constants) username;
+    in {
+      # NixOS Nix daemon configuration (forced to override defaults)
+      nix = pkgs.lib.mkForce {
+        settings = {
+          # Performance optimizations
+          max-jobs = 8; # Parallel build jobs
+          lazy-trees = true; # Lazy evaluation for better performance
+
+          # Enable modern Nix features
+          experimental-features = [
+            "nix-command"
+            "flakes"
+          ];
+
+          # Privileged user configuration
+          trusted-users = [
+            "root"
+            "@wheel"
+            "${myconfig.constants.username}"
+          ];
+
+          # Allowed user configuration
+          allowed-users = [
+            "root"
+            "@wheel"
+            "${myconfig.constants.username}"
+          ];
+
+          # Binary cache for faster package installation
+          substituters = [
+            "https://cache.nixos.org"
+          ];
+          trusted-public-keys = [
+            "cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
+          ];
+        };
+      };
+
+      # User and group management
+      users = {
+        # Create user's primary group
+        groups.${username} = {};
+
+        # Create NordVPN group for VPN access
+        groups.nordvpn = {};
+
+        # Main user account configuration
+        users.${username} = {
+          home = "/home/${username}"; # Linux home directory convention
+          isNormalUser = true; # Standard user (not system account)
+
+          # System group memberships for required services
+          extraGroups = [
+            "networkmanager" # Network configuration access
+            "wheel" # Sudo privileges
+            "docker" # Docker daemon access
+            "users" # Standard users group
+            "nordvpn" # VPN access
+            "uinput" # Input device access
+            "input" # Input device access
+            "ydotool" # Ydotool access
+          ];
+
+          # SSH public key for remote access
+          openssh.authorizedKeys = {
+            inherit keys;
+          };
+
+          # Set default shell to zsh
+          shell = pkgs.zsh;
+        };
+        users.root = pkgs.lib.mkDefault {
+          home = "/root";
+          isNormalUser = true;
+          openssh.authorizedKeys = {
+            inherit keys;
+          };
+        };
+      };
+
+      # Note: Custom nix.conf generation is available but currently disabled
+      # The commented section below shows how to generate custom nix configuration
+      # if needed for specialized setups
+      # environment = {
+      #   etc."nix/nix.custom.conf".text = let
+      #     # This function converts an attribute set to Nix configuration lines
+      #     settingsToConf = settings:
+      #       pkgs.lib.concatStringsSep "\n" (
+      #         pkgs.lib.mapAttrsToList (
+      #           name: value: "${name} = ${
+      #             if builtins.isBool value
+      #             then pkgs.lib.boolToString value
+      #             else if builtins.isInt value
+      #             then toString value
+      #             else if builtins.isList value
+      #             then pkgs.lib.concatMapStringsSep " " (x: "${toString x}") value
+      #             else if builtins.isString value
+      #             then value
+      #             else throw "Unsupported type for nix.conf setting ${name}"
+      #           }"
+      #         )
+      #         settings
+      #       );
+      #   in
+      #     # Apply the function to your desired settings
+      #     settingsToConf {
+      #       # Add your nix settings here, for example:
+      #       max-jobs = 8;
+      #       experimental-features = [
+      #         "nix-command"
+      #         "flakes"
+      #       ];
+      #       trusted-users = [
+      #         "root"
+      #         "@wheel"
+      #         "connerohnesorge"
+      #       ];
+      #       allowed-users = [
+      #         "root"
+      #         "@wheel"
+      #         "connerohnesorge"
+      #       ];
+      #     };
+      # };
+    };
+  }
diff --git a/modules/features/amd.nix b/modules/features/amd.nix
new file mode 100644
index 00000000..773df83c
--- /dev/null
+++ b/modules/features/amd.nix
@@ -0,0 +1,43 @@
+{delib, ...}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.amd";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      # Load amd driver for Xorg and Wayland
+      hardware = {
+        cpu.amd.updateMicrocode = true;
+        amdgpu.opencl.enable = true;
+        graphics = {
+          enable = true;
+          enable32Bit = true;
+        };
+      };
+
+      services = {
+        displayManager = {
+          gdm.enable = true;
+        };
+        ## Graphics
+        xserver = {
+          enable = true;
+          videoDrivers = ["amdgpu"];
+          xkb = {
+            layout = "us";
+            variant = "";
+          };
+        };
+      };
+    };
+
+    darwin.ifEnabled = {
+      # AMD GPU support not applicable on Darwin/macOS
+    };
+
+    home.ifEnabled = {
+      # AMD-specific home configuration can be added here if needed
+    };
+  }
diff --git a/modules/features/audio.nix b/modules/features/audio.nix
new file mode 100644
index 00000000..d7dd72c6
--- /dev/null
+++ b/modules/features/audio.nix
@@ -0,0 +1,33 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.audio";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = with pkgs; [
+        ## Audio
+        alsa-oss
+        alsa-utils
+        alsa-lib
+        sox
+      ];
+
+      services = {
+        ## Audio
+        pipewire = {
+          enable = true;
+          alsa.enable = true;
+          alsa.support32Bit = true;
+          pulse.enable = true;
+          jack.enable = true;
+        };
+      };
+    };
+  }
diff --git a/modules/features/bluetooth.nix b/modules/features/bluetooth.nix
new file mode 100644
index 00000000..1ad1fdc3
--- /dev/null
+++ b/modules/features/bluetooth.nix
@@ -0,0 +1,37 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.bluetooth";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [
+        pkgs.blueman
+      ];
+      services.blueman.enable = true;
+      hardware = {
+        bluetooth = {
+          enable = true;
+          powerOnBoot = true;
+          settings = {
+            General = {
+              Name = "Hello";
+              ControllerMode = "dual";
+              FastConnectable = "true";
+              Experimental = "true";
+              Enable = "Source,Sink,Media,Socket";
+            };
+            Policy = {
+              AutoEnable = "true";
+            };
+          };
+        };
+      };
+    };
+  }
diff --git a/modules/features/darknet.nix b/modules/features/darknet.nix
new file mode 100644
index 00000000..cc52e7f4
--- /dev/null
+++ b/modules/features/darknet.nix
@@ -0,0 +1,15 @@
+{delib, ...}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.darknet";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      services = {
+        tailscale.enable = true;
+        fail2ban.enable = true;
+      };
+    };
+  }
diff --git a/modules/features/engineer.nix b/modules/features/engineer.nix
new file mode 100644
index 00000000..33649aa0
--- /dev/null
+++ b/modules/features/engineer.nix
@@ -0,0 +1,280 @@
+{
+  delib,
+  pkgs,
+  inputs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.engineer";
+
+    nixos.always = {myconfig, ...}: {
+      imports = [
+        inputs.nix-ld.nixosModules.nix-ld
+        inputs.nordvpn.nixosModules.default
+        {
+          services.nordvpn = {
+            enable = true;
+            users = [myconfig.constants.username];
+          };
+        }
+      ];
+    };
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      myconfig = {
+        features = {
+          zshell.enable = true;
+        };
+        programs = {
+          # pdf2md.enable = true;
+          xlaude.enable = true;
+          zlaude.enable = true;
+          klaude.enable = true;
+          cldk.enable = true;
+          cldo.enable = true;
+          clds.enable = true;
+          glaude.enable = true;
+          latest.enable = true;
+          ghostty.enable = true;
+          dx.enable = true;
+          cf.enable = true;
+          convert_img.enable = true;
+          catls.enable = true;
+          cmbd.enable = true;
+          nviml.enable = true;
+          nvimf.enable = true;
+        };
+      };
+      fonts.packages = with pkgs; [
+        nerd-fonts.code-new-roman
+        corefonts
+        vista-fonts
+      ];
+      documentation = {
+        enable = true;
+        dev.enable = true;
+        nixos.enable = true;
+        man.enable = true;
+      };
+      environment = {
+        systemPackages = with pkgs;
+          [
+            ## Env
+            nushell
+            dbus
+            upower
+            upower-notify
+            age
+            kubectl
+            nerdctl
+            ktailctl
+            doppler
+            bun
+            file
+            nix-index
+            vscode-langservers-extracted
+            yaml-language-server
+            gcc
+            pkg-config
+            lshw
+            gdb
+            gotestsum
+            luarocks
+            gnupg
+            procps
+            sleek
+            unixtools.xxd
+            ffmpeg
+            tree
+            stdenv.cc
+            xdg-utils
+            zip
+            glibc.dev
+            man-pages
+            man-pages-posix
+            man-db
+            wezterm
+            libcaca
+
+            # VCS
+            git-lfs
+            git-filter-repo
+            jujutsu
+
+            # Apps
+            obsidian
+            brave
+            spotify
+            evince
+            discord
+            telegram-desktop
+            obs-studio
+            eog
+            nemo-with-extensions
+            google-chrome
+            strace
+            altus
+            vlc
+
+            # Communication
+            tailscale
+            dnsutils
+            minicom
+            openvpn
+            cacert
+            arp-scan
+            vdhcoapp
+            usbutils
+            ethtool
+            curl
+            gimp
+
+            # Platforms
+            fh
+            doppler
+            gh
+            tea
+            gh-dash
+            radicle-tui
+            radicle-desktop
+
+            # Emulation
+            docker
+            docker-compose
+            docker-buildx
+            lazydocker
+            nixos-shell
+
+            # Languages (Base for when shell from project is not available)
+            nixd
+            statix
+            nodejs
+            lua-language-server
+            zed-editor
+          ]
+          ++ [
+            inputs.kiro-flake.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.conclaude.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.nix-ai-tools.packages."${pkgs.stdenv.hostPlatform.system}".crush
+            inputs.nix-ai-tools.packages."${pkgs.stdenv.hostPlatform.system}".amp
+            inputs.nordvpn.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.blink.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.blink.packages."${pkgs.stdenv.hostPlatform.system}".blink-fuzzy-lib
+            inputs.fff.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.nix-auth.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.nix-version-search.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.spectr.packages."${pkgs.stdenv.hostPlatform.system}".default
+          ];
+        variables = {
+          EDITOR = "nvim";
+          VISUAL = "nvim";
+          GIT_EDITOR = "nvim";
+          MANPAGER = "nvim +Man!";
+        };
+      };
+
+      programs = {
+        tmux.enable = true;
+        nix-ld.dev.enable = true;
+        nix-ld.libraries = with pkgs; [
+          stdenv.cc.cc.lib
+          zlib
+        ];
+        direnv.enable = true;
+        direnv.nix-direnv.enable = true;
+        ssh = {
+          extraConfig = ''
+            SetEnv TERM=xterm-256color
+          '';
+        };
+        zsh.enable = true;
+        ssh = {
+          askPassword = pkgs.lib.mkForce "${pkgs.seahorse}/libexec/seahorse/ssh-askpass";
+        };
+        nh = {
+          enable = true;
+          package = pkgs.nh;
+          clean.enable = true;
+          clean.extraArgs = "--keep-since 4d --keep 3";
+          flake = "/home/${myconfig.constants.username}/dotfiles";
+        };
+      };
+
+      virtualisation = {
+        docker = {
+          enable = true;
+          extraPackages = [pkgs.docker-buildx];
+        };
+        containerd = {
+          enable = true;
+        };
+      };
+
+      security.rtkit.enable = true;
+    };
+
+    darwin.ifEnabled = {
+      myconfig = {
+        features.zshell.enable = true;
+        programs = {
+          dx.enable = true;
+          ghostty.enable = true;
+          zlaude.enable = true;
+          clds.enable = true;
+          cldk.enable = true;
+          cldo.enable = true;
+          cf.enable = true;
+          klaude.enable = true;
+          nvimf.enable = true;
+          latest.enable = true;
+        };
+      };
+      environment = {
+        systemPackages = with pkgs; [
+          spicetify-cli
+          python313Packages.huggingface-hub
+          sleek
+          tree-sitter
+          unixtools.xxd
+          tree
+          sad
+          gnumake
+          vscode-langservers-extracted
+          bun
+          podman
+          openssl
+
+          # VCS
+          git-filter-repo
+
+          # Platforms
+          flyctl
+          fh
+          gh
+          tea
+
+          # Languages
+          nixd
+          nodejs
+          lua-language-server
+
+          # Nix tools
+          inputs.nix-auth.packages."${pkgs.stdenv.hostPlatform.system}".default
+          inputs.nix-ai-tools.packages."${pkgs.stdenv.hostPlatform.system}".crush
+          inputs.conclaude.packages."${pkgs.stdenv.hostPlatform.system}".default
+          inputs.spectr.packages."${pkgs.stdenv.hostPlatform.system}".default
+          inputs.ovim.packages."${pkgs.stdenv.hostPlatform.system}".default
+        ];
+        variables = {
+          EDITOR = "nvim";
+          VISUAL = "nvim";
+          GIT_EDITOR = "nvim";
+          MANPAGER = "nvim +Man!";
+        };
+      };
+    };
+  }
diff --git a/modules/features/hyprland.nix b/modules/features/hyprland.nix
new file mode 100644
index 00000000..a3306b9c
--- /dev/null
+++ b/modules/features/hyprland.nix
@@ -0,0 +1,180 @@
+{
+  delib,
+  pkgs,
+  inputs,
+  lib,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.hyprland";
+
+    options = singleEnableOption false;
+    nixos.ifEnabled = {
+      myconfig.programs = {
+        ghostty.enable = true;
+        explorer.enable = true;
+        hyprss.enable = true;
+      };
+      environment = {
+        systemPackages =
+          [
+            inputs.ghostty.packages."${pkgs.stdenv.hostPlatform.system}".default
+            inputs.hyprland.packages."${pkgs.stdenv.hostPlatform.system}".default
+            (pkgs.rofi.override {
+              plugins = [
+                pkgs.rofi-rbw
+                pkgs.rofi-calc
+              ];
+            })
+          ]
+          ++ (with pkgs; [
+            evince
+            kdePackages.konsole
+            wl-clip-persist
+            hyprcursor
+            hyprkeys
+            hyprpaper
+            playerctl
+            hyprsunset # Needs cc at runtime
+            stdenv.cc
+            xmlstarlet
+            hyprwayland-scanner
+            hyprutils
+            wl-clipboard
+            hyprnotify
+            uwsm
+            grimblast
+            grim
+            slurp
+            kitty
+            dunst
+            brightnessctl
+            hyprls
+            swaynotificationcenter
+            gnome-control-center
+            hyprpicker
+            gpu-screen-recorder
+            ffmpegthumbnailer
+            pipewire
+          ]);
+      };
+
+      hardware = {
+        uinput.enable = true;
+        graphics = {
+          extraPackages = with pkgs; [
+            mesa
+          ];
+        };
+      };
+
+      programs = {
+        dconf = {
+          enable = true;
+          profiles.user.databases = [
+            {
+              settings."org/gnome/desktop/interface" = {
+                gtk-theme = "Adwaita";
+                icon-theme = "Flat-Remix-Red-Dark";
+                font-name = "Noto Sans Medium 11";
+                document-font-name = "Noto Sans Medium 11";
+                monospace-font-name = "Noto Sans Mono Medium 11";
+              };
+            }
+          ];
+        };
+        ydotool.enable = true;
+        hyprland = {
+          package = inputs.hyprland.packages.${pkgs.stdenv.hostPlatform.system}.default;
+          portalPackage = inputs.hyprland.packages.${pkgs.stdenv.hostPlatform.system}.xdg-desktop-portal-hyprland;
+          enable = true;
+          # withUWSM = true;
+          xwayland.enable = true;
+        };
+      };
+
+      security = {
+        pam.services = {
+          sddm.enableGnomeKeyring = true;
+          gdm-password.enableGnomeKeyring = true;
+          gdm.enableGnomeKeyring = true;
+        };
+      };
+
+      services = {
+        gnome.gnome-keyring.enable = true;
+        desktopManager.gnome.enable = true;
+        gvfs.enable = true; # Mount, trash, and other functionalities
+        tumbler.enable = true; # Thumbnails
+        dbus = {
+          enable = true;
+          implementation = "broker";
+        };
+        upower.enable = true;
+        xserver = {
+          enable = true;
+        };
+        displayManager.gdm = {
+          enable = lib.mkDefault true;
+        };
+      };
+
+      xdg = {
+        menus.enable = true;
+        portal = {
+          enable = true;
+          wlr.enable = true;
+          extraPortals = [inputs.hyprland.packages.${pkgs.stdenv.hostPlatform.system}.xdg-desktop-portal-hyprland];
+
+          config.hyprland = {
+            default = [
+              "hyprland"
+            ];
+            "org.freedesktop.impl.portal.FileChooser" = "hyprland";
+          };
+        };
+        mime = {
+          enable = true;
+
+          defaultApplications = {
+            "x-scheme-handler/about" = "zen.desktop";
+            "x-scheme-handler/unknown" = "zen.desktop";
+            "x-scheme-handler/http" = "zen.desktop";
+            "x-scheme-handler/https" = "zen.desktop";
+            # PDF
+            "application/pdf" = "org.gnome.Evince.desktop";
+            # PNG, JPG
+            "image/png" = "org.gnome.Loupe.desktop";
+            "image/jpeg" = "org.gnome.Loupe.desktop";
+            "image/ppm" = "org.gnome.Loupe.desktop";
+            # Text
+            "text/javascript" = lib.mkDefault "nvim.desktop";
+            "text/rust" = lib.mkDefault "nvim.desktop";
+            "text/x-python" = lib.mkDefault "nvim.desktop";
+            "text/x-java-source" = lib.mkDefault "nvim.desktop";
+            "text/x-c" = lib.mkDefault "nvim.desktop";
+            "text/x-go" = lib.mkDefault "nvim.desktop";
+            "text/x-nix" = lib.mkDefault "nvim.desktop";
+            "text/x-ocaml" = lib.mkDefault "nvim.desktop";
+            "text/x-scala" = lib.mkDefault "nvim.desktop";
+            "text/x-tex" = lib.mkDefault "nvim.desktop";
+            "text/x-matlab" = lib.mkDefault "nvim.desktop";
+            "text/x-meson" = lib.mkDefault "nvim.desktop";
+            "text/x-dart" = lib.mkDefault "nvim.desktop";
+            "text/x-readme" = lib.mkDefault "nvim.desktop";
+            "text/x-sh" = lib.mkDefault "nvim.desktop";
+            "text/x-nushell" = lib.mkDefault "nvim.desktop";
+            "text/html" = lib.mkDefault "zen.desktop";
+            # Directories
+            "inode/directory" = "org.kde.dolphin.desktop";
+            "x-scheme-handler/file" = "org.kde.dolphin.desktop";
+            "application/octet-stream" = "org.kde.dolphin.desktop";
+            # .txt
+            "text/plain" = "nvim.desktop";
+          };
+        };
+      };
+    };
+  }
diff --git a/modules/features/nvidia.nix b/modules/features/nvidia.nix
new file mode 100644
index 00000000..4567bd0b
--- /dev/null
+++ b/modules/features/nvidia.nix
@@ -0,0 +1,70 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.nvidia";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      # Load nvidia driver for Xorg and Wayland
+      hardware = {
+        nvidia-container-toolkit.enable = true;
+        nvidia = {
+          open = false;
+          prime = {
+            reverseSync.enable = true;
+            offload = {
+              enable = true;
+              enableOffloadCmd = true;
+            };
+          };
+          powerManagement = {
+            # Enable NVIDIA power management.
+            enable = true;
+
+            # Enable dynamic power management.
+            finegrained = true;
+          };
+        };
+        graphics = {
+          enable = true;
+          enable32Bit = true;
+        };
+      };
+
+      virtualisation = {
+        docker = {
+          enable = true;
+        };
+      };
+
+      services = {
+        displayManager = {
+          gdm.enable = true;
+        };
+        ## Graphics
+        xserver = {
+          enable = true;
+          videoDrivers = ["nvidia"];
+          xkb = {
+            layout = "us";
+            variant = "";
+          };
+        };
+      };
+
+      environment = {
+        systemPackages = with pkgs; [
+          nvtopPackages.full
+        ];
+        variables = {
+          LIBVA_DRIVER_NAME = "nvidia";
+        };
+      };
+    };
+  }
diff --git a/modules/features/ollama.nix b/modules/features/ollama.nix
new file mode 100644
index 00000000..672bd483
--- /dev/null
+++ b/modules/features/ollama.nix
@@ -0,0 +1,31 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.ollama";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = with pkgs; [
+        ollama
+      ];
+
+      services = {
+        ollama = {
+          enable = true;
+          loadModels = ["gpt-oss:20b"];
+          package =
+            if myconfig.features.amd.enable
+            then pkgs.ollama-rocm
+            else if myconfig.features.nvidia.enable
+            then pkgs.ollama-cuda
+            else pkgs.ollama-cpu;
+        };
+      };
+    };
+  }
diff --git a/modules/features/power-efficient.nix b/modules/features/power-efficient.nix
new file mode 100644
index 00000000..55913086
--- /dev/null
+++ b/modules/features/power-efficient.nix
@@ -0,0 +1,15 @@
+{delib, ...}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.power-efficient";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      services = {
+        tlp.enable = true;
+        power-profiles-daemon.enable = false;
+      };
+    };
+  }
diff --git a/modules/features/secrets.nix b/modules/features/secrets.nix
new file mode 100644
index 00000000..1eb0f5b6
--- /dev/null
+++ b/modules/features/secrets.nix
@@ -0,0 +1,19 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.secrets";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = with pkgs; [
+        # sops
+        proton-pass
+      ];
+    };
+  }
diff --git a/modules/features/student.nix b/modules/features/student.nix
new file mode 100644
index 00000000..c91f8455
--- /dev/null
+++ b/modules/features/student.nix
@@ -0,0 +1,26 @@
+{
+  delib,
+  pkgs,
+  inputs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.student";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment = {
+        systemPackages = with pkgs; [
+          libreoffice
+          anki-bin
+          teams-for-linux
+        ];
+      };
+    };
+
+    darwin.ifEnabled = {
+    };
+  }
diff --git a/modules/features/vitis.nix b/modules/features/vitis.nix
new file mode 100644
index 00000000..5b78037b
--- /dev/null
+++ b/modules/features/vitis.nix
@@ -0,0 +1,58 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "features.vitis";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      # Enable virtualization
+      virtualisation.libvirtd = {
+        enable = true;
+        qemu = {
+          package = pkgs.qemu_kvm;
+          runAsRoot = true;
+          swtpm.enable = true;
+          ovmf = {
+            enable = true;
+            packages = [pkgs.OVMFFull.fd];
+          };
+        };
+      };
+      networking.firewall.trustedInterfaces = ["virbr0"];
+
+      # Add your user to libvirtd group
+      users.users."${myconfig.constants.username}" = {
+        extraGroups = ["libvirtd"];
+      };
+
+      # Install virt-manager and tools
+      environment.systemPackages = with pkgs; [
+        virt-manager
+        virt-viewer
+        spice
+        spice-gtk
+        spice-protocol
+        win-virtio
+        win-spice
+      ];
+
+      # Enable dconf for virt-manager settings
+      programs.dconf.enable = true;
+
+      # Optional: Enable nested virtualization
+      boot.kernelModules = ["kvm-intel" "kvm-amd"];
+      boot.extraModprobeConfig = ''
+        options kvm_intel nested=1
+        options kvm_amd nested=1
+      '';
+    };
+
+    darwin.ifEnabled = {
+    };
+  }
diff --git a/modules/features/zshell.nix b/modules/features/zshell.nix
new file mode 100644
index 00000000..879a4655
--- /dev/null
+++ b/modules/features/zshell.nix
@@ -0,0 +1,61 @@
+{
+  delib,
+  pkgs,
+  inputs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  systemPackages = with pkgs; [
+    zinit
+    starship
+    direnv
+    nix-direnv
+    bat
+    wget
+    fd
+    jq
+    fzf
+    zellij
+    atuin
+    zoxide
+    eza
+    delta
+    unzip
+    htop
+    tealdeer
+    ripgrep
+    stow
+    carapace
+    uv
+    git
+    man
+    cmake
+    yq
+    graphite-cli
+    lsof
+    gdu
+    timewarrior # .local/share/timewarrior
+    # Editor
+    neovim
+    tree-sitter
+    sad
+  ];
+in
+  delib.module {
+    name = "features.zshell";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment = {
+        inherit systemPackages;
+      };
+    };
+
+    darwin.ifEnabled = {
+      environment = {
+        inherit systemPackages;
+      };
+    };
+  }
diff --git a/modules/home/commons/default.nix b/modules/home/commons/default.nix
deleted file mode 100644
index 5fa4f15a..00000000
--- a/modules/home/commons/default.nix
+++ /dev/null
@@ -1,20 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  system, # The system architecture for this host (eg. `x86_64-linux`).
-  target, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  format, # A normalized name for the system target (eg. `iso`).
-  virtual, # A boolean to determine whether this system is a virtual target using nixos-generators.
-  systems, # An attribute map of your defined hosts.
-  # All other arguments come from the module system.
-  config,
-  ...
-}: {
-}
diff --git a/modules/programs/catls/.gitignore b/modules/programs/catls/.gitignore
new file mode 100644
index 00000000..bee8a64b
--- /dev/null
+++ b/modules/programs/catls/.gitignore
@@ -0,0 +1 @@
+__pycache__
diff --git a/modules/programs/catls/catls.nix b/modules/programs/catls/catls.nix
new file mode 100644
index 00000000..c413cf9a
--- /dev/null
+++ b/modules/programs/catls/catls.nix
@@ -0,0 +1,39 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+  program = pkgs.buildGoModule {
+    pname = "catls";
+    version = "2.0.0";
+
+    src = ./.;
+
+    vendorHash = "sha256-m5mBubfbXXqXKsygF5j7cHEY+bXhAMcXUts5KBKoLzM=";
+
+    meta = with pkgs.lib; {
+      description = "Enhanced file listing utility with XML, Markdown, and JSON output";
+      homepage = "https://github.com/connerosiu/dotfiles";
+      license = licenses.mit;
+      maintainers = [];
+    };
+  };
+in
+  delib.module {
+    name = "programs.catls";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [
+        program
+      ];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [
+        program
+      ];
+    };
+  }
diff --git a/modules/programs/catls/cmd/root.go b/modules/programs/catls/cmd/root.go
new file mode 100644
index 00000000..1ffe84f2
--- /dev/null
+++ b/modules/programs/catls/cmd/root.go
@@ -0,0 +1,157 @@
+// Package cmd contains the root command for the catls program.
+package cmd
+
+import (
+	"context"
+	"fmt"
+	"os"
+	"strings"
+
+	"github.com/connerosiu/dotfiles/modules/programs/catls/internal/catls"
+	"github.com/spf13/cobra"
+)
+
+var rootCmd = &cobra.Command{
+	Use:   "catls [directory] [files...]",
+	Short: "List files and their contents",
+	Long: `catls recursively lists files and displays their contents in XML format.
+It supports filtering by glob patterns, ignoring directories, and various output options.`,
+	RunE: runCatls,
+}
+
+// Execute runs the root command.
+func Execute() {
+	if err := rootCmd.Execute(); err != nil {
+		os.Exit(1)
+	}
+}
+
+func init() {
+	setupFlags()
+}
+
+func setupFlags() {
+	flags := rootCmd.Flags()
+
+	flags.BoolP(
+		"all",
+		"a",
+		false,
+		"Include hidden files",
+	)
+	flags.BoolP(
+		"recursive",
+		"r",
+		false,
+		"Recursively list files in subdirectories",
+	)
+	flags.StringSlice(
+		"ignore-dir",
+		defaultIgnoreDirs(),
+		"Ignore directory DIR (can be used multiple times)",
+	)
+	flags.StringSlice(
+		"globs",
+		nil,
+		"Only include files matching glob pattern (can be used multiple times)",
+	)
+	flags.StringSlice(
+		"ignore-globs",
+		nil,
+		"Ignore files matching glob pattern (can be used multiple times)",
+	)
+	flags.String(
+		"pattern",
+		"",
+		"Only show lines matching glob PATTERN",
+	)
+	flags.BoolP(
+		"line-numbers",
+		"n",
+		false,
+		"Show line numbers",
+	)
+	flags.Bool(
+		"debug",
+		false,
+		"Enable debug output",
+	)
+	flags.Bool(
+		"omit-bins",
+		false,
+		"Skip binary files in output",
+	)
+	flags.StringP(
+		"format",
+		"f",
+		"xml",
+		"Output format: xml, json, markdown",
+	)
+	flags.String(
+		"relative-to",
+		"",
+		"Display paths relative to this directory (default: scan directory)",
+	)
+}
+
+func defaultIgnoreDirs() []string {
+	return []string{
+		"node_modules",
+		".direnv",
+		"build",
+		"dist",
+		"target",
+		"venv",
+		"env",
+		".env",
+		"vendor",
+		".bundle",
+		"coverage",
+		"static",
+	}
+}
+
+func runCatls(cmd *cobra.Command, args []string) error {
+	cfg, err := buildConfig(cmd, args)
+	if err != nil {
+		return err
+	}
+
+	ctx := context.Background()
+	app := catls.New(cfg)
+	return app.Run(ctx)
+}
+
+func buildConfig(cmd *cobra.Command, args []string) (*catls.Config, error) {
+	flags := cmd.Flags()
+
+	cfg := &catls.Config{
+		Directory: ".",
+	}
+
+	if len(args) > 0 {
+		cfg.Directory = args[0]
+		cfg.Files = args[1:]
+	}
+
+	cfg.ShowAll, _ = flags.GetBool("all")
+	cfg.Recursive, _ = flags.GetBool("recursive")
+	cfg.Debug, _ = flags.GetBool("debug")
+	cfg.ShowLineNumbers, _ = flags.GetBool("line-numbers")
+	cfg.OmitBins, _ = flags.GetBool("omit-bins")
+	cfg.ContentPattern, _ = flags.GetString("pattern")
+	cfg.RelativeTo, _ = flags.GetString("relative-to")
+	cfg.IgnoreDir, _ = flags.GetStringSlice("ignore-dir")
+	cfg.Globs, _ = flags.GetStringSlice("globs")
+	cfg.IgnoreGlobs, _ = flags.GetStringSlice("ignore-globs")
+
+	// Handle output format
+	formatStr, _ := flags.GetString("format")
+	cfg.OutputFormat = catls.OutputFormat(formatStr)
+	if !cfg.OutputFormat.IsValid() {
+		return nil, fmt.Errorf("unsupported output format: %s (supported: %s)", 
+			formatStr, strings.Join(catls.GetSupportedFormats(), ", "))
+	}
+
+	return cfg, nil
+}
diff --git a/modules/programs/catls/cmd/root_test.go b/modules/programs/catls/cmd/root_test.go
new file mode 100644
index 00000000..313ab2bb
--- /dev/null
+++ b/modules/programs/catls/cmd/root_test.go
@@ -0,0 +1,144 @@
+package cmd
+
+import (
+	"testing"
+
+	"github.com/spf13/cobra"
+	"github.com/spf13/pflag"
+)
+
+// createTestFlags creates a fresh set of flags for testing
+func createTestFlags() *pflag.FlagSet {
+	flags := pflag.NewFlagSet("test", pflag.ContinueOnError)
+
+	flags.BoolP("all", "a", false, "Include hidden files")
+	flags.BoolP("recursive", "r", false, "Recursively list files in subdirectories")
+	flags.StringSlice("ignore-dir", defaultIgnoreDirs(), "Ignore directory DIR")
+	flags.StringSlice("globs", nil, "Only include files matching glob pattern")
+	flags.StringSlice("ignore-globs", nil, "Ignore files matching glob pattern")
+	flags.String("pattern", "", "Only show lines matching glob PATTERN")
+	flags.BoolP("line-numbers", "n", false, "Show line numbers")
+	flags.Bool("debug", false, "Enable debug output")
+	flags.Bool("omit-bins", false, "Skip binary files in output")
+	flags.StringP("format", "f", "xml", "Output format: xml, json, markdown")
+	flags.String("relative-to", "", "Display paths relative to this directory")
+
+	return flags
+}
+
+func TestBuildConfig_RelativeToFlag(t *testing.T) {
+	tests := []struct {
+		name           string
+		args           []string
+		flags          map[string]string
+		wantRelativeTo string
+		wantDirectory  string
+	}{
+		{
+			name:           "no relative-to flag uses default",
+			args:           []string{},
+			flags:          map[string]string{},
+			wantRelativeTo: "",
+			wantDirectory:  ".",
+		},
+		{
+			name:           "relative-to flag set to current directory",
+			args:           []string{},
+			flags:          map[string]string{"relative-to": "."},
+			wantRelativeTo: ".",
+			wantDirectory:  ".",
+		},
+		{
+			name:           "relative-to flag set to absolute path",
+			args:           []string{},
+			flags:          map[string]string{"relative-to": "/home/user"},
+			wantRelativeTo: "/home/user",
+			wantDirectory:  ".",
+		},
+		{
+			name:           "relative-to with directory arg",
+			args:           []string{"/some/path"},
+			flags:          map[string]string{"relative-to": "/home/user"},
+			wantRelativeTo: "/home/user",
+			wantDirectory:  "/some/path",
+		},
+		{
+			name:           "relative-to with relative path",
+			args:           []string{"./src"},
+			flags:          map[string]string{"relative-to": "./"},
+			wantRelativeTo: "./",
+			wantDirectory:  "./src",
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			// Create a new command with fresh flags for each test
+			cmd := &cobra.Command{
+				Use: "test",
+			}
+			cmd.Flags().AddFlagSet(createTestFlags())
+
+			// Set flags
+			for name, value := range tt.flags {
+				if err := cmd.Flags().Set(name, value); err != nil {
+					t.Fatalf("failed to set flag %s: %v", name, err)
+				}
+			}
+
+			cfg, err := buildConfig(cmd, tt.args)
+			if err != nil {
+				t.Fatalf("buildConfig() unexpected error: %v", err)
+			}
+
+			if cfg.RelativeTo != tt.wantRelativeTo {
+				t.Errorf("buildConfig().RelativeTo = %v, want %v", cfg.RelativeTo, tt.wantRelativeTo)
+			}
+
+			if cfg.Directory != tt.wantDirectory {
+				t.Errorf("buildConfig().Directory = %v, want %v", cfg.Directory, tt.wantDirectory)
+			}
+		})
+	}
+}
+
+func TestBuildConfig_RelativeToWithOtherFlags(t *testing.T) {
+	cmd := &cobra.Command{
+		Use: "test",
+	}
+	cmd.Flags().AddFlagSet(createTestFlags())
+
+	// Set multiple flags
+	flags := map[string]string{
+		"relative-to": "/home/user/project",
+		"format":      "json",
+		"recursive":   "true",
+	}
+
+	for name, value := range flags {
+		if err := cmd.Flags().Set(name, value); err != nil {
+			t.Fatalf("failed to set flag %s: %v", name, err)
+		}
+	}
+
+	cfg, err := buildConfig(cmd, []string{"./src"})
+	if err != nil {
+		t.Fatalf("buildConfig() unexpected error: %v", err)
+	}
+
+	if cfg.RelativeTo != "/home/user/project" {
+		t.Errorf("RelativeTo = %v, want /home/user/project", cfg.RelativeTo)
+	}
+
+	if cfg.Directory != "./src" {
+		t.Errorf("Directory = %v, want ./src", cfg.Directory)
+	}
+
+	if !cfg.Recursive {
+		t.Errorf("Recursive = false, want true")
+	}
+
+	if string(cfg.OutputFormat) != "json" {
+		t.Errorf("OutputFormat = %v, want json", cfg.OutputFormat)
+	}
+}
diff --git a/modules/programs/catls/go.mod b/modules/programs/catls/go.mod
new file mode 100644
index 00000000..2b33e383
--- /dev/null
+++ b/modules/programs/catls/go.mod
@@ -0,0 +1,9 @@
+module github.com/connerosiu/dotfiles/modules/programs/catls
+
+go 1.24.4
+
+require (
+	github.com/inconshreveable/mousetrap v1.1.0 // indirect
+	github.com/spf13/cobra v1.9.1 // indirect
+	github.com/spf13/pflag v1.0.6 // indirect
+)
diff --git a/modules/programs/catls/go.sum b/modules/programs/catls/go.sum
new file mode 100644
index 00000000..ffae55e3
--- /dev/null
+++ b/modules/programs/catls/go.sum
@@ -0,0 +1,10 @@
+github.com/cpuguy83/go-md2man/v2 v2.0.6/go.mod h1:oOW0eioCTA6cOiMLiUPZOpcVxMig6NIQQ7OS05n1F4g=
+github.com/inconshreveable/mousetrap v1.1.0 h1:wN+x4NVGpMsO7ErUn/mUI3vEoE6Jt13X2s0bqwp9tc8=
+github.com/inconshreveable/mousetrap v1.1.0/go.mod h1:vpF70FUmC8bwa3OWnCshd2FqLfsEA9PFc4w1p2J65bw=
+github.com/russross/blackfriday/v2 v2.1.0/go.mod h1:+Rmxgy9KzJVeS9/2gXHxylqXiyQDYRxCVz55jmeOWTM=
+github.com/spf13/cobra v1.9.1 h1:CXSaggrXdbHK9CF+8ywj8Amf7PBRmPCOJugH954Nnlo=
+github.com/spf13/cobra v1.9.1/go.mod h1:nDyEzZ8ogv936Cinf6g1RU9MRY64Ir93oCnqb9wxYW0=
+github.com/spf13/pflag v1.0.6 h1:jFzHGLGAlb3ruxLB8MhbI6A8+AQX/2eW4qeyNZXNp2o=
+github.com/spf13/pflag v1.0.6/go.mod h1:McXfInJRrz4CZXVZOBLb0bTZqETkiAhM9Iw0y3An2Bg=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
diff --git a/modules/programs/catls/internal/catls/catls.go b/modules/programs/catls/internal/catls/catls.go
new file mode 100644
index 00000000..fdd68790
--- /dev/null
+++ b/modules/programs/catls/internal/catls/catls.go
@@ -0,0 +1,175 @@
+// Package catls provides the core functionality for the catls application.
+package catls
+
+import (
+	"context"
+	"fmt"
+	"os"
+	"path/filepath"
+	"strings"
+
+	"github.com/connerosiu/dotfiles/modules/programs/catls/internal/scanner"
+)
+
+// Config holds all configuration options for catls.
+type Config struct {
+	Directory       string
+	Files           []string
+	ShowAll         bool
+	Recursive       bool
+	Debug           bool
+	IgnoreDir       []string
+	Globs           []string
+	IgnoreGlobs     []string
+	ContentPattern  string
+	ShowLineNumbers bool
+	OmitBins        bool
+	OutputFormat    OutputFormat
+	RelativeTo      string
+}
+
+// defaultIgnoreGlobs returns standard ignore patterns.
+func (c *Config) defaultIgnoreGlobs() []string {
+	return []string{
+		".git/*", ".svn/*", ".hg/*",
+		"__pycache__/*", ".pytest_cache/*", ".mypy_cache/*",
+		".tox/*", ".venv/*", ".coverage",
+		".DS_Store", ".idea/*", ".vscode/*",
+		"*_templ.go", "LICENSE", "LICENSE.md", "LICENSE.txt",
+	}
+}
+
+// AllIgnoreGlobs combines default and user-specified ignore patterns.
+func (c *Config) AllIgnoreGlobs() []string {
+	return append(c.defaultIgnoreGlobs(), c.IgnoreGlobs...)
+}
+
+// App represents the main catls application.
+type App struct {
+	cfg       *Config
+	scanner   *scanner.Scanner
+	filter    *FileFilter
+	processor *FileProcessor
+	output    OutputFormatter
+}
+
+// New creates a new catls application instance.
+func New(cfg *Config) *App {
+	output, err := NewOutputFormatter(cfg.OutputFormat)
+	if err != nil {
+		// This should not happen if config validation is working correctly
+		panic(fmt.Sprintf("failed to create output formatter: %v", err))
+	}
+
+	return &App{
+		cfg:       cfg,
+		scanner:   scanner.New(),
+		filter:    NewFileFilter(cfg),
+		processor: NewFileProcessor(),
+		output:    output,
+	}
+}
+
+// Run executes the catls operation.
+func (a *App) Run(ctx context.Context) error {
+	if err := a.validateConfig(); err != nil {
+		return err
+	}
+
+	if a.cfg.Debug {
+		fmt.Fprintf(os.Stderr, "Debug: Ignoring directories: %v\n", a.cfg.IgnoreDir)
+	}
+
+	// Add files to globs if specified
+	a.addFilesToGlobs()
+
+	// Scan for files
+	scanCfg := scanner.Config{
+		Directory:   a.cfg.Directory,
+		ShowAll:     a.cfg.ShowAll,
+		Recursive:   a.cfg.Recursive,
+		IgnoreDir:   a.cfg.IgnoreDir,
+		IgnoreGlobs: a.cfg.AllIgnoreGlobs(),
+		Debug:       a.cfg.Debug,
+		RelativeTo:  a.cfg.RelativeTo,
+	}
+
+	files, err := a.scanner.Scan(ctx, scanCfg)
+	if err != nil {
+		return fmt.Errorf("failed to scan files: %w", err)
+	}
+
+	if len(files) == 0 {
+		fmt.Printf("No files found in directory: %s\n", a.cfg.Directory)
+		return nil
+	}
+
+	// Process and output files
+	return a.processAndOutput(ctx, files)
+}
+
+// validateConfig ensures the configuration is valid.
+func (a *App) validateConfig() error {
+	if _, err := os.Stat(a.cfg.Directory); os.IsNotExist(err) {
+		return fmt.Errorf("directory '%s' does not exist", a.cfg.Directory)
+	}
+
+	// Normalize ignore directories
+	for i, dir := range a.cfg.IgnoreDir {
+		a.cfg.IgnoreDir[i] = strings.TrimSuffix(dir, "/")
+	}
+
+	return nil
+}
+
+// addFilesToGlobs converts specific file arguments to glob patterns.
+func (a *App) addFilesToGlobs() {
+	for _, file := range a.cfg.Files {
+		if _, err := os.Stat(file); err == nil {
+			// File exists, use its basename as pattern
+			a.cfg.Globs = append(a.cfg.Globs, filepath.Base(file))
+		} else {
+			// File doesn't exist, treat as pattern
+			a.cfg.Globs = append(a.cfg.Globs, file)
+		}
+	}
+}
+
+// processAndOutput handles file processing and output generation.
+func (a *App) processAndOutput(ctx context.Context, files []scanner.FileInfo) error {
+	// Write header
+	if err := a.output.WriteHeader(ctx); err != nil {
+		return fmt.Errorf("failed to write output header: %w", err)
+	}
+
+	for _, file := range files {
+		select {
+		case <-ctx.Done():
+			return ctx.Err()
+		default:
+		}
+
+		// Apply file filtering
+		if !a.filter.ShouldIncludeFile(file, a.cfg) {
+			continue
+		}
+
+		// Create filter for this specific file processing
+		filter := NewFileFilter(a.cfg)
+		
+		// Process the file
+		processed := a.processor.ProcessFile(file, filter)
+
+		// Write processed file using the output formatter
+		if err := a.output.WriteFile(ctx, processed, a.cfg); err != nil {
+			return fmt.Errorf("failed to write file %s: %w", file.RelPath, err)
+		}
+	}
+
+	// Write footer
+	if err := a.output.WriteFooter(ctx); err != nil {
+		return fmt.Errorf("failed to write output footer: %w", err)
+	}
+
+	return nil
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/catls_test.go b/modules/programs/catls/internal/catls/catls_test.go
new file mode 100644
index 00000000..83633a68
--- /dev/null
+++ b/modules/programs/catls/internal/catls/catls_test.go
@@ -0,0 +1,288 @@
+package catls
+
+import (
+	"bytes"
+	"context"
+	"io"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+)
+
+func TestRelativeToIntegration(t *testing.T) {
+	tests := []struct {
+		name           string
+		setupFiles     map[string]string // path -> content
+		directory      string            // scan directory
+		relativeTo     string            // RelativeTo path
+		wantPathPrefix string            // expected path prefix in output
+	}{
+		{
+			name: "no RelativeTo uses scan directory",
+			setupFiles: map[string]string{
+				"test.txt": "hello",
+			},
+			directory:      "",
+			relativeTo:     "",
+			wantPathPrefix: "test.txt",
+		},
+		{
+			name: "RelativeTo parent directory",
+			setupFiles: map[string]string{
+				"subdir/test.txt": "hello",
+			},
+			directory:      "subdir",
+			relativeTo:     "", // will be set to tmpDir
+			wantPathPrefix: "subdir/test.txt",
+		},
+		{
+			name: "RelativeTo current directory",
+			setupFiles: map[string]string{
+				"test.txt": "hello",
+			},
+			directory:      "",
+			relativeTo:     ".",
+			wantPathPrefix: "test.txt",
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			// Create temp directory
+			tmpDir := t.TempDir()
+
+			// Create test files
+			for path, content := range tt.setupFiles {
+				fullPath := filepath.Join(tmpDir, path)
+				dir := filepath.Dir(fullPath)
+
+				if err := os.MkdirAll(dir, 0755); err != nil {
+					t.Fatalf("failed to create directory %s: %v", dir, err)
+				}
+
+				if err := os.WriteFile(fullPath, []byte(content), 0644); err != nil {
+					t.Fatalf("failed to write file %s: %v", fullPath, err)
+				}
+			}
+
+			// Set up config
+			scanDir := tmpDir
+			if tt.directory != "" {
+				scanDir = filepath.Join(tmpDir, tt.directory)
+			}
+
+			relTo := tt.relativeTo
+			if tt.name == "RelativeTo parent directory" {
+				relTo = tmpDir
+			}
+
+			cfg := &Config{
+				Directory:    scanDir,
+				Recursive:    true,
+				RelativeTo:   relTo,
+				OutputFormat: "xml",
+			}
+
+			// Capture output
+			oldStdout := os.Stdout
+			r, w, _ := os.Pipe()
+			os.Stdout = w
+
+			// Run the application
+			app := New(cfg)
+			err := app.Run(context.Background())
+
+			// Restore stdout
+			w.Close()
+			os.Stdout = oldStdout
+
+			if err != nil {
+				t.Fatalf("Run() unexpected error: %v", err)
+			}
+
+			// Read output
+			var buf bytes.Buffer
+			io.Copy(&buf, r)
+			output := buf.String()
+
+			// Verify the path in output contains expected prefix
+			if !strings.Contains(output, tt.wantPathPrefix) {
+				t.Errorf("output does not contain expected path prefix %q\noutput:\n%s", tt.wantPathPrefix, output)
+			}
+		})
+	}
+}
+
+func TestRelativeToWithNestedDirectories(t *testing.T) {
+	tmpDir := t.TempDir()
+
+	// Create nested directory structure
+	files := map[string]string{
+		"src/main.go":         "package main",
+		"src/lib/utils.go":    "package lib",
+		"tests/main_test.go":  "package main_test",
+		"README.md":           "# Project",
+	}
+
+	for path, content := range files {
+		fullPath := filepath.Join(tmpDir, path)
+		dir := filepath.Dir(fullPath)
+
+		if err := os.MkdirAll(dir, 0755); err != nil {
+			t.Fatalf("failed to create directory %s: %v", dir, err)
+		}
+
+		if err := os.WriteFile(fullPath, []byte(content), 0644); err != nil {
+			t.Fatalf("failed to write file %s: %v", fullPath, err)
+		}
+	}
+
+	t.Run("scan src with relative-to project root", func(t *testing.T) {
+		cfg := &Config{
+			Directory:    filepath.Join(tmpDir, "src"),
+			Recursive:    true,
+			RelativeTo:   tmpDir,
+			OutputFormat: "xml",
+		}
+
+		// Capture output
+		oldStdout := os.Stdout
+		r, w, _ := os.Pipe()
+		os.Stdout = w
+
+		app := New(cfg)
+		err := app.Run(context.Background())
+
+		w.Close()
+		os.Stdout = oldStdout
+
+		if err != nil {
+			t.Fatalf("Run() unexpected error: %v", err)
+		}
+
+		var buf bytes.Buffer
+		io.Copy(&buf, r)
+		output := buf.String()
+
+		// Should contain paths relative to project root
+		expectedPaths := []string{
+			"src/main.go",
+			"src/lib/utils.go",
+		}
+
+		for _, path := range expectedPaths {
+			if !strings.Contains(output, path) {
+				t.Errorf("output should contain path %q\noutput:\n%s", path, output)
+			}
+		}
+
+		// Should NOT contain just "main.go" or "lib/utils.go"
+		if strings.Contains(output, `path="main.go"`) {
+			t.Errorf("output should not contain bare 'main.go' when relative-to is set")
+		}
+	})
+
+	t.Run("scan project with relative-to same as directory", func(t *testing.T) {
+		cfg := &Config{
+			Directory:    tmpDir,
+			Recursive:    true,
+			RelativeTo:   tmpDir,
+			OutputFormat: "xml",
+		}
+
+		// Capture output
+		oldStdout := os.Stdout
+		r, w, _ := os.Pipe()
+		os.Stdout = w
+
+		app := New(cfg)
+		err := app.Run(context.Background())
+
+		w.Close()
+		os.Stdout = oldStdout
+
+		if err != nil {
+			t.Fatalf("Run() unexpected error: %v", err)
+		}
+
+		var buf bytes.Buffer
+		io.Copy(&buf, r)
+		output := buf.String()
+
+		// Paths should be relative to tmpDir
+		expectedPaths := []string{
+			"src/main.go",
+			"README.md",
+		}
+
+		for _, path := range expectedPaths {
+			if !strings.Contains(output, path) {
+				t.Errorf("output should contain path %q\noutput:\n%s", path, output)
+			}
+		}
+	})
+}
+
+func TestRelativeToWithDifferentOutputFormats(t *testing.T) {
+	tmpDir := t.TempDir()
+
+	// Create a test file
+	testFile := filepath.Join(tmpDir, "test.txt")
+	if err := os.WriteFile(testFile, []byte("test content"), 0644); err != nil {
+		t.Fatalf("failed to write test file: %v", err)
+	}
+
+	formats := []OutputFormat{"xml", "json", "markdown"}
+
+	for _, format := range formats {
+		t.Run(string(format), func(t *testing.T) {
+			cfg := &Config{
+				Directory:    tmpDir,
+				Recursive:    false,
+				RelativeTo:   tmpDir,
+				OutputFormat: format,
+			}
+
+			// Capture output
+			oldStdout := os.Stdout
+			r, w, _ := os.Pipe()
+			os.Stdout = w
+
+			app := New(cfg)
+			err := app.Run(context.Background())
+
+			w.Close()
+			os.Stdout = oldStdout
+
+			if err != nil {
+				t.Fatalf("Run() unexpected error: %v", err)
+			}
+
+			var buf bytes.Buffer
+			io.Copy(&buf, r)
+			output := buf.String()
+
+			// Should contain test.txt in output
+			if !strings.Contains(output, "test.txt") {
+				t.Errorf("output should contain 'test.txt'\noutput:\n%s", output)
+			}
+
+			// Verify format-specific output
+			switch format {
+			case "xml":
+				if !strings.Contains(output, "<file") {
+					t.Errorf("xml output should contain <file tag")
+				}
+			case "json":
+				if !strings.Contains(output, "\"path\"") {
+					t.Errorf("json output should contain path field")
+				}
+			case "markdown":
+				if !strings.Contains(output, "##") || !strings.Contains(output, "```") {
+					t.Errorf("markdown output should contain markdown formatting")
+				}
+			}
+		})
+	}
+}
diff --git a/modules/programs/catls/internal/catls/filter.go b/modules/programs/catls/internal/catls/filter.go
new file mode 100644
index 00000000..ee88165a
--- /dev/null
+++ b/modules/programs/catls/internal/catls/filter.go
@@ -0,0 +1,98 @@
+package catls
+
+import (
+	"fmt"
+	"os"
+	"regexp"
+
+	"github.com/connerosiu/dotfiles/modules/programs/catls/internal/scanner"
+)
+
+// FileFilter handles file and content filtering.
+type FileFilter struct {
+	contentPattern *regexp.Regexp
+}
+
+// FilteredLine represents a line with its original line number.
+type FilteredLine struct {
+	LineNumber int
+	Content    string
+}
+
+// NewFileFilter creates a new file filter.
+func NewFileFilter(cfg *Config) *FileFilter {
+	filter := &FileFilter{}
+	
+	// Compile content pattern if provided
+	if cfg.ContentPattern != "" {
+		regexPattern := scanner.WildcardToRegex(cfg.ContentPattern)
+		if compiled, err := regexp.Compile(regexPattern); err == nil {
+			filter.contentPattern = compiled
+		}
+	}
+	
+	return filter
+}
+
+// ShouldIncludeFile determines if a file should be included in output.
+func (f *FileFilter) ShouldIncludeFile(file scanner.FileInfo, cfg *Config) bool {
+	// Skip binary files if requested
+	if cfg.OmitBins && file.IsBinary {
+		if cfg.Debug {
+			fmt.Fprintf(os.Stderr, "Debug: Skipping binary file: %s\n", file.RelPath)
+		}
+		return false
+	}
+
+	// Check ignore patterns first
+	allIgnoreGlobs := cfg.AllIgnoreGlobs()
+	for _, pattern := range allIgnoreGlobs {
+		if scanner.MatchesGlobPattern(file.RelPath, pattern) {
+			if cfg.Debug {
+				fmt.Fprintf(os.Stderr, "Debug: Ignoring file: %s\n", file.RelPath)
+			}
+			return false
+		}
+	}
+
+	// Check include patterns
+	if len(cfg.Globs) == 0 {
+		return true // Include everything if no specific patterns
+	}
+
+	for _, pattern := range cfg.Globs {
+		if scanner.MatchesGlobPattern(file.RelPath, pattern) {
+			return true
+		}
+	}
+
+	return false
+}
+
+// FilterContent filters file content based on pattern.
+func (f *FileFilter) FilterContent(lines []string) []FilteredLine {
+	var result []FilteredLine
+
+	if f.contentPattern == nil {
+		// No pattern - return all lines
+		for i, line := range lines {
+			result = append(result, FilteredLine{
+				LineNumber: i + 1,
+				Content:    line,
+			})
+		}
+		return result
+	}
+
+	// Filter lines matching pattern
+	for i, line := range lines {
+		if f.contentPattern.MatchString(line) {
+			result = append(result, FilteredLine{
+				LineNumber: i + 1,
+				Content:    line,
+			})
+		}
+	}
+
+	return result
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/output.go b/modules/programs/catls/internal/catls/output.go
new file mode 100644
index 00000000..568b1283
--- /dev/null
+++ b/modules/programs/catls/internal/catls/output.go
@@ -0,0 +1,102 @@
+package catls
+
+import (
+	"context"
+	"fmt"
+	"html"
+)
+
+// XMLOutput handles XML output formatting.
+type XMLOutput struct{}
+
+// NewXMLOutput creates a new XML output formatter.
+func NewXMLOutput() *XMLOutput {
+	return &XMLOutput{}
+}
+
+// WriteHeader writes the opening XML structure.
+func (o *XMLOutput) WriteHeader(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	fmt.Println("<files>")
+	return nil
+}
+
+// WriteFile writes a single processed file to XML output.
+func (o *XMLOutput) WriteFile(ctx context.Context, file ProcessedFile, cfg *Config) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	return o.writeProcessedFile(file, cfg)
+}
+
+// WriteFooter writes the closing XML structure.
+func (o *XMLOutput) WriteFooter(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	fmt.Println("</files>")
+	return nil
+}
+
+// writeProcessedFile writes a processed file to XML format.
+func (o *XMLOutput) writeProcessedFile(file ProcessedFile, cfg *Config) error {
+	safePath := html.EscapeString(file.Info.RelPath)
+	fmt.Printf("<file path=\"%s\">\n", safePath)
+
+	if file.Error != nil {
+		safeError := html.EscapeString(file.Error.Error())
+		fmt.Printf("<error>%s</error>\n", safeError)
+		fmt.Println("</file>")
+		return nil
+	}
+
+	if file.Info.IsBinary {
+		fmt.Println("<binary>true</binary>")
+		fmt.Println("<content>[Binary file - contents not displayed]</content>")
+	} else {
+		if file.FileType != "" {
+			fmt.Printf("<type>%s</type>\n", html.EscapeString(file.FileType))
+		}
+
+		if err := o.writeContent(file, cfg); err != nil {
+			return err
+		}
+	}
+
+	fmt.Println("</file>")
+	return nil
+}
+
+// writeContent writes the content section of a file.
+func (o *XMLOutput) writeContent(file ProcessedFile, cfg *Config) error {
+	fmt.Println("<content>")
+
+	for _, line := range file.Lines {
+		if cfg.ShowLineNumbers {
+			fmt.Printf("%4d| %s\n", line.LineNumber, line.Content)
+		} else {
+			fmt.Println(line.Content)
+		}
+	}
+
+	if file.IsTruncated {
+		remainingLines := file.TotalLines - len(file.Lines)
+		if remainingLines > 0 {
+			fmt.Printf("... (%d more lines)\n", remainingLines)
+		}
+	}
+
+	fmt.Println("</content>")
+	return nil
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/output_factory.go b/modules/programs/catls/internal/catls/output_factory.go
new file mode 100644
index 00000000..f55a9fed
--- /dev/null
+++ b/modules/programs/catls/internal/catls/output_factory.go
@@ -0,0 +1,26 @@
+package catls
+
+import "fmt"
+
+// NewOutputFormatter creates an output formatter for the specified format.
+func NewOutputFormatter(format OutputFormat) (OutputFormatter, error) {
+	switch format {
+	case OutputFormatXML:
+		return NewXMLOutput(), nil
+	case OutputFormatJSON:
+		return NewJSONOutput(), nil
+	case OutputFormatMarkdown:
+		return NewMarkdownOutput(), nil
+	default:
+		return nil, fmt.Errorf("unsupported output format: %s", format)
+	}
+}
+
+// GetSupportedFormats returns a list of all supported output formats.
+func GetSupportedFormats() []string {
+	return []string{
+		OutputFormatXML.String(),
+		OutputFormatJSON.String(),
+		OutputFormatMarkdown.String(),
+	}
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/output_interface.go b/modules/programs/catls/internal/catls/output_interface.go
new file mode 100644
index 00000000..1d611b73
--- /dev/null
+++ b/modules/programs/catls/internal/catls/output_interface.go
@@ -0,0 +1,39 @@
+package catls
+
+import "context"
+
+// OutputFormatter defines the interface for different output formats.
+type OutputFormatter interface {
+	// WriteHeader writes the opening structure for the output format.
+	WriteHeader(ctx context.Context) error
+
+	// WriteFile writes a single processed file to the output.
+	WriteFile(ctx context.Context, file ProcessedFile, cfg *Config) error
+
+	// WriteFooter writes the closing structure for the output format.
+	WriteFooter(ctx context.Context) error
+}
+
+// OutputFormat represents supported output formats.
+type OutputFormat string
+
+const (
+	OutputFormatXML      OutputFormat = "xml"
+	OutputFormatJSON     OutputFormat = "json"
+	OutputFormatMarkdown OutputFormat = "markdown"
+)
+
+// String returns the string representation of the output format.
+func (f OutputFormat) String() string {
+	return string(f)
+}
+
+// IsValid checks if the output format is supported.
+func (f OutputFormat) IsValid() bool {
+	switch f {
+	case OutputFormatXML, OutputFormatJSON, OutputFormatMarkdown:
+		return true
+	default:
+		return false
+	}
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/output_json.go b/modules/programs/catls/internal/catls/output_json.go
new file mode 100644
index 00000000..abfc982a
--- /dev/null
+++ b/modules/programs/catls/internal/catls/output_json.go
@@ -0,0 +1,106 @@
+package catls
+
+import (
+	"context"
+	"encoding/json"
+	"os"
+)
+
+// JSONOutput handles JSON output formatting.
+type JSONOutput struct {
+	files []JSONFile
+}
+
+// JSONFile represents a file in JSON format.
+type JSONFile struct {
+	Path       string     `json:"path"`
+	Type       string     `json:"type,omitempty"`
+	Binary     bool       `json:"binary"`
+	Error      *string    `json:"error,omitempty"`
+	Lines      []JSONLine `json:"lines,omitempty"`
+	TotalLines int        `json:"totalLines"`
+	Truncated  bool       `json:"truncated"`
+}
+
+// JSONLine represents a line of content with its number.
+type JSONLine struct {
+	Number  int    `json:"number"`
+	Content string `json:"content"`
+}
+
+// NewJSONOutput creates a new JSON output formatter.
+func NewJSONOutput() *JSONOutput {
+	return &JSONOutput{
+		files: make([]JSONFile, 0),
+	}
+}
+
+// WriteHeader writes the opening JSON structure (no-op for JSON).
+func (o *JSONOutput) WriteHeader(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	// JSON requires complete structure, so we don't write anything here
+	return nil
+}
+
+// WriteFile accumulates a processed file for later JSON output.
+func (o *JSONOutput) WriteFile(ctx context.Context, file ProcessedFile, cfg *Config) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	jsonFile := JSONFile{
+		Path:       file.Info.RelPath,
+		Binary:     file.Info.IsBinary,
+		TotalLines: file.TotalLines,
+		Truncated:  file.IsTruncated,
+	}
+
+	// Set file type if available and not binary
+	if !file.Info.IsBinary && file.FileType != "" {
+		jsonFile.Type = file.FileType
+	}
+
+	// Handle errors
+	if file.Error != nil {
+		errorMsg := file.Error.Error()
+		jsonFile.Error = &errorMsg
+	} else if !file.Info.IsBinary {
+		// Add lines for non-binary files without errors
+		jsonFile.Lines = make([]JSONLine, len(file.Lines))
+		for i, line := range file.Lines {
+			jsonFile.Lines[i] = JSONLine{
+				Number:  line.LineNumber,
+				Content: line.Content,
+			}
+		}
+	}
+
+	o.files = append(o.files, jsonFile)
+	return nil
+}
+
+// WriteFooter writes the complete JSON structure.
+func (o *JSONOutput) WriteFooter(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	output := struct {
+		Files []JSONFile `json:"files"`
+	}{
+		Files: o.files,
+	}
+
+	encoder := json.NewEncoder(os.Stdout)
+	encoder.SetIndent("", "  ")
+	return encoder.Encode(output)
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/output_markdown.go b/modules/programs/catls/internal/catls/output_markdown.go
new file mode 100644
index 00000000..a6f1602a
--- /dev/null
+++ b/modules/programs/catls/internal/catls/output_markdown.go
@@ -0,0 +1,219 @@
+package catls
+
+import (
+	"context"
+	"fmt"
+	"path/filepath"
+	"strings"
+)
+
+// MarkdownOutput handles Markdown output formatting.
+type MarkdownOutput struct {
+	firstFile bool
+}
+
+// NewMarkdownOutput creates a new Markdown output formatter.
+func NewMarkdownOutput() *MarkdownOutput {
+	return &MarkdownOutput{
+		firstFile: true,
+	}
+}
+
+// WriteHeader writes the opening Markdown structure (no-op for Markdown).
+func (o *MarkdownOutput) WriteHeader(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	// No header needed for Markdown
+	return nil
+}
+
+// WriteFile writes a single processed file to Markdown output.
+func (o *MarkdownOutput) WriteFile(ctx context.Context, file ProcessedFile, cfg *Config) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	// Add spacing between files (except for the first file)
+	if !o.firstFile {
+		fmt.Println()
+	}
+	o.firstFile = false
+
+	// Write file header
+	fmt.Printf("## %s\n\n", file.Info.RelPath)
+
+	// Handle errors
+	if file.Error != nil {
+		fmt.Printf("**Error:** %s\n\n", file.Error.Error())
+		return nil
+	}
+
+	// Handle binary files
+	if file.Info.IsBinary {
+		fmt.Println("*Binary file - contents not displayed*")
+		return nil
+	}
+
+	// Determine language for syntax highlighting
+	language := o.getLanguageForSyntaxHighlighting(file.FileType, file.Info.RelPath)
+
+	// Write code block with content
+	fmt.Printf("```%s name=\"%s\"\n", language, filepath.Base(file.Info.RelPath))
+
+	// Write content lines
+	for _, line := range file.Lines {
+		if cfg.ShowLineNumbers {
+			fmt.Printf("%4d| %s\n", line.LineNumber, line.Content)
+		} else {
+			fmt.Println(line.Content)
+		}
+	}
+
+	// Handle truncation
+	if file.IsTruncated {
+		remainingLines := file.TotalLines - len(file.Lines)
+		if remainingLines > 0 {
+			fmt.Printf("... (%d more lines)\n", remainingLines)
+		}
+	}
+
+	fmt.Println("```")
+
+	return nil
+}
+
+// WriteFooter writes the closing Markdown structure (no-op for Markdown).
+func (o *MarkdownOutput) WriteFooter(ctx context.Context) error {
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	// No footer needed for Markdown
+	return nil
+}
+
+// getLanguageForSyntaxHighlighting maps file types to syntax highlighting languages.
+func (o *MarkdownOutput) getLanguageForSyntaxHighlighting(fileType, filePath string) string {
+	// Use the detected file type first
+	if fileType != "" {
+		switch fileType {
+		case "bash":
+			return "bash"
+		case "ruby":
+			return "ruby"
+		case "python":
+			return "python"
+		case "javascript":
+			return "javascript"
+		case "typescript":
+			return "typescript"
+		case "html":
+			return "html"
+		case "nix":
+			return "nix"
+		case "css":
+			return "css"
+		case "scss", "sass":
+			return "scss"
+		case "json":
+			return "json"
+		case "markdown":
+			return "markdown"
+		case "xml":
+			return "xml"
+		case "c":
+			return "c"
+		case "cpp":
+			return "cpp"
+		case "toml":
+			return "toml"
+		case "java":
+			return "java"
+		case "rust":
+			return "rust"
+		case "go":
+			return "go"
+		case "php":
+			return "php"
+		case "perl":
+			return "perl"
+		case "sql":
+			return "sql"
+		case "templ":
+			return "go" // templ files are Go-like
+		case "yaml":
+			return "yaml"
+		case "dockerfile":
+			return "dockerfile"
+		case "makefile":
+			return "makefile"
+		}
+	}
+
+	// Fallback to extension-based detection
+	ext := strings.ToLower(strings.TrimPrefix(filepath.Ext(filePath), "."))
+	switch ext {
+	case "sh", "bash", "zsh":
+		return "bash"
+	case "rb":
+		return "ruby"
+	case "py":
+		return "python"
+	case "js", "jsx":
+		return "javascript"
+	case "ts", "tsx":
+		return "typescript"
+	case "html", "htm":
+		return "html"
+	case "nix":
+		return "nix"
+	case "css":
+		return "css"
+	case "scss", "sass":
+		return "scss"
+	case "json":
+		return "json"
+	case "md", "markdown":
+		return "markdown"
+	case "xml":
+		return "xml"
+	case "c", "h":
+		return "c"
+	case "cpp", "cxx", "cc", "hpp", "hxx":
+		return "cpp"
+	case "toml":
+		return "toml"
+	case "java":
+		return "java"
+	case "rs":
+		return "rust"
+	case "go":
+		return "go"
+	case "php":
+		return "php"
+	case "pl":
+		return "perl"
+	case "sql":
+		return "sql"
+	case "templ":
+		return "go"
+	case "yml", "yaml":
+		return "yaml"
+	case "dockerfile":
+		return "dockerfile"
+	case "makefile":
+		return "makefile"
+	case "txt", "":
+		return "text"
+	default:
+		return "text"
+	}
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/catls/processor.go b/modules/programs/catls/internal/catls/processor.go
new file mode 100644
index 00000000..31747c54
--- /dev/null
+++ b/modules/programs/catls/internal/catls/processor.go
@@ -0,0 +1,156 @@
+package catls
+
+import (
+	"bufio"
+	"fmt"
+	"os"
+	"path/filepath"
+	"strings"
+
+	"github.com/connerosiu/dotfiles/modules/programs/catls/internal/scanner"
+)
+
+// FileProcessor handles file content processing.
+type FileProcessor struct {
+	typeDetector TypeDetector
+}
+
+// ProcessedFile represents a file after processing.
+type ProcessedFile struct {
+	Info        scanner.FileInfo
+	FileType    string
+	Lines       []FilteredLine
+	TotalLines  int
+	IsTruncated bool
+	Error       error
+}
+
+// TypeDetector defines interface for detecting file types.
+type TypeDetector interface {
+	DetectType(filePath string) string
+}
+
+// NewFileProcessor creates a new file processor.
+func NewFileProcessor() *FileProcessor {
+	return &FileProcessor{
+		typeDetector: &ExtensionTypeDetector{},
+	}
+}
+
+// ProcessFile processes a single file and returns its content.
+func (p *FileProcessor) ProcessFile(file scanner.FileInfo, filter *FileFilter) ProcessedFile {
+	result := ProcessedFile{
+		Info: file,
+	}
+
+	if file.IsBinary {
+		return result
+	}
+
+	// Detect file type
+	result.FileType = p.typeDetector.DetectType(file.Path)
+
+	// Read file content
+	lines, err := p.readFileLines(file.Path)
+	if err != nil {
+		result.Error = err
+		return result
+	}
+
+	result.TotalLines = len(lines)
+
+	// Apply content filtering
+	filteredLines := filter.FilterContent(lines)
+
+	// Check if we need to truncate for display
+	const maxDisplayLines = 1000
+	const truncateToLines = 100
+
+	if len(filteredLines) > maxDisplayLines && filter.contentPattern == nil {
+		result.Lines = filteredLines[:truncateToLines]
+		result.IsTruncated = true
+	} else {
+		result.Lines = filteredLines
+	}
+
+	return result
+}
+
+// readFileLines reads all lines from a file.
+func (p *FileProcessor) readFileLines(filePath string) ([]string, error) {
+	file, err := os.Open(filePath)
+	if err != nil {
+		return nil, err
+	}
+	defer func() {
+		if closeErr := file.Close(); closeErr != nil {
+			// Log close error - in a real app you'd use a proper logger
+			fmt.Fprintf(os.Stderr, "Warning: failed to close file %s: %v\n", filePath, closeErr)
+		}
+	}()
+
+	var lines []string
+	scanner := bufio.NewScanner(file)
+	for scanner.Scan() {
+		lines = append(lines, scanner.Text())
+	}
+
+	if err := scanner.Err(); err != nil {
+		return nil, err
+	}
+
+	return lines, nil
+}
+
+// ExtensionTypeDetector detects file types based on extensions.
+type ExtensionTypeDetector struct{}
+
+// DetectType implements TypeDetector.
+func (d *ExtensionTypeDetector) DetectType(filePath string) string {
+	ext := strings.ToLower(strings.TrimPrefix(filepath.Ext(filePath), "."))
+
+	typeMap := map[string]string{
+		"sh":         "bash",
+		"bash":       "bash",
+		"rb":         "ruby",
+		"py":         "python",
+		"js":         "javascript",
+		"ts":         "typescript",
+		"jsx":        "javascript",
+		"tsx":        "typescript",
+		"html":       "html",
+		"htm":        "html",
+		"nix":        "nix",
+		"css":        "css",
+		"scss":       "scss",
+		"sass":       "sass",
+		"json":       "json",
+		"md":         "markdown",
+		"markdown":   "markdown",
+		"xml":        "xml",
+		"c":          "c",
+		"cpp":        "cpp",
+		"cxx":        "cpp",
+		"cc":         "cpp",
+		"h":          "c",
+		"hpp":        "cpp",
+		"hxx":        "cpp",
+		"toml":       "toml",
+		"java":       "java",
+		"rs":         "rust",
+		"go":         "go",
+		"php":        "php",
+		"pl":         "perl",
+		"sql":        "sql",
+		"templ":      "templ",
+		"yml":        "yaml",
+		"yaml":       "yaml",
+		"dockerfile": "dockerfile",
+		"makefile":   "makefile",
+	}
+
+	if fileType, exists := typeMap[ext]; exists {
+		return fileType
+	}
+	return ""
+}
diff --git a/modules/programs/catls/internal/scanner/binary.go b/modules/programs/catls/internal/scanner/binary.go
new file mode 100644
index 00000000..9e9f3eaf
--- /dev/null
+++ b/modules/programs/catls/internal/scanner/binary.go
@@ -0,0 +1,53 @@
+package scanner
+
+import (
+	"bytes"
+	"fmt"
+	"os"
+	"os/exec"
+	"strings"
+)
+
+// BinaryDetector defines the interface for detecting binary files.
+type BinaryDetector interface {
+	IsBinary(path string) bool
+}
+
+// FileBinaryDetector implements BinaryDetector using file command and byte analysis.
+type FileBinaryDetector struct{}
+
+// IsBinary detects if a file is binary using the file command as primary method
+// and falls back to byte analysis.
+func (d *FileBinaryDetector) IsBinary(path string) bool {
+	// Try using the file command first
+	cmd := exec.Command("file", path)
+	output, err := cmd.Output()
+	if err == nil {
+		return !strings.Contains(strings.ToLower(string(output)), "text")
+	}
+
+	// Fallback to byte analysis
+	return d.isBinaryByBytes(path)
+}
+
+// isBinaryByBytes checks for null bytes in the first 1024 bytes of a file.
+func (d *FileBinaryDetector) isBinaryByBytes(path string) bool {
+	file, err := os.Open(path)
+	if err != nil {
+		return true // Assume binary if we can't read it
+	}
+	defer func() {
+		if closeErr := file.Close(); closeErr != nil {
+			// Log close error - in a real app you'd use a proper logger
+			fmt.Fprintf(os.Stderr, "Warning: failed to close file %s: %v\n", path, closeErr)
+		}
+	}()
+
+	chunk := make([]byte, 1024)
+	n, err := file.Read(chunk)
+	if err != nil {
+		return true
+	}
+
+	return bytes.Contains(chunk[:n], []byte{0})
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/scanner/ignore.go b/modules/programs/catls/internal/scanner/ignore.go
new file mode 100644
index 00000000..1a68090b
--- /dev/null
+++ b/modules/programs/catls/internal/scanner/ignore.go
@@ -0,0 +1,93 @@
+package scanner
+
+import (
+	"path/filepath"
+	"regexp"
+	"strings"
+)
+
+// shouldIgnoreDir determines if a directory should be ignored.
+func (s *Scanner) shouldIgnoreDir(dirPath string, cfg Config) bool {
+	realDirPath, err := filepath.Abs(dirPath)
+	if err != nil {
+		realDirPath = dirPath
+	}
+
+	// Check ignore directories
+	for _, ignoreDir := range cfg.IgnoreDir {
+		if s.matchesIgnoreDir(dirPath, realDirPath, ignoreDir) {
+			return true
+		}
+	}
+
+	// Check ignore globs
+	for _, pattern := range cfg.IgnoreGlobs {
+		if MatchesGlobPattern(dirPath, pattern) {
+			return true
+		}
+	}
+
+	return false
+}
+
+// matchesIgnoreDir checks if a directory matches an ignore pattern.
+func (s *Scanner) matchesIgnoreDir(dirPath, realDirPath, ignoreDir string) bool {
+	// Simple directory name match
+	if !strings.Contains(ignoreDir, string(filepath.Separator)) {
+		pathParts := strings.Split(dirPath, string(filepath.Separator))
+		for _, part := range pathParts {
+			if part == ignoreDir {
+				return true
+			}
+		}
+	}
+
+	// Directory path suffix match
+	if strings.HasSuffix(filepath.Dir(dirPath), string(filepath.Separator)+ignoreDir) {
+		return true
+	}
+
+	// Full path match for complex ignore patterns
+	if strings.Contains(ignoreDir, string(filepath.Separator)) {
+		realIgnoreDir, _ := filepath.Abs(strings.TrimSuffix(ignoreDir, "/"))
+		if strings.HasPrefix(realDirPath, realIgnoreDir) {
+			return true
+		}
+
+		if strings.Contains(filepath.Dir(dirPath), strings.TrimSuffix(ignoreDir, "/")) {
+			return true
+		}
+	}
+
+	return false
+}
+
+// MatchesGlobPattern checks if a file path matches a glob pattern.
+func MatchesGlobPattern(filePath, pattern string) bool {
+	regexPattern := WildcardToRegex(pattern)
+	regex, err := regexp.Compile(regexPattern)
+	if err != nil {
+		return false
+	}
+	
+	// Try matching against both full path and just filename
+	if regex.MatchString(filePath) {
+		return true
+	}
+	
+	// Extract filename and try matching
+	if idx := strings.LastIndex(filePath, "/"); idx >= 0 {
+		filename := filePath[idx+1:]
+		return regex.MatchString(filename)
+	}
+	
+	return regex.MatchString(filePath)
+}
+
+// WildcardToRegex converts a glob pattern to a regex pattern.
+func WildcardToRegex(pattern string) string {
+	escaped := regexp.QuoteMeta(pattern)
+	escaped = strings.ReplaceAll(escaped, `\*`, `.*`)
+	escaped = strings.ReplaceAll(escaped, `\?`, `.`)
+	return escaped
+}
\ No newline at end of file
diff --git a/modules/programs/catls/internal/scanner/scanner.go b/modules/programs/catls/internal/scanner/scanner.go
new file mode 100644
index 00000000..44925308
--- /dev/null
+++ b/modules/programs/catls/internal/scanner/scanner.go
@@ -0,0 +1,147 @@
+// Package scanner handles file discovery and analysis.
+package scanner
+
+import (
+	"context"
+	"fmt"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+)
+
+// FileInfo represents information about a discovered file.
+type FileInfo struct {
+	Path     string // Path to the file
+	RelPath  string // Relative path to the file
+	IsBinary bool   // Whether the file is a binary file.
+}
+
+// Config holds scanner configuration.
+type Config struct {
+	Directory   string   // Directory to scan
+	ShowAll     bool     // ShowAll option
+	Recursive   bool     // Recursive option
+	IgnoreDir   []string // IgnoreDir option
+	IgnoreGlobs []string // IgnoreGlobs option
+	Debug       bool     // Debug logging
+	RelativeTo  string   // Base directory for relative paths (empty means use Directory)
+}
+
+// Scanner handles file discovery and filtering.
+type Scanner struct {
+	binaryDetector BinaryDetector
+}
+
+// New creates a new scanner.
+func New() *Scanner {
+	return &Scanner{
+		binaryDetector: &FileBinaryDetector{},
+	}
+}
+
+// Scan discovers files according to configuration.
+func (s *Scanner) Scan(ctx context.Context, cfg Config) ([]FileInfo, error) {
+	var files []FileInfo
+	maxDepth := 1
+	if cfg.Recursive {
+		maxDepth = -1
+	}
+
+	type dirEntry struct {
+		path  string
+		depth int
+	}
+
+	stack := []dirEntry{{cfg.Directory, 0}}
+
+	for len(stack) > 0 {
+		select {
+		case <-ctx.Done():
+			return nil, ctx.Err()
+		default:
+		}
+
+		current := stack[len(stack)-1]
+		stack = stack[:len(stack)-1]
+
+		if maxDepth != -1 && current.depth >= maxDepth {
+			continue
+		}
+
+		entries, err := os.ReadDir(current.path)
+		if err != nil {
+			if cfg.Debug {
+				fmt.Fprintf(os.Stderr, "Error accessing directory %s: %v\n", current.path, err)
+			}
+			continue
+		}
+
+		// Sort entries for consistent output
+		var entryNames []string
+		for _, entry := range entries {
+			entryNames = append(entryNames, entry.Name())
+		}
+		sort.Strings(entryNames)
+
+		for _, entryName := range entryNames {
+			if entryName == "." || entryName == ".." {
+				continue
+			}
+
+			if !cfg.ShowAll && strings.HasPrefix(entryName, ".") {
+				continue
+			}
+
+			fullPath := filepath.Join(current.path, entryName)
+
+			info, err := os.Stat(fullPath)
+			if err != nil {
+				continue
+			}
+
+			if info.IsDir() {
+				if !s.shouldIgnoreDir(fullPath, cfg) {
+					stack = append(stack, dirEntry{fullPath, current.depth + 1})
+				} else if cfg.Debug {
+					fmt.Fprintf(os.Stderr, "Debug: Ignoring directory: %s\n", fullPath)
+				}
+			} else if info.Mode().IsRegular() {
+				relPath, err := s.getRelativePath(fullPath, cfg)
+				if err != nil {
+					continue
+				}
+
+				isBinary := s.binaryDetector.IsBinary(fullPath)
+
+				files = append(files, FileInfo{
+					Path:     fullPath,
+					RelPath:  relPath,
+					IsBinary: isBinary,
+				})
+			}
+		}
+	}
+
+	sort.Slice(files, func(i, j int) bool {
+		return files[i].RelPath < files[j].RelPath
+	})
+
+	return files, nil
+}
+
+// getRelativePath returns the relative path from base directory.
+func (s *Scanner) getRelativePath(fullPath string, cfg Config) (string, error) {
+	baseDir := cfg.Directory
+
+	// If RelativeTo is set, use it instead of the scan directory
+	if cfg.RelativeTo != "" {
+		baseDir = cfg.RelativeTo
+	}
+
+	if baseDir == "." {
+		return fullPath, nil
+	}
+
+	return filepath.Rel(baseDir, fullPath)
+}
diff --git a/modules/programs/catls/internal/scanner/scanner_test.go b/modules/programs/catls/internal/scanner/scanner_test.go
new file mode 100644
index 00000000..49a667eb
--- /dev/null
+++ b/modules/programs/catls/internal/scanner/scanner_test.go
@@ -0,0 +1,159 @@
+package scanner
+
+import (
+	"path/filepath"
+	"testing"
+)
+
+func TestGetRelativePath(t *testing.T) {
+	s := New()
+
+	tests := []struct {
+		name       string
+		fullPath   string
+		directory  string
+		relativeTo string
+		want       string
+		wantErr    bool
+	}{
+		{
+			name:       "relative to directory when RelativeTo is empty",
+			fullPath:   "/home/user/project/src/main.go",
+			directory:  "/home/user/project",
+			relativeTo: "",
+			want:       "src/main.go",
+			wantErr:    false,
+		},
+		{
+			name:       "relative to current directory when directory is dot",
+			fullPath:   "src/main.go",
+			directory:  ".",
+			relativeTo: "",
+			want:       "src/main.go",
+			wantErr:    false,
+		},
+		{
+			name:       "relative to RelativeTo when set",
+			fullPath:   "/home/user/project/src/main.go",
+			directory:  "/home/user/project/src",
+			relativeTo: "/home/user",
+			want:       "project/src/main.go",
+			wantErr:    false,
+		},
+		{
+			name:       "relative to dot RelativeTo",
+			fullPath:   "/home/user/project/src/main.go",
+			directory:  "/home/user/project",
+			relativeTo: ".",
+			want:       "/home/user/project/src/main.go",
+			wantErr:    false,
+		},
+		{
+			name:       "same directory",
+			fullPath:   "/home/user/project/main.go",
+			directory:  "/home/user/project",
+			relativeTo: "/home/user/project",
+			want:       "main.go",
+			wantErr:    false,
+		},
+		{
+			name:       "parent directory RelativeTo",
+			fullPath:   "/home/user/project/src/lib/utils.go",
+			directory:  "/home/user/project/src",
+			relativeTo: "/home/user/project",
+			want:       "src/lib/utils.go",
+			wantErr:    false,
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			cfg := Config{
+				Directory:  tt.directory,
+				RelativeTo: tt.relativeTo,
+			}
+
+			got, err := s.getRelativePath(tt.fullPath, cfg)
+			if (err != nil) != tt.wantErr {
+				t.Errorf("getRelativePath() error = %v, wantErr %v", err, tt.wantErr)
+				return
+			}
+			if got != tt.want {
+				t.Errorf("getRelativePath() = %v, want %v", got, tt.want)
+			}
+		})
+	}
+}
+
+func TestGetRelativePathWithTempDir(t *testing.T) {
+	s := New()
+
+	t.Run("relative path in temp directory", func(t *testing.T) {
+		tmpDir := t.TempDir()
+
+		subDir := filepath.Join(tmpDir, "subdir")
+		filePath := filepath.Join(subDir, "test.txt")
+
+		cfg := Config{
+			Directory:  subDir,
+			RelativeTo: "",
+		}
+
+		got, err := s.getRelativePath(filePath, cfg)
+		if err != nil {
+			t.Fatalf("getRelativePath() unexpected error: %v", err)
+		}
+
+		want := "test.txt"
+		if got != want {
+			t.Errorf("getRelativePath() = %v, want %v", got, want)
+		}
+	})
+
+	t.Run("relative to parent temp directory", func(t *testing.T) {
+		tmpDir := t.TempDir()
+
+		subDir := filepath.Join(tmpDir, "subdir")
+		filePath := filepath.Join(subDir, "test.txt")
+
+		cfg := Config{
+			Directory:  subDir,
+			RelativeTo: tmpDir,
+		}
+
+		got, err := s.getRelativePath(filePath, cfg)
+		if err != nil {
+			t.Fatalf("getRelativePath() unexpected error: %v", err)
+		}
+
+		want := filepath.Join("subdir", "test.txt")
+		if got != want {
+			t.Errorf("getRelativePath() = %v, want %v", got, want)
+		}
+	})
+
+	t.Run("relative to different temp directory", func(t *testing.T) {
+		tmpDir1 := t.TempDir()
+		tmpDir2 := t.TempDir()
+
+		filePath := filepath.Join(tmpDir1, "test.txt")
+
+		cfg := Config{
+			Directory:  tmpDir1,
+			RelativeTo: tmpDir2,
+		}
+
+		got, err := s.getRelativePath(filePath, cfg)
+		if err != nil {
+			t.Fatalf("getRelativePath() unexpected error: %v", err)
+		}
+
+		// Should contain .. to navigate between temp directories
+		if !filepath.IsAbs(got) && len(got) > 0 {
+			// Result should be a relative path
+			if got == "test.txt" {
+				t.Errorf("getRelativePath() = %v, should contain path traversal", got)
+			}
+		}
+	})
+}
diff --git a/modules/programs/catls/main.go b/modules/programs/catls/main.go
new file mode 100644
index 00000000..4ee85b63
--- /dev/null
+++ b/modules/programs/catls/main.go
@@ -0,0 +1,10 @@
+/*
+Copyright © 2025 Conner Ohnesorge <connerohnesorge@outlook.com>
+*/
+package main
+
+import "github.com/connerosiu/dotfiles/modules/programs/catls/cmd"
+
+func main() {
+	cmd.Execute()
+}
diff --git a/modules/programs/catls/test_files/README.md b/modules/programs/catls/test_files/README.md
new file mode 100644
index 00000000..212f9700
--- /dev/null
+++ b/modules/programs/catls/test_files/README.md
@@ -0,0 +1,51 @@
+# Test Files for catls Compression
+
+This directory contains example files in various programming languages to demonstrate the `--compress-globs` functionality of catls.
+
+## File Types Included
+
+### Languages that support single-line compression:
+- **JavaScript** (`example.js`) - Comments removed, compressed to single line
+- **TypeScript** (`example.ts`) - Comments removed, compressed to single line  
+- **C** (`example.c`) - Comments removed, compressed to single line
+- **Go** (`example.go`) - Comments removed, compressed to single line
+- **Rust** (`example.rs`) - Comments removed, compressed to single line
+- **Java** (`example.java`) - Comments removed, compressed to single line
+
+### Languages that only remove comments (preserve whitespace):
+- **Python** (`example.py`) - Comments removed, whitespace preserved
+- **Ruby** (`example.rb`) - Comments removed, whitespace preserved
+
+## Testing the Compression
+
+### Without compression:
+```bash
+python ../catls.py --globs "*.js" .
+python ../catls.py --globs "*.py" .
+```
+
+### With compression (requires tree-sitter-languages):
+```bash
+python ../catls.py --globs "*.js" --compress-globs .
+python ../catls.py --globs "*.py" --compress-globs .
+python ../catls.py --globs "*.c" --compress-globs .
+```
+
+### Test all files:
+```bash
+python ../catls.py --recursive --compress-globs .
+```
+
+## Expected Behavior
+
+- **Comment Removal**: All single-line (`//`, `#`) and multi-line (`/* */`, `""" """`) comments should be removed
+- **String Preservation**: String literals should remain intact with their original content
+- **Whitespace Compression**: For supported languages, code should be compressed to single lines
+- **Whitespace Preservation**: For Python/Ruby, indentation and line breaks should be preserved
+- **Graceful Fallback**: If tree-sitter is not installed, original content is displayed with a warning
+
+## Notes
+
+- These files contain extensive comments to test the comment removal functionality
+- Each file implements meaningful functionality to ensure the compressed code remains valid
+- String literals contain various characters to test preservation during compression
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/binary_example.bin b/modules/programs/catls/test_files/binary_example.bin
new file mode 100644
index 00000000..2dd519b1
--- /dev/null
+++ b/modules/programs/catls/test_files/binary_example.bin
@@ -0,0 +1 @@
+Binary file content - this should not be compressed
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/example.go b/modules/programs/catls/test_files/example.go
new file mode 100644
index 00000000..6b5db34b
--- /dev/null
+++ b/modules/programs/catls/test_files/example.go
@@ -0,0 +1,62 @@
+// Go example with comments
+// Package demonstrates Go-specific comment handling
+
+package main
+
+import (
+	"fmt"     // Standard format package
+	"strconv" // String conversion utilities
+)
+
+/*
+Person represents a person with basic information.
+This is a struct comment that should be removed.
+*/
+type Person struct {
+	Name string // Person's name
+	Age  int    // Person's age
+}
+
+// NewPerson creates a new Person instance
+// This is a constructor-like function
+func NewPerson(name string, age int) *Person {
+	return &Person{
+		Name: name, // Set the name
+		Age:  age,  // Set the age
+	}
+}
+
+/*
+String returns a string representation of the Person.
+This implements the Stringer interface.
+*/
+func (p *Person) String() string {
+	// Format the person information
+	return fmt.Sprintf("Person{Name: %s, Age: %d}", p.Name, p.Age) // Return formatted string
+}
+
+// IsAdult checks if the person is an adult (18 or older)
+func (p *Person) IsAdult() bool {
+	return p.Age >= 18 // Adult threshold is 18
+}
+
+// main function demonstrates the Person struct
+func main() {
+	// Create a new person
+	person := NewPerson("Alice", 25) // Create Alice
+	
+	/* Display person information
+	   This shows the string representation */
+	fmt.Println(person.String()) // Print person info
+	
+	// Check if adult
+	if person.IsAdult() {
+		fmt.Println(person.Name + " is an adult") // Adult message
+	} else {
+		fmt.Println(person.Name + " is a minor") // Minor message
+	}
+	
+	// Convert age to string for demonstration
+	ageStr := strconv.Itoa(person.Age) // Convert int to string
+	fmt.Printf("Age as string: %s\n", ageStr) // Print age string
+}
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/example.java b/modules/programs/catls/test_files/example.java
new file mode 100644
index 00000000..534de8e8
--- /dev/null
+++ b/modules/programs/catls/test_files/example.java
@@ -0,0 +1,138 @@
+// Java example with comprehensive comments
+// This demonstrates Java-specific comment handling
+
+import java.util.*;
+import java.util.stream.Collectors;
+
+/**
+ * A utility class for mathematical operations
+ * Provides various statistical and mathematical functions
+ */
+public class MathUtils {
+    
+    // Private constructor to prevent instantiation
+    private MathUtils() {
+        throw new IllegalStateException("Utility class"); // Prevent instantiation
+    }
+    
+    /**
+     * Calculate the arithmetic mean of a list of numbers
+     * @param numbers List of numbers to calculate mean for
+     * @return The arithmetic mean as a double
+     * @throws IllegalArgumentException if the list is empty
+     */
+    public static double calculateMean(List<Double> numbers) {
+        // Check for empty input
+        if (numbers == null || numbers.isEmpty()) {
+            throw new IllegalArgumentException("Cannot calculate mean of empty list"); // Validation error
+        }
+        
+        // Use stream to calculate sum and divide by count
+        return numbers.stream()
+                .mapToDouble(Double::doubleValue) // Convert to primitive double
+                .average() // Calculate average
+                .orElse(0.0); // Default value (shouldn't happen due to empty check)
+    }
+    
+    /*
+     * Calculate the median value of a list of numbers
+     * The median is the middle value in a sorted list
+     */
+    public static double calculateMedian(List<Double> numbers) {
+        // Validate input
+        if (numbers == null || numbers.isEmpty()) {
+            throw new IllegalArgumentException("Cannot calculate median of empty list"); // Validation
+        }
+        
+        // Create sorted copy to avoid modifying original
+        List<Double> sorted = new ArrayList<>(numbers); // Copy list
+        Collections.sort(sorted); // Sort the copy
+        
+        int size = sorted.size(); // Get list size
+        
+        // Check if odd or even number of elements
+        if (size % 2 == 1) {
+            // Odd number: return middle element
+            return sorted.get(size / 2); // Middle element
+        } else {
+            // Even number: return average of two middle elements
+            int midIndex = size / 2; // Middle index
+            return (sorted.get(midIndex - 1) + sorted.get(midIndex)) / 2.0; // Average of middle two
+        }
+    }
+    
+    /**
+     * Calculate standard deviation of a list of numbers
+     * Uses the population standard deviation formula
+     * @param numbers List of numbers
+     * @return Standard deviation as a double
+     */
+    public static double calculateStandardDeviation(List<Double> numbers) {
+        // Calculate mean first
+        double mean = calculateMean(numbers); // Get the mean
+        
+        // Calculate sum of squared differences
+        double sumSquaredDifferences = numbers.stream()
+                .mapToDouble(num -> Math.pow(num - mean, 2)) // Square the difference
+                .sum(); // Sum all squared differences
+        
+        // Return square root of variance
+        return Math.sqrt(sumSquaredDifferences / numbers.size()); // Population standard deviation
+    }
+    
+    // Find minimum and maximum values in a list
+    public static class MinMax {
+        public final double min; // Minimum value
+        public final double max; // Maximum value
+        
+        // Constructor for MinMax result
+        public MinMax(double min, double max) {
+            this.min = min; // Set minimum
+            this.max = max; // Set maximum
+        }
+    }
+    
+    /**
+     * Find the minimum and maximum values in a list
+     * @param numbers List of numbers to analyze
+     * @return MinMax object containing min and max values
+     */
+    public static MinMax findMinMax(List<Double> numbers) {
+        // Validate input
+        if (numbers == null || numbers.isEmpty()) {
+            throw new IllegalArgumentException("Cannot find min/max of empty list"); // Validation
+        }
+        
+        // Use streams to find min and max efficiently
+        OptionalDouble minOpt = numbers.stream().mapToDouble(Double::doubleValue).min(); // Find minimum
+        OptionalDouble maxOpt = numbers.stream().mapToDouble(Double::doubleValue).max(); // Find maximum
+        
+        // Return result (optionals should have values due to non-empty check)
+        return new MinMax(minOpt.orElse(0.0), maxOpt.orElse(0.0)); // Create MinMax object
+    }
+    
+    // Main method for demonstration
+    public static void main(String[] args) {
+        // Create test data
+        List<Double> testNumbers = Arrays.asList(
+                1.5, 2.3, 4.7, 3.1, 5.9, // First set of numbers
+                2.8, 4.2, 6.1, 3.5, 1.9  // Second set of numbers
+        );
+        
+        // Calculate and display statistics
+        System.out.println("Test data: " + testNumbers); // Display input data
+        
+        /* Calculate basic statistics
+           This demonstrates all the utility functions */
+        double mean = calculateMean(testNumbers); // Calculate mean
+        double median = calculateMedian(testNumbers); // Calculate median
+        double stdDev = calculateStandardDeviation(testNumbers); // Calculate standard deviation
+        MinMax minMax = findMinMax(testNumbers); // Find min and max
+        
+        // Display results with formatting
+        System.out.printf("Mean: %.2f%n", mean); // Display mean
+        System.out.printf("Median: %.2f%n", median); // Display median
+        System.out.printf("Standard Deviation: %.2f%n", stdDev); // Display std dev
+        System.out.printf("Min: %.2f, Max: %.2f%n", minMax.min, minMax.max); // Display min/max
+    }
+}
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/example.js b/modules/programs/catls/test_files/example.js
new file mode 100644
index 00000000..840f7790
--- /dev/null
+++ b/modules/programs/catls/test_files/example.js
@@ -0,0 +1,37 @@
+// JavaScript example with comments
+// This demonstrates comment removal and compression
+
+/**
+ * Calculate the factorial of a number
+ * @param {number} n - The number to calculate factorial for
+ * @returns {number} The factorial result
+ */
+function factorial(n) {
+    // Base case: factorial of 0 or 1 is 1
+    if (n <= 1) {
+        return 1; // Return 1 for base case
+    }
+    
+    /* Recursive case:
+       n! = n * (n-1)! */
+    return n * factorial(n - 1); // Recursive call
+}
+
+// Test the function
+const result = factorial(5); // Should be 120
+console.log(`Factorial of 5 is: ${result}`); // Output result
+
+// More complex example with object
+const mathUtils = {
+    // Addition function
+    add: (a, b) => a + b, // Simple arrow function
+    
+    /* Multiplication function
+       with comments */
+    multiply: function(a, b) {
+        return a * b; // Return product
+    }
+};
+
+// Export for use in other modules
+export { factorial, mathUtils };
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/example.py b/modules/programs/catls/test_files/example.py
new file mode 100644
index 00000000..50a0550a
--- /dev/null
+++ b/modules/programs/catls/test_files/example.py
@@ -0,0 +1,63 @@
+# Python example - comments should be removed but whitespace preserved
+# This file demonstrates Python-specific handling
+
+"""
+Module docstring - this is a string literal, not a comment
+Should be preserved in the output
+"""
+
+
+def calculate_fibonacci(n):
+    """Calculate the nth Fibonacci number using iterative approach.
+
+    Args:
+        n (int): The position in the Fibonacci sequence
+
+    Returns:
+        int: The nth Fibonacci number
+    """
+    # Handle edge cases
+    if n <= 0:
+        return 0  # First Fibonacci number
+    elif n == 1:
+        return 1  # Second Fibonacci number
+
+    # Initialize variables for iteration
+    a, b = 0, 1  # Start with first two numbers
+
+    # Calculate iteratively
+    for i in range(2, n + 1):
+        # Update values for next iteration
+        a, b = b, a + b  # Parallel assignment
+
+    return b  # Return the result
+
+
+class FibonacciGenerator:
+    """A class to generate Fibonacci numbers."""
+
+    def __init__(self):
+        # Initialize the generator state
+        self.cache = {0: 0, 1: 1}  # Cache for memoization
+
+    def get_fibonacci(self, n):
+        """Get the nth Fibonacci number with memoization."""
+        # Check if already calculated
+        if n in self.cache:
+            return self.cache[n]  # Return cached result
+
+        # Calculate and cache the result
+        result = self.get_fibonacci(n - 1) + self.get_fibonacci(n - 2)
+        self.cache[n] = result  # Store in cache
+
+        return result
+
+
+# Test the functions
+if __name__ == "__main__":
+    # Test the iterative function
+    print(f"Fibonacci(10) = {calculate_fibonacci(10)}")  # Should be 55
+
+    # Test the class-based approach
+    fib_gen = FibonacciGenerator()
+    print(f"Fibonacci(15) = {fib_gen.get_fibonacci(15)}")  # Should be 610
diff --git a/modules/programs/catls/test_files/example.rb b/modules/programs/catls/test_files/example.rb
new file mode 100644
index 00000000..eb303a7c
--- /dev/null
+++ b/modules/programs/catls/test_files/example.rb
@@ -0,0 +1,76 @@
+# Ruby example - comments removed, whitespace preserved
+# This demonstrates Ruby-specific comment handling
+
+=begin
+This is a multi-line comment in Ruby
+It should be handled by tree-sitter
+=end
+
+class Calculator
+  # Initialize with optional precision
+  def initialize(precision = 2)
+    @precision = precision # Store precision for rounding
+  end
+  
+  # Add two numbers with precision rounding
+  def add(a, b)
+    result = a + b # Perform addition
+    round_result(result) # Apply precision
+  end
+  
+  # Subtract two numbers with precision rounding
+  def subtract(a, b)
+    result = a - b # Perform subtraction
+    round_result(result) # Apply precision
+  end
+  
+  =begin
+  Multiply two numbers
+  Returns rounded result
+  =end
+  def multiply(a, b)
+    result = a * b # Perform multiplication
+    round_result(result) # Apply precision
+  end
+  
+  # Divide two numbers with error handling
+  def divide(a, b)
+    # Check for division by zero
+    raise ArgumentError, "Cannot divide by zero" if b.zero?
+    
+    result = a.to_f / b # Perform division (ensure float)
+    round_result(result) # Apply precision
+  end
+  
+  private
+  
+  # Round result to specified precision
+  def round_result(value)
+    value.round(@precision) # Apply rounding
+  end
+end
+
+# Demonstrate the calculator functionality
+if __FILE__ == $0
+  calc = Calculator.new(3) # Create calculator with 3 decimal places
+  
+  # Test basic operations
+  puts "Addition: #{calc.add(10.5, 3.7)}" # Should be 14.2
+  puts "Subtraction: #{calc.subtract(10.5, 3.7)}" # Should be 6.8
+  puts "Multiplication: #{calc.multiply(10.5, 3.7)}" # Should be 38.85
+  puts "Division: #{calc.divide(10.5, 3.7)}" # Should be 2.838
+  
+  # Test arrays and blocks
+  numbers = [1, 2, 3, 4, 5] # Test array
+  
+  # Calculate sum using reduce
+  sum = numbers.reduce(0) do |acc, num|
+    acc + num # Add to accumulator
+  end
+  
+  puts "Sum of array: #{sum}" # Should be 15
+  
+  # Calculate squares using map
+  squares = numbers.map { |n| n * n } # Square each number
+  puts "Squares: #{squares}" # Should be [1, 4, 9, 16, 25]
+end
\ No newline at end of file
diff --git a/modules/programs/catls/test_files/example.rs b/modules/programs/catls/test_files/example.rs
new file mode 100644
index 00000000..27aa1829
--- /dev/null
+++ b/modules/programs/catls/test_files/example.rs
@@ -0,0 +1,92 @@
+// Rust example with various comment types
+// This demonstrates Rust-specific comment handling
+
+use std::collections::HashMap; // Import HashMap for caching
+
+/// A struct to represent a point in 2D space
+/// This is a documentation comment
+#[derive(Debug, Clone, PartialEq)]
+pub struct Point {
+    pub x: f64, // X coordinate
+    pub y: f64, // Y coordinate
+}
+
+impl Point {
+    /// Create a new Point instance
+    ///
+    /// # Arguments
+    /// * `x` - The x coordinate
+    /// * `y` - The y coordinate
+    pub fn new(x: f64, y: f64) -> Self {
+        Point { x, y } // Return new point
+    }
+
+    /// Calculate the distance from origin
+    /// Formula: sqrt(x² + y²)
+    pub fn distance_from_origin(&self) -> f64 {
+        // Use Pythagorean theorem
+        (self.x * self.x + self.y * self.y).sqrt() // Calculate distance
+    }
+
+    /*
+     * Calculate distance between two points
+     * This is a multi-line comment
+     */
+    pub fn distance_to(&self, other: &Point) -> f64 {
+        let dx = self.x - other.x; // Difference in x
+        let dy = self.y - other.y; // Difference in y
+
+        // Calculate distance using Pythagorean theorem
+        (dx * dx + dy * dy).sqrt() // Return distance
+    }
+}
+
+/// A cache for storing calculated distances
+pub struct DistanceCache {
+    cache: HashMap<(String, String), f64>, // Internal cache storage
+}
+
+impl DistanceCache {
+    /// Create a new distance cache
+    pub fn new() -> Self {
+        DistanceCache {
+            cache: HashMap::new(), // Initialize empty cache
+        }
+    }
+
+    /// Get cached distance or calculate if not cached
+    pub fn get_distance(&mut self, p1: &Point, p2: &Point) -> f64 {
+        // Create cache key from point coordinates
+        let key = (
+            format!("({}, {})", p1.x, p1.y), // First point as string
+            format!("({}, {})", p2.x, p2.y), // Second point as string
+        );
+
+        /* Check if distance is already cached
+        If not, calculate and store it */
+        *self.cache.entry(key).or_insert_with(|| {
+            p1.distance_to(p2) // Calculate distance
+        })
+    }
+}
+
+// Main function to demonstrate the functionality
+fn main() {
+    // Create some test points
+    let origin = Point::new(0.0, 0.0); // Origin point
+    let point_a = Point::new(3.0, 4.0); // Point A
+    let point_b = Point::new(1.0, 1.0); // Point B
+
+    // Calculate distances
+    println!("Point A: {:?}", point_a); // Print point A
+    println!(
+        "Distance from origin: {:.2}",
+        point_a.distance_from_origin()
+    ); // Distance to origin
+
+    /* Test the distance cache functionality
+    This demonstrates caching behavior */
+    let mut cache = DistanceCache::new(); // Create cache
+    let distance = cache.get_distance(&point_a, &point_b); // Get cached distance
+    println!("Distance A to B: {:.2}", distance); // Print distance
+}
diff --git a/modules/programs/catls/test_files/example.ts b/modules/programs/catls/test_files/example.ts
new file mode 100644
index 00000000..ca44761a
--- /dev/null
+++ b/modules/programs/catls/test_files/example.ts
@@ -0,0 +1,141 @@
+// TypeScript example with type annotations and comments
+// This demonstrates TypeScript-specific comment handling
+
+/**
+ * Interface for representing a user in the system
+ * Contains basic user information
+ */
+interface User {
+    id: number;        // Unique identifier
+    name: string;      // User's display name
+    email: string;     // User's email address
+    isActive: boolean; // Whether the user account is active
+}
+
+/**
+ * Generic response wrapper for API calls
+ * @template T The type of data being returned
+ */
+interface ApiResponse<T> {
+    success: boolean;    // Whether the request succeeded
+    data?: T;           // The response data (optional)
+    error?: string;     // Error message if failed (optional)
+    timestamp: number;  // Response timestamp
+}
+
+// User service class for managing user operations
+class UserService {
+    private users: Map<number, User> = new Map(); // Internal user storage
+    private nextId: number = 1; // Auto-increment ID counter
+    
+    /**
+     * Create a new user in the system
+     * @param name - The user's name
+     * @param email - The user's email
+     * @returns Promise resolving to API response with user data
+     */
+    async createUser(name: string, email: string): Promise<ApiResponse<User>> {
+        try {
+            // Validate input parameters
+            if (!name.trim() || !email.trim()) {
+                return {
+                    success: false,
+                    error: "Name and email are required", // Validation error
+                    timestamp: Date.now()
+                };
+            }
+            
+            // Create new user object
+            const newUser: User = {
+                id: this.nextId++,     // Assign and increment ID
+                name: name.trim(),      // Clean up name
+                email: email.trim(),    // Clean up email
+                isActive: true          // Default to active
+            };
+            
+            // Store user in memory
+            this.users.set(newUser.id, newUser); // Add to storage
+            
+            /* Return successful response
+               with the created user */
+            return {
+                success: true,
+                data: newUser,          // Return created user
+                timestamp: Date.now()   // Current timestamp
+            };
+        } catch (error) {
+            // Handle any unexpected errors
+            return {
+                success: false,
+                error: "Failed to create user", // Generic error message
+                timestamp: Date.now()
+            };
+        }
+    }
+    
+    /**
+     * Get a user by their ID
+     * @param id - The user's ID
+     * @returns Promise resolving to API response with user data
+     */
+    async getUserById(id: number): Promise<ApiResponse<User>> {
+        // Look up user in storage
+        const user = this.users.get(id); // Get user from map
+        
+        if (!user) {
+            // User not found
+            return {
+                success: false,
+                error: `User with ID ${id} not found`, // Not found error
+                timestamp: Date.now()
+            };
+        }
+        
+        // Return found user
+        return {
+            success: true,
+            data: user,             // Return found user
+            timestamp: Date.now()   // Current timestamp
+        };
+    }
+    
+    // Get all active users
+    async getActiveUsers(): Promise<ApiResponse<User[]>> {
+        // Filter active users from storage
+        const activeUsers = Array.from(this.users.values())
+            .filter(user => user.isActive); // Only active users
+        
+        return {
+            success: true,
+            data: activeUsers,      // Return active users array
+            timestamp: Date.now()   // Current timestamp
+        };
+    }
+}
+
+// Demonstration of the user service
+async function demonstrateUserService(): Promise<void> {
+    const userService = new UserService(); // Create service instance
+    
+    // Create some test users
+    const user1Response = await userService.createUser("Alice Johnson", "alice@example.com");
+    const user2Response = await userService.createUser("Bob Smith", "bob@example.com");
+    
+    // Log creation results
+    console.log("Created user 1:", user1Response); // First user result
+    console.log("Created user 2:", user2Response); // Second user result
+    
+    /* Fetch and display user by ID
+       This demonstrates the retrieval functionality */
+    if (user1Response.success && user1Response.data) {
+        const fetchedUser = await userService.getUserById(user1Response.data.id);
+        console.log("Fetched user:", fetchedUser); // Display fetched user
+    }
+    
+    // Get all active users
+    const activeUsers = await userService.getActiveUsers();
+    console.log("Active users:", activeUsers); // Display all active users
+}
+
+// Run the demonstration
+demonstrateUserService().catch(console.error); // Handle any errors
\ No newline at end of file
diff --git a/modules/programs/cf/cf b/modules/programs/cf/cf
new file mode 100755
index 00000000..75e5efc4
--- /dev/null
+++ b/modules/programs/cf/cf
@@ -0,0 +1,153 @@
+#!/usr/bin/env bash
+# cf - Interactive fuzzy directory navigator
+#
+# Description:
+#   Provides an interactive fuzzy directory selection interface with preview
+#   using fzf. Changes to the selected directory upon confirmation.
+#
+# Usage:
+#   cf [directory]
+#
+# Features:
+#   - Fuzzy directory search with fzf
+#   - Directory preview with ls
+#   - Graceful cancellation handling
+#   - Works in current directory or specified directory
+#   - Shows hidden directories (excluding .git)
+#
+# Dependencies:
+#   - fzf: Fuzzy finder
+#   - fd: Fast directory finder
+#   - coreutils: For ls and cd
+
+set -euo pipefail
+
+# Color codes for output
+readonly RED='\033[0;31m'
+readonly GREEN='\033[0;32m'
+readonly YELLOW='\033[1;33m'
+readonly NC='\033[0m' # No Color
+
+# Function to print error messages
+error() {
+    echo -e "${RED}Error:${NC} $*" >&2
+}
+
+# Function to print info messages
+info() {
+    echo -e "${GREEN}Info:${NC} $*" >&2
+}
+
+# Function to check if a command exists
+command_exists() {
+    command -v "$1" >/dev/null 2>&1
+}
+
+# Function to validate dependencies
+check_dependencies() {
+    local missing_deps=()
+
+    for cmd in fzf fd ls; do
+        if ! command_exists "$cmd"; then
+            missing_deps+=("$cmd")
+        fi
+    done
+
+    if [ ${#missing_deps[@]} -ne 0 ]; then
+        error "Missing required dependencies: ${missing_deps[*]}"
+        error "These should be provided by Nix wrapper, but are not in PATH"
+        exit 1
+    fi
+}
+
+# Function to display help
+show_help() {
+    cat << EOF
+cf - Interactive fuzzy directory navigator
+
+Usage:
+    cf [directory]
+
+Description:
+    Opens an interactive fuzzy directory finder with directory preview.
+    Select a directory to change to it. Press ESC or Ctrl-C to cancel.
+
+Arguments:
+    directory    Optional directory to search (defaults to current directory)
+
+Key Bindings:
+    Enter        Change to selected directory
+    ESC/Ctrl-C   Exit without changing directory
+    Up/Down      Navigate through directories
+    Ctrl-U/D     Scroll preview window
+    Ctrl-/       Toggle preview window
+
+Examples:
+    cf                      # Search current directory
+    cf ~/projects           # Search specific directory
+    cf --help              # Show this help
+
+Dependencies:
+    fzf     Fuzzy finder for directory selection
+    fd      Fast directory finder
+    ls      Directory preview (coreutils)
+EOF
+}
+
+# Main function
+main() {
+    # Check for help flag
+    if [ $# -gt 0 ] && { [ "$1" = "--help" ] || [ "$1" = "-h" ]; }; then
+        show_help
+        exit 0
+    fi
+
+    # Validate dependencies
+    check_dependencies
+
+    # Determine search directory
+    local search_dir="${1:-.}"
+
+    # Validate directory exists
+    if [ ! -d "$search_dir" ]; then
+        error "Directory does not exist: $search_dir"
+        exit 1
+    fi
+
+    # Change to search directory
+    cd "$search_dir" || {
+        error "Cannot access directory: $search_dir"
+        exit 1
+    }
+
+    # Run fzf with ls preview
+    local selected_dir
+    selected_dir=$(fd --type d --hidden --exclude .git \
+        | fzf --preview 'ls --color {}' \
+              --preview-window=right:60%:wrap \
+              --height=100% \
+              --border \
+              --reverse \
+              --prompt='Select directory: ' \
+              --header='Enter=cd | ESC=cancel | Ctrl-/=toggle preview' \
+              --bind='ctrl-/:toggle-preview' \
+              --color='header:italic:underline')
+
+    # Check if a directory was selected
+    if [ -z "${selected_dir:-}" ]; then
+        info "No directory selected, exiting gracefully"
+        exit 0
+    fi
+
+    # Verify directory exists before changing
+    if [ ! -d "$selected_dir" ]; then
+        error "Selected directory does not exist: $selected_dir"
+        exit 1
+    fi
+
+    # Output the selected directory for the shell to cd into
+    echo "$selected_dir"
+}
+
+# Run main function
+main "$@"
diff --git a/modules/programs/cf/default.nix b/modules/programs/cf/default.nix
new file mode 100644
index 00000000..77b6c9a7
--- /dev/null
+++ b/modules/programs/cf/default.nix
@@ -0,0 +1,45 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.stdenv.mkDerivation {
+    name = "cf";
+    src = ./.;
+
+    nativeBuildInputs = with pkgs; [
+      makeWrapper
+      fzf
+      fd
+      coreutils
+    ];
+
+    installPhase = ''
+      mkdir -p $out/bin
+      cp cf $out/bin/
+      chmod +x $out/bin/cf
+
+      wrapProgram $out/bin/cf \
+        --prefix PATH : ${pkgs.lib.makeBinPath [
+        pkgs.fzf
+        pkgs.fd
+        pkgs.coreutils
+      ]}
+    '';
+  };
+in
+  delib.module {
+    name = "programs.cf";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/cldk/cldk.sh b/modules/programs/cldk/cldk.sh
new file mode 100644
index 00000000..d4a99adf
--- /dev/null
+++ b/modules/programs/cldk/cldk.sh
@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+claude --model=haiku --dangerously-skip-permissions "$@"
diff --git a/modules/programs/cldk/default.nix b/modules/programs/cldk/default.nix
new file mode 100644
index 00000000..fa8b595c
--- /dev/null
+++ b/modules/programs/cldk/default.nix
@@ -0,0 +1,25 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "cldk";
+    text = builtins.readFile ./cldk.sh;
+  };
+in
+  delib.module {
+    name = "programs.cldk";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/cldo/cldo.sh b/modules/programs/cldo/cldo.sh
new file mode 100644
index 00000000..7238e397
--- /dev/null
+++ b/modules/programs/cldo/cldo.sh
@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+claude --model=opus --dangerously-skip-permissions "$@"
diff --git a/modules/programs/cldo/default.nix b/modules/programs/cldo/default.nix
new file mode 100644
index 00000000..f4f73040
--- /dev/null
+++ b/modules/programs/cldo/default.nix
@@ -0,0 +1,25 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "cldo";
+    text = builtins.readFile ./cldo.sh;
+  };
+in
+  delib.module {
+    name = "programs.cldo";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/clds/clds.sh b/modules/programs/clds/clds.sh
new file mode 100644
index 00000000..38548936
--- /dev/null
+++ b/modules/programs/clds/clds.sh
@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+claude --model=sonnet --dangerously-skip-permissions "$@"
diff --git a/modules/programs/clds/default.nix b/modules/programs/clds/default.nix
new file mode 100644
index 00000000..4f3779c9
--- /dev/null
+++ b/modules/programs/clds/default.nix
@@ -0,0 +1,25 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "clds";
+    text = builtins.readFile ./clds.sh;
+  };
+in
+  delib.module {
+    name = "programs.clds";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/cmbd/.golangci.json b/modules/programs/cmbd/.golangci.json
new file mode 100644
index 00000000..da8ffa2d
--- /dev/null
+++ b/modules/programs/cmbd/.golangci.json
@@ -0,0 +1,98 @@
+{
+  "formatters": {
+    "exclusions": {
+      "generated": "lax",
+      "paths": [
+        "third_party$",
+        "builtin$",
+        "examples$"
+      ]
+    }
+  },
+  "linters": {
+    "enable": [
+      "asasalint",
+      "exhaustive",
+      "godox",
+      "nlreturn",
+      "bidichk",
+      "bodyclose",
+      "dupl",
+      "gocritic",
+      "godot",
+      "errname",
+      "copyloopvar",
+      "errname",
+      "gosec",
+      "goconst",
+      "intrange",
+      "perfsprint",
+      "usestdlibvars",
+      "gocheckcompilerdirectives",
+      "staticcheck",
+      "intrange",
+      "makezero",
+      "misspell",
+      "nosprintfhostport",
+      "revive",
+      "unconvert",
+      "usestdlibvars",
+      "wastedassign",
+      "whitespace",
+      "govet"
+    ],
+    "exclusions": {
+      "generated": "lax",
+      "paths": [
+        "(^|/)vendor($|/)",
+        "third_party$",
+        "builtin$",
+        "examples$"
+      ],
+      "presets": [
+        "comments",
+        "common-false-positives",
+        "legacy",
+        "std-error-handling"
+      ],
+      "linters": [
+        "gocognit",
+        "nestif"
+      ]
+    },
+    "settings": {
+      "revive": {
+        "enable-all-rules": false,
+        "rules": [
+          {
+            "exclude": [
+              "vendor/"
+            ],
+            "name": "blank-imports"
+          }
+        ]
+      },
+      "staticcheck": {
+        "checks": [
+          "-SA1019",
+          "all"
+        ]
+      }
+    }
+  },
+  "severity": {
+    "default": "warning",
+    "default-severity": "warning",
+    "rules": [
+      {
+        "linters": [
+          "goimports",
+          "intrange",
+          "usestdlibvars"
+        ],
+        "severity": "info"
+      }
+    ]
+  },
+  "version": "2"
+}
diff --git a/modules/programs/cmbd/default.nix b/modules/programs/cmbd/default.nix
new file mode 100644
index 00000000..ed85101f
--- /dev/null
+++ b/modules/programs/cmbd/default.nix
@@ -0,0 +1,27 @@
+{
+  pkgs,
+  lib,
+  delib,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+  program = pkgs.buildGoModule {
+    name = "cmbd";
+    src = ./.;
+    vendorHash = null;
+  };
+in
+  delib.module {
+    name = "programs.cmbd";
+    options = singleEnableOption false;
+    nixos.ifEnabled = {
+      environment.systemPackages = [
+        program
+      ];
+    };
+    darwin.ifEnabled = {
+      environment.systemPackages = [
+        program
+      ];
+    };
+  }
diff --git a/modules/programs/cmbd/go.mod b/modules/programs/cmbd/go.mod
new file mode 100644
index 00000000..ef653ba6
--- /dev/null
+++ b/modules/programs/cmbd/go.mod
@@ -0,0 +1,3 @@
+module github.com/connerohnesorge/dotfiles/modules/programs/cmbd
+
+go 1.24.3
diff --git a/modules/programs/cmbd/main.go b/modules/programs/cmbd/main.go
new file mode 100644
index 00000000..b66d5cb9
--- /dev/null
+++ b/modules/programs/cmbd/main.go
@@ -0,0 +1,299 @@
+// Package main provides a command line tool for combining markdown files.
+package main
+
+import (
+	"flag"
+	"fmt"
+	"io/fs"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+)
+
+// MarkdownCombiner handles the combination of markdown files.
+type MarkdownCombiner struct {
+	inputDir   string
+	outputFile string
+}
+
+// removeYAMLFrontmatter removes YAML front matter from markdown content.
+func removeYAMLFrontmatter(content string) string {
+	lines := strings.Split(content, "\n")
+
+	// Check if first line is "---" (YAML front matter start)
+	if len(lines) < 3 || strings.TrimSpace(lines[0]) != "---" {
+		return content
+	}
+
+	// Find the closing "---"
+	for i := 1; i < len(lines); i++ {
+		if strings.TrimSpace(lines[i]) == "---" {
+			// Found closing YAML delimiter, return content after it
+			if i+1 < len(lines) {
+				return strings.Join(lines[i+1:], "\n")
+			}
+
+			return ""
+		}
+	}
+
+	// No closing "---" found, return original content
+	return content
+}
+
+// increaseHeaderLevels increases all markdown header levels by one.
+func increaseHeaderLevels(content string) string {
+	lines := strings.Split(content, "\n")
+	var processedLines []string
+
+	for _, line := range lines {
+		trimmed := strings.TrimLeft(line, " \t")
+
+		// Check if line starts with # and is a valid header
+		if strings.HasPrefix(trimmed, "#") {
+			// Find where the hashes end
+			hashEnd := 0
+			for i, char := range trimmed {
+				if char == '#' {
+					hashEnd = i + 1
+				} else {
+					break
+				}
+			}
+
+			// Check if it's a valid header and process accordingly
+			switch {
+			case hashEnd < len(trimmed) && trimmed[hashEnd] == ' ':
+				// Valid header with space - add one more #
+				processedLines = append(processedLines, "#"+line)
+			case hashEnd == len(trimmed):
+				// Header with only hashes - add one more #
+				processedLines = append(processedLines, "#"+line)
+			default:
+				// Not a valid header
+				processedLines = append(processedLines, line)
+			}
+		} else {
+			processedLines = append(processedLines, line)
+		}
+	}
+
+	return strings.Join(processedLines, "\n")
+}
+
+// getMarkdownFiles returns all markdown files in the specified directory.
+func getMarkdownFiles(directory string) ([]string, error) {
+	var markdownFiles []string
+
+	// Check if directory exists
+	if _, err := os.Stat(directory); os.IsNotExist(err) {
+		return nil, fmt.Errorf("directory '%s' does not exist", directory)
+	}
+
+	// Walk through directory and find markdown files
+	err := filepath.WalkDir(directory, func(path string, d fs.DirEntry, err error) error {
+		if err != nil {
+			return err
+		}
+
+		// Skip subdirectories - only process files in the specified directory
+		if d.IsDir() && path != directory {
+			return filepath.SkipDir
+		}
+
+		// Check if file has markdown extension
+		ext := strings.ToLower(filepath.Ext(path))
+		if ext == ".md" || ext == ".markdown" {
+			markdownFiles = append(markdownFiles, path)
+		}
+
+		return nil
+	})
+
+	if err != nil {
+		return nil, fmt.Errorf("error reading directory: %v", err)
+	}
+
+	// Sort files alphabetically for consistent ordering
+	sort.Strings(markdownFiles)
+
+	return markdownFiles, nil
+}
+
+// processMarkdownFile processes a single markdown file.
+func processMarkdownFile(filePath string) (string, string, error) {
+	// Read file content
+	content, err := os.ReadFile(filePath)
+	if err != nil {
+		return "", "", fmt.Errorf("error reading file: %v", err)
+	}
+
+	contentStr := string(content)
+
+	// Remove YAML front matter
+	contentStr = removeYAMLFrontmatter(contentStr)
+
+	// Increase header levels
+	contentStr = increaseHeaderLevels(contentStr)
+
+	// Strip leading/trailing whitespace
+	contentStr = strings.TrimSpace(contentStr)
+
+	// Get filename without extension
+	filename := strings.TrimSuffix(filepath.Base(filePath), filepath.Ext(filePath))
+
+	return filename, contentStr, nil
+}
+
+// combineMarkdownFiles combines all markdown files in a directory into a single file.
+func (mc *MarkdownCombiner) combineMarkdownFiles() error {
+	// Get all markdown files
+	markdownFiles, err := getMarkdownFiles(mc.inputDir)
+	if err != nil {
+		return err
+	}
+
+	if len(markdownFiles) == 0 {
+		fmt.Printf("No markdown files found in '%s'\n", mc.inputDir)
+
+		return nil
+	}
+
+	fmt.Printf("Found %d markdown files\n", len(markdownFiles))
+
+	// Process each file and combine content
+	var combinedContent strings.Builder
+
+	for _, filePath := range markdownFiles {
+		fmt.Printf("Processing: %s\n", filepath.Base(filePath))
+
+		filename, content, err := processMarkdownFile(filePath)
+		if err != nil {
+			fmt.Printf("Error processing %s: %v\n", filepath.Base(filePath), err)
+
+			continue
+		}
+
+		// Add filename as H1 header
+		combinedContent.WriteString(fmt.Sprintf("# %s\n\n", filename))
+
+		// Add processed content if it's not empty
+		if content != "" {
+			combinedContent.WriteString(content)
+			combinedContent.WriteString("\n\n")
+		} else {
+			combinedContent.WriteString("*This file was empty or contained only YAML front matter.*\n\n")
+		}
+	}
+
+	// Create output directory if it doesn't exist
+	outputDir := filepath.Dir(mc.outputFile)
+	if outputDir != "." && outputDir != "" {
+		err = os.MkdirAll(outputDir, 0755)
+		if err != nil {
+			return fmt.Errorf("error creating output directory: %v", err)
+		}
+	}
+
+	// Write combined content to output file
+	//nolint:gosec
+	err = os.WriteFile(mc.outputFile, []byte(combinedContent.String()), 0644)
+	if err != nil {
+		return fmt.Errorf("error writing output file: %v", err)
+	}
+
+	fmt.Printf("Successfully combined %d files into '%s'\n", len(markdownFiles), mc.outputFile)
+
+	return nil
+}
+
+// printUsage prints detailed usage information.
+func printUsage() {
+	fmt.Fprintf(os.Stderr, `Markdown File Combiner
+
+Combines all markdown files in a directory into a single file.
+
+Usage:
+  %s [options] <input_directory> [output_file]
+
+Arguments:
+  input_directory    Directory containing markdown files to combine
+  output_file        Output file path (default: combined_markdown.md)
+
+Options:
+  -o, -output string    Alternative way to specify output file
+  -h, -help            Show this help message
+
+Examples:
+  %s docs/ combined.md
+  %s /path/to/markdown/files output/all_docs.md
+  %s . -o merged_documentation.md
+
+The program will:
+- Find all .md and .markdown files in the input directory
+- Remove YAML front matter from each file
+- Add the filename as an H1 header
+- Increase all existing header levels by one
+- Combine everything into a single output file
+
+`, os.Args[0], os.Args[0], os.Args[0], os.Args[0])
+}
+
+func main() {
+	// Define command line flags
+	var outputFile string
+	var showHelp bool
+
+	flag.StringVar(&outputFile, "output", "", "Output file path")
+	flag.StringVar(&outputFile, "o", "", "Output file path (shorthand)")
+	flag.BoolVar(&showHelp, "help", false, "Show help message")
+	flag.BoolVar(&showHelp, "h", false, "Show help message (shorthand)")
+
+	// Custom usage function
+	flag.Usage = printUsage
+
+	// Parse command line flags
+	flag.Parse()
+
+	// Show help if requested
+	if showHelp {
+		printUsage()
+		os.Exit(0)
+	}
+
+	// Get non-flag arguments
+	args := flag.Args()
+
+	// Validate arguments
+	if len(args) < 1 {
+		fmt.Fprintf(os.Stderr, "Error: Input directory is required\n\n")
+		printUsage()
+		os.Exit(1)
+	}
+
+	inputDir := args[0]
+
+	// Determine output file
+	defaultOutput := "combined_markdown.md"
+	finalOutput := defaultOutput
+
+	// Priority: -o flag > positional argument > default
+	if outputFile != "" {
+		finalOutput = outputFile
+	} else if len(args) > 1 {
+		finalOutput = args[1]
+	}
+
+	// Create combiner and execute
+	combiner := &MarkdownCombiner{
+		inputDir:   inputDir,
+		outputFile: finalOutput,
+	}
+
+	err := combiner.combineMarkdownFiles()
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "Error: %v\n", err)
+		os.Exit(1)
+	}
+}
diff --git a/modules/programs/convert_img/.gitignore b/modules/programs/convert_img/.gitignore
new file mode 100644
index 00000000..1347cf08
--- /dev/null
+++ b/modules/programs/convert_img/.gitignore
@@ -0,0 +1,45 @@
+# Test artifacts and temporary files
+*.png
+*.jpg
+*.jpeg
+*.webp
+*.bmp
+*.tiff
+*.gif
+*.svg
+*.avif
+*.heif
+*.ico
+output*
+test-*
+final-*
+result*
+
+# Python artifacts
+__pycache__/
+*.py[cod]
+*$py.class
+.pytest_cache/
+.coverage
+.coverage.*
+htmlcov/
+.tox/
+.cache
+.mypy_cache
+.dmypy.json
+dmypy.json
+
+# IDE and editor files
+.vscode/
+.idea/
+*.swp
+*.swo
+*~
+
+# OS files
+.DS_Store
+Thumbs.db
+
+# Nix build artifacts
+result
+result-*
\ No newline at end of file
diff --git a/modules/programs/convert_img/.python-version b/modules/programs/convert_img/.python-version
new file mode 100644
index 00000000..24ee5b1b
--- /dev/null
+++ b/modules/programs/convert_img/.python-version
@@ -0,0 +1 @@
+3.13
diff --git a/modules/programs/convert_img/README.md b/modules/programs/convert_img/README.md
new file mode 100644
index 00000000..e69de29b
diff --git a/modules/programs/convert_img/convert_img.nix b/modules/programs/convert_img/convert_img.nix
new file mode 100644
index 00000000..a870269b
--- /dev/null
+++ b/modules/programs/convert_img/convert_img.nix
@@ -0,0 +1,35 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program =
+    pkgs.writers.writePython3Bin "convert_img" {
+      flakeIgnore = ["W291" "W503" "E226" "E501" "W293"];
+      libraries = with pkgs.python3Packages; [
+        pillow
+      ];
+    }
+    ./convert_img.py;
+in
+  delib.module {
+    name = "programs.convert_img";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [
+        program
+        pkgs.potrace
+      ];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [
+        program
+        pkgs.potrace
+      ];
+    };
+  }
diff --git a/modules/programs/convert_img/convert_img.py b/modules/programs/convert_img/convert_img.py
new file mode 100644
index 00000000..5a39bab0
--- /dev/null
+++ b/modules/programs/convert_img/convert_img.py
@@ -0,0 +1,692 @@
+"""
+Universal Image Format Converter CLI Tool
+
+Converts between various image formats (JPEG, PNG, WebP, TIFF, BMP, GIF,
+AVIF, HEIF, ICO, PCX, TGA, ICNS, SVG) with support for format-specific
+options like quality, compression, and transparency handling.
+"""
+
+from __future__ import annotations
+import argparse
+import base64
+import io
+import sys
+from pathlib import Path
+
+from PIL import Image, UnidentifiedImageError
+
+
+def parse_args() -> argparse.Namespace:
+    parser = argparse.ArgumentParser(
+        description=(
+            "Convert between various image formats. "
+            "Supports JPEG, PNG, WebP, TIFF, BMP, GIF, AVIF, HEIF, ICO, SVG, etc. "
+            "Auto-detects output format from file extension or use --format."
+        ),
+        formatter_class=(argparse.RawDescriptionHelpFormatter),
+    )
+
+    parser.add_argument(
+        "input_path",
+        type=Path,
+        help="Path to the input image file (supports JPEG, PNG, WebP, TIFF, "
+        "BMP, GIF, AVIF, HEIF, ICO, etc.)",
+    )
+
+    parser.add_argument(
+        "output_path",
+        type=Path,
+        help="Path to save the converted file (format auto-detected from extension)",
+    )
+
+    parser.add_argument(
+        "-m",
+        "--method",
+        choices=["embed", "trace"],
+        default="trace",
+        help=(
+            "Conversion method:\n"
+            "  trace: Attempt to trace/vectorize image "
+            "(requires potrace) (default)\n"
+            "  embed: Embed image data in SVG"
+        ),
+    )
+
+    parser.add_argument(
+        "-f",
+        "--format",
+        choices=[
+            "auto",
+            "png",
+            "jpeg",
+            "webp",
+            "tiff",
+            "bmp",
+            "gif",
+            "avif",
+            "heif",
+            "ico",
+            "svg",
+        ],
+        default="auto",
+        help=(
+            "Output format (default: auto - detect from file extension)\n"
+            "For SVG: use --method to choose embed or trace conversion"
+        ),
+    )
+
+    parser.add_argument(
+        "-q",
+        "--quality",
+        type=int,
+        default=90,
+        help=("Quality for lossy formats " "(1-100, default: 90)"),
+    )
+
+    parser.add_argument(
+        "-w",
+        "--width",
+        type=int,
+        help=("Override SVG width " "(maintains aspect ratio)"),
+    )
+
+    parser.add_argument(
+        "--height",
+        type=int,
+        help=("Override SVG height " "(maintains aspect ratio)"),
+    )
+
+    parser.add_argument(
+        "--max-size",
+        type=int,
+        help=("Maximum width or height " "(resizes proportionally)"),
+    )
+
+    parser.add_argument(
+        "--background",
+        default="transparent",
+        help=(
+            "Background color for the SVG "
+            "(default: transparent)\n"
+            "Use 'transparent', hex colors like "
+            "'#FFFFFF', or CSS color names"
+        ),
+    )
+
+    parser.add_argument(
+        "--optimize",
+        action="store_true",
+        help="Optimize the SVG output",
+    )
+
+    parser.add_argument(
+        "--preserve-aspect",
+        action="store_true",
+        default=True,
+        help="Preserve aspect ratio (default: True)",
+    )
+
+    parser.add_argument(
+        "--trace-options",
+        default="",
+        help=(
+            "Additional options for potrace "
+            "(only with --method trace)\n"
+            "Example: '--trace-options=\"-t 4 -O 0.2\"'"
+        ),
+    )
+
+    return parser.parse_args()
+
+
+def detect_output_format(output_path: Path, format_arg: str) -> str:
+    """Detect output format from file extension or format argument."""
+    # Map file extensions to formats
+    ext_to_format = {
+        ".jpg": "jpeg",
+        ".jpeg": "jpeg",
+        ".png": "png",
+        ".webp": "webp",
+        ".tiff": "tiff",
+        ".tif": "tiff",
+        ".bmp": "bmp",
+        ".gif": "gif",
+        ".avif": "avif",
+        ".heif": "heif",
+        ".heic": "heif",
+        ".ico": "ico",
+        ".svg": "svg",
+    }
+
+    ext = output_path.suffix.lower()
+
+    # SVG extension always takes precedence
+    if ext == ".svg":
+        return "svg"
+
+    # For non-SVG extensions, use format argument if provided
+    if format_arg != "auto":
+        return format_arg.lower()
+
+    # Use extension-based detection
+    if ext in ext_to_format:
+        return ext_to_format[ext]
+
+    # Default to PNG if extension not recognized
+    print(f"Warning: Unknown extension '{ext}', defaulting to PNG format")
+    return "png"
+
+
+def get_pillow_format(format_name: str) -> str:
+    """Get the Pillow format string for a given format name."""
+    format_map = {
+        "jpeg": "JPEG",
+        "png": "PNG",
+        "webp": "WEBP",
+        "tiff": "TIFF",
+        "bmp": "BMP",
+        "gif": "GIF",
+        "avif": "AVIF",
+        "heif": "HEIF",
+        "ico": "ICO",
+    }
+    return format_map.get(format_name, "PNG")
+
+
+def prepare_image_for_format(img: Image.Image, output_format: str) -> Image.Image:
+    """Prepare image for specific output format (handle transparency, etc.)."""
+    if output_format in ("jpeg", "bmp"):
+        # JPEG and BMP don't support transparency
+        if img.mode in ("RGBA", "LA", "P"):
+            # Create white background
+            if img.mode == "P":
+                img = img.convert("RGBA")
+
+            if img.mode in ("RGBA", "LA"):
+                bg = Image.new(
+                    "RGB",
+                    img.size,
+                    (255, 255, 255),
+                )
+                if img.mode == "RGBA":
+                    bg.paste(
+                        img,
+                        mask=img.getchannel("A"),
+                    )
+                else:  # LA
+                    bg.paste(
+                        img,
+                        mask=img.getchannel("A"),
+                    )
+                img = bg
+            else:
+                img = img.convert("RGB")
+    elif output_format == "gif":
+        # GIF supports transparency but limited colors
+        if img.mode not in ("P", "L"):
+            if img.mode == "RGBA":
+                # Convert RGBA to P with transparency
+                img = img.convert("P", palette=Image.ADAPTIVE)
+            else:
+                img = img.convert("P")
+    elif output_format == "ico":
+        # ICO format considerations
+        if img.mode == "P":
+            img = img.convert("RGBA")
+
+    return img
+
+
+def convert_image_to_image(
+    input_path: Path,
+    output_path: Path,
+    output_format: str,
+    quality: int = 90,
+    width: int | None = None,
+    height: int | None = None,
+    max_size: int | None = None,
+    optimize: bool = False,
+) -> None:
+    """Convert image from one format to another."""
+    with Image.open(input_path) as img:
+        print(
+            f"Input: {img.width}x{img.height}, Mode: {img.mode}, Format: {img.format}"
+        )
+
+        # Resize if requested
+        if width or height or max_size:
+            img = resize_image(img, width, height, max_size)
+            print(f"Resized to: {img.width}x{img.height}")
+
+        # Prepare image for target format
+        img = prepare_image_for_format(img, output_format)
+
+        # Set up save arguments
+        save_kwargs = {"format": get_pillow_format(output_format)}
+
+        if output_format == "jpeg":
+            save_kwargs["quality"] = quality
+            save_kwargs["optimize"] = optimize
+        elif output_format == "png":
+            save_kwargs["optimize"] = optimize
+        elif output_format == "webp":
+            save_kwargs["quality"] = quality
+            save_kwargs["optimize"] = optimize
+        elif output_format == "tiff":
+            save_kwargs["compression"] = "lzw"
+        elif output_format == "avif":
+            save_kwargs["quality"] = quality
+            save_kwargs["optimize"] = optimize
+        elif output_format == "gif":
+            save_kwargs["optimize"] = optimize
+
+        # Save the converted image
+        img.save(output_path, **save_kwargs)
+
+        print(f"Converted {input_path.name} → {output_path.name}")
+        print(f"Output format: {output_format.upper()}")
+        if output_format != "svg":
+            print(f"Output size: {img.width}x{img.height}")
+
+
+def validate_input(input_path: Path) -> None:
+    """Validate the input file."""
+    if not input_path.exists():
+        print(f"Error: Input file does not exist: " f"{input_path}")
+        sys.exit(1)
+
+    if not input_path.is_file():
+        print(f"Error: Input path is not a file: " f"{input_path}")
+        sys.exit(1)
+
+    # Check if it's a valid image
+    try:
+        with Image.open(input_path) as img:
+            allowed_formats = [
+                "WEBP",
+                "PNG",
+                "JPEG",
+                "JPG",
+                "GIF",
+                "BMP",
+                "TIFF",
+                "TIF",
+                "AVIF",
+                "HEIF",
+                "HEIC",
+                "ICO",
+                "PCX",
+                "TGA",
+                "ICNS",
+                "PPM",
+                "PGM",
+                "PBM",
+                "XBM",
+                "XPM",
+            ]
+            if img.format not in allowed_formats:
+                print(f"Warning: Input format " f"'{img.format}' may not be supported")
+    except UnidentifiedImageError:
+        print(f"Error: Cannot identify image file: " f"{input_path}")
+        sys.exit(1)
+
+
+def resize_image(
+    img: Image.Image,
+    width: int | None = None,
+    height: int | None = None,
+    max_size: int | None = None,
+) -> Image.Image:
+    """Resize image while preserving aspect ratio."""
+    orig_w, orig_h = img.size
+
+    if max_size:
+        # Scale down if either dimension exceeds max_size
+        if orig_w > max_size or orig_h > max_size:
+            ratio = min(
+                max_size / orig_w,
+                max_size / orig_h,
+            )
+            new_w = int(orig_w * ratio)
+            new_h = int(orig_h * ratio)
+            return img.resize(
+                (new_w, new_h),
+                Image.Resampling.LANCZOS,
+            )
+
+    if width and height:
+        return img.resize(
+            (width, height),
+            Image.Resampling.LANCZOS,
+        )
+    elif width:
+        ratio = width / orig_w
+        new_h = int(orig_h * ratio)
+        return img.resize(
+            (width, new_h),
+            Image.Resampling.LANCZOS,
+        )
+    elif height:
+        ratio = height / orig_h
+        new_w = int(orig_w * ratio)
+        return img.resize(
+            (new_w, height),
+            Image.Resampling.LANCZOS,
+        )
+
+    return img
+
+
+def image_to_base64(img: Image.Image, fmt: str, quality: int = 90) -> str:
+    """Convert PIL Image to base64 encoded string."""
+    buffer = io.BytesIO()
+
+    # Handle format-specific options
+    save_kwargs = {"format": fmt.upper()}
+
+    if fmt.upper() == "JPEG":
+        # Convert RGBA to RGB for JPEG
+        if img.mode in ("RGBA", "LA"):
+            bg = Image.new("RGB", img.size, (255, 255, 255))
+            if img.mode == "RGBA":
+                bg.paste(img, mask=img.getchannel("A"))
+            else:
+                bg.paste(img, mask=img.getchannel("A"))
+            img = bg
+        save_kwargs["quality"] = quality
+        save_kwargs["optimize"] = True
+    elif fmt.upper() == "PNG":
+        save_kwargs["optimize"] = True
+    elif fmt.upper() == "WEBP":
+        save_kwargs["quality"] = quality
+        save_kwargs["optimize"] = True
+    elif fmt.upper() == "TIFF":
+        save_kwargs["compression"] = "lzw"
+    elif fmt.upper() == "BMP":
+        # BMP doesn't support transparency, convert RGBA to RGB
+        if img.mode in ("RGBA", "LA"):
+            bg = Image.new("RGB", img.size, (255, 255, 255))
+            if img.mode == "RGBA":
+                bg.paste(img, mask=img.getchannel("A"))
+            else:
+                bg.paste(img, mask=img.getchannel("A"))
+            img = bg
+    elif fmt.upper() == "AVIF":
+        save_kwargs["quality"] = quality
+        save_kwargs["optimize"] = True
+
+    img.save(buffer, **save_kwargs)
+    img_data = buffer.getvalue()
+    return base64.b64encode(img_data).decode("utf-8")
+
+
+def create_embedded_svg(
+    img: Image.Image,
+    fmt: str,
+    quality: int,
+    bg: str,
+    optimize: bool,
+) -> str:
+    """Create SVG with embedded raster image."""
+    w, h = img.size
+
+    # Get base64 encoded image
+    b64_data = image_to_base64(img, fmt, quality)
+
+    # Determine MIME type
+    mime_types = {
+        "png": "image/png",
+        "jpeg": "image/jpeg",
+        "webp": "image/webp",
+        "tiff": "image/tiff",
+        "bmp": "image/bmp",
+        "avif": "image/avif",
+    }
+    mime = mime_types.get(fmt.lower(), "image/png")
+
+    # Create SVG content
+    svg = (
+        '<?xml version="1.0" encoding="UTF-8"?>\n'
+        '<svg xmlns="http://www.w3.org/2000/svg"\n'
+        '     xmlns:xlink="http://www.w3.org/1999/xlink"\n'
+        f'     width="{w}"\n'
+        f'     height="{h}"\n'
+        f'     viewBox="0 0 {w} {h}">'
+    )
+
+    # Add background if specified
+    if bg and bg.lower() != "transparent":
+        svg += f'\n  <rect width="100%" height="100%" ' f'fill="{bg}"/>'
+
+    # Add the embedded image
+    svg += (
+        f'\n  <image x="0" y="0"\n'
+        f'         width="{w}"\n'
+        f'         height="{h}"\n'
+        f'         href="data:{mime};base64,{b64_data}"/>\n'
+        "</svg>"
+    )
+
+    return svg
+
+
+def create_traced_svg(
+    input_path: Path,
+    output_path: Path,
+    trace_opts: str,
+) -> bool:
+    """Create SVG using potrace for vector tracing."""
+    try:
+        import subprocess
+        import tempfile
+
+        # Check if potrace is available
+        try:
+            subprocess.run(
+                ["potrace", "--version"],
+                capture_output=True,
+                check=True,
+            )
+        except (
+            subprocess.CalledProcessError,
+            FileNotFoundError,
+        ):
+            print("Error: potrace is not installed or not in PATH")
+            print("Install potrace to use vector tracing:")
+            print("  Ubuntu/Debian: sudo apt-get install potrace")
+            print("  macOS: brew install potrace")
+            print("  Windows: Download from http://potrace.sourceforge.net/")
+            return False
+
+        # Convert input to bitmap format
+        # that potrace can handle
+        with tempfile.NamedTemporaryFile(suffix=".pbm", delete=False) as temp_pbm:
+            temp_pbm_path = Path(temp_pbm.name)
+
+        try:
+            # Convert to PBM using PIL
+            with Image.open(input_path) as img:
+                # Convert to 1-bit black and white
+                if img.mode != "1":
+                    img = img.convert("L")  # Grayscale first
+                    img = img.point(
+                        lambda x: (0 if x < 128 else 255),
+                        "1",
+                    )
+
+                img.save(temp_pbm_path, "PPM")
+
+            # Run potrace
+            cmd = [
+                "potrace",
+                "-s",
+            ]  # -s for SVG output
+
+            if trace_opts:
+                # Parse trace options
+                cmd.extend(trace_opts.split())
+
+            cmd.extend(
+                [
+                    "-o",
+                    str(output_path),
+                    str(temp_pbm_path),
+                ]
+            )
+
+            result = subprocess.run(
+                cmd,
+                capture_output=True,
+                text=True,
+            )
+
+            if result.returncode != 0:
+                print(f"Error running potrace: {result.stderr}")
+                return False
+
+            print(f"Successfully traced to SVG: {output_path}")
+            return True
+
+        finally:
+            # Clean up temporary file
+            if temp_pbm_path.exists():
+                temp_pbm_path.unlink()
+
+    except ImportError:
+        print("Error: subprocess module not available")
+        return False
+    except Exception as e:
+        print(f"Error during tracing: {e}")
+        return False
+
+
+def get_file_size_info(input_path: Path, output_path: Path) -> None:
+    """Print file size comparison."""
+    if input_path.exists() and output_path.exists():
+        in_size = input_path.stat().st_size
+        out_size = output_path.stat().st_size
+        ratio = out_size / in_size
+
+        print(f"Input size:  {in_size:,} bytes")
+        print(f"Output size: {out_size:,} bytes")
+        print(f"Size ratio:  {ratio:.2f}x", end="")
+        if ratio > 1:
+            print(f" ({(ratio-1)*100:.1f}% larger)")
+        else:
+            print(f" ({(1-ratio)*100:.1f}% smaller)")
+
+
+def main() -> None:
+    args = parse_args()
+
+    # Validate arguments
+    if args.quality < 1 or args.quality > 100:
+        print("Error: quality must be between 1 and 100")
+        sys.exit(1)
+
+    # Validate input
+    validate_input(args.input_path)
+
+    # Create output directory if needed
+    output_dir = args.output_path.parent
+    if not output_dir.exists():
+        output_dir.mkdir(parents=True, exist_ok=True)
+        print(f"Created output directory: {output_dir}")
+
+    # Check if input and output are the same
+    if args.input_path.resolve() == args.output_path.resolve():
+        print("Error: Input and output paths cannot be the same")
+        sys.exit(1)
+
+    # Detect output format
+    output_format = detect_output_format(args.output_path, args.format)
+
+    try:
+        if output_format == "svg":
+            # Handle SVG conversion
+            if args.method == "trace":
+                # Use potrace for vector tracing
+                success = create_traced_svg(
+                    args.input_path,
+                    args.output_path,
+                    args.trace_options,
+                )
+                if not success:
+                    print("Falling back to embed method...")
+                    args.method = "embed"
+                else:
+                    print(f"Converted {args.input_path.name} → {args.output_path.name}")
+                    print("Method: Vector tracing")
+                    get_file_size_info(
+                        args.input_path,
+                        args.output_path,
+                    )
+                    return
+
+            if args.method == "embed":
+                # Load and process the image
+                with Image.open(args.input_path) as img:
+                    print(
+                        f"Original: {img.width}x{img.height}, Mode: {img.mode}, Format: {img.format}"
+                    )
+
+                    # Resize if requested
+                    if args.width or args.height or args.max_size:
+                        img = resize_image(
+                            img,
+                            args.width,
+                            args.height,
+                            args.max_size,
+                        )
+                        print(f"Resized to: {img.width}x{img.height}")
+
+                    # For SVG embedding, use format from args or default to PNG
+                    embed_format = args.format if args.format != "auto" else "png"
+                    if embed_format == "svg":
+                        embed_format = "png"  # Can't embed SVG in SVG
+
+                    # Create SVG with embedded image
+                    svg_content = create_embedded_svg(
+                        img,
+                        embed_format,
+                        args.quality,
+                        args.background,
+                        args.optimize,
+                    )
+
+                    # Write SVG file
+                    with open(
+                        args.output_path,
+                        "w",
+                        encoding="utf-8",
+                    ) as f:
+                        f.write(svg_content)
+
+                    print(f"Converted {args.input_path.name} → {args.output_path.name}")
+                    print(f"Method: Embedded {embed_format.upper()}")
+                    print(f"SVG size: {img.width}x{img.height}")
+                    get_file_size_info(
+                        args.input_path,
+                        args.output_path,
+                    )
+        else:
+            # Handle image-to-image conversion
+            convert_image_to_image(
+                args.input_path,
+                args.output_path,
+                output_format,
+                args.quality,
+                args.width,
+                args.height,
+                args.max_size,
+                args.optimize,
+            )
+            get_file_size_info(args.input_path, args.output_path)
+
+    except Exception as e:
+        print(f"Error during conversion: {e}")
+        sys.exit(1)
+
+
+if __name__ == "__main__":
+    main()
diff --git a/modules/programs/convert_img/pyproject.toml b/modules/programs/convert_img/pyproject.toml
new file mode 100644
index 00000000..ddc10c8a
--- /dev/null
+++ b/modules/programs/convert_img/pyproject.toml
@@ -0,0 +1,26 @@
+[project]
+name = "convert-img"
+version = "0.1.0"
+description = "Universal Image Format Converter CLI Tool - Convert between JPEG, PNG, WebP, TIFF, BMP, GIF, AVIF, HEIF, ICO, SVG and more"
+readme = "README.md"
+requires-python = ">=3.11"
+dependencies = [
+    "pillow>=11.2.1",
+]
+
+[project.optional-dependencies]
+test = [
+    "pytest>=7.0.0",
+    "pytest-cov>=4.0.0",
+]
+
+[build-system]
+requires = ["hatchling"]
+build-backend = "hatchling.build"
+
+[tool.pytest.ini_options]
+testpaths = ["tests"]
+python_files = ["test_*.py"]
+python_classes = ["Test*"]
+python_functions = ["test_*"]
+addopts = "--cov=convert_img --cov-report=term-missing"
diff --git a/modules/programs/convert_img/test_basic.py b/modules/programs/convert_img/test_basic.py
new file mode 100644
index 00000000..5727057c
--- /dev/null
+++ b/modules/programs/convert_img/test_basic.py
@@ -0,0 +1,267 @@
+#!/usr/bin/env python3
+"""
+Basic test runner for convert_img without pytest dependencies.
+"""
+import sys
+import tempfile
+from pathlib import Path
+
+# Add current directory to path
+sys.path.insert(0, str(Path(__file__).parent))
+
+try:
+    from PIL import Image
+
+    print("✓ PIL/Pillow is available")
+except ImportError as e:
+    print(f"✗ PIL not available: {e}")
+    sys.exit(1)
+
+try:
+    import convert_img
+
+    print("✓ convert_img module imports successfully")
+except ImportError as e:
+    print(f"✗ convert_img import failed: {e}")
+    sys.exit(1)
+
+
+def test_format_detection():
+    """Test output format detection."""
+    test_cases = [
+        (Path("image.jpg"), "auto", "jpeg"),
+        (Path("image.png"), "auto", "png"),
+        (Path("image.webp"), "auto", "webp"),
+        (Path("image.svg"), "auto", "svg"),
+        (
+            Path("image.unknown"),
+            "auto",
+            "png",
+        ),  # Default fallback
+        (
+            Path("image.jpg"),
+            "png",
+            "png",
+        ),  # Explicit override
+    ]
+
+    for path, format_arg, expected in test_cases:
+        result = convert_img.detect_output_format(path, format_arg)
+        if result == expected:
+            print(f"✓ Format detection: {path.suffix} -> {result}")
+        else:
+            print(
+                f"✗ Format detection failed: {path.suffix} expected {expected}, got {result}"
+            )
+            return False
+    return True
+
+
+def test_pillow_format_mapping():
+    """Test Pillow format mapping."""
+    test_cases = [
+        ("jpeg", "JPEG"),
+        ("png", "PNG"),
+        ("webp", "WEBP"),
+        ("tiff", "TIFF"),
+        ("bmp", "BMP"),
+        ("gif", "GIF"),
+    ]
+
+    for input_format, expected in test_cases:
+        result = convert_img.get_pillow_format(input_format)
+        if result == expected:
+            print(f"✓ Pillow format: {input_format} -> {result}")
+        else:
+            print(
+                f"✗ Pillow format failed: {input_format} expected {expected}, got {result}"
+            )
+            return False
+    return True
+
+
+def test_image_preparation():
+    """Test image preparation for different formats."""
+    with tempfile.TemporaryDirectory() as tmpdir:
+        tmpdir = Path(tmpdir)
+
+        # Create test RGBA image
+        rgba_path = tmpdir / "test_rgba.png"
+        rgba_img = Image.new("RGBA", (50, 50), (255, 0, 0, 128))
+        rgba_img.save(rgba_path, "PNG")
+
+        with Image.open(rgba_path) as img:
+            # Test JPEG preparation (should remove alpha)
+            jpeg_img = convert_img.prepare_image_for_format(img, "jpeg")
+            if jpeg_img.mode == "RGB":
+                print("✓ JPEG transparency removal works")
+            else:
+                print(f"✗ JPEG preparation failed: expected RGB, got {jpeg_img.mode}")
+                return False
+
+            # Test PNG preparation (should keep alpha)
+            png_img = convert_img.prepare_image_for_format(img, "png")
+            if png_img.mode == "RGBA":
+                print("✓ PNG transparency preservation works")
+            else:
+                print(f"✗ PNG preparation failed: expected RGBA, got {png_img.mode}")
+                return False
+
+    return True
+
+
+def test_image_resizing():
+    """Test image resizing functionality."""
+    with tempfile.TemporaryDirectory() as tmpdir:
+        tmpdir = Path(tmpdir)
+
+        # Create test image
+        test_path = tmpdir / "test.png"
+        test_img = Image.new("RGB", (100, 100), "red")
+        test_img.save(test_path, "PNG")
+
+        with Image.open(test_path) as img:
+            # Test width-only resize
+            resized = convert_img.resize_image(img, width=50)
+            if resized.size == (50, 50):
+                print("✓ Width-only resize works")
+            else:
+                print(f"✗ Width resize failed: expected (50, 50), got {resized.size}")
+                return False
+
+            # Test max_size resize
+            resized = convert_img.resize_image(img, max_size=25)
+            if max(resized.size) == 25:
+                print("✓ Max-size resize works")
+            else:
+                print(f"✗ Max-size resize failed: expected max 25, got {resized.size}")
+                return False
+
+    return True
+
+
+def test_basic_conversion():
+    """Test basic image conversion."""
+    with tempfile.TemporaryDirectory() as tmpdir:
+        tmpdir = Path(tmpdir)
+
+        # Create test image
+        input_path = tmpdir / "input.png"
+        test_img = Image.new("RGB", (50, 50), "blue")
+        test_img.save(input_path, "PNG")
+
+        # Test PNG to JPEG conversion
+        output_path = tmpdir / "output.jpeg"
+        try:
+            convert_img.convert_image_to_image(
+                input_path,
+                output_path,
+                "jpeg",
+                quality=85,
+            )
+
+            if output_path.exists():
+                with Image.open(output_path) as result:
+                    if result.format == "JPEG" and result.size == (50, 50):
+                        print("✓ Basic PNG to JPEG conversion works")
+                        return True
+                    else:
+                        print(
+                            f"✗ Conversion result incorrect: format={result.format}, size={result.size}"
+                        )
+                        return False
+            else:
+                print("✗ Output file not created")
+                return False
+        except Exception as e:
+            print(f"✗ Conversion failed with error: {e}")
+            return False
+
+
+def test_input_validation():
+    """Test input file validation."""
+    with tempfile.TemporaryDirectory() as tmpdir:
+        tmpdir = Path(tmpdir)
+
+        # Test valid image
+        valid_path = tmpdir / "valid.png"
+        Image.new("RGB", (10, 10), "red").save(valid_path, "PNG")
+
+        try:
+            convert_img.validate_input(valid_path)
+            print("✓ Valid image validation works")
+        except SystemExit:
+            print("✗ Valid image rejected")
+            return False
+
+        # Test invalid file
+        invalid_path = tmpdir / "invalid.txt"
+        invalid_path.write_text("not an image")
+
+        try:
+            convert_img.validate_input(invalid_path)
+            print("✗ Invalid file accepted")
+            return False
+        except SystemExit:
+            print("✓ Invalid file properly rejected")
+
+    return True
+
+
+def main():
+    """Run all basic tests."""
+    print("Running basic convert_img tests...\n")
+
+    tests = [
+        (
+            "Format Detection",
+            test_format_detection,
+        ),
+        (
+            "Pillow Format Mapping",
+            test_pillow_format_mapping,
+        ),
+        (
+            "Image Preparation",
+            test_image_preparation,
+        ),
+        ("Image Resizing", test_image_resizing),
+        (
+            "Basic Conversion",
+            test_basic_conversion,
+        ),
+        (
+            "Input Validation",
+            test_input_validation,
+        ),
+    ]
+
+    passed = 0
+    failed = 0
+
+    for test_name, test_func in tests:
+        print(f"\n--- {test_name} ---")
+        try:
+            if test_func():
+                passed += 1
+            else:
+                failed += 1
+        except Exception as e:
+            print(f"✗ {test_name} failed with exception: {e}")
+            failed += 1
+
+    print(f"\n--- Test Results ---")
+    print(f"Passed: {passed}")
+    print(f"Failed: {failed}")
+    print(f"Total:  {passed + failed}")
+
+    if failed == 0:
+        print("\n🎉 All tests passed!")
+        return 0
+    else:
+        print(f"\n❌ {failed} test(s) failed!")
+        return 1
+
+
+if __name__ == "__main__":
+    sys.exit(main())
diff --git a/modules/programs/convert_img/tests/__init__.py b/modules/programs/convert_img/tests/__init__.py
new file mode 100644
index 00000000..e69de29b
diff --git a/modules/programs/convert_img/tests/conftest.py b/modules/programs/convert_img/tests/conftest.py
new file mode 100644
index 00000000..0642722a
--- /dev/null
+++ b/modules/programs/convert_img/tests/conftest.py
@@ -0,0 +1,80 @@
+"""
+Test configuration and fixtures for convert_img tests.
+"""
+
+import tempfile
+from pathlib import Path
+from typing import Iterator
+
+import pytest
+from PIL import Image
+
+
+@pytest.fixture
+def temp_dir() -> Iterator[Path]:
+    """Create a temporary directory for test files."""
+    with tempfile.TemporaryDirectory() as tmpdir:
+        yield Path(tmpdir)
+
+
+@pytest.fixture
+def sample_png(temp_dir: Path) -> Path:
+    """Create a sample PNG image for testing."""
+    img_path = temp_dir / "test.png"
+    img = Image.new("RGB", (100, 100), color="red")
+    img.save(img_path, "PNG")
+    return img_path
+
+
+@pytest.fixture
+def sample_jpeg(temp_dir: Path) -> Path:
+    """Create a sample JPEG image for testing."""
+    img_path = temp_dir / "test.jpg"
+    img = Image.new("RGB", (100, 100), color="blue")
+    img.save(img_path, "JPEG", quality=90)
+    return img_path
+
+
+@pytest.fixture
+def sample_webp(temp_dir: Path) -> Path:
+    """Create a sample WebP image for testing."""
+    img_path = temp_dir / "test.webp"
+    img = Image.new("RGB", (100, 100), color="green")
+    img.save(img_path, "WEBP", quality=90)
+    return img_path
+
+
+@pytest.fixture
+def sample_gif(temp_dir: Path) -> Path:
+    """Create a sample GIF image for testing."""
+    img_path = temp_dir / "test.gif"
+    img = Image.new("RGB", (100, 100), color="yellow")
+    img.save(img_path, "GIF")
+    return img_path
+
+
+@pytest.fixture
+def sample_bmp(temp_dir: Path) -> Path:
+    """Create a sample BMP image for testing."""
+    img_path = temp_dir / "test.bmp"
+    img = Image.new("RGB", (100, 100), color="cyan")
+    img.save(img_path, "BMP")
+    return img_path
+
+
+@pytest.fixture
+def sample_tiff(temp_dir: Path) -> Path:
+    """Create a sample TIFF image for testing."""
+    img_path = temp_dir / "test.tiff"
+    img = Image.new("RGB", (100, 100), color="magenta")
+    img.save(img_path, "TIFF")
+    return img_path
+
+
+@pytest.fixture
+def sample_rgba_png(temp_dir: Path) -> Path:
+    """Create a sample RGBA PNG image for testing transparency."""
+    img_path = temp_dir / "test_rgba.png"
+    img = Image.new("RGBA", (100, 100), color=(255, 0, 0, 128))
+    img.save(img_path, "PNG")
+    return img_path
diff --git a/modules/programs/convert_img/tests/test_convert_img.py b/modules/programs/convert_img/tests/test_convert_img.py
new file mode 100644
index 00000000..af15e839
--- /dev/null
+++ b/modules/programs/convert_img/tests/test_convert_img.py
@@ -0,0 +1,602 @@
+"""
+Comprehensive tests for convert_img module.
+"""
+
+import base64
+import subprocess
+import sys
+from pathlib import Path
+from unittest.mock import Mock, patch
+
+import pytest
+from PIL import Image
+
+# Add parent directory to path to import convert_img
+sys.path.insert(0, str(Path(__file__).parent.parent))
+import convert_img
+
+
+class TestArgumentParsing:
+    """Test command line argument parsing."""
+
+    def test_parse_args_basic(self):
+        """Test basic argument parsing."""
+        with patch.object(
+            sys,
+            "argv",
+            [
+                "convert_img",
+                "input.jpg",
+                "output.svg",
+            ],
+        ):
+            args = convert_img.parse_args()
+            assert args.input_path == Path("input.jpg")
+            assert args.output_path == Path("output.svg")
+            assert args.method == "trace"
+            assert args.format == "auto"
+            assert args.quality == 90
+
+    def test_parse_args_with_options(self):
+        """Test argument parsing with various options."""
+        with patch.object(
+            sys,
+            "argv",
+            [
+                "convert_img",
+                "input.jpg",
+                "output.svg",
+                "--method",
+                "embed",
+                "--format",
+                "jpeg",
+                "--quality",
+                "80",
+                "--width",
+                "200",
+                "--height",
+                "150",
+                "--background",
+                "white",
+                "--optimize",
+            ],
+        ):
+            args = convert_img.parse_args()
+            assert args.method == "embed"
+            assert args.format == "jpeg"
+            assert args.quality == 80
+            assert args.width == 200
+            assert args.height == 150
+            assert args.background == "white"
+            assert args.optimize is True
+
+
+class TestInputValidation:
+    """Test input file validation."""
+
+    def test_validate_input_nonexistent_file(self, temp_dir):
+        """Test validation with non-existent file."""
+        nonexistent = temp_dir / "nonexistent.jpg"
+        with pytest.raises(SystemExit):
+            convert_img.validate_input(nonexistent)
+
+    def test_validate_input_directory(self, temp_dir):
+        """Test validation with directory instead of file."""
+        with pytest.raises(SystemExit):
+            convert_img.validate_input(temp_dir)
+
+    def test_validate_input_valid_image(self, sample_png):
+        """Test validation with valid image file."""
+        # Should not raise exception
+        convert_img.validate_input(sample_png)
+
+    def test_validate_input_invalid_image(self, temp_dir):
+        """Test validation with invalid image file."""
+        invalid_file = temp_dir / "invalid.txt"
+        invalid_file.write_text("not an image")
+
+        with pytest.raises(SystemExit):
+            convert_img.validate_input(invalid_file)
+
+
+class TestImageResizing:
+    """Test image resizing functionality."""
+
+    def test_resize_image_no_resize(self, sample_png):
+        """Test image resizing with no parameters (should return unchanged)."""
+        with Image.open(sample_png) as img:
+            resized = convert_img.resize_image(img)
+            assert resized.size == img.size
+
+    def test_resize_image_by_width(self, sample_png):
+        """Test image resizing by width only."""
+        with Image.open(sample_png) as img:
+            resized = convert_img.resize_image(img, width=50)
+            assert resized.width == 50
+            assert resized.height == 50  # Should maintain aspect ratio
+
+    def test_resize_image_by_height(self, sample_png):
+        """Test image resizing by height only."""
+        with Image.open(sample_png) as img:
+            resized = convert_img.resize_image(img, height=50)
+            assert resized.height == 50
+            assert resized.width == 50  # Should maintain aspect ratio
+
+    def test_resize_image_by_max_size(self, sample_png):
+        """Test image resizing by max size."""
+        with Image.open(sample_png) as img:
+            resized = convert_img.resize_image(img, max_size=50)
+            assert max(resized.size) == 50
+
+    def test_resize_image_both_dimensions(self, sample_png):
+        """Test image resizing with both width and height."""
+        with Image.open(sample_png) as img:
+            resized = convert_img.resize_image(img, width=80, height=60)
+            assert resized.size == (80, 60)
+
+
+class TestBase64Encoding:
+    """Test base64 image encoding."""
+
+    def test_image_to_base64_png(self, sample_png):
+        """Test PNG to base64 conversion."""
+        with Image.open(sample_png) as img:
+            b64_str = convert_img.image_to_base64(img, "png")
+            assert isinstance(b64_str, str)
+            # Verify it's valid base64
+            decoded = base64.b64decode(b64_str)
+            assert len(decoded) > 0
+
+    def test_image_to_base64_jpeg(self, sample_png):
+        """Test JPEG to base64 conversion."""
+        with Image.open(sample_png) as img:
+            b64_str = convert_img.image_to_base64(img, "jpeg", quality=80)
+            assert isinstance(b64_str, str)
+            decoded = base64.b64decode(b64_str)
+            assert len(decoded) > 0
+
+    def test_image_to_base64_webp(self, sample_png):
+        """Test WebP to base64 conversion."""
+        with Image.open(sample_png) as img:
+            b64_str = convert_img.image_to_base64(img, "webp", quality=80)
+            assert isinstance(b64_str, str)
+            decoded = base64.b64decode(b64_str)
+            assert len(decoded) > 0
+
+    def test_image_to_base64_rgba_to_jpeg(self, sample_rgba_png):
+        """Test RGBA image conversion to JPEG (should convert to RGB)."""
+        with Image.open(sample_rgba_png) as img:
+            b64_str = convert_img.image_to_base64(img, "jpeg")
+            assert isinstance(b64_str, str)
+            decoded = base64.b64decode(b64_str)
+            assert len(decoded) > 0
+
+
+class TestSVGCreation:
+    """Test SVG creation functionality."""
+
+    def test_create_embedded_svg_basic(self, sample_png):
+        """Test basic embedded SVG creation."""
+        with Image.open(sample_png) as img:
+            svg_content = convert_img.create_embedded_svg(
+                img,
+                "png",
+                90,
+                "transparent",
+                False,
+            )
+            assert svg_content.startswith('<?xml version="1.0"')
+            assert "<svg" in svg_content
+            assert "image" in svg_content
+            assert "data:image/png;base64," in svg_content
+
+    def test_create_embedded_svg_with_background(self, sample_png):
+        """Test embedded SVG creation with background."""
+        with Image.open(sample_png) as img:
+            svg_content = convert_img.create_embedded_svg(
+                img, "png", 90, "white", False
+            )
+            assert 'fill="white"' in svg_content
+
+    def test_create_embedded_svg_different_formats(self, sample_png):
+        """Test embedded SVG creation with different formats."""
+        formats = [
+            "png",
+            "jpeg",
+            "webp",
+            "tiff",
+            "bmp",
+            "avif",
+        ]
+        with Image.open(sample_png) as img:
+            for fmt in formats:
+                svg_content = convert_img.create_embedded_svg(
+                    img,
+                    fmt,
+                    90,
+                    "transparent",
+                    False,
+                )
+                assert f"data:image/{fmt};base64," in svg_content
+
+
+class TestTracedSVGCreation:
+    """Test traced SVG creation (requires potrace)."""
+
+    @patch("subprocess.run")
+    def test_create_traced_svg_potrace_not_found(self, mock_run, temp_dir):
+        """Test traced SVG creation when potrace is not available."""
+        mock_run.side_effect = FileNotFoundError()
+
+        input_path = temp_dir / "input.png"
+        output_path = temp_dir / "output.svg"
+
+        result = convert_img.create_traced_svg(input_path, output_path, "")
+        assert result is False
+
+    @patch("subprocess.run")
+    def test_create_traced_svg_success(self, mock_run, sample_png, temp_dir):
+        """Test successful traced SVG creation."""
+        # Mock potrace version check
+        mock_run.return_value = Mock(returncode=0, stderr="")
+
+        output_path = temp_dir / "output.svg"
+
+        # Create a dummy SVG file to simulate potrace output
+        output_path.write_text("<svg></svg>")
+
+        result = convert_img.create_traced_svg(sample_png, output_path, "")
+        assert result is True
+
+
+class TestMainFunction:
+    """Test the main function integration."""
+
+    def test_main_embed_method(self, sample_png, temp_dir, monkeypatch):
+        """Test main function with embed method."""
+        output_path = temp_dir / "output.svg"
+
+        # Mock sys.argv
+        test_args = [
+            "convert_img",
+            str(sample_png),
+            str(output_path),
+            "--method",
+            "embed",
+            "--format",
+            "png",
+        ]
+
+        with patch.object(sys, "argv", test_args):
+            convert_img.main()
+
+        assert output_path.exists()
+        # Check if it's actually an SVG file by checking the extension and content
+        if output_path.suffix.lower() == ".svg":
+            content = output_path.read_text()
+            assert "<svg" in content
+            assert "image" in content
+        else:
+            # If not SVG, verify it's a valid image file
+            with Image.open(output_path) as result_img:
+                assert result_img.size == (
+                    100,
+                    100,
+                )
+
+    def test_main_invalid_quality(self, sample_png, temp_dir):
+        """Test main function with invalid quality parameter."""
+        output_path = temp_dir / "output.svg"
+
+        test_args = [
+            "convert_img",
+            str(sample_png),
+            str(output_path),
+            "--quality",
+            "150",  # Invalid quality > 100
+        ]
+
+        with patch.object(sys, "argv", test_args):
+            with pytest.raises(SystemExit):
+                convert_img.main()
+
+    def test_main_same_input_output(self, sample_png):
+        """Test main function with same input and output paths."""
+        test_args = [
+            "convert_img",
+            str(sample_png),
+            str(sample_png),  # Same path
+        ]
+
+        with patch.object(sys, "argv", test_args):
+            with pytest.raises(SystemExit):
+                convert_img.main()
+
+
+class TestFileSizeInfo:
+    """Test file size information functionality."""
+
+    def test_get_file_size_info(self, sample_png, temp_dir, capsys):
+        """Test file size information display."""
+        output_path = temp_dir / "output.txt"
+        output_path.write_text("test content")
+
+        convert_img.get_file_size_info(sample_png, output_path)
+
+        captured = capsys.readouterr()
+        assert "Input size:" in captured.out
+        assert "Output size:" in captured.out
+        assert "Size ratio:" in captured.out
+
+
+class TestFormatSupport:
+    """Test support for various image formats."""
+
+    @pytest.mark.parametrize(
+        "sample_fixture",
+        [
+            "sample_png",
+            "sample_jpeg",
+            "sample_webp",
+            "sample_gif",
+            "sample_bmp",
+            "sample_tiff",
+        ],
+    )
+    def test_format_validation(self, sample_fixture, request):
+        """Test that various formats are accepted."""
+        sample_file = request.getfixturevalue(sample_fixture)
+        # Should not raise exception
+        convert_img.validate_input(sample_file)
+
+    def test_embed_conversion_all_formats(self, temp_dir):
+        """Test embedded conversion for different input formats."""
+        formats = ["RGB", "RGBA", "L", "P"]
+
+        for mode in formats:
+            img_path = temp_dir / f"test_{mode.lower()}.png"
+            output_path = temp_dir / f"output_{mode.lower()}.svg"
+
+            if mode == "P":
+                # Create palette mode image
+                img = Image.new("RGB", (50, 50), color="red")
+                img = img.convert("P")
+            else:
+                img = Image.new(
+                    mode,
+                    (50, 50),
+                    color=("red" if mode != "L" else 128),
+                )
+
+            img.save(img_path, "PNG")
+
+            test_args = [
+                "convert_img",
+                str(img_path),
+                str(output_path),
+                "--method",
+                "embed",
+            ]
+
+            with patch.object(sys, "argv", test_args):
+                convert_img.main()
+
+            assert output_path.exists()
+            assert "<svg" in output_path.read_text()
+
+
+class TestImageToImageConversion:
+    """Test image-to-image format conversion functionality."""
+
+    def test_detect_output_format_from_extension(
+        self,
+    ):
+        """Test output format detection from file extensions."""
+        test_cases = [
+            (Path("image.jpg"), "auto", "jpeg"),
+            (Path("image.png"), "auto", "png"),
+            (Path("image.webp"), "auto", "webp"),
+            (Path("image.tiff"), "auto", "tiff"),
+            (Path("image.bmp"), "auto", "bmp"),
+            (Path("image.gif"), "auto", "gif"),
+            (Path("image.svg"), "auto", "svg"),
+            (
+                Path("image.unknown"),
+                "auto",
+                "png",
+            ),  # Default fallback
+            (
+                Path("image.jpg"),
+                "png",
+                "png",
+            ),  # Explicit format override
+            (
+                Path("image.svg"),
+                "png",
+                "svg",
+            ),  # SVG extension takes precedence
+        ]
+
+        for (
+            path,
+            format_arg,
+            expected,
+        ) in test_cases:
+            result = convert_img.detect_output_format(path, format_arg)
+            assert result == expected
+
+    def test_get_pillow_format(self):
+        """Test Pillow format string mapping."""
+        test_cases = [
+            ("jpeg", "JPEG"),
+            ("png", "PNG"),
+            ("webp", "WEBP"),
+            ("tiff", "TIFF"),
+            ("bmp", "BMP"),
+            ("gif", "GIF"),
+            (
+                "unknown",
+                "PNG",
+            ),  # Default fallback
+        ]
+
+        for input_format, expected in test_cases:
+            result = convert_img.get_pillow_format(input_format)
+            assert result == expected
+
+    def test_prepare_image_for_format_transparency_handling(self, sample_rgba_png):
+        """Test image preparation for formats that don't support transparency."""
+        with Image.open(sample_rgba_png) as img:
+            # Test JPEG conversion (no transparency)
+            jpeg_img = convert_img.prepare_image_for_format(img, "jpeg")
+            assert jpeg_img.mode == "RGB"
+
+            # Test BMP conversion (no transparency)
+            bmp_img = convert_img.prepare_image_for_format(img, "bmp")
+            assert bmp_img.mode == "RGB"
+
+            # Test PNG conversion (keeps transparency)
+            png_img = convert_img.prepare_image_for_format(img, "png")
+            assert png_img.mode == "RGBA"
+
+    @pytest.mark.parametrize(
+        "input_format,output_format",
+        [
+            ("png", "jpeg"),
+            ("png", "webp"),
+            ("png", "bmp"),
+            ("png", "tiff"),
+            ("png", "gif"),
+            ("jpeg", "png"),
+            ("jpeg", "webp"),
+            ("webp", "jpeg"),
+            ("webp", "png"),
+            ("bmp", "png"),
+            ("tiff", "jpeg"),
+        ],
+    )
+    def test_image_to_image_conversion(
+        self,
+        temp_dir,
+        input_format,
+        output_format,
+    ):
+        """Test conversion between different image formats."""
+        # Create input image
+        input_path = temp_dir / f"input.{input_format}"
+        output_path = temp_dir / f"output.{output_format}"
+
+        img = Image.new("RGB", (100, 100), color="blue")
+        img.save(input_path, input_format.upper())
+
+        # Perform conversion
+        convert_img.convert_image_to_image(
+            input_path,
+            output_path,
+            output_format,
+            quality=85,
+        )
+
+        # Verify output
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert (
+                result_img.format.lower()
+                == convert_img.get_pillow_format(output_format).lower()
+            )
+            assert result_img.size == (100, 100)
+
+    def test_conversion_with_resize(self, sample_png, temp_dir):
+        """Test image conversion with resizing."""
+        output_path = temp_dir / "resized.jpeg"
+
+        convert_img.convert_image_to_image(
+            sample_png,
+            output_path,
+            "jpeg",
+            width=50,
+            height=75,
+        )
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert result_img.size == (50, 75)
+            assert result_img.format == "JPEG"
+
+    def test_conversion_with_max_size(self, sample_png, temp_dir):
+        """Test image conversion with max size constraint."""
+        output_path = temp_dir / "max_size.webp"
+
+        convert_img.convert_image_to_image(
+            sample_png,
+            output_path,
+            "webp",
+            max_size=50,
+        )
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert max(result_img.size) == 50
+            assert result_img.format == "WEBP"
+
+    def test_main_function_image_conversion(self, sample_png, temp_dir):
+        """Test main function with image-to-image conversion."""
+        output_path = temp_dir / "converted.jpeg"
+
+        test_args = [
+            "convert_img",
+            str(sample_png),
+            str(output_path),
+            "--quality",
+            "80",
+        ]
+
+        with patch.object(sys, "argv", test_args):
+            convert_img.main()
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert result_img.format == "JPEG"
+
+    def test_main_function_explicit_format(self, sample_png, temp_dir):
+        """Test main function with explicit format specification."""
+        output_path = temp_dir / "output.bin"  # Unknown extension
+
+        test_args = [
+            "convert_img",
+            str(sample_png),
+            str(output_path),
+            "--format",
+            "webp",
+            "--quality",
+            "75",
+        ]
+
+        with patch.object(sys, "argv", test_args):
+            convert_img.main()
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert result_img.format == "WEBP"
+
+    def test_transparency_preservation_png_to_png(self, sample_rgba_png, temp_dir):
+        """Test that transparency is preserved in PNG to PNG conversion."""
+        output_path = temp_dir / "transparent.png"
+
+        convert_img.convert_image_to_image(sample_rgba_png, output_path, "png")
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert result_img.mode == "RGBA"
+            assert result_img.format == "PNG"
+
+    def test_transparency_removal_png_to_jpeg(self, sample_rgba_png, temp_dir):
+        """Test that transparency is properly handled in PNG to JPEG conversion."""
+        output_path = temp_dir / "no_transparency.jpeg"
+
+        convert_img.convert_image_to_image(sample_rgba_png, output_path, "jpeg")
+
+        assert output_path.exists()
+        with Image.open(output_path) as result_img:
+            assert result_img.mode == "RGB"
+            assert result_img.format == "JPEG"
diff --git a/modules/programs/convert_img/uv.lock b/modules/programs/convert_img/uv.lock
new file mode 100644
index 00000000..7d155de1
--- /dev/null
+++ b/modules/programs/convert_img/uv.lock
@@ -0,0 +1,257 @@
+version = 1
+revision = 2
+requires-python = ">=3.11"
+
+[[package]]
+name = "colorama"
+version = "0.4.6"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/d8/53/6f443c9a4a8358a93a6792e2acffb9d9d5cb0a5cfd8802644b7b1c9a02e4/colorama-0.4.6.tar.gz", hash = "sha256:08695f5cb7ed6e0531a20572697297273c47b8cae5a63ffc6d6ed5c201be6e44", size = 27697, upload-time = "2022-10-25T02:36:22.414Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/d1/d6/3965ed04c63042e047cb6a3e6ed1a63a35087b6a609aa3a15ed8ac56c221/colorama-0.4.6-py2.py3-none-any.whl", hash = "sha256:4f1d9991f5acc0ca119f9d443620b77f9d6b33703e51011c16baf57afb285fc6", size = 25335, upload-time = "2022-10-25T02:36:20.889Z" },
+]
+
+[[package]]
+name = "convert-img"
+version = "0.1.0"
+source = { editable = "." }
+dependencies = [
+    { name = "pillow" },
+]
+
+[package.optional-dependencies]
+test = [
+    { name = "pytest" },
+    { name = "pytest-cov" },
+]
+
+[package.metadata]
+requires-dist = [
+    { name = "pillow", specifier = ">=11.2.1" },
+    { name = "pytest", marker = "extra == 'test'", specifier = ">=7.0.0" },
+    { name = "pytest-cov", marker = "extra == 'test'", specifier = ">=4.0.0" },
+]
+provides-extras = ["test"]
+
+[[package]]
+name = "coverage"
+version = "7.9.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/e7/e0/98670a80884f64578f0c22cd70c5e81a6e07b08167721c7487b4d70a7ca0/coverage-7.9.1.tar.gz", hash = "sha256:6cf43c78c4282708a28e466316935ec7489a9c487518a77fa68f716c67909cec", size = 813650, upload-time = "2025-06-13T13:02:28.627Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/60/34/fa69372a07d0903a78ac103422ad34db72281c9fc625eba94ac1185da66f/coverage-7.9.1-cp311-cp311-macosx_10_9_x86_64.whl", hash = "sha256:95c765060e65c692da2d2f51a9499c5e9f5cf5453aeaf1420e3fc847cc060582", size = 212146, upload-time = "2025-06-13T13:00:48.496Z" },
+    { url = "https://files.pythonhosted.org/packages/27/f0/da1894915d2767f093f081c42afeba18e760f12fdd7a2f4acbe00564d767/coverage-7.9.1-cp311-cp311-macosx_11_0_arm64.whl", hash = "sha256:ba383dc6afd5ec5b7a0d0c23d38895db0e15bcba7fb0fa8901f245267ac30d86", size = 212536, upload-time = "2025-06-13T13:00:51.535Z" },
+    { url = "https://files.pythonhosted.org/packages/10/d5/3fc33b06e41e390f88eef111226a24e4504d216ab8e5d1a7089aa5a3c87a/coverage-7.9.1-cp311-cp311-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:37ae0383f13cbdcf1e5e7014489b0d71cc0106458878ccde52e8a12ced4298ed", size = 245092, upload-time = "2025-06-13T13:00:52.883Z" },
+    { url = "https://files.pythonhosted.org/packages/0a/39/7aa901c14977aba637b78e95800edf77f29f5a380d29768c5b66f258305b/coverage-7.9.1-cp311-cp311-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:69aa417a030bf11ec46149636314c24c8d60fadb12fc0ee8f10fda0d918c879d", size = 242806, upload-time = "2025-06-13T13:00:54.571Z" },
+    { url = "https://files.pythonhosted.org/packages/43/fc/30e5cfeaf560b1fc1989227adedc11019ce4bb7cce59d65db34fe0c2d963/coverage-7.9.1-cp311-cp311-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:0a4be2a28656afe279b34d4f91c3e26eccf2f85500d4a4ff0b1f8b54bf807338", size = 244610, upload-time = "2025-06-13T13:00:56.932Z" },
+    { url = "https://files.pythonhosted.org/packages/bf/15/cca62b13f39650bc87b2b92bb03bce7f0e79dd0bf2c7529e9fc7393e4d60/coverage-7.9.1-cp311-cp311-musllinux_1_2_aarch64.whl", hash = "sha256:382e7ddd5289f140259b610e5f5c58f713d025cb2f66d0eb17e68d0a94278875", size = 244257, upload-time = "2025-06-13T13:00:58.545Z" },
+    { url = "https://files.pythonhosted.org/packages/cd/1a/c0f2abe92c29e1464dbd0ff9d56cb6c88ae2b9e21becdb38bea31fcb2f6c/coverage-7.9.1-cp311-cp311-musllinux_1_2_i686.whl", hash = "sha256:e5532482344186c543c37bfad0ee6069e8ae4fc38d073b8bc836fc8f03c9e250", size = 242309, upload-time = "2025-06-13T13:00:59.836Z" },
+    { url = "https://files.pythonhosted.org/packages/57/8d/c6fd70848bd9bf88fa90df2af5636589a8126d2170f3aade21ed53f2b67a/coverage-7.9.1-cp311-cp311-musllinux_1_2_x86_64.whl", hash = "sha256:a39d18b3f50cc121d0ce3838d32d58bd1d15dab89c910358ebefc3665712256c", size = 242898, upload-time = "2025-06-13T13:01:02.506Z" },
+    { url = "https://files.pythonhosted.org/packages/c2/9e/6ca46c7bff4675f09a66fe2797cd1ad6a24f14c9c7c3b3ebe0470a6e30b8/coverage-7.9.1-cp311-cp311-win32.whl", hash = "sha256:dd24bd8d77c98557880def750782df77ab2b6885a18483dc8588792247174b32", size = 214561, upload-time = "2025-06-13T13:01:04.012Z" },
+    { url = "https://files.pythonhosted.org/packages/a1/30/166978c6302010742dabcdc425fa0f938fa5a800908e39aff37a7a876a13/coverage-7.9.1-cp311-cp311-win_amd64.whl", hash = "sha256:6b55ad10a35a21b8015eabddc9ba31eb590f54adc9cd39bcf09ff5349fd52125", size = 215493, upload-time = "2025-06-13T13:01:05.702Z" },
+    { url = "https://files.pythonhosted.org/packages/60/07/a6d2342cd80a5be9f0eeab115bc5ebb3917b4a64c2953534273cf9bc7ae6/coverage-7.9.1-cp311-cp311-win_arm64.whl", hash = "sha256:6ad935f0016be24c0e97fc8c40c465f9c4b85cbbe6eac48934c0dc4d2568321e", size = 213869, upload-time = "2025-06-13T13:01:09.345Z" },
+    { url = "https://files.pythonhosted.org/packages/68/d9/7f66eb0a8f2fce222de7bdc2046ec41cb31fe33fb55a330037833fb88afc/coverage-7.9.1-cp312-cp312-macosx_10_13_x86_64.whl", hash = "sha256:a8de12b4b87c20de895f10567639c0797b621b22897b0af3ce4b4e204a743626", size = 212336, upload-time = "2025-06-13T13:01:10.909Z" },
+    { url = "https://files.pythonhosted.org/packages/20/20/e07cb920ef3addf20f052ee3d54906e57407b6aeee3227a9c91eea38a665/coverage-7.9.1-cp312-cp312-macosx_11_0_arm64.whl", hash = "sha256:5add197315a054e92cee1b5f686a2bcba60c4c3e66ee3de77ace6c867bdee7cb", size = 212571, upload-time = "2025-06-13T13:01:12.518Z" },
+    { url = "https://files.pythonhosted.org/packages/78/f8/96f155de7e9e248ca9c8ff1a40a521d944ba48bec65352da9be2463745bf/coverage-7.9.1-cp312-cp312-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:600a1d4106fe66f41e5d0136dfbc68fe7200a5cbe85610ddf094f8f22e1b0300", size = 246377, upload-time = "2025-06-13T13:01:14.87Z" },
+    { url = "https://files.pythonhosted.org/packages/3e/cf/1d783bd05b7bca5c10ded5f946068909372e94615a4416afadfe3f63492d/coverage-7.9.1-cp312-cp312-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:2a876e4c3e5a2a1715a6608906aa5a2e0475b9c0f68343c2ada98110512ab1d8", size = 243394, upload-time = "2025-06-13T13:01:16.23Z" },
+    { url = "https://files.pythonhosted.org/packages/02/dd/e7b20afd35b0a1abea09fb3998e1abc9f9bd953bee548f235aebd2b11401/coverage-7.9.1-cp312-cp312-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:81f34346dd63010453922c8e628a52ea2d2ccd73cb2487f7700ac531b247c8a5", size = 245586, upload-time = "2025-06-13T13:01:17.532Z" },
+    { url = "https://files.pythonhosted.org/packages/4e/38/b30b0006fea9d617d1cb8e43b1bc9a96af11eff42b87eb8c716cf4d37469/coverage-7.9.1-cp312-cp312-musllinux_1_2_aarch64.whl", hash = "sha256:888f8eee13f2377ce86d44f338968eedec3291876b0b8a7289247ba52cb984cd", size = 245396, upload-time = "2025-06-13T13:01:19.164Z" },
+    { url = "https://files.pythonhosted.org/packages/31/e4/4d8ec1dc826e16791f3daf1b50943e8e7e1eb70e8efa7abb03936ff48418/coverage-7.9.1-cp312-cp312-musllinux_1_2_i686.whl", hash = "sha256:9969ef1e69b8c8e1e70d591f91bbc37fc9a3621e447525d1602801a24ceda898", size = 243577, upload-time = "2025-06-13T13:01:22.433Z" },
+    { url = "https://files.pythonhosted.org/packages/25/f4/b0e96c5c38e6e40ef465c4bc7f138863e2909c00e54a331da335faf0d81a/coverage-7.9.1-cp312-cp312-musllinux_1_2_x86_64.whl", hash = "sha256:60c458224331ee3f1a5b472773e4a085cc27a86a0b48205409d364272d67140d", size = 244809, upload-time = "2025-06-13T13:01:24.143Z" },
+    { url = "https://files.pythonhosted.org/packages/8a/65/27e0a1fa5e2e5079bdca4521be2f5dabf516f94e29a0defed35ac2382eb2/coverage-7.9.1-cp312-cp312-win32.whl", hash = "sha256:5f646a99a8c2b3ff4c6a6e081f78fad0dde275cd59f8f49dc4eab2e394332e74", size = 214724, upload-time = "2025-06-13T13:01:25.435Z" },
+    { url = "https://files.pythonhosted.org/packages/9b/a8/d5b128633fd1a5e0401a4160d02fa15986209a9e47717174f99dc2f7166d/coverage-7.9.1-cp312-cp312-win_amd64.whl", hash = "sha256:30f445f85c353090b83e552dcbbdad3ec84c7967e108c3ae54556ca69955563e", size = 215535, upload-time = "2025-06-13T13:01:27.861Z" },
+    { url = "https://files.pythonhosted.org/packages/a3/37/84bba9d2afabc3611f3e4325ee2c6a47cd449b580d4a606b240ce5a6f9bf/coverage-7.9.1-cp312-cp312-win_arm64.whl", hash = "sha256:af41da5dca398d3474129c58cb2b106a5d93bbb196be0d307ac82311ca234342", size = 213904, upload-time = "2025-06-13T13:01:29.202Z" },
+    { url = "https://files.pythonhosted.org/packages/d0/a7/a027970c991ca90f24e968999f7d509332daf6b8c3533d68633930aaebac/coverage-7.9.1-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:31324f18d5969feef7344a932c32428a2d1a3e50b15a6404e97cba1cc9b2c631", size = 212358, upload-time = "2025-06-13T13:01:30.909Z" },
+    { url = "https://files.pythonhosted.org/packages/f2/48/6aaed3651ae83b231556750280682528fea8ac7f1232834573472d83e459/coverage-7.9.1-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:0c804506d624e8a20fb3108764c52e0eef664e29d21692afa375e0dd98dc384f", size = 212620, upload-time = "2025-06-13T13:01:32.256Z" },
+    { url = "https://files.pythonhosted.org/packages/6c/2a/f4b613f3b44d8b9f144847c89151992b2b6b79cbc506dee89ad0c35f209d/coverage-7.9.1-cp313-cp313-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:ef64c27bc40189f36fcc50c3fb8f16ccda73b6a0b80d9bd6e6ce4cffcd810bbd", size = 245788, upload-time = "2025-06-13T13:01:33.948Z" },
+    { url = "https://files.pythonhosted.org/packages/04/d2/de4fdc03af5e4e035ef420ed26a703c6ad3d7a07aff2e959eb84e3b19ca8/coverage-7.9.1-cp313-cp313-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:d4fe2348cc6ec372e25adec0219ee2334a68d2f5222e0cba9c0d613394e12d86", size = 243001, upload-time = "2025-06-13T13:01:35.285Z" },
+    { url = "https://files.pythonhosted.org/packages/f5/e8/eed18aa5583b0423ab7f04e34659e51101135c41cd1dcb33ac1d7013a6d6/coverage-7.9.1-cp313-cp313-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:34ed2186fe52fcc24d4561041979a0dec69adae7bce2ae8d1c49eace13e55c43", size = 244985, upload-time = "2025-06-13T13:01:36.712Z" },
+    { url = "https://files.pythonhosted.org/packages/17/f8/ae9e5cce8885728c934eaa58ebfa8281d488ef2afa81c3dbc8ee9e6d80db/coverage-7.9.1-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:25308bd3d00d5eedd5ae7d4357161f4df743e3c0240fa773ee1b0f75e6c7c0f1", size = 245152, upload-time = "2025-06-13T13:01:39.303Z" },
+    { url = "https://files.pythonhosted.org/packages/5a/c8/272c01ae792bb3af9b30fac14d71d63371db227980682836ec388e2c57c0/coverage-7.9.1-cp313-cp313-musllinux_1_2_i686.whl", hash = "sha256:73e9439310f65d55a5a1e0564b48e34f5369bee943d72c88378f2d576f5a5751", size = 243123, upload-time = "2025-06-13T13:01:40.727Z" },
+    { url = "https://files.pythonhosted.org/packages/8c/d0/2819a1e3086143c094ab446e3bdf07138527a7b88cb235c488e78150ba7a/coverage-7.9.1-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:37ab6be0859141b53aa89412a82454b482c81cf750de4f29223d52268a86de67", size = 244506, upload-time = "2025-06-13T13:01:42.184Z" },
+    { url = "https://files.pythonhosted.org/packages/8b/4e/9f6117b89152df7b6112f65c7a4ed1f2f5ec8e60c4be8f351d91e7acc848/coverage-7.9.1-cp313-cp313-win32.whl", hash = "sha256:64bdd969456e2d02a8b08aa047a92d269c7ac1f47e0c977675d550c9a0863643", size = 214766, upload-time = "2025-06-13T13:01:44.482Z" },
+    { url = "https://files.pythonhosted.org/packages/27/0f/4b59f7c93b52c2c4ce7387c5a4e135e49891bb3b7408dcc98fe44033bbe0/coverage-7.9.1-cp313-cp313-win_amd64.whl", hash = "sha256:be9e3f68ca9edb897c2184ad0eee815c635565dbe7a0e7e814dc1f7cbab92c0a", size = 215568, upload-time = "2025-06-13T13:01:45.772Z" },
+    { url = "https://files.pythonhosted.org/packages/09/1e/9679826336f8c67b9c39a359352882b24a8a7aee48d4c9cad08d38d7510f/coverage-7.9.1-cp313-cp313-win_arm64.whl", hash = "sha256:1c503289ffef1d5105d91bbb4d62cbe4b14bec4d13ca225f9c73cde9bb46207d", size = 213939, upload-time = "2025-06-13T13:01:47.087Z" },
+    { url = "https://files.pythonhosted.org/packages/bb/5b/5c6b4e7a407359a2e3b27bf9c8a7b658127975def62077d441b93a30dbe8/coverage-7.9.1-cp313-cp313t-macosx_10_13_x86_64.whl", hash = "sha256:0b3496922cb5f4215bf5caaef4cf12364a26b0be82e9ed6d050f3352cf2d7ef0", size = 213079, upload-time = "2025-06-13T13:01:48.554Z" },
+    { url = "https://files.pythonhosted.org/packages/a2/22/1e2e07279fd2fd97ae26c01cc2186e2258850e9ec125ae87184225662e89/coverage-7.9.1-cp313-cp313t-macosx_11_0_arm64.whl", hash = "sha256:9565c3ab1c93310569ec0d86b017f128f027cab0b622b7af288696d7ed43a16d", size = 213299, upload-time = "2025-06-13T13:01:49.997Z" },
+    { url = "https://files.pythonhosted.org/packages/14/c0/4c5125a4b69d66b8c85986d3321520f628756cf524af810baab0790c7647/coverage-7.9.1-cp313-cp313t-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:2241ad5dbf79ae1d9c08fe52b36d03ca122fb9ac6bca0f34439e99f8327ac89f", size = 256535, upload-time = "2025-06-13T13:01:51.314Z" },
+    { url = "https://files.pythonhosted.org/packages/81/8b/e36a04889dda9960be4263e95e777e7b46f1bb4fc32202612c130a20c4da/coverage-7.9.1-cp313-cp313t-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:3bb5838701ca68b10ebc0937dbd0eb81974bac54447c55cd58dea5bca8451029", size = 252756, upload-time = "2025-06-13T13:01:54.403Z" },
+    { url = "https://files.pythonhosted.org/packages/98/82/be04eff8083a09a4622ecd0e1f31a2c563dbea3ed848069e7b0445043a70/coverage-7.9.1-cp313-cp313t-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:b30a25f814591a8c0c5372c11ac8967f669b97444c47fd794926e175c4047ece", size = 254912, upload-time = "2025-06-13T13:01:56.769Z" },
+    { url = "https://files.pythonhosted.org/packages/0f/25/c26610a2c7f018508a5ab958e5b3202d900422cf7cdca7670b6b8ca4e8df/coverage-7.9.1-cp313-cp313t-musllinux_1_2_aarch64.whl", hash = "sha256:2d04b16a6062516df97969f1ae7efd0de9c31eb6ebdceaa0d213b21c0ca1a683", size = 256144, upload-time = "2025-06-13T13:01:58.19Z" },
+    { url = "https://files.pythonhosted.org/packages/c5/8b/fb9425c4684066c79e863f1e6e7ecebb49e3a64d9f7f7860ef1688c56f4a/coverage-7.9.1-cp313-cp313t-musllinux_1_2_i686.whl", hash = "sha256:7931b9e249edefb07cd6ae10c702788546341d5fe44db5b6108a25da4dca513f", size = 254257, upload-time = "2025-06-13T13:01:59.645Z" },
+    { url = "https://files.pythonhosted.org/packages/93/df/27b882f54157fc1131e0e215b0da3b8d608d9b8ef79a045280118a8f98fe/coverage-7.9.1-cp313-cp313t-musllinux_1_2_x86_64.whl", hash = "sha256:52e92b01041151bf607ee858e5a56c62d4b70f4dac85b8c8cb7fb8a351ab2c10", size = 255094, upload-time = "2025-06-13T13:02:01.37Z" },
+    { url = "https://files.pythonhosted.org/packages/41/5f/cad1c3dbed8b3ee9e16fa832afe365b4e3eeab1fb6edb65ebbf745eabc92/coverage-7.9.1-cp313-cp313t-win32.whl", hash = "sha256:684e2110ed84fd1ca5f40e89aa44adf1729dc85444004111aa01866507adf363", size = 215437, upload-time = "2025-06-13T13:02:02.905Z" },
+    { url = "https://files.pythonhosted.org/packages/99/4d/fad293bf081c0e43331ca745ff63673badc20afea2104b431cdd8c278b4c/coverage-7.9.1-cp313-cp313t-win_amd64.whl", hash = "sha256:437c576979e4db840539674e68c84b3cda82bc824dd138d56bead1435f1cb5d7", size = 216605, upload-time = "2025-06-13T13:02:05.638Z" },
+    { url = "https://files.pythonhosted.org/packages/1f/56/4ee027d5965fc7fc126d7ec1187529cc30cc7d740846e1ecb5e92d31b224/coverage-7.9.1-cp313-cp313t-win_arm64.whl", hash = "sha256:18a0912944d70aaf5f399e350445738a1a20b50fbea788f640751c2ed9208b6c", size = 214392, upload-time = "2025-06-13T13:02:07.642Z" },
+    { url = "https://files.pythonhosted.org/packages/3e/e5/c723545c3fd3204ebde3b4cc4b927dce709d3b6dc577754bb57f63ca4a4a/coverage-7.9.1-pp39.pp310.pp311-none-any.whl", hash = "sha256:db0f04118d1db74db6c9e1cb1898532c7dcc220f1d2718f058601f7c3f499514", size = 204009, upload-time = "2025-06-13T13:02:25.787Z" },
+    { url = "https://files.pythonhosted.org/packages/08/b8/7ddd1e8ba9701dea08ce22029917140e6f66a859427406579fd8d0ca7274/coverage-7.9.1-py3-none-any.whl", hash = "sha256:66b974b145aa189516b6bf2d8423e888b742517d37872f6ee4c5be0073bd9a3c", size = 204000, upload-time = "2025-06-13T13:02:27.173Z" },
+]
+
+[package.optional-dependencies]
+toml = [
+    { name = "tomli", marker = "python_full_version <= '3.11'" },
+]
+
+[[package]]
+name = "iniconfig"
+version = "2.1.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/f2/97/ebf4da567aa6827c909642694d71c9fcf53e5b504f2d96afea02718862f3/iniconfig-2.1.0.tar.gz", hash = "sha256:3abbd2e30b36733fee78f9c7f7308f2d0050e88f0087fd25c2645f63c773e1c7", size = 4793, upload-time = "2025-03-19T20:09:59.721Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/2c/e1/e6716421ea10d38022b952c159d5161ca1193197fb744506875fbb87ea7b/iniconfig-2.1.0-py3-none-any.whl", hash = "sha256:9deba5723312380e77435581c6bf4935c94cbfab9b1ed33ef8d238ea168eb760", size = 6050, upload-time = "2025-03-19T20:10:01.071Z" },
+]
+
+[[package]]
+name = "packaging"
+version = "25.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/a1/d4/1fc4078c65507b51b96ca8f8c3ba19e6a61c8253c72794544580a7b6c24d/packaging-25.0.tar.gz", hash = "sha256:d443872c98d677bf60f6a1f2f8c1cb748e8fe762d2bf9d3148b5599295b0fc4f", size = 165727, upload-time = "2025-04-19T11:48:59.673Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/20/12/38679034af332785aac8774540895e234f4d07f7545804097de4b666afd8/packaging-25.0-py3-none-any.whl", hash = "sha256:29572ef2b1f17581046b3a2227d5c611fb25ec70ca1ba8554b24b0e69331a484", size = 66469, upload-time = "2025-04-19T11:48:57.875Z" },
+]
+
+[[package]]
+name = "pillow"
+version = "11.2.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/af/cb/bb5c01fcd2a69335b86c22142b2bccfc3464087efb7fd382eee5ffc7fdf7/pillow-11.2.1.tar.gz", hash = "sha256:a64dd61998416367b7ef979b73d3a85853ba9bec4c2925f74e588879a58716b6", size = 47026707, upload-time = "2025-04-12T17:50:03.289Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/68/08/3fbf4b98924c73037a8e8b4c2c774784805e0fb4ebca6c5bb60795c40125/pillow-11.2.1-cp311-cp311-macosx_10_10_x86_64.whl", hash = "sha256:35ca289f712ccfc699508c4658a1d14652e8033e9b69839edf83cbdd0ba39e70", size = 3198450, upload-time = "2025-04-12T17:47:37.135Z" },
+    { url = "https://files.pythonhosted.org/packages/84/92/6505b1af3d2849d5e714fc75ba9e69b7255c05ee42383a35a4d58f576b16/pillow-11.2.1-cp311-cp311-macosx_11_0_arm64.whl", hash = "sha256:e0409af9f829f87a2dfb7e259f78f317a5351f2045158be321fd135973fff7bf", size = 3030550, upload-time = "2025-04-12T17:47:39.345Z" },
+    { url = "https://files.pythonhosted.org/packages/3c/8c/ac2f99d2a70ff966bc7eb13dacacfaab57c0549b2ffb351b6537c7840b12/pillow-11.2.1-cp311-cp311-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:d4e5c5edee874dce4f653dbe59db7c73a600119fbea8d31f53423586ee2aafd7", size = 4415018, upload-time = "2025-04-12T17:47:41.128Z" },
+    { url = "https://files.pythonhosted.org/packages/1f/e3/0a58b5d838687f40891fff9cbaf8669f90c96b64dc8f91f87894413856c6/pillow-11.2.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:b93a07e76d13bff9444f1a029e0af2964e654bfc2e2c2d46bfd080df5ad5f3d8", size = 4498006, upload-time = "2025-04-12T17:47:42.912Z" },
+    { url = "https://files.pythonhosted.org/packages/21/f5/6ba14718135f08fbfa33308efe027dd02b781d3f1d5c471444a395933aac/pillow-11.2.1-cp311-cp311-manylinux_2_28_aarch64.whl", hash = "sha256:e6def7eed9e7fa90fde255afaf08060dc4b343bbe524a8f69bdd2a2f0018f600", size = 4517773, upload-time = "2025-04-12T17:47:44.611Z" },
+    { url = "https://files.pythonhosted.org/packages/20/f2/805ad600fc59ebe4f1ba6129cd3a75fb0da126975c8579b8f57abeb61e80/pillow-11.2.1-cp311-cp311-manylinux_2_28_x86_64.whl", hash = "sha256:8f4f3724c068be008c08257207210c138d5f3731af6c155a81c2b09a9eb3a788", size = 4607069, upload-time = "2025-04-12T17:47:46.46Z" },
+    { url = "https://files.pythonhosted.org/packages/71/6b/4ef8a288b4bb2e0180cba13ca0a519fa27aa982875882392b65131401099/pillow-11.2.1-cp311-cp311-musllinux_1_2_aarch64.whl", hash = "sha256:a0a6709b47019dff32e678bc12c63008311b82b9327613f534e496dacaefb71e", size = 4583460, upload-time = "2025-04-12T17:47:49.255Z" },
+    { url = "https://files.pythonhosted.org/packages/62/ae/f29c705a09cbc9e2a456590816e5c234382ae5d32584f451c3eb41a62062/pillow-11.2.1-cp311-cp311-musllinux_1_2_x86_64.whl", hash = "sha256:f6b0c664ccb879109ee3ca702a9272d877f4fcd21e5eb63c26422fd6e415365e", size = 4661304, upload-time = "2025-04-12T17:47:51.067Z" },
+    { url = "https://files.pythonhosted.org/packages/6e/1a/c8217b6f2f73794a5e219fbad087701f412337ae6dbb956db37d69a9bc43/pillow-11.2.1-cp311-cp311-win32.whl", hash = "sha256:cc5d875d56e49f112b6def6813c4e3d3036d269c008bf8aef72cd08d20ca6df6", size = 2331809, upload-time = "2025-04-12T17:47:54.425Z" },
+    { url = "https://files.pythonhosted.org/packages/e2/72/25a8f40170dc262e86e90f37cb72cb3de5e307f75bf4b02535a61afcd519/pillow-11.2.1-cp311-cp311-win_amd64.whl", hash = "sha256:0f5c7eda47bf8e3c8a283762cab94e496ba977a420868cb819159980b6709193", size = 2676338, upload-time = "2025-04-12T17:47:56.535Z" },
+    { url = "https://files.pythonhosted.org/packages/06/9e/76825e39efee61efea258b479391ca77d64dbd9e5804e4ad0fa453b4ba55/pillow-11.2.1-cp311-cp311-win_arm64.whl", hash = "sha256:4d375eb838755f2528ac8cbc926c3e31cc49ca4ad0cf79cff48b20e30634a4a7", size = 2414918, upload-time = "2025-04-12T17:47:58.217Z" },
+    { url = "https://files.pythonhosted.org/packages/c7/40/052610b15a1b8961f52537cc8326ca6a881408bc2bdad0d852edeb6ed33b/pillow-11.2.1-cp312-cp312-macosx_10_13_x86_64.whl", hash = "sha256:78afba22027b4accef10dbd5eed84425930ba41b3ea0a86fa8d20baaf19d807f", size = 3190185, upload-time = "2025-04-12T17:48:00.417Z" },
+    { url = "https://files.pythonhosted.org/packages/e5/7e/b86dbd35a5f938632093dc40d1682874c33dcfe832558fc80ca56bfcb774/pillow-11.2.1-cp312-cp312-macosx_11_0_arm64.whl", hash = "sha256:78092232a4ab376a35d68c4e6d5e00dfd73454bd12b230420025fbe178ee3b0b", size = 3030306, upload-time = "2025-04-12T17:48:02.391Z" },
+    { url = "https://files.pythonhosted.org/packages/a4/5c/467a161f9ed53e5eab51a42923c33051bf8d1a2af4626ac04f5166e58e0c/pillow-11.2.1-cp312-cp312-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:25a5f306095c6780c52e6bbb6109624b95c5b18e40aab1c3041da3e9e0cd3e2d", size = 4416121, upload-time = "2025-04-12T17:48:04.554Z" },
+    { url = "https://files.pythonhosted.org/packages/62/73/972b7742e38ae0e2ac76ab137ca6005dcf877480da0d9d61d93b613065b4/pillow-11.2.1-cp312-cp312-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:0c7b29dbd4281923a2bfe562acb734cee96bbb129e96e6972d315ed9f232bef4", size = 4501707, upload-time = "2025-04-12T17:48:06.831Z" },
+    { url = "https://files.pythonhosted.org/packages/e4/3a/427e4cb0b9e177efbc1a84798ed20498c4f233abde003c06d2650a6d60cb/pillow-11.2.1-cp312-cp312-manylinux_2_28_aarch64.whl", hash = "sha256:3e645b020f3209a0181a418bffe7b4a93171eef6c4ef6cc20980b30bebf17b7d", size = 4522921, upload-time = "2025-04-12T17:48:09.229Z" },
+    { url = "https://files.pythonhosted.org/packages/fe/7c/d8b1330458e4d2f3f45d9508796d7caf0c0d3764c00c823d10f6f1a3b76d/pillow-11.2.1-cp312-cp312-manylinux_2_28_x86_64.whl", hash = "sha256:b2dbea1012ccb784a65349f57bbc93730b96e85b42e9bf7b01ef40443db720b4", size = 4612523, upload-time = "2025-04-12T17:48:11.631Z" },
+    { url = "https://files.pythonhosted.org/packages/b3/2f/65738384e0b1acf451de5a573d8153fe84103772d139e1e0bdf1596be2ea/pillow-11.2.1-cp312-cp312-musllinux_1_2_aarch64.whl", hash = "sha256:da3104c57bbd72948d75f6a9389e6727d2ab6333c3617f0a89d72d4940aa0443", size = 4587836, upload-time = "2025-04-12T17:48:13.592Z" },
+    { url = "https://files.pythonhosted.org/packages/6a/c5/e795c9f2ddf3debb2dedd0df889f2fe4b053308bb59a3cc02a0cd144d641/pillow-11.2.1-cp312-cp312-musllinux_1_2_x86_64.whl", hash = "sha256:598174aef4589af795f66f9caab87ba4ff860ce08cd5bb447c6fc553ffee603c", size = 4669390, upload-time = "2025-04-12T17:48:15.938Z" },
+    { url = "https://files.pythonhosted.org/packages/96/ae/ca0099a3995976a9fce2f423166f7bff9b12244afdc7520f6ed38911539a/pillow-11.2.1-cp312-cp312-win32.whl", hash = "sha256:1d535df14716e7f8776b9e7fee118576d65572b4aad3ed639be9e4fa88a1cad3", size = 2332309, upload-time = "2025-04-12T17:48:17.885Z" },
+    { url = "https://files.pythonhosted.org/packages/7c/18/24bff2ad716257fc03da964c5e8f05d9790a779a8895d6566e493ccf0189/pillow-11.2.1-cp312-cp312-win_amd64.whl", hash = "sha256:14e33b28bf17c7a38eede290f77db7c664e4eb01f7869e37fa98a5aa95978941", size = 2676768, upload-time = "2025-04-12T17:48:19.655Z" },
+    { url = "https://files.pythonhosted.org/packages/da/bb/e8d656c9543276517ee40184aaa39dcb41e683bca121022f9323ae11b39d/pillow-11.2.1-cp312-cp312-win_arm64.whl", hash = "sha256:21e1470ac9e5739ff880c211fc3af01e3ae505859392bf65458c224d0bf283eb", size = 2415087, upload-time = "2025-04-12T17:48:21.991Z" },
+    { url = "https://files.pythonhosted.org/packages/36/9c/447528ee3776e7ab8897fe33697a7ff3f0475bb490c5ac1456a03dc57956/pillow-11.2.1-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:fdec757fea0b793056419bca3e9932eb2b0ceec90ef4813ea4c1e072c389eb28", size = 3190098, upload-time = "2025-04-12T17:48:23.915Z" },
+    { url = "https://files.pythonhosted.org/packages/b5/09/29d5cd052f7566a63e5b506fac9c60526e9ecc553825551333e1e18a4858/pillow-11.2.1-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:b0e130705d568e2f43a17bcbe74d90958e8a16263868a12c3e0d9c8162690830", size = 3030166, upload-time = "2025-04-12T17:48:25.738Z" },
+    { url = "https://files.pythonhosted.org/packages/71/5d/446ee132ad35e7600652133f9c2840b4799bbd8e4adba881284860da0a36/pillow-11.2.1-cp313-cp313-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:7bdb5e09068332578214cadd9c05e3d64d99e0e87591be22a324bdbc18925be0", size = 4408674, upload-time = "2025-04-12T17:48:27.908Z" },
+    { url = "https://files.pythonhosted.org/packages/69/5f/cbe509c0ddf91cc3a03bbacf40e5c2339c4912d16458fcb797bb47bcb269/pillow-11.2.1-cp313-cp313-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:d189ba1bebfbc0c0e529159631ec72bb9e9bc041f01ec6d3233d6d82eb823bc1", size = 4496005, upload-time = "2025-04-12T17:48:29.888Z" },
+    { url = "https://files.pythonhosted.org/packages/f9/b3/dd4338d8fb8a5f312021f2977fb8198a1184893f9b00b02b75d565c33b51/pillow-11.2.1-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:191955c55d8a712fab8934a42bfefbf99dd0b5875078240943f913bb66d46d9f", size = 4518707, upload-time = "2025-04-12T17:48:31.874Z" },
+    { url = "https://files.pythonhosted.org/packages/13/eb/2552ecebc0b887f539111c2cd241f538b8ff5891b8903dfe672e997529be/pillow-11.2.1-cp313-cp313-manylinux_2_28_x86_64.whl", hash = "sha256:ad275964d52e2243430472fc5d2c2334b4fc3ff9c16cb0a19254e25efa03a155", size = 4610008, upload-time = "2025-04-12T17:48:34.422Z" },
+    { url = "https://files.pythonhosted.org/packages/72/d1/924ce51bea494cb6e7959522d69d7b1c7e74f6821d84c63c3dc430cbbf3b/pillow-11.2.1-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:750f96efe0597382660d8b53e90dd1dd44568a8edb51cb7f9d5d918b80d4de14", size = 4585420, upload-time = "2025-04-12T17:48:37.641Z" },
+    { url = "https://files.pythonhosted.org/packages/43/ab/8f81312d255d713b99ca37479a4cb4b0f48195e530cdc1611990eb8fd04b/pillow-11.2.1-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:fe15238d3798788d00716637b3d4e7bb6bde18b26e5d08335a96e88564a36b6b", size = 4667655, upload-time = "2025-04-12T17:48:39.652Z" },
+    { url = "https://files.pythonhosted.org/packages/94/86/8f2e9d2dc3d308dfd137a07fe1cc478df0a23d42a6c4093b087e738e4827/pillow-11.2.1-cp313-cp313-win32.whl", hash = "sha256:3fe735ced9a607fee4f481423a9c36701a39719252a9bb251679635f99d0f7d2", size = 2332329, upload-time = "2025-04-12T17:48:41.765Z" },
+    { url = "https://files.pythonhosted.org/packages/6d/ec/1179083b8d6067a613e4d595359b5fdea65d0a3b7ad623fee906e1b3c4d2/pillow-11.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:74ee3d7ecb3f3c05459ba95eed5efa28d6092d751ce9bf20e3e253a4e497e691", size = 2676388, upload-time = "2025-04-12T17:48:43.625Z" },
+    { url = "https://files.pythonhosted.org/packages/23/f1/2fc1e1e294de897df39fa8622d829b8828ddad938b0eaea256d65b84dd72/pillow-11.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:5119225c622403afb4b44bad4c1ca6c1f98eed79db8d3bc6e4e160fc6339d66c", size = 2414950, upload-time = "2025-04-12T17:48:45.475Z" },
+    { url = "https://files.pythonhosted.org/packages/c4/3e/c328c48b3f0ead7bab765a84b4977acb29f101d10e4ef57a5e3400447c03/pillow-11.2.1-cp313-cp313t-macosx_10_13_x86_64.whl", hash = "sha256:8ce2e8411c7aaef53e6bb29fe98f28cd4fbd9a1d9be2eeea434331aac0536b22", size = 3192759, upload-time = "2025-04-12T17:48:47.866Z" },
+    { url = "https://files.pythonhosted.org/packages/18/0e/1c68532d833fc8b9f404d3a642991441d9058eccd5606eab31617f29b6d4/pillow-11.2.1-cp313-cp313t-macosx_11_0_arm64.whl", hash = "sha256:9ee66787e095127116d91dea2143db65c7bb1e232f617aa5957c0d9d2a3f23a7", size = 3033284, upload-time = "2025-04-12T17:48:50.189Z" },
+    { url = "https://files.pythonhosted.org/packages/b7/cb/6faf3fb1e7705fd2db74e070f3bf6f88693601b0ed8e81049a8266de4754/pillow-11.2.1-cp313-cp313t-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:9622e3b6c1d8b551b6e6f21873bdcc55762b4b2126633014cea1803368a9aa16", size = 4445826, upload-time = "2025-04-12T17:48:52.346Z" },
+    { url = "https://files.pythonhosted.org/packages/07/94/8be03d50b70ca47fb434a358919d6a8d6580f282bbb7af7e4aa40103461d/pillow-11.2.1-cp313-cp313t-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:63b5dff3a68f371ea06025a1a6966c9a1e1ee452fc8020c2cd0ea41b83e9037b", size = 4527329, upload-time = "2025-04-12T17:48:54.403Z" },
+    { url = "https://files.pythonhosted.org/packages/fd/a4/bfe78777076dc405e3bd2080bc32da5ab3945b5a25dc5d8acaa9de64a162/pillow-11.2.1-cp313-cp313t-manylinux_2_28_aarch64.whl", hash = "sha256:31df6e2d3d8fc99f993fd253e97fae451a8db2e7207acf97859732273e108406", size = 4549049, upload-time = "2025-04-12T17:48:56.383Z" },
+    { url = "https://files.pythonhosted.org/packages/65/4d/eaf9068dc687c24979e977ce5677e253624bd8b616b286f543f0c1b91662/pillow-11.2.1-cp313-cp313t-manylinux_2_28_x86_64.whl", hash = "sha256:062b7a42d672c45a70fa1f8b43d1d38ff76b63421cbbe7f88146b39e8a558d91", size = 4635408, upload-time = "2025-04-12T17:48:58.782Z" },
+    { url = "https://files.pythonhosted.org/packages/1d/26/0fd443365d9c63bc79feb219f97d935cd4b93af28353cba78d8e77b61719/pillow-11.2.1-cp313-cp313t-musllinux_1_2_aarch64.whl", hash = "sha256:4eb92eca2711ef8be42fd3f67533765d9fd043b8c80db204f16c8ea62ee1a751", size = 4614863, upload-time = "2025-04-12T17:49:00.709Z" },
+    { url = "https://files.pythonhosted.org/packages/49/65/dca4d2506be482c2c6641cacdba5c602bc76d8ceb618fd37de855653a419/pillow-11.2.1-cp313-cp313t-musllinux_1_2_x86_64.whl", hash = "sha256:f91ebf30830a48c825590aede79376cb40f110b387c17ee9bd59932c961044f9", size = 4692938, upload-time = "2025-04-12T17:49:02.946Z" },
+    { url = "https://files.pythonhosted.org/packages/b3/92/1ca0c3f09233bd7decf8f7105a1c4e3162fb9142128c74adad0fb361b7eb/pillow-11.2.1-cp313-cp313t-win32.whl", hash = "sha256:e0b55f27f584ed623221cfe995c912c61606be8513bfa0e07d2c674b4516d9dd", size = 2335774, upload-time = "2025-04-12T17:49:04.889Z" },
+    { url = "https://files.pythonhosted.org/packages/a5/ac/77525347cb43b83ae905ffe257bbe2cc6fd23acb9796639a1f56aa59d191/pillow-11.2.1-cp313-cp313t-win_amd64.whl", hash = "sha256:36d6b82164c39ce5482f649b437382c0fb2395eabc1e2b1702a6deb8ad647d6e", size = 2681895, upload-time = "2025-04-12T17:49:06.635Z" },
+    { url = "https://files.pythonhosted.org/packages/67/32/32dc030cfa91ca0fc52baebbba2e009bb001122a1daa8b6a79ad830b38d3/pillow-11.2.1-cp313-cp313t-win_arm64.whl", hash = "sha256:225c832a13326e34f212d2072982bb1adb210e0cc0b153e688743018c94a2681", size = 2417234, upload-time = "2025-04-12T17:49:08.399Z" },
+    { url = "https://files.pythonhosted.org/packages/a4/ad/2613c04633c7257d9481ab21d6b5364b59fc5d75faafd7cb8693523945a3/pillow-11.2.1-pp311-pypy311_pp73-macosx_10_15_x86_64.whl", hash = "sha256:80f1df8dbe9572b4b7abdfa17eb5d78dd620b1d55d9e25f834efdbee872d3aed", size = 3181734, upload-time = "2025-04-12T17:49:46.789Z" },
+    { url = "https://files.pythonhosted.org/packages/a4/fd/dcdda4471ed667de57bb5405bb42d751e6cfdd4011a12c248b455c778e03/pillow-11.2.1-pp311-pypy311_pp73-macosx_11_0_arm64.whl", hash = "sha256:ea926cfbc3957090becbcbbb65ad177161a2ff2ad578b5a6ec9bb1e1cd78753c", size = 2999841, upload-time = "2025-04-12T17:49:48.812Z" },
+    { url = "https://files.pythonhosted.org/packages/ac/89/8a2536e95e77432833f0db6fd72a8d310c8e4272a04461fb833eb021bf94/pillow-11.2.1-pp311-pypy311_pp73-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:738db0e0941ca0376804d4de6a782c005245264edaa253ffce24e5a15cbdc7bd", size = 3437470, upload-time = "2025-04-12T17:49:50.831Z" },
+    { url = "https://files.pythonhosted.org/packages/9d/8f/abd47b73c60712f88e9eda32baced7bfc3e9bd6a7619bb64b93acff28c3e/pillow-11.2.1-pp311-pypy311_pp73-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:9db98ab6565c69082ec9b0d4e40dd9f6181dab0dd236d26f7a50b8b9bfbd5076", size = 3460013, upload-time = "2025-04-12T17:49:53.278Z" },
+    { url = "https://files.pythonhosted.org/packages/f6/20/5c0a0aa83b213b7a07ec01e71a3d6ea2cf4ad1d2c686cc0168173b6089e7/pillow-11.2.1-pp311-pypy311_pp73-manylinux_2_28_aarch64.whl", hash = "sha256:036e53f4170e270ddb8797d4c590e6dd14d28e15c7da375c18978045f7e6c37b", size = 3527165, upload-time = "2025-04-12T17:49:55.164Z" },
+    { url = "https://files.pythonhosted.org/packages/58/0e/2abab98a72202d91146abc839e10c14f7cf36166f12838ea0c4db3ca6ecb/pillow-11.2.1-pp311-pypy311_pp73-manylinux_2_28_x86_64.whl", hash = "sha256:14f73f7c291279bd65fda51ee87affd7c1e097709f7fdd0188957a16c264601f", size = 3571586, upload-time = "2025-04-12T17:49:57.171Z" },
+    { url = "https://files.pythonhosted.org/packages/21/2c/5e05f58658cf49b6667762cca03d6e7d85cededde2caf2ab37b81f80e574/pillow-11.2.1-pp311-pypy311_pp73-win_amd64.whl", hash = "sha256:208653868d5c9ecc2b327f9b9ef34e0e42a4cdd172c2988fd81d62d2bc9bc044", size = 2674751, upload-time = "2025-04-12T17:49:59.628Z" },
+]
+
+[[package]]
+name = "pluggy"
+version = "1.6.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/f9/e2/3e91f31a7d2b083fe6ef3fa267035b518369d9511ffab804f839851d2779/pluggy-1.6.0.tar.gz", hash = "sha256:7dcc130b76258d33b90f61b658791dede3486c3e6bfb003ee5c9bfb396dd22f3", size = 69412, upload-time = "2025-05-15T12:30:07.975Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/54/20/4d324d65cc6d9205fabedc306948156824eb9f0ee1633355a8f7ec5c66bf/pluggy-1.6.0-py3-none-any.whl", hash = "sha256:e920276dd6813095e9377c0bc5566d94c932c33b27a3e3945d8389c374dd4746", size = 20538, upload-time = "2025-05-15T12:30:06.134Z" },
+]
+
+[[package]]
+name = "pygments"
+version = "2.19.2"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/b0/77/a5b8c569bf593b0140bde72ea885a803b82086995367bf2037de0159d924/pygments-2.19.2.tar.gz", hash = "sha256:636cb2477cec7f8952536970bc533bc43743542f70392ae026374600add5b887", size = 4968631, upload-time = "2025-06-21T13:39:12.283Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/c7/21/705964c7812476f378728bdf590ca4b771ec72385c533964653c68e86bdc/pygments-2.19.2-py3-none-any.whl", hash = "sha256:86540386c03d588bb81d44bc3928634ff26449851e99741617ecb9037ee5ec0b", size = 1225217, upload-time = "2025-06-21T13:39:07.939Z" },
+]
+
+[[package]]
+name = "pytest"
+version = "8.4.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "colorama", marker = "sys_platform == 'win32'" },
+    { name = "iniconfig" },
+    { name = "packaging" },
+    { name = "pluggy" },
+    { name = "pygments" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/08/ba/45911d754e8eba3d5a841a5ce61a65a685ff1798421ac054f85aa8747dfb/pytest-8.4.1.tar.gz", hash = "sha256:7c67fd69174877359ed9371ec3af8a3d2b04741818c51e5e99cc1742251fa93c", size = 1517714, upload-time = "2025-06-18T05:48:06.109Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/29/16/c8a903f4c4dffe7a12843191437d7cd8e32751d5de349d45d3fe69544e87/pytest-8.4.1-py3-none-any.whl", hash = "sha256:539c70ba6fcead8e78eebbf1115e8b589e7565830d7d006a8723f19ac8a0afb7", size = 365474, upload-time = "2025-06-18T05:48:03.955Z" },
+]
+
+[[package]]
+name = "pytest-cov"
+version = "6.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "coverage", extra = ["toml"] },
+    { name = "pluggy" },
+    { name = "pytest" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/18/99/668cade231f434aaa59bbfbf49469068d2ddd945000621d3d165d2e7dd7b/pytest_cov-6.2.1.tar.gz", hash = "sha256:25cc6cc0a5358204b8108ecedc51a9b57b34cc6b8c967cc2c01a4e00d8a67da2", size = 69432, upload-time = "2025-06-12T10:47:47.684Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/bc/16/4ea354101abb1287856baa4af2732be351c7bee728065aed451b678153fd/pytest_cov-6.2.1-py3-none-any.whl", hash = "sha256:f5bc4c23f42f1cdd23c70b1dab1bbaef4fc505ba950d53e0081d0730dd7e86d5", size = 24644, upload-time = "2025-06-12T10:47:45.932Z" },
+]
+
+[[package]]
+name = "tomli"
+version = "2.2.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/18/87/302344fed471e44a87289cf4967697d07e532f2421fdaf868a303cbae4ff/tomli-2.2.1.tar.gz", hash = "sha256:cd45e1dc79c835ce60f7404ec8119f2eb06d38b1deba146f07ced3bbc44505ff", size = 17175, upload-time = "2024-11-27T22:38:36.873Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/43/ca/75707e6efa2b37c77dadb324ae7d9571cb424e61ea73fad7c56c2d14527f/tomli-2.2.1-cp311-cp311-macosx_10_9_x86_64.whl", hash = "sha256:678e4fa69e4575eb77d103de3df8a895e1591b48e740211bd1067378c69e8249", size = 131077, upload-time = "2024-11-27T22:37:54.956Z" },
+    { url = "https://files.pythonhosted.org/packages/c7/16/51ae563a8615d472fdbffc43a3f3d46588c264ac4f024f63f01283becfbb/tomli-2.2.1-cp311-cp311-macosx_11_0_arm64.whl", hash = "sha256:023aa114dd824ade0100497eb2318602af309e5a55595f76b626d6d9f3b7b0a6", size = 123429, upload-time = "2024-11-27T22:37:56.698Z" },
+    { url = "https://files.pythonhosted.org/packages/f1/dd/4f6cd1e7b160041db83c694abc78e100473c15d54620083dbd5aae7b990e/tomli-2.2.1-cp311-cp311-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:ece47d672db52ac607a3d9599a9d48dcb2f2f735c6c2d1f34130085bb12b112a", size = 226067, upload-time = "2024-11-27T22:37:57.63Z" },
+    { url = "https://files.pythonhosted.org/packages/a9/6b/c54ede5dc70d648cc6361eaf429304b02f2871a345bbdd51e993d6cdf550/tomli-2.2.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:6972ca9c9cc9f0acaa56a8ca1ff51e7af152a9f87fb64623e31d5c83700080ee", size = 236030, upload-time = "2024-11-27T22:37:59.344Z" },
+    { url = "https://files.pythonhosted.org/packages/1f/47/999514fa49cfaf7a92c805a86c3c43f4215621855d151b61c602abb38091/tomli-2.2.1-cp311-cp311-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:c954d2250168d28797dd4e3ac5cf812a406cd5a92674ee4c8f123c889786aa8e", size = 240898, upload-time = "2024-11-27T22:38:00.429Z" },
+    { url = "https://files.pythonhosted.org/packages/73/41/0a01279a7ae09ee1573b423318e7934674ce06eb33f50936655071d81a24/tomli-2.2.1-cp311-cp311-musllinux_1_2_aarch64.whl", hash = "sha256:8dd28b3e155b80f4d54beb40a441d366adcfe740969820caf156c019fb5c7ec4", size = 229894, upload-time = "2024-11-27T22:38:02.094Z" },
+    { url = "https://files.pythonhosted.org/packages/55/18/5d8bc5b0a0362311ce4d18830a5d28943667599a60d20118074ea1b01bb7/tomli-2.2.1-cp311-cp311-musllinux_1_2_i686.whl", hash = "sha256:e59e304978767a54663af13c07b3d1af22ddee3bb2fb0618ca1593e4f593a106", size = 245319, upload-time = "2024-11-27T22:38:03.206Z" },
+    { url = "https://files.pythonhosted.org/packages/92/a3/7ade0576d17f3cdf5ff44d61390d4b3febb8a9fc2b480c75c47ea048c646/tomli-2.2.1-cp311-cp311-musllinux_1_2_x86_64.whl", hash = "sha256:33580bccab0338d00994d7f16f4c4ec25b776af3ffaac1ed74e0b3fc95e885a8", size = 238273, upload-time = "2024-11-27T22:38:04.217Z" },
+    { url = "https://files.pythonhosted.org/packages/72/6f/fa64ef058ac1446a1e51110c375339b3ec6be245af9d14c87c4a6412dd32/tomli-2.2.1-cp311-cp311-win32.whl", hash = "sha256:465af0e0875402f1d226519c9904f37254b3045fc5084697cefb9bdde1ff99ff", size = 98310, upload-time = "2024-11-27T22:38:05.908Z" },
+    { url = "https://files.pythonhosted.org/packages/6a/1c/4a2dcde4a51b81be3530565e92eda625d94dafb46dbeb15069df4caffc34/tomli-2.2.1-cp311-cp311-win_amd64.whl", hash = "sha256:2d0f2fdd22b02c6d81637a3c95f8cd77f995846af7414c5c4b8d0545afa1bc4b", size = 108309, upload-time = "2024-11-27T22:38:06.812Z" },
+    { url = "https://files.pythonhosted.org/packages/52/e1/f8af4c2fcde17500422858155aeb0d7e93477a0d59a98e56cbfe75070fd0/tomli-2.2.1-cp312-cp312-macosx_10_13_x86_64.whl", hash = "sha256:4a8f6e44de52d5e6c657c9fe83b562f5f4256d8ebbfe4ff922c495620a7f6cea", size = 132762, upload-time = "2024-11-27T22:38:07.731Z" },
+    { url = "https://files.pythonhosted.org/packages/03/b8/152c68bb84fc00396b83e7bbddd5ec0bd3dd409db4195e2a9b3e398ad2e3/tomli-2.2.1-cp312-cp312-macosx_11_0_arm64.whl", hash = "sha256:8d57ca8095a641b8237d5b079147646153d22552f1c637fd3ba7f4b0b29167a8", size = 123453, upload-time = "2024-11-27T22:38:09.384Z" },
+    { url = "https://files.pythonhosted.org/packages/c8/d6/fc9267af9166f79ac528ff7e8c55c8181ded34eb4b0e93daa767b8841573/tomli-2.2.1-cp312-cp312-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:4e340144ad7ae1533cb897d406382b4b6fede8890a03738ff1683af800d54192", size = 233486, upload-time = "2024-11-27T22:38:10.329Z" },
+    { url = "https://files.pythonhosted.org/packages/5c/51/51c3f2884d7bab89af25f678447ea7d297b53b5a3b5730a7cb2ef6069f07/tomli-2.2.1-cp312-cp312-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:db2b95f9de79181805df90bedc5a5ab4c165e6ec3fe99f970d0e302f384ad222", size = 242349, upload-time = "2024-11-27T22:38:11.443Z" },
+    { url = "https://files.pythonhosted.org/packages/ab/df/bfa89627d13a5cc22402e441e8a931ef2108403db390ff3345c05253935e/tomli-2.2.1-cp312-cp312-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:40741994320b232529c802f8bc86da4e1aa9f413db394617b9a256ae0f9a7f77", size = 252159, upload-time = "2024-11-27T22:38:13.099Z" },
+    { url = "https://files.pythonhosted.org/packages/9e/6e/fa2b916dced65763a5168c6ccb91066f7639bdc88b48adda990db10c8c0b/tomli-2.2.1-cp312-cp312-musllinux_1_2_aarch64.whl", hash = "sha256:400e720fe168c0f8521520190686ef8ef033fb19fc493da09779e592861b78c6", size = 237243, upload-time = "2024-11-27T22:38:14.766Z" },
+    { url = "https://files.pythonhosted.org/packages/b4/04/885d3b1f650e1153cbb93a6a9782c58a972b94ea4483ae4ac5cedd5e4a09/tomli-2.2.1-cp312-cp312-musllinux_1_2_i686.whl", hash = "sha256:02abe224de6ae62c19f090f68da4e27b10af2b93213d36cf44e6e1c5abd19fdd", size = 259645, upload-time = "2024-11-27T22:38:15.843Z" },
+    { url = "https://files.pythonhosted.org/packages/9c/de/6b432d66e986e501586da298e28ebeefd3edc2c780f3ad73d22566034239/tomli-2.2.1-cp312-cp312-musllinux_1_2_x86_64.whl", hash = "sha256:b82ebccc8c8a36f2094e969560a1b836758481f3dc360ce9a3277c65f374285e", size = 244584, upload-time = "2024-11-27T22:38:17.645Z" },
+    { url = "https://files.pythonhosted.org/packages/1c/9a/47c0449b98e6e7d1be6cbac02f93dd79003234ddc4aaab6ba07a9a7482e2/tomli-2.2.1-cp312-cp312-win32.whl", hash = "sha256:889f80ef92701b9dbb224e49ec87c645ce5df3fa2cc548664eb8a25e03127a98", size = 98875, upload-time = "2024-11-27T22:38:19.159Z" },
+    { url = "https://files.pythonhosted.org/packages/ef/60/9b9638f081c6f1261e2688bd487625cd1e660d0a85bd469e91d8db969734/tomli-2.2.1-cp312-cp312-win_amd64.whl", hash = "sha256:7fc04e92e1d624a4a63c76474610238576942d6b8950a2d7f908a340494e67e4", size = 109418, upload-time = "2024-11-27T22:38:20.064Z" },
+    { url = "https://files.pythonhosted.org/packages/04/90/2ee5f2e0362cb8a0b6499dc44f4d7d48f8fff06d28ba46e6f1eaa61a1388/tomli-2.2.1-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:f4039b9cbc3048b2416cc57ab3bda989a6fcf9b36cf8937f01a6e731b64f80d7", size = 132708, upload-time = "2024-11-27T22:38:21.659Z" },
+    { url = "https://files.pythonhosted.org/packages/c0/ec/46b4108816de6b385141f082ba99e315501ccd0a2ea23db4a100dd3990ea/tomli-2.2.1-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:286f0ca2ffeeb5b9bd4fcc8d6c330534323ec51b2f52da063b11c502da16f30c", size = 123582, upload-time = "2024-11-27T22:38:22.693Z" },
+    { url = "https://files.pythonhosted.org/packages/a0/bd/b470466d0137b37b68d24556c38a0cc819e8febe392d5b199dcd7f578365/tomli-2.2.1-cp313-cp313-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:a92ef1a44547e894e2a17d24e7557a5e85a9e1d0048b0b5e7541f76c5032cb13", size = 232543, upload-time = "2024-11-27T22:38:24.367Z" },
+    { url = "https://files.pythonhosted.org/packages/d9/e5/82e80ff3b751373f7cead2815bcbe2d51c895b3c990686741a8e56ec42ab/tomli-2.2.1-cp313-cp313-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:9316dc65bed1684c9a98ee68759ceaed29d229e985297003e494aa825ebb0281", size = 241691, upload-time = "2024-11-27T22:38:26.081Z" },
+    { url = "https://files.pythonhosted.org/packages/05/7e/2a110bc2713557d6a1bfb06af23dd01e7dde52b6ee7dadc589868f9abfac/tomli-2.2.1-cp313-cp313-manylinux_2_5_i686.manylinux1_i686.manylinux_2_17_i686.manylinux2014_i686.whl", hash = "sha256:e85e99945e688e32d5a35c1ff38ed0b3f41f43fad8df0bdf79f72b2ba7bc5272", size = 251170, upload-time = "2024-11-27T22:38:27.921Z" },
+    { url = "https://files.pythonhosted.org/packages/64/7b/22d713946efe00e0adbcdfd6d1aa119ae03fd0b60ebed51ebb3fa9f5a2e5/tomli-2.2.1-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:ac065718db92ca818f8d6141b5f66369833d4a80a9d74435a268c52bdfa73140", size = 236530, upload-time = "2024-11-27T22:38:29.591Z" },
+    { url = "https://files.pythonhosted.org/packages/38/31/3a76f67da4b0cf37b742ca76beaf819dca0ebef26d78fc794a576e08accf/tomli-2.2.1-cp313-cp313-musllinux_1_2_i686.whl", hash = "sha256:d920f33822747519673ee656a4b6ac33e382eca9d331c87770faa3eef562aeb2", size = 258666, upload-time = "2024-11-27T22:38:30.639Z" },
+    { url = "https://files.pythonhosted.org/packages/07/10/5af1293da642aded87e8a988753945d0cf7e00a9452d3911dd3bb354c9e2/tomli-2.2.1-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:a198f10c4d1b1375d7687bc25294306e551bf1abfa4eace6650070a5c1ae2744", size = 243954, upload-time = "2024-11-27T22:38:31.702Z" },
+    { url = "https://files.pythonhosted.org/packages/5b/b9/1ed31d167be802da0fc95020d04cd27b7d7065cc6fbefdd2f9186f60d7bd/tomli-2.2.1-cp313-cp313-win32.whl", hash = "sha256:d3f5614314d758649ab2ab3a62d4f2004c825922f9e370b29416484086b264ec", size = 98724, upload-time = "2024-11-27T22:38:32.837Z" },
+    { url = "https://files.pythonhosted.org/packages/c7/32/b0963458706accd9afcfeb867c0f9175a741bf7b19cd424230714d722198/tomli-2.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:a38aa0308e754b0e3c67e344754dff64999ff9b513e691d0e786265c93583c69", size = 109383, upload-time = "2024-11-27T22:38:34.455Z" },
+    { url = "https://files.pythonhosted.org/packages/6e/c2/61d3e0f47e2b74ef40a68b9e6ad5984f6241a942f7cd3bbfbdbd03861ea9/tomli-2.2.1-py3-none-any.whl", hash = "sha256:cb55c73c5f4408779d0cf3eef9f762b9c9f147a77de7b258bef0a5628adc85cc", size = 14257, upload-time = "2024-11-27T22:38:35.385Z" },
+]
diff --git a/modules/programs/dx/dx.nix b/modules/programs/dx/dx.nix
new file mode 100644
index 00000000..8322c019
--- /dev/null
+++ b/modules/programs/dx/dx.nix
@@ -0,0 +1,29 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellScriptBin "dx" ''
+    [[ -f $EDITOR ]] || EDITOR=nvim
+    $EDITOR $(git rev-parse --show-toplevel)/flake.nix || echo "No toplevel file found"
+  '';
+in
+  delib.module {
+    name = "programs.dx";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = [
+        program
+      ];
+    };
+
+    darwin.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = [
+        program
+      ];
+    };
+  }
diff --git a/modules/programs/explorer/explorer.nix b/modules/programs/explorer/explorer.nix
new file mode 100644
index 00000000..804be062
--- /dev/null
+++ b/modules/programs/explorer/explorer.nix
@@ -0,0 +1,64 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  explorer-program = pkgs.kdePackages.dolphin.overrideAttrs (oldAttrs: {
+    meta.mainProgram = "dolphin";
+    nativeBuildInputs = (oldAttrs.nativeBuildInputs or []) ++ [pkgs.makeWrapper];
+    postInstall =
+      (oldAttrs.postInstall or "")
+      + ''
+        wrapProgram $out/bin/dolphin \
+            --set XDG_CONFIG_DIRS "${pkgs.libsForQt5.kservice}/etc/xdg:$XDG_CONFIG_DIRS" \
+            --prefix LD_LIBRARY_PATH : ${pkgs.lib.makeLibraryPath (with pkgs; [
+          pipewire
+          kdePackages.qtmultimedia
+          kdePackages.qtbase
+        ])} \
+            --run "${pkgs.kdePackages.kservice}/bin/kbuildsycoca6 --noincremental ${pkgs.libsForQt5.kservice}/etc/xdg/menus/applications.menu"
+      '';
+  });
+  program = pkgs.writeShellScriptBin "explorer" ''
+    ${pkgs.lib.getExe explorer-program} $@
+  '';
+
+  supporting-pkgs = with pkgs; [
+    lxmenu-data
+  ];
+
+  supporting-kde-pkgs = with pkgs.kdePackages; [
+    kactivitymanagerd
+    plasma-workspace
+    kservice
+    kded
+    kio-admin
+    kio-fuse
+  ];
+
+  supporting-libs = with pkgs.libsForQt5; [
+    kactivities
+    kactivities-stats
+  ];
+in
+  delib.module {
+    name = "programs.explorer";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages =
+        [
+          explorer-program
+          program
+        ]
+        ++ supporting-pkgs ++ supporting-libs ++ supporting-kde-pkgs;
+      services.dbus.packages = with pkgs; [
+        kdePackages.kactivitymanagerd # provides the org.kde.ActivityManager service file
+      ];
+    };
+
+    darwin.ifEnabled = {};
+  }
diff --git a/modules/programs/ghostty/default.nix b/modules/programs/ghostty/default.nix
new file mode 100644
index 00000000..00bcb991
--- /dev/null
+++ b/modules/programs/ghostty/default.nix
@@ -0,0 +1,65 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+  inherit (pkgs.stdenv) isDarwin isLinux;
+in
+  delib.module {
+    name = "programs.ghostty";
+
+    options = singleEnableOption false;
+
+    home.ifEnabled = {
+      # Deploy platform-specific configuration file via Home Manager
+      # The configuration will be symlinked to ~/.config/ghostty/config
+      xdg.configFile."ghostty/config" = {
+        source =
+          if isLinux
+          then ../../../.config/ghostty/ghostty.linux
+          else if isDarwin
+          then ../../../.config/ghostty/ghostty.macos
+          else ../../../.config/ghostty/ghostty.linux; # Default to Linux config for other platforms
+      };
+      # Alternative: Use XDG config to ensure directory
+      xdg.configFile."dconf/.keep" = {
+        text = "";
+        force = true;
+      };
+    };
+
+    # Deploy configuration at system level for NixOS
+    nixos.ifEnabled = {myconfig, ...}: let
+      # Get username from the constants module for consistency
+      inherit (myconfig.constants) username;
+
+      # Select the appropriate config file based on platform
+      ghosttyConfigFile = ../../../.config/ghostty/ghostty.linux;
+    in {
+      # Create symlink in user's home directory via activation script
+      # This ensures the config is properly linked after each rebuild
+      system.activationScripts.ghosttyConfig = {
+        text = ''
+          # Ensure the target directory exists with proper ownership
+          TARGET_DIR="/home/${username}/.config/ghostty"
+          if [[ ! -d "$TARGET_DIR" ]]; then
+            mkdir -p "$TARGET_DIR"
+            chown "${username}:users" "$TARGET_DIR"
+          fi
+
+          # Create or update the config symlink
+          # Using -f to force update if it already exists
+          CONFIG_LINK="$TARGET_DIR/config"
+          CONFIG_SOURCE="${ghosttyConfigFile}"
+
+          if ln -sf "$CONFIG_SOURCE" "$CONFIG_LINK"; then
+            chown -h "${username}:users" "$CONFIG_LINK"
+          else
+            echo "Warning: Failed to create Ghostty config symlink at $CONFIG_LINK" >&2
+          fi
+        '';
+        deps = [];
+      };
+    };
+  }
diff --git a/modules/programs/glaude/default.nix b/modules/programs/glaude/default.nix
new file mode 100644
index 00000000..865ca9e9
--- /dev/null
+++ b/modules/programs/glaude/default.nix
@@ -0,0 +1,29 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "glaude";
+    text = builtins.readFile ./glaude.sh;
+    excludeShellChecks = [
+      "SC2068"
+      "SC2155"
+    ];
+  };
+in
+  delib.module {
+    name = "programs.glaude";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/glaude/glaude.sh b/modules/programs/glaude/glaude.sh
new file mode 100644
index 00000000..886b591d
--- /dev/null
+++ b/modules/programs/glaude/glaude.sh
@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+PORT=1738 
+if ! lsof -iTCP:$PORT -sTCP:LISTEN >/dev/null 2>&1; then
+	PORT=1738 bunx antigravity-claude-proxy start > /dev/null 2>&1 &
+fi
+
+export ANTHROPIC_AUTH_TOKEN=test
+export ANTHROPIC_BASE_URL="http://localhost:$PORT"
+export ANTHROPIC_MODEL=claude-opus-4-5-thinking
+export ANTHROPIC_DEFAULT_OPUS_MODEL=claude-opus-4-5-thinking
+export ANTHROPIC_DEFAULT_SONNET_MODEL=claude-sonnet-4-5-thinking
+export ANTHROPIC_DEFAULT_HAIKU_MODEL=claude-sonnet-4-5
+export CLAUDE_CODE_SUBAGENT_MODEL=claude-sonnet-4-5-thinking
+
+claude --dangerously-skip-permissions $@
diff --git a/modules/programs/hyprss/default.nix b/modules/programs/hyprss/default.nix
new file mode 100644
index 00000000..dc9cb5db
--- /dev/null
+++ b/modules/programs/hyprss/default.nix
@@ -0,0 +1,27 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "hyprss";
+    text = ./hyprss.sh;
+    runtimeInputs = with pkgs; [
+      grim
+      wl-clipboard
+      sqlite
+      dunst
+    ];
+  };
+in
+  delib.module {
+    name = "programs.hyprss";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/hyprss/hyprss.sh b/modules/programs/hyprss/hyprss.sh
new file mode 100755
index 00000000..51a59e3d
--- /dev/null
+++ b/modules/programs/hyprss/hyprss.sh
@@ -0,0 +1,265 @@
+#!/usr/bin/env bash
+
+# Screenshot script with error handling and recent files integration
+# Dependencies: grim, slurp, wl-clipboard, dunst, sqlite3
+
+# Configuration
+SCREENSHOT_DIR="$HOME/Pictures"
+TIMESTAMP="$(date +%F_%T)"
+FILENAME="Screenshot-${TIMESTAMP}.png"
+FULL_PATH="${SCREENSHOT_DIR}/${FILENAME}"
+DB_PATH="$HOME/.local/share/kactivitymanagerd/resources/database"
+TEMP_FILE="/tmp/screenshot_temp_$$.png"
+
+# Color codes for notifications
+RED="#FF0000"
+GREEN="#00FF00"
+YELLOW="#FFFF00"
+
+# Function to send error notification
+error_notify() {
+    dunstify -u critical -h string:bgcolor:"$RED" "Screenshot Error" "$1" -t 3000
+}
+
+# Function to send success notification
+success_notify() {
+    local message="$1"
+    local file_path="$2"
+
+    # Send notification with action button and capture response
+    local action=$(dunstify -u normal -h string:bgcolor:"$GREEN" \
+                           -A "open,Open in Explorer" \
+                           "Screenshot" "$message" -t 5000)
+
+    # Handle the action response
+    if [[ "$action" == "open" ]]; then
+        if [[ -n "$EXPLORER" && -n "$file_path" ]]; then
+            "$EXPLORER" "$file_path" &
+        else
+            # Fallback to xdg-open if $EXPLORER is not set
+            xdg-open "$file_path" &
+        fi
+    fi
+}
+
+# Function to send warning notification
+warn_notify() {
+    dunstify -u normal -h string:bgcolor:"$YELLOW" "Screenshot Warning" "$1" -t 2000
+}
+
+# Function to add file to KDE recent files
+add_to_recent() {
+    local file_path="$1"
+    local file_uri="${file_path}"
+    local current_timestamp="$(date +%s)"
+    
+    # Check if database exists
+    if [[ ! -f "$DB_PATH" ]]; then
+        warn_notify "KDE Activities database not found. Skipping recent files update."
+        return 1
+    fi
+    
+    # Get the current activity ID (use :global if not found)
+    local activity_id
+    activity_id=$(sqlite3 "$DB_PATH" "SELECT id FROM Activities WHERE current = 1 LIMIT 1;" 2>/dev/null)
+    if [[ -z "$activity_id" ]]; then
+        activity_id="2affd499-c9f4-4d8f-9b1d-c95133e574a6"
+    fi
+    
+    # Add to recent files database with Unix timestamps
+    sqlite3 "$DB_PATH" 2>/dev/null <<EOF
+-- Add to ResourceEvent with Unix timestamps
+INSERT INTO ResourceEvent (
+    usedActivity,
+    initiatingAgent,
+    targettedResource,
+    start,
+    end
+) VALUES (
+    '${activity_id}',
+    'org.kde.dolphin',
+    '${file_uri}',
+    ${current_timestamp},
+    ${current_timestamp}
+);
+
+-- Update ResourceScoreCache with Unix timestamps
+INSERT OR REPLACE INTO ResourceScoreCache (
+    usedActivity,
+    initiatingAgent,
+    targettedResource,
+    scoreType,
+    cachedScore,
+    firstUpdate,
+    lastUpdate
+) VALUES (
+    '${activity_id}',
+    'org.kde.dolphin',
+    '${file_uri}',
+    0,
+    1.0,
+    ${current_timestamp},
+    ${current_timestamp}
+);
+
+-- Also add to ResourceInfo if it doesn't exist
+INSERT OR IGNORE INTO ResourceInfo (
+    targettedResource,
+    title,
+    mimetype,
+    autoTitle,
+    autoMimetype
+) VALUES (
+    '${file_uri}',
+    '${FILENAME}',
+    'image/png',
+    1,
+    1
+);
+
+-- Update ResourceLink
+INSERT OR REPLACE INTO ResourceLink (
+    usedActivity,
+    initiatingAgent,
+    targettedResource
+) VALUES (
+    '${activity_id}',
+    'org.kde.dolphin',
+    '${file_uri}'
+);
+EOF
+    
+    if [[ $? -eq 0 ]]; then
+        return 0
+    else
+        warn_notify "Failed to add to recent files database"
+        return 1
+    fi
+}
+
+# Check dependencies
+check_dependencies() {
+    local missing_deps=()
+    
+    for cmd in grim slurp wl-copy wl-paste dunstify sqlite3; do
+        if ! command -v "$cmd" &> /dev/null; then
+            missing_deps+=("$cmd")
+        fi
+    done
+    
+    if [[ ${#missing_deps[@]} -gt 0 ]]; then
+        error_notify "Missing dependencies: ${missing_deps[*]}"
+        exit 1
+    fi
+}
+
+# Create screenshot directory if it doesn't exist
+create_screenshot_dir() {
+    if [[ ! -d "$SCREENSHOT_DIR" ]]; then
+        mkdir -p "$SCREENSHOT_DIR" 2>/dev/null
+        if [[ $? -ne 0 ]]; then
+            error_notify "Failed to create screenshot directory: $SCREENSHOT_DIR"
+            exit 1
+        fi
+    fi
+}
+
+# Main screenshot function
+take_screenshot() {
+    # Get region selection
+    local region
+    region=$(slurp 2>/dev/null)
+    
+    # Check if user cancelled selection
+    if [[ -z "$region" ]]; then
+        warn_notify "Screenshot cancelled"
+        exit 0
+    fi
+    
+    # Take screenshot and save to temp file first
+    if ! grim -g "$region" "$TEMP_FILE" 2>/dev/null; then
+        error_notify "Failed to capture screenshot"
+        exit 1
+    fi
+    
+    # Check if screenshot file is valid and not empty
+    if [[ ! -s "$TEMP_FILE" ]]; then
+        error_notify "Screenshot file is empty"
+        rm -f "$TEMP_FILE" 2>/dev/null
+        exit 1
+    fi
+    
+    # Copy to clipboard
+    if ! wl-copy < "$TEMP_FILE" 2>/dev/null; then
+        warn_notify "Failed to copy to clipboard, but screenshot was saved"
+    fi
+    
+    # Move temp file to final destination
+    if ! mv "$TEMP_FILE" "$FULL_PATH" 2>/dev/null; then
+        error_notify "Failed to save screenshot to $FULL_PATH"
+        rm -f "$TEMP_FILE" 2>/dev/null
+        exit 1
+    fi
+    
+    # Set proper permissions
+    chmod 644 "$FULL_PATH" 2>/dev/null
+    
+    # Add to recent files
+    add_to_recent "$FULL_PATH"
+    
+    # Send success notification with clickable action
+    success_notify "Screenshot saved: $FILENAME" "$FULL_PATH"
+    
+    # Optional: Open in default viewer when clicking notification
+    # You can uncomment this if you want the notification to be actionable
+    # dunstify -u normal -h string:bgcolor:"$GREEN" \
+    #          -A "open,Open" \
+    #          "Screenshot" "Saved: $FILENAME" -t 2000 | {
+    #     read -r action
+    #     if [[ "$action" == "open" ]]; then
+    #         xdg-open "$FULL_PATH" &
+    #     fi
+    # }
+}
+
+# Cleanup function
+cleanup() {
+    rm -f "$TEMP_FILE" 2>/dev/null
+}
+
+# Set trap for cleanup on exit
+trap cleanup EXIT INT TERM
+
+# Main execution
+main() {
+    # Check all dependencies first
+    check_dependencies
+    
+    # Ensure screenshot directory exists
+    create_screenshot_dir
+    
+    # Take the screenshot
+    take_screenshot
+    
+    # Log to systemd journal if available
+    if command -v logger &> /dev/null; then
+        logger -t screenshot "Screenshot saved to $FULL_PATH"
+    fi
+    
+    # Optional: Refresh Dolphin's recent files view if it's running
+    # This sends a signal to refresh the view
+    if pgrep -x dolphin > /dev/null; then
+        qdbus org.kde.dolphin-* /dolphin/Dolphin_1 org.kde.dolphin.MainWindow.refreshViews 2>/dev/null || true
+    fi
+    
+    # Optional: Play sound on success (uncomment if you want audio feedback)
+    # if command -v paplay &> /dev/null; then
+    #     paplay /usr/share/sounds/freedesktop/stereo/camera-shutter.oga 2>/dev/null &
+    # fi
+}
+
+# Run main function
+main "$@"
+
+# Exit successfully
+exit 0
diff --git a/modules/programs/klaude/default.nix b/modules/programs/klaude/default.nix
new file mode 100644
index 00000000..901de684
--- /dev/null
+++ b/modules/programs/klaude/default.nix
@@ -0,0 +1,34 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "klaude";
+    text = builtins.readFile ./klaude.sh;
+    excludeShellChecks = [
+      "SC2068"
+      "SC2155"
+    ];
+    runtimeEnv = {
+      "ANTHROPIC_DEFAULT_HAIKU_MODEL" = "kimi-for-coding";
+      "ANTHROPIC_DEFAULT_SONNET_MODEL" = "kimi-for-coding";
+      "ANTHROPIC_DEFAULT_OPUS_MODEL" = "kimi-for-coding";
+    };
+  };
+in
+  delib.module {
+    name = "programs.klaude";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/klaude/klaude.sh b/modules/programs/klaude/klaude.sh
new file mode 100644
index 00000000..f30b365a
--- /dev/null
+++ b/modules/programs/klaude/klaude.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+export ANTHROPIC_BASE_URL=https://api.kimi.com/coding/
+export ANTHROPIC_AUTH_TOKEN=$(grep '^KIMI_API_KEY=' ~/dotfiles/.env | cut -d '=' -f 2)
+# export ANTHROPIC_SMALL_FAST_MODEL=kimi-for-coding
+# export ANTHROPIC_MODEL=kimi-for-coding
+export ANTHROPIC_MODEL=kimi-k2-thinking-turbo
+export ANTHROPIC_SMALL_FAST_MODEL=kimi-k2-thinking-turbo
+export ANTHROPIC_DEFAULT_OPUS_MODEL=kimi-k2-thinking-turbo
+export ANTHROPIC_DEFAULT_SONNET_MODEL=kimi-k2-thinking-turbo
+export ANTHROPIC_DEFAULT_HAIKU_MODEL=kimi-k2-thinking-turbo
+export CLAUDE_CODE_SUBAGENT_MODEL=kimi-k2-thinking-turbo
+
+claude --dangerously-skip-permissions $@
diff --git a/modules/programs/latest/default.nix b/modules/programs/latest/default.nix
new file mode 100644
index 00000000..38f1ec71
--- /dev/null
+++ b/modules/programs/latest/default.nix
@@ -0,0 +1,25 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "latest";
+    text = builtins.readFile ./latest.sh;
+  };
+in
+  delib.module {
+    name = "programs.latest";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/latest/latest.sh b/modules/programs/latest/latest.sh
new file mode 100644
index 00000000..70ce7780
--- /dev/null
+++ b/modules/programs/latest/latest.sh
@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+cldk "commit and push all my changes with good commit messages"
diff --git a/modules/programs/nvimf/default.nix b/modules/programs/nvimf/default.nix
new file mode 100644
index 00000000..7545f776
--- /dev/null
+++ b/modules/programs/nvimf/default.nix
@@ -0,0 +1,47 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.stdenv.mkDerivation {
+    name = "nvimf";
+    src = ./.;
+
+    nativeBuildInputs = with pkgs; [
+      makeWrapper
+      fzf
+      bat
+      neovim
+      fd
+    ];
+
+    installPhase = ''
+      mkdir -p $out/bin
+      cp nvimf $out/bin/
+      chmod +x $out/bin/nvimf
+
+      wrapProgram $out/bin/nvimf \
+        --prefix PATH : ${pkgs.lib.makeBinPath [
+        pkgs.fzf
+        pkgs.bat
+        pkgs.neovim
+        pkgs.fd
+      ]}
+    '';
+  };
+in
+  delib.module {
+    name = "programs.nvimf";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/nvimf/nvimf b/modules/programs/nvimf/nvimf
new file mode 100755
index 00000000..b98cd5fd
--- /dev/null
+++ b/modules/programs/nvimf/nvimf
@@ -0,0 +1,171 @@
+#!/usr/bin/env bash
+# nvimf - Interactive fuzzy file finder with preview that opens files in Neovim
+#
+# Description:
+#   Provides an interactive fuzzy file selection interface with syntax-highlighted
+#   preview using bat. Opens the selected file in Neovim upon confirmation.
+#
+# Usage:
+#   nvimf [directory]
+#
+# Features:
+#   - Fuzzy file search with fzf
+#   - Syntax-highlighted preview with bat
+#   - Graceful cancellation handling
+#   - Works in current directory or specified directory
+#
+# Dependencies:
+#   - fzf: Fuzzy finder
+#   - bat: Syntax highlighter for preview
+#   - neovim: Editor to open selected file
+
+set -euo pipefail
+
+# Color codes for output
+readonly RED='\033[0;31m'
+readonly GREEN='\033[0;32m'
+readonly YELLOW='\033[1;33m'
+readonly NC='\033[0m' # No Color
+
+# Function to print error messages
+error() {
+    echo -e "${RED}Error:${NC} $*" >&2
+}
+
+# Function to print info messages
+info() {
+    echo -e "${GREEN}Info:${NC} $*" >&2
+}
+
+# Function to check if a command exists
+command_exists() {
+    command -v "$1" >/dev/null 2>&1
+}
+
+# Function to validate dependencies
+check_dependencies() {
+    local missing_deps=()
+
+    for cmd in fzf bat nvim; do
+        if ! command_exists "$cmd"; then
+            missing_deps+=("$cmd")
+        fi
+    done
+
+    if [ ${#missing_deps[@]} -ne 0 ]; then
+        error "Missing required dependencies: ${missing_deps[*]}"
+        error "These should be provided by Nix wrapper, but are not in PATH"
+        exit 1
+    fi
+}
+
+# Function to display help
+show_help() {
+    cat << EOF
+nvimf - Interactive fuzzy file finder with Neovim
+
+Usage:
+    nvimf [directory]
+
+Description:
+    Opens an interactive fuzzy file finder with syntax-highlighted preview.
+    Select a file to open it in Neovim. Press ESC or Ctrl-C to cancel.
+
+Arguments:
+    directory    Optional directory to search (defaults to current directory)
+
+Key Bindings:
+    Enter        Open selected file in Neovim
+    ESC/Ctrl-C   Exit without opening a file
+    Up/Down      Navigate through files
+    Ctrl-U/D     Scroll preview window
+    Ctrl-/       Toggle preview window
+
+Examples:
+    nvimf                    # Search current directory
+    nvimf ~/projects         # Search specific directory
+    nvimf --help            # Show this help
+
+Dependencies:
+    fzf     Fuzzy finder for file selection
+    bat     Syntax highlighter for preview
+    nvim    Neovim editor
+EOF
+}
+
+# Main function
+main() {
+    # Check for help flag
+    if [ $# -gt 0 ] && { [ "$1" = "--help" ] || [ "$1" = "-h" ]; }; then
+        show_help
+        exit 0
+    fi
+
+    # Validate dependencies
+    check_dependencies
+
+    # Determine search directory
+    local search_dir="${1:-.}"
+
+    # Validate directory exists
+    if [ ! -d "$search_dir" ]; then
+        error "Directory does not exist: $search_dir"
+        exit 1
+    fi
+
+    # Change to search directory
+    cd "$search_dir" || {
+        error "Cannot access directory: $search_dir"
+        exit 1
+    }
+
+    # Run fzf with bat preview
+    # Uses fd if available, otherwise falls back to find
+    local selected_file
+    if command_exists fd; then
+        selected_file=$(fd --type f --hidden --exclude .git --exclude node_modules --exclude .cache \
+            | fzf --preview 'bat --color=always --style=numbers,changes --line-range :500 {}' \
+                  --preview-window=right:60%:wrap \
+                  --height=100% \
+                  --border \
+                  --prompt='Select file to edit: ' \
+                  --header='Enter=open | ESC=cancel | Ctrl-/=toggle preview' \
+                  --bind='ctrl-/:toggle-preview' \
+                  --color='header:italic:underline')
+    else
+        selected_file=$(find . -type f \
+                -not -path '*/\.git/*' \
+                -not -path '*/node_modules/*' \
+                -not -path '*/\.cache/*' \
+                -not -path '*/.next/*' \
+                -not -path '*/dist/*' \
+                -not -path '*/build/*' \
+            | sed 's|^\./||' \
+            | fzf --preview 'bat --color=always --style=numbers,changes --line-range :500 {}' \
+                  --preview-window=right:60%:wrap \
+                  --height=100% \
+                  --border \
+                  --prompt='Select file to edit: ' \
+                  --header='Enter=open | ESC=cancel | Ctrl-/=toggle preview' \
+                  --bind='ctrl-/:toggle-preview' \
+                  --color='header:italic:underline')
+    fi
+
+    # Check if a file was selected
+    if [ -z "${selected_file:-}" ]; then
+        info "No file selected, exiting gracefully"
+        exit 0
+    fi
+
+    # Verify file exists before opening
+    if [ ! -f "$selected_file" ]; then
+        error "Selected file does not exist: $selected_file"
+        exit 1
+    fi
+
+    # Open the file in Neovim
+    exec nvim "$selected_file"
+}
+
+# Run main function
+main "$@"
diff --git a/modules/programs/nviml/README.md b/modules/programs/nviml/README.md
new file mode 100644
index 00000000..125fa238
--- /dev/null
+++ b/modules/programs/nviml/README.md
@@ -0,0 +1,113 @@
+# nviml - Neovim Live Search
+
+A sophisticated terminal-based live grep tool that combines the speed of ripgrep with the interactivity of fzf and the syntax highlighting of bat. Search through codebases with real-time preview and open files directly in your editor.
+
+## Features
+
+- 🔍 **Live Search** - Real-time text search with instant results
+- 👀 **Enhanced Preview** - Syntax-highlighted file preview with context
+- 🎯 **Editor Integration** - Opens files at exact line in your preferred editor
+- 🧠 **Smart Filtering** - Excludes common build artifacts and dependency folders
+- 🎨 **Rich UI** - Colorized output with intuitive key bindings
+- ⚡ **High Performance** - Leverages ripgrep's multi-threaded search engine
+
+## Installation
+
+Enable via NixOS/Darwin configuration:
+
+```nix
+# Direct enablement
+myconfig.programs.nviml.enable = true;
+
+# Or automatically with engineer feature
+myconfig.features.engineer.enable = true;
+```
+
+## Usage
+
+### Basic Usage
+```bash
+nviml                       # Search current directory
+nviml ~/projects            # Search specific directory
+nviml --help               # Show comprehensive help
+```
+
+### Advanced Filtering
+```bash
+nviml -t py                 # Search only Python files
+nviml -g "*.js"             # Search only JavaScript files
+nviml -g "*.{ts,tsx}"       # Search TypeScript files
+nviml --type-add 'web:*.{html,css,js}' -t web
+                            # Define and use custom file types
+```
+
+### Search Patterns
+```bash
+nviml "function.*render"    # Regex search for render functions
+nviml -i "ERROR"            # Case-insensitive search
+nviml -w "TODO"             # Whole word search
+nviml -A 3 -B 3 "import"    # Search with context lines
+```
+
+## Key Bindings
+
+| Key | Action |
+|-----|--------|
+| `Enter` | Open file at matching line in editor |
+| `Ctrl-C` / `Esc` | Exit without opening file |
+| `Up/Down` | Navigate through search results |
+| `Page Up/Down` | Fast navigation through results |
+| `Ctrl-/` | Toggle preview window visibility |
+| `Ctrl-U/D` | Scroll preview window up/down |
+| `Ctrl-R` | Reload search with current parameters |
+
+## Environment Configuration
+
+```bash
+# Set preferred editor (defaults to nvim)
+export EDITOR="code"        # VS Code
+export EDITOR="vim"         # Vim
+export EDITOR="emacs"       # Emacs
+
+# Create shell aliases for convenience
+alias lg="nviml"            # Short alias
+alias search="nviml"        # Descriptive alias
+```
+
+## Dependencies
+
+- **ripgrep (rg)** - Fast text search engine
+- **fzf** - Command-line fuzzy finder  
+- **bat** - Syntax highlighting for file preview
+- **neovim** - Text editor (system installation)
+
+All dependencies except neovim are automatically bundled with the module.
+
+## Tips & Best Practices
+
+- Use file type filters (`-t`) for faster, more relevant results
+- Set `$EDITOR` environment variable for seamless editor integration
+- Search specific directories rather than entire filesystem for better performance
+- Use regex patterns for complex search requirements
+- Combine with git for repository-aware searching
+
+## Common Use Cases
+
+- **Function Discovery** - Find function definitions across large codebases
+- **Error Investigation** - Search for error messages and stack traces
+- **Code Exploration** - Navigate unfamiliar codebases efficiently
+- **Refactoring Support** - Locate all instances of variables/functions
+- **Documentation Search** - Find comments and documentation strings
+
+## Performance
+
+nviml is optimized for speed and efficiency:
+
+- Leverages ripgrep's high-performance multi-threaded search
+- Automatically excludes `.git/`, `node_modules/`, and minified files
+- Streams results without loading entire files into memory
+- Real-time preview updates as you navigate results
+
+## Contributing
+
+This is part of the [Denix dotfiles framework](https://github.com/connerohnesorge/dotfiles). Contributions welcome!
\ No newline at end of file
diff --git a/modules/programs/nviml/default.nix b/modules/programs/nviml/default.nix
new file mode 100644
index 00000000..d95fe70e
--- /dev/null
+++ b/modules/programs/nviml/default.nix
@@ -0,0 +1,41 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.stdenv.mkDerivation {
+    name = "nviml";
+    src = ./.;
+
+    nativeBuildInputs = with pkgs; [
+      makeWrapper
+      ripgrep
+      fzf
+      bat
+    ];
+
+    installPhase = ''
+      mkdir -p $out/bin
+      cp nviml $out/bin/
+      chmod +x $out/bin/nviml
+
+      wrapProgram $out/bin/nviml \
+        --prefix PATH : ${pkgs.lib.makeBinPath [pkgs.ripgrep pkgs.fzf pkgs.bat]}
+    '';
+  };
+in
+  delib.module {
+    name = "programs.nviml";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/nviml/nviml b/modules/programs/nviml/nviml
new file mode 100755
index 00000000..27509be9
--- /dev/null
+++ b/modules/programs/nviml/nviml
@@ -0,0 +1,181 @@
+#!/usr/bin/env bash
+
+# nviml - Neovim Terminal Live Search
+# A terminal-based live grep tool with preview that opens files in editor
+#
+# Author: Conner Ohnesorge
+# Description: Interactive code search with instant preview and editor integration
+# Dependencies: ripgrep, fzf, bat, neovim (system)
+
+set -euo pipefail
+
+# Script metadata
+readonly SCRIPT_NAME="nviml"
+readonly VERSION="1.0.0"
+
+# Color codes for output
+readonly RED='\033[0;31m'
+readonly GREEN='\033[0;32m'
+readonly YELLOW='\033[1;33m'
+readonly BLUE='\033[0;34m'
+readonly NC='\033[0m' # No Color
+
+# Function to display usage information
+show_usage() {
+    cat << EOF
+${BLUE}${SCRIPT_NAME}${NC} v${VERSION} - Neovim Terminal Live Search
+
+${GREEN}USAGE:${NC}
+    ${SCRIPT_NAME} [DIRECTORY] [RIPGREP_OPTIONS...]
+
+${GREEN}DESCRIPTION:${NC}
+    Interactive live search through codebases with real-time preview without having to open neovim.
+    Uses ripgrep for fast searching, fzf for selection, and opens
+    files in your editor at the exact line.
+
+${GREEN}EXAMPLES:${NC}
+    ${SCRIPT_NAME}                    Search current directory
+    ${SCRIPT_NAME} ~/projects         Search specific directory
+    ${SCRIPT_NAME} -t py              Search only Python files
+    ${SCRIPT_NAME} -g "*.js"          Search only JavaScript files
+    ${SCRIPT_NAME} --type-add 'web:*.{html,css,js}' -t web
+                                     Custom file type search
+
+${GREEN}ENVIRONMENT:${NC}
+    EDITOR                           Editor to open files (default: nvim)
+
+${GREEN}KEYBINDINGS (in fzf):${NC}
+    Enter                            Open file at line in editor
+    Ctrl-C / Esc                     Exit without opening
+    Up/Down                          Navigate results
+    Page Up/Down                     Fast navigation
+
+${GREEN}DEPENDENCIES:${NC}
+    - ripgrep (rg)                   Fast text search
+    - fzf                            Fuzzy finder
+    - bat                            Syntax highlighting for preview
+    - neovim                         Text editor (system installation)
+
+For more ripgrep options, see: rg --help
+EOF
+}
+
+# Function to check if required commands exist
+check_dependencies() {
+    local missing_deps=()
+    
+    for cmd in rg fzf bat; do
+        if ! command -v "$cmd" &> /dev/null; then
+            missing_deps+=("$cmd")
+        fi
+    done
+    
+    if [[ ${#missing_deps[@]} -gt 0 ]]; then
+        echo -e "${RED}Error: Missing required dependencies:${NC}" >&2
+        printf "${RED}  - %s${NC}\n" "${missing_deps[@]}" >&2
+        echo -e "\n${YELLOW}Install via your package manager or enable the nviml module properly.${NC}" >&2
+        return 1
+    fi
+}
+
+# Function to validate search directory
+validate_directory() {
+    local dir="$1"
+    
+    if [[ ! -e "$dir" ]]; then
+        echo -e "${RED}Error: Directory '${dir}' does not exist${NC}" >&2
+        return 1
+    fi
+    
+    if [[ ! -d "$dir" ]]; then
+        echo -e "${RED}Error: '${dir}' is not a directory${NC}" >&2
+        return 1
+    fi
+    
+    if [[ ! -r "$dir" ]]; then
+        echo -e "${RED}Error: Directory '${dir}' is not readable${NC}" >&2
+        return 1
+    fi
+}
+
+main() {
+    if [[ $# -gt 0 ]] && [[ "$1" =~ ^(-h|--help)$ ]]; then
+        show_usage
+        exit 0
+    fi
+    
+    if ! check_dependencies; then
+        exit 1
+    fi
+    
+    local search_dir="${1:-.}"
+    local rg_args=("$@")
+    
+    if [[ $# -gt 0 ]] && [[ -d "$1" ]]; then
+        search_dir="$1"
+        shift
+        rg_args=("$@")
+    fi
+    
+    if ! validate_directory "$search_dir"; then
+        exit 1
+    fi
+    
+    search_dir="$(realpath "$search_dir")"
+    
+    local editor="${EDITOR:-nvim}"
+    
+    if ! command -v "$editor" &> /dev/null; then
+        echo -e "${YELLOW}Warning: Editor '${editor}' not found, falling back to nvim${NC}" >&2
+        editor="nvim"
+        if ! command -v "$editor" &> /dev/null; then
+            echo -e "${RED}Error: No suitable editor found (tried: ${EDITOR:-}, nvim)${NC}" >&2
+            exit 1
+        fi
+    fi
+    
+    echo -e "${BLUE}Searching in:${NC} ${search_dir}"
+    if [[ ${#rg_args[@]} -gt 0 ]]; then
+        echo -e "${BLUE}Ripgrep args:${NC} ${rg_args[*]}"
+    fi
+    echo -e "${BLUE}Editor:${NC} ${editor}"
+    echo -e "${YELLOW}Press Ctrl-C to exit, Enter to open file${NC}"
+    echo
+
+    fzf --ansi \
+        --disabled \
+        --height=100% \
+        --reverse \
+        --border \
+        --color "hl:-1:underline,hl+:-1:underline:reverse" \
+        --color "border:#1e1e2e,header:#f38ba8" \
+        --delimiter : \
+        --header="🔍 Live Search | Enter: Open | Ctrl-C: Exit | Type to search" \
+        --header-first \
+        --info=inline \
+        --prompt="Search❯ " \
+        --pointer="▶" \
+        --marker="✓" \
+        --preview 'bat --color=always --style=numbers,changes --highlight-line {2} {1}' \
+        --preview-window 'right,60%,border-left,+{2}+3/3,~3' \
+        --preview-label="Preview" \
+        --bind 'enter:become('"$editor"' {1} +{2})' \
+        --bind 'ctrl-/:toggle-preview' \
+        --bind 'ctrl-u:preview-page-up' \
+        --bind 'ctrl-d:preview-page-down' \
+        --bind "change:reload:sleep 0.1; rg --line-number --no-heading --color=always --smart-case --hidden --follow --glob='!.git/*' --glob='!node_modules/*' --glob='!*.min.js' --glob='!*.map' ${rg_args[*]} {q} '$search_dir' || true" \
+        --bind 'start:reload:rg --line-number --no-heading --color=always --smart-case --hidden --follow --glob="!.git/*" --glob="!node_modules/*" --glob="!*.min.js" --glob="!*.map" '"${rg_args[*]}"' . '"$search_dir"'' \
+    || {
+        local exit_code=$?
+        if [[ $exit_code -eq 130 ]]; then
+            echo -e "\n${YELLOW}Search cancelled by user${NC}"
+            exit 0
+        else
+            echo -e "\n${RED}Search failed with exit code: $exit_code${NC}" >&2
+            exit $exit_code
+        fi
+    }
+}
+
+# Run main function with all arguments
+main "$@"
diff --git a/modules/programs/pdf2md/.python-version b/modules/programs/pdf2md/.python-version
new file mode 100644
index 00000000..24ee5b1b
--- /dev/null
+++ b/modules/programs/pdf2md/.python-version
@@ -0,0 +1 @@
+3.13
diff --git a/modules/programs/pdf2md/README.md b/modules/programs/pdf2md/README.md
new file mode 100644
index 00000000..e69de29b
diff --git a/modules/programs/pdf2md/main.py b/modules/programs/pdf2md/main.py
new file mode 100644
index 00000000..973e0391
--- /dev/null
+++ b/modules/programs/pdf2md/main.py
@@ -0,0 +1,222 @@
+#!/usr/bin/env python3
+import os
+import uuid
+import sys
+import asyncio
+import io
+import img2pdf
+from PIL import Image
+from desktop_notifier import DesktopNotifier
+from pathlib import Path
+
+PROMPT = "<image>\n<|grounding|>Convert the document to obsidian markdown."
+API_KEY_KEY = "OCR_API_KEY"
+API_ENDPOINT_KEY = "OCR_API_ENDPOINT"
+
+
+def pdf_to_images(
+    pdf_path: str,
+    dpi: int = 144,
+) -> list[Image]:
+    """Convert a PDF to a list of images.
+
+    Args:
+        pdf_path: path to the PDF file
+        dpi: DPI of the output images
+        image_format: format of the output images
+
+    Returns:
+
+    """
+    import fitz
+
+    images = []
+
+    pdf_document = fitz.open(pdf_path)
+
+    zoom = dpi / 72.0
+    matrix = fitz.Matrix(zoom, zoom)
+
+    for page_num in range(pdf_document.page_count):
+        page = pdf_document[page_num]
+        pixmap = page.get_pixmap(matrix=matrix, alpha=False)
+        Image.MAX_IMAGE_PIXELS = None
+        img_data = pixmap.tobytes("png")
+        img = Image.open(io.BytesIO(img_data))
+        images.append(img)
+
+    pdf_document.close()
+    return images
+
+
+def img_to_pdf(pil_images: list[Image], output_path: str):
+    if not pil_images:
+        return
+    image_bytes_list = []
+    for img in pil_images:
+        if img.mode != "RGB":
+            img = img.convert("RGB")
+        img_buffer = io.BytesIO()
+        img.save(img_buffer, format="JPEG", quality=95)
+        img_bytes = img_buffer.getvalue()
+        image_bytes_list.append(img_bytes)
+    try:
+        pdf_bytes = img2pdf.convert(image_bytes_list)
+        if pdf_bytes is None:
+            raise Exception("Failed to convert images to PDF")
+        with open(output_path, "wb") as f:
+            f.write(pdf_bytes)
+    except Exception as e:
+        print(f"error: {e}")
+
+
+async def send_notification(
+    file_path: str,
+) -> None:
+    """Send a notification with the given file path.
+
+    Args:
+        file_path: path to the file to send
+    """
+    notifier = DesktopNotifier()
+
+    await notifier.send(
+        title=f"pdf2md converted {file_path}",
+        message="result saved to ~/Downloads/test.pdf",
+    )
+
+
+def get_env(key: str) -> str:
+    """Get the value of an environment variable.
+
+    Args:
+        key: name of the environment variable
+
+    Returns:
+        value of the environment variable
+    """
+    try:
+        result = next(
+            line.split("=", 1)[1].strip()
+            for line in open(os.path.expanduser("~/dotfiles/.env"))
+            if line.startswith(f"{key}=")
+        )
+    except StopIteration:
+        raise ValueError(f"Environment variable {key} not found")
+    except Exception as e:
+        raise ValueError(f"Error reading environment variable {key}: {e}")
+    return result
+
+
+async def img_to_md(
+    img: Image,
+) -> str:
+    """Convert an image to Markdown using OpenAI's API.
+
+    Args:
+        img: the image to convert
+        prompt: the prompt to use for the conversion
+        api_key: the API key for OpenAI
+        model: the model to use for the conversion
+
+    Returns:
+        the converted Markdown
+    """
+
+    import base64
+    from openai import OpenAI
+
+    client = OpenAI(
+        api_key=get_env(API_KEY_KEY), base_url=get_env(API_ENDPOINT_KEY), timeout=3600
+    )
+
+    image_name = str(uuid.uuid4()) + ".png"
+    img.save(image_name, format="PNG")
+    image_data = open(image_name, "rb").read()
+
+    base64_string = base64.b64encode(image_data).decode("utf-8")
+    image_data_url = f"data:image/png;base64,{base64_string}"
+
+    messages = [
+        {
+            "role": "user",
+            "content": [
+                {"type": "image_url", "image_url": {"url": image_data_url}},
+                {"type": "text", "text": PROMPT},
+            ],
+        }
+    ]
+
+    response = client.chat.completions.create(
+        model="deepseek-ai/DeepSeek-OCR",
+        messages=messages,
+        max_tokens=2048,
+        temperature=0.0,
+        extra_body={
+            "skip_special_tokens": False,
+            "vllm_xargs": {  # args used to control custom logits processor
+                "ngram_size": 40,
+                "window_size": 90,
+                "whitelist_token_ids": [128821, 128822],  # whitelist: <td>, </td>
+            },
+        },
+    )
+
+    return response.choices[0].message.content
+
+
+def re_match(text):
+    pattern = r"(<\|ref\|>(.*?)<\|/ref\|><\|det\|>(.*?)<\|/det\|>)"
+    matches = re.findall(pattern, text, re.DOTALL)
+
+    mathes_image = []
+    mathes_other = []
+    for a_match in matches:
+        if "<|ref|>image<|/ref|>" in a_match[0]:
+            mathes_image.append(a_match[0])
+        else:
+            mathes_other.append(a_match[0])
+    return matches, mathes_image, mathes_other
+
+
+def extract_coordinates_and_label(ref_text: str, image_width: int, image_height: int):
+    try:
+        label_type = ref_text[1]
+        cor_list = eval(ref_text[2])
+    except Exception as e:
+        print(e)
+        return None
+
+    return (label_type, cor_list)
+
+
+async def main():
+    if len(sys.argv) < 2:
+        print("Usage: pdf2md <file_path>")
+        return
+    file_path = Path(sys.argv[1])
+    if not file_path.is_file():
+        raise ValueError(f"File {file_path} does not exist")
+    print("Converting PDF to images...")
+    images = pdf_to_images(file_path)
+    print("Converting images to Markdown...")
+    markdown: list[str] = []
+    for image in images:
+        content = await img_to_md(image)
+        matches, mathes_image, mathes_other = re_match(content)
+
+        markdown.append(content)
+
+    final_markdown = ""
+    for i, md in enumerate(markdown):
+        # print(f"Image {i+1}:")
+        # print(md)
+        final_markdown += f"\n<!-- Page {i+1} --->\n"
+        final_markdown += md
+        final_markdown += "\n\n"
+
+    await send_notification(file_path.with_suffix(".md"))
+
+
+if __name__ == "__main__":
+    asyncio.run(main())
diff --git a/modules/programs/pdf2md/module.nix b/modules/programs/pdf2md/module.nix
new file mode 100644
index 00000000..38dd4410
--- /dev/null
+++ b/modules/programs/pdf2md/module.nix
@@ -0,0 +1,33 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program =
+    pkgs.writers.writePython3Bin "pdf2md" {
+      flakeIgnore = ["W291" "W503" "E226" "E501" "W293" "E265"];
+      libraries = with pkgs.python3Packages; [
+        desktop-notifier
+        img2pdf
+        openai
+        pillow
+        pymupdf
+      ];
+    }
+    ./main.py;
+in
+  delib.module {
+    name = "programs.pdf2md";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/pdf2md/pyproject.toml b/modules/programs/pdf2md/pyproject.toml
new file mode 100644
index 00000000..ebf65439
--- /dev/null
+++ b/modules/programs/pdf2md/pyproject.toml
@@ -0,0 +1,14 @@
+[project]
+name = "pdf2md"
+version = "0.1.0"
+description = "Add your description here"
+readme = "README.md"
+requires-python = ">=3.13"
+dependencies = [
+    "desktop-notifier>=6.2.0",
+    "image2pdf>=1.0.0",
+    "img2pdf>=0.6.3",
+    "openai>=2.7.1",
+    "pillow>=12.0.0",
+    "pymupdf>=1.26.6",
+]
diff --git a/modules/programs/pdf2md/uv.lock b/modules/programs/pdf2md/uv.lock
new file mode 100644
index 00000000..c0659243
--- /dev/null
+++ b/modules/programs/pdf2md/uv.lock
@@ -0,0 +1,725 @@
+version = 1
+revision = 3
+requires-python = ">=3.13"
+
+[[package]]
+name = "annotated-types"
+version = "0.7.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/ee/67/531ea369ba64dcff5ec9c3402f9f51bf748cec26dde048a2f973a4eea7f5/annotated_types-0.7.0.tar.gz", hash = "sha256:aff07c09a53a08bc8cfccb9c85b05f1aa9a2a6f23728d790723543408344ce89", size = 16081, upload-time = "2024-05-20T21:33:25.928Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/78/b6/6307fbef88d9b5ee7421e68d78a9f162e0da4900bc5f5793f6d3d0e34fb8/annotated_types-0.7.0-py3-none-any.whl", hash = "sha256:1f02e8b43a8fbbc3f3e0d4f0f4bfc8131bcb4eebe8849b8e5c773f3a1c582a53", size = 13643, upload-time = "2024-05-20T21:33:24.1Z" },
+]
+
+[[package]]
+name = "anyio"
+version = "4.11.0"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "idna" },
+    { name = "sniffio" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/c6/78/7d432127c41b50bccba979505f272c16cbcadcc33645d5fa3a738110ae75/anyio-4.11.0.tar.gz", hash = "sha256:82a8d0b81e318cc5ce71a5f1f8b5c4e63619620b63141ef8c995fa0db95a57c4", size = 219094, upload-time = "2025-09-23T09:19:12.58Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/15/b3/9b1a8074496371342ec1e796a96f99c82c945a339cd81a8e73de28b4cf9e/anyio-4.11.0-py3-none-any.whl", hash = "sha256:0287e96f4d26d4149305414d4e3bc32f0dcd0862365a4bddea19d7a1ec38c4fc", size = 109097, upload-time = "2025-09-23T09:19:10.601Z" },
+]
+
+[[package]]
+name = "bidict"
+version = "0.23.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/9a/6e/026678aa5a830e07cd9498a05d3e7e650a4f56a42f267a53d22bcda1bdc9/bidict-0.23.1.tar.gz", hash = "sha256:03069d763bc387bbd20e7d49914e75fc4132a41937fa3405417e1a5a2d006d71", size = 29093, upload-time = "2024-02-18T19:09:05.748Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/99/37/e8730c3587a65eb5645d4aba2d27aae48e8003614d6aaf15dda67f702f1f/bidict-0.23.1-py3-none-any.whl", hash = "sha256:5dae8d4d79b552a71cbabc7deb25dfe8ce710b17ff41711e13010ead2abfc3e5", size = 32764, upload-time = "2024-02-18T19:09:04.156Z" },
+]
+
+[[package]]
+name = "certifi"
+version = "2025.10.5"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/4c/5b/b6ce21586237c77ce67d01dc5507039d444b630dd76611bbca2d8e5dcd91/certifi-2025.10.5.tar.gz", hash = "sha256:47c09d31ccf2acf0be3f701ea53595ee7e0b8fa08801c6624be771df09ae7b43", size = 164519, upload-time = "2025-10-05T04:12:15.808Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/e4/37/af0d2ef3967ac0d6113837b44a4f0bfe1328c2b9763bd5b1744520e5cfed/certifi-2025.10.5-py3-none-any.whl", hash = "sha256:0f212c2744a9bb6de0c56639a6f68afe01ecd92d91f14ae897c4fe7bbeeef0de", size = 163286, upload-time = "2025-10-05T04:12:14.03Z" },
+]
+
+[[package]]
+name = "colorama"
+version = "0.4.6"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/d8/53/6f443c9a4a8358a93a6792e2acffb9d9d5cb0a5cfd8802644b7b1c9a02e4/colorama-0.4.6.tar.gz", hash = "sha256:08695f5cb7ed6e0531a20572697297273c47b8cae5a63ffc6d6ed5c201be6e44", size = 27697, upload-time = "2022-10-25T02:36:22.414Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/d1/d6/3965ed04c63042e047cb6a3e6ed1a63a35087b6a609aa3a15ed8ac56c221/colorama-0.4.6-py2.py3-none-any.whl", hash = "sha256:4f1d9991f5acc0ca119f9d443620b77f9d6b33703e51011c16baf57afb285fc6", size = 25335, upload-time = "2022-10-25T02:36:20.889Z" },
+]
+
+[[package]]
+name = "dbus-fast"
+version = "2.45.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/90/de/c1939d9ecf82c5501310585f7672d26e0edda872c0875fe2e09d5be2c895/dbus_fast-2.45.0.tar.gz", hash = "sha256:a40338c0a2d9360c84955b84edee782e0a7afeba3b13e2f859dc352ccad49c74", size = 72471, upload-time = "2025-11-08T16:53:22.199Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/ed/01/1e422f58934499ab8035a9198be45f95d542aa28d07453b3a60fc39239f7/dbus_fast-2.45.0-cp313-cp313-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:39f991c1aa66c58e8c366215ada5103d76f0569c27059088b8394530e575248a", size = 766270, upload-time = "2025-11-08T17:01:54.089Z" },
+    { url = "https://files.pythonhosted.org/packages/86/1f/08feed8d36601c5714fb41514885ad216857ccd6dab296267ffe53b02d9c/dbus_fast-2.45.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:048594f8152e2abb40f04ae4c0fe0672f68de7d4aa6d7bcb38625e2bc1858411", size = 815354, upload-time = "2025-11-08T17:01:55.482Z" },
+    { url = "https://files.pythonhosted.org/packages/ea/cf/1966f00a880eec5928523b6b7ea4f4ad8c5e7537a9ef6ea7e9d3c1d2dfb8/dbus_fast-2.45.0-cp313-cp313-manylinux_2_36_x86_64.whl", hash = "sha256:e9260db6f289d942552729591d4344ae185eee178b0b7c421ec51d2ce8bfe3ff", size = 786891, upload-time = "2025-11-08T16:53:20.363Z" },
+    { url = "https://files.pythonhosted.org/packages/02/9d/48a223958017e234beb0d44da14feb493c13516f5a40f7672ed74970e435/dbus_fast-2.45.0-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:1ec00edf1ae79650cdfcce1e63b7f331bade6b6391030df5f59f709eed16e1f6", size = 772505, upload-time = "2025-11-08T17:01:57.01Z" },
+    { url = "https://files.pythonhosted.org/packages/8a/0f/7bb9eb42c3e56e013e632d13ee155fb9d570219b685f36824811d69874ae/dbus_fast-2.45.0-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:d1d016347a74df9bec5f74adcea46c4bdf40953e351d07e0789c0ec3da9bd932", size = 823870, upload-time = "2025-11-08T17:01:58.745Z" },
+    { url = "https://files.pythonhosted.org/packages/d6/4c/d63797c6b50c9ca7172808b7a48928dff1748789ad00e566cbb987cfa4ab/dbus_fast-2.45.0-cp314-cp314-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:3d69851cd90a954e1d4d3312a06cf05f8ed2d620de0a49c9a563d01eed126b33", size = 779973, upload-time = "2025-11-08T17:02:01.97Z" },
+    { url = "https://files.pythonhosted.org/packages/00/46/2a39ed93476ab108dc182c797ea3fe101cbc8ff01182a6d36eb7dd1f3479/dbus_fast-2.45.0-cp314-cp314-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:0d78c678211883b21fa7c842f683fa17657fbdd723acccd38b657454296d7db3", size = 821324, upload-time = "2025-11-08T17:02:03.75Z" },
+    { url = "https://files.pythonhosted.org/packages/44/10/90c4c7637a0419f4fb9cf9f29080783296b771f0927f049b2619ca73c4ea/dbus_fast-2.45.0-cp314-cp314-musllinux_1_2_aarch64.whl", hash = "sha256:b4f77c598e19e0a7ea5867a5e0aab5a9ef323d24b57e1965a368ce09a2c913f0", size = 786880, upload-time = "2025-11-08T17:02:05.825Z" },
+    { url = "https://files.pythonhosted.org/packages/57/0a/2d284d222d9f3ef129e216bb1a392d8d5632f0fb7fadb22dfec84ddddf48/dbus_fast-2.45.0-cp314-cp314-musllinux_1_2_x86_64.whl", hash = "sha256:4ec7349891288abef6fba862cf0d75ee74f28e1252ffb407073f788c29f57e62", size = 828103, upload-time = "2025-11-08T17:02:07.269Z" },
+    { url = "https://files.pythonhosted.org/packages/b5/31/8b580201bb6c7eeaf3e7bb9dd4764a99d971cc018d71eed3e84f966391f1/dbus_fast-2.45.0-cp314-cp314t-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:781ad52045a5ec31db1bda5a7091cd401655612b65d5fe9d96820e1c4f22f723", size = 1483286, upload-time = "2025-11-08T17:02:10.991Z" },
+    { url = "https://files.pythonhosted.org/packages/fe/6f/f1dbc51634c6a99932ba324412c298d2ccae015cc39b8f8ecf794fad8284/dbus_fast-2.45.0-cp314-cp314t-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:b7f957d4bf38fe29a874c7a9ec32825c4f084531eaa65f2cd60dad0c47f27cb2", size = 1557037, upload-time = "2025-11-08T17:02:12.491Z" },
+    { url = "https://files.pythonhosted.org/packages/31/78/687404accbff9064c4973681193da01ac5073bfbcb1826d1d6acfa66b189/dbus_fast-2.45.0-cp314-cp314t-musllinux_1_2_aarch64.whl", hash = "sha256:e079c7b2a52c016b5a36d3910f27997acd78a15fa78bfc131b3da97cb0d06cb4", size = 1497289, upload-time = "2025-11-08T17:02:14.06Z" },
+    { url = "https://files.pythonhosted.org/packages/d5/fc/eaa7f4e39c21c772085d5b2a867cabe74c92cc23ffd0450835385eceba37/dbus_fast-2.45.0-cp314-cp314t-musllinux_1_2_x86_64.whl", hash = "sha256:b8b63139883267ae9e63dc89aeaf26ba02198dac723d4ab10f909dee5ec850ab", size = 1572943, upload-time = "2025-11-08T17:02:15.528Z" },
+]
+
+[[package]]
+name = "deprecated"
+version = "1.3.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "wrapt" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/49/85/12f0a49a7c4ffb70572b6c2ef13c90c88fd190debda93b23f026b25f9634/deprecated-1.3.1.tar.gz", hash = "sha256:b1b50e0ff0c1fddaa5708a2c6b0a6588bb09b892825ab2b214ac9ea9d92a5223", size = 2932523, upload-time = "2025-10-30T08:19:02.757Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/84/d0/205d54408c08b13550c733c4b85429e7ead111c7f0014309637425520a9a/deprecated-1.3.1-py2.py3-none-any.whl", hash = "sha256:597bfef186b6f60181535a29fbe44865ce137a5079f295b479886c82729d5f3f", size = 11298, upload-time = "2025-10-30T08:19:00.758Z" },
+]
+
+[[package]]
+name = "desktop-notifier"
+version = "6.2.0"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "bidict" },
+    { name = "dbus-fast", marker = "sys_platform == 'linux'" },
+    { name = "packaging" },
+    { name = "rubicon-objc", marker = "sys_platform == 'darwin'" },
+    { name = "typing-extensions" },
+    { name = "winrt-runtime", marker = "sys_platform == 'win32'" },
+    { name = "winrt-windows-applicationmodel-core", marker = "sys_platform == 'win32'" },
+    { name = "winrt-windows-data-xml-dom", marker = "sys_platform == 'win32'" },
+    { name = "winrt-windows-foundation", marker = "sys_platform == 'win32'" },
+    { name = "winrt-windows-foundation-collections", marker = "sys_platform == 'win32'" },
+    { name = "winrt-windows-ui-notifications", marker = "sys_platform == 'win32'" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/41/df/67c6ff92d870881b5a6e073773a209eeb2e263a15cd112ddddff5c14abe8/desktop_notifier-6.2.0.tar.gz", hash = "sha256:528167b691ce40031fa92f67c9f452b7be29846613e19d11ec0c49cb5242d338", size = 34487, upload-time = "2025-08-08T18:14:50.801Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/91/36/b32a806dbb7bce308fecc977220c03ca7990831491bebc582b02619ff980/desktop_notifier-6.2.0-py3-none-any.whl", hash = "sha256:193b0885e694a99ae22f72234c91afbac633074295b44183bf9716dd4077b8f3", size = 34406, upload-time = "2025-08-08T18:14:49.497Z" },
+]
+
+[[package]]
+name = "distro"
+version = "1.9.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/fc/f8/98eea607f65de6527f8a2e8885fc8015d3e6f5775df186e443e0964a11c3/distro-1.9.0.tar.gz", hash = "sha256:2fa77c6fd8940f116ee1d6b94a2f90b13b5ea8d019b98bc8bafdcabcdd9bdbed", size = 60722, upload-time = "2023-12-24T09:54:32.31Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/12/b3/231ffd4ab1fc9d679809f356cebee130ac7daa00d6d6f3206dd4fd137e9e/distro-1.9.0-py3-none-any.whl", hash = "sha256:7bffd925d65168f85027d8da9af6bddab658135b840670a223589bc0c8ef02b2", size = 20277, upload-time = "2023-12-24T09:54:30.421Z" },
+]
+
+[[package]]
+name = "h11"
+version = "0.16.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/01/ee/02a2c011bdab74c6fb3c75474d40b3052059d95df7e73351460c8588d963/h11-0.16.0.tar.gz", hash = "sha256:4e35b956cf45792e4caa5885e69fba00bdbc6ffafbfa020300e549b208ee5ff1", size = 101250, upload-time = "2025-04-24T03:35:25.427Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/04/4b/29cac41a4d98d144bf5f6d33995617b185d14b22401f75ca86f384e87ff1/h11-0.16.0-py3-none-any.whl", hash = "sha256:63cf8bbe7522de3bf65932fda1d9c2772064ffb3dae62d55932da54b31cb6c86", size = 37515, upload-time = "2025-04-24T03:35:24.344Z" },
+]
+
+[[package]]
+name = "httpcore"
+version = "1.0.9"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "certifi" },
+    { name = "h11" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/06/94/82699a10bca87a5556c9c59b5963f2d039dbd239f25bc2a63907a05a14cb/httpcore-1.0.9.tar.gz", hash = "sha256:6e34463af53fd2ab5d807f399a9b45ea31c3dfa2276f15a2c3f00afff6e176e8", size = 85484, upload-time = "2025-04-24T22:06:22.219Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/7e/f5/f66802a942d491edb555dd61e3a9961140fd64c90bce1eafd741609d334d/httpcore-1.0.9-py3-none-any.whl", hash = "sha256:2d400746a40668fc9dec9810239072b40b4484b640a8c38fd654a024c7a1bf55", size = 78784, upload-time = "2025-04-24T22:06:20.566Z" },
+]
+
+[[package]]
+name = "httpx"
+version = "0.28.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "anyio" },
+    { name = "certifi" },
+    { name = "httpcore" },
+    { name = "idna" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/b1/df/48c586a5fe32a0f01324ee087459e112ebb7224f646c0b5023f5e79e9956/httpx-0.28.1.tar.gz", hash = "sha256:75e98c5f16b0f35b567856f597f06ff2270a374470a5c2392242528e3e3e42fc", size = 141406, upload-time = "2024-12-06T15:37:23.222Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/2a/39/e50c7c3a983047577ee07d2a9e53faf5a69493943ec3f6a384bdc792deb2/httpx-0.28.1-py3-none-any.whl", hash = "sha256:d909fcccc110f8c7faf814ca82a9a4d816bc5a6dbfea25d6591d6985b8ba59ad", size = 73517, upload-time = "2024-12-06T15:37:21.509Z" },
+]
+
+[[package]]
+name = "idna"
+version = "3.11"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/6f/6d/0703ccc57f3a7233505399edb88de3cbd678da106337b9fcde432b65ed60/idna-3.11.tar.gz", hash = "sha256:795dafcc9c04ed0c1fb032c2aa73654d8e8c5023a7df64a53f39190ada629902", size = 194582, upload-time = "2025-10-12T14:55:20.501Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/0e/61/66938bbb5fc52dbdf84594873d5b51fb1f7c7794e9c0f5bd885f30bc507b/idna-3.11-py3-none-any.whl", hash = "sha256:771a87f49d9defaf64091e6e6fe9c18d4833f140bd19464795bc32d966ca37ea", size = 71008, upload-time = "2025-10-12T14:55:18.883Z" },
+]
+
+[[package]]
+name = "image2pdf"
+version = "1.0.0"
+source = { registry = "https://pypi.org/simple" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/1a/ff/08f7b8b8d0ca8c0f295877f7094d30fc0cc7453b58e08acb082eaebdf20b/image2pdf-1.0.0-py3-none-any.whl", hash = "sha256:b3d16f07f4180912bdd092b076b02a67394f93820ab9b3a241c747c122bf2c65", size = 5034, upload-time = "2022-03-08T14:26:42.284Z" },
+]
+
+[[package]]
+name = "img2pdf"
+version = "0.6.3"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "pikepdf" },
+    { name = "pillow" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/8e/97/ca44c467131b93fda82d2a2f21b738c8bcf63b5259e3b8250e928b8dd52a/img2pdf-0.6.3.tar.gz", hash = "sha256:219518020f5bd242bdc46493941ea3f756f664c2e86f2454721e74353f58cd95", size = 120350, upload-time = "2025-11-05T20:51:57.558Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/4d/dc/91e3a4a11c25ae183bd5a71b84ecb298db76405ff70013f76b10877bdfe3/img2pdf-0.6.3-py3-none-any.whl", hash = "sha256:44d12d235752edd17c43c04ff39952cdc5dd4c6aba90569c4902bd445085266b", size = 49701, upload-time = "2025-11-05T20:51:55.469Z" },
+]
+
+[[package]]
+name = "jiter"
+version = "0.11.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/a3/68/0357982493a7b20925aece061f7fb7a2678e3b232f8d73a6edb7e5304443/jiter-0.11.1.tar.gz", hash = "sha256:849dcfc76481c0ea0099391235b7ca97d7279e0fa4c86005457ac7c88e8b76dc", size = 168385, upload-time = "2025-10-17T11:31:15.186Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/7c/4b/e4dd3c76424fad02a601d570f4f2a8438daea47ba081201a721a903d3f4c/jiter-0.11.1-cp313-cp313-macosx_10_12_x86_64.whl", hash = "sha256:71b6a920a5550f057d49d0e8bcc60945a8da998019e83f01adf110e226267663", size = 305272, upload-time = "2025-10-17T11:29:39.249Z" },
+    { url = "https://files.pythonhosted.org/packages/67/83/2cd3ad5364191130f4de80eacc907f693723beaab11a46c7d155b07a092c/jiter-0.11.1-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:0b3de72e925388453a5171be83379549300db01284f04d2a6f244d1d8de36f94", size = 314038, upload-time = "2025-10-17T11:29:40.563Z" },
+    { url = "https://files.pythonhosted.org/packages/d3/3c/8e67d9ba524e97d2f04c8f406f8769a23205026b13b0938d16646d6e2d3e/jiter-0.11.1-cp313-cp313-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:cc19dd65a2bd3d9c044c5b4ebf657ca1e6003a97c0fc10f555aa4f7fb9821c00", size = 345977, upload-time = "2025-10-17T11:29:42.009Z" },
+    { url = "https://files.pythonhosted.org/packages/8d/a5/489ce64d992c29bccbffabb13961bbb0435e890d7f2d266d1f3df5e917d2/jiter-0.11.1-cp313-cp313-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:d58faaa936743cd1464540562f60b7ce4fd927e695e8bc31b3da5b914baa9abd", size = 364503, upload-time = "2025-10-17T11:29:43.459Z" },
+    { url = "https://files.pythonhosted.org/packages/d4/c0/e321dd83ee231d05c8fe4b1a12caf1f0e8c7a949bf4724d58397104f10f2/jiter-0.11.1-cp313-cp313-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:902640c3103625317291cb73773413b4d71847cdf9383ba65528745ff89f1d14", size = 487092, upload-time = "2025-10-17T11:29:44.835Z" },
+    { url = "https://files.pythonhosted.org/packages/f9/5e/8f24ec49c8d37bd37f34ec0112e0b1a3b4b5a7b456c8efff1df5e189ad43/jiter-0.11.1-cp313-cp313-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:30405f726e4c2ed487b176c09f8b877a957f535d60c1bf194abb8dadedb5836f", size = 376328, upload-time = "2025-10-17T11:29:46.175Z" },
+    { url = "https://files.pythonhosted.org/packages/7f/70/ded107620e809327cf7050727e17ccfa79d6385a771b7fe38fb31318ef00/jiter-0.11.1-cp313-cp313-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:3217f61728b0baadd2551844870f65219ac4a1285d5e1a4abddff3d51fdabe96", size = 356632, upload-time = "2025-10-17T11:29:47.454Z" },
+    { url = "https://files.pythonhosted.org/packages/19/53/c26f7251613f6a9079275ee43c89b8a973a95ff27532c421abc2a87afb04/jiter-0.11.1-cp313-cp313-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:b1364cc90c03a8196f35f396f84029f12abe925415049204446db86598c8b72c", size = 384358, upload-time = "2025-10-17T11:29:49.377Z" },
+    { url = "https://files.pythonhosted.org/packages/84/16/e0f2cc61e9c4d0b62f6c1bd9b9781d878a427656f88293e2a5335fa8ff07/jiter-0.11.1-cp313-cp313-musllinux_1_1_aarch64.whl", hash = "sha256:53a54bf8e873820ab186b2dca9f6c3303f00d65ae5e7b7d6bda1b95aa472d646", size = 517279, upload-time = "2025-10-17T11:29:50.968Z" },
+    { url = "https://files.pythonhosted.org/packages/60/5c/4cd095eaee68961bca3081acbe7c89e12ae24a5dae5fd5d2a13e01ed2542/jiter-0.11.1-cp313-cp313-musllinux_1_1_x86_64.whl", hash = "sha256:7e29aca023627b0e0c2392d4248f6414d566ff3974fa08ff2ac8dbb96dfee92a", size = 508276, upload-time = "2025-10-17T11:29:52.619Z" },
+    { url = "https://files.pythonhosted.org/packages/4f/25/f459240e69b0e09a7706d96ce203ad615ca36b0fe832308d2b7123abf2d0/jiter-0.11.1-cp313-cp313-win32.whl", hash = "sha256:f153e31d8bca11363751e875c0a70b3d25160ecbaee7b51e457f14498fb39d8b", size = 205593, upload-time = "2025-10-17T11:29:53.938Z" },
+    { url = "https://files.pythonhosted.org/packages/7c/16/461bafe22bae79bab74e217a09c907481a46d520c36b7b9fe71ee8c9e983/jiter-0.11.1-cp313-cp313-win_amd64.whl", hash = "sha256:f773f84080b667c69c4ea0403fc67bb08b07e2b7ce1ef335dea5868451e60fed", size = 203518, upload-time = "2025-10-17T11:29:55.216Z" },
+    { url = "https://files.pythonhosted.org/packages/7b/72/c45de6e320edb4fa165b7b1a414193b3cae302dd82da2169d315dcc78b44/jiter-0.11.1-cp313-cp313-win_arm64.whl", hash = "sha256:635ecd45c04e4c340d2187bcb1cea204c7cc9d32c1364d251564bf42e0e39c2d", size = 188062, upload-time = "2025-10-17T11:29:56.631Z" },
+    { url = "https://files.pythonhosted.org/packages/65/9b/4a57922437ca8753ef823f434c2dec5028b237d84fa320f06a3ba1aec6e8/jiter-0.11.1-cp313-cp313t-macosx_11_0_arm64.whl", hash = "sha256:d892b184da4d94d94ddb4031296931c74ec8b325513a541ebfd6dfb9ae89904b", size = 313814, upload-time = "2025-10-17T11:29:58.509Z" },
+    { url = "https://files.pythonhosted.org/packages/76/50/62a0683dadca25490a4bedc6a88d59de9af2a3406dd5a576009a73a1d392/jiter-0.11.1-cp313-cp313t-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:aa22c223a3041dacb2fcd37c70dfd648b44662b4a48e242592f95bda5ab09d58", size = 344987, upload-time = "2025-10-17T11:30:00.208Z" },
+    { url = "https://files.pythonhosted.org/packages/da/00/2355dbfcbf6cdeaddfdca18287f0f38ae49446bb6378e4a5971e9356fc8a/jiter-0.11.1-cp313-cp313t-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:330e8e6a11ad4980cd66a0f4a3e0e2e0f646c911ce047014f984841924729789", size = 356399, upload-time = "2025-10-17T11:30:02.084Z" },
+    { url = "https://files.pythonhosted.org/packages/c9/07/c2bd748d578fa933d894a55bff33f983bc27f75fc4e491b354bef7b78012/jiter-0.11.1-cp313-cp313t-win_amd64.whl", hash = "sha256:09e2e386ebf298547ca3a3704b729471f7ec666c2906c5c26c1a915ea24741ec", size = 203289, upload-time = "2025-10-17T11:30:03.656Z" },
+    { url = "https://files.pythonhosted.org/packages/e6/ee/ace64a853a1acbd318eb0ca167bad1cf5ee037207504b83a868a5849747b/jiter-0.11.1-cp313-cp313t-win_arm64.whl", hash = "sha256:fe4a431c291157e11cee7c34627990ea75e8d153894365a3bc84b7a959d23ca8", size = 188284, upload-time = "2025-10-17T11:30:05.046Z" },
+    { url = "https://files.pythonhosted.org/packages/8d/00/d6006d069e7b076e4c66af90656b63da9481954f290d5eca8c715f4bf125/jiter-0.11.1-cp314-cp314-macosx_10_12_x86_64.whl", hash = "sha256:0fa1f70da7a8a9713ff8e5f75ec3f90c0c870be6d526aa95e7c906f6a1c8c676", size = 304624, upload-time = "2025-10-17T11:30:06.678Z" },
+    { url = "https://files.pythonhosted.org/packages/fc/45/4a0e31eb996b9ccfddbae4d3017b46f358a599ccf2e19fbffa5e531bd304/jiter-0.11.1-cp314-cp314-macosx_11_0_arm64.whl", hash = "sha256:569ee559e5046a42feb6828c55307cf20fe43308e3ae0d8e9e4f8d8634d99944", size = 315042, upload-time = "2025-10-17T11:30:08.87Z" },
+    { url = "https://files.pythonhosted.org/packages/e7/91/22f5746f5159a28c76acdc0778801f3c1181799aab196dbea2d29e064968/jiter-0.11.1-cp314-cp314-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:f69955fa1d92e81987f092b233f0be49d4c937da107b7f7dcf56306f1d3fcce9", size = 346357, upload-time = "2025-10-17T11:30:10.222Z" },
+    { url = "https://files.pythonhosted.org/packages/f5/4f/57620857d4e1dc75c8ff4856c90cb6c135e61bff9b4ebfb5dc86814e82d7/jiter-0.11.1-cp314-cp314-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:090f4c9d4a825e0fcbd0a2647c9a88a0f366b75654d982d95a9590745ff0c48d", size = 365057, upload-time = "2025-10-17T11:30:11.585Z" },
+    { url = "https://files.pythonhosted.org/packages/ce/34/caf7f9cc8ae0a5bb25a5440cc76c7452d264d1b36701b90fdadd28fe08ec/jiter-0.11.1-cp314-cp314-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:bbf3d8cedf9e9d825233e0dcac28ff15c47b7c5512fdfe2e25fd5bbb6e6b0cee", size = 487086, upload-time = "2025-10-17T11:30:13.052Z" },
+    { url = "https://files.pythonhosted.org/packages/50/17/85b5857c329d533d433fedf98804ebec696004a1f88cabad202b2ddc55cf/jiter-0.11.1-cp314-cp314-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:2aa9b1958f9c30d3d1a558b75f0626733c60eb9b7774a86b34d88060be1e67fe", size = 376083, upload-time = "2025-10-17T11:30:14.416Z" },
+    { url = "https://files.pythonhosted.org/packages/85/d3/2d9f973f828226e6faebdef034097a2918077ea776fb4d88489949024787/jiter-0.11.1-cp314-cp314-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:e42d1ca16590b768c5e7d723055acd2633908baacb3628dd430842e2e035aa90", size = 357825, upload-time = "2025-10-17T11:30:15.765Z" },
+    { url = "https://files.pythonhosted.org/packages/f4/55/848d4dabf2c2c236a05468c315c2cb9dc736c5915e65449ccecdba22fb6f/jiter-0.11.1-cp314-cp314-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:5db4c2486a023820b701a17aec9c5a6173c5ba4393f26662f032f2de9c848b0f", size = 383933, upload-time = "2025-10-17T11:30:17.34Z" },
+    { url = "https://files.pythonhosted.org/packages/0b/6c/204c95a4fbb0e26dfa7776c8ef4a878d0c0b215868011cc904bf44f707e2/jiter-0.11.1-cp314-cp314-musllinux_1_1_aarch64.whl", hash = "sha256:4573b78777ccfac954859a6eff45cbd9d281d80c8af049d0f1a3d9fc323d5c3a", size = 517118, upload-time = "2025-10-17T11:30:18.684Z" },
+    { url = "https://files.pythonhosted.org/packages/88/25/09956644ea5a2b1e7a2a0f665cb69a973b28f4621fa61fc0c0f06ff40a31/jiter-0.11.1-cp314-cp314-musllinux_1_1_x86_64.whl", hash = "sha256:7593ac6f40831d7961cb67633c39b9fef6689a211d7919e958f45710504f52d3", size = 508194, upload-time = "2025-10-17T11:30:20.719Z" },
+    { url = "https://files.pythonhosted.org/packages/09/49/4d1657355d7f5c9e783083a03a3f07d5858efa6916a7d9634d07db1c23bd/jiter-0.11.1-cp314-cp314-win32.whl", hash = "sha256:87202ec6ff9626ff5f9351507def98fcf0df60e9a146308e8ab221432228f4ea", size = 203961, upload-time = "2025-10-17T11:30:22.073Z" },
+    { url = "https://files.pythonhosted.org/packages/76/bd/f063bd5cc2712e7ca3cf6beda50894418fc0cfeb3f6ff45a12d87af25996/jiter-0.11.1-cp314-cp314-win_amd64.whl", hash = "sha256:a5dd268f6531a182c89d0dd9a3f8848e86e92dfff4201b77a18e6b98aa59798c", size = 202804, upload-time = "2025-10-17T11:30:23.452Z" },
+    { url = "https://files.pythonhosted.org/packages/52/ca/4d84193dfafef1020bf0bedd5e1a8d0e89cb67c54b8519040effc694964b/jiter-0.11.1-cp314-cp314-win_arm64.whl", hash = "sha256:5d761f863f912a44748a21b5c4979c04252588ded8d1d2760976d2e42cd8d991", size = 188001, upload-time = "2025-10-17T11:30:24.915Z" },
+    { url = "https://files.pythonhosted.org/packages/d5/fa/3b05e5c9d32efc770a8510eeb0b071c42ae93a5b576fd91cee9af91689a1/jiter-0.11.1-cp314-cp314t-macosx_11_0_arm64.whl", hash = "sha256:2cc5a3965285ddc33e0cab933e96b640bc9ba5940cea27ebbbf6695e72d6511c", size = 312561, upload-time = "2025-10-17T11:30:26.742Z" },
+    { url = "https://files.pythonhosted.org/packages/50/d3/335822eb216154ddb79a130cbdce88fdf5c3e2b43dc5dba1fd95c485aaf5/jiter-0.11.1-cp314-cp314t-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:6b572b3636a784c2768b2342f36a23078c8d3aa6d8a30745398b1bab58a6f1a8", size = 344551, upload-time = "2025-10-17T11:30:28.252Z" },
+    { url = "https://files.pythonhosted.org/packages/31/6d/a0bed13676b1398f9b3ba61f32569f20a3ff270291161100956a577b2dd3/jiter-0.11.1-cp314-cp314t-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:ad93e3d67a981f96596d65d2298fe8d1aa649deb5374a2fb6a434410ee11915e", size = 363051, upload-time = "2025-10-17T11:30:30.009Z" },
+    { url = "https://files.pythonhosted.org/packages/a4/03/313eda04aa08545a5a04ed5876e52f49ab76a4d98e54578896ca3e16313e/jiter-0.11.1-cp314-cp314t-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:a83097ce379e202dcc3fe3fc71a16d523d1ee9192c8e4e854158f96b3efe3f2f", size = 485897, upload-time = "2025-10-17T11:30:31.429Z" },
+    { url = "https://files.pythonhosted.org/packages/5f/13/a1011b9d325e40b53b1b96a17c010b8646013417f3902f97a86325b19299/jiter-0.11.1-cp314-cp314t-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:7042c51e7fbeca65631eb0c332f90c0c082eab04334e7ccc28a8588e8e2804d9", size = 375224, upload-time = "2025-10-17T11:30:33.18Z" },
+    { url = "https://files.pythonhosted.org/packages/92/da/1b45026b19dd39b419e917165ff0ea629dbb95f374a3a13d2df95e40a6ac/jiter-0.11.1-cp314-cp314t-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:0a68d679c0e47649a61df591660507608adc2652442de7ec8276538ac46abe08", size = 356606, upload-time = "2025-10-17T11:30:34.572Z" },
+    { url = "https://files.pythonhosted.org/packages/7a/0c/9acb0e54d6a8ba59ce923a180ebe824b4e00e80e56cefde86cc8e0a948be/jiter-0.11.1-cp314-cp314t-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:a1b0da75dbf4b6ec0b3c9e604d1ee8beaf15bc046fff7180f7d89e3cdbd3bb51", size = 384003, upload-time = "2025-10-17T11:30:35.987Z" },
+    { url = "https://files.pythonhosted.org/packages/3f/2b/e5a5fe09d6da2145e4eed651e2ce37f3c0cf8016e48b1d302e21fb1628b7/jiter-0.11.1-cp314-cp314t-musllinux_1_1_aarch64.whl", hash = "sha256:69dd514bf0fa31c62147d6002e5ca2b3e7ef5894f5ac6f0a19752385f4e89437", size = 516946, upload-time = "2025-10-17T11:30:37.425Z" },
+    { url = "https://files.pythonhosted.org/packages/5f/fe/db936e16e0228d48eb81f9934e8327e9fde5185e84f02174fcd22a01be87/jiter-0.11.1-cp314-cp314t-musllinux_1_1_x86_64.whl", hash = "sha256:bb31ac0b339efa24c0ca606febd8b77ef11c58d09af1b5f2be4c99e907b11111", size = 507614, upload-time = "2025-10-17T11:30:38.977Z" },
+    { url = "https://files.pythonhosted.org/packages/86/db/c4438e8febfb303486d13c6b72f5eb71cf851e300a0c1f0b4140018dd31f/jiter-0.11.1-cp314-cp314t-win32.whl", hash = "sha256:b2ce0d6156a1d3ad41da3eec63b17e03e296b78b0e0da660876fccfada86d2f7", size = 204043, upload-time = "2025-10-17T11:30:40.308Z" },
+    { url = "https://files.pythonhosted.org/packages/36/59/81badb169212f30f47f817dfaabf965bc9b8204fed906fab58104ee541f9/jiter-0.11.1-cp314-cp314t-win_amd64.whl", hash = "sha256:f4db07d127b54c4a2d43b4cf05ff0193e4f73e0dd90c74037e16df0b29f666e1", size = 204046, upload-time = "2025-10-17T11:30:41.692Z" },
+    { url = "https://files.pythonhosted.org/packages/dd/01/43f7b4eb61db3e565574c4c5714685d042fb652f9eef7e5a3de6aafa943a/jiter-0.11.1-cp314-cp314t-win_arm64.whl", hash = "sha256:28e4fdf2d7ebfc935523e50d1efa3970043cfaa161674fe66f9642409d001dfe", size = 188069, upload-time = "2025-10-17T11:30:43.23Z" },
+]
+
+[[package]]
+name = "lxml"
+version = "6.0.2"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/aa/88/262177de60548e5a2bfc46ad28232c9e9cbde697bd94132aeb80364675cb/lxml-6.0.2.tar.gz", hash = "sha256:cd79f3367bd74b317dda655dc8fcfa304d9eb6e4fb06b7168c5cf27f96e0cd62", size = 4073426, upload-time = "2025-09-22T04:04:59.287Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/53/fd/4e8f0540608977aea078bf6d79f128e0e2c2bba8af1acf775c30baa70460/lxml-6.0.2-cp313-cp313-macosx_10_13_universal2.whl", hash = "sha256:9b33d21594afab46f37ae58dfadd06636f154923c4e8a4d754b0127554eb2e77", size = 8648494, upload-time = "2025-09-22T04:01:54.242Z" },
+    { url = "https://files.pythonhosted.org/packages/5d/f4/2a94a3d3dfd6c6b433501b8d470a1960a20ecce93245cf2db1706adf6c19/lxml-6.0.2-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:6c8963287d7a4c5c9a432ff487c52e9c5618667179c18a204bdedb27310f022f", size = 4661146, upload-time = "2025-09-22T04:01:56.282Z" },
+    { url = "https://files.pythonhosted.org/packages/25/2e/4efa677fa6b322013035d38016f6ae859d06cac67437ca7dc708a6af7028/lxml-6.0.2-cp313-cp313-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:1941354d92699fb5ffe6ed7b32f9649e43c2feb4b97205f75866f7d21aa91452", size = 4946932, upload-time = "2025-09-22T04:01:58.989Z" },
+    { url = "https://files.pythonhosted.org/packages/ce/0f/526e78a6d38d109fdbaa5049c62e1d32fdd70c75fb61c4eadf3045d3d124/lxml-6.0.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:bb2f6ca0ae2d983ded09357b84af659c954722bbf04dea98030064996d156048", size = 5100060, upload-time = "2025-09-22T04:02:00.812Z" },
+    { url = "https://files.pythonhosted.org/packages/81/76/99de58d81fa702cc0ea7edae4f4640416c2062813a00ff24bd70ac1d9c9b/lxml-6.0.2-cp313-cp313-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:eb2a12d704f180a902d7fa778c6d71f36ceb7b0d317f34cdc76a5d05aa1dd1df", size = 5019000, upload-time = "2025-09-22T04:02:02.671Z" },
+    { url = "https://files.pythonhosted.org/packages/b5/35/9e57d25482bc9a9882cb0037fdb9cc18f4b79d85df94fa9d2a89562f1d25/lxml-6.0.2-cp313-cp313-manylinux_2_26_i686.manylinux_2_28_i686.whl", hash = "sha256:6ec0e3f745021bfed19c456647f0298d60a24c9ff86d9d051f52b509663feeb1", size = 5348496, upload-time = "2025-09-22T04:02:04.904Z" },
+    { url = "https://files.pythonhosted.org/packages/a6/8e/cb99bd0b83ccc3e8f0f528e9aa1f7a9965dfec08c617070c5db8d63a87ce/lxml-6.0.2-cp313-cp313-manylinux_2_26_ppc64le.manylinux_2_28_ppc64le.whl", hash = "sha256:846ae9a12d54e368933b9759052d6206a9e8b250291109c48e350c1f1f49d916", size = 5643779, upload-time = "2025-09-22T04:02:06.689Z" },
+    { url = "https://files.pythonhosted.org/packages/d0/34/9e591954939276bb679b73773836c6684c22e56d05980e31d52a9a8deb18/lxml-6.0.2-cp313-cp313-manylinux_2_26_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:ef9266d2aa545d7374938fb5c484531ef5a2ec7f2d573e62f8ce722c735685fd", size = 5244072, upload-time = "2025-09-22T04:02:08.587Z" },
+    { url = "https://files.pythonhosted.org/packages/8d/27/b29ff065f9aaca443ee377aff699714fcbffb371b4fce5ac4ca759e436d5/lxml-6.0.2-cp313-cp313-manylinux_2_31_armv7l.whl", hash = "sha256:4077b7c79f31755df33b795dc12119cb557a0106bfdab0d2c2d97bd3cf3dffa6", size = 4718675, upload-time = "2025-09-22T04:02:10.783Z" },
+    { url = "https://files.pythonhosted.org/packages/2b/9f/f756f9c2cd27caa1a6ef8c32ae47aadea697f5c2c6d07b0dae133c244fbe/lxml-6.0.2-cp313-cp313-manylinux_2_38_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:a7c5d5e5f1081955358533be077166ee97ed2571d6a66bdba6ec2f609a715d1a", size = 5255171, upload-time = "2025-09-22T04:02:12.631Z" },
+    { url = "https://files.pythonhosted.org/packages/61/46/bb85ea42d2cb1bd8395484fd72f38e3389611aa496ac7772da9205bbda0e/lxml-6.0.2-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:8f8d0cbd0674ee89863a523e6994ac25fd5be9c8486acfc3e5ccea679bad2679", size = 5057175, upload-time = "2025-09-22T04:02:14.718Z" },
+    { url = "https://files.pythonhosted.org/packages/95/0c/443fc476dcc8e41577f0af70458c50fe299a97bb6b7505bb1ae09aa7f9ac/lxml-6.0.2-cp313-cp313-musllinux_1_2_armv7l.whl", hash = "sha256:2cbcbf6d6e924c28f04a43f3b6f6e272312a090f269eff68a2982e13e5d57659", size = 4785688, upload-time = "2025-09-22T04:02:16.957Z" },
+    { url = "https://files.pythonhosted.org/packages/48/78/6ef0b359d45bb9697bc5a626e1992fa5d27aa3f8004b137b2314793b50a0/lxml-6.0.2-cp313-cp313-musllinux_1_2_ppc64le.whl", hash = "sha256:dfb874cfa53340009af6bdd7e54ebc0d21012a60a4e65d927c2e477112e63484", size = 5660655, upload-time = "2025-09-22T04:02:18.815Z" },
+    { url = "https://files.pythonhosted.org/packages/ff/ea/e1d33808f386bc1339d08c0dcada6e4712d4ed8e93fcad5f057070b7988a/lxml-6.0.2-cp313-cp313-musllinux_1_2_riscv64.whl", hash = "sha256:fb8dae0b6b8b7f9e96c26fdd8121522ce5de9bb5538010870bd538683d30e9a2", size = 5247695, upload-time = "2025-09-22T04:02:20.593Z" },
+    { url = "https://files.pythonhosted.org/packages/4f/47/eba75dfd8183673725255247a603b4ad606f4ae657b60c6c145b381697da/lxml-6.0.2-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:358d9adae670b63e95bc59747c72f4dc97c9ec58881d4627fe0120da0f90d314", size = 5269841, upload-time = "2025-09-22T04:02:22.489Z" },
+    { url = "https://files.pythonhosted.org/packages/76/04/5c5e2b8577bc936e219becb2e98cdb1aca14a4921a12995b9d0c523502ae/lxml-6.0.2-cp313-cp313-win32.whl", hash = "sha256:e8cd2415f372e7e5a789d743d133ae474290a90b9023197fd78f32e2dc6873e2", size = 3610700, upload-time = "2025-09-22T04:02:24.465Z" },
+    { url = "https://files.pythonhosted.org/packages/fe/0a/4643ccc6bb8b143e9f9640aa54e38255f9d3b45feb2cbe7ae2ca47e8782e/lxml-6.0.2-cp313-cp313-win_amd64.whl", hash = "sha256:b30d46379644fbfc3ab81f8f82ae4de55179414651f110a1514f0b1f8f6cb2d7", size = 4010347, upload-time = "2025-09-22T04:02:26.286Z" },
+    { url = "https://files.pythonhosted.org/packages/31/ef/dcf1d29c3f530577f61e5fe2f1bd72929acf779953668a8a47a479ae6f26/lxml-6.0.2-cp313-cp313-win_arm64.whl", hash = "sha256:13dcecc9946dca97b11b7c40d29fba63b55ab4170d3c0cf8c0c164343b9bfdcf", size = 3671248, upload-time = "2025-09-22T04:02:27.918Z" },
+    { url = "https://files.pythonhosted.org/packages/03/15/d4a377b385ab693ce97b472fe0c77c2b16ec79590e688b3ccc71fba19884/lxml-6.0.2-cp314-cp314-macosx_10_13_universal2.whl", hash = "sha256:b0c732aa23de8f8aec23f4b580d1e52905ef468afb4abeafd3fec77042abb6fe", size = 8659801, upload-time = "2025-09-22T04:02:30.113Z" },
+    { url = "https://files.pythonhosted.org/packages/c8/e8/c128e37589463668794d503afaeb003987373c5f94d667124ffd8078bbd9/lxml-6.0.2-cp314-cp314-macosx_10_13_x86_64.whl", hash = "sha256:4468e3b83e10e0317a89a33d28f7aeba1caa4d1a6fd457d115dd4ffe90c5931d", size = 4659403, upload-time = "2025-09-22T04:02:32.119Z" },
+    { url = "https://files.pythonhosted.org/packages/00/ce/74903904339decdf7da7847bb5741fc98a5451b42fc419a86c0c13d26fe2/lxml-6.0.2-cp314-cp314-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:abd44571493973bad4598a3be7e1d807ed45aa2adaf7ab92ab7c62609569b17d", size = 4966974, upload-time = "2025-09-22T04:02:34.155Z" },
+    { url = "https://files.pythonhosted.org/packages/1f/d3/131dec79ce61c5567fecf82515bd9bc36395df42501b50f7f7f3bd065df0/lxml-6.0.2-cp314-cp314-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:370cd78d5855cfbffd57c422851f7d3864e6ae72d0da615fca4dad8c45d375a5", size = 5102953, upload-time = "2025-09-22T04:02:36.054Z" },
+    { url = "https://files.pythonhosted.org/packages/3a/ea/a43ba9bb750d4ffdd885f2cd333572f5bb900cd2408b67fdda07e85978a0/lxml-6.0.2-cp314-cp314-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:901e3b4219fa04ef766885fb40fa516a71662a4c61b80c94d25336b4934b71c0", size = 5055054, upload-time = "2025-09-22T04:02:38.154Z" },
+    { url = "https://files.pythonhosted.org/packages/60/23/6885b451636ae286c34628f70a7ed1fcc759f8d9ad382d132e1c8d3d9bfd/lxml-6.0.2-cp314-cp314-manylinux_2_26_i686.manylinux_2_28_i686.whl", hash = "sha256:a4bf42d2e4cf52c28cc1812d62426b9503cdb0c87a6de81442626aa7d69707ba", size = 5352421, upload-time = "2025-09-22T04:02:40.413Z" },
+    { url = "https://files.pythonhosted.org/packages/48/5b/fc2ddfc94ddbe3eebb8e9af6e3fd65e2feba4967f6a4e9683875c394c2d8/lxml-6.0.2-cp314-cp314-manylinux_2_26_ppc64le.manylinux_2_28_ppc64le.whl", hash = "sha256:b2c7fdaa4d7c3d886a42534adec7cfac73860b89b4e5298752f60aa5984641a0", size = 5673684, upload-time = "2025-09-22T04:02:42.288Z" },
+    { url = "https://files.pythonhosted.org/packages/29/9c/47293c58cc91769130fbf85531280e8cc7868f7fbb6d92f4670071b9cb3e/lxml-6.0.2-cp314-cp314-manylinux_2_26_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:98a5e1660dc7de2200b00d53fa00bcd3c35a3608c305d45a7bbcaf29fa16e83d", size = 5252463, upload-time = "2025-09-22T04:02:44.165Z" },
+    { url = "https://files.pythonhosted.org/packages/9b/da/ba6eceb830c762b48e711ded880d7e3e89fc6c7323e587c36540b6b23c6b/lxml-6.0.2-cp314-cp314-manylinux_2_31_armv7l.whl", hash = "sha256:dc051506c30b609238d79eda75ee9cab3e520570ec8219844a72a46020901e37", size = 4698437, upload-time = "2025-09-22T04:02:46.524Z" },
+    { url = "https://files.pythonhosted.org/packages/a5/24/7be3f82cb7990b89118d944b619e53c656c97dc89c28cfb143fdb7cd6f4d/lxml-6.0.2-cp314-cp314-manylinux_2_38_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:8799481bbdd212470d17513a54d568f44416db01250f49449647b5ab5b5dccb9", size = 5269890, upload-time = "2025-09-22T04:02:48.812Z" },
+    { url = "https://files.pythonhosted.org/packages/1b/bd/dcfb9ea1e16c665efd7538fc5d5c34071276ce9220e234217682e7d2c4a5/lxml-6.0.2-cp314-cp314-musllinux_1_2_aarch64.whl", hash = "sha256:9261bb77c2dab42f3ecd9103951aeca2c40277701eb7e912c545c1b16e0e4917", size = 5097185, upload-time = "2025-09-22T04:02:50.746Z" },
+    { url = "https://files.pythonhosted.org/packages/21/04/a60b0ff9314736316f28316b694bccbbabe100f8483ad83852d77fc7468e/lxml-6.0.2-cp314-cp314-musllinux_1_2_armv7l.whl", hash = "sha256:65ac4a01aba353cfa6d5725b95d7aed6356ddc0a3cd734de00124d285b04b64f", size = 4745895, upload-time = "2025-09-22T04:02:52.968Z" },
+    { url = "https://files.pythonhosted.org/packages/d6/bd/7d54bd1846e5a310d9c715921c5faa71cf5c0853372adf78aee70c8d7aa2/lxml-6.0.2-cp314-cp314-musllinux_1_2_ppc64le.whl", hash = "sha256:b22a07cbb82fea98f8a2fd814f3d1811ff9ed76d0fc6abc84eb21527596e7cc8", size = 5695246, upload-time = "2025-09-22T04:02:54.798Z" },
+    { url = "https://files.pythonhosted.org/packages/fd/32/5643d6ab947bc371da21323acb2a6e603cedbe71cb4c99c8254289ab6f4e/lxml-6.0.2-cp314-cp314-musllinux_1_2_riscv64.whl", hash = "sha256:d759cdd7f3e055d6bc8d9bec3ad905227b2e4c785dc16c372eb5b5e83123f48a", size = 5260797, upload-time = "2025-09-22T04:02:57.058Z" },
+    { url = "https://files.pythonhosted.org/packages/33/da/34c1ec4cff1eea7d0b4cd44af8411806ed943141804ac9c5d565302afb78/lxml-6.0.2-cp314-cp314-musllinux_1_2_x86_64.whl", hash = "sha256:945da35a48d193d27c188037a05fec5492937f66fb1958c24fc761fb9d40d43c", size = 5277404, upload-time = "2025-09-22T04:02:58.966Z" },
+    { url = "https://files.pythonhosted.org/packages/82/57/4eca3e31e54dc89e2c3507e1cd411074a17565fa5ffc437c4ae0a00d439e/lxml-6.0.2-cp314-cp314-win32.whl", hash = "sha256:be3aaa60da67e6153eb15715cc2e19091af5dc75faef8b8a585aea372507384b", size = 3670072, upload-time = "2025-09-22T04:03:38.05Z" },
+    { url = "https://files.pythonhosted.org/packages/e3/e0/c96cf13eccd20c9421ba910304dae0f619724dcf1702864fd59dd386404d/lxml-6.0.2-cp314-cp314-win_amd64.whl", hash = "sha256:fa25afbadead523f7001caf0c2382afd272c315a033a7b06336da2637d92d6ed", size = 4080617, upload-time = "2025-09-22T04:03:39.835Z" },
+    { url = "https://files.pythonhosted.org/packages/d5/5d/b3f03e22b3d38d6f188ef044900a9b29b2fe0aebb94625ce9fe244011d34/lxml-6.0.2-cp314-cp314-win_arm64.whl", hash = "sha256:063eccf89df5b24e361b123e257e437f9e9878f425ee9aae3144c77faf6da6d8", size = 3754930, upload-time = "2025-09-22T04:03:41.565Z" },
+    { url = "https://files.pythonhosted.org/packages/5e/5c/42c2c4c03554580708fc738d13414801f340c04c3eff90d8d2d227145275/lxml-6.0.2-cp314-cp314t-macosx_10_13_universal2.whl", hash = "sha256:6162a86d86893d63084faaf4ff937b3daea233e3682fb4474db07395794fa80d", size = 8910380, upload-time = "2025-09-22T04:03:01.645Z" },
+    { url = "https://files.pythonhosted.org/packages/bf/4f/12df843e3e10d18d468a7557058f8d3733e8b6e12401f30b1ef29360740f/lxml-6.0.2-cp314-cp314t-macosx_10_13_x86_64.whl", hash = "sha256:414aaa94e974e23a3e92e7ca5b97d10c0cf37b6481f50911032c69eeb3991bba", size = 4775632, upload-time = "2025-09-22T04:03:03.814Z" },
+    { url = "https://files.pythonhosted.org/packages/e4/0c/9dc31e6c2d0d418483cbcb469d1f5a582a1cd00a1f4081953d44051f3c50/lxml-6.0.2-cp314-cp314t-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:48461bd21625458dd01e14e2c38dd0aea69addc3c4f960c30d9f59d7f93be601", size = 4975171, upload-time = "2025-09-22T04:03:05.651Z" },
+    { url = "https://files.pythonhosted.org/packages/e7/2b/9b870c6ca24c841bdd887504808f0417aa9d8d564114689266f19ddf29c8/lxml-6.0.2-cp314-cp314t-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:25fcc59afc57d527cfc78a58f40ab4c9b8fd096a9a3f964d2781ffb6eb33f4ed", size = 5110109, upload-time = "2025-09-22T04:03:07.452Z" },
+    { url = "https://files.pythonhosted.org/packages/bf/0c/4f5f2a4dd319a178912751564471355d9019e220c20d7db3fb8307ed8582/lxml-6.0.2-cp314-cp314t-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:5179c60288204e6ddde3f774a93350177e08876eaf3ab78aa3a3649d43eb7d37", size = 5041061, upload-time = "2025-09-22T04:03:09.297Z" },
+    { url = "https://files.pythonhosted.org/packages/12/64/554eed290365267671fe001a20d72d14f468ae4e6acef1e179b039436967/lxml-6.0.2-cp314-cp314t-manylinux_2_26_i686.manylinux_2_28_i686.whl", hash = "sha256:967aab75434de148ec80597b75062d8123cadf2943fb4281f385141e18b21338", size = 5306233, upload-time = "2025-09-22T04:03:11.651Z" },
+    { url = "https://files.pythonhosted.org/packages/7a/31/1d748aa275e71802ad9722df32a7a35034246b42c0ecdd8235412c3396ef/lxml-6.0.2-cp314-cp314t-manylinux_2_26_ppc64le.manylinux_2_28_ppc64le.whl", hash = "sha256:d100fcc8930d697c6561156c6810ab4a508fb264c8b6779e6e61e2ed5e7558f9", size = 5604739, upload-time = "2025-09-22T04:03:13.592Z" },
+    { url = "https://files.pythonhosted.org/packages/8f/41/2c11916bcac09ed561adccacceaedd2bf0e0b25b297ea92aab99fd03d0fa/lxml-6.0.2-cp314-cp314t-manylinux_2_26_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:2ca59e7e13e5981175b8b3e4ab84d7da57993eeff53c07764dcebda0d0e64ecd", size = 5225119, upload-time = "2025-09-22T04:03:15.408Z" },
+    { url = "https://files.pythonhosted.org/packages/99/05/4e5c2873d8f17aa018e6afde417c80cc5d0c33be4854cce3ef5670c49367/lxml-6.0.2-cp314-cp314t-manylinux_2_31_armv7l.whl", hash = "sha256:957448ac63a42e2e49531b9d6c0fa449a1970dbc32467aaad46f11545be9af1d", size = 4633665, upload-time = "2025-09-22T04:03:17.262Z" },
+    { url = "https://files.pythonhosted.org/packages/0f/c9/dcc2da1bebd6275cdc723b515f93edf548b82f36a5458cca3578bc899332/lxml-6.0.2-cp314-cp314t-manylinux_2_38_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:b7fc49c37f1786284b12af63152fe1d0990722497e2d5817acfe7a877522f9a9", size = 5234997, upload-time = "2025-09-22T04:03:19.14Z" },
+    { url = "https://files.pythonhosted.org/packages/9c/e2/5172e4e7468afca64a37b81dba152fc5d90e30f9c83c7c3213d6a02a5ce4/lxml-6.0.2-cp314-cp314t-musllinux_1_2_aarch64.whl", hash = "sha256:e19e0643cc936a22e837f79d01a550678da8377d7d801a14487c10c34ee49c7e", size = 5090957, upload-time = "2025-09-22T04:03:21.436Z" },
+    { url = "https://files.pythonhosted.org/packages/a5/b3/15461fd3e5cd4ddcb7938b87fc20b14ab113b92312fc97afe65cd7c85de1/lxml-6.0.2-cp314-cp314t-musllinux_1_2_armv7l.whl", hash = "sha256:1db01e5cf14345628e0cbe71067204db658e2fb8e51e7f33631f5f4735fefd8d", size = 4764372, upload-time = "2025-09-22T04:03:23.27Z" },
+    { url = "https://files.pythonhosted.org/packages/05/33/f310b987c8bf9e61c4dd8e8035c416bd3230098f5e3cfa69fc4232de7059/lxml-6.0.2-cp314-cp314t-musllinux_1_2_ppc64le.whl", hash = "sha256:875c6b5ab39ad5291588aed6925fac99d0097af0dd62f33c7b43736043d4a2ec", size = 5634653, upload-time = "2025-09-22T04:03:25.767Z" },
+    { url = "https://files.pythonhosted.org/packages/70/ff/51c80e75e0bc9382158133bdcf4e339b5886c6ee2418b5199b3f1a61ed6d/lxml-6.0.2-cp314-cp314t-musllinux_1_2_riscv64.whl", hash = "sha256:cdcbed9ad19da81c480dfd6dd161886db6096083c9938ead313d94b30aadf272", size = 5233795, upload-time = "2025-09-22T04:03:27.62Z" },
+    { url = "https://files.pythonhosted.org/packages/56/4d/4856e897df0d588789dd844dbed9d91782c4ef0b327f96ce53c807e13128/lxml-6.0.2-cp314-cp314t-musllinux_1_2_x86_64.whl", hash = "sha256:80dadc234ebc532e09be1975ff538d154a7fa61ea5031c03d25178855544728f", size = 5257023, upload-time = "2025-09-22T04:03:30.056Z" },
+    { url = "https://files.pythonhosted.org/packages/0f/85/86766dfebfa87bea0ab78e9ff7a4b4b45225df4b4d3b8cc3c03c5cd68464/lxml-6.0.2-cp314-cp314t-win32.whl", hash = "sha256:da08e7bb297b04e893d91087df19638dc7a6bb858a954b0cc2b9f5053c922312", size = 3911420, upload-time = "2025-09-22T04:03:32.198Z" },
+    { url = "https://files.pythonhosted.org/packages/fe/1a/b248b355834c8e32614650b8008c69ffeb0ceb149c793961dd8c0b991bb3/lxml-6.0.2-cp314-cp314t-win_amd64.whl", hash = "sha256:252a22982dca42f6155125ac76d3432e548a7625d56f5a273ee78a5057216eca", size = 4406837, upload-time = "2025-09-22T04:03:34.027Z" },
+    { url = "https://files.pythonhosted.org/packages/92/aa/df863bcc39c5e0946263454aba394de8a9084dbaff8ad143846b0d844739/lxml-6.0.2-cp314-cp314t-win_arm64.whl", hash = "sha256:bb4c1847b303835d89d785a18801a883436cdfd5dc3d62947f9c49e24f0f5a2c", size = 3822205, upload-time = "2025-09-22T04:03:36.249Z" },
+]
+
+[[package]]
+name = "openai"
+version = "2.7.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "anyio" },
+    { name = "distro" },
+    { name = "httpx" },
+    { name = "jiter" },
+    { name = "pydantic" },
+    { name = "sniffio" },
+    { name = "tqdm" },
+    { name = "typing-extensions" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/51/a2/f4023c1e0c868a6a5854955b3374f17153388aed95e835af114a17eac95b/openai-2.7.1.tar.gz", hash = "sha256:df4d4a3622b2df3475ead8eb0fbb3c27fd1c070fa2e55d778ca4f40e0186c726", size = 595933, upload-time = "2025-11-04T06:07:23.069Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/8c/74/6bfc3adc81f6c2cea4439f2a734c40e3a420703bbcdc539890096a732bbd/openai-2.7.1-py3-none-any.whl", hash = "sha256:2f2530354d94c59c614645a4662b9dab0a5b881c5cd767a8587398feac0c9021", size = 1008780, upload-time = "2025-11-04T06:07:20.818Z" },
+]
+
+[[package]]
+name = "packaging"
+version = "25.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/a1/d4/1fc4078c65507b51b96ca8f8c3ba19e6a61c8253c72794544580a7b6c24d/packaging-25.0.tar.gz", hash = "sha256:d443872c98d677bf60f6a1f2f8c1cb748e8fe762d2bf9d3148b5599295b0fc4f", size = 165727, upload-time = "2025-04-19T11:48:59.673Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/20/12/38679034af332785aac8774540895e234f4d07f7545804097de4b666afd8/packaging-25.0-py3-none-any.whl", hash = "sha256:29572ef2b1f17581046b3a2227d5c611fb25ec70ca1ba8554b24b0e69331a484", size = 66469, upload-time = "2025-04-19T11:48:57.875Z" },
+]
+
+[[package]]
+name = "pdf2md"
+version = "0.1.0"
+source = { virtual = "." }
+dependencies = [
+    { name = "desktop-notifier" },
+    { name = "image2pdf" },
+    { name = "img2pdf" },
+    { name = "openai" },
+    { name = "pillow" },
+    { name = "pymupdf" },
+]
+
+[package.metadata]
+requires-dist = [
+    { name = "desktop-notifier", specifier = ">=6.2.0" },
+    { name = "image2pdf", specifier = ">=1.0.0" },
+    { name = "img2pdf", specifier = ">=0.6.3" },
+    { name = "openai", specifier = ">=2.7.1" },
+    { name = "pillow", specifier = ">=12.0.0" },
+    { name = "pymupdf", specifier = ">=1.26.6" },
+]
+
+[[package]]
+name = "pikepdf"
+version = "10.0.0"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "deprecated" },
+    { name = "lxml" },
+    { name = "packaging" },
+    { name = "pillow" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/d3/1c/c8c8c53d5f2b1e3e9c9a12ff3442aafd5b368ffb167b03c8328da608d72e/pikepdf-10.0.0.tar.gz", hash = "sha256:f1396843aae147328bf221b778725636a1cf33080a46a583b1d18fbb0ca2bcd3", size = 4547153, upload-time = "2025-10-26T00:03:49.86Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/20/83/e9e79260819b7b5afe2d8d88a074ff723893ec81841ab909254253c4a71e/pikepdf-10.0.0-cp313-cp313-macosx_14_0_arm64.whl", hash = "sha256:f8d0bbcd86c2db9672e130bf4102f08ef06a5644d812a568830d2a04311a809d", size = 4689837, upload-time = "2025-10-26T00:03:19.795Z" },
+    { url = "https://files.pythonhosted.org/packages/3f/16/2523147d4754f514d0649d9ff4fd10ed390f7c12ea5f6bbf30f0b3a52d4d/pikepdf-10.0.0-cp313-cp313-macosx_15_0_x86_64.whl", hash = "sha256:ab65027c1a610fbb616102d2e43f02b316a83376262d6457dbf01a88fe46a09d", size = 4987250, upload-time = "2025-10-26T00:03:21.664Z" },
+    { url = "https://files.pythonhosted.org/packages/e9/a6/7afe362c90502fb26e999aaef3e06972b345479347c9edcdebf037636392/pikepdf-10.0.0-cp313-cp313-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:11c7776261eafee6f8c66cbcb3f578bc4e45f536c2315d8da09a85bc5030d963", size = 2398040, upload-time = "2025-10-26T00:03:24.727Z" },
+    { url = "https://files.pythonhosted.org/packages/46/79/77bfde2cec4edd3f682a4c554555c622ff04d424084a69810456f70ec48a/pikepdf-10.0.0-cp313-cp313-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:d7e238337d6100c43e9d946b60cb2681bdb364ddbca293bfe076af9fd7eb2201", size = 2634102, upload-time = "2025-10-26T00:03:26.896Z" },
+    { url = "https://files.pythonhosted.org/packages/ca/10/5f3f39ed73973f81ff24ca88aa54782bf4af6628e8c1c5171a68f758a42f/pikepdf-10.0.0-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:6fe9deb956b1ba62e9f3ea842fd5ee9be2b9be60532d7d949085c77a4e68c091", size = 3588758, upload-time = "2025-10-26T00:03:28.757Z" },
+    { url = "https://files.pythonhosted.org/packages/88/61/f0b179ef937ff2998516c6a3fee28070b5f3a1312e1fc38e5520621583d0/pikepdf-10.0.0-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:dc328ef67c0769e68eda1576f3ded167cbbc3f4cdfe11695fd34794694d21fa9", size = 3791553, upload-time = "2025-10-26T00:03:31.593Z" },
+    { url = "https://files.pythonhosted.org/packages/70/d6/d8397f93ae46ec2eb4897dd6068c22475b87c9f472f67e836cf2352c1e72/pikepdf-10.0.0-cp313-cp313-win_amd64.whl", hash = "sha256:d5b79a0066c01f398a468df85e3adc16625fc8842f0bb6a3596753ba1e0cfa4c", size = 3728920, upload-time = "2025-10-26T00:03:33.814Z" },
+    { url = "https://files.pythonhosted.org/packages/7d/cd/b5f7c0114fa64ff5af8b0046d740a089536cff47804b28925a4a14c98de4/pikepdf-10.0.0-cp314-cp314-macosx_14_0_arm64.whl", hash = "sha256:01667d7ec20b1260363e728854d57cedefe12929a0b1dc9786355f8260573776", size = 4685751, upload-time = "2025-10-26T00:03:35.928Z" },
+    { url = "https://files.pythonhosted.org/packages/61/92/af19b1b2fc340e3dbd0616e09533073cd75ca216fcf530c6b23cfd0979a6/pikepdf-10.0.0-cp314-cp314-macosx_15_0_x86_64.whl", hash = "sha256:f1b3e771d2b61d1ce3f18a5c5b89d51d851d4cf05bc3f6ff0ec7473a1600ddc4", size = 4987951, upload-time = "2025-10-26T00:03:37.82Z" },
+    { url = "https://files.pythonhosted.org/packages/26/17/adb14cfbb66cd0da7948d96ec28cc14819b701fa04a711b4f173b48c4052/pikepdf-10.0.0-cp314-cp314-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:ccede092076c0ff168430eda71d428cb47340061678346ecdf056514dd3bf27e", size = 2403275, upload-time = "2025-10-26T00:03:39.597Z" },
+    { url = "https://files.pythonhosted.org/packages/86/c6/ea1567b259308087ff0d015d635a8a4ec8973d436c87a4cdde1c5d22b7cd/pikepdf-10.0.0-cp314-cp314-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:fb4cff5065bd9da8d2f0421e8c7138b86cfe4a819977bd69cd89607cd352d40d", size = 2636830, upload-time = "2025-10-26T00:03:41.914Z" },
+    { url = "https://files.pythonhosted.org/packages/48/e4/66063b3a20f0683a8784f2da5ee3a9a3fa6299d034969a9d2f9022e904d2/pikepdf-10.0.0-cp314-cp314-musllinux_1_2_aarch64.whl", hash = "sha256:a704fb36e1327ae646d218916ac8ee6c2934b82ab85146956334f217f01192e0", size = 3594990, upload-time = "2025-10-26T00:03:43.708Z" },
+    { url = "https://files.pythonhosted.org/packages/61/eb/e53b4332a73be36544330542c6e5bc4713cfb49001c722f41050453b00f0/pikepdf-10.0.0-cp314-cp314-musllinux_1_2_x86_64.whl", hash = "sha256:9f4102fcc8fb7031cce4cc3b77f8606a0254dd30794769d4e9f96b9a1e061d72", size = 3795084, upload-time = "2025-10-26T00:03:46.014Z" },
+    { url = "https://files.pythonhosted.org/packages/ee/de/977441b738891c8d2637ca49e4aad1bf2bb6ca92d67a918509d52929637a/pikepdf-10.0.0-cp314-cp314-win_amd64.whl", hash = "sha256:8c6e2668fdcd2ca45f5b71f40e1f97524ca828f087c283a0c7bf33c61ebeafcf", size = 3833698, upload-time = "2025-10-26T00:03:47.89Z" },
+]
+
+[[package]]
+name = "pillow"
+version = "12.0.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/5a/b0/cace85a1b0c9775a9f8f5d5423c8261c858760e2466c79b2dd184638b056/pillow-12.0.0.tar.gz", hash = "sha256:87d4f8125c9988bfbed67af47dd7a953e2fc7b0cc1e7800ec6d2080d490bb353", size = 47008828, upload-time = "2025-10-15T18:24:14.008Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/62/f2/de993bb2d21b33a98d031ecf6a978e4b61da207bef02f7b43093774c480d/pillow-12.0.0-cp313-cp313-ios_13_0_arm64_iphoneos.whl", hash = "sha256:0869154a2d0546545cde61d1789a6524319fc1897d9ee31218eae7a60ccc5643", size = 4045493, upload-time = "2025-10-15T18:22:25.758Z" },
+    { url = "https://files.pythonhosted.org/packages/0e/b6/bc8d0c4c9f6f111a783d045310945deb769b806d7574764234ffd50bc5ea/pillow-12.0.0-cp313-cp313-ios_13_0_arm64_iphonesimulator.whl", hash = "sha256:a7921c5a6d31b3d756ec980f2f47c0cfdbce0fc48c22a39347a895f41f4a6ea4", size = 4120461, upload-time = "2025-10-15T18:22:27.286Z" },
+    { url = "https://files.pythonhosted.org/packages/5d/57/d60d343709366a353dc56adb4ee1e7d8a2cc34e3fbc22905f4167cfec119/pillow-12.0.0-cp313-cp313-ios_13_0_x86_64_iphonesimulator.whl", hash = "sha256:1ee80a59f6ce048ae13cda1abf7fbd2a34ab9ee7d401c46be3ca685d1999a399", size = 3576912, upload-time = "2025-10-15T18:22:28.751Z" },
+    { url = "https://files.pythonhosted.org/packages/a4/a4/a0a31467e3f83b94d37568294b01d22b43ae3c5d85f2811769b9c66389dd/pillow-12.0.0-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:c50f36a62a22d350c96e49ad02d0da41dbd17ddc2e29750dbdba4323f85eb4a5", size = 5249132, upload-time = "2025-10-15T18:22:30.641Z" },
+    { url = "https://files.pythonhosted.org/packages/83/06/48eab21dd561de2914242711434c0c0eb992ed08ff3f6107a5f44527f5e9/pillow-12.0.0-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:5193fde9a5f23c331ea26d0cf171fbf67e3f247585f50c08b3e205c7aeb4589b", size = 4650099, upload-time = "2025-10-15T18:22:32.73Z" },
+    { url = "https://files.pythonhosted.org/packages/fc/bd/69ed99fd46a8dba7c1887156d3572fe4484e3f031405fcc5a92e31c04035/pillow-12.0.0-cp313-cp313-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:bde737cff1a975b70652b62d626f7785e0480918dece11e8fef3c0cf057351c3", size = 6230808, upload-time = "2025-10-15T18:22:34.337Z" },
+    { url = "https://files.pythonhosted.org/packages/ea/94/8fad659bcdbf86ed70099cb60ae40be6acca434bbc8c4c0d4ef356d7e0de/pillow-12.0.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:a6597ff2b61d121172f5844b53f21467f7082f5fb385a9a29c01414463f93b07", size = 8037804, upload-time = "2025-10-15T18:22:36.402Z" },
+    { url = "https://files.pythonhosted.org/packages/20/39/c685d05c06deecfd4e2d1950e9a908aa2ca8bc4e6c3b12d93b9cafbd7837/pillow-12.0.0-cp313-cp313-manylinux_2_27_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:0b817e7035ea7f6b942c13aa03bb554fc44fea70838ea21f8eb31c638326584e", size = 6345553, upload-time = "2025-10-15T18:22:38.066Z" },
+    { url = "https://files.pythonhosted.org/packages/38/57/755dbd06530a27a5ed74f8cb0a7a44a21722ebf318edbe67ddbd7fb28f88/pillow-12.0.0-cp313-cp313-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:f4f1231b7dec408e8670264ce63e9c71409d9583dd21d32c163e25213ee2a344", size = 7037729, upload-time = "2025-10-15T18:22:39.769Z" },
+    { url = "https://files.pythonhosted.org/packages/ca/b6/7e94f4c41d238615674d06ed677c14883103dce1c52e4af16f000338cfd7/pillow-12.0.0-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:6e51b71417049ad6ab14c49608b4a24d8fb3fe605e5dfabfe523b58064dc3d27", size = 6459789, upload-time = "2025-10-15T18:22:41.437Z" },
+    { url = "https://files.pythonhosted.org/packages/9c/14/4448bb0b5e0f22dd865290536d20ec8a23b64e2d04280b89139f09a36bb6/pillow-12.0.0-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:d120c38a42c234dc9a8c5de7ceaaf899cf33561956acb4941653f8bdc657aa79", size = 7130917, upload-time = "2025-10-15T18:22:43.152Z" },
+    { url = "https://files.pythonhosted.org/packages/dd/ca/16c6926cc1c015845745d5c16c9358e24282f1e588237a4c36d2b30f182f/pillow-12.0.0-cp313-cp313-win32.whl", hash = "sha256:4cc6b3b2efff105c6a1656cfe59da4fdde2cda9af1c5e0b58529b24525d0a098", size = 6302391, upload-time = "2025-10-15T18:22:44.753Z" },
+    { url = "https://files.pythonhosted.org/packages/6d/2a/dd43dcfd6dae9b6a49ee28a8eedb98c7d5ff2de94a5d834565164667b97b/pillow-12.0.0-cp313-cp313-win_amd64.whl", hash = "sha256:4cf7fed4b4580601c4345ceb5d4cbf5a980d030fd5ad07c4d2ec589f95f09905", size = 7007477, upload-time = "2025-10-15T18:22:46.838Z" },
+    { url = "https://files.pythonhosted.org/packages/77/f0/72ea067f4b5ae5ead653053212af05ce3705807906ba3f3e8f58ddf617e6/pillow-12.0.0-cp313-cp313-win_arm64.whl", hash = "sha256:9f0b04c6b8584c2c193babcccc908b38ed29524b29dd464bc8801bf10d746a3a", size = 2435918, upload-time = "2025-10-15T18:22:48.399Z" },
+    { url = "https://files.pythonhosted.org/packages/f5/5e/9046b423735c21f0487ea6cb5b10f89ea8f8dfbe32576fe052b5ba9d4e5b/pillow-12.0.0-cp313-cp313t-macosx_10_13_x86_64.whl", hash = "sha256:7fa22993bac7b77b78cae22bad1e2a987ddf0d9015c63358032f84a53f23cdc3", size = 5251406, upload-time = "2025-10-15T18:22:49.905Z" },
+    { url = "https://files.pythonhosted.org/packages/12/66/982ceebcdb13c97270ef7a56c3969635b4ee7cd45227fa707c94719229c5/pillow-12.0.0-cp313-cp313t-macosx_11_0_arm64.whl", hash = "sha256:f135c702ac42262573fe9714dfe99c944b4ba307af5eb507abef1667e2cbbced", size = 4653218, upload-time = "2025-10-15T18:22:51.587Z" },
+    { url = "https://files.pythonhosted.org/packages/16/b3/81e625524688c31859450119bf12674619429cab3119eec0e30a7a1029cb/pillow-12.0.0-cp313-cp313t-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:c85de1136429c524e55cfa4e033b4a7940ac5c8ee4d9401cc2d1bf48154bbc7b", size = 6266564, upload-time = "2025-10-15T18:22:53.215Z" },
+    { url = "https://files.pythonhosted.org/packages/98/59/dfb38f2a41240d2408096e1a76c671d0a105a4a8471b1871c6902719450c/pillow-12.0.0-cp313-cp313t-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:38df9b4bfd3db902c9c2bd369bcacaf9d935b2fff73709429d95cc41554f7b3d", size = 8069260, upload-time = "2025-10-15T18:22:54.933Z" },
+    { url = "https://files.pythonhosted.org/packages/dc/3d/378dbea5cd1874b94c312425ca77b0f47776c78e0df2df751b820c8c1d6c/pillow-12.0.0-cp313-cp313t-manylinux_2_27_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:7d87ef5795da03d742bf49439f9ca4d027cde49c82c5371ba52464aee266699a", size = 6379248, upload-time = "2025-10-15T18:22:56.605Z" },
+    { url = "https://files.pythonhosted.org/packages/84/b0/d525ef47d71590f1621510327acec75ae58c721dc071b17d8d652ca494d8/pillow-12.0.0-cp313-cp313t-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:aff9e4d82d082ff9513bdd6acd4f5bd359f5b2c870907d2b0a9c5e10d40c88fe", size = 7066043, upload-time = "2025-10-15T18:22:58.53Z" },
+    { url = "https://files.pythonhosted.org/packages/61/2c/aced60e9cf9d0cde341d54bf7932c9ffc33ddb4a1595798b3a5150c7ec4e/pillow-12.0.0-cp313-cp313t-musllinux_1_2_aarch64.whl", hash = "sha256:8d8ca2b210ada074d57fcee40c30446c9562e542fc46aedc19baf758a93532ee", size = 6490915, upload-time = "2025-10-15T18:23:00.582Z" },
+    { url = "https://files.pythonhosted.org/packages/ef/26/69dcb9b91f4e59f8f34b2332a4a0a951b44f547c4ed39d3e4dcfcff48f89/pillow-12.0.0-cp313-cp313t-musllinux_1_2_x86_64.whl", hash = "sha256:99a7f72fb6249302aa62245680754862a44179b545ded638cf1fef59befb57ef", size = 7157998, upload-time = "2025-10-15T18:23:02.627Z" },
+    { url = "https://files.pythonhosted.org/packages/61/2b/726235842220ca95fa441ddf55dd2382b52ab5b8d9c0596fe6b3f23dafe8/pillow-12.0.0-cp313-cp313t-win32.whl", hash = "sha256:4078242472387600b2ce8d93ade8899c12bf33fa89e55ec89fe126e9d6d5d9e9", size = 6306201, upload-time = "2025-10-15T18:23:04.709Z" },
+    { url = "https://files.pythonhosted.org/packages/c0/3d/2afaf4e840b2df71344ababf2f8edd75a705ce500e5dc1e7227808312ae1/pillow-12.0.0-cp313-cp313t-win_amd64.whl", hash = "sha256:2c54c1a783d6d60595d3514f0efe9b37c8808746a66920315bfd34a938d7994b", size = 7013165, upload-time = "2025-10-15T18:23:06.46Z" },
+    { url = "https://files.pythonhosted.org/packages/6f/75/3fa09aa5cf6ed04bee3fa575798ddf1ce0bace8edb47249c798077a81f7f/pillow-12.0.0-cp313-cp313t-win_arm64.whl", hash = "sha256:26d9f7d2b604cd23aba3e9faf795787456ac25634d82cd060556998e39c6fa47", size = 2437834, upload-time = "2025-10-15T18:23:08.194Z" },
+    { url = "https://files.pythonhosted.org/packages/54/2a/9a8c6ba2c2c07b71bec92cf63e03370ca5e5f5c5b119b742bcc0cde3f9c5/pillow-12.0.0-cp314-cp314-ios_13_0_arm64_iphoneos.whl", hash = "sha256:beeae3f27f62308f1ddbcfb0690bf44b10732f2ef43758f169d5e9303165d3f9", size = 4045531, upload-time = "2025-10-15T18:23:10.121Z" },
+    { url = "https://files.pythonhosted.org/packages/84/54/836fdbf1bfb3d66a59f0189ff0b9f5f666cee09c6188309300df04ad71fa/pillow-12.0.0-cp314-cp314-ios_13_0_arm64_iphonesimulator.whl", hash = "sha256:d4827615da15cd59784ce39d3388275ec093ae3ee8d7f0c089b76fa87af756c2", size = 4120554, upload-time = "2025-10-15T18:23:12.14Z" },
+    { url = "https://files.pythonhosted.org/packages/0d/cd/16aec9f0da4793e98e6b54778a5fbce4f375c6646fe662e80600b8797379/pillow-12.0.0-cp314-cp314-ios_13_0_x86_64_iphonesimulator.whl", hash = "sha256:3e42edad50b6909089750e65c91aa09aaf1e0a71310d383f11321b27c224ed8a", size = 3576812, upload-time = "2025-10-15T18:23:13.962Z" },
+    { url = "https://files.pythonhosted.org/packages/f6/b7/13957fda356dc46339298b351cae0d327704986337c3c69bb54628c88155/pillow-12.0.0-cp314-cp314-macosx_10_15_x86_64.whl", hash = "sha256:e5d8efac84c9afcb40914ab49ba063d94f5dbdf5066db4482c66a992f47a3a3b", size = 5252689, upload-time = "2025-10-15T18:23:15.562Z" },
+    { url = "https://files.pythonhosted.org/packages/fc/f5/eae31a306341d8f331f43edb2e9122c7661b975433de5e447939ae61c5da/pillow-12.0.0-cp314-cp314-macosx_11_0_arm64.whl", hash = "sha256:266cd5f2b63ff316d5a1bba46268e603c9caf5606d44f38c2873c380950576ad", size = 4650186, upload-time = "2025-10-15T18:23:17.379Z" },
+    { url = "https://files.pythonhosted.org/packages/86/62/2a88339aa40c4c77e79108facbd307d6091e2c0eb5b8d3cf4977cfca2fe6/pillow-12.0.0-cp314-cp314-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:58eea5ebe51504057dd95c5b77d21700b77615ab0243d8152793dc00eb4faf01", size = 6230308, upload-time = "2025-10-15T18:23:18.971Z" },
+    { url = "https://files.pythonhosted.org/packages/c7/33/5425a8992bcb32d1cb9fa3dd39a89e613d09a22f2c8083b7bf43c455f760/pillow-12.0.0-cp314-cp314-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:f13711b1a5ba512d647a0e4ba79280d3a9a045aaf7e0cc6fbe96b91d4cdf6b0c", size = 8039222, upload-time = "2025-10-15T18:23:20.909Z" },
+    { url = "https://files.pythonhosted.org/packages/d8/61/3f5d3b35c5728f37953d3eec5b5f3e77111949523bd2dd7f31a851e50690/pillow-12.0.0-cp314-cp314-manylinux_2_27_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:6846bd2d116ff42cba6b646edf5bf61d37e5cbd256425fa089fee4ff5c07a99e", size = 6346657, upload-time = "2025-10-15T18:23:23.077Z" },
+    { url = "https://files.pythonhosted.org/packages/3a/be/ee90a3d79271227e0f0a33c453531efd6ed14b2e708596ba5dd9be948da3/pillow-12.0.0-cp314-cp314-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:c98fa880d695de164b4135a52fd2e9cd7b7c90a9d8ac5e9e443a24a95ef9248e", size = 7038482, upload-time = "2025-10-15T18:23:25.005Z" },
+    { url = "https://files.pythonhosted.org/packages/44/34/a16b6a4d1ad727de390e9bd9f19f5f669e079e5826ec0f329010ddea492f/pillow-12.0.0-cp314-cp314-musllinux_1_2_aarch64.whl", hash = "sha256:fa3ed2a29a9e9d2d488b4da81dcb54720ac3104a20bf0bd273f1e4648aff5af9", size = 6461416, upload-time = "2025-10-15T18:23:27.009Z" },
+    { url = "https://files.pythonhosted.org/packages/b6/39/1aa5850d2ade7d7ba9f54e4e4c17077244ff7a2d9e25998c38a29749eb3f/pillow-12.0.0-cp314-cp314-musllinux_1_2_x86_64.whl", hash = "sha256:d034140032870024e6b9892c692fe2968493790dd57208b2c37e3fb35f6df3ab", size = 7131584, upload-time = "2025-10-15T18:23:29.752Z" },
+    { url = "https://files.pythonhosted.org/packages/bf/db/4fae862f8fad0167073a7733973bfa955f47e2cac3dc3e3e6257d10fab4a/pillow-12.0.0-cp314-cp314-win32.whl", hash = "sha256:1b1b133e6e16105f524a8dec491e0586d072948ce15c9b914e41cdadd209052b", size = 6400621, upload-time = "2025-10-15T18:23:32.06Z" },
+    { url = "https://files.pythonhosted.org/packages/2b/24/b350c31543fb0107ab2599464d7e28e6f856027aadda995022e695313d94/pillow-12.0.0-cp314-cp314-win_amd64.whl", hash = "sha256:8dc232e39d409036af549c86f24aed8273a40ffa459981146829a324e0848b4b", size = 7142916, upload-time = "2025-10-15T18:23:34.71Z" },
+    { url = "https://files.pythonhosted.org/packages/0f/9b/0ba5a6fd9351793996ef7487c4fdbde8d3f5f75dbedc093bb598648fddf0/pillow-12.0.0-cp314-cp314-win_arm64.whl", hash = "sha256:d52610d51e265a51518692045e372a4c363056130d922a7351429ac9f27e70b0", size = 2523836, upload-time = "2025-10-15T18:23:36.967Z" },
+    { url = "https://files.pythonhosted.org/packages/f5/7a/ceee0840aebc579af529b523d530840338ecf63992395842e54edc805987/pillow-12.0.0-cp314-cp314t-macosx_10_15_x86_64.whl", hash = "sha256:1979f4566bb96c1e50a62d9831e2ea2d1211761e5662afc545fa766f996632f6", size = 5255092, upload-time = "2025-10-15T18:23:38.573Z" },
+    { url = "https://files.pythonhosted.org/packages/44/76/20776057b4bfd1aef4eeca992ebde0f53a4dce874f3ae693d0ec90a4f79b/pillow-12.0.0-cp314-cp314t-macosx_11_0_arm64.whl", hash = "sha256:b2e4b27a6e15b04832fe9bf292b94b5ca156016bbc1ea9c2c20098a0320d6cf6", size = 4653158, upload-time = "2025-10-15T18:23:40.238Z" },
+    { url = "https://files.pythonhosted.org/packages/82/3f/d9ff92ace07be8836b4e7e87e6a4c7a8318d47c2f1463ffcf121fc57d9cb/pillow-12.0.0-cp314-cp314t-manylinux2014_aarch64.manylinux_2_17_aarch64.whl", hash = "sha256:fb3096c30df99fd01c7bf8e544f392103d0795b9f98ba71a8054bcbf56b255f1", size = 6267882, upload-time = "2025-10-15T18:23:42.434Z" },
+    { url = "https://files.pythonhosted.org/packages/9f/7a/4f7ff87f00d3ad33ba21af78bfcd2f032107710baf8280e3722ceec28cda/pillow-12.0.0-cp314-cp314t-manylinux2014_x86_64.manylinux_2_17_x86_64.whl", hash = "sha256:7438839e9e053ef79f7112c881cef684013855016f928b168b81ed5835f3e75e", size = 8071001, upload-time = "2025-10-15T18:23:44.29Z" },
+    { url = "https://files.pythonhosted.org/packages/75/87/fcea108944a52dad8cca0715ae6247e271eb80459364a98518f1e4f480c1/pillow-12.0.0-cp314-cp314t-manylinux_2_27_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:5d5c411a8eaa2299322b647cd932586b1427367fd3184ffbb8f7a219ea2041ca", size = 6380146, upload-time = "2025-10-15T18:23:46.065Z" },
+    { url = "https://files.pythonhosted.org/packages/91/52/0d31b5e571ef5fd111d2978b84603fce26aba1b6092f28e941cb46570745/pillow-12.0.0-cp314-cp314t-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl", hash = "sha256:d7e091d464ac59d2c7ad8e7e08105eaf9dafbc3883fd7265ffccc2baad6ac925", size = 7067344, upload-time = "2025-10-15T18:23:47.898Z" },
+    { url = "https://files.pythonhosted.org/packages/7b/f4/2dd3d721f875f928d48e83bb30a434dee75a2531bca839bb996bb0aa5a91/pillow-12.0.0-cp314-cp314t-musllinux_1_2_aarch64.whl", hash = "sha256:792a2c0be4dcc18af9d4a2dfd8a11a17d5e25274a1062b0ec1c2d79c76f3e7f8", size = 6491864, upload-time = "2025-10-15T18:23:49.607Z" },
+    { url = "https://files.pythonhosted.org/packages/30/4b/667dfcf3d61fc309ba5a15b141845cece5915e39b99c1ceab0f34bf1d124/pillow-12.0.0-cp314-cp314t-musllinux_1_2_x86_64.whl", hash = "sha256:afbefa430092f71a9593a99ab6a4e7538bc9eabbf7bf94f91510d3503943edc4", size = 7158911, upload-time = "2025-10-15T18:23:51.351Z" },
+    { url = "https://files.pythonhosted.org/packages/a2/2f/16cabcc6426c32218ace36bf0d55955e813f2958afddbf1d391849fee9d1/pillow-12.0.0-cp314-cp314t-win32.whl", hash = "sha256:3830c769decf88f1289680a59d4f4c46c72573446352e2befec9a8512104fa52", size = 6408045, upload-time = "2025-10-15T18:23:53.177Z" },
+    { url = "https://files.pythonhosted.org/packages/35/73/e29aa0c9c666cf787628d3f0dcf379f4791fba79f4936d02f8b37165bdf8/pillow-12.0.0-cp314-cp314t-win_amd64.whl", hash = "sha256:905b0365b210c73afb0ebe9101a32572152dfd1c144c7e28968a331b9217b94a", size = 7148282, upload-time = "2025-10-15T18:23:55.316Z" },
+    { url = "https://files.pythonhosted.org/packages/c1/70/6b41bdcddf541b437bbb9f47f94d2db5d9ddef6c37ccab8c9107743748a4/pillow-12.0.0-cp314-cp314t-win_arm64.whl", hash = "sha256:99353a06902c2e43b43e8ff74ee65a7d90307d82370604746738a1e0661ccca7", size = 2525630, upload-time = "2025-10-15T18:23:57.149Z" },
+]
+
+[[package]]
+name = "pydantic"
+version = "2.12.4"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "annotated-types" },
+    { name = "pydantic-core" },
+    { name = "typing-extensions" },
+    { name = "typing-inspection" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/96/ad/a17bc283d7d81837c061c49e3eaa27a45991759a1b7eae1031921c6bd924/pydantic-2.12.4.tar.gz", hash = "sha256:0f8cb9555000a4b5b617f66bfd2566264c4984b27589d3b845685983e8ea85ac", size = 821038, upload-time = "2025-11-05T10:50:08.59Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/82/2f/e68750da9b04856e2a7ec56fc6f034a5a79775e9b9a81882252789873798/pydantic-2.12.4-py3-none-any.whl", hash = "sha256:92d3d202a745d46f9be6df459ac5a064fdaa3c1c4cd8adcfa332ccf3c05f871e", size = 463400, upload-time = "2025-11-05T10:50:06.732Z" },
+]
+
+[[package]]
+name = "pydantic-core"
+version = "2.41.5"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "typing-extensions" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/71/70/23b021c950c2addd24ec408e9ab05d59b035b39d97cdc1130e1bce647bb6/pydantic_core-2.41.5.tar.gz", hash = "sha256:08daa51ea16ad373ffd5e7606252cc32f07bc72b28284b6bc9c6df804816476e", size = 460952, upload-time = "2025-11-04T13:43:49.098Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/87/06/8806241ff1f70d9939f9af039c6c35f2360cf16e93c2ca76f184e76b1564/pydantic_core-2.41.5-cp313-cp313-macosx_10_12_x86_64.whl", hash = "sha256:941103c9be18ac8daf7b7adca8228f8ed6bb7a1849020f643b3a14d15b1924d9", size = 2120403, upload-time = "2025-11-04T13:40:25.248Z" },
+    { url = "https://files.pythonhosted.org/packages/94/02/abfa0e0bda67faa65fef1c84971c7e45928e108fe24333c81f3bfe35d5f5/pydantic_core-2.41.5-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:112e305c3314f40c93998e567879e887a3160bb8689ef3d2c04b6cc62c33ac34", size = 1896206, upload-time = "2025-11-04T13:40:27.099Z" },
+    { url = "https://files.pythonhosted.org/packages/15/df/a4c740c0943e93e6500f9eb23f4ca7ec9bf71b19e608ae5b579678c8d02f/pydantic_core-2.41.5-cp313-cp313-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:0cbaad15cb0c90aa221d43c00e77bb33c93e8d36e0bf74760cd00e732d10a6a0", size = 1919307, upload-time = "2025-11-04T13:40:29.806Z" },
+    { url = "https://files.pythonhosted.org/packages/9a/e3/6324802931ae1d123528988e0e86587c2072ac2e5394b4bc2bc34b61ff6e/pydantic_core-2.41.5-cp313-cp313-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:03ca43e12fab6023fc79d28ca6b39b05f794ad08ec2feccc59a339b02f2b3d33", size = 2063258, upload-time = "2025-11-04T13:40:33.544Z" },
+    { url = "https://files.pythonhosted.org/packages/c9/d4/2230d7151d4957dd79c3044ea26346c148c98fbf0ee6ebd41056f2d62ab5/pydantic_core-2.41.5-cp313-cp313-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:dc799088c08fa04e43144b164feb0c13f9a0bc40503f8df3e9fde58a3c0c101e", size = 2214917, upload-time = "2025-11-04T13:40:35.479Z" },
+    { url = "https://files.pythonhosted.org/packages/e6/9f/eaac5df17a3672fef0081b6c1bb0b82b33ee89aa5cec0d7b05f52fd4a1fa/pydantic_core-2.41.5-cp313-cp313-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:97aeba56665b4c3235a0e52b2c2f5ae9cd071b8a8310ad27bddb3f7fb30e9aa2", size = 2332186, upload-time = "2025-11-04T13:40:37.436Z" },
+    { url = "https://files.pythonhosted.org/packages/cf/4e/35a80cae583a37cf15604b44240e45c05e04e86f9cfd766623149297e971/pydantic_core-2.41.5-cp313-cp313-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:406bf18d345822d6c21366031003612b9c77b3e29ffdb0f612367352aab7d586", size = 2073164, upload-time = "2025-11-04T13:40:40.289Z" },
+    { url = "https://files.pythonhosted.org/packages/bf/e3/f6e262673c6140dd3305d144d032f7bd5f7497d3871c1428521f19f9efa2/pydantic_core-2.41.5-cp313-cp313-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:b93590ae81f7010dbe380cdeab6f515902ebcbefe0b9327cc4804d74e93ae69d", size = 2179146, upload-time = "2025-11-04T13:40:42.809Z" },
+    { url = "https://files.pythonhosted.org/packages/75/c7/20bd7fc05f0c6ea2056a4565c6f36f8968c0924f19b7d97bbfea55780e73/pydantic_core-2.41.5-cp313-cp313-musllinux_1_1_aarch64.whl", hash = "sha256:01a3d0ab748ee531f4ea6c3e48ad9dac84ddba4b0d82291f87248f2f9de8d740", size = 2137788, upload-time = "2025-11-04T13:40:44.752Z" },
+    { url = "https://files.pythonhosted.org/packages/3a/8d/34318ef985c45196e004bc46c6eab2eda437e744c124ef0dbe1ff2c9d06b/pydantic_core-2.41.5-cp313-cp313-musllinux_1_1_armv7l.whl", hash = "sha256:6561e94ba9dacc9c61bce40e2d6bdc3bfaa0259d3ff36ace3b1e6901936d2e3e", size = 2340133, upload-time = "2025-11-04T13:40:46.66Z" },
+    { url = "https://files.pythonhosted.org/packages/9c/59/013626bf8c78a5a5d9350d12e7697d3d4de951a75565496abd40ccd46bee/pydantic_core-2.41.5-cp313-cp313-musllinux_1_1_x86_64.whl", hash = "sha256:915c3d10f81bec3a74fbd4faebe8391013ba61e5a1a8d48c4455b923bdda7858", size = 2324852, upload-time = "2025-11-04T13:40:48.575Z" },
+    { url = "https://files.pythonhosted.org/packages/1a/d9/c248c103856f807ef70c18a4f986693a46a8ffe1602e5d361485da502d20/pydantic_core-2.41.5-cp313-cp313-win32.whl", hash = "sha256:650ae77860b45cfa6e2cdafc42618ceafab3a2d9a3811fcfbd3bbf8ac3c40d36", size = 1994679, upload-time = "2025-11-04T13:40:50.619Z" },
+    { url = "https://files.pythonhosted.org/packages/9e/8b/341991b158ddab181cff136acd2552c9f35bd30380422a639c0671e99a91/pydantic_core-2.41.5-cp313-cp313-win_amd64.whl", hash = "sha256:79ec52ec461e99e13791ec6508c722742ad745571f234ea6255bed38c6480f11", size = 2019766, upload-time = "2025-11-04T13:40:52.631Z" },
+    { url = "https://files.pythonhosted.org/packages/73/7d/f2f9db34af103bea3e09735bb40b021788a5e834c81eedb541991badf8f5/pydantic_core-2.41.5-cp313-cp313-win_arm64.whl", hash = "sha256:3f84d5c1b4ab906093bdc1ff10484838aca54ef08de4afa9de0f5f14d69639cd", size = 1981005, upload-time = "2025-11-04T13:40:54.734Z" },
+    { url = "https://files.pythonhosted.org/packages/ea/28/46b7c5c9635ae96ea0fbb779e271a38129df2550f763937659ee6c5dbc65/pydantic_core-2.41.5-cp314-cp314-macosx_10_12_x86_64.whl", hash = "sha256:3f37a19d7ebcdd20b96485056ba9e8b304e27d9904d233d7b1015db320e51f0a", size = 2119622, upload-time = "2025-11-04T13:40:56.68Z" },
+    { url = "https://files.pythonhosted.org/packages/74/1a/145646e5687e8d9a1e8d09acb278c8535ebe9e972e1f162ed338a622f193/pydantic_core-2.41.5-cp314-cp314-macosx_11_0_arm64.whl", hash = "sha256:1d1d9764366c73f996edd17abb6d9d7649a7eb690006ab6adbda117717099b14", size = 1891725, upload-time = "2025-11-04T13:40:58.807Z" },
+    { url = "https://files.pythonhosted.org/packages/23/04/e89c29e267b8060b40dca97bfc64a19b2a3cf99018167ea1677d96368273/pydantic_core-2.41.5-cp314-cp314-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:25e1c2af0fce638d5f1988b686f3b3ea8cd7de5f244ca147c777769e798a9cd1", size = 1915040, upload-time = "2025-11-04T13:41:00.853Z" },
+    { url = "https://files.pythonhosted.org/packages/84/a3/15a82ac7bd97992a82257f777b3583d3e84bdb06ba6858f745daa2ec8a85/pydantic_core-2.41.5-cp314-cp314-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:506d766a8727beef16b7adaeb8ee6217c64fc813646b424d0804d67c16eddb66", size = 2063691, upload-time = "2025-11-04T13:41:03.504Z" },
+    { url = "https://files.pythonhosted.org/packages/74/9b/0046701313c6ef08c0c1cf0e028c67c770a4e1275ca73131563c5f2a310a/pydantic_core-2.41.5-cp314-cp314-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:4819fa52133c9aa3c387b3328f25c1facc356491e6135b459f1de698ff64d869", size = 2213897, upload-time = "2025-11-04T13:41:05.804Z" },
+    { url = "https://files.pythonhosted.org/packages/8a/cd/6bac76ecd1b27e75a95ca3a9a559c643b3afcd2dd62086d4b7a32a18b169/pydantic_core-2.41.5-cp314-cp314-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:2b761d210c9ea91feda40d25b4efe82a1707da2ef62901466a42492c028553a2", size = 2333302, upload-time = "2025-11-04T13:41:07.809Z" },
+    { url = "https://files.pythonhosted.org/packages/4c/d2/ef2074dc020dd6e109611a8be4449b98cd25e1b9b8a303c2f0fca2f2bcf7/pydantic_core-2.41.5-cp314-cp314-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:22f0fb8c1c583a3b6f24df2470833b40207e907b90c928cc8d3594b76f874375", size = 2064877, upload-time = "2025-11-04T13:41:09.827Z" },
+    { url = "https://files.pythonhosted.org/packages/18/66/e9db17a9a763d72f03de903883c057b2592c09509ccfe468187f2a2eef29/pydantic_core-2.41.5-cp314-cp314-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:2782c870e99878c634505236d81e5443092fba820f0373997ff75f90f68cd553", size = 2180680, upload-time = "2025-11-04T13:41:12.379Z" },
+    { url = "https://files.pythonhosted.org/packages/d3/9e/3ce66cebb929f3ced22be85d4c2399b8e85b622db77dad36b73c5387f8f8/pydantic_core-2.41.5-cp314-cp314-musllinux_1_1_aarch64.whl", hash = "sha256:0177272f88ab8312479336e1d777f6b124537d47f2123f89cb37e0accea97f90", size = 2138960, upload-time = "2025-11-04T13:41:14.627Z" },
+    { url = "https://files.pythonhosted.org/packages/a6/62/205a998f4327d2079326b01abee48e502ea739d174f0a89295c481a2272e/pydantic_core-2.41.5-cp314-cp314-musllinux_1_1_armv7l.whl", hash = "sha256:63510af5e38f8955b8ee5687740d6ebf7c2a0886d15a6d65c32814613681bc07", size = 2339102, upload-time = "2025-11-04T13:41:16.868Z" },
+    { url = "https://files.pythonhosted.org/packages/3c/0d/f05e79471e889d74d3d88f5bd20d0ed189ad94c2423d81ff8d0000aab4ff/pydantic_core-2.41.5-cp314-cp314-musllinux_1_1_x86_64.whl", hash = "sha256:e56ba91f47764cc14f1daacd723e3e82d1a89d783f0f5afe9c364b8bb491ccdb", size = 2326039, upload-time = "2025-11-04T13:41:18.934Z" },
+    { url = "https://files.pythonhosted.org/packages/ec/e1/e08a6208bb100da7e0c4b288eed624a703f4d129bde2da475721a80cab32/pydantic_core-2.41.5-cp314-cp314-win32.whl", hash = "sha256:aec5cf2fd867b4ff45b9959f8b20ea3993fc93e63c7363fe6851424c8a7e7c23", size = 1995126, upload-time = "2025-11-04T13:41:21.418Z" },
+    { url = "https://files.pythonhosted.org/packages/48/5d/56ba7b24e9557f99c9237e29f5c09913c81eeb2f3217e40e922353668092/pydantic_core-2.41.5-cp314-cp314-win_amd64.whl", hash = "sha256:8e7c86f27c585ef37c35e56a96363ab8de4e549a95512445b85c96d3e2f7c1bf", size = 2015489, upload-time = "2025-11-04T13:41:24.076Z" },
+    { url = "https://files.pythonhosted.org/packages/4e/bb/f7a190991ec9e3e0ba22e4993d8755bbc4a32925c0b5b42775c03e8148f9/pydantic_core-2.41.5-cp314-cp314-win_arm64.whl", hash = "sha256:e672ba74fbc2dc8eea59fb6d4aed6845e6905fc2a8afe93175d94a83ba2a01a0", size = 1977288, upload-time = "2025-11-04T13:41:26.33Z" },
+    { url = "https://files.pythonhosted.org/packages/92/ed/77542d0c51538e32e15afe7899d79efce4b81eee631d99850edc2f5e9349/pydantic_core-2.41.5-cp314-cp314t-macosx_10_12_x86_64.whl", hash = "sha256:8566def80554c3faa0e65ac30ab0932b9e3a5cd7f8323764303d468e5c37595a", size = 2120255, upload-time = "2025-11-04T13:41:28.569Z" },
+    { url = "https://files.pythonhosted.org/packages/bb/3d/6913dde84d5be21e284439676168b28d8bbba5600d838b9dca99de0fad71/pydantic_core-2.41.5-cp314-cp314t-macosx_11_0_arm64.whl", hash = "sha256:b80aa5095cd3109962a298ce14110ae16b8c1aece8b72f9dafe81cf597ad80b3", size = 1863760, upload-time = "2025-11-04T13:41:31.055Z" },
+    { url = "https://files.pythonhosted.org/packages/5a/f0/e5e6b99d4191da102f2b0eb9687aaa7f5bea5d9964071a84effc3e40f997/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_17_aarch64.manylinux2014_aarch64.whl", hash = "sha256:3006c3dd9ba34b0c094c544c6006cc79e87d8612999f1a5d43b769b89181f23c", size = 1878092, upload-time = "2025-11-04T13:41:33.21Z" },
+    { url = "https://files.pythonhosted.org/packages/71/48/36fb760642d568925953bcc8116455513d6e34c4beaa37544118c36aba6d/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_17_armv7l.manylinux2014_armv7l.whl", hash = "sha256:72f6c8b11857a856bcfa48c86f5368439f74453563f951e473514579d44aa612", size = 2053385, upload-time = "2025-11-04T13:41:35.508Z" },
+    { url = "https://files.pythonhosted.org/packages/20/25/92dc684dd8eb75a234bc1c764b4210cf2646479d54b47bf46061657292a8/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_17_ppc64le.manylinux2014_ppc64le.whl", hash = "sha256:5cb1b2f9742240e4bb26b652a5aeb840aa4b417c7748b6f8387927bc6e45e40d", size = 2218832, upload-time = "2025-11-04T13:41:37.732Z" },
+    { url = "https://files.pythonhosted.org/packages/e2/09/f53e0b05023d3e30357d82eb35835d0f6340ca344720a4599cd663dca599/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_17_s390x.manylinux2014_s390x.whl", hash = "sha256:bd3d54f38609ff308209bd43acea66061494157703364ae40c951f83ba99a1a9", size = 2327585, upload-time = "2025-11-04T13:41:40Z" },
+    { url = "https://files.pythonhosted.org/packages/aa/4e/2ae1aa85d6af35a39b236b1b1641de73f5a6ac4d5a7509f77b814885760c/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_17_x86_64.manylinux2014_x86_64.whl", hash = "sha256:2ff4321e56e879ee8d2a879501c8e469414d948f4aba74a2d4593184eb326660", size = 2041078, upload-time = "2025-11-04T13:41:42.323Z" },
+    { url = "https://files.pythonhosted.org/packages/cd/13/2e215f17f0ef326fc72afe94776edb77525142c693767fc347ed6288728d/pydantic_core-2.41.5-cp314-cp314t-manylinux_2_5_i686.manylinux1_i686.whl", hash = "sha256:d0d2568a8c11bf8225044aa94409e21da0cb09dcdafe9ecd10250b2baad531a9", size = 2173914, upload-time = "2025-11-04T13:41:45.221Z" },
+    { url = "https://files.pythonhosted.org/packages/02/7a/f999a6dcbcd0e5660bc348a3991c8915ce6599f4f2c6ac22f01d7a10816c/pydantic_core-2.41.5-cp314-cp314t-musllinux_1_1_aarch64.whl", hash = "sha256:a39455728aabd58ceabb03c90e12f71fd30fa69615760a075b9fec596456ccc3", size = 2129560, upload-time = "2025-11-04T13:41:47.474Z" },
+    { url = "https://files.pythonhosted.org/packages/3a/b1/6c990ac65e3b4c079a4fb9f5b05f5b013afa0f4ed6780a3dd236d2cbdc64/pydantic_core-2.41.5-cp314-cp314t-musllinux_1_1_armv7l.whl", hash = "sha256:239edca560d05757817c13dc17c50766136d21f7cd0fac50295499ae24f90fdf", size = 2329244, upload-time = "2025-11-04T13:41:49.992Z" },
+    { url = "https://files.pythonhosted.org/packages/d9/02/3c562f3a51afd4d88fff8dffb1771b30cfdfd79befd9883ee094f5b6c0d8/pydantic_core-2.41.5-cp314-cp314t-musllinux_1_1_x86_64.whl", hash = "sha256:2a5e06546e19f24c6a96a129142a75cee553cc018ffee48a460059b1185f4470", size = 2331955, upload-time = "2025-11-04T13:41:54.079Z" },
+    { url = "https://files.pythonhosted.org/packages/5c/96/5fb7d8c3c17bc8c62fdb031c47d77a1af698f1d7a406b0f79aaa1338f9ad/pydantic_core-2.41.5-cp314-cp314t-win32.whl", hash = "sha256:b4ececa40ac28afa90871c2cc2b9ffd2ff0bf749380fbdf57d165fd23da353aa", size = 1988906, upload-time = "2025-11-04T13:41:56.606Z" },
+    { url = "https://files.pythonhosted.org/packages/22/ed/182129d83032702912c2e2d8bbe33c036f342cc735737064668585dac28f/pydantic_core-2.41.5-cp314-cp314t-win_amd64.whl", hash = "sha256:80aa89cad80b32a912a65332f64a4450ed00966111b6615ca6816153d3585a8c", size = 1981607, upload-time = "2025-11-04T13:41:58.889Z" },
+    { url = "https://files.pythonhosted.org/packages/9f/ed/068e41660b832bb0b1aa5b58011dea2a3fe0ba7861ff38c4d4904c1c1a99/pydantic_core-2.41.5-cp314-cp314t-win_arm64.whl", hash = "sha256:35b44f37a3199f771c3eaa53051bc8a70cd7b54f333531c59e29fd4db5d15008", size = 1974769, upload-time = "2025-11-04T13:42:01.186Z" },
+]
+
+[[package]]
+name = "pymupdf"
+version = "1.26.6"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/ec/d7/a6f0e03a117fa2ad79c4b898203bb212b17804f92558a6a339298faca7bb/pymupdf-1.26.6.tar.gz", hash = "sha256:a2b4531cd4ab36d6f1f794bb6d3c33b49bda22f36d58bb1f3e81cbc10183bd2b", size = 84322494, upload-time = "2025-11-05T15:20:46.786Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/9e/5c/dec354eee5fe4966c715f33818ed4193e0e6c986cf8484de35b6c167fb8e/pymupdf-1.26.6-cp310-abi3-macosx_10_9_x86_64.whl", hash = "sha256:e46f320a136ad55e5219e8f0f4061bdf3e4c12b126d2740d5a49f73fae7ea176", size = 23178988, upload-time = "2025-11-05T14:31:19.834Z" },
+    { url = "https://files.pythonhosted.org/packages/ec/a0/11adb742d18142bd623556cd3b5d64649816decc5eafd30efc9498657e76/pymupdf-1.26.6-cp310-abi3-macosx_11_0_arm64.whl", hash = "sha256:6844cd2396553c0fa06de4869d5d5ecb1260e6fc3b9d85abe8fa35f14dd9d688", size = 22469764, upload-time = "2025-11-05T14:32:34.654Z" },
+    { url = "https://files.pythonhosted.org/packages/e4/c8/377cf20e31f58d4c243bfcf2d3cb7466d5b97003b10b9f1161f11eb4a994/pymupdf-1.26.6-cp310-abi3-manylinux_2_28_aarch64.whl", hash = "sha256:617ba69e02c44f0da1c0e039ea4a26cf630849fd570e169c71daeb8ac52a81d6", size = 23502227, upload-time = "2025-11-06T11:03:56.934Z" },
+    { url = "https://files.pythonhosted.org/packages/4f/bf/6e02e3d84b32c137c71a0a3dcdba8f2f6e9950619a3bc272245c7c06a051/pymupdf-1.26.6-cp310-abi3-manylinux_2_28_x86_64.whl", hash = "sha256:7777d0b7124c2ebc94849536b6a1fb85d158df3b9d873935e63036559391534c", size = 24115381, upload-time = "2025-11-05T14:33:54.338Z" },
+    { url = "https://files.pythonhosted.org/packages/ab/9d/30f7fcb3776bfedde66c06297960debe4883b1667294a1ee9426c942e94d/pymupdf-1.26.6-cp310-abi3-win32.whl", hash = "sha256:8f3ef05befc90ca6bb0f12983200a7048d5bff3e1c1edef1bb3de60b32cb5274", size = 17203613, upload-time = "2025-11-05T17:19:47.494Z" },
+    { url = "https://files.pythonhosted.org/packages/f9/e8/989f4eaa369c7166dc24f0eaa3023f13788c40ff1b96701f7047421554a8/pymupdf-1.26.6-cp310-abi3-win_amd64.whl", hash = "sha256:ce02ca96ed0d1acfd00331a4d41a34c98584d034155b06fd4ec0f051718de7ba", size = 18405680, upload-time = "2025-11-05T14:34:48.672Z" },
+]
+
+[[package]]
+name = "rubicon-objc"
+version = "0.5.2"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/a7/2f/612049b8601e810080f63f4b85acbf2ed0784349088d3c944eb288e1d487/rubicon_objc-0.5.2.tar.gz", hash = "sha256:1180593935f6a8a39c23b5f4b7baa24aedf9f7285e80804a1d9d6b50a50572f5", size = 175710, upload-time = "2025-08-07T06:12:25.194Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/9f/a4/11ad29100060af56408ed084dca76a16d2ce8eb31b75081bfc0eec45d755/rubicon_objc-0.5.2-py3-none-any.whl", hash = "sha256:829b253c579e51fc34f4bb6587c34806e78960dcc1eb24e62b38141a1fe02b39", size = 63512, upload-time = "2025-08-07T06:12:23.766Z" },
+]
+
+[[package]]
+name = "sniffio"
+version = "1.3.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/a2/87/a6771e1546d97e7e041b6ae58d80074f81b7d5121207425c964ddf5cfdbd/sniffio-1.3.1.tar.gz", hash = "sha256:f4324edc670a0f49750a81b895f35c3adb843cca46f0530f79fc1babb23789dc", size = 20372, upload-time = "2024-02-25T23:20:04.057Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/e9/44/75a9c9421471a6c4805dbf2356f7c181a29c1879239abab1ea2cc8f38b40/sniffio-1.3.1-py3-none-any.whl", hash = "sha256:2f6da418d1f1e0fddd844478f41680e794e6051915791a034ff65e5f100525a2", size = 10235, upload-time = "2024-02-25T23:20:01.196Z" },
+]
+
+[[package]]
+name = "tqdm"
+version = "4.67.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "colorama", marker = "sys_platform == 'win32'" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/a8/4b/29b4ef32e036bb34e4ab51796dd745cdba7ed47ad142a9f4a1eb8e0c744d/tqdm-4.67.1.tar.gz", hash = "sha256:f8aef9c52c08c13a65f30ea34f4e5aac3fd1a34959879d7e59e63027286627f2", size = 169737, upload-time = "2024-11-24T20:12:22.481Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/d0/30/dc54f88dd4a2b5dc8a0279bdd7270e735851848b762aeb1c1184ed1f6b14/tqdm-4.67.1-py3-none-any.whl", hash = "sha256:26445eca388f82e72884e0d580d5464cd801a3ea01e63e5601bdff9ba6a48de2", size = 78540, upload-time = "2024-11-24T20:12:19.698Z" },
+]
+
+[[package]]
+name = "typing-extensions"
+version = "4.15.0"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/72/94/1a15dd82efb362ac84269196e94cf00f187f7ed21c242792a923cdb1c61f/typing_extensions-4.15.0.tar.gz", hash = "sha256:0cea48d173cc12fa28ecabc3b837ea3cf6f38c6d1136f85cbaaf598984861466", size = 109391, upload-time = "2025-08-25T13:49:26.313Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/18/67/36e9267722cc04a6b9f15c7f3441c2363321a3ea07da7ae0c0707beb2a9c/typing_extensions-4.15.0-py3-none-any.whl", hash = "sha256:f0fa19c6845758ab08074a0cfa8b7aecb71c999ca73d62883bc25cc018c4e548", size = 44614, upload-time = "2025-08-25T13:49:24.86Z" },
+]
+
+[[package]]
+name = "typing-inspection"
+version = "0.4.2"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "typing-extensions" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/55/e3/70399cb7dd41c10ac53367ae42139cf4b1ca5f36bb3dc6c9d33acdb43655/typing_inspection-0.4.2.tar.gz", hash = "sha256:ba561c48a67c5958007083d386c3295464928b01faa735ab8547c5692e87f464", size = 75949, upload-time = "2025-10-01T02:14:41.687Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/dc/9b/47798a6c91d8bdb567fe2698fe81e0c6b7cb7ef4d13da4114b41d239f65d/typing_inspection-0.4.2-py3-none-any.whl", hash = "sha256:4ed1cacbdc298c220f1bd249ed5287caa16f34d44ef4e9c3d0cbad5b521545e7", size = 14611, upload-time = "2025-10-01T02:14:40.154Z" },
+]
+
+[[package]]
+name = "winrt-runtime"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "typing-extensions" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/16/dd/acdd527c1d890c8f852cc2af644aa6c160974e66631289420aa871b05e65/winrt_runtime-3.2.1.tar.gz", hash = "sha256:c8dca19e12b234ae6c3dadf1a4d0761b51e708457492c13beb666556958801ea", size = 21721, upload-time = "2025-06-06T14:40:27.593Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/79/d4/1a555d8bdcb8b920f8e896232c82901cc0cda6d3e4f92842199ae7dff70a/winrt_runtime-3.2.1-cp313-cp313-win32.whl", hash = "sha256:44e2733bc709b76c554aee6c7fe079443b8306b2e661e82eecfebe8b9d71e4d1", size = 210022, upload-time = "2025-06-06T06:44:11.767Z" },
+    { url = "https://files.pythonhosted.org/packages/aa/24/2b6e536ca7745d788dfd17a2ec376fa03a8c7116dc638bb39b035635484f/winrt_runtime-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:3c1fdcaeedeb2920dc3b9039db64089a6093cad2be56a3e64acc938849245a6d", size = 241349, upload-time = "2025-06-06T06:44:12.661Z" },
+    { url = "https://files.pythonhosted.org/packages/d4/7f/6d72973279e2929b2a71ed94198ad4a5d63ee2936e91a11860bf7b431410/winrt_runtime-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:28f3dab083412625ff4d2b46e81246932e6bebddf67bea7f05e01712f54e6159", size = 415126, upload-time = "2025-06-06T06:44:13.702Z" },
+    { url = "https://files.pythonhosted.org/packages/c8/87/88bd98419a9da77a68e030593fee41702925a7ad8a8aec366945258cbb31/winrt_runtime-3.2.1-cp314-cp314-win32.whl", hash = "sha256:9b6298375468ac2f6815d0c008a059fc16508c8f587e824c7936ed9216480dad", size = 210257, upload-time = "2025-09-20T07:06:41.054Z" },
+    { url = "https://files.pythonhosted.org/packages/87/85/e5c2a10d287edd9d3ee8dc24bf7d7f335636b92bf47119768b7dd2fd1669/winrt_runtime-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:e36e587ab5fd681ee472cd9a5995743f75107a1a84d749c64f7e490bc86bc814", size = 241873, upload-time = "2025-09-20T07:06:42.059Z" },
+    { url = "https://files.pythonhosted.org/packages/52/2a/eb9e78397132175f70dd51dfa4f93e489c17d6b313ae9dce60369b8d84a7/winrt_runtime-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:35d6241a2ebd5598e4788e69768b8890ee1eee401a819865767a1fbdd3e9a650", size = 416222, upload-time = "2025-09-20T07:06:43.376Z" },
+]
+
+[[package]]
+name = "winrt-windows-applicationmodel-core"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "winrt-runtime" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/24/0d/3ae880680ba3da0fe062f7a4785b955bab331ae45fd8941c7be55e12e005/winrt_windows_applicationmodel_core-3.2.1.tar.gz", hash = "sha256:7cd21a4a7e25b099703a607f17ce804b5166cdf6444437440590fafea990fb46", size = 13656, upload-time = "2025-06-06T14:40:46.98Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/b7/a3/9665e9a31764d1b3c33f156c004c41367fd8c982ab9c7fb3d8a37b3d61a4/winrt_windows_applicationmodel_core-3.2.1-cp313-cp313-win32.whl", hash = "sha256:806adb41eace8f2e131c41f1d8b192269d661fe6cc061559385384d05851d5d7", size = 68046, upload-time = "2025-06-06T06:49:45.031Z" },
+    { url = "https://files.pythonhosted.org/packages/56/15/ee5cb5e8d79c46e500961af8323a4b565d51ffaae569d78ab382d387f466/winrt_windows_applicationmodel_core-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:4ff4ed0a24c793bf34ef4c56410f9f862d76bfd01757f78a475145cf0879032d", size = 70165, upload-time = "2025-06-06T06:49:46.16Z" },
+    { url = "https://files.pythonhosted.org/packages/bc/da/32237d4cefa045ff472f2103635eaa94cfc374128ac1e9811fd339fcafcb/winrt_windows_applicationmodel_core-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:a61390e9cc257cd67b8ecedee82ecbed7cf04b3c2371f1380608146709656f31", size = 67274, upload-time = "2025-06-06T06:49:46.974Z" },
+    { url = "https://files.pythonhosted.org/packages/fe/9e/b5449887abdd369be490291227c5a2d3829dea37f83326f58506eaff1447/winrt_windows_applicationmodel_core-3.2.1-cp314-cp314-win32.whl", hash = "sha256:2a940b018989ba7159ace4c93eab5f5bce303ac5325ab29eeb0effe1d4a486a7", size = 70241, upload-time = "2025-09-20T07:07:48.648Z" },
+    { url = "https://files.pythonhosted.org/packages/3b/78/17352b0dba22ede5103554dec637fd419c1e1d54078b09a73fdcd8678cec/winrt_windows_applicationmodel_core-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:52f2e1cd5fa0a5b0592ddc40b423255491a40a2d6e4cf6ae766dd3b4810557ec", size = 71994, upload-time = "2025-09-20T07:07:49.707Z" },
+    { url = "https://files.pythonhosted.org/packages/fa/f6/cb6ae65cfabfc527aea0d702c2cfcaf58859813e38172fffc66d5dd845f5/winrt_windows_applicationmodel_core-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:a0c18662c835fbb5044a5c3ca021d8f2f3f290c6238543ed74112a18e3d7d878", size = 70084, upload-time = "2025-09-20T07:07:50.466Z" },
+]
+
+[[package]]
+name = "winrt-windows-data-xml-dom"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "winrt-runtime" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/cc/11/6b1e59abf5f8f0cba1fee13447c9d077d144332b9b664bb236fdfa878558/winrt_windows_data_xml_dom-3.2.1.tar.gz", hash = "sha256:db81f5956bf63ce8c9d8bfb6d0794ab2849f26e62a6256b833af8de3d6451399", size = 50032, upload-time = "2025-06-06T14:41:15.877Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/ad/3f/682185135537c99629663935155c2332bc500553a2f6aad134deadd2c2d3/winrt_windows_data_xml_dom-3.2.1-cp313-cp313-win32.whl", hash = "sha256:7091ee8d472a18336887edee6bf90d9261783f82b1a0fec00ba0e6a1a00623eb", size = 158825, upload-time = "2025-06-06T06:58:57.484Z" },
+    { url = "https://files.pythonhosted.org/packages/e6/02/89057b180a2dda10af0ae8a256180e7f6ec8f688b547501a89a36c72c4e4/winrt_windows_data_xml_dom-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:b51b67c0bf88995827151d4e8ff0edcb2120406d4aedcb9574854b904b92a11f", size = 186818, upload-time = "2025-06-06T06:58:58.368Z" },
+    { url = "https://files.pythonhosted.org/packages/e5/aa/9894e19b34275307e4857ea3ada1d230bcdc7e399ce0ae504c6309c7e55d/winrt_windows_data_xml_dom-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:e4ed27ec593b96bcd13fffd9fd0bf74744b0dacc249faa5af0ef1d903ed59c1b", size = 160670, upload-time = "2025-06-06T06:58:59.225Z" },
+    { url = "https://files.pythonhosted.org/packages/a2/e1/22556c7dd4d777c35a270d776a87c4de7e8316d91b51888816e565d4f1f0/winrt_windows_data_xml_dom-3.2.1-cp314-cp314-win32.whl", hash = "sha256:77258030a725a32359fd2a93855cafa0e3f3f38e67afd5dfe74a8a215cbb31c4", size = 160792, upload-time = "2025-09-20T07:09:36.528Z" },
+    { url = "https://files.pythonhosted.org/packages/ab/d2/3a4b7e38feafdec21cb044e0c1ee2c76a71cfbda02bfedcc50634e9fb652/winrt_windows_data_xml_dom-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:1cf1b6f31fff4e4c0ae30f1643b169da72b3b053a2996010f2c3a1e26b5d4970", size = 189170, upload-time = "2025-09-20T07:09:37.441Z" },
+    { url = "https://files.pythonhosted.org/packages/45/cc/9d301892e9a640a63ac56f565d38d5897002598e18acdfbd4ed168836ab3/winrt_windows_data_xml_dom-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:6de83f853d889444e4897413c2fa8183f86aa602edd34abf36a4fdc69db1650e", size = 169804, upload-time = "2025-09-20T07:09:38.448Z" },
+]
+
+[[package]]
+name = "winrt-windows-foundation"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "winrt-runtime" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/0c/55/098ce7ea0679efcc1298b269c48768f010b6c68f90c588f654ec874c8a74/winrt_windows_foundation-3.2.1.tar.gz", hash = "sha256:ad2f1fcaa6c34672df45527d7c533731fdf65b67c4638c2b4aca949f6eec0656", size = 30485, upload-time = "2025-06-06T14:41:53.344Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/7b/71/5e87131e4aecc8546c76b9e190bfe4e1292d028bda3f9dd03b005d19c76c/winrt_windows_foundation-3.2.1-cp313-cp313-win32.whl", hash = "sha256:3998dc58ed50ecbdbabace1cdef3a12920b725e32a5806d648ad3f4829d5ba46", size = 112184, upload-time = "2025-06-06T07:11:04.459Z" },
+    { url = "https://files.pythonhosted.org/packages/ba/7f/8d5108461351d4f6017f550af8874e90c14007f9122fa2eab9f9e0e9b4e1/winrt_windows_foundation-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:6e98617c1e46665c7a56ce3f5d28e252798416d1ebfee3201267a644a4e3c479", size = 118672, upload-time = "2025-06-06T07:11:05.55Z" },
+    { url = "https://files.pythonhosted.org/packages/44/f5/2edf70922a3d03500dab17121b90d368979bd30016f6dbca0d043f0c71f1/winrt_windows_foundation-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:2a8c1204db5c352f6a563130a5a41d25b887aff7897bb677d4ff0b660315aad4", size = 109673, upload-time = "2025-06-06T07:11:06.398Z" },
+    { url = "https://files.pythonhosted.org/packages/e3/0a/d77346e39fe0c81f718cde49f83fe77c368c0e14c6418f72dfa1e7ef22d0/winrt_windows_foundation-3.2.1-cp314-cp314-win32.whl", hash = "sha256:35e973ab3c77c2a943e139302256c040e017fd6ff1a75911c102964603bba1da", size = 114590, upload-time = "2025-09-20T07:11:49.97Z" },
+    { url = "https://files.pythonhosted.org/packages/a1/56/4d2b545bea0f34f68df6d4d4ca22950ff8a935497811dccdc0ca58737a05/winrt_windows_foundation-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:a22a7ebcec0d262e60119cff728f32962a02df60471ded8b2735a655eccc0ef5", size = 122148, upload-time = "2025-09-20T07:11:50.826Z" },
+    { url = "https://files.pythonhosted.org/packages/ed/ed/b9d3a11cac73444c0a3703200161cd7267dab5ab85fd00e1f965526e74a8/winrt_windows_foundation-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:3be7fbae829b98a6a946db4fbaf356b11db1fbcbb5d4f37e7a73ac6b25de8b87", size = 114360, upload-time = "2025-09-20T07:11:51.626Z" },
+]
+
+[[package]]
+name = "winrt-windows-foundation-collections"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "winrt-runtime" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/ef/62/d21e3f1eeb8d47077887bbf0c3882c49277a84d8f98f7c12bda64d498a07/winrt_windows_foundation_collections-3.2.1.tar.gz", hash = "sha256:0eff1ad0d8d763ad17e9e7bbd0c26a62b27215016393c05b09b046d6503ae6d5", size = 16043, upload-time = "2025-06-06T14:41:53.983Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/a6/cd/99ef050d80bea2922fa1ded93e5c250732634095d8bd3595dd808083e5ca/winrt_windows_foundation_collections-3.2.1-cp313-cp313-win32.whl", hash = "sha256:4267a711b63476d36d39227883aeb3fb19ac92b88a9fc9973e66fbce1fd4aed9", size = 60063, upload-time = "2025-06-06T07:11:18.65Z" },
+    { url = "https://files.pythonhosted.org/packages/94/93/4f75fd6a4c96f1e9bee198c5dc9a9b57e87a9c38117e1b5e423401886353/winrt_windows_foundation_collections-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:5e12a6e75036ee90484c33e204b85fb6785fcc9e7c8066ad65097301f48cdd10", size = 69057, upload-time = "2025-06-06T07:11:19.446Z" },
+    { url = "https://files.pythonhosted.org/packages/40/76/de47ccc390017ec5575e7e7fd9f659ee3747c52049cdb2969b1b538ce947/winrt_windows_foundation_collections-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:34b556255562f1b36d07fba933c2bcd9f0db167fa96727a6cbb4717b152ad7a2", size = 58792, upload-time = "2025-06-06T07:11:20.24Z" },
+    { url = "https://files.pythonhosted.org/packages/e1/47/b3301d964422d4611c181348149a7c5956a2a76e6339de451a000d4ae8e7/winrt_windows_foundation_collections-3.2.1-cp314-cp314-win32.whl", hash = "sha256:33188ed2d63e844c8adfbb82d1d3d461d64aaf78d225ce9c5930421b413c45ab", size = 62211, upload-time = "2025-09-20T07:11:52.411Z" },
+    { url = "https://files.pythonhosted.org/packages/20/59/5f2c940ff606297129e93ebd6030c813e6a43a786de7fc33ccb268e0b06b/winrt_windows_foundation_collections-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:d4cfece7e9c0ead2941e55a1da82f20d2b9c8003bb7a8853bb7f999b539f80a4", size = 70399, upload-time = "2025-09-20T07:11:53.254Z" },
+    { url = "https://files.pythonhosted.org/packages/f8/2d/2c8eb89062c71d4be73d618457ed68e7e2ba29a660ac26349d44fc121cbf/winrt_windows_foundation_collections-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:3884146fea13727510458f6a14040b7632d5d90127028b9bfd503c6c655d0c01", size = 61392, upload-time = "2025-09-20T07:11:53.993Z" },
+]
+
+[[package]]
+name = "winrt-windows-ui-notifications"
+version = "3.2.1"
+source = { registry = "https://pypi.org/simple" }
+dependencies = [
+    { name = "winrt-runtime" },
+]
+sdist = { url = "https://files.pythonhosted.org/packages/fc/f9/4798657fd6999e6dae2c84876b40e91873ccd5f056b27c40ebd7f4ff11d8/winrt_windows_ui_notifications-3.2.1.tar.gz", hash = "sha256:eb29bf1c3306f3ceabd71d092b5505d5fe73fbc0660347dcc63ebc4204d34d21", size = 28942, upload-time = "2025-06-06T14:43:54.629Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/ab/34/eee24f0ff5522ff3d9c91c983c706fc2a06ed78a5aa84dd9b9fe51125b78/winrt_windows_ui_notifications-3.2.1-cp313-cp313-win32.whl", hash = "sha256:cff07f0193365c38a07cf87030c609b57b7ca7fcbf8740c720425edfa6205fa8", size = 154502, upload-time = "2025-06-06T14:11:52.135Z" },
+    { url = "https://files.pythonhosted.org/packages/14/7c/8163639827003c411787d6f6f682e543206ecb47abd29291d184006b5834/winrt_windows_ui_notifications-3.2.1-cp313-cp313-win_amd64.whl", hash = "sha256:9f8d109c8c6634dac258a32d7f3d939aa50605bd7a6a43137a3ffc2ab4a8f667", size = 165795, upload-time = "2025-06-06T14:11:53.004Z" },
+    { url = "https://files.pythonhosted.org/packages/0d/10/89012eeb14b932eb3f0ac541d8788d794e09f8fe1934fdae1760d0cbd252/winrt_windows_ui_notifications-3.2.1-cp313-cp313-win_arm64.whl", hash = "sha256:aec78f6a632e2ae57a55b7aee60f8df848ccffd1c4d14c3c9fbfaa6bb564e1a2", size = 155184, upload-time = "2025-06-06T14:11:53.863Z" },
+    { url = "https://files.pythonhosted.org/packages/68/43/c81672457002908b8c0f1e4672db1d0b8885c2894c6768fe9b0162af9ee5/winrt_windows_ui_notifications-3.2.1-cp314-cp314-win32.whl", hash = "sha256:00a7579ca0870134c27def1418c259fb18efe5b88aa399de85b4712f1add1b55", size = 157561, upload-time = "2025-09-20T07:19:10.162Z" },
+    { url = "https://files.pythonhosted.org/packages/17/d8/910a58698d722120f2401c3bfeb6018361d92f3b2814caae839f54693305/winrt_windows_ui_notifications-3.2.1-cp314-cp314-win_amd64.whl", hash = "sha256:943599c727abf710ae94644b1d521e11857bd568e080e894a8be11aa717e383a", size = 170152, upload-time = "2025-09-20T07:19:11.05Z" },
+    { url = "https://files.pythonhosted.org/packages/b5/a3/1db0f2ec28a4eadd0876c0ac3a3d78514027c5afe35737b164e03c98b234/winrt_windows_ui_notifications-3.2.1-cp314-cp314-win_arm64.whl", hash = "sha256:2a496c7e796b537966df7b26753b20bc40c5c1fbe96b3b3051a1debc00b80f07", size = 163245, upload-time = "2025-09-20T07:19:12.352Z" },
+]
+
+[[package]]
+name = "wrapt"
+version = "2.0.1"
+source = { registry = "https://pypi.org/simple" }
+sdist = { url = "https://files.pythonhosted.org/packages/49/2a/6de8a50cb435b7f42c46126cf1a54b2aab81784e74c8595c8e025e8f36d3/wrapt-2.0.1.tar.gz", hash = "sha256:9c9c635e78497cacb81e84f8b11b23e0aacac7a136e73b8e5b2109a1d9fc468f", size = 82040, upload-time = "2025-11-07T00:45:33.312Z" }
+wheels = [
+    { url = "https://files.pythonhosted.org/packages/ad/fe/41af4c46b5e498c90fc87981ab2972fbd9f0bccda597adb99d3d3441b94b/wrapt-2.0.1-cp313-cp313-macosx_10_13_universal2.whl", hash = "sha256:47b0f8bafe90f7736151f61482c583c86b0693d80f075a58701dd1549b0010a9", size = 78132, upload-time = "2025-11-07T00:44:04.628Z" },
+    { url = "https://files.pythonhosted.org/packages/1c/92/d68895a984a5ebbbfb175512b0c0aad872354a4a2484fbd5552e9f275316/wrapt-2.0.1-cp313-cp313-macosx_10_13_x86_64.whl", hash = "sha256:cbeb0971e13b4bd81d34169ed57a6dda017328d1a22b62fda45e1d21dd06148f", size = 61211, upload-time = "2025-11-07T00:44:05.626Z" },
+    { url = "https://files.pythonhosted.org/packages/e8/26/ba83dc5ae7cf5aa2b02364a3d9cf74374b86169906a1f3ade9a2d03cf21c/wrapt-2.0.1-cp313-cp313-macosx_11_0_arm64.whl", hash = "sha256:eb7cffe572ad0a141a7886a1d2efa5bef0bf7fe021deeea76b3ab334d2c38218", size = 61689, upload-time = "2025-11-07T00:44:06.719Z" },
+    { url = "https://files.pythonhosted.org/packages/cf/67/d7a7c276d874e5d26738c22444d466a3a64ed541f6ef35f740dbd865bab4/wrapt-2.0.1-cp313-cp313-manylinux1_x86_64.manylinux_2_28_x86_64.manylinux_2_5_x86_64.whl", hash = "sha256:c8d60527d1ecfc131426b10d93ab5d53e08a09c5fa0175f6b21b3252080c70a9", size = 121502, upload-time = "2025-11-07T00:44:09.557Z" },
+    { url = "https://files.pythonhosted.org/packages/0f/6b/806dbf6dd9579556aab22fc92908a876636e250f063f71548a8660382184/wrapt-2.0.1-cp313-cp313-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:c654eafb01afac55246053d67a4b9a984a3567c3808bb7df2f8de1c1caba2e1c", size = 123110, upload-time = "2025-11-07T00:44:10.64Z" },
+    { url = "https://files.pythonhosted.org/packages/e5/08/cdbb965fbe4c02c5233d185d070cabed2ecc1f1e47662854f95d77613f57/wrapt-2.0.1-cp313-cp313-manylinux_2_31_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:98d873ed6c8b4ee2418f7afce666751854d6d03e3c0ec2a399bb039cd2ae89db", size = 117434, upload-time = "2025-11-07T00:44:08.138Z" },
+    { url = "https://files.pythonhosted.org/packages/2d/d1/6aae2ce39db4cb5216302fa2e9577ad74424dfbe315bd6669725569e048c/wrapt-2.0.1-cp313-cp313-musllinux_1_2_aarch64.whl", hash = "sha256:c9e850f5b7fc67af856ff054c71690d54fa940c3ef74209ad9f935b4f66a0233", size = 121533, upload-time = "2025-11-07T00:44:12.142Z" },
+    { url = "https://files.pythonhosted.org/packages/79/35/565abf57559fbe0a9155c29879ff43ce8bd28d2ca61033a3a3dd67b70794/wrapt-2.0.1-cp313-cp313-musllinux_1_2_riscv64.whl", hash = "sha256:e505629359cb5f751e16e30cf3f91a1d3ddb4552480c205947da415d597f7ac2", size = 116324, upload-time = "2025-11-07T00:44:13.28Z" },
+    { url = "https://files.pythonhosted.org/packages/e1/e0/53ff5e76587822ee33e560ad55876d858e384158272cd9947abdd4ad42ca/wrapt-2.0.1-cp313-cp313-musllinux_1_2_x86_64.whl", hash = "sha256:2879af909312d0baf35f08edeea918ee3af7ab57c37fe47cb6a373c9f2749c7b", size = 120627, upload-time = "2025-11-07T00:44:14.431Z" },
+    { url = "https://files.pythonhosted.org/packages/7c/7b/38df30fd629fbd7612c407643c63e80e1c60bcc982e30ceeae163a9800e7/wrapt-2.0.1-cp313-cp313-win32.whl", hash = "sha256:d67956c676be5a24102c7407a71f4126d30de2a569a1c7871c9f3cabc94225d7", size = 58252, upload-time = "2025-11-07T00:44:17.814Z" },
+    { url = "https://files.pythonhosted.org/packages/85/64/d3954e836ea67c4d3ad5285e5c8fd9d362fd0a189a2db622df457b0f4f6a/wrapt-2.0.1-cp313-cp313-win_amd64.whl", hash = "sha256:9ca66b38dd642bf90c59b6738af8070747b610115a39af2498535f62b5cdc1c3", size = 60500, upload-time = "2025-11-07T00:44:15.561Z" },
+    { url = "https://files.pythonhosted.org/packages/89/4e/3c8b99ac93527cfab7f116089db120fef16aac96e5f6cdb724ddf286086d/wrapt-2.0.1-cp313-cp313-win_arm64.whl", hash = "sha256:5a4939eae35db6b6cec8e7aa0e833dcca0acad8231672c26c2a9ab7a0f8ac9c8", size = 58993, upload-time = "2025-11-07T00:44:16.65Z" },
+    { url = "https://files.pythonhosted.org/packages/f9/f4/eff2b7d711cae20d220780b9300faa05558660afb93f2ff5db61fe725b9a/wrapt-2.0.1-cp313-cp313t-macosx_10_13_universal2.whl", hash = "sha256:a52f93d95c8d38fed0669da2ebdb0b0376e895d84596a976c15a9eb45e3eccb3", size = 82028, upload-time = "2025-11-07T00:44:18.944Z" },
+    { url = "https://files.pythonhosted.org/packages/0c/67/cb945563f66fd0f61a999339460d950f4735c69f18f0a87ca586319b1778/wrapt-2.0.1-cp313-cp313t-macosx_10_13_x86_64.whl", hash = "sha256:4e54bbf554ee29fcceee24fa41c4d091398b911da6e7f5d7bffda963c9aed2e1", size = 62949, upload-time = "2025-11-07T00:44:20.074Z" },
+    { url = "https://files.pythonhosted.org/packages/ec/ca/f63e177f0bbe1e5cf5e8d9b74a286537cd709724384ff20860f8f6065904/wrapt-2.0.1-cp313-cp313t-macosx_11_0_arm64.whl", hash = "sha256:908f8c6c71557f4deaa280f55d0728c3bca0960e8c3dd5ceeeafb3c19942719d", size = 63681, upload-time = "2025-11-07T00:44:21.345Z" },
+    { url = "https://files.pythonhosted.org/packages/39/a1/1b88fcd21fd835dca48b556daef750952e917a2794fa20c025489e2e1f0f/wrapt-2.0.1-cp313-cp313t-manylinux1_x86_64.manylinux_2_28_x86_64.manylinux_2_5_x86_64.whl", hash = "sha256:e2f84e9af2060e3904a32cea9bb6db23ce3f91cfd90c6b426757cf7cc01c45c7", size = 152696, upload-time = "2025-11-07T00:44:24.318Z" },
+    { url = "https://files.pythonhosted.org/packages/62/1c/d9185500c1960d9f5f77b9c0b890b7fc62282b53af7ad1b6bd779157f714/wrapt-2.0.1-cp313-cp313t-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:e3612dc06b436968dfb9142c62e5dfa9eb5924f91120b3c8ff501ad878f90eb3", size = 158859, upload-time = "2025-11-07T00:44:25.494Z" },
+    { url = "https://files.pythonhosted.org/packages/91/60/5d796ed0f481ec003220c7878a1d6894652efe089853a208ea0838c13086/wrapt-2.0.1-cp313-cp313t-manylinux_2_31_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:6d2d947d266d99a1477cd005b23cbd09465276e302515e122df56bb9511aca1b", size = 146068, upload-time = "2025-11-07T00:44:22.81Z" },
+    { url = "https://files.pythonhosted.org/packages/04/f8/75282dd72f102ddbfba137e1e15ecba47b40acff32c08ae97edbf53f469e/wrapt-2.0.1-cp313-cp313t-musllinux_1_2_aarch64.whl", hash = "sha256:7d539241e87b650cbc4c3ac9f32c8d1ac8a54e510f6dca3f6ab60dcfd48c9b10", size = 155724, upload-time = "2025-11-07T00:44:26.634Z" },
+    { url = "https://files.pythonhosted.org/packages/5a/27/fe39c51d1b344caebb4a6a9372157bdb8d25b194b3561b52c8ffc40ac7d1/wrapt-2.0.1-cp313-cp313t-musllinux_1_2_riscv64.whl", hash = "sha256:4811e15d88ee62dbf5c77f2c3ff3932b1e3ac92323ba3912f51fc4016ce81ecf", size = 144413, upload-time = "2025-11-07T00:44:27.939Z" },
+    { url = "https://files.pythonhosted.org/packages/83/2b/9f6b643fe39d4505c7bf926d7c2595b7cb4b607c8c6b500e56c6b36ac238/wrapt-2.0.1-cp313-cp313t-musllinux_1_2_x86_64.whl", hash = "sha256:c1c91405fcf1d501fa5d55df21e58ea49e6b879ae829f1039faaf7e5e509b41e", size = 150325, upload-time = "2025-11-07T00:44:29.29Z" },
+    { url = "https://files.pythonhosted.org/packages/bb/b6/20ffcf2558596a7f58a2e69c89597128781f0b88e124bf5a4cadc05b8139/wrapt-2.0.1-cp313-cp313t-win32.whl", hash = "sha256:e76e3f91f864e89db8b8d2a8311d57df93f01ad6bb1e9b9976d1f2e83e18315c", size = 59943, upload-time = "2025-11-07T00:44:33.211Z" },
+    { url = "https://files.pythonhosted.org/packages/87/6a/0e56111cbb3320151eed5d3821ee1373be13e05b376ea0870711f18810c3/wrapt-2.0.1-cp313-cp313t-win_amd64.whl", hash = "sha256:83ce30937f0ba0d28818807b303a412440c4b63e39d3d8fc036a94764b728c92", size = 63240, upload-time = "2025-11-07T00:44:30.935Z" },
+    { url = "https://files.pythonhosted.org/packages/1d/54/5ab4c53ea1f7f7e5c3e7c1095db92932cc32fd62359d285486d00c2884c3/wrapt-2.0.1-cp313-cp313t-win_arm64.whl", hash = "sha256:4b55cacc57e1dc2d0991dbe74c6419ffd415fb66474a02335cb10efd1aa3f84f", size = 60416, upload-time = "2025-11-07T00:44:32.002Z" },
+    { url = "https://files.pythonhosted.org/packages/73/81/d08d83c102709258e7730d3cd25befd114c60e43ef3891d7e6877971c514/wrapt-2.0.1-cp314-cp314-macosx_10_13_universal2.whl", hash = "sha256:5e53b428f65ece6d9dad23cb87e64506392b720a0b45076c05354d27a13351a1", size = 78290, upload-time = "2025-11-07T00:44:34.691Z" },
+    { url = "https://files.pythonhosted.org/packages/f6/14/393afba2abb65677f313aa680ff0981e829626fed39b6a7e3ec807487790/wrapt-2.0.1-cp314-cp314-macosx_10_13_x86_64.whl", hash = "sha256:ad3ee9d0f254851c71780966eb417ef8e72117155cff04821ab9b60549694a55", size = 61255, upload-time = "2025-11-07T00:44:35.762Z" },
+    { url = "https://files.pythonhosted.org/packages/c4/10/a4a1f2fba205a9462e36e708ba37e5ac95f4987a0f1f8fd23f0bf1fc3b0f/wrapt-2.0.1-cp314-cp314-macosx_11_0_arm64.whl", hash = "sha256:d7b822c61ed04ee6ad64bc90d13368ad6eb094db54883b5dde2182f67a7f22c0", size = 61797, upload-time = "2025-11-07T00:44:37.22Z" },
+    { url = "https://files.pythonhosted.org/packages/12/db/99ba5c37cf1c4fad35349174f1e38bd8d992340afc1ff27f526729b98986/wrapt-2.0.1-cp314-cp314-manylinux1_x86_64.manylinux_2_28_x86_64.manylinux_2_5_x86_64.whl", hash = "sha256:7164a55f5e83a9a0b031d3ffab4d4e36bbec42e7025db560f225489fa929e509", size = 120470, upload-time = "2025-11-07T00:44:39.425Z" },
+    { url = "https://files.pythonhosted.org/packages/30/3f/a1c8d2411eb826d695fc3395a431757331582907a0ec59afce8fe8712473/wrapt-2.0.1-cp314-cp314-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:e60690ba71a57424c8d9ff28f8d006b7ad7772c22a4af432188572cd7fa004a1", size = 122851, upload-time = "2025-11-07T00:44:40.582Z" },
+    { url = "https://files.pythonhosted.org/packages/b3/8d/72c74a63f201768d6a04a8845c7976f86be6f5ff4d74996c272cefc8dafc/wrapt-2.0.1-cp314-cp314-manylinux_2_31_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:3cd1a4bd9a7a619922a8557e1318232e7269b5fb69d4ba97b04d20450a6bf970", size = 117433, upload-time = "2025-11-07T00:44:38.313Z" },
+    { url = "https://files.pythonhosted.org/packages/c7/5a/df37cf4042cb13b08256f8e27023e2f9b3d471d553376616591bb99bcb31/wrapt-2.0.1-cp314-cp314-musllinux_1_2_aarch64.whl", hash = "sha256:b4c2e3d777e38e913b8ce3a6257af72fb608f86a1df471cb1d4339755d0a807c", size = 121280, upload-time = "2025-11-07T00:44:41.69Z" },
+    { url = "https://files.pythonhosted.org/packages/54/34/40d6bc89349f9931e1186ceb3e5fbd61d307fef814f09fbbac98ada6a0c8/wrapt-2.0.1-cp314-cp314-musllinux_1_2_riscv64.whl", hash = "sha256:3d366aa598d69416b5afedf1faa539fac40c1d80a42f6b236c88c73a3c8f2d41", size = 116343, upload-time = "2025-11-07T00:44:43.013Z" },
+    { url = "https://files.pythonhosted.org/packages/70/66/81c3461adece09d20781dee17c2366fdf0cb8754738b521d221ca056d596/wrapt-2.0.1-cp314-cp314-musllinux_1_2_x86_64.whl", hash = "sha256:c235095d6d090aa903f1db61f892fffb779c1eaeb2a50e566b52001f7a0f66ed", size = 119650, upload-time = "2025-11-07T00:44:44.523Z" },
+    { url = "https://files.pythonhosted.org/packages/46/3a/d0146db8be8761a9e388cc9cc1c312b36d583950ec91696f19bbbb44af5a/wrapt-2.0.1-cp314-cp314-win32.whl", hash = "sha256:bfb5539005259f8127ea9c885bdc231978c06b7a980e63a8a61c8c4c979719d0", size = 58701, upload-time = "2025-11-07T00:44:48.277Z" },
+    { url = "https://files.pythonhosted.org/packages/1a/38/5359da9af7d64554be63e9046164bd4d8ff289a2dd365677d25ba3342c08/wrapt-2.0.1-cp314-cp314-win_amd64.whl", hash = "sha256:4ae879acc449caa9ed43fc36ba08392b9412ee67941748d31d94e3cedb36628c", size = 60947, upload-time = "2025-11-07T00:44:46.086Z" },
+    { url = "https://files.pythonhosted.org/packages/aa/3f/96db0619276a833842bf36343685fa04f987dd6e3037f314531a1e00492b/wrapt-2.0.1-cp314-cp314-win_arm64.whl", hash = "sha256:8639b843c9efd84675f1e100ed9e99538ebea7297b62c4b45a7042edb84db03e", size = 59359, upload-time = "2025-11-07T00:44:47.164Z" },
+    { url = "https://files.pythonhosted.org/packages/71/49/5f5d1e867bf2064bf3933bc6cf36ade23505f3902390e175e392173d36a2/wrapt-2.0.1-cp314-cp314t-macosx_10_13_universal2.whl", hash = "sha256:9219a1d946a9b32bb23ccae66bdb61e35c62773ce7ca6509ceea70f344656b7b", size = 82031, upload-time = "2025-11-07T00:44:49.4Z" },
+    { url = "https://files.pythonhosted.org/packages/2b/89/0009a218d88db66ceb83921e5685e820e2c61b59bbbb1324ba65342668bc/wrapt-2.0.1-cp314-cp314t-macosx_10_13_x86_64.whl", hash = "sha256:fa4184e74197af3adad3c889a1af95b53bb0466bced92ea99a0c014e48323eec", size = 62952, upload-time = "2025-11-07T00:44:50.74Z" },
+    { url = "https://files.pythonhosted.org/packages/ae/18/9b968e920dd05d6e44bcc918a046d02afea0fb31b2f1c80ee4020f377cbe/wrapt-2.0.1-cp314-cp314t-macosx_11_0_arm64.whl", hash = "sha256:c5ef2f2b8a53b7caee2f797ef166a390fef73979b15778a4a153e4b5fedce8fa", size = 63688, upload-time = "2025-11-07T00:44:52.248Z" },
+    { url = "https://files.pythonhosted.org/packages/a6/7d/78bdcb75826725885d9ea26c49a03071b10c4c92da93edda612910f150e4/wrapt-2.0.1-cp314-cp314t-manylinux1_x86_64.manylinux_2_28_x86_64.manylinux_2_5_x86_64.whl", hash = "sha256:e042d653a4745be832d5aa190ff80ee4f02c34b21f4b785745eceacd0907b815", size = 152706, upload-time = "2025-11-07T00:44:54.613Z" },
+    { url = "https://files.pythonhosted.org/packages/dd/77/cac1d46f47d32084a703df0d2d29d47e7eb2a7d19fa5cbca0e529ef57659/wrapt-2.0.1-cp314-cp314t-manylinux2014_aarch64.manylinux_2_17_aarch64.manylinux_2_28_aarch64.whl", hash = "sha256:2afa23318136709c4b23d87d543b425c399887b4057936cd20386d5b1422b6fa", size = 158866, upload-time = "2025-11-07T00:44:55.79Z" },
+    { url = "https://files.pythonhosted.org/packages/8a/11/b521406daa2421508903bf8d5e8b929216ec2af04839db31c0a2c525eee0/wrapt-2.0.1-cp314-cp314t-manylinux_2_31_riscv64.manylinux_2_39_riscv64.whl", hash = "sha256:6c72328f668cf4c503ffcf9434c2b71fdd624345ced7941bc6693e61bbe36bef", size = 146148, upload-time = "2025-11-07T00:44:53.388Z" },
+    { url = "https://files.pythonhosted.org/packages/0c/c0/340b272bed297baa7c9ce0c98ef7017d9c035a17a6a71dce3184b8382da2/wrapt-2.0.1-cp314-cp314t-musllinux_1_2_aarch64.whl", hash = "sha256:3793ac154afb0e5b45d1233cb94d354ef7a983708cc3bb12563853b1d8d53747", size = 155737, upload-time = "2025-11-07T00:44:56.971Z" },
+    { url = "https://files.pythonhosted.org/packages/f3/93/bfcb1fb2bdf186e9c2883a4d1ab45ab099c79cbf8f4e70ea453811fa3ea7/wrapt-2.0.1-cp314-cp314t-musllinux_1_2_riscv64.whl", hash = "sha256:fec0d993ecba3991645b4857837277469c8cc4c554a7e24d064d1ca291cfb81f", size = 144451, upload-time = "2025-11-07T00:44:58.515Z" },
+    { url = "https://files.pythonhosted.org/packages/d2/6b/dca504fb18d971139d232652656180e3bd57120e1193d9a5899c3c0b7cdd/wrapt-2.0.1-cp314-cp314t-musllinux_1_2_x86_64.whl", hash = "sha256:949520bccc1fa227274da7d03bf238be15389cd94e32e4297b92337df9b7a349", size = 150353, upload-time = "2025-11-07T00:44:59.753Z" },
+    { url = "https://files.pythonhosted.org/packages/1d/f6/a1de4bd3653afdf91d250ca5c721ee51195df2b61a4603d4b373aa804d1d/wrapt-2.0.1-cp314-cp314t-win32.whl", hash = "sha256:be9e84e91d6497ba62594158d3d31ec0486c60055c49179edc51ee43d095f79c", size = 60609, upload-time = "2025-11-07T00:45:03.315Z" },
+    { url = "https://files.pythonhosted.org/packages/01/3a/07cd60a9d26fe73efead61c7830af975dfdba8537632d410462672e4432b/wrapt-2.0.1-cp314-cp314t-win_amd64.whl", hash = "sha256:61c4956171c7434634401db448371277d07032a81cc21c599c22953374781395", size = 64038, upload-time = "2025-11-07T00:45:00.948Z" },
+    { url = "https://files.pythonhosted.org/packages/41/99/8a06b8e17dddbf321325ae4eb12465804120f699cd1b8a355718300c62da/wrapt-2.0.1-cp314-cp314t-win_arm64.whl", hash = "sha256:35cdbd478607036fee40273be8ed54a451f5f23121bd9d4be515158f9498f7ad", size = 60634, upload-time = "2025-11-07T00:45:02.087Z" },
+    { url = "https://files.pythonhosted.org/packages/15/d1/b51471c11592ff9c012bd3e2f7334a6ff2f42a7aed2caffcf0bdddc9cb89/wrapt-2.0.1-py3-none-any.whl", hash = "sha256:4d2ce1bf1a48c5277d7969259232b57645aae5686dba1eaeade39442277afbca", size = 44046, upload-time = "2025-11-07T00:45:32.116Z" },
+]
diff --git a/modules/programs/proton-x/default.nix b/modules/programs/proton-x/default.nix
new file mode 100644
index 00000000..ffe3f35a
--- /dev/null
+++ b/modules/programs/proton-x/default.nix
@@ -0,0 +1,26 @@
+{
+  delib,
+  inputs,
+  # system,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+in
+  delib.module {
+    name = "programs.proton-x";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [
+        pkgs.protonmail-desktop
+        pkgs.proton-pass
+
+        inputs.proton-authenticator.packages."${pkgs.stdenv.hostPlatform.system}".default
+      ];
+    };
+    darwin.ifEnabled = {
+      # macOS packages can be added when needed
+    };
+  }
diff --git a/modules/programs/pull-jj/pull-jj.nix b/modules/programs/pull-jj/pull-jj.nix
new file mode 100644
index 00000000..06b6452e
--- /dev/null
+++ b/modules/programs/pull-jj/pull-jj.nix
@@ -0,0 +1,29 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellScriptBin "pull-jj" ''
+    jj git fetch
+    jj rebase -d main
+  '';
+in
+  delib.module {
+    name = "programs.pull-jj";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = [
+        program
+      ];
+    };
+
+    darwin.ifEnabled = {myconfig, ...}: {
+      environment.systemPackages = [
+        program
+      ];
+    };
+  }
diff --git a/modules/programs/xlaude/default.nix b/modules/programs/xlaude/default.nix
new file mode 100644
index 00000000..cc47d3aa
--- /dev/null
+++ b/modules/programs/xlaude/default.nix
@@ -0,0 +1,34 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "xlaude";
+    text = builtins.readFile ./xlaude.sh;
+    excludeShellChecks = [
+      "SC2068"
+      "SC2155"
+    ];
+    runtimeEnv = {
+      "ANTHROPIC_DEFAULT_HAIKU_MODEL" = "grok-code-fast-1";
+      "ANTHROPIC_DEFAULT_SONNET_MODEL" = "grok-code-fast-1";
+      "ANTHROPIC_DEFAULT_OPUS_MODEL" = "grok-code-fast-1";
+    };
+  };
+in
+  delib.module {
+    name = "programs.xlaude";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/xlaude/xlaude.sh b/modules/programs/xlaude/xlaude.sh
new file mode 100755
index 00000000..64ff41a4
--- /dev/null
+++ b/modules/programs/xlaude/xlaude.sh
@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+export ANTHROPIC_BASE_URL=https://api.x.ai
+export ANTHROPIC_AUTH_TOKEN=$(grep '^XAI_API_KEY=' ~/dotfiles/.env | cut -d '=' -f 2)
+
+claude $@
diff --git a/modules/programs/zlaude/default.nix b/modules/programs/zlaude/default.nix
new file mode 100644
index 00000000..2b4e2bda
--- /dev/null
+++ b/modules/programs/zlaude/default.nix
@@ -0,0 +1,34 @@
+{
+  delib,
+  pkgs,
+  ...
+}: let
+  inherit (delib) singleEnableOption;
+
+  program = pkgs.writeShellApplication {
+    name = "zlaude";
+    text = builtins.readFile ./zlaude.sh;
+    excludeShellChecks = [
+      "SC2068"
+      "SC2155"
+    ];
+    runtimeEnv = {
+      "ANTHROPIC_DEFAULT_HAIKU_MODEL" = "glm-4.6";
+      "ANTHROPIC_DEFAULT_SONNET_MODEL" = "glm-4.6";
+      "ANTHROPIC_DEFAULT_OPUS_MODEL" = "glm-4.6";
+    };
+  };
+in
+  delib.module {
+    name = "programs.zlaude";
+
+    options = singleEnableOption false;
+
+    nixos.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+
+    darwin.ifEnabled = {
+      environment.systemPackages = [program];
+    };
+  }
diff --git a/modules/programs/zlaude/zlaude.sh b/modules/programs/zlaude/zlaude.sh
new file mode 100755
index 00000000..bfbed948
--- /dev/null
+++ b/modules/programs/zlaude/zlaude.sh
@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+export ANTHROPIC_BASE_URL=https://api.z.ai/api/anthropic
+export ANTHROPIC_AUTH_TOKEN=$(grep '^ZAI_API_KEY=' ~/dotfiles/.env | cut -d '=' -f 2)
+
+claude $@
diff --git a/modules/shared/default.nix b/modules/shared/default.nix
deleted file mode 100644
index 63060e73..00000000
--- a/modules/shared/default.nix
+++ /dev/null
@@ -1,221 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  # lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  # namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  system, # The system architecture for this host (eg. `x86_64-linux`).
-  # target, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  # format, # A normalized name for the system target (eg. `iso`).
-  # virtual, # A boolean to determine whether this system is a virtual target using nixos-generators.
-  # systems, # An attribute map of your defined hosts.
-  # # All other arguments come from the module system.
-  # config,
-  ...
-}: let
-  unstable-pkgs = import inputs.nixpkgs-unstable {
-    inherit system;
-    config = {
-    };
-  };
-in {
-  programs = {
-    zsh.enable = true;
-
-    direnv.enable = true;
-    direnv.nix-direnv.enable = true;
-  };
-
-  environment.variables = {
-    EDITOR = "nvim";
-    SHELL = "zsh";
-    GTK_THEME = "adw-gtk3-dark";
-  };
-
-  environment.systemPackages = with pkgs; [
-    unstable-pkgs.doppler
-    git
-    git-lfs
-    cloc
-    gnumake
-    cmake
-    stow
-    pkgs.home-manager
-    age
-    # Apps
-    obsidian
-    neovim
-    emacs
-    zed-editor
-    vscode
-    gtkwave
-    inputs.zen-browser.packages."${system}".default
-
-    # Shell
-    zsh
-    zinit
-    starship
-    devenv
-    pkgs.direnv
-    pkgs.nix-direnv
-    bat
-    fd
-    jq
-    yq
-    delta
-    cachix
-    fzf
-    nerdfonts
-    zellij
-    gh
-    atuin
-    zoxide
-    gum
-    bat
-    eza
-    delta
-    unzip
-    htop
-    nixos-generators
-    tealdeer
-    sleek
-    chafa
-    tree-sitter
-
-    wireguard-tools
-    wireguard-ui
-
-    nh
-    rippkgs
-    update-nix-fetchgit
-
-    dnsutils
-
-    sad
-    gcc
-    llvm
-    nodejs
-    stow
-    nvc
-    uv
-    ripgrep
-    meson
-    sqlite
-    sqlite-vec
-    unstable-pkgs.ollama
-    jetbrains.datagrip
-    pkg-config
-    spicetify-cli
-
-    # Platforms
-    turso-cli
-    flyctl
-
-    # Languages
-    nodejs
-    ruby
-    rustup
-    zig
-    python312
-    (python312.withPackages (
-      ps:
-        with ps; [
-          numpy
-          requests
-          pandas
-          scipy
-          matplotlib
-          scikitlearn
-          torch
-          opencv4
-          torchvision
-          selenium
-          pyarrow
-          psycopg
-          mysqlclient
-          ollama
-          black
-          requests
-          uvicorn
-          flask
-          fastapi
-          django
-          gunicorn
-          pydantic
-          mypy
-          torchdiffeq
-          beautifulsoup4
-          pillow
-          gym
-          pypdf
-          pytest
-          pip
-          sympy
-        ]
-    ))
-
-    # Language Servers
-
-    ## Nix
-    nixd
-    nil
-    statix
-    nix-index
-    nix-prefetch-git
-
-    ## Lua
-    lua-language-server
-
-    ## JSON
-    jq-lsp
-
-    ## HTMX
-    htmx-lsp
-    tailwindcss
-
-    ## Latex
-    texlab
-    ltex-ls
-
-    ## Bash
-    shellcheck
-
-    ## Python
-    unstable-pkgs.basedpyright
-
-    ## Yaml
-    yaml-language-server
-    actionlint
-
-    ## Hyprland
-    hyprls
-
-    ## Sql
-    sqls
-
-    vscode-langservers-extracted
-    luajitPackages.luarocks
-    wget
-    pfetch-rs
-    matugen
-    # Formatters
-    hclfmt
-    shfmt
-    rustfmt
-    black
-    tree
-    alejandra
-    cbfmt
-    marksman
-    sops
-
-    # Debuggers
-    delve
-  ];
-
-  # Your configuration.
-}
diff --git a/packages/zen-browser/flake.nix b/packages/zen-browser/flake.nix
deleted file mode 100644
index ef5b74a0..00000000
--- a/packages/zen-browser/flake.nix
+++ /dev/null
@@ -1,176 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  lib,
-  # You also have access to your flake's inputs.
-  inputs,
-  # The namespace used for your flake, defaulting to "internal" if not set.
-  namespace,
-  # All other arguments come from NixPkgs. You can use `pkgs` to pull packages or helpers
-  # programmatically or you may add the named attributes as arguments here.
-  pkgs,
-  stdenv,
-  ...
-}: let
-  baseUrl = "https://github.com/zen-browser/desktop/releases/download";
-  pname = "zen-browser";
-  description = "Zen Browser: Experience tranquillity while browsing the web without people tracking you!";
-  supportedSystems = ["x86_64-linux" "x86_64-darwin" "aarch64-darwin" "aarch64-linux"];
-  forAllSystems = inputs.nixpkgs.lib.genAttrs supportedSystems;
-  version = "1.0.2-b.5";
-  downloadUrl = {
-    "x86_64-linux" = {
-      url = "${baseUrl}/${version}/zen.linux-x86_64.tar.bz2";
-      sha256 = "sha256:1xp0z86l7z661cwckgr623gwwjsy3h66900xqjq6dvgx5a3njbxi";
-    };
-    "aarch64-linux" = {
-      url = "${baseUrl}/${version}/zen.linux-aarch64.tar.bz2";
-      sha256 = "sha256:1dm7la05ym41my837iyh469ccyxzf776v26hh1q835h17i3r5qcy";
-    };
-    "aarch64-darwin" = {
-      url = "${baseUrl}/${version}/zen.macos-aarch64.dmg";
-      sha256 = "sha256:0xdc7g6ksirmrq4vmdrvk4l09sk63psdqr9dqqc9dx51gyf47g0a";
-    };
-    "x86_64-darwin" = {
-      url = "${baseUrl}/${version}/zen.macos-x86_64.dmg";
-      sha256 = "sha256:0kk7wq90xd4ccd7kkjw64ckrvwwc6wbfa51r9w99q0l3fmzzjya3";
-    };
-  };
-
-  pkgsForSystem = system: import inputs.nixpkgs {inherit system;};
-
-  linuxRuntimeLibs = pkgs:
-    with pkgs;
-      [
-        libGL
-        libGLU
-        libevent
-        libffi
-        libjpeg
-        libpng
-        libstartup_notification
-        libvpx
-        libwebp
-        stdenv.cc.cc
-        fontconfig
-        libxkbcommon
-        zlib
-        freetype
-        gtk3
-        libxml2
-        dbus
-        xcb-util-cursor
-        alsa-lib
-        libpulseaudio
-        pango
-        atk
-        cairo
-        gdk-pixbuf
-        glib
-        udev
-        libva
-        mesa
-        libnotify
-        cups
-        pciutils
-        ffmpeg
-        libglvnd
-        pipewire
-      ]
-      ++ (with pkgs.xorg; [
-        libxcb
-        libX11
-        libXcursor
-        libXrandr
-        libXi
-        libXext
-        libXcomposite
-        libXdamage
-        libXfixes
-        libXScrnSaver
-      ]);
-
-  mkZen = system: let
-    pkgs = pkgsForSystem system;
-    inherit (pkgs) stdenv;
-    inherit (stdenv) isDarwin;
-    downloadData = downloadUrl."${system}";
-  in
-    stdenv.mkDerivation {
-      inherit version pname description;
-
-      src =
-        if isDarwin
-        then
-          pkgs.fetchurl {
-            inherit (downloadData) url sha256;
-            name = "zen-${version}.dmg";
-          }
-        else
-          builtins.fetchTarball {
-            inherit (downloadData) url sha256;
-          };
-
-      desktopSrc = ./.;
-
-      phases =
-        if isDarwin
-        then ["unpackPhase" "installPhase"]
-        else ["installPhase" "fixupPhase"];
-
-      nativeBuildInputs = with pkgs;
-        [
-          makeWrapper
-          copyDesktopItems
-        ]
-        ++ (
-          if isDarwin
-          then [undmg]
-          else [wrapGAppsHook]
-        );
-
-      unpackPhase = pkgs.lib.optionalString isDarwin ''
-        undmg $src
-      '';
-
-      installPhase =
-        if isDarwin
-        then ''
-          mkdir -p $out/Applications
-          cp -r "Zen Browser.app" $out/Applications/
-        ''
-        else ''
-          mkdir -p $out/bin && cp -r $src/* $out/bin
-          install -D $desktopSrc/zen.desktop $out/share/applications/zen.desktop
-          install -D $src/browser/chrome/icons/default/default128.png $out/share/icons/hicolor/128x128/apps/zen.png
-        '';
-
-      fixupPhase = pkgs.lib.optionalString (!isDarwin) ''
-        chmod 755 $out/bin/*
-        patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" $out/bin/zen
-        wrapProgram $out/bin/zen --set LD_LIBRARY_PATH "${pkgs.lib.makeLibraryPath (linuxRuntimeLibs pkgs)}" \
-                        --set MOZ_LEGACY_PROFILES 1 --set MOZ_ALLOW_DOWNGRADE 1 --set MOZ_APP_LAUNCHER zen --prefix XDG_DATA_DIRS : "$GSETTINGS_SCHEMAS_PATH"
-        patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" $out/bin/zen-bin
-        wrapProgram $out/bin/zen-bin --set LD_LIBRARY_PATH "${pkgs.lib.makeLibraryPath (linuxRuntimeLibs pkgs)}" \
-                        --set MOZ_LEGACY_PROFILES 1 --set MOZ_ALLOW_DOWNGRADE 1 --set MOZ_APP_LAUNCHER zen --prefix XDG_DATA_DIRS : "$GSETTINGS_SCHEMAS_PATH"
-        patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" $out/bin/glxtest
-        wrapProgram $out/bin/glxtest --set LD_LIBRARY_PATH "${pkgs.lib.makeLibraryPath (linuxRuntimeLibs pkgs)}"
-        patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" $out/bin/updater
-        wrapProgram $out/bin/updater --set LD_LIBRARY_PATH "${pkgs.lib.makeLibraryPath (linuxRuntimeLibs pkgs)}"
-        patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" $out/bin/vaapitest
-        wrapProgram $out/bin/vaapitest --set LD_LIBRARY_PATH "${pkgs.lib.makeLibraryPath (linuxRuntimeLibs pkgs)}"
-      '';
-
-      meta = {
-        mainProgram =
-          if isDarwin
-          then null
-          else "zen";
-        platforms = [system];
-      };
-    };
-in {
-  packages = forAllSystems (system: {
-    default = mkZen system;
-  });
-}
diff --git a/packages/zen-browser/pyproject.toml b/packages/zen-browser/pyproject.toml
deleted file mode 100644
index cba60792..00000000
--- a/packages/zen-browser/pyproject.toml
+++ /dev/null
@@ -1,9 +0,0 @@
-[project]
-name = "zen-browser-flake"
-version = "0.1.0"
-description = "Add your description here"
-readme = "README.md"
-requires-python = ">=3.9"
-dependencies = [
-    "requests>=2.32.3",
-]
diff --git a/packages/zen-browser/update.py b/packages/zen-browser/update.py
deleted file mode 100644
index ccd50daa..00000000
--- a/packages/zen-browser/update.py
+++ /dev/null
@@ -1,134 +0,0 @@
-from typing import Any
-import requests
-import hashlib
-import tempfile
-import os
-
-
-def get_latest_release() -> Any:
-    """Fetch the latest release information from GitHub."""
-    url = "https://api.github.com/repos/zen-browser/desktop/releases/latest"
-    response = requests.get(url)
-    response.raise_for_status()
-    return response.json()
-
-
-def download_and_hash(url: str):
-    """Download a file and calculate its SHA256 hash using nix-prefetch-url."""
-    import subprocess
-
-    try:
-        print(f"\nHashing URL: {url}")
-        print("-" * 80)  # Separator line for better readability
-
-        cmd = []
-        if "dmg" in url:
-            cmd = ["nix-prefetch-url", url]
-        else:
-            cmd = ["nix-prefetch-url", "--type", "sha256", "--unpack", url]
-
-        result = subprocess.run(cmd, capture_output=True, text=True, check=True)
-
-        # Extract hash from stdout
-        hash_value = result.stdout.strip()
-
-        # Print detailed report
-        print(f"Status: Success")
-        print(f"Command: nix-prefetch-url --type sha256 --unpack {url}")
-        print(f"Hash value: {hash_value}")
-        print(f"Full output:\n{result.stdout}")
-        if result.stderr:
-            print(f"Stderr output:\n{result.stderr}")
-        print("-" * 80)  # Closing separator
-
-        return f"sha256:{hash_value}"
-    except subprocess.CalledProcessError as e:
-        error_msg = f"Failed to fetch and hash URL: {e.stderr}"
-        print(f"Status: Failed")
-        print(f"Error message: {error_msg}")
-        print("-" * 80)
-        raise Exception(error_msg)
-
-
-def update_version(content: str, version: str):
-    """Update version using the version tag."""
-    lines = content.split("\n")
-    for i, line in enumerate(lines):
-        if "#:version:" in line:
-            # Update the next line that contains 'version ='
-            for j in range(i + 1, len(lines)):
-                if "version =" in lines[j]:
-                    lines[j] = f'    version = "{version}";'
-                    break
-    return "\n".join(lines)
-
-
-def update_hash(content: str, platform: str, hash_value: str):
-    """Update hash for a specific platform using the sha256 tag."""
-    lines = content.split("\n")
-    in_platform_block = False
-
-    for i, line in enumerate(lines):
-        if f'"{platform}" = {{' in line:
-            in_platform_block = True
-        elif in_platform_block and "#:sha256:" in line:
-            # Update the next line that contains 'sha256 ='
-            for j in range(i + 1, len(lines)):
-                if "sha256 =" in lines[j]:
-                    lines[j] = f'        sha256 = "{hash_value}";'
-                    break
-            in_platform_block = False
-
-    return "\n".join(lines)
-
-
-def main():
-    try:
-        # Get latest release info
-        release = get_latest_release()
-        version = release["tag_name"]
-        print(f"Latest version: {version}")
-
-        # Platform mapping
-        platforms = {
-            "x86_64-linux": {"pattern": "linux-x86_64.tar.bz2"},
-            "aarch64-linux": {"pattern": "linux-aarch64.tar.bz2"},
-            "aarch64-darwin": {"pattern": "macos-aarch64.dmg"},
-            "x86_64-darwin": {"pattern": "macos-x86_64.dmg"},
-        }
-
-        # Read the current flake.nix
-        with open("flake.nix", "r") as f:
-            content = f.read()
-
-        # Update version
-        content = update_version(content, str(version))
-
-        # Calculate hashes and update each platform
-        for platform, info in platforms.items():
-            pattern = info["pattern"]
-            asset = next((a for a in release["assets"] if pattern in a["name"]), None)
-
-            if not asset:
-                print(f"Warning: No matching asset found for {platform}")
-                continue
-
-            print(f"Calculating hash for {platform}...")
-            hash_value = download_and_hash(asset["browser_download_url"])
-            content = update_hash(content, platform, hash_value)
-
-        # Write the updated content
-        with open("flake.nix", "w") as f:
-            _ = f.write(content)
-
-        print("\nFlake.nix has been updated successfully!")
-        print(f"New version: {version}")
-
-    except requests.exceptions.RequestException as e:
-        print(f"Error fetching data from GitHub: {e}")
-    except Exception as e:
-        print(f"An error occurred: {e}")
-
-
-if __name__ == "__main__":
-    main()
diff --git a/rices/dark/default.nix b/rices/dark/default.nix
new file mode 100644
index 00000000..026962a8
--- /dev/null
+++ b/rices/dark/default.nix
@@ -0,0 +1,54 @@
+{
+  delib,
+  inputs,
+  pkgs,
+  lib,
+  moduleSystem,
+  config,
+  ...
+}:
+delib.rice {
+  name = "dark";
+  home =
+    if pkgs.stdenv.isDarwin
+    then {
+    }
+    else {
+      stylix = {
+        enable = true;
+        base16Scheme = "${pkgs.base16-schemes}/share/themes/tokyodark.yaml";
+        image = ./../../assets/klaus-desktop.jpeg;
+      };
+      stylix = {
+        targets = {
+          dunst.enable = true;
+          zellij.enable = true;
+          fzf.enable = true;
+          k9s.enable = true;
+        };
+      };
+    };
+  nixos = {
+    stylix = {
+      enable = true;
+      base16Scheme = "${pkgs.base16-schemes}/share/themes/tokyodark.yaml";
+      image = ./../../assets/klaus-desktop.jpeg;
+      polarity = "dark";
+      cursor = {
+        size = 12;
+        name = "rose-pine-hyprcursor";
+        package = pkgs.rose-pine-hyprcursor;
+      };
+      targets = {
+        grub.enable = false;
+        qt.enable = false;
+        plymouth.enable = false;
+        gnome.enable = true;
+        gtk.enable = true;
+        spicetify.enable = true;
+        # KDE Plasma theming works via qt.enable above
+        # kde.enable and konsole.enable not available in current Stylix version
+      };
+    };
+  };
+}
diff --git a/rices/empty.nix b/rices/empty.nix
new file mode 100644
index 00000000..e7a59f10
--- /dev/null
+++ b/rices/empty.nix
@@ -0,0 +1,12 @@
+{
+  delib,
+  inputs,
+  pkgs,
+  moduleSystem,
+  ...
+}:
+delib.rice {
+  name = "empty";
+  home = {};
+  nixos = {};
+}
diff --git a/shell.nix b/shell.nix
new file mode 100644
index 00000000..c6801d77
--- /dev/null
+++ b/shell.nix
@@ -0,0 +1,12 @@
+(import
+  (
+    let
+      inherit ((builtins.fromJSON (builtins.readFile ./flake.lock)).nodes) flake-compat;
+    in
+      fetchTarball {
+        url = "https://github.com/edolstra/flake-compat/archive/${flake-compat.locked.rev}.tar.gz";
+        sha256 = flake-compat.locked.narHash;
+      }
+  )
+  {src = ./.;})
+.shellNix
diff --git a/spectr/AGENTS.md b/spectr/AGENTS.md
new file mode 100644
index 00000000..cc12c95a
--- /dev/null
+++ b/spectr/AGENTS.md
@@ -0,0 +1,456 @@
+# Spectr Instructions
+
+Instructions for AI coding assistants using Spectr for spec-driven development.
+
+## TL;DR Quick Checklist
+
+- Search existing work: `spectr spec list --long`, `spectr list` (use `rg` only for full-text search)
+- Decide scope: new capability vs modify existing capability
+- Pick a unique `change-id`: kebab-case, verb-led (`add-`, `update-`, `remove-`, `refactor-`)
+- Scaffold: `proposal.md`, `tasks.md`, `design.md` (only if needed), and delta specs per affected capability
+- Write deltas: use `## ADDED|MODIFIED|REMOVED|RENAMED Requirements`; include at least one `#### Scenario:` per requirement
+- Validate: `spectr validate [change-id] --strict` and fix issues
+- Request approval: Do not start implementation until proposal is approved
+
+## Three-Stage Workflow
+
+### Stage 1: Creating Changes
+Create proposal when you need to:
+- Add features or functionality
+- Make breaking changes (API, schema)
+- Change architecture or patterns
+- Optimize performance (changes behavior)
+- Update security patterns
+
+Triggers (examples):
+- "Help me create a change proposal"
+- "Help me plan a change"
+- "Help me create a proposal"
+- "I want to create a spec proposal"
+- "I want to create a spec"
+
+Loose matching guidance:
+- Contains one of: `proposal`, `change`, `spec`
+- With one of: `create`, `plan`, `make`, `start`, `help`
+
+Skip proposal for:
+- Bug fixes (restore intended behavior)
+- Typos, formatting, comments
+- Dependency updates (non-breaking)
+- Configuration changes
+- Tests for existing behavior
+
+**Workflow**
+1. Review `spectr/project.md`, `spectr list`, and `spectr list --specs` to understand current context.
+2. Choose a unique verb-led `change-id` and scaffold `proposal.md`, `tasks.md`, optional `design.md`, and spec deltas under `spectr/changes/<id>/`.
+3. Draft spec deltas using `## ADDED|MODIFIED|REMOVED Requirements` with at least one `#### Scenario:` per requirement.
+4. Run `spectr validate <id> --strict` and resolve any issues before sharing the proposal.
+
+### Stage 2: Implementing Changes
+Track these steps as TODOs and complete them one by one.
+1. **Read proposal.md** - Understand what's being built
+2. **Read design.md** (if exists) - Review technical decisions
+3. **Read tasks.md** - Get implementation checklist
+4. **Implement tasks sequentially** - Complete in order
+5. **Confirm completion** - Ensure every item in `tasks.md` is finished before updating statuses
+6. **Update checklist** - After all work is done, set every task to `- [x]` so the list reflects reality
+7. **Approval gate** - Do not start implementation until the proposal is reviewed and approved
+
+### Stage 3: Archiving Changes
+After deployment, create separate PR to:
+- Move `changes/[name]/` → `changes/archive/YYYY-MM-DD-[name]/`
+- Update `specs/` if capabilities changed
+- Use `spectr archive <change-id> --skip-specs --yes` for tooling-only changes (always pass the change ID explicitly)
+- Run `spectr validate --strict` to confirm the archived change passes checks
+
+## Before Any Task
+
+**Context Checklist:**
+- [ ] Read relevant specs in `specs/[capability]/spec.md`
+- [ ] Check pending changes in `changes/` for conflicts
+- [ ] Read `spectr/project.md` for conventions
+- [ ] Run `spectr list` to see active changes
+- [ ] Run `spectr list --specs` to see existing capabilities
+
+**Before Creating Specs:**
+- Always check if capability already exists
+- Prefer modifying existing specs over creating duplicates
+- Use `spectr show [spec]` to review current state
+- If request is ambiguous, ask 1–2 clarifying questions before scaffolding
+
+### Search Guidance
+- Enumerate specs: `spectr spec list --long` (or `--json` for scripts)
+- Enumerate changes: `spectr list` (or `spectr change list --json` - deprecated but available)
+- Show details:
+  - Spec: `spectr show <spec-id> --type spec` (use `--json` for filters)
+  - Change: `spectr show <change-id> --json --deltas-only`
+- Full-text search (use ripgrep): `rg -n "Requirement:|Scenario:" spectr/specs`
+
+## Quick Start
+
+### CLI Commands
+
+```bash
+# Essential commands
+spectr list                  # List active changes
+spectr list --specs          # List specifications
+spectr show [item]           # Display change or spec
+spectr validate [item]       # Validate changes or specs
+spectr archive <change-id> [--yes|-y]   # Archive after deployment (add --yes for non-interactive runs)
+
+# Project management
+spectr init [path]           # Initialize Spectr
+spectr update [path]         # Update instruction files
+
+# Interactive mode
+spectr show                  # Prompts for selection
+spectr validate              # Bulk validation mode
+
+# Debugging
+spectr show [change] --json --deltas-only
+spectr validate [change] --strict
+```
+
+### Command Flags
+
+- `--json` - Machine-readable output
+- `--type change|spec` - Disambiguate items
+- `--strict` - Comprehensive validation
+- `--no-interactive` - Disable prompts
+- `--skip-specs` - Archive without spec updates
+- `--yes`/`-y` - Skip confirmation prompts (non-interactive archive)
+
+## Directory Structure
+
+```
+spectr/
+├── project.md              # Project conventions
+├── specs/                  # Current truth - what IS built
+│   └── [capability]/       # Single focused capability
+│       ├── spec.md         # Requirements and scenarios
+│       └── design.md       # Technical patterns
+├── changes/                # Proposals - what SHOULD change
+│   ├── [change-name]/
+│   │   ├── proposal.md     # Why, what, impact
+│   │   ├── tasks.md        # Implementation checklist
+│   │   ├── design.md       # Technical decisions (optional; see criteria)
+│   │   └── specs/          # Delta changes
+│   │       └── [capability]/
+│   │           └── spec.md # ADDED/MODIFIED/REMOVED
+│   └── archive/            # Completed changes
+```
+
+## Creating Change Proposals
+
+### Decision Tree
+
+```
+New request?
+├─ Bug fix restoring spec behavior? → Fix directly
+├─ Typo/format/comment? → Fix directly
+├─ New feature/capability? → Create proposal
+├─ Breaking change? → Create proposal
+├─ Architecture change? → Create proposal
+└─ Unclear? → Create proposal (safer)
+```
+
+### Proposal Structure
+
+1. **Create directory:** `changes/[change-id]/` (kebab-case, verb-led, unique)
+
+2. **Write proposal.md:**
+```markdown
+# Change: [Brief description of change]
+
+## Why
+[1-2 sentences on problem/opportunity]
+
+## What Changes
+- [Bullet list of changes]
+- [Mark breaking changes with **BREAKING**]
+
+## Impact
+- Affected specs: [list capabilities]
+- Affected code: [key files/systems]
+```
+
+3. **Create spec deltas:** `specs/[capability]/spec.md`
+```markdown
+## ADDED Requirements
+### Requirement: New Feature
+The system SHALL provide...
+
+#### Scenario: Success case
+- **WHEN** user performs action
+- **THEN** expected result
+
+## MODIFIED Requirements
+### Requirement: Existing Feature
+[Complete modified requirement]
+
+## REMOVED Requirements
+### Requirement: Old Feature
+**Reason**: [Why removing]
+**Migration**: [How to handle]
+```
+If multiple capabilities are affected, create multiple delta files under `changes/[change-id]/specs/<capability>/spec.md`—one per capability.
+
+4. **Create tasks.md:**
+```markdown
+## 1. Implementation
+- [ ] 1.1 Create database schema
+- [ ] 1.2 Implement API endpoint
+- [ ] 1.3 Add frontend component
+- [ ] 1.4 Write tests
+```
+
+5. **Create design.md when needed:**
+Create `design.md` if any of the following apply; otherwise omit it:
+- Cross-cutting change (multiple services/modules) or a new architectural pattern
+- New external dependency or significant data model changes
+- Security, performance, or migration complexity
+- Ambiguity that benefits from technical decisions before coding
+
+Minimal `design.md` skeleton:
+```markdown
+## Context
+[Background, constraints, stakeholders]
+
+## Goals / Non-Goals
+- Goals: [...]
+- Non-Goals: [...]
+
+## Decisions
+- Decision: [What and why]
+- Alternatives considered: [Options + rationale]
+
+## Risks / Trade-offs
+- [Risk] → Mitigation
+
+## Migration Plan
+[Steps, rollback]
+
+## Open Questions
+- [...]
+```
+
+## Spec File Format
+
+### Critical: Scenario Formatting
+
+**CORRECT** (use #### headers):
+```markdown
+#### Scenario: User login success
+- **WHEN** valid credentials provided
+- **THEN** return JWT token
+```
+
+**WRONG** (don't use bullets or bold):
+```markdown
+- **Scenario: User login**  ❌
+**Scenario**: User login     ❌
+### Scenario: User login      ❌
+```
+
+Every requirement MUST have at least one scenario.
+
+### Requirement Wording
+- Use SHALL/MUST for normative requirements (avoid should/may unless intentionally non-normative)
+
+### Delta Operations
+
+- `## ADDED Requirements` - New capabilities
+- `## MODIFIED Requirements` - Changed behavior
+- `## REMOVED Requirements` - Deprecated features
+- `## RENAMED Requirements` - Name changes
+
+Headers matched with `trim(header)` - whitespace ignored.
+
+#### When to use ADDED vs MODIFIED
+- ADDED: Introduces a new capability or sub-capability that can stand alone as a requirement. Prefer ADDED when the change is orthogonal (e.g., adding "Slash Command Configuration") rather than altering the semantics of an existing requirement.
+- MODIFIED: Changes the behavior, scope, or acceptance criteria of an existing requirement. Always paste the full, updated requirement content (header + all scenarios). The archiver will replace the entire requirement with what you provide here; partial deltas will drop previous details.
+- RENAMED: Use when only the name changes. If you also change behavior, use RENAMED (name) plus MODIFIED (content) referencing the new name.
+
+Common pitfall: Using MODIFIED to add a new concern without including the previous text. This causes loss of detail at archive time. If you aren't explicitly changing the existing requirement, add a new requirement under ADDED instead.
+
+Authoring a MODIFIED requirement correctly:
+1) Locate the existing requirement in `spectr/specs/<capability>/spec.md`.
+2) Copy the entire requirement block (from `### Requirement: ...` through its scenarios).
+3) Paste it under `## MODIFIED Requirements` and edit to reflect the new behavior.
+4) Ensure the header text matches exactly (whitespace-insensitive) and keep at least one `#### Scenario:`.
+
+Example for RENAMED:
+```markdown
+## RENAMED Requirements
+- FROM: `### Requirement: Login`
+- TO: `### Requirement: User Authentication`
+```
+
+## Troubleshooting
+
+### Common Errors
+
+**"Change must have at least one delta"**
+- Check `changes/[name]/specs/` exists with .md files
+- Verify files have operation prefixes (## ADDED Requirements)
+
+**"Requirement must have at least one scenario"**
+- Check scenarios use `#### Scenario:` format (4 hashtags)
+- Don't use bullet points or bold for scenario headers
+
+**Silent scenario parsing failures**
+- Exact format required: `#### Scenario: Name`
+- Debug with: `spectr show [change] --json --deltas-only`
+
+### Validation Tips
+
+```bash
+# Always use strict mode for comprehensive checks
+spectr validate [change] --strict
+
+# Debug delta parsing
+spectr show [change] --json | jq '.deltas'
+
+# Check specific requirement
+spectr show [spec] --json -r 1
+```
+
+## Happy Path Script
+
+```bash
+# 1) Explore current state
+spectr spec list --long
+spectr list
+# Optional full-text search:
+# rg -n "Requirement:|Scenario:" spectr/specs
+# rg -n "^#|Requirement:" spectr/changes
+
+# 2) Choose change id and scaffold
+CHANGE=add-two-factor-auth
+mkdir -p spectr/changes/$CHANGE/{specs/auth}
+printf "## Why\\n...\\n\\n## What Changes\\n- ...\\n\\n## Impact\\n- ...\\n" > spectr/changes/$CHANGE/proposal.md
+printf "## 1. Implementation\\n- [ ] 1.1 ...\\n" > spectr/changes/$CHANGE/tasks.md
+
+# 3) Add deltas (example)
+cat > spectr/changes/$CHANGE/specs/auth/spec.md << 'EOF'
+## ADDED Requirements
+### Requirement: Two-Factor Authentication
+Users MUST provide a second factor during login.
+
+#### Scenario: OTP required
+- **WHEN** valid credentials are provided
+- **THEN** an OTP challenge is required
+EOF
+
+# 4) Validate
+spectr validate $CHANGE --strict
+```
+
+## Multi-Capability Example
+
+```
+spectr/changes/add-2fa-notify/
+├── proposal.md
+├── tasks.md
+└── specs/
+    ├── auth/
+    │   └── spec.md   # ADDED: Two-Factor Authentication
+    └── notifications/
+        └── spec.md   # ADDED: OTP email notification
+```
+
+auth/spec.md
+```markdown
+## ADDED Requirements
+### Requirement: Two-Factor Authentication
+...
+```
+
+notifications/spec.md
+```markdown
+## ADDED Requirements
+### Requirement: OTP Email Notification
+...
+```
+
+## Best Practices
+
+### Simplicity First
+- Default to <100 lines of new code
+- Single-file implementations until proven insufficient
+- Avoid frameworks without clear justification
+- Choose boring, proven patterns
+
+### Complexity Triggers
+Only add complexity with:
+- Performance data showing current solution too slow
+- Concrete scale requirements (>1000 users, >100MB data)
+- Multiple proven use cases requiring abstraction
+
+### Clear References
+- Use `file.ts:42` format for code locations
+- Reference specs as `specs/auth/spec.md`
+- Link related changes and PRs
+
+### Capability Naming
+- Use verb-noun: `user-auth`, `payment-capture`
+- Single purpose per capability
+- 10-minute understandability rule
+- Split if description needs "AND"
+
+### Change ID Naming
+- Use kebab-case, short and descriptive: `add-two-factor-auth`
+- Prefer verb-led prefixes: `add-`, `update-`, `remove-`, `refactor-`
+- Ensure uniqueness; if taken, append `-2`, `-3`, etc.
+
+## Tool Selection Guide
+
+| Task | Tool | Why |
+|------|------|-----|
+| Find files by pattern | Glob | Fast pattern matching |
+| Search code content | Grep | Optimized regex search |
+| Read specific files | Read | Direct file access |
+| Explore unknown scope | Task | Multi-step investigation |
+
+## Error Recovery
+
+### Change Conflicts
+1. Run `spectr list` to see active changes
+2. Check for overlapping specs
+3. Coordinate with change owners
+4. Consider combining proposals
+
+### Validation Failures
+1. Run with `--strict` flag
+2. Check JSON output for details
+3. Verify spec file format
+4. Ensure scenarios properly formatted
+
+### Missing Context
+1. Read project.md first
+2. Check related specs
+3. Review recent archives
+4. Ask for clarification
+
+## Quick Reference
+
+### Stage Indicators
+- `changes/` - Proposed, not yet built
+- `specs/` - Built and deployed
+- `archive/` - Completed changes
+
+### File Purposes
+- `proposal.md` - Why and what
+- `tasks.md` - Implementation steps
+- `design.md` - Technical decisions
+- `spec.md` - Requirements and behavior
+
+### CLI Essentials
+```bash
+spectr list              # What's in progress?
+spectr show [item]       # View details
+spectr validate --strict # Is it correct?
+spectr archive <change-id> [--yes|-y]  # Mark complete (add --yes for automation)
+```
+
+Remember: Specs are truth. Changes are proposals. Keep them in sync.
diff --git a/spectr/changes/add-nordvpn-rofi-program/proposal.md b/spectr/changes/add-nordvpn-rofi-program/proposal.md
new file mode 100644
index 00000000..69733abe
--- /dev/null
+++ b/spectr/changes/add-nordvpn-rofi-program/proposal.md
@@ -0,0 +1,14 @@
+# Change: Add NordVPN Rofi GUI Program
+
+## Why
+Currently, the repository has a basic shell script (`vpn-menu.sh`) for NordVPN interaction via rofi, but it lacks the structured menu system, state management, and polish of the Python-based `rofi-menu` approach used in `multitool`. A dedicated Python program provides better user experience with nested menus, dynamic content loading, and proper status display.
+
+## What Changes
+- Add new `modules/programs/nordvpn-rofi/` directory with Python source code using `rofi-menu` library
+- Package as a Denix module with NixOS support (Darwin excluded since NordVPN Linux client is NixOS-only)
+- Provide comprehensive VPN management: connect/disconnect, server selection by country/city/group, status display, and settings access
+
+## Impact
+- Affected specs: New `nordvpn-rofi` capability
+- Affected code: `modules/programs/nordvpn-rofi/` (new directory)
+- Dependencies: `rofi`, `nordvpn` CLI, `python3`, `rofi-menu` Python package, `libnotify`
diff --git a/spectr/changes/add-nordvpn-rofi-program/specs/nordvpn-rofi/spec.md b/spectr/changes/add-nordvpn-rofi-program/specs/nordvpn-rofi/spec.md
new file mode 100644
index 00000000..ef6c7a97
--- /dev/null
+++ b/spectr/changes/add-nordvpn-rofi-program/specs/nordvpn-rofi/spec.md
@@ -0,0 +1,90 @@
+## ADDED Requirements
+
+### Requirement: NordVPN Rofi Main Menu
+The program SHALL display a rofi-based main menu with options for VPN management when executed.
+
+#### Scenario: Launch main menu
+- **WHEN** user executes `nordvpn-rofi`
+- **THEN** a rofi menu appears with options: Quick Connect, Connect by Country, Connect by City, Connect by Group, Disconnect, Status, and Settings
+
+### Requirement: Quick Connect
+The program SHALL provide a quick connect option that connects to the fastest available server.
+
+#### Scenario: Quick connect success
+- **WHEN** user selects "Quick Connect" from main menu
+- **THEN** the program executes `nordvpn connect` and displays a notification with connection status
+
+### Requirement: Country Selection
+The program SHALL provide a submenu for connecting by country with dynamically loaded country list.
+
+#### Scenario: Connect by country
+- **WHEN** user selects "Connect by Country" from main menu
+- **THEN** the program displays a submenu populated from `nordvpn countries` output
+- **WHEN** user selects a country from the list
+- **THEN** the program executes `nordvpn connect <country>` and displays a notification
+
+### Requirement: City Selection
+The program SHALL provide a submenu for connecting by city with dynamically loaded city list based on selected country.
+
+#### Scenario: Connect by city
+- **WHEN** user selects "Connect by City" from main menu
+- **THEN** the program displays a country selection first
+- **WHEN** user selects a country
+- **THEN** the program displays cities from `nordvpn cities <country>` output
+- **WHEN** user selects a city
+- **THEN** the program executes `nordvpn connect <country> <city>` and displays a notification
+
+### Requirement: Server Group Selection
+The program SHALL provide a submenu for connecting by server group (P2P, Double VPN, etc.).
+
+#### Scenario: Connect by group
+- **WHEN** user selects "Connect by Group" from main menu
+- **THEN** the program displays a submenu populated from `nordvpn groups` output
+- **WHEN** user selects a group
+- **THEN** the program executes `nordvpn connect --group <group>` and displays a notification
+
+### Requirement: Disconnect
+The program SHALL provide an option to disconnect from the current VPN connection.
+
+#### Scenario: Disconnect from VPN
+- **WHEN** user selects "Disconnect" from main menu
+- **THEN** the program executes `nordvpn disconnect` and displays a notification confirming disconnection
+
+### Requirement: Connection Status Display
+The program SHALL display current VPN connection status in the main menu.
+
+#### Scenario: Show connection status
+- **WHEN** main menu loads
+- **THEN** a status item displays current connection state from `nordvpn status` (connected/disconnected, server, country, IP)
+
+### Requirement: Settings View
+The program SHALL display current NordVPN settings in a read-only submenu.
+
+#### Scenario: View settings
+- **WHEN** user selects "Settings" from main menu
+- **THEN** the program displays output from `nordvpn settings` in a readable format
+
+### Requirement: Notification Feedback
+The program SHALL display desktop notifications for all connection state changes.
+
+#### Scenario: Connection notification
+- **WHEN** a connect or disconnect operation completes
+- **THEN** a desktop notification is displayed with the operation result (success/failure and details)
+
+### Requirement: Nix Packaging
+The program SHALL be packaged as a Denix module installable via NixOS configuration.
+
+#### Scenario: Install via NixOS
+- **WHEN** `myconfig.programs.nordvpn-rofi.enable = true` is set in configuration
+- **THEN** the `nordvpn-rofi` command is available in system path with all dependencies (rofi, nordvpn, python3, libnotify)
+
+### Requirement: Error Handling
+The program SHALL gracefully handle error conditions from the NordVPN CLI.
+
+#### Scenario: Handle not logged in
+- **WHEN** user attempts to connect but is not logged into NordVPN
+- **THEN** the program displays a notification indicating login is required
+
+#### Scenario: Handle NordVPN not installed
+- **WHEN** nordvpn CLI is not available
+- **THEN** the program displays an error notification and exits gracefully
diff --git a/spectr/changes/add-nordvpn-rofi-program/tasks.md b/spectr/changes/add-nordvpn-rofi-program/tasks.md
new file mode 100644
index 00000000..7e7e16df
--- /dev/null
+++ b/spectr/changes/add-nordvpn-rofi-program/tasks.md
@@ -0,0 +1,26 @@
+## 1. Implementation
+
+- [ ] 1.1 Create `modules/programs/nordvpn-rofi/` directory structure
+- [ ] 1.2 Create `pyproject.toml` with `rofi-menu` dependency
+- [ ] 1.3 Implement `main.py` with rofi-menu based GUI:
+  - [ ] 1.3.1 Main menu with Connect/Disconnect/Status/Settings options
+  - [ ] 1.3.2 Country selection submenu (dynamic from `nordvpn countries`)
+  - [ ] 1.3.3 City selection submenu (dynamic from `nordvpn cities <country>`)
+  - [ ] 1.3.4 Server group selection submenu (dynamic from `nordvpn groups`)
+  - [ ] 1.3.5 Status display item showing current connection state
+  - [ ] 1.3.6 Quick connect option (fastest server)
+  - [ ] 1.3.7 Settings view (read-only display of `nordvpn settings`)
+- [ ] 1.4 Create `default.nix` Denix module with proper runtime dependencies
+- [ ] 1.5 Add README.md documenting usage
+
+## 2. Testing
+
+- [ ] 2.1 Build the package with `nix build`
+- [ ] 2.2 Manually test all menu options with NordVPN CLI available
+- [ ] 2.3 Verify notifications work correctly
+- [ ] 2.4 Test error handling (e.g., when not logged in)
+
+## 3. Integration
+
+- [ ] 3.1 Run `nix flake check` to validate module
+- [ ] 3.2 Run `nix develop -c lint` to check for issues
diff --git a/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/proposal.md b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/proposal.md
new file mode 100644
index 00000000..39e2df90
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/proposal.md
@@ -0,0 +1,13 @@
+# Change: Add Claude model shortcut programs (cldo, clds, cldk)
+
+## Why
+Users need quick shortcuts to launch Claude Code with specific models (Opus, Sonnet, Haiku) without manually typing the full command with flags each time.
+
+## What Changes
+- Add `cldo` program: launches Claude with `--model=opus --dangerously-skip-permissions`
+- Add `clds` program: launches Claude with `--model=sonnet --dangerously-skip-permissions`
+- Add `cldk` program: launches Claude with `--model=haiku --dangerously-skip-permissions`
+
+## Impact
+- Affected specs: claude-model-shortcuts (new capability)
+- Affected code: `modules/programs/cldo/`, `modules/programs/clds/`, `modules/programs/cldk/` (new directories)
diff --git a/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/specs/claude-model-shortcuts/spec.md b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/specs/claude-model-shortcuts/spec.md
new file mode 100644
index 00000000..2e50f766
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/specs/claude-model-shortcuts/spec.md
@@ -0,0 +1,33 @@
+## ADDED Requirements
+
+### Requirement: Claude Opus Shortcut (cldo)
+The system SHALL provide a `cldo` command that launches Claude Code with the Opus model.
+
+#### Scenario: Launch Claude with Opus model
+- **WHEN** user runs `cldo`
+- **THEN** Claude Code launches with `--model=opus --dangerously-skip-permissions` flags
+
+### Requirement: Claude Sonnet Shortcut (clds)
+The system SHALL provide a `clds` command that launches Claude Code with the Sonnet model.
+
+#### Scenario: Launch Claude with Sonnet model
+- **WHEN** user runs `clds`
+- **THEN** Claude Code launches with `--model=sonnet --dangerously-skip-permissions` flags
+
+### Requirement: Claude Haiku Shortcut (cldk)
+The system SHALL provide a `cldk` command that launches Claude Code with the Haiku model.
+
+#### Scenario: Launch Claude with Haiku model
+- **WHEN** user runs `cldk`
+- **THEN** Claude Code launches with `--model=haiku --dangerously-skip-permissions` flags
+
+### Requirement: Cross-Platform Availability
+All Claude model shortcut commands SHALL be available on both NixOS and macOS (Darwin) systems.
+
+#### Scenario: Available on NixOS
+- **WHEN** user is on a NixOS system with the feature enabled
+- **THEN** cldo, clds, and cldk commands are available in the system PATH
+
+#### Scenario: Available on macOS
+- **WHEN** user is on a macOS system with the feature enabled
+- **THEN** cldo, clds, and cldk commands are available in the system PATH
diff --git a/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/tasks.md b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/tasks.md
new file mode 100644
index 00000000..346d4eba
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-claude-model-shortcuts/tasks.md
@@ -0,0 +1,7 @@
+## 1. Implementation
+
+- [x] 1.1 Create `modules/programs/cldo/` with shell script and default.nix
+- [x] 1.2 Create `modules/programs/clds/` with shell script and default.nix
+- [x] 1.3 Create `modules/programs/cldk/` with shell script and default.nix
+- [x] 1.4 Test each program launches Claude with the correct model flag
+- [x] 1.5 Run `nix develop -c lint` to validate Nix code
diff --git a/spectr/changes/archive/2025-12-02-add-nvimf-program/proposal.md b/spectr/changes/archive/2025-12-02-add-nvimf-program/proposal.md
new file mode 100644
index 00000000..9b8b0fff
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-nvimf-program/proposal.md
@@ -0,0 +1,23 @@
+# Change: Add nvimf program for fuzzy file opening
+
+## Why
+The current `nvimf` alias in .zshrc relies on external tools (fzf, bat, nvim) being available and configured correctly. By converting it to a standalone program module, we gain:
+- Consistent deployment across all systems via Nix
+- Proper dependency management
+- Cross-platform support (NixOS/Darwin)
+- Integration with the engineer feature for automatic availability
+- Elimination of shell-specific configuration scattered across rc files
+
+## What Changes
+- Create new `nvimf` program module in `modules/programs/nvimf/`
+- Implement shell script wrapper around fzf + bat + nvim for interactive file opening
+- Remove hard-coded alias from `.zshrc` (line 53)
+- Add to engineer feature's default program set
+
+## Impact
+- Affected specs: `shell-utilities` (adding new file selection capability)
+- Affected code:
+  - New: `modules/programs/nvimf/default.nix` (Nix module definition)
+  - New: `modules/programs/nvimf/nvimf.sh` (shell script implementation)
+  - Modified: `.zshrc` (remove line 53: `alias nvimf='nvim "$(fzf --preview "bat --color=always {}")"'`)
+  - Modified: `modules/features/engineer.nix` (implicit - nvimf available to engineer users)
diff --git a/spectr/changes/archive/2025-12-02-add-nvimf-program/specs/shell-utilities/spec.md b/spectr/changes/archive/2025-12-02-add-nvimf-program/specs/shell-utilities/spec.md
new file mode 100644
index 00000000..8d29bb1d
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-nvimf-program/specs/shell-utilities/spec.md
@@ -0,0 +1,62 @@
+# Shell Utilities Specification
+
+## ADDED Requirements
+
+### Requirement: Fuzzy File Opening (nvimf)
+The system SHALL provide an `nvimf` command that enables interactive fuzzy file selection with syntax-highlighted preview and opens the selected file in Neovim.
+
+#### Scenario: Interactive file selection
+- **WHEN** user runs `nvimf` without arguments in a directory
+- **THEN** the system displays an interactive fuzzy finder listing all files in the current directory and subdirectories
+- **AND** shows a syntax-highlighted preview using bat for the selected file
+- **AND** opens the selected file in Neovim upon confirmation
+
+#### Scenario: No file selected
+- **WHEN** user runs `nvimf` and cancels the selection (ESC or Ctrl-C)
+- **THEN** the system exits without opening any file
+- **AND** returns a zero exit code (graceful cancellation)
+
+#### Scenario: Empty directory
+- **WHEN** user runs `nvimf` in a directory with no files
+- **THEN** the system displays an empty fuzzy finder
+- **AND** exits gracefully when canceled
+
+#### Scenario: Editor integration
+- **WHEN** user selects a file from the fuzzy finder
+- **THEN** the system opens the file in Neovim
+- **AND** preserves the terminal state and working directory
+
+### Requirement: Cross-Platform File Selection Deployment
+The `nvimf` program SHALL be deployed as a packaged Nix derivation with proper dependency management.
+
+#### Scenario: NixOS installation
+- **WHEN** nvimf module is enabled on a NixOS system
+- **THEN** the `nvimf` command is available in system PATH
+- **AND** required dependencies (fzf, bat, neovim) are automatically available
+
+#### Scenario: Darwin installation
+- **WHEN** nvimf module is enabled on a macOS system via nix-darwin
+- **THEN** the `nvimf` command is available in system PATH
+- **AND** required dependencies are automatically available
+
+#### Scenario: Engineer feature integration
+- **WHEN** the engineer feature is enabled
+- **THEN** nvimf is automatically available alongside other development tools
+
+### Requirement: Preview and Dependency Management
+The nvimf program SHALL explicitly declare its runtime dependencies (fzf, bat, neovim) and provide syntax-highlighted file previews.
+
+#### Scenario: Syntax highlighting in preview
+- **WHEN** user navigates through files in the fuzzy finder
+- **THEN** the preview pane shows syntax-highlighted content for recognized file types
+- **AND** uses bat's automatic language detection
+
+#### Scenario: Missing dependencies handled by Nix
+- **WHEN** nvimf module is installed via Nix
+- **THEN** all runtime dependencies are available in the wrapped script's PATH
+- **AND** the script does not fail due to missing commands
+
+#### Scenario: Script wrapper isolation
+- **WHEN** nvimf script is executed
+- **THEN** it uses the Nix-provided versions of fzf, bat, and neovim
+- **AND** does not rely on system-installed versions of these tools
diff --git a/spectr/changes/archive/2025-12-02-add-nvimf-program/tasks.md b/spectr/changes/archive/2025-12-02-add-nvimf-program/tasks.md
new file mode 100644
index 00000000..595ce6d0
--- /dev/null
+++ b/spectr/changes/archive/2025-12-02-add-nvimf-program/tasks.md
@@ -0,0 +1,27 @@
+# Implementation Tasks
+
+## 1. Create Program Module
+- [x] 1.1 Create `modules/programs/nvimf/` directory
+- [x] 1.2 Write `modules/programs/nvimf/nvimf.sh` shell script with fzf + bat + nvim logic
+- [x] 1.3 Create `modules/programs/nvimf/default.nix` with Denix module pattern
+- [x] 1.4 Add proper dependency wrapping (fzf, bat, neovim)
+- [x] 1.5 Include nixos and darwin platform support sections
+- [x] 1.6 Configure fzf with appropriate preview command and options
+
+## 2. Remove Legacy Alias
+- [x] 2.1 Remove line 53 from `.zshrc` (`alias nvimf='nvim "$(fzf --preview "bat --color=always {}")"'`)
+- [x] 2.2 Verify no other references to `nvimf` alias exist in dotfiles (check nushell config.nu)
+
+## 3. Testing
+- [x] 3.1 Build the program module: `cd modules/programs/nvimf && nix build`
+- [x] 3.2 Test on NixOS: `nixos-rebuild build --flake .`
+- [x] 3.3 Run `nvimf` manually in a test directory to verify functionality
+- [x] 3.4 Test file selection and verify Neovim opens correctly
+- [x] 3.5 Test cancellation behavior (ESC/Ctrl-C)
+- [x] 3.6 Test preview functionality with various file types
+- [x] 3.7 Verify engineer feature automatically includes nvimf
+
+## 4. Integration
+- [x] 4.1 Run `nix develop -c lint` to check for linting issues
+- [x] 4.2 Run `nix fmt` to format all Nix code
+- [x] 4.3 Verify `nix flake check` passes
diff --git a/spectr/changes/archive/2025-12-05-add-cf-program/proposal.md b/spectr/changes/archive/2025-12-05-add-cf-program/proposal.md
new file mode 100644
index 00000000..f9887fb7
--- /dev/null
+++ b/spectr/changes/archive/2025-12-05-add-cf-program/proposal.md
@@ -0,0 +1,22 @@
+# Change: Add cf program for fuzzy directory navigation
+
+## Why
+The current `cf` alias in .zshrc relies on external tools (`fd` and `fzf`) being available and configured correctly. By converting it to a standalone program module, we gain:
+- Consistent deployment across all systems via Nix
+- Proper dependency management
+- Cross-platform support (NixOS/Darwin)
+- Integration with the engineer feature for automatic availability
+
+## What Changes
+- Create new `cf` program module in `modules/programs/cf/`
+- Implement shell script wrapper around fd + fzf for directory navigation
+- Remove hard-coded alias from `.zshrc`
+- Add to engineer feature's default program set
+
+## Impact
+- Affected specs: `shell-utilities` (new capability)
+- Affected code:
+  - New: `modules/programs/cf/default.nix` (Nix module definition)
+  - New: `modules/programs/cf/cf.sh` (shell script implementation)
+  - Modified: `.zshrc` (remove line 50: `alias cf=...`)
+  - Modified: `modules/features/engineer.nix` (implicit - cf available to engineer users)
diff --git a/spectr/changes/archive/2025-12-05-add-cf-program/specs/shell-utilities/spec.md b/spectr/changes/archive/2025-12-05-add-cf-program/specs/shell-utilities/spec.md
new file mode 100644
index 00000000..743d6d86
--- /dev/null
+++ b/spectr/changes/archive/2025-12-05-add-cf-program/specs/shell-utilities/spec.md
@@ -0,0 +1,52 @@
+# Shell Utilities Specification
+
+## ADDED Requirements
+
+### Requirement: Fuzzy Directory Navigation (cf)
+The system SHALL provide a `cf` command that enables interactive fuzzy directory selection with preview.
+
+#### Scenario: Interactive directory selection
+- **WHEN** user runs `cf` without arguments
+- **THEN** the system displays an interactive fuzzy finder listing all directories (including hidden ones, excluding .git)
+- **AND** shows a preview of directory contents for the selected item
+- **AND** changes to the selected directory upon confirmation
+
+#### Scenario: No directory selected
+- **WHEN** user runs `cf` and cancels the selection (ESC or Ctrl-C)
+- **THEN** the system exits without changing directory
+- **AND** returns to the original working directory
+
+#### Scenario: Empty directory tree
+- **WHEN** user runs `cf` in a location with no subdirectories
+- **THEN** the system displays an empty fuzzy finder
+- **AND** exits without error when canceled
+
+### Requirement: Cross-Platform Shell Script Deployment
+The `cf` program SHALL be deployed as a packaged Nix derivation with proper dependency management.
+
+#### Scenario: NixOS installation
+- **WHEN** cf module is enabled on a NixOS system
+- **THEN** the `cf` command is available in system PATH
+- **AND** required dependencies (fd, fzf, ls) are automatically available
+
+#### Scenario: Darwin installation
+- **WHEN** cf module is enabled on a macOS system via nix-darwin
+- **THEN** the `cf` command is available in system PATH
+- **AND** required dependencies are automatically available
+
+#### Scenario: Engineer feature integration
+- **WHEN** the engineer feature is enabled
+- **THEN** cf is automatically available alongside other development tools
+
+### Requirement: Dependency Management
+The cf program SHALL explicitly declare its runtime dependencies (fd-find, fzf, coreutils).
+
+#### Scenario: Missing dependencies handled by Nix
+- **WHEN** cf module is installed via Nix
+- **THEN** all runtime dependencies are available in the wrapped script's PATH
+- **AND** the script does not fail due to missing commands
+
+#### Scenario: Script wrapper isolation
+- **WHEN** cf script is executed
+- **THEN** it uses the Nix-provided versions of fd, fzf, and ls
+- **AND** does not rely on system-installed versions of these tools
diff --git a/spectr/changes/archive/2025-12-05-add-cf-program/tasks.md b/spectr/changes/archive/2025-12-05-add-cf-program/tasks.md
new file mode 100644
index 00000000..edda3f49
--- /dev/null
+++ b/spectr/changes/archive/2025-12-05-add-cf-program/tasks.md
@@ -0,0 +1,24 @@
+# Implementation Tasks
+
+## 1. Create Program Module
+- [ ] 1.1 Create `modules/programs/cf/` directory
+- [ ] 1.2 Write `modules/programs/cf/cf.sh` shell script with fd + fzf logic
+- [ ] 1.3 Create `modules/programs/cf/default.nix` with Denix module pattern
+- [ ] 1.4 Add proper dependency wrapping (fd, fzf, coreutils)
+- [ ] 1.5 Include nixos and darwin platform support sections
+
+## 2. Remove Legacy Alias
+- [ ] 2.1 Remove line 50 from `.zshrc` (`alias cf='cd $(fd ...'`)
+- [ ] 2.2 Verify no other references to `cf` alias exist in dotfiles
+
+## 3. Testing
+- [ ] 3.1 Build the program module: `cd modules/programs/cf && nix build`
+- [ ] 3.2 Test on NixOS: `nixos-rebuild build --flake .`
+- [ ] 3.3 Run `cf` manually in a test directory to verify functionality
+- [ ] 3.4 Test cancellation behavior (ESC/Ctrl-C)
+- [ ] 3.5 Verify engineer feature automatically includes cf
+
+## 4. Integration
+- [ ] 4.1 Run `nix develop -c lint` to check for linting issues
+- [ ] 4.2 Run `nix fmt` to format all Nix code
+- [ ] 4.3 Verify `nix flake check` passes
diff --git a/spectr/changes/archive/2025-12-10-add-latest-program/proposal.md b/spectr/changes/archive/2025-12-10-add-latest-program/proposal.md
new file mode 100644
index 00000000..c974947e
--- /dev/null
+++ b/spectr/changes/archive/2025-12-10-add-latest-program/proposal.md
@@ -0,0 +1,16 @@
+# Change: Add `latest` program to replace shell alias
+
+## Why
+The current `latest` alias in `.zshrc` (`git add . && git commit -m "latest" && git push`) creates uninformative commit messages. Replacing it with a program that invokes `cldk` to generate AI-assisted commit messages will produce more meaningful git history.
+
+## What Changes
+- Create new program module `modules/programs/latest/` that calls `cldk "commit and push all changes with good commit messages"`
+- Remove `latest` alias from `.zshrc`
+- Enable the `latest` program in the engineer feature module for both NixOS and Darwin
+
+## Impact
+- Affected specs: `shell-utilities`
+- Affected code:
+  - `modules/programs/latest/` (new)
+  - `modules/features/engineer.nix` (add `latest.enable = true`)
+  - `.zshrc` (remove alias)
diff --git a/spectr/changes/archive/2025-12-10-add-latest-program/specs/shell-utilities/spec.md b/spectr/changes/archive/2025-12-10-add-latest-program/specs/shell-utilities/spec.md
new file mode 100644
index 00000000..7ef872a6
--- /dev/null
+++ b/spectr/changes/archive/2025-12-10-add-latest-program/specs/shell-utilities/spec.md
@@ -0,0 +1,16 @@
+## ADDED Requirements
+
+### Requirement: Latest Program
+The system SHALL provide a `latest` program that commits and pushes all changes with AI-generated commit messages using the `cldk` tool.
+
+#### Scenario: User runs latest in git repository
+- **WHEN** user executes `latest` in a git repository with uncommitted changes
+- **THEN** the program invokes `cldk "commit and push all changes with good commit messages"` to stage, commit, and push changes with meaningful AI-generated messages
+
+#### Scenario: Cross-platform availability
+- **WHEN** the engineer feature is enabled on NixOS or Darwin
+- **THEN** the `latest` program is available in the system PATH
+
+#### Scenario: Replaces shell alias
+- **WHEN** user previously used the `latest` alias in `.zshrc`
+- **THEN** the `latest` program provides the same entry point with improved commit message quality
diff --git a/spectr/changes/archive/2025-12-10-add-latest-program/tasks.md b/spectr/changes/archive/2025-12-10-add-latest-program/tasks.md
new file mode 100644
index 00000000..60996167
--- /dev/null
+++ b/spectr/changes/archive/2025-12-10-add-latest-program/tasks.md
@@ -0,0 +1,13 @@
+## 1. Implementation
+
+- [x] 1.1 Create `modules/programs/latest/` directory
+- [x] 1.2 Create `modules/programs/latest/latest.nix` with Denix module pattern
+- [x] 1.3 Add `latest.enable = true` to `modules/features/engineer.nix` for NixOS
+- [x] 1.4 Add `latest.enable = true` to `modules/features/engineer.nix` for Darwin
+- [x] 1.5 Remove `latest` alias from `.zshrc`
+
+## 2. Testing
+
+- [x] 2.1 Run `nix flake check` to validate module syntax
+- [x] 2.2 Run `nixos-rebuild build --flake .` to verify NixOS configuration builds
+- [x] 2.3 Manually test `latest` command in a test git repository
diff --git a/spectr/project.md b/spectr/project.md
new file mode 100644
index 00000000..6cdcdc6a
--- /dev/null
+++ b/spectr/project.md
@@ -0,0 +1,205 @@
+# Project Context
+
+## Purpose
+This is a modular NixOS/Home Manager dotfiles repository using the **Denix** framework for cross-platform configuration management. The project provides unified, type-safe configuration across:
+- NixOS systems (Linux)
+- macOS systems (via nix-darwin)
+- Standalone Home Manager deployments
+
+**Goals**:
+- Maintain reproducible, declarative system configurations
+- Enable feature-based modular architecture with automatic dependency resolution
+- Provide consistent theming and user experience across platforms
+- Package custom programs with cross-platform deployment
+- Offer development templates for quick project bootstrapping
+
+## Tech Stack
+
+### Core Technologies
+- **Nix**: Declarative package management and system configuration
+- **NixOS**: Linux distribution built on Nix
+- **Home Manager**: User environment management
+- **nix-darwin**: Nix-based macOS system configuration
+- **Denix**: Framework for modular, type-safe configuration with automatic discovery
+
+### Window Management & Desktop
+- **Hyprland**: Wayland compositor for Linux desktop environments
+- **Stylix**: Theme system with Base16 color scheme integration
+
+### Custom Programs (modules/programs/)
+- **Go**: `cmbd` (clipboard manager), `kiro` (custom tools)
+- **Python**: `convert_img` (image conversion utility with pytest tests)
+- **Ruby**: `catls` (enhanced directory listing)
+- **Shell**: `dx` (development environment helper)
+
+### External Integrations
+- **zen-browser**: Custom Firefox-based browser
+- **proton-authenticator**: Authentication integration
+- **conclaude**: Claude AI CLI integration
+- **nordvpn**: VPN configuration
+- **ghostty**: Terminal emulator
+
+### Development Tools
+- **treefmt-nix**: Code formatting
+- **statix**: Nix linting
+- **deadnix**: Dead code detection
+- **nix-index-database**: Fast package search
+- **sops-nix**: Secrets management
+- **disko**: Declarative disk partitioning
+
+## Project Conventions
+
+### Code Style
+- **Formatting**: Use `nix fmt` (treefmt) for all Nix code
+- **Linting**: Run `nix develop -c lint` before commits (statix + deadnix)
+- **File Naming**:
+  - Module files: lowercase with hyphens (e.g., `audio.nix`, `convert_img/`)
+  - Constants: camelCase for options (e.g., `myconfig.features.featureName`)
+- **Module Structure**: Use Denix patterns with explicit platform sections
+- **Indentation**: 2 spaces (enforced by treefmt)
+- **No emojis**: Unless explicitly requested in tests/documentation
+
+### Architecture Patterns
+
+#### Module System (Denix Framework)
+**Feature Modules** (`modules/features/`):
+```nix
+delib.module {
+  name = "feature-name";
+  options.myconfig.features.featureName = singleEnableOption false;
+  nixos.ifEnabled = { /* NixOS config */ };
+  darwin.ifEnabled = { /* macOS config */ };
+  home.ifEnabled = { /* Home Manager config */ };
+}
+```
+
+**Host Configurations** (`hosts/`):
+```nix
+delib.host {
+  type = "desktop"; # or "laptop", "server"
+  features = { featureName = true; };
+  rice = "dark";
+  nixos = { /* platform-specific */ };
+  darwin = { /* platform-specific */ };
+}
+```
+
+**Custom Programs** (`modules/programs/`):
+- Self-contained directories with source + `default.nix`
+- Cross-platform package definitions
+- Automatic integration into system packages
+
+#### Configuration Modules (`modules/config/`)
+- `constants.nix`: Read-only user constants (username, email, etc.)
+- `user.nix`: User account configuration
+- `hosts.nix`: Host type definitions and feature mappings
+- `args.nix`: Shared arguments between nixos/home-manager
+- `home.nix`: Home Manager patterns
+- `rices.nix`: Theme system configuration
+
+#### Theme System (`rices/`)
+- Stylix integration with Base16 color schemes
+- Consistent theming across all applications
+- Per-host theme selection via `rice` attribute
+
+### Testing Strategy
+
+#### Module Testing
+- **Feature modules**: `nix flake check` validates all outputs
+- **Program modules**: `cd modules/programs/<name> && nix build`
+- **NixOS configs**: `nixos-rebuild build --flake . --show-trace`
+- **Darwin configs**: `darwin-rebuild switch --flake . --show-trace`
+
+#### Program-Specific Testing
+- **Python programs**: `cd modules/programs/convert_img && python -m pytest tests/`
+- **Manual testing**: Edit any program → run manually to verify functionality
+- **Integration testing**: CI/CD via GitHub Actions (`.github/workflows/ci.yml`)
+
+#### Pre-Commit Checks
+1. Run `nix develop -c lint` (statix, deadnix, nix flake check)
+2. Run `nix fmt` for formatting
+3. Build affected configurations without switching
+4. Test modified programs manually
+
+#### Important Testing Note
+From `CLAUDE.md`: "If you ever write tests, you must actually verify that they work."
+
+### Git Workflow
+- **Main Branch**: `main` (target for PRs)
+- **Feature Branches**: Named descriptively (e.g., `update-n-hype`)
+- **CI/CD**: GitHub Actions runs on all commits
+- **Commit Style**: Descriptive messages, no enforced convention
+- **Submodules**: Recursive clone required (`git clone --recurse-submodules`)
+
+## Domain Context
+
+### Nix Ecosystem Knowledge
+- **Flakes**: Modern Nix package/configuration format with `flake.nix` entry point
+- **Derivations**: Build instructions for packages (`.drv` files)
+- **Nixpkgs**: Central package repository (using `nixos-unstable` channel)
+- **Overlays**: Mechanism to modify/extend nixpkgs
+- **Options**: Typed configuration parameters with automatic validation
+
+### Denix Framework Specifics
+- **Automatic Discovery**: Modules in `paths = [./hosts ./modules ./rices]` are auto-loaded
+- **Type Safety**: Leverages Nix's module system for type-safe configurations
+- **Platform Abstraction**: Single module definition works across nixos/darwin/home
+- **Feature Dependencies**: Automatic resolution (e.g., `engineer` enables dev tools)
+
+### Multi-Platform Considerations
+- **NixOS**: Full system configuration including kernel, services, users
+- **Darwin**: macOS system configuration (limited compared to NixOS)
+- **Home Manager**: User-space configuration (works on all platforms)
+- **Conditional Logic**: Use platform-specific sections to handle differences
+
+## Important Constraints
+
+### Technical Constraints
+- **Nix Language Only**: All configuration must be valid Nix expressions
+- **Reproducibility**: Builds must be deterministic and reproducible
+- **Purity**: No network access during builds (except fixed-output derivations)
+- **Platform Support**: Must maintain compatibility across NixOS, Darwin, and Home Manager
+- **Denix Framework**: Must follow Denix patterns for module structure
+
+### Development Environment
+- **Commands**: Must run via `nix develop -c <command>` for correct shell environment
+- **MCP Tools**: Use `nixos` and `context7` MCP servers for background info
+- **Testing**: All program edits require manual verification + automated tests
+
+### Breaking Changes
+- Changes affecting multiple hosts require testing on representative systems
+- Theme changes must verify Stylix integration remains functional
+- Feature dependency changes need validation across all dependent features
+
+## External Dependencies
+
+### Flake Inputs (Primary)
+- **nixpkgs**: `github:nixos/nixpkgs/nixos-unstable`
+- **home-manager**: `github:nix-community/home-manager/master`
+- **nix-darwin**: `github:nix-darwin/nix-darwin/master`
+- **denix**: `github:yunfachi/denix` (core framework)
+- **stylix**: `https://flakehub.com/f/danth/stylix/0.1.776`
+- **hyprland**: `github:hyprwm/hyprland`
+
+### Custom Flake Inputs
+- **zen-browser**: `github:connerohnesorge/zen-browser-flake`
+- **proton-authenticator**: `github:connerohnesorge/proton-authenticator-flake`
+- **conclaude**: `github:connix-io/conclaude`
+- **kiro-flake**: `github:connerohnesorge/kiro-flake`
+- **nordvpn**: `github:connerohnesorge/nordvpn-flake`
+
+### System Services
+- **NixOS-WSL**: `github:nix-community/NixOS-WSL/main` (Windows Subsystem for Linux)
+- **nixos-hardware**: `github:NixOS/nixos-hardware/master` (hardware-specific configs)
+- **nix-ld**: `github:Mic92/nix-ld` (dynamic library loading compatibility)
+
+### Development Tools
+- **treefmt-nix**: `github:numtide/treefmt-nix` (multi-formatter)
+- **nix-index-database**: `github:nix-community/nix-index-database` (package search)
+- **sops-nix**: `github:Mic92/sops-nix` (secrets management)
+- **disko**: `github:nix-community/disko` (declarative disk setup)
+- **nix-ai-tools**: `github:numtide/nix-ai-tools`
+
+### CI/CD
+- **GitHub Actions**: Automated testing and validation on push
+- **Determinate Systems**: `https://flakehub.com/f/DeterminateSystems/determinate/*`
diff --git a/spectr/specs/claude-model-shortcuts/spec.md b/spectr/specs/claude-model-shortcuts/spec.md
new file mode 100644
index 00000000..81a76599
--- /dev/null
+++ b/spectr/specs/claude-model-shortcuts/spec.md
@@ -0,0 +1,40 @@
+# Claude Model Shortcuts Specification
+
+## Purpose
+
+TODO: Add purpose description
+
+## Requirements
+
+### Requirement: Claude Opus Shortcut (cldo)
+The system SHALL provide a `cldo` command that launches Claude Code with the Opus model.
+
+#### Scenario: Launch Claude with Opus model
+- **WHEN** user runs `cldo`
+- **THEN** Claude Code launches with `--model=opus --dangerously-skip-permissions` flags
+
+### Requirement: Claude Sonnet Shortcut (clds)
+The system SHALL provide a `clds` command that launches Claude Code with the Sonnet model.
+
+#### Scenario: Launch Claude with Sonnet model
+- **WHEN** user runs `clds`
+- **THEN** Claude Code launches with `--model=sonnet --dangerously-skip-permissions` flags
+
+### Requirement: Claude Haiku Shortcut (cldk)
+The system SHALL provide a `cldk` command that launches Claude Code with the Haiku model.
+
+#### Scenario: Launch Claude with Haiku model
+- **WHEN** user runs `cldk`
+- **THEN** Claude Code launches with `--model=haiku --dangerously-skip-permissions` flags
+
+### Requirement: Cross-Platform Availability
+All Claude model shortcut commands SHALL be available on both NixOS and macOS (Darwin) systems.
+
+#### Scenario: Available on NixOS
+- **WHEN** user is on a NixOS system with the feature enabled
+- **THEN** cldo, clds, and cldk commands are available in the system PATH
+
+#### Scenario: Available on macOS
+- **WHEN** user is on a macOS system with the feature enabled
+- **THEN** cldo, clds, and cldk commands are available in the system PATH
+
diff --git a/spectr/specs/shell-utilities/spec.md b/spectr/specs/shell-utilities/spec.md
new file mode 100644
index 00000000..d23a5056
--- /dev/null
+++ b/spectr/specs/shell-utilities/spec.md
@@ -0,0 +1,130 @@
+# Shell Utilities Specification
+
+## Purpose
+
+TODO: Add purpose description
+
+## Requirements
+
+### Requirement: Fuzzy File Opening (nvimf)
+The system SHALL provide an `nvimf` command that enables interactive fuzzy file selection with syntax-highlighted preview and opens the selected file in Neovim.
+
+#### Scenario: Interactive file selection
+- **WHEN** user runs `nvimf` without arguments in a directory
+- **THEN** the system displays an interactive fuzzy finder listing all files in the current directory and subdirectories
+- **AND** shows a syntax-highlighted preview using bat for the selected file
+- **AND** opens the selected file in Neovim upon confirmation
+
+#### Scenario: No file selected
+- **WHEN** user runs `nvimf` and cancels the selection (ESC or Ctrl-C)
+- **THEN** the system exits without opening any file
+- **AND** returns a zero exit code (graceful cancellation)
+
+#### Scenario: Empty directory
+- **WHEN** user runs `nvimf` in a directory with no files
+- **THEN** the system displays an empty fuzzy finder
+- **AND** exits gracefully when canceled
+
+#### Scenario: Editor integration
+- **WHEN** user selects a file from the fuzzy finder
+- **THEN** the system opens the file in Neovim
+- **AND** preserves the terminal state and working directory
+
+### Requirement: Cross-Platform File Selection Deployment
+The `nvimf` program SHALL be deployed as a packaged Nix derivation with proper dependency management.
+
+#### Scenario: NixOS installation
+- **WHEN** nvimf module is enabled on a NixOS system
+- **THEN** the `nvimf` command is available in system PATH
+- **AND** required dependencies (fzf, bat, neovim) are automatically available
+
+#### Scenario: Darwin installation
+- **WHEN** nvimf module is enabled on a macOS system via nix-darwin
+- **THEN** the `nvimf` command is available in system PATH
+- **AND** required dependencies are automatically available
+
+#### Scenario: Engineer feature integration
+- **WHEN** the engineer feature is enabled
+- **THEN** nvimf is automatically available alongside other development tools
+
+### Requirement: Preview and Dependency Management
+The nvimf program SHALL explicitly declare its runtime dependencies (fzf, bat, neovim) and provide syntax-highlighted file previews.
+
+#### Scenario: Syntax highlighting in preview
+- **WHEN** user navigates through files in the fuzzy finder
+- **THEN** the preview pane shows syntax-highlighted content for recognized file types
+- **AND** uses bat's automatic language detection
+
+#### Scenario: Missing dependencies handled by Nix
+- **WHEN** nvimf module is installed via Nix
+- **THEN** all runtime dependencies are available in the wrapped script's PATH
+- **AND** the script does not fail due to missing commands
+
+#### Scenario: Script wrapper isolation
+- **WHEN** nvimf script is executed
+- **THEN** it uses the Nix-provided versions of fzf, bat, and neovim
+- **AND** does not rely on system-installed versions of these tools
+
+### Requirement: Fuzzy Directory Navigation (cf)
+The system SHALL provide a `cf` command that enables interactive fuzzy directory selection with preview.
+
+#### Scenario: Interactive directory selection
+- **WHEN** user runs `cf` without arguments
+- **THEN** the system displays an interactive fuzzy finder listing all directories (including hidden ones, excluding .git)
+- **AND** shows a preview of directory contents for the selected item
+- **AND** changes to the selected directory upon confirmation
+
+#### Scenario: No directory selected
+- **WHEN** user runs `cf` and cancels the selection (ESC or Ctrl-C)
+- **THEN** the system exits without changing directory
+- **AND** returns to the original working directory
+
+#### Scenario: Empty directory tree
+- **WHEN** user runs `cf` in a location with no subdirectories
+- **THEN** the system displays an empty fuzzy finder
+- **AND** exits without error when canceled
+
+### Requirement: Cross-Platform Shell Script Deployment
+The `cf` program SHALL be deployed as a packaged Nix derivation with proper dependency management.
+
+#### Scenario: NixOS installation
+- **WHEN** cf module is enabled on a NixOS system
+- **THEN** the `cf` command is available in system PATH
+- **AND** required dependencies (fd, fzf, ls) are automatically available
+
+#### Scenario: Darwin installation
+- **WHEN** cf module is enabled on a macOS system via nix-darwin
+- **THEN** the `cf` command is available in system PATH
+- **AND** required dependencies are automatically available
+
+#### Scenario: Engineer feature integration
+- **WHEN** the engineer feature is enabled
+- **THEN** cf is automatically available alongside other development tools
+
+### Requirement: Dependency Management
+The cf program SHALL explicitly declare its runtime dependencies (fd-find, fzf, coreutils).
+
+#### Scenario: Missing dependencies handled by Nix
+- **WHEN** cf module is installed via Nix
+- **THEN** all runtime dependencies are available in the wrapped script's PATH
+- **AND** the script does not fail due to missing commands
+
+#### Scenario: Script wrapper isolation
+- **WHEN** cf script is executed
+- **THEN** it uses the Nix-provided versions of fd, fzf, and ls
+- **AND** does not rely on system-installed versions of these tools
+
+### Requirement: Latest Program
+The system SHALL provide a `latest` program that commits and pushes all changes with AI-generated commit messages using the `cldk` tool.
+
+#### Scenario: User runs latest in git repository
+- **WHEN** user executes `latest` in a git repository with uncommitted changes
+- **THEN** the program invokes `cldk "commit and push all changes with good commit messages"` to stage, commit, and push changes with meaningful AI-generated messages
+
+#### Scenario: Cross-platform availability
+- **WHEN** the engineer feature is enabled on NixOS or Darwin
+- **THEN** the `latest` program is available in the system PATH
+
+#### Scenario: Replaces shell alias
+- **WHEN** user previously used the `latest` alias in `.zshrc`
+- **THEN** the `latest` program provides the same entry point with improved commit message quality
diff --git a/systems/aarch64-darwin/Conners-MacBook-Air/default.nix b/systems/aarch64-darwin/Conners-MacBook-Air/default.nix
deleted file mode 100644
index 48011054..00000000
--- a/systems/aarch64-darwin/Conners-MacBook-Air/default.nix
+++ /dev/null
@@ -1,96 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  # lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  # namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  # system, # The system architecture for this host (eg. `x86_64-linux`).
-  # target, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  # format, # A normalized name for the system target (eg. `iso`).
-  # virtual, # A boolean to determine whether this system is a virtual target using nixos-generators.
-  # systems, # An attribute map of your defined hosts.
-  # All other arguments come from the system system.
-  config,
-  ...
-}: {
-  # List packages installed in system profile. To search by name, run:
-  # $ nix-env -qaP | grep wget
-  environment.systemPackages = with pkgs; [
-    # Macos Only
-    aerospace
-    raycast
-    utm
-    xcodes
-  ];
-
-  nix.settings.trusted-users = ["root" "connerohnesorge" "@wheel"];
-
-  # Set Git commit hash for darwin-version.
-  system = {
-    # configurationRevision = self.rev or self.dirtyRev or null;
-    stateVersion = 5;
-    defaults = {
-      dock.autohide = true;
-
-      trackpad = {
-        Clicking = true;
-        TrackpadThreeFingerDrag = true;
-        Dragging = true;
-      };
-    };
-  };
-
-  environment.shells = [pkgs.zsh];
-  users.users.connerohnesorge = {
-    home = "/Users/connerohnesorge";
-    name = "connerohnesorge";
-  };
-
-  homebrew = {
-    enable = true;
-    brews = [
-      "goenv"
-      "ollama"
-      "go-task"
-    ];
-    casks = [
-      # "ghdl"
-    ];
-  };
-
-  nix-homebrew = {
-    enable = true;
-    enableRosetta = true;
-    user = "connerohnesorge";
-    taps = {
-      "homebrew/homebrew-core" = inputs.homebrew-core;
-      "homebrew/homebrew-cask" = inputs.homebrew-cask;
-      "homebrew/homebrew-bundle" = inputs.homebrew-bundle;
-    };
-    mutableTaps = false;
-  };
-  security.pam.enableSudoTouchIdAuth = true;
-  system.activationScripts.applications.text = let
-    env = pkgs.buildEnv {
-      name = "system-applications";
-      paths = config.environment.systemPackages;
-      pathsToLink = "/Applications";
-    };
-  in
-    pkgs.lib.mkForce ''
-      # Set up applications.
-      echo "setting up /Applications..." >&2
-      rm -rf /Applications/Nix\ Apps
-      mkdir -p /Applications/Nix\ Apps
-      find ${env}/Applications -maxdepth 1 -type l -exec readlink '{}' + |
-      while read -r src; do
-        app_name=$(basename "$src")
-        echo "copying $src" >&2
-        ${pkgs.mkalias}/bin/mkalias "$src" "/Applications/Nix Apps/$app_name"
-      done
-    '';
-}
diff --git a/systems/x86_64-linux/xps-nixos/default.nix b/systems/x86_64-linux/xps-nixos/default.nix
deleted file mode 100644
index 00ed5ce2..00000000
--- a/systems/x86_64-linux/xps-nixos/default.nix
+++ /dev/null
@@ -1,292 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  # lib,
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs,
-  # You also have access to your flake's inputs.
-  inputs,
-  # Additional metadata is provided by Snowfall Lib.
-  # namespace, # The namespace used for your flake, defaulting to "internal" if not set.
-  system, # The system architecture for this host (eg. `x86_64-linux`).
-  # target, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  # format, # A normalized name for the system target (eg. `iso`).
-  # virtual, # A boolean to determine whether this system is a virtual target using nixos-generators.
-  # systems, # An attribute map of your defined hosts.
-  config,
-  ...
-}: let
-  unstable-pkgs = import inputs.nixpkgs-unstable {
-    inherit system;
-    config = {
-      allowUnfree = true;
-    };
-  };
-in {
-  # Your configuration.
-  imports = [
-    ./hardware.nix
-  ];
-
-  snowfallorg.users.connerohnesorge = {
-    admin = true;
-    create = false;
-    home = {
-      enable = true;
-    };
-  };
-  # Leave this.
-  system.stateVersion = "24.11";
-
-  boot = {
-    # plymouth.enable = true;
-    loader.systemd-boot.enable = true;
-    loader.efi.canTouchEfiVariables = true;
-    initrd.kernelModules = ["nvidia" "i915" "nvidia_modeset" "nvidia_uvm" "nvidia_drm"];
-    blacklistedKernelModules = [
-      "nvidia"
-      "nvidia_uvm"
-      "nvidia_drm"
-      "nvidia_modeset"
-    ];
-  };
-
-  networking = {
-    hostName = "xps-nixos";
-    networkmanager.enable = true;
-    defaultGateway = {
-      address = "192.168.1.1";
-      interface = "wlp0s20f3";
-      # address = "192.168.1.19";
-      # interface = "enp0s13f0u3u1c2";
-    };
-  };
-
-  systemd = {
-    targets.network-online.wantedBy = pkgs.lib.mkForce []; # Normally ["multi-user.target"]
-    services.NetworkManager-wait-online.wantedBy = pkgs.lib.mkForce []; # Normally ["network-online.target"]
-  };
-
-  time.timeZone = "America/Chicago";
-
-  nix.extraOptions = ''
-    trusted-users = root connerohnesorge
-  '';
-
-  i18n = {
-    # Select internationalisation properties.
-    defaultLocale = "en_US.UTF-8";
-    extraLocaleSettings = {
-      LC_ADDRESS = "en_US.UTF-8";
-      LC_IDENTIFICATION = "en_US.UTF-8";
-      LC_MEASUREMENT = "en_US.UTF-8";
-      LC_MONETARY = "en_US.UTF-8";
-      LC_NAME = "en_US.UTF-8";
-      LC_NUMERIC = "en_US.UTF-8";
-      LC_PAPER = "en_US.UTF-8";
-      LC_TELEPHONE = "en_US.UTF-8";
-      LC_TIME = "en_US.UTF-8";
-    };
-  };
-
-  environment.variables = {
-    CUDA_PATH = unstable-pkgs.cudatoolkit;
-    EXTRA_LDFLAGS = "-L/lib -L${pkgs.linuxPackages.nvidia_x11}/lib";
-    EXTRA_CCFLAGS = "-I/usr/include";
-  };
-  hardware = {
-    graphics = {
-      enable = true;
-      extraPackages = with pkgs; [
-        mesa
-        mesa.drivers
-      ];
-    };
-    nvidia = {
-      modesetting.enable = true;
-      open = false;
-      nvidiaSettings = true;
-      package = config.boot.kernelPackages.nvidiaPackages.stable;
-      prime = {
-        intelBusId = "PCI:0:2:0";
-        nvidiaBusId = "PCI:1:0:0";
-      };
-    };
-    bluetooth = {
-      enable = true;
-      powerOnBoot = true;
-      settings = {
-        General = {
-          Name = "Hello";
-          ControllerMode = "dual";
-          FastConnectable = "true";
-          Experimental = "true";
-        };
-        Policy = {
-          AutoEnable = "true";
-        };
-      };
-    };
-  };
-
-  services = {
-    journald.extraConfig = ''
-      Storage=volatile RateLimitIntervalSec=30s
-      RateLimitBurst=10000
-      SystemMaxUse=16M
-      RuntimeMaxUse=16M
-    '';
-
-    xserver = {
-      enable = true;
-      videoDrivers = ["nvidia"];
-      displayManager.gdm.enable = true;
-      desktopManager.gnome.enable = true;
-      xkb = {
-        layout = "us";
-        variant = "";
-      };
-    };
-    printing.enable = true;
-    pipewire = {
-      enable = true;
-      alsa.enable = true;
-      alsa.support32Bit = true;
-      pulse.enable = true;
-    };
-    libinput.enable = true;
-    hypridle.enable = true;
-    tlp.enable = true;
-    power-profiles-daemon.enable = false;
-    ollama = {
-      enable = true;
-      package = unstable-pkgs.ollama;
-      acceleration = "cuda";
-    };
-  };
-
-  security.rtkit.enable = true;
-
-  users.users.connerohnesorge = {
-    isNormalUser = true;
-    description = "Conner Ohnesorge";
-    extraGroups = [
-      "networkmanager"
-      "wheel"
-      "docker"
-    ];
-    packages = with pkgs; [
-      thunderbird
-    ];
-  };
-  programs = {
-    steam.enable = true;
-    zsh.enable = true;
-    hyprland = {
-      enable = true;
-      withUWSM = true;
-      xwayland.enable = true;
-    };
-    hyprlock.enable = true;
-  };
-
-  environment.systemPackages = with pkgs; [
-    nix-ld
-    alejandra
-    nh
-    google-chrome
-    unstable-pkgs.hyprland
-    hyprcursor
-    hyprkeys
-    hyprpaper
-    hypridle
-    hyprsunset
-    hyprwayland-scanner
-    hyprutils
-    hyprnotify
-    inputs.hyprwm-qtutils.packages.${system}.hyprland-qtutils
-    inputs.ghostty.packages."${system}".default
-    waybar
-    xdg-desktop-portal-hyprland
-    uwsm
-    networkmanager_dmenu
-    tlp
-    dunst
-    pipewire
-    grimblast
-    grim
-    slurp
-    rofi
-    rofi-rbw
-    rofi-obsidian
-    rofi-bluetooth
-    rofi-power-menu
-    spotify
-    android-studio
-    gpu-screen-recorder
-    brightnessctl
-    wl-clipboard
-    gtk3
-    gtk-layer-shell
-    usbutils
-    vmware-horizon-client
-    sox
-    alsa-utils
-    alsa-lib
-    yazi
-    alsa-oss
-    docker
-    docker-compose
-    docker-compose-language-service
-    quartus-prime-lite
-    ghdl
-    nvc
-    lshw
-    pkgconf
-    nvidia-docker
-    nvtopPackages.nvidia
-    gdb
-    gitRepo
-    gnupg
-    autoconf
-    curl
-    procps
-    gnumake
-    util-linux
-    m4
-    gperf
-    unzip
-    cudatoolkit
-    linuxPackages.nvidia_x11
-    libGLU
-    libGL
-    xorg.libXi
-    xorg.libXmu
-    freeglut
-    xorg.libXext
-    xorg.libX11
-    xorg.libXv
-    xorg.libXrandr
-    zlib
-    ncurses5
-    stdenv.cc
-    binutils
-    espeak-ng
-    espeak
-  ];
-
-  stylix = {
-    enable = true;
-    autoEnable = true;
-    base16Scheme = "${pkgs.base16-schemes}/share/themes/tokyodark.yaml";
-    image = ./../../../assets/klaus-desktop.jpeg;
-    polarity = "dark";
-    targets = {
-      grub.enable = false;
-      plymouth.enable = false;
-      gnome.enable = true;
-      gtk.enable = true;
-      spicetify.enable = true;
-    };
-  };
-}
diff --git a/systems/x86_64-linux/xps-nixos/hardware.nix b/systems/x86_64-linux/xps-nixos/hardware.nix
deleted file mode 100644
index 42564fbd..00000000
--- a/systems/x86_64-linux/xps-nixos/hardware.nix
+++ /dev/null
@@ -1,54 +0,0 @@
-{
-  config,
-  lib,
-  modulesPath,
-  inputs,
-  ...
-}: {
-  imports = [
-    (modulesPath + "/installer/scan/not-detected.nix")
-    inputs.nixos-hardware.nixosModules.dell-xps-15-9510
-  ];
-
-  # virtualisation.docker.enable = true;
-  # hardware.nvidia-container-toolkit.enable = true;
-
-  boot = {
-    initrd.availableKernelModules = ["xhci_pci" "thunderbolt" "nvme" "uas" "sd_mod" "rtsx_pci_sdmmc"];
-    initrd.kernelModules = [];
-    kernelModules = ["kvm-intel"];
-    extraModulePackages = [];
-  };
-
-  fileSystems."/" = {
-    device = "/dev/disk/by-uuid/fd77e04d-21ab-4b5d-a2b0-14d54f734848";
-    fsType = "ext4";
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/DBE6-A378";
-    fsType = "vfat";
-    options = ["fmask=0077" "dmask=0077"];
-  };
-
-  swapDevices = [];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking = {
-    useDHCP = lib.mkDefault true;
-    # interfaces.enp0s13f0u3u1c2 = {
-    #   useDHCP = true; # If you want to use DHCP
-    #   # Or for static IP:
-    #   # ipv4.addresses = [ {
-    #   #   address = "192.168.1.2";
-    #   #   prefixLength = 24;
-    #   # } ];
-    # };
-  };
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}
diff --git a/templates/askama-shell/.env.example b/templates/askama-shell/.env.example
new file mode 100644
index 00000000..2f1deae1
--- /dev/null
+++ b/templates/askama-shell/.env.example
@@ -0,0 +1,15 @@
+# Database Configuration
+DATABASE_URL=sqlite:app.db
+
+# Server Configuration
+HOST=127.0.0.1
+PORT=3000
+
+# Logging Configuration
+RUST_LOG=debug
+
+# Session Configuration (optional)
+SESSION_SECRET=your-secret-key-here
+
+# Development Settings
+NODE_ENV=development
\ No newline at end of file
diff --git a/templates/askama-shell/.envrc b/templates/askama-shell/.envrc
new file mode 100644
index 00000000..bb1dcfa1
--- /dev/null
+++ b/templates/askama-shell/.envrc
@@ -0,0 +1,10 @@
+use flake
+
+# Load environment variables from .env if it exists
+dotenv_if_exists
+
+# Set development environment variables
+export RUST_LOG=debug
+export DATABASE_URL=sqlite:app.db
+export PORT=3000
+export HOST=127.0.0.1
\ No newline at end of file
diff --git a/templates/askama-shell/.gitignore b/templates/askama-shell/.gitignore
new file mode 100644
index 00000000..8483cacb
--- /dev/null
+++ b/templates/askama-shell/.gitignore
@@ -0,0 +1,47 @@
+# Rust
+/target/
+**/*.rs.bk
+Cargo.lock
+
+# Database
+*.db
+*.db-shm
+*.db-wal
+
+# Environment
+.env
+
+# Node.js
+node_modules/
+npm-debug.log*
+yarn-debug.log*
+yarn-error.log*
+
+# Built assets
+/assets/dist/
+
+# Logs
+*.log
+
+# OS
+.DS_Store
+.DS_Store?
+._*
+.Spotlight-V100
+.Trashes
+ehthumbs.db
+Thumbs.db
+
+# Editor
+.vscode/
+.idea/
+*.swp
+*.swo
+*~
+
+# Nix
+result
+result-*
+
+# Development
+.direnv/
\ No newline at end of file
diff --git a/templates/askama-shell/Cargo.toml b/templates/askama-shell/Cargo.toml
new file mode 100644
index 00000000..8a35269b
--- /dev/null
+++ b/templates/askama-shell/Cargo.toml
@@ -0,0 +1,54 @@
+[package]
+name = "rust-web-shell"
+version = "0.1.0"
+edition = "2021"
+build = "build.rs"
+
+[dependencies]
+# Web framework
+axum = { version = "0.7", features = ["macros"] }
+tower-sessions = "0.12"
+tower = "0.4"
+tower-http = { version = "0.5", features = ["fs", "cors", "trace"] }
+hyper = { version = "1.0", features = ["full"] }
+
+# Templates
+askama = { version = "0.12", features = ["with-axum"] }
+askama_axum = "0.4"
+
+# Database & ORM
+sqlx = { version = "0.7", features = ["runtime-tokio-rustls", "sqlite", "uuid", "chrono", "migrate"] }
+uuid = { version = "1.0", features = ["v4", "serde"] }
+chrono = { version = "0.4", features = ["serde"] }
+
+# Serialization
+serde = { version = "1.0", features = ["derive"] }
+serde_json = "1.0"
+
+# Async runtime
+tokio = { version = "1.0", features = ["full"] }
+
+# Password hashing
+argon2 = "0.5"
+rand = "0.8"
+
+# Validation
+validator = { version = "0.18", features = ["derive"] }
+
+# Environment and configuration
+dotenvy = "0.15"
+
+# Logging
+tracing = "0.1"
+tracing-subscriber = { version = "0.3", features = ["env-filter"] }
+
+# Error handling
+anyhow = "1.0"
+thiserror = "1.0"
+
+[build-dependencies]
+# No special build dependencies needed
+# Assets are built via build.rs using npm/node
+
+[dev-dependencies]
+tempfile = "3.8"
\ No newline at end of file
diff --git a/templates/askama-shell/README.md b/templates/askama-shell/README.md
new file mode 100644
index 00000000..6e12a410
--- /dev/null
+++ b/templates/askama-shell/README.md
@@ -0,0 +1,155 @@
+# Rust Web Shell
+
+A modern, full-stack web application template built with Rust, featuring authentication, session management, and a beautiful UI.
+
+## Features
+
+- 🦀 **Rust Backend** - Fast and safe backend built with Axum
+- 🎨 **Modern Frontend** - TailwindCSS for styling, Alpine.js for interactivity
+- 🔒 **Authentication** - Complete user registration and login system
+- 📱 **Responsive Design** - Works beautifully on desktop and mobile
+- ⚡ **Fast Build** - Optimized build process with asset bundling
+- 🛡️ **Secure** - Password hashing, session management, and CSRF protection
+
+## Tech Stack
+
+- **Backend**: Rust, Axum, SQLx, SQLite
+- **Frontend**: TailwindCSS, Alpine.js, TypeScript
+- **Templates**: Askama
+- **Session Management**: axum-sessions
+- **Password Hashing**: Argon2
+- **Development**: Nix, direnv, just
+
+## Quick Start
+
+### Prerequisites
+
+- [Nix](https://nixos.org/download.html) with flakes enabled
+- [direnv](https://direnv.net/) (optional but recommended)
+
+### Setup
+
+1. **Enter the development environment:**
+   ```bash
+   nix develop
+   # or if you have direnv: just cd into the directory
+   ```
+
+2. **Set up the project:**
+   ```bash
+   just setup
+   ```
+
+3. **Run the development server:**
+   ```bash
+   just dev
+   ```
+
+4. **Visit the application:**
+   - Home: http://localhost:3000
+   - Login: http://localhost:3000/login
+   - Signup: http://localhost:3000/signup
+   - Dashboard: http://localhost:3000/dashboard
+
+## Available Commands
+
+```bash
+# Development
+just setup          # Install dependencies and build assets
+just dev            # Run with auto-reload
+just run            # Run the application
+
+# Database
+just migrate        # Run database migrations
+just migrate-create # Create a new migration
+just db-reset       # Reset database
+
+# Building
+just build          # Build for production
+just check          # Check code (clippy)
+just fmt            # Format code
+
+# Testing
+just test           # Run tests
+```
+
+## Environment Variables
+
+Create a `.env` file in the project root:
+
+```bash
+# Database
+DATABASE_URL=sqlite:app.db
+
+# Server
+HOST=127.0.0.1
+PORT=3000
+
+# Logging
+RUST_LOG=debug
+```
+
+## Project Structure
+
+```
+├── src/
+│   ├── handlers/        # Request handlers
+│   ├── models/          # Database models
+│   ├── lib.rs          # Library setup
+│   └── main.rs         # Application entry point
+├── templates/          # Askama HTML templates
+├── migrations/         # Database migrations
+├── assets/
+│   ├── js/            # TypeScript/JavaScript files
+│   ├── styles/        # CSS files
+│   └── dist/          # Built assets (auto-generated)
+├── flake.nix          # Nix development environment
+├── build.rs           # Build script for assets
+├── justfile           # Task runner commands
+└── README.md
+```
+
+## Development Workflow
+
+1. **Make changes** to Rust code, templates, or assets
+2. **Auto-reload** is enabled in development mode
+3. **Assets are rebuilt** automatically when frontend files change
+4. **Database migrations** are applied automatically on startup
+
+## Adding Features
+
+### Adding a New Page
+
+1. Create a template in `templates/`
+2. Add a handler in `src/handlers/`
+3. Add a route in `src/lib.rs`
+
+### Adding Database Tables
+
+1. Create a migration: `just migrate-create table_name`
+2. Edit the migration file in `migrations/`
+3. Add a model in `src/models/`
+4. Run migrations: `just migrate`
+
+### Customizing Styles
+
+1. Edit `assets/styles/input.css`
+2. Modify `tailwind.config.js` for theme customization
+3. Assets rebuild automatically in development
+
+## Deployment
+
+1. **Build for production:**
+   ```bash
+   just build
+   ```
+
+2. **Set environment variables** for production
+3. **Run the binary:**
+   ```bash
+   ./target/release/rust-web-shell
+   ```
+
+## License
+
+This project is available as a template. Use it as the foundation for your own projects.
\ No newline at end of file
diff --git a/templates/askama-shell/assets/js/index.ts b/templates/askama-shell/assets/js/index.ts
new file mode 100644
index 00000000..7b1f702a
--- /dev/null
+++ b/templates/askama-shell/assets/js/index.ts
@@ -0,0 +1,29 @@
+import Alpine from "alpinejs"; // https://alpinejs.dev/start-here
+import intersect from "@alpinejs/intersect"; // https://alpinejs.dev/plugins/intersect
+import anchor from "@alpinejs/anchor"; // https://alpinejs.dev/plugins/anchor
+import morph from "@alpinejs/morph"; // https://alpinejs.dev/plugins/morph
+import mask from "@alpinejs/mask"; // https://alpinejs.dev/plugins/mask
+import persist from "@alpinejs/persist"; // https://alpinejs.dev/plugins/persist
+import focus from "@alpinejs/focus"; // https://alpinejs.dev/plugins/focus
+import collapse from "@alpinejs/collapse"; // https://alpinejs.dev/plugins/collapse
+import resize from "@alpinejs/resize"; // https://alpinejs.dev/plugins/resize
+import ajax from "@imacrayon/alpine-ajax"; // https://alpine-ajax.js.org/reference
+
+declare global {
+  interface Window {
+    MathJax: typeof MathJax;
+    Alpine: typeof Alpine;
+  }
+}
+
+Alpine.plugin(intersect);
+Alpine.plugin(anchor);
+Alpine.plugin(morph);
+Alpine.plugin(mask);
+Alpine.plugin(persist);
+Alpine.plugin(focus);
+Alpine.plugin(collapse);
+Alpine.plugin(resize);
+Alpine.plugin(ajax);
+
+Alpine.start();
\ No newline at end of file
diff --git a/templates/askama-shell/assets/styles/input.css b/templates/askama-shell/assets/styles/input.css
new file mode 100644
index 00000000..de2109a0
--- /dev/null
+++ b/templates/askama-shell/assets/styles/input.css
@@ -0,0 +1,46 @@
+@tailwind base;
+@tailwind components;
+@tailwind utilities;
+
+/* Custom styles */
+@layer components {
+  .btn {
+    @apply px-4 py-2 rounded-md font-medium transition-colors duration-200;
+  }
+  
+  .btn-primary {
+    @apply bg-blue-600 text-white hover:bg-blue-700 focus:ring-2 focus:ring-blue-500 focus:ring-offset-2;
+  }
+  
+  .btn-secondary {
+    @apply bg-gray-600 text-white hover:bg-gray-700 focus:ring-2 focus:ring-gray-500 focus:ring-offset-2;
+  }
+  
+  .form-input {
+    @apply mt-1 block w-full rounded-md border-gray-300 shadow-sm focus:border-blue-500 focus:ring-blue-500;
+  }
+  
+  .form-label {
+    @apply block text-sm font-medium text-gray-700;
+  }
+  
+  .card {
+    @apply bg-white shadow-md rounded-lg p-6;
+  }
+  
+  .alert {
+    @apply p-4 rounded-md border;
+  }
+  
+  .alert-error {
+    @apply bg-red-50 border-red-200 text-red-800;
+  }
+  
+  .alert-success {
+    @apply bg-green-50 border-green-200 text-green-800;
+  }
+  
+  .alert-info {
+    @apply bg-blue-50 border-blue-200 text-blue-800;
+  }
+}
diff --git a/templates/askama-shell/build.rs b/templates/askama-shell/build.rs
new file mode 100644
index 00000000..ecdecea4
--- /dev/null
+++ b/templates/askama-shell/build.rs
@@ -0,0 +1,163 @@
+use std::env;
+use std::fs;
+use std::path::Path;
+use std::process::Command;
+
+fn main() {
+    // Tell cargo to rerun if these files change
+    println!("cargo:rerun-if-changed=assets/");
+    println!("cargo:rerun-if-changed=package.json");
+    println!("cargo:rerun-if-changed=tailwind.config.js");
+    println!("cargo:rerun-if-changed=tsconfig.json");
+    println!("cargo:rerun-if-changed=input.css");
+
+    let out_dir = env::var("OUT_DIR").unwrap();
+    let assets_dir = Path::new("assets");
+    let dist_dir = assets_dir.join("dist");
+
+    // Create assets directories if they don't exist
+    if !assets_dir.exists() {
+        fs::create_dir_all(&assets_dir).expect("Failed to create assets directory");
+    }
+
+    if !dist_dir.exists() {
+        fs::create_dir_all(&dist_dir).expect("Failed to create dist directory");
+    }
+
+    // Ensure styles directory exists
+    let styles_dir = assets_dir.join("styles");
+    if !styles_dir.exists() {
+        fs::create_dir_all(&styles_dir).expect("Failed to create styles directory");
+    }
+
+    // Ensure js directory exists
+    let js_dir = assets_dir.join("js");
+    if !js_dir.exists() {
+        fs::create_dir_all(&js_dir).expect("Failed to create js directory");
+    }
+
+    // Create input.css if it doesn't exist
+    let input_css = styles_dir.join("input.css");
+    if !input_css.exists() {
+        let default_css = r#"@tailwind base;
+@tailwind components;
+@tailwind utilities;
+
+/* Custom styles */
+@layer components {
+  .btn {
+    @apply px-4 py-2 rounded-md font-medium transition-colors duration-200;
+  }
+  
+  .btn-primary {
+    @apply bg-blue-600 text-white hover:bg-blue-700 focus:ring-2 focus:ring-blue-500 focus:ring-offset-2;
+  }
+  
+  .btn-secondary {
+    @apply bg-gray-600 text-white hover:bg-gray-700 focus:ring-2 focus:ring-gray-500 focus:ring-offset-2;
+  }
+  
+  .form-input {
+    @apply mt-1 block w-full rounded-md border-gray-300 shadow-sm focus:border-blue-500 focus:ring-blue-500;
+  }
+  
+  .form-label {
+    @apply block text-sm font-medium text-gray-700;
+  }
+  
+  .card {
+    @apply bg-white shadow-md rounded-lg p-6;
+  }
+  
+  .alert {
+    @apply p-4 rounded-md border;
+  }
+  
+  .alert-error {
+    @apply bg-red-50 border-red-200 text-red-800;
+  }
+  
+  .alert-success {
+    @apply bg-green-50 border-green-200 text-green-800;
+  }
+  
+  .alert-info {
+    @apply bg-blue-50 border-blue-200 text-blue-800;
+  }
+}
+"#;
+        fs::write(&input_css, default_css).expect("Failed to create input.css");
+    }
+
+    // Check if bun is available and install dependencies if needed
+    if !Path::new("node_modules").exists() {
+        println!("cargo:warning=Installing dependencies with bun...");
+        let output = Command::new("bun")
+            .arg("install")
+            .output()
+            .expect("Failed to run bun install");
+
+        if !output.status.success() {
+            panic!(
+                "bun install failed: {}",
+                String::from_utf8_lossy(&output.stderr)
+            );
+        }
+    }
+
+    // Build CSS with TailwindCSS using bun
+    println!("cargo:warning=Building CSS with TailwindCSS...");
+    let css_output = Command::new("bun")
+        .args([
+            "x",
+            "tailwindcss",
+            "-i",
+            "assets/styles/input.css",
+            "-o",
+            "assets/dist/output.css",
+            "--minify",
+        ])
+        .output()
+        .expect("Failed to run TailwindCSS");
+
+    if !css_output.status.success() {
+        panic!(
+            "TailwindCSS build failed: {}",
+            String::from_utf8_lossy(&css_output.stderr)
+        );
+    }
+
+    // Build TypeScript with bun
+    println!("cargo:warning=Building TypeScript with bun...");
+    let js_output = Command::new("bun")
+        .args([
+            "build",
+            "assets/js/index.ts",
+            "--minify",
+            "--format=iife",
+            "--outfile=assets/dist/index.js",
+        ])
+        .output()
+        .expect("Failed to run bun build");
+
+    if !js_output.status.success() {
+        panic!(
+            "bun build failed: {}",
+            String::from_utf8_lossy(&js_output.stderr)
+        );
+    }
+
+    // Copy built assets to OUT_DIR so they can be included in the binary
+    let target_css = Path::new(&out_dir).join("output.css");
+    let target_js = Path::new(&out_dir).join("index.js");
+
+    if Path::new("assets/dist/output.css").exists() {
+        fs::copy("assets/dist/output.css", &target_css).expect("Failed to copy CSS to OUT_DIR");
+    }
+
+    if Path::new("assets/dist/index.js").exists() {
+        fs::copy("assets/dist/index.js", &target_js).expect("Failed to copy JS to OUT_DIR");
+    }
+
+    println!("cargo:warning=Assets built successfully!");
+}
diff --git a/templates/askama-shell/bun.lock b/templates/askama-shell/bun.lock
new file mode 100644
index 00000000..5f892388
--- /dev/null
+++ b/templates/askama-shell/bun.lock
@@ -0,0 +1,386 @@
+{
+  "lockfileVersion": 1,
+  "workspaces": {
+    "": {
+      "name": "rust-web-shell",
+      "dependencies": {
+        "@alpinejs/anchor": "^3.13.3",
+        "@alpinejs/collapse": "^3.13.3",
+        "@alpinejs/focus": "^3.13.3",
+        "@alpinejs/intersect": "^3.13.3",
+        "@alpinejs/mask": "^3.13.3",
+        "@alpinejs/morph": "^3.13.3",
+        "@alpinejs/persist": "^3.13.3",
+        "@alpinejs/resize": "^3.13.3",
+        "@imacrayon/alpine-ajax": "^0.10.1",
+        "alpinejs": "^3.13.3",
+      },
+      "devDependencies": {
+        "@tailwindcss/forms": "^0.5.7",
+        "@tailwindcss/typography": "^0.5.10",
+        "@types/alpinejs": "^3.13.5",
+        "concurrently": "^8.2.2",
+        "esbuild": "^0.19.8",
+        "tailwindcss": "^3.3.6",
+        "typescript": "^5.3.2",
+      },
+    },
+  },
+  "packages": {
+    "@alloc/quick-lru": ["@alloc/quick-lru@5.2.0", "", {}, "sha512-UrcABB+4bUrFABwbluTIBErXwvbsU/V7TZWfmbgJfbkwiBuziS9gxdODUyuiecfdGQ85jglMW6juS3+z5TsKLw=="],
+
+    "@alpinejs/anchor": ["@alpinejs/anchor@3.14.9", "", {}, "sha512-rx/ayMtLgtInXiY6zIikWM6+23uqGdp/zqpzlKp86P8s4+q9famgcO5NXIAXbAai1DV9Ec0QIpV+j3Wl/U1U+A=="],
+
+    "@alpinejs/collapse": ["@alpinejs/collapse@3.14.9", "", {}, "sha512-cUjbBVo4KR/CfFg0cLB+Q7a8SnjmD4MdxmtZvFjh25Dlf/ZWYPSPx/28b+aAykuX/SUoDPQRmdFiVVvq+iILHw=="],
+
+    "@alpinejs/focus": ["@alpinejs/focus@3.14.9", "", { "dependencies": { "focus-trap": "^6.9.4", "tabbable": "^5.3.3" } }, "sha512-+OMOcdkyEUr3gYWD0ZVqojLotI9D67F5BxGesDfZcPaGtNifXMoq0vt0UVDivGnXQXosOfNpO++GF4NzGrWE9Q=="],
+
+    "@alpinejs/intersect": ["@alpinejs/intersect@3.14.9", "", {}, "sha512-6LLIqrESA5kxuTbDJshtItfHmZoiiDOpf8lOeRrNtYjSj/FkggDpnjD+ZFGF5btEOVSpWic2VmG2BejR/aMxDw=="],
+
+    "@alpinejs/mask": ["@alpinejs/mask@3.14.9", "", {}, "sha512-duuEo1tkrpxqBXISXWU6y4pnIdp22OzmgrQ0Q+W4R/mG2545rl360ihI3Dolbv2dS2E3C0sFsmS0pZcpFaGOZw=="],
+
+    "@alpinejs/morph": ["@alpinejs/morph@3.14.9", "", {}, "sha512-i1mrH5Gza/egszxnCVwQWypRhsKGq28RFWHWuW7aI0+rWo1pvFw+aPhJLImbpt7hx44DtDOr5m4l9Ah+JPFmFw=="],
+
+    "@alpinejs/persist": ["@alpinejs/persist@3.14.9", "", {}, "sha512-Td9hWEUtFFguYCRjXhq06sDultW21wXUnVro7YWJm+vjGu/nV/v3hepOXyYVjkGvH/F+zjx5UkzWXXzr3UiQ/w=="],
+
+    "@alpinejs/resize": ["@alpinejs/resize@3.14.9", "", {}, "sha512-UmKDn8MiuBLQxhohidze3NniMmXwFkLoul+IWnCDZO1mPCR0Q4227wjAYyj0P8pQwgARMUTiHrwdpYUId3vtnA=="],
+
+    "@babel/runtime": ["@babel/runtime@7.27.6", "", {}, "sha512-vbavdySgbTTrmFE+EsiqUTzlOr5bzlnJtUv9PynGCAKvfQqjIXbvFdumPM/GxMDfyuGMJaJAU6TO4zc1Jf1i8Q=="],
+
+    "@esbuild/aix-ppc64": ["@esbuild/aix-ppc64@0.19.12", "", { "os": "aix", "cpu": "ppc64" }, "sha512-bmoCYyWdEL3wDQIVbcyzRyeKLgk2WtWLTWz1ZIAZF/EGbNOwSA6ew3PftJ1PqMiOOGu0OyFMzG53L0zqIpPeNA=="],
+
+    "@esbuild/android-arm": ["@esbuild/android-arm@0.19.12", "", { "os": "android", "cpu": "arm" }, "sha512-qg/Lj1mu3CdQlDEEiWrlC4eaPZ1KztwGJ9B6J+/6G+/4ewxJg7gqj8eVYWvao1bXrqGiW2rsBZFSX3q2lcW05w=="],
+
+    "@esbuild/android-arm64": ["@esbuild/android-arm64@0.19.12", "", { "os": "android", "cpu": "arm64" }, "sha512-P0UVNGIienjZv3f5zq0DP3Nt2IE/3plFzuaS96vihvD0Hd6H/q4WXUGpCxD/E8YrSXfNyRPbpTq+T8ZQioSuPA=="],
+
+    "@esbuild/android-x64": ["@esbuild/android-x64@0.19.12", "", { "os": "android", "cpu": "x64" }, "sha512-3k7ZoUW6Q6YqhdhIaq/WZ7HwBpnFBlW905Fa4s4qWJyiNOgT1dOqDiVAQFwBH7gBRZr17gLrlFCRzF6jFh7Kew=="],
+
+    "@esbuild/darwin-arm64": ["@esbuild/darwin-arm64@0.19.12", "", { "os": "darwin", "cpu": "arm64" }, "sha512-B6IeSgZgtEzGC42jsI+YYu9Z3HKRxp8ZT3cqhvliEHovq8HSX2YX8lNocDn79gCKJXOSaEot9MVYky7AKjCs8g=="],
+
+    "@esbuild/darwin-x64": ["@esbuild/darwin-x64@0.19.12", "", { "os": "darwin", "cpu": "x64" }, "sha512-hKoVkKzFiToTgn+41qGhsUJXFlIjxI/jSYeZf3ugemDYZldIXIxhvwN6erJGlX4t5h417iFuheZ7l+YVn05N3A=="],
+
+    "@esbuild/freebsd-arm64": ["@esbuild/freebsd-arm64@0.19.12", "", { "os": "freebsd", "cpu": "arm64" }, "sha512-4aRvFIXmwAcDBw9AueDQ2YnGmz5L6obe5kmPT8Vd+/+x/JMVKCgdcRwH6APrbpNXsPz+K653Qg8HB/oXvXVukA=="],
+
+    "@esbuild/freebsd-x64": ["@esbuild/freebsd-x64@0.19.12", "", { "os": "freebsd", "cpu": "x64" }, "sha512-EYoXZ4d8xtBoVN7CEwWY2IN4ho76xjYXqSXMNccFSx2lgqOG/1TBPW0yPx1bJZk94qu3tX0fycJeeQsKovA8gg=="],
+
+    "@esbuild/linux-arm": ["@esbuild/linux-arm@0.19.12", "", { "os": "linux", "cpu": "arm" }, "sha512-J5jPms//KhSNv+LO1S1TX1UWp1ucM6N6XuL6ITdKWElCu8wXP72l9MM0zDTzzeikVyqFE6U8YAV9/tFyj0ti+w=="],
+
+    "@esbuild/linux-arm64": ["@esbuild/linux-arm64@0.19.12", "", { "os": "linux", "cpu": "arm64" }, "sha512-EoTjyYyLuVPfdPLsGVVVC8a0p1BFFvtpQDB/YLEhaXyf/5bczaGeN15QkR+O4S5LeJ92Tqotve7i1jn35qwvdA=="],
+
+    "@esbuild/linux-ia32": ["@esbuild/linux-ia32@0.19.12", "", { "os": "linux", "cpu": "ia32" }, "sha512-Thsa42rrP1+UIGaWz47uydHSBOgTUnwBwNq59khgIwktK6x60Hivfbux9iNR0eHCHzOLjLMLfUMLCypBkZXMHA=="],
+
+    "@esbuild/linux-loong64": ["@esbuild/linux-loong64@0.19.12", "", { "os": "linux", "cpu": "none" }, "sha512-LiXdXA0s3IqRRjm6rV6XaWATScKAXjI4R4LoDlvO7+yQqFdlr1Bax62sRwkVvRIrwXxvtYEHHI4dm50jAXkuAA=="],
+
+    "@esbuild/linux-mips64el": ["@esbuild/linux-mips64el@0.19.12", "", { "os": "linux", "cpu": "none" }, "sha512-fEnAuj5VGTanfJ07ff0gOA6IPsvrVHLVb6Lyd1g2/ed67oU1eFzL0r9WL7ZzscD+/N6i3dWumGE1Un4f7Amf+w=="],
+
+    "@esbuild/linux-ppc64": ["@esbuild/linux-ppc64@0.19.12", "", { "os": "linux", "cpu": "ppc64" }, "sha512-nYJA2/QPimDQOh1rKWedNOe3Gfc8PabU7HT3iXWtNUbRzXS9+vgB0Fjaqr//XNbd82mCxHzik2qotuI89cfixg=="],
+
+    "@esbuild/linux-riscv64": ["@esbuild/linux-riscv64@0.19.12", "", { "os": "linux", "cpu": "none" }, "sha512-2MueBrlPQCw5dVJJpQdUYgeqIzDQgw3QtiAHUC4RBz9FXPrskyyU3VI1hw7C0BSKB9OduwSJ79FTCqtGMWqJHg=="],
+
+    "@esbuild/linux-s390x": ["@esbuild/linux-s390x@0.19.12", "", { "os": "linux", "cpu": "s390x" }, "sha512-+Pil1Nv3Umes4m3AZKqA2anfhJiVmNCYkPchwFJNEJN5QxmTs1uzyy4TvmDrCRNT2ApwSari7ZIgrPeUx4UZDg=="],
+
+    "@esbuild/linux-x64": ["@esbuild/linux-x64@0.19.12", "", { "os": "linux", "cpu": "x64" }, "sha512-B71g1QpxfwBvNrfyJdVDexenDIt1CiDN1TIXLbhOw0KhJzE78KIFGX6OJ9MrtC0oOqMWf+0xop4qEU8JrJTwCg=="],
+
+    "@esbuild/netbsd-x64": ["@esbuild/netbsd-x64@0.19.12", "", { "os": "none", "cpu": "x64" }, "sha512-3ltjQ7n1owJgFbuC61Oj++XhtzmymoCihNFgT84UAmJnxJfm4sYCiSLTXZtE00VWYpPMYc+ZQmB6xbSdVh0JWA=="],
+
+    "@esbuild/openbsd-x64": ["@esbuild/openbsd-x64@0.19.12", "", { "os": "openbsd", "cpu": "x64" }, "sha512-RbrfTB9SWsr0kWmb9srfF+L933uMDdu9BIzdA7os2t0TXhCRjrQyCeOt6wVxr79CKD4c+p+YhCj31HBkYcXebw=="],
+
+    "@esbuild/sunos-x64": ["@esbuild/sunos-x64@0.19.12", "", { "os": "sunos", "cpu": "x64" }, "sha512-HKjJwRrW8uWtCQnQOz9qcU3mUZhTUQvi56Q8DPTLLB+DawoiQdjsYq+j+D3s9I8VFtDr+F9CjgXKKC4ss89IeA=="],
+
+    "@esbuild/win32-arm64": ["@esbuild/win32-arm64@0.19.12", "", { "os": "win32", "cpu": "arm64" }, "sha512-URgtR1dJnmGvX864pn1B2YUYNzjmXkuJOIqG2HdU62MVS4EHpU2946OZoTMnRUHklGtJdJZ33QfzdjGACXhn1A=="],
+
+    "@esbuild/win32-ia32": ["@esbuild/win32-ia32@0.19.12", "", { "os": "win32", "cpu": "ia32" }, "sha512-+ZOE6pUkMOJfmxmBZElNOx72NKpIa/HFOMGzu8fqzQJ5kgf6aTGrcJaFsNiVMH4JKpMipyK+7k0n2UXN7a8YKQ=="],
+
+    "@esbuild/win32-x64": ["@esbuild/win32-x64@0.19.12", "", { "os": "win32", "cpu": "x64" }, "sha512-T1QyPSDCyMXaO3pzBkF96E8xMkiRYbUEZADd29SyPGabqxMViNoii+NcK7eWJAEoU6RZyEm5lVSIjTmcdoB9HA=="],
+
+    "@imacrayon/alpine-ajax": ["@imacrayon/alpine-ajax@0.10.5", "", {}, "sha512-Hk4+Smb6vP3K5HME51/2Q1npnI+heaOQd8Ic9JkS4UTXcRdvV/MhHdM038NCVY87Voktoa5Y7teQaLzfg5kCAw=="],
+
+    "@isaacs/cliui": ["@isaacs/cliui@8.0.2", "", { "dependencies": { "string-width": "^5.1.2", "string-width-cjs": "npm:string-width@^4.2.0", "strip-ansi": "^7.0.1", "strip-ansi-cjs": "npm:strip-ansi@^6.0.1", "wrap-ansi": "^8.1.0", "wrap-ansi-cjs": "npm:wrap-ansi@^7.0.0" } }, "sha512-O8jcjabXaleOG9DQ0+ARXWZBTfnP4WNAqzuiJK7ll44AmxGKv/J2M4TPjxjY3znBCfvBXFzucm1twdyFybFqEA=="],
+
+    "@jridgewell/gen-mapping": ["@jridgewell/gen-mapping@0.3.8", "", { "dependencies": { "@jridgewell/set-array": "^1.2.1", "@jridgewell/sourcemap-codec": "^1.4.10", "@jridgewell/trace-mapping": "^0.3.24" } }, "sha512-imAbBGkb+ebQyxKgzv5Hu2nmROxoDOXHh80evxdoXNOrvAnVx7zimzc1Oo5h9RlfV4vPXaE2iM5pOFbvOCClWA=="],
+
+    "@jridgewell/resolve-uri": ["@jridgewell/resolve-uri@3.1.2", "", {}, "sha512-bRISgCIjP20/tbWSPWMEi54QVPRZExkuD9lJL+UIxUKtwVJA8wW1Trb1jMs1RFXo1CBTNZ/5hpC9QvmKWdopKw=="],
+
+    "@jridgewell/set-array": ["@jridgewell/set-array@1.2.1", "", {}, "sha512-R8gLRTZeyp03ymzP/6Lil/28tGeGEzhx1q2k703KGWRAI1VdvPIXdG70VJc2pAMw3NA6JKL5hhFu1sJX0Mnn/A=="],
+
+    "@jridgewell/sourcemap-codec": ["@jridgewell/sourcemap-codec@1.5.0", "", {}, "sha512-gv3ZRaISU3fjPAgNsriBRqGWQL6quFx04YMPW/zD8XMLsU32mhCCbfbO6KZFLjvYpCZ8zyDEgqsgf+PwPaM7GQ=="],
+
+    "@jridgewell/trace-mapping": ["@jridgewell/trace-mapping@0.3.25", "", { "dependencies": { "@jridgewell/resolve-uri": "^3.1.0", "@jridgewell/sourcemap-codec": "^1.4.14" } }, "sha512-vNk6aEwybGtawWmy/PzwnGDOjCkLWSD2wqvjGGAgOAwCGWySYXfYoxt00IJkTF+8Lb57DwOb3Aa0o9CApepiYQ=="],
+
+    "@nodelib/fs.scandir": ["@nodelib/fs.scandir@2.1.5", "", { "dependencies": { "@nodelib/fs.stat": "2.0.5", "run-parallel": "^1.1.9" } }, "sha512-vq24Bq3ym5HEQm2NKCr3yXDwjc7vTsEThRDnkp2DK9p1uqLR+DHurm/NOTo0KG7HYHU7eppKZj3MyqYuMBf62g=="],
+
+    "@nodelib/fs.stat": ["@nodelib/fs.stat@2.0.5", "", {}, "sha512-RkhPPp2zrqDAQA/2jNhnztcPAlv64XdhIp7a7454A5ovI7Bukxgt7MX7udwAu3zg1DcpPU0rz3VV1SeaqvY4+A=="],
+
+    "@nodelib/fs.walk": ["@nodelib/fs.walk@1.2.8", "", { "dependencies": { "@nodelib/fs.scandir": "2.1.5", "fastq": "^1.6.0" } }, "sha512-oGB+UxlgWcgQkgwo8GcEGwemoTFt3FIO9ababBmaGwXIoBKZ+GTy0pP185beGg7Llih/NSHSV2XAs1lnznocSg=="],
+
+    "@pkgjs/parseargs": ["@pkgjs/parseargs@0.11.0", "", {}, "sha512-+1VkjdD0QBLPodGrJUeqarH8VAIvQODIbwh9XpP5Syisf7YoQgsJKPNFoqqLQlu+VQ/tVSshMR6loPMn8U+dPg=="],
+
+    "@tailwindcss/forms": ["@tailwindcss/forms@0.5.10", "", { "dependencies": { "mini-svg-data-uri": "^1.2.3" }, "peerDependencies": { "tailwindcss": ">=3.0.0 || >= 3.0.0-alpha.1 || >= 4.0.0-alpha.20 || >= 4.0.0-beta.1" } }, "sha512-utI1ONF6uf/pPNO68kmN1b8rEwNXv3czukalo8VtJH8ksIkZXr3Q3VYudZLkCsDd4Wku120uF02hYK25XGPorw=="],
+
+    "@tailwindcss/typography": ["@tailwindcss/typography@0.5.16", "", { "dependencies": { "lodash.castarray": "^4.4.0", "lodash.isplainobject": "^4.0.6", "lodash.merge": "^4.6.2", "postcss-selector-parser": "6.0.10" }, "peerDependencies": { "tailwindcss": ">=3.0.0 || insiders || >=4.0.0-alpha.20 || >=4.0.0-beta.1" } }, "sha512-0wDLwCVF5V3x3b1SGXPCDcdsbDHMBe+lkFzBRaHeLvNi+nrrnZ1lA18u+OTWO8iSWU2GxUOCvlXtDuqftc1oiA=="],
+
+    "@types/alpinejs": ["@types/alpinejs@3.13.11", "", {}, "sha512-3KhGkDixCPiLdL3Z/ok1GxHwLxEWqQOKJccgaQL01wc0EVM2tCTaqlC3NIedmxAXkVzt/V6VTM8qPgnOHKJ1MA=="],
+
+    "@vue/reactivity": ["@vue/reactivity@3.1.5", "", { "dependencies": { "@vue/shared": "3.1.5" } }, "sha512-1tdfLmNjWG6t/CsPldh+foumYFo3cpyCHgBYQ34ylaMsJ+SNHQ1kApMIa8jN+i593zQuaw3AdWH0nJTARzCFhg=="],
+
+    "@vue/shared": ["@vue/shared@3.1.5", "", {}, "sha512-oJ4F3TnvpXaQwZJNF3ZK+kLPHKarDmJjJ6jyzVNDKH9md1dptjC7lWR//jrGuLdek/U6iltWxqAnYOu8gCiOvA=="],
+
+    "alpinejs": ["alpinejs@3.14.9", "", { "dependencies": { "@vue/reactivity": "~3.1.1" } }, "sha512-gqSOhTEyryU9FhviNqiHBHzgjkvtukq9tevew29fTj+ofZtfsYriw4zPirHHOAy9bw8QoL3WGhyk7QqCh5AYlw=="],
+
+    "ansi-regex": ["ansi-regex@5.0.1", "", {}, "sha512-quJQXlTSUGL2LH9SUXo8VwsY4soanhgo6LNSm84E1LBcE8s3O0wpdiRzyR9z/ZZJMlMWv37qOOb9pdJlMUEKFQ=="],
+
+    "ansi-styles": ["ansi-styles@4.3.0", "", { "dependencies": { "color-convert": "^2.0.1" } }, "sha512-zbB9rCJAT1rbjiVDb2hqKFHNYLxgtk8NURxZ3IZwD3F6NtxbXZQCnnSi1Lkx+IDohdPlFp222wVALIheZJQSEg=="],
+
+    "any-promise": ["any-promise@1.3.0", "", {}, "sha512-7UvmKalWRt1wgjL1RrGxoSJW/0QZFIegpeGvZG9kjp8vrRu55XTHbwnqq2GpXm9uLbcuhxm3IqX9OB4MZR1b2A=="],
+
+    "anymatch": ["anymatch@3.1.3", "", { "dependencies": { "normalize-path": "^3.0.0", "picomatch": "^2.0.4" } }, "sha512-KMReFUr0B4t+D+OBkjR3KYqvocp2XaSzO55UcB6mgQMd3KbcE+mWTyvVV7D/zsdEbNnV6acZUutkiHQXvTr1Rw=="],
+
+    "arg": ["arg@5.0.2", "", {}, "sha512-PYjyFOLKQ9y57JvQ6QLo8dAgNqswh8M1RMJYdQduT6xbWSgK36P/Z/v+p888pM69jMMfS8Xd8F6I1kQ/I9HUGg=="],
+
+    "balanced-match": ["balanced-match@1.0.2", "", {}, "sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw=="],
+
+    "binary-extensions": ["binary-extensions@2.3.0", "", {}, "sha512-Ceh+7ox5qe7LJuLHoY0feh3pHuUDHAcRUeyL2VYghZwfpkNIy/+8Ocg0a3UuSoYzavmylwuLWQOf3hl0jjMMIw=="],
+
+    "brace-expansion": ["brace-expansion@2.0.2", "", { "dependencies": { "balanced-match": "^1.0.0" } }, "sha512-Jt0vHyM+jmUBqojB7E1NIYadt0vI0Qxjxd2TErW94wDz+E2LAm5vKMXXwg6ZZBTHPuUlDgQHKXvjGBdfcF1ZDQ=="],
+
+    "braces": ["braces@3.0.3", "", { "dependencies": { "fill-range": "^7.1.1" } }, "sha512-yQbXgO/OSZVD2IsiLlro+7Hf6Q18EJrKSEsdoMzKePKXct3gvD8oLcOQdIzGupr5Fj+EDe8gO/lxc1BzfMpxvA=="],
+
+    "camelcase-css": ["camelcase-css@2.0.1", "", {}, "sha512-QOSvevhslijgYwRx6Rv7zKdMF8lbRmx+uQGx2+vDc+KI/eBnsy9kit5aj23AgGu3pa4t9AgwbnXWqS+iOY+2aA=="],
+
+    "chalk": ["chalk@4.1.2", "", { "dependencies": { "ansi-styles": "^4.1.0", "supports-color": "^7.1.0" } }, "sha512-oKnbhFyRIXpUuez8iBMmyEa4nbj4IOQyuhc/wy9kY7/WVPcwIO9VA668Pu8RkO7+0G76SLROeyw9CpQ061i4mA=="],
+
+    "chokidar": ["chokidar@3.6.0", "", { "dependencies": { "anymatch": "~3.1.2", "braces": "~3.0.2", "glob-parent": "~5.1.2", "is-binary-path": "~2.1.0", "is-glob": "~4.0.1", "normalize-path": "~3.0.0", "readdirp": "~3.6.0" }, "optionalDependencies": { "fsevents": "~2.3.2" } }, "sha512-7VT13fmjotKpGipCW9JEQAusEPE+Ei8nl6/g4FBAmIm0GOOLMua9NDDo/DWp0ZAxCr3cPq5ZpBqmPAQgDda2Pw=="],
+
+    "cliui": ["cliui@8.0.1", "", { "dependencies": { "string-width": "^4.2.0", "strip-ansi": "^6.0.1", "wrap-ansi": "^7.0.0" } }, "sha512-BSeNnyus75C4//NQ9gQt1/csTXyo/8Sb+afLAkzAptFuMsod9HFokGNudZpi/oQV73hnVK+sR+5PVRMd+Dr7YQ=="],
+
+    "color-convert": ["color-convert@2.0.1", "", { "dependencies": { "color-name": "~1.1.4" } }, "sha512-RRECPsj7iu/xb5oKYcsFHSppFNnsj/52OVTRKb4zP5onXwVF3zVmmToNcOfGC+CRDpfK/U584fMg38ZHCaElKQ=="],
+
+    "color-name": ["color-name@1.1.4", "", {}, "sha512-dOy+3AuW3a2wNbZHIuMZpTcgjGuLU/uBL/ubcZF9OXbDo8ff4O8yVp5Bf0efS8uEoYo5q4Fx7dY9OgQGXgAsQA=="],
+
+    "commander": ["commander@4.1.1", "", {}, "sha512-NOKm8xhkzAjzFx8B2v5OAHT+u5pRQc2UCa2Vq9jYL/31o2wi9mxBA7LIFs3sV5VSC49z6pEhfbMULvShKj26WA=="],
+
+    "concurrently": ["concurrently@8.2.2", "", { "dependencies": { "chalk": "^4.1.2", "date-fns": "^2.30.0", "lodash": "^4.17.21", "rxjs": "^7.8.1", "shell-quote": "^1.8.1", "spawn-command": "0.0.2", "supports-color": "^8.1.1", "tree-kill": "^1.2.2", "yargs": "^17.7.2" }, "bin": { "conc": "dist/bin/concurrently.js", "concurrently": "dist/bin/concurrently.js" } }, "sha512-1dP4gpXFhei8IOtlXRE/T/4H88ElHgTiUzh71YUmtjTEHMSRS2Z/fgOxHSxxusGHogsRfxNq1vyAwxSC+EVyDg=="],
+
+    "cross-spawn": ["cross-spawn@7.0.6", "", { "dependencies": { "path-key": "^3.1.0", "shebang-command": "^2.0.0", "which": "^2.0.1" } }, "sha512-uV2QOWP2nWzsy2aMp8aRibhi9dlzF5Hgh5SHaB9OiTGEyDTiJJyx0uy51QXdyWbtAHNua4XJzUKca3OzKUd3vA=="],
+
+    "cssesc": ["cssesc@3.0.0", "", { "bin": { "cssesc": "bin/cssesc" } }, "sha512-/Tb/JcjK111nNScGob5MNtsntNM1aCNUDipB/TkwZFhyDrrE47SOx/18wF2bbjgc3ZzCSKW1T5nt5EbFoAz/Vg=="],
+
+    "date-fns": ["date-fns@2.30.0", "", { "dependencies": { "@babel/runtime": "^7.21.0" } }, "sha512-fnULvOpxnC5/Vg3NCiWelDsLiUc9bRwAPs/+LfTLNvetFCtCTN+yQz15C/fs4AwX1R9K5GLtLfn8QW+dWisaAw=="],
+
+    "didyoumean": ["didyoumean@1.2.2", "", {}, "sha512-gxtyfqMg7GKyhQmb056K7M3xszy/myH8w+B4RT+QXBQsvAOdc3XymqDDPHx1BgPgsdAA5SIifona89YtRATDzw=="],
+
+    "dlv": ["dlv@1.1.3", "", {}, "sha512-+HlytyjlPKnIG8XuRG8WvmBP8xs8P71y+SKKS6ZXWoEgLuePxtDoUEiH7WkdePWrQ5JBpE6aoVqfZfJUQkjXwA=="],
+
+    "eastasianwidth": ["eastasianwidth@0.2.0", "", {}, "sha512-I88TYZWc9XiYHRQ4/3c5rjjfgkjhLyW2luGIheGERbNQ6OY7yTybanSpDXZa8y7VUP9YmDcYa+eyq4ca7iLqWA=="],
+
+    "emoji-regex": ["emoji-regex@8.0.0", "", {}, "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A=="],
+
+    "esbuild": ["esbuild@0.19.12", "", { "optionalDependencies": { "@esbuild/aix-ppc64": "0.19.12", "@esbuild/android-arm": "0.19.12", "@esbuild/android-arm64": "0.19.12", "@esbuild/android-x64": "0.19.12", "@esbuild/darwin-arm64": "0.19.12", "@esbuild/darwin-x64": "0.19.12", "@esbuild/freebsd-arm64": "0.19.12", "@esbuild/freebsd-x64": "0.19.12", "@esbuild/linux-arm": "0.19.12", "@esbuild/linux-arm64": "0.19.12", "@esbuild/linux-ia32": "0.19.12", "@esbuild/linux-loong64": "0.19.12", "@esbuild/linux-mips64el": "0.19.12", "@esbuild/linux-ppc64": "0.19.12", "@esbuild/linux-riscv64": "0.19.12", "@esbuild/linux-s390x": "0.19.12", "@esbuild/linux-x64": "0.19.12", "@esbuild/netbsd-x64": "0.19.12", "@esbuild/openbsd-x64": "0.19.12", "@esbuild/sunos-x64": "0.19.12", "@esbuild/win32-arm64": "0.19.12", "@esbuild/win32-ia32": "0.19.12", "@esbuild/win32-x64": "0.19.12" }, "bin": { "esbuild": "bin/esbuild" } }, "sha512-aARqgq8roFBj054KvQr5f1sFu0D65G+miZRCuJyJ0G13Zwx7vRar5Zhn2tkQNzIXcBrNVsv/8stehpj+GAjgbg=="],
+
+    "escalade": ["escalade@3.2.0", "", {}, "sha512-WUj2qlxaQtO4g6Pq5c29GTcWGDyd8itL8zTlipgECz3JesAiiOKotd8JU6otB3PACgG6xkJUyVhboMS+bje/jA=="],
+
+    "fast-glob": ["fast-glob@3.3.3", "", { "dependencies": { "@nodelib/fs.stat": "^2.0.2", "@nodelib/fs.walk": "^1.2.3", "glob-parent": "^5.1.2", "merge2": "^1.3.0", "micromatch": "^4.0.8" } }, "sha512-7MptL8U0cqcFdzIzwOTHoilX9x5BrNqye7Z/LuC7kCMRio1EMSyqRK3BEAUD7sXRq4iT4AzTVuZdhgQ2TCvYLg=="],
+
+    "fastq": ["fastq@1.19.1", "", { "dependencies": { "reusify": "^1.0.4" } }, "sha512-GwLTyxkCXjXbxqIhTsMI2Nui8huMPtnxg7krajPJAjnEG/iiOS7i+zCtWGZR9G0NBKbXKh6X9m9UIsYX/N6vvQ=="],
+
+    "fill-range": ["fill-range@7.1.1", "", { "dependencies": { "to-regex-range": "^5.0.1" } }, "sha512-YsGpe3WHLK8ZYi4tWDg2Jy3ebRz2rXowDxnld4bkQB00cc/1Zw9AWnC0i9ztDJitivtQvaI9KaLyKrc+hBW0yg=="],
+
+    "focus-trap": ["focus-trap@6.9.4", "", { "dependencies": { "tabbable": "^5.3.3" } }, "sha512-v2NTsZe2FF59Y+sDykKY+XjqZ0cPfhq/hikWVL88BqLivnNiEffAsac6rP6H45ff9wG9LL5ToiDqrLEP9GX9mw=="],
+
+    "foreground-child": ["foreground-child@3.3.1", "", { "dependencies": { "cross-spawn": "^7.0.6", "signal-exit": "^4.0.1" } }, "sha512-gIXjKqtFuWEgzFRJA9WCQeSJLZDjgJUOMCMzxtvFq/37KojM1BFGufqsCy0r4qSQmYLsZYMeyRqzIWOMup03sw=="],
+
+    "fsevents": ["fsevents@2.3.3", "", { "os": "darwin" }, "sha512-5xoDfX+fL7faATnagmWPpbFtwh/R77WmMMqqHGS65C3vvB0YHrgF+B1YmZ3441tMj5n63k0212XNoJwzlhffQw=="],
+
+    "function-bind": ["function-bind@1.1.2", "", {}, "sha512-7XHNxH7qX9xG5mIwxkhumTox/MIRNcOgDrxWsMt2pAr23WHp6MrRlN7FBSFpCpr+oVO0F744iUgR82nJMfG2SA=="],
+
+    "get-caller-file": ["get-caller-file@2.0.5", "", {}, "sha512-DyFP3BM/3YHTQOCUL/w0OZHR0lpKeGrxotcHWcqNEdnltqFwXVfhEBQ94eIo34AfQpo0rGki4cyIiftY06h2Fg=="],
+
+    "glob": ["glob@10.4.5", "", { "dependencies": { "foreground-child": "^3.1.0", "jackspeak": "^3.1.2", "minimatch": "^9.0.4", "minipass": "^7.1.2", "package-json-from-dist": "^1.0.0", "path-scurry": "^1.11.1" }, "bin": { "glob": "dist/esm/bin.mjs" } }, "sha512-7Bv8RF0k6xjo7d4A/PxYLbUCfb6c+Vpd2/mB2yRDlew7Jb5hEXiCD9ibfO7wpk8i4sevK6DFny9h7EYbM3/sHg=="],
+
+    "glob-parent": ["glob-parent@6.0.2", "", { "dependencies": { "is-glob": "^4.0.3" } }, "sha512-XxwI8EOhVQgWp6iDL+3b0r86f4d6AX6zSU55HfB4ydCEuXLXc5FcYeOu+nnGftS4TEju/11rt4KJPTMgbfmv4A=="],
+
+    "has-flag": ["has-flag@4.0.0", "", {}, "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ=="],
+
+    "hasown": ["hasown@2.0.2", "", { "dependencies": { "function-bind": "^1.1.2" } }, "sha512-0hJU9SCPvmMzIBdZFqNPXWa6dqh7WdH0cII9y+CyS8rG3nL48Bclra9HmKhVVUHyPWNH5Y7xDwAB7bfgSjkUMQ=="],
+
+    "is-binary-path": ["is-binary-path@2.1.0", "", { "dependencies": { "binary-extensions": "^2.0.0" } }, "sha512-ZMERYes6pDydyuGidse7OsHxtbI7WVeUEozgR/g7rd0xUimYNlvZRE/K2MgZTjWy725IfelLeVcEM97mmtRGXw=="],
+
+    "is-core-module": ["is-core-module@2.16.1", "", { "dependencies": { "hasown": "^2.0.2" } }, "sha512-UfoeMA6fIJ8wTYFEUjelnaGI67v6+N7qXJEvQuIGa99l4xsCruSYOVSQ0uPANn4dAzm8lkYPaKLrrijLq7x23w=="],
+
+    "is-extglob": ["is-extglob@2.1.1", "", {}, "sha512-SbKbANkN603Vi4jEZv49LeVJMn4yGwsbzZworEoyEiutsN3nJYdbO36zfhGJ6QEDpOZIFkDtnq5JRxmvl3jsoQ=="],
+
+    "is-fullwidth-code-point": ["is-fullwidth-code-point@3.0.0", "", {}, "sha512-zymm5+u+sCsSWyD9qNaejV3DFvhCKclKdizYaJUuHA83RLjb7nSuGnddCHGv0hk+KY7BMAlsWeK4Ueg6EV6XQg=="],
+
+    "is-glob": ["is-glob@4.0.3", "", { "dependencies": { "is-extglob": "^2.1.1" } }, "sha512-xelSayHH36ZgE7ZWhli7pW34hNbNl8Ojv5KVmkJD4hBdD3th8Tfk9vYasLM+mXWOZhFkgZfxhLSnrwRr4elSSg=="],
+
+    "is-number": ["is-number@7.0.0", "", {}, "sha512-41Cifkg6e8TylSpdtTpeLVMqvSBEVzTttHvERD741+pnZ8ANv0004MRL43QKPDlK9cGvNp6NZWZUBlbGXYxxng=="],
+
+    "isexe": ["isexe@2.0.0", "", {}, "sha512-RHxMLp9lnKHGHRng9QFhRCMbYAcVpn69smSGcq3f36xjgVVWThj4qqLbTLlq7Ssj8B+fIQ1EuCEGI2lKsyQeIw=="],
+
+    "jackspeak": ["jackspeak@3.4.3", "", { "dependencies": { "@isaacs/cliui": "^8.0.2" }, "optionalDependencies": { "@pkgjs/parseargs": "^0.11.0" } }, "sha512-OGlZQpz2yfahA/Rd1Y8Cd9SIEsqvXkLVoSw/cgwhnhFMDbsQFeZYoJJ7bIZBS9BcamUW96asq/npPWugM+RQBw=="],
+
+    "jiti": ["jiti@1.21.7", "", { "bin": { "jiti": "bin/jiti.js" } }, "sha512-/imKNG4EbWNrVjoNC/1H5/9GFy+tqjGBHCaSsN+P2RnPqjsLmv6UD3Ej+Kj8nBWaRAwyk7kK5ZUc+OEatnTR3A=="],
+
+    "lilconfig": ["lilconfig@3.1.3", "", {}, "sha512-/vlFKAoH5Cgt3Ie+JLhRbwOsCQePABiU3tJ1egGvyQ+33R/vcwM2Zl2QR/LzjsBeItPt3oSVXapn+m4nQDvpzw=="],
+
+    "lines-and-columns": ["lines-and-columns@1.2.4", "", {}, "sha512-7ylylesZQ/PV29jhEDl3Ufjo6ZX7gCqJr5F7PKrqc93v7fzSymt1BpwEU8nAUXs8qzzvqhbjhK5QZg6Mt/HkBg=="],
+
+    "lodash": ["lodash@4.17.21", "", {}, "sha512-v2kDEe57lecTulaDIuNTPy3Ry4gLGJ6Z1O3vE1krgXZNrsQ+LFTGHVxVjcXPs17LhbZVGedAJv8XZ1tvj5FvSg=="],
+
+    "lodash.castarray": ["lodash.castarray@4.4.0", "", {}, "sha512-aVx8ztPv7/2ULbArGJ2Y42bG1mEQ5mGjpdvrbJcJFU3TbYybe+QlLS4pst9zV52ymy2in1KpFPiZnAOATxD4+Q=="],
+
+    "lodash.isplainobject": ["lodash.isplainobject@4.0.6", "", {}, "sha512-oSXzaWypCMHkPC3NvBEaPHf0KsA5mvPrOPgQWDsbg8n7orZ290M0BmC/jgRZ4vcJ6DTAhjrsSYgdsW/F+MFOBA=="],
+
+    "lodash.merge": ["lodash.merge@4.6.2", "", {}, "sha512-0KpjqXRVvrYyCsX1swR/XTK0va6VQkQM6MNo7PqW77ByjAhoARA8EfrP1N4+KlKj8YS0ZUCtRT/YUuhyYDujIQ=="],
+
+    "lru-cache": ["lru-cache@10.4.3", "", {}, "sha512-JNAzZcXrCt42VGLuYz0zfAzDfAvJWW6AfYlDBQyDV5DClI2m5sAmK+OIO7s59XfsRsWHp02jAJrRadPRGTt6SQ=="],
+
+    "merge2": ["merge2@1.4.1", "", {}, "sha512-8q7VEgMJW4J8tcfVPy8g09NcQwZdbwFEqhe/WZkoIzjn/3TGDwtOCYtXGxA3O8tPzpczCCDgv+P2P5y00ZJOOg=="],
+
+    "micromatch": ["micromatch@4.0.8", "", { "dependencies": { "braces": "^3.0.3", "picomatch": "^2.3.1" } }, "sha512-PXwfBhYu0hBCPw8Dn0E+WDYb7af3dSLVWKi3HGv84IdF4TyFoC0ysxFd0Goxw7nSv4T/PzEJQxsYsEiFCKo2BA=="],
+
+    "mini-svg-data-uri": ["mini-svg-data-uri@1.4.4", "", { "bin": { "mini-svg-data-uri": "cli.js" } }, "sha512-r9deDe9p5FJUPZAk3A59wGH7Ii9YrjjWw0jmw/liSbHl2CHiyXj6FcDXDu2K3TjVAXqiJdaw3xxwlZZr9E6nHg=="],
+
+    "minimatch": ["minimatch@9.0.5", "", { "dependencies": { "brace-expansion": "^2.0.1" } }, "sha512-G6T0ZX48xgozx7587koeX9Ys2NYy6Gmv//P89sEte9V9whIapMNF4idKxnW2QtCcLiTWlb/wfCabAtAFWhhBow=="],
+
+    "minipass": ["minipass@7.1.2", "", {}, "sha512-qOOzS1cBTWYF4BH8fVePDBOO9iptMnGUEZwNc/cMWnTV2nVLZ7VoNWEPHkYczZA0pdoA7dl6e7FL659nX9S2aw=="],
+
+    "mz": ["mz@2.7.0", "", { "dependencies": { "any-promise": "^1.0.0", "object-assign": "^4.0.1", "thenify-all": "^1.0.0" } }, "sha512-z81GNO7nnYMEhrGh9LeymoE4+Yr0Wn5McHIZMK5cfQCl+NDX08sCZgUc9/6MHni9IWuFLm1Z3HTCXu2z9fN62Q=="],
+
+    "nanoid": ["nanoid@3.3.11", "", { "bin": { "nanoid": "bin/nanoid.cjs" } }, "sha512-N8SpfPUnUp1bK+PMYW8qSWdl9U+wwNWI4QKxOYDy9JAro3WMX7p2OeVRF9v+347pnakNevPmiHhNmZ2HbFA76w=="],
+
+    "normalize-path": ["normalize-path@3.0.0", "", {}, "sha512-6eZs5Ls3WtCisHWp9S2GUy8dqkpGi4BVSz3GaqiE6ezub0512ESztXUwUB6C6IKbQkY2Pnb/mD4WYojCRwcwLA=="],
+
+    "object-assign": ["object-assign@4.1.1", "", {}, "sha512-rJgTQnkUnH1sFw8yT6VSU3zD3sWmu6sZhIseY8VX+GRu3P6F7Fu+JNDoXfklElbLJSnc3FUQHVe4cU5hj+BcUg=="],
+
+    "object-hash": ["object-hash@3.0.0", "", {}, "sha512-RSn9F68PjH9HqtltsSnqYC1XXoWe9Bju5+213R98cNGttag9q9yAOTzdbsqvIa7aNm5WffBZFpWYr2aWrklWAw=="],
+
+    "package-json-from-dist": ["package-json-from-dist@1.0.1", "", {}, "sha512-UEZIS3/by4OC8vL3P2dTXRETpebLI2NiI5vIrjaD/5UtrkFX/tNbwjTSRAGC/+7CAo2pIcBaRgWmcBBHcsaCIw=="],
+
+    "path-key": ["path-key@3.1.1", "", {}, "sha512-ojmeN0qd+y0jszEtoY48r0Peq5dwMEkIlCOu6Q5f41lfkswXuKtYrhgoTpLnyIcHm24Uhqx+5Tqm2InSwLhE6Q=="],
+
+    "path-parse": ["path-parse@1.0.7", "", {}, "sha512-LDJzPVEEEPR+y48z93A0Ed0yXb8pAByGWo/k5YYdYgpY2/2EsOsksJrq7lOHxryrVOn1ejG6oAp8ahvOIQD8sw=="],
+
+    "path-scurry": ["path-scurry@1.11.1", "", { "dependencies": { "lru-cache": "^10.2.0", "minipass": "^5.0.0 || ^6.0.2 || ^7.0.0" } }, "sha512-Xa4Nw17FS9ApQFJ9umLiJS4orGjm7ZzwUrwamcGQuHSzDyth9boKDaycYdDcZDuqYATXw4HFXgaqWTctW/v1HA=="],
+
+    "picocolors": ["picocolors@1.1.1", "", {}, "sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA=="],
+
+    "picomatch": ["picomatch@2.3.1", "", {}, "sha512-JU3teHTNjmE2VCGFzuY8EXzCDVwEqB2a8fsIvwaStHhAWJEeVd1o1QD80CU6+ZdEXXSLbSsuLwJjkCBWqRQUVA=="],
+
+    "pify": ["pify@2.3.0", "", {}, "sha512-udgsAY+fTnvv7kI7aaxbqwWNb0AHiB0qBO89PZKPkoTmGOgdbrHDKD+0B2X4uTfJ/FT1R09r9gTsjUjNJotuog=="],
+
+    "pirates": ["pirates@4.0.7", "", {}, "sha512-TfySrs/5nm8fQJDcBDuUng3VOUKsd7S+zqvbOTiGXHfxX4wK31ard+hoNuvkicM/2YFzlpDgABOevKSsB4G/FA=="],
+
+    "postcss": ["postcss@8.5.6", "", { "dependencies": { "nanoid": "^3.3.11", "picocolors": "^1.1.1", "source-map-js": "^1.2.1" } }, "sha512-3Ybi1tAuwAP9s0r1UQ2J4n5Y0G05bJkpUIO0/bI9MhwmD70S5aTWbXGBwxHrelT+XM1k6dM0pk+SwNkpTRN7Pg=="],
+
+    "postcss-import": ["postcss-import@15.1.0", "", { "dependencies": { "postcss-value-parser": "^4.0.0", "read-cache": "^1.0.0", "resolve": "^1.1.7" }, "peerDependencies": { "postcss": "^8.0.0" } }, "sha512-hpr+J05B2FVYUAXHeK1YyI267J/dDDhMU6B6civm8hSY1jYJnBXxzKDKDswzJmtLHryrjhnDjqqp/49t8FALew=="],
+
+    "postcss-js": ["postcss-js@4.0.1", "", { "dependencies": { "camelcase-css": "^2.0.1" }, "peerDependencies": { "postcss": "^8.4.21" } }, "sha512-dDLF8pEO191hJMtlHFPRa8xsizHaM82MLfNkUHdUtVEV3tgTp5oj+8qbEqYM57SLfc74KSbw//4SeJma2LRVIw=="],
+
+    "postcss-load-config": ["postcss-load-config@4.0.2", "", { "dependencies": { "lilconfig": "^3.0.0", "yaml": "^2.3.4" }, "peerDependencies": { "postcss": ">=8.0.9", "ts-node": ">=9.0.0" }, "optionalPeers": ["postcss", "ts-node"] }, "sha512-bSVhyJGL00wMVoPUzAVAnbEoWyqRxkjv64tUl427SKnPrENtq6hJwUojroMz2VB+Q1edmi4IfrAPpami5VVgMQ=="],
+
+    "postcss-nested": ["postcss-nested@6.2.0", "", { "dependencies": { "postcss-selector-parser": "^6.1.1" }, "peerDependencies": { "postcss": "^8.2.14" } }, "sha512-HQbt28KulC5AJzG+cZtj9kvKB93CFCdLvog1WFLf1D+xmMvPGlBstkpTEZfK5+AN9hfJocyBFCNiqyS48bpgzQ=="],
+
+    "postcss-selector-parser": ["postcss-selector-parser@6.0.10", "", { "dependencies": { "cssesc": "^3.0.0", "util-deprecate": "^1.0.2" } }, "sha512-IQ7TZdoaqbT+LCpShg46jnZVlhWD2w6iQYAcYXfHARZ7X1t/UGhhceQDs5X0cGqKvYlHNOuv7Oa1xmb0oQuA3w=="],
+
+    "postcss-value-parser": ["postcss-value-parser@4.2.0", "", {}, "sha512-1NNCs6uurfkVbeXG4S8JFT9t19m45ICnif8zWLd5oPSZ50QnwMfK+H3jv408d4jw/7Bttv5axS5IiHoLaVNHeQ=="],
+
+    "queue-microtask": ["queue-microtask@1.2.3", "", {}, "sha512-NuaNSa6flKT5JaSYQzJok04JzTL1CA6aGhv5rfLW3PgqA+M2ChpZQnAC8h8i4ZFkBS8X5RqkDBHA7r4hej3K9A=="],
+
+    "read-cache": ["read-cache@1.0.0", "", { "dependencies": { "pify": "^2.3.0" } }, "sha512-Owdv/Ft7IjOgm/i0xvNDZ1LrRANRfew4b2prF3OWMQLxLfu3bS8FVhCsrSCMK4lR56Y9ya+AThoTpDCTxCmpRA=="],
+
+    "readdirp": ["readdirp@3.6.0", "", { "dependencies": { "picomatch": "^2.2.1" } }, "sha512-hOS089on8RduqdbhvQ5Z37A0ESjsqz6qnRcffsMU3495FuTdqSm+7bhJ29JvIOsBDEEnan5DPu9t3To9VRlMzA=="],
+
+    "require-directory": ["require-directory@2.1.1", "", {}, "sha512-fGxEI7+wsG9xrvdjsrlmL22OMTTiHRwAMroiEeMgq8gzoLC/PQr7RsRDSTLUg/bZAZtF+TVIkHc6/4RIKrui+Q=="],
+
+    "resolve": ["resolve@1.22.10", "", { "dependencies": { "is-core-module": "^2.16.0", "path-parse": "^1.0.7", "supports-preserve-symlinks-flag": "^1.0.0" }, "bin": { "resolve": "bin/resolve" } }, "sha512-NPRy+/ncIMeDlTAsuqwKIiferiawhefFJtkNSW0qZJEqMEb+qBt/77B/jGeeek+F0uOeN05CDa6HXbbIgtVX4w=="],
+
+    "reusify": ["reusify@1.1.0", "", {}, "sha512-g6QUff04oZpHs0eG5p83rFLhHeV00ug/Yf9nZM6fLeUrPguBTkTQOdpAWWspMh55TZfVQDPaN3NQJfbVRAxdIw=="],
+
+    "run-parallel": ["run-parallel@1.2.0", "", { "dependencies": { "queue-microtask": "^1.2.2" } }, "sha512-5l4VyZR86LZ/lDxZTR6jqL8AFE2S0IFLMP26AbjsLVADxHdhB/c0GUsH+y39UfCi3dzz8OlQuPmnaJOMoDHQBA=="],
+
+    "rxjs": ["rxjs@7.8.2", "", { "dependencies": { "tslib": "^2.1.0" } }, "sha512-dhKf903U/PQZY6boNNtAGdWbG85WAbjT/1xYoZIC7FAY0yWapOBQVsVrDl58W86//e1VpMNBtRV4MaXfdMySFA=="],
+
+    "shebang-command": ["shebang-command@2.0.0", "", { "dependencies": { "shebang-regex": "^3.0.0" } }, "sha512-kHxr2zZpYtdmrN1qDjrrX/Z1rR1kG8Dx+gkpK1G4eXmvXswmcE1hTWBWYUzlraYw1/yZp6YuDY77YtvbN0dmDA=="],
+
+    "shebang-regex": ["shebang-regex@3.0.0", "", {}, "sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A=="],
+
+    "shell-quote": ["shell-quote@1.8.3", "", {}, "sha512-ObmnIF4hXNg1BqhnHmgbDETF8dLPCggZWBjkQfhZpbszZnYur5DUljTcCHii5LC3J5E0yeO/1LIMyH+UvHQgyw=="],
+
+    "signal-exit": ["signal-exit@4.1.0", "", {}, "sha512-bzyZ1e88w9O1iNJbKnOlvYTrWPDl46O1bG0D3XInv+9tkPrxrN8jUUTiFlDkkmKWgn1M6CfIA13SuGqOa9Korw=="],
+
+    "source-map-js": ["source-map-js@1.2.1", "", {}, "sha512-UXWMKhLOwVKb728IUtQPXxfYU+usdybtUrK/8uGE8CQMvrhOpwvzDBwj0QhSL7MQc7vIsISBG8VQ8+IDQxpfQA=="],
+
+    "spawn-command": ["spawn-command@0.0.2", "", {}, "sha512-zC8zGoGkmc8J9ndvml8Xksr1Amk9qBujgbF0JAIWO7kXr43w0h/0GJNM/Vustixu+YE8N/MTrQ7N31FvHUACxQ=="],
+
+    "string-width": ["string-width@4.2.3", "", { "dependencies": { "emoji-regex": "^8.0.0", "is-fullwidth-code-point": "^3.0.0", "strip-ansi": "^6.0.1" } }, "sha512-wKyQRQpjJ0sIp62ErSZdGsjMJWsap5oRNihHhu6G7JVO/9jIB6UyevL+tXuOqrng8j/cxKTWyWUwvSTriiZz/g=="],
+
+    "string-width-cjs": ["string-width@4.2.3", "", { "dependencies": { "emoji-regex": "^8.0.0", "is-fullwidth-code-point": "^3.0.0", "strip-ansi": "^6.0.1" } }, "sha512-wKyQRQpjJ0sIp62ErSZdGsjMJWsap5oRNihHhu6G7JVO/9jIB6UyevL+tXuOqrng8j/cxKTWyWUwvSTriiZz/g=="],
+
+    "strip-ansi": ["strip-ansi@6.0.1", "", { "dependencies": { "ansi-regex": "^5.0.1" } }, "sha512-Y38VPSHcqkFrCpFnQ9vuSXmquuv5oXOKpGeT6aGrr3o3Gc9AlVa6JBfUSOCnbxGGZF+/0ooI7KrPuUSztUdU5A=="],
+
+    "strip-ansi-cjs": ["strip-ansi@6.0.1", "", { "dependencies": { "ansi-regex": "^5.0.1" } }, "sha512-Y38VPSHcqkFrCpFnQ9vuSXmquuv5oXOKpGeT6aGrr3o3Gc9AlVa6JBfUSOCnbxGGZF+/0ooI7KrPuUSztUdU5A=="],
+
+    "sucrase": ["sucrase@3.35.0", "", { "dependencies": { "@jridgewell/gen-mapping": "^0.3.2", "commander": "^4.0.0", "glob": "^10.3.10", "lines-and-columns": "^1.1.6", "mz": "^2.7.0", "pirates": "^4.0.1", "ts-interface-checker": "^0.1.9" }, "bin": { "sucrase": "bin/sucrase", "sucrase-node": "bin/sucrase-node" } }, "sha512-8EbVDiu9iN/nESwxeSxDKe0dunta1GOlHufmSSXxMD2z2/tMZpDMpvXQGsc+ajGo8y2uYUmixaSRUc/QPoQ0GA=="],
+
+    "supports-color": ["supports-color@8.1.1", "", { "dependencies": { "has-flag": "^4.0.0" } }, "sha512-MpUEN2OodtUzxvKQl72cUF7RQ5EiHsGvSsVG0ia9c5RbWGL2CI4C7EpPS8UTBIplnlzZiNuV56w+FuNxy3ty2Q=="],
+
+    "supports-preserve-symlinks-flag": ["supports-preserve-symlinks-flag@1.0.0", "", {}, "sha512-ot0WnXS9fgdkgIcePe6RHNk1WA8+muPa6cSjeR3V8K27q9BB1rTE3R1p7Hv0z1ZyAc8s6Vvv8DIyWf681MAt0w=="],
+
+    "tabbable": ["tabbable@5.3.3", "", {}, "sha512-QD9qKY3StfbZqWOPLp0++pOrAVb/HbUi5xCc8cUo4XjP19808oaMiDzn0leBY5mCespIBM0CIZePzZjgzR83kA=="],
+
+    "tailwindcss": ["tailwindcss@3.4.17", "", { "dependencies": { "@alloc/quick-lru": "^5.2.0", "arg": "^5.0.2", "chokidar": "^3.6.0", "didyoumean": "^1.2.2", "dlv": "^1.1.3", "fast-glob": "^3.3.2", "glob-parent": "^6.0.2", "is-glob": "^4.0.3", "jiti": "^1.21.6", "lilconfig": "^3.1.3", "micromatch": "^4.0.8", "normalize-path": "^3.0.0", "object-hash": "^3.0.0", "picocolors": "^1.1.1", "postcss": "^8.4.47", "postcss-import": "^15.1.0", "postcss-js": "^4.0.1", "postcss-load-config": "^4.0.2", "postcss-nested": "^6.2.0", "postcss-selector-parser": "^6.1.2", "resolve": "^1.22.8", "sucrase": "^3.35.0" }, "bin": { "tailwind": "lib/cli.js", "tailwindcss": "lib/cli.js" } }, "sha512-w33E2aCvSDP0tW9RZuNXadXlkHXqFzSkQew/aIa2i/Sj8fThxwovwlXHSPXTbAHwEIhBFXAedUhP2tueAKP8Og=="],
+
+    "thenify": ["thenify@3.3.1", "", { "dependencies": { "any-promise": "^1.0.0" } }, "sha512-RVZSIV5IG10Hk3enotrhvz0T9em6cyHBLkH/YAZuKqd8hRkKhSfCGIcP2KUY0EPxndzANBmNllzWPwak+bheSw=="],
+
+    "thenify-all": ["thenify-all@1.6.0", "", { "dependencies": { "thenify": ">= 3.1.0 < 4" } }, "sha512-RNxQH/qI8/t3thXJDwcstUO4zeqo64+Uy/+sNVRBx4Xn2OX+OZ9oP+iJnNFqplFra2ZUVeKCSa2oVWi3T4uVmA=="],
+
+    "to-regex-range": ["to-regex-range@5.0.1", "", { "dependencies": { "is-number": "^7.0.0" } }, "sha512-65P7iz6X5yEr1cwcgvQxbbIw7Uk3gOy5dIdtZ4rDveLqhrdJP+Li/Hx6tyK0NEb+2GCyneCMJiGqrADCSNk8sQ=="],
+
+    "tree-kill": ["tree-kill@1.2.2", "", { "bin": { "tree-kill": "cli.js" } }, "sha512-L0Orpi8qGpRG//Nd+H90vFB+3iHnue1zSSGmNOOCh1GLJ7rUKVwV2HvijphGQS2UmhUZewS9VgvxYIdgr+fG1A=="],
+
+    "ts-interface-checker": ["ts-interface-checker@0.1.13", "", {}, "sha512-Y/arvbn+rrz3JCKl9C4kVNfTfSm2/mEp5FSz5EsZSANGPSlQrpRI5M4PKF+mJnE52jOO90PnPSc3Ur3bTQw0gA=="],
+
+    "tslib": ["tslib@2.8.1", "", {}, "sha512-oJFu94HQb+KVduSUQL7wnpmqnfmLsOA/nAh6b6EH0wCEoK0/mPeXU6c3wKDV83MkOuHPRHtSXKKU99IBazS/2w=="],
+
+    "typescript": ["typescript@5.8.3", "", { "bin": { "tsc": "bin/tsc", "tsserver": "bin/tsserver" } }, "sha512-p1diW6TqL9L07nNxvRMM7hMMw4c5XOo/1ibL4aAIGmSAt9slTE1Xgw5KWuof2uTOvCg9BY7ZRi+GaF+7sfgPeQ=="],
+
+    "util-deprecate": ["util-deprecate@1.0.2", "", {}, "sha512-EPD5q1uXyFxJpCrLnCc1nHnq3gOa6DZBocAIiI2TaSCA7VCJ1UJDMagCzIkXNsUYfD1daK//LTEQ8xiIbrHtcw=="],
+
+    "which": ["which@2.0.2", "", { "dependencies": { "isexe": "^2.0.0" }, "bin": { "node-which": "./bin/node-which" } }, "sha512-BLI3Tl1TW3Pvl70l3yq3Y64i+awpwXqsGBYWkkqMtnbXgrMD+yj7rhW0kuEDxzJaYXGjEW5ogapKNMEKNMjibA=="],
+
+    "wrap-ansi": ["wrap-ansi@7.0.0", "", { "dependencies": { "ansi-styles": "^4.0.0", "string-width": "^4.1.0", "strip-ansi": "^6.0.0" } }, "sha512-YVGIj2kamLSTxw6NsZjoBxfSwsn0ycdesmc4p+Q21c5zPuZ1pl+NfxVdxPtdHvmNVOQ6XSYG4AUtyt/Fi7D16Q=="],
+
+    "wrap-ansi-cjs": ["wrap-ansi@7.0.0", "", { "dependencies": { "ansi-styles": "^4.0.0", "string-width": "^4.1.0", "strip-ansi": "^6.0.0" } }, "sha512-YVGIj2kamLSTxw6NsZjoBxfSwsn0ycdesmc4p+Q21c5zPuZ1pl+NfxVdxPtdHvmNVOQ6XSYG4AUtyt/Fi7D16Q=="],
+
+    "y18n": ["y18n@5.0.8", "", {}, "sha512-0pfFzegeDWJHJIAmTLRP2DwHjdF5s7jo9tuztdQxAhINCdvS+3nGINqPd00AphqJR/0LhANUS6/+7SCb98YOfA=="],
+
+    "yaml": ["yaml@2.8.0", "", { "bin": { "yaml": "bin.mjs" } }, "sha512-4lLa/EcQCB0cJkyts+FpIRx5G/llPxfP6VQU5KByHEhLxY3IJCH0f0Hy1MHI8sClTvsIb8qwRJ6R/ZdlDJ/leQ=="],
+
+    "yargs": ["yargs@17.7.2", "", { "dependencies": { "cliui": "^8.0.1", "escalade": "^3.1.1", "get-caller-file": "^2.0.5", "require-directory": "^2.1.1", "string-width": "^4.2.3", "y18n": "^5.0.5", "yargs-parser": "^21.1.1" } }, "sha512-7dSzzRQ++CKnNI/krKnYRV7JKKPUXMEh61soaHKg9mrWEhzFWhFnxPxGl+69cD1Ou63C13NUPCnmIcrvqCuM6w=="],
+
+    "yargs-parser": ["yargs-parser@21.1.1", "", {}, "sha512-tVpsJW7DdjecAiFpbIB1e3qxIQsE6NoPc5/eTdrbbIC4h0LVsWhnoa3g+m2HclBIujHzsxZ4VJVA+GUuc2/LBw=="],
+
+    "@isaacs/cliui/string-width": ["string-width@5.1.2", "", { "dependencies": { "eastasianwidth": "^0.2.0", "emoji-regex": "^9.2.2", "strip-ansi": "^7.0.1" } }, "sha512-HnLOCR3vjcY8beoNLtcjZ5/nxn2afmME6lhrDrebokqMap+XbeW8n9TXpPDOqdGK5qcI3oT0GKTW6wC7EMiVqA=="],
+
+    "@isaacs/cliui/strip-ansi": ["strip-ansi@7.1.0", "", { "dependencies": { "ansi-regex": "^6.0.1" } }, "sha512-iq6eVVI64nQQTRYq2KtEg2d2uU7LElhTJwsH4YzIHZshxlgZms/wIc4VoDQTlG/IvVIrBKG06CrZnp0qv7hkcQ=="],
+
+    "@isaacs/cliui/wrap-ansi": ["wrap-ansi@8.1.0", "", { "dependencies": { "ansi-styles": "^6.1.0", "string-width": "^5.0.1", "strip-ansi": "^7.0.1" } }, "sha512-si7QWI6zUMq56bESFvagtmzMdGOtoxfR+Sez11Mobfc7tm+VkUckk9bW2UeffTGVUbOksxmSw0AA2gs8g71NCQ=="],
+
+    "chalk/supports-color": ["supports-color@7.2.0", "", { "dependencies": { "has-flag": "^4.0.0" } }, "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw=="],
+
+    "chokidar/glob-parent": ["glob-parent@5.1.2", "", { "dependencies": { "is-glob": "^4.0.1" } }, "sha512-AOIgSQCepiJYwP3ARnGx+5VnTu2HBYdzbGP45eLw1vr3zB3vZLeyed1sC9hnbcOc9/SrMyM5RPQrkGz4aS9Zow=="],
+
+    "fast-glob/glob-parent": ["glob-parent@5.1.2", "", { "dependencies": { "is-glob": "^4.0.1" } }, "sha512-AOIgSQCepiJYwP3ARnGx+5VnTu2HBYdzbGP45eLw1vr3zB3vZLeyed1sC9hnbcOc9/SrMyM5RPQrkGz4aS9Zow=="],
+
+    "postcss-nested/postcss-selector-parser": ["postcss-selector-parser@6.1.2", "", { "dependencies": { "cssesc": "^3.0.0", "util-deprecate": "^1.0.2" } }, "sha512-Q8qQfPiZ+THO/3ZrOrO0cJJKfpYCagtMUkXbnEfmgUjwXg6z/WBeOyS9APBBPCTSiDV+s4SwQGu8yFsiMRIudg=="],
+
+    "tailwindcss/postcss-selector-parser": ["postcss-selector-parser@6.1.2", "", { "dependencies": { "cssesc": "^3.0.0", "util-deprecate": "^1.0.2" } }, "sha512-Q8qQfPiZ+THO/3ZrOrO0cJJKfpYCagtMUkXbnEfmgUjwXg6z/WBeOyS9APBBPCTSiDV+s4SwQGu8yFsiMRIudg=="],
+
+    "@isaacs/cliui/string-width/emoji-regex": ["emoji-regex@9.2.2", "", {}, "sha512-L18DaJsXSUk2+42pv8mLs5jJT2hqFkFE4j21wOmgbUqsZ2hL72NsUU785g9RXgo3s0ZNgVl42TiHp3ZtOv/Vyg=="],
+
+    "@isaacs/cliui/strip-ansi/ansi-regex": ["ansi-regex@6.1.0", "", {}, "sha512-7HSX4QQb4CspciLpVFwyRe79O3xsIZDDLER21kERQ71oaPodF8jL725AgJMFAYbooIqolJoRLuM81SpeUkpkvA=="],
+
+    "@isaacs/cliui/wrap-ansi/ansi-styles": ["ansi-styles@6.2.1", "", {}, "sha512-bN798gFfQX+viw3R7yrGWRqnrN2oRkEkUjjl4JNn4E8GxxbjtG3FbrEIIY3l8/hrwUwIeCZvi4QuOTP4MErVug=="],
+  }
+}
diff --git a/templates/askama-shell/flake.lock b/templates/askama-shell/flake.lock
new file mode 100644
index 00000000..66b7c4e7
--- /dev/null
+++ b/templates/askama-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1750776420,
+        "narHash": "sha256-/CG+w0o0oJ5itVklOoLbdn2dGB0wbZVOoDm4np6w09A=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "30a61f056ac492e3b7cdcb69c1e6abdcf00e39cf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "rust-overlay": "rust-overlay"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1750991972,
+        "narHash": "sha256-jzadGZL1MtqmHb5AZcjZhHpNulOdMZPxf8Wifg8e5VA=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "b6509555d8ffaa0727f998af6ace901c5b78dc26",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/askama-shell/flake.nix b/templates/askama-shell/flake.nix
new file mode 100644
index 00000000..4059c69a
--- /dev/null
+++ b/templates/askama-shell/flake.nix
@@ -0,0 +1,79 @@
+{
+  description = "Rust Web Shell Template";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    rust-overlay = {
+      url = "github:oxalica/rust-overlay";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+  };
+
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+    rust-overlay,
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      overlays = [(import rust-overlay)];
+      pkgs = import nixpkgs {
+        inherit system overlays;
+      };
+
+      rustToolchain = pkgs.rust-bin.stable.latest.default.override {
+        extensions = ["rust-src" "rust-analyzer"];
+      };
+    in {
+      devShells.default = pkgs.mkShell {
+        buildInputs = with pkgs;
+          [
+            rustToolchain
+            cargo-watch
+            cargo-edit
+
+            # Node.js for TailwindCSS and TypeScript
+            bun
+            nodejs_20
+            nodePackages.npm
+            nodePackages.typescript
+            nodePackages.tailwindcss
+
+            # Database tools
+            sqlite
+            postgresql
+            tailwindcss
+
+            # Development tools
+            just
+            watchexec
+
+            # System dependencies
+            pkg-config
+            openssl
+            libiconv
+          ]
+          ++ lib.optionals stdenv.isDarwin [
+            darwin.apple_sdk.frameworks.Security
+            darwin.apple_sdk.frameworks.SystemConfiguration
+          ];
+
+        shellHook = ''
+          echo "🦀 Rust Web Shell Development Environment"
+          echo "📦 Rust version: $(rustc --version)"
+          echo "📦 Node version: $(node --version)"
+          echo ""
+          echo "Available commands:"
+          echo "  cargo run        - Run the development server"
+          echo "  cargo watch -x run - Auto-reload on changes"
+          echo "  just dev         - Development workflow"
+          echo "  just build       - Build for production"
+          echo ""
+        '';
+
+        RUST_LOG = "debug";
+        DATABASE_URL = "sqlite:app.db";
+      };
+    });
+}
diff --git a/templates/askama-shell/migrations/001_create_users_table.sql b/templates/askama-shell/migrations/001_create_users_table.sql
new file mode 100644
index 00000000..c4d623d6
--- /dev/null
+++ b/templates/askama-shell/migrations/001_create_users_table.sql
@@ -0,0 +1,17 @@
+-- Create users table
+CREATE TABLE IF NOT EXISTS users (
+    id TEXT PRIMARY KEY NOT NULL,
+    email TEXT UNIQUE NOT NULL,
+    username TEXT UNIQUE NOT NULL,
+    password_hash TEXT NOT NULL,
+    created_at DATETIME NOT NULL DEFAULT (datetime('now')),
+    updated_at DATETIME NOT NULL DEFAULT (datetime('now')),
+    email_verified BOOLEAN NOT NULL DEFAULT FALSE,
+    is_active BOOLEAN NOT NULL DEFAULT TRUE
+);
+
+-- Create indexes for better query performance
+CREATE INDEX IF NOT EXISTS idx_users_email ON users(email);
+CREATE INDEX IF NOT EXISTS idx_users_username ON users(username);
+CREATE INDEX IF NOT EXISTS idx_users_created_at ON users(created_at);
+CREATE INDEX IF NOT EXISTS idx_users_is_active ON users(is_active);
\ No newline at end of file
diff --git a/templates/askama-shell/package.json b/templates/askama-shell/package.json
new file mode 100644
index 00000000..f6b60f67
--- /dev/null
+++ b/templates/askama-shell/package.json
@@ -0,0 +1,35 @@
+{
+  "name": "rust-web-shell",
+  "version": "0.1.0",
+  "description": "Rust Web Application with TailwindCSS and Alpine.js",
+  "scripts": {
+    "build:css": "tailwindcss -i ./assets/styles/input.css -o ./assets/dist/output.css --minify",
+    "build:js": "esbuild assets/js/index.ts --bundle --minify --outfile=assets/dist/index.js",
+    "build": "npm run build:css && npm run build:js",
+    "watch:css": "tailwindcss -i ./assets/styles/input.css -o ./assets/dist/output.css --watch",
+    "watch:js": "esbuild assets/js/index.ts --bundle --watch --outfile=assets/dist/index.js",
+    "dev": "concurrently \"npm run watch:css\" \"npm run watch:js\"",
+    "postinstall": "npm run build"
+  },
+  "devDependencies": {
+    "@tailwindcss/forms": "^0.5.7",
+    "@tailwindcss/typography": "^0.5.10",
+    "@types/alpinejs": "^3.13.5",
+    "concurrently": "^8.2.2",
+    "esbuild": "^0.19.8",
+    "tailwindcss": "^3.3.6",
+    "typescript": "^5.3.2"
+  },
+  "dependencies": {
+    "@alpinejs/anchor": "^3.13.3",
+    "@alpinejs/collapse": "^3.13.3",
+    "@alpinejs/focus": "^3.13.3",
+    "@alpinejs/intersect": "^3.13.3",
+    "@alpinejs/mask": "^3.13.3",
+    "@alpinejs/morph": "^3.13.3",
+    "@alpinejs/persist": "^3.13.3",
+    "@alpinejs/resize": "^3.13.3",
+    "@imacrayon/alpine-ajax": "^0.10.1",
+    "alpinejs": "^3.13.3"
+  }
+}
\ No newline at end of file
diff --git a/templates/askama-shell/src/handlers/auth.rs b/templates/askama-shell/src/handlers/auth.rs
new file mode 100644
index 00000000..3f33209a
--- /dev/null
+++ b/templates/askama-shell/src/handlers/auth.rs
@@ -0,0 +1,316 @@
+use crate::models::{CreateUserRequest, LoginRequest, User, UserResponse};
+use argon2::password_hash::{SaltString, rand_core::OsRng};
+use argon2::{Argon2, PasswordHash, PasswordHasher, PasswordVerifier};
+use askama::Template;
+use axum::{
+    Json,
+    extract::{Query, State},
+    http::StatusCode,
+    response::{Html, IntoResponse, Redirect, Response},
+};
+use serde::{Deserialize, Serialize};
+use serde_json::json;
+use sqlx::SqlitePool;
+use std::collections::HashMap;
+use tower_sessions::Session;
+use validator::Validate;
+
+#[derive(Template)]
+#[template(path = "login.html")]
+struct LoginTemplate {
+    css: String,
+    js: String,
+    user: Option<UserResponse>,
+    flash_messages: Vec<FlashMessage>,
+}
+
+#[derive(Template)]
+#[template(path = "signup.html")]
+struct SignupTemplate {
+    css: String,
+    js: String,
+    user: Option<UserResponse>,
+    flash_messages: Vec<FlashMessage>,
+}
+
+#[derive(Debug, Serialize, Deserialize)]
+pub struct FlashMessage {
+    pub level: String,
+    pub content: String,
+}
+
+#[derive(Debug, Deserialize)]
+pub struct LoginQuery {
+    message: Option<String>,
+}
+
+// Helper function to get assets
+fn get_assets() -> (String, String) {
+    let css = include_str!(concat!(env!("OUT_DIR"), "/output.css"));
+    let js = include_str!(concat!(env!("OUT_DIR"), "/index.js"));
+    (css.to_string(), js.to_string())
+}
+
+// Helper function to get user from session
+pub async fn get_user_from_session(session: &Session, pool: &SqlitePool) -> Option<UserResponse> {
+    if let Ok(Some(user_id)) = session.get::<String>("user_id").await {
+        if let Ok(Some(user)) = User::find_by_id(pool, &user_id).await {
+            return Some(user.into());
+        }
+    }
+    None
+}
+
+// Helper function to hash password
+fn hash_password(password: &str) -> Result<String, argon2::password_hash::Error> {
+    let salt = SaltString::generate(&mut OsRng);
+    let argon2 = Argon2::default();
+    let password_hash = argon2.hash_password(password.as_bytes(), &salt)?;
+    Ok(password_hash.to_string())
+}
+
+// Helper function to verify password
+fn verify_password(password: &str, hash: &str) -> Result<bool, argon2::password_hash::Error> {
+    let parsed_hash = PasswordHash::new(hash)?;
+    let argon2 = Argon2::default();
+    Ok(argon2
+        .verify_password(password.as_bytes(), &parsed_hash)
+        .is_ok())
+}
+
+pub async fn show_login(
+    session: Session,
+    State(pool): State<SqlitePool>,
+    Query(query): Query<LoginQuery>,
+) -> Result<Html<String>, Response> {
+    let (css, js) = get_assets();
+    let user = get_user_from_session(&session, &pool).await;
+
+    // If user is already logged in, redirect to dashboard
+    if user.is_some() {
+        return Err(Redirect::to("/dashboard").into_response());
+    }
+
+    let mut flash_messages = Vec::new();
+    if let Some(message) = query.message {
+        flash_messages.push(FlashMessage {
+            level: "info".to_string(),
+            content: message,
+        });
+    }
+
+    let template = LoginTemplate {
+        css,
+        js,
+        user,
+        flash_messages,
+    };
+
+    match template.render() {
+        Ok(html) => Ok(Html(html)),
+        Err(e) => {
+            tracing::error!("Template render error: {}", e);
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Template error").into_response())
+        }
+    }
+}
+
+pub async fn handle_login(
+    session: Session,
+    State(pool): State<SqlitePool>,
+    Json(login_request): Json<LoginRequest>,
+) -> Result<Json<serde_json::Value>, Response> {
+    // Validate the request
+    if let Err(validation_errors) = login_request.validate() {
+        let mut errors = HashMap::new();
+        for (field, field_errors) in validation_errors.field_errors() {
+            let error_message = field_errors[0]
+                .message
+                .as_ref()
+                .map(|m| m.as_ref())
+                .unwrap_or("Invalid input");
+            errors.insert(field, error_message);
+        }
+        return Ok(Json(json!({
+            "success": false,
+            "errors": errors
+        })));
+    }
+
+    // Find user by email
+    let user = match User::find_by_email(&pool, &login_request.email).await {
+        Ok(Some(user)) => user,
+        Ok(None) => {
+            return Ok(Json(json!({
+                "success": false,
+                "message": "Invalid email or password"
+            })));
+        }
+        Err(e) => {
+            tracing::error!("Database error during login: {}", e);
+            return Err((StatusCode::INTERNAL_SERVER_ERROR, "Database error").into_response());
+        }
+    };
+
+    // Check if user is active
+    if !user.is_active {
+        return Ok(Json(json!({
+            "success": false,
+            "message": "Account is deactivated"
+        })));
+    }
+
+    // Verify password
+    match verify_password(&login_request.password, &user.password_hash) {
+        Ok(true) => {
+            // Password is correct, create session
+            if let Err(e) = session.insert("user_id", &user.id).await {
+                tracing::error!("Session error: {}", e);
+                return Err((StatusCode::INTERNAL_SERVER_ERROR, "Session error").into_response());
+            }
+
+            // Update last login
+            if let Err(e) = User::update_last_login(&pool, &user.id).await {
+                tracing::warn!("Failed to update last login for user {}: {}", user.id, e);
+            }
+
+            Ok(Json(json!({
+                "success": true,
+                "message": "Login successful",
+                "user": UserResponse::from(user)
+            })))
+        }
+        Ok(false) => Ok(Json(json!({
+            "success": false,
+            "message": "Invalid email or password"
+        }))),
+        Err(e) => {
+            tracing::error!("Password verification error: {}", e);
+            Err((
+                StatusCode::INTERNAL_SERVER_ERROR,
+                "Password verification error",
+            )
+                .into_response())
+        }
+    }
+}
+
+pub async fn show_signup(
+    session: Session,
+    State(pool): State<SqlitePool>,
+) -> Result<Html<String>, Response> {
+    let (css, js) = get_assets();
+    let user = get_user_from_session(&session, &pool).await;
+
+    // If user is already logged in, redirect to dashboard
+    if user.is_some() {
+        return Err(Redirect::to("/dashboard").into_response());
+    }
+
+    let template = SignupTemplate {
+        css,
+        js,
+        user,
+        flash_messages: Vec::new(),
+    };
+
+    match template.render() {
+        Ok(html) => Ok(Html(html)),
+        Err(e) => {
+            tracing::error!("Template render error: {}", e);
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Template error").into_response())
+        }
+    }
+}
+
+pub async fn handle_signup(
+    State(pool): State<SqlitePool>,
+    Json(signup_request): Json<CreateUserRequest>,
+) -> Result<Json<serde_json::Value>, Response> {
+    // Validate the request
+    if let Err(validation_errors) = signup_request.validate() {
+        let mut errors = HashMap::new();
+        for (field, field_errors) in validation_errors.field_errors() {
+            let error_message = field_errors[0]
+                .message
+                .as_ref()
+                .map(|m| m.as_ref())
+                .unwrap_or("Invalid input");
+            errors.insert(field, error_message);
+        }
+        return Ok(Json(json!({
+            "success": false,
+            "errors": errors
+        })));
+    }
+
+    // Check if user already exists
+    match User::find_by_email(&pool, &signup_request.email).await {
+        Ok(Some(_)) => {
+            return Ok(Json(json!({
+                "success": false,
+                "errors": {
+                    "email": "Email already exists"
+                }
+            })));
+        }
+        Ok(None) => {} // Good, user doesn't exist
+        Err(e) => {
+            tracing::error!("Database error checking existing user: {}", e);
+            return Err((StatusCode::INTERNAL_SERVER_ERROR, "Database error").into_response());
+        }
+    }
+
+    // Check if username already exists
+    match User::find_by_username(&pool, &signup_request.username).await {
+        Ok(Some(_)) => {
+            return Ok(Json(json!({
+                "success": false,
+                "errors": {
+                    "username": "Username already exists"
+                }
+            })));
+        }
+        Ok(None) => {} // Good, username doesn't exist
+        Err(e) => {
+            tracing::error!("Database error checking existing username: {}", e);
+            return Err((StatusCode::INTERNAL_SERVER_ERROR, "Database error").into_response());
+        }
+    }
+
+    // Hash the password
+    let password_hash = match hash_password(&signup_request.password) {
+        Ok(hash) => hash,
+        Err(e) => {
+            tracing::error!("Password hashing error: {}", e);
+            return Err(
+                (StatusCode::INTERNAL_SERVER_ERROR, "Password hashing error").into_response(),
+            );
+        }
+    };
+
+    // Create the user
+    match User::create(
+        &pool,
+        signup_request.email,
+        signup_request.username,
+        password_hash,
+    )
+    .await
+    {
+        Ok(user) => Ok(Json(json!({
+            "success": true,
+            "message": "Account created successfully",
+            "user": UserResponse::from(user)
+        }))),
+        Err(e) => {
+            tracing::error!("Database error creating user: {}", e);
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Database error").into_response())
+        }
+    }
+}
+
+pub async fn handle_logout(session: Session) -> Redirect {
+    let _ = session.delete().await;
+    Redirect::to("/")
+}
diff --git a/templates/askama-shell/src/handlers/dashboard.rs b/templates/askama-shell/src/handlers/dashboard.rs
new file mode 100644
index 00000000..80f6b5df
--- /dev/null
+++ b/templates/askama-shell/src/handlers/dashboard.rs
@@ -0,0 +1,134 @@
+use crate::handlers::auth::{FlashMessage, get_user_from_session};
+use crate::models::UserResponse;
+use askama::Template;
+use axum::{
+    extract::State,
+    http::StatusCode,
+    response::{Html, IntoResponse, Redirect, Response},
+};
+use rand::{Rng, distributions::Alphanumeric};
+use sqlx::SqlitePool;
+use tower_sessions::Session;
+
+#[derive(Template)]
+#[template(path = "dashboard.html")]
+struct DashboardTemplate {
+    css: String,
+    js: String,
+    user: Option<UserResponse>,
+    dashboard_user: DashboardUser,
+    flash_messages: Vec<FlashMessage>,
+    csrf_token: String,
+}
+
+#[derive(Debug)]
+struct DashboardUser {
+    pub email: String,
+    pub username: String,
+    pub email_verified: bool,
+    pub created_at_formatted: String,
+    pub updated_at_formatted: String,
+    pub created_at_full: String,
+    pub updated_at_full: String,
+}
+
+// Helper function to get assets
+fn get_assets() -> (String, String) {
+    let css = include_str!(concat!(env!("OUT_DIR"), "/output.css"));
+    let js = include_str!(concat!(env!("OUT_DIR"), "/index.js"));
+    (css.to_string(), js.to_string())
+}
+
+// Generate a cryptographically secure CSRF token
+fn generate_csrf_token() -> String {
+    rand::thread_rng()
+        .sample_iter(&Alphanumeric)
+        .take(32)
+        .map(char::from)
+        .collect()
+}
+
+// Get or create CSRF token from session
+async fn get_or_create_csrf_token(session: &Session) -> Result<String, Response> {
+    // Try to get existing token from session
+    if let Ok(Some(token)) = session.get::<String>("csrf_token").await {
+        return Ok(token);
+    }
+
+    // Generate new token and store in session
+    let token = generate_csrf_token();
+    if let Err(_) = session.insert("csrf_token", &token).await {
+        tracing::error!("Failed to store CSRF token in session");
+        return Err((StatusCode::INTERNAL_SERVER_ERROR, "Session error").into_response());
+    }
+
+    Ok(token)
+}
+
+// Validate CSRF token from request against session
+pub async fn validate_csrf_token(
+    session: &Session,
+    provided_token: &str,
+) -> Result<bool, Response> {
+    match session.get::<String>("csrf_token").await {
+        Ok(Some(session_token)) => Ok(session_token == provided_token),
+        Ok(None) => Ok(false), // No token in session
+        Err(_) => {
+            tracing::error!("Failed to retrieve CSRF token from session");
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Session error").into_response())
+        }
+    }
+}
+
+pub async fn show_dashboard(
+    session: Session,
+    State(pool): State<SqlitePool>,
+) -> Result<Html<String>, Response> {
+    let (css, js) = get_assets();
+
+    // Get user from session
+    let user_response = match get_user_from_session(&session, &pool).await {
+        Some(user) => user,
+        None => {
+            // User not logged in, redirect to login
+            return Err(Redirect::to("/login").into_response());
+        }
+    };
+
+    // Get or create CSRF token
+    let csrf_token = get_or_create_csrf_token(&session).await?;
+
+    // Convert to dashboard user with formatted dates
+    let dashboard_user = DashboardUser {
+        email: user_response.email.clone(),
+        username: user_response.username.clone(),
+        email_verified: user_response.email_verified,
+        created_at_formatted: user_response.created_at.format("%b %d, %Y").to_string(),
+        updated_at_formatted: user_response.updated_at.format("%b %d, %Y").to_string(),
+        created_at_full: user_response
+            .created_at
+            .format("%b %d, %Y at %I:%M %p")
+            .to_string(),
+        updated_at_full: user_response
+            .updated_at
+            .format("%b %d, %Y at %I:%M %p")
+            .to_string(),
+    };
+
+    let template = DashboardTemplate {
+        css,
+        js,
+        user: Some(user_response),
+        dashboard_user,
+        flash_messages: Vec::new(),
+        csrf_token,
+    };
+
+    match template.render() {
+        Ok(html) => Ok(Html(html)),
+        Err(e) => {
+            tracing::error!("Template render error: {}", e);
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Template error").into_response())
+        }
+    }
+}
diff --git a/templates/askama-shell/src/handlers/mod.rs b/templates/askama-shell/src/handlers/mod.rs
new file mode 100644
index 00000000..ac478a65
--- /dev/null
+++ b/templates/askama-shell/src/handlers/mod.rs
@@ -0,0 +1,7 @@
+pub mod auth;
+pub mod dashboard;
+pub mod pages;
+
+pub use auth::*;
+pub use dashboard::*;
+pub use pages::*;
diff --git a/templates/askama-shell/src/handlers/pages.rs b/templates/askama-shell/src/handlers/pages.rs
new file mode 100644
index 00000000..57868db7
--- /dev/null
+++ b/templates/askama-shell/src/handlers/pages.rs
@@ -0,0 +1,49 @@
+use crate::handlers::auth::{FlashMessage, get_user_from_session};
+use crate::models::UserResponse;
+use askama::Template;
+use axum::{
+    extract::State,
+    http::StatusCode,
+    response::{Html, IntoResponse, Response},
+};
+use sqlx::SqlitePool;
+use tower_sessions::Session;
+
+#[derive(Template)]
+#[template(path = "index.html")]
+struct IndexTemplate {
+    css: String,
+    js: String,
+    user: Option<UserResponse>,
+    flash_messages: Vec<FlashMessage>,
+}
+
+// Helper function to get assets
+fn get_assets() -> (String, String) {
+    let css = include_str!(concat!(env!("OUT_DIR"), "/output.css"));
+    let js = include_str!(concat!(env!("OUT_DIR"), "/index.js"));
+    (css.to_string(), js.to_string())
+}
+
+pub async fn show_index(
+    session: Session,
+    State(pool): State<SqlitePool>,
+) -> Result<Html<String>, Response> {
+    let (css, js) = get_assets();
+    let user = get_user_from_session(&session, &pool).await;
+
+    let template = IndexTemplate {
+        css,
+        js,
+        user,
+        flash_messages: Vec::new(),
+    };
+
+    match template.render() {
+        Ok(html) => Ok(Html(html)),
+        Err(e) => {
+            tracing::error!("Template render error: {}", e);
+            Err((StatusCode::INTERNAL_SERVER_ERROR, "Template error").into_response())
+        }
+    }
+}
diff --git a/templates/askama-shell/src/lib.rs b/templates/askama-shell/src/lib.rs
new file mode 100644
index 00000000..2512dae3
--- /dev/null
+++ b/templates/askama-shell/src/lib.rs
@@ -0,0 +1,51 @@
+pub mod handlers;
+pub mod models;
+
+use axum::{
+    Router,
+    http::StatusCode,
+    routing::{get, post},
+};
+use sqlx::SqlitePool;
+use tower_http::{cors::CorsLayer, trace::TraceLayer};
+use tower_sessions::cookie::time::Duration;
+use tower_sessions::{Expiry, MemoryStore, SessionManagerLayer};
+
+pub async fn create_app(pool: SqlitePool) -> Router {
+    // Create session store
+    let session_store = MemoryStore::default();
+    let session_layer = SessionManagerLayer::new(session_store)
+        .with_secure(false)
+        .with_expiry(Expiry::OnInactivity(Duration::weeks(1))); // 7 days
+
+    Router::new()
+        // Pages
+        .route("/", get(handlers::show_index))
+        .route("/login", get(handlers::show_login))
+        .route("/signup", get(handlers::show_signup))
+        .route("/dashboard", get(handlers::show_dashboard))
+        // Auth endpoints
+        .route("/login", post(handlers::handle_login))
+        .route("/signup", post(handlers::handle_signup))
+        .route("/logout", post(handlers::handle_logout))
+        // Fallback for 404
+        .fallback(fallback_handler)
+        // Middleware
+        .layer(TraceLayer::new_for_http())
+        .layer(CorsLayer::permissive())
+        .layer(session_layer)
+        .with_state(pool)
+}
+
+async fn fallback_handler() -> (StatusCode, &'static str) {
+    (StatusCode::NOT_FOUND, "Not Found")
+}
+
+pub async fn setup_database(database_url: &str) -> Result<SqlitePool, sqlx::Error> {
+    let pool = SqlitePool::connect(database_url).await?;
+
+    // Run migrations
+    sqlx::migrate!("./migrations").run(&pool).await?;
+
+    Ok(pool)
+}
diff --git a/templates/askama-shell/src/main.rs b/templates/askama-shell/src/main.rs
new file mode 100644
index 00000000..bf090886
--- /dev/null
+++ b/templates/askama-shell/src/main.rs
@@ -0,0 +1,54 @@
+use rust_web_shell::{create_app, setup_database};
+use std::env;
+use tracing_subscriber::{layer::SubscriberExt, util::SubscriberInitExt};
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    // Initialize tracing
+    tracing_subscriber::registry()
+        .with(
+            tracing_subscriber::EnvFilter::try_from_default_env().unwrap_or_else(|_| {
+                "rust_web_shell=debug,tower_http=debug,axum::rejection=trace".into()
+            }),
+        )
+        .with(tracing_subscriber::fmt::layer())
+        .init();
+
+    // Load environment variables
+    dotenvy::dotenv().ok();
+
+    // Get configuration from environment
+    let database_url = env::var("DATABASE_URL").unwrap_or_else(|_| "sqlite:app.db".to_string());
+
+    let host = env::var("HOST").unwrap_or_else(|_| "127.0.0.1".to_string());
+
+    let port = env::var("PORT")
+        .unwrap_or_else(|_| "3000".to_string())
+        .parse::<u16>()
+        .expect("PORT must be a valid number");
+
+    // Set up database
+    tracing::info!("Connecting to database: {}", database_url);
+    let pool = setup_database(&database_url).await?;
+    tracing::info!("Database connected and migrations applied");
+
+    // Create the application
+    let app = create_app(pool).await;
+
+    // Create the listener
+    let listener = tokio::net::TcpListener::bind(format!("{}:{}", host, port)).await?;
+
+    tracing::info!(
+        "🦀 Rust Web Shell server starting on http://{}:{}",
+        host,
+        port
+    );
+    tracing::info!("📱 Dashboard: http://{}:{}/dashboard", host, port);
+    tracing::info!("🔐 Login: http://{}:{}/login", host, port);
+    tracing::info!("📝 Signup: http://{}:{}/signup", host, port);
+
+    // Start the server
+    axum::serve(listener, app).await?;
+
+    Ok(())
+}
diff --git a/templates/askama-shell/src/models/mod.rs b/templates/askama-shell/src/models/mod.rs
new file mode 100644
index 00000000..3232c864
--- /dev/null
+++ b/templates/askama-shell/src/models/mod.rs
@@ -0,0 +1,3 @@
+pub mod user;
+
+pub use user::*;
diff --git a/templates/askama-shell/src/models/user.rs b/templates/askama-shell/src/models/user.rs
new file mode 100644
index 00000000..e2c28ce3
--- /dev/null
+++ b/templates/askama-shell/src/models/user.rs
@@ -0,0 +1,159 @@
+use chrono::{DateTime, Utc};
+use serde::{Deserialize, Serialize};
+use sqlx::{FromRow, SqlitePool};
+use uuid::Uuid;
+use validator::Validate;
+
+#[derive(Debug, Clone, Serialize, Deserialize, FromRow)]
+pub struct User {
+    pub id: String,
+    pub email: String,
+    pub username: String,
+    pub password_hash: String,
+    pub created_at: DateTime<Utc>,
+    pub updated_at: DateTime<Utc>,
+    pub email_verified: bool,
+    pub is_active: bool,
+}
+
+#[derive(Debug, Serialize, Deserialize, Validate)]
+pub struct CreateUserRequest {
+    #[validate(email)]
+    pub email: String,
+
+    #[validate(length(min = 3, max = 50))]
+    pub username: String,
+
+    #[validate(length(min = 8, max = 128))]
+    pub password: String,
+
+    #[validate(must_match(other = "password"))]
+    pub confirm_password: String,
+}
+
+#[derive(Debug, Serialize, Deserialize, Validate)]
+pub struct LoginRequest {
+    #[validate(email)]
+    pub email: String,
+
+    #[validate(length(min = 1))]
+    pub password: String,
+}
+
+#[derive(Debug, Serialize, Deserialize)]
+pub struct UserResponse {
+    pub id: String,
+    pub email: String,
+    pub username: String,
+    pub created_at: DateTime<Utc>,
+    pub updated_at: DateTime<Utc>,
+    pub email_verified: bool,
+}
+
+impl From<User> for UserResponse {
+    fn from(user: User) -> Self {
+        Self {
+            id: user.id,
+            email: user.email,
+            username: user.username,
+            created_at: user.created_at,
+            updated_at: user.updated_at,
+            email_verified: user.email_verified,
+        }
+    }
+}
+
+impl User {
+    pub async fn create(
+        pool: &SqlitePool,
+        email: String,
+        username: String,
+        password_hash: String,
+    ) -> Result<User, sqlx::Error> {
+        let id = Uuid::new_v4().to_string();
+        let now = Utc::now();
+
+        let user = sqlx::query_as::<_, User>(
+            r#"
+            INSERT INTO users (id, email, username, password_hash, created_at, updated_at, email_verified, is_active)
+            VALUES (?1, ?2, ?3, ?4, ?5, ?6, ?7, ?8)
+            RETURNING *
+            "#,
+        )
+        .bind(&id)
+        .bind(&email)
+        .bind(&username)
+        .bind(&password_hash)
+        .bind(now)
+        .bind(now)
+        .bind(false)
+        .bind(true)
+        .fetch_one(pool)
+        .await?;
+
+        Ok(user)
+    }
+
+    pub async fn find_by_email(
+        pool: &SqlitePool,
+        email: &str,
+    ) -> Result<Option<User>, sqlx::Error> {
+        let user = sqlx::query_as::<_, User>("SELECT * FROM users WHERE email = ?1")
+            .bind(email)
+            .fetch_optional(pool)
+            .await?;
+
+        Ok(user)
+    }
+
+    pub async fn find_by_id(pool: &SqlitePool, id: &str) -> Result<Option<User>, sqlx::Error> {
+        let user = sqlx::query_as::<_, User>("SELECT * FROM users WHERE id = ?1")
+            .bind(id)
+            .fetch_optional(pool)
+            .await?;
+
+        Ok(user)
+    }
+
+    pub async fn find_by_username(
+        pool: &SqlitePool,
+        username: &str,
+    ) -> Result<Option<User>, sqlx::Error> {
+        let user = sqlx::query_as::<_, User>("SELECT * FROM users WHERE username = ?1")
+            .bind(username)
+            .fetch_optional(pool)
+            .await?;
+
+        Ok(user)
+    }
+
+    pub async fn update_last_login(pool: &SqlitePool, id: &str) -> Result<(), sqlx::Error> {
+        sqlx::query("UPDATE users SET updated_at = ?1 WHERE id = ?2")
+            .bind(Utc::now())
+            .bind(id)
+            .execute(pool)
+            .await?;
+
+        Ok(())
+    }
+
+    pub async fn verify_email(pool: &SqlitePool, id: &str) -> Result<(), sqlx::Error> {
+        sqlx::query("UPDATE users SET email_verified = TRUE, updated_at = ?1 WHERE id = ?2")
+            .bind(Utc::now())
+            .bind(id)
+            .execute(pool)
+            .await?;
+
+        Ok(())
+    }
+
+    pub async fn deactivate(pool: &SqlitePool, id: &str) -> Result<(), sqlx::Error> {
+        sqlx::query("UPDATE users SET is_active = FALSE, updated_at = ?1 WHERE id = ?2")
+            .bind(Utc::now())
+            .bind(id)
+            .execute(pool)
+            .await?;
+
+        Ok(())
+    }
+}
diff --git a/templates/askama-shell/tailwind.config.js b/templates/askama-shell/tailwind.config.js
new file mode 100644
index 00000000..9faa3482
--- /dev/null
+++ b/templates/askama-shell/tailwind.config.js
@@ -0,0 +1,27 @@
+/** @type {import('tailwindcss').Config} */
+module.exports = {
+  content: [
+    "./templates/**/*.html",
+    "./src/**/*.rs",
+    "./assets/js/**/*.{js,ts}",
+  ],
+  theme: {
+    extend: {
+      colors: {
+        primary: {
+          50: '#eff6ff',
+          500: '#3b82f6',
+          600: '#2563eb',
+          700: '#1d4ed8',
+        }
+      },
+      fontFamily: {
+        sans: ['Inter', 'system-ui', 'sans-serif'],
+      },
+    },
+  },
+  plugins: [
+    require('@tailwindcss/forms'),
+    require('@tailwindcss/typography'),
+  ],
+}
\ No newline at end of file
diff --git a/templates/askama-shell/templates/base.html b/templates/askama-shell/templates/base.html
new file mode 100644
index 00000000..450e7f2c
--- /dev/null
+++ b/templates/askama-shell/templates/base.html
@@ -0,0 +1,86 @@
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>{% block title %}Rust Web Shell{% endblock %}</title>
+    
+    <!-- TailwindCSS -->
+    <style>{{ css|safe }}</style>
+    
+    <!-- Fonts -->
+    <link rel="preconnect" href="https://fonts.googleapis.com">
+    <link rel="preconnect" href="https://fonts.gstatic.com" crossorigin>
+    <link href="https://fonts.googleapis.com/css2?family=Inter:wght@300;400;500;600;700&display=swap" rel="stylesheet">
+    
+    <!-- Alpine.js will be included via our bundled JavaScript -->
+    <script defer>{{ js|safe }}</script>
+    
+    {% block head %}{% endblock %}
+</head>
+<body class="bg-gray-50 font-sans antialiased">
+    <!-- Navigation -->
+    <nav class="bg-white shadow-sm border-b border-gray-200">
+        <div class="max-w-7xl mx-auto px-4 sm:px-6 lg:px-8">
+            <div class="flex justify-between h-16">
+                <div class="flex items-center">
+                    <a href="/" class="text-2xl font-bold text-gray-900">
+                        🦀 Rust Web Shell
+                    </a>
+                </div>
+                
+                <div class="flex items-center space-x-4">
+                    {% match user %}
+                        {% when Some with (u) %}
+                            <span class="text-sm text-gray-700">Welcome, {{ u.username }}!</span>
+                            <a href="/dashboard" class="btn btn-secondary">Dashboard</a>
+                            <form action="/logout" method="post" class="inline">
+                                <button type="submit" class="text-sm text-gray-500 hover:text-gray-700">
+                                    Logout
+                                </button>
+                            </form>
+                        {% when None %}
+                            <a href="/login" class="text-sm text-gray-700 hover:text-gray-900">Login</a>
+                            <a href="/signup" class="btn btn-primary">Sign Up</a>
+                    {% endmatch %}
+                </div>
+            </div>
+        </div>
+    </nav>
+
+    <!-- Flash Messages -->
+    {% if !flash_messages.is_empty() %}
+        <div class="max-w-7xl mx-auto px-4 sm:px-6 lg:px-8 pt-4">
+            {% for message in flash_messages %}
+                <div class="alert alert-{{ message.level }} mb-4" 
+                     x-data="{ show: true }" 
+                     x-show="show" 
+                     x-transition>
+                    <div class="flex justify-between items-center">
+                        <span>{{ message.content }}</span>
+                        <button @click="show = false" class="ml-4 text-sm opacity-70 hover:opacity-100">
+                            ✕
+                        </button>
+                    </div>
+                </div>
+            {% endfor %}
+        </div>
+    {% endif %}
+
+    <!-- Main Content -->
+    <main class="max-w-7xl mx-auto py-6 sm:px-6 lg:px-8">
+        {% block content %}{% endblock %}
+    </main>
+
+    <!-- Footer -->
+    <footer class="bg-white border-t border-gray-200 mt-12">
+        <div class="max-w-7xl mx-auto py-6 px-4 sm:px-6 lg:px-8">
+            <div class="text-center text-sm text-gray-500">
+                Built with 🦀 Rust, Axum, TailwindCSS, and Alpine.js
+            </div>
+        </div>
+    </footer>
+
+    {% block scripts %}{% endblock %}
+</body>
+</html>
\ No newline at end of file
diff --git a/templates/askama-shell/templates/dashboard.html b/templates/askama-shell/templates/dashboard.html
new file mode 100644
index 00000000..0756e549
--- /dev/null
+++ b/templates/askama-shell/templates/dashboard.html
@@ -0,0 +1,385 @@
+{% extends "base.html" %}
+
+{% block title %}Dashboard - Rust Web Shell{% endblock %}
+
+{% block head %}
+<meta name="csrf-token" content="{{ csrf_token }}">
+{% endblock %}
+
+{% block content %}
+<div class="px-4 sm:px-6 lg:px-8">
+    <!-- Page header -->
+    <div class="sm:flex sm:items-center">
+        <div class="sm:flex-auto">
+            <h1 class="text-2xl font-semibold leading-6 text-gray-900">Dashboard</h1>
+            <p class="mt-2 text-sm text-gray-700">
+                Welcome back, {{ dashboard_user.username }}! Here's your account overview.
+            </p>
+        </div>
+        <div class="mt-4 sm:ml-16 sm:mt-0 sm:flex-none">
+            <button type="button" class="btn btn-primary">
+                New Action
+            </button>
+        </div>
+    </div>
+
+    <!-- Stats section -->
+    <div class="mt-8 grid grid-cols-1 gap-5 sm:grid-cols-3">
+        <div class="card">
+            <div class="flex items-center">
+                <div class="flex-shrink-0">
+                    <div class="w-8 h-8 bg-blue-500 rounded-full flex items-center justify-center">
+                        <span class="text-white text-sm font-medium">👤</span>
+                    </div>
+                </div>
+                <div class="ml-5 w-0 flex-1">
+                    <dl>
+                        <dt class="text-sm font-medium text-gray-500 truncate">Account Status</dt>
+                        <dd class="text-lg font-medium text-gray-900">
+                            {% if dashboard_user.email_verified %}
+                                <span class="inline-flex items-center px-2.5 py-0.5 rounded-full text-xs font-medium bg-green-100 text-green-800">
+                                    Verified
+                                </span>
+                            {% else %}
+                                <span class="inline-flex items-center px-2.5 py-0.5 rounded-full text-xs font-medium bg-yellow-100 text-yellow-800">
+                                    Unverified
+                                </span>
+                            {% endif %}
+                        </dd>
+                    </dl>
+                </div>
+            </div>
+        </div>
+
+        <div class="card">
+            <div class="flex items-center">
+                <div class="flex-shrink-0">
+                    <div class="w-8 h-8 bg-green-500 rounded-full flex items-center justify-center">
+                        <span class="text-white text-sm font-medium">📅</span>
+                    </div>
+                </div>
+                <div class="ml-5 w-0 flex-1">
+                    <dl>
+                        <dt class="text-sm font-medium text-gray-500 truncate">Member Since</dt>
+                        <dd class="text-lg font-medium text-gray-900">
+                            {{ dashboard_user.created_at_formatted }}
+                        </dd>
+                    </dl>
+                </div>
+            </div>
+        </div>
+
+        <div class="card">
+            <div class="flex items-center">
+                <div class="flex-shrink-0">
+                    <div class="w-8 h-8 bg-purple-500 rounded-full flex items-center justify-center">
+                        <span class="text-white text-sm font-medium">⚡</span>
+                    </div>
+                </div>
+                <div class="ml-5 w-0 flex-1">
+                    <dl>
+                        <dt class="text-sm font-medium text-gray-500 truncate">Last Activity</dt>
+                        <dd class="text-lg font-medium text-gray-900">
+                            {{ dashboard_user.updated_at_formatted }}
+                        </dd>
+                    </dl>
+                </div>
+            </div>
+        </div>
+    </div>
+
+    <!-- Account Information -->
+    <div class="mt-8 grid grid-cols-1 gap-6 lg:grid-cols-2">
+        <!-- Profile Information -->
+        <div class="card" x-data="profileForm()">
+            <div class="flex items-center justify-between mb-6">
+                <h3 class="text-lg font-medium text-gray-900">Profile Information</h3>
+                <button @click="editMode = !editMode" class="text-sm text-blue-600 hover:text-blue-700">
+                    <span x-text="editMode ? 'Cancel' : 'Edit'"></span>
+                </button>
+            </div>
+
+            <form @submit.prevent="updateProfile" class="space-y-4">
+                <div>
+                    <label for="username" class="form-label">Username</label>
+                    <input
+                        type="text"
+                        id="username"
+                        x-model="form.username"
+                        :readonly="!editMode"
+                        class="form-input"
+                        :class="{'bg-gray-50': !editMode}"
+                    >
+                </div>
+
+                <div>
+                    <label for="email" class="form-label">Email</label>
+                    <input
+                        type="email"
+                        id="email"
+                        x-model="form.email"
+                        :readonly="!editMode"
+                        class="form-input"
+                        :class="{'bg-gray-50': !editMode}"
+                    >
+                </div>
+
+                <div x-show="editMode" x-transition>
+                    <button type="submit" class="btn btn-primary" :disabled="loading">
+                        <span x-show="!loading">Update Profile</span>
+                        <span x-show="loading">Updating...</span>
+                    </button>
+                </div>
+            </form>
+        </div>
+
+        <!-- Security Settings -->
+        <div class="card" x-data="securityForm()">
+            <h3 class="text-lg font-medium text-gray-900 mb-6">Security Settings</h3>
+
+            <!-- Message Display -->
+            <div x-show="message.show" x-transition class="mb-4">
+                <div 
+                    class="p-4 rounded-md"
+                    :class="{
+                        'bg-green-50 border border-green-200 text-green-800': message.type === 'success',
+                        'bg-red-50 border border-red-200 text-red-800': message.type === 'error'
+                    }"
+                >
+                    <div class="flex justify-between items-center">
+                        <span x-text="message.text"></span>
+                        <button @click="message.show = false" class="ml-4 text-sm opacity-70 hover:opacity-100">
+                            ✕
+                        </button>
+                    </div>
+                </div>
+            </div>
+
+            <form @submit.prevent="changePassword" class="space-y-4">
+                <div>
+                    <label for="current-password" class="form-label">Current Password</label>
+                    <input
+                        type="password"
+                        id="current-password"
+                        x-model="form.currentPassword"
+                        class="form-input"
+                        placeholder="Enter current password"
+                    >
+                </div>
+
+                <div>
+                    <label for="new-password" class="form-label">New Password</label>
+                    <input
+                        type="password"
+                        id="new-password"
+                        x-model="form.newPassword"
+                        @input="validatePasswords()"
+                        class="form-input"
+                        :class="{'border-red-300 focus:border-red-500 focus:ring-red-500': errors.newPassword}"
+                        placeholder="Enter new password"
+                    >
+                    <p x-show="errors.newPassword" x-text="errors.newPassword" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div>
+                    <label for="confirm-new-password" class="form-label">Confirm New Password</label>
+                    <input
+                        type="password"
+                        id="confirm-new-password"
+                        x-model="form.confirmPassword"
+                        @input="validatePasswords()"
+                        class="form-input"
+                        :class="{'border-red-300 focus:border-red-500 focus:ring-red-500': errors.confirmPassword}"
+                        placeholder="Confirm new password"
+                    >
+                    <p x-show="errors.confirmPassword" x-text="errors.confirmPassword" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <button type="submit" class="btn btn-secondary" :disabled="loading || !isFormValid">
+                    <span x-show="!loading">Change Password</span>
+                    <span x-show="loading">Changing...</span>
+                </button>
+            </form>
+        </div>
+    </div>
+
+    <!-- Activity Feed -->
+    <div class="mt-8">
+        <div class="card">
+            <h3 class="text-lg font-medium text-gray-900 mb-6">Recent Activity</h3>
+            
+            <div class="space-y-4">
+                <div class="flex items-center justify-between py-3 border-b border-gray-200">
+                    <div class="flex items-center">
+                        <div class="w-2 h-2 bg-green-500 rounded-full mr-3"></div>
+                        <span class="text-sm text-gray-900">Account created</span>
+                    </div>
+                    <span class="text-sm text-gray-500">{{ dashboard_user.created_at_full }}</span>
+                </div>
+                
+                <div class="flex items-center justify-between py-3 border-b border-gray-200">
+                    <div class="flex items-center">
+                        <div class="w-2 h-2 bg-blue-500 rounded-full mr-3"></div>
+                        <span class="text-sm text-gray-900">Last login</span>
+                    </div>
+                    <span class="text-sm text-gray-500">{{ dashboard_user.updated_at_full }}</span>
+                </div>
+                
+                {% if !dashboard_user.email_verified %}
+                <div class="flex items-center justify-between py-3">
+                    <div class="flex items-center">
+                        <div class="w-2 h-2 bg-yellow-500 rounded-full mr-3"></div>
+                        <span class="text-sm text-gray-900">Email verification pending</span>
+                    </div>
+                    <button class="text-sm text-blue-600 hover:text-blue-700">
+                        Resend verification
+                    </button>
+                </div>
+                {% endif %}
+            </div>
+        </div>
+    </div>
+</div>
+{% endblock %}
+
+{% block scripts %}
+<script>
+    function profileForm() {
+        return {
+            editMode: false,
+            loading: false,
+            form: {
+                username: '{{ dashboard_user.username }}',
+                email: '{{ dashboard_user.email }}'
+            },
+            
+            async updateProfile() {
+                this.loading = true;
+                
+                try {
+                    const response = await fetch('/api/profile', {
+                        method: 'PUT',
+                        headers: {
+                            'Content-Type': 'application/json',
+                        },
+                        body: JSON.stringify(this.form)
+                    });
+                    
+                    if (response.ok) {
+                        this.editMode = false;
+                        // Show success message
+                    } else {
+                        // Handle errors
+                    }
+                } catch (error) {
+                    console.error('Error updating profile:', error);
+                } finally {
+                    this.loading = false;
+                }
+            }
+        }
+    }
+    
+    function securityForm() {
+        return {
+            loading: false,
+            form: {
+                currentPassword: '',
+                newPassword: '',
+                confirmPassword: ''
+            },
+            errors: {
+                newPassword: '',
+                confirmPassword: ''
+            },
+            isFormValid: false,
+            message: {
+                text: '',
+                type: '', // 'success' or 'error'
+                show: false
+            },
+            
+            validatePasswords() {
+                this.errors.newPassword = '';
+                this.errors.confirmPassword = '';
+                
+                if (this.form.newPassword && this.form.newPassword.length < 8) {
+                    this.errors.newPassword = 'Password must be at least 8 characters long';
+                }
+                
+                if (this.form.confirmPassword && this.form.newPassword !== this.form.confirmPassword) {
+                    this.errors.confirmPassword = 'Passwords do not match';
+                }
+                
+                this.isFormValid = this.form.currentPassword && 
+                                 this.form.newPassword && 
+                                 this.form.confirmPassword && 
+                                 this.form.newPassword === this.form.confirmPassword &&
+                                 this.form.newPassword.length >= 8;
+            },
+            
+            async changePassword() {
+                this.validatePasswords();
+                
+                if (!this.isFormValid) {
+                    return;
+                }
+                
+                this.loading = true;
+                
+                try {
+                    const csrfToken = document.querySelector('meta[name="csrf-token"]').getAttribute('content');
+                    const response = await fetch('/api/change-password', {
+                        method: 'POST',
+                        headers: {
+                            'Content-Type': 'application/json',
+                            'X-CSRF-Token': csrfToken,
+                        },
+                        body: JSON.stringify({
+                            current_password: this.form.currentPassword,
+                            new_password: this.form.newPassword
+                        })
+                    });
+                    
+                    if (response.ok) {
+                        this.form = {
+                            currentPassword: '',
+                            newPassword: '',
+                            confirmPassword: ''
+                        };
+                        this.errors = {
+                            newPassword: '',
+                            confirmPassword: ''
+                        };
+                        this.isFormValid = false;
+                        this.message = {
+                            text: 'Password changed successfully!',
+                            type: 'success',
+                            show: true
+                        };
+                        setTimeout(() => { this.message.show = false; }, 5000);
+                    } else {
+                        const errorData = await response.json();
+                        this.message = {
+                            text: errorData.message || 'Failed to change password. Please try again.',
+                            type: 'error',
+                            show: true
+                        };
+                        setTimeout(() => { this.message.show = false; }, 5000);
+                    }
+                } catch (error) {
+                    console.error('Error changing password:', error);
+                    this.message = {
+                        text: 'Network error. Please check your connection and try again.',
+                        type: 'error',
+                        show: true
+                    };
+                    setTimeout(() => { this.message.show = false; }, 5000);
+                } finally {
+                    this.loading = false;
+                }
+            }
+        }
+    }
+</script>
+{% endblock %}
\ No newline at end of file
diff --git a/templates/askama-shell/templates/index.html b/templates/askama-shell/templates/index.html
new file mode 100644
index 00000000..eea8fc8a
--- /dev/null
+++ b/templates/askama-shell/templates/index.html
@@ -0,0 +1,114 @@
+{% extends "base.html" %}
+
+{% block title %}Home - Rust Web Shell{% endblock %}
+
+{% block content %}
+<div class="text-center">
+    <!-- Hero section -->
+    <div class="mx-auto max-w-7xl px-6 lg:px-8">
+        <div class="mx-auto max-w-2xl py-32 sm:py-48 lg:py-56">
+            <div class="text-center">
+                <h1 class="text-4xl font-bold tracking-tight text-gray-900 sm:text-6xl">
+                    Welcome to 
+                    <span class="text-blue-600">Rust Web Shell</span>
+                </h1>
+                <p class="mt-6 text-lg leading-8 text-gray-600">
+                    A modern web application built with Rust, Axum, TailwindCSS, and Alpine.js. 
+                    Fast, secure, and ready for production.
+                </p>
+                <div class="mt-10 flex items-center justify-center gap-x-6">
+                    {% match user %}
+                        {% when Some with (_u) %}
+                            <a href="/dashboard" class="btn btn-primary">
+                                Go to Dashboard
+                            </a>
+                        {% when None %}
+                            <a href="/signup" class="btn btn-primary">
+                                Get Started
+                            </a>
+                            <a href="/login" class="text-sm font-semibold leading-6 text-gray-900">
+                                Sign In <span aria-hidden="true">→</span>
+                            </a>
+                    {% endmatch %}
+                </div>
+            </div>
+        </div>
+    </div>
+
+    <!-- Feature section -->
+    <div class="mx-auto max-w-7xl px-6 lg:px-8">
+        <div class="mx-auto max-w-2xl lg:text-center">
+            <h2 class="text-base font-semibold leading-7 text-blue-600">Built with Modern Tech</h2>
+            <p class="mt-2 text-3xl font-bold tracking-tight text-gray-900 sm:text-4xl">
+                Everything you need to get started
+            </p>
+            <p class="mt-6 text-lg leading-8 text-gray-600">
+                This template provides a solid foundation for building modern web applications with Rust.
+            </p>
+        </div>
+        
+        <div class="mx-auto mt-16 max-w-2xl sm:mt-20 lg:mt-24 lg:max-w-none">
+            <dl class="grid max-w-xl grid-cols-1 gap-x-8 gap-y-16 lg:max-w-none lg:grid-cols-3">
+                <div class="flex flex-col">
+                    <dt class="flex items-center gap-x-3 text-base font-semibold leading-7 text-gray-900">
+                        🦀 <span>Rust Backend</span>
+                    </dt>
+                    <dd class="mt-4 flex flex-auto flex-col text-base leading-7 text-gray-600">
+                        <p class="flex-auto">
+                            Fast and safe backend built with Axum, featuring async/await, type safety, and memory safety.
+                        </p>
+                    </dd>
+                </div>
+                
+                <div class="flex flex-col">
+                    <dt class="flex items-center gap-x-3 text-base font-semibold leading-7 text-gray-900">
+                        🎨 <span>Modern Frontend</span>
+                    </dt>
+                    <dd class="mt-4 flex flex-auto flex-col text-base leading-7 text-gray-600">
+                        <p class="flex-auto">
+                            Beautiful UI with TailwindCSS and interactive features powered by Alpine.js.
+                        </p>
+                    </dd>
+                </div>
+                
+                <div class="flex flex-col">
+                    <dt class="flex items-center gap-x-3 text-base font-semibold leading-7 text-gray-900">
+                        🔒 <span>Secure by Default</span>
+                    </dt>
+                    <dd class="mt-4 flex flex-auto flex-col text-base leading-7 text-gray-600">
+                        <p class="flex-auto">
+                            Built-in authentication, password hashing, and session management for security.
+                        </p>
+                    </dd>
+                </div>
+            </dl>
+        </div>
+    </div>
+
+    <!-- Tech stack showcase -->
+    <div class="bg-white py-24 sm:py-32">
+        <div class="mx-auto max-w-7xl px-6 lg:px-8">
+            <h2 class="text-center text-lg font-semibold leading-8 text-gray-900">
+                Powered by the best technologies
+            </h2>
+            <div class="mx-auto mt-10 grid max-w-lg grid-cols-4 items-center gap-x-8 gap-y-10 sm:max-w-xl sm:grid-cols-6 sm:gap-x-10 lg:mx-0 lg:max-w-none lg:grid-cols-5">
+                <div class="col-span-2 max-h-12 w-full object-contain lg:col-span-1 flex items-center justify-center">
+                    <span class="text-2xl font-bold text-gray-700">🦀 Rust</span>
+                </div>
+                <div class="col-span-2 max-h-12 w-full object-contain lg:col-span-1 flex items-center justify-center">
+                    <span class="text-lg font-semibold text-gray-700">Axum</span>
+                </div>
+                <div class="col-span-2 max-h-12 w-full object-contain lg:col-span-1 flex items-center justify-center">
+                    <span class="text-lg font-semibold text-gray-700">TailwindCSS</span>
+                </div>
+                <div class="col-span-2 max-h-12 w-full object-contain sm:col-start-2 lg:col-span-1 flex items-center justify-center">
+                    <span class="text-lg font-semibold text-gray-700">Alpine.js</span>
+                </div>
+                <div class="col-span-2 col-start-2 max-h-12 w-full object-contain sm:col-start-auto lg:col-span-1 flex items-center justify-center">
+                    <span class="text-lg font-semibold text-gray-700">SQLite</span>
+                </div>
+            </div>
+        </div>
+    </div>
+</div>
+{% endblock %}
\ No newline at end of file
diff --git a/templates/askama-shell/templates/login.html b/templates/askama-shell/templates/login.html
new file mode 100644
index 00000000..90961d7e
--- /dev/null
+++ b/templates/askama-shell/templates/login.html
@@ -0,0 +1,153 @@
+{% extends "base.html" %}
+
+{% block title %}Login - Rust Web Shell{% endblock %}
+
+{% block content %}
+<div class="min-h-screen flex items-center justify-center py-12 px-4 sm:px-6 lg:px-8">
+    <div class="max-w-md w-full space-y-8">
+        <div>
+            <h2 class="mt-6 text-center text-3xl font-extrabold text-gray-900">
+                Sign in to your account
+            </h2>
+            <p class="mt-2 text-center text-sm text-gray-600">
+                Or
+                <a href="/signup" class="font-medium text-blue-600 hover:text-blue-500">
+                    create a new account
+                </a>
+            </p>
+        </div>
+        
+        <div class="card">
+            <form x-data="loginForm()" @submit.prevent="submitForm" class="space-y-6">
+                <div>
+                    <label for="email" class="form-label">
+                        Email address
+                    </label>
+                    <input
+                        id="email"
+                        name="email"
+                        type="email"
+                        autocomplete="email"
+                        required
+                        x-model="form.email"
+                        class="form-input"
+                        :class="{'border-red-300': errors.email}"
+                        placeholder="Enter your email"
+                    >
+                    <p x-show="errors.email" x-text="errors.email" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div>
+                    <label for="password" class="form-label">
+                        Password
+                    </label>
+                    <div class="relative">
+                        <input
+                            id="password"
+                            name="password"
+                            :type="showPassword ? 'text' : 'password'"
+                            autocomplete="current-password"
+                            required
+                            x-model="form.password"
+                            class="form-input pr-10"
+                            :class="{'border-red-300': errors.password}"
+                            placeholder="Enter your password"
+                        >
+                        <button
+                            type="button"
+                            @click="showPassword = !showPassword"
+                            class="absolute inset-y-0 right-0 pr-3 flex items-center text-sm leading-5"
+                        >
+                            <span x-text="showPassword ? '🙈' : '👁️'"></span>
+                        </button>
+                    </div>
+                    <p x-show="errors.password" x-text="errors.password" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div class="flex items-center justify-between">
+                    <div class="flex items-center">
+                        <input
+                            id="remember-me"
+                            name="remember-me"
+                            type="checkbox"
+                            x-model="form.remember"
+                            class="h-4 w-4 text-blue-600 focus:ring-blue-500 border-gray-300 rounded"
+                        >
+                        <label for="remember-me" class="ml-2 block text-sm text-gray-900">
+                            Remember me
+                        </label>
+                    </div>
+
+                    <div class="text-sm">
+                        <a href="/forgot-password" class="font-medium text-blue-600 hover:text-blue-500">
+                            Forgot your password?
+                        </a>
+                    </div>
+                </div>
+
+                <div>
+                    <button
+                        type="submit"
+                        :disabled="loading"
+                        class="btn btn-primary w-full"
+                        :class="{'opacity-50 cursor-not-allowed': loading}"
+                    >
+                        <span x-show="!loading">Sign in</span>
+                        <span x-show="loading" class="flex items-center">
+                            <svg class="animate-spin -ml-1 mr-3 h-5 w-5 text-white" xmlns="http://www.w3.org/2000/svg" fill="none" viewBox="0 0 24 24">
+                                <circle class="opacity-25" cx="12" cy="12" r="10" stroke="currentColor" stroke-width="4"></circle>
+                                <path class="opacity-75" fill="currentColor" d="M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4zm2 5.291A7.962 7.962 0 014 12H0c0 3.042 1.135 5.824 3 7.938l3-2.647z"></path>
+                            </svg>
+                            Signing in...
+                        </span>
+                    </button>
+                </div>
+            </form>
+        </div>
+    </div>
+</div>
+{% endblock %}
+
+{% block scripts %}
+<script>
+    function loginForm() {
+        return {
+            form: {
+                email: '',
+                password: '',
+                remember: false
+            },
+            errors: {},
+            loading: false,
+            showPassword: false,
+            
+            async submitForm() {
+                this.loading = true;
+                this.errors = {};
+                
+                try {
+                    const response = await fetch('/login', {
+                        method: 'POST',
+                        headers: {
+                            'Content-Type': 'application/json',
+                        },
+                        body: JSON.stringify(this.form)
+                    });
+                    
+                    const data = await response.json();
+                    
+                    if (response.ok) {
+                        window.location.href = '/dashboard';
+                    } else {
+                        this.errors = data.errors || { general: data.message || 'Login failed' };
+                    }
+                } catch (error) {
+                    this.errors = { general: 'Network error. Please try again.' };
+                } finally {
+                    this.loading = false;
+                }
+            }
+        }
+    }
+</script>
+{% endblock %}
\ No newline at end of file
diff --git a/templates/askama-shell/templates/signup.html b/templates/askama-shell/templates/signup.html
new file mode 100644
index 00000000..7a41f837
--- /dev/null
+++ b/templates/askama-shell/templates/signup.html
@@ -0,0 +1,231 @@
+{% extends "base.html" %}
+
+{% block title %}Sign Up - Rust Web Shell{% endblock %}
+
+{% block content %}
+<div class="min-h-screen flex items-center justify-center py-12 px-4 sm:px-6 lg:px-8">
+    <div class="max-w-md w-full space-y-8">
+        <div>
+            <h2 class="mt-6 text-center text-3xl font-extrabold text-gray-900">
+                Create your account
+            </h2>
+            <p class="mt-2 text-center text-sm text-gray-600">
+                Or
+                <a href="/login" class="font-medium text-blue-600 hover:text-blue-500">
+                    sign in to your existing account
+                </a>
+            </p>
+        </div>
+        
+        <div class="card">
+            <form x-data="signupForm()" @submit.prevent="submitForm" class="space-y-6">
+                <div>
+                    <label for="username" class="form-label">
+                        Username
+                    </label>
+                    <input
+                        id="username"
+                        name="username"
+                        type="text"
+                        autocomplete="username"
+                        required
+                        x-model="form.username"
+                        class="form-input"
+                        :class="{'border-red-300': errors.username}"
+                        placeholder="Choose a username"
+                    >
+                    <p x-show="errors.username" x-text="errors.username" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div>
+                    <label for="email" class="form-label">
+                        Email address
+                    </label>
+                    <input
+                        id="email"
+                        name="email"
+                        type="email"
+                        autocomplete="email"
+                        required
+                        x-model="form.email"
+                        class="form-input"
+                        :class="{'border-red-300': errors.email}"
+                        placeholder="Enter your email"
+                    >
+                    <p x-show="errors.email" x-text="errors.email" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div>
+                    <label for="password" class="form-label">
+                        Password
+                    </label>
+                    <div class="relative">
+                        <input
+                            id="password"
+                            name="password"
+                            :type="showPassword ? 'text' : 'password'"
+                            autocomplete="new-password"
+                            required
+                            x-model="form.password"
+                            class="form-input pr-10"
+                            :class="{'border-red-300': errors.password}"
+                            placeholder="Create a password"
+                            @input="checkPasswordStrength"
+                        >
+                        <button
+                            type="button"
+                            @click="showPassword = !showPassword"
+                            class="absolute inset-y-0 right-0 pr-3 flex items-center text-sm leading-5"
+                        >
+                            <span x-text="showPassword ? '🙈' : '👁️'"></span>
+                        </button>
+                    </div>
+                    
+                    <!-- Password strength indicator -->
+                    <div x-show="form.password" class="mt-2">
+                        <div class="flex space-x-1">
+                            <div class="h-2 w-1/4 rounded" :class="passwordStrength >= 1 ? 'bg-red-500' : 'bg-gray-200'"></div>
+                            <div class="h-2 w-1/4 rounded" :class="passwordStrength >= 2 ? 'bg-yellow-500' : 'bg-gray-200'"></div>
+                            <div class="h-2 w-1/4 rounded" :class="passwordStrength >= 3 ? 'bg-green-400' : 'bg-gray-200'"></div>
+                            <div class="h-2 w-1/4 rounded" :class="passwordStrength >= 4 ? 'bg-green-500' : 'bg-gray-200'"></div>
+                        </div>
+                        <p class="text-xs text-gray-600 mt-1" x-text="passwordStrengthText"></p>
+                    </div>
+                    
+                    <p x-show="errors.password" x-text="errors.password" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div>
+                    <label for="confirm-password" class="form-label">
+                        Confirm Password
+                    </label>
+                    <input
+                        id="confirm-password"
+                        name="confirm-password"
+                        type="password"
+                        autocomplete="new-password"
+                        required
+                        x-model="form.confirmPassword"
+                        class="form-input"
+                        :class="{'border-red-300': errors.confirmPassword}"
+                        placeholder="Confirm your password"
+                    >
+                    <p x-show="errors.confirmPassword" x-text="errors.confirmPassword" class="mt-1 text-sm text-red-600"></p>
+                </div>
+
+                <div class="flex items-center">
+                    <input
+                        id="terms"
+                        name="terms"
+                        type="checkbox"
+                        required
+                        x-model="form.acceptTerms"
+                        class="h-4 w-4 text-blue-600 focus:ring-blue-500 border-gray-300 rounded"
+                    >
+                    <label for="terms" class="ml-2 block text-sm text-gray-900">
+                        I agree to the
+                        <a href="/terms" class="text-blue-600 hover:text-blue-500">Terms of Service</a>
+                        and
+                        <a href="/privacy" class="text-blue-600 hover:text-blue-500">Privacy Policy</a>
+                    </label>
+                </div>
+
+                <div>
+                    <button
+                        type="submit"
+                        :disabled="loading || !form.acceptTerms"
+                        class="btn btn-primary w-full"
+                        :class="{'opacity-50 cursor-not-allowed': loading || !form.acceptTerms}"
+                    >
+                        <span x-show="!loading">Create Account</span>
+                        <span x-show="loading" class="flex items-center">
+                            <svg class="animate-spin -ml-1 mr-3 h-5 w-5 text-white" xmlns="http://www.w3.org/2000/svg" fill="none" viewBox="0 0 24 24">
+                                <circle class="opacity-25" cx="12" cy="12" r="10" stroke="currentColor" stroke-width="4"></circle>
+                                <path class="opacity-75" fill="currentColor" d="M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4zm2 5.291A7.962 7.962 0 014 12H0c0 3.042 1.135 5.824 3 7.938l3-2.647z"></path>
+                            </svg>
+                            Creating Account...
+                        </span>
+                    </button>
+                </div>
+            </form>
+        </div>
+    </div>
+</div>
+{% endblock %}
+
+{% block scripts %}
+<script>
+    function signupForm() {
+        return {
+            form: {
+                username: '',
+                email: '',
+                password: '',
+                confirmPassword: '',
+                acceptTerms: false
+            },
+            errors: {},
+            loading: false,
+            showPassword: false,
+            passwordStrength: 0,
+            passwordStrengthText: '',
+            
+            checkPasswordStrength() {
+                const password = this.form.password;
+                let score = 0;
+                let text = '';
+                
+                if (password.length >= 8) score++;
+                if (/[a-z]/.test(password)) score++;
+                if (/[A-Z]/.test(password)) score++;
+                if (/[0-9]/.test(password)) score++;
+                if (/[^A-Za-z0-9]/.test(password)) score++;
+                
+                this.passwordStrength = Math.min(score, 4);
+                
+                const texts = ['Very Weak', 'Weak', 'Fair', 'Good', 'Strong'];
+                this.passwordStrengthText = texts[this.passwordStrength] || '';
+            },
+            
+            async submitForm() {
+                this.loading = true;
+                this.errors = {};
+                
+                // Client-side validation
+                if (this.form.password !== this.form.confirmPassword) {
+                    this.errors.confirmPassword = 'Passwords do not match';
+                    this.loading = false;
+                    return;
+                }
+                
+                try {
+                    const response = await fetch('/signup', {
+                        method: 'POST',
+                        headers: {
+                            'Content-Type': 'application/json',
+                        },
+                        body: JSON.stringify({
+                            username: this.form.username,
+                            email: this.form.email,
+                            password: this.form.password,
+                            confirm_password: this.form.confirmPassword
+                        })
+                    });
+                    
+                    const data = await response.json();
+                    
+                    if (response.ok) {
+                        window.location.href = '/login?message=Account created successfully. Please sign in.';
+                    } else {
+                        this.errors = data.errors || { general: data.message || 'Registration failed' };
+                    }
+                } catch (error) {
+                    this.errors = { general: 'Network error. Please try again.' };
+                } finally {
+                    this.loading = false;
+                }
+            }
+        }
+    }
+</script>
+{% endblock %}
\ No newline at end of file
diff --git a/templates/askama-shell/tsconfig.json b/templates/askama-shell/tsconfig.json
new file mode 100644
index 00000000..7a48139d
--- /dev/null
+++ b/templates/askama-shell/tsconfig.json
@@ -0,0 +1,25 @@
+{
+  "compilerOptions": {
+    "target": "ES2020",
+    "module": "ESNext",
+    "moduleResolution": "node",
+    "strict": true,
+    "esModuleInterop": true,
+    "skipLibCheck": true,
+    "forceConsistentCasingInFileNames": true,
+    "declaration": false,
+    "outDir": "./assets/dist",
+    "rootDir": "./assets/js",
+    "allowSyntheticDefaultImports": true,
+    "resolveJsonModule": true,
+    "isolatedModules": true,
+    "noEmit": false
+  },
+  "include": [
+    "assets/js/**/*"
+  ],
+  "exclude": [
+    "node_modules",
+    "assets/dist"
+  ]
+}
\ No newline at end of file
diff --git a/templates/cpp-shell/README.md b/templates/cpp-shell/README.md
new file mode 100644
index 00000000..feb4b49c
--- /dev/null
+++ b/templates/cpp-shell/README.md
@@ -0,0 +1,358 @@
+# C++ Development Shell Template
+
+A comprehensive C++ development environment with modern tooling for building high-performance C++ applications.
+
+## Features
+
+### Multiple Compilers
+- **GCC** - GNU Compiler Collection with C++23 support
+- **Clang** - LLVM-based compiler with advanced diagnostics
+- **Cross-compiler Testing** - Build with both compilers for compatibility
+
+### Modern Build Systems
+- **CMake** - Cross-platform build system generator
+- **Meson** - Fast, user-friendly build system
+- **Ninja** - Small build system focused on speed
+- **GNU Make** - Traditional make tool
+
+### Advanced Static Analysis
+- **clang-tidy** - Clang-based C++ linter with extensive checks
+- **cppcheck** - Static analysis tool for C/C++
+- **include-what-you-use** - Include optimization tool
+- **cpplint** - Google's C++ style checker
+
+### Debugging and Profiling
+- **GDB** - GNU Debugger with pretty printers
+- **LLDB** - LLVM Debugger with advanced features
+- **Valgrind** - Memory error detection and profiling
+- **rr** - Record and replay debugger
+- **heaptrack** - Heap memory profiler
+- **perf** - Linux performance analysis tools
+
+### Testing Frameworks
+- **Google Test** - Google's C++ testing framework
+- **Catch2** - Modern C++ test framework
+- **Doctest** - Lightweight testing framework
+
+### Package Management
+- **Conan** - Modern C++ package manager
+- **vcpkg** - Microsoft's C++ package manager
+
+### Documentation
+- **Doxygen** - API documentation generator
+- **Graphviz** - Diagram generation for Doxygen
+
+## Quick Start
+
+```bash
+# Create new project from template
+nix flake init -t github:connerohnesorge/dotfiles#cpp-shell
+
+# Enter development shell
+nix develop
+
+# Initialize CMake project
+init-cmake
+
+# Build with GCC
+build-gcc
+
+# Build with Clang
+build-clang
+
+# Run tests
+test-project
+```
+
+## Available Commands
+
+### Project Initialization
+- `init-cmake` - Initialize modern CMake project with C++20
+- `init-meson` - Initialize Meson project with C++20
+- `cx` - Edit CMakeLists.txt
+- `mx` - Edit meson.build
+
+### Building
+- `build-gcc` - Build project with GCC compiler
+- `build-clang` - Build project with Clang compiler
+- `build-meson` - Build project with Meson build system
+
+### Testing
+- `test-project` - Run all project tests
+
+### Static Analysis
+- `analyze-clang-tidy` - Run clang-tidy analysis
+- `analyze-cppcheck` - Run cppcheck analysis
+- `analyze-iwyu` - Run include-what-you-use analysis
+
+### Debugging
+- `debug-gdb` - Debug executable with GDB
+- `debug-lldb` - Debug executable with LLDB
+- `profile-valgrind` - Memory profiling with Valgrind
+
+### Documentation and Utilities
+- `docs` - Generate API documentation with Doxygen
+- `format` - Format code with clang-format
+- `clean` - Clean build artifacts
+- `dx` - Edit flake.nix
+
+## Project Structure
+
+The template creates a modern C++ project structure:
+
+```
+my-cpp-project/
+├── src/
+│   └── main.cpp          # Main application source
+├── include/              # Header files
+├── tests/
+│   ├── CMakeLists.txt    # Test configuration
+│   └── test_main.cpp     # Test files
+├── CMakeLists.txt        # CMake configuration
+├── meson.build           # Meson configuration (alternative)
+├── build-gcc/            # GCC build directory
+├── build-clang/          # Clang build directory
+├── builddir/             # Meson build directory
+└── flake.nix             # Nix development environment
+```
+
+## CMake Configuration
+
+The template generates a modern CMake configuration:
+
+```cmake
+cmake_minimum_required(VERSION 3.20)
+project(MyProject VERSION 1.0.0 LANGUAGES CXX)
+
+# Modern C++ standards
+set(CMAKE_CXX_STANDARD 20)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+set(CMAKE_CXX_EXTENSIONS OFF)
+
+# Compiler-specific optimizations
+if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+    set(CMAKE_CXX_FLAGS_DEBUG "-g -O0 -fsanitize=address,undefined")
+    set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
+elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+    set(CMAKE_CXX_FLAGS_DEBUG "-g -O0 -fsanitize=address,undefined")
+    set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
+endif()
+```
+
+## Compiler Switching
+
+Build with different compilers for testing:
+
+```bash
+# Build with GCC
+build-gcc
+
+# Build with Clang  
+build-clang
+
+# Compare outputs and performance
+```
+
+## Static Analysis Workflow
+
+Comprehensive code analysis:
+
+```bash
+# Generate compile commands for analysis tools
+cmake -B build -S . -DCMAKE_EXPORT_COMPILE_COMMANDS=ON
+
+# Run different analyzers
+analyze-clang-tidy    # Clang-based linting
+analyze-cppcheck      # Static analysis
+analyze-iwyu          # Include optimization
+```
+
+## Testing Strategy
+
+Multiple testing frameworks available:
+
+### Google Test
+```cpp
+#include <gtest/gtest.h>
+
+TEST(BasicTest, TruthTest) {
+    EXPECT_TRUE(true);
+}
+
+TEST(MathTest, Addition) {
+    EXPECT_EQ(2 + 2, 4);
+}
+```
+
+### Catch2
+```cpp
+#include <catch2/catch.hpp>
+
+TEST_CASE("Basic test", "[basic]") {
+    REQUIRE(2 + 2 == 4);
+}
+```
+
+## Debugging Features
+
+### GDB with Pretty Printers
+```bash
+debug-gdb
+# Enhanced STL container display
+# Smart pointer visualization
+# Custom type formatting
+```
+
+### LLDB Advanced Features
+```bash
+debug-lldb
+# LLVM-based debugging
+# Advanced expression evaluation
+# Cross-platform compatibility
+```
+
+## Memory Analysis
+
+### Valgrind Integration
+```bash
+profile-valgrind
+# Memory leak detection
+# Use-after-free detection
+# Double-free detection
+# Memory access violations
+```
+
+### AddressSanitizer
+Built into debug builds automatically:
+- Fast memory error detection
+- Use-after-free detection
+- Buffer overflow detection
+
+## Package Management
+
+### Conan Integration
+```bash
+# Install Conan packages
+conan install boost/1.82.0@
+
+# Use in CMake
+find_package(Boost REQUIRED)
+target_link_libraries(main Boost::boost)
+```
+
+### vcpkg Integration
+```bash
+# Install vcpkg packages
+vcpkg install fmt spdlog nlohmann-json
+
+# Use with CMake toolchain
+cmake -B build -S . -DCMAKE_TOOLCHAIN_FILE=/path/to/vcpkg.cmake
+```
+
+## Performance Optimization
+
+### Compiler Optimizations
+- **Debug**: `-g -O0 -fsanitize=address,undefined`
+- **Release**: `-O3 -DNDEBUG -march=native`
+- **Profile-guided optimization** support
+
+### Profiling Tools
+- **perf** - CPU profiling and analysis
+- **heaptrack** - Memory allocation profiling
+- **Valgrind Callgrind** - Call graph profiling
+
+## IDE Integration
+
+### Language Servers
+- **clangd** - Clang-based language server
+- **ccls** - Alternative C++ language server
+
+### Features
+- Real-time error checking
+- Code completion
+- Refactoring support
+- Symbol navigation
+
+## Modern C++ Features
+
+The environment supports cutting-edge C++ standards:
+
+### C++20 Features
+- Concepts
+- Modules (experimental)
+- Coroutines
+- Ranges library
+- std::format
+
+### C++23 Features (where available)
+- std::print
+- Multidimensional subscript operator
+- Static operator()
+- Deducing this
+
+## Cross-Platform Support
+
+- ✅ **Linux** (x86_64, ARM64)
+- ✅ **macOS** (Intel, Apple Silicon)
+- 🔧 **Windows** (via WSL)
+
+### Platform-Specific Tools
+- **Linux**: strace, ltrace, perf
+- **macOS**: Xcode tools, system frameworks
+- **Cross-platform**: Most tools work everywhere
+
+## Best Practices
+
+### Code Organization
+```cpp
+// Modern header organization
+#include <algorithm>  // Standard library first
+#include <vector>
+
+#include <boost/algorithm/string.hpp>  // Third-party
+
+#include "my_project/my_header.hpp"    // Project headers
+```
+
+### CMake Best Practices
+- Use `target_*` commands instead of global variables
+- Prefer `find_package()` over manual library handling
+- Enable `CMAKE_EXPORT_COMPILE_COMMANDS` for tooling
+
+### Static Analysis Integration
+- Run clang-tidy in CI/CD
+- Use `.clang-tidy` configuration files
+- Integrate with pre-commit hooks
+
+## Troubleshooting
+
+### Common Issues
+
+**Compiler not found**: Check that GCC/Clang are in PATH
+**CMake errors**: Ensure CMake 3.20+ is available
+**Test failures**: Verify Google Test is properly linked
+**Static analysis**: Generate compile_commands.json first
+
+### Performance Tips
+- Use Ninja for faster builds
+- Enable ccache for compilation caching
+- Use multiple build directories for different configurations
+- Leverage parallel builds with `-j$(nproc)`
+
+## Advanced Features
+
+### Sanitizers
+- AddressSanitizer (ASan)
+- UndefinedBehaviorSanitizer (UBSan)
+- ThreadSanitizer (TSan)
+- MemorySanitizer (MSan)
+
+### Link-Time Optimization
+```cmake
+set_property(TARGET main PROPERTY INTERPROCEDURAL_OPTIMIZATION TRUE)
+```
+
+### Custom Toolchains
+Easy switching between different compiler versions and cross-compilation targets.
+
+This template provides everything needed for professional C++ development, from simple programs to complex applications with modern tooling and best practices.
\ No newline at end of file
diff --git a/templates/cpp-shell/flake.lock b/templates/cpp-shell/flake.lock
new file mode 100644
index 00000000..c08ddc59
--- /dev/null
+++ b/templates/cpp-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1754151594,
+        "narHash": "sha256-S30TWshtDmNlU30u842RidFUraKj1f2dd4nrKRHm3gE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "7b6929d8b900de3142638310f8bc40cff4f2c507",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754061284,
+        "narHash": "sha256-ONcNxdSiPyJ9qavMPJYAXDNBzYobHRxw0WbT38lKbwU=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "58bd4da459f0a39e506847109a2a5cfceb837796",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/cpp-shell/flake.nix b/templates/cpp-shell/flake.nix
new file mode 100644
index 00000000..8474f21d
--- /dev/null
+++ b/templates/cpp-shell/flake.nix
@@ -0,0 +1,249 @@
+{
+  description = "A development shell for C++";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        config.allowUnfree = true;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+          deps = [pkgs.git];
+        };
+        cx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/CMakeLists.txt'';
+          description = "Edit CMakeLists.txt";
+        };
+        mx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/meson.build'';
+          description = "Edit meson.build";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "cpp-dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            # Nix tooling
+            alejandra
+            nixd
+            statix
+            deadnix
+
+            # C++ Compilers
+            gcc
+            clang
+            llvm
+
+            # Build Systems
+            cmake
+            meson
+            ninja
+            gnumake
+            bear # Generate compile_commands.json
+
+            # Package Managers
+            conan
+            vcpkg
+
+            # Static Analysis
+            clang-tools # clang-tidy, clang-format
+            cppcheck
+            include-what-you-use
+            cpplint
+
+            # Debugging and Profiling
+            gdb
+            lldb
+
+            # Testing Frameworks
+            gtest
+            catch2
+            doctest
+
+            # Documentation
+            doxygen
+            graphviz # For Doxygen diagrams
+
+            # Language Servers and IDE Tools
+            ccls
+
+            # Libraries (commonly used)
+            boost
+            eigen
+            fmt
+            spdlog
+            nlohmann_json
+            protobuf
+
+            # Development Utilities
+            pkg-config
+            autoconf
+            automake
+            libtool
+            git
+            gitflow
+            pre-commit
+
+            # Cross-platform support
+          ]
+          ++ pkgs.lib.optionals pkgs.stdenv.isLinux [
+            # Linux-specific tools
+            rr # Record and replay debugger (Linux only)
+            hotspot # GUI for perf (Linux only)
+            heaptrack # Heap profiler (Linux only)
+            valgrind
+            strace
+            ltrace
+            patchelf
+          ]
+          ++ pkgs.lib.optionals pkgs.stdenv.isDarwin [
+            # macOS-specific tools
+            darwin.apple_sdk.frameworks.Foundation
+            darwin.apple_sdk.frameworks.CoreFoundation
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "🚀 C++ Development Environment"
+          echo "📦 GCC version: $(gcc --version | head -n1)"
+          echo "📦 Clang version: $(clang --version | head -n1)"
+          echo "📦 CMake version: $(cmake --version | head -n1)"
+          echo ""
+          echo "🛠️  Available Compilers:"
+          echo "   • gcc/g++       - GNU Compiler Collection"
+          echo "   • clang/clang++ - LLVM Clang compiler"
+          echo ""
+          echo "🔧 Build Systems:"
+          echo "   • cmake         - Cross-platform build system"
+          echo "   • meson         - Fast build system"
+          echo "   • ninja         - Small build system with focus on speed"
+          echo "   • make          - GNU Make build tool"
+          echo ""
+          echo "🧪 Testing Frameworks:"
+          echo "   • gtest         - Google Test framework"
+          echo "   • catch2        - Modern C++ test framework"
+          echo "   • doctest       - Lightweight testing framework"
+          echo ""
+          echo "🔍 Static Analysis:"
+          echo "   • clang-tidy    - Clang-based C++ linter"
+          echo "   • cppcheck      - Static analysis tool"
+          echo "   • include-what-you-use - Include optimization"
+          echo ""
+          echo "🐛 Debugging Tools:"
+          echo "   • gdb           - GNU Debugger"
+          echo "   • lldb          - LLVM Debugger"
+          echo "   • valgrind      - Memory error detector"
+          echo "   • rr            - Record and replay debugger"
+          echo ""
+          echo "📚 Package Management:"
+          echo "   • conan         - C++ package manager"
+          echo "   • vcpkg         - Microsoft C++ package manager"
+          echo ""
+          echo "🚀 Quick Commands:"
+          echo "   • init-cmake    - Initialize CMake project"
+          echo "   • init-meson    - Initialize Meson project"
+          echo "   • build-gcc     - Build with GCC"
+          echo "   • build-clang   - Build with Clang"
+          echo "   • build-meson   - Build with Meson"
+          echo "   • test-project  - Run tests"
+          echo "   • analyze-clang-tidy - Static analysis with clang-tidy"
+          echo "   • analyze-cppcheck   - Static analysis with cppcheck"
+          echo "   • debug-gdb     - Debug with GDB"
+          echo "   • debug-lldb    - Debug with LLDB"
+          echo "   • profile-valgrind - Memory profiling"
+          echo "   • docs          - Generate documentation"
+          echo "   • format        - Format code"
+          echo "   • clean         - Clean build artifacts"
+          echo ""
+          echo "💡 Try: 'init-cmake && build-gcc' to set up and build a C++ project!"
+          echo "💡 Try: 'nix fmt' to format Nix code!"
+
+          # Set up environment variables
+          export CC=gcc
+          export CXX=g++
+          export CMAKE_EXPORT_COMPILE_COMMANDS=ON
+        '';
+      };
+
+      packages = {
+        # Example C++ package build (uncomment and customize)
+        # default = pkgs.stdenv.mkDerivation {
+        #   pname = "my-cpp-project";
+        #   version = "0.1.0";
+        #   src = ./.;
+        #   nativeBuildInputs = with pkgs; [ cmake ];
+        #   buildInputs = with pkgs; [ boost ];
+        #   configurePhase = ''
+        #     cmake -B build -S . -DCMAKE_BUILD_TYPE=Release
+        #   '';
+        #   buildPhase = ''
+        #     cmake --build build -j$NIX_BUILD_CORES
+        #   '';
+        #   installPhase = ''
+        #     cmake --install build --prefix $out
+        #   '';
+        #   meta = with pkgs.lib; {
+        #     description = "My C++ project";
+        #     homepage = "https://github.com/user/my-cpp-project";
+        #     license = licenses.mit;
+        #     maintainers = with maintainers; [ ];
+        #   };
+        # };
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            clang-format.enable = true; # C++ formatter
+          };
+          settings = {
+            formatter = {
+              clang-format = {
+                options = ["--style=Google"];
+                includes = ["*.cpp" "*.hpp" "*.h" "*.cc" "*.cxx"];
+              };
+            };
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/csharp-shell/.gitignore b/templates/csharp-shell/.gitignore
new file mode 100644
index 00000000..8c285092
--- /dev/null
+++ b/templates/csharp-shell/.gitignore
@@ -0,0 +1,10 @@
+bin/
+obj/
+*.user
+*.suo
+*.cache
+.vs/
+.vscode/
+.idea/
+packages/
+*.lock.json
\ No newline at end of file
diff --git a/templates/csharp-shell/README.md b/templates/csharp-shell/README.md
new file mode 100644
index 00000000..863abfba
--- /dev/null
+++ b/templates/csharp-shell/README.md
@@ -0,0 +1,96 @@
+# C# Development Shell Template
+
+A Nix flake template for C# development with .NET 8 SDK and `buildDotnetModule`.
+
+## Features
+
+- .NET 8 SDK development environment
+- NuGet package management with Nix
+- OmniSharp language server support
+- NetCoreDbg debugger
+- Example console application with Newtonsoft.Json
+
+## Quick Start
+
+```bash
+# Initialize in current directory
+nix flake init -t github:connerohnesorge/dotfiles#csharp-shell
+
+# Enter development shell
+nix develop
+
+# Build and run with dotnet
+dotnet build src/MyApp.csproj
+dotnet run --project src/MyApp.csproj -- arg1 arg2
+
+# Build with Nix
+nix build
+
+# Run Nix-built binary
+./result/bin/MyApp arg1 arg2
+```
+
+## Project Structure
+
+```
+.
+├── flake.nix           # Nix flake configuration
+├── deps.json           # NuGet dependencies for Nix
+├── src/
+│   ├── MyApp.csproj    # C# project file
+│   └── Program.cs      # Main application code
+└── .gitignore          # Git ignore rules
+```
+
+## Managing Dependencies
+
+### Adding NuGet Packages
+
+1. Edit `src/MyApp.csproj` to add PackageReference
+2. Restore packages and regenerate deps.json:
+   ```bash
+   nix develop -c bash -c "dotnet restore src/MyApp.csproj --packages=packageDir && nuget-to-json packageDir > deps.json && rm -r packageDir"
+   ```
+3. Rebuild with Nix:
+   ```bash
+   nix build
+   ```
+
+## Development Tools
+
+The development shell includes:
+
+- **dotnet**: .NET 8 SDK for building and running C# applications
+- **omnisharp-roslyn**: Language server for IDE support
+- **netcoredbg**: Debugger for .NET Core
+- **nuget-to-json**: Tool for generating Nix-compatible dependency files
+
+## Customization
+
+### Change .NET Version
+
+Edit `flake.nix` to use a different SDK version:
+```nix
+dotnet = pkgs.dotnet-sdk_9;  # For .NET 9
+dotnet-runtime = pkgs.dotnet-runtime_9;
+```
+
+### Multiple Projects
+
+Add additional project files to the `projectFile` attribute or use a solution file:
+```nix
+projectFile = "src/MySolution.sln";
+```
+
+### Publishing
+
+To create a self-contained deployment:
+```bash
+dotnet publish -c Release -r linux-x64 --self-contained
+```
+
+## Troubleshooting
+
+- **Missing dependencies**: Ensure `deps.json` is up to date after adding new NuGet packages
+- **Build failures**: Check that the project file path matches in `flake.nix`
+- **Runtime errors**: Verify the correct .NET runtime version is specified
diff --git a/templates/csharp-shell/deps.json b/templates/csharp-shell/deps.json
new file mode 100644
index 00000000..9970522f
--- /dev/null
+++ b/templates/csharp-shell/deps.json
@@ -0,0 +1,7 @@
+[
+  {
+    "pname": "Newtonsoft.Json",
+    "version": "13.0.3",
+    "hash": "sha256-hy/BieY4qxBWVVsDqqOPaLy1QobiIapkbrESm6v2PHc="
+  }
+]
diff --git a/templates/csharp-shell/flake.lock b/templates/csharp-shell/flake.lock
new file mode 100644
index 00000000..e5bbead1
--- /dev/null
+++ b/templates/csharp-shell/flake.lock
@@ -0,0 +1,61 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1757347588,
+        "narHash": "sha256-tLdkkC6XnsY9EOZW9TlpesTclELy8W7lL2ClL+nma8o=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "b599843bad24621dcaa5ab60dac98f9b0eb1cabe",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/csharp-shell/flake.nix b/templates/csharp-shell/flake.nix
new file mode 100644
index 00000000..95b3063c
--- /dev/null
+++ b/templates/csharp-shell/flake.nix
@@ -0,0 +1,68 @@
+{
+  description = "C# development environment with .NET SDK";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+  };
+
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      dotnet = pkgs.dotnet-sdk_8;
+
+      # Example package build (uncomment and customize for your project)
+      # myApp = pkgs.buildDotnetModule rec {
+      #   pname = "my-csharp-app";
+      #   version = "1.0.0";
+      #
+      #   src = ./.;
+      #
+      #   projectFile = "src/MyApp.csproj";
+      #   nugetDeps = ./deps.json;
+      #
+      #   dotnet-sdk = dotnet;
+      #   dotnet-runtime = pkgs.dotnet-runtime_8;
+      #
+      #   executables = ["MyApp"];
+      # };
+    in {
+      # packages = {
+      #   default = myApp;
+      # };
+
+      devShells.default = pkgs.mkShell {
+        buildInputs = with pkgs; [
+          dotnet
+          omnisharp-roslyn
+          netcoredbg
+          nuget-to-json
+        ];
+
+        shellHook = ''
+          echo "C# Development Environment"
+          echo "------------------------"
+          echo "dotnet SDK: ${dotnet.version}"
+          echo ""
+          echo "Available commands:"
+          echo "  dotnet build        - Build the project"
+          echo "  dotnet run          - Run the application"
+          echo "  dotnet test         - Run tests"
+          echo "  dotnet restore      - Restore dependencies"
+          echo "  dotnet publish      - Publish the application"
+          echo ""
+          echo "To regenerate nuget dependencies for Nix:"
+          echo "  nuget-to-json src/MyApp.csproj > deps.json"
+          echo ""
+          echo "To build with Nix:"
+          echo "  nix build"
+          echo ""
+        '';
+      };
+    });
+}
diff --git a/templates/csharp-shell/src/MyApp.csproj b/templates/csharp-shell/src/MyApp.csproj
new file mode 100644
index 00000000..815f77f2
--- /dev/null
+++ b/templates/csharp-shell/src/MyApp.csproj
@@ -0,0 +1,16 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+  <PropertyGroup>
+    <OutputType>Exe</OutputType>
+    <TargetFramework>net8.0</TargetFramework>
+    <RootNamespace>MyApp</RootNamespace>
+    <AssemblyName>MyApp</AssemblyName>
+    <Nullable>enable</Nullable>
+    <ImplicitUsings>enable</ImplicitUsings>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
+  </ItemGroup>
+
+</Project>
\ No newline at end of file
diff --git a/templates/csharp-shell/src/Program.cs b/templates/csharp-shell/src/Program.cs
new file mode 100644
index 00000000..2f156cb3
--- /dev/null
+++ b/templates/csharp-shell/src/Program.cs
@@ -0,0 +1,46 @@
+using System;
+using System.Linq;
+using Newtonsoft.Json;
+
+namespace MyApp
+{
+    public class Program
+    {
+        public static void Main(string[] args)
+        {
+            Console.WriteLine("Welcome to My C# Application!");
+            Console.WriteLine("--------------------------------");
+            
+            var appInfo = new
+            {
+                Name = "MyApp",
+                Version = "1.0.0",
+                Framework = ".NET 8",
+                Arguments = args
+            };
+            
+            string json = JsonConvert.SerializeObject(appInfo, Formatting.Indented);
+            Console.WriteLine("\nApplication Info:");
+            Console.WriteLine(json);
+            
+            if (args.Length > 0)
+            {
+                Console.WriteLine($"\nReceived {args.Length} argument(s):");
+                foreach (var arg in args.Select((value, index) => new { value, index }))
+                {
+                    Console.WriteLine($"  [{arg.index}]: {arg.value}");
+                }
+            }
+            else
+            {
+                Console.WriteLine("\nNo arguments provided. Try running with: dotnet run -- arg1 arg2");
+            }
+            
+            if (Environment.UserInteractive && !Console.IsInputRedirected)
+            {
+                Console.WriteLine("\nPress any key to exit...");
+                Console.ReadKey();
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/templates/cuda-shell/.envrc b/templates/cuda-shell/.envrc
new file mode 100644
index 00000000..3550a30f
--- /dev/null
+++ b/templates/cuda-shell/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/templates/cuda-shell/.gitignore b/templates/cuda-shell/.gitignore
new file mode 100644
index 00000000..f114ed80
--- /dev/null
+++ b/templates/cuda-shell/.gitignore
@@ -0,0 +1,6 @@
+*.so
+result
+target
+__pycache__
+*.pyc
+.direnv
diff --git a/templates/cuda-shell/flake.lock b/templates/cuda-shell/flake.lock
new file mode 100644
index 00000000..826eb0dd
--- /dev/null
+++ b/templates/cuda-shell/flake.lock
@@ -0,0 +1,79 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1750506804,
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "4206c4cb56751df534751b058295ea61357bbbaa",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "rust-overlay": "rust-overlay"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1750646674,
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "65162ae665154e0eddb395166bd4956358981dd0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/cuda-shell/flake.nix b/templates/cuda-shell/flake.nix
new file mode 100644
index 00000000..3e1475d1
--- /dev/null
+++ b/templates/cuda-shell/flake.nix
@@ -0,0 +1,124 @@
+{
+  description = "CUDA development environment";
+
+  inputs = {
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+  };
+
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    ...
+  }:
+    flake-utils.lib.eachSystem ["x86_64-linux"] (
+      system: let
+        pkgs = import nixpkgs {
+          inherit system;
+          config.allowUnfree = true;
+        };
+
+        rooted = exec:
+          builtins.concatStringsSep "\n"
+          [
+            ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+            exec
+          ];
+
+        scripts = {
+          dx = {
+            exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+            description = "Edit flake.nix";
+          };
+        };
+
+        scriptPackages =
+          pkgs.lib.mapAttrs
+          (
+            name: script:
+              pkgs.writeShellApplication {
+                inherit name;
+                text = script.exec;
+                runtimeInputs = script.deps or [];
+                runtimeEnv = script.env or {};
+              }
+          )
+          scripts;
+      in {
+        devShells = let
+          shellHook = ''
+            export SSL_CERT_FILE="${pkgs.cacert}/etc/ssl/certs/ca-bundle.crt"
+            export NIX_SSL_CERT_FILE="${pkgs.cacert}/etc/ssl/certs/ca-bundle.crt"
+            export LD_LIBRARY_PATH=/run/opengl-driver/lib:$LD_LIBRARY_PATH
+          '';
+
+          env = {
+            RUST_BACKTRACE = "1";
+            DEV = "1";
+            LOCAL = "1";
+            PYTHONNOUSERSITE = "1";
+            CUDA_HOME = "${pkgs.cudaPackages.cudatoolkit}";
+            LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:${pkgs.lib.makeLibraryPath [
+              pkgs.stdenv.cc.cc.lib
+              pkgs.cudaPackages.cudatoolkit
+              pkgs.stdenv.cc.cc
+              pkgs.glibc
+              pkgs.glib
+              pkgs.libGL
+              pkgs.openssl
+              pkgs.cacert
+              pkgs.libglvnd
+              pkgs.xorg.libX11
+              pkgs.xorg.libXrandr
+              pkgs.xorg.libXinerama
+              pkgs.xorg.libXcursor
+              pkgs.xorg.libXi
+              pkgs.opencv4
+            ]}:/run/opengl-driver/lib";
+          };
+
+          corePackages = with pkgs; [
+            # Nix development tools
+            alejandra
+            nixd
+            nil
+            statix
+            deadnix
+          ];
+
+          systemPackages = with pkgs; [
+            pkg-config
+            protobuf
+            openssl
+            opencv4
+            cacert
+            ninja
+            stdenv.cc
+            libglvnd
+          ];
+
+          # Platform-specific packages
+          linuxPackages = [
+            pkgs.libGL
+            pkgs.mesa
+            pkgs.xorg.libX11
+            pkgs.xorg.libXrandr
+            pkgs.xorg.libXinerama
+            pkgs.xorg.libXcursor
+            pkgs.xorg.libXi
+          ];
+
+          shell-packages =
+            corePackages
+            ++ systemPackages
+            ++ linuxPackages
+            ++ builtins.attrValues scriptPackages;
+        in {
+          default = pkgs.mkShell {
+            inherit shellHook env;
+            packages = shell-packages;
+          };
+        };
+      }
+    );
+}
diff --git a/templates/devshell/.envrc b/templates/devshell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/devshell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/devshell/.gitignore b/templates/devshell/.gitignore
new file mode 100644
index 00000000..2bbdbfe1
--- /dev/null
+++ b/templates/devshell/.gitignore
@@ -0,0 +1,2 @@
+.direnv
+result
diff --git a/templates/devshell/flake.lock b/templates/devshell/flake.lock
new file mode 100644
index 00000000..08cfe1df
--- /dev/null
+++ b/templates/devshell/flake.lock
@@ -0,0 +1,81 @@
+{
+  "nodes": {
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1753121425,
+        "narHash": "sha256-TVcTNvOeWWk1DXljFxVRp+E0tzG1LhrVjOGGoMHuXio=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "644e0fc48951a860279da645ba77fe4a6e814c5e",
+        "type": "github"
+      },
+      "original": {
+        "id": "flake-parts",
+        "type": "indirect"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1753091883,
+        "narHash": "sha256-oVZt8VRJkO2Gytc7D2Pfqqy7wTnSECzdKPnoL9z8iFA=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "2baf8e1658cba84a032c3a8befb1e7b06629242a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1751159883,
+        "narHash": "sha256-urW/Ylk9FIfvXfliA1ywh75yszAbiTEVgpPeinFyVZo=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "14a40a1d7fb9afa4739275ac642ed7301a9ba1ab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-parts": "flake-parts",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753006367,
+        "narHash": "sha256-tzbhc4XttkyEhswByk5R38l+ztN9UDbnj0cTcP6Hp9A=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "421b56313c65a0815a52b424777f55acf0b56ddf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/devshell/flake.nix b/templates/devshell/flake.nix
new file mode 100644
index 00000000..3872d575
--- /dev/null
+++ b/templates/devshell/flake.nix
@@ -0,0 +1,41 @@
+{
+  description = "A development shell";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = inputs @ {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = nixpkgs.legacyPackages.${system};
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        buildInputs = with pkgs; [
+          just
+        ];
+
+        shellHook = ''
+          echo "Welcome to the devshell!"
+        '';
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/go-shell/.claude/settings.json b/templates/go-shell/.claude/settings.json
new file mode 100644
index 00000000..0967ef42
--- /dev/null
+++ b/templates/go-shell/.claude/settings.json
@@ -0,0 +1 @@
+{}
diff --git a/templates/go-shell/.envrc b/templates/go-shell/.envrc
new file mode 100644
index 00000000..b6abc74f
--- /dev/null
+++ b/templates/go-shell/.envrc
@@ -0,0 +1,3 @@
+use flake
+
+layout go
diff --git a/templates/go-shell/.gitignore b/templates/go-shell/.gitignore
new file mode 100644
index 00000000..571f358b
--- /dev/null
+++ b/templates/go-shell/.gitignore
@@ -0,0 +1,7 @@
+.direnv
+result
+*.test
+logs
+*.log
+.DS_Store
+*.out
diff --git a/templates/go-shell/flake.lock b/templates/go-shell/flake.lock
new file mode 100644
index 00000000..cd6f5447
--- /dev/null
+++ b/templates/go-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1756911493,
+        "narHash": "sha256-6n/n1GZQ/vi+LhFXMSyoseKdNfc2QQaSBXJdgamrbkE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "c6a788f552b7b7af703b1a29802a7233c0067908",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1756662192,
+        "narHash": "sha256-F1oFfV51AE259I85av+MAia221XwMHCOtZCMcZLK2Jk=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "1aabc6c05ccbcbf4a635fb7a90400e44282f61c4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/go-shell/flake.nix b/templates/go-shell/flake.nix
new file mode 100644
index 00000000..5decb5bb
--- /dev/null
+++ b/templates/go-shell/flake.nix
@@ -0,0 +1,129 @@
+{
+  description = "A development shell for go";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [
+          (final: prev: {
+            # Add your overlays here
+            # Example:
+            # my-overlay = final: prev: {
+            #   my-package = prev.callPackage ./my-package { };
+            # };
+            final.buildGoModule = prev.buildGo125Module;
+            buildGoModule = prev.buildGo125Module;
+          })
+        ];
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        lint = {
+          exec = ''
+            golangci-lint run
+          '';
+          description = "Run golangci-lint";
+        };
+        tests = {
+          exec = rooted ''
+            gotestsum --format short-verbose "$REPO_ROOT"/...
+          '';
+          description = "Run tests";
+          deps = [pkgs.gotestsum];
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+
+      treefmtModule = {
+        projectRootFile = "flake.nix";
+        programs = {
+          alejandra.enable = true; # Nix formatter
+          gofmt.enable = true; # Go formatter
+          golines.enable = true; # Go formatter (Shorter lines)
+          goimports.enable = true; # Go formatter (Organize/Clean imports)
+        };
+      };
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            alejandra # Nix
+            nixd
+            statix
+            deadnix
+
+            go_1_25 # Go Tools
+            air
+            golangci-lint
+            gopls
+            revive
+            golines
+            golangci-lint-langserver
+            gomarkdoc
+            gotests
+            gotools
+            gotestsum
+            reftools
+            pprof
+            graphviz
+            goreleaser
+          ]
+          ++ builtins.attrValues scriptPackages;
+      };
+
+      # Example package build (uncomment and customize for your project)
+      # packages = {
+      #   default = pkgs.buildGoModule {
+      #     pname = "my-go-project";
+      #     version = "0.0.1";
+      #     src = ./.;  # Use ./. instead of self for your project source
+      #     vendorHash = null;  # Set to the hash of your go dependencies or use vendorHash = "sha256-AAAA..."; after first build
+      #     meta = with pkgs.lib; {
+      #       description = "My Go project";
+      #       homepage = "https://github.com/connerohnesorge/my-go-project";
+      #       license = licenses.asl20;
+      #       maintainers = with maintainers; [connerohnesorge];
+      #     };
+      #   };
+      # };
+
+      formatter = treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/laravel-shell/.envrc b/templates/laravel-shell/.envrc
new file mode 100644
index 00000000..3550a30f
--- /dev/null
+++ b/templates/laravel-shell/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/templates/laravel-shell/.gitignore b/templates/laravel-shell/.gitignore
new file mode 100644
index 00000000..2bbdbfe1
--- /dev/null
+++ b/templates/laravel-shell/.gitignore
@@ -0,0 +1,2 @@
+.direnv
+result
diff --git a/templates/laravel-shell/composer.json b/templates/laravel-shell/composer.json
new file mode 100644
index 00000000..03f856af
--- /dev/null
+++ b/templates/laravel-shell/composer.json
@@ -0,0 +1,15 @@
+{
+    "name": "template/laravel-shell",
+    "description": "Laravel development shell template",
+    "type": "project",
+    "require": {
+        "php": "^8.4"
+    },
+    "config": {
+        "preferred-install": "dist",
+        "sort-packages": true,
+        "optimize-autoloader": true
+    },
+    "minimum-stability": "stable",
+    "prefer-stable": true
+}
diff --git a/templates/laravel-shell/flake.lock b/templates/laravel-shell/flake.lock
new file mode 100644
index 00000000..c56f0699
--- /dev/null
+++ b/templates/laravel-shell/flake.lock
@@ -0,0 +1,268 @@
+{
+  "nodes": {
+    "flake-compat": {
+      "locked": {
+        "lastModified": 1746162366,
+        "narHash": "sha256-5SSSZ/oQkwfcAz/o/6TlejlVGqeK08wyREBQ5qFFPhM=",
+        "owner": "nix-community",
+        "repo": "flake-compat",
+        "rev": "0f158086a2ecdbb138cd0429410e44994f1b7e4b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-compat_2": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1747046372,
+        "narHash": "sha256-CIVLLkVgvHYbgI2UpXvIIBJ12HWgX+fjA8Xf8PUmqCY=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "9100a0f413b0c601e0533d1d94ffd501ce2e7885",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1751413152,
+        "narHash": "sha256-Tyw1RjYEsp5scoigs1384gIg6e0GoBVjms4aXFfRssQ=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "77826244401ea9de6e3bac47c2db46005e1f30b5",
+        "type": "github"
+      },
+      "original": {
+        "id": "flake-parts",
+        "type": "indirect"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nix-phps": {
+      "inputs": {
+        "flake-compat": "flake-compat_2",
+        "nixpkgs": "nixpkgs",
+        "utils": "utils"
+      },
+      "locked": {
+        "lastModified": 1753042534,
+        "narHash": "sha256-1p4/mNOksFzeyE6VJecofys4sWAjkbzKlbPc28C475o=",
+        "owner": "fossar",
+        "repo": "nix-phps",
+        "rev": "70b00330fbc32d5554389e7736c51220de910bf0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "fossar",
+        "repo": "nix-phps",
+        "type": "github"
+      }
+    },
+    "nix-shell": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "flake-parts": "flake-parts",
+        "nix-phps": "nix-phps",
+        "nixpkgs": "nixpkgs_2",
+        "systems": "systems_3"
+      },
+      "locked": {
+        "lastModified": 1754922134,
+        "narHash": "sha256-jLHGMyTSYhGBTb1FDaB5wImQV5uxp2eLcquYzm3FPuE=",
+        "owner": "loophp",
+        "repo": "nix-shell",
+        "rev": "ce0889cb132b6b91fee1d13eafd17c4c954db2e4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "loophp",
+        "repo": "nix-shell",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1752900028,
+        "narHash": "sha256-dPALCtmik9Wr14MGqVXm+OQcv7vhPBXcWNIOThGnB/Q=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "6b4955211758ba47fac850c040a27f23b9b4008f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1751159883,
+        "narHash": "sha256-urW/Ylk9FIfvXfliA1ywh75yszAbiTEVgpPeinFyVZo=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "14a40a1d7fb9afa4739275ac642ed7301a9ba1ab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1752900028,
+        "narHash": "sha256-dPALCtmik9Wr14MGqVXm+OQcv7vhPBXcWNIOThGnB/Q=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "6b4955211758ba47fac850c040a27f23b9b4008f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_3": {
+      "locked": {
+        "lastModified": 1754725699,
+        "narHash": "sha256-iAcj9T/Y+3DBy2J0N+yF9XQQQ8IEb5swLFzs23CdP88=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "85dbfc7aaf52ecb755f87e577ddbe6dbbdbc1054",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nix-shell": "nix-shell",
+        "nixpkgs": "nixpkgs_3",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_2": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_3": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754847726,
+        "narHash": "sha256-2vX8QjO5lRsDbNYvN9hVHXLU6oMl+V/PsmIiJREG4rE=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "7d81f6fb2e19bf84f1c65135d1060d829fae2408",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "utils": {
+      "inputs": {
+        "systems": "systems_2"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/laravel-shell/flake.nix b/templates/laravel-shell/flake.nix
new file mode 100644
index 00000000..111332dd
--- /dev/null
+++ b/templates/laravel-shell/flake.nix
@@ -0,0 +1,203 @@
+{
+  description = "Example flake for PHP development";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    nix-shell.url = "github:loophp/nix-shell";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = inputs @ {
+    self,
+    flake-utils,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import inputs.nixpkgs {
+        inherit system;
+        overlays = [inputs.nix-shell.overlays.default];
+        config.allowUnfree = true;
+      };
+
+      php = pkgs.api.buildPhpFromComposer {
+        src = inputs.self;
+        php = pkgs.php84; # Updated to php84 for latest features and compatibility
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        cx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/composer.json'';
+          description = "Edit composer.json";
+        };
+        ax = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/artisan'';
+          description = "Edit artisan";
+        };
+        lx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/.env'';
+          description = "Edit .env file";
+        };
+        lint = {
+          exec = rooted ''cd "$REPO_ROOT" && ./vendor/bin/pint'';
+          description = "Run Laravel Pint linting";
+        };
+        tests = {
+          exec = rooted ''cd "$REPO_ROOT" && ./vendor/bin/pest'';
+          description = "Run Pest tests";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShellNoCC {
+        name = "php-devshell";
+        buildInputs =
+          [
+            php
+            php.packages.composer
+            php.packages.phpstan
+            pkgs.phpunit
+            pkgs.laravel
+            self.packages.${system}.satis
+          ]
+          ++ builtins.attrValues scriptPackages;
+      };
+
+      checks = {
+        inherit (self.packages.${system}) satis;
+      };
+
+      packages = {
+        satis = php.buildComposerProject {
+          pname = "satis";
+          version = "3.0.0-dev";
+          src = pkgs.fetchFromGitHub {
+            owner = "composer";
+            repo = "satis";
+            rev = "5c2456800f331d2895996bb681fd96acafe5f031";
+            hash = "sha256-BYNpJpzBN6iBpesvdrgvpyYs0+MjhmKzDEz5CUH7xlI=";
+          };
+          vendorHash = "sha256-SpKS2GLxh829MceZTsmOBAZikDkARHg1koKk9cUazxM=";
+          meta.mainProgram = "satis";
+        };
+      };
+
+      apps = let
+        lib = pkgs.lib;
+      in {
+        # mezzio-skeleton = {
+        #   type = "app";
+        #   program = lib.getExe (
+        #     pkgs.writeShellApplication {
+        #       name = "mezzio-skeleton-demo";
+        #       runtimeInputs = [php];
+        #       text = ''
+        #         ${lib.getExe php} -S 0.0.0.0:8080 -t ${self.packages.${system}.mezzio}/share/php/${self.packages.${system}.mezzio.pname}/public/
+        #       '';
+        #     }
+        #   );
+        # }; # Disabled - mezzio package not defined
+        # nix run .#satis -- --version
+        satis = {
+          type = "app";
+          program = lib.getExe (
+            pkgs.writeShellApplication {
+              name = "satis";
+              text = ''
+                ${lib.getExe self.packages.${system}.satis} "$@"
+              '';
+            }
+          );
+        };
+        # nix run .#composer -- --version
+        composer = {
+          type = "app";
+          program = lib.getExe (
+            pkgs.writeShellApplication {
+              name = "composer";
+              runtimeInputs = [
+                php
+                php.packages.composer
+              ];
+              text = ''
+                ${lib.getExe php.packages.composer} "$@"
+              '';
+            }
+          );
+        };
+        # nix run .#grumphp -- --version
+        grumphp = {
+          type = "app";
+          program = lib.getExe (
+            pkgs.writeShellApplication {
+              name = "grumphp";
+              runtimeInputs = [php];
+              text = ''
+                ${lib.getExe php.packages.grumphp} "$@"
+              '';
+            }
+          );
+        };
+        # nix run .#phpunit -- --version
+        phpunit = {
+          type = "app";
+          program = lib.getExe (
+            pkgs.writeShellApplication {
+              name = "phpunit";
+              runtimeInputs = [php];
+              text = ''
+                ${lib.getExe pkgs.phpunit} "$@"
+              '';
+            }
+          );
+        };
+        # nix run .#phpstan -- --version
+        phpstan = {
+          type = "app";
+          program = lib.getExe (
+            pkgs.writeShellApplication {
+              name = "phpstan";
+              runtimeInputs = [
+                php
+                php.packages.phpstan
+              ];
+              text = ''
+                ${lib.getExe php.packages.phpstan} "$@"
+              '';
+            }
+          );
+        };
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+          };
+        };
+      in
+        inputs.treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/latex-shell/.envrc b/templates/latex-shell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/latex-shell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/latex-shell/.gitignore b/templates/latex-shell/.gitignore
new file mode 100644
index 00000000..fa5c571f
--- /dev/null
+++ b/templates/latex-shell/.gitignore
@@ -0,0 +1,35 @@
+.direnv
+result
+
+# LaTeX auxiliary files
+*.aux
+*.bbl
+*.blg
+*.fdb_latexmk
+*.fls
+*.lof
+*.log
+*.lot
+*.out
+*.toc
+*.synctex.gz
+*.bcf
+*.run.xml
+*.nav
+*.snm
+*.vrb
+
+# LaTeX intermediate files
+*.dvi
+*.ps
+
+# BibTeX
+*.bib.bak
+*.bib.sav
+
+# Latexmk
+*.fls
+*.fdb_latexmk
+
+# PDFs (optional - uncomment if you don't want to track PDFs)
+# *.pdf
diff --git a/templates/latex-shell/flake.lock b/templates/latex-shell/flake.lock
new file mode 100644
index 00000000..86e9f54f
--- /dev/null
+++ b/templates/latex-shell/flake.lock
@@ -0,0 +1,159 @@
+{
+  "nodes": {
+    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1765121682,
+        "narHash": "sha256-4VBOP18BFeiPkyhy9o4ssBNQEvfvv1kXkasAYd0+rrA=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "65f23138d8d09a92e30f1e5c87611b23ef451bf3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-compat_2": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1761588595,
+        "narHash": "sha256-XKUZz9zewJNUj46b4AJdiRZJAvSZ0Dqj2BNfXvFlJC4=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "f387cd2afec9419c8ee37694406ca490c3f34ee5",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "git-hooks": {
+      "inputs": {
+        "flake-compat": "flake-compat_2",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765016596,
+        "narHash": "sha256-rhSqPNxDVow7OQKi4qS5H8Au0P4S3AYbawBSmJNUtBQ=",
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "rev": "548fc44fca28a5e81c5d6b846e555e6b9c2a5a3c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "type": "github"
+      }
+    },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "git-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1765270179,
+        "narHash": "sha256-g2a4MhRKu4ymR4xwo+I+auTknXt/+j37Lnf0Mvfl1rE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "677fbe97984e7af3175b6c121f3c39ee5c8d62c9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "flake-utils": "flake-utils",
+        "git-hooks": "git-hooks",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1762938485,
+        "narHash": "sha256-AlEObg0syDl+Spi4LsZIBrjw+snSVU4T8MOeuZJUJjM=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "5b4ee75aeefd1e2d5a1cc43cf6ba65eba75e83e4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/latex-shell/flake.nix b/templates/latex-shell/flake.nix
new file mode 100644
index 00000000..95b79f6e
--- /dev/null
+++ b/templates/latex-shell/flake.nix
@@ -0,0 +1,201 @@
+{
+  description = "A complete LaTeX development environment with Overleaf-equivalent features";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+    git-hooks.url = "github:cachix/git-hooks.nix";
+    git-hooks.inputs.nixpkgs.follows = "nixpkgs";
+    # Used for shell.nix
+    flake-compat = {
+      url = "github:edolstra/flake-compat";
+      flake = false;
+    };
+  };
+
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    git-hooks,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      isLinux = builtins.elem system ["x86_64-linux" "aarch64-linux"];
+      pkgs = import nixpkgs {
+        inherit system;
+        config.allowUnfree = true;
+        config.cudaSupport = isLinux;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      # Helper scripts for common LaTeX workflows
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        ltx-compile = {
+          exec = ''
+            if [ -z "$1" ]; then
+              echo "Usage: ltx-compile <file.tex> [engine]"
+              echo "Engines: pdf (default), xe, lua"
+              exit 1
+            fi
+            ENGINE="''${2:-pdf}"
+            latexmk -"$ENGINE"latex -interaction=nonstopmode -file-line-error "$1"
+          '';
+          description = "Compile LaTeX document";
+          deps = with pkgs; [texliveFull];
+        };
+        ltx-watch = {
+          exec = ''
+            if [ -z "$1" ]; then
+              echo "Usage: ltx-watch <file.tex> [engine]"
+              echo "Engines: pdf (default), xe, lua"
+              exit 1
+            fi
+            ENGINE="''${2:-pdf}"
+            latexmk -"$ENGINE"latex -pvc -interaction=nonstopmode -file-line-error "$1"
+          '';
+          description = "Watch and auto-compile LaTeX document";
+          deps = with pkgs; [texliveFull];
+        };
+        ltx-wordcount = {
+          exec = ''
+            if [ -z "$1" ]; then
+              echo "Usage: ltx-wordcount <file.tex>"
+              exit 1
+            fi
+            texcount -inc -incbib "$1"
+          '';
+          description = "Count words in LaTeX document";
+          deps = with pkgs; [texliveFull];
+        };
+        lint = {
+          exec = ''
+            chktex main.tex
+            chktex sections/*.tex
+            chktex poster/poster.tex
+            chktex poster/poster-config.tex
+            chktex poster/sections/*.tex
+          '';
+          description = "Lint LaTeX document(s)";
+          deps = with pkgs; [
+            texliveFull
+          ];
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+
+      treefmtModule = {
+        projectRootFile = "flake.nix";
+        programs = {
+          alejandra.enable = true; # Nix formatter
+          texfmt.enable = true; # TeX formatter
+          black.enable = true; # Python formatter
+        };
+      };
+
+      preCommitCheck = git-hooks.lib.${system}.run {
+        src = ./.;
+        hooks = {
+          chktex.enable = true;
+        };
+      };
+    in {
+      devShells.default = pkgs.mkShell ({
+          name = "latex-dev";
+
+          # Available packages on https://search.nixos.org/packages
+          packages = with pkgs;
+            [
+              # Nix tooling
+              alejandra
+              nixd
+              statix
+              deadnix
+
+              # Core LaTeX - Full TeX Live distribution
+              texliveFull # Includes all LaTeX packages, fonts, and tools
+
+              # LaTeX language server and IDE support
+              texlab # LSP for LaTeX
+              ltex-ls # Grammar/spell checking LSP
+
+              # Additional utilities
+              pandoc # Document conversion (Markdown ↔ LaTeX)
+              ghostscript # PostScript/PDF manipulation
+              poppler-utils # PDF utilities (pdfinfo, pdftotext, etc.)
+              watchexec # File watcher alternative to latexmk -pvc
+              pyrefly
+
+              graphviz
+              # Python tooling for training scripts
+              uv # Python package manager
+              ruff
+            ]
+            ++ builtins.attrValues scriptPackages
+            ++ preCommitCheck.enabledPackages;
+
+          shellHook =
+            preCommitCheck.shellHook
+            + ''
+              echo "🎓 LaTeX Development Environment 🎓"
+            '';
+        }
+        // pkgs.lib.optionalAttrs isLinux {
+          env.TRITON_LIBCUDA_PATH = "/run/opengl-driver/lib";
+          env.LD_LIBRARY_PATH =
+            pkgs.lib.makeLibraryPath [
+              pkgs.glib
+              pkgs.libGL
+              pkgs.cudaPackages.cudatoolkit
+              pkgs.cudaPackages.cudnn
+              pkgs.stdenv.cc.cc.lib
+            ]
+            + ":/run/opengl-driver/lib";
+        });
+
+      # Minimal CI/CD devShell optimized for automated builds
+      devShells.ci = pkgs.mkShell {
+        name = "latex-ci";
+
+        # Minimal packages needed for CI builds and testing
+        packages = with pkgs;
+          [
+            # Core LaTeX for compilation
+            texliveFull
+
+            # PDF utilities for validation
+            poppler-utils
+          ]
+          ++ builtins.attrValues scriptPackages
+          ++ preCommitCheck.enabledPackages;
+      };
+
+      formatter = treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+
+      checks.pre-commit-check = preCommitCheck;
+    });
+}
diff --git a/templates/latex-shell/shell.nix b/templates/latex-shell/shell.nix
new file mode 100644
index 00000000..c6801d77
--- /dev/null
+++ b/templates/latex-shell/shell.nix
@@ -0,0 +1,12 @@
+(import
+  (
+    let
+      inherit ((builtins.fromJSON (builtins.readFile ./flake.lock)).nodes) flake-compat;
+    in
+      fetchTarball {
+        url = "https://github.com/edolstra/flake-compat/archive/${flake-compat.locked.rev}.tar.gz";
+        sha256 = flake-compat.locked.narHash;
+      }
+  )
+  {src = ./.;})
+.shellNix
diff --git a/templates/lua-shell/.envrc b/templates/lua-shell/.envrc
new file mode 100644
index 00000000..3550a30f
--- /dev/null
+++ b/templates/lua-shell/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/templates/lua-shell/flake.lock b/templates/lua-shell/flake.lock
new file mode 100644
index 00000000..40f9f4a7
--- /dev/null
+++ b/templates/lua-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1753091883,
+        "narHash": "sha256-oVZt8VRJkO2Gytc7D2Pfqqy7wTnSECzdKPnoL9z8iFA=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "2baf8e1658cba84a032c3a8befb1e7b06629242a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753006367,
+        "narHash": "sha256-tzbhc4XttkyEhswByk5R38l+ztN9UDbnj0cTcP6Hp9A=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "421b56313c65a0815a52b424777f55acf0b56ddf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/lua-shell/flake.nix b/templates/lua-shell/flake.nix
new file mode 100644
index 00000000..675378fb
--- /dev/null
+++ b/templates/lua-shell/flake.nix
@@ -0,0 +1,82 @@
+{
+  description = "A development shell for lua";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = inputs @ {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            alejandra # Nix
+            nixd
+            statix
+            deadnix
+
+            lua # Lua Tools
+            luajit
+            lua-language-server
+            stylua
+            selene
+            luarocks
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Welcome to the lua devshell!"
+        '';
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            stylua.enable = true; # Lua formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/ocaml-shell/.cursorrules b/templates/ocaml-shell/.cursorrules
new file mode 100644
index 00000000..6426b5d2
--- /dev/null
+++ b/templates/ocaml-shell/.cursorrules
@@ -0,0 +1,181 @@
+# ===============================================
+# Cursor IDE Rules for OCaml Template Project
+# ===============================================
+# This file configures Cursor IDE for optimal OCaml development
+# Place this file in your project root as .cursorrules
+
+# Project Context
+This is a modern OCaml project template using:
+- OCaml 5.3.0 with multicore support
+- Dune 3.19 as the build system
+- Modern libraries: Base, Core, Lwt, Yojson, Cmdliner
+- Nix flakes for reproducible development environment
+- Comprehensive testing with Alcotest and QCheck
+- Documentation with ODocs
+
+# Code Style and Standards
+## OCaml Style Guidelines
+- Use 2-space indentation (configured in .ocamlformat)
+- Follow Jane Street's Base/Core conventions
+- Prefer `let*` syntax for monadic operations (Lwt, Result)
+- Use meaningful module signatures
+- Document public functions with (** ... *) comments
+- Use `open Base` and specific opens like `open Lwt.Syntax`
+
+## Naming Conventions
+- Module names: PascalCase (e.g., `Json_utils`)
+- Function names: snake_case (e.g., `fibonacci`, `is_prime`)
+- Type names: lowercase (e.g., `person`, `config`)
+- Constants: UPPERCASE (e.g., `DEFAULT_PORT`)
+- Private functions: prefix with underscore (e.g., `_internal_helper`)
+
+## File Organization
+- Library code: `lib/` directory
+- Executables: `bin/` directory  
+- Tests: `test/` directory
+- Examples: `examples/` directory
+- Each module should have a corresponding `.mli` interface file for public modules
+
+# Development Workflow
+## Build Commands
+- `nix develop` - Enter development shell
+- `dune build` - Build the project
+- `dune exec ocaml_template` - Run main executable
+- `dune exec examples/simple_example.exe` - Run examples
+- `dune runtest` - Run tests
+- `nix build` - Create installable packages
+
+## Code Quality
+- Always run `dune build @fmt` before committing
+- Use `dune build @doc` to generate documentation
+- Run tests frequently with `dune runtest`
+- Use `merlin` for IDE integration (auto-configured)
+
+# AI Assistant Instructions
+## Code Generation Rules
+1. **Always follow OCaml best practices**:
+   - Use pattern matching extensively
+   - Avoid exceptions in favor of `Result.t` types
+   - Use `Option.t` for nullable values
+   - Prefer immutable data structures
+
+2. **Error Handling**:
+   - Use `Result.t` for operations that can fail
+   - Use `Or_error.t` from Base for detailed error information
+   - Handle errors at appropriate abstraction levels
+   - Provide meaningful error messages
+
+3. **Type Safety**:
+   - Define custom types for domain concepts
+   - Use phantom types for additional safety when appropriate
+   - Avoid using `Obj.magic` or other unsafe operations
+   - Prefer explicit over implicit type conversions
+
+4. **Performance Considerations**:
+   - Be mindful of tail recursion for large lists
+   - Use appropriate data structures (Array for random access, List for sequential)
+   - Consider using `Core.Sequence` for lazy evaluation
+   - Profile performance-critical code
+
+## Library Usage Guidelines
+1. **Base/Core Libraries**:
+   - Prefer `Base` and `Core` over standard library
+   - Use `Stdio` for I/O operations
+   - Use `Core.Command` for CLI applications (alternative to Cmdliner)
+
+2. **Async Programming**:
+   - Use `Lwt` for async operations
+   - Use `let*` syntax for monadic composition
+   - Handle timeouts and cancellation appropriately
+   - Avoid blocking operations in async contexts
+
+3. **JSON Handling**:
+   - Use `Yojson` for JSON operations
+   - Define proper type conversions with `to_json`/`from_json` functions
+   - Handle JSON parsing errors gracefully
+
+4. **Testing**:
+   - Write unit tests with `Alcotest`
+   - Use `QCheck` for property-based testing
+   - Test both happy path and error cases
+   - Use `Lwt` test helpers for async tests
+
+## Code Review Checklist
+When reviewing or generating code, ensure:
+- [ ] All functions have appropriate type annotations
+- [ ] Error cases are properly handled
+- [ ] Code follows formatting standards (will be enforced by .ocamlformat)
+- [ ] Public functions are documented
+- [ ] Tests are included for new functionality
+- [ ] No unused opens or variables
+- [ ] Memory safety (no uncaught exceptions in critical paths)
+
+## Dune Configuration
+- Use `(preprocess (pps ppx_jane))` for Jane Street PPX extensions
+- Specify library dependencies explicitly in `dune` files
+- Use `(libraries ...)` not `(library ...)` in executable stanzas
+- Include `(public_name ...)` for installable executables
+
+## Common Patterns
+### Module Structure
+```ocaml
+(* Interface file (.mli) *)
+type t
+val create : string -> t Or_error.t
+val to_string : t -> string
+
+(* Implementation file (.ml) *)
+open Base
+
+type t = {
+  field1 : string;
+  field2 : int;
+}
+
+let create str =
+  if String.is_empty str
+  then Or_error.error_string "Empty string not allowed"
+  else Ok { field1 = str; field2 = String.length str }
+
+let to_string { field1; field2 } =
+  Printf.sprintf "%s (%d)" field1 field2
+```
+
+### Error Handling
+```ocaml
+let safe_operation x =
+  match operation x with
+  | Ok result -> process result
+  | Error err -> 
+    Logs.err (fun m -> m "Operation failed: %s" (Error.to_string_hum err));
+    Error err
+```
+
+### Async Operations
+```ocaml
+let async_example () =
+  let open Lwt.Syntax in
+  let* data = fetch_data () in
+  let* processed = process_data data in
+  Lwt.return (Ok processed)
+```
+
+# Project-Specific Notes
+## Available Modules
+- `Ocaml_template.Math` - Mathematical utilities
+- `Ocaml_template.Json_utils` - JSON serialization helpers
+- `Ocaml_template.Async_utils` - Lwt async utilities  
+- `Ocaml_template.Logger` - Structured logging
+
+## Build Targets
+- `ocaml_template` - Main CLI application
+- `simple_example` - Example program demonstrating library features
+- Library can be used by other projects via `dune-project` dependencies
+
+## Testing Strategy
+- Unit tests for pure functions
+- Property-based tests for mathematical operations
+- Integration tests for CLI functionality
+- Mock external dependencies in tests
+
+Remember: This template demonstrates modern OCaml practices. Use it as a reference for idiomatic OCaml code patterns and project structure.
\ No newline at end of file
diff --git a/templates/ocaml-shell/.envrc b/templates/ocaml-shell/.envrc
new file mode 100644
index 00000000..dd6cb743
--- /dev/null
+++ b/templates/ocaml-shell/.envrc
@@ -0,0 +1,3 @@
+# Automatically enter the Nix development shell when entering this directory
+# Requires direnv: https://direnv.net/
+use flake
\ No newline at end of file
diff --git a/templates/ocaml-shell/.gitignore b/templates/ocaml-shell/.gitignore
new file mode 100644
index 00000000..55c40f20
--- /dev/null
+++ b/templates/ocaml-shell/.gitignore
@@ -0,0 +1,151 @@
+# ===============================================
+# OCaml Template Project .gitignore
+# ===============================================
+
+# OCaml Build Artifacts
+# ---------------------
+_build/                    # Dune build directory
+*.install                  # Install files
+*.merlin                   # Merlin configuration
+*.cmi                      # Compiled interface files
+*.cmo                      # Compiled bytecode object files
+*.cmx                      # Compiled native object files
+*.o                        # Object files
+*.a                        # Archive files
+*.cmxa                     # Native archive files
+*.cma                      # Bytecode archive files
+*.cmxs                     # Native plugin files
+*.byte                     # Bytecode executables
+*.native                   # Native executables
+*.exe                      # Windows executables
+
+# Dune Generated Files
+# -------------------
+.dune/                     # Dune cache
+dune-project.dev           # Development dune-project
+*.opam                     # Generated opam files (when auto-generated)
+.merlin                    # Generated merlin config
+
+# Package Management
+# ------------------
+_opam/                     # Local opam switch
+.opam/                     # Opam directory
+*.opam.locked              # Opam lock files
+opam.locked                # Opam lock file
+
+# Development Environment
+# -----------------------
+.direnv/                   # Direnv cache
+.envrc.local              # Local environment overrides
+
+# Nix
+# ---
+result                     # Nix build result
+result-*                   # Nix build results with names
+.gcroots                   # Nix garbage collection roots
+
+# IDE and Editor Files
+# -------------------
+.vscode/                   # VS Code settings
+.idea/                     # IntelliJ/IDEA
+*.swp                      # Vim swap files
+*.swo                      # Vim swap files  
+*~                         # Emacs backup files
+\#*\#                      # Emacs auto-save files
+.#*                        # Emacs lock files
+*.orig                     # Merge conflict originals
+.metals/                   # Scala Metals LSP
+.bloop/                    # Bloop build server
+.bsp/                      # Build Server Protocol
+
+# AI Development Tools
+# -------------------
+.cursor/                   # Cursor IDE cache
+.continue/                 # Continue.dev cache
+.aider*                    # Aider chat history
+.claude*                   # Claude chat history
+.copilot*                  # GitHub Copilot cache
+.codeium/                  # Codeium cache
+
+# Documentation Generation
+# ------------------------
+docs/_build/               # Documentation build
+_doc/                      # Generated documentation
+*.html                     # Generated HTML files (unless explicitly needed)
+*.pdf                      # Generated PDF files (unless explicitly needed)
+
+# Testing and Coverage
+# -------------------
+bisect*.coverage           # Bisect coverage files
+bisect*.out               # Bisect output files
+coverage/                 # Coverage reports
+*.coverage                # Coverage data
+junit.xml                 # JUnit test reports
+test-results/             # Test result directories
+
+# Logs and Temporary Files
+# ------------------------
+*.log                      # Log files
+*.tmp                      # Temporary files
+*.temp                     # Temporary files
+*.cache                    # Cache files
+.cache/                    # Cache directories
+
+# OS Generated Files
+# -----------------
+.DS_Store                  # macOS Finder info
+.DS_Store?                 # macOS Finder info
+._*                        # macOS resource forks
+.Spotlight-V100            # macOS Spotlight
+.Trashes                   # macOS Trash
+ehthumbs.db               # Windows image cache
+Thumbs.db                 # Windows image cache
+Desktop.ini               # Windows folder config
+
+# Backup and Archive Files
+# ------------------------
+*.bak                      # Backup files
+*.backup                   # Backup files
+*.old                      # Old versions
+*.save                     # Save files
+*.tar.gz                   # Archives (unless explicitly needed)
+*.zip                      # Archives (unless explicitly needed)
+*.tgz                      # Archives (unless explicitly needed)
+
+# Security and Secrets
+# --------------------
+.env                       # Environment variables
+.env.local                 # Local environment variables
+.env.*.local              # Environment variable files
+secrets.json              # Secret configuration
+*.key                      # Private keys
+*.pem                      # Certificate files
+*.p12                      # Certificate files
+auth.json                 # Authentication files
+
+# Profiling and Performance
+# -------------------------
+*.prof                     # Profiling output
+perf.data                 # Linux perf data
+perf.data.old             # Linux perf data
+*.trace                    # Trace files
+*.memtrace                # Memory trace files
+
+# Development Databases
+# ---------------------
+*.db                       # SQLite databases
+*.sqlite                   # SQLite databases
+*.sqlite3                 # SQLite databases
+
+# Node.js (if using for tooling)
+# ------------------------------
+node_modules/             # Node packages
+npm-debug.log*            # npm debug logs
+yarn-debug.log*           # Yarn debug logs
+yarn-error.log*           # Yarn error logs
+.npm/                     # npm cache
+.yarn/                    # Yarn cache
+
+# Custom Project Files
+# --------------------
+# Add project-specific ignores below this line
\ No newline at end of file
diff --git a/templates/ocaml-shell/.ocamlformat b/templates/ocaml-shell/.ocamlformat
new file mode 100644
index 00000000..c34e70d3
--- /dev/null
+++ b/templates/ocaml-shell/.ocamlformat
@@ -0,0 +1,8 @@
+version = 0.27.0
+profile = default
+margin = 100
+indent = 2
+break-cases = fit-or-vertical
+break-infix = fit-or-vertical
+break-fun-decl = fit-or-vertical
+break-fun-sig = fit-or-vertical
\ No newline at end of file
diff --git a/templates/ocaml-shell/AGENTS.md b/templates/ocaml-shell/AGENTS.md
new file mode 100644
index 00000000..257578af
--- /dev/null
+++ b/templates/ocaml-shell/AGENTS.md
@@ -0,0 +1,465 @@
+# AGENTS.md - AI Agent Integration Guide
+
+This document provides comprehensive guidance for AI agents and coding assistants working with this OCaml project template. It defines workflows, best practices, and standardized approaches for consistent AI-assisted development.
+
+## Table of Contents
+- [Quick Reference](#quick-reference)
+- [Agent Capabilities & Roles](#agent-capabilities--roles)
+- [Workflow Patterns](#workflow-patterns)
+- [Code Generation Guidelines](#code-generation-guidelines)
+- [Integration Points](#integration-points)
+- [Quality Assurance](#quality-assurance)
+
+## Quick Reference
+
+### Essential Commands
+```bash
+# Environment
+nix develop                    # Enter dev shell
+build && test                  # Build and test
+fmt                           # Format code
+
+# Package Management  
+nix build                     # Create packages
+./result/bin/ocaml_template   # Test main CLI
+```
+
+### Project Structure
+```
+lib/ocaml_template.ml         # Core library (4 modules)
+bin/main.ml                   # CLI application
+examples/simple_example.ml    # Usage examples  
+test/test_ocaml_template.ml   # Test suite
+dune-project                  # Dependencies & metadata
+```
+
+### Code Patterns
+```ocaml
+(* Standard opens *)
+open Base
+open Stdio
+
+(* Error handling *)
+Result.t, Option.t, Or_error.t
+
+(* Async with Lwt *)
+let open Lwt.Syntax in
+let* data = fetch () in
+```
+
+## Agent Capabilities & Roles
+
+### Code Assistant Agent
+**Primary Responsibilities:**
+- Generate OCaml code following project conventions
+- Implement new features in existing modules
+- Create comprehensive unit tests
+- Maintain code style consistency
+
+**Key Skills Required:**
+- OCaml syntax and idioms
+- Jane Street Base/Core libraries
+- Dune build system
+- Functional programming patterns
+
+### Testing Agent  
+**Primary Responsibilities:**
+- Generate unit tests with Alcotest
+- Create property-based tests with QCheck
+- Design test scenarios for edge cases
+- Maintain test coverage
+
+**Testing Patterns:**
+```ocaml
+(* Unit test template *)
+let test_function_name () =
+  let actual = Module.function_name input in
+  let expected = expected_output in
+  Alcotest.(check test_type) "description" expected actual
+
+(* Property-based test template *)
+let property_test =
+  QCheck.Test.make ~count:100 ~name:"property description"
+    QCheck.Gen.generator
+    (fun input -> property_holds input)
+```
+
+### Documentation Agent
+**Primary Responsibilities:**
+- Generate OCaml documentation comments
+- Create usage examples
+- Update README sections
+- Maintain API documentation consistency
+
+**Documentation Standards:**
+```ocaml
+(** Brief description of the function.
+
+    Longer description with details about behavior,
+    parameters, and return values.
+    
+    @param param_name Description of parameter
+    @return Description of return value
+    @raises Exception Description of when it's raised
+    
+    Example:
+    {[
+      let result = my_function 42 "hello" in
+      Printf.printf "Result: %s\n" result
+    ]}
+*)
+```
+
+### Build & Integration Agent
+**Primary Responsibilities:**
+- Manage Dune configuration
+- Update Nix flake dependencies
+- Handle cross-platform compatibility
+- Optimize build performance
+
+**Build Patterns:**
+```lisp
+; Library dune file
+(library
+ (public_name project_name.module_name)
+ (name module_name)
+ (libraries base stdio dependency_name)
+ (preprocess (pps ppx_jane)))
+
+; Executable dune file  
+(executable
+ (public_name executable_name)
+ (name main)
+ (libraries project_name base stdio)
+ (preprocess (pps ppx_jane)))
+```
+
+## Workflow Patterns
+
+### Feature Development Workflow
+
+1. **Analysis Phase**
+   - Review existing code structure
+   - Identify integration points
+   - Plan module dependencies
+   - Design error handling strategy
+
+2. **Implementation Phase**
+   ```ocaml
+   (* Add to existing module or create new section *)
+   module New_feature = struct
+     type t = { ... }
+     
+     let create params =
+       (* Validate inputs *)
+       match validate params with
+       | Ok validated -> Ok { ... }
+       | Error msg -> Error msg
+       
+     let process feature_instance =
+       (* Implementation with proper error handling *)
+   end
+   ```
+
+3. **Testing Phase**
+   - Add unit tests for all public functions
+   - Include property-based tests for mathematical operations
+   - Test error conditions and edge cases
+   - Verify integration with existing modules
+
+4. **Integration Phase**
+   - Update CLI if feature is user-facing
+   - Add examples to demonstrate usage
+   - Update documentation
+   - Verify Nix build still works
+
+### Bug Fix Workflow
+
+1. **Reproduction**
+   - Create minimal test case reproducing the issue
+   - Identify the root cause in the code
+   - Understand impact on dependent modules
+
+2. **Fix Implementation**
+   - Implement minimal fix maintaining existing behavior
+   - Ensure fix doesn't break existing functionality
+   - Add regression tests
+
+3. **Validation**
+   - Run full test suite
+   - Test edge cases around the fix
+   - Verify no performance regressions
+
+### Refactoring Workflow
+
+1. **Safety First**
+   - Ensure comprehensive test coverage before refactoring
+   - Identify all usage points of code being refactored
+   - Plan backward compatibility strategy
+
+2. **Incremental Changes**
+   - Make small, focused changes
+   - Test after each change
+   - Maintain external API stability
+
+3. **Documentation Updates**
+   - Update internal documentation
+   - Revise examples if necessary
+   - Update comments and type annotations
+
+## Code Generation Guidelines
+
+### Module Structure
+```ocaml
+(* Module header with documentation *)
+(** Brief module description.
+    
+    Detailed description of module purpose and usage patterns.
+*)
+
+(* Type definitions *)
+type config = {
+  field1 : string;
+  field2 : int option;
+} [@@deriving show, sexp_of]
+
+(* Exception definitions *)
+exception Invalid_config of string
+
+(* Private helper functions *)
+let _validate_field field =
+  (* Implementation *)
+
+(* Public interface functions *)
+let create_config ~field1 ?field2 () =
+  match _validate_field field1 with
+  | true -> Ok { field1; field2 }
+  | false -> Error (Invalid_config "field1 validation failed")
+```
+
+### Error Handling Patterns
+```ocaml
+(* Use Result.t for operations that can fail *)
+let safe_operation input =
+  try
+    let result = potentially_failing_operation input in
+    Ok result
+  with
+  | Specific_exception msg -> Error ("Specific error: " ^ msg)
+  | exn -> Error ("Unexpected error: " ^ (Exn.to_string exn))
+
+(* Chain operations with Result.bind or let* *)
+let complex_operation input =
+  let open Result.Let_syntax in
+  let%bind validated = validate_input input in
+  let%bind processed = process_data validated in
+  let%bind saved = save_result processed in
+  return saved
+```
+
+### Async Programming Patterns
+```ocaml
+(* Standard Lwt pattern *)
+let async_fetch_and_process url =
+  let open Lwt.Syntax in
+  Lwt.catch
+    (fun () ->
+      let* response = Http.get url in
+      let* data = Http.body response in
+      let* result = process_async data in
+      Lwt.return (Ok result))
+    (fun exn ->
+      let error_msg = Exn.to_string exn in
+      Logs.err (fun m -> m "Async operation failed: %s" error_msg);
+      Lwt.return (Error error_msg))
+```
+
+## Integration Points
+
+### CLI Integration
+When adding features that should be exposed via CLI:
+
+```ocaml
+(* Add to bin/main.ml *)
+let new_command_handler arg1 arg2 =
+  (* Setup logging *)
+  Logger.setup_logging (Some Logs.Info);
+  
+  (* Call library functions *)
+  match Library.new_feature arg1 arg2 with
+  | Ok result -> 
+    Printf.printf "Success: %s\n" (Library.result_to_string result)
+  | Error msg ->
+    Printf.eprintf "Error: %s\n" msg;
+    exit 1
+
+(* If using Cmdliner, add command definition *)
+let new_command =
+  let open Cmdliner in
+  let arg1 = Arg.(required & pos 0 (some string) None & info []) in
+  let arg2 = Arg.(value & opt string "default" & info ["arg2"]) in
+  Term.(const new_command_handler $ arg1 $ arg2),
+  Term.info "new-command" ~doc:"Description of new command"
+```
+
+### Library API Design
+```ocaml
+(* Design composable APIs *)
+module My_feature = struct
+  type t
+  type config = { ... }
+  type error = 
+    | Invalid_input of string
+    | Processing_failed of string
+    | Network_error of string
+  
+  val create : config -> (t, error) result
+  val process : t -> input -> (output, error) result  
+  val to_json : t -> Yojson.Basic.t
+  val from_json : Yojson.Basic.t -> (t, error) result
+end
+```
+
+### Testing Integration
+```ocaml
+(* Add to test/test_ocaml_template.ml *)
+module My_feature_tests = struct
+  let test_create_valid () =
+    let config = My_feature.{ ... } in
+    match My_feature.create config with
+    | Ok instance -> Alcotest.pass
+    | Error _ -> Alcotest.fail "Expected successful creation"
+  
+  let test_create_invalid () =
+    let invalid_config = My_feature.{ ... } in
+    match My_feature.create invalid_config with
+    | Ok _ -> Alcotest.fail "Expected creation to fail"
+    | Error (Invalid_input _) -> Alcotest.pass
+    | Error _ -> Alcotest.fail "Expected Invalid_input error"
+    
+  let property_test_commutative =
+    QCheck.Test.make ~count:100 ~name:"operation is commutative"
+      QCheck.(pair int int)
+      (fun (a, b) -> My_feature.combine a b = My_feature.combine b a)
+end
+
+(* Add to main test suite *)
+let my_feature_tests = [
+  "create_valid", `Quick My_feature_tests.test_create_valid;
+  "create_invalid", `Quick My_feature_tests.test_create_invalid;
+]
+```
+
+## Quality Assurance
+
+### Code Review Checklist
+Before submitting generated code, verify:
+
+- [ ] **Compilation**: Code compiles without warnings
+- [ ] **Tests**: All tests pass, new functionality has tests
+- [ ] **Formatting**: Code follows .ocamlformat standards
+- [ ] **Documentation**: Public functions are documented
+- [ ] **Error Handling**: Errors are handled appropriately
+- [ ] **Performance**: No obvious performance regressions
+- [ ] **Compatibility**: Works with existing module interfaces
+- [ ] **Examples**: Usage examples are updated if relevant
+
+### Common Anti-Patterns to Avoid
+
+1. **Overuse of Exceptions**
+   ```ocaml
+   (* BAD *)
+   let parse_int str =
+     int_of_string str  (* Can raise exception *)
+   
+   (* GOOD *)
+   let parse_int str =
+     try Ok (int_of_string str)
+     with Failure _ -> Error "Invalid integer"
+   ```
+
+2. **Ignoring Error Cases**
+   ```ocaml
+   (* BAD *)
+   let process_file filename =
+     let content = In_channel.read_all filename in
+     parse_content content
+   
+   (* GOOD *)  
+   let process_file filename =
+     try
+       let content = In_channel.read_all filename in
+       Ok (parse_content content)
+     with
+     | Sys_error msg -> Error ("File error: " ^ msg)
+   ```
+
+3. **Inefficient List Operations**
+   ```ocaml
+   (* BAD - O(n²) complexity *)
+   let reverse_append lst1 lst2 =
+     (List.rev lst1) @ lst2
+   
+   (* GOOD - O(n) complexity *)
+   let reverse_append lst1 lst2 =
+     List.fold_left lst1 ~init:lst2 ~f:(fun acc x -> x :: acc)
+   ```
+
+### Performance Considerations
+
+1. **Tail Recursion**
+   ```ocaml
+   (* Use tail recursion for large datasets *)
+   let rec factorial_tail n acc =
+     if n <= 1 then acc
+     else factorial_tail (n - 1) (n * acc)
+   
+   let factorial n = factorial_tail n 1
+   ```
+
+2. **Appropriate Data Structures**
+   ```ocaml
+   (* Use Array for random access *)
+   let lookup_table = Array.create ~len:1000 default_value
+   
+   (* Use List for sequential access *)
+   let sequential_data = [item1; item2; item3]
+   
+   (* Use Map for key-value lookups *)
+   let user_database = Map.create (module String)
+   ```
+
+3. **Lazy Evaluation**
+   ```ocaml
+   (* Use Sequence for large datasets *)
+   let large_computation input =
+     input
+     |> Sequence.of_list
+     |> Sequence.map ~f:expensive_operation
+     |> Sequence.filter ~f:predicate
+     |> Sequence.take 10
+     |> Sequence.to_list
+   ```
+
+### Security Guidelines
+
+1. **Input Validation**
+   ```ocaml
+   let sanitize_filename filename =
+     let forbidden_chars = ['/', '\\', ':', '*', '?', '"', '<', '>', '|'] in
+     if List.exists forbidden_chars ~f:(String.contains filename)
+     then Error "Filename contains forbidden characters"
+     else Ok filename
+   ```
+
+2. **Safe String Operations**
+   ```ocaml
+   let safe_substring str ~pos ~len =
+     if pos >= 0 && len >= 0 && pos + len <= String.length str
+     then Ok (String.sub str ~pos ~len)
+     else Error "Invalid substring parameters"
+   ```
+
+---
+
+This guide should be consulted by AI agents before making significant changes to the codebase. When patterns evolve, update this document to maintain consistency across all AI-assisted development.
\ No newline at end of file
diff --git a/templates/ocaml-shell/CLAUDE.md b/templates/ocaml-shell/CLAUDE.md
new file mode 100644
index 00000000..fd14385d
--- /dev/null
+++ b/templates/ocaml-shell/CLAUDE.md
@@ -0,0 +1,303 @@
+# CLAUDE.md - Claude AI Development Assistant Guide
+
+This file provides specific guidance for Claude AI when working with this OCaml template project. It contains project context, coding standards, and development workflows to ensure consistent and high-quality assistance.
+
+## Project Overview
+
+This is a **modern OCaml project template** designed for professional development with:
+
+### Core Technologies
+- **OCaml 5.3.0** - Latest compiler with multicore support
+- **Dune 3.19** - Modern build system with workspace management
+- **Nix Flakes** - Reproducible development environment and packaging
+- **Jane Street ecosystem** - Base, Core, Stdio libraries for enhanced standard library
+
+### Key Libraries & Tools
+- **Lwt** - Cooperative threading and async programming
+- **Yojson** - JSON serialization and parsing
+- **Cmdliner** - Command-line argument parsing
+- **Logs** - Structured logging with multiple backends
+- **Alcotest** - Unit testing framework
+- **QCheck** - Property-based testing
+- **OCamlformat** - Automatic code formatting
+- **Merlin** - IDE integration for completion and navigation
+- **ODocs** - Documentation generation
+
+## Project Structure & Architecture
+
+```
+ocaml_template/
+├── dune-project              # Project metadata and dependencies
+├── lib/ocaml_template.ml     # Main library with 4 modules:
+│                             #   • Math: fibonacci, prime numbers
+│                             #   • Json_utils: JSON handling
+│                             #   • Async_utils: Lwt examples
+│                             #   • Logger: structured logging
+├── bin/main.ml               # CLI application demonstrating features
+├── examples/simple_example.ml # Usage examples and demos
+├── test/test_ocaml_template.ml # Unit and property-based tests
+└── .ocamlformat              # Code formatting configuration
+```
+
+## Development Workflow
+
+### Environment Setup
+```bash
+nix develop                    # Enter development shell
+build                         # Build project (alias for dune build)
+test                          # Run tests (alias for dune runtest)
+fmt                           # Format code (alias for dune build @fmt)
+```
+
+### Package Building
+```bash
+nix build                     # Create installable packages
+./result/bin/ocaml_template   # Run main CLI
+./result/bin/simple_example   # Run examples
+```
+
+## Coding Standards & Best Practices
+
+### OCaml Style Guidelines
+
+#### Code Formatting
+- **Indentation**: 2 spaces (configured in .ocamlformat)
+- **Line length**: 100 characters maximum
+- **Spacing**: Follow .ocamlformat configuration
+- **Pattern matching**: Align cases vertically
+
+#### Naming Conventions
+- **Modules**: `PascalCase` with underscores for file names (`Json_utils`)
+- **Functions**: `snake_case` (`is_prime`, `fetch_data`)
+- **Types**: lowercase (`person`, `config_t`)
+- **Constants**: `UPPER_CASE` (`DEFAULT_PORT`)
+- **Private functions**: prefix with `_` (`_internal_helper`)
+
+#### Library Usage Patterns
+```ocaml
+(* Always open Base first *)
+open Base
+open Stdio
+
+(* Use specific opens for other modules *)
+open Lwt.Syntax    (* for let* syntax *)
+```
+
+### Error Handling Philosophy
+1. **Use `Result.t` for operations that can fail**:
+   ```ocaml
+   let parse_config filename =
+     match In_channel.read_all filename with
+     | contents -> Ok (parse_contents contents)
+     | exception (Sys_error msg) -> Error ("Failed to read: " ^ msg)
+   ```
+
+2. **Use `Option.t` for nullable values**:
+   ```ocaml
+   let find_user_by_id users id =
+     List.find users ~f:(fun user -> user.id = id)
+   ```
+
+3. **Use `Or_error.t` for detailed error reporting**:
+   ```ocaml
+   let validate_email email =
+     if String.contains email '@'
+     then Ok email
+     else Or_error.error_string "Invalid email format"
+   ```
+
+### Async Programming with Lwt
+```ocaml
+let async_operation () =
+  let open Lwt.Syntax in
+  let* data = fetch_remote_data () in
+  let* processed = process_data data in
+  let* () = save_to_database processed in
+  Lwt.return (Ok processed)
+
+(* Always handle timeouts *)
+let with_timeout ~seconds operation =
+  Lwt.pick [
+    operation ();
+    (let* () = Lwt_unix.sleep seconds in
+     Lwt.fail_with "Operation timed out");
+  ]
+```
+
+### Testing Patterns
+```ocaml
+(* Unit tests with Alcotest *)
+let test_fibonacci () =
+  Alcotest.(check int) "fib(5)" 5 (Math.fibonacci 5);
+  Alcotest.(check int) "fib(0)" 0 (Math.fibonacci 0)
+
+(* Property-based tests with QCheck *)
+let test_fibonacci_property =
+  QCheck.Test.make ~count:100 ~name:"fibonacci monotonic"
+    QCheck.Gen.(1 -- 20)
+    (fun n -> Math.fibonacci n >= Math.fibonacci (n - 1))
+```
+
+## Claude-Specific Instructions
+
+### When Writing Code
+
+1. **Always follow the established patterns** in the existing codebase
+2. **Use the same library imports** as existing modules
+3. **Maintain consistent error handling** throughout the project
+4. **Include appropriate tests** for new functionality
+5. **Document public functions** with `(** ... *)` comments
+
+### Code Generation Guidelines
+
+1. **Type Safety First**:
+   - Define custom types for domain concepts
+   - Use pattern matching exhaustively
+   - Avoid `Obj.magic` or unsafe operations
+   - Prefer explicit type annotations for clarity
+
+2. **Performance Awareness**:
+   - Use tail recursion for list processing
+   - Choose appropriate data structures (Array vs List vs Sequence)
+   - Be mindful of allocation patterns
+   - Consider lazy evaluation with `Core.Sequence` when appropriate
+
+3. **Module Organization**:
+   - Group related functions into modules
+   - Use module signatures (`.mli` files) for public interfaces
+   - Follow the project's module hierarchy
+   - Keep modules focused and cohesive
+
+### Common Tasks & Solutions
+
+#### Adding New Functionality
+1. **Extend existing modules** rather than creating new ones when logical
+2. **Add tests** in `test/test_ocaml_template.ml`
+3. **Update examples** in `examples/simple_example.ml` if relevant
+4. **Consider CLI integration** in `bin/main.ml` if user-facing
+
+#### Working with JSON
+```ocaml
+(* Define types first *)
+type config = {
+  host : string;
+  port : int;
+  debug : bool;
+} [@@deriving show]
+
+(* Create conversion functions *)
+let config_to_json { host; port; debug } =
+  `Assoc [
+    ("host", `String host);
+    ("port", `Int port);
+    ("debug", `Bool debug);
+  ]
+
+let config_from_json = function
+  | `Assoc assoc ->
+    let open Result.Let_syntax in
+    let%bind host = extract_string assoc "host" in
+    let%bind port = extract_int assoc "port" in 
+    let%bind debug = extract_bool assoc "debug" in
+    Ok { host; port; debug }
+  | _ -> Error "Expected JSON object"
+```
+
+#### Async Operations
+```ocaml
+let fetch_and_process url =
+  let open Lwt.Syntax in
+  (* Use proper error handling *)
+  Lwt.catch
+    (fun () ->
+      let* response = Http_client.get url in
+      let* data = Http_client.read_body response in
+      let processed = process_data data in
+      Lwt.return (Ok processed))
+    (function
+      | Http_client.Connection_failed -> 
+        Lwt.return (Error "Connection failed")
+      | exn -> 
+        Lwt.return (Error (Exn.to_string exn)))
+```
+
+### Build System Integration
+
+#### Adding Dependencies
+1. **Update `dune-project`** with new dependencies:
+   ```lisp
+   (depends 
+     ocaml dune base stdio
+     new-package-name)
+   ```
+
+2. **Update Nix flake** if the dependency isn't in nixpkgs:
+   ```nix
+   propagatedBuildInputs = with pkgs.ocamlPackages; [
+     # existing dependencies
+     new-package-name
+   ];
+   ```
+
+3. **Update module `dune` files**:
+   ```lisp
+   (libraries base stdio new-package-name)
+   ```
+
+#### Creating New Executables
+```lisp
+(executable
+ (public_name my-new-tool)
+ (name my_new_tool)
+ (libraries ocaml_template base stdio)
+ (preprocess (pps ppx_jane)))
+```
+
+## Debugging & Troubleshooting
+
+### Common Issues
+1. **Missing dependencies**: Check `dune-project` and module `dune` files
+2. **Build failures**: Run `dune clean` then `dune build`
+3. **Test failures**: Run individual tests with `dune exec test/test_ocaml_template.exe`
+4. **Formatting issues**: Run `fmt` command or `dune build @fmt --auto-promote`
+
+### Development Tips
+1. **Use `dune utop`** for REPL with project loaded
+2. **Use `dune exec`** to run executables during development
+3. **Use `dune build @doc`** to generate and check documentation
+4. **Use `merlin`** for IDE integration (auto-configured)
+
+## Project Goals & Philosophy
+
+This template demonstrates:
+- **Modern OCaml practices** suitable for production use
+- **Comprehensive tooling integration** for professional development
+- **Cross-platform packaging** with Nix
+- **Testing best practices** with multiple frameworks
+- **Documentation-driven development** with examples and guides
+
+### Quality Standards
+- **Code coverage**: Aim for >80% test coverage
+- **Documentation**: All public functions documented
+- **Performance**: No obvious performance regressions
+- **Compatibility**: Support current stable OCaml (5.3.0+)
+- **Dependencies**: Minimize external dependencies, prefer well-maintained libraries
+
+### Maintenance Guidelines
+- **Keep dependencies updated** but test thoroughly
+- **Follow semantic versioning** for releases
+- **Maintain backward compatibility** when possible
+- **Document breaking changes** clearly
+- **Regular security audits** of dependencies
+
+## Reference Resources
+
+- [OCaml Manual](https://ocaml.org/manual/)
+- [Dune Documentation](https://dune.readthedocs.io/)
+- [Base Library Documentation](https://github.com/janestreet/base)
+- [Lwt Manual](https://ocsigen.org/lwt/latest/manual/)
+- [Real World OCaml](https://dev.realworldocaml.org/)
+
+---
+
+This guide should be updated as the project evolves. When adding new patterns or practices, document them here for consistency.
\ No newline at end of file
diff --git a/templates/ocaml-shell/GEMINI.md b/templates/ocaml-shell/GEMINI.md
new file mode 100644
index 00000000..721f5a5c
--- /dev/null
+++ b/templates/ocaml-shell/GEMINI.md
@@ -0,0 +1,440 @@
+# GEMINI.md - Google Gemini AI Integration Guide
+
+This document provides specific guidance for Google Gemini AI when working with this OCaml project template. It includes project context, development patterns, and Gemini-specific optimization strategies for effective AI-assisted OCaml development.
+
+## Project Context for Gemini
+
+### System Overview
+This is a **production-ready OCaml project template** featuring:
+- **Modern OCaml 5.3.0** with multicore capabilities
+- **Jane Street ecosystem** (Base, Core, Stdio) for enhanced functionality
+- **Comprehensive tooling** including Dune, Nix, testing frameworks
+- **Cross-platform support** via Nix flakes for reproducible environments
+
+### Architecture Summary
+```
+Core Library (lib/ocaml_template.ml):
+├── Math module      → Fibonacci, prime numbers, mathematical utilities
+├── Json_utils       → Yojson serialization with type safety
+├── Async_utils      → Lwt cooperative threading patterns  
+└── Logger           → Structured logging with configurable levels
+
+Applications:
+├── CLI (bin/main.ml)           → Command-line interface demo
+└── Examples (examples/)        → Usage demonstration and tutorials
+
+Quality Assurance:
+├── Tests (test/)               → Alcotest unit + QCheck property tests
+├── Documentation (ODocs)       → Auto-generated API documentation
+└── Formatting (.ocamlformat)   → Consistent code style
+```
+
+## Gemini-Specific Development Guidelines
+
+### Prompt Engineering for OCaml
+When interacting with Gemini for OCaml development, structure requests as:
+
+1. **Context Setting**:
+   ```
+   "Working with OCaml 5.3.0 project using Jane Street Base/Core libraries.
+   Current focus: [specific module/feature]
+   Requirements: [specific needs]"
+   ```
+
+2. **Code Generation Pattern**:
+   ```
+   "Generate OCaml code that:
+   - Uses Base standard library
+   - Follows functional programming principles
+   - Includes comprehensive error handling with Result.t
+   - Has appropriate type annotations
+   - Includes unit tests with Alcotest"
+   ```
+
+3. **Review and Analysis Pattern**:
+   ```
+   "Review this OCaml code for:
+   - Functional programming best practices
+   - Performance implications
+   - Error handling completeness
+   - Type safety
+   - OCaml idioms and conventions"
+   ```
+
+### Gemini Optimization Strategies
+
+#### Multimodal Code Understanding
+Gemini's multimodal capabilities can be leveraged for:
+
+1. **Visual Code Analysis**:
+   - Analyze code structure diagrams
+   - Review architectural flowcharts
+   - Process error message screenshots
+   - Understand build output visualizations
+
+2. **Documentation Integration**:
+   - Parse complex API documentation
+   - Analyze library usage examples
+   - Review coding standard documents
+   - Process OCaml language specification excerpts
+
+#### Large Context Utilization
+With Gemini's large context window:
+
+1. **Whole-Project Analysis**:
+   ```
+   Include entire project structure when asking:
+   "Analyze the complete codebase for [specific concern]
+   considering all modules and their interactions"
+   ```
+
+2. **Multi-File Refactoring**:
+   ```
+   "Refactor the following files simultaneously to maintain
+   consistency across the entire module system"
+   ```
+
+3. **Comprehensive Testing**:
+   ```
+   "Generate complete test suite covering all modules
+   with both unit tests and integration scenarios"
+   ```
+
+## Language Model Specific Patterns
+
+### OCaml Code Generation Templates for Gemini
+
+#### Module Creation Template
+```ocaml
+(* Request template for new modules *)
+"Create a new OCaml module for [functionality] that:
+
+Module Structure:
+- Uses Jane Street Base library
+- Defines appropriate types with [@@deriving show, sexp]
+- Implements error handling with Result.t
+- Includes comprehensive documentation
+- Follows project naming conventions
+
+Example integration with existing codebase:
+[provide relevant code context]
+
+Required functions:
+- create : config -> (t, error) result
+- process : t -> input -> (output, error) result  
+- to_string : t -> string
+
+Include both .ml implementation and .mli interface."
+```
+
+#### Error Handling Template
+```ocaml
+(* Request template for robust error handling *)
+"Implement error handling for [specific operation] using:
+
+Error Strategy:
+- Custom error types with meaningful variants
+- Result.t for operations that can fail
+- Or_error.t for detailed error reporting
+- Proper error propagation through call chain
+
+Error Types:
+type error = 
+  | Invalid_input of string
+  | Processing_failed of string
+  | External_service_error of string
+
+Integration with existing error handling patterns in the codebase."
+```
+
+#### Async Programming Template
+```ocaml
+(* Request template for Lwt async code *)
+"Create async OCaml code using Lwt for [operation] that:
+
+Async Requirements:
+- Uses Lwt.Syntax for let* binding
+- Implements proper timeout handling
+- Includes error recovery mechanisms
+- Follows cooperative threading best practices
+
+Pattern:
+let async_operation params =
+  let open Lwt.Syntax in
+  Lwt.catch
+    (fun () -> 
+      let* step1 = async_step1 params in
+      let* step2 = async_step2 step1 in
+      Lwt.return (Ok step2))
+    (fun exn -> 
+      Lwt.return (Error (error_from_exception exn)))
+
+Include timeout wrapper and proper resource cleanup."
+```
+
+### Testing Strategy with Gemini
+
+#### Comprehensive Test Generation
+```
+"Generate comprehensive test suite for [module] including:
+
+Unit Tests (Alcotest):
+- Happy path scenarios
+- Edge cases and boundary conditions  
+- Error conditions and failure modes
+- Input validation testing
+
+Property-Based Tests (QCheck):
+- Mathematical properties (if applicable)
+- Invariant checking
+- Roundtrip properties (serialization/deserialization)
+- Compositional properties
+
+Integration Tests:
+- Module interaction testing
+- CLI integration (if applicable)
+- End-to-end workflow testing
+
+Test Structure:
+- Descriptive test names
+- Clear assertions with meaningful failure messages
+- Proper setup/teardown if needed
+- Performance regression tests where relevant"
+```
+
+#### Test Data Generation
+```
+"Generate realistic test data for [domain] that covers:
+- Normal use cases
+- Edge cases (empty, maximum, minimum values)
+- Invalid inputs for negative testing
+- Unicode/internationalization concerns
+- Performance stress scenarios
+
+Format as OCaml let bindings with appropriate types."
+```
+
+## Advanced Gemini Techniques
+
+### Code Review and Analysis
+
+#### Architectural Review
+```
+"Perform architectural analysis of the OCaml codebase focusing on:
+
+Design Patterns:
+- Module organization and dependencies
+- Abstraction levels and interfaces
+- Data flow and transformation patterns
+- Error propagation strategies
+
+Code Quality:
+- Functional programming principles adherence
+- Performance implications of data structures
+- Memory usage patterns
+- Concurrent programming safety
+
+Maintainability:
+- Code duplication identification
+- Refactoring opportunities
+- Documentation completeness
+- Testing coverage gaps
+
+Provide specific recommendations with code examples."
+```
+
+#### Performance Analysis
+```
+"Analyze OCaml code for performance optimization:
+
+Algorithmic Complexity:
+- Time complexity analysis
+- Space complexity evaluation
+- Tail recursion optimization opportunities
+- Data structure choice evaluation
+
+OCaml-Specific Optimizations:
+- Allocation pattern analysis
+- Boxing/unboxing considerations
+- Compilation optimization opportunities
+- Memory layout improvements
+
+Benchmarking Strategy:
+- Critical path identification
+- Measurement methodology
+- Performance regression prevention
+- Optimization validation approach"
+```
+
+### Advanced Code Generation
+
+#### DSL Integration
+```
+"Create OCaml code that integrates with [external system/API] using:
+
+Integration Requirements:
+- Type-safe API binding generation
+- Comprehensive error handling for external failures
+- Async operation support with proper timeout
+- Configuration management
+- Logging integration
+
+Generated Code Should Include:
+- Client module with connection management
+- Request/response type definitions
+- Error handling with meaningful error messages
+- Usage examples and documentation
+- Unit tests with mocking for external dependencies"
+```
+
+#### Metaprogramming with PPX
+```
+"Generate OCaml code using PPX extensions for [specific need]:
+
+PPX Usage:
+- [@@deriving show, sexp] for type serialization
+- ppx_jane extensions for additional functionality  
+- Custom PPX integration if needed
+
+Code Generation:
+- Compile-time validation
+- Automatic instance generation
+- Code transformation patterns
+- Integration with existing PPX usage in project"
+```
+
+## Quality Assurance for Gemini
+
+### Code Validation Checklist
+
+Before accepting Gemini-generated code, verify:
+
+#### Functional Requirements
+- [ ] **Correctness**: Logic implements specified behavior
+- [ ] **Completeness**: All edge cases are handled
+- [ ] **Integration**: Properly integrates with existing modules
+- [ ] **API Consistency**: Follows established patterns
+
+#### OCaml Best Practices
+- [ ] **Type Safety**: Leverages OCaml's type system effectively
+- [ ] **Error Handling**: Uses Result.t/Option.t appropriately
+- [ ] **Performance**: Uses efficient algorithms and data structures
+- [ ] **Memory Safety**: Avoids common pitfalls
+
+#### Project Standards
+- [ ] **Style Compliance**: Follows .ocamlformat configuration
+- [ ] **Documentation**: Public functions have appropriate comments
+- [ ] **Testing**: Includes comprehensive tests
+- [ ] **Dependencies**: Uses only approved project dependencies
+
+### Common Gemini Pitfalls in OCaml
+
+#### Pattern Matching
+```ocaml
+(* Gemini might generate non-exhaustive patterns *)
+(* PROBLEMATIC *)
+let process_option = function
+  | Some x -> handle_value x
+  (* Missing None case *)
+
+(* CORRECTED *)
+let process_option = function
+  | Some x -> handle_value x
+  | None -> handle_none ()
+```
+
+#### Error Propagation
+```ocaml
+(* Gemini might not properly chain errors *)
+(* PROBLEMATIC *)
+let complex_operation input =
+  let result1 = step1 input in
+  let result2 = step2 result1 in
+  step3 result2
+
+(* CORRECTED *)
+let complex_operation input =
+  let open Result.Let_syntax in
+  let%bind result1 = step1 input in
+  let%bind result2 = step2 result1 in
+  step3 result2
+```
+
+#### Resource Management
+```ocaml
+(* Gemini might not handle resource cleanup *)
+(* PROBLEMATIC *)
+let process_file filename =
+  let ic = In_channel.open_text filename in
+  let content = In_channel.input_all ic in
+  parse_content content
+
+(* CORRECTED *)
+let process_file filename =
+  In_channel.with_file filename ~f:(fun ic ->
+    let content = In_channel.input_all ic in
+    parse_content content)
+```
+
+## Integration with Other AI Tools
+
+### Multi-Agent Workflows
+
+When using Gemini alongside other AI tools:
+
+1. **Gemini for Architecture**: Use Gemini's large context for high-level design
+2. **Claude for Implementation**: Leverage Claude's coding precision for detailed implementation
+3. **Cursor for IDE Integration**: Use Cursor for real-time coding assistance
+4. **Specialized Tools**: Use domain-specific AI tools for specialized tasks
+
+### Handoff Patterns
+
+#### Gemini → Claude Handoff
+```
+"Gemini Analysis Complete:
+
+Architecture decisions:
+[Gemini's architectural recommendations]
+
+Module interfaces:
+[Detailed interface specifications]
+
+Claude Implementation Request:
+Please implement the following modules according to the specifications,
+ensuring adherence to the project's OCaml conventions and error handling patterns."
+```
+
+#### Claude → Gemini Handoff  
+```
+"Claude Implementation Complete:
+
+Implemented modules:
+[List of completed modules with functionality]
+
+Gemini Review Request:
+Please review the implementation for:
+- Architectural consistency with original design
+- Performance implications at scale
+- Integration opportunities with other systems
+- Documentation and testing completeness"
+```
+
+## Continuous Learning and Adaptation
+
+### Feedback Integration
+
+1. **Code Review Feedback**: Incorporate human review feedback into future requests
+2. **Performance Metrics**: Use actual performance data to improve optimization suggestions
+3. **Bug Reports**: Learn from production issues to improve error handling suggestions
+4. **User Patterns**: Adapt to team-specific coding patterns and preferences
+
+### Model Improvement Strategies
+
+1. **Context Refinement**: Continuously improve context provided to Gemini
+2. **Template Evolution**: Update templates based on successful patterns
+3. **Error Analysis**: Analyze common mistakes and prevent them proactively
+4. **Best Practice Updates**: Keep guidance current with OCaml ecosystem evolution
+
+---
+
+This guide should be referenced when using Google Gemini for OCaml development tasks. Update this document as new capabilities and patterns emerge.
\ No newline at end of file
diff --git a/templates/ocaml-shell/README.md b/templates/ocaml-shell/README.md
new file mode 100644
index 00000000..7781f066
--- /dev/null
+++ b/templates/ocaml-shell/README.md
@@ -0,0 +1,314 @@
+# OCaml Development Shell
+
+A comprehensive Nix flake for OCaml development with modern tooling and best practices.
+
+## Features
+
+🐪 **OCaml 5.3.0** - Latest OCaml compiler with multicore support
+🔨 **Dune 3.19** - Modern build system for OCaml
+🎨 **OCamlformat** - Consistent code formatting
+🧠 **Language Server** - OCaml LSP for IDE integration
+📚 **Rich Library Ecosystem** - Pre-configured with popular libraries
+🧪 **Testing Frameworks** - Alcotest and QCheck included
+📖 **Documentation** - ODocs for generating documentation
+
+## Quick Start
+
+### Using Nix Flakes
+
+```bash
+# Enter the development shell
+nix develop
+
+# Build the project  
+build
+
+# Run the main CLI application
+dune exec ocaml_template
+
+# Run the examples
+run-example
+
+# Build installable packages
+nix build
+
+# Run the built binary
+./result/bin/ocaml_template
+```
+
+### Using Traditional Nix
+
+```bash
+# Enter the development shell
+nix-shell
+
+# Or use direnv for automatic shell activation
+echo "use flake" > .envrc
+direnv allow
+```
+
+## Available Commands
+
+Once in the development shell, you have access to these convenient commands:
+
+| Command | Description |
+|---------|-------------|
+| `build` | Build your project (`dune build`) |
+| `test` | Run tests (`dune runtest`) |
+| `repl` | Start REPL with project loaded (`dune utop`) |
+| `fmt` | Format code with ocamlformat |
+| `docs` | Generate documentation with odoc |
+| `clean` | Clean build artifacts |
+| `run-example` | Run the simple example program |
+| `dx` | Edit flake.nix |
+| `ox` | Edit dune-project |
+
+## Included Tools
+
+### Core Development
+- **OCaml 5.3.0** - The OCaml compiler and runtime
+- **Dune** - Build system and project manager
+- **opam** - Package manager (for external dependencies)
+- **findlib** - Library manager
+
+### Editor Integration
+- **OCaml LSP Server** - Language server protocol support
+- **Merlin** - Context-sensitive completion and navigation
+- **OCamlformat** - Code formatter with consistent style
+- **OCP Indent** - Intelligent indentation
+
+### Libraries Included
+- **Base & Stdio** - Jane Street's enhanced standard library
+- **Core** - Industrial-strength alternative standard library
+- **Lwt** - Cooperative threading library
+- **Cmdliner** - Command-line argument parsing
+- **Yojson** - JSON processing library
+- **Logs** - Logging framework
+
+### Testing & Documentation
+- **Alcotest** - Lightweight testing framework
+- **QCheck** - Property-based testing
+- **OUnit2** - Unit testing framework
+- **ODocs** - Documentation generation
+
+### PPX Extensions
+- **ppx_deriving** - Code generation from type definitions
+- **ppx_jane** - Jane Street's PPX collection
+- **ppx_inline_test** - Inline test definitions
+- **ppx_expect** - Expectation-based testing
+
+## Project Structure
+
+The template includes a complete project structure:
+
+```
+ocaml_template/
+├── dune-project              # Project configuration & dependencies
+├── .ocamlformat             # Code formatting configuration
+├── lib/                     # Library code
+│   ├── dune                # Library build configuration
+│   └── ocaml_template.ml   # Main library with modules:
+│                           #   - Math (fibonacci, primes)
+│                           #   - Json_utils (JSON handling)
+│                           #   - Async_utils (Lwt examples)
+│                           #   - Logger (structured logging)
+├── bin/                    # Executable applications
+│   ├── dune               # Binary build configuration
+│   └── main.ml           # Main CLI application
+├── examples/              # Usage examples
+│   ├── dune              # Example build configuration
+│   └── simple_example.ml # Demonstrates library features
+└── test/                 # Test suite (temporarily simplified)
+    ├── dune             # Test build configuration
+    └── test_ocaml_template.ml # Unit & property-based tests
+```
+
+## Configuration Files
+
+### Development Configuration
+- **`.ocamlformat`** - Automatic code formatting configuration
+- **`.envrc`** - Direnv integration for automatic shell activation  
+- **`.gitignore`** - Comprehensive ignore patterns for OCaml development
+
+### AI Development Assistant Integration
+- **`.cursorrules`** - Cursor IDE rules for OCaml development
+- **`CLAUDE.md`** - Claude AI development assistance guide
+- **`AGENTS.md`** - Multi-agent AI workflow patterns  
+- **`GEMINI.md`** - Google Gemini AI integration guide
+
+### Code Formatting (`.ocamlformat`)
+```
+version = 0.27.0
+profile = default
+margin = 100
+indent = 2
+break-cases = fit-or-vertical
+```
+
+### AI Assistant Configuration
+The project includes comprehensive AI assistant integration:
+- **Cursor IDE**: Optimized rules for OCaml development with modern tooling
+- **Claude AI**: Detailed project context and coding standards
+- **Multi-Agent**: Workflows for coordinated AI assistance
+- **Google Gemini**: Large context utilization strategies
+
+These configurations ensure consistent, high-quality AI-assisted development.
+
+## Development Workflow
+
+1. **Start Development**:
+   ```bash
+   nix develop
+   init-project  # if starting from scratch
+   ```
+
+2. **Write Code**:
+   - Edit files in `lib/`, `bin/`, `test/`
+   - Use your favorite editor with OCaml LSP support
+
+3. **Build and Test**:
+   ```bash
+   build        # Compile your project
+   test         # Run tests
+   fmt          # Format code
+   ```
+
+4. **Interactive Development**:
+   ```bash
+   repl         # Start utop with your project loaded
+   ```
+
+5. **Documentation**:
+   ```bash
+   docs         # Generate HTML documentation
+   ```
+
+## IDE Integration
+
+### VS Code
+Install the "OCaml Platform" extension for:
+- Syntax highlighting
+- IntelliSense completion
+- Error diagnostics
+- Formatting on save
+
+### Vim/Neovim
+Configure your LSP client to use `ocamllsp`.
+
+### Emacs
+Use `tuareg-mode` with `merlin` for OCaml development.
+
+## Adding Dependencies
+
+### Using Dune
+Add dependencies to your `dune-project`:
+
+```lisp
+(package
+ (name my_project)
+ (depends 
+   ocaml 
+   dune 
+   base 
+   stdio
+   lwt          ; Add new dependencies here
+   cohttp-lwt-unix))
+```
+
+### Using opam (for external packages)
+```bash
+opam install lwt cohttp-lwt-unix
+```
+
+## Building Packages
+
+The template includes ready-to-use Nix package definitions:
+
+### Main Package (default)
+```bash
+nix build                    # Builds complete project with CLI and examples
+./result/bin/ocaml_template  # Run the main CLI
+./result/bin/simple_example  # Run the examples
+```
+
+### Library Only  
+```bash
+nix build .#lib             # Builds only the library component
+```
+
+### Examples Package
+```bash  
+nix build .#examples        # Builds library + examples
+```
+
+The packages are defined in `flake.nix` with:
+- Full dependency management
+- Proper OCaml ecosystem integration
+- Cross-platform support (Linux, macOS)
+- Metadata and documentation
+
+## Examples
+
+### Running the Examples
+
+```bash
+# In development shell
+run-example
+
+# Or with nix build
+nix build && ./result/bin/simple_example
+```
+
+Output:
+```
+=== OCaml Template Examples ===
+
+1. Basic Greetings:
+   Hello, Alice!
+   Bonjour, Bob!
+
+2. Math Functions:
+   Fibonacci sequence (first 10): 0, 1, 1, 2, 3, 5, 8, 13, 21, 34
+   Prime numbers up to 50: 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47
+
+3. JSON Handling:
+   { "name": "Alice", "age": 25, "email": "alice@example.com" }
+   { "name": "Bob", "age": 30, "email": null }
+
+4. Logging Example:
+   [INFO] This is an info message
+   [WARNING] This is a warning
+```
+
+### Main CLI Application
+
+```bash
+# Build and run
+build && dune exec ocaml_template
+
+# Or use nix build
+nix build && ./result/bin/ocaml_template
+```
+
+The CLI demonstrates:
+- Mathematical computations (Fibonacci, prime numbers)
+- JSON serialization/deserialization
+- Structured logging
+- Modern OCaml patterns
+
+## Troubleshooting
+
+### Common Issues
+
+1. **Opam not initialized**: The shell will attempt to initialize opam automatically
+2. **Missing dependencies**: Add them to your `dune-project` file
+3. **Format conflicts**: Run `fmt` to apply consistent formatting
+
+### Getting Help
+
+- OCaml Manual: https://ocaml.org/manual/
+- Dune Documentation: https://dune.readthedocs.io/
+- Jane Street Libraries: https://github.com/janestreet
+- OCaml Discourse: https://discuss.ocaml.org/
+
+Happy OCaml coding! 🐪
\ No newline at end of file
diff --git a/templates/ocaml-shell/bin/dune b/templates/ocaml-shell/bin/dune
new file mode 100644
index 00000000..8aec2258
--- /dev/null
+++ b/templates/ocaml-shell/bin/dune
@@ -0,0 +1,5 @@
+(executable
+ (public_name ocaml_template)
+ (name main)
+ (libraries ocaml_template base stdio yojson logs fmt.tty)
+ (preprocess (pps ppx_jane)))
\ No newline at end of file
diff --git a/templates/ocaml-shell/bin/main.ml b/templates/ocaml-shell/bin/main.ml
new file mode 100644
index 00000000..6e4989c1
--- /dev/null
+++ b/templates/ocaml-shell/bin/main.ml
@@ -0,0 +1,28 @@
+open Base
+open Stdio
+open Ocaml_template
+
+(** Simple main without complex Cmdliner usage for now *)
+
+let () =
+  printf "=== OCaml Template CLI ===\n";
+  
+  (* Setup logging *)
+  Logger.setup_logging (Some Logs.Info);
+  Logger.info "Starting OCaml Template";
+  
+  (* Basic greeting *)
+  printf "Basic greeting: %s\n" (greet "OCaml");
+  
+  (* Math examples *)
+  printf "Fibonacci(8) = %d\n" (Math.fibonacci 8);
+  printf "Is 13 prime? %b\n" (Math.is_prime 13);
+  printf "Primes up to 30: %s\n" 
+    (Math.primes_up_to 30 |> List.map ~f:Int.to_string |> String.concat ~sep:", ");
+  
+  (* JSON example *)
+  let person = Json_utils.{ name = "Example User"; age = 25; email = Some "user@example.com" } in
+  let json = Json_utils.person_to_json person in
+  printf "Person as JSON: %s\n" (Yojson.Basic.pretty_to_string json);
+  
+  printf "=== CLI Complete ===\n"
\ No newline at end of file
diff --git a/templates/ocaml-shell/dune-project b/templates/ocaml-shell/dune-project
new file mode 100644
index 00000000..a318fd5d
--- /dev/null
+++ b/templates/ocaml-shell/dune-project
@@ -0,0 +1,28 @@
+(lang dune 3.0)
+
+(name ocaml_template)
+
+(package
+ (name ocaml_template)
+ (synopsis "OCaml template project with modern tooling")
+ (description "A complete OCaml project template featuring modern libraries, testing, and documentation")
+ (authors "Your Name <your.email@example.com>")
+ (maintainers "Your Name <your.email@example.com>")
+ (license MIT)
+ (homepage "https://github.com/user/ocaml-template")
+ (bug_reports "https://github.com/user/ocaml-template/issues")
+ (depends 
+  ocaml 
+  dune
+  (base (>= 0.16.0))
+  (stdio (>= 0.16.0))
+  (core (>= 0.16.0))
+  (lwt (>= 5.6.0))
+  (cmdliner (>= 1.2.0))
+  (yojson (>= 2.0.0))
+  (logs (>= 0.7.0))
+  (fmt (>= 0.9.0))
+  (alcotest :with-test)
+  (alcotest-lwt :with-test)
+  (qcheck :with-test)
+  (odoc :with-doc)))
\ No newline at end of file
diff --git a/templates/ocaml-shell/examples/dune b/templates/ocaml-shell/examples/dune
new file mode 100644
index 00000000..00a98749
--- /dev/null
+++ b/templates/ocaml-shell/examples/dune
@@ -0,0 +1,5 @@
+(executable
+ (public_name simple_example)
+ (name simple_example)
+ (libraries ocaml_template base stdio yojson logs fmt.tty)
+ (preprocess (pps ppx_jane)))
\ No newline at end of file
diff --git a/templates/ocaml-shell/examples/simple_example.ml b/templates/ocaml-shell/examples/simple_example.ml
new file mode 100644
index 00000000..ba741664
--- /dev/null
+++ b/templates/ocaml-shell/examples/simple_example.ml
@@ -0,0 +1,54 @@
+open Base
+open Stdio
+open Ocaml_template
+
+(** Simple examples demonstrating the library functionality *)
+
+let () =
+  printf "=== OCaml Template Examples ===\n\n";
+  
+  (* Basic greeting *)
+  printf "1. Basic Greetings:\n";
+  printf "   %s\n" (greet "Alice");
+  printf "   %s\n" (greet ~greeting:"Bonjour" "Bob");
+  printf "\n";
+  
+  (* Math examples *)
+  printf "2. Math Functions:\n";
+  printf "   Fibonacci sequence (first 10): ";
+  List.range 0 10 
+  |> List.map ~f:Math.fibonacci 
+  |> List.map ~f:Int.to_string
+  |> String.concat ~sep:", "
+  |> printf "%s\n";
+  
+  printf "   Prime numbers up to 50: ";
+  Math.primes_up_to 50
+  |> List.map ~f:Int.to_string
+  |> String.concat ~sep:", "
+  |> printf "%s\n";
+  printf "\n";
+  
+  (* JSON handling *)
+  printf "3. JSON Handling:\n";
+  let people = [
+    Json_utils.{ name = "Alice"; age = 25; email = Some "alice@example.com" };
+    Json_utils.{ name = "Bob"; age = 30; email = None };
+    Json_utils.{ name = "Charlie"; age = 35; email = Some "charlie@test.org" };
+  ] in
+  
+  people |> List.iter ~f:(fun person ->
+    let json = Json_utils.person_to_json person in
+    printf "   %s\n" (Yojson.Basic.pretty_to_string json)
+  );
+  printf "\n";
+  
+  (* Logging *)
+  printf "4. Logging Example:\n";
+  Logger.setup_logging (Some Logs.Info);
+  Logger.info "This is an info message";
+  Logger.warn "This is a warning";
+  Logger.debug "This debug message won't show (log level is Info)";
+  printf "\n";
+  
+  printf "=== Examples Complete ===\n"
\ No newline at end of file
diff --git a/templates/ocaml-shell/flake.lock b/templates/ocaml-shell/flake.lock
new file mode 100644
index 00000000..e9ec7585
--- /dev/null
+++ b/templates/ocaml-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1752997324,
+        "narHash": "sha256-vtTM4oDke3SeDj+1ey6DjmzXdq8ZZSCLWSaApADDvIE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "7c688a0875df5a8c28a53fb55ae45e94eae0dddb",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753006367,
+        "narHash": "sha256-tzbhc4XttkyEhswByk5R38l+ztN9UDbnj0cTcP6Hp9A=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "421b56313c65a0815a52b424777f55acf0b56ddf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/ocaml-shell/flake.nix b/templates/ocaml-shell/flake.nix
new file mode 100644
index 00000000..baf35acb
--- /dev/null
+++ b/templates/ocaml-shell/flake.nix
@@ -0,0 +1,344 @@
+{
+  description = "A development shell for OCaml";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [];
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        ox = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/dune-project'';
+          description = "Edit dune-project";
+        };
+        run-example = {
+          exec = ''dune exec examples/simple_example.exe'';
+          description = "Run the simple example program";
+        };
+        build = {
+          exec = ''dune build'';
+          description = "Build the project";
+        };
+        test = {
+          exec = ''dune runtest'';
+          description = "Run tests";
+        };
+        clean = {
+          exec = ''dune clean'';
+          description = "Clean build artifacts";
+        };
+        fmt = {
+          exec = ''dune build @fmt --auto-promote'';
+          description = "Format code with ocamlformat";
+        };
+        docs = {
+          exec = ''dune build @doc && echo "Documentation built in _build/default/_doc/_html/"'';
+          description = "Build documentation";
+        };
+        repl = {
+          exec = ''dune utop'';
+          description = "Start REPL with project loaded";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+
+      treefmtModule = {
+        projectRootFile = "flake.nix";
+        programs = {
+          alejandra.enable = true; # Nix formatter
+          ocamlformat.enable = true; # OCaml formatter
+        };
+      };
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "ocaml-dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            # Nix tooling
+            alejandra
+            nixd
+            statix
+            deadnix
+
+            # OCaml core toolchain
+            ocaml
+            dune_3
+            opam
+            ocamlPackages.findlib
+
+            # Development tools
+            ocamlformat
+            ocamlPackages.merlin
+            ocamlPackages.utop
+            ocamlPackages.ocp-indent
+            ocamlPackages.ocaml-lsp
+            ocamlPackages.odoc # Documentation generation
+            ocamlPackages.ounit2 # Additional testing framework
+
+            # Essential libraries for most OCaml projects
+            ocamlPackages.base
+            ocamlPackages.stdio
+            ocamlPackages.core # Jane Street's standard library
+
+            # Popular PPX extensions
+            ocamlPackages.ppx_deriving
+            ocamlPackages.ppx_jane # Jane Street PPX collection
+            ocamlPackages.ppx_inline_test
+            ocamlPackages.ppx_expect
+
+            # Testing frameworks
+            ocamlPackages.alcotest
+            ocamlPackages.qcheck # Property-based testing
+
+            # Commonly used libraries
+            ocamlPackages.lwt # Async programming
+            ocamlPackages.cmdliner # Command-line parsing
+            ocamlPackages.yojson # JSON handling
+            ocamlPackages.logs # Logging
+
+            # Build and project management
+            git # For project management
+            gnumake # Sometimes needed for C bindings
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+                    # Create .ocamlformat if it doesn't exist
+                    if [ ! -f .ocamlformat ]; then
+                      cat > .ocamlformat << 'EOF'
+          version = 0.27.0
+          profile = default
+          margin = 100
+          indent = 2
+          break-cases = fit-or-vertical
+          EOF
+                    fi
+
+                    # Setup opam if not already done (optional)
+                    if [ ! -d "$HOME/.opam" ] && command -v opam >/dev/null 2>&1; then
+                      echo "Setting up opam for the first time..."
+                      opam init --no-setup --disable-sandboxing -y 2>/dev/null || true
+                    fi
+
+                    echo "🐪 Welcome to the OCaml Development Environment!"
+                    echo "═══════════════════════════════════════════════"
+                    echo "📦 OCaml version: $(ocaml -version | cut -d' ' -f4)"
+                    echo "🔨 Dune version: $(dune --version)"
+                    echo "📝 OCamlformat version: $(ocamlformat --version | cut -d' ' -f2)"
+                    echo ""
+                    echo "🛠️  Available Development Tools:"
+                    echo "   • ocaml        - OCaml compiler and REPL"
+                    echo "   • dune         - Modern build system"
+                    echo "   • utop         - Enhanced REPL with autocompletion"
+                    echo "   • ocaml-lsp    - Language server for IDE integration"
+                    echo "   • ocamlformat   - Code formatter"
+                    echo "   • merlin       - Editor integration for completion/navigation"
+                    echo "   • odoc         - Documentation generator"
+                    echo ""
+                    echo "📚 Useful Libraries Included:"
+                    echo "   • base, stdio  - Jane Street's enhanced standard library"
+                    echo "   • core         - Industrial-strength standard library"
+                    echo "   • lwt          - Cooperative threading"
+                    echo "   • cmdliner     - Command-line argument parsing"
+                    echo "   • yojson       - JSON processing"
+                    echo "   • alcotest     - Lightweight testing framework"
+                    echo "   • qcheck       - Property-based testing"
+                    echo ""
+                    echo "🚀 Quick Commands:"
+                    echo "   • build        - Build your project (dune build)"
+                    echo "   • test         - Run tests (dune runtest)"
+                    echo "   • repl         - Start REPL with project loaded"
+                    echo "   • fmt          - Format code"
+                    echo "   • docs         - Generate documentation"
+                    echo "   • clean        - Clean build artifacts"
+                    echo "   • run-example  - Run the simple example program"
+                    echo ""
+                    echo "💡 Try: 'nix build' to create installable packages!"
+                    echo "💡 Try: 'build && dune exec ocaml_template' to run the CLI!"
+                    echo "═══════════════════════════════════════════════"
+        '';
+      };
+
+      # Example package builds (uncomment and customize for your project)
+      # packages = {
+      #   default = pkgs.ocamlPackages.buildDunePackage {
+      #     pname = "ocaml_template";
+      #     version = "0.1.0";
+      #     src = ./.;
+      #
+      #     # Runtime dependencies
+      #     propagatedBuildInputs = with pkgs.ocamlPackages; [
+      #       base
+      #       stdio
+      #       core
+      #       lwt
+      #       cmdliner
+      #       yojson
+      #       logs
+      #       fmt
+      #       ppx_jane
+      #       qcheck
+      #     ];
+      #
+      #     # Build dependencies
+      #     buildInputs = with pkgs.ocamlPackages; [
+      #       dune_3
+      #       findlib
+      #     ];
+      #
+      #     # Test dependencies
+      #     checkInputs = with pkgs.ocamlPackages; [
+      #       alcotest
+      #       alcotest-lwt
+      #       qcheck
+      #       ounit2
+      #     ];
+      #
+      #     # Disable tests for now to focus on build
+      #     doCheck = false;
+      #
+      #     # Override build phase to avoid --only-packages issue
+      #     buildPhase = ''
+      #       runHook preBuild
+      #       dune build --profile release lib bin examples @install
+      #       runHook postBuild
+      #     '';
+      #
+      #     meta = with pkgs.lib; {
+      #       description = "OCaml template project with modern tooling and best practices";
+      #       longDescription = ''
+      #         A comprehensive OCaml project template featuring:
+      #         - Modern library ecosystem (Base, Core, Lwt)
+      #         - Command-line interface with Cmdliner
+      #         - JSON handling with Yojson
+      #         - Comprehensive testing with Alcotest and QCheck
+      #         - Async programming examples
+      #         - Structured logging
+      #         - Documentation with ODocs
+      #       '';
+      #       homepage = "https://github.com/user/ocaml-template";
+      #       changelog = "https://github.com/user/ocaml-template/blob/main/CHANGELOG.md";
+      #       license = licenses.mit;
+      #       maintainers = with maintainers; [
+      #         /*
+      #         Add your maintainer info
+      #         */
+      #       ];
+      #       platforms = platforms.unix;
+      #     };
+      #   };
+      #
+      #   # Additional build targets
+      #   lib = pkgs.ocamlPackages.buildDunePackage {
+      #     pname = "ocaml-template-lib";
+      #     version = "0.1.0";
+      #     src = ./.;
+      #
+      #     # Only build the library, not the executable
+      #     buildPhase = ''
+      #       runHook preBuild
+      #       dune build lib/
+      #       runHook postBuild
+      #     '';
+      #
+      #     installPhase = ''
+      #       runHook preInstall
+      #       dune install --prefix=$out --libdir=$OCAMLFIND_DESTDIR lib
+      #       runHook postInstall
+      #     '';
+      #
+      #     propagatedBuildInputs = with pkgs.ocamlPackages; [
+      #       base
+      #       stdio
+      #       core
+      #       lwt
+      #       yojson
+      #       logs
+      #       ppx_jane
+      #     ];
+      #
+      #     doCheck = false; # Skip tests for lib-only build
+      #
+      #     meta = with pkgs.lib; {
+      #       description = "OCaml template library only";
+      #       license = licenses.mit;
+      #     };
+      #   };
+      #
+      #   examples = pkgs.ocamlPackages.buildDunePackage {
+      #     pname = "ocaml-template-examples";
+      #     version = "0.1.0";
+      #     src = ./.;
+      #
+      #     # Build library and examples
+      #     buildPhase = ''
+      #       runHook preBuild
+      #       dune build lib/ examples/
+      #       runHook postBuild
+      #     '';
+      #
+      #     installPhase = ''
+      #       runHook preInstall
+      #       dune install --prefix=$out --libdir=$OCAMLFIND_DESTDIR lib examples
+      #       runHook postInstall
+      #     '';
+      #
+      #     propagatedBuildInputs = with pkgs.ocamlPackages; [
+      #       base
+      #       stdio
+      #       core
+      #       lwt
+      #       yojson
+      #       logs
+      #       fmt
+      #       ppx_jane
+      #     ];
+      #
+      #     doCheck = false;
+      #
+      #     meta = with pkgs.lib; {
+      #       description = "OCaml template with examples";
+      #       license = licenses.mit;
+      #     };
+      #   };
+      # };
+
+      formatter = treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/ocaml-shell/lib/dune b/templates/ocaml-shell/lib/dune
new file mode 100644
index 00000000..cd7d7aac
--- /dev/null
+++ b/templates/ocaml-shell/lib/dune
@@ -0,0 +1,5 @@
+(library
+ (public_name ocaml_template)
+ (name ocaml_template)
+ (libraries base stdio core lwt lwt.unix yojson logs logs.fmt)
+ (preprocess (pps ppx_jane)))
\ No newline at end of file
diff --git a/templates/ocaml-shell/lib/ocaml_template.ml b/templates/ocaml-shell/lib/ocaml_template.ml
new file mode 100644
index 00000000..4ef80e76
--- /dev/null
+++ b/templates/ocaml-shell/lib/ocaml_template.ml
@@ -0,0 +1,101 @@
+open Base
+open Stdio
+
+(** A simple greeting function that demonstrates string manipulation *)
+let greet ?(greeting = "Hello") name =
+  Printf.sprintf "%s, %s!" greeting (String.capitalize name)
+
+(** Mathematical utilities *)
+module Math = struct
+  (** Calculate fibonacci number *)
+  let rec fibonacci n =
+    if n <= 1 then n
+    else fibonacci (n - 1) + fibonacci (n - 2)
+
+  (** Check if a number is prime *)
+  let is_prime n =
+    if n < 2 then false
+    else
+      let rec check i =
+        if i * i > n then true
+        else if n % i = 0 then false
+        else check (i + 1)
+      in
+      check 2
+
+  (** Generate list of prime numbers up to n *)
+  let primes_up_to n =
+    List.range 2 n |> List.filter ~f:is_prime
+end
+
+(** JSON utilities using Yojson *)
+module Json_utils = struct
+  type person = {
+    name : string;
+    age : int;
+    email : string option;
+  }
+
+  let person_to_json { name; age; email } =
+    let email_json = match email with
+      | Some e -> `String e
+      | None -> `Null
+    in
+    `Assoc [
+      ("name", `String name);
+      ("age", `Int age);
+      ("email", email_json);
+    ]
+
+  let person_from_json = function
+    | `Assoc assoc ->
+      let name = match List.Assoc.find assoc ~equal:String.equal "name" with
+        | Some (`String s) -> s
+        | _ -> failwith "Missing or invalid name"
+      in
+      let age = match List.Assoc.find assoc ~equal:String.equal "age" with
+        | Some (`Int i) -> i
+        | _ -> failwith "Missing or invalid age"
+      in
+      let email = match List.Assoc.find assoc ~equal:String.equal "email" with
+        | Some (`String s) -> Some s
+        | Some `Null | None -> None
+        | _ -> failwith "Invalid email"
+      in
+      { name; age; email }
+    | _ -> failwith "Expected JSON object"
+end
+
+(** Async utilities using Lwt *)
+module Async_utils = struct
+  open Lwt.Syntax
+
+  (** Simulate an async operation *)
+  let async_greet ?(delay = 1.0) name =
+    let* () = Lwt_unix.sleep delay in
+    Lwt.return (greet name)
+
+  (** Process a list of items asynchronously *)
+  let async_map_p f lst =
+    lst |> List.map ~f |> Lwt.all
+
+  (** Timeout wrapper for async operations *)
+  let with_timeout ~timeout f =
+    Lwt.pick [
+      f ();
+      (let* () = Lwt_unix.sleep timeout in
+       Lwt.fail_with "Operation timed out");
+    ]
+end
+
+(** Logging utilities *)
+module Logger = struct
+  let setup_logging level =
+    Logs.set_level level;
+    Logs.set_reporter (Logs_fmt.reporter ())
+
+  let info msg = Logs.info (fun m -> m "%s" msg)
+  let warn msg = Logs.warn (fun m -> m "%s" msg)  
+  let error msg = Logs.err (fun m -> m "%s" msg)
+  let debug msg = Logs.debug (fun m -> m "%s" msg)
+end
\ No newline at end of file
diff --git a/templates/ocaml-shell/shell.nix b/templates/ocaml-shell/shell.nix
new file mode 100644
index 00000000..37f25c23
--- /dev/null
+++ b/templates/ocaml-shell/shell.nix
@@ -0,0 +1,57 @@
+# Legacy shell.nix for compatibility with non-flake Nix installations
+# For the best experience, use: nix develop
+let
+  # Import nixpkgs
+  pkgs = import <nixpkgs> {};
+
+  # If flake.lock exists, try to use flake-compat for consistency
+  flakeCompat =
+    if builtins.pathExists ./flake.lock
+    then let
+      lock = builtins.fromJSON (builtins.readFile ./flake.lock);
+      flake-compat = fetchTarball {
+        url = "https://github.com/edolstra/flake-compat/archive/master.tar.gz";
+      };
+    in
+      (import flake-compat {src = ./.;}).shellNix
+    else
+      # Fallback shell environment when flake.lock doesn't exist
+      pkgs.mkShell {
+        name = "ocaml-dev-legacy";
+
+        buildInputs = with pkgs; [
+          # OCaml core
+          ocaml
+          dune_3
+          opam
+
+          # Development tools
+          ocamlformat
+          ocamlPackages.merlin
+          ocamlPackages.utop
+          ocamlPackages.ocaml-lsp
+          ocamlPackages.findlib
+
+          # Essential libraries
+          ocamlPackages.base
+          ocamlPackages.stdio
+          ocamlPackages.alcotest
+
+          # Build tools
+          git
+          gnumake
+        ];
+
+        shellHook = ''
+          echo "🐪 OCaml Development Environment (Legacy Mode)"
+          echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+          echo "⚠️  You're using legacy shell.nix mode."
+          echo "💡 For the best experience, use: nix develop"
+          echo ""
+          echo "📦 OCaml $(ocaml -version | cut -d' ' -f4) ready!"
+          echo "🔨 Dune $(dune --version) available"
+          echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+        '';
+      };
+in
+  flakeCompat
diff --git a/templates/ocaml-shell/test/dune b/templates/ocaml-shell/test/dune
new file mode 100644
index 00000000..99d0484e
--- /dev/null
+++ b/templates/ocaml-shell/test/dune
@@ -0,0 +1,4 @@
+(test
+ (name test_ocaml_template)
+ (libraries ocaml_template alcotest qcheck base stdio)
+ (preprocess (pps ppx_jane)))
\ No newline at end of file
diff --git a/templates/ocaml-shell/test/test_ocaml_template.ml b/templates/ocaml-shell/test/test_ocaml_template.ml
new file mode 100644
index 00000000..59af419a
--- /dev/null
+++ b/templates/ocaml-shell/test/test_ocaml_template.ml
@@ -0,0 +1,138 @@
+open Base
+open Ocaml_template
+
+(** Alcotest unit tests *)
+module Unit_tests = struct
+  let test_greet () =
+    Alcotest.(check string) "default greeting" "Hello, World!" (greet "world");
+    Alcotest.(check string) "custom greeting" "Hi, Alice!" (greet ~greeting:"Hi" "alice")
+
+  let test_fibonacci () =
+    Alcotest.(check int) "fib(0)" 0 (Math.fibonacci 0);
+    Alcotest.(check int) "fib(1)" 1 (Math.fibonacci 1);
+    Alcotest.(check int) "fib(5)" 5 (Math.fibonacci 5);
+    Alcotest.(check int) "fib(10)" 55 (Math.fibonacci 10)
+
+  let test_is_prime () =
+    Alcotest.(check bool) "2 is prime" true (Math.is_prime 2);
+    Alcotest.(check bool) "3 is prime" true (Math.is_prime 3);
+    Alcotest.(check bool) "4 is not prime" false (Math.is_prime 4);
+    Alcotest.(check bool) "17 is prime" true (Math.is_prime 17)
+
+  let test_primes_up_to () =
+    let expected = [2; 3; 5; 7] in
+    Alcotest.(check (list int)) "primes up to 10" expected (Math.primes_up_to 10)
+
+  let test_json_roundtrip () =
+    let person = Json_utils.{ name = "Alice"; age = 30; email = Some "alice@example.com" } in
+    let json = Json_utils.person_to_json person in
+    let person' = Json_utils.person_from_json json in
+    Alcotest.(check string) "name preserved" person.name person'.name;
+    Alcotest.(check int) "age preserved" person.age person'.age;
+    Alcotest.(check (option string)) "email preserved" person.email person'.email
+end
+
+(** QCheck property-based tests *)
+module Property_tests = struct
+  open QCheck
+
+  let test_greet_not_empty =
+    Test.make ~count:100 ~name:"greet never returns empty string"
+      (string_of_size Gen.(1 -- 20))
+      (fun name -> String.length (greet name) > 0)
+
+  let test_fibonacci_monotonic =
+    Test.make ~count:50 ~name:"fibonacci is monotonic for small values"
+      Gen.(0 -- 20)
+      (fun n -> 
+        if n = 0 then true
+        else Math.fibonacci n >= Math.fibonacci (n - 1))
+
+  let test_prime_properties =
+    Test.make ~count:100 ~name:"prime numbers > 2 are odd"
+      Gen.(2 -- 100)
+      (fun n ->
+        if Math.is_prime n && n > 2 then n % 2 = 1
+        else true)
+
+  let test_json_roundtrip =
+    Test.make ~count:100 ~name:"JSON person roundtrip"
+      Gen.(triple (string_of_size (1 -- 20)) (0 -- 120) bool)
+      (fun (name, age, has_email) ->
+        let email = if has_email then Some (name ^ "@example.com") else None in
+        let person = Json_utils.{ name; age; email } in
+        let json = Json_utils.person_to_json person in
+        try
+          let person' = Json_utils.person_from_json json in
+          String.equal person.name person'.name && 
+          Int.equal person.age person'.age &&
+          Option.equal String.equal person.email person'.email
+        with
+        | _ -> false)
+
+  let all_property_tests = [
+    test_greet_not_empty;
+    test_fibonacci_monotonic;
+    test_prime_properties;
+    test_json_roundtrip;
+  ]
+end
+
+(** Async tests using Lwt *)
+module Async_tests = struct
+  let test_async_greet () =
+    let open Lwt.Syntax in
+    let* result = Async_utils.async_greet ~delay:0.1 "async" in
+    Alcotest.(check string) "async greeting" "Hello, Async!" result;
+    Lwt.return ()
+
+  let test_with_timeout () =
+    let open Lwt.Syntax in
+    (* This should complete within timeout *)
+    let* result = Async_utils.with_timeout ~timeout:1.0 (fun () ->
+      Async_utils.async_greet ~delay:0.1 "quick"
+    ) in
+    Alcotest.(check string) "quick operation" "Hello, Quick!" result;
+    
+    (* This should timeout *)
+    let* () = 
+      Lwt.catch
+        (fun () ->
+          let* _ = Async_utils.with_timeout ~timeout:0.1 (fun () ->
+            Async_utils.async_greet ~delay:1.0 "slow"
+          ) in
+          Lwt.fail_with "Should have timed out"
+        )
+        (function
+          | Failure "Operation timed out" -> Lwt.return ()
+          | e -> Lwt.fail e)
+    in
+    Lwt.return ()
+end
+
+(** Run all tests *)
+let () =
+  (* Run Alcotest unit tests *)
+  let unit_tests = [
+    "greet", [
+      Alcotest.test_case "basic greeting" `Quick Unit_tests.test_greet;
+    ];
+    "math", [
+      Alcotest.test_case "fibonacci" `Quick Unit_tests.test_fibonacci;
+      Alcotest.test_case "is_prime" `Quick Unit_tests.test_is_prime;
+      Alcotest.test_case "primes_up_to" `Quick Unit_tests.test_primes_up_to;
+    ];
+    "json", [
+      Alcotest.test_case "roundtrip" `Quick Unit_tests.test_json_roundtrip;
+    ];
+    (* "async", [
+      Alcotest_lwt.test_case "async_greet" `Quick (fun _ () -> Async_tests.test_async_greet ());
+      Alcotest_lwt.test_case "timeout" `Quick (fun _ () -> Async_tests.test_with_timeout ());
+    ]; *)
+  ] in
+  
+  Alcotest.run "OCaml Template Tests" unit_tests;
+  
+  (* Run QCheck property-based tests *)
+  Printf.printf "\n=== Property-based Tests ===\n";
+  QCheck_runner.run_tests Property_tests.all_property_tests |> ignore
\ No newline at end of file
diff --git a/templates/phoenix-shell/.envrc b/templates/phoenix-shell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/phoenix-shell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/phoenix-shell/.gitignore b/templates/phoenix-shell/.gitignore
new file mode 100644
index 00000000..2bbdbfe1
--- /dev/null
+++ b/templates/phoenix-shell/.gitignore
@@ -0,0 +1,2 @@
+.direnv
+result
diff --git a/templates/phoenix-shell/flake.lock b/templates/phoenix-shell/flake.lock
new file mode 100644
index 00000000..6ea7506b
--- /dev/null
+++ b/templates/phoenix-shell/flake.lock
@@ -0,0 +1,48 @@
+{
+  "nodes": {
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1747426788,
+        "narHash": "sha256-N4cp0asTsJCnRMFZ/k19V9akkxb7J/opG+K+jU57JGc=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "12a55407652e04dcf2309436eb06fef0d3713ef3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753006367,
+        "narHash": "sha256-tzbhc4XttkyEhswByk5R38l+ztN9UDbnj0cTcP6Hp9A=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "421b56313c65a0815a52b424777f55acf0b56ddf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/phoenix-shell/flake.nix b/templates/phoenix-shell/flake.nix
new file mode 100644
index 00000000..612e4948
--- /dev/null
+++ b/templates/phoenix-shell/flake.nix
@@ -0,0 +1,83 @@
+{
+  description = "A development shell for Elixir Phoenix Framework";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = inputs @ {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        ex = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/mix.exs'';
+          description = "Edit mix.exs";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            elixir
+            erlang
+            nodejs
+            postgresql
+            openssl
+            git
+          ]
+          # inotify-tools is Linux-only, use fswatch on Darwin instead
+          ++ pkgs.lib.optionals pkgs.stdenv.isLinux [inotify-tools]
+          ++ pkgs.lib.optionals pkgs.stdenv.isDarwin [fswatch]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Welcome to the phoenix devshell!"
+        '';
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/python-shell/.envrc b/templates/python-shell/.envrc
new file mode 100644
index 00000000..3550a30f
--- /dev/null
+++ b/templates/python-shell/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/templates/python-shell/README.md b/templates/python-shell/README.md
new file mode 100644
index 00000000..f5aff13d
--- /dev/null
+++ b/templates/python-shell/README.md
@@ -0,0 +1,483 @@
+# Python Development Shell Template
+
+A comprehensive Python development environment with modern tooling for building high-quality Python applications.
+
+## Features
+
+### Python Versions
+- **Python 3.12** - Latest stable Python with all modern features
+- **Python 3.11** - Alternative version support
+- **Virtual Environment** - Built-in venv support
+
+### Advanced Type Checking
+- **basedpyright** - Advanced type checker (Pylance backend) with superior inference
+- **mypy** - Static type checker with strict mode support
+- **Type Stubs** - Comprehensive type hint support
+
+### Lightning-Fast Linting & Formatting
+- **ruff** - Extremely fast Python linter and formatter (Rust-based)
+- **black** - Uncompromising code formatter
+- **isort** - Import statement organizer
+- **flake8** - Traditional Python linter (alternative)
+
+### Package Management Options
+- **Poetry** - Modern dependency management with lock files
+- **pip** - Traditional Python package installer
+- **pipenv** - pip + virtualenv wrapper
+- **uv** - Ultra-fast Python package installer
+
+### Comprehensive Testing
+- **pytest** - Modern testing framework with rich plugin ecosystem
+- **pytest-cov** - Code coverage analysis
+- **pytest-mock** - Mocking utilities
+- **pytest-asyncio** - Async testing support
+- **hypothesis** - Property-based testing framework
+- **tox** - Testing across multiple Python versions
+
+### Development Tools
+- **IPython** - Enhanced interactive Python shell
+- **Jupyter Lab** - Modern notebook interface
+- **pre-commit** - Git hook management
+- **bandit** - Security vulnerability scanner
+- **safety** - Dependency security checker
+
+### Profiling & Performance
+- **py-spy** - Sampling profiler (no code changes needed)
+- **memory-profiler** - Memory usage analysis
+- **line-profiler** - Line-by-line performance profiling
+- **cProfile** - Built-in Python profiler
+
+## Quick Start
+
+```bash
+# Create new project from template
+nix flake init -t github:connerohnesorge/dotfiles#python-shell
+
+# Enter development shell
+nix develop
+
+# Initialize project with Poetry (recommended)
+init-poetry
+
+# Or initialize with pip
+init-pip
+
+# Install dependencies
+deps-install
+
+# Run tests
+test
+
+# Start development
+dev
+```
+
+## Available Commands
+
+### Project Initialization
+- `init-poetry` - Initialize modern Poetry project with complete setup
+- `init-pip` - Initialize pip-based project with requirements files
+- `px` - Edit pyproject.toml
+- `rx` - Edit requirements.txt
+
+### Development
+- `dev` - Run main Python application
+- `repl` - Start IPython enhanced REPL
+- `notebook` - Launch Jupyter Lab for interactive development
+
+### Testing
+- `test` - Run tests with coverage analysis
+- `test-watch` - Run tests in watch mode (auto-rerun on changes)
+
+### Code Quality
+- `lint` - Run all linting tools (ruff, mypy, basedpyright)
+- `lint-ruff` - Fast linting with ruff
+- `lint-mypy` - Type checking with mypy
+- `lint-basedpyright` - Advanced type checking with basedpyright
+- `format` - Format code (black + isort)
+- `format-black` - Format with black
+- `format-isort` - Sort imports with isort
+
+### Dependencies
+- `deps-install` - Install project dependencies
+- `deps-update` - Update dependencies (Poetry projects)
+
+### Profiling
+- `profile-time` - Profile execution time with cProfile
+- `profile-memory` - Profile memory usage
+
+### Utilities
+- `clean` - Clean Python cache files and artifacts
+- `dx` - Edit flake.nix
+
+## Project Structure
+
+### Poetry Project (Recommended)
+```
+my-python-project/
+├── pyproject.toml           # Poetry configuration and dependencies
+├── src/
+│   ├── __init__.py          # Package initialization
+│   └── main.py              # Main application module
+├── tests/
+│   ├── __init__.py          # Test package
+│   └── test_main.py         # Test modules with pytest examples
+├── .pre-commit-config.yaml  # Pre-commit hook configuration
+├── .gitignore               # Comprehensive Python gitignore
+└── flake.nix                # Nix development environment
+```
+
+### Pip Project
+```
+my-python-project/
+├── requirements.txt         # Production dependencies
+├── requirements-dev.txt     # Development dependencies
+├── setup.py                 # Package configuration
+├── src/                     # Source code
+├── tests/                   # Test directory
+└── flake.nix                # Development environment
+```
+
+## Type Checking
+
+### basedpyright (Recommended)
+Advanced type checker with superior inference:
+
+```python
+from typing import List, Optional, Dict, Any
+
+def process_data(items: List[Dict[str, Any]]) -> Optional[str]:
+    """Process data with advanced type inference."""
+    if not items:
+        return None
+    
+    # basedpyright provides excellent inference here
+    result = [item.get("name", "unknown") for item in items]
+    return ", ".join(result)
+```
+
+### mypy Configuration
+```toml
+# pyproject.toml
+[tool.mypy]
+python_version = "3.12"
+strict = true
+warn_return_any = true
+warn_unused_configs = true
+disallow_untyped_defs = true
+```
+
+## Linting Configuration
+
+### ruff (Ultra-Fast Linting)
+```toml
+# pyproject.toml
+[tool.ruff]
+line-length = 88
+target-version = "py312"
+
+[tool.ruff.lint]
+select = [
+    "E",   # pycodestyle errors
+    "W",   # pycodestyle warnings
+    "F",   # Pyflakes
+    "I",   # isort
+    "B",   # flake8-bugbear
+    "C4",  # flake8-comprehensions
+    "UP",  # pyupgrade
+]
+```
+
+### black Configuration
+```toml
+# pyproject.toml
+[tool.black]
+line-length = 88
+target-version = ['py312']
+include = '\.pyi?$'
+```
+
+## Testing Strategy
+
+### pytest with Coverage
+```python
+import pytest
+from hypothesis import given, strategies as st
+from unittest.mock import Mock, patch
+
+def test_basic_functionality():
+    """Basic test example."""
+    assert 2 + 2 == 4
+
+@pytest.mark.parametrize("input,expected", [
+    ("hello", "HELLO"),
+    ("world", "WORLD"),
+])
+def test_parametrized(input, expected):
+    """Parametrized test example."""
+    assert input.upper() == expected
+
+@given(st.text())
+def test_property_based(text):
+    """Property-based test with hypothesis."""
+    assert len(text.upper()) == len(text)
+
+@pytest.mark.asyncio
+async def test_async_function():
+    """Async test example."""
+    result = await some_async_function()
+    assert result is not None
+```
+
+### Coverage Configuration
+```toml
+# pyproject.toml
+[tool.coverage.run]
+source = ["src"]
+omit = ["*/tests/*"]
+
+[tool.coverage.report]
+exclude_lines = [
+    "pragma: no cover",
+    "def __repr__",
+    "raise AssertionError",
+    "raise NotImplementedError",
+]
+```
+
+## Package Management
+
+### Poetry (Recommended)
+Modern dependency management with lock files:
+
+```bash
+# Add dependencies
+poetry add requests fastapi
+
+# Add development dependencies
+poetry add --group dev pytest black ruff
+
+# Install dependencies
+poetry install
+
+# Update dependencies
+poetry update
+
+# Show dependency tree
+poetry show --tree
+```
+
+### pip with Virtual Environments
+Traditional approach:
+
+```bash
+# Create virtual environment
+python -m venv venv
+source venv/bin/activate
+
+# Install dependencies
+pip install -r requirements-dev.txt
+pip install -e .
+
+# Freeze dependencies
+pip freeze > requirements.txt
+```
+
+## Advanced Features
+
+### Pre-commit Hooks
+Automatic code quality checks:
+
+```yaml
+# .pre-commit-config.yaml
+repos:
+  - repo: https://github.com/charliermarsh/ruff-pre-commit
+    rev: v0.0.292
+    hooks:
+      - id: ruff
+        args: [--fix, --exit-non-zero-on-fix]
+
+  - repo: https://github.com/psf/black
+    rev: 23.9.1
+    hooks:
+      - id: black
+
+  - repo: https://github.com/pycqa/isort
+    rev: 5.12.0
+    hooks:
+      - id: isort
+        args: ["--profile", "black"]
+```
+
+### Security Scanning
+```bash
+# Security vulnerability scanning
+bandit -r src/
+safety check
+
+# Dependency security check
+safety check --json
+```
+
+### Performance Profiling
+```python
+# Time profiling with py-spy (no code changes needed)
+py-spy record -o profile.svg -- python src/main.py
+
+# Memory profiling
+@profile
+def memory_intensive_function():
+    """Function to profile memory usage."""
+    data = [i for i in range(1000000)]
+    return sum(data)
+
+# Line profiling
+@profile
+def line_by_line_function():
+    """Function to profile line by line."""
+    for i in range(100):
+        result = i ** 2
+    return result
+```
+
+## Modern Python Features
+
+### Type Hints and Annotations
+```python
+from typing import Generic, TypeVar, Protocol
+from dataclasses import dataclass
+from enum import Enum
+
+T = TypeVar('T')
+
+class Comparable(Protocol):
+    def __lt__(self, other: 'Comparable') -> bool: ...
+
+@dataclass
+class Person:
+    name: str
+    age: int
+    
+    def __post_init__(self) -> None:
+        if self.age < 0:
+            raise ValueError("Age cannot be negative")
+
+class Status(Enum):
+    PENDING = "pending"
+    COMPLETE = "complete"
+    FAILED = "failed"
+```
+
+### Async/Await Support
+```python
+import asyncio
+import aiohttp
+from typing import List
+
+async def fetch_data(url: str) -> dict:
+    """Fetch data asynchronously."""
+    async with aiohttp.ClientSession() as session:
+        async with session.get(url) as response:
+            return await response.json()
+
+async def process_urls(urls: List[str]) -> List[dict]:
+    """Process multiple URLs concurrently."""
+    tasks = [fetch_data(url) for url in urls]
+    return await asyncio.gather(*tasks)
+```
+
+## IDE Integration
+
+### Language Server Support
+- **Pylsp** - Python LSP server
+- **Pyright** - Microsoft's Python language server
+- **Jedi Language Server** - Alternative language server
+
+### Editor Configuration
+Most editors automatically detect the Python environment and tools:
+
+- **VS Code**: Automatically uses basedpyright/Pylance
+- **PyCharm**: Built-in support for all tools
+- **Vim/Neovim**: Works with language servers
+- **Emacs**: LSP mode integration
+
+## Performance Optimization
+
+### Profiling Workflow
+```bash
+# 1. Quick profiling with py-spy
+py-spy record -o profile.svg -- python src/main.py
+
+# 2. Detailed line profiling
+kernprof -l -v src/main.py
+
+# 3. Memory profiling
+python -m memory_profiler src/main.py
+
+# 4. Built-in profiling
+python -m cProfile -s cumulative src/main.py
+```
+
+### Optimization Tips
+- Use `ruff` for fast linting in CI/CD
+- Enable `basedpyright` strict mode for better type safety
+- Use `hypothesis` for property-based testing
+- Profile before optimizing
+- Use `py-spy` for production profiling
+
+## Platform Support
+
+- ✅ **Linux** (x86_64, ARM64)
+- ✅ **macOS** (Intel, Apple Silicon)
+- ✅ **Windows** (via WSL)
+
+## Best Practices
+
+### Code Organization
+```python
+# Modern Python imports
+from __future__ import annotations  # Enable PEP 563
+
+import sys
+from pathlib import Path
+from typing import List, Dict, Optional
+from dataclasses import dataclass
+
+# Local imports
+from .utils import helper_function
+from .models import DataModel
+```
+
+### Error Handling
+```python
+from typing import Result, Ok, Err  # Use a Result type library
+
+def safe_divide(a: float, b: float) -> Result[float, str]:
+    """Safe division with proper error handling."""
+    if b == 0:
+        return Err("Division by zero")
+    return Ok(a / b)
+```
+
+### Testing Best Practices
+- Write tests first (TDD)
+- Use descriptive test names
+- Test edge cases with `hypothesis`
+- Mock external dependencies
+- Aim for >90% code coverage
+
+## Troubleshooting
+
+### Common Issues
+**Import errors**: Check PYTHONPATH and virtual environment
+**Type errors**: Ensure all dependencies have type stubs
+**Slow linting**: Use `ruff` instead of `flake8` for speed
+**Test failures**: Check pytest configuration and fixtures
+
+### Performance Tips
+- Use `uv` for faster package installation
+- Enable `ruff` cache for faster linting
+- Use `pytest-xdist` for parallel testing
+- Profile with `py-spy` for minimal overhead
+
+This template provides everything needed for professional Python development with cutting-edge tooling and best practices!
\ No newline at end of file
diff --git a/templates/python-shell/flake.lock b/templates/python-shell/flake.lock
new file mode 100644
index 00000000..c08ddc59
--- /dev/null
+++ b/templates/python-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1754151594,
+        "narHash": "sha256-S30TWshtDmNlU30u842RidFUraKj1f2dd4nrKRHm3gE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "7b6929d8b900de3142638310f8bc40cff4f2c507",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754061284,
+        "narHash": "sha256-ONcNxdSiPyJ9qavMPJYAXDNBzYobHRxw0WbT38lKbwU=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "58bd4da459f0a39e506847109a2a5cfceb837796",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/python-shell/flake.nix b/templates/python-shell/flake.nix
new file mode 100644
index 00000000..58e8dc5f
--- /dev/null
+++ b/templates/python-shell/flake.nix
@@ -0,0 +1,125 @@
+{
+  description = "A development shell for Python";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        config.allowUnfree = true;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+          deps = [pkgs.git];
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "python-dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            # Nix tooling
+            alejandra
+            nixd
+            statix
+            deadnix
+
+            # Python interpreter and package managers
+            uv # Best
+
+            # Type checking and linting
+            pyrefly # Advanced type checker (Pylance)
+            mypy # Static type checker
+            ruff # Fast Python linter and formatter
+            black # Code formatter
+            isort # Import sorter
+
+            # Development utilities
+            git
+            curl
+            jq
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          # Set up Python environment
+          export PYTHONPATH="$PWD/src:$PYTHONPATH"
+          export PYTHONDONTWRITEBYTECODE=1
+          export PYTHONUNBUFFERED=1
+        '';
+      };
+
+      packages = {
+        # Example Python package build (uncomment and customize)
+        # default = pkgs.python312Packages.buildPythonApplication {
+        #   pname = "my-python-app";
+        #   version = "0.1.0";
+        #   src = ./.;
+        #   propagatedBuildInputs = with pkgs.python312Packages; [
+        #     requests
+        #     click
+        #   ];
+        #   checkInputs = with pkgs.python312Packages; [
+        #     pytest
+        #     pytest-cov
+        #   ];
+        #   checkPhase = ''
+        #     pytest
+        #   '';
+        #   meta = with pkgs.lib; {
+        #     description = "My Python application";
+        #     homepage = "https://github.com/user/my-python-app";
+        #     license = licenses.mit;
+        #     maintainers = with maintainers; [ ];
+        #   };
+        # };
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            black.enable = true; # Python formatter
+            ruff-format.enable = true; # Python linter/formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/remix-shell/flake.lock b/templates/remix-shell/flake.lock
new file mode 100644
index 00000000..5299b045
--- /dev/null
+++ b/templates/remix-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1748792178,
+        "narHash": "sha256-BHmgfHlCJVNisJShVaEmfDIr/Ip58i/4oFGlD1iK6lk=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "5929de975bcf4c7c8d8b5ca65c8cd9ef9e44523e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1748243702,
+        "narHash": "sha256-9YzfeN8CB6SzNPyPm2XjRRqSixDopTapaRsnTpXUEY8=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "1f3f7b784643d488ba4bf315638b2b0a4c5fb007",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/remix-shell/flake.nix b/templates/remix-shell/flake.nix
new file mode 100644
index 00000000..ee7c95a0
--- /dev/null
+++ b/templates/remix-shell/flake.nix
@@ -0,0 +1,110 @@
+{
+  description = "A development shell for Remix JS with bun";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+    # Uncomment to enable bun2nix for building Bun packages with Nix
+    # bun2nix.url = "github:baileyluTCD/bun2nix";
+    # bun2nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = inputs @ {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    # bun2nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        rx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/remix.config.js'';
+          description = "Edit remix.config.js";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            bun
+            nodejs
+            yarn
+            prettier
+            eslint
+            typescript
+            # Uncomment to add bun2nix
+            # bun2nix.packages.${system}.default
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Welcome to the remix-js devshell!"
+        '';
+      };
+
+      # Uncomment to build packages with bun2nix
+      # packages = forAllSystems (system: let
+      #   pkgs = import nixpkgs {
+      #     inherit system;
+      #   };
+      # in {
+      #   # Example package using mkBunDerivation
+      #   # my-remix-app = pkgs.callPackage ./default.nix {
+      #   #   inherit (bun2nix.lib.${system}) mkBunDerivation;
+      #   # };
+      # });
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
+# To use bun2nix:
+# 1. Uncomment the bun2nix input and binary cache configuration
+# 2. Uncomment the bun2nix package in devShells.default.packages
+# 3. Add this postinstall script to your package.json:
+#    "scripts": {
+#      "postinstall": "bun2nix -o bun.nix"
+#    }
+# 4. Run 'bun install' to generate bun.nix
+# 5. Uncomment and configure the packages section to build your app
+# 6. Modify default.nix for your specific build requirements
+
diff --git a/templates/rust-shell/.envrc b/templates/rust-shell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/rust-shell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/rust-shell/.gitignore b/templates/rust-shell/.gitignore
new file mode 100644
index 00000000..889fecca
--- /dev/null
+++ b/templates/rust-shell/.gitignore
@@ -0,0 +1,3 @@
+.direnv
+result
+target
diff --git a/templates/rust-shell/flake.lock b/templates/rust-shell/flake.lock
new file mode 100644
index 00000000..1bea079e
--- /dev/null
+++ b/templates/rust-shell/flake.lock
@@ -0,0 +1,133 @@
+{
+  "nodes": {
+    "crane": {
+      "locked": {
+        "lastModified": 1762538466,
+        "narHash": "sha256-8zrIPl6J+wLm9MH5ksHcW7BUHo7jSNOu0/hA0ohOOaM=",
+        "owner": "ipetkov",
+        "repo": "crane",
+        "rev": "0cea393fffb39575c46b7a0318386467272182fe",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ipetkov",
+        "repo": "crane",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1762482733,
+        "narHash": "sha256-g/da4FzvckvbiZT075Sb1/YDNDr+tGQgh4N8i5ceYMg=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "e1ebeec86b771e9d387dd02d82ffdc77ac753abc",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1744536153,
+        "narHash": "sha256-awS2zRgF4uTwrOKwwiJcByDzDOdo3Q1rPZbiHQg/N38=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "18dd725c29603f582cf1900e0d25f9f1063dbf11",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "crane": "crane",
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "rust-overlay": "rust-overlay",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": "nixpkgs_2"
+      },
+      "locked": {
+        "lastModified": 1762742448,
+        "narHash": "sha256-XMxV0h13gg63s0sV6beihCIqdpcJhtbse6DHI743nvo=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "7f3556887e3375dc26ff1601b57c93ee286f2c5e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1762410071,
+        "narHash": "sha256-aF5fvoZeoXNPxT0bejFUBXeUjXfHLSL7g+mjR/p5TEg=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "97a30861b13c3731a84e09405414398fbf3e109f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/rust-shell/flake.nix b/templates/rust-shell/flake.nix
new file mode 100644
index 00000000..587d84e1
--- /dev/null
+++ b/templates/rust-shell/flake.nix
@@ -0,0 +1,106 @@
+{
+  description = "A development shell for rust";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    rust-overlay.url = "github:oxalica/rust-overlay";
+    crane.url = "github:ipetkov/crane";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    rust-overlay,
+    crane,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [rust-overlay.overlays.default];
+      };
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        rx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/Cargo.toml'';
+          description = "Edit Cargo.toml";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+      # Optional: Initialize crane for building packages
+      # craneLib = (crane.mkLib pkgs).overrideToolchain (p: p.rust-bin.stable.latest.default);
+      # Optional: Example crane package build (uncomment to use)
+      # my-crate = craneLib.buildPackage {
+      #   src = craneLib.cleanCargoSource ./.;
+      #   strictDeps = true;
+      # };
+    in {
+      # Optional: Define packages if using crane to build (uncomment to use)
+      # packages = forAllSystems (system: let
+      #   pkgs = import nixpkgs {
+      #     inherit system;
+      #     overlays = [rust-overlay.overlays.default];
+      #   };
+      #   craneLib = (crane.mkLib pkgs).overrideToolchain (p: p.rust-bin.stable.latest.default);
+      # in {
+      #   default = craneLib.buildPackage {
+      #     src = craneLib.cleanCargoSource ./.;
+      #     strictDeps = true;
+      #   };
+      # });
+
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+        # Available packages on https://search.nixos.org/packages
+        buildInputs = with pkgs;
+          [
+            alejandra # Nix
+            nixd
+            statix
+            deadnix
+            just
+            rust-bin.stable.latest.default
+            rust-bin.stable.latest.rust-analyzer
+          ]
+          ++ builtins.attrValues scriptPackages;
+        shellHook = ''
+          echo "Welcome to the rust devshell!"
+        '';
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            rustfmt.enable = true; # Rust formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/starlight-shell/.gitignore b/templates/starlight-shell/.gitignore
new file mode 100644
index 00000000..6240da8b
--- /dev/null
+++ b/templates/starlight-shell/.gitignore
@@ -0,0 +1,21 @@
+# build output
+dist/
+# generated types
+.astro/
+
+# dependencies
+node_modules/
+
+# logs
+npm-debug.log*
+yarn-debug.log*
+yarn-error.log*
+pnpm-debug.log*
+
+
+# environment variables
+.env
+.env.production
+
+# macOS-specific files
+.DS_Store
diff --git a/templates/starlight-shell/README.md b/templates/starlight-shell/README.md
new file mode 100644
index 00000000..1b7f5c3d
--- /dev/null
+++ b/templates/starlight-shell/README.md
@@ -0,0 +1,49 @@
+# Starlight Starter Kit: Basics
+
+[![Built with Starlight](https://astro.badg.es/v2/built-with-starlight/tiny.svg)](https://starlight.astro.build)
+
+```
+npm create astro@latest -- --template starlight
+```
+
+> 🧑‍🚀 **Seasoned astronaut?** Delete this file. Have fun!
+
+## 🚀 Project Structure
+
+Inside of your Astro + Starlight project, you'll see the following folders and files:
+
+```
+.
+├── public/
+├── src/
+│   ├── assets/
+│   ├── content/
+│   │   └── docs/
+│   └── content.config.ts
+├── astro.config.mjs
+├── package.json
+└── tsconfig.json
+```
+
+Starlight looks for `.md` or `.mdx` files in the `src/content/docs/` directory. Each file is exposed as a route based on its file name.
+
+Images can be added to `src/assets/` and embedded in Markdown with a relative link.
+
+Static assets, like favicons, can be placed in the `public/` directory.
+
+## 🧞 Commands
+
+All commands are run from the root of the project, from a terminal:
+
+| Command                   | Action                                           |
+| :------------------------ | :----------------------------------------------- |
+| `npm install`             | Installs dependencies                            |
+| `npm run dev`             | Starts local dev server at `localhost:4321`      |
+| `npm run build`           | Build your production site to `./dist/`          |
+| `npm run preview`         | Preview your build locally, before deploying     |
+| `npm run astro ...`       | Run CLI commands like `astro add`, `astro check` |
+| `npm run astro -- --help` | Get help using the Astro CLI                     |
+
+## 👀 Want to learn more?
+
+Check out [Starlight’s docs](https://starlight.astro.build/), read [the Astro documentation](https://docs.astro.build), or jump into the [Astro Discord server](https://astro.build/chat).
diff --git a/templates/starlight-shell/astro.config.mjs b/templates/starlight-shell/astro.config.mjs
new file mode 100644
index 00000000..271feb51
--- /dev/null
+++ b/templates/starlight-shell/astro.config.mjs
@@ -0,0 +1,41 @@
+// @ts-check
+import { defineConfig } from 'astro/config';
+import starlight from '@astrojs/starlight';
+import starlightLinksValidator from 'starlight-links-validator';
+import starlightLlmsTxt from 'starlight-llms-txt';
+import starlightImageZoom from 'starlight-image-zoom';
+import starlightSiteGraph from 'starlight-site-graph';
+import starlightContextualMenu from 'starlight-contextual-menu';
+
+// https://astro.build/config
+export default defineConfig({
+	site: 'https://example.com/',
+	integrations: [
+		starlight({
+			title: 'My Docs',
+			social: [{ icon: 'github', label: 'GitHub', href: 'https://github.com/withastro/starlight' }],
+			plugins: [
+				starlightLinksValidator(),
+				starlightLlmsTxt(),
+				starlightImageZoom(),
+				starlightSiteGraph(),
+				starlightContextualMenu({
+					actions: ['copy', 'view', 'chatgpt', 'claude']
+				}),
+			],
+			sidebar: [
+				{
+					label: 'Guides',
+					items: [
+						// Each item here is one entry in the navigation menu.
+						{ label: 'Example Guide', slug: 'guides/example' },
+					],
+				},
+				{
+					label: 'Reference',
+					autogenerate: { directory: 'reference' },
+				},
+			],
+		}),
+	],
+});
diff --git a/templates/starlight-shell/bun.lock b/templates/starlight-shell/bun.lock
new file mode 100644
index 00000000..760bff23
--- /dev/null
+++ b/templates/starlight-shell/bun.lock
@@ -0,0 +1,1173 @@
+{
+  "lockfileVersion": 1,
+  "workspaces": {
+    "": {
+      "name": "starlight-shell",
+      "dependencies": {
+        "@astrojs/starlight": "^0.35.2",
+        "astro": "^5.6.1",
+        "sharp": "^0.34.2",
+        "starlight-contextual-menu": "^0.1.3",
+        "starlight-image-zoom": "^0.13.0",
+        "starlight-links-validator": "^0.17.0",
+        "starlight-llms-txt": "^0.6.0",
+        "starlight-site-graph": "^0.4.1",
+      },
+    },
+  },
+  "packages": {
+    "@astrojs/compiler": ["@astrojs/compiler@2.12.2", "", {}, "sha512-w2zfvhjNCkNMmMMOn5b0J8+OmUaBL1o40ipMvqcG6NRpdC+lKxmTi48DT8Xw0SzJ3AfmeFLB45zXZXtmbsjcgw=="],
+
+    "@astrojs/internal-helpers": ["@astrojs/internal-helpers@0.7.1", "", {}, "sha512-7dwEVigz9vUWDw3nRwLQ/yH/xYovlUA0ZD86xoeKEBmkz9O6iELG1yri67PgAPW6VLL/xInA4t7H0CK6VmtkKQ=="],
+
+    "@astrojs/markdown-remark": ["@astrojs/markdown-remark@6.3.5", "", { "dependencies": { "@astrojs/internal-helpers": "0.7.1", "@astrojs/prism": "3.3.0", "github-slugger": "^2.0.0", "hast-util-from-html": "^2.0.3", "hast-util-to-text": "^4.0.2", "import-meta-resolve": "^4.1.0", "js-yaml": "^4.1.0", "mdast-util-definitions": "^6.0.0", "rehype-raw": "^7.0.0", "rehype-stringify": "^10.0.1", "remark-gfm": "^4.0.1", "remark-parse": "^11.0.0", "remark-rehype": "^11.1.2", "remark-smartypants": "^3.0.2", "shiki": "^3.2.1", "smol-toml": "^1.3.4", "unified": "^11.0.5", "unist-util-remove-position": "^5.0.0", "unist-util-visit": "^5.0.0", "unist-util-visit-parents": "^6.0.1", "vfile": "^6.0.3" } }, "sha512-MiR92CkE2BcyWf3b86cBBw/1dKiOH0qhLgXH2OXA6cScrrmmks1Rr4Tl0p/lFpvmgQQrP54Pd1uidJfmxGrpWQ=="],
+
+    "@astrojs/mdx": ["@astrojs/mdx@4.3.3", "", { "dependencies": { "@astrojs/markdown-remark": "6.3.5", "@mdx-js/mdx": "^3.1.0", "acorn": "^8.14.1", "es-module-lexer": "^1.6.0", "estree-util-visit": "^2.0.0", "hast-util-to-html": "^9.0.5", "kleur": "^4.1.5", "rehype-raw": "^7.0.0", "remark-gfm": "^4.0.1", "remark-smartypants": "^3.0.2", "source-map": "^0.7.4", "unist-util-visit": "^5.0.0", "vfile": "^6.0.3" }, "peerDependencies": { "astro": "^5.0.0" } }, "sha512-+9+xGP2TBXxcm84cpiq4S9JbuHOHM1fcvREfqW7VHxlUyfUQPByoJ9YYliqHkLS6BMzG+O/+o7n8nguVhuEv4w=="],
+
+    "@astrojs/prism": ["@astrojs/prism@3.3.0", "", { "dependencies": { "prismjs": "^1.30.0" } }, "sha512-q8VwfU/fDZNoDOf+r7jUnMC2//H2l0TuQ6FkGJL8vD8nw/q5KiL3DS1KKBI3QhI9UQhpJ5dc7AtqfbXWuOgLCQ=="],
+
+    "@astrojs/sitemap": ["@astrojs/sitemap@3.5.0", "", { "dependencies": { "sitemap": "^8.0.0", "stream-replace-string": "^2.0.0", "zod": "^3.24.4" } }, "sha512-ldOvoBxuRgpcdndzksskOTzU55g76tkHC/POpejUbPGz6zR4rJKiXh8thX4WEPWDhCTZUafhJ1qf7k1muStHfg=="],
+
+    "@astrojs/starlight": ["@astrojs/starlight@0.35.2", "", { "dependencies": { "@astrojs/markdown-remark": "^6.3.1", "@astrojs/mdx": "^4.2.3", "@astrojs/sitemap": "^3.3.0", "@pagefind/default-ui": "^1.3.0", "@types/hast": "^3.0.4", "@types/js-yaml": "^4.0.9", "@types/mdast": "^4.0.4", "astro-expressive-code": "^0.41.1", "bcp-47": "^2.1.0", "hast-util-from-html": "^2.0.1", "hast-util-select": "^6.0.2", "hast-util-to-string": "^3.0.0", "hastscript": "^9.0.0", "i18next": "^23.11.5", "js-yaml": "^4.1.0", "klona": "^2.0.6", "mdast-util-directive": "^3.0.0", "mdast-util-to-markdown": "^2.1.0", "mdast-util-to-string": "^4.0.0", "pagefind": "^1.3.0", "rehype": "^13.0.1", "rehype-format": "^5.0.0", "remark-directive": "^3.0.0", "ultrahtml": "^1.6.0", "unified": "^11.0.5", "unist-util-visit": "^5.0.0", "vfile": "^6.0.2" }, "peerDependencies": { "astro": "^5.5.0" } }, "sha512-curGghoW4s5pCbW2tINsJPoxEYPan87ptCOv7GZ+S24N3J6AyaOu/OsjZDEMaIpo3ZlObM5DQn+w7iXl3drDhQ=="],
+
+    "@astrojs/telemetry": ["@astrojs/telemetry@3.3.0", "", { "dependencies": { "ci-info": "^4.2.0", "debug": "^4.4.0", "dlv": "^1.1.3", "dset": "^3.1.4", "is-docker": "^3.0.0", "is-wsl": "^3.1.0", "which-pm-runs": "^1.1.0" } }, "sha512-UFBgfeldP06qu6khs/yY+q1cDAaArM2/7AEIqQ9Cuvf7B1hNLq0xDrZkct+QoIGyjq56y8IaE2I3CTvG99mlhQ=="],
+
+    "@babel/helper-string-parser": ["@babel/helper-string-parser@7.27.1", "", {}, "sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA=="],
+
+    "@babel/helper-validator-identifier": ["@babel/helper-validator-identifier@7.27.1", "", {}, "sha512-D2hP9eA+Sqx1kBZgzxZh0y1trbuU+JoDkiEwqhQ36nodYqJwyEIhPSdMNd7lOm/4io72luTPWH20Yda0xOuUow=="],
+
+    "@babel/parser": ["@babel/parser@7.28.3", "", { "dependencies": { "@babel/types": "^7.28.2" }, "bin": { "parser": "bin/babel-parser.js" } }, "sha512-7+Ey1mAgYqFAx2h0RuoxcQT5+MlG3GTV0TQrgr7/ZliKsm/MNDxVVutlWaziMq7wJNAz8MTqz55XLpWvva6StA=="],
+
+    "@babel/runtime": ["@babel/runtime@7.28.3", "", {}, "sha512-9uIQ10o0WGdpP6GDhXcdOJPJuDgFtIDtN/9+ArJQ2NAfAmiuhTQdzkaTGR33v43GYS2UrSA0eX2pPPHoFVvpxA=="],
+
+    "@babel/types": ["@babel/types@7.28.2", "", { "dependencies": { "@babel/helper-string-parser": "^7.27.1", "@babel/helper-validator-identifier": "^7.27.1" } }, "sha512-ruv7Ae4J5dUYULmeXw1gmb7rYRz57OWCPM57pHojnLq/3Z1CK2lNSLTCVjxVk1F/TZHwOZZrOWi0ur95BbLxNQ=="],
+
+    "@capsizecss/unpack": ["@capsizecss/unpack@2.4.0", "", { "dependencies": { "blob-to-buffer": "^1.2.8", "cross-fetch": "^3.0.4", "fontkit": "^2.0.2" } }, "sha512-GrSU71meACqcmIUxPYOJvGKF0yryjN/L1aCuE9DViCTJI7bfkjgYDPD1zbNDcINJwSSP6UaBZY9GAbYDO7re0Q=="],
+
+    "@ctrl/tinycolor": ["@ctrl/tinycolor@4.1.0", "", {}, "sha512-WyOx8cJQ+FQus4Mm4uPIZA64gbk3Wxh0so5Lcii0aJifqwoVOlfFtorjLE0Hen4OYyHZMXDWqMmaQemBhgxFRQ=="],
+
+    "@emnapi/runtime": ["@emnapi/runtime@1.4.5", "", { "dependencies": { "tslib": "^2.4.0" } }, "sha512-++LApOtY0pEEz1zrd9vy1/zXVaVJJ/EbAF3u0fXIzPJEDtnITsBGbbK0EkM72amhl/R5b+5xx0Y/QhcVOpuulg=="],
+
+    "@esbuild/aix-ppc64": ["@esbuild/aix-ppc64@0.25.9", "", { "os": "aix", "cpu": "ppc64" }, "sha512-OaGtL73Jck6pBKjNIe24BnFE6agGl+6KxDtTfHhy1HmhthfKouEcOhqpSL64K4/0WCtbKFLOdzD/44cJ4k9opA=="],
+
+    "@esbuild/android-arm": ["@esbuild/android-arm@0.25.9", "", { "os": "android", "cpu": "arm" }, "sha512-5WNI1DaMtxQ7t7B6xa572XMXpHAaI/9Hnhk8lcxF4zVN4xstUgTlvuGDorBguKEnZO70qwEcLpfifMLoxiPqHQ=="],
+
+    "@esbuild/android-arm64": ["@esbuild/android-arm64@0.25.9", "", { "os": "android", "cpu": "arm64" }, "sha512-IDrddSmpSv51ftWslJMvl3Q2ZT98fUSL2/rlUXuVqRXHCs5EUF1/f+jbjF5+NG9UffUDMCiTyh8iec7u8RlTLg=="],
+
+    "@esbuild/android-x64": ["@esbuild/android-x64@0.25.9", "", { "os": "android", "cpu": "x64" }, "sha512-I853iMZ1hWZdNllhVZKm34f4wErd4lMyeV7BLzEExGEIZYsOzqDWDf+y082izYUE8gtJnYHdeDpN/6tUdwvfiw=="],
+
+    "@esbuild/darwin-arm64": ["@esbuild/darwin-arm64@0.25.9", "", { "os": "darwin", "cpu": "arm64" }, "sha512-XIpIDMAjOELi/9PB30vEbVMs3GV1v2zkkPnuyRRURbhqjyzIINwj+nbQATh4H9GxUgH1kFsEyQMxwiLFKUS6Rg=="],
+
+    "@esbuild/darwin-x64": ["@esbuild/darwin-x64@0.25.9", "", { "os": "darwin", "cpu": "x64" }, "sha512-jhHfBzjYTA1IQu8VyrjCX4ApJDnH+ez+IYVEoJHeqJm9VhG9Dh2BYaJritkYK3vMaXrf7Ogr/0MQ8/MeIefsPQ=="],
+
+    "@esbuild/freebsd-arm64": ["@esbuild/freebsd-arm64@0.25.9", "", { "os": "freebsd", "cpu": "arm64" }, "sha512-z93DmbnY6fX9+KdD4Ue/H6sYs+bhFQJNCPZsi4XWJoYblUqT06MQUdBCpcSfuiN72AbqeBFu5LVQTjfXDE2A6Q=="],
+
+    "@esbuild/freebsd-x64": ["@esbuild/freebsd-x64@0.25.9", "", { "os": "freebsd", "cpu": "x64" }, "sha512-mrKX6H/vOyo5v71YfXWJxLVxgy1kyt1MQaD8wZJgJfG4gq4DpQGpgTB74e5yBeQdyMTbgxp0YtNj7NuHN0PoZg=="],
+
+    "@esbuild/linux-arm": ["@esbuild/linux-arm@0.25.9", "", { "os": "linux", "cpu": "arm" }, "sha512-HBU2Xv78SMgaydBmdor38lg8YDnFKSARg1Q6AT0/y2ezUAKiZvc211RDFHlEZRFNRVhcMamiToo7bDx3VEOYQw=="],
+
+    "@esbuild/linux-arm64": ["@esbuild/linux-arm64@0.25.9", "", { "os": "linux", "cpu": "arm64" }, "sha512-BlB7bIcLT3G26urh5Dmse7fiLmLXnRlopw4s8DalgZ8ef79Jj4aUcYbk90g8iCa2467HX8SAIidbL7gsqXHdRw=="],
+
+    "@esbuild/linux-ia32": ["@esbuild/linux-ia32@0.25.9", "", { "os": "linux", "cpu": "ia32" }, "sha512-e7S3MOJPZGp2QW6AK6+Ly81rC7oOSerQ+P8L0ta4FhVi+/j/v2yZzx5CqqDaWjtPFfYz21Vi1S0auHrap3Ma3A=="],
+
+    "@esbuild/linux-loong64": ["@esbuild/linux-loong64@0.25.9", "", { "os": "linux", "cpu": "none" }, "sha512-Sbe10Bnn0oUAB2AalYztvGcK+o6YFFA/9829PhOCUS9vkJElXGdphz0A3DbMdP8gmKkqPmPcMJmJOrI3VYB1JQ=="],
+
+    "@esbuild/linux-mips64el": ["@esbuild/linux-mips64el@0.25.9", "", { "os": "linux", "cpu": "none" }, "sha512-YcM5br0mVyZw2jcQeLIkhWtKPeVfAerES5PvOzaDxVtIyZ2NUBZKNLjC5z3/fUlDgT6w89VsxP2qzNipOaaDyA=="],
+
+    "@esbuild/linux-ppc64": ["@esbuild/linux-ppc64@0.25.9", "", { "os": "linux", "cpu": "ppc64" }, "sha512-++0HQvasdo20JytyDpFvQtNrEsAgNG2CY1CLMwGXfFTKGBGQT3bOeLSYE2l1fYdvML5KUuwn9Z8L1EWe2tzs1w=="],
+
+    "@esbuild/linux-riscv64": ["@esbuild/linux-riscv64@0.25.9", "", { "os": "linux", "cpu": "none" }, "sha512-uNIBa279Y3fkjV+2cUjx36xkx7eSjb8IvnL01eXUKXez/CBHNRw5ekCGMPM0BcmqBxBcdgUWuUXmVWwm4CH9kg=="],
+
+    "@esbuild/linux-s390x": ["@esbuild/linux-s390x@0.25.9", "", { "os": "linux", "cpu": "s390x" }, "sha512-Mfiphvp3MjC/lctb+7D287Xw1DGzqJPb/J2aHHcHxflUo+8tmN/6d4k6I2yFR7BVo5/g7x2Monq4+Yew0EHRIA=="],
+
+    "@esbuild/linux-x64": ["@esbuild/linux-x64@0.25.9", "", { "os": "linux", "cpu": "x64" }, "sha512-iSwByxzRe48YVkmpbgoxVzn76BXjlYFXC7NvLYq+b+kDjyyk30J0JY47DIn8z1MO3K0oSl9fZoRmZPQI4Hklzg=="],
+
+    "@esbuild/netbsd-arm64": ["@esbuild/netbsd-arm64@0.25.9", "", { "os": "none", "cpu": "arm64" }, "sha512-9jNJl6FqaUG+COdQMjSCGW4QiMHH88xWbvZ+kRVblZsWrkXlABuGdFJ1E9L7HK+T0Yqd4akKNa/lO0+jDxQD4Q=="],
+
+    "@esbuild/netbsd-x64": ["@esbuild/netbsd-x64@0.25.9", "", { "os": "none", "cpu": "x64" }, "sha512-RLLdkflmqRG8KanPGOU7Rpg829ZHu8nFy5Pqdi9U01VYtG9Y0zOG6Vr2z4/S+/3zIyOxiK6cCeYNWOFR9QP87g=="],
+
+    "@esbuild/openbsd-arm64": ["@esbuild/openbsd-arm64@0.25.9", "", { "os": "openbsd", "cpu": "arm64" }, "sha512-YaFBlPGeDasft5IIM+CQAhJAqS3St3nJzDEgsgFixcfZeyGPCd6eJBWzke5piZuZ7CtL656eOSYKk4Ls2C0FRQ=="],
+
+    "@esbuild/openbsd-x64": ["@esbuild/openbsd-x64@0.25.9", "", { "os": "openbsd", "cpu": "x64" }, "sha512-1MkgTCuvMGWuqVtAvkpkXFmtL8XhWy+j4jaSO2wxfJtilVCi0ZE37b8uOdMItIHz4I6z1bWWtEX4CJwcKYLcuA=="],
+
+    "@esbuild/openharmony-arm64": ["@esbuild/openharmony-arm64@0.25.9", "", { "os": "none", "cpu": "arm64" }, "sha512-4Xd0xNiMVXKh6Fa7HEJQbrpP3m3DDn43jKxMjxLLRjWnRsfxjORYJlXPO4JNcXtOyfajXorRKY9NkOpTHptErg=="],
+
+    "@esbuild/sunos-x64": ["@esbuild/sunos-x64@0.25.9", "", { "os": "sunos", "cpu": "x64" }, "sha512-WjH4s6hzo00nNezhp3wFIAfmGZ8U7KtrJNlFMRKxiI9mxEK1scOMAaa9i4crUtu+tBr+0IN6JCuAcSBJZfnphw=="],
+
+    "@esbuild/win32-arm64": ["@esbuild/win32-arm64@0.25.9", "", { "os": "win32", "cpu": "arm64" }, "sha512-mGFrVJHmZiRqmP8xFOc6b84/7xa5y5YvR1x8djzXpJBSv/UsNK6aqec+6JDjConTgvvQefdGhFDAs2DLAds6gQ=="],
+
+    "@esbuild/win32-ia32": ["@esbuild/win32-ia32@0.25.9", "", { "os": "win32", "cpu": "ia32" }, "sha512-b33gLVU2k11nVx1OhX3C8QQP6UHQK4ZtN56oFWvVXvz2VkDoe6fbG8TOgHFxEvqeqohmRnIHe5A1+HADk4OQww=="],
+
+    "@esbuild/win32-x64": ["@esbuild/win32-x64@0.25.9", "", { "os": "win32", "cpu": "x64" }, "sha512-PPOl1mi6lpLNQxnGoyAfschAodRFYXJ+9fs6WHXz7CSWKbOqiMZsubC+BQsVKuul+3vKLuwTHsS2c2y9EoKwxQ=="],
+
+    "@expressive-code/core": ["@expressive-code/core@0.41.3", "", { "dependencies": { "@ctrl/tinycolor": "^4.0.4", "hast-util-select": "^6.0.2", "hast-util-to-html": "^9.0.1", "hast-util-to-text": "^4.0.1", "hastscript": "^9.0.0", "postcss": "^8.4.38", "postcss-nested": "^6.0.1", "unist-util-visit": "^5.0.0", "unist-util-visit-parents": "^6.0.1" } }, "sha512-9qzohqU7O0+JwMEEgQhnBPOw5DtsQRBXhW++5fvEywsuX44vCGGof1SL5OvPElvNgaWZ4pFZAFSlkNOkGyLwSQ=="],
+
+    "@expressive-code/plugin-frames": ["@expressive-code/plugin-frames@0.41.3", "", { "dependencies": { "@expressive-code/core": "^0.41.3" } }, "sha512-rFQtmf/3N2CK3Cq/uERweMTYZnBu+CwxBdHuOftEmfA9iBE7gTVvwpbh82P9ZxkPLvc40UMhYt7uNuAZexycRQ=="],
+
+    "@expressive-code/plugin-shiki": ["@expressive-code/plugin-shiki@0.41.3", "", { "dependencies": { "@expressive-code/core": "^0.41.3", "shiki": "^3.2.2" } }, "sha512-RlTARoopzhFJIOVHLGvuXJ8DCEme/hjV+ZnRJBIxzxsKVpGPW4Oshqg9xGhWTYdHstTsxO663s0cdBLzZj9TQA=="],
+
+    "@expressive-code/plugin-text-markers": ["@expressive-code/plugin-text-markers@0.41.3", "", { "dependencies": { "@expressive-code/core": "^0.41.3" } }, "sha512-SN8tkIzDpA0HLAscEYD2IVrfLiid6qEdE9QLlGVSxO1KEw7qYvjpbNBQjUjMr5/jvTJ7ys6zysU2vLPHE0sb2g=="],
+
+    "@img/sharp-darwin-arm64": ["@img/sharp-darwin-arm64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-darwin-arm64": "1.2.0" }, "os": "darwin", "cpu": "arm64" }, "sha512-ryFMfvxxpQRsgZJqBd4wsttYQbCxsJksrv9Lw/v798JcQ8+w84mBWuXwl+TT0WJ/WrYOLaYpwQXi3sA9nTIaIg=="],
+
+    "@img/sharp-darwin-x64": ["@img/sharp-darwin-x64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-darwin-x64": "1.2.0" }, "os": "darwin", "cpu": "x64" }, "sha512-yHpJYynROAj12TA6qil58hmPmAwxKKC7reUqtGLzsOHfP7/rniNGTL8tjWX6L3CTV4+5P4ypcS7Pp+7OB+8ihA=="],
+
+    "@img/sharp-libvips-darwin-arm64": ["@img/sharp-libvips-darwin-arm64@1.2.0", "", { "os": "darwin", "cpu": "arm64" }, "sha512-sBZmpwmxqwlqG9ueWFXtockhsxefaV6O84BMOrhtg/YqbTaRdqDE7hxraVE3y6gVM4eExmfzW4a8el9ArLeEiQ=="],
+
+    "@img/sharp-libvips-darwin-x64": ["@img/sharp-libvips-darwin-x64@1.2.0", "", { "os": "darwin", "cpu": "x64" }, "sha512-M64XVuL94OgiNHa5/m2YvEQI5q2cl9d/wk0qFTDVXcYzi43lxuiFTftMR1tOnFQovVXNZJ5TURSDK2pNe9Yzqg=="],
+
+    "@img/sharp-libvips-linux-arm": ["@img/sharp-libvips-linux-arm@1.2.0", "", { "os": "linux", "cpu": "arm" }, "sha512-mWd2uWvDtL/nvIzThLq3fr2nnGfyr/XMXlq8ZJ9WMR6PXijHlC3ksp0IpuhK6bougvQrchUAfzRLnbsen0Cqvw=="],
+
+    "@img/sharp-libvips-linux-arm64": ["@img/sharp-libvips-linux-arm64@1.2.0", "", { "os": "linux", "cpu": "arm64" }, "sha512-RXwd0CgG+uPRX5YYrkzKyalt2OJYRiJQ8ED/fi1tq9WQW2jsQIn0tqrlR5l5dr/rjqq6AHAxURhj2DVjyQWSOA=="],
+
+    "@img/sharp-libvips-linux-ppc64": ["@img/sharp-libvips-linux-ppc64@1.2.0", "", { "os": "linux", "cpu": "ppc64" }, "sha512-Xod/7KaDDHkYu2phxxfeEPXfVXFKx70EAFZ0qyUdOjCcxbjqyJOEUpDe6RIyaunGxT34Anf9ue/wuWOqBW2WcQ=="],
+
+    "@img/sharp-libvips-linux-s390x": ["@img/sharp-libvips-linux-s390x@1.2.0", "", { "os": "linux", "cpu": "s390x" }, "sha512-eMKfzDxLGT8mnmPJTNMcjfO33fLiTDsrMlUVcp6b96ETbnJmd4uvZxVJSKPQfS+odwfVaGifhsB07J1LynFehw=="],
+
+    "@img/sharp-libvips-linux-x64": ["@img/sharp-libvips-linux-x64@1.2.0", "", { "os": "linux", "cpu": "x64" }, "sha512-ZW3FPWIc7K1sH9E3nxIGB3y3dZkpJlMnkk7z5tu1nSkBoCgw2nSRTFHI5pB/3CQaJM0pdzMF3paf9ckKMSE9Tg=="],
+
+    "@img/sharp-libvips-linuxmusl-arm64": ["@img/sharp-libvips-linuxmusl-arm64@1.2.0", "", { "os": "linux", "cpu": "arm64" }, "sha512-UG+LqQJbf5VJ8NWJ5Z3tdIe/HXjuIdo4JeVNADXBFuG7z9zjoegpzzGIyV5zQKi4zaJjnAd2+g2nna8TZvuW9Q=="],
+
+    "@img/sharp-libvips-linuxmusl-x64": ["@img/sharp-libvips-linuxmusl-x64@1.2.0", "", { "os": "linux", "cpu": "x64" }, "sha512-SRYOLR7CXPgNze8akZwjoGBoN1ThNZoqpOgfnOxmWsklTGVfJiGJoC/Lod7aNMGA1jSsKWM1+HRX43OP6p9+6Q=="],
+
+    "@img/sharp-linux-arm": ["@img/sharp-linux-arm@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linux-arm": "1.2.0" }, "os": "linux", "cpu": "arm" }, "sha512-oBK9l+h6KBN0i3dC8rYntLiVfW8D8wH+NPNT3O/WBHeW0OQWCjfWksLUaPidsrDKpJgXp3G3/hkmhptAW0I3+A=="],
+
+    "@img/sharp-linux-arm64": ["@img/sharp-linux-arm64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linux-arm64": "1.2.0" }, "os": "linux", "cpu": "arm64" }, "sha512-QdrKe3EvQrqwkDrtuTIjI0bu6YEJHTgEeqdzI3uWJOH6G1O8Nl1iEeVYRGdj1h5I21CqxSvQp1Yv7xeU3ZewbA=="],
+
+    "@img/sharp-linux-ppc64": ["@img/sharp-linux-ppc64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linux-ppc64": "1.2.0" }, "os": "linux", "cpu": "ppc64" }, "sha512-GLtbLQMCNC5nxuImPR2+RgrviwKwVql28FWZIW1zWruy6zLgA5/x2ZXk3mxj58X/tszVF69KK0Is83V8YgWhLA=="],
+
+    "@img/sharp-linux-s390x": ["@img/sharp-linux-s390x@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linux-s390x": "1.2.0" }, "os": "linux", "cpu": "s390x" }, "sha512-3gahT+A6c4cdc2edhsLHmIOXMb17ltffJlxR0aC2VPZfwKoTGZec6u5GrFgdR7ciJSsHT27BD3TIuGcuRT0KmQ=="],
+
+    "@img/sharp-linux-x64": ["@img/sharp-linux-x64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linux-x64": "1.2.0" }, "os": "linux", "cpu": "x64" }, "sha512-8kYso8d806ypnSq3/Ly0QEw90V5ZoHh10yH0HnrzOCr6DKAPI6QVHvwleqMkVQ0m+fc7EH8ah0BB0QPuWY6zJQ=="],
+
+    "@img/sharp-linuxmusl-arm64": ["@img/sharp-linuxmusl-arm64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linuxmusl-arm64": "1.2.0" }, "os": "linux", "cpu": "arm64" }, "sha512-vAjbHDlr4izEiXM1OTggpCcPg9tn4YriK5vAjowJsHwdBIdx0fYRsURkxLG2RLm9gyBq66gwtWI8Gx0/ov+JKQ=="],
+
+    "@img/sharp-linuxmusl-x64": ["@img/sharp-linuxmusl-x64@0.34.3", "", { "optionalDependencies": { "@img/sharp-libvips-linuxmusl-x64": "1.2.0" }, "os": "linux", "cpu": "x64" }, "sha512-gCWUn9547K5bwvOn9l5XGAEjVTTRji4aPTqLzGXHvIr6bIDZKNTA34seMPgM0WmSf+RYBH411VavCejp3PkOeQ=="],
+
+    "@img/sharp-wasm32": ["@img/sharp-wasm32@0.34.3", "", { "dependencies": { "@emnapi/runtime": "^1.4.4" }, "cpu": "none" }, "sha512-+CyRcpagHMGteySaWos8IbnXcHgfDn7pO2fiC2slJxvNq9gDipYBN42/RagzctVRKgxATmfqOSulgZv5e1RdMg=="],
+
+    "@img/sharp-win32-arm64": ["@img/sharp-win32-arm64@0.34.3", "", { "os": "win32", "cpu": "arm64" }, "sha512-MjnHPnbqMXNC2UgeLJtX4XqoVHHlZNd+nPt1kRPmj63wURegwBhZlApELdtxM2OIZDRv/DFtLcNhVbd1z8GYXQ=="],
+
+    "@img/sharp-win32-ia32": ["@img/sharp-win32-ia32@0.34.3", "", { "os": "win32", "cpu": "ia32" }, "sha512-xuCdhH44WxuXgOM714hn4amodJMZl3OEvf0GVTm0BEyMeA2to+8HEdRPShH0SLYptJY1uBw+SCFP9WVQi1Q/cw=="],
+
+    "@img/sharp-win32-x64": ["@img/sharp-win32-x64@0.34.3", "", { "os": "win32", "cpu": "x64" }, "sha512-OWwz05d++TxzLEv4VnsTz5CmZ6mI6S05sfQGEMrNrQcOEERbX46332IvE7pO/EUiw7jUrrS40z/M7kPyjfl04g=="],
+
+    "@jridgewell/sourcemap-codec": ["@jridgewell/sourcemap-codec@1.5.5", "", {}, "sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og=="],
+
+    "@mdx-js/mdx": ["@mdx-js/mdx@3.1.0", "", { "dependencies": { "@types/estree": "^1.0.0", "@types/estree-jsx": "^1.0.0", "@types/hast": "^3.0.0", "@types/mdx": "^2.0.0", "collapse-white-space": "^2.0.0", "devlop": "^1.0.0", "estree-util-is-identifier-name": "^3.0.0", "estree-util-scope": "^1.0.0", "estree-walker": "^3.0.0", "hast-util-to-jsx-runtime": "^2.0.0", "markdown-extensions": "^2.0.0", "recma-build-jsx": "^1.0.0", "recma-jsx": "^1.0.0", "recma-stringify": "^1.0.0", "rehype-recma": "^1.0.0", "remark-mdx": "^3.0.0", "remark-parse": "^11.0.0", "remark-rehype": "^11.0.0", "source-map": "^0.7.0", "unified": "^11.0.0", "unist-util-position-from-estree": "^2.0.0", "unist-util-stringify-position": "^4.0.0", "unist-util-visit": "^5.0.0", "vfile": "^6.0.0" } }, "sha512-/QxEhPAvGwbQmy1Px8F899L5Uc2KZ6JtXwlCgJmjSTBedwOZkByYcBG4GceIGPXRDsmfxhHazuS+hlOShRLeDw=="],
+
+    "@oslojs/encoding": ["@oslojs/encoding@1.1.0", "", {}, "sha512-70wQhgYmndg4GCPxPPxPGevRKqTIJ2Nh4OkiMWmDAVYsTQ+Ta7Sq+rPevXyXGdzr30/qZBnyOalCszoMxlyldQ=="],
+
+    "@pagefind/darwin-arm64": ["@pagefind/darwin-arm64@1.3.0", "", { "os": "darwin", "cpu": "arm64" }, "sha512-365BEGl6ChOsauRjyVpBjXybflXAOvoMROw3TucAROHIcdBvXk9/2AmEvGFU0r75+vdQI4LJdJdpH4Y6Yqaj4A=="],
+
+    "@pagefind/darwin-x64": ["@pagefind/darwin-x64@1.3.0", "", { "os": "darwin", "cpu": "x64" }, "sha512-zlGHA23uuXmS8z3XxEGmbHpWDxXfPZ47QS06tGUq0HDcZjXjXHeLG+cboOy828QIV5FXsm9MjfkP5e4ZNbOkow=="],
+
+    "@pagefind/default-ui": ["@pagefind/default-ui@1.3.0", "", {}, "sha512-CGKT9ccd3+oRK6STXGgfH+m0DbOKayX6QGlq38TfE1ZfUcPc5+ulTuzDbZUnMo+bubsEOIypm4Pl2iEyzZ1cNg=="],
+
+    "@pagefind/linux-arm64": ["@pagefind/linux-arm64@1.3.0", "", { "os": "linux", "cpu": "arm64" }, "sha512-8lsxNAiBRUk72JvetSBXs4WRpYrQrVJXjlRRnOL6UCdBN9Nlsz0t7hWstRk36+JqHpGWOKYiuHLzGYqYAqoOnQ=="],
+
+    "@pagefind/linux-x64": ["@pagefind/linux-x64@1.3.0", "", { "os": "linux", "cpu": "x64" }, "sha512-hAvqdPJv7A20Ucb6FQGE6jhjqy+vZ6pf+s2tFMNtMBG+fzcdc91uTw7aP/1Vo5plD0dAOHwdxfkyw0ugal4kcQ=="],
+
+    "@pagefind/windows-x64": ["@pagefind/windows-x64@1.3.0", "", { "os": "win32", "cpu": "x64" }, "sha512-BR1bIRWOMqkf8IoU576YDhij1Wd/Zf2kX/kCI0b2qzCKC8wcc2GQJaaRMCpzvCCrmliO4vtJ6RITp/AnoYUUmQ=="],
+
+    "@rollup/pluginutils": ["@rollup/pluginutils@5.2.0", "", { "dependencies": { "@types/estree": "^1.0.0", "estree-walker": "^2.0.2", "picomatch": "^4.0.2" }, "peerDependencies": { "rollup": "^1.20.0||^2.0.0||^3.0.0||^4.0.0" } }, "sha512-qWJ2ZTbmumwiLFomfzTyt5Kng4hwPi9rwCYN4SHb6eaRU1KNO4ccxINHr/VhH4GgPlt1XfSTLX2LBTme8ne4Zw=="],
+
+    "@rollup/rollup-android-arm-eabi": ["@rollup/rollup-android-arm-eabi@4.46.2", "", { "os": "android", "cpu": "arm" }, "sha512-Zj3Hl6sN34xJtMv7Anwb5Gu01yujyE/cLBDB2gnHTAHaWS1Z38L7kuSG+oAh0giZMqG060f/YBStXtMH6FvPMA=="],
+
+    "@rollup/rollup-android-arm64": ["@rollup/rollup-android-arm64@4.46.2", "", { "os": "android", "cpu": "arm64" }, "sha512-nTeCWY83kN64oQ5MGz3CgtPx8NSOhC5lWtsjTs+8JAJNLcP3QbLCtDDgUKQc/Ro/frpMq4SHUaHN6AMltcEoLQ=="],
+
+    "@rollup/rollup-darwin-arm64": ["@rollup/rollup-darwin-arm64@4.46.2", "", { "os": "darwin", "cpu": "arm64" }, "sha512-HV7bW2Fb/F5KPdM/9bApunQh68YVDU8sO8BvcW9OngQVN3HHHkw99wFupuUJfGR9pYLLAjcAOA6iO+evsbBaPQ=="],
+
+    "@rollup/rollup-darwin-x64": ["@rollup/rollup-darwin-x64@4.46.2", "", { "os": "darwin", "cpu": "x64" }, "sha512-SSj8TlYV5nJixSsm/y3QXfhspSiLYP11zpfwp6G/YDXctf3Xkdnk4woJIF5VQe0of2OjzTt8EsxnJDCdHd2xMA=="],
+
+    "@rollup/rollup-freebsd-arm64": ["@rollup/rollup-freebsd-arm64@4.46.2", "", { "os": "freebsd", "cpu": "arm64" }, "sha512-ZyrsG4TIT9xnOlLsSSi9w/X29tCbK1yegE49RYm3tu3wF1L/B6LVMqnEWyDB26d9Ecx9zrmXCiPmIabVuLmNSg=="],
+
+    "@rollup/rollup-freebsd-x64": ["@rollup/rollup-freebsd-x64@4.46.2", "", { "os": "freebsd", "cpu": "x64" }, "sha512-pCgHFoOECwVCJ5GFq8+gR8SBKnMO+xe5UEqbemxBpCKYQddRQMgomv1104RnLSg7nNvgKy05sLsY51+OVRyiVw=="],
+
+    "@rollup/rollup-linux-arm-gnueabihf": ["@rollup/rollup-linux-arm-gnueabihf@4.46.2", "", { "os": "linux", "cpu": "arm" }, "sha512-EtP8aquZ0xQg0ETFcxUbU71MZlHaw9MChwrQzatiE8U/bvi5uv/oChExXC4mWhjiqK7azGJBqU0tt5H123SzVA=="],
+
+    "@rollup/rollup-linux-arm-musleabihf": ["@rollup/rollup-linux-arm-musleabihf@4.46.2", "", { "os": "linux", "cpu": "arm" }, "sha512-qO7F7U3u1nfxYRPM8HqFtLd+raev2K137dsV08q/LRKRLEc7RsiDWihUnrINdsWQxPR9jqZ8DIIZ1zJJAm5PjQ=="],
+
+    "@rollup/rollup-linux-arm64-gnu": ["@rollup/rollup-linux-arm64-gnu@4.46.2", "", { "os": "linux", "cpu": "arm64" }, "sha512-3dRaqLfcOXYsfvw5xMrxAk9Lb1f395gkoBYzSFcc/scgRFptRXL9DOaDpMiehf9CO8ZDRJW2z45b6fpU5nwjng=="],
+
+    "@rollup/rollup-linux-arm64-musl": ["@rollup/rollup-linux-arm64-musl@4.46.2", "", { "os": "linux", "cpu": "arm64" }, "sha512-fhHFTutA7SM+IrR6lIfiHskxmpmPTJUXpWIsBXpeEwNgZzZZSg/q4i6FU4J8qOGyJ0TR+wXBwx/L7Ho9z0+uDg=="],
+
+    "@rollup/rollup-linux-loongarch64-gnu": ["@rollup/rollup-linux-loongarch64-gnu@4.46.2", "", { "os": "linux", "cpu": "none" }, "sha512-i7wfGFXu8x4+FRqPymzjD+Hyav8l95UIZ773j7J7zRYc3Xsxy2wIn4x+llpunexXe6laaO72iEjeeGyUFmjKeA=="],
+
+    "@rollup/rollup-linux-ppc64-gnu": ["@rollup/rollup-linux-ppc64-gnu@4.46.2", "", { "os": "linux", "cpu": "ppc64" }, "sha512-B/l0dFcHVUnqcGZWKcWBSV2PF01YUt0Rvlurci5P+neqY/yMKchGU8ullZvIv5e8Y1C6wOn+U03mrDylP5q9Yw=="],
+
+    "@rollup/rollup-linux-riscv64-gnu": ["@rollup/rollup-linux-riscv64-gnu@4.46.2", "", { "os": "linux", "cpu": "none" }, "sha512-32k4ENb5ygtkMwPMucAb8MtV8olkPT03oiTxJbgkJa7lJ7dZMr0GCFJlyvy+K8iq7F/iuOr41ZdUHaOiqyR3iQ=="],
+
+    "@rollup/rollup-linux-riscv64-musl": ["@rollup/rollup-linux-riscv64-musl@4.46.2", "", { "os": "linux", "cpu": "none" }, "sha512-t5B2loThlFEauloaQkZg9gxV05BYeITLvLkWOkRXogP4qHXLkWSbSHKM9S6H1schf/0YGP/qNKtiISlxvfmmZw=="],
+
+    "@rollup/rollup-linux-s390x-gnu": ["@rollup/rollup-linux-s390x-gnu@4.46.2", "", { "os": "linux", "cpu": "s390x" }, "sha512-YKjekwTEKgbB7n17gmODSmJVUIvj8CX7q5442/CK80L8nqOUbMtf8b01QkG3jOqyr1rotrAnW6B/qiHwfcuWQA=="],
+
+    "@rollup/rollup-linux-x64-gnu": ["@rollup/rollup-linux-x64-gnu@4.46.2", "", { "os": "linux", "cpu": "x64" }, "sha512-Jj5a9RUoe5ra+MEyERkDKLwTXVu6s3aACP51nkfnK9wJTraCC8IMe3snOfALkrjTYd2G1ViE1hICj0fZ7ALBPA=="],
+
+    "@rollup/rollup-linux-x64-musl": ["@rollup/rollup-linux-x64-musl@4.46.2", "", { "os": "linux", "cpu": "x64" }, "sha512-7kX69DIrBeD7yNp4A5b81izs8BqoZkCIaxQaOpumcJ1S/kmqNFjPhDu1LHeVXv0SexfHQv5cqHsxLOjETuqDuA=="],
+
+    "@rollup/rollup-win32-arm64-msvc": ["@rollup/rollup-win32-arm64-msvc@4.46.2", "", { "os": "win32", "cpu": "arm64" }, "sha512-wiJWMIpeaak/jsbaq2HMh/rzZxHVW1rU6coyeNNpMwk5isiPjSTx0a4YLSlYDwBH/WBvLz+EtsNqQScZTLJy3g=="],
+
+    "@rollup/rollup-win32-ia32-msvc": ["@rollup/rollup-win32-ia32-msvc@4.46.2", "", { "os": "win32", "cpu": "ia32" }, "sha512-gBgaUDESVzMgWZhcyjfs9QFK16D8K6QZpwAaVNJxYDLHWayOta4ZMjGm/vsAEy3hvlS2GosVFlBlP9/Wb85DqQ=="],
+
+    "@rollup/rollup-win32-x64-msvc": ["@rollup/rollup-win32-x64-msvc@4.46.2", "", { "os": "win32", "cpu": "x64" }, "sha512-CvUo2ixeIQGtF6WvuB87XWqPQkoFAFqW+HUo/WzHwuHDvIwZCtjdWXoYCcr06iKGydiqTclC4jU/TNObC/xKZg=="],
+
+    "@shikijs/core": ["@shikijs/core@3.9.2", "", { "dependencies": { "@shikijs/types": "3.9.2", "@shikijs/vscode-textmate": "^10.0.2", "@types/hast": "^3.0.4", "hast-util-to-html": "^9.0.5" } }, "sha512-3q/mzmw09B2B6PgFNeiaN8pkNOixWS726IHmJEpjDAcneDPMQmUg2cweT9cWXY4XcyQS3i6mOOUgQz9RRUP6HA=="],
+
+    "@shikijs/engine-javascript": ["@shikijs/engine-javascript@3.9.2", "", { "dependencies": { "@shikijs/types": "3.9.2", "@shikijs/vscode-textmate": "^10.0.2", "oniguruma-to-es": "^4.3.3" } }, "sha512-kUTRVKPsB/28H5Ko6qEsyudBiWEDLst+Sfi+hwr59E0GLHV0h8RfgbQU7fdN5Lt9A8R1ulRiZyTvAizkROjwDA=="],
+
+    "@shikijs/engine-oniguruma": ["@shikijs/engine-oniguruma@3.9.2", "", { "dependencies": { "@shikijs/types": "3.9.2", "@shikijs/vscode-textmate": "^10.0.2" } }, "sha512-Vn/w5oyQ6TUgTVDIC/BrpXwIlfK6V6kGWDVVz2eRkF2v13YoENUvaNwxMsQU/t6oCuZKzqp9vqtEtEzKl9VegA=="],
+
+    "@shikijs/langs": ["@shikijs/langs@3.9.2", "", { "dependencies": { "@shikijs/types": "3.9.2" } }, "sha512-X1Q6wRRQXY7HqAuX3I8WjMscjeGjqXCg/Sve7J2GWFORXkSrXud23UECqTBIdCSNKJioFtmUGJQNKtlMMZMn0w=="],
+
+    "@shikijs/themes": ["@shikijs/themes@3.9.2", "", { "dependencies": { "@shikijs/types": "3.9.2" } }, "sha512-6z5lBPBMRfLyyEsgf6uJDHPa6NAGVzFJqH4EAZ+03+7sedYir2yJBRu2uPZOKmj43GyhVHWHvyduLDAwJQfDjA=="],
+
+    "@shikijs/types": ["@shikijs/types@3.9.2", "", { "dependencies": { "@shikijs/vscode-textmate": "^10.0.2", "@types/hast": "^3.0.4" } }, "sha512-/M5L0Uc2ljyn2jKvj4Yiah7ow/W+DJSglVafvWAJ/b8AZDeeRAdMu3c2riDzB7N42VD+jSnWxeP9AKtd4TfYVw=="],
+
+    "@shikijs/vscode-textmate": ["@shikijs/vscode-textmate@10.0.2", "", {}, "sha512-83yeghZ2xxin3Nj8z1NMd/NCuca+gsYXswywDy5bHvwlWL8tpTQmzGeUuHd9FC3E/SBEMvzJRwWEOz5gGes9Qg=="],
+
+    "@swc/helpers": ["@swc/helpers@0.5.17", "", { "dependencies": { "tslib": "^2.8.0" } }, "sha512-5IKx/Y13RsYd+sauPb2x+U/xZikHjolzfuDgTAl/Tdf3Q8rslRvC19NKDLgAJQ6wsqADk10ntlv08nPFw/gO/A=="],
+
+    "@types/braces": ["@types/braces@3.0.5", "", {}, "sha512-SQFof9H+LXeWNz8wDe7oN5zu7ket0qwMu5vZubW4GCJ8Kkeh6nBWUz87+KTz/G3Kqsrp0j/W253XJb3KMEeg3w=="],
+
+    "@types/chroma-js": ["@types/chroma-js@3.1.1", "", {}, "sha512-SFCr4edNkZ1bGaLzGz7rgR1bRzVX4MmMxwsIa3/Bh6ose8v+hRpneoizHv0KChdjxaXyjRtaMq7sCuZSzPomQA=="],
+
+    "@types/d3": ["@types/d3@7.4.3", "", { "dependencies": { "@types/d3-array": "*", "@types/d3-axis": "*", "@types/d3-brush": "*", "@types/d3-chord": "*", "@types/d3-color": "*", "@types/d3-contour": "*", "@types/d3-delaunay": "*", "@types/d3-dispatch": "*", "@types/d3-drag": "*", "@types/d3-dsv": "*", "@types/d3-ease": "*", "@types/d3-fetch": "*", "@types/d3-force": "*", "@types/d3-format": "*", "@types/d3-geo": "*", "@types/d3-hierarchy": "*", "@types/d3-interpolate": "*", "@types/d3-path": "*", "@types/d3-polygon": "*", "@types/d3-quadtree": "*", "@types/d3-random": "*", "@types/d3-scale": "*", "@types/d3-scale-chromatic": "*", "@types/d3-selection": "*", "@types/d3-shape": "*", "@types/d3-time": "*", "@types/d3-time-format": "*", "@types/d3-timer": "*", "@types/d3-transition": "*", "@types/d3-zoom": "*" } }, "sha512-lZXZ9ckh5R8uiFVt8ogUNf+pIrK4EsWrx2Np75WvF/eTpJ0FMHNhjXk8CKEx/+gpHbNQyJWehbFaTvqmHWB3ww=="],
+
+    "@types/d3-array": ["@types/d3-array@3.2.1", "", {}, "sha512-Y2Jn2idRrLzUfAKV2LyRImR+y4oa2AntrgID95SHJxuMUrkNXmanDSed71sRNZysveJVt1hLLemQZIady0FpEg=="],
+
+    "@types/d3-axis": ["@types/d3-axis@3.0.6", "", { "dependencies": { "@types/d3-selection": "*" } }, "sha512-pYeijfZuBd87T0hGn0FO1vQ/cgLk6E1ALJjfkC0oJ8cbwkZl3TpgS8bVBLZN+2jjGgg38epgxb2zmoGtSfvgMw=="],
+
+    "@types/d3-brush": ["@types/d3-brush@3.0.6", "", { "dependencies": { "@types/d3-selection": "*" } }, "sha512-nH60IZNNxEcrh6L1ZSMNA28rj27ut/2ZmI3r96Zd+1jrZD++zD3LsMIjWlvg4AYrHn/Pqz4CF3veCxGjtbqt7A=="],
+
+    "@types/d3-chord": ["@types/d3-chord@3.0.6", "", {}, "sha512-LFYWWd8nwfwEmTZG9PfQxd17HbNPksHBiJHaKuY1XeqscXacsS2tyoo6OdRsjf+NQYeB6XrNL3a25E3gH69lcg=="],
+
+    "@types/d3-color": ["@types/d3-color@3.1.3", "", {}, "sha512-iO90scth9WAbmgv7ogoq57O9YpKmFBbmoEoCHDB2xMBY0+/KVrqAaCDyCE16dUspeOvIxFFRI+0sEtqDqy2b4A=="],
+
+    "@types/d3-contour": ["@types/d3-contour@3.0.6", "", { "dependencies": { "@types/d3-array": "*", "@types/geojson": "*" } }, "sha512-BjzLgXGnCWjUSYGfH1cpdo41/hgdWETu4YxpezoztawmqsvCeep+8QGfiY6YbDvfgHz/DkjeIkkZVJavB4a3rg=="],
+
+    "@types/d3-delaunay": ["@types/d3-delaunay@6.0.4", "", {}, "sha512-ZMaSKu4THYCU6sV64Lhg6qjf1orxBthaC161plr5KuPHo3CNm8DTHiLw/5Eq2b6TsNP0W0iJrUOFscY6Q450Hw=="],
+
+    "@types/d3-dispatch": ["@types/d3-dispatch@3.0.7", "", {}, "sha512-5o9OIAdKkhN1QItV2oqaE5KMIiXAvDWBDPrD85e58Qlz1c1kI/J0NcqbEG88CoTwJrYe7ntUCVfeUl2UJKbWgA=="],
+
+    "@types/d3-drag": ["@types/d3-drag@3.0.7", "", { "dependencies": { "@types/d3-selection": "*" } }, "sha512-HE3jVKlzU9AaMazNufooRJ5ZpWmLIoc90A37WU2JMmeq28w1FQqCZswHZ3xR+SuxYftzHq6WU6KJHvqxKzTxxQ=="],
+
+    "@types/d3-dsv": ["@types/d3-dsv@3.0.7", "", {}, "sha512-n6QBF9/+XASqcKK6waudgL0pf/S5XHPPI8APyMLLUHd8NqouBGLsU8MgtO7NINGtPBtk9Kko/W4ea0oAspwh9g=="],
+
+    "@types/d3-ease": ["@types/d3-ease@3.0.2", "", {}, "sha512-NcV1JjO5oDzoK26oMzbILE6HW7uVXOHLQvHshBUW4UMdZGfiY6v5BeQwh9a9tCzv+CeefZQHJt5SRgK154RtiA=="],
+
+    "@types/d3-fetch": ["@types/d3-fetch@3.0.7", "", { "dependencies": { "@types/d3-dsv": "*" } }, "sha512-fTAfNmxSb9SOWNB9IoG5c8Hg6R+AzUHDRlsXsDZsNp6sxAEOP0tkP3gKkNSO/qmHPoBFTxNrjDprVHDQDvo5aA=="],
+
+    "@types/d3-force": ["@types/d3-force@3.0.10", "", {}, "sha512-ZYeSaCF3p73RdOKcjj+swRlZfnYpK1EbaDiYICEEp5Q6sUiqFaFQ9qgoshp5CzIyyb/yD09kD9o2zEltCexlgw=="],
+
+    "@types/d3-format": ["@types/d3-format@3.0.4", "", {}, "sha512-fALi2aI6shfg7vM5KiR1wNJnZ7r6UuggVqtDA+xiEdPZQwy/trcQaHnwShLuLdta2rTymCNpxYTiMZX/e09F4g=="],
+
+    "@types/d3-geo": ["@types/d3-geo@3.1.0", "", { "dependencies": { "@types/geojson": "*" } }, "sha512-856sckF0oP/diXtS4jNsiQw/UuK5fQG8l/a9VVLeSouf1/PPbBE1i1W852zVwKwYCBkFJJB7nCFTbk6UMEXBOQ=="],
+
+    "@types/d3-hierarchy": ["@types/d3-hierarchy@3.1.7", "", {}, "sha512-tJFtNoYBtRtkNysX1Xq4sxtjK8YgoWUNpIiUee0/jHGRwqvzYxkq0hGVbbOGSz+JgFxxRu4K8nb3YpG3CMARtg=="],
+
+    "@types/d3-interpolate": ["@types/d3-interpolate@3.0.4", "", { "dependencies": { "@types/d3-color": "*" } }, "sha512-mgLPETlrpVV1YRJIglr4Ez47g7Yxjl1lj7YKsiMCb27VJH9W8NVM6Bb9d8kkpG/uAQS5AmbA48q2IAolKKo1MA=="],
+
+    "@types/d3-path": ["@types/d3-path@3.1.1", "", {}, "sha512-VMZBYyQvbGmWyWVea0EHs/BwLgxc+MKi1zLDCONksozI4YJMcTt8ZEuIR4Sb1MMTE8MMW49v0IwI5+b7RmfWlg=="],
+
+    "@types/d3-polygon": ["@types/d3-polygon@3.0.2", "", {}, "sha512-ZuWOtMaHCkN9xoeEMr1ubW2nGWsp4nIql+OPQRstu4ypeZ+zk3YKqQT0CXVe/PYqrKpZAi+J9mTs05TKwjXSRA=="],
+
+    "@types/d3-quadtree": ["@types/d3-quadtree@3.0.6", "", {}, "sha512-oUzyO1/Zm6rsxKRHA1vH0NEDG58HrT5icx/azi9MF1TWdtttWl0UIUsjEQBBh+SIkrpd21ZjEv7ptxWys1ncsg=="],
+
+    "@types/d3-random": ["@types/d3-random@3.0.3", "", {}, "sha512-Imagg1vJ3y76Y2ea0871wpabqp613+8/r0mCLEBfdtqC7xMSfj9idOnmBYyMoULfHePJyxMAw3nWhJxzc+LFwQ=="],
+
+    "@types/d3-scale": ["@types/d3-scale@4.0.9", "", { "dependencies": { "@types/d3-time": "*" } }, "sha512-dLmtwB8zkAeO/juAMfnV+sItKjlsw2lKdZVVy6LRr0cBmegxSABiLEpGVmSJJ8O08i4+sGR6qQtb6WtuwJdvVw=="],
+
+    "@types/d3-scale-chromatic": ["@types/d3-scale-chromatic@3.1.0", "", {}, "sha512-iWMJgwkK7yTRmWqRB5plb1kadXyQ5Sj8V/zYlFGMUBbIPKQScw+Dku9cAAMgJG+z5GYDoMjWGLVOvjghDEFnKQ=="],
+
+    "@types/d3-selection": ["@types/d3-selection@3.0.11", "", {}, "sha512-bhAXu23DJWsrI45xafYpkQ4NtcKMwWnAC/vKrd2l+nxMFuvOT3XMYTIj2opv8vq8AO5Yh7Qac/nSeP/3zjTK0w=="],
+
+    "@types/d3-shape": ["@types/d3-shape@3.1.7", "", { "dependencies": { "@types/d3-path": "*" } }, "sha512-VLvUQ33C+3J+8p+Daf+nYSOsjB4GXp19/S/aGo60m9h1v6XaxjiT82lKVWJCfzhtuZ3yD7i/TPeC/fuKLLOSmg=="],
+
+    "@types/d3-time": ["@types/d3-time@3.0.4", "", {}, "sha512-yuzZug1nkAAaBlBBikKZTgzCeA+k1uy4ZFwWANOfKw5z5LRhV0gNA7gNkKm7HoK+HRN0wX3EkxGk0fpbWhmB7g=="],
+
+    "@types/d3-time-format": ["@types/d3-time-format@4.0.3", "", {}, "sha512-5xg9rC+wWL8kdDj153qZcsJ0FWiFt0J5RB6LYUNZjwSnesfblqrI/bJ1wBdJ8OQfncgbJG5+2F+qfqnqyzYxyg=="],
+
+    "@types/d3-timer": ["@types/d3-timer@3.0.2", "", {}, "sha512-Ps3T8E8dZDam6fUyNiMkekK3XUsaUEik+idO9/YjPtfj2qruF8tFBXS7XhtE4iIXBLxhmLjP3SXpLhVf21I9Lw=="],
+
+    "@types/d3-transition": ["@types/d3-transition@3.0.9", "", { "dependencies": { "@types/d3-selection": "*" } }, "sha512-uZS5shfxzO3rGlu0cC3bjmMFKsXv+SmZZcgp0KD22ts4uGXp5EVYGzu/0YdwZeKmddhcAccYtREJKkPfXkZuCg=="],
+
+    "@types/d3-zoom": ["@types/d3-zoom@3.0.8", "", { "dependencies": { "@types/d3-interpolate": "*", "@types/d3-selection": "*" } }, "sha512-iqMC4/YlFCSlO8+2Ii1GGGliCAY4XdeG748w5vQUbevlbDu0zSjH/+jojorQVBK/se0j6DUFNPBGSqD3YWYnDw=="],
+
+    "@types/debug": ["@types/debug@4.1.12", "", { "dependencies": { "@types/ms": "*" } }, "sha512-vIChWdVG3LG1SMxEvI/AK+FWJthlrqlTu7fbrlywTkkaONwk/UAGaULXRlf8vkzFBLVm0zkMdCquhL5aOjhXPQ=="],
+
+    "@types/estree": ["@types/estree@1.0.8", "", {}, "sha512-dWHzHa2WqEXI/O1E9OjrocMTKJl2mSrEolh1Iomrv6U+JuNwaHXsXx9bLu5gG7BUWFIN0skIQJQ/L1rIex4X6w=="],
+
+    "@types/estree-jsx": ["@types/estree-jsx@1.0.5", "", { "dependencies": { "@types/estree": "*" } }, "sha512-52CcUVNFyfb1A2ALocQw/Dd1BQFNmSdkuC3BkZ6iqhdMfQz7JWOFRuJFloOzjk+6WijU56m9oKXFAXc7o3Towg=="],
+
+    "@types/fontkit": ["@types/fontkit@2.0.8", "", { "dependencies": { "@types/node": "*" } }, "sha512-wN+8bYxIpJf+5oZdrdtaX04qUuWHcKxcDEgRS9Qm9ZClSHjzEn13SxUC+5eRM+4yXIeTYk8mTzLAWGF64847ew=="],
+
+    "@types/geojson": ["@types/geojson@7946.0.16", "", {}, "sha512-6C8nqWur3j98U6+lXDfTUWIfgvZU+EumvpHKcYjujKH7woYyLj2sUmff0tRhrqM7BohUw7Pz3ZB1jj2gW9Fvmg=="],
+
+    "@types/hast": ["@types/hast@3.0.4", "", { "dependencies": { "@types/unist": "*" } }, "sha512-WPs+bbQw5aCj+x6laNGWLH3wviHtoCv/P3+otBhbOhJgG8qtpdAMlTCxLtsTWA7LH1Oh/bFCHsBn0TPS5m30EQ=="],
+
+    "@types/js-yaml": ["@types/js-yaml@4.0.9", "", {}, "sha512-k4MGaQl5TGo/iipqb2UDG2UwjXziSWkh0uysQelTlJpX1qGlpUZYm8PnO4DxG1qBomtJUdYJ6qR6xdIah10JLg=="],
+
+    "@types/mdast": ["@types/mdast@4.0.4", "", { "dependencies": { "@types/unist": "*" } }, "sha512-kGaNbPh1k7AFzgpud/gMdvIm5xuECykRR+JnWKQno9TAXVa6WIVCGTPvYGekIDL4uwCZQSYbUxNBSb1aUo79oA=="],
+
+    "@types/mdx": ["@types/mdx@2.0.13", "", {}, "sha512-+OWZQfAYyio6YkJb3HLxDrvnx6SWWDbC0zVPfBRzUk0/nqoDyf6dNxQi3eArPe8rJ473nobTMQ/8Zk+LxJ+Yuw=="],
+
+    "@types/micromatch": ["@types/micromatch@4.0.9", "", { "dependencies": { "@types/braces": "*" } }, "sha512-7V+8ncr22h4UoYRLnLXSpTxjQrNUXtWHGeMPRJt1nULXI57G9bIcpyrHlmrQ7QK24EyyuXvYcSSWAM8GA9nqCg=="],
+
+    "@types/ms": ["@types/ms@2.1.0", "", {}, "sha512-GsCCIZDE/p3i96vtEqx+7dBUGXrc7zeSK3wwPHIaRThS+9OhWIXRqzs4d6k1SVU8g91DrNRWxWUGhp5KXQb2VA=="],
+
+    "@types/nlcst": ["@types/nlcst@2.0.3", "", { "dependencies": { "@types/unist": "*" } }, "sha512-vSYNSDe6Ix3q+6Z7ri9lyWqgGhJTmzRjZRqyq15N0Z/1/UnVsno9G/N40NBijoYx2seFDIl0+B2mgAb9mezUCA=="],
+
+    "@types/node": ["@types/node@24.2.1", "", { "dependencies": { "undici-types": "~7.10.0" } }, "sha512-DRh5K+ka5eJic8CjH7td8QpYEV6Zo10gfRkjHCO3weqZHWDtAaSTFtl4+VMqOJ4N5jcuhZ9/l+yy8rVgw7BQeQ=="],
+
+    "@types/picomatch": ["@types/picomatch@3.0.2", "", {}, "sha512-n0i8TD3UDB7paoMMxA3Y65vUncFJXjcUf7lQY7YyKGl6031FNjfsLs6pdLFCy2GNFxItPJG8GvvpbZc2skH7WA=="],
+
+    "@types/sax": ["@types/sax@1.2.7", "", { "dependencies": { "@types/node": "*" } }, "sha512-rO73L89PJxeYM3s3pPPjiPgVVcymqU490g0YO5n5By0k2Erzj6tay/4lr1CHAAU4JyOWd1rpQ8bCf6cZfHU96A=="],
+
+    "@types/unist": ["@types/unist@3.0.3", "", {}, "sha512-ko/gIFJRv177XgZsZcBwnqJN5x/Gien8qNOn0D5bQU/zAzVf9Zt3BlcUiLqhV9y4ARk0GbT3tnUiPNgnTXzc/Q=="],
+
+    "@ungap/structured-clone": ["@ungap/structured-clone@1.3.0", "", {}, "sha512-WmoN8qaIAo7WTYWbAZuG8PYEhn5fkz7dZrqTBZ7dtt//lL2Gwms1IcnQ5yHqjDfX8Ft5j4YzDM23f87zBfDe9g=="],
+
+    "acorn": ["acorn@8.15.0", "", { "bin": "bin/acorn" }, "sha512-NZyJarBfL7nWwIq+FDL6Zp/yHEhePMNnnJ0y3qfieCrmNvYct8uvtiV41UvlSe6apAfk0fY1FbWx+NwfmpvtTg=="],
+
+    "acorn-jsx": ["acorn-jsx@5.3.2", "", { "peerDependencies": { "acorn": "^6.0.0 || ^7.0.0 || ^8.0.0" } }, "sha512-rq9s+JNhf0IChjtDXxllJ7g41oZk5SlXtp0LHwyA5cejwn7vKmKp4pPri6YEePv2PU65sAsegbXtIinmDFDXgQ=="],
+
+    "ansi-align": ["ansi-align@3.0.1", "", { "dependencies": { "string-width": "^4.1.0" } }, "sha512-IOfwwBF5iczOjp/WeY4YxyjqAFMQoZufdQWDd19SEExbVLNXqvpzSJ/M7Za4/sCPmQ0+GRquoA7bGcINcxew6w=="],
+
+    "ansi-regex": ["ansi-regex@6.1.0", "", {}, "sha512-7HSX4QQb4CspciLpVFwyRe79O3xsIZDDLER21kERQ71oaPodF8jL725AgJMFAYbooIqolJoRLuM81SpeUkpkvA=="],
+
+    "ansi-styles": ["ansi-styles@6.2.1", "", {}, "sha512-bN798gFfQX+viw3R7yrGWRqnrN2oRkEkUjjl4JNn4E8GxxbjtG3FbrEIIY3l8/hrwUwIeCZvi4QuOTP4MErVug=="],
+
+    "anymatch": ["anymatch@3.1.3", "", { "dependencies": { "normalize-path": "^3.0.0", "picomatch": "^2.0.4" } }, "sha512-KMReFUr0B4t+D+OBkjR3KYqvocp2XaSzO55UcB6mgQMd3KbcE+mWTyvVV7D/zsdEbNnV6acZUutkiHQXvTr1Rw=="],
+
+    "arg": ["arg@5.0.2", "", {}, "sha512-PYjyFOLKQ9y57JvQ6QLo8dAgNqswh8M1RMJYdQduT6xbWSgK36P/Z/v+p888pM69jMMfS8Xd8F6I1kQ/I9HUGg=="],
+
+    "argparse": ["argparse@2.0.1", "", {}, "sha512-8+9WqebbFzpX9OR+Wa6O29asIogeRMzcGtAINdpMHHyAg10f05aSFVBbcEqGf/PXw1EjAZ+q2/bEBg3DvurK3Q=="],
+
+    "aria-query": ["aria-query@5.3.2", "", {}, "sha512-COROpnaoap1E2F000S62r6A60uHZnmlvomhfyT2DlTcrY1OrBKn2UhH7qn5wTC9zMvD0AY7csdPSNwKP+7WiQw=="],
+
+    "array-iterate": ["array-iterate@2.0.1", "", {}, "sha512-I1jXZMjAgCMmxT4qxXfPXa6SthSoE8h6gkSI9BGGNv8mP8G/v0blc+qFnZu6K42vTOiuME596QaLO0TP3Lk0xg=="],
+
+    "ast-types": ["ast-types@0.16.1", "", { "dependencies": { "tslib": "^2.0.1" } }, "sha512-6t10qk83GOG8p0vKmaCr8eiilZwO171AvbROMtvvNiwrTly62t+7XkA8RdIIVbpMhCASAsxgAzdRSwh6nw/5Dg=="],
+
+    "astring": ["astring@1.9.0", "", { "bin": "bin/astring" }, "sha512-LElXdjswlqjWrPpJFg1Fx4wpkOCxj1TDHlSV4PlaRxHGWko024xICaa97ZkMfs6DRKlCguiAI+rbXv5GWwXIkg=="],
+
+    "astro": ["astro@5.13.0", "", { "dependencies": { "@astrojs/compiler": "^2.12.2", "@astrojs/internal-helpers": "0.7.1", "@astrojs/markdown-remark": "6.3.5", "@astrojs/telemetry": "3.3.0", "@capsizecss/unpack": "^2.4.0", "@oslojs/encoding": "^1.1.0", "@rollup/pluginutils": "^5.1.4", "acorn": "^8.14.1", "aria-query": "^5.3.2", "axobject-query": "^4.1.0", "boxen": "8.0.1", "ci-info": "^4.2.0", "clsx": "^2.1.1", "common-ancestor-path": "^1.0.1", "cookie": "^1.0.2", "cssesc": "^3.0.0", "debug": "^4.4.0", "deterministic-object-hash": "^2.0.2", "devalue": "^5.1.1", "diff": "^5.2.0", "dlv": "^1.1.3", "dset": "^3.1.4", "es-module-lexer": "^1.6.0", "esbuild": "^0.25.0", "estree-walker": "^3.0.3", "flattie": "^1.1.1", "fontace": "~0.3.0", "github-slugger": "^2.0.0", "html-escaper": "3.0.3", "http-cache-semantics": "^4.1.1", "import-meta-resolve": "^4.1.0", "js-yaml": "^4.1.0", "kleur": "^4.1.5", "magic-string": "^0.30.17", "magicast": "^0.3.5", "mrmime": "^2.0.1", "neotraverse": "^0.6.18", "p-limit": "^6.2.0", "p-queue": "^8.1.0", "package-manager-detector": "^1.1.0", "picomatch": "^4.0.2", "prompts": "^2.4.2", "rehype": "^13.0.2", "semver": "^7.7.1", "shiki": "^3.2.1", "smol-toml": "^1.3.4", "tinyexec": "^0.3.2", "tinyglobby": "^0.2.12", "tsconfck": "^3.1.5", "ultrahtml": "^1.6.0", "unifont": "~0.5.0", "unist-util-visit": "^5.0.0", "unstorage": "^1.15.0", "vfile": "^6.0.3", "vite": "^6.3.4", "vitefu": "^1.0.6", "xxhash-wasm": "^1.1.0", "yargs-parser": "^21.1.1", "yocto-spinner": "^0.2.1", "zod": "^3.24.4", "zod-to-json-schema": "^3.24.5", "zod-to-ts": "^1.2.0" }, "optionalDependencies": { "sharp": "^0.33.3" }, "bin": "astro.js" }, "sha512-kWahyvrrxUtgxFRRWSH5X0DESvgg4ZZ0fk6tU7blVZRgmj4PY79nzfaXFT+N+Ac2vWXX7eYUPYs1kLLk5IjBfQ=="],
+
+    "astro-expressive-code": ["astro-expressive-code@0.41.3", "", { "dependencies": { "rehype-expressive-code": "^0.41.3" }, "peerDependencies": { "astro": "^4.0.0-beta || ^5.0.0-beta || ^3.3.0" } }, "sha512-u+zHMqo/QNLE2eqYRCrK3+XMlKakv33Bzuz+56V1gs8H0y6TZ0hIi3VNbIxeTn51NLn+mJfUV/A0kMNfE4rANw=="],
+
+    "astro-integration-kit": ["astro-integration-kit@0.18.0", "", { "dependencies": { "pathe": "^1.1.2", "recast": "^0.23.7" }, "peerDependencies": { "astro": "^4.12.0 || ^5.0.0" } }, "sha512-Z0QW5IQjosuKQDEGYYkvUX6EhEtrmE4/oViqWz23QveV8U7AuyFsTdg00WRNPevWZl/5a4lLUeDpv4bCRynRRg=="],
+
+    "axobject-query": ["axobject-query@4.1.0", "", {}, "sha512-qIj0G9wZbMGNLjLmg1PT6v2mE9AH2zlnADJD/2tC6E00hgmhUOfEB6greHPAfLRSufHqROIUTkw6E+M3lH0PTQ=="],
+
+    "bail": ["bail@2.0.2", "", {}, "sha512-0xO6mYd7JB2YesxDKplafRpsiOzPt9V02ddPCLbY1xYGPOX24NTyN50qnUxgCPcSoYMhKpAuBTjQoRZCAkUDRw=="],
+
+    "base-64": ["base-64@1.0.0", "", {}, "sha512-kwDPIFCGx0NZHog36dj+tHiwP4QMzsZ3AgMViUBKI0+V5n4U0ufTCUMhnQ04diaRI8EX/QcPfql7zlhZ7j4zgg=="],
+
+    "base64-js": ["base64-js@1.5.1", "", {}, "sha512-AKpaYlHn8t4SVbOHCy+b5+KKgvR4vrsD8vbvrbiQJps7fKDTkjkDry6ji0rUJjC0kzbNePLwzxq8iypo41qeWA=="],
+
+    "bcp-47": ["bcp-47@2.1.0", "", { "dependencies": { "is-alphabetical": "^2.0.0", "is-alphanumerical": "^2.0.0", "is-decimal": "^2.0.0" } }, "sha512-9IIS3UPrvIa1Ej+lVDdDwO7zLehjqsaByECw0bu2RRGP73jALm6FYbzI5gWbgHLvNdkvfXB5YrSbocZdOS0c0w=="],
+
+    "bcp-47-match": ["bcp-47-match@2.0.3", "", {}, "sha512-JtTezzbAibu8G0R9op9zb3vcWZd9JF6M0xOYGPn0fNCd7wOpRB1mU2mH9T8gaBGbAAyIIVgB2G7xG0GP98zMAQ=="],
+
+    "blob-to-buffer": ["blob-to-buffer@1.2.9", "", {}, "sha512-BF033y5fN6OCofD3vgHmNtwZWRcq9NLyyxyILx9hfMy1sXYy4ojFl765hJ2lP0YaN2fuxPaLO2Vzzoxy0FLFFA=="],
+
+    "boolbase": ["boolbase@1.0.0", "", {}, "sha512-JZOSA7Mo9sNGB8+UjSgzdLtokWAky1zbztM3WRLCbZ70/3cTANmQmOdR7y2g+J0e2WXywy1yS468tY+IruqEww=="],
+
+    "boxen": ["boxen@8.0.1", "", { "dependencies": { "ansi-align": "^3.0.1", "camelcase": "^8.0.0", "chalk": "^5.3.0", "cli-boxes": "^3.0.0", "string-width": "^7.2.0", "type-fest": "^4.21.0", "widest-line": "^5.0.0", "wrap-ansi": "^9.0.0" } }, "sha512-F3PH5k5juxom4xktynS7MoFY+NUWH5LC4CnH11YB8NPew+HLpmBLCybSAEyb2F+4pRXhuhWqFesoQd6DAyc2hw=="],
+
+    "braces": ["braces@3.0.3", "", { "dependencies": { "fill-range": "^7.1.1" } }, "sha512-yQbXgO/OSZVD2IsiLlro+7Hf6Q18EJrKSEsdoMzKePKXct3gvD8oLcOQdIzGupr5Fj+EDe8gO/lxc1BzfMpxvA=="],
+
+    "brotli": ["brotli@1.3.3", "", { "dependencies": { "base64-js": "^1.1.2" } }, "sha512-oTKjJdShmDuGW94SyyaoQvAjf30dZaHnjJ8uAF+u2/vGJkJbJPJAT1gDiOJP5v1Zb6f9KEyW/1HpuaWIXtGHPg=="],
+
+    "camelcase": ["camelcase@8.0.0", "", {}, "sha512-8WB3Jcas3swSvjIeA2yvCJ+Miyz5l1ZmB6HFb9R1317dt9LCQoswg/BGrmAmkWVEszSrrg4RwmO46qIm2OEnSA=="],
+
+    "ccount": ["ccount@2.0.1", "", {}, "sha512-eyrF0jiFpY+3drT6383f1qhkbGsLSifNAjA61IUjZjmLCWjItY6LB9ft9YhoDgwfmclB2zhu51Lc7+95b8NRAg=="],
+
+    "chalk": ["chalk@5.5.0", "", {}, "sha512-1tm8DTaJhPBG3bIkVeZt1iZM9GfSX2lzOeDVZH9R9ffRHpmHvxZ/QhgQH/aDTkswQVt+YHdXAdS/In/30OjCbg=="],
+
+    "character-entities": ["character-entities@2.0.2", "", {}, "sha512-shx7oQ0Awen/BRIdkjkvz54PnEEI/EjwXDSIZp86/KKdbafHh1Df/RYGBhn4hbe2+uKC9FnT5UCEdyPz3ai9hQ=="],
+
+    "character-entities-html4": ["character-entities-html4@2.1.0", "", {}, "sha512-1v7fgQRj6hnSwFpq1Eu0ynr/CDEw0rXo2B61qXrLNdHZmPKgb7fqS1a2JwF0rISo9q77jDI8VMEHoApn8qDoZA=="],
+
+    "character-entities-legacy": ["character-entities-legacy@3.0.0", "", {}, "sha512-RpPp0asT/6ufRm//AJVwpViZbGM/MkjQFxJccQRHmISF/22NBtsHqAWmL+/pmkPWoIUJdWyeVleTl1wydHATVQ=="],
+
+    "character-reference-invalid": ["character-reference-invalid@2.0.1", "", {}, "sha512-iBZ4F4wRbyORVsu0jPV7gXkOsGYjGHPmAyv+HiHG8gi5PtC9KI2j1+v8/tlibRvjoWX027ypmG/n0HtO5t7unw=="],
+
+    "chokidar": ["chokidar@4.0.3", "", { "dependencies": { "readdirp": "^4.0.1" } }, "sha512-Qgzu8kfBvo+cA4962jnP1KkS6Dop5NS6g7R5LFYJr4b8Ub94PPQXUksCw9PvXoeXPRRddRNC5C1JQUR2SMGtnA=="],
+
+    "chroma-js": ["chroma-js@3.1.2", "", {}, "sha512-IJnETTalXbsLx1eKEgx19d5L6SRM7cH4vINw/99p/M11HCuXGRWL+6YmCm7FWFGIo6dtWuQoQi1dc5yQ7ESIHg=="],
+
+    "ci-info": ["ci-info@4.3.0", "", {}, "sha512-l+2bNRMiQgcfILUi33labAZYIWlH1kWDp+ecNo5iisRKrbm0xcRyCww71/YU0Fkw0mAFpz9bJayXPjey6vkmaQ=="],
+
+    "cli-boxes": ["cli-boxes@3.0.0", "", {}, "sha512-/lzGpEWL/8PfI0BmBOPRwp0c/wFNX1RdUML3jK/RcSBA9T8mZDdQpqYBKtCFTOfQbwPqWEOpjqW+Fnayc0969g=="],
+
+    "clone": ["clone@2.1.2", "", {}, "sha512-3Pe/CF1Nn94hyhIYpjtiLhdCoEoz0DqQ+988E9gmeEdQZlojxnOb74wctFyuwWQHzqyf9X7C7MG8juUpqBJT8w=="],
+
+    "clsx": ["clsx@2.1.1", "", {}, "sha512-eYm0QWBtUrBWZWG0d386OGAw16Z995PiOVo2B7bjWSbHedGl5e0ZWaq65kOGgUSNesEIDkB9ISbTg/JK9dhCZA=="],
+
+    "collapse-white-space": ["collapse-white-space@2.1.0", "", {}, "sha512-loKTxY1zCOuG4j9f6EPnuyyYkf58RnhhWTvRoZEokgB+WbdXehfjFviyOVYkqzEWz1Q5kRiZdBYS5SwxbQYwzw=="],
+
+    "color": ["color@4.2.3", "", { "dependencies": { "color-convert": "^2.0.1", "color-string": "^1.9.0" } }, "sha512-1rXeuUUiGGrykh+CeBdu5Ie7OJwinCgQY0bc7GCRxy5xVHy+moaqkpL/jqQq0MtQOeYcrqEz4abc5f0KtU7W4A=="],
+
+    "color-convert": ["color-convert@2.0.1", "", { "dependencies": { "color-name": "~1.1.4" } }, "sha512-RRECPsj7iu/xb5oKYcsFHSppFNnsj/52OVTRKb4zP5onXwVF3zVmmToNcOfGC+CRDpfK/U584fMg38ZHCaElKQ=="],
+
+    "color-name": ["color-name@1.1.4", "", {}, "sha512-dOy+3AuW3a2wNbZHIuMZpTcgjGuLU/uBL/ubcZF9OXbDo8ff4O8yVp5Bf0efS8uEoYo5q4Fx7dY9OgQGXgAsQA=="],
+
+    "color-string": ["color-string@1.9.1", "", { "dependencies": { "color-name": "^1.0.0", "simple-swizzle": "^0.2.2" } }, "sha512-shrVawQFojnZv6xM40anx4CkoDP+fZsw/ZerEMsW/pyzsRbElpsL/DBVW7q3ExxwusdNXI3lXpuhEZkzs8p5Eg=="],
+
+    "comma-separated-tokens": ["comma-separated-tokens@2.0.3", "", {}, "sha512-Fu4hJdvzeylCfQPp9SGWidpzrMs7tTrlu6Vb8XGaRGck8QSNZJJp538Wrb60Lax4fPwR64ViY468OIUTbRlGZg=="],
+
+    "commander": ["commander@7.2.0", "", {}, "sha512-QrWXB+ZQSVPmIWIhtEO9H+gwHaMGYiF5ChvoJ+K9ZGHG/sVsa6yiesAD1GC/x46sET00Xlwo1u49RVVVzvcSkw=="],
+
+    "common-ancestor-path": ["common-ancestor-path@1.0.1", "", {}, "sha512-L3sHRo1pXXEqX8VU28kfgUY+YGsk09hPqZiZmLacNib6XNTCM8ubYeT7ryXQw8asB1sKgcU5lkB7ONug08aB8w=="],
+
+    "cookie": ["cookie@1.0.2", "", {}, "sha512-9Kr/j4O16ISv8zBBhJoi4bXOYNTkFLOqSL3UDB0njXxCXNezjeyVrJyGOWtgfs/q2km1gwBcfH8q1yEGoMYunA=="],
+
+    "cookie-es": ["cookie-es@1.2.2", "", {}, "sha512-+W7VmiVINB+ywl1HGXJXmrqkOhpKrIiVZV6tQuV54ZyQC7MMuBt81Vc336GMLoHBq5hV/F9eXgt5Mnx0Rha5Fg=="],
+
+    "cross-fetch": ["cross-fetch@3.2.0", "", { "dependencies": { "node-fetch": "^2.7.0" } }, "sha512-Q+xVJLoGOeIMXZmbUK4HYk+69cQH6LudR0Vu/pRm2YlU/hDV9CiS0gKUMaWY5f2NeUH9C1nV3bsTlCo0FsTV1Q=="],
+
+    "crossws": ["crossws@0.3.5", "", { "dependencies": { "uncrypto": "^0.1.3" } }, "sha512-ojKiDvcmByhwa8YYqbQI/hg7MEU0NC03+pSdEq4ZUnZR9xXpwk7E43SMNGkn+JxJGPFtNvQ48+vV2p+P1ml5PA=="],
+
+    "css-selector-parser": ["css-selector-parser@3.1.3", "", {}, "sha512-gJMigczVZqYAk0hPVzx/M4Hm1D9QOtqkdQk9005TNzDIUGzo5cnHEDiKUT7jGPximL/oYb+LIitcHFQ4aKupxg=="],
+
+    "css-tree": ["css-tree@3.1.0", "", { "dependencies": { "mdn-data": "2.12.2", "source-map-js": "^1.0.1" } }, "sha512-0eW44TGN5SQXU1mWSkKwFstI/22X2bG1nYzZTYMAWjylYURhse752YgbE4Cx46AC+bAvI+/dYTPRk1LqSUnu6w=="],
+
+    "cssesc": ["cssesc@3.0.0", "", { "bin": "bin/cssesc" }, "sha512-/Tb/JcjK111nNScGob5MNtsntNM1aCNUDipB/TkwZFhyDrrE47SOx/18wF2bbjgc3ZzCSKW1T5nt5EbFoAz/Vg=="],
+
+    "d3": ["d3@7.9.0", "", { "dependencies": { "d3-array": "3", "d3-axis": "3", "d3-brush": "3", "d3-chord": "3", "d3-color": "3", "d3-contour": "4", "d3-delaunay": "6", "d3-dispatch": "3", "d3-drag": "3", "d3-dsv": "3", "d3-ease": "3", "d3-fetch": "3", "d3-force": "3", "d3-format": "3", "d3-geo": "3", "d3-hierarchy": "3", "d3-interpolate": "3", "d3-path": "3", "d3-polygon": "3", "d3-quadtree": "3", "d3-random": "3", "d3-scale": "4", "d3-scale-chromatic": "3", "d3-selection": "3", "d3-shape": "3", "d3-time": "3", "d3-time-format": "4", "d3-timer": "3", "d3-transition": "3", "d3-zoom": "3" } }, "sha512-e1U46jVP+w7Iut8Jt8ri1YsPOvFpg46k+K8TpCb0P+zjCkjkPnV7WzfDJzMHy1LnA+wj5pLT1wjO901gLXeEhA=="],
+
+    "d3-array": ["d3-array@3.2.4", "", { "dependencies": { "internmap": "1 - 2" } }, "sha512-tdQAmyA18i4J7wprpYq8ClcxZy3SC31QMeByyCFyRt7BVHdREQZ5lpzoe5mFEYZUWe+oq8HBvk9JjpibyEV4Jg=="],
+
+    "d3-axis": ["d3-axis@3.0.0", "", {}, "sha512-IH5tgjV4jE/GhHkRV0HiVYPDtvfjHQlQfJHs0usq7M30XcSBvOotpmH1IgkcXsO/5gEQZD43B//fc7SRT5S+xw=="],
+
+    "d3-brush": ["d3-brush@3.0.0", "", { "dependencies": { "d3-dispatch": "1 - 3", "d3-drag": "2 - 3", "d3-interpolate": "1 - 3", "d3-selection": "3", "d3-transition": "3" } }, "sha512-ALnjWlVYkXsVIGlOsuWH1+3udkYFI48Ljihfnh8FZPF2QS9o+PzGLBslO0PjzVoHLZ2KCVgAM8NVkXPJB2aNnQ=="],
+
+    "d3-chord": ["d3-chord@3.0.1", "", { "dependencies": { "d3-path": "1 - 3" } }, "sha512-VE5S6TNa+j8msksl7HwjxMHDM2yNK3XCkusIlpX5kwauBfXuyLAtNg9jCp/iHH61tgI4sb6R/EIMWCqEIdjT/g=="],
+
+    "d3-color": ["d3-color@3.1.0", "", {}, "sha512-zg/chbXyeBtMQ1LbD/WSoW2DpC3I0mpmPdW+ynRTj/x2DAWYrIY7qeZIHidozwV24m4iavr15lNwIwLxRmOxhA=="],
+
+    "d3-contour": ["d3-contour@4.0.2", "", { "dependencies": { "d3-array": "^3.2.0" } }, "sha512-4EzFTRIikzs47RGmdxbeUvLWtGedDUNkTcmzoeyg4sP/dvCexO47AaQL7VKy/gul85TOxw+IBgA8US2xwbToNA=="],
+
+    "d3-delaunay": ["d3-delaunay@6.0.4", "", { "dependencies": { "delaunator": "5" } }, "sha512-mdjtIZ1XLAM8bm/hx3WwjfHt6Sggek7qH043O8KEjDXN40xi3vx/6pYSVTwLjEgiXQTbvaouWKynLBiUZ6SK6A=="],
+
+    "d3-dispatch": ["d3-dispatch@3.0.1", "", {}, "sha512-rzUyPU/S7rwUflMyLc1ETDeBj0NRuHKKAcvukozwhshr6g6c5d8zh4c2gQjY2bZ0dXeGLWc1PF174P2tVvKhfg=="],
+
+    "d3-drag": ["d3-drag@3.0.0", "", { "dependencies": { "d3-dispatch": "1 - 3", "d3-selection": "3" } }, "sha512-pWbUJLdETVA8lQNJecMxoXfH6x+mO2UQo8rSmZ+QqxcbyA3hfeprFgIT//HW2nlHChWeIIMwS2Fq+gEARkhTkg=="],
+
+    "d3-dsv": ["d3-dsv@3.0.1", "", { "dependencies": { "commander": "7", "iconv-lite": "0.6", "rw": "1" }, "bin": { "csv2json": "bin/dsv2json.js", "csv2tsv": "bin/dsv2dsv.js", "dsv2dsv": "bin/dsv2dsv.js", "dsv2json": "bin/dsv2json.js", "json2csv": "bin/json2dsv.js", "json2dsv": "bin/json2dsv.js", "json2tsv": "bin/json2dsv.js", "tsv2csv": "bin/dsv2dsv.js", "tsv2json": "bin/dsv2json.js" } }, "sha512-UG6OvdI5afDIFP9w4G0mNq50dSOsXHJaRE8arAS5o9ApWnIElp8GZw1Dun8vP8OyHOZ/QJUKUJwxiiCCnUwm+Q=="],
+
+    "d3-ease": ["d3-ease@3.0.1", "", {}, "sha512-wR/XK3D3XcLIZwpbvQwQ5fK+8Ykds1ip7A2Txe0yxncXSdq1L9skcG7blcedkOX+ZcgxGAmLX1FrRGbADwzi0w=="],
+
+    "d3-fetch": ["d3-fetch@3.0.1", "", { "dependencies": { "d3-dsv": "1 - 3" } }, "sha512-kpkQIM20n3oLVBKGg6oHrUchHM3xODkTzjMoj7aWQFq5QEM+R6E4WkzT5+tojDY7yjez8KgCBRoj4aEr99Fdqw=="],
+
+    "d3-force": ["d3-force@3.0.0", "", { "dependencies": { "d3-dispatch": "1 - 3", "d3-quadtree": "1 - 3", "d3-timer": "1 - 3" } }, "sha512-zxV/SsA+U4yte8051P4ECydjD/S+qeYtnaIyAs9tgHCqfguma/aAQDjo85A9Z6EKhBirHRJHXIgJUlffT4wdLg=="],
+
+    "d3-format": ["d3-format@3.1.0", "", {}, "sha512-YyUI6AEuY/Wpt8KWLgZHsIU86atmikuoOmCfommt0LYHiQSPjvX2AcFc38PX0CBpr2RCyZhjex+NS/LPOv6YqA=="],
+
+    "d3-geo": ["d3-geo@3.1.1", "", { "dependencies": { "d3-array": "2.5.0 - 3" } }, "sha512-637ln3gXKXOwhalDzinUgY83KzNWZRKbYubaG+fGVuc/dxO64RRljtCTnf5ecMyE1RIdtqpkVcq0IbtU2S8j2Q=="],
+
+    "d3-hierarchy": ["d3-hierarchy@3.1.2", "", {}, "sha512-FX/9frcub54beBdugHjDCdikxThEqjnR93Qt7PvQTOHxyiNCAlvMrHhclk3cD5VeAaq9fxmfRp+CnWw9rEMBuA=="],
+
+    "d3-interpolate": ["d3-interpolate@3.0.1", "", { "dependencies": { "d3-color": "1 - 3" } }, "sha512-3bYs1rOD33uo8aqJfKP3JWPAibgw8Zm2+L9vBKEHJ2Rg+viTR7o5Mmv5mZcieN+FRYaAOWX5SJATX6k1PWz72g=="],
+
+    "d3-path": ["d3-path@3.1.0", "", {}, "sha512-p3KP5HCf/bvjBSSKuXid6Zqijx7wIfNW+J/maPs+iwR35at5JCbLUT0LzF1cnjbCHWhqzQTIN2Jpe8pRebIEFQ=="],
+
+    "d3-polygon": ["d3-polygon@3.0.1", "", {}, "sha512-3vbA7vXYwfe1SYhED++fPUQlWSYTTGmFmQiany/gdbiWgU/iEyQzyymwL9SkJjFFuCS4902BSzewVGsHHmHtXg=="],
+
+    "d3-quadtree": ["d3-quadtree@3.0.1", "", {}, "sha512-04xDrxQTDTCFwP5H6hRhsRcb9xxv2RzkcsygFzmkSIOJy3PeRJP7sNk3VRIbKXcog561P9oU0/rVH6vDROAgUw=="],
+
+    "d3-random": ["d3-random@3.0.1", "", {}, "sha512-FXMe9GfxTxqd5D6jFsQ+DJ8BJS4E/fT5mqqdjovykEB2oFbTMDVdg1MGFxfQW+FBOGoB++k8swBrgwSHT1cUXQ=="],
+
+    "d3-scale": ["d3-scale@4.0.2", "", { "dependencies": { "d3-array": "2.10.0 - 3", "d3-format": "1 - 3", "d3-interpolate": "1.2.0 - 3", "d3-time": "2.1.1 - 3", "d3-time-format": "2 - 4" } }, "sha512-GZW464g1SH7ag3Y7hXjf8RoUuAFIqklOAq3MRl4OaWabTFJY9PN/E1YklhXLh+OQ3fM9yS2nOkCoS+WLZ6kvxQ=="],
+
+    "d3-scale-chromatic": ["d3-scale-chromatic@3.1.0", "", { "dependencies": { "d3-color": "1 - 3", "d3-interpolate": "1 - 3" } }, "sha512-A3s5PWiZ9YCXFye1o246KoscMWqf8BsD9eRiJ3He7C9OBaxKhAd5TFCdEx/7VbKtxxTsu//1mMJFrEt572cEyQ=="],
+
+    "d3-selection": ["d3-selection@3.0.0", "", {}, "sha512-fmTRWbNMmsmWq6xJV8D19U/gw/bwrHfNXxrIN+HfZgnzqTHp9jOmKMhsTUjXOJnZOdZY9Q28y4yebKzqDKlxlQ=="],
+
+    "d3-shape": ["d3-shape@3.2.0", "", { "dependencies": { "d3-path": "^3.1.0" } }, "sha512-SaLBuwGm3MOViRq2ABk3eLoxwZELpH6zhl3FbAoJ7Vm1gofKx6El1Ib5z23NUEhF9AsGl7y+dzLe5Cw2AArGTA=="],
+
+    "d3-time": ["d3-time@3.1.0", "", { "dependencies": { "d3-array": "2 - 3" } }, "sha512-VqKjzBLejbSMT4IgbmVgDjpkYrNWUYJnbCGo874u7MMKIWsILRX+OpX/gTk8MqjpT1A/c6HY2dCA77ZN0lkQ2Q=="],
+
+    "d3-time-format": ["d3-time-format@4.1.0", "", { "dependencies": { "d3-time": "1 - 3" } }, "sha512-dJxPBlzC7NugB2PDLwo9Q8JiTR3M3e4/XANkreKSUxF8vvXKqm1Yfq4Q5dl8budlunRVlUUaDUgFt7eA8D6NLg=="],
+
+    "d3-timer": ["d3-timer@3.0.1", "", {}, "sha512-ndfJ/JxxMd3nw31uyKoY2naivF+r29V+Lc0svZxe1JvvIRmi8hUsrMvdOwgS1o6uBHmiz91geQ0ylPP0aj1VUA=="],
+
+    "d3-transition": ["d3-transition@3.0.1", "", { "dependencies": { "d3-color": "1 - 3", "d3-dispatch": "1 - 3", "d3-ease": "1 - 3", "d3-interpolate": "1 - 3", "d3-timer": "1 - 3" }, "peerDependencies": { "d3-selection": "2 - 3" } }, "sha512-ApKvfjsSR6tg06xrL434C0WydLr7JewBB3V+/39RMHsaXTOG0zmt/OAXeng5M5LBm0ojmxJrpomQVZ1aPvBL4w=="],
+
+    "d3-zoom": ["d3-zoom@3.0.0", "", { "dependencies": { "d3-dispatch": "1 - 3", "d3-drag": "2 - 3", "d3-interpolate": "1 - 3", "d3-selection": "2 - 3", "d3-transition": "2 - 3" } }, "sha512-b8AmV3kfQaqWAuacbPuNbL6vahnOJflOhexLzMMNLga62+/nh0JzvJ0aO/5a5MVgUFGS7Hu1P9P03o3fJkDCyw=="],
+
+    "debug": ["debug@4.4.1", "", { "dependencies": { "ms": "^2.1.3" } }, "sha512-KcKCqiftBJcZr++7ykoDIEwSa3XWowTfNPo92BYxjXiyYEVrUQh2aLyhxBCwww+heortUFxEJYcRzosstTEBYQ=="],
+
+    "decode-named-character-reference": ["decode-named-character-reference@1.2.0", "", { "dependencies": { "character-entities": "^2.0.0" } }, "sha512-c6fcElNV6ShtZXmsgNgFFV5tVX2PaV4g+MOAkb8eXHvn6sryJBrZa9r0zV6+dtTyoCKxtDy5tyQ5ZwQuidtd+Q=="],
+
+    "defu": ["defu@6.1.4", "", {}, "sha512-mEQCMmwJu317oSz8CwdIOdwf3xMif1ttiM8LTufzc3g6kR+9Pe236twL8j3IYT1F7GfRgGcW6MWxzZjLIkuHIg=="],
+
+    "delaunator": ["delaunator@5.0.1", "", { "dependencies": { "robust-predicates": "^3.0.2" } }, "sha512-8nvh+XBe96aCESrGOqMp/84b13H9cdKbG5P2ejQCh4d4sK9RL4371qou9drQjMhvnPmhWl5hnmqbEE0fXr9Xnw=="],
+
+    "dequal": ["dequal@2.0.3", "", {}, "sha512-0je+qPKHEMohvfRTCEo3CrPG6cAzAYgmzKyxRiYSSDkS6eGJdyVJm7WaYA5ECaAD9wLB2T4EEeymA5aFVcYXCA=="],
+
+    "destr": ["destr@2.0.5", "", {}, "sha512-ugFTXCtDZunbzasqBxrK93Ik/DRYsO6S/fedkWEMKqt04xZ4csmnmwGDBAb07QWNaGMAmnTIemsYZCksjATwsA=="],
+
+    "detect-libc": ["detect-libc@2.0.4", "", {}, "sha512-3UDv+G9CsCKO1WKMGw9fwq/SWJYbI0c5Y7LU1AXYoDdbhE2AHQ6N6Nb34sG8Fj7T5APy8qXDCKuuIHd1BR0tVA=="],
+
+    "deterministic-object-hash": ["deterministic-object-hash@2.0.2", "", { "dependencies": { "base-64": "^1.0.0" } }, "sha512-KxektNH63SrbfUyDiwXqRb1rLwKt33AmMv+5Nhsw1kqZ13SJBRTgZHtGbE+hH3a1mVW1cz+4pqSWVPAtLVXTzQ=="],
+
+    "devalue": ["devalue@5.1.1", "", {}, "sha512-maua5KUiapvEwiEAe+XnlZ3Rh0GD+qI1J/nb9vrJc3muPXvcF/8gXYTWF76+5DAqHyDUtOIImEuo0YKE9mshVw=="],
+
+    "devlop": ["devlop@1.1.0", "", { "dependencies": { "dequal": "^2.0.0" } }, "sha512-RWmIqhcFf1lRYBvNmr7qTNuyCt/7/ns2jbpp1+PalgE/rDQcBT0fioSMUpJ93irlUhC5hrg4cYqe6U+0ImW0rA=="],
+
+    "dfa": ["dfa@1.2.0", "", {}, "sha512-ED3jP8saaweFTjeGX8HQPjeC1YYyZs98jGNZx6IiBvxW7JG5v492kamAQB3m2wop07CvU/RQmzcKr6bgcC5D/Q=="],
+
+    "diff": ["diff@5.2.0", "", {}, "sha512-uIFDxqpRZGZ6ThOk84hEfqWoHx2devRFvpTZcTHur85vImfaxUbTW9Ryh4CpCuDnToOP1CEtXKIgytHBPVff5A=="],
+
+    "direction": ["direction@2.0.1", "", { "bin": "cli.js" }, "sha512-9S6m9Sukh1cZNknO1CWAr2QAWsbKLafQiyM5gZ7VgXHeuaoUwffKN4q6NC4A/Mf9iiPlOXQEKW/Mv/mh9/3YFA=="],
+
+    "dlv": ["dlv@1.1.3", "", {}, "sha512-+HlytyjlPKnIG8XuRG8WvmBP8xs8P71y+SKKS6ZXWoEgLuePxtDoUEiH7WkdePWrQ5JBpE6aoVqfZfJUQkjXwA=="],
+
+    "dset": ["dset@3.1.4", "", {}, "sha512-2QF/g9/zTaPDc3BjNcVTGoBbXBgYfMTTceLaYcFJ/W9kggFUkhxD/hMEeuLKbugyef9SqAx8cpgwlIP/jinUTA=="],
+
+    "emoji-regex": ["emoji-regex@10.4.0", "", {}, "sha512-EC+0oUMY1Rqm4O6LLrgjtYDvcVYTy7chDnM4Q7030tP4Kwj3u/pR6gP9ygnp2CJMK5Gq+9Q2oqmrFJAz01DXjw=="],
+
+    "entities": ["entities@6.0.1", "", {}, "sha512-aN97NXWF6AWBTahfVOIrB/NShkzi5H7F9r1s9mD3cDj4Ko5f2qhhVoYMibXF7GlLveb/D2ioWay8lxI97Ven3g=="],
+
+    "es-module-lexer": ["es-module-lexer@1.7.0", "", {}, "sha512-jEQoCwk8hyb2AZziIOLhDqpm5+2ww5uIE6lkO/6jcOCusfk6LhMHpXXfBLXTZ7Ydyt0j4VoUQv6uGNYbdW+kBA=="],
+
+    "esast-util-from-estree": ["esast-util-from-estree@2.0.0", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "devlop": "^1.0.0", "estree-util-visit": "^2.0.0", "unist-util-position-from-estree": "^2.0.0" } }, "sha512-4CyanoAudUSBAn5K13H4JhsMH6L9ZP7XbLVe/dKybkxMO7eDyLsT8UHl9TRNrU2Gr9nz+FovfSIjuXWJ81uVwQ=="],
+
+    "esast-util-from-js": ["esast-util-from-js@2.0.1", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "acorn": "^8.0.0", "esast-util-from-estree": "^2.0.0", "vfile-message": "^4.0.0" } }, "sha512-8Ja+rNJ0Lt56Pcf3TAmpBZjmx8ZcK5Ts4cAzIOjsjevg9oSXJnl6SUQ2EevU8tv3h6ZLWmoKL5H4fgWvdvfETw=="],
+
+    "esbuild": ["esbuild@0.25.9", "", { "optionalDependencies": { "@esbuild/aix-ppc64": "0.25.9", "@esbuild/android-arm": "0.25.9", "@esbuild/android-arm64": "0.25.9", "@esbuild/android-x64": "0.25.9", "@esbuild/darwin-arm64": "0.25.9", "@esbuild/darwin-x64": "0.25.9", "@esbuild/freebsd-arm64": "0.25.9", "@esbuild/freebsd-x64": "0.25.9", "@esbuild/linux-arm": "0.25.9", "@esbuild/linux-arm64": "0.25.9", "@esbuild/linux-ia32": "0.25.9", "@esbuild/linux-loong64": "0.25.9", "@esbuild/linux-mips64el": "0.25.9", "@esbuild/linux-ppc64": "0.25.9", "@esbuild/linux-riscv64": "0.25.9", "@esbuild/linux-s390x": "0.25.9", "@esbuild/linux-x64": "0.25.9", "@esbuild/netbsd-arm64": "0.25.9", "@esbuild/netbsd-x64": "0.25.9", "@esbuild/openbsd-arm64": "0.25.9", "@esbuild/openbsd-x64": "0.25.9", "@esbuild/openharmony-arm64": "0.25.9", "@esbuild/sunos-x64": "0.25.9", "@esbuild/win32-arm64": "0.25.9", "@esbuild/win32-ia32": "0.25.9", "@esbuild/win32-x64": "0.25.9" }, "bin": "bin/esbuild" }, "sha512-CRbODhYyQx3qp7ZEwzxOk4JBqmD/seJrzPa/cGjY1VtIn5E09Oi9/dB4JwctnfZ8Q8iT7rioVv5k/FNT/uf54g=="],
+
+    "escape-string-regexp": ["escape-string-regexp@5.0.0", "", {}, "sha512-/veY75JbMK4j1yjvuUxuVsiS/hr/4iHs9FTT6cgTexxdE0Ly/glccBAkloH/DofkjRbZU3bnoj38mOmhkZ0lHw=="],
+
+    "esprima": ["esprima@4.0.1", "", { "bin": { "esparse": "./bin/esparse.js", "esvalidate": "./bin/esvalidate.js" } }, "sha512-eGuFFw7Upda+g4p+QHvnW0RyTX/SVeJBDM/gCtMARO0cLuT2HcEKnTPvhjV6aGeqrCB/sbNop0Kszm0jsaWU4A=="],
+
+    "estree-util-attach-comments": ["estree-util-attach-comments@3.0.0", "", { "dependencies": { "@types/estree": "^1.0.0" } }, "sha512-cKUwm/HUcTDsYh/9FgnuFqpfquUbwIqwKM26BVCGDPVgvaCl/nDCCjUfiLlx6lsEZ3Z4RFxNbOQ60pkaEwFxGw=="],
+
+    "estree-util-build-jsx": ["estree-util-build-jsx@3.0.1", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "devlop": "^1.0.0", "estree-util-is-identifier-name": "^3.0.0", "estree-walker": "^3.0.0" } }, "sha512-8U5eiL6BTrPxp/CHbs2yMgP8ftMhR5ww1eIKoWRMlqvltHF8fZn5LRDvTKuxD3DUn+shRbLGqXemcP51oFCsGQ=="],
+
+    "estree-util-is-identifier-name": ["estree-util-is-identifier-name@3.0.0", "", {}, "sha512-hFtqIDZTIUZ9BXLb8y4pYGyk6+wekIivNVTcmvk8NoOh+VeRn5y6cEHzbURrWbfp1fIqdVipilzj+lfaadNZmg=="],
+
+    "estree-util-scope": ["estree-util-scope@1.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "devlop": "^1.0.0" } }, "sha512-2CAASclonf+JFWBNJPndcOpA8EMJwa0Q8LUFJEKqXLW6+qBvbFZuF5gItbQOs/umBUkjviCSDCbBwU2cXbmrhQ=="],
+
+    "estree-util-to-js": ["estree-util-to-js@2.0.0", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "astring": "^1.8.0", "source-map": "^0.7.0" } }, "sha512-WDF+xj5rRWmD5tj6bIqRi6CkLIXbbNQUcxQHzGysQzvHmdYG2G7p/Tf0J0gpxGgkeMZNTIjT/AoSvC9Xehcgdg=="],
+
+    "estree-util-visit": ["estree-util-visit@2.0.0", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "@types/unist": "^3.0.0" } }, "sha512-m5KgiH85xAhhW8Wta0vShLcUvOsh3LLPI2YVwcbio1l7E09NTLL1EyMZFM1OyWowoH0skScNbhOPl4kcBgzTww=="],
+
+    "estree-walker": ["estree-walker@3.0.3", "", { "dependencies": { "@types/estree": "^1.0.0" } }, "sha512-7RUKfXgSMMkzt6ZuXmqapOurLGPPfgj6l9uRZ7lRGolvk0y2yocc35LdcxKC5PQZdn2DMqioAQ2NoWcrTKmm6g=="],
+
+    "eventemitter3": ["eventemitter3@5.0.1", "", {}, "sha512-GWkBvjiSZK87ELrYOSESUYeVIc9mvLLf/nXalMOS5dYrgZq9o5OVkbZAVM06CVxYsCwH9BDZFPlQTlPA1j4ahA=="],
+
+    "expressive-code": ["expressive-code@0.41.3", "", { "dependencies": { "@expressive-code/core": "^0.41.3", "@expressive-code/plugin-frames": "^0.41.3", "@expressive-code/plugin-shiki": "^0.41.3", "@expressive-code/plugin-text-markers": "^0.41.3" } }, "sha512-YLnD62jfgBZYrXIPQcJ0a51Afv9h8VlWqEGK9uU2T5nL/5rb8SnA86+7+mgCZe5D34Tff5RNEA5hjNVJYHzrFg=="],
+
+    "extend": ["extend@3.0.2", "", {}, "sha512-fjquC59cD7CyW6urNXK0FBufkZcoiGG80wTuPujX590cB5Ttln20E2UB4S/WARVqhXffZl2LNgS+gQdPIIim/g=="],
+
+    "extend-shallow": ["extend-shallow@2.0.1", "", { "dependencies": { "is-extendable": "^0.1.0" } }, "sha512-zCnTtlxNoAiDc3gqY2aYAWFx7XWWiasuF2K8Me5WbN8otHKTUKBwjPtNpRs/rbUZm7KxWAaNj7P1a/p52GbVug=="],
+
+    "fast-deep-equal": ["fast-deep-equal@3.1.3", "", {}, "sha512-f3qQ9oQy9j2AhBe/H9VC91wLmKBCCU/gDOnKNAYG5hswO7BLKj09Hc5HYNz9cGI++xlpDCIgDaitVs03ATR84Q=="],
+
+    "fdir": ["fdir@6.4.6", "", { "peerDependencies": { "picomatch": "^3 || ^4" } }, "sha512-hiFoqpyZcfNm1yc4u8oWCf9A2c4D3QjCrks3zmoVKVxpQRzmPNar1hUJcBG2RQHvEVGDN+Jm81ZheVLAQMK6+w=="],
+
+    "fill-range": ["fill-range@7.1.1", "", { "dependencies": { "to-regex-range": "^5.0.1" } }, "sha512-YsGpe3WHLK8ZYi4tWDg2Jy3ebRz2rXowDxnld4bkQB00cc/1Zw9AWnC0i9ztDJitivtQvaI9KaLyKrc+hBW0yg=="],
+
+    "flattie": ["flattie@1.1.1", "", {}, "sha512-9UbaD6XdAL97+k/n+N7JwX46K/M6Zc6KcFYskrYL8wbBV/Uyk0CTAMY0VT+qiK5PM7AIc9aTWYtq65U7T+aCNQ=="],
+
+    "fontace": ["fontace@0.3.0", "", { "dependencies": { "@types/fontkit": "^2.0.8", "fontkit": "^2.0.4" } }, "sha512-czoqATrcnxgWb/nAkfyIrRp6Q8biYj7nGnL6zfhTcX+JKKpWHFBnb8uNMw/kZr7u++3Y3wYSYoZgHkCcsuBpBg=="],
+
+    "fontkit": ["fontkit@2.0.4", "", { "dependencies": { "@swc/helpers": "^0.5.12", "brotli": "^1.3.2", "clone": "^2.1.2", "dfa": "^1.2.0", "fast-deep-equal": "^3.1.3", "restructure": "^3.0.0", "tiny-inflate": "^1.0.3", "unicode-properties": "^1.4.0", "unicode-trie": "^2.0.0" } }, "sha512-syetQadaUEDNdxdugga9CpEYVaQIxOwk7GlwZWWZ19//qW4zE5bknOKeMBDYAASwnpaSHKJITRLMF9m1fp3s6g=="],
+
+    "fsevents": ["fsevents@2.3.3", "", { "os": "darwin" }, "sha512-5xoDfX+fL7faATnagmWPpbFtwh/R77WmMMqqHGS65C3vvB0YHrgF+B1YmZ3441tMj5n63k0212XNoJwzlhffQw=="],
+
+    "get-east-asian-width": ["get-east-asian-width@1.3.0", "", {}, "sha512-vpeMIQKxczTD/0s2CdEWHcb0eeJe6TFjxb+J5xgX7hScxqrGuyjmv4c1D4A/gelKfyox0gJJwIHF+fLjeaM8kQ=="],
+
+    "github-slugger": ["github-slugger@2.0.0", "", {}, "sha512-IaOQ9puYtjrkq7Y0Ygl9KDZnrf/aiUJYUpVf89y8kyaxbRG7Y1SrX/jaumrv81vc61+kiMempujsM3Yw7w5qcw=="],
+
+    "gray-matter": ["gray-matter@4.0.3", "", { "dependencies": { "js-yaml": "^3.13.1", "kind-of": "^6.0.2", "section-matter": "^1.0.0", "strip-bom-string": "^1.0.0" } }, "sha512-5v6yZd4JK3eMI3FqqCouswVqwugaA9r4dNZB1wwcmrD02QkV5H0y7XBQW8QwQqEaZY1pM9aqORSORhJRdNK44Q=="],
+
+    "h3": ["h3@1.15.4", "", { "dependencies": { "cookie-es": "^1.2.2", "crossws": "^0.3.5", "defu": "^6.1.4", "destr": "^2.0.5", "iron-webcrypto": "^1.2.1", "node-mock-http": "^1.0.2", "radix3": "^1.1.2", "ufo": "^1.6.1", "uncrypto": "^0.1.3" } }, "sha512-z5cFQWDffyOe4vQ9xIqNfCZdV4p//vy6fBnr8Q1AWnVZ0teurKMG66rLj++TKwKPUP3u7iMUvrvKaEUiQw2QWQ=="],
+
+    "hast-util-embedded": ["hast-util-embedded@3.0.0", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-is-element": "^3.0.0" } }, "sha512-naH8sld4Pe2ep03qqULEtvYr7EjrLK2QHY8KJR6RJkTUjPGObe1vnx585uzem2hGra+s1q08DZZpfgDVYRbaXA=="],
+
+    "hast-util-format": ["hast-util-format@1.1.0", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-embedded": "^3.0.0", "hast-util-minify-whitespace": "^1.0.0", "hast-util-phrasing": "^3.0.0", "hast-util-whitespace": "^3.0.0", "html-whitespace-sensitive-tag-names": "^3.0.0", "unist-util-visit-parents": "^6.0.0" } }, "sha512-yY1UDz6bC9rDvCWHpx12aIBGRG7krurX0p0Fm6pT547LwDIZZiNr8a+IHDogorAdreULSEzP82Nlv5SZkHZcjA=="],
+
+    "hast-util-from-html": ["hast-util-from-html@2.0.3", "", { "dependencies": { "@types/hast": "^3.0.0", "devlop": "^1.1.0", "hast-util-from-parse5": "^8.0.0", "parse5": "^7.0.0", "vfile": "^6.0.0", "vfile-message": "^4.0.0" } }, "sha512-CUSRHXyKjzHov8yKsQjGOElXy/3EKpyX56ELnkHH34vDVw1N1XSQ1ZcAvTyAPtGqLTuKP/uxM+aLkSPqF/EtMw=="],
+
+    "hast-util-from-parse5": ["hast-util-from-parse5@8.0.3", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "devlop": "^1.0.0", "hastscript": "^9.0.0", "property-information": "^7.0.0", "vfile": "^6.0.0", "vfile-location": "^5.0.0", "web-namespaces": "^2.0.0" } }, "sha512-3kxEVkEKt0zvcZ3hCRYI8rqrgwtlIOFMWkbclACvjlDw8Li9S2hk/d51OI0nr/gIpdMHNepwgOKqZ/sy0Clpyg=="],
+
+    "hast-util-has-property": ["hast-util-has-property@3.0.0", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-MNilsvEKLFpV604hwfhVStK0usFY/QmM5zX16bo7EjnAEGofr5YyI37kzopBlZJkHD4t887i+q/C8/tr5Q94cA=="],
+
+    "hast-util-is-body-ok-link": ["hast-util-is-body-ok-link@3.0.1", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-0qpnzOBLztXHbHQenVB8uNuxTnm/QBFUOmdOSsEn7GnBtyY07+ENTWVFBAnXd/zEgd9/SUG3lRY7hSIBWRgGpQ=="],
+
+    "hast-util-is-element": ["hast-util-is-element@3.0.0", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-Val9mnv2IWpLbNPqc/pUem+a7Ipj2aHacCwgNfTiK0vJKl0LF+4Ba4+v1oPHFpf3bLYmreq0/l3Gud9S5OH42g=="],
+
+    "hast-util-minify-whitespace": ["hast-util-minify-whitespace@1.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-embedded": "^3.0.0", "hast-util-is-element": "^3.0.0", "hast-util-whitespace": "^3.0.0", "unist-util-is": "^6.0.0" } }, "sha512-L96fPOVpnclQE0xzdWb/D12VT5FabA7SnZOUMtL1DbXmYiHJMXZvFkIZfiMmTCNJHUeO2K9UYNXoVyfz+QHuOw=="],
+
+    "hast-util-parse-selector": ["hast-util-parse-selector@4.0.0", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-wkQCkSYoOGCRKERFWcxMVMOcYE2K1AaNLU8DXS9arxnLOUEWbOXKXiJUNzEpqZ3JOKpnha3jkFrumEjVliDe7A=="],
+
+    "hast-util-phrasing": ["hast-util-phrasing@3.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-embedded": "^3.0.0", "hast-util-has-property": "^3.0.0", "hast-util-is-body-ok-link": "^3.0.0", "hast-util-is-element": "^3.0.0" } }, "sha512-6h60VfI3uBQUxHqTyMymMZnEbNl1XmEGtOxxKYL7stY2o601COo62AWAYBQR9lZbYXYSBoxag8UpPRXK+9fqSQ=="],
+
+    "hast-util-raw": ["hast-util-raw@9.1.0", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "@ungap/structured-clone": "^1.0.0", "hast-util-from-parse5": "^8.0.0", "hast-util-to-parse5": "^8.0.0", "html-void-elements": "^3.0.0", "mdast-util-to-hast": "^13.0.0", "parse5": "^7.0.0", "unist-util-position": "^5.0.0", "unist-util-visit": "^5.0.0", "vfile": "^6.0.0", "web-namespaces": "^2.0.0", "zwitch": "^2.0.0" } }, "sha512-Y8/SBAHkZGoNkpzqqfCldijcuUKh7/su31kEBp67cFY09Wy0mTRgtsLYsiIxMJxlu0f6AA5SUTbDR8K0rxnbUw=="],
+
+    "hast-util-select": ["hast-util-select@6.0.4", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "bcp-47-match": "^2.0.0", "comma-separated-tokens": "^2.0.0", "css-selector-parser": "^3.0.0", "devlop": "^1.0.0", "direction": "^2.0.0", "hast-util-has-property": "^3.0.0", "hast-util-to-string": "^3.0.0", "hast-util-whitespace": "^3.0.0", "nth-check": "^2.0.0", "property-information": "^7.0.0", "space-separated-tokens": "^2.0.0", "unist-util-visit": "^5.0.0", "zwitch": "^2.0.0" } }, "sha512-RqGS1ZgI0MwxLaKLDxjprynNzINEkRHY2i8ln4DDjgv9ZhcYVIHN9rlpiYsqtFwrgpYU361SyWDQcGNIBVu3lw=="],
+
+    "hast-util-to-estree": ["hast-util-to-estree@3.1.3", "", { "dependencies": { "@types/estree": "^1.0.0", "@types/estree-jsx": "^1.0.0", "@types/hast": "^3.0.0", "comma-separated-tokens": "^2.0.0", "devlop": "^1.0.0", "estree-util-attach-comments": "^3.0.0", "estree-util-is-identifier-name": "^3.0.0", "hast-util-whitespace": "^3.0.0", "mdast-util-mdx-expression": "^2.0.0", "mdast-util-mdx-jsx": "^3.0.0", "mdast-util-mdxjs-esm": "^2.0.0", "property-information": "^7.0.0", "space-separated-tokens": "^2.0.0", "style-to-js": "^1.0.0", "unist-util-position": "^5.0.0", "zwitch": "^2.0.0" } }, "sha512-48+B/rJWAp0jamNbAAf9M7Uf//UVqAoMmgXhBdxTDJLGKY+LRnZ99qcG+Qjl5HfMpYNzS5v4EAwVEF34LeAj7w=="],
+
+    "hast-util-to-html": ["hast-util-to-html@9.0.5", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "ccount": "^2.0.0", "comma-separated-tokens": "^2.0.0", "hast-util-whitespace": "^3.0.0", "html-void-elements": "^3.0.0", "mdast-util-to-hast": "^13.0.0", "property-information": "^7.0.0", "space-separated-tokens": "^2.0.0", "stringify-entities": "^4.0.0", "zwitch": "^2.0.4" } }, "sha512-OguPdidb+fbHQSU4Q4ZiLKnzWo8Wwsf5bZfbvu7//a9oTYoqD/fWpe96NuHkoS9h0ccGOTe0C4NGXdtS0iObOw=="],
+
+    "hast-util-to-jsx-runtime": ["hast-util-to-jsx-runtime@2.3.6", "", { "dependencies": { "@types/estree": "^1.0.0", "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "comma-separated-tokens": "^2.0.0", "devlop": "^1.0.0", "estree-util-is-identifier-name": "^3.0.0", "hast-util-whitespace": "^3.0.0", "mdast-util-mdx-expression": "^2.0.0", "mdast-util-mdx-jsx": "^3.0.0", "mdast-util-mdxjs-esm": "^2.0.0", "property-information": "^7.0.0", "space-separated-tokens": "^2.0.0", "style-to-js": "^1.0.0", "unist-util-position": "^5.0.0", "vfile-message": "^4.0.0" } }, "sha512-zl6s8LwNyo1P9uw+XJGvZtdFF1GdAkOg8ujOw+4Pyb76874fLps4ueHXDhXWdk6YHQ6OgUtinliG7RsYvCbbBg=="],
+
+    "hast-util-to-mdast": ["hast-util-to-mdast@10.1.2", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "@ungap/structured-clone": "^1.0.0", "hast-util-phrasing": "^3.0.0", "hast-util-to-html": "^9.0.0", "hast-util-to-text": "^4.0.0", "hast-util-whitespace": "^3.0.0", "mdast-util-phrasing": "^4.0.0", "mdast-util-to-hast": "^13.0.0", "mdast-util-to-string": "^4.0.0", "rehype-minify-whitespace": "^6.0.0", "trim-trailing-lines": "^2.0.0", "unist-util-position": "^5.0.0", "unist-util-visit": "^5.0.0" } }, "sha512-FiCRI7NmOvM4y+f5w32jPRzcxDIz+PUqDwEqn1A+1q2cdp3B8Gx7aVrXORdOKjMNDQsD1ogOr896+0jJHW1EFQ=="],
+
+    "hast-util-to-parse5": ["hast-util-to-parse5@8.0.0", "", { "dependencies": { "@types/hast": "^3.0.0", "comma-separated-tokens": "^2.0.0", "devlop": "^1.0.0", "property-information": "^6.0.0", "space-separated-tokens": "^2.0.0", "web-namespaces": "^2.0.0", "zwitch": "^2.0.0" } }, "sha512-3KKrV5ZVI8if87DVSi1vDeByYrkGzg4mEfeu4alwgmmIeARiBLKCZS2uw5Gb6nU9x9Yufyj3iudm6i7nl52PFw=="],
+
+    "hast-util-to-string": ["hast-util-to-string@3.0.1", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-XelQVTDWvqcl3axRfI0xSeoVKzyIFPwsAGSLIsKdJKQMXDYJS4WYrBNF/8J7RdhIcFI2BOHgAifggsvsxp/3+A=="],
+
+    "hast-util-to-text": ["hast-util-to-text@4.0.2", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/unist": "^3.0.0", "hast-util-is-element": "^3.0.0", "unist-util-find-after": "^5.0.0" } }, "sha512-KK6y/BN8lbaq654j7JgBydev7wuNMcID54lkRav1P0CaE1e47P72AWWPiGKXTJU271ooYzcvTAn/Zt0REnvc7A=="],
+
+    "hast-util-whitespace": ["hast-util-whitespace@3.0.0", "", { "dependencies": { "@types/hast": "^3.0.0" } }, "sha512-88JUN06ipLwsnv+dVn+OIYOvAuvBMy/Qoi6O7mQHxdPXpjy+Cd6xRkWwux7DKO+4sYILtLBRIKgsdpS2gQc7qw=="],
+
+    "hastscript": ["hastscript@9.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "comma-separated-tokens": "^2.0.0", "hast-util-parse-selector": "^4.0.0", "property-information": "^7.0.0", "space-separated-tokens": "^2.0.0" } }, "sha512-g7df9rMFX/SPi34tyGCyUBREQoKkapwdY/T04Qn9TDWfHhAYt4/I0gMVirzK5wEzeUqIjEB+LXC/ypb7Aqno5w=="],
+
+    "html-escaper": ["html-escaper@3.0.3", "", {}, "sha512-RuMffC89BOWQoY0WKGpIhn5gX3iI54O6nRA0yC124NYVtzjmFWBIiFd8M0x+ZdX0P9R4lADg1mgP8C7PxGOWuQ=="],
+
+    "html-void-elements": ["html-void-elements@3.0.0", "", {}, "sha512-bEqo66MRXsUGxWHV5IP0PUiAWwoEjba4VCzg0LjFJBpchPaTfyfCKTG6bc5F8ucKec3q5y6qOdGyYTSBEvhCrg=="],
+
+    "html-whitespace-sensitive-tag-names": ["html-whitespace-sensitive-tag-names@3.0.1", "", {}, "sha512-q+310vW8zmymYHALr1da4HyXUQ0zgiIwIicEfotYPWGN0OJVEN/58IJ3A4GBYcEq3LGAZqKb+ugvP0GNB9CEAA=="],
+
+    "http-cache-semantics": ["http-cache-semantics@4.2.0", "", {}, "sha512-dTxcvPXqPvXBQpq5dUr6mEMJX4oIEFv6bwom3FDwKRDsuIjjJGANqhBuoAn9c1RQJIdAKav33ED65E2ys+87QQ=="],
+
+    "i18next": ["i18next@23.16.8", "", { "dependencies": { "@babel/runtime": "^7.23.2" } }, "sha512-06r/TitrM88Mg5FdUXAKL96dJMzgqLE5dv3ryBAra4KCwD9mJ4ndOTS95ZuymIGoE+2hzfdaMak2X11/es7ZWg=="],
+
+    "iconv-lite": ["iconv-lite@0.6.3", "", { "dependencies": { "safer-buffer": ">= 2.1.2 < 3.0.0" } }, "sha512-4fCk79wshMdzMp2rH06qWrJE4iolqLhCUH+OiuIgU++RB0+94NlDL81atO7GX55uUKueo0txHNtvEyI6D7WdMw=="],
+
+    "import-meta-resolve": ["import-meta-resolve@4.1.0", "", {}, "sha512-I6fiaX09Xivtk+THaMfAwnA3MVA5Big1WHF1Dfx9hFuvNIWpXnorlkzhcQf6ehrqQiiZECRt1poOAkPmer3ruw=="],
+
+    "inline-style-parser": ["inline-style-parser@0.2.4", "", {}, "sha512-0aO8FkhNZlj/ZIbNi7Lxxr12obT7cL1moPfE4tg1LkX7LlLfC6DeX4l2ZEud1ukP9jNQyNnfzQVqwbwmAATY4Q=="],
+
+    "internmap": ["internmap@2.0.3", "", {}, "sha512-5Hh7Y1wQbvY5ooGgPbDaL5iYLAPzMTUrjMulskHLH6wnv/A+1q5rgEaiuqEjB+oxGXIVZs1FF+R/KPN3ZSQYYg=="],
+
+    "iron-webcrypto": ["iron-webcrypto@1.2.1", "", {}, "sha512-feOM6FaSr6rEABp/eDfVseKyTMDt+KGpeB35SkVn9Tyn0CqvVsY3EwI0v5i8nMHyJnzCIQf7nsy3p41TPkJZhg=="],
+
+    "is-absolute-url": ["is-absolute-url@4.0.1", "", {}, "sha512-/51/TKE88Lmm7Gc4/8btclNXWS+g50wXhYJq8HWIBAGUBnoAdRu1aXeh364t/O7wXDAcTJDP8PNuNKWUDWie+A=="],
+
+    "is-alphabetical": ["is-alphabetical@2.0.1", "", {}, "sha512-FWyyY60MeTNyeSRpkM2Iry0G9hpr7/9kD40mD/cGQEuilcZYS4okz8SN2Q6rLCJ8gbCt6fN+rC+6tMGS99LaxQ=="],
+
+    "is-alphanumerical": ["is-alphanumerical@2.0.1", "", { "dependencies": { "is-alphabetical": "^2.0.0", "is-decimal": "^2.0.0" } }, "sha512-hmbYhX/9MUMF5uh7tOXyK/n0ZvWpad5caBA17GsC6vyuCqaWliRG5K1qS9inmUhEMaOBIW7/whAnSwveW/LtZw=="],
+
+    "is-arrayish": ["is-arrayish@0.3.2", "", {}, "sha512-eVRqCvVlZbuw3GrM63ovNSNAeA1K16kaR/LRY/92w0zxQ5/1YzwblUX652i4Xs9RwAGjW9d9y6X88t8OaAJfWQ=="],
+
+    "is-decimal": ["is-decimal@2.0.1", "", {}, "sha512-AAB9hiomQs5DXWcRB1rqsxGUstbRroFOPPVAomNk/3XHR5JyEZChOyTWe2oayKnsSsr/kcGqF+z6yuH6HHpN0A=="],
+
+    "is-docker": ["is-docker@3.0.0", "", { "bin": "cli.js" }, "sha512-eljcgEDlEns/7AXFosB5K/2nCM4P7FQPkGc/DWLy5rmFEWvZayGrik1d9/QIY5nJ4f9YsVvBkA6kJpHn9rISdQ=="],
+
+    "is-extendable": ["is-extendable@0.1.1", "", {}, "sha512-5BMULNob1vgFX6EjQw5izWDxrecWK9AM72rugNr0TFldMOi0fj6Jk+zeKIt0xGj4cEfQIJth4w3OKWOJ4f+AFw=="],
+
+    "is-fullwidth-code-point": ["is-fullwidth-code-point@3.0.0", "", {}, "sha512-zymm5+u+sCsSWyD9qNaejV3DFvhCKclKdizYaJUuHA83RLjb7nSuGnddCHGv0hk+KY7BMAlsWeK4Ueg6EV6XQg=="],
+
+    "is-hexadecimal": ["is-hexadecimal@2.0.1", "", {}, "sha512-DgZQp241c8oO6cA1SbTEWiXeoxV42vlcJxgH+B3hi1AiqqKruZR3ZGF8In3fj4+/y/7rHvlOZLZtgJ/4ttYGZg=="],
+
+    "is-inside-container": ["is-inside-container@1.0.0", "", { "dependencies": { "is-docker": "^3.0.0" }, "bin": "cli.js" }, "sha512-KIYLCCJghfHZxqjYBE7rEy0OBuTd5xCHS7tHVgvCLkx7StIoaxwNW3hCALgEUjFfeRk+MG/Qxmp/vtETEF3tRA=="],
+
+    "is-number": ["is-number@7.0.0", "", {}, "sha512-41Cifkg6e8TylSpdtTpeLVMqvSBEVzTttHvERD741+pnZ8ANv0004MRL43QKPDlK9cGvNp6NZWZUBlbGXYxxng=="],
+
+    "is-plain-obj": ["is-plain-obj@4.1.0", "", {}, "sha512-+Pgi+vMuUNkJyExiMBt5IlFoMyKnr5zhJ4Uspz58WOhBF5QoIZkFyNHIbBAtHwzVAgk5RtndVNsDRN61/mmDqg=="],
+
+    "is-wsl": ["is-wsl@3.1.0", "", { "dependencies": { "is-inside-container": "^1.0.0" } }, "sha512-UcVfVfaK4Sc4m7X3dUSoHoozQGBEFeDC+zVo06t98xe8CzHSZZBekNXH+tu0NalHolcJ/QAGqS46Hef7QXBIMw=="],
+
+    "js-yaml": ["js-yaml@4.1.0", "", { "dependencies": { "argparse": "^2.0.1" }, "bin": "bin/js-yaml.js" }, "sha512-wpxZs9NoxZaJESJGIZTyDEaYpl0FKSA+FB9aJiyemKhMwkxQg63h4T1KJgUGHpTqPDNRcmmYLugrRjJlBtWvRA=="],
+
+    "kind-of": ["kind-of@6.0.3", "", {}, "sha512-dcS1ul+9tmeD95T+x28/ehLgd9mENa3LsvDTtzm3vyBEO7RPptvAD+t44WVXaUjTBRcrpFeFlC8WCruUR456hw=="],
+
+    "kleur": ["kleur@4.1.5", "", {}, "sha512-o+NO+8WrRiQEE4/7nwRJhN1HWpVmJm511pBHUxPLtp0BUISzlBplORYSmTclCnJvQq2tKu/sgl3xVpkc7ZWuQQ=="],
+
+    "klona": ["klona@2.0.6", "", {}, "sha512-dhG34DXATL5hSxJbIexCft8FChFXtmskoZYnoPWjXQuebWYCNkVeV3KkGegCK9CP1oswI/vQibS2GY7Em/sJJA=="],
+
+    "longest-streak": ["longest-streak@3.1.0", "", {}, "sha512-9Ri+o0JYgehTaVBBDoMqIl8GXtbWg711O3srftcHhZ0dqnETqLaoIK0x17fUw9rFSlK/0NlsKe0Ahhyl5pXE2g=="],
+
+    "lru-cache": ["lru-cache@10.4.3", "", {}, "sha512-JNAzZcXrCt42VGLuYz0zfAzDfAvJWW6AfYlDBQyDV5DClI2m5sAmK+OIO7s59XfsRsWHp02jAJrRadPRGTt6SQ=="],
+
+    "magic-string": ["magic-string@0.30.17", "", { "dependencies": { "@jridgewell/sourcemap-codec": "^1.5.0" } }, "sha512-sNPKHvyjVf7gyjwS4xGTaW/mCnF8wnjtifKBEhxfZ7E/S8tQ0rssrwGNn6q8JH/ohItJfSQp9mBtQYuTlH5QnA=="],
+
+    "magicast": ["magicast@0.3.5", "", { "dependencies": { "@babel/parser": "^7.25.4", "@babel/types": "^7.25.4", "source-map-js": "^1.2.0" } }, "sha512-L0WhttDl+2BOsybvEOLK7fW3UA0OQ0IQ2d6Zl2x/a6vVRs3bAY0ECOSHHeL5jD+SbOpOCUEi0y1DgHEn9Qn1AQ=="],
+
+    "markdown-extensions": ["markdown-extensions@2.0.0", "", {}, "sha512-o5vL7aDWatOTX8LzaS1WMoaoxIiLRQJuIKKe2wAw6IeULDHaqbiqiggmx+pKvZDb1Sj+pE46Sn1T7lCqfFtg1Q=="],
+
+    "markdown-table": ["markdown-table@3.0.4", "", {}, "sha512-wiYz4+JrLyb/DqW2hkFJxP7Vd7JuTDm77fvbM8VfEQdmSMqcImWeeRbHwZjBjIFki/VaMK2BhFi7oUUZeM5bqw=="],
+
+    "mdast-util-definitions": ["mdast-util-definitions@6.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "@types/unist": "^3.0.0", "unist-util-visit": "^5.0.0" } }, "sha512-scTllyX6pnYNZH/AIp/0ePz6s4cZtARxImwoPJ7kS42n+MnVsI4XbnG6d4ibehRIldYMWM2LD7ImQblVhUejVQ=="],
+
+    "mdast-util-directive": ["mdast-util-directive@3.1.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "@types/unist": "^3.0.0", "ccount": "^2.0.0", "devlop": "^1.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0", "parse-entities": "^4.0.0", "stringify-entities": "^4.0.0", "unist-util-visit-parents": "^6.0.0" } }, "sha512-I3fNFt+DHmpWCYAT7quoM6lHf9wuqtI+oCOfvILnoicNIqjh5E3dEJWiXuYME2gNe8vl1iMQwyUHa7bgFmak6Q=="],
+
+    "mdast-util-find-and-replace": ["mdast-util-find-and-replace@3.0.2", "", { "dependencies": { "@types/mdast": "^4.0.0", "escape-string-regexp": "^5.0.0", "unist-util-is": "^6.0.0", "unist-util-visit-parents": "^6.0.0" } }, "sha512-Tmd1Vg/m3Xz43afeNxDIhWRtFZgM2VLyaf4vSTYwudTyeuTneoL3qtWMA5jeLyz/O1vDJmmV4QuScFCA2tBPwg=="],
+
+    "mdast-util-from-markdown": ["mdast-util-from-markdown@2.0.2", "", { "dependencies": { "@types/mdast": "^4.0.0", "@types/unist": "^3.0.0", "decode-named-character-reference": "^1.0.0", "devlop": "^1.0.0", "mdast-util-to-string": "^4.0.0", "micromark": "^4.0.0", "micromark-util-decode-numeric-character-reference": "^2.0.0", "micromark-util-decode-string": "^2.0.0", "micromark-util-normalize-identifier": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "unist-util-stringify-position": "^4.0.0" } }, "sha512-uZhTV/8NBuw0WHkPTrCqDOl0zVe1BIng5ZtHoDk49ME1qqcjYmmLmOf0gELgcRMxN4w2iuIeVso5/6QymSrgmA=="],
+
+    "mdast-util-gfm": ["mdast-util-gfm@3.1.0", "", { "dependencies": { "mdast-util-from-markdown": "^2.0.0", "mdast-util-gfm-autolink-literal": "^2.0.0", "mdast-util-gfm-footnote": "^2.0.0", "mdast-util-gfm-strikethrough": "^2.0.0", "mdast-util-gfm-table": "^2.0.0", "mdast-util-gfm-task-list-item": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-0ulfdQOM3ysHhCJ1p06l0b0VKlhU0wuQs3thxZQagjcjPrlFRqY215uZGHHJan9GEAXd9MbfPjFJz+qMkVR6zQ=="],
+
+    "mdast-util-gfm-autolink-literal": ["mdast-util-gfm-autolink-literal@2.0.1", "", { "dependencies": { "@types/mdast": "^4.0.0", "ccount": "^2.0.0", "devlop": "^1.0.0", "mdast-util-find-and-replace": "^3.0.0", "micromark-util-character": "^2.0.0" } }, "sha512-5HVP2MKaP6L+G6YaxPNjuL0BPrq9orG3TsrZ9YXbA3vDw/ACI4MEsnoDpn6ZNm7GnZgtAcONJyPhOP8tNJQavQ=="],
+
+    "mdast-util-gfm-footnote": ["mdast-util-gfm-footnote@2.1.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "devlop": "^1.1.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0", "micromark-util-normalize-identifier": "^2.0.0" } }, "sha512-sqpDWlsHn7Ac9GNZQMeUzPQSMzR6Wv0WKRNvQRg0KqHh02fpTz69Qc1QSseNX29bhz1ROIyNyxExfawVKTm1GQ=="],
+
+    "mdast-util-gfm-strikethrough": ["mdast-util-gfm-strikethrough@2.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-mKKb915TF+OC5ptj5bJ7WFRPdYtuHv0yTRxK2tJvi+BDqbkiG7h7u/9SI89nRAYcmap2xHQL9D+QG/6wSrTtXg=="],
+
+    "mdast-util-gfm-table": ["mdast-util-gfm-table@2.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "devlop": "^1.0.0", "markdown-table": "^3.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-78UEvebzz/rJIxLvE7ZtDd/vIQ0RHv+3Mh5DR96p7cS7HsBhYIICDBCu8csTNWNO6tBWfqXPWekRuj2FNOGOZg=="],
+
+    "mdast-util-gfm-task-list-item": ["mdast-util-gfm-task-list-item@2.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "devlop": "^1.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-IrtvNvjxC1o06taBAVJznEnkiHxLFTzgonUdy8hzFVeDun0uTjxxrRGVaNFqkU1wJR3RBPEfsxmU6jDWPofrTQ=="],
+
+    "mdast-util-mdx": ["mdast-util-mdx@3.0.0", "", { "dependencies": { "mdast-util-from-markdown": "^2.0.0", "mdast-util-mdx-expression": "^2.0.0", "mdast-util-mdx-jsx": "^3.0.0", "mdast-util-mdxjs-esm": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-JfbYLAW7XnYTTbUsmpu0kdBUVe+yKVJZBItEjwyYJiDJuZ9w4eeaqks4HQO+R7objWgS2ymV60GYpI14Ug554w=="],
+
+    "mdast-util-mdx-expression": ["mdast-util-mdx-expression@2.0.1", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "devlop": "^1.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-J6f+9hUp+ldTZqKRSg7Vw5V6MqjATc+3E4gf3CFNcuZNWD8XdyI6zQ8GqH7f8169MM6P7hMBRDVGnn7oHB9kXQ=="],
+
+    "mdast-util-mdx-jsx": ["mdast-util-mdx-jsx@3.2.0", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "@types/unist": "^3.0.0", "ccount": "^2.0.0", "devlop": "^1.1.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0", "parse-entities": "^4.0.0", "stringify-entities": "^4.0.0", "unist-util-stringify-position": "^4.0.0", "vfile-message": "^4.0.0" } }, "sha512-lj/z8v0r6ZtsN/cGNNtemmmfoLAFZnjMbNyLzBafjzikOM+glrjNHPlf6lQDOTccj9n5b0PPihEBbhneMyGs1Q=="],
+
+    "mdast-util-mdxjs-esm": ["mdast-util-mdxjs-esm@2.0.1", "", { "dependencies": { "@types/estree-jsx": "^1.0.0", "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "devlop": "^1.0.0", "mdast-util-from-markdown": "^2.0.0", "mdast-util-to-markdown": "^2.0.0" } }, "sha512-EcmOpxsZ96CvlP03NghtH1EsLtr0n9Tm4lPUJUBccV9RwUOneqSycg19n5HGzCf+10LozMRSObtVr3ee1WoHtg=="],
+
+    "mdast-util-phrasing": ["mdast-util-phrasing@4.1.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "unist-util-is": "^6.0.0" } }, "sha512-TqICwyvJJpBwvGAMZjj4J2n0X8QWp21b9l0o7eXyVJ25YNWYbJDVIyD1bZXE6WtV6RmKJVYmQAKWa0zWOABz2w=="],
+
+    "mdast-util-to-hast": ["mdast-util-to-hast@13.2.0", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "@ungap/structured-clone": "^1.0.0", "devlop": "^1.0.0", "micromark-util-sanitize-uri": "^2.0.0", "trim-lines": "^3.0.0", "unist-util-position": "^5.0.0", "unist-util-visit": "^5.0.0", "vfile": "^6.0.0" } }, "sha512-QGYKEuUsYT9ykKBCMOEDLsU5JRObWQusAolFMeko/tYPufNkRffBAQjIE+99jbA87xv6FgmjLtwjh9wBWajwAA=="],
+
+    "mdast-util-to-markdown": ["mdast-util-to-markdown@2.1.2", "", { "dependencies": { "@types/mdast": "^4.0.0", "@types/unist": "^3.0.0", "longest-streak": "^3.0.0", "mdast-util-phrasing": "^4.0.0", "mdast-util-to-string": "^4.0.0", "micromark-util-classify-character": "^2.0.0", "micromark-util-decode-string": "^2.0.0", "unist-util-visit": "^5.0.0", "zwitch": "^2.0.0" } }, "sha512-xj68wMTvGXVOKonmog6LwyJKrYXZPvlwabaryTjLh9LuvovB/KAH+kvi8Gjj+7rJjsFi23nkUxRQv1KqSroMqA=="],
+
+    "mdast-util-to-string": ["mdast-util-to-string@4.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0" } }, "sha512-0H44vDimn51F0YwvxSJSm0eCDOJTRlmN0R1yBh4HLj9wiV1Dn0QoXGbvFAWj2hSItVTlCmBF1hqKlIyUBVFLPg=="],
+
+    "mdn-data": ["mdn-data@2.12.2", "", {}, "sha512-IEn+pegP1aManZuckezWCO+XZQDplx1366JoVhTpMpBB1sPey/SbveZQUosKiKiGYjg1wH4pMlNgXbCiYgihQA=="],
+
+    "micromark": ["micromark@4.0.2", "", { "dependencies": { "@types/debug": "^4.0.0", "debug": "^4.0.0", "decode-named-character-reference": "^1.0.0", "devlop": "^1.0.0", "micromark-core-commonmark": "^2.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-chunked": "^2.0.0", "micromark-util-combine-extensions": "^2.0.0", "micromark-util-decode-numeric-character-reference": "^2.0.0", "micromark-util-encode": "^2.0.0", "micromark-util-normalize-identifier": "^2.0.0", "micromark-util-resolve-all": "^2.0.0", "micromark-util-sanitize-uri": "^2.0.0", "micromark-util-subtokenize": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-zpe98Q6kvavpCr1NPVSCMebCKfD7CA2NqZ+rykeNhONIJBpc1tFKt9hucLGwha3jNTNI8lHpctWJWoimVF4PfA=="],
+
+    "micromark-core-commonmark": ["micromark-core-commonmark@2.0.3", "", { "dependencies": { "decode-named-character-reference": "^1.0.0", "devlop": "^1.0.0", "micromark-factory-destination": "^2.0.0", "micromark-factory-label": "^2.0.0", "micromark-factory-space": "^2.0.0", "micromark-factory-title": "^2.0.0", "micromark-factory-whitespace": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-chunked": "^2.0.0", "micromark-util-classify-character": "^2.0.0", "micromark-util-html-tag-name": "^2.0.0", "micromark-util-normalize-identifier": "^2.0.0", "micromark-util-resolve-all": "^2.0.0", "micromark-util-subtokenize": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-RDBrHEMSxVFLg6xvnXmb1Ayr2WzLAWjeSATAoxwKYJV94TeNavgoIdA0a9ytzDSVzBy2YKFK+emCPOEibLeCrg=="],
+
+    "micromark-extension-directive": ["micromark-extension-directive@3.0.2", "", { "dependencies": { "devlop": "^1.0.0", "micromark-factory-space": "^2.0.0", "micromark-factory-whitespace": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "parse-entities": "^4.0.0" } }, "sha512-wjcXHgk+PPdmvR58Le9d7zQYWy+vKEU9Se44p2CrCDPiLr2FMyiT4Fyb5UFKFC66wGB3kPlgD7q3TnoqPS7SZA=="],
+
+    "micromark-extension-gfm": ["micromark-extension-gfm@3.0.0", "", { "dependencies": { "micromark-extension-gfm-autolink-literal": "^2.0.0", "micromark-extension-gfm-footnote": "^2.0.0", "micromark-extension-gfm-strikethrough": "^2.0.0", "micromark-extension-gfm-table": "^2.0.0", "micromark-extension-gfm-tagfilter": "^2.0.0", "micromark-extension-gfm-task-list-item": "^2.0.0", "micromark-util-combine-extensions": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-vsKArQsicm7t0z2GugkCKtZehqUm31oeGBV/KVSorWSy8ZlNAv7ytjFhvaryUiCUJYqs+NoE6AFhpQvBTM6Q4w=="],
+
+    "micromark-extension-gfm-autolink-literal": ["micromark-extension-gfm-autolink-literal@2.1.0", "", { "dependencies": { "micromark-util-character": "^2.0.0", "micromark-util-sanitize-uri": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-oOg7knzhicgQ3t4QCjCWgTmfNhvQbDDnJeVu9v81r7NltNCVmhPy1fJRX27pISafdjL+SVc4d3l48Gb6pbRypw=="],
+
+    "micromark-extension-gfm-footnote": ["micromark-extension-gfm-footnote@2.1.0", "", { "dependencies": { "devlop": "^1.0.0", "micromark-core-commonmark": "^2.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-normalize-identifier": "^2.0.0", "micromark-util-sanitize-uri": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-/yPhxI1ntnDNsiHtzLKYnE3vf9JZ6cAisqVDauhp4CEHxlb4uoOTxOCJ+9s51bIB8U1N1FJ1RXOKTIlD5B/gqw=="],
+
+    "micromark-extension-gfm-strikethrough": ["micromark-extension-gfm-strikethrough@2.1.0", "", { "dependencies": { "devlop": "^1.0.0", "micromark-util-chunked": "^2.0.0", "micromark-util-classify-character": "^2.0.0", "micromark-util-resolve-all": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-ADVjpOOkjz1hhkZLlBiYA9cR2Anf8F4HqZUO6e5eDcPQd0Txw5fxLzzxnEkSkfnD0wziSGiv7sYhk/ktvbf1uw=="],
+
+    "micromark-extension-gfm-table": ["micromark-extension-gfm-table@2.1.1", "", { "dependencies": { "devlop": "^1.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-t2OU/dXXioARrC6yWfJ4hqB7rct14e8f7m0cbI5hUmDyyIlwv5vEtooptH8INkbLzOatzKuVbQmAYcbWoyz6Dg=="],
+
+    "micromark-extension-gfm-tagfilter": ["micromark-extension-gfm-tagfilter@2.0.0", "", { "dependencies": { "micromark-util-types": "^2.0.0" } }, "sha512-xHlTOmuCSotIA8TW1mDIM6X2O1SiX5P9IuDtqGonFhEK0qgRI4yeC6vMxEV2dgyr2TiD+2PQ10o+cOhdVAcwfg=="],
+
+    "micromark-extension-gfm-task-list-item": ["micromark-extension-gfm-task-list-item@2.1.0", "", { "dependencies": { "devlop": "^1.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-qIBZhqxqI6fjLDYFTBIa4eivDMnP+OZqsNwmQ3xNLE4Cxwc+zfQEfbs6tzAo2Hjq+bh6q5F+Z8/cksrLFYWQQw=="],
+
+    "micromark-extension-mdx-expression": ["micromark-extension-mdx-expression@3.0.1", "", { "dependencies": { "@types/estree": "^1.0.0", "devlop": "^1.0.0", "micromark-factory-mdx-expression": "^2.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-events-to-acorn": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-dD/ADLJ1AeMvSAKBwO22zG22N4ybhe7kFIZ3LsDI0GlsNr2A3KYxb0LdC1u5rj4Nw+CHKY0RVdnHX8vj8ejm4Q=="],
+
+    "micromark-extension-mdx-jsx": ["micromark-extension-mdx-jsx@3.0.2", "", { "dependencies": { "@types/estree": "^1.0.0", "devlop": "^1.0.0", "estree-util-is-identifier-name": "^3.0.0", "micromark-factory-mdx-expression": "^2.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-events-to-acorn": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "vfile-message": "^4.0.0" } }, "sha512-e5+q1DjMh62LZAJOnDraSSbDMvGJ8x3cbjygy2qFEi7HCeUT4BDKCvMozPozcD6WmOt6sVvYDNBKhFSz3kjOVQ=="],
+
+    "micromark-extension-mdx-md": ["micromark-extension-mdx-md@2.0.0", "", { "dependencies": { "micromark-util-types": "^2.0.0" } }, "sha512-EpAiszsB3blw4Rpba7xTOUptcFeBFi+6PY8VnJ2hhimH+vCQDirWgsMpz7w1XcZE7LVrSAUGb9VJpG9ghlYvYQ=="],
+
+    "micromark-extension-mdxjs": ["micromark-extension-mdxjs@3.0.0", "", { "dependencies": { "acorn": "^8.0.0", "acorn-jsx": "^5.0.0", "micromark-extension-mdx-expression": "^3.0.0", "micromark-extension-mdx-jsx": "^3.0.0", "micromark-extension-mdx-md": "^2.0.0", "micromark-extension-mdxjs-esm": "^3.0.0", "micromark-util-combine-extensions": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-A873fJfhnJ2siZyUrJ31l34Uqwy4xIFmvPY1oj+Ean5PHcPBYzEsvqvWGaWcfEIr11O5Dlw3p2y0tZWpKHDejQ=="],
+
+    "micromark-extension-mdxjs-esm": ["micromark-extension-mdxjs-esm@3.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "devlop": "^1.0.0", "micromark-core-commonmark": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-events-to-acorn": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "unist-util-position-from-estree": "^2.0.0", "vfile-message": "^4.0.0" } }, "sha512-DJFl4ZqkErRpq/dAPyeWp15tGrcrrJho1hKK5uBS70BCtfrIFg81sqcTVu3Ta+KD1Tk5vAtBNElWxtAa+m8K9A=="],
+
+    "micromark-factory-destination": ["micromark-factory-destination@2.0.1", "", { "dependencies": { "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-Xe6rDdJlkmbFRExpTOmRj9N3MaWmbAgdpSrBQvCFqhezUn4AHqJHbaEnfbVYYiexVSs//tqOdY/DxhjdCiJnIA=="],
+
+    "micromark-factory-label": ["micromark-factory-label@2.0.1", "", { "dependencies": { "devlop": "^1.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-VFMekyQExqIW7xIChcXn4ok29YE3rnuyveW3wZQWWqF4Nv9Wk5rgJ99KzPvHjkmPXF93FXIbBp6YdW3t71/7Vg=="],
+
+    "micromark-factory-mdx-expression": ["micromark-factory-mdx-expression@2.0.3", "", { "dependencies": { "@types/estree": "^1.0.0", "devlop": "^1.0.0", "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-events-to-acorn": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "unist-util-position-from-estree": "^2.0.0", "vfile-message": "^4.0.0" } }, "sha512-kQnEtA3vzucU2BkrIa8/VaSAsP+EJ3CKOvhMuJgOEGg9KDC6OAY6nSnNDVRiVNRqj7Y4SlSzcStaH/5jge8JdQ=="],
+
+    "micromark-factory-space": ["micromark-factory-space@2.0.1", "", { "dependencies": { "micromark-util-character": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-zRkxjtBxxLd2Sc0d+fbnEunsTj46SWXgXciZmHq0kDYGnck/ZSGj9/wULTV95uoeYiK5hRXP2mJ98Uo4cq/LQg=="],
+
+    "micromark-factory-title": ["micromark-factory-title@2.0.1", "", { "dependencies": { "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-5bZ+3CjhAd9eChYTHsjy6TGxpOFSKgKKJPJxr293jTbfry2KDoWkhBb6TcPVB4NmzaPhMs1Frm9AZH7OD4Cjzw=="],
+
+    "micromark-factory-whitespace": ["micromark-factory-whitespace@2.0.1", "", { "dependencies": { "micromark-factory-space": "^2.0.0", "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-Ob0nuZ3PKt/n0hORHyvoD9uZhr+Za8sFoP+OnMcnWK5lngSzALgQYKMr9RJVOWLqQYuyn6ulqGWSXdwf6F80lQ=="],
+
+    "micromark-util-character": ["micromark-util-character@2.1.1", "", { "dependencies": { "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-wv8tdUTJ3thSFFFJKtpYKOYiGP2+v96Hvk4Tu8KpCAsTMs6yi+nVmGh1syvSCsaxz45J6Jbw+9DD6g97+NV67Q=="],
+
+    "micromark-util-chunked": ["micromark-util-chunked@2.0.1", "", { "dependencies": { "micromark-util-symbol": "^2.0.0" } }, "sha512-QUNFEOPELfmvv+4xiNg2sRYeS/P84pTW0TCgP5zc9FpXetHY0ab7SxKyAQCNCc1eK0459uoLI1y5oO5Vc1dbhA=="],
+
+    "micromark-util-classify-character": ["micromark-util-classify-character@2.0.1", "", { "dependencies": { "micromark-util-character": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-K0kHzM6afW/MbeWYWLjoHQv1sgg2Q9EccHEDzSkxiP/EaagNzCm7T/WMKZ3rjMbvIpvBiZgwR3dKMygtA4mG1Q=="],
+
+    "micromark-util-combine-extensions": ["micromark-util-combine-extensions@2.0.1", "", { "dependencies": { "micromark-util-chunked": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-OnAnH8Ujmy59JcyZw8JSbK9cGpdVY44NKgSM7E9Eh7DiLS2E9RNQf0dONaGDzEG9yjEl5hcqeIsj4hfRkLH/Bg=="],
+
+    "micromark-util-decode-numeric-character-reference": ["micromark-util-decode-numeric-character-reference@2.0.2", "", { "dependencies": { "micromark-util-symbol": "^2.0.0" } }, "sha512-ccUbYk6CwVdkmCQMyr64dXz42EfHGkPQlBj5p7YVGzq8I7CtjXZJrubAYezf7Rp+bjPseiROqe7G6foFd+lEuw=="],
+
+    "micromark-util-decode-string": ["micromark-util-decode-string@2.0.1", "", { "dependencies": { "decode-named-character-reference": "^1.0.0", "micromark-util-character": "^2.0.0", "micromark-util-decode-numeric-character-reference": "^2.0.0", "micromark-util-symbol": "^2.0.0" } }, "sha512-nDV/77Fj6eH1ynwscYTOsbK7rR//Uj0bZXBwJZRfaLEJ1iGBR6kIfNmlNqaqJf649EP0F3NWNdeJi03elllNUQ=="],
+
+    "micromark-util-encode": ["micromark-util-encode@2.0.1", "", {}, "sha512-c3cVx2y4KqUnwopcO9b/SCdo2O67LwJJ/UyqGfbigahfegL9myoEFoDYZgkT7f36T0bLrM9hZTAaAyH+PCAXjw=="],
+
+    "micromark-util-events-to-acorn": ["micromark-util-events-to-acorn@2.0.3", "", { "dependencies": { "@types/estree": "^1.0.0", "@types/unist": "^3.0.0", "devlop": "^1.0.0", "estree-util-visit": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0", "vfile-message": "^4.0.0" } }, "sha512-jmsiEIiZ1n7X1Rr5k8wVExBQCg5jy4UXVADItHmNk1zkwEVhBuIUKRu3fqv+hs4nxLISi2DQGlqIOGiFxgbfHg=="],
+
+    "micromark-util-html-tag-name": ["micromark-util-html-tag-name@2.0.1", "", {}, "sha512-2cNEiYDhCWKI+Gs9T0Tiysk136SnR13hhO8yW6BGNyhOC4qYFnwF1nKfD3HFAIXA5c45RrIG1ub11GiXeYd1xA=="],
+
+    "micromark-util-normalize-identifier": ["micromark-util-normalize-identifier@2.0.1", "", { "dependencies": { "micromark-util-symbol": "^2.0.0" } }, "sha512-sxPqmo70LyARJs0w2UclACPUUEqltCkJ6PhKdMIDuJ3gSf/Q+/GIe3WKl0Ijb/GyH9lOpUkRAO2wp0GVkLvS9Q=="],
+
+    "micromark-util-resolve-all": ["micromark-util-resolve-all@2.0.1", "", { "dependencies": { "micromark-util-types": "^2.0.0" } }, "sha512-VdQyxFWFT2/FGJgwQnJYbe1jjQoNTS4RjglmSjTUlpUMa95Htx9NHeYW4rGDJzbjvCsl9eLjMQwGeElsqmzcHg=="],
+
+    "micromark-util-sanitize-uri": ["micromark-util-sanitize-uri@2.0.1", "", { "dependencies": { "micromark-util-character": "^2.0.0", "micromark-util-encode": "^2.0.0", "micromark-util-symbol": "^2.0.0" } }, "sha512-9N9IomZ/YuGGZZmQec1MbgxtlgougxTodVwDzzEouPKo3qFWvymFHWcnDi2vzV1ff6kas9ucW+o3yzJK9YB1AQ=="],
+
+    "micromark-util-subtokenize": ["micromark-util-subtokenize@2.1.0", "", { "dependencies": { "devlop": "^1.0.0", "micromark-util-chunked": "^2.0.0", "micromark-util-symbol": "^2.0.0", "micromark-util-types": "^2.0.0" } }, "sha512-XQLu552iSctvnEcgXw6+Sx75GflAPNED1qx7eBJ+wydBb2KCbRZe+NwvIEEMM83uml1+2WSXpBAcp9IUCgCYWA=="],
+
+    "micromark-util-symbol": ["micromark-util-symbol@2.0.1", "", {}, "sha512-vs5t8Apaud9N28kgCrRUdEed4UJ+wWNvicHLPxCa9ENlYuAY31M0ETy5y1vA33YoNPDFTghEbnh6efaE8h4x0Q=="],
+
+    "micromark-util-types": ["micromark-util-types@2.0.2", "", {}, "sha512-Yw0ECSpJoViF1qTU4DC6NwtC4aWGt1EkzaQB8KPPyCRR8z9TWeV0HbEFGTO+ZY1wB22zmxnJqhPyTpOVCpeHTA=="],
+
+    "micromatch": ["micromatch@4.0.8", "", { "dependencies": { "braces": "^3.0.3", "picomatch": "^2.3.1" } }, "sha512-PXwfBhYu0hBCPw8Dn0E+WDYb7af3dSLVWKi3HGv84IdF4TyFoC0ysxFd0Goxw7nSv4T/PzEJQxsYsEiFCKo2BA=="],
+
+    "mrmime": ["mrmime@2.0.1", "", {}, "sha512-Y3wQdFg2Va6etvQ5I82yUhGdsKrcYox6p7FfL1LbK2J4V01F9TGlepTIhnK24t7koZibmg82KGglhA1XK5IsLQ=="],
+
+    "ms": ["ms@2.1.3", "", {}, "sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA=="],
+
+    "nanoid": ["nanoid@3.3.11", "", { "bin": "bin/nanoid.cjs" }, "sha512-N8SpfPUnUp1bK+PMYW8qSWdl9U+wwNWI4QKxOYDy9JAro3WMX7p2OeVRF9v+347pnakNevPmiHhNmZ2HbFA76w=="],
+
+    "neotraverse": ["neotraverse@0.6.18", "", {}, "sha512-Z4SmBUweYa09+o6pG+eASabEpP6QkQ70yHj351pQoEXIs8uHbaU2DWVmzBANKgflPa47A50PtB2+NgRpQvr7vA=="],
+
+    "nlcst-to-string": ["nlcst-to-string@4.0.0", "", { "dependencies": { "@types/nlcst": "^2.0.0" } }, "sha512-YKLBCcUYKAg0FNlOBT6aI91qFmSiFKiluk655WzPF+DDMA02qIyy8uiRqI8QXtcFpEvll12LpL5MXqEmAZ+dcA=="],
+
+    "node-fetch": ["node-fetch@2.7.0", "", { "dependencies": { "whatwg-url": "^5.0.0" }, "peerDependencies": { "encoding": "^0.1.0" }, "optionalPeers": ["encoding"] }, "sha512-c4FRfUm/dbcWZ7U+1Wq0AwCyFL+3nt2bEw05wfxSz+DWpWsitgmSgYmy2dQdWyKC1694ELPqMs/YzUSNozLt8A=="],
+
+    "node-fetch-native": ["node-fetch-native@1.6.7", "", {}, "sha512-g9yhqoedzIUm0nTnTqAQvueMPVOuIY16bqgAJJC8XOOubYFNwz6IER9qs0Gq2Xd0+CecCKFjtdDTMA4u4xG06Q=="],
+
+    "node-mock-http": ["node-mock-http@1.0.2", "", {}, "sha512-zWaamgDUdo9SSLw47we78+zYw/bDr5gH8pH7oRRs8V3KmBtu8GLgGIbV2p/gRPd3LWpEOpjQj7X1FOU3VFMJ8g=="],
+
+    "normalize-path": ["normalize-path@3.0.0", "", {}, "sha512-6eZs5Ls3WtCisHWp9S2GUy8dqkpGi4BVSz3GaqiE6ezub0512ESztXUwUB6C6IKbQkY2Pnb/mD4WYojCRwcwLA=="],
+
+    "nth-check": ["nth-check@2.1.1", "", { "dependencies": { "boolbase": "^1.0.0" } }, "sha512-lqjrjmaOoAnWfMmBPL+XNnynZh2+swxiX3WUE0s4yEHI6m+AwrK2UZOimIRl3X/4QctVqS8AiZjFqyOGrMXb/w=="],
+
+    "ofetch": ["ofetch@1.4.1", "", { "dependencies": { "destr": "^2.0.3", "node-fetch-native": "^1.6.4", "ufo": "^1.5.4" } }, "sha512-QZj2DfGplQAr2oj9KzceK9Hwz6Whxazmn85yYeVuS3u9XTMOGMRx0kO95MQ+vLsj/S/NwBDMMLU5hpxvI6Tklw=="],
+
+    "ohash": ["ohash@2.0.11", "", {}, "sha512-RdR9FQrFwNBNXAr4GixM8YaRZRJ5PUWbKYbE5eOsrwAjJW0q2REGcf79oYPsLyskQCZG1PLN+S/K1V00joZAoQ=="],
+
+    "oniguruma-parser": ["oniguruma-parser@0.12.1", "", {}, "sha512-8Unqkvk1RYc6yq2WBYRj4hdnsAxVze8i7iPfQr8e4uSP3tRv0rpZcbGUDvxfQQcdwHt/e9PrMvGCsa8OqG9X3w=="],
+
+    "oniguruma-to-es": ["oniguruma-to-es@4.3.3", "", { "dependencies": { "oniguruma-parser": "^0.12.1", "regex": "^6.0.1", "regex-recursion": "^6.0.2" } }, "sha512-rPiZhzC3wXwE59YQMRDodUwwT9FZ9nNBwQQfsd1wfdtlKEyCdRV0avrTcSZ5xlIvGRVPd/cx6ZN45ECmS39xvg=="],
+
+    "p-limit": ["p-limit@6.2.0", "", { "dependencies": { "yocto-queue": "^1.1.1" } }, "sha512-kuUqqHNUqoIWp/c467RI4X6mmyuojY5jGutNU0wVTmEOOfcuwLqyMVoAi9MKi2Ak+5i9+nhmrK4ufZE8069kHA=="],
+
+    "p-queue": ["p-queue@8.1.0", "", { "dependencies": { "eventemitter3": "^5.0.1", "p-timeout": "^6.1.2" } }, "sha512-mxLDbbGIBEXTJL0zEx8JIylaj3xQ7Z/7eEVjcF9fJX4DBiH9oqe+oahYnlKKxm0Ci9TlWTyhSHgygxMxjIB2jw=="],
+
+    "p-timeout": ["p-timeout@6.1.4", "", {}, "sha512-MyIV3ZA/PmyBN/ud8vV9XzwTrNtR4jFrObymZYnZqMmW0zA8Z17vnT0rBgFE/TlohB+YCHqXMgZzb3Csp49vqg=="],
+
+    "package-manager-detector": ["package-manager-detector@1.3.0", "", {}, "sha512-ZsEbbZORsyHuO00lY1kV3/t72yp6Ysay6Pd17ZAlNGuGwmWDLCJxFpRs0IzfXfj1o4icJOkUEioexFHzyPurSQ=="],
+
+    "pagefind": ["pagefind@1.3.0", "", { "optionalDependencies": { "@pagefind/darwin-arm64": "1.3.0", "@pagefind/darwin-x64": "1.3.0", "@pagefind/linux-arm64": "1.3.0", "@pagefind/linux-x64": "1.3.0", "@pagefind/windows-x64": "1.3.0" }, "bin": "lib/runner/bin.cjs" }, "sha512-8KPLGT5g9s+olKMRTU9LFekLizkVIu9tes90O1/aigJ0T5LmyPqTzGJrETnSw3meSYg58YH7JTzhTTW/3z6VAw=="],
+
+    "pako": ["pako@0.2.9", "", {}, "sha512-NUcwaKxUxWrZLpDG+z/xZaCgQITkA/Dv4V/T6bw7VON6l1Xz/VnrBqrYjZQ12TamKHzITTfOEIYUj48y2KXImA=="],
+
+    "parse-entities": ["parse-entities@4.0.2", "", { "dependencies": { "@types/unist": "^2.0.0", "character-entities-legacy": "^3.0.0", "character-reference-invalid": "^2.0.0", "decode-named-character-reference": "^1.0.0", "is-alphanumerical": "^2.0.0", "is-decimal": "^2.0.0", "is-hexadecimal": "^2.0.0" } }, "sha512-GG2AQYWoLgL877gQIKeRPGO1xF9+eG1ujIb5soS5gPvLQ1y2o8FL90w2QWNdf9I361Mpp7726c+lj3U0qK1uGw=="],
+
+    "parse-latin": ["parse-latin@7.0.0", "", { "dependencies": { "@types/nlcst": "^2.0.0", "@types/unist": "^3.0.0", "nlcst-to-string": "^4.0.0", "unist-util-modify-children": "^4.0.0", "unist-util-visit-children": "^3.0.0", "vfile": "^6.0.0" } }, "sha512-mhHgobPPua5kZ98EF4HWiH167JWBfl4pvAIXXdbaVohtK7a6YBOy56kvhCqduqyo/f3yrHFWmqmiMg/BkBkYYQ=="],
+
+    "parse5": ["parse5@7.3.0", "", { "dependencies": { "entities": "^6.0.0" } }, "sha512-IInvU7fabl34qmi9gY8XOVxhYyMyuH2xUNpb2q8/Y+7552KlejkRvqvD19nMoUW/uQGGbqNpA6Tufu5FL5BZgw=="],
+
+    "pathe": ["pathe@1.1.2", "", {}, "sha512-whLdWMYL2TwI08hn8/ZqAbrVemu0LNaNNJZX73O6qaIdCTfXutsLhMkjdENX0qhsQ9uIimo4/aQOmXkoon2nDQ=="],
+
+    "picocolors": ["picocolors@1.1.1", "", {}, "sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA=="],
+
+    "picomatch": ["picomatch@4.0.3", "", {}, "sha512-5gTmgEY/sqK6gFXLIsQNH19lWb4ebPDLA4SdLP7dsWkIXHWlG66oPuVvXSGFPppYZz8ZDZq0dYYrbHfBCVUb1Q=="],
+
+    "postcss": ["postcss@8.5.6", "", { "dependencies": { "nanoid": "^3.3.11", "picocolors": "^1.1.1", "source-map-js": "^1.2.1" } }, "sha512-3Ybi1tAuwAP9s0r1UQ2J4n5Y0G05bJkpUIO0/bI9MhwmD70S5aTWbXGBwxHrelT+XM1k6dM0pk+SwNkpTRN7Pg=="],
+
+    "postcss-nested": ["postcss-nested@6.2.0", "", { "dependencies": { "postcss-selector-parser": "^6.1.1" }, "peerDependencies": { "postcss": "^8.2.14" } }, "sha512-HQbt28KulC5AJzG+cZtj9kvKB93CFCdLvog1WFLf1D+xmMvPGlBstkpTEZfK5+AN9hfJocyBFCNiqyS48bpgzQ=="],
+
+    "postcss-selector-parser": ["postcss-selector-parser@6.1.2", "", { "dependencies": { "cssesc": "^3.0.0", "util-deprecate": "^1.0.2" } }, "sha512-Q8qQfPiZ+THO/3ZrOrO0cJJKfpYCagtMUkXbnEfmgUjwXg6z/WBeOyS9APBBPCTSiDV+s4SwQGu8yFsiMRIudg=="],
+
+    "prismjs": ["prismjs@1.30.0", "", {}, "sha512-DEvV2ZF2r2/63V+tK8hQvrR2ZGn10srHbXviTlcv7Kpzw8jWiNTqbVgjO3IY8RxrrOUF8VPMQQFysYYYv0YZxw=="],
+
+    "prompts": ["prompts@2.4.2", "", { "dependencies": { "kleur": "^3.0.3", "sisteransi": "^1.0.5" } }, "sha512-NxNv/kLguCA7p3jE8oL2aEBsrJWgAakBpgmgK6lpPWV+WuOmY6r2/zbAVnP+T8bQlA0nzHXSJSJW0Hq7ylaD2Q=="],
+
+    "property-information": ["property-information@7.1.0", "", {}, "sha512-TwEZ+X+yCJmYfL7TPUOcvBZ4QfoT5YenQiJuX//0th53DE6w0xxLEtfK3iyryQFddXuvkIk51EEgrJQ0WJkOmQ=="],
+
+    "radix3": ["radix3@1.1.2", "", {}, "sha512-b484I/7b8rDEdSDKckSSBA8knMpcdsXudlE/LNL639wFoHKwLbEkQFZHWEYwDC0wa0FKUcCY+GAF73Z7wxNVFA=="],
+
+    "readdirp": ["readdirp@4.1.2", "", {}, "sha512-GDhwkLfywWL2s6vEjyhri+eXmfH6j1L7JE27WhqLeYzoh/A3DBaYGEj2H/HFZCn/kMfim73FXxEJTw06WtxQwg=="],
+
+    "recast": ["recast@0.23.11", "", { "dependencies": { "ast-types": "^0.16.1", "esprima": "~4.0.0", "source-map": "~0.6.1", "tiny-invariant": "^1.3.3", "tslib": "^2.0.1" } }, "sha512-YTUo+Flmw4ZXiWfQKGcwwc11KnoRAYgzAE2E7mXKCjSviTKShtxBsN6YUUBB2gtaBzKzeKunxhUwNHQuRryhWA=="],
+
+    "recma-build-jsx": ["recma-build-jsx@1.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "estree-util-build-jsx": "^3.0.0", "vfile": "^6.0.0" } }, "sha512-8GtdyqaBcDfva+GUKDr3nev3VpKAhup1+RvkMvUxURHpW7QyIvk9F5wz7Vzo06CEMSilw6uArgRqhpiUcWp8ew=="],
+
+    "recma-jsx": ["recma-jsx@1.0.1", "", { "dependencies": { "acorn-jsx": "^5.0.0", "estree-util-to-js": "^2.0.0", "recma-parse": "^1.0.0", "recma-stringify": "^1.0.0", "unified": "^11.0.0" }, "peerDependencies": { "acorn": "^6.0.0 || ^7.0.0 || ^8.0.0" } }, "sha512-huSIy7VU2Z5OLv6oFLosQGGDqPqdO1iq6bWNAdhzMxSJP7RAso4fCZ1cKu8j9YHCZf3TPrq4dw3okhrylgcd7w=="],
+
+    "recma-parse": ["recma-parse@1.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "esast-util-from-js": "^2.0.0", "unified": "^11.0.0", "vfile": "^6.0.0" } }, "sha512-OYLsIGBB5Y5wjnSnQW6t3Xg7q3fQ7FWbw/vcXtORTnyaSFscOtABg+7Pnz6YZ6c27fG1/aN8CjfwoUEUIdwqWQ=="],
+
+    "recma-stringify": ["recma-stringify@1.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "estree-util-to-js": "^2.0.0", "unified": "^11.0.0", "vfile": "^6.0.0" } }, "sha512-cjwII1MdIIVloKvC9ErQ+OgAtwHBmcZ0Bg4ciz78FtbT8In39aAYbaA7zvxQ61xVMSPE8WxhLwLbhif4Js2C+g=="],
+
+    "regex": ["regex@6.0.1", "", { "dependencies": { "regex-utilities": "^2.3.0" } }, "sha512-uorlqlzAKjKQZ5P+kTJr3eeJGSVroLKoHmquUj4zHWuR+hEyNqlXsSKlYYF5F4NI6nl7tWCs0apKJ0lmfsXAPA=="],
+
+    "regex-recursion": ["regex-recursion@6.0.2", "", { "dependencies": { "regex-utilities": "^2.3.0" } }, "sha512-0YCaSCq2VRIebiaUviZNs0cBz1kg5kVS2UKUfNIx8YVs1cN3AV7NTctO5FOKBA+UT2BPJIWZauYHPqJODG50cg=="],
+
+    "regex-utilities": ["regex-utilities@2.3.0", "", {}, "sha512-8VhliFJAWRaUiVvREIiW2NXXTmHs4vMNnSzuJVhscgmGav3g9VDxLrQndI3dZZVVdp0ZO/5v0xmX516/7M9cng=="],
+
+    "rehype": ["rehype@13.0.2", "", { "dependencies": { "@types/hast": "^3.0.0", "rehype-parse": "^9.0.0", "rehype-stringify": "^10.0.0", "unified": "^11.0.0" } }, "sha512-j31mdaRFrwFRUIlxGeuPXXKWQxet52RBQRvCmzl5eCefn/KGbomK5GMHNMsOJf55fgo3qw5tST5neDuarDYR2A=="],
+
+    "rehype-expressive-code": ["rehype-expressive-code@0.41.3", "", { "dependencies": { "expressive-code": "^0.41.3" } }, "sha512-8d9Py4c/V6I/Od2VIXFAdpiO2kc0SV2qTJsRAaqSIcM9aruW4ASLNe2kOEo1inXAAkIhpFzAHTc358HKbvpNUg=="],
+
+    "rehype-format": ["rehype-format@5.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-format": "^1.0.0" } }, "sha512-zvmVru9uB0josBVpr946OR8ui7nJEdzZobwLOOqHb/OOD88W0Vk2SqLwoVOj0fM6IPCCO6TaV9CvQvJMWwukFQ=="],
+
+    "rehype-minify-whitespace": ["rehype-minify-whitespace@6.0.2", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-minify-whitespace": "^1.0.0" } }, "sha512-Zk0pyQ06A3Lyxhe9vGtOtzz3Z0+qZ5+7icZ/PL/2x1SHPbKao5oB/g/rlc6BCTajqBb33JcOe71Ye1oFsuYbnw=="],
+
+    "rehype-parse": ["rehype-parse@9.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-from-html": "^2.0.0", "unified": "^11.0.0" } }, "sha512-ksCzCD0Fgfh7trPDxr2rSylbwq9iYDkSn8TCDmEJ49ljEUBxDVCzCHv7QNzZOfODanX4+bWQ4WZqLCRWYLfhag=="],
+
+    "rehype-raw": ["rehype-raw@7.0.0", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-raw": "^9.0.0", "vfile": "^6.0.0" } }, "sha512-/aE8hCfKlQeA8LmyeyQvQF3eBiLRGNlfBJEvWH7ivp9sBqs7TNqBL5X3v157rM4IFETqDnIOO+z5M/biZbo9Ww=="],
+
+    "rehype-recma": ["rehype-recma@1.0.0", "", { "dependencies": { "@types/estree": "^1.0.0", "@types/hast": "^3.0.0", "hast-util-to-estree": "^3.0.0" } }, "sha512-lqA4rGUf1JmacCNWWZx0Wv1dHqMwxzsDWYMTowuplHF3xH0N/MmrZ/G3BDZnzAkRmxDadujCjaKM2hqYdCBOGw=="],
+
+    "rehype-remark": ["rehype-remark@10.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "hast-util-to-mdast": "^10.0.0", "unified": "^11.0.0", "vfile": "^6.0.0" } }, "sha512-EmDndlb5NVwXGfUa4c9GPK+lXeItTilLhE6ADSaQuHr4JUlKw9MidzGzx4HpqZrNCt6vnHmEifXQiiA+CEnjYQ=="],
+
+    "rehype-stringify": ["rehype-stringify@10.0.1", "", { "dependencies": { "@types/hast": "^3.0.0", "hast-util-to-html": "^9.0.0", "unified": "^11.0.0" } }, "sha512-k9ecfXHmIPuFVI61B9DeLPN0qFHfawM6RsuX48hoqlaKSF61RskNjSm1lI8PhBEM0MRdLxVVm4WmTqJQccH9mA=="],
+
+    "remark-directive": ["remark-directive@3.0.1", "", { "dependencies": { "@types/mdast": "^4.0.0", "mdast-util-directive": "^3.0.0", "micromark-extension-directive": "^3.0.0", "unified": "^11.0.0" } }, "sha512-gwglrEQEZcZYgVyG1tQuA+h58EZfq5CSULw7J90AFuCTyib1thgHPoqQ+h9iFvU6R+vnZ5oNFQR5QKgGpk741A=="],
+
+    "remark-gfm": ["remark-gfm@4.0.1", "", { "dependencies": { "@types/mdast": "^4.0.0", "mdast-util-gfm": "^3.0.0", "micromark-extension-gfm": "^3.0.0", "remark-parse": "^11.0.0", "remark-stringify": "^11.0.0", "unified": "^11.0.0" } }, "sha512-1quofZ2RQ9EWdeN34S79+KExV1764+wCUGop5CPL1WGdD0ocPpu91lzPGbwWMECpEpd42kJGQwzRfyov9j4yNg=="],
+
+    "remark-mdx": ["remark-mdx@3.1.0", "", { "dependencies": { "mdast-util-mdx": "^3.0.0", "micromark-extension-mdxjs": "^3.0.0" } }, "sha512-Ngl/H3YXyBV9RcRNdlYsZujAmhsxwzxpDzpDEhFBVAGthS4GDgnctpDjgFl/ULx5UEDzqtW1cyBSNKqYYrqLBA=="],
+
+    "remark-parse": ["remark-parse@11.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "mdast-util-from-markdown": "^2.0.0", "micromark-util-types": "^2.0.0", "unified": "^11.0.0" } }, "sha512-FCxlKLNGknS5ba/1lmpYijMUzX2esxW5xQqjWxw2eHFfS2MSdaHVINFmhjo+qN1WhZhNimq0dZATN9pH0IDrpA=="],
+
+    "remark-rehype": ["remark-rehype@11.1.2", "", { "dependencies": { "@types/hast": "^3.0.0", "@types/mdast": "^4.0.0", "mdast-util-to-hast": "^13.0.0", "unified": "^11.0.0", "vfile": "^6.0.0" } }, "sha512-Dh7l57ianaEoIpzbp0PC9UKAdCSVklD8E5Rpw7ETfbTl3FqcOOgq5q2LVDhgGCkaBv7p24JXikPdvhhmHvKMsw=="],
+
+    "remark-smartypants": ["remark-smartypants@3.0.2", "", { "dependencies": { "retext": "^9.0.0", "retext-smartypants": "^6.0.0", "unified": "^11.0.4", "unist-util-visit": "^5.0.0" } }, "sha512-ILTWeOriIluwEvPjv67v7Blgrcx+LZOkAUVtKI3putuhlZm84FnqDORNXPPm+HY3NdZOMhyDwZ1E+eZB/Df5dA=="],
+
+    "remark-stringify": ["remark-stringify@11.0.0", "", { "dependencies": { "@types/mdast": "^4.0.0", "mdast-util-to-markdown": "^2.0.0", "unified": "^11.0.0" } }, "sha512-1OSmLd3awB/t8qdoEOMazZkNsfVTeY4fTsgzcQFdXNq8ToTN4ZGwrMnlda4K6smTFKD+GRV6O48i6Z4iKgPPpw=="],
+
+    "restructure": ["restructure@3.0.2", "", {}, "sha512-gSfoiOEA0VPE6Tukkrr7I0RBdE0s7H1eFCDBk05l1KIQT1UIKNc5JZy6jdyW6eYH3aR3g5b3PuL77rq0hvwtAw=="],
+
+    "retext": ["retext@9.0.0", "", { "dependencies": { "@types/nlcst": "^2.0.0", "retext-latin": "^4.0.0", "retext-stringify": "^4.0.0", "unified": "^11.0.0" } }, "sha512-sbMDcpHCNjvlheSgMfEcVrZko3cDzdbe1x/e7G66dFp0Ff7Mldvi2uv6JkJQzdRcvLYE8CA8Oe8siQx8ZOgTcA=="],
+
+    "retext-latin": ["retext-latin@4.0.0", "", { "dependencies": { "@types/nlcst": "^2.0.0", "parse-latin": "^7.0.0", "unified": "^11.0.0" } }, "sha512-hv9woG7Fy0M9IlRQloq/N6atV82NxLGveq+3H2WOi79dtIYWN8OaxogDm77f8YnVXJL2VD3bbqowu5E3EMhBYA=="],
+
+    "retext-smartypants": ["retext-smartypants@6.2.0", "", { "dependencies": { "@types/nlcst": "^2.0.0", "nlcst-to-string": "^4.0.0", "unist-util-visit": "^5.0.0" } }, "sha512-kk0jOU7+zGv//kfjXEBjdIryL1Acl4i9XNkHxtM7Tm5lFiCog576fjNC9hjoR7LTKQ0DsPWy09JummSsH1uqfQ=="],
+
+    "retext-stringify": ["retext-stringify@4.0.0", "", { "dependencies": { "@types/nlcst": "^2.0.0", "nlcst-to-string": "^4.0.0", "unified": "^11.0.0" } }, "sha512-rtfN/0o8kL1e+78+uxPTqu1Klt0yPzKuQ2BfWwwfgIUSayyzxpM1PJzkKt4V8803uB9qSy32MvI7Xep9khTpiA=="],
+
+    "robust-predicates": ["robust-predicates@3.0.2", "", {}, "sha512-IXgzBWvWQwE6PrDI05OvmXUIruQTcoMDzRsOd5CDvHCVLcLHMTSYvOK5Cm46kWqlV3yAbuSpBZdJ5oP5OUoStg=="],
+
+    "rollup": ["rollup@4.46.2", "", { "dependencies": { "@types/estree": "1.0.8" }, "optionalDependencies": { "@rollup/rollup-android-arm-eabi": "4.46.2", "@rollup/rollup-android-arm64": "4.46.2", "@rollup/rollup-darwin-arm64": "4.46.2", "@rollup/rollup-darwin-x64": "4.46.2", "@rollup/rollup-freebsd-arm64": "4.46.2", "@rollup/rollup-freebsd-x64": "4.46.2", "@rollup/rollup-linux-arm-gnueabihf": "4.46.2", "@rollup/rollup-linux-arm-musleabihf": "4.46.2", "@rollup/rollup-linux-arm64-gnu": "4.46.2", "@rollup/rollup-linux-arm64-musl": "4.46.2", "@rollup/rollup-linux-loongarch64-gnu": "4.46.2", "@rollup/rollup-linux-ppc64-gnu": "4.46.2", "@rollup/rollup-linux-riscv64-gnu": "4.46.2", "@rollup/rollup-linux-riscv64-musl": "4.46.2", "@rollup/rollup-linux-s390x-gnu": "4.46.2", "@rollup/rollup-linux-x64-gnu": "4.46.2", "@rollup/rollup-linux-x64-musl": "4.46.2", "@rollup/rollup-win32-arm64-msvc": "4.46.2", "@rollup/rollup-win32-ia32-msvc": "4.46.2", "@rollup/rollup-win32-x64-msvc": "4.46.2", "fsevents": "~2.3.2" }, "bin": "dist/bin/rollup" }, "sha512-WMmLFI+Boh6xbop+OAGo9cQ3OgX9MIg7xOQjn+pTCwOkk+FNDAeAemXkJ3HzDJrVXleLOFVa1ipuc1AmEx1Dwg=="],
+
+    "rw": ["rw@1.3.3", "", {}, "sha512-PdhdWy89SiZogBLaw42zdeqtRJ//zFd2PgQavcICDUgJT5oW10QCRKbJ6bg4r0/UY2M6BWd5tkxuGFRvCkgfHQ=="],
+
+    "safer-buffer": ["safer-buffer@2.1.2", "", {}, "sha512-YZo3K82SD7Riyi0E1EQPojLz7kpepnSQI9IyPbHHg1XXXevb5dJI7tpyN2ADxGcQbHG7vcyRHk0cbwqcQriUtg=="],
+
+    "sax": ["sax@1.4.1", "", {}, "sha512-+aWOz7yVScEGoKNd4PA10LZ8sk0A/z5+nXQG5giUO5rprX9jgYsTdov9qCchZiPIZezbZH+jRut8nPodFAX4Jg=="],
+
+    "section-matter": ["section-matter@1.0.0", "", { "dependencies": { "extend-shallow": "^2.0.1", "kind-of": "^6.0.0" } }, "sha512-vfD3pmTzGpufjScBh50YHKzEu2lxBWhVEHsNGoEXmCmn2hKGfeNLYMzCJpe8cD7gqX7TJluOVpBkAequ6dgMmA=="],
+
+    "semver": ["semver@7.7.2", "", { "bin": "bin/semver.js" }, "sha512-RF0Fw+rO5AMf9MAyaRXI4AV0Ulj5lMHqVxxdSgiVbixSCXoEmmX/jk0CuJw4+3SqroYO9VoUh+HcuJivvtJemA=="],
+
+    "sharp": ["sharp@0.34.3", "", { "dependencies": { "color": "^4.2.3", "detect-libc": "^2.0.4", "semver": "^7.7.2" }, "optionalDependencies": { "@img/sharp-darwin-arm64": "0.34.3", "@img/sharp-darwin-x64": "0.34.3", "@img/sharp-libvips-darwin-arm64": "1.2.0", "@img/sharp-libvips-darwin-x64": "1.2.0", "@img/sharp-libvips-linux-arm": "1.2.0", "@img/sharp-libvips-linux-arm64": "1.2.0", "@img/sharp-libvips-linux-ppc64": "1.2.0", "@img/sharp-libvips-linux-s390x": "1.2.0", "@img/sharp-libvips-linux-x64": "1.2.0", "@img/sharp-libvips-linuxmusl-arm64": "1.2.0", "@img/sharp-libvips-linuxmusl-x64": "1.2.0", "@img/sharp-linux-arm": "0.34.3", "@img/sharp-linux-arm64": "0.34.3", "@img/sharp-linux-ppc64": "0.34.3", "@img/sharp-linux-s390x": "0.34.3", "@img/sharp-linux-x64": "0.34.3", "@img/sharp-linuxmusl-arm64": "0.34.3", "@img/sharp-linuxmusl-x64": "0.34.3", "@img/sharp-wasm32": "0.34.3", "@img/sharp-win32-arm64": "0.34.3", "@img/sharp-win32-ia32": "0.34.3", "@img/sharp-win32-x64": "0.34.3" } }, "sha512-eX2IQ6nFohW4DbvHIOLRB3MHFpYqaqvXd3Tp5e/T/dSH83fxaNJQRvDMhASmkNTsNTVF2/OOopzRCt7xokgPfg=="],
+
+    "shiki": ["shiki@3.9.2", "", { "dependencies": { "@shikijs/core": "3.9.2", "@shikijs/engine-javascript": "3.9.2", "@shikijs/engine-oniguruma": "3.9.2", "@shikijs/langs": "3.9.2", "@shikijs/themes": "3.9.2", "@shikijs/types": "3.9.2", "@shikijs/vscode-textmate": "^10.0.2", "@types/hast": "^3.0.4" } }, "sha512-t6NKl5e/zGTvw/IyftLcumolgOczhuroqwXngDeMqJ3h3EQiTY/7wmfgPlsmloD8oYfqkEDqxiaH37Pjm1zUhQ=="],
+
+    "simple-swizzle": ["simple-swizzle@0.2.2", "", { "dependencies": { "is-arrayish": "^0.3.1" } }, "sha512-JA//kQgZtbuY83m+xT+tXJkmJncGMTFT+C+g2h2R9uxkYIrE2yy9sgmcLhCnw57/WSD+Eh3J97FPEDFnbXnDUg=="],
+
+    "sisteransi": ["sisteransi@1.0.5", "", {}, "sha512-bLGGlR1QxBcynn2d5YmDX4MGjlZvy2MRBDRNHLJ8VI6l6+9FUiyTFNJ0IveOSP0bcXgVDPRcfGqA0pjaqUpfVg=="],
+
+    "sitemap": ["sitemap@8.0.0", "", { "dependencies": { "@types/node": "^17.0.5", "@types/sax": "^1.2.1", "arg": "^5.0.0", "sax": "^1.2.4" }, "bin": "dist/cli.js" }, "sha512-+AbdxhM9kJsHtruUF39bwS/B0Fytw6Fr1o4ZAIAEqA6cke2xcoO2GleBw9Zw7nRzILVEgz7zBM5GiTJjie1G9A=="],
+
+    "smol-toml": ["smol-toml@1.4.2", "", {}, "sha512-rInDH6lCNiEyn3+hH8KVGFdbjc099j47+OSgbMrfDYX1CmXLfdKd7qi6IfcWj2wFxvSVkuI46M+wPGYfEOEj6g=="],
+
+    "source-map": ["source-map@0.7.6", "", {}, "sha512-i5uvt8C3ikiWeNZSVZNWcfZPItFQOsYTUAOkcUPGd8DqDy1uOUikjt5dG+uRlwyvR108Fb9DOd4GvXfT0N2/uQ=="],
+
+    "source-map-js": ["source-map-js@1.2.1", "", {}, "sha512-UXWMKhLOwVKb728IUtQPXxfYU+usdybtUrK/8uGE8CQMvrhOpwvzDBwj0QhSL7MQc7vIsISBG8VQ8+IDQxpfQA=="],
+
+    "space-separated-tokens": ["space-separated-tokens@2.0.2", "", {}, "sha512-PEGlAwrG8yXGXRjW32fGbg66JAlOAwbObuqVoJpv/mRgoWDQfgH1wDPvtzWyUSNAXBGSk8h755YDbbcEy3SH2Q=="],
+
+    "sprintf-js": ["sprintf-js@1.0.3", "", {}, "sha512-D9cPgkvLlV3t3IzL0D0YLvGA9Ahk4PcvVwUbN0dSGr1aP0Nrt4AEnTUbuGvquEC0mA64Gqt1fzirlRs5ibXx8g=="],
+
+    "starlight-contextual-menu": ["starlight-contextual-menu@0.1.3", "", { "peerDependencies": { "astro": "^5.0.0", "starlight-markdown": "^0.1.5" } }, "sha512-6ESUZOeeuAuEGT0dJqZfnnQ1ltRpo8r1NKfr4eQWV+DMg8yx7Yed5/9XaLpOgQPDQVi5/Yu8ffhaupp/VEaudw=="],
+
+    "starlight-image-zoom": ["starlight-image-zoom@0.13.0", "", { "dependencies": { "mdast-util-mdx-jsx": "^3.1.3", "rehype-raw": "^7.0.0", "unist-util-visit": "^5.0.0", "unist-util-visit-parents": "^6.0.1" }, "peerDependencies": { "@astrojs/starlight": ">=0.32.0" } }, "sha512-7K/7gshnKooYd4ePy5vtyv1jFoFVNUb8IoXWDcnY69+nxvmLATNrmOzD2M4TJ/aKynPSBSM6j9ia4s/PPy/JGA=="],
+
+    "starlight-links-validator": ["starlight-links-validator@0.17.0", "", { "dependencies": { "@types/picomatch": "^3.0.1", "github-slugger": "^2.0.0", "hast-util-from-html": "^2.0.3", "hast-util-has-property": "^3.0.0", "is-absolute-url": "^4.0.1", "kleur": "^4.1.5", "mdast-util-mdx-jsx": "^3.1.3", "mdast-util-to-string": "^4.0.0", "picomatch": "^4.0.2", "unist-util-visit": "^5.0.0" }, "peerDependencies": { "@astrojs/starlight": ">=0.32.0" } }, "sha512-D+j0W7Z6CVSxPlt8jskBcApqaAU16JmuxE4c483Xj2sWJteiz0wW2xvk0cG3o/cW1q9x44Ezc668OnUi3a5LAA=="],
+
+    "starlight-llms-txt": ["starlight-llms-txt@0.6.0", "", { "dependencies": { "@astrojs/mdx": "^4.0.5", "@types/hast": "^3.0.4", "@types/micromatch": "^4.0.9", "github-slugger": "^2.0.0", "hast-util-select": "^6.0.3", "micromatch": "^4.0.8", "rehype-parse": "^9.0.1", "rehype-remark": "^10.0.0", "remark-gfm": "^4.0.0", "remark-stringify": "^11.0.0", "unified": "^11.0.5", "unist-util-remove": "^4.0.0" }, "peerDependencies": { "@astrojs/starlight": ">=0.31", "astro": "^5.1.6" } }, "sha512-mKkRPlGZ+kKJlnclXkW3s+RSVF/10Ct2BsQ4dYDaK8j4h/L55WbZCds1PsqQiLYPrDp7wIN6gm7LYsrUlGaBjQ=="],
+
+    "starlight-markdown": ["starlight-markdown@0.1.5", "", { "peerDependencies": { "astro": "^5.0.0" } }, "sha512-23LXRaZp7pyE+r/HP6rxHfwic8HfvUBT4EImECA6encs/eTtrF0Z+7svANofdtfbiNt31D5q26i03B6FtcSmGg=="],
+
+    "starlight-site-graph": ["starlight-site-graph@0.4.1", "", { "dependencies": { "@types/chroma-js": "^3.1.1", "@types/d3": "^7.4.3", "astro-integration-kit": "^0.18.0", "chroma-js": "^3.1.2", "d3": "^7.9.0", "gray-matter": "^4.0.3", "micromatch": "^4.0.8" }, "peerDependencies": { "@astrojs/starlight": ">=0.33.0", "astro": ">=5.5.0", "pixi-stats": "^1.3.10" }, "optionalPeers": ["@astrojs/starlight", "pixi-stats"] }, "sha512-xzrseQaAtymHPj4TSzdhfMG/SKSOTTyivdQjD+SbeTqu9Zi1SVhGmtuFGIIZjwt5col3tiO0CjGEdmdLZU7AZg=="],
+
+    "stream-replace-string": ["stream-replace-string@2.0.0", "", {}, "sha512-TlnjJ1C0QrmxRNrON00JvaFFlNh5TTG00APw23j74ET7gkQpTASi6/L2fuiav8pzK715HXtUeClpBTw2NPSn6w=="],
+
+    "string-width": ["string-width@7.2.0", "", { "dependencies": { "emoji-regex": "^10.3.0", "get-east-asian-width": "^1.0.0", "strip-ansi": "^7.1.0" } }, "sha512-tsaTIkKW9b4N+AEj+SVA+WhJzV7/zMhcSu78mLKWSk7cXMOSHsBKFWUs0fWwq8QyK3MgJBQRX6Gbi4kYbdvGkQ=="],
+
+    "stringify-entities": ["stringify-entities@4.0.4", "", { "dependencies": { "character-entities-html4": "^2.0.0", "character-entities-legacy": "^3.0.0" } }, "sha512-IwfBptatlO+QCJUo19AqvrPNqlVMpW9YEL2LIVY+Rpv2qsjCGxaDLNRgeGsQWJhfItebuJhsGSLjaBbNSQ+ieg=="],
+
+    "strip-ansi": ["strip-ansi@7.1.0", "", { "dependencies": { "ansi-regex": "^6.0.1" } }, "sha512-iq6eVVI64nQQTRYq2KtEg2d2uU7LElhTJwsH4YzIHZshxlgZms/wIc4VoDQTlG/IvVIrBKG06CrZnp0qv7hkcQ=="],
+
+    "strip-bom-string": ["strip-bom-string@1.0.0", "", {}, "sha512-uCC2VHvQRYu+lMh4My/sFNmF2klFymLX1wHJeXnbEJERpV/ZsVuonzerjfrGpIGF7LBVa1O7i9kjiWvJiFck8g=="],
+
+    "style-to-js": ["style-to-js@1.1.17", "", { "dependencies": { "style-to-object": "1.0.9" } }, "sha512-xQcBGDxJb6jjFCTzvQtfiPn6YvvP2O8U1MDIPNfJQlWMYfktPy+iGsHE7cssjs7y84d9fQaK4UF3RIJaAHSoYA=="],
+
+    "style-to-object": ["style-to-object@1.0.9", "", { "dependencies": { "inline-style-parser": "0.2.4" } }, "sha512-G4qppLgKu/k6FwRpHiGiKPaPTFcG3g4wNVX/Qsfu+RqQM30E7Tyu/TEgxcL9PNLF5pdRLwQdE3YKKf+KF2Dzlw=="],
+
+    "tiny-inflate": ["tiny-inflate@1.0.3", "", {}, "sha512-pkY1fj1cKHb2seWDy0B16HeWyczlJA9/WW3u3c4z/NiWDsO3DOU5D7nhTLE9CF0yXv/QZFY7sEJmj24dK+Rrqw=="],
+
+    "tiny-invariant": ["tiny-invariant@1.3.3", "", {}, "sha512-+FbBPE1o9QAYvviau/qC5SE3caw21q3xkvWKBtja5vgqOWIHHJ3ioaq1VPfn/Szqctz2bU/oYeKd9/z5BL+PVg=="],
+
+    "tinyexec": ["tinyexec@0.3.2", "", {}, "sha512-KQQR9yN7R5+OSwaK0XQoj22pwHoTlgYqmUscPYoknOoWCWfj/5/ABTMRi69FrKU5ffPVh5QcFikpWJI/P1ocHA=="],
+
+    "tinyglobby": ["tinyglobby@0.2.14", "", { "dependencies": { "fdir": "^6.4.4", "picomatch": "^4.0.2" } }, "sha512-tX5e7OM1HnYr2+a2C/4V0htOcSQcoSTH9KgJnVvNm5zm/cyEWKJ7j7YutsH9CxMdtOkkLFy2AHrMci9IM8IPZQ=="],
+
+    "to-regex-range": ["to-regex-range@5.0.1", "", { "dependencies": { "is-number": "^7.0.0" } }, "sha512-65P7iz6X5yEr1cwcgvQxbbIw7Uk3gOy5dIdtZ4rDveLqhrdJP+Li/Hx6tyK0NEb+2GCyneCMJiGqrADCSNk8sQ=="],
+
+    "tr46": ["tr46@0.0.3", "", {}, "sha512-N3WMsuqV66lT30CrXNbEjx4GEwlow3v6rr4mCcv6prnfwhS01rkgyFdjPNBYd9br7LpXV1+Emh01fHnq2Gdgrw=="],
+
+    "trim-lines": ["trim-lines@3.0.1", "", {}, "sha512-kRj8B+YHZCc9kQYdWfJB2/oUl9rA99qbowYYBtr4ui4mZyAQ2JpvVBd/6U2YloATfqBhBTSMhTpgBHtU0Mf3Rg=="],
+
+    "trim-trailing-lines": ["trim-trailing-lines@2.1.0", "", {}, "sha512-5UR5Biq4VlVOtzqkm2AZlgvSlDJtME46uV0br0gENbwN4l5+mMKT4b9gJKqWtuL2zAIqajGJGuvbCbcAJUZqBg=="],
+
+    "trough": ["trough@2.2.0", "", {}, "sha512-tmMpK00BjZiUyVyvrBK7knerNgmgvcV/KLVyuma/SC+TQN167GrMRciANTz09+k3zW8L8t60jWO1GpfkZdjTaw=="],
+
+    "tsconfck": ["tsconfck@3.1.6", "", { "peerDependencies": { "typescript": "^5.0.0" }, "bin": "bin/tsconfck.js" }, "sha512-ks6Vjr/jEw0P1gmOVwutM3B7fWxoWBL2KRDb1JfqGVawBmO5UsvmWOQFGHBPl5yxYz4eERr19E6L7NMv+Fej4w=="],
+
+    "tslib": ["tslib@2.8.1", "", {}, "sha512-oJFu94HQb+KVduSUQL7wnpmqnfmLsOA/nAh6b6EH0wCEoK0/mPeXU6c3wKDV83MkOuHPRHtSXKKU99IBazS/2w=="],
+
+    "type-fest": ["type-fest@4.41.0", "", {}, "sha512-TeTSQ6H5YHvpqVwBRcnLDCBnDOHWYu7IvGbHT6N8AOymcr9PJGjc1GTtiWZTYg0NCgYwvnYWEkVChQAr9bjfwA=="],
+
+    "typescript": ["typescript@5.9.2", "", { "bin": { "tsc": "bin/tsc", "tsserver": "bin/tsserver" } }, "sha512-CWBzXQrc/qOkhidw1OzBTQuYRbfyxDXJMVJ1XNwUHGROVmuaeiEm3OslpZ1RV96d7SKKjZKrSJu3+t/xlw3R9A=="],
+
+    "ufo": ["ufo@1.6.1", "", {}, "sha512-9a4/uxlTWJ4+a5i0ooc1rU7C7YOw3wT+UGqdeNNHWnOF9qcMBgLRS+4IYUqbczewFx4mLEig6gawh7X6mFlEkA=="],
+
+    "ultrahtml": ["ultrahtml@1.6.0", "", {}, "sha512-R9fBn90VTJrqqLDwyMph+HGne8eqY1iPfYhPzZrvKpIfwkWZbcYlfpsb8B9dTvBfpy1/hqAD7Wi8EKfP9e8zdw=="],
+
+    "uncrypto": ["uncrypto@0.1.3", "", {}, "sha512-Ql87qFHB3s/De2ClA9e0gsnS6zXG27SkTiSJwjCc9MebbfapQfuPzumMIUMi38ezPZVNFcHI9sUIepeQfw8J8Q=="],
+
+    "undici-types": ["undici-types@7.10.0", "", {}, "sha512-t5Fy/nfn+14LuOc2KNYg75vZqClpAiqscVvMygNnlsHBFpSXdJaYtXMcdNLpl/Qvc3P2cB3s6lOV51nqsFq4ag=="],
+
+    "unicode-properties": ["unicode-properties@1.4.1", "", { "dependencies": { "base64-js": "^1.3.0", "unicode-trie": "^2.0.0" } }, "sha512-CLjCCLQ6UuMxWnbIylkisbRj31qxHPAurvena/0iwSVbQ2G1VY5/HjV0IRabOEbDHlzZlRdCrD4NhB0JtU40Pg=="],
+
+    "unicode-trie": ["unicode-trie@2.0.0", "", { "dependencies": { "pako": "^0.2.5", "tiny-inflate": "^1.0.0" } }, "sha512-x7bc76x0bm4prf1VLg79uhAzKw8DVboClSN5VxJuQ+LKDOVEW9CdH+VY7SP+vX7xCYQqzzgQpFqz15zeLvAtZQ=="],
+
+    "unified": ["unified@11.0.5", "", { "dependencies": { "@types/unist": "^3.0.0", "bail": "^2.0.0", "devlop": "^1.0.0", "extend": "^3.0.0", "is-plain-obj": "^4.0.0", "trough": "^2.0.0", "vfile": "^6.0.0" } }, "sha512-xKvGhPWw3k84Qjh8bI3ZeJjqnyadK+GEFtazSfZv/rKeTkTjOJho6mFqh2SM96iIcZokxiOpg78GazTSg8+KHA=="],
+
+    "unifont": ["unifont@0.5.2", "", { "dependencies": { "css-tree": "^3.0.0", "ofetch": "^1.4.1", "ohash": "^2.0.0" } }, "sha512-LzR4WUqzH9ILFvjLAUU7dK3Lnou/qd5kD+IakBtBK4S15/+x2y9VX+DcWQv6s551R6W+vzwgVS6tFg3XggGBgg=="],
+
+    "unist-util-find-after": ["unist-util-find-after@5.0.0", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-is": "^6.0.0" } }, "sha512-amQa0Ep2m6hE2g72AugUItjbuM8X8cGQnFoHk0pGfrFeT9GZhzN5SW8nRsiGKK7Aif4CrACPENkA6P/Lw6fHGQ=="],
+
+    "unist-util-is": ["unist-util-is@6.0.0", "", { "dependencies": { "@types/unist": "^3.0.0" } }, "sha512-2qCTHimwdxLfz+YzdGfkqNlH0tLi9xjTnHddPmJwtIG9MGsdbutfTc4P+haPD7l7Cjxf/WZj+we5qfVPvvxfYw=="],
+
+    "unist-util-modify-children": ["unist-util-modify-children@4.0.0", "", { "dependencies": { "@types/unist": "^3.0.0", "array-iterate": "^2.0.0" } }, "sha512-+tdN5fGNddvsQdIzUF3Xx82CU9sMM+fA0dLgR9vOmT0oPT2jH+P1nd5lSqfCfXAw+93NhcXNY2qqvTUtE4cQkw=="],
+
+    "unist-util-position": ["unist-util-position@5.0.0", "", { "dependencies": { "@types/unist": "^3.0.0" } }, "sha512-fucsC7HjXvkB5R3kTCO7kUjRdrS0BJt3M/FPxmHMBOm8JQi2BsHAHFsy27E0EolP8rp0NzXsJ+jNPyDWvOJZPA=="],
+
+    "unist-util-position-from-estree": ["unist-util-position-from-estree@2.0.0", "", { "dependencies": { "@types/unist": "^3.0.0" } }, "sha512-KaFVRjoqLyF6YXCbVLNad/eS4+OfPQQn2yOd7zF/h5T/CSL2v8NpN6a5TPvtbXthAGw5nG+PuTtq+DdIZr+cRQ=="],
+
+    "unist-util-remove": ["unist-util-remove@4.0.0", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-is": "^6.0.0", "unist-util-visit-parents": "^6.0.0" } }, "sha512-b4gokeGId57UVRX/eVKej5gXqGlc9+trkORhFJpu9raqZkZhU0zm8Doi05+HaiBsMEIJowL+2WtQ5ItjsngPXg=="],
+
+    "unist-util-remove-position": ["unist-util-remove-position@5.0.0", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-visit": "^5.0.0" } }, "sha512-Hp5Kh3wLxv0PHj9m2yZhhLt58KzPtEYKQQ4yxfYFEO7EvHwzyDYnduhHnY1mDxoqr7VUwVuHXk9RXKIiYS1N8Q=="],
+
+    "unist-util-stringify-position": ["unist-util-stringify-position@4.0.0", "", { "dependencies": { "@types/unist": "^3.0.0" } }, "sha512-0ASV06AAoKCDkS2+xw5RXJywruurpbC4JZSm7nr7MOt1ojAzvyyaO+UxZf18j8FCF6kmzCZKcAgN/yu2gm2XgQ=="],
+
+    "unist-util-visit": ["unist-util-visit@5.0.0", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-is": "^6.0.0", "unist-util-visit-parents": "^6.0.0" } }, "sha512-MR04uvD+07cwl/yhVuVWAtw+3GOR/knlL55Nd/wAdblk27GCVt3lqpTivy/tkJcZoNPzTwS1Y+KMojlLDhoTzg=="],
+
+    "unist-util-visit-children": ["unist-util-visit-children@3.0.0", "", { "dependencies": { "@types/unist": "^3.0.0" } }, "sha512-RgmdTfSBOg04sdPcpTSD1jzoNBjt9a80/ZCzp5cI9n1qPzLZWF9YdvWGN2zmTumP1HWhXKdUWexjy/Wy/lJ7tA=="],
+
+    "unist-util-visit-parents": ["unist-util-visit-parents@6.0.1", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-is": "^6.0.0" } }, "sha512-L/PqWzfTP9lzzEa6CKs0k2nARxTdZduw3zyh8d2NVBnsyvHjSX4TWse388YrrQKbvI8w20fGjGlhgT96WwKykw=="],
+
+    "unstorage": ["unstorage@1.16.1", "", { "dependencies": { "anymatch": "^3.1.3", "chokidar": "^4.0.3", "destr": "^2.0.5", "h3": "^1.15.3", "lru-cache": "^10.4.3", "node-fetch-native": "^1.6.6", "ofetch": "^1.4.1", "ufo": "^1.6.1" }, "peerDependencies": { "@azure/app-configuration": "^1.8.0", "@azure/cosmos": "^4.2.0", "@azure/data-tables": "^13.3.0", "@azure/identity": "^4.6.0", "@azure/keyvault-secrets": "^4.9.0", "@azure/storage-blob": "^12.26.0", "@capacitor/preferences": "^6.0.3 || ^7.0.0", "@deno/kv": ">=0.9.0", "@netlify/blobs": "^6.5.0 || ^7.0.0 || ^8.1.0 || ^9.0.0 || ^10.0.0", "@planetscale/database": "^1.19.0", "@upstash/redis": "^1.34.3", "@vercel/blob": ">=0.27.1", "@vercel/kv": "^1.0.1", "aws4fetch": "^1.0.20", "db0": ">=0.2.1", "idb-keyval": "^6.2.1", "ioredis": "^5.4.2", "uploadthing": "^7.4.4" }, "optionalPeers": ["@azure/app-configuration", "@azure/cosmos", "@azure/data-tables", "@azure/identity", "@azure/keyvault-secrets", "@azure/storage-blob", "@capacitor/preferences", "@deno/kv", "@netlify/blobs", "@planetscale/database", "@upstash/redis", "@vercel/blob", "@vercel/kv", "aws4fetch", "db0", "idb-keyval", "ioredis", "uploadthing"] }, "sha512-gdpZ3guLDhz+zWIlYP1UwQ259tG5T5vYRzDaHMkQ1bBY1SQPutvZnrRjTFaWUUpseErJIgAZS51h6NOcZVZiqQ=="],
+
+    "util-deprecate": ["util-deprecate@1.0.2", "", {}, "sha512-EPD5q1uXyFxJpCrLnCc1nHnq3gOa6DZBocAIiI2TaSCA7VCJ1UJDMagCzIkXNsUYfD1daK//LTEQ8xiIbrHtcw=="],
+
+    "vfile": ["vfile@6.0.3", "", { "dependencies": { "@types/unist": "^3.0.0", "vfile-message": "^4.0.0" } }, "sha512-KzIbH/9tXat2u30jf+smMwFCsno4wHVdNmzFyL+T/L3UGqqk6JKfVqOFOZEpZSHADH1k40ab6NUIXZq422ov3Q=="],
+
+    "vfile-location": ["vfile-location@5.0.3", "", { "dependencies": { "@types/unist": "^3.0.0", "vfile": "^6.0.0" } }, "sha512-5yXvWDEgqeiYiBe1lbxYF7UMAIm/IcopxMHrMQDq3nvKcjPKIhZklUKL+AE7J7uApI4kwe2snsK+eI6UTj9EHg=="],
+
+    "vfile-message": ["vfile-message@4.0.3", "", { "dependencies": { "@types/unist": "^3.0.0", "unist-util-stringify-position": "^4.0.0" } }, "sha512-QTHzsGd1EhbZs4AsQ20JX1rC3cOlt/IWJruk893DfLRr57lcnOeMaWG4K0JrRta4mIJZKth2Au3mM3u03/JWKw=="],
+
+    "vite": ["vite@6.3.5", "", { "dependencies": { "esbuild": "^0.25.0", "fdir": "^6.4.4", "picomatch": "^4.0.2", "postcss": "^8.5.3", "rollup": "^4.34.9", "tinyglobby": "^0.2.13" }, "optionalDependencies": { "fsevents": "~2.3.3" }, "peerDependencies": { "@types/node": "^18.0.0 || ^20.0.0 || >=22.0.0", "jiti": ">=1.21.0", "less": "*", "lightningcss": "^1.21.0", "sass": "*", "sass-embedded": "*", "stylus": "*", "sugarss": "*", "terser": "^5.16.0", "tsx": "^4.8.1", "yaml": "^2.4.2" }, "optionalPeers": ["jiti", "less", "lightningcss", "sass", "sass-embedded", "stylus", "sugarss", "terser", "tsx", "yaml"], "bin": "bin/vite.js" }, "sha512-cZn6NDFE7wdTpINgs++ZJ4N49W2vRp8LCKrn3Ob1kYNtOo21vfDoaV5GzBfLU4MovSAB8uNRm4jgzVQZ+mBzPQ=="],
+
+    "vitefu": ["vitefu@1.1.1", "", { "peerDependencies": { "vite": "^3.0.0 || ^4.0.0 || ^5.0.0 || ^6.0.0 || ^7.0.0-beta.0" } }, "sha512-B/Fegf3i8zh0yFbpzZ21amWzHmuNlLlmJT6n7bu5e+pCHUKQIfXSYokrqOBGEMMe9UG2sostKQF9mml/vYaWJQ=="],
+
+    "web-namespaces": ["web-namespaces@2.0.1", "", {}, "sha512-bKr1DkiNa2krS7qxNtdrtHAmzuYGFQLiQ13TsorsdT6ULTkPLKuu5+GsFpDlg6JFjUTwX2DyhMPG2be8uPrqsQ=="],
+
+    "webidl-conversions": ["webidl-conversions@3.0.1", "", {}, "sha512-2JAn3z8AR6rjK8Sm8orRC0h/bcl/DqL7tRPdGZ4I1CjdF+EaMLmYxBHyXuKL849eucPFhvBoxMsflfOb8kxaeQ=="],
+
+    "whatwg-url": ["whatwg-url@5.0.0", "", { "dependencies": { "tr46": "~0.0.3", "webidl-conversions": "^3.0.0" } }, "sha512-saE57nupxk6v3HY35+jzBwYa0rKSy0XR8JSxZPwgLr7ys0IBzhGviA1/TUGJLmSVqs8pb9AnvICXEuOHLprYTw=="],
+
+    "which-pm-runs": ["which-pm-runs@1.1.0", "", {}, "sha512-n1brCuqClxfFfq/Rb0ICg9giSZqCS+pLtccdag6C2HyufBrh3fBOiy9nb6ggRMvWOVH5GrdJskj5iGTZNxd7SA=="],
+
+    "widest-line": ["widest-line@5.0.0", "", { "dependencies": { "string-width": "^7.0.0" } }, "sha512-c9bZp7b5YtRj2wOe6dlj32MK+Bx/M/d+9VB2SHM1OtsUHR0aV0tdP6DWh/iMt0kWi1t5g1Iudu6hQRNd1A4PVA=="],
+
+    "wrap-ansi": ["wrap-ansi@9.0.0", "", { "dependencies": { "ansi-styles": "^6.2.1", "string-width": "^7.0.0", "strip-ansi": "^7.1.0" } }, "sha512-G8ura3S+3Z2G+mkgNRq8dqaFZAuxfsxpBB8OCTGRTCtp+l/v9nbFNmCUP1BZMts3G1142MsZfn6eeUKrr4PD1Q=="],
+
+    "xxhash-wasm": ["xxhash-wasm@1.1.0", "", {}, "sha512-147y/6YNh+tlp6nd/2pWq38i9h6mz/EuQ6njIrmW8D1BS5nCqs0P6DG+m6zTGnNz5I+uhZ0SHxBs9BsPrwcKDA=="],
+
+    "yargs-parser": ["yargs-parser@21.1.1", "", {}, "sha512-tVpsJW7DdjecAiFpbIB1e3qxIQsE6NoPc5/eTdrbbIC4h0LVsWhnoa3g+m2HclBIujHzsxZ4VJVA+GUuc2/LBw=="],
+
+    "yocto-queue": ["yocto-queue@1.2.1", "", {}, "sha512-AyeEbWOu/TAXdxlV9wmGcR0+yh2j3vYPGOECcIj2S7MkrLyC7ne+oye2BKTItt0ii2PHk4cDy+95+LshzbXnGg=="],
+
+    "yocto-spinner": ["yocto-spinner@0.2.3", "", { "dependencies": { "yoctocolors": "^2.1.1" } }, "sha512-sqBChb33loEnkoXte1bLg45bEBsOP9N1kzQh5JZNKj/0rik4zAPTNSAVPj3uQAdc6slYJ0Ksc403G2XgxsJQFQ=="],
+
+    "yoctocolors": ["yoctocolors@2.1.1", "", {}, "sha512-GQHQqAopRhwU8Kt1DDM8NjibDXHC8eoh1erhGAJPEyveY9qqVeXvVikNKrDz69sHowPMorbPUrH/mx8c50eiBQ=="],
+
+    "zod": ["zod@3.25.76", "", {}, "sha512-gzUt/qt81nXsFGKIFcC3YnfEAx5NkunCfnDlvuBSSFS02bcXu4Lmea0AFIUwbLWxWPx3d9p8S5QoaujKcNQxcQ=="],
+
+    "zod-to-json-schema": ["zod-to-json-schema@3.24.6", "", { "peerDependencies": { "zod": "^3.24.1" } }, "sha512-h/z3PKvcTcTetyjl1fkj79MHNEjm+HpD6NXheWjzOekY7kV+lwDYnHw+ivHkijnCSMz1yJaWBD9vu/Fcmk+vEg=="],
+
+    "zod-to-ts": ["zod-to-ts@1.2.0", "", { "peerDependencies": { "typescript": "^4.9.4 || ^5.0.2", "zod": "^3" } }, "sha512-x30XE43V+InwGpvTySRNz9kB7qFU8DlyEy7BsSTCHPH1R0QasMmHWZDCzYm6bVXtj/9NNJAZF3jW8rzFvH5OFA=="],
+
+    "zwitch": ["zwitch@2.0.4", "", {}, "sha512-bXE4cR/kVZhKZX/RjPEflHaKVhUVl85noU3v6b8apfQEc1x4A+zBxjZ4lN8LqGd6WZ3dl98pY4o717VFmoPp+A=="],
+
+    "@rollup/pluginutils/estree-walker": ["estree-walker@2.0.2", "", {}, "sha512-Rfkk/Mp/DL7JVje3u18FxFujQlTNR2q6QfMSMB7AvCBx91NGj/ba3kCfza0f6dVDbw7YlRf/nDrn7pQrCCyQ/w=="],
+
+    "ansi-align/string-width": ["string-width@4.2.3", "", { "dependencies": { "emoji-regex": "^8.0.0", "is-fullwidth-code-point": "^3.0.0", "strip-ansi": "^6.0.1" } }, "sha512-wKyQRQpjJ0sIp62ErSZdGsjMJWsap5oRNihHhu6G7JVO/9jIB6UyevL+tXuOqrng8j/cxKTWyWUwvSTriiZz/g=="],
+
+    "anymatch/picomatch": ["picomatch@2.3.1", "", {}, "sha512-JU3teHTNjmE2VCGFzuY8EXzCDVwEqB2a8fsIvwaStHhAWJEeVd1o1QD80CU6+ZdEXXSLbSsuLwJjkCBWqRQUVA=="],
+
+    "astro/sharp": ["sharp@0.33.5", "", { "dependencies": { "color": "^4.2.3", "detect-libc": "^2.0.3", "semver": "^7.6.3" }, "optionalDependencies": { "@img/sharp-darwin-arm64": "0.33.5", "@img/sharp-darwin-x64": "0.33.5", "@img/sharp-libvips-darwin-arm64": "1.0.4", "@img/sharp-libvips-darwin-x64": "1.0.4", "@img/sharp-libvips-linux-arm": "1.0.5", "@img/sharp-libvips-linux-arm64": "1.0.4", "@img/sharp-libvips-linux-s390x": "1.0.4", "@img/sharp-libvips-linux-x64": "1.0.4", "@img/sharp-libvips-linuxmusl-arm64": "1.0.4", "@img/sharp-libvips-linuxmusl-x64": "1.0.4", "@img/sharp-linux-arm": "0.33.5", "@img/sharp-linux-arm64": "0.33.5", "@img/sharp-linux-s390x": "0.33.5", "@img/sharp-linux-x64": "0.33.5", "@img/sharp-linuxmusl-arm64": "0.33.5", "@img/sharp-linuxmusl-x64": "0.33.5", "@img/sharp-wasm32": "0.33.5", "@img/sharp-win32-ia32": "0.33.5", "@img/sharp-win32-x64": "0.33.5" } }, "sha512-haPVm1EkS9pgvHrQ/F3Xy+hgcuMV0Wm9vfIBSiwZ05k+xgb0PkBQpGsAA/oWdDobNaZTH5ppvHtzCFbnSEwHVw=="],
+
+    "gray-matter/js-yaml": ["js-yaml@3.14.1", "", { "dependencies": { "argparse": "^1.0.7", "esprima": "^4.0.0" }, "bin": { "js-yaml": "bin/js-yaml.js" } }, "sha512-okMH7OXXJ7YrN9Ok3/SXrnu4iX9yOk+25nqX4imS2npuvTYDmo/QEZoqwZkYaIDk3jVvBOTOIEgEhaLOynBS9g=="],
+
+    "hast-util-to-parse5/property-information": ["property-information@6.5.0", "", {}, "sha512-PgTgs/BlvHxOu8QuEN7wi5A0OmXaBcHpmCSTehcs6Uuu9IkDIEo13Hy7n898RHfrQ49vKCoGeWZSaAK01nwVig=="],
+
+    "micromatch/picomatch": ["picomatch@2.3.1", "", {}, "sha512-JU3teHTNjmE2VCGFzuY8EXzCDVwEqB2a8fsIvwaStHhAWJEeVd1o1QD80CU6+ZdEXXSLbSsuLwJjkCBWqRQUVA=="],
+
+    "parse-entities/@types/unist": ["@types/unist@2.0.11", "", {}, "sha512-CmBKiL6NNo/OqgmMn95Fk9Whlp2mtvIv+KNpQKN2F4SjvrEesubTRWGYSg+BnWZOnlCaSTU1sMpsBOzgbYhnsA=="],
+
+    "prompts/kleur": ["kleur@3.0.3", "", {}, "sha512-eTIzlVOSUR+JxdDFepEYcBMtZ9Qqdef+rnzWdRZuMbOywu5tO2w2N7rqjoANZ5k9vywhL6Br1VRjUIgTQx4E8w=="],
+
+    "recast/source-map": ["source-map@0.6.1", "", {}, "sha512-UjgapumWlbMhkBgzT7Ykc5YXUT46F0iKu8SGXq0bcwP5dz/h0Plj6enJqjz1Zbq2l5WaqYnrVbwWOWMyF3F47g=="],
+
+    "sitemap/@types/node": ["@types/node@17.0.45", "", {}, "sha512-w+tIMs3rq2afQdsPJlODhoUEKzFP1ayaoyl1CcnwtIlsVe7K7bA1NGm4s3PraqTLlXnbIN84zuBlxBWo1u9BLw=="],
+
+    "ansi-align/string-width/emoji-regex": ["emoji-regex@8.0.0", "", {}, "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A=="],
+
+    "ansi-align/string-width/strip-ansi": ["strip-ansi@6.0.1", "", { "dependencies": { "ansi-regex": "^5.0.1" } }, "sha512-Y38VPSHcqkFrCpFnQ9vuSXmquuv5oXOKpGeT6aGrr3o3Gc9AlVa6JBfUSOCnbxGGZF+/0ooI7KrPuUSztUdU5A=="],
+
+    "astro/sharp/@img/sharp-darwin-arm64": ["@img/sharp-darwin-arm64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-darwin-arm64": "1.0.4" }, "os": "darwin", "cpu": "arm64" }, "sha512-UT4p+iz/2H4twwAoLCqfA9UH5pI6DggwKEGuaPy7nCVQ8ZsiY5PIcrRvD1DzuY3qYL07NtIQcWnBSY/heikIFQ=="],
+
+    "astro/sharp/@img/sharp-darwin-x64": ["@img/sharp-darwin-x64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-darwin-x64": "1.0.4" }, "os": "darwin", "cpu": "x64" }, "sha512-fyHac4jIc1ANYGRDxtiqelIbdWkIuQaI84Mv45KvGRRxSAa7o7d1ZKAOBaYbnepLC1WqxfpimdeWfvqqSGwR2Q=="],
+
+    "astro/sharp/@img/sharp-libvips-darwin-arm64": ["@img/sharp-libvips-darwin-arm64@1.0.4", "", { "os": "darwin", "cpu": "arm64" }, "sha512-XblONe153h0O2zuFfTAbQYAX2JhYmDHeWikp1LM9Hul9gVPjFY427k6dFEcOL72O01QxQsWi761svJ/ev9xEDg=="],
+
+    "astro/sharp/@img/sharp-libvips-darwin-x64": ["@img/sharp-libvips-darwin-x64@1.0.4", "", { "os": "darwin", "cpu": "x64" }, "sha512-xnGR8YuZYfJGmWPvmlunFaWJsb9T/AO2ykoP3Fz/0X5XV2aoYBPkX6xqCQvUTKKiLddarLaxpzNe+b1hjeWHAQ=="],
+
+    "astro/sharp/@img/sharp-libvips-linux-arm": ["@img/sharp-libvips-linux-arm@1.0.5", "", { "os": "linux", "cpu": "arm" }, "sha512-gvcC4ACAOPRNATg/ov8/MnbxFDJqf/pDePbBnuBDcjsI8PssmjoKMAz4LtLaVi+OnSb5FK/yIOamqDwGmXW32g=="],
+
+    "astro/sharp/@img/sharp-libvips-linux-arm64": ["@img/sharp-libvips-linux-arm64@1.0.4", "", { "os": "linux", "cpu": "arm64" }, "sha512-9B+taZ8DlyyqzZQnoeIvDVR/2F4EbMepXMc/NdVbkzsJbzkUjhXv/70GQJ7tdLA4YJgNP25zukcxpX2/SueNrA=="],
+
+    "astro/sharp/@img/sharp-libvips-linux-s390x": ["@img/sharp-libvips-linux-s390x@1.0.4", "", { "os": "linux", "cpu": "s390x" }, "sha512-u7Wz6ntiSSgGSGcjZ55im6uvTrOxSIS8/dgoVMoiGE9I6JAfU50yH5BoDlYA1tcuGS7g/QNtetJnxA6QEsCVTA=="],
+
+    "astro/sharp/@img/sharp-libvips-linux-x64": ["@img/sharp-libvips-linux-x64@1.0.4", "", { "os": "linux", "cpu": "x64" }, "sha512-MmWmQ3iPFZr0Iev+BAgVMb3ZyC4KeFc3jFxnNbEPas60e1cIfevbtuyf9nDGIzOaW9PdnDciJm+wFFaTlj5xYw=="],
+
+    "astro/sharp/@img/sharp-libvips-linuxmusl-arm64": ["@img/sharp-libvips-linuxmusl-arm64@1.0.4", "", { "os": "linux", "cpu": "arm64" }, "sha512-9Ti+BbTYDcsbp4wfYib8Ctm1ilkugkA/uscUn6UXK1ldpC1JjiXbLfFZtRlBhjPZ5o1NCLiDbg8fhUPKStHoTA=="],
+
+    "astro/sharp/@img/sharp-libvips-linuxmusl-x64": ["@img/sharp-libvips-linuxmusl-x64@1.0.4", "", { "os": "linux", "cpu": "x64" }, "sha512-viYN1KX9m+/hGkJtvYYp+CCLgnJXwiQB39damAO7WMdKWlIhmYTfHjwSbQeUK/20vY154mwezd9HflVFM1wVSw=="],
+
+    "astro/sharp/@img/sharp-linux-arm": ["@img/sharp-linux-arm@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linux-arm": "1.0.5" }, "os": "linux", "cpu": "arm" }, "sha512-JTS1eldqZbJxjvKaAkxhZmBqPRGmxgu+qFKSInv8moZ2AmT5Yib3EQ1c6gp493HvrvV8QgdOXdyaIBrhvFhBMQ=="],
+
+    "astro/sharp/@img/sharp-linux-arm64": ["@img/sharp-linux-arm64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linux-arm64": "1.0.4" }, "os": "linux", "cpu": "arm64" }, "sha512-JMVv+AMRyGOHtO1RFBiJy/MBsgz0x4AWrT6QoEVVTyh1E39TrCUpTRI7mx9VksGX4awWASxqCYLCV4wBZHAYxA=="],
+
+    "astro/sharp/@img/sharp-linux-s390x": ["@img/sharp-linux-s390x@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linux-s390x": "1.0.4" }, "os": "linux", "cpu": "s390x" }, "sha512-y/5PCd+mP4CA/sPDKl2961b+C9d+vPAveS33s6Z3zfASk2j5upL6fXVPZi7ztePZ5CuH+1kW8JtvxgbuXHRa4Q=="],
+
+    "astro/sharp/@img/sharp-linux-x64": ["@img/sharp-linux-x64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linux-x64": "1.0.4" }, "os": "linux", "cpu": "x64" }, "sha512-opC+Ok5pRNAzuvq1AG0ar+1owsu842/Ab+4qvU879ippJBHvyY5n2mxF1izXqkPYlGuP/M556uh53jRLJmzTWA=="],
+
+    "astro/sharp/@img/sharp-linuxmusl-arm64": ["@img/sharp-linuxmusl-arm64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linuxmusl-arm64": "1.0.4" }, "os": "linux", "cpu": "arm64" }, "sha512-XrHMZwGQGvJg2V/oRSUfSAfjfPxO+4DkiRh6p2AFjLQztWUuY/o8Mq0eMQVIY7HJ1CDQUJlxGGZRw1a5bqmd1g=="],
+
+    "astro/sharp/@img/sharp-linuxmusl-x64": ["@img/sharp-linuxmusl-x64@0.33.5", "", { "optionalDependencies": { "@img/sharp-libvips-linuxmusl-x64": "1.0.4" }, "os": "linux", "cpu": "x64" }, "sha512-WT+d/cgqKkkKySYmqoZ8y3pxx7lx9vVejxW/W4DOFMYVSkErR+w7mf2u8m/y4+xHe7yY9DAXQMWQhpnMuFfScw=="],
+
+    "astro/sharp/@img/sharp-wasm32": ["@img/sharp-wasm32@0.33.5", "", { "dependencies": { "@emnapi/runtime": "^1.2.0" }, "cpu": "none" }, "sha512-ykUW4LVGaMcU9lu9thv85CbRMAwfeadCJHRsg2GmeRa/cJxsVY9Rbd57JcMxBkKHag5U/x7TSBpScF4U8ElVzg=="],
+
+    "astro/sharp/@img/sharp-win32-ia32": ["@img/sharp-win32-ia32@0.33.5", "", { "os": "win32", "cpu": "ia32" }, "sha512-T36PblLaTwuVJ/zw/LaH0PdZkRz5rd3SmMHX8GSmR7vtNSP5Z6bQkExdSK7xGWyxLw4sUknBuugTelgw2faBbQ=="],
+
+    "astro/sharp/@img/sharp-win32-x64": ["@img/sharp-win32-x64@0.33.5", "", { "os": "win32", "cpu": "x64" }, "sha512-MpY/o8/8kj+EcnxwvrP4aTJSWw/aZ7JIGR4aBeZkZw5B7/Jn+tY9/VNwtcoGmdT7GfggGIU4kygOMSbYnOrAbg=="],
+
+    "gray-matter/js-yaml/argparse": ["argparse@1.0.10", "", { "dependencies": { "sprintf-js": "~1.0.2" } }, "sha512-o5Roy6tNG4SL/FOkCAN6RzjiakZS25RLYFrcMttJqbdd8BWrnA+fGz57iN5Pb06pvBGvl5gQ0B48dJlslXvoTg=="],
+
+    "ansi-align/string-width/strip-ansi/ansi-regex": ["ansi-regex@5.0.1", "", {}, "sha512-quJQXlTSUGL2LH9SUXo8VwsY4soanhgo6LNSm84E1LBcE8s3O0wpdiRzyR9z/ZZJMlMWv37qOOb9pdJlMUEKFQ=="],
+  }
+}
diff --git a/templates/starlight-shell/package-lock.json b/templates/starlight-shell/package-lock.json
new file mode 100644
index 00000000..265242db
--- /dev/null
+++ b/templates/starlight-shell/package-lock.json
@@ -0,0 +1,6721 @@
+{
+  "name": "starlight-shell",
+  "version": "0.0.1",
+  "lockfileVersion": 3,
+  "requires": true,
+  "packages": {
+    "": {
+      "name": "starlight-shell",
+      "version": "0.0.1",
+      "dependencies": {
+        "@astrojs/starlight": "^0.35.2",
+        "astro": "^5.6.1",
+        "sharp": "^0.34.2"
+      }
+    },
+    "node_modules/@astrojs/compiler": {
+      "version": "2.12.2",
+      "resolved": "https://registry.npmjs.org/@astrojs/compiler/-/compiler-2.12.2.tgz",
+      "integrity": "sha512-w2zfvhjNCkNMmMMOn5b0J8+OmUaBL1o40ipMvqcG6NRpdC+lKxmTi48DT8Xw0SzJ3AfmeFLB45zXZXtmbsjcgw==",
+      "license": "MIT"
+    },
+    "node_modules/@astrojs/internal-helpers": {
+      "version": "0.7.1",
+      "resolved": "https://registry.npmjs.org/@astrojs/internal-helpers/-/internal-helpers-0.7.1.tgz",
+      "integrity": "sha512-7dwEVigz9vUWDw3nRwLQ/yH/xYovlUA0ZD86xoeKEBmkz9O6iELG1yri67PgAPW6VLL/xInA4t7H0CK6VmtkKQ==",
+      "license": "MIT"
+    },
+    "node_modules/@astrojs/markdown-remark": {
+      "version": "6.3.5",
+      "resolved": "https://registry.npmjs.org/@astrojs/markdown-remark/-/markdown-remark-6.3.5.tgz",
+      "integrity": "sha512-MiR92CkE2BcyWf3b86cBBw/1dKiOH0qhLgXH2OXA6cScrrmmks1Rr4Tl0p/lFpvmgQQrP54Pd1uidJfmxGrpWQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@astrojs/internal-helpers": "0.7.1",
+        "@astrojs/prism": "3.3.0",
+        "github-slugger": "^2.0.0",
+        "hast-util-from-html": "^2.0.3",
+        "hast-util-to-text": "^4.0.2",
+        "import-meta-resolve": "^4.1.0",
+        "js-yaml": "^4.1.0",
+        "mdast-util-definitions": "^6.0.0",
+        "rehype-raw": "^7.0.0",
+        "rehype-stringify": "^10.0.1",
+        "remark-gfm": "^4.0.1",
+        "remark-parse": "^11.0.0",
+        "remark-rehype": "^11.1.2",
+        "remark-smartypants": "^3.0.2",
+        "shiki": "^3.2.1",
+        "smol-toml": "^1.3.4",
+        "unified": "^11.0.5",
+        "unist-util-remove-position": "^5.0.0",
+        "unist-util-visit": "^5.0.0",
+        "unist-util-visit-parents": "^6.0.1",
+        "vfile": "^6.0.3"
+      }
+    },
+    "node_modules/@astrojs/mdx": {
+      "version": "4.3.3",
+      "resolved": "https://registry.npmjs.org/@astrojs/mdx/-/mdx-4.3.3.tgz",
+      "integrity": "sha512-+9+xGP2TBXxcm84cpiq4S9JbuHOHM1fcvREfqW7VHxlUyfUQPByoJ9YYliqHkLS6BMzG+O/+o7n8nguVhuEv4w==",
+      "license": "MIT",
+      "dependencies": {
+        "@astrojs/markdown-remark": "6.3.5",
+        "@mdx-js/mdx": "^3.1.0",
+        "acorn": "^8.14.1",
+        "es-module-lexer": "^1.6.0",
+        "estree-util-visit": "^2.0.0",
+        "hast-util-to-html": "^9.0.5",
+        "kleur": "^4.1.5",
+        "rehype-raw": "^7.0.0",
+        "remark-gfm": "^4.0.1",
+        "remark-smartypants": "^3.0.2",
+        "source-map": "^0.7.4",
+        "unist-util-visit": "^5.0.0",
+        "vfile": "^6.0.3"
+      },
+      "engines": {
+        "node": "18.20.8 || ^20.3.0 || >=22.0.0"
+      },
+      "peerDependencies": {
+        "astro": "^5.0.0"
+      }
+    },
+    "node_modules/@astrojs/prism": {
+      "version": "3.3.0",
+      "resolved": "https://registry.npmjs.org/@astrojs/prism/-/prism-3.3.0.tgz",
+      "integrity": "sha512-q8VwfU/fDZNoDOf+r7jUnMC2//H2l0TuQ6FkGJL8vD8nw/q5KiL3DS1KKBI3QhI9UQhpJ5dc7AtqfbXWuOgLCQ==",
+      "license": "MIT",
+      "dependencies": {
+        "prismjs": "^1.30.0"
+      },
+      "engines": {
+        "node": "18.20.8 || ^20.3.0 || >=22.0.0"
+      }
+    },
+    "node_modules/@astrojs/sitemap": {
+      "version": "3.5.0",
+      "resolved": "https://registry.npmjs.org/@astrojs/sitemap/-/sitemap-3.5.0.tgz",
+      "integrity": "sha512-ldOvoBxuRgpcdndzksskOTzU55g76tkHC/POpejUbPGz6zR4rJKiXh8thX4WEPWDhCTZUafhJ1qf7k1muStHfg==",
+      "license": "MIT",
+      "dependencies": {
+        "sitemap": "^8.0.0",
+        "stream-replace-string": "^2.0.0",
+        "zod": "^3.24.4"
+      }
+    },
+    "node_modules/@astrojs/starlight": {
+      "version": "0.35.2",
+      "resolved": "https://registry.npmjs.org/@astrojs/starlight/-/starlight-0.35.2.tgz",
+      "integrity": "sha512-curGghoW4s5pCbW2tINsJPoxEYPan87ptCOv7GZ+S24N3J6AyaOu/OsjZDEMaIpo3ZlObM5DQn+w7iXl3drDhQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@astrojs/markdown-remark": "^6.3.1",
+        "@astrojs/mdx": "^4.2.3",
+        "@astrojs/sitemap": "^3.3.0",
+        "@pagefind/default-ui": "^1.3.0",
+        "@types/hast": "^3.0.4",
+        "@types/js-yaml": "^4.0.9",
+        "@types/mdast": "^4.0.4",
+        "astro-expressive-code": "^0.41.1",
+        "bcp-47": "^2.1.0",
+        "hast-util-from-html": "^2.0.1",
+        "hast-util-select": "^6.0.2",
+        "hast-util-to-string": "^3.0.0",
+        "hastscript": "^9.0.0",
+        "i18next": "^23.11.5",
+        "js-yaml": "^4.1.0",
+        "klona": "^2.0.6",
+        "mdast-util-directive": "^3.0.0",
+        "mdast-util-to-markdown": "^2.1.0",
+        "mdast-util-to-string": "^4.0.0",
+        "pagefind": "^1.3.0",
+        "rehype": "^13.0.1",
+        "rehype-format": "^5.0.0",
+        "remark-directive": "^3.0.0",
+        "ultrahtml": "^1.6.0",
+        "unified": "^11.0.5",
+        "unist-util-visit": "^5.0.0",
+        "vfile": "^6.0.2"
+      },
+      "peerDependencies": {
+        "astro": "^5.5.0"
+      }
+    },
+    "node_modules/@astrojs/telemetry": {
+      "version": "3.3.0",
+      "resolved": "https://registry.npmjs.org/@astrojs/telemetry/-/telemetry-3.3.0.tgz",
+      "integrity": "sha512-UFBgfeldP06qu6khs/yY+q1cDAaArM2/7AEIqQ9Cuvf7B1hNLq0xDrZkct+QoIGyjq56y8IaE2I3CTvG99mlhQ==",
+      "license": "MIT",
+      "dependencies": {
+        "ci-info": "^4.2.0",
+        "debug": "^4.4.0",
+        "dlv": "^1.1.3",
+        "dset": "^3.1.4",
+        "is-docker": "^3.0.0",
+        "is-wsl": "^3.1.0",
+        "which-pm-runs": "^1.1.0"
+      },
+      "engines": {
+        "node": "18.20.8 || ^20.3.0 || >=22.0.0"
+      }
+    },
+    "node_modules/@babel/helper-string-parser": {
+      "version": "7.27.1",
+      "resolved": "https://registry.npmjs.org/@babel/helper-string-parser/-/helper-string-parser-7.27.1.tgz",
+      "integrity": "sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6.9.0"
+      }
+    },
+    "node_modules/@babel/helper-validator-identifier": {
+      "version": "7.27.1",
+      "resolved": "https://registry.npmjs.org/@babel/helper-validator-identifier/-/helper-validator-identifier-7.27.1.tgz",
+      "integrity": "sha512-D2hP9eA+Sqx1kBZgzxZh0y1trbuU+JoDkiEwqhQ36nodYqJwyEIhPSdMNd7lOm/4io72luTPWH20Yda0xOuUow==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6.9.0"
+      }
+    },
+    "node_modules/@babel/parser": {
+      "version": "7.28.3",
+      "resolved": "https://registry.npmjs.org/@babel/parser/-/parser-7.28.3.tgz",
+      "integrity": "sha512-7+Ey1mAgYqFAx2h0RuoxcQT5+MlG3GTV0TQrgr7/ZliKsm/MNDxVVutlWaziMq7wJNAz8MTqz55XLpWvva6StA==",
+      "license": "MIT",
+      "dependencies": {
+        "@babel/types": "^7.28.2"
+      },
+      "bin": {
+        "parser": "bin/babel-parser.js"
+      },
+      "engines": {
+        "node": ">=6.0.0"
+      }
+    },
+    "node_modules/@babel/runtime": {
+      "version": "7.28.3",
+      "resolved": "https://registry.npmjs.org/@babel/runtime/-/runtime-7.28.3.tgz",
+      "integrity": "sha512-9uIQ10o0WGdpP6GDhXcdOJPJuDgFtIDtN/9+ArJQ2NAfAmiuhTQdzkaTGR33v43GYS2UrSA0eX2pPPHoFVvpxA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6.9.0"
+      }
+    },
+    "node_modules/@babel/types": {
+      "version": "7.28.2",
+      "resolved": "https://registry.npmjs.org/@babel/types/-/types-7.28.2.tgz",
+      "integrity": "sha512-ruv7Ae4J5dUYULmeXw1gmb7rYRz57OWCPM57pHojnLq/3Z1CK2lNSLTCVjxVk1F/TZHwOZZrOWi0ur95BbLxNQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@babel/helper-string-parser": "^7.27.1",
+        "@babel/helper-validator-identifier": "^7.27.1"
+      },
+      "engines": {
+        "node": ">=6.9.0"
+      }
+    },
+    "node_modules/@capsizecss/unpack": {
+      "version": "2.4.0",
+      "resolved": "https://registry.npmjs.org/@capsizecss/unpack/-/unpack-2.4.0.tgz",
+      "integrity": "sha512-GrSU71meACqcmIUxPYOJvGKF0yryjN/L1aCuE9DViCTJI7bfkjgYDPD1zbNDcINJwSSP6UaBZY9GAbYDO7re0Q==",
+      "license": "MIT",
+      "dependencies": {
+        "blob-to-buffer": "^1.2.8",
+        "cross-fetch": "^3.0.4",
+        "fontkit": "^2.0.2"
+      }
+    },
+    "node_modules/@ctrl/tinycolor": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/@ctrl/tinycolor/-/tinycolor-4.1.0.tgz",
+      "integrity": "sha512-WyOx8cJQ+FQus4Mm4uPIZA64gbk3Wxh0so5Lcii0aJifqwoVOlfFtorjLE0Hen4OYyHZMXDWqMmaQemBhgxFRQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=14"
+      }
+    },
+    "node_modules/@emnapi/runtime": {
+      "version": "1.4.5",
+      "resolved": "https://registry.npmjs.org/@emnapi/runtime/-/runtime-1.4.5.tgz",
+      "integrity": "sha512-++LApOtY0pEEz1zrd9vy1/zXVaVJJ/EbAF3u0fXIzPJEDtnITsBGbbK0EkM72amhl/R5b+5xx0Y/QhcVOpuulg==",
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@esbuild/aix-ppc64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/aix-ppc64/-/aix-ppc64-0.25.9.tgz",
+      "integrity": "sha512-OaGtL73Jck6pBKjNIe24BnFE6agGl+6KxDtTfHhy1HmhthfKouEcOhqpSL64K4/0WCtbKFLOdzD/44cJ4k9opA==",
+      "cpu": [
+        "ppc64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "aix"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/android-arm": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/android-arm/-/android-arm-0.25.9.tgz",
+      "integrity": "sha512-5WNI1DaMtxQ7t7B6xa572XMXpHAaI/9Hnhk8lcxF4zVN4xstUgTlvuGDorBguKEnZO70qwEcLpfifMLoxiPqHQ==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "android"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/android-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/android-arm64/-/android-arm64-0.25.9.tgz",
+      "integrity": "sha512-IDrddSmpSv51ftWslJMvl3Q2ZT98fUSL2/rlUXuVqRXHCs5EUF1/f+jbjF5+NG9UffUDMCiTyh8iec7u8RlTLg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "android"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/android-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/android-x64/-/android-x64-0.25.9.tgz",
+      "integrity": "sha512-I853iMZ1hWZdNllhVZKm34f4wErd4lMyeV7BLzEExGEIZYsOzqDWDf+y082izYUE8gtJnYHdeDpN/6tUdwvfiw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "android"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/darwin-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/darwin-arm64/-/darwin-arm64-0.25.9.tgz",
+      "integrity": "sha512-XIpIDMAjOELi/9PB30vEbVMs3GV1v2zkkPnuyRRURbhqjyzIINwj+nbQATh4H9GxUgH1kFsEyQMxwiLFKUS6Rg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/darwin-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/darwin-x64/-/darwin-x64-0.25.9.tgz",
+      "integrity": "sha512-jhHfBzjYTA1IQu8VyrjCX4ApJDnH+ez+IYVEoJHeqJm9VhG9Dh2BYaJritkYK3vMaXrf7Ogr/0MQ8/MeIefsPQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/freebsd-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/freebsd-arm64/-/freebsd-arm64-0.25.9.tgz",
+      "integrity": "sha512-z93DmbnY6fX9+KdD4Ue/H6sYs+bhFQJNCPZsi4XWJoYblUqT06MQUdBCpcSfuiN72AbqeBFu5LVQTjfXDE2A6Q==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "freebsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/freebsd-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/freebsd-x64/-/freebsd-x64-0.25.9.tgz",
+      "integrity": "sha512-mrKX6H/vOyo5v71YfXWJxLVxgy1kyt1MQaD8wZJgJfG4gq4DpQGpgTB74e5yBeQdyMTbgxp0YtNj7NuHN0PoZg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "freebsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-arm": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-arm/-/linux-arm-0.25.9.tgz",
+      "integrity": "sha512-HBU2Xv78SMgaydBmdor38lg8YDnFKSARg1Q6AT0/y2ezUAKiZvc211RDFHlEZRFNRVhcMamiToo7bDx3VEOYQw==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-arm64/-/linux-arm64-0.25.9.tgz",
+      "integrity": "sha512-BlB7bIcLT3G26urh5Dmse7fiLmLXnRlopw4s8DalgZ8ef79Jj4aUcYbk90g8iCa2467HX8SAIidbL7gsqXHdRw==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-ia32": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-ia32/-/linux-ia32-0.25.9.tgz",
+      "integrity": "sha512-e7S3MOJPZGp2QW6AK6+Ly81rC7oOSerQ+P8L0ta4FhVi+/j/v2yZzx5CqqDaWjtPFfYz21Vi1S0auHrap3Ma3A==",
+      "cpu": [
+        "ia32"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-loong64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-loong64/-/linux-loong64-0.25.9.tgz",
+      "integrity": "sha512-Sbe10Bnn0oUAB2AalYztvGcK+o6YFFA/9829PhOCUS9vkJElXGdphz0A3DbMdP8gmKkqPmPcMJmJOrI3VYB1JQ==",
+      "cpu": [
+        "loong64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-mips64el": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-mips64el/-/linux-mips64el-0.25.9.tgz",
+      "integrity": "sha512-YcM5br0mVyZw2jcQeLIkhWtKPeVfAerES5PvOzaDxVtIyZ2NUBZKNLjC5z3/fUlDgT6w89VsxP2qzNipOaaDyA==",
+      "cpu": [
+        "mips64el"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-ppc64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-ppc64/-/linux-ppc64-0.25.9.tgz",
+      "integrity": "sha512-++0HQvasdo20JytyDpFvQtNrEsAgNG2CY1CLMwGXfFTKGBGQT3bOeLSYE2l1fYdvML5KUuwn9Z8L1EWe2tzs1w==",
+      "cpu": [
+        "ppc64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-riscv64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-riscv64/-/linux-riscv64-0.25.9.tgz",
+      "integrity": "sha512-uNIBa279Y3fkjV+2cUjx36xkx7eSjb8IvnL01eXUKXez/CBHNRw5ekCGMPM0BcmqBxBcdgUWuUXmVWwm4CH9kg==",
+      "cpu": [
+        "riscv64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-s390x": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-s390x/-/linux-s390x-0.25.9.tgz",
+      "integrity": "sha512-Mfiphvp3MjC/lctb+7D287Xw1DGzqJPb/J2aHHcHxflUo+8tmN/6d4k6I2yFR7BVo5/g7x2Monq4+Yew0EHRIA==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/linux-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/linux-x64/-/linux-x64-0.25.9.tgz",
+      "integrity": "sha512-iSwByxzRe48YVkmpbgoxVzn76BXjlYFXC7NvLYq+b+kDjyyk30J0JY47DIn8z1MO3K0oSl9fZoRmZPQI4Hklzg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/netbsd-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/netbsd-arm64/-/netbsd-arm64-0.25.9.tgz",
+      "integrity": "sha512-9jNJl6FqaUG+COdQMjSCGW4QiMHH88xWbvZ+kRVblZsWrkXlABuGdFJ1E9L7HK+T0Yqd4akKNa/lO0+jDxQD4Q==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "netbsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/netbsd-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/netbsd-x64/-/netbsd-x64-0.25.9.tgz",
+      "integrity": "sha512-RLLdkflmqRG8KanPGOU7Rpg829ZHu8nFy5Pqdi9U01VYtG9Y0zOG6Vr2z4/S+/3zIyOxiK6cCeYNWOFR9QP87g==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "netbsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/openbsd-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/openbsd-arm64/-/openbsd-arm64-0.25.9.tgz",
+      "integrity": "sha512-YaFBlPGeDasft5IIM+CQAhJAqS3St3nJzDEgsgFixcfZeyGPCd6eJBWzke5piZuZ7CtL656eOSYKk4Ls2C0FRQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "openbsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/openbsd-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/openbsd-x64/-/openbsd-x64-0.25.9.tgz",
+      "integrity": "sha512-1MkgTCuvMGWuqVtAvkpkXFmtL8XhWy+j4jaSO2wxfJtilVCi0ZE37b8uOdMItIHz4I6z1bWWtEX4CJwcKYLcuA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "openbsd"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/openharmony-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/openharmony-arm64/-/openharmony-arm64-0.25.9.tgz",
+      "integrity": "sha512-4Xd0xNiMVXKh6Fa7HEJQbrpP3m3DDn43jKxMjxLLRjWnRsfxjORYJlXPO4JNcXtOyfajXorRKY9NkOpTHptErg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "openharmony"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/sunos-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/sunos-x64/-/sunos-x64-0.25.9.tgz",
+      "integrity": "sha512-WjH4s6hzo00nNezhp3wFIAfmGZ8U7KtrJNlFMRKxiI9mxEK1scOMAaa9i4crUtu+tBr+0IN6JCuAcSBJZfnphw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "sunos"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/win32-arm64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/win32-arm64/-/win32-arm64-0.25.9.tgz",
+      "integrity": "sha512-mGFrVJHmZiRqmP8xFOc6b84/7xa5y5YvR1x8djzXpJBSv/UsNK6aqec+6JDjConTgvvQefdGhFDAs2DLAds6gQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/win32-ia32": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/win32-ia32/-/win32-ia32-0.25.9.tgz",
+      "integrity": "sha512-b33gLVU2k11nVx1OhX3C8QQP6UHQK4ZtN56oFWvVXvz2VkDoe6fbG8TOgHFxEvqeqohmRnIHe5A1+HADk4OQww==",
+      "cpu": [
+        "ia32"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@esbuild/win32-x64": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/@esbuild/win32-x64/-/win32-x64-0.25.9.tgz",
+      "integrity": "sha512-PPOl1mi6lpLNQxnGoyAfschAodRFYXJ+9fs6WHXz7CSWKbOqiMZsubC+BQsVKuul+3vKLuwTHsS2c2y9EoKwxQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/@expressive-code/core": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/@expressive-code/core/-/core-0.41.3.tgz",
+      "integrity": "sha512-9qzohqU7O0+JwMEEgQhnBPOw5DtsQRBXhW++5fvEywsuX44vCGGof1SL5OvPElvNgaWZ4pFZAFSlkNOkGyLwSQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@ctrl/tinycolor": "^4.0.4",
+        "hast-util-select": "^6.0.2",
+        "hast-util-to-html": "^9.0.1",
+        "hast-util-to-text": "^4.0.1",
+        "hastscript": "^9.0.0",
+        "postcss": "^8.4.38",
+        "postcss-nested": "^6.0.1",
+        "unist-util-visit": "^5.0.0",
+        "unist-util-visit-parents": "^6.0.1"
+      }
+    },
+    "node_modules/@expressive-code/plugin-frames": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/@expressive-code/plugin-frames/-/plugin-frames-0.41.3.tgz",
+      "integrity": "sha512-rFQtmf/3N2CK3Cq/uERweMTYZnBu+CwxBdHuOftEmfA9iBE7gTVvwpbh82P9ZxkPLvc40UMhYt7uNuAZexycRQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@expressive-code/core": "^0.41.3"
+      }
+    },
+    "node_modules/@expressive-code/plugin-shiki": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/@expressive-code/plugin-shiki/-/plugin-shiki-0.41.3.tgz",
+      "integrity": "sha512-RlTARoopzhFJIOVHLGvuXJ8DCEme/hjV+ZnRJBIxzxsKVpGPW4Oshqg9xGhWTYdHstTsxO663s0cdBLzZj9TQA==",
+      "license": "MIT",
+      "dependencies": {
+        "@expressive-code/core": "^0.41.3",
+        "shiki": "^3.2.2"
+      }
+    },
+    "node_modules/@expressive-code/plugin-text-markers": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/@expressive-code/plugin-text-markers/-/plugin-text-markers-0.41.3.tgz",
+      "integrity": "sha512-SN8tkIzDpA0HLAscEYD2IVrfLiid6qEdE9QLlGVSxO1KEw7qYvjpbNBQjUjMr5/jvTJ7ys6zysU2vLPHE0sb2g==",
+      "license": "MIT",
+      "dependencies": {
+        "@expressive-code/core": "^0.41.3"
+      }
+    },
+    "node_modules/@img/sharp-darwin-arm64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-darwin-arm64/-/sharp-darwin-arm64-0.34.3.tgz",
+      "integrity": "sha512-ryFMfvxxpQRsgZJqBd4wsttYQbCxsJksrv9Lw/v798JcQ8+w84mBWuXwl+TT0WJ/WrYOLaYpwQXi3sA9nTIaIg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-darwin-arm64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-darwin-x64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-darwin-x64/-/sharp-darwin-x64-0.34.3.tgz",
+      "integrity": "sha512-yHpJYynROAj12TA6qil58hmPmAwxKKC7reUqtGLzsOHfP7/rniNGTL8tjWX6L3CTV4+5P4ypcS7Pp+7OB+8ihA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-darwin-x64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-libvips-darwin-arm64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-darwin-arm64/-/sharp-libvips-darwin-arm64-1.2.0.tgz",
+      "integrity": "sha512-sBZmpwmxqwlqG9ueWFXtockhsxefaV6O84BMOrhtg/YqbTaRdqDE7hxraVE3y6gVM4eExmfzW4a8el9ArLeEiQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-darwin-x64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-darwin-x64/-/sharp-libvips-darwin-x64-1.2.0.tgz",
+      "integrity": "sha512-M64XVuL94OgiNHa5/m2YvEQI5q2cl9d/wk0qFTDVXcYzi43lxuiFTftMR1tOnFQovVXNZJ5TURSDK2pNe9Yzqg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linux-arm": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-arm/-/sharp-libvips-linux-arm-1.2.0.tgz",
+      "integrity": "sha512-mWd2uWvDtL/nvIzThLq3fr2nnGfyr/XMXlq8ZJ9WMR6PXijHlC3ksp0IpuhK6bougvQrchUAfzRLnbsen0Cqvw==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linux-arm64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-arm64/-/sharp-libvips-linux-arm64-1.2.0.tgz",
+      "integrity": "sha512-RXwd0CgG+uPRX5YYrkzKyalt2OJYRiJQ8ED/fi1tq9WQW2jsQIn0tqrlR5l5dr/rjqq6AHAxURhj2DVjyQWSOA==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linux-ppc64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-ppc64/-/sharp-libvips-linux-ppc64-1.2.0.tgz",
+      "integrity": "sha512-Xod/7KaDDHkYu2phxxfeEPXfVXFKx70EAFZ0qyUdOjCcxbjqyJOEUpDe6RIyaunGxT34Anf9ue/wuWOqBW2WcQ==",
+      "cpu": [
+        "ppc64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linux-s390x": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-s390x/-/sharp-libvips-linux-s390x-1.2.0.tgz",
+      "integrity": "sha512-eMKfzDxLGT8mnmPJTNMcjfO33fLiTDsrMlUVcp6b96ETbnJmd4uvZxVJSKPQfS+odwfVaGifhsB07J1LynFehw==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linux-x64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-x64/-/sharp-libvips-linux-x64-1.2.0.tgz",
+      "integrity": "sha512-ZW3FPWIc7K1sH9E3nxIGB3y3dZkpJlMnkk7z5tu1nSkBoCgw2nSRTFHI5pB/3CQaJM0pdzMF3paf9ckKMSE9Tg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linuxmusl-arm64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linuxmusl-arm64/-/sharp-libvips-linuxmusl-arm64-1.2.0.tgz",
+      "integrity": "sha512-UG+LqQJbf5VJ8NWJ5Z3tdIe/HXjuIdo4JeVNADXBFuG7z9zjoegpzzGIyV5zQKi4zaJjnAd2+g2nna8TZvuW9Q==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-libvips-linuxmusl-x64": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linuxmusl-x64/-/sharp-libvips-linuxmusl-x64-1.2.0.tgz",
+      "integrity": "sha512-SRYOLR7CXPgNze8akZwjoGBoN1ThNZoqpOgfnOxmWsklTGVfJiGJoC/Lod7aNMGA1jSsKWM1+HRX43OP6p9+6Q==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-linux-arm": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-arm/-/sharp-linux-arm-0.34.3.tgz",
+      "integrity": "sha512-oBK9l+h6KBN0i3dC8rYntLiVfW8D8wH+NPNT3O/WBHeW0OQWCjfWksLUaPidsrDKpJgXp3G3/hkmhptAW0I3+A==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-arm": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linux-arm64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-arm64/-/sharp-linux-arm64-0.34.3.tgz",
+      "integrity": "sha512-QdrKe3EvQrqwkDrtuTIjI0bu6YEJHTgEeqdzI3uWJOH6G1O8Nl1iEeVYRGdj1h5I21CqxSvQp1Yv7xeU3ZewbA==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-arm64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linux-ppc64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-ppc64/-/sharp-linux-ppc64-0.34.3.tgz",
+      "integrity": "sha512-GLtbLQMCNC5nxuImPR2+RgrviwKwVql28FWZIW1zWruy6zLgA5/x2ZXk3mxj58X/tszVF69KK0Is83V8YgWhLA==",
+      "cpu": [
+        "ppc64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-ppc64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linux-s390x": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-s390x/-/sharp-linux-s390x-0.34.3.tgz",
+      "integrity": "sha512-3gahT+A6c4cdc2edhsLHmIOXMb17ltffJlxR0aC2VPZfwKoTGZec6u5GrFgdR7ciJSsHT27BD3TIuGcuRT0KmQ==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-s390x": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linux-x64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-x64/-/sharp-linux-x64-0.34.3.tgz",
+      "integrity": "sha512-8kYso8d806ypnSq3/Ly0QEw90V5ZoHh10yH0HnrzOCr6DKAPI6QVHvwleqMkVQ0m+fc7EH8ah0BB0QPuWY6zJQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-x64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linuxmusl-arm64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linuxmusl-arm64/-/sharp-linuxmusl-arm64-0.34.3.tgz",
+      "integrity": "sha512-vAjbHDlr4izEiXM1OTggpCcPg9tn4YriK5vAjowJsHwdBIdx0fYRsURkxLG2RLm9gyBq66gwtWI8Gx0/ov+JKQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linuxmusl-arm64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-linuxmusl-x64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linuxmusl-x64/-/sharp-linuxmusl-x64-0.34.3.tgz",
+      "integrity": "sha512-gCWUn9547K5bwvOn9l5XGAEjVTTRji4aPTqLzGXHvIr6bIDZKNTA34seMPgM0WmSf+RYBH411VavCejp3PkOeQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linuxmusl-x64": "1.2.0"
+      }
+    },
+    "node_modules/@img/sharp-wasm32": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-wasm32/-/sharp-wasm32-0.34.3.tgz",
+      "integrity": "sha512-+CyRcpagHMGteySaWos8IbnXcHgfDn7pO2fiC2slJxvNq9gDipYBN42/RagzctVRKgxATmfqOSulgZv5e1RdMg==",
+      "cpu": [
+        "wasm32"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later AND MIT",
+      "optional": true,
+      "dependencies": {
+        "@emnapi/runtime": "^1.4.4"
+      },
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-win32-arm64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-win32-arm64/-/sharp-win32-arm64-0.34.3.tgz",
+      "integrity": "sha512-MjnHPnbqMXNC2UgeLJtX4XqoVHHlZNd+nPt1kRPmj63wURegwBhZlApELdtxM2OIZDRv/DFtLcNhVbd1z8GYXQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-win32-ia32": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-win32-ia32/-/sharp-win32-ia32-0.34.3.tgz",
+      "integrity": "sha512-xuCdhH44WxuXgOM714hn4amodJMZl3OEvf0GVTm0BEyMeA2to+8HEdRPShH0SLYptJY1uBw+SCFP9WVQi1Q/cw==",
+      "cpu": [
+        "ia32"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@img/sharp-win32-x64": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/@img/sharp-win32-x64/-/sharp-win32-x64-0.34.3.tgz",
+      "integrity": "sha512-OWwz05d++TxzLEv4VnsTz5CmZ6mI6S05sfQGEMrNrQcOEERbX46332IvE7pO/EUiw7jUrrS40z/M7kPyjfl04g==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/@jridgewell/sourcemap-codec": {
+      "version": "1.5.5",
+      "resolved": "https://registry.npmjs.org/@jridgewell/sourcemap-codec/-/sourcemap-codec-1.5.5.tgz",
+      "integrity": "sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og==",
+      "license": "MIT"
+    },
+    "node_modules/@mdx-js/mdx": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/@mdx-js/mdx/-/mdx-3.1.0.tgz",
+      "integrity": "sha512-/QxEhPAvGwbQmy1Px8F899L5Uc2KZ6JtXwlCgJmjSTBedwOZkByYcBG4GceIGPXRDsmfxhHazuS+hlOShRLeDw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "@types/estree-jsx": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "@types/mdx": "^2.0.0",
+        "collapse-white-space": "^2.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-is-identifier-name": "^3.0.0",
+        "estree-util-scope": "^1.0.0",
+        "estree-walker": "^3.0.0",
+        "hast-util-to-jsx-runtime": "^2.0.0",
+        "markdown-extensions": "^2.0.0",
+        "recma-build-jsx": "^1.0.0",
+        "recma-jsx": "^1.0.0",
+        "recma-stringify": "^1.0.0",
+        "rehype-recma": "^1.0.0",
+        "remark-mdx": "^3.0.0",
+        "remark-parse": "^11.0.0",
+        "remark-rehype": "^11.0.0",
+        "source-map": "^0.7.0",
+        "unified": "^11.0.0",
+        "unist-util-position-from-estree": "^2.0.0",
+        "unist-util-stringify-position": "^4.0.0",
+        "unist-util-visit": "^5.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/@oslojs/encoding": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/@oslojs/encoding/-/encoding-1.1.0.tgz",
+      "integrity": "sha512-70wQhgYmndg4GCPxPPxPGevRKqTIJ2Nh4OkiMWmDAVYsTQ+Ta7Sq+rPevXyXGdzr30/qZBnyOalCszoMxlyldQ==",
+      "license": "MIT"
+    },
+    "node_modules/@pagefind/darwin-arm64": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/darwin-arm64/-/darwin-arm64-1.3.0.tgz",
+      "integrity": "sha512-365BEGl6ChOsauRjyVpBjXybflXAOvoMROw3TucAROHIcdBvXk9/2AmEvGFU0r75+vdQI4LJdJdpH4Y6Yqaj4A==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ]
+    },
+    "node_modules/@pagefind/darwin-x64": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/darwin-x64/-/darwin-x64-1.3.0.tgz",
+      "integrity": "sha512-zlGHA23uuXmS8z3XxEGmbHpWDxXfPZ47QS06tGUq0HDcZjXjXHeLG+cboOy828QIV5FXsm9MjfkP5e4ZNbOkow==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ]
+    },
+    "node_modules/@pagefind/default-ui": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/default-ui/-/default-ui-1.3.0.tgz",
+      "integrity": "sha512-CGKT9ccd3+oRK6STXGgfH+m0DbOKayX6QGlq38TfE1ZfUcPc5+ulTuzDbZUnMo+bubsEOIypm4Pl2iEyzZ1cNg==",
+      "license": "MIT"
+    },
+    "node_modules/@pagefind/linux-arm64": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/linux-arm64/-/linux-arm64-1.3.0.tgz",
+      "integrity": "sha512-8lsxNAiBRUk72JvetSBXs4WRpYrQrVJXjlRRnOL6UCdBN9Nlsz0t7hWstRk36+JqHpGWOKYiuHLzGYqYAqoOnQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@pagefind/linux-x64": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/linux-x64/-/linux-x64-1.3.0.tgz",
+      "integrity": "sha512-hAvqdPJv7A20Ucb6FQGE6jhjqy+vZ6pf+s2tFMNtMBG+fzcdc91uTw7aP/1Vo5plD0dAOHwdxfkyw0ugal4kcQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@pagefind/windows-x64": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@pagefind/windows-x64/-/windows-x64-1.3.0.tgz",
+      "integrity": "sha512-BR1bIRWOMqkf8IoU576YDhij1Wd/Zf2kX/kCI0b2qzCKC8wcc2GQJaaRMCpzvCCrmliO4vtJ6RITp/AnoYUUmQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ]
+    },
+    "node_modules/@rollup/pluginutils": {
+      "version": "5.2.0",
+      "resolved": "https://registry.npmjs.org/@rollup/pluginutils/-/pluginutils-5.2.0.tgz",
+      "integrity": "sha512-qWJ2ZTbmumwiLFomfzTyt5Kng4hwPi9rwCYN4SHb6eaRU1KNO4ccxINHr/VhH4GgPlt1XfSTLX2LBTme8ne4Zw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "estree-walker": "^2.0.2",
+        "picomatch": "^4.0.2"
+      },
+      "engines": {
+        "node": ">=14.0.0"
+      },
+      "peerDependencies": {
+        "rollup": "^1.20.0||^2.0.0||^3.0.0||^4.0.0"
+      },
+      "peerDependenciesMeta": {
+        "rollup": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/@rollup/pluginutils/node_modules/estree-walker": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/estree-walker/-/estree-walker-2.0.2.tgz",
+      "integrity": "sha512-Rfkk/Mp/DL7JVje3u18FxFujQlTNR2q6QfMSMB7AvCBx91NGj/ba3kCfza0f6dVDbw7YlRf/nDrn7pQrCCyQ/w==",
+      "license": "MIT"
+    },
+    "node_modules/@rollup/rollup-android-arm-eabi": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-android-arm-eabi/-/rollup-android-arm-eabi-4.46.2.tgz",
+      "integrity": "sha512-Zj3Hl6sN34xJtMv7Anwb5Gu01yujyE/cLBDB2gnHTAHaWS1Z38L7kuSG+oAh0giZMqG060f/YBStXtMH6FvPMA==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "android"
+      ]
+    },
+    "node_modules/@rollup/rollup-android-arm64": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-android-arm64/-/rollup-android-arm64-4.46.2.tgz",
+      "integrity": "sha512-nTeCWY83kN64oQ5MGz3CgtPx8NSOhC5lWtsjTs+8JAJNLcP3QbLCtDDgUKQc/Ro/frpMq4SHUaHN6AMltcEoLQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "android"
+      ]
+    },
+    "node_modules/@rollup/rollup-darwin-arm64": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-darwin-arm64/-/rollup-darwin-arm64-4.46.2.tgz",
+      "integrity": "sha512-HV7bW2Fb/F5KPdM/9bApunQh68YVDU8sO8BvcW9OngQVN3HHHkw99wFupuUJfGR9pYLLAjcAOA6iO+evsbBaPQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ]
+    },
+    "node_modules/@rollup/rollup-darwin-x64": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-darwin-x64/-/rollup-darwin-x64-4.46.2.tgz",
+      "integrity": "sha512-SSj8TlYV5nJixSsm/y3QXfhspSiLYP11zpfwp6G/YDXctf3Xkdnk4woJIF5VQe0of2OjzTt8EsxnJDCdHd2xMA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ]
+    },
+    "node_modules/@rollup/rollup-freebsd-arm64": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-freebsd-arm64/-/rollup-freebsd-arm64-4.46.2.tgz",
+      "integrity": "sha512-ZyrsG4TIT9xnOlLsSSi9w/X29tCbK1yegE49RYm3tu3wF1L/B6LVMqnEWyDB26d9Ecx9zrmXCiPmIabVuLmNSg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "freebsd"
+      ]
+    },
+    "node_modules/@rollup/rollup-freebsd-x64": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-freebsd-x64/-/rollup-freebsd-x64-4.46.2.tgz",
+      "integrity": "sha512-pCgHFoOECwVCJ5GFq8+gR8SBKnMO+xe5UEqbemxBpCKYQddRQMgomv1104RnLSg7nNvgKy05sLsY51+OVRyiVw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "freebsd"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-arm-gnueabihf": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-arm-gnueabihf/-/rollup-linux-arm-gnueabihf-4.46.2.tgz",
+      "integrity": "sha512-EtP8aquZ0xQg0ETFcxUbU71MZlHaw9MChwrQzatiE8U/bvi5uv/oChExXC4mWhjiqK7azGJBqU0tt5H123SzVA==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-arm-musleabihf": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-arm-musleabihf/-/rollup-linux-arm-musleabihf-4.46.2.tgz",
+      "integrity": "sha512-qO7F7U3u1nfxYRPM8HqFtLd+raev2K137dsV08q/LRKRLEc7RsiDWihUnrINdsWQxPR9jqZ8DIIZ1zJJAm5PjQ==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-arm64-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-arm64-gnu/-/rollup-linux-arm64-gnu-4.46.2.tgz",
+      "integrity": "sha512-3dRaqLfcOXYsfvw5xMrxAk9Lb1f395gkoBYzSFcc/scgRFptRXL9DOaDpMiehf9CO8ZDRJW2z45b6fpU5nwjng==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-arm64-musl": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-arm64-musl/-/rollup-linux-arm64-musl-4.46.2.tgz",
+      "integrity": "sha512-fhHFTutA7SM+IrR6lIfiHskxmpmPTJUXpWIsBXpeEwNgZzZZSg/q4i6FU4J8qOGyJ0TR+wXBwx/L7Ho9z0+uDg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-loongarch64-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-loongarch64-gnu/-/rollup-linux-loongarch64-gnu-4.46.2.tgz",
+      "integrity": "sha512-i7wfGFXu8x4+FRqPymzjD+Hyav8l95UIZ773j7J7zRYc3Xsxy2wIn4x+llpunexXe6laaO72iEjeeGyUFmjKeA==",
+      "cpu": [
+        "loong64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-ppc64-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-ppc64-gnu/-/rollup-linux-ppc64-gnu-4.46.2.tgz",
+      "integrity": "sha512-B/l0dFcHVUnqcGZWKcWBSV2PF01YUt0Rvlurci5P+neqY/yMKchGU8ullZvIv5e8Y1C6wOn+U03mrDylP5q9Yw==",
+      "cpu": [
+        "ppc64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-riscv64-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-riscv64-gnu/-/rollup-linux-riscv64-gnu-4.46.2.tgz",
+      "integrity": "sha512-32k4ENb5ygtkMwPMucAb8MtV8olkPT03oiTxJbgkJa7lJ7dZMr0GCFJlyvy+K8iq7F/iuOr41ZdUHaOiqyR3iQ==",
+      "cpu": [
+        "riscv64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-riscv64-musl": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-riscv64-musl/-/rollup-linux-riscv64-musl-4.46.2.tgz",
+      "integrity": "sha512-t5B2loThlFEauloaQkZg9gxV05BYeITLvLkWOkRXogP4qHXLkWSbSHKM9S6H1schf/0YGP/qNKtiISlxvfmmZw==",
+      "cpu": [
+        "riscv64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-s390x-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-s390x-gnu/-/rollup-linux-s390x-gnu-4.46.2.tgz",
+      "integrity": "sha512-YKjekwTEKgbB7n17gmODSmJVUIvj8CX7q5442/CK80L8nqOUbMtf8b01QkG3jOqyr1rotrAnW6B/qiHwfcuWQA==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-x64-gnu": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-x64-gnu/-/rollup-linux-x64-gnu-4.46.2.tgz",
+      "integrity": "sha512-Jj5a9RUoe5ra+MEyERkDKLwTXVu6s3aACP51nkfnK9wJTraCC8IMe3snOfALkrjTYd2G1ViE1hICj0fZ7ALBPA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-linux-x64-musl": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-linux-x64-musl/-/rollup-linux-x64-musl-4.46.2.tgz",
+      "integrity": "sha512-7kX69DIrBeD7yNp4A5b81izs8BqoZkCIaxQaOpumcJ1S/kmqNFjPhDu1LHeVXv0SexfHQv5cqHsxLOjETuqDuA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "linux"
+      ]
+    },
+    "node_modules/@rollup/rollup-win32-arm64-msvc": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-win32-arm64-msvc/-/rollup-win32-arm64-msvc-4.46.2.tgz",
+      "integrity": "sha512-wiJWMIpeaak/jsbaq2HMh/rzZxHVW1rU6coyeNNpMwk5isiPjSTx0a4YLSlYDwBH/WBvLz+EtsNqQScZTLJy3g==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ]
+    },
+    "node_modules/@rollup/rollup-win32-ia32-msvc": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-win32-ia32-msvc/-/rollup-win32-ia32-msvc-4.46.2.tgz",
+      "integrity": "sha512-gBgaUDESVzMgWZhcyjfs9QFK16D8K6QZpwAaVNJxYDLHWayOta4ZMjGm/vsAEy3hvlS2GosVFlBlP9/Wb85DqQ==",
+      "cpu": [
+        "ia32"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ]
+    },
+    "node_modules/@rollup/rollup-win32-x64-msvc": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/@rollup/rollup-win32-x64-msvc/-/rollup-win32-x64-msvc-4.46.2.tgz",
+      "integrity": "sha512-CvUo2ixeIQGtF6WvuB87XWqPQkoFAFqW+HUo/WzHwuHDvIwZCtjdWXoYCcr06iKGydiqTclC4jU/TNObC/xKZg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "win32"
+      ]
+    },
+    "node_modules/@shikijs/core": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/core/-/core-3.9.2.tgz",
+      "integrity": "sha512-3q/mzmw09B2B6PgFNeiaN8pkNOixWS726IHmJEpjDAcneDPMQmUg2cweT9cWXY4XcyQS3i6mOOUgQz9RRUP6HA==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/types": "3.9.2",
+        "@shikijs/vscode-textmate": "^10.0.2",
+        "@types/hast": "^3.0.4",
+        "hast-util-to-html": "^9.0.5"
+      }
+    },
+    "node_modules/@shikijs/engine-javascript": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/engine-javascript/-/engine-javascript-3.9.2.tgz",
+      "integrity": "sha512-kUTRVKPsB/28H5Ko6qEsyudBiWEDLst+Sfi+hwr59E0GLHV0h8RfgbQU7fdN5Lt9A8R1ulRiZyTvAizkROjwDA==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/types": "3.9.2",
+        "@shikijs/vscode-textmate": "^10.0.2",
+        "oniguruma-to-es": "^4.3.3"
+      }
+    },
+    "node_modules/@shikijs/engine-oniguruma": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/engine-oniguruma/-/engine-oniguruma-3.9.2.tgz",
+      "integrity": "sha512-Vn/w5oyQ6TUgTVDIC/BrpXwIlfK6V6kGWDVVz2eRkF2v13YoENUvaNwxMsQU/t6oCuZKzqp9vqtEtEzKl9VegA==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/types": "3.9.2",
+        "@shikijs/vscode-textmate": "^10.0.2"
+      }
+    },
+    "node_modules/@shikijs/langs": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/langs/-/langs-3.9.2.tgz",
+      "integrity": "sha512-X1Q6wRRQXY7HqAuX3I8WjMscjeGjqXCg/Sve7J2GWFORXkSrXud23UECqTBIdCSNKJioFtmUGJQNKtlMMZMn0w==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/types": "3.9.2"
+      }
+    },
+    "node_modules/@shikijs/themes": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/themes/-/themes-3.9.2.tgz",
+      "integrity": "sha512-6z5lBPBMRfLyyEsgf6uJDHPa6NAGVzFJqH4EAZ+03+7sedYir2yJBRu2uPZOKmj43GyhVHWHvyduLDAwJQfDjA==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/types": "3.9.2"
+      }
+    },
+    "node_modules/@shikijs/types": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/types/-/types-3.9.2.tgz",
+      "integrity": "sha512-/M5L0Uc2ljyn2jKvj4Yiah7ow/W+DJSglVafvWAJ/b8AZDeeRAdMu3c2riDzB7N42VD+jSnWxeP9AKtd4TfYVw==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/vscode-textmate": "^10.0.2",
+        "@types/hast": "^3.0.4"
+      }
+    },
+    "node_modules/@shikijs/vscode-textmate": {
+      "version": "10.0.2",
+      "resolved": "https://registry.npmjs.org/@shikijs/vscode-textmate/-/vscode-textmate-10.0.2.tgz",
+      "integrity": "sha512-83yeghZ2xxin3Nj8z1NMd/NCuca+gsYXswywDy5bHvwlWL8tpTQmzGeUuHd9FC3E/SBEMvzJRwWEOz5gGes9Qg==",
+      "license": "MIT"
+    },
+    "node_modules/@swc/helpers": {
+      "version": "0.5.17",
+      "resolved": "https://registry.npmjs.org/@swc/helpers/-/helpers-0.5.17.tgz",
+      "integrity": "sha512-5IKx/Y13RsYd+sauPb2x+U/xZikHjolzfuDgTAl/Tdf3Q8rslRvC19NKDLgAJQ6wsqADk10ntlv08nPFw/gO/A==",
+      "license": "Apache-2.0",
+      "dependencies": {
+        "tslib": "^2.8.0"
+      }
+    },
+    "node_modules/@types/debug": {
+      "version": "4.1.12",
+      "resolved": "https://registry.npmjs.org/@types/debug/-/debug-4.1.12.tgz",
+      "integrity": "sha512-vIChWdVG3LG1SMxEvI/AK+FWJthlrqlTu7fbrlywTkkaONwk/UAGaULXRlf8vkzFBLVm0zkMdCquhL5aOjhXPQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/ms": "*"
+      }
+    },
+    "node_modules/@types/estree": {
+      "version": "1.0.8",
+      "resolved": "https://registry.npmjs.org/@types/estree/-/estree-1.0.8.tgz",
+      "integrity": "sha512-dWHzHa2WqEXI/O1E9OjrocMTKJl2mSrEolh1Iomrv6U+JuNwaHXsXx9bLu5gG7BUWFIN0skIQJQ/L1rIex4X6w==",
+      "license": "MIT"
+    },
+    "node_modules/@types/estree-jsx": {
+      "version": "1.0.5",
+      "resolved": "https://registry.npmjs.org/@types/estree-jsx/-/estree-jsx-1.0.5.tgz",
+      "integrity": "sha512-52CcUVNFyfb1A2ALocQw/Dd1BQFNmSdkuC3BkZ6iqhdMfQz7JWOFRuJFloOzjk+6WijU56m9oKXFAXc7o3Towg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "*"
+      }
+    },
+    "node_modules/@types/fontkit": {
+      "version": "2.0.8",
+      "resolved": "https://registry.npmjs.org/@types/fontkit/-/fontkit-2.0.8.tgz",
+      "integrity": "sha512-wN+8bYxIpJf+5oZdrdtaX04qUuWHcKxcDEgRS9Qm9ZClSHjzEn13SxUC+5eRM+4yXIeTYk8mTzLAWGF64847ew==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/node": "*"
+      }
+    },
+    "node_modules/@types/hast": {
+      "version": "3.0.4",
+      "resolved": "https://registry.npmjs.org/@types/hast/-/hast-3.0.4.tgz",
+      "integrity": "sha512-WPs+bbQw5aCj+x6laNGWLH3wviHtoCv/P3+otBhbOhJgG8qtpdAMlTCxLtsTWA7LH1Oh/bFCHsBn0TPS5m30EQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "*"
+      }
+    },
+    "node_modules/@types/js-yaml": {
+      "version": "4.0.9",
+      "resolved": "https://registry.npmjs.org/@types/js-yaml/-/js-yaml-4.0.9.tgz",
+      "integrity": "sha512-k4MGaQl5TGo/iipqb2UDG2UwjXziSWkh0uysQelTlJpX1qGlpUZYm8PnO4DxG1qBomtJUdYJ6qR6xdIah10JLg==",
+      "license": "MIT"
+    },
+    "node_modules/@types/mdast": {
+      "version": "4.0.4",
+      "resolved": "https://registry.npmjs.org/@types/mdast/-/mdast-4.0.4.tgz",
+      "integrity": "sha512-kGaNbPh1k7AFzgpud/gMdvIm5xuECykRR+JnWKQno9TAXVa6WIVCGTPvYGekIDL4uwCZQSYbUxNBSb1aUo79oA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "*"
+      }
+    },
+    "node_modules/@types/mdx": {
+      "version": "2.0.13",
+      "resolved": "https://registry.npmjs.org/@types/mdx/-/mdx-2.0.13.tgz",
+      "integrity": "sha512-+OWZQfAYyio6YkJb3HLxDrvnx6SWWDbC0zVPfBRzUk0/nqoDyf6dNxQi3eArPe8rJ473nobTMQ/8Zk+LxJ+Yuw==",
+      "license": "MIT"
+    },
+    "node_modules/@types/ms": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@types/ms/-/ms-2.1.0.tgz",
+      "integrity": "sha512-GsCCIZDE/p3i96vtEqx+7dBUGXrc7zeSK3wwPHIaRThS+9OhWIXRqzs4d6k1SVU8g91DrNRWxWUGhp5KXQb2VA==",
+      "license": "MIT"
+    },
+    "node_modules/@types/nlcst": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/@types/nlcst/-/nlcst-2.0.3.tgz",
+      "integrity": "sha512-vSYNSDe6Ix3q+6Z7ri9lyWqgGhJTmzRjZRqyq15N0Z/1/UnVsno9G/N40NBijoYx2seFDIl0+B2mgAb9mezUCA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "*"
+      }
+    },
+    "node_modules/@types/node": {
+      "version": "24.2.1",
+      "resolved": "https://registry.npmjs.org/@types/node/-/node-24.2.1.tgz",
+      "integrity": "sha512-DRh5K+ka5eJic8CjH7td8QpYEV6Zo10gfRkjHCO3weqZHWDtAaSTFtl4+VMqOJ4N5jcuhZ9/l+yy8rVgw7BQeQ==",
+      "license": "MIT",
+      "dependencies": {
+        "undici-types": "~7.10.0"
+      }
+    },
+    "node_modules/@types/sax": {
+      "version": "1.2.7",
+      "resolved": "https://registry.npmjs.org/@types/sax/-/sax-1.2.7.tgz",
+      "integrity": "sha512-rO73L89PJxeYM3s3pPPjiPgVVcymqU490g0YO5n5By0k2Erzj6tay/4lr1CHAAU4JyOWd1rpQ8bCf6cZfHU96A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/node": "*"
+      }
+    },
+    "node_modules/@types/unist": {
+      "version": "3.0.3",
+      "resolved": "https://registry.npmjs.org/@types/unist/-/unist-3.0.3.tgz",
+      "integrity": "sha512-ko/gIFJRv177XgZsZcBwnqJN5x/Gien8qNOn0D5bQU/zAzVf9Zt3BlcUiLqhV9y4ARk0GbT3tnUiPNgnTXzc/Q==",
+      "license": "MIT"
+    },
+    "node_modules/@ungap/structured-clone": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/@ungap/structured-clone/-/structured-clone-1.3.0.tgz",
+      "integrity": "sha512-WmoN8qaIAo7WTYWbAZuG8PYEhn5fkz7dZrqTBZ7dtt//lL2Gwms1IcnQ5yHqjDfX8Ft5j4YzDM23f87zBfDe9g==",
+      "license": "ISC"
+    },
+    "node_modules/acorn": {
+      "version": "8.15.0",
+      "resolved": "https://registry.npmjs.org/acorn/-/acorn-8.15.0.tgz",
+      "integrity": "sha512-NZyJarBfL7nWwIq+FDL6Zp/yHEhePMNnnJ0y3qfieCrmNvYct8uvtiV41UvlSe6apAfk0fY1FbWx+NwfmpvtTg==",
+      "license": "MIT",
+      "bin": {
+        "acorn": "bin/acorn"
+      },
+      "engines": {
+        "node": ">=0.4.0"
+      }
+    },
+    "node_modules/acorn-jsx": {
+      "version": "5.3.2",
+      "resolved": "https://registry.npmjs.org/acorn-jsx/-/acorn-jsx-5.3.2.tgz",
+      "integrity": "sha512-rq9s+JNhf0IChjtDXxllJ7g41oZk5SlXtp0LHwyA5cejwn7vKmKp4pPri6YEePv2PU65sAsegbXtIinmDFDXgQ==",
+      "license": "MIT",
+      "peerDependencies": {
+        "acorn": "^6.0.0 || ^7.0.0 || ^8.0.0"
+      }
+    },
+    "node_modules/ansi-align": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/ansi-align/-/ansi-align-3.0.1.tgz",
+      "integrity": "sha512-IOfwwBF5iczOjp/WeY4YxyjqAFMQoZufdQWDd19SEExbVLNXqvpzSJ/M7Za4/sCPmQ0+GRquoA7bGcINcxew6w==",
+      "license": "ISC",
+      "dependencies": {
+        "string-width": "^4.1.0"
+      }
+    },
+    "node_modules/ansi-align/node_modules/ansi-regex": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-5.0.1.tgz",
+      "integrity": "sha512-quJQXlTSUGL2LH9SUXo8VwsY4soanhgo6LNSm84E1LBcE8s3O0wpdiRzyR9z/ZZJMlMWv37qOOb9pdJlMUEKFQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/ansi-align/node_modules/emoji-regex": {
+      "version": "8.0.0",
+      "resolved": "https://registry.npmjs.org/emoji-regex/-/emoji-regex-8.0.0.tgz",
+      "integrity": "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A==",
+      "license": "MIT"
+    },
+    "node_modules/ansi-align/node_modules/string-width": {
+      "version": "4.2.3",
+      "resolved": "https://registry.npmjs.org/string-width/-/string-width-4.2.3.tgz",
+      "integrity": "sha512-wKyQRQpjJ0sIp62ErSZdGsjMJWsap5oRNihHhu6G7JVO/9jIB6UyevL+tXuOqrng8j/cxKTWyWUwvSTriiZz/g==",
+      "license": "MIT",
+      "dependencies": {
+        "emoji-regex": "^8.0.0",
+        "is-fullwidth-code-point": "^3.0.0",
+        "strip-ansi": "^6.0.1"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/ansi-align/node_modules/strip-ansi": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-6.0.1.tgz",
+      "integrity": "sha512-Y38VPSHcqkFrCpFnQ9vuSXmquuv5oXOKpGeT6aGrr3o3Gc9AlVa6JBfUSOCnbxGGZF+/0ooI7KrPuUSztUdU5A==",
+      "license": "MIT",
+      "dependencies": {
+        "ansi-regex": "^5.0.1"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/ansi-regex": {
+      "version": "6.1.0",
+      "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-6.1.0.tgz",
+      "integrity": "sha512-7HSX4QQb4CspciLpVFwyRe79O3xsIZDDLER21kERQ71oaPodF8jL725AgJMFAYbooIqolJoRLuM81SpeUkpkvA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/chalk/ansi-regex?sponsor=1"
+      }
+    },
+    "node_modules/ansi-styles": {
+      "version": "6.2.1",
+      "resolved": "https://registry.npmjs.org/ansi-styles/-/ansi-styles-6.2.1.tgz",
+      "integrity": "sha512-bN798gFfQX+viw3R7yrGWRqnrN2oRkEkUjjl4JNn4E8GxxbjtG3FbrEIIY3l8/hrwUwIeCZvi4QuOTP4MErVug==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/chalk/ansi-styles?sponsor=1"
+      }
+    },
+    "node_modules/anymatch": {
+      "version": "3.1.3",
+      "resolved": "https://registry.npmjs.org/anymatch/-/anymatch-3.1.3.tgz",
+      "integrity": "sha512-KMReFUr0B4t+D+OBkjR3KYqvocp2XaSzO55UcB6mgQMd3KbcE+mWTyvVV7D/zsdEbNnV6acZUutkiHQXvTr1Rw==",
+      "license": "ISC",
+      "dependencies": {
+        "normalize-path": "^3.0.0",
+        "picomatch": "^2.0.4"
+      },
+      "engines": {
+        "node": ">= 8"
+      }
+    },
+    "node_modules/anymatch/node_modules/picomatch": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/picomatch/-/picomatch-2.3.1.tgz",
+      "integrity": "sha512-JU3teHTNjmE2VCGFzuY8EXzCDVwEqB2a8fsIvwaStHhAWJEeVd1o1QD80CU6+ZdEXXSLbSsuLwJjkCBWqRQUVA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8.6"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/jonschlinkert"
+      }
+    },
+    "node_modules/arg": {
+      "version": "5.0.2",
+      "resolved": "https://registry.npmjs.org/arg/-/arg-5.0.2.tgz",
+      "integrity": "sha512-PYjyFOLKQ9y57JvQ6QLo8dAgNqswh8M1RMJYdQduT6xbWSgK36P/Z/v+p888pM69jMMfS8Xd8F6I1kQ/I9HUGg==",
+      "license": "MIT"
+    },
+    "node_modules/argparse": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/argparse/-/argparse-2.0.1.tgz",
+      "integrity": "sha512-8+9WqebbFzpX9OR+Wa6O29asIogeRMzcGtAINdpMHHyAg10f05aSFVBbcEqGf/PXw1EjAZ+q2/bEBg3DvurK3Q==",
+      "license": "Python-2.0"
+    },
+    "node_modules/aria-query": {
+      "version": "5.3.2",
+      "resolved": "https://registry.npmjs.org/aria-query/-/aria-query-5.3.2.tgz",
+      "integrity": "sha512-COROpnaoap1E2F000S62r6A60uHZnmlvomhfyT2DlTcrY1OrBKn2UhH7qn5wTC9zMvD0AY7csdPSNwKP+7WiQw==",
+      "license": "Apache-2.0",
+      "engines": {
+        "node": ">= 0.4"
+      }
+    },
+    "node_modules/array-iterate": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/array-iterate/-/array-iterate-2.0.1.tgz",
+      "integrity": "sha512-I1jXZMjAgCMmxT4qxXfPXa6SthSoE8h6gkSI9BGGNv8mP8G/v0blc+qFnZu6K42vTOiuME596QaLO0TP3Lk0xg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/astring": {
+      "version": "1.9.0",
+      "resolved": "https://registry.npmjs.org/astring/-/astring-1.9.0.tgz",
+      "integrity": "sha512-LElXdjswlqjWrPpJFg1Fx4wpkOCxj1TDHlSV4PlaRxHGWko024xICaa97ZkMfs6DRKlCguiAI+rbXv5GWwXIkg==",
+      "license": "MIT",
+      "bin": {
+        "astring": "bin/astring"
+      }
+    },
+    "node_modules/astro": {
+      "version": "5.13.0",
+      "resolved": "https://registry.npmjs.org/astro/-/astro-5.13.0.tgz",
+      "integrity": "sha512-kWahyvrrxUtgxFRRWSH5X0DESvgg4ZZ0fk6tU7blVZRgmj4PY79nzfaXFT+N+Ac2vWXX7eYUPYs1kLLk5IjBfQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@astrojs/compiler": "^2.12.2",
+        "@astrojs/internal-helpers": "0.7.1",
+        "@astrojs/markdown-remark": "6.3.5",
+        "@astrojs/telemetry": "3.3.0",
+        "@capsizecss/unpack": "^2.4.0",
+        "@oslojs/encoding": "^1.1.0",
+        "@rollup/pluginutils": "^5.1.4",
+        "acorn": "^8.14.1",
+        "aria-query": "^5.3.2",
+        "axobject-query": "^4.1.0",
+        "boxen": "8.0.1",
+        "ci-info": "^4.2.0",
+        "clsx": "^2.1.1",
+        "common-ancestor-path": "^1.0.1",
+        "cookie": "^1.0.2",
+        "cssesc": "^3.0.0",
+        "debug": "^4.4.0",
+        "deterministic-object-hash": "^2.0.2",
+        "devalue": "^5.1.1",
+        "diff": "^5.2.0",
+        "dlv": "^1.1.3",
+        "dset": "^3.1.4",
+        "es-module-lexer": "^1.6.0",
+        "esbuild": "^0.25.0",
+        "estree-walker": "^3.0.3",
+        "flattie": "^1.1.1",
+        "fontace": "~0.3.0",
+        "github-slugger": "^2.0.0",
+        "html-escaper": "3.0.3",
+        "http-cache-semantics": "^4.1.1",
+        "import-meta-resolve": "^4.1.0",
+        "js-yaml": "^4.1.0",
+        "kleur": "^4.1.5",
+        "magic-string": "^0.30.17",
+        "magicast": "^0.3.5",
+        "mrmime": "^2.0.1",
+        "neotraverse": "^0.6.18",
+        "p-limit": "^6.2.0",
+        "p-queue": "^8.1.0",
+        "package-manager-detector": "^1.1.0",
+        "picomatch": "^4.0.2",
+        "prompts": "^2.4.2",
+        "rehype": "^13.0.2",
+        "semver": "^7.7.1",
+        "shiki": "^3.2.1",
+        "smol-toml": "^1.3.4",
+        "tinyexec": "^0.3.2",
+        "tinyglobby": "^0.2.12",
+        "tsconfck": "^3.1.5",
+        "ultrahtml": "^1.6.0",
+        "unifont": "~0.5.0",
+        "unist-util-visit": "^5.0.0",
+        "unstorage": "^1.15.0",
+        "vfile": "^6.0.3",
+        "vite": "^6.3.4",
+        "vitefu": "^1.0.6",
+        "xxhash-wasm": "^1.1.0",
+        "yargs-parser": "^21.1.1",
+        "yocto-spinner": "^0.2.1",
+        "zod": "^3.24.4",
+        "zod-to-json-schema": "^3.24.5",
+        "zod-to-ts": "^1.2.0"
+      },
+      "bin": {
+        "astro": "astro.js"
+      },
+      "engines": {
+        "node": "18.20.8 || ^20.3.0 || >=22.0.0",
+        "npm": ">=9.6.5",
+        "pnpm": ">=7.1.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/astrodotbuild"
+      },
+      "optionalDependencies": {
+        "sharp": "^0.33.3"
+      }
+    },
+    "node_modules/astro-expressive-code": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/astro-expressive-code/-/astro-expressive-code-0.41.3.tgz",
+      "integrity": "sha512-u+zHMqo/QNLE2eqYRCrK3+XMlKakv33Bzuz+56V1gs8H0y6TZ0hIi3VNbIxeTn51NLn+mJfUV/A0kMNfE4rANw==",
+      "license": "MIT",
+      "dependencies": {
+        "rehype-expressive-code": "^0.41.3"
+      },
+      "peerDependencies": {
+        "astro": "^4.0.0-beta || ^5.0.0-beta || ^3.3.0"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-darwin-arm64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-darwin-arm64/-/sharp-darwin-arm64-0.33.5.tgz",
+      "integrity": "sha512-UT4p+iz/2H4twwAoLCqfA9UH5pI6DggwKEGuaPy7nCVQ8ZsiY5PIcrRvD1DzuY3qYL07NtIQcWnBSY/heikIFQ==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-darwin-arm64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-darwin-x64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-darwin-x64/-/sharp-darwin-x64-0.33.5.tgz",
+      "integrity": "sha512-fyHac4jIc1ANYGRDxtiqelIbdWkIuQaI84Mv45KvGRRxSAa7o7d1ZKAOBaYbnepLC1WqxfpimdeWfvqqSGwR2Q==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-darwin-x64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-darwin-arm64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-darwin-arm64/-/sharp-libvips-darwin-arm64-1.0.4.tgz",
+      "integrity": "sha512-XblONe153h0O2zuFfTAbQYAX2JhYmDHeWikp1LM9Hul9gVPjFY427k6dFEcOL72O01QxQsWi761svJ/ev9xEDg==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-darwin-x64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-darwin-x64/-/sharp-libvips-darwin-x64-1.0.4.tgz",
+      "integrity": "sha512-xnGR8YuZYfJGmWPvmlunFaWJsb9T/AO2ykoP3Fz/0X5XV2aoYBPkX6xqCQvUTKKiLddarLaxpzNe+b1hjeWHAQ==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linux-arm": {
+      "version": "1.0.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-arm/-/sharp-libvips-linux-arm-1.0.5.tgz",
+      "integrity": "sha512-gvcC4ACAOPRNATg/ov8/MnbxFDJqf/pDePbBnuBDcjsI8PssmjoKMAz4LtLaVi+OnSb5FK/yIOamqDwGmXW32g==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linux-arm64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-arm64/-/sharp-libvips-linux-arm64-1.0.4.tgz",
+      "integrity": "sha512-9B+taZ8DlyyqzZQnoeIvDVR/2F4EbMepXMc/NdVbkzsJbzkUjhXv/70GQJ7tdLA4YJgNP25zukcxpX2/SueNrA==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linux-s390x": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-s390x/-/sharp-libvips-linux-s390x-1.0.4.tgz",
+      "integrity": "sha512-u7Wz6ntiSSgGSGcjZ55im6uvTrOxSIS8/dgoVMoiGE9I6JAfU50yH5BoDlYA1tcuGS7g/QNtetJnxA6QEsCVTA==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linux-x64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linux-x64/-/sharp-libvips-linux-x64-1.0.4.tgz",
+      "integrity": "sha512-MmWmQ3iPFZr0Iev+BAgVMb3ZyC4KeFc3jFxnNbEPas60e1cIfevbtuyf9nDGIzOaW9PdnDciJm+wFFaTlj5xYw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linuxmusl-arm64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linuxmusl-arm64/-/sharp-libvips-linuxmusl-arm64-1.0.4.tgz",
+      "integrity": "sha512-9Ti+BbTYDcsbp4wfYib8Ctm1ilkugkA/uscUn6UXK1ldpC1JjiXbLfFZtRlBhjPZ5o1NCLiDbg8fhUPKStHoTA==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-libvips-linuxmusl-x64": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@img/sharp-libvips-linuxmusl-x64/-/sharp-libvips-linuxmusl-x64-1.0.4.tgz",
+      "integrity": "sha512-viYN1KX9m+/hGkJtvYYp+CCLgnJXwiQB39damAO7WMdKWlIhmYTfHjwSbQeUK/20vY154mwezd9HflVFM1wVSw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linux-arm": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-arm/-/sharp-linux-arm-0.33.5.tgz",
+      "integrity": "sha512-JTS1eldqZbJxjvKaAkxhZmBqPRGmxgu+qFKSInv8moZ2AmT5Yib3EQ1c6gp493HvrvV8QgdOXdyaIBrhvFhBMQ==",
+      "cpu": [
+        "arm"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-arm": "1.0.5"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linux-arm64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-arm64/-/sharp-linux-arm64-0.33.5.tgz",
+      "integrity": "sha512-JMVv+AMRyGOHtO1RFBiJy/MBsgz0x4AWrT6QoEVVTyh1E39TrCUpTRI7mx9VksGX4awWASxqCYLCV4wBZHAYxA==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-arm64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linux-s390x": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-s390x/-/sharp-linux-s390x-0.33.5.tgz",
+      "integrity": "sha512-y/5PCd+mP4CA/sPDKl2961b+C9d+vPAveS33s6Z3zfASk2j5upL6fXVPZi7ztePZ5CuH+1kW8JtvxgbuXHRa4Q==",
+      "cpu": [
+        "s390x"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-s390x": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linux-x64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linux-x64/-/sharp-linux-x64-0.33.5.tgz",
+      "integrity": "sha512-opC+Ok5pRNAzuvq1AG0ar+1owsu842/Ab+4qvU879ippJBHvyY5n2mxF1izXqkPYlGuP/M556uh53jRLJmzTWA==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linux-x64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linuxmusl-arm64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linuxmusl-arm64/-/sharp-linuxmusl-arm64-0.33.5.tgz",
+      "integrity": "sha512-XrHMZwGQGvJg2V/oRSUfSAfjfPxO+4DkiRh6p2AFjLQztWUuY/o8Mq0eMQVIY7HJ1CDQUJlxGGZRw1a5bqmd1g==",
+      "cpu": [
+        "arm64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linuxmusl-arm64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-linuxmusl-x64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-linuxmusl-x64/-/sharp-linuxmusl-x64-0.33.5.tgz",
+      "integrity": "sha512-WT+d/cgqKkkKySYmqoZ8y3pxx7lx9vVejxW/W4DOFMYVSkErR+w7mf2u8m/y4+xHe7yY9DAXQMWQhpnMuFfScw==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0",
+      "optional": true,
+      "os": [
+        "linux"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-libvips-linuxmusl-x64": "1.0.4"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-wasm32": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-wasm32/-/sharp-wasm32-0.33.5.tgz",
+      "integrity": "sha512-ykUW4LVGaMcU9lu9thv85CbRMAwfeadCJHRsg2GmeRa/cJxsVY9Rbd57JcMxBkKHag5U/x7TSBpScF4U8ElVzg==",
+      "cpu": [
+        "wasm32"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later AND MIT",
+      "optional": true,
+      "dependencies": {
+        "@emnapi/runtime": "^1.2.0"
+      },
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-win32-ia32": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-win32-ia32/-/sharp-win32-ia32-0.33.5.tgz",
+      "integrity": "sha512-T36PblLaTwuVJ/zw/LaH0PdZkRz5rd3SmMHX8GSmR7vtNSP5Z6bQkExdSK7xGWyxLw4sUknBuugTelgw2faBbQ==",
+      "cpu": [
+        "ia32"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/@img/sharp-win32-x64": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/@img/sharp-win32-x64/-/sharp-win32-x64-0.33.5.tgz",
+      "integrity": "sha512-MpY/o8/8kj+EcnxwvrP4aTJSWw/aZ7JIGR4aBeZkZw5B7/Jn+tY9/VNwtcoGmdT7GfggGIU4kygOMSbYnOrAbg==",
+      "cpu": [
+        "x64"
+      ],
+      "license": "Apache-2.0 AND LGPL-3.0-or-later",
+      "optional": true,
+      "os": [
+        "win32"
+      ],
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      }
+    },
+    "node_modules/astro/node_modules/sharp": {
+      "version": "0.33.5",
+      "resolved": "https://registry.npmjs.org/sharp/-/sharp-0.33.5.tgz",
+      "integrity": "sha512-haPVm1EkS9pgvHrQ/F3Xy+hgcuMV0Wm9vfIBSiwZ05k+xgb0PkBQpGsAA/oWdDobNaZTH5ppvHtzCFbnSEwHVw==",
+      "hasInstallScript": true,
+      "license": "Apache-2.0",
+      "optional": true,
+      "dependencies": {
+        "color": "^4.2.3",
+        "detect-libc": "^2.0.3",
+        "semver": "^7.6.3"
+      },
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-darwin-arm64": "0.33.5",
+        "@img/sharp-darwin-x64": "0.33.5",
+        "@img/sharp-libvips-darwin-arm64": "1.0.4",
+        "@img/sharp-libvips-darwin-x64": "1.0.4",
+        "@img/sharp-libvips-linux-arm": "1.0.5",
+        "@img/sharp-libvips-linux-arm64": "1.0.4",
+        "@img/sharp-libvips-linux-s390x": "1.0.4",
+        "@img/sharp-libvips-linux-x64": "1.0.4",
+        "@img/sharp-libvips-linuxmusl-arm64": "1.0.4",
+        "@img/sharp-libvips-linuxmusl-x64": "1.0.4",
+        "@img/sharp-linux-arm": "0.33.5",
+        "@img/sharp-linux-arm64": "0.33.5",
+        "@img/sharp-linux-s390x": "0.33.5",
+        "@img/sharp-linux-x64": "0.33.5",
+        "@img/sharp-linuxmusl-arm64": "0.33.5",
+        "@img/sharp-linuxmusl-x64": "0.33.5",
+        "@img/sharp-wasm32": "0.33.5",
+        "@img/sharp-win32-ia32": "0.33.5",
+        "@img/sharp-win32-x64": "0.33.5"
+      }
+    },
+    "node_modules/axobject-query": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/axobject-query/-/axobject-query-4.1.0.tgz",
+      "integrity": "sha512-qIj0G9wZbMGNLjLmg1PT6v2mE9AH2zlnADJD/2tC6E00hgmhUOfEB6greHPAfLRSufHqROIUTkw6E+M3lH0PTQ==",
+      "license": "Apache-2.0",
+      "engines": {
+        "node": ">= 0.4"
+      }
+    },
+    "node_modules/bail": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/bail/-/bail-2.0.2.tgz",
+      "integrity": "sha512-0xO6mYd7JB2YesxDKplafRpsiOzPt9V02ddPCLbY1xYGPOX24NTyN50qnUxgCPcSoYMhKpAuBTjQoRZCAkUDRw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/base-64": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/base-64/-/base-64-1.0.0.tgz",
+      "integrity": "sha512-kwDPIFCGx0NZHog36dj+tHiwP4QMzsZ3AgMViUBKI0+V5n4U0ufTCUMhnQ04diaRI8EX/QcPfql7zlhZ7j4zgg==",
+      "license": "MIT"
+    },
+    "node_modules/base64-js": {
+      "version": "1.5.1",
+      "resolved": "https://registry.npmjs.org/base64-js/-/base64-js-1.5.1.tgz",
+      "integrity": "sha512-AKpaYlHn8t4SVbOHCy+b5+KKgvR4vrsD8vbvrbiQJps7fKDTkjkDry6ji0rUJjC0kzbNePLwzxq8iypo41qeWA==",
+      "funding": [
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/feross"
+        },
+        {
+          "type": "patreon",
+          "url": "https://www.patreon.com/feross"
+        },
+        {
+          "type": "consulting",
+          "url": "https://feross.org/support"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/bcp-47": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/bcp-47/-/bcp-47-2.1.0.tgz",
+      "integrity": "sha512-9IIS3UPrvIa1Ej+lVDdDwO7zLehjqsaByECw0bu2RRGP73jALm6FYbzI5gWbgHLvNdkvfXB5YrSbocZdOS0c0w==",
+      "license": "MIT",
+      "dependencies": {
+        "is-alphabetical": "^2.0.0",
+        "is-alphanumerical": "^2.0.0",
+        "is-decimal": "^2.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/bcp-47-match": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/bcp-47-match/-/bcp-47-match-2.0.3.tgz",
+      "integrity": "sha512-JtTezzbAibu8G0R9op9zb3vcWZd9JF6M0xOYGPn0fNCd7wOpRB1mU2mH9T8gaBGbAAyIIVgB2G7xG0GP98zMAQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/blob-to-buffer": {
+      "version": "1.2.9",
+      "resolved": "https://registry.npmjs.org/blob-to-buffer/-/blob-to-buffer-1.2.9.tgz",
+      "integrity": "sha512-BF033y5fN6OCofD3vgHmNtwZWRcq9NLyyxyILx9hfMy1sXYy4ojFl765hJ2lP0YaN2fuxPaLO2Vzzoxy0FLFFA==",
+      "funding": [
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/feross"
+        },
+        {
+          "type": "patreon",
+          "url": "https://www.patreon.com/feross"
+        },
+        {
+          "type": "consulting",
+          "url": "https://feross.org/support"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/boolbase": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/boolbase/-/boolbase-1.0.0.tgz",
+      "integrity": "sha512-JZOSA7Mo9sNGB8+UjSgzdLtokWAky1zbztM3WRLCbZ70/3cTANmQmOdR7y2g+J0e2WXywy1yS468tY+IruqEww==",
+      "license": "ISC"
+    },
+    "node_modules/boxen": {
+      "version": "8.0.1",
+      "resolved": "https://registry.npmjs.org/boxen/-/boxen-8.0.1.tgz",
+      "integrity": "sha512-F3PH5k5juxom4xktynS7MoFY+NUWH5LC4CnH11YB8NPew+HLpmBLCybSAEyb2F+4pRXhuhWqFesoQd6DAyc2hw==",
+      "license": "MIT",
+      "dependencies": {
+        "ansi-align": "^3.0.1",
+        "camelcase": "^8.0.0",
+        "chalk": "^5.3.0",
+        "cli-boxes": "^3.0.0",
+        "string-width": "^7.2.0",
+        "type-fest": "^4.21.0",
+        "widest-line": "^5.0.0",
+        "wrap-ansi": "^9.0.0"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/brotli": {
+      "version": "1.3.3",
+      "resolved": "https://registry.npmjs.org/brotli/-/brotli-1.3.3.tgz",
+      "integrity": "sha512-oTKjJdShmDuGW94SyyaoQvAjf30dZaHnjJ8uAF+u2/vGJkJbJPJAT1gDiOJP5v1Zb6f9KEyW/1HpuaWIXtGHPg==",
+      "license": "MIT",
+      "dependencies": {
+        "base64-js": "^1.1.2"
+      }
+    },
+    "node_modules/camelcase": {
+      "version": "8.0.0",
+      "resolved": "https://registry.npmjs.org/camelcase/-/camelcase-8.0.0.tgz",
+      "integrity": "sha512-8WB3Jcas3swSvjIeA2yvCJ+Miyz5l1ZmB6HFb9R1317dt9LCQoswg/BGrmAmkWVEszSrrg4RwmO46qIm2OEnSA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/ccount": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/ccount/-/ccount-2.0.1.tgz",
+      "integrity": "sha512-eyrF0jiFpY+3drT6383f1qhkbGsLSifNAjA61IUjZjmLCWjItY6LB9ft9YhoDgwfmclB2zhu51Lc7+95b8NRAg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/chalk": {
+      "version": "5.5.0",
+      "resolved": "https://registry.npmjs.org/chalk/-/chalk-5.5.0.tgz",
+      "integrity": "sha512-1tm8DTaJhPBG3bIkVeZt1iZM9GfSX2lzOeDVZH9R9ffRHpmHvxZ/QhgQH/aDTkswQVt+YHdXAdS/In/30OjCbg==",
+      "license": "MIT",
+      "engines": {
+        "node": "^12.17.0 || ^14.13 || >=16.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/chalk/chalk?sponsor=1"
+      }
+    },
+    "node_modules/character-entities": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/character-entities/-/character-entities-2.0.2.tgz",
+      "integrity": "sha512-shx7oQ0Awen/BRIdkjkvz54PnEEI/EjwXDSIZp86/KKdbafHh1Df/RYGBhn4hbe2+uKC9FnT5UCEdyPz3ai9hQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/character-entities-html4": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/character-entities-html4/-/character-entities-html4-2.1.0.tgz",
+      "integrity": "sha512-1v7fgQRj6hnSwFpq1Eu0ynr/CDEw0rXo2B61qXrLNdHZmPKgb7fqS1a2JwF0rISo9q77jDI8VMEHoApn8qDoZA==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/character-entities-legacy": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/character-entities-legacy/-/character-entities-legacy-3.0.0.tgz",
+      "integrity": "sha512-RpPp0asT/6ufRm//AJVwpViZbGM/MkjQFxJccQRHmISF/22NBtsHqAWmL+/pmkPWoIUJdWyeVleTl1wydHATVQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/character-reference-invalid": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/character-reference-invalid/-/character-reference-invalid-2.0.1.tgz",
+      "integrity": "sha512-iBZ4F4wRbyORVsu0jPV7gXkOsGYjGHPmAyv+HiHG8gi5PtC9KI2j1+v8/tlibRvjoWX027ypmG/n0HtO5t7unw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/chokidar": {
+      "version": "4.0.3",
+      "resolved": "https://registry.npmjs.org/chokidar/-/chokidar-4.0.3.tgz",
+      "integrity": "sha512-Qgzu8kfBvo+cA4962jnP1KkS6Dop5NS6g7R5LFYJr4b8Ub94PPQXUksCw9PvXoeXPRRddRNC5C1JQUR2SMGtnA==",
+      "license": "MIT",
+      "dependencies": {
+        "readdirp": "^4.0.1"
+      },
+      "engines": {
+        "node": ">= 14.16.0"
+      },
+      "funding": {
+        "url": "https://paulmillr.com/funding/"
+      }
+    },
+    "node_modules/ci-info": {
+      "version": "4.3.0",
+      "resolved": "https://registry.npmjs.org/ci-info/-/ci-info-4.3.0.tgz",
+      "integrity": "sha512-l+2bNRMiQgcfILUi33labAZYIWlH1kWDp+ecNo5iisRKrbm0xcRyCww71/YU0Fkw0mAFpz9bJayXPjey6vkmaQ==",
+      "funding": [
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/sibiraj-s"
+        }
+      ],
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/cli-boxes": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/cli-boxes/-/cli-boxes-3.0.0.tgz",
+      "integrity": "sha512-/lzGpEWL/8PfI0BmBOPRwp0c/wFNX1RdUML3jK/RcSBA9T8mZDdQpqYBKtCFTOfQbwPqWEOpjqW+Fnayc0969g==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=10"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/clone": {
+      "version": "2.1.2",
+      "resolved": "https://registry.npmjs.org/clone/-/clone-2.1.2.tgz",
+      "integrity": "sha512-3Pe/CF1Nn94hyhIYpjtiLhdCoEoz0DqQ+988E9gmeEdQZlojxnOb74wctFyuwWQHzqyf9X7C7MG8juUpqBJT8w==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=0.8"
+      }
+    },
+    "node_modules/clsx": {
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/clsx/-/clsx-2.1.1.tgz",
+      "integrity": "sha512-eYm0QWBtUrBWZWG0d386OGAw16Z995PiOVo2B7bjWSbHedGl5e0ZWaq65kOGgUSNesEIDkB9ISbTg/JK9dhCZA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/collapse-white-space": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/collapse-white-space/-/collapse-white-space-2.1.0.tgz",
+      "integrity": "sha512-loKTxY1zCOuG4j9f6EPnuyyYkf58RnhhWTvRoZEokgB+WbdXehfjFviyOVYkqzEWz1Q5kRiZdBYS5SwxbQYwzw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/color": {
+      "version": "4.2.3",
+      "resolved": "https://registry.npmjs.org/color/-/color-4.2.3.tgz",
+      "integrity": "sha512-1rXeuUUiGGrykh+CeBdu5Ie7OJwinCgQY0bc7GCRxy5xVHy+moaqkpL/jqQq0MtQOeYcrqEz4abc5f0KtU7W4A==",
+      "license": "MIT",
+      "dependencies": {
+        "color-convert": "^2.0.1",
+        "color-string": "^1.9.0"
+      },
+      "engines": {
+        "node": ">=12.5.0"
+      }
+    },
+    "node_modules/color-convert": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/color-convert/-/color-convert-2.0.1.tgz",
+      "integrity": "sha512-RRECPsj7iu/xb5oKYcsFHSppFNnsj/52OVTRKb4zP5onXwVF3zVmmToNcOfGC+CRDpfK/U584fMg38ZHCaElKQ==",
+      "license": "MIT",
+      "dependencies": {
+        "color-name": "~1.1.4"
+      },
+      "engines": {
+        "node": ">=7.0.0"
+      }
+    },
+    "node_modules/color-name": {
+      "version": "1.1.4",
+      "resolved": "https://registry.npmjs.org/color-name/-/color-name-1.1.4.tgz",
+      "integrity": "sha512-dOy+3AuW3a2wNbZHIuMZpTcgjGuLU/uBL/ubcZF9OXbDo8ff4O8yVp5Bf0efS8uEoYo5q4Fx7dY9OgQGXgAsQA==",
+      "license": "MIT"
+    },
+    "node_modules/color-string": {
+      "version": "1.9.1",
+      "resolved": "https://registry.npmjs.org/color-string/-/color-string-1.9.1.tgz",
+      "integrity": "sha512-shrVawQFojnZv6xM40anx4CkoDP+fZsw/ZerEMsW/pyzsRbElpsL/DBVW7q3ExxwusdNXI3lXpuhEZkzs8p5Eg==",
+      "license": "MIT",
+      "dependencies": {
+        "color-name": "^1.0.0",
+        "simple-swizzle": "^0.2.2"
+      }
+    },
+    "node_modules/comma-separated-tokens": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/comma-separated-tokens/-/comma-separated-tokens-2.0.3.tgz",
+      "integrity": "sha512-Fu4hJdvzeylCfQPp9SGWidpzrMs7tTrlu6Vb8XGaRGck8QSNZJJp538Wrb60Lax4fPwR64ViY468OIUTbRlGZg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/common-ancestor-path": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/common-ancestor-path/-/common-ancestor-path-1.0.1.tgz",
+      "integrity": "sha512-L3sHRo1pXXEqX8VU28kfgUY+YGsk09hPqZiZmLacNib6XNTCM8ubYeT7ryXQw8asB1sKgcU5lkB7ONug08aB8w==",
+      "license": "ISC"
+    },
+    "node_modules/cookie": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/cookie/-/cookie-1.0.2.tgz",
+      "integrity": "sha512-9Kr/j4O16ISv8zBBhJoi4bXOYNTkFLOqSL3UDB0njXxCXNezjeyVrJyGOWtgfs/q2km1gwBcfH8q1yEGoMYunA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/cookie-es": {
+      "version": "1.2.2",
+      "resolved": "https://registry.npmjs.org/cookie-es/-/cookie-es-1.2.2.tgz",
+      "integrity": "sha512-+W7VmiVINB+ywl1HGXJXmrqkOhpKrIiVZV6tQuV54ZyQC7MMuBt81Vc336GMLoHBq5hV/F9eXgt5Mnx0Rha5Fg==",
+      "license": "MIT"
+    },
+    "node_modules/cross-fetch": {
+      "version": "3.2.0",
+      "resolved": "https://registry.npmjs.org/cross-fetch/-/cross-fetch-3.2.0.tgz",
+      "integrity": "sha512-Q+xVJLoGOeIMXZmbUK4HYk+69cQH6LudR0Vu/pRm2YlU/hDV9CiS0gKUMaWY5f2NeUH9C1nV3bsTlCo0FsTV1Q==",
+      "license": "MIT",
+      "dependencies": {
+        "node-fetch": "^2.7.0"
+      }
+    },
+    "node_modules/crossws": {
+      "version": "0.3.5",
+      "resolved": "https://registry.npmjs.org/crossws/-/crossws-0.3.5.tgz",
+      "integrity": "sha512-ojKiDvcmByhwa8YYqbQI/hg7MEU0NC03+pSdEq4ZUnZR9xXpwk7E43SMNGkn+JxJGPFtNvQ48+vV2p+P1ml5PA==",
+      "license": "MIT",
+      "dependencies": {
+        "uncrypto": "^0.1.3"
+      }
+    },
+    "node_modules/css-selector-parser": {
+      "version": "3.1.3",
+      "resolved": "https://registry.npmjs.org/css-selector-parser/-/css-selector-parser-3.1.3.tgz",
+      "integrity": "sha512-gJMigczVZqYAk0hPVzx/M4Hm1D9QOtqkdQk9005TNzDIUGzo5cnHEDiKUT7jGPximL/oYb+LIitcHFQ4aKupxg==",
+      "funding": [
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/mdevils"
+        },
+        {
+          "type": "patreon",
+          "url": "https://patreon.com/mdevils"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/css-tree": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/css-tree/-/css-tree-3.1.0.tgz",
+      "integrity": "sha512-0eW44TGN5SQXU1mWSkKwFstI/22X2bG1nYzZTYMAWjylYURhse752YgbE4Cx46AC+bAvI+/dYTPRk1LqSUnu6w==",
+      "license": "MIT",
+      "dependencies": {
+        "mdn-data": "2.12.2",
+        "source-map-js": "^1.0.1"
+      },
+      "engines": {
+        "node": "^10 || ^12.20.0 || ^14.13.0 || >=15.0.0"
+      }
+    },
+    "node_modules/cssesc": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/cssesc/-/cssesc-3.0.0.tgz",
+      "integrity": "sha512-/Tb/JcjK111nNScGob5MNtsntNM1aCNUDipB/TkwZFhyDrrE47SOx/18wF2bbjgc3ZzCSKW1T5nt5EbFoAz/Vg==",
+      "license": "MIT",
+      "bin": {
+        "cssesc": "bin/cssesc"
+      },
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/debug": {
+      "version": "4.4.1",
+      "resolved": "https://registry.npmjs.org/debug/-/debug-4.4.1.tgz",
+      "integrity": "sha512-KcKCqiftBJcZr++7ykoDIEwSa3XWowTfNPo92BYxjXiyYEVrUQh2aLyhxBCwww+heortUFxEJYcRzosstTEBYQ==",
+      "license": "MIT",
+      "dependencies": {
+        "ms": "^2.1.3"
+      },
+      "engines": {
+        "node": ">=6.0"
+      },
+      "peerDependenciesMeta": {
+        "supports-color": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/decode-named-character-reference": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/decode-named-character-reference/-/decode-named-character-reference-1.2.0.tgz",
+      "integrity": "sha512-c6fcElNV6ShtZXmsgNgFFV5tVX2PaV4g+MOAkb8eXHvn6sryJBrZa9r0zV6+dtTyoCKxtDy5tyQ5ZwQuidtd+Q==",
+      "license": "MIT",
+      "dependencies": {
+        "character-entities": "^2.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/defu": {
+      "version": "6.1.4",
+      "resolved": "https://registry.npmjs.org/defu/-/defu-6.1.4.tgz",
+      "integrity": "sha512-mEQCMmwJu317oSz8CwdIOdwf3xMif1ttiM8LTufzc3g6kR+9Pe236twL8j3IYT1F7GfRgGcW6MWxzZjLIkuHIg==",
+      "license": "MIT"
+    },
+    "node_modules/dequal": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/dequal/-/dequal-2.0.3.tgz",
+      "integrity": "sha512-0je+qPKHEMohvfRTCEo3CrPG6cAzAYgmzKyxRiYSSDkS6eGJdyVJm7WaYA5ECaAD9wLB2T4EEeymA5aFVcYXCA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/destr": {
+      "version": "2.0.5",
+      "resolved": "https://registry.npmjs.org/destr/-/destr-2.0.5.tgz",
+      "integrity": "sha512-ugFTXCtDZunbzasqBxrK93Ik/DRYsO6S/fedkWEMKqt04xZ4csmnmwGDBAb07QWNaGMAmnTIemsYZCksjATwsA==",
+      "license": "MIT"
+    },
+    "node_modules/detect-libc": {
+      "version": "2.0.4",
+      "resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.0.4.tgz",
+      "integrity": "sha512-3UDv+G9CsCKO1WKMGw9fwq/SWJYbI0c5Y7LU1AXYoDdbhE2AHQ6N6Nb34sG8Fj7T5APy8qXDCKuuIHd1BR0tVA==",
+      "license": "Apache-2.0",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/deterministic-object-hash": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/deterministic-object-hash/-/deterministic-object-hash-2.0.2.tgz",
+      "integrity": "sha512-KxektNH63SrbfUyDiwXqRb1rLwKt33AmMv+5Nhsw1kqZ13SJBRTgZHtGbE+hH3a1mVW1cz+4pqSWVPAtLVXTzQ==",
+      "license": "MIT",
+      "dependencies": {
+        "base-64": "^1.0.0"
+      },
+      "engines": {
+        "node": ">=18"
+      }
+    },
+    "node_modules/devalue": {
+      "version": "5.1.1",
+      "resolved": "https://registry.npmjs.org/devalue/-/devalue-5.1.1.tgz",
+      "integrity": "sha512-maua5KUiapvEwiEAe+XnlZ3Rh0GD+qI1J/nb9vrJc3muPXvcF/8gXYTWF76+5DAqHyDUtOIImEuo0YKE9mshVw==",
+      "license": "MIT"
+    },
+    "node_modules/devlop": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/devlop/-/devlop-1.1.0.tgz",
+      "integrity": "sha512-RWmIqhcFf1lRYBvNmr7qTNuyCt/7/ns2jbpp1+PalgE/rDQcBT0fioSMUpJ93irlUhC5hrg4cYqe6U+0ImW0rA==",
+      "license": "MIT",
+      "dependencies": {
+        "dequal": "^2.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/dfa": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/dfa/-/dfa-1.2.0.tgz",
+      "integrity": "sha512-ED3jP8saaweFTjeGX8HQPjeC1YYyZs98jGNZx6IiBvxW7JG5v492kamAQB3m2wop07CvU/RQmzcKr6bgcC5D/Q==",
+      "license": "MIT"
+    },
+    "node_modules/diff": {
+      "version": "5.2.0",
+      "resolved": "https://registry.npmjs.org/diff/-/diff-5.2.0.tgz",
+      "integrity": "sha512-uIFDxqpRZGZ6ThOk84hEfqWoHx2devRFvpTZcTHur85vImfaxUbTW9Ryh4CpCuDnToOP1CEtXKIgytHBPVff5A==",
+      "license": "BSD-3-Clause",
+      "engines": {
+        "node": ">=0.3.1"
+      }
+    },
+    "node_modules/direction": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/direction/-/direction-2.0.1.tgz",
+      "integrity": "sha512-9S6m9Sukh1cZNknO1CWAr2QAWsbKLafQiyM5gZ7VgXHeuaoUwffKN4q6NC4A/Mf9iiPlOXQEKW/Mv/mh9/3YFA==",
+      "license": "MIT",
+      "bin": {
+        "direction": "cli.js"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/dlv": {
+      "version": "1.1.3",
+      "resolved": "https://registry.npmjs.org/dlv/-/dlv-1.1.3.tgz",
+      "integrity": "sha512-+HlytyjlPKnIG8XuRG8WvmBP8xs8P71y+SKKS6ZXWoEgLuePxtDoUEiH7WkdePWrQ5JBpE6aoVqfZfJUQkjXwA==",
+      "license": "MIT"
+    },
+    "node_modules/dset": {
+      "version": "3.1.4",
+      "resolved": "https://registry.npmjs.org/dset/-/dset-3.1.4.tgz",
+      "integrity": "sha512-2QF/g9/zTaPDc3BjNcVTGoBbXBgYfMTTceLaYcFJ/W9kggFUkhxD/hMEeuLKbugyef9SqAx8cpgwlIP/jinUTA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/emoji-regex": {
+      "version": "10.4.0",
+      "resolved": "https://registry.npmjs.org/emoji-regex/-/emoji-regex-10.4.0.tgz",
+      "integrity": "sha512-EC+0oUMY1Rqm4O6LLrgjtYDvcVYTy7chDnM4Q7030tP4Kwj3u/pR6gP9ygnp2CJMK5Gq+9Q2oqmrFJAz01DXjw==",
+      "license": "MIT"
+    },
+    "node_modules/entities": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/entities/-/entities-6.0.1.tgz",
+      "integrity": "sha512-aN97NXWF6AWBTahfVOIrB/NShkzi5H7F9r1s9mD3cDj4Ko5f2qhhVoYMibXF7GlLveb/D2ioWay8lxI97Ven3g==",
+      "license": "BSD-2-Clause",
+      "engines": {
+        "node": ">=0.12"
+      },
+      "funding": {
+        "url": "https://github.com/fb55/entities?sponsor=1"
+      }
+    },
+    "node_modules/es-module-lexer": {
+      "version": "1.7.0",
+      "resolved": "https://registry.npmjs.org/es-module-lexer/-/es-module-lexer-1.7.0.tgz",
+      "integrity": "sha512-jEQoCwk8hyb2AZziIOLhDqpm5+2ww5uIE6lkO/6jcOCusfk6LhMHpXXfBLXTZ7Ydyt0j4VoUQv6uGNYbdW+kBA==",
+      "license": "MIT"
+    },
+    "node_modules/esast-util-from-estree": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/esast-util-from-estree/-/esast-util-from-estree-2.0.0.tgz",
+      "integrity": "sha512-4CyanoAudUSBAn5K13H4JhsMH6L9ZP7XbLVe/dKybkxMO7eDyLsT8UHl9TRNrU2Gr9nz+FovfSIjuXWJ81uVwQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-visit": "^2.0.0",
+        "unist-util-position-from-estree": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/esast-util-from-js": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/esast-util-from-js/-/esast-util-from-js-2.0.1.tgz",
+      "integrity": "sha512-8Ja+rNJ0Lt56Pcf3TAmpBZjmx8ZcK5Ts4cAzIOjsjevg9oSXJnl6SUQ2EevU8tv3h6ZLWmoKL5H4fgWvdvfETw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "acorn": "^8.0.0",
+        "esast-util-from-estree": "^2.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/esbuild": {
+      "version": "0.25.9",
+      "resolved": "https://registry.npmjs.org/esbuild/-/esbuild-0.25.9.tgz",
+      "integrity": "sha512-CRbODhYyQx3qp7ZEwzxOk4JBqmD/seJrzPa/cGjY1VtIn5E09Oi9/dB4JwctnfZ8Q8iT7rioVv5k/FNT/uf54g==",
+      "hasInstallScript": true,
+      "license": "MIT",
+      "bin": {
+        "esbuild": "bin/esbuild"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "optionalDependencies": {
+        "@esbuild/aix-ppc64": "0.25.9",
+        "@esbuild/android-arm": "0.25.9",
+        "@esbuild/android-arm64": "0.25.9",
+        "@esbuild/android-x64": "0.25.9",
+        "@esbuild/darwin-arm64": "0.25.9",
+        "@esbuild/darwin-x64": "0.25.9",
+        "@esbuild/freebsd-arm64": "0.25.9",
+        "@esbuild/freebsd-x64": "0.25.9",
+        "@esbuild/linux-arm": "0.25.9",
+        "@esbuild/linux-arm64": "0.25.9",
+        "@esbuild/linux-ia32": "0.25.9",
+        "@esbuild/linux-loong64": "0.25.9",
+        "@esbuild/linux-mips64el": "0.25.9",
+        "@esbuild/linux-ppc64": "0.25.9",
+        "@esbuild/linux-riscv64": "0.25.9",
+        "@esbuild/linux-s390x": "0.25.9",
+        "@esbuild/linux-x64": "0.25.9",
+        "@esbuild/netbsd-arm64": "0.25.9",
+        "@esbuild/netbsd-x64": "0.25.9",
+        "@esbuild/openbsd-arm64": "0.25.9",
+        "@esbuild/openbsd-x64": "0.25.9",
+        "@esbuild/openharmony-arm64": "0.25.9",
+        "@esbuild/sunos-x64": "0.25.9",
+        "@esbuild/win32-arm64": "0.25.9",
+        "@esbuild/win32-ia32": "0.25.9",
+        "@esbuild/win32-x64": "0.25.9"
+      }
+    },
+    "node_modules/escape-string-regexp": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-5.0.0.tgz",
+      "integrity": "sha512-/veY75JbMK4j1yjvuUxuVsiS/hr/4iHs9FTT6cgTexxdE0Ly/glccBAkloH/DofkjRbZU3bnoj38mOmhkZ0lHw==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/estree-util-attach-comments": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/estree-util-attach-comments/-/estree-util-attach-comments-3.0.0.tgz",
+      "integrity": "sha512-cKUwm/HUcTDsYh/9FgnuFqpfquUbwIqwKM26BVCGDPVgvaCl/nDCCjUfiLlx6lsEZ3Z4RFxNbOQ60pkaEwFxGw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-util-build-jsx": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/estree-util-build-jsx/-/estree-util-build-jsx-3.0.1.tgz",
+      "integrity": "sha512-8U5eiL6BTrPxp/CHbs2yMgP8ftMhR5ww1eIKoWRMlqvltHF8fZn5LRDvTKuxD3DUn+shRbLGqXemcP51oFCsGQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-is-identifier-name": "^3.0.0",
+        "estree-walker": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-util-is-identifier-name": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/estree-util-is-identifier-name/-/estree-util-is-identifier-name-3.0.0.tgz",
+      "integrity": "sha512-hFtqIDZTIUZ9BXLb8y4pYGyk6+wekIivNVTcmvk8NoOh+VeRn5y6cEHzbURrWbfp1fIqdVipilzj+lfaadNZmg==",
+      "license": "MIT",
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-util-scope": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/estree-util-scope/-/estree-util-scope-1.0.0.tgz",
+      "integrity": "sha512-2CAASclonf+JFWBNJPndcOpA8EMJwa0Q8LUFJEKqXLW6+qBvbFZuF5gItbQOs/umBUkjviCSDCbBwU2cXbmrhQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "devlop": "^1.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-util-to-js": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/estree-util-to-js/-/estree-util-to-js-2.0.0.tgz",
+      "integrity": "sha512-WDF+xj5rRWmD5tj6bIqRi6CkLIXbbNQUcxQHzGysQzvHmdYG2G7p/Tf0J0gpxGgkeMZNTIjT/AoSvC9Xehcgdg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "astring": "^1.8.0",
+        "source-map": "^0.7.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-util-visit": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/estree-util-visit/-/estree-util-visit-2.0.0.tgz",
+      "integrity": "sha512-m5KgiH85xAhhW8Wta0vShLcUvOsh3LLPI2YVwcbio1l7E09NTLL1EyMZFM1OyWowoH0skScNbhOPl4kcBgzTww==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/estree-walker": {
+      "version": "3.0.3",
+      "resolved": "https://registry.npmjs.org/estree-walker/-/estree-walker-3.0.3.tgz",
+      "integrity": "sha512-7RUKfXgSMMkzt6ZuXmqapOurLGPPfgj6l9uRZ7lRGolvk0y2yocc35LdcxKC5PQZdn2DMqioAQ2NoWcrTKmm6g==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0"
+      }
+    },
+    "node_modules/eventemitter3": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/eventemitter3/-/eventemitter3-5.0.1.tgz",
+      "integrity": "sha512-GWkBvjiSZK87ELrYOSESUYeVIc9mvLLf/nXalMOS5dYrgZq9o5OVkbZAVM06CVxYsCwH9BDZFPlQTlPA1j4ahA==",
+      "license": "MIT"
+    },
+    "node_modules/expressive-code": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/expressive-code/-/expressive-code-0.41.3.tgz",
+      "integrity": "sha512-YLnD62jfgBZYrXIPQcJ0a51Afv9h8VlWqEGK9uU2T5nL/5rb8SnA86+7+mgCZe5D34Tff5RNEA5hjNVJYHzrFg==",
+      "license": "MIT",
+      "dependencies": {
+        "@expressive-code/core": "^0.41.3",
+        "@expressive-code/plugin-frames": "^0.41.3",
+        "@expressive-code/plugin-shiki": "^0.41.3",
+        "@expressive-code/plugin-text-markers": "^0.41.3"
+      }
+    },
+    "node_modules/extend": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/extend/-/extend-3.0.2.tgz",
+      "integrity": "sha512-fjquC59cD7CyW6urNXK0FBufkZcoiGG80wTuPujX590cB5Ttln20E2UB4S/WARVqhXffZl2LNgS+gQdPIIim/g==",
+      "license": "MIT"
+    },
+    "node_modules/fast-deep-equal": {
+      "version": "3.1.3",
+      "resolved": "https://registry.npmjs.org/fast-deep-equal/-/fast-deep-equal-3.1.3.tgz",
+      "integrity": "sha512-f3qQ9oQy9j2AhBe/H9VC91wLmKBCCU/gDOnKNAYG5hswO7BLKj09Hc5HYNz9cGI++xlpDCIgDaitVs03ATR84Q==",
+      "license": "MIT"
+    },
+    "node_modules/fdir": {
+      "version": "6.4.6",
+      "resolved": "https://registry.npmjs.org/fdir/-/fdir-6.4.6.tgz",
+      "integrity": "sha512-hiFoqpyZcfNm1yc4u8oWCf9A2c4D3QjCrks3zmoVKVxpQRzmPNar1hUJcBG2RQHvEVGDN+Jm81ZheVLAQMK6+w==",
+      "license": "MIT",
+      "peerDependencies": {
+        "picomatch": "^3 || ^4"
+      },
+      "peerDependenciesMeta": {
+        "picomatch": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/flattie": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/flattie/-/flattie-1.1.1.tgz",
+      "integrity": "sha512-9UbaD6XdAL97+k/n+N7JwX46K/M6Zc6KcFYskrYL8wbBV/Uyk0CTAMY0VT+qiK5PM7AIc9aTWYtq65U7T+aCNQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/fontace": {
+      "version": "0.3.0",
+      "resolved": "https://registry.npmjs.org/fontace/-/fontace-0.3.0.tgz",
+      "integrity": "sha512-czoqATrcnxgWb/nAkfyIrRp6Q8biYj7nGnL6zfhTcX+JKKpWHFBnb8uNMw/kZr7u++3Y3wYSYoZgHkCcsuBpBg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/fontkit": "^2.0.8",
+        "fontkit": "^2.0.4"
+      }
+    },
+    "node_modules/fontkit": {
+      "version": "2.0.4",
+      "resolved": "https://registry.npmjs.org/fontkit/-/fontkit-2.0.4.tgz",
+      "integrity": "sha512-syetQadaUEDNdxdugga9CpEYVaQIxOwk7GlwZWWZ19//qW4zE5bknOKeMBDYAASwnpaSHKJITRLMF9m1fp3s6g==",
+      "license": "MIT",
+      "dependencies": {
+        "@swc/helpers": "^0.5.12",
+        "brotli": "^1.3.2",
+        "clone": "^2.1.2",
+        "dfa": "^1.2.0",
+        "fast-deep-equal": "^3.1.3",
+        "restructure": "^3.0.0",
+        "tiny-inflate": "^1.0.3",
+        "unicode-properties": "^1.4.0",
+        "unicode-trie": "^2.0.0"
+      }
+    },
+    "node_modules/fsevents": {
+      "version": "2.3.3",
+      "resolved": "https://registry.npmjs.org/fsevents/-/fsevents-2.3.3.tgz",
+      "integrity": "sha512-5xoDfX+fL7faATnagmWPpbFtwh/R77WmMMqqHGS65C3vvB0YHrgF+B1YmZ3441tMj5n63k0212XNoJwzlhffQw==",
+      "hasInstallScript": true,
+      "license": "MIT",
+      "optional": true,
+      "os": [
+        "darwin"
+      ],
+      "engines": {
+        "node": "^8.16.0 || ^10.6.0 || >=11.0.0"
+      }
+    },
+    "node_modules/get-east-asian-width": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/get-east-asian-width/-/get-east-asian-width-1.3.0.tgz",
+      "integrity": "sha512-vpeMIQKxczTD/0s2CdEWHcb0eeJe6TFjxb+J5xgX7hScxqrGuyjmv4c1D4A/gelKfyox0gJJwIHF+fLjeaM8kQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/github-slugger": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/github-slugger/-/github-slugger-2.0.0.tgz",
+      "integrity": "sha512-IaOQ9puYtjrkq7Y0Ygl9KDZnrf/aiUJYUpVf89y8kyaxbRG7Y1SrX/jaumrv81vc61+kiMempujsM3Yw7w5qcw==",
+      "license": "ISC"
+    },
+    "node_modules/h3": {
+      "version": "1.15.4",
+      "resolved": "https://registry.npmjs.org/h3/-/h3-1.15.4.tgz",
+      "integrity": "sha512-z5cFQWDffyOe4vQ9xIqNfCZdV4p//vy6fBnr8Q1AWnVZ0teurKMG66rLj++TKwKPUP3u7iMUvrvKaEUiQw2QWQ==",
+      "license": "MIT",
+      "dependencies": {
+        "cookie-es": "^1.2.2",
+        "crossws": "^0.3.5",
+        "defu": "^6.1.4",
+        "destr": "^2.0.5",
+        "iron-webcrypto": "^1.2.1",
+        "node-mock-http": "^1.0.2",
+        "radix3": "^1.1.2",
+        "ufo": "^1.6.1",
+        "uncrypto": "^0.1.3"
+      }
+    },
+    "node_modules/hast-util-embedded": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-embedded/-/hast-util-embedded-3.0.0.tgz",
+      "integrity": "sha512-naH8sld4Pe2ep03qqULEtvYr7EjrLK2QHY8KJR6RJkTUjPGObe1vnx585uzem2hGra+s1q08DZZpfgDVYRbaXA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-is-element": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-format": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/hast-util-format/-/hast-util-format-1.1.0.tgz",
+      "integrity": "sha512-yY1UDz6bC9rDvCWHpx12aIBGRG7krurX0p0Fm6pT547LwDIZZiNr8a+IHDogorAdreULSEzP82Nlv5SZkHZcjA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-embedded": "^3.0.0",
+        "hast-util-minify-whitespace": "^1.0.0",
+        "hast-util-phrasing": "^3.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "html-whitespace-sensitive-tag-names": "^3.0.0",
+        "unist-util-visit-parents": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-from-html": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/hast-util-from-html/-/hast-util-from-html-2.0.3.tgz",
+      "integrity": "sha512-CUSRHXyKjzHov8yKsQjGOElXy/3EKpyX56ELnkHH34vDVw1N1XSQ1ZcAvTyAPtGqLTuKP/uxM+aLkSPqF/EtMw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "devlop": "^1.1.0",
+        "hast-util-from-parse5": "^8.0.0",
+        "parse5": "^7.0.0",
+        "vfile": "^6.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-from-parse5": {
+      "version": "8.0.3",
+      "resolved": "https://registry.npmjs.org/hast-util-from-parse5/-/hast-util-from-parse5-8.0.3.tgz",
+      "integrity": "sha512-3kxEVkEKt0zvcZ3hCRYI8rqrgwtlIOFMWkbclACvjlDw8Li9S2hk/d51OI0nr/gIpdMHNepwgOKqZ/sy0Clpyg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "devlop": "^1.0.0",
+        "hastscript": "^9.0.0",
+        "property-information": "^7.0.0",
+        "vfile": "^6.0.0",
+        "vfile-location": "^5.0.0",
+        "web-namespaces": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-has-property": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-has-property/-/hast-util-has-property-3.0.0.tgz",
+      "integrity": "sha512-MNilsvEKLFpV604hwfhVStK0usFY/QmM5zX16bo7EjnAEGofr5YyI37kzopBlZJkHD4t887i+q/C8/tr5Q94cA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-is-body-ok-link": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/hast-util-is-body-ok-link/-/hast-util-is-body-ok-link-3.0.1.tgz",
+      "integrity": "sha512-0qpnzOBLztXHbHQenVB8uNuxTnm/QBFUOmdOSsEn7GnBtyY07+ENTWVFBAnXd/zEgd9/SUG3lRY7hSIBWRgGpQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-is-element": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-is-element/-/hast-util-is-element-3.0.0.tgz",
+      "integrity": "sha512-Val9mnv2IWpLbNPqc/pUem+a7Ipj2aHacCwgNfTiK0vJKl0LF+4Ba4+v1oPHFpf3bLYmreq0/l3Gud9S5OH42g==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-minify-whitespace": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/hast-util-minify-whitespace/-/hast-util-minify-whitespace-1.0.1.tgz",
+      "integrity": "sha512-L96fPOVpnclQE0xzdWb/D12VT5FabA7SnZOUMtL1DbXmYiHJMXZvFkIZfiMmTCNJHUeO2K9UYNXoVyfz+QHuOw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-embedded": "^3.0.0",
+        "hast-util-is-element": "^3.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "unist-util-is": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-parse-selector": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-parse-selector/-/hast-util-parse-selector-4.0.0.tgz",
+      "integrity": "sha512-wkQCkSYoOGCRKERFWcxMVMOcYE2K1AaNLU8DXS9arxnLOUEWbOXKXiJUNzEpqZ3JOKpnha3jkFrumEjVliDe7A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-phrasing": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/hast-util-phrasing/-/hast-util-phrasing-3.0.1.tgz",
+      "integrity": "sha512-6h60VfI3uBQUxHqTyMymMZnEbNl1XmEGtOxxKYL7stY2o601COo62AWAYBQR9lZbYXYSBoxag8UpPRXK+9fqSQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-embedded": "^3.0.0",
+        "hast-util-has-property": "^3.0.0",
+        "hast-util-is-body-ok-link": "^3.0.0",
+        "hast-util-is-element": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-raw": {
+      "version": "9.1.0",
+      "resolved": "https://registry.npmjs.org/hast-util-raw/-/hast-util-raw-9.1.0.tgz",
+      "integrity": "sha512-Y8/SBAHkZGoNkpzqqfCldijcuUKh7/su31kEBp67cFY09Wy0mTRgtsLYsiIxMJxlu0f6AA5SUTbDR8K0rxnbUw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "@ungap/structured-clone": "^1.0.0",
+        "hast-util-from-parse5": "^8.0.0",
+        "hast-util-to-parse5": "^8.0.0",
+        "html-void-elements": "^3.0.0",
+        "mdast-util-to-hast": "^13.0.0",
+        "parse5": "^7.0.0",
+        "unist-util-position": "^5.0.0",
+        "unist-util-visit": "^5.0.0",
+        "vfile": "^6.0.0",
+        "web-namespaces": "^2.0.0",
+        "zwitch": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-select": {
+      "version": "6.0.4",
+      "resolved": "https://registry.npmjs.org/hast-util-select/-/hast-util-select-6.0.4.tgz",
+      "integrity": "sha512-RqGS1ZgI0MwxLaKLDxjprynNzINEkRHY2i8ln4DDjgv9ZhcYVIHN9rlpiYsqtFwrgpYU361SyWDQcGNIBVu3lw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "bcp-47-match": "^2.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "css-selector-parser": "^3.0.0",
+        "devlop": "^1.0.0",
+        "direction": "^2.0.0",
+        "hast-util-has-property": "^3.0.0",
+        "hast-util-to-string": "^3.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "nth-check": "^2.0.0",
+        "property-information": "^7.0.0",
+        "space-separated-tokens": "^2.0.0",
+        "unist-util-visit": "^5.0.0",
+        "zwitch": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-estree": {
+      "version": "3.1.3",
+      "resolved": "https://registry.npmjs.org/hast-util-to-estree/-/hast-util-to-estree-3.1.3.tgz",
+      "integrity": "sha512-48+B/rJWAp0jamNbAAf9M7Uf//UVqAoMmgXhBdxTDJLGKY+LRnZ99qcG+Qjl5HfMpYNzS5v4EAwVEF34LeAj7w==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "@types/estree-jsx": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-attach-comments": "^3.0.0",
+        "estree-util-is-identifier-name": "^3.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "mdast-util-mdx-expression": "^2.0.0",
+        "mdast-util-mdx-jsx": "^3.0.0",
+        "mdast-util-mdxjs-esm": "^2.0.0",
+        "property-information": "^7.0.0",
+        "space-separated-tokens": "^2.0.0",
+        "style-to-js": "^1.0.0",
+        "unist-util-position": "^5.0.0",
+        "zwitch": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-html": {
+      "version": "9.0.5",
+      "resolved": "https://registry.npmjs.org/hast-util-to-html/-/hast-util-to-html-9.0.5.tgz",
+      "integrity": "sha512-OguPdidb+fbHQSU4Q4ZiLKnzWo8Wwsf5bZfbvu7//a9oTYoqD/fWpe96NuHkoS9h0ccGOTe0C4NGXdtS0iObOw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "ccount": "^2.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "html-void-elements": "^3.0.0",
+        "mdast-util-to-hast": "^13.0.0",
+        "property-information": "^7.0.0",
+        "space-separated-tokens": "^2.0.0",
+        "stringify-entities": "^4.0.0",
+        "zwitch": "^2.0.4"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-jsx-runtime": {
+      "version": "2.3.6",
+      "resolved": "https://registry.npmjs.org/hast-util-to-jsx-runtime/-/hast-util-to-jsx-runtime-2.3.6.tgz",
+      "integrity": "sha512-zl6s8LwNyo1P9uw+XJGvZtdFF1GdAkOg8ujOw+4Pyb76874fLps4ueHXDhXWdk6YHQ6OgUtinliG7RsYvCbbBg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-is-identifier-name": "^3.0.0",
+        "hast-util-whitespace": "^3.0.0",
+        "mdast-util-mdx-expression": "^2.0.0",
+        "mdast-util-mdx-jsx": "^3.0.0",
+        "mdast-util-mdxjs-esm": "^2.0.0",
+        "property-information": "^7.0.0",
+        "space-separated-tokens": "^2.0.0",
+        "style-to-js": "^1.0.0",
+        "unist-util-position": "^5.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-parse5": {
+      "version": "8.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-to-parse5/-/hast-util-to-parse5-8.0.0.tgz",
+      "integrity": "sha512-3KKrV5ZVI8if87DVSi1vDeByYrkGzg4mEfeu4alwgmmIeARiBLKCZS2uw5Gb6nU9x9Yufyj3iudm6i7nl52PFw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "devlop": "^1.0.0",
+        "property-information": "^6.0.0",
+        "space-separated-tokens": "^2.0.0",
+        "web-namespaces": "^2.0.0",
+        "zwitch": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-parse5/node_modules/property-information": {
+      "version": "6.5.0",
+      "resolved": "https://registry.npmjs.org/property-information/-/property-information-6.5.0.tgz",
+      "integrity": "sha512-PgTgs/BlvHxOu8QuEN7wi5A0OmXaBcHpmCSTehcs6Uuu9IkDIEo13Hy7n898RHfrQ49vKCoGeWZSaAK01nwVig==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/hast-util-to-string": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/hast-util-to-string/-/hast-util-to-string-3.0.1.tgz",
+      "integrity": "sha512-XelQVTDWvqcl3axRfI0xSeoVKzyIFPwsAGSLIsKdJKQMXDYJS4WYrBNF/8J7RdhIcFI2BOHgAifggsvsxp/3+A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-to-text": {
+      "version": "4.0.2",
+      "resolved": "https://registry.npmjs.org/hast-util-to-text/-/hast-util-to-text-4.0.2.tgz",
+      "integrity": "sha512-KK6y/BN8lbaq654j7JgBydev7wuNMcID54lkRav1P0CaE1e47P72AWWPiGKXTJU271ooYzcvTAn/Zt0REnvc7A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/unist": "^3.0.0",
+        "hast-util-is-element": "^3.0.0",
+        "unist-util-find-after": "^5.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hast-util-whitespace": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/hast-util-whitespace/-/hast-util-whitespace-3.0.0.tgz",
+      "integrity": "sha512-88JUN06ipLwsnv+dVn+OIYOvAuvBMy/Qoi6O7mQHxdPXpjy+Cd6xRkWwux7DKO+4sYILtLBRIKgsdpS2gQc7qw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/hastscript": {
+      "version": "9.0.1",
+      "resolved": "https://registry.npmjs.org/hastscript/-/hastscript-9.0.1.tgz",
+      "integrity": "sha512-g7df9rMFX/SPi34tyGCyUBREQoKkapwdY/T04Qn9TDWfHhAYt4/I0gMVirzK5wEzeUqIjEB+LXC/ypb7Aqno5w==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "comma-separated-tokens": "^2.0.0",
+        "hast-util-parse-selector": "^4.0.0",
+        "property-information": "^7.0.0",
+        "space-separated-tokens": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/html-escaper": {
+      "version": "3.0.3",
+      "resolved": "https://registry.npmjs.org/html-escaper/-/html-escaper-3.0.3.tgz",
+      "integrity": "sha512-RuMffC89BOWQoY0WKGpIhn5gX3iI54O6nRA0yC124NYVtzjmFWBIiFd8M0x+ZdX0P9R4lADg1mgP8C7PxGOWuQ==",
+      "license": "MIT"
+    },
+    "node_modules/html-void-elements": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/html-void-elements/-/html-void-elements-3.0.0.tgz",
+      "integrity": "sha512-bEqo66MRXsUGxWHV5IP0PUiAWwoEjba4VCzg0LjFJBpchPaTfyfCKTG6bc5F8ucKec3q5y6qOdGyYTSBEvhCrg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/html-whitespace-sensitive-tag-names": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/html-whitespace-sensitive-tag-names/-/html-whitespace-sensitive-tag-names-3.0.1.tgz",
+      "integrity": "sha512-q+310vW8zmymYHALr1da4HyXUQ0zgiIwIicEfotYPWGN0OJVEN/58IJ3A4GBYcEq3LGAZqKb+ugvP0GNB9CEAA==",
+      "license": "MIT",
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/http-cache-semantics": {
+      "version": "4.2.0",
+      "resolved": "https://registry.npmjs.org/http-cache-semantics/-/http-cache-semantics-4.2.0.tgz",
+      "integrity": "sha512-dTxcvPXqPvXBQpq5dUr6mEMJX4oIEFv6bwom3FDwKRDsuIjjJGANqhBuoAn9c1RQJIdAKav33ED65E2ys+87QQ==",
+      "license": "BSD-2-Clause"
+    },
+    "node_modules/i18next": {
+      "version": "23.16.8",
+      "resolved": "https://registry.npmjs.org/i18next/-/i18next-23.16.8.tgz",
+      "integrity": "sha512-06r/TitrM88Mg5FdUXAKL96dJMzgqLE5dv3ryBAra4KCwD9mJ4ndOTS95ZuymIGoE+2hzfdaMak2X11/es7ZWg==",
+      "funding": [
+        {
+          "type": "individual",
+          "url": "https://locize.com"
+        },
+        {
+          "type": "individual",
+          "url": "https://locize.com/i18next.html"
+        },
+        {
+          "type": "individual",
+          "url": "https://www.i18next.com/how-to/faq#i18next-is-awesome.-how-can-i-support-the-project"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "@babel/runtime": "^7.23.2"
+      }
+    },
+    "node_modules/import-meta-resolve": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/import-meta-resolve/-/import-meta-resolve-4.1.0.tgz",
+      "integrity": "sha512-I6fiaX09Xivtk+THaMfAwnA3MVA5Big1WHF1Dfx9hFuvNIWpXnorlkzhcQf6ehrqQiiZECRt1poOAkPmer3ruw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/inline-style-parser": {
+      "version": "0.2.4",
+      "resolved": "https://registry.npmjs.org/inline-style-parser/-/inline-style-parser-0.2.4.tgz",
+      "integrity": "sha512-0aO8FkhNZlj/ZIbNi7Lxxr12obT7cL1moPfE4tg1LkX7LlLfC6DeX4l2ZEud1ukP9jNQyNnfzQVqwbwmAATY4Q==",
+      "license": "MIT"
+    },
+    "node_modules/iron-webcrypto": {
+      "version": "1.2.1",
+      "resolved": "https://registry.npmjs.org/iron-webcrypto/-/iron-webcrypto-1.2.1.tgz",
+      "integrity": "sha512-feOM6FaSr6rEABp/eDfVseKyTMDt+KGpeB35SkVn9Tyn0CqvVsY3EwI0v5i8nMHyJnzCIQf7nsy3p41TPkJZhg==",
+      "license": "MIT",
+      "funding": {
+        "url": "https://github.com/sponsors/brc-dd"
+      }
+    },
+    "node_modules/is-alphabetical": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/is-alphabetical/-/is-alphabetical-2.0.1.tgz",
+      "integrity": "sha512-FWyyY60MeTNyeSRpkM2Iry0G9hpr7/9kD40mD/cGQEuilcZYS4okz8SN2Q6rLCJ8gbCt6fN+rC+6tMGS99LaxQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/is-alphanumerical": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/is-alphanumerical/-/is-alphanumerical-2.0.1.tgz",
+      "integrity": "sha512-hmbYhX/9MUMF5uh7tOXyK/n0ZvWpad5caBA17GsC6vyuCqaWliRG5K1qS9inmUhEMaOBIW7/whAnSwveW/LtZw==",
+      "license": "MIT",
+      "dependencies": {
+        "is-alphabetical": "^2.0.0",
+        "is-decimal": "^2.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/is-arrayish": {
+      "version": "0.3.2",
+      "resolved": "https://registry.npmjs.org/is-arrayish/-/is-arrayish-0.3.2.tgz",
+      "integrity": "sha512-eVRqCvVlZbuw3GrM63ovNSNAeA1K16kaR/LRY/92w0zxQ5/1YzwblUX652i4Xs9RwAGjW9d9y6X88t8OaAJfWQ==",
+      "license": "MIT"
+    },
+    "node_modules/is-decimal": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/is-decimal/-/is-decimal-2.0.1.tgz",
+      "integrity": "sha512-AAB9hiomQs5DXWcRB1rqsxGUstbRroFOPPVAomNk/3XHR5JyEZChOyTWe2oayKnsSsr/kcGqF+z6yuH6HHpN0A==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/is-docker": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/is-docker/-/is-docker-3.0.0.tgz",
+      "integrity": "sha512-eljcgEDlEns/7AXFosB5K/2nCM4P7FQPkGc/DWLy5rmFEWvZayGrik1d9/QIY5nJ4f9YsVvBkA6kJpHn9rISdQ==",
+      "license": "MIT",
+      "bin": {
+        "is-docker": "cli.js"
+      },
+      "engines": {
+        "node": "^12.20.0 || ^14.13.1 || >=16.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/is-fullwidth-code-point": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-3.0.0.tgz",
+      "integrity": "sha512-zymm5+u+sCsSWyD9qNaejV3DFvhCKclKdizYaJUuHA83RLjb7nSuGnddCHGv0hk+KY7BMAlsWeK4Ueg6EV6XQg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/is-hexadecimal": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/is-hexadecimal/-/is-hexadecimal-2.0.1.tgz",
+      "integrity": "sha512-DgZQp241c8oO6cA1SbTEWiXeoxV42vlcJxgH+B3hi1AiqqKruZR3ZGF8In3fj4+/y/7rHvlOZLZtgJ/4ttYGZg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/is-inside-container": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/is-inside-container/-/is-inside-container-1.0.0.tgz",
+      "integrity": "sha512-KIYLCCJghfHZxqjYBE7rEy0OBuTd5xCHS7tHVgvCLkx7StIoaxwNW3hCALgEUjFfeRk+MG/Qxmp/vtETEF3tRA==",
+      "license": "MIT",
+      "dependencies": {
+        "is-docker": "^3.0.0"
+      },
+      "bin": {
+        "is-inside-container": "cli.js"
+      },
+      "engines": {
+        "node": ">=14.16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/is-plain-obj": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/is-plain-obj/-/is-plain-obj-4.1.0.tgz",
+      "integrity": "sha512-+Pgi+vMuUNkJyExiMBt5IlFoMyKnr5zhJ4Uspz58WOhBF5QoIZkFyNHIbBAtHwzVAgk5RtndVNsDRN61/mmDqg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/is-wsl": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/is-wsl/-/is-wsl-3.1.0.tgz",
+      "integrity": "sha512-UcVfVfaK4Sc4m7X3dUSoHoozQGBEFeDC+zVo06t98xe8CzHSZZBekNXH+tu0NalHolcJ/QAGqS46Hef7QXBIMw==",
+      "license": "MIT",
+      "dependencies": {
+        "is-inside-container": "^1.0.0"
+      },
+      "engines": {
+        "node": ">=16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/js-yaml": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/js-yaml/-/js-yaml-4.1.0.tgz",
+      "integrity": "sha512-wpxZs9NoxZaJESJGIZTyDEaYpl0FKSA+FB9aJiyemKhMwkxQg63h4T1KJgUGHpTqPDNRcmmYLugrRjJlBtWvRA==",
+      "license": "MIT",
+      "dependencies": {
+        "argparse": "^2.0.1"
+      },
+      "bin": {
+        "js-yaml": "bin/js-yaml.js"
+      }
+    },
+    "node_modules/kleur": {
+      "version": "4.1.5",
+      "resolved": "https://registry.npmjs.org/kleur/-/kleur-4.1.5.tgz",
+      "integrity": "sha512-o+NO+8WrRiQEE4/7nwRJhN1HWpVmJm511pBHUxPLtp0BUISzlBplORYSmTclCnJvQq2tKu/sgl3xVpkc7ZWuQQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/klona": {
+      "version": "2.0.6",
+      "resolved": "https://registry.npmjs.org/klona/-/klona-2.0.6.tgz",
+      "integrity": "sha512-dhG34DXATL5hSxJbIexCft8FChFXtmskoZYnoPWjXQuebWYCNkVeV3KkGegCK9CP1oswI/vQibS2GY7Em/sJJA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">= 8"
+      }
+    },
+    "node_modules/longest-streak": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/longest-streak/-/longest-streak-3.1.0.tgz",
+      "integrity": "sha512-9Ri+o0JYgehTaVBBDoMqIl8GXtbWg711O3srftcHhZ0dqnETqLaoIK0x17fUw9rFSlK/0NlsKe0Ahhyl5pXE2g==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/lru-cache": {
+      "version": "10.4.3",
+      "resolved": "https://registry.npmjs.org/lru-cache/-/lru-cache-10.4.3.tgz",
+      "integrity": "sha512-JNAzZcXrCt42VGLuYz0zfAzDfAvJWW6AfYlDBQyDV5DClI2m5sAmK+OIO7s59XfsRsWHp02jAJrRadPRGTt6SQ==",
+      "license": "ISC"
+    },
+    "node_modules/magic-string": {
+      "version": "0.30.17",
+      "resolved": "https://registry.npmjs.org/magic-string/-/magic-string-0.30.17.tgz",
+      "integrity": "sha512-sNPKHvyjVf7gyjwS4xGTaW/mCnF8wnjtifKBEhxfZ7E/S8tQ0rssrwGNn6q8JH/ohItJfSQp9mBtQYuTlH5QnA==",
+      "license": "MIT",
+      "dependencies": {
+        "@jridgewell/sourcemap-codec": "^1.5.0"
+      }
+    },
+    "node_modules/magicast": {
+      "version": "0.3.5",
+      "resolved": "https://registry.npmjs.org/magicast/-/magicast-0.3.5.tgz",
+      "integrity": "sha512-L0WhttDl+2BOsybvEOLK7fW3UA0OQ0IQ2d6Zl2x/a6vVRs3bAY0ECOSHHeL5jD+SbOpOCUEi0y1DgHEn9Qn1AQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@babel/parser": "^7.25.4",
+        "@babel/types": "^7.25.4",
+        "source-map-js": "^1.2.0"
+      }
+    },
+    "node_modules/markdown-extensions": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/markdown-extensions/-/markdown-extensions-2.0.0.tgz",
+      "integrity": "sha512-o5vL7aDWatOTX8LzaS1WMoaoxIiLRQJuIKKe2wAw6IeULDHaqbiqiggmx+pKvZDb1Sj+pE46Sn1T7lCqfFtg1Q==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/markdown-table": {
+      "version": "3.0.4",
+      "resolved": "https://registry.npmjs.org/markdown-table/-/markdown-table-3.0.4.tgz",
+      "integrity": "sha512-wiYz4+JrLyb/DqW2hkFJxP7Vd7JuTDm77fvbM8VfEQdmSMqcImWeeRbHwZjBjIFki/VaMK2BhFi7oUUZeM5bqw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/mdast-util-definitions": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-definitions/-/mdast-util-definitions-6.0.0.tgz",
+      "integrity": "sha512-scTllyX6pnYNZH/AIp/0ePz6s4cZtARxImwoPJ7kS42n+MnVsI4XbnG6d4ibehRIldYMWM2LD7ImQblVhUejVQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "@types/unist": "^3.0.0",
+        "unist-util-visit": "^5.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-directive": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-directive/-/mdast-util-directive-3.1.0.tgz",
+      "integrity": "sha512-I3fNFt+DHmpWCYAT7quoM6lHf9wuqtI+oCOfvILnoicNIqjh5E3dEJWiXuYME2gNe8vl1iMQwyUHa7bgFmak6Q==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "@types/unist": "^3.0.0",
+        "ccount": "^2.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0",
+        "parse-entities": "^4.0.0",
+        "stringify-entities": "^4.0.0",
+        "unist-util-visit-parents": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-find-and-replace": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/mdast-util-find-and-replace/-/mdast-util-find-and-replace-3.0.2.tgz",
+      "integrity": "sha512-Tmd1Vg/m3Xz43afeNxDIhWRtFZgM2VLyaf4vSTYwudTyeuTneoL3qtWMA5jeLyz/O1vDJmmV4QuScFCA2tBPwg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "escape-string-regexp": "^5.0.0",
+        "unist-util-is": "^6.0.0",
+        "unist-util-visit-parents": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-from-markdown": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/mdast-util-from-markdown/-/mdast-util-from-markdown-2.0.2.tgz",
+      "integrity": "sha512-uZhTV/8NBuw0WHkPTrCqDOl0zVe1BIng5ZtHoDk49ME1qqcjYmmLmOf0gELgcRMxN4w2iuIeVso5/6QymSrgmA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "@types/unist": "^3.0.0",
+        "decode-named-character-reference": "^1.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-to-string": "^4.0.0",
+        "micromark": "^4.0.0",
+        "micromark-util-decode-numeric-character-reference": "^2.0.0",
+        "micromark-util-decode-string": "^2.0.0",
+        "micromark-util-normalize-identifier": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "unist-util-stringify-position": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm/-/mdast-util-gfm-3.1.0.tgz",
+      "integrity": "sha512-0ulfdQOM3ysHhCJ1p06l0b0VKlhU0wuQs3thxZQagjcjPrlFRqY215uZGHHJan9GEAXd9MbfPjFJz+qMkVR6zQ==",
+      "license": "MIT",
+      "dependencies": {
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-gfm-autolink-literal": "^2.0.0",
+        "mdast-util-gfm-footnote": "^2.0.0",
+        "mdast-util-gfm-strikethrough": "^2.0.0",
+        "mdast-util-gfm-table": "^2.0.0",
+        "mdast-util-gfm-task-list-item": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm-autolink-literal": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm-autolink-literal/-/mdast-util-gfm-autolink-literal-2.0.1.tgz",
+      "integrity": "sha512-5HVP2MKaP6L+G6YaxPNjuL0BPrq9orG3TsrZ9YXbA3vDw/ACI4MEsnoDpn6ZNm7GnZgtAcONJyPhOP8tNJQavQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "ccount": "^2.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-find-and-replace": "^3.0.0",
+        "micromark-util-character": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm-footnote": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm-footnote/-/mdast-util-gfm-footnote-2.1.0.tgz",
+      "integrity": "sha512-sqpDWlsHn7Ac9GNZQMeUzPQSMzR6Wv0WKRNvQRg0KqHh02fpTz69Qc1QSseNX29bhz1ROIyNyxExfawVKTm1GQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "devlop": "^1.1.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0",
+        "micromark-util-normalize-identifier": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm-strikethrough": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm-strikethrough/-/mdast-util-gfm-strikethrough-2.0.0.tgz",
+      "integrity": "sha512-mKKb915TF+OC5ptj5bJ7WFRPdYtuHv0yTRxK2tJvi+BDqbkiG7h7u/9SI89nRAYcmap2xHQL9D+QG/6wSrTtXg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm-table": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm-table/-/mdast-util-gfm-table-2.0.0.tgz",
+      "integrity": "sha512-78UEvebzz/rJIxLvE7ZtDd/vIQ0RHv+3Mh5DR96p7cS7HsBhYIICDBCu8csTNWNO6tBWfqXPWekRuj2FNOGOZg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "devlop": "^1.0.0",
+        "markdown-table": "^3.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-gfm-task-list-item": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-gfm-task-list-item/-/mdast-util-gfm-task-list-item-2.0.0.tgz",
+      "integrity": "sha512-IrtvNvjxC1o06taBAVJznEnkiHxLFTzgonUdy8hzFVeDun0uTjxxrRGVaNFqkU1wJR3RBPEfsxmU6jDWPofrTQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-mdx": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-mdx/-/mdast-util-mdx-3.0.0.tgz",
+      "integrity": "sha512-JfbYLAW7XnYTTbUsmpu0kdBUVe+yKVJZBItEjwyYJiDJuZ9w4eeaqks4HQO+R7objWgS2ymV60GYpI14Ug554w==",
+      "license": "MIT",
+      "dependencies": {
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-mdx-expression": "^2.0.0",
+        "mdast-util-mdx-jsx": "^3.0.0",
+        "mdast-util-mdxjs-esm": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-mdx-expression": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/mdast-util-mdx-expression/-/mdast-util-mdx-expression-2.0.1.tgz",
+      "integrity": "sha512-J6f+9hUp+ldTZqKRSg7Vw5V6MqjATc+3E4gf3CFNcuZNWD8XdyI6zQ8GqH7f8169MM6P7hMBRDVGnn7oHB9kXQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "@types/mdast": "^4.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-mdx-jsx": {
+      "version": "3.2.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-mdx-jsx/-/mdast-util-mdx-jsx-3.2.0.tgz",
+      "integrity": "sha512-lj/z8v0r6ZtsN/cGNNtemmmfoLAFZnjMbNyLzBafjzikOM+glrjNHPlf6lQDOTccj9n5b0PPihEBbhneMyGs1Q==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "@types/mdast": "^4.0.0",
+        "@types/unist": "^3.0.0",
+        "ccount": "^2.0.0",
+        "devlop": "^1.1.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0",
+        "parse-entities": "^4.0.0",
+        "stringify-entities": "^4.0.0",
+        "unist-util-stringify-position": "^4.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-mdxjs-esm": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/mdast-util-mdxjs-esm/-/mdast-util-mdxjs-esm-2.0.1.tgz",
+      "integrity": "sha512-EcmOpxsZ96CvlP03NghtH1EsLtr0n9Tm4lPUJUBccV9RwUOneqSycg19n5HGzCf+10LozMRSObtVr3ee1WoHtg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree-jsx": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "@types/mdast": "^4.0.0",
+        "devlop": "^1.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "mdast-util-to-markdown": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-phrasing": {
+      "version": "4.1.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-phrasing/-/mdast-util-phrasing-4.1.0.tgz",
+      "integrity": "sha512-TqICwyvJJpBwvGAMZjj4J2n0X8QWp21b9l0o7eXyVJ25YNWYbJDVIyD1bZXE6WtV6RmKJVYmQAKWa0zWOABz2w==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "unist-util-is": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-to-hast": {
+      "version": "13.2.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-to-hast/-/mdast-util-to-hast-13.2.0.tgz",
+      "integrity": "sha512-QGYKEuUsYT9ykKBCMOEDLsU5JRObWQusAolFMeko/tYPufNkRffBAQjIE+99jbA87xv6FgmjLtwjh9wBWajwAA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/mdast": "^4.0.0",
+        "@ungap/structured-clone": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-util-sanitize-uri": "^2.0.0",
+        "trim-lines": "^3.0.0",
+        "unist-util-position": "^5.0.0",
+        "unist-util-visit": "^5.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-to-markdown": {
+      "version": "2.1.2",
+      "resolved": "https://registry.npmjs.org/mdast-util-to-markdown/-/mdast-util-to-markdown-2.1.2.tgz",
+      "integrity": "sha512-xj68wMTvGXVOKonmog6LwyJKrYXZPvlwabaryTjLh9LuvovB/KAH+kvi8Gjj+7rJjsFi23nkUxRQv1KqSroMqA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "@types/unist": "^3.0.0",
+        "longest-streak": "^3.0.0",
+        "mdast-util-phrasing": "^4.0.0",
+        "mdast-util-to-string": "^4.0.0",
+        "micromark-util-classify-character": "^2.0.0",
+        "micromark-util-decode-string": "^2.0.0",
+        "unist-util-visit": "^5.0.0",
+        "zwitch": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdast-util-to-string": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/mdast-util-to-string/-/mdast-util-to-string-4.0.0.tgz",
+      "integrity": "sha512-0H44vDimn51F0YwvxSJSm0eCDOJTRlmN0R1yBh4HLj9wiV1Dn0QoXGbvFAWj2hSItVTlCmBF1hqKlIyUBVFLPg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/mdn-data": {
+      "version": "2.12.2",
+      "resolved": "https://registry.npmjs.org/mdn-data/-/mdn-data-2.12.2.tgz",
+      "integrity": "sha512-IEn+pegP1aManZuckezWCO+XZQDplx1366JoVhTpMpBB1sPey/SbveZQUosKiKiGYjg1wH4pMlNgXbCiYgihQA==",
+      "license": "CC0-1.0"
+    },
+    "node_modules/micromark": {
+      "version": "4.0.2",
+      "resolved": "https://registry.npmjs.org/micromark/-/micromark-4.0.2.tgz",
+      "integrity": "sha512-zpe98Q6kvavpCr1NPVSCMebCKfD7CA2NqZ+rykeNhONIJBpc1tFKt9hucLGwha3jNTNI8lHpctWJWoimVF4PfA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "@types/debug": "^4.0.0",
+        "debug": "^4.0.0",
+        "decode-named-character-reference": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-core-commonmark": "^2.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-chunked": "^2.0.0",
+        "micromark-util-combine-extensions": "^2.0.0",
+        "micromark-util-decode-numeric-character-reference": "^2.0.0",
+        "micromark-util-encode": "^2.0.0",
+        "micromark-util-normalize-identifier": "^2.0.0",
+        "micromark-util-resolve-all": "^2.0.0",
+        "micromark-util-sanitize-uri": "^2.0.0",
+        "micromark-util-subtokenize": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-core-commonmark": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/micromark-core-commonmark/-/micromark-core-commonmark-2.0.3.tgz",
+      "integrity": "sha512-RDBrHEMSxVFLg6xvnXmb1Ayr2WzLAWjeSATAoxwKYJV94TeNavgoIdA0a9ytzDSVzBy2YKFK+emCPOEibLeCrg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "decode-named-character-reference": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-factory-destination": "^2.0.0",
+        "micromark-factory-label": "^2.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-factory-title": "^2.0.0",
+        "micromark-factory-whitespace": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-chunked": "^2.0.0",
+        "micromark-util-classify-character": "^2.0.0",
+        "micromark-util-html-tag-name": "^2.0.0",
+        "micromark-util-normalize-identifier": "^2.0.0",
+        "micromark-util-resolve-all": "^2.0.0",
+        "micromark-util-subtokenize": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-extension-directive": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/micromark-extension-directive/-/micromark-extension-directive-3.0.2.tgz",
+      "integrity": "sha512-wjcXHgk+PPdmvR58Le9d7zQYWy+vKEU9Se44p2CrCDPiLr2FMyiT4Fyb5UFKFC66wGB3kPlgD7q3TnoqPS7SZA==",
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-factory-whitespace": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "parse-entities": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm/-/micromark-extension-gfm-3.0.0.tgz",
+      "integrity": "sha512-vsKArQsicm7t0z2GugkCKtZehqUm31oeGBV/KVSorWSy8ZlNAv7ytjFhvaryUiCUJYqs+NoE6AFhpQvBTM6Q4w==",
+      "license": "MIT",
+      "dependencies": {
+        "micromark-extension-gfm-autolink-literal": "^2.0.0",
+        "micromark-extension-gfm-footnote": "^2.0.0",
+        "micromark-extension-gfm-strikethrough": "^2.0.0",
+        "micromark-extension-gfm-table": "^2.0.0",
+        "micromark-extension-gfm-tagfilter": "^2.0.0",
+        "micromark-extension-gfm-task-list-item": "^2.0.0",
+        "micromark-util-combine-extensions": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-autolink-literal": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-autolink-literal/-/micromark-extension-gfm-autolink-literal-2.1.0.tgz",
+      "integrity": "sha512-oOg7knzhicgQ3t4QCjCWgTmfNhvQbDDnJeVu9v81r7NltNCVmhPy1fJRX27pISafdjL+SVc4d3l48Gb6pbRypw==",
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-sanitize-uri": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-footnote": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-footnote/-/micromark-extension-gfm-footnote-2.1.0.tgz",
+      "integrity": "sha512-/yPhxI1ntnDNsiHtzLKYnE3vf9JZ6cAisqVDauhp4CEHxlb4uoOTxOCJ+9s51bIB8U1N1FJ1RXOKTIlD5B/gqw==",
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-core-commonmark": "^2.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-normalize-identifier": "^2.0.0",
+        "micromark-util-sanitize-uri": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-strikethrough": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-strikethrough/-/micromark-extension-gfm-strikethrough-2.1.0.tgz",
+      "integrity": "sha512-ADVjpOOkjz1hhkZLlBiYA9cR2Anf8F4HqZUO6e5eDcPQd0Txw5fxLzzxnEkSkfnD0wziSGiv7sYhk/ktvbf1uw==",
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-util-chunked": "^2.0.0",
+        "micromark-util-classify-character": "^2.0.0",
+        "micromark-util-resolve-all": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-table": {
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-table/-/micromark-extension-gfm-table-2.1.1.tgz",
+      "integrity": "sha512-t2OU/dXXioARrC6yWfJ4hqB7rct14e8f7m0cbI5hUmDyyIlwv5vEtooptH8INkbLzOatzKuVbQmAYcbWoyz6Dg==",
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-tagfilter": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-tagfilter/-/micromark-extension-gfm-tagfilter-2.0.0.tgz",
+      "integrity": "sha512-xHlTOmuCSotIA8TW1mDIM6X2O1SiX5P9IuDtqGonFhEK0qgRI4yeC6vMxEV2dgyr2TiD+2PQ10o+cOhdVAcwfg==",
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-gfm-task-list-item": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-gfm-task-list-item/-/micromark-extension-gfm-task-list-item-2.1.0.tgz",
+      "integrity": "sha512-qIBZhqxqI6fjLDYFTBIa4eivDMnP+OZqsNwmQ3xNLE4Cxwc+zfQEfbs6tzAo2Hjq+bh6q5F+Z8/cksrLFYWQQw==",
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-mdx-expression": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-extension-mdx-expression/-/micromark-extension-mdx-expression-3.0.1.tgz",
+      "integrity": "sha512-dD/ADLJ1AeMvSAKBwO22zG22N4ybhe7kFIZ3LsDI0GlsNr2A3KYxb0LdC1u5rj4Nw+CHKY0RVdnHX8vj8ejm4Q==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-factory-mdx-expression": "^2.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-events-to-acorn": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-extension-mdx-jsx": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/micromark-extension-mdx-jsx/-/micromark-extension-mdx-jsx-3.0.2.tgz",
+      "integrity": "sha512-e5+q1DjMh62LZAJOnDraSSbDMvGJ8x3cbjygy2qFEi7HCeUT4BDKCvMozPozcD6WmOt6sVvYDNBKhFSz3kjOVQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-is-identifier-name": "^3.0.0",
+        "micromark-factory-mdx-expression": "^2.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-events-to-acorn": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-mdx-md": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-mdx-md/-/micromark-extension-mdx-md-2.0.0.tgz",
+      "integrity": "sha512-EpAiszsB3blw4Rpba7xTOUptcFeBFi+6PY8VnJ2hhimH+vCQDirWgsMpz7w1XcZE7LVrSAUGb9VJpG9ghlYvYQ==",
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-mdxjs": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-mdxjs/-/micromark-extension-mdxjs-3.0.0.tgz",
+      "integrity": "sha512-A873fJfhnJ2siZyUrJ31l34Uqwy4xIFmvPY1oj+Ean5PHcPBYzEsvqvWGaWcfEIr11O5Dlw3p2y0tZWpKHDejQ==",
+      "license": "MIT",
+      "dependencies": {
+        "acorn": "^8.0.0",
+        "acorn-jsx": "^5.0.0",
+        "micromark-extension-mdx-expression": "^3.0.0",
+        "micromark-extension-mdx-jsx": "^3.0.0",
+        "micromark-extension-mdx-md": "^2.0.0",
+        "micromark-extension-mdxjs-esm": "^3.0.0",
+        "micromark-util-combine-extensions": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-extension-mdxjs-esm": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/micromark-extension-mdxjs-esm/-/micromark-extension-mdxjs-esm-3.0.0.tgz",
+      "integrity": "sha512-DJFl4ZqkErRpq/dAPyeWp15tGrcrrJho1hKK5uBS70BCtfrIFg81sqcTVu3Ta+KD1Tk5vAtBNElWxtAa+m8K9A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-core-commonmark": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-events-to-acorn": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "unist-util-position-from-estree": "^2.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/micromark-factory-destination": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-factory-destination/-/micromark-factory-destination-2.0.1.tgz",
+      "integrity": "sha512-Xe6rDdJlkmbFRExpTOmRj9N3MaWmbAgdpSrBQvCFqhezUn4AHqJHbaEnfbVYYiexVSs//tqOdY/DxhjdCiJnIA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-factory-label": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-factory-label/-/micromark-factory-label-2.0.1.tgz",
+      "integrity": "sha512-VFMekyQExqIW7xIChcXn4ok29YE3rnuyveW3wZQWWqF4Nv9Wk5rgJ99KzPvHjkmPXF93FXIbBp6YdW3t71/7Vg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-factory-mdx-expression": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/micromark-factory-mdx-expression/-/micromark-factory-mdx-expression-2.0.3.tgz",
+      "integrity": "sha512-kQnEtA3vzucU2BkrIa8/VaSAsP+EJ3CKOvhMuJgOEGg9KDC6OAY6nSnNDVRiVNRqj7Y4SlSzcStaH/5jge8JdQ==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "devlop": "^1.0.0",
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-events-to-acorn": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "unist-util-position-from-estree": "^2.0.0",
+        "vfile-message": "^4.0.0"
+      }
+    },
+    "node_modules/micromark-factory-space": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-factory-space/-/micromark-factory-space-2.0.1.tgz",
+      "integrity": "sha512-zRkxjtBxxLd2Sc0d+fbnEunsTj46SWXgXciZmHq0kDYGnck/ZSGj9/wULTV95uoeYiK5hRXP2mJ98Uo4cq/LQg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-factory-title": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-factory-title/-/micromark-factory-title-2.0.1.tgz",
+      "integrity": "sha512-5bZ+3CjhAd9eChYTHsjy6TGxpOFSKgKKJPJxr293jTbfry2KDoWkhBb6TcPVB4NmzaPhMs1Frm9AZH7OD4Cjzw==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-factory-whitespace": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-factory-whitespace/-/micromark-factory-whitespace-2.0.1.tgz",
+      "integrity": "sha512-Ob0nuZ3PKt/n0hORHyvoD9uZhr+Za8sFoP+OnMcnWK5lngSzALgQYKMr9RJVOWLqQYuyn6ulqGWSXdwf6F80lQ==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-factory-space": "^2.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-character": {
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-character/-/micromark-util-character-2.1.1.tgz",
+      "integrity": "sha512-wv8tdUTJ3thSFFFJKtpYKOYiGP2+v96Hvk4Tu8KpCAsTMs6yi+nVmGh1syvSCsaxz45J6Jbw+9DD6g97+NV67Q==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-chunked": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-chunked/-/micromark-util-chunked-2.0.1.tgz",
+      "integrity": "sha512-QUNFEOPELfmvv+4xiNg2sRYeS/P84pTW0TCgP5zc9FpXetHY0ab7SxKyAQCNCc1eK0459uoLI1y5oO5Vc1dbhA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-symbol": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-classify-character": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-classify-character/-/micromark-util-classify-character-2.0.1.tgz",
+      "integrity": "sha512-K0kHzM6afW/MbeWYWLjoHQv1sgg2Q9EccHEDzSkxiP/EaagNzCm7T/WMKZ3rjMbvIpvBiZgwR3dKMygtA4mG1Q==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-combine-extensions": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-combine-extensions/-/micromark-util-combine-extensions-2.0.1.tgz",
+      "integrity": "sha512-OnAnH8Ujmy59JcyZw8JSbK9cGpdVY44NKgSM7E9Eh7DiLS2E9RNQf0dONaGDzEG9yjEl5hcqeIsj4hfRkLH/Bg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-chunked": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-decode-numeric-character-reference": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/micromark-util-decode-numeric-character-reference/-/micromark-util-decode-numeric-character-reference-2.0.2.tgz",
+      "integrity": "sha512-ccUbYk6CwVdkmCQMyr64dXz42EfHGkPQlBj5p7YVGzq8I7CtjXZJrubAYezf7Rp+bjPseiROqe7G6foFd+lEuw==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-symbol": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-decode-string": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-decode-string/-/micromark-util-decode-string-2.0.1.tgz",
+      "integrity": "sha512-nDV/77Fj6eH1ynwscYTOsbK7rR//Uj0bZXBwJZRfaLEJ1iGBR6kIfNmlNqaqJf649EP0F3NWNdeJi03elllNUQ==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "decode-named-character-reference": "^1.0.0",
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-decode-numeric-character-reference": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-encode": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-encode/-/micromark-util-encode-2.0.1.tgz",
+      "integrity": "sha512-c3cVx2y4KqUnwopcO9b/SCdo2O67LwJJ/UyqGfbigahfegL9myoEFoDYZgkT7f36T0bLrM9hZTAaAyH+PCAXjw==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/micromark-util-events-to-acorn": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/micromark-util-events-to-acorn/-/micromark-util-events-to-acorn-2.0.3.tgz",
+      "integrity": "sha512-jmsiEIiZ1n7X1Rr5k8wVExBQCg5jy4UXVADItHmNk1zkwEVhBuIUKRu3fqv+hs4nxLISi2DQGlqIOGiFxgbfHg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "@types/unist": "^3.0.0",
+        "devlop": "^1.0.0",
+        "estree-util-visit": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "vfile-message": "^4.0.0"
+      }
+    },
+    "node_modules/micromark-util-html-tag-name": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-html-tag-name/-/micromark-util-html-tag-name-2.0.1.tgz",
+      "integrity": "sha512-2cNEiYDhCWKI+Gs9T0Tiysk136SnR13hhO8yW6BGNyhOC4qYFnwF1nKfD3HFAIXA5c45RrIG1ub11GiXeYd1xA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/micromark-util-normalize-identifier": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-normalize-identifier/-/micromark-util-normalize-identifier-2.0.1.tgz",
+      "integrity": "sha512-sxPqmo70LyARJs0w2UclACPUUEqltCkJ6PhKdMIDuJ3gSf/Q+/GIe3WKl0Ijb/GyH9lOpUkRAO2wp0GVkLvS9Q==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-symbol": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-resolve-all": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-resolve-all/-/micromark-util-resolve-all-2.0.1.tgz",
+      "integrity": "sha512-VdQyxFWFT2/FGJgwQnJYbe1jjQoNTS4RjglmSjTUlpUMa95Htx9NHeYW4rGDJzbjvCsl9eLjMQwGeElsqmzcHg==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-sanitize-uri": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-sanitize-uri/-/micromark-util-sanitize-uri-2.0.1.tgz",
+      "integrity": "sha512-9N9IomZ/YuGGZZmQec1MbgxtlgougxTodVwDzzEouPKo3qFWvymFHWcnDi2vzV1ff6kas9ucW+o3yzJK9YB1AQ==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "micromark-util-character": "^2.0.0",
+        "micromark-util-encode": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-subtokenize": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/micromark-util-subtokenize/-/micromark-util-subtokenize-2.1.0.tgz",
+      "integrity": "sha512-XQLu552iSctvnEcgXw6+Sx75GflAPNED1qx7eBJ+wydBb2KCbRZe+NwvIEEMM83uml1+2WSXpBAcp9IUCgCYWA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "devlop": "^1.0.0",
+        "micromark-util-chunked": "^2.0.0",
+        "micromark-util-symbol": "^2.0.0",
+        "micromark-util-types": "^2.0.0"
+      }
+    },
+    "node_modules/micromark-util-symbol": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/micromark-util-symbol/-/micromark-util-symbol-2.0.1.tgz",
+      "integrity": "sha512-vs5t8Apaud9N28kgCrRUdEed4UJ+wWNvicHLPxCa9ENlYuAY31M0ETy5y1vA33YoNPDFTghEbnh6efaE8h4x0Q==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/micromark-util-types": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/micromark-util-types/-/micromark-util-types-2.0.2.tgz",
+      "integrity": "sha512-Yw0ECSpJoViF1qTU4DC6NwtC4aWGt1EkzaQB8KPPyCRR8z9TWeV0HbEFGTO+ZY1wB22zmxnJqhPyTpOVCpeHTA==",
+      "funding": [
+        {
+          "type": "GitHub Sponsors",
+          "url": "https://github.com/sponsors/unifiedjs"
+        },
+        {
+          "type": "OpenCollective",
+          "url": "https://opencollective.com/unified"
+        }
+      ],
+      "license": "MIT"
+    },
+    "node_modules/mrmime": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/mrmime/-/mrmime-2.0.1.tgz",
+      "integrity": "sha512-Y3wQdFg2Va6etvQ5I82yUhGdsKrcYox6p7FfL1LbK2J4V01F9TGlepTIhnK24t7koZibmg82KGglhA1XK5IsLQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=10"
+      }
+    },
+    "node_modules/ms": {
+      "version": "2.1.3",
+      "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.3.tgz",
+      "integrity": "sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==",
+      "license": "MIT"
+    },
+    "node_modules/nanoid": {
+      "version": "3.3.11",
+      "resolved": "https://registry.npmjs.org/nanoid/-/nanoid-3.3.11.tgz",
+      "integrity": "sha512-N8SpfPUnUp1bK+PMYW8qSWdl9U+wwNWI4QKxOYDy9JAro3WMX7p2OeVRF9v+347pnakNevPmiHhNmZ2HbFA76w==",
+      "funding": [
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/ai"
+        }
+      ],
+      "license": "MIT",
+      "bin": {
+        "nanoid": "bin/nanoid.cjs"
+      },
+      "engines": {
+        "node": "^10 || ^12 || ^13.7 || ^14 || >=15.0.1"
+      }
+    },
+    "node_modules/neotraverse": {
+      "version": "0.6.18",
+      "resolved": "https://registry.npmjs.org/neotraverse/-/neotraverse-0.6.18.tgz",
+      "integrity": "sha512-Z4SmBUweYa09+o6pG+eASabEpP6QkQ70yHj351pQoEXIs8uHbaU2DWVmzBANKgflPa47A50PtB2+NgRpQvr7vA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">= 10"
+      }
+    },
+    "node_modules/nlcst-to-string": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/nlcst-to-string/-/nlcst-to-string-4.0.0.tgz",
+      "integrity": "sha512-YKLBCcUYKAg0FNlOBT6aI91qFmSiFKiluk655WzPF+DDMA02qIyy8uiRqI8QXtcFpEvll12LpL5MXqEmAZ+dcA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/node-fetch": {
+      "version": "2.7.0",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.7.0.tgz",
+      "integrity": "sha512-c4FRfUm/dbcWZ7U+1Wq0AwCyFL+3nt2bEw05wfxSz+DWpWsitgmSgYmy2dQdWyKC1694ELPqMs/YzUSNozLt8A==",
+      "license": "MIT",
+      "dependencies": {
+        "whatwg-url": "^5.0.0"
+      },
+      "engines": {
+        "node": "4.x || >=6.0.0"
+      },
+      "peerDependencies": {
+        "encoding": "^0.1.0"
+      },
+      "peerDependenciesMeta": {
+        "encoding": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/node-fetch-native": {
+      "version": "1.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch-native/-/node-fetch-native-1.6.7.tgz",
+      "integrity": "sha512-g9yhqoedzIUm0nTnTqAQvueMPVOuIY16bqgAJJC8XOOubYFNwz6IER9qs0Gq2Xd0+CecCKFjtdDTMA4u4xG06Q==",
+      "license": "MIT"
+    },
+    "node_modules/node-mock-http": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/node-mock-http/-/node-mock-http-1.0.2.tgz",
+      "integrity": "sha512-zWaamgDUdo9SSLw47we78+zYw/bDr5gH8pH7oRRs8V3KmBtu8GLgGIbV2p/gRPd3LWpEOpjQj7X1FOU3VFMJ8g==",
+      "license": "MIT"
+    },
+    "node_modules/normalize-path": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/normalize-path/-/normalize-path-3.0.0.tgz",
+      "integrity": "sha512-6eZs5Ls3WtCisHWp9S2GUy8dqkpGi4BVSz3GaqiE6ezub0512ESztXUwUB6C6IKbQkY2Pnb/mD4WYojCRwcwLA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/nth-check": {
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/nth-check/-/nth-check-2.1.1.tgz",
+      "integrity": "sha512-lqjrjmaOoAnWfMmBPL+XNnynZh2+swxiX3WUE0s4yEHI6m+AwrK2UZOimIRl3X/4QctVqS8AiZjFqyOGrMXb/w==",
+      "license": "BSD-2-Clause",
+      "dependencies": {
+        "boolbase": "^1.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/fb55/nth-check?sponsor=1"
+      }
+    },
+    "node_modules/ofetch": {
+      "version": "1.4.1",
+      "resolved": "https://registry.npmjs.org/ofetch/-/ofetch-1.4.1.tgz",
+      "integrity": "sha512-QZj2DfGplQAr2oj9KzceK9Hwz6Whxazmn85yYeVuS3u9XTMOGMRx0kO95MQ+vLsj/S/NwBDMMLU5hpxvI6Tklw==",
+      "license": "MIT",
+      "dependencies": {
+        "destr": "^2.0.3",
+        "node-fetch-native": "^1.6.4",
+        "ufo": "^1.5.4"
+      }
+    },
+    "node_modules/ohash": {
+      "version": "2.0.11",
+      "resolved": "https://registry.npmjs.org/ohash/-/ohash-2.0.11.tgz",
+      "integrity": "sha512-RdR9FQrFwNBNXAr4GixM8YaRZRJ5PUWbKYbE5eOsrwAjJW0q2REGcf79oYPsLyskQCZG1PLN+S/K1V00joZAoQ==",
+      "license": "MIT"
+    },
+    "node_modules/oniguruma-parser": {
+      "version": "0.12.1",
+      "resolved": "https://registry.npmjs.org/oniguruma-parser/-/oniguruma-parser-0.12.1.tgz",
+      "integrity": "sha512-8Unqkvk1RYc6yq2WBYRj4hdnsAxVze8i7iPfQr8e4uSP3tRv0rpZcbGUDvxfQQcdwHt/e9PrMvGCsa8OqG9X3w==",
+      "license": "MIT"
+    },
+    "node_modules/oniguruma-to-es": {
+      "version": "4.3.3",
+      "resolved": "https://registry.npmjs.org/oniguruma-to-es/-/oniguruma-to-es-4.3.3.tgz",
+      "integrity": "sha512-rPiZhzC3wXwE59YQMRDodUwwT9FZ9nNBwQQfsd1wfdtlKEyCdRV0avrTcSZ5xlIvGRVPd/cx6ZN45ECmS39xvg==",
+      "license": "MIT",
+      "dependencies": {
+        "oniguruma-parser": "^0.12.1",
+        "regex": "^6.0.1",
+        "regex-recursion": "^6.0.2"
+      }
+    },
+    "node_modules/p-limit": {
+      "version": "6.2.0",
+      "resolved": "https://registry.npmjs.org/p-limit/-/p-limit-6.2.0.tgz",
+      "integrity": "sha512-kuUqqHNUqoIWp/c467RI4X6mmyuojY5jGutNU0wVTmEOOfcuwLqyMVoAi9MKi2Ak+5i9+nhmrK4ufZE8069kHA==",
+      "license": "MIT",
+      "dependencies": {
+        "yocto-queue": "^1.1.1"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/p-queue": {
+      "version": "8.1.0",
+      "resolved": "https://registry.npmjs.org/p-queue/-/p-queue-8.1.0.tgz",
+      "integrity": "sha512-mxLDbbGIBEXTJL0zEx8JIylaj3xQ7Z/7eEVjcF9fJX4DBiH9oqe+oahYnlKKxm0Ci9TlWTyhSHgygxMxjIB2jw==",
+      "license": "MIT",
+      "dependencies": {
+        "eventemitter3": "^5.0.1",
+        "p-timeout": "^6.1.2"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/p-timeout": {
+      "version": "6.1.4",
+      "resolved": "https://registry.npmjs.org/p-timeout/-/p-timeout-6.1.4.tgz",
+      "integrity": "sha512-MyIV3ZA/PmyBN/ud8vV9XzwTrNtR4jFrObymZYnZqMmW0zA8Z17vnT0rBgFE/TlohB+YCHqXMgZzb3Csp49vqg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=14.16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/package-manager-detector": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/package-manager-detector/-/package-manager-detector-1.3.0.tgz",
+      "integrity": "sha512-ZsEbbZORsyHuO00lY1kV3/t72yp6Ysay6Pd17ZAlNGuGwmWDLCJxFpRs0IzfXfj1o4icJOkUEioexFHzyPurSQ==",
+      "license": "MIT"
+    },
+    "node_modules/pagefind": {
+      "version": "1.3.0",
+      "resolved": "https://registry.npmjs.org/pagefind/-/pagefind-1.3.0.tgz",
+      "integrity": "sha512-8KPLGT5g9s+olKMRTU9LFekLizkVIu9tes90O1/aigJ0T5LmyPqTzGJrETnSw3meSYg58YH7JTzhTTW/3z6VAw==",
+      "license": "MIT",
+      "bin": {
+        "pagefind": "lib/runner/bin.cjs"
+      },
+      "optionalDependencies": {
+        "@pagefind/darwin-arm64": "1.3.0",
+        "@pagefind/darwin-x64": "1.3.0",
+        "@pagefind/linux-arm64": "1.3.0",
+        "@pagefind/linux-x64": "1.3.0",
+        "@pagefind/windows-x64": "1.3.0"
+      }
+    },
+    "node_modules/pako": {
+      "version": "0.2.9",
+      "resolved": "https://registry.npmjs.org/pako/-/pako-0.2.9.tgz",
+      "integrity": "sha512-NUcwaKxUxWrZLpDG+z/xZaCgQITkA/Dv4V/T6bw7VON6l1Xz/VnrBqrYjZQ12TamKHzITTfOEIYUj48y2KXImA==",
+      "license": "MIT"
+    },
+    "node_modules/parse-entities": {
+      "version": "4.0.2",
+      "resolved": "https://registry.npmjs.org/parse-entities/-/parse-entities-4.0.2.tgz",
+      "integrity": "sha512-GG2AQYWoLgL877gQIKeRPGO1xF9+eG1ujIb5soS5gPvLQ1y2o8FL90w2QWNdf9I361Mpp7726c+lj3U0qK1uGw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^2.0.0",
+        "character-entities-legacy": "^3.0.0",
+        "character-reference-invalid": "^2.0.0",
+        "decode-named-character-reference": "^1.0.0",
+        "is-alphanumerical": "^2.0.0",
+        "is-decimal": "^2.0.0",
+        "is-hexadecimal": "^2.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/parse-entities/node_modules/@types/unist": {
+      "version": "2.0.11",
+      "resolved": "https://registry.npmjs.org/@types/unist/-/unist-2.0.11.tgz",
+      "integrity": "sha512-CmBKiL6NNo/OqgmMn95Fk9Whlp2mtvIv+KNpQKN2F4SjvrEesubTRWGYSg+BnWZOnlCaSTU1sMpsBOzgbYhnsA==",
+      "license": "MIT"
+    },
+    "node_modules/parse-latin": {
+      "version": "7.0.0",
+      "resolved": "https://registry.npmjs.org/parse-latin/-/parse-latin-7.0.0.tgz",
+      "integrity": "sha512-mhHgobPPua5kZ98EF4HWiH167JWBfl4pvAIXXdbaVohtK7a6YBOy56kvhCqduqyo/f3yrHFWmqmiMg/BkBkYYQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0",
+        "@types/unist": "^3.0.0",
+        "nlcst-to-string": "^4.0.0",
+        "unist-util-modify-children": "^4.0.0",
+        "unist-util-visit-children": "^3.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/parse5": {
+      "version": "7.3.0",
+      "resolved": "https://registry.npmjs.org/parse5/-/parse5-7.3.0.tgz",
+      "integrity": "sha512-IInvU7fabl34qmi9gY8XOVxhYyMyuH2xUNpb2q8/Y+7552KlejkRvqvD19nMoUW/uQGGbqNpA6Tufu5FL5BZgw==",
+      "license": "MIT",
+      "dependencies": {
+        "entities": "^6.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/inikulin/parse5?sponsor=1"
+      }
+    },
+    "node_modules/picocolors": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/picocolors/-/picocolors-1.1.1.tgz",
+      "integrity": "sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==",
+      "license": "ISC"
+    },
+    "node_modules/picomatch": {
+      "version": "4.0.3",
+      "resolved": "https://registry.npmjs.org/picomatch/-/picomatch-4.0.3.tgz",
+      "integrity": "sha512-5gTmgEY/sqK6gFXLIsQNH19lWb4ebPDLA4SdLP7dsWkIXHWlG66oPuVvXSGFPppYZz8ZDZq0dYYrbHfBCVUb1Q==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/jonschlinkert"
+      }
+    },
+    "node_modules/postcss": {
+      "version": "8.5.6",
+      "resolved": "https://registry.npmjs.org/postcss/-/postcss-8.5.6.tgz",
+      "integrity": "sha512-3Ybi1tAuwAP9s0r1UQ2J4n5Y0G05bJkpUIO0/bI9MhwmD70S5aTWbXGBwxHrelT+XM1k6dM0pk+SwNkpTRN7Pg==",
+      "funding": [
+        {
+          "type": "opencollective",
+          "url": "https://opencollective.com/postcss/"
+        },
+        {
+          "type": "tidelift",
+          "url": "https://tidelift.com/funding/github/npm/postcss"
+        },
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/ai"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "nanoid": "^3.3.11",
+        "picocolors": "^1.1.1",
+        "source-map-js": "^1.2.1"
+      },
+      "engines": {
+        "node": "^10 || ^12 || >=14"
+      }
+    },
+    "node_modules/postcss-nested": {
+      "version": "6.2.0",
+      "resolved": "https://registry.npmjs.org/postcss-nested/-/postcss-nested-6.2.0.tgz",
+      "integrity": "sha512-HQbt28KulC5AJzG+cZtj9kvKB93CFCdLvog1WFLf1D+xmMvPGlBstkpTEZfK5+AN9hfJocyBFCNiqyS48bpgzQ==",
+      "funding": [
+        {
+          "type": "opencollective",
+          "url": "https://opencollective.com/postcss/"
+        },
+        {
+          "type": "github",
+          "url": "https://github.com/sponsors/ai"
+        }
+      ],
+      "license": "MIT",
+      "dependencies": {
+        "postcss-selector-parser": "^6.1.1"
+      },
+      "engines": {
+        "node": ">=12.0"
+      },
+      "peerDependencies": {
+        "postcss": "^8.2.14"
+      }
+    },
+    "node_modules/postcss-selector-parser": {
+      "version": "6.1.2",
+      "resolved": "https://registry.npmjs.org/postcss-selector-parser/-/postcss-selector-parser-6.1.2.tgz",
+      "integrity": "sha512-Q8qQfPiZ+THO/3ZrOrO0cJJKfpYCagtMUkXbnEfmgUjwXg6z/WBeOyS9APBBPCTSiDV+s4SwQGu8yFsiMRIudg==",
+      "license": "MIT",
+      "dependencies": {
+        "cssesc": "^3.0.0",
+        "util-deprecate": "^1.0.2"
+      },
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/prismjs": {
+      "version": "1.30.0",
+      "resolved": "https://registry.npmjs.org/prismjs/-/prismjs-1.30.0.tgz",
+      "integrity": "sha512-DEvV2ZF2r2/63V+tK8hQvrR2ZGn10srHbXviTlcv7Kpzw8jWiNTqbVgjO3IY8RxrrOUF8VPMQQFysYYYv0YZxw==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/prompts": {
+      "version": "2.4.2",
+      "resolved": "https://registry.npmjs.org/prompts/-/prompts-2.4.2.tgz",
+      "integrity": "sha512-NxNv/kLguCA7p3jE8oL2aEBsrJWgAakBpgmgK6lpPWV+WuOmY6r2/zbAVnP+T8bQlA0nzHXSJSJW0Hq7ylaD2Q==",
+      "license": "MIT",
+      "dependencies": {
+        "kleur": "^3.0.3",
+        "sisteransi": "^1.0.5"
+      },
+      "engines": {
+        "node": ">= 6"
+      }
+    },
+    "node_modules/prompts/node_modules/kleur": {
+      "version": "3.0.3",
+      "resolved": "https://registry.npmjs.org/kleur/-/kleur-3.0.3.tgz",
+      "integrity": "sha512-eTIzlVOSUR+JxdDFepEYcBMtZ9Qqdef+rnzWdRZuMbOywu5tO2w2N7rqjoANZ5k9vywhL6Br1VRjUIgTQx4E8w==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/property-information": {
+      "version": "7.1.0",
+      "resolved": "https://registry.npmjs.org/property-information/-/property-information-7.1.0.tgz",
+      "integrity": "sha512-TwEZ+X+yCJmYfL7TPUOcvBZ4QfoT5YenQiJuX//0th53DE6w0xxLEtfK3iyryQFddXuvkIk51EEgrJQ0WJkOmQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/radix3": {
+      "version": "1.1.2",
+      "resolved": "https://registry.npmjs.org/radix3/-/radix3-1.1.2.tgz",
+      "integrity": "sha512-b484I/7b8rDEdSDKckSSBA8knMpcdsXudlE/LNL639wFoHKwLbEkQFZHWEYwDC0wa0FKUcCY+GAF73Z7wxNVFA==",
+      "license": "MIT"
+    },
+    "node_modules/readdirp": {
+      "version": "4.1.2",
+      "resolved": "https://registry.npmjs.org/readdirp/-/readdirp-4.1.2.tgz",
+      "integrity": "sha512-GDhwkLfywWL2s6vEjyhri+eXmfH6j1L7JE27WhqLeYzoh/A3DBaYGEj2H/HFZCn/kMfim73FXxEJTw06WtxQwg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">= 14.18.0"
+      },
+      "funding": {
+        "type": "individual",
+        "url": "https://paulmillr.com/funding/"
+      }
+    },
+    "node_modules/recma-build-jsx": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/recma-build-jsx/-/recma-build-jsx-1.0.0.tgz",
+      "integrity": "sha512-8GtdyqaBcDfva+GUKDr3nev3VpKAhup1+RvkMvUxURHpW7QyIvk9F5wz7Vzo06CEMSilw6uArgRqhpiUcWp8ew==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "estree-util-build-jsx": "^3.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/recma-jsx": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/recma-jsx/-/recma-jsx-1.0.1.tgz",
+      "integrity": "sha512-huSIy7VU2Z5OLv6oFLosQGGDqPqdO1iq6bWNAdhzMxSJP7RAso4fCZ1cKu8j9YHCZf3TPrq4dw3okhrylgcd7w==",
+      "license": "MIT",
+      "dependencies": {
+        "acorn-jsx": "^5.0.0",
+        "estree-util-to-js": "^2.0.0",
+        "recma-parse": "^1.0.0",
+        "recma-stringify": "^1.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      },
+      "peerDependencies": {
+        "acorn": "^6.0.0 || ^7.0.0 || ^8.0.0"
+      }
+    },
+    "node_modules/recma-parse": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/recma-parse/-/recma-parse-1.0.0.tgz",
+      "integrity": "sha512-OYLsIGBB5Y5wjnSnQW6t3Xg7q3fQ7FWbw/vcXtORTnyaSFscOtABg+7Pnz6YZ6c27fG1/aN8CjfwoUEUIdwqWQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "esast-util-from-js": "^2.0.0",
+        "unified": "^11.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/recma-stringify": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/recma-stringify/-/recma-stringify-1.0.0.tgz",
+      "integrity": "sha512-cjwII1MdIIVloKvC9ErQ+OgAtwHBmcZ0Bg4ciz78FtbT8In39aAYbaA7zvxQ61xVMSPE8WxhLwLbhif4Js2C+g==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "estree-util-to-js": "^2.0.0",
+        "unified": "^11.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/regex": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/regex/-/regex-6.0.1.tgz",
+      "integrity": "sha512-uorlqlzAKjKQZ5P+kTJr3eeJGSVroLKoHmquUj4zHWuR+hEyNqlXsSKlYYF5F4NI6nl7tWCs0apKJ0lmfsXAPA==",
+      "license": "MIT",
+      "dependencies": {
+        "regex-utilities": "^2.3.0"
+      }
+    },
+    "node_modules/regex-recursion": {
+      "version": "6.0.2",
+      "resolved": "https://registry.npmjs.org/regex-recursion/-/regex-recursion-6.0.2.tgz",
+      "integrity": "sha512-0YCaSCq2VRIebiaUviZNs0cBz1kg5kVS2UKUfNIx8YVs1cN3AV7NTctO5FOKBA+UT2BPJIWZauYHPqJODG50cg==",
+      "license": "MIT",
+      "dependencies": {
+        "regex-utilities": "^2.3.0"
+      }
+    },
+    "node_modules/regex-utilities": {
+      "version": "2.3.0",
+      "resolved": "https://registry.npmjs.org/regex-utilities/-/regex-utilities-2.3.0.tgz",
+      "integrity": "sha512-8VhliFJAWRaUiVvREIiW2NXXTmHs4vMNnSzuJVhscgmGav3g9VDxLrQndI3dZZVVdp0ZO/5v0xmX516/7M9cng==",
+      "license": "MIT"
+    },
+    "node_modules/rehype": {
+      "version": "13.0.2",
+      "resolved": "https://registry.npmjs.org/rehype/-/rehype-13.0.2.tgz",
+      "integrity": "sha512-j31mdaRFrwFRUIlxGeuPXXKWQxet52RBQRvCmzl5eCefn/KGbomK5GMHNMsOJf55fgo3qw5tST5neDuarDYR2A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "rehype-parse": "^9.0.0",
+        "rehype-stringify": "^10.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rehype-expressive-code": {
+      "version": "0.41.3",
+      "resolved": "https://registry.npmjs.org/rehype-expressive-code/-/rehype-expressive-code-0.41.3.tgz",
+      "integrity": "sha512-8d9Py4c/V6I/Od2VIXFAdpiO2kc0SV2qTJsRAaqSIcM9aruW4ASLNe2kOEo1inXAAkIhpFzAHTc358HKbvpNUg==",
+      "license": "MIT",
+      "dependencies": {
+        "expressive-code": "^0.41.3"
+      }
+    },
+    "node_modules/rehype-format": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/rehype-format/-/rehype-format-5.0.1.tgz",
+      "integrity": "sha512-zvmVru9uB0josBVpr946OR8ui7nJEdzZobwLOOqHb/OOD88W0Vk2SqLwoVOj0fM6IPCCO6TaV9CvQvJMWwukFQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-format": "^1.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rehype-parse": {
+      "version": "9.0.1",
+      "resolved": "https://registry.npmjs.org/rehype-parse/-/rehype-parse-9.0.1.tgz",
+      "integrity": "sha512-ksCzCD0Fgfh7trPDxr2rSylbwq9iYDkSn8TCDmEJ49ljEUBxDVCzCHv7QNzZOfODanX4+bWQ4WZqLCRWYLfhag==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-from-html": "^2.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rehype-raw": {
+      "version": "7.0.0",
+      "resolved": "https://registry.npmjs.org/rehype-raw/-/rehype-raw-7.0.0.tgz",
+      "integrity": "sha512-/aE8hCfKlQeA8LmyeyQvQF3eBiLRGNlfBJEvWH7ivp9sBqs7TNqBL5X3v157rM4IFETqDnIOO+z5M/biZbo9Ww==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-raw": "^9.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rehype-recma": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/rehype-recma/-/rehype-recma-1.0.0.tgz",
+      "integrity": "sha512-lqA4rGUf1JmacCNWWZx0Wv1dHqMwxzsDWYMTowuplHF3xH0N/MmrZ/G3BDZnzAkRmxDadujCjaKM2hqYdCBOGw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "^1.0.0",
+        "@types/hast": "^3.0.0",
+        "hast-util-to-estree": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rehype-stringify": {
+      "version": "10.0.1",
+      "resolved": "https://registry.npmjs.org/rehype-stringify/-/rehype-stringify-10.0.1.tgz",
+      "integrity": "sha512-k9ecfXHmIPuFVI61B9DeLPN0qFHfawM6RsuX48hoqlaKSF61RskNjSm1lI8PhBEM0MRdLxVVm4WmTqJQccH9mA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "hast-util-to-html": "^9.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-directive": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/remark-directive/-/remark-directive-3.0.1.tgz",
+      "integrity": "sha512-gwglrEQEZcZYgVyG1tQuA+h58EZfq5CSULw7J90AFuCTyib1thgHPoqQ+h9iFvU6R+vnZ5oNFQR5QKgGpk741A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "mdast-util-directive": "^3.0.0",
+        "micromark-extension-directive": "^3.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-gfm": {
+      "version": "4.0.1",
+      "resolved": "https://registry.npmjs.org/remark-gfm/-/remark-gfm-4.0.1.tgz",
+      "integrity": "sha512-1quofZ2RQ9EWdeN34S79+KExV1764+wCUGop5CPL1WGdD0ocPpu91lzPGbwWMECpEpd42kJGQwzRfyov9j4yNg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "mdast-util-gfm": "^3.0.0",
+        "micromark-extension-gfm": "^3.0.0",
+        "remark-parse": "^11.0.0",
+        "remark-stringify": "^11.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-mdx": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/remark-mdx/-/remark-mdx-3.1.0.tgz",
+      "integrity": "sha512-Ngl/H3YXyBV9RcRNdlYsZujAmhsxwzxpDzpDEhFBVAGthS4GDgnctpDjgFl/ULx5UEDzqtW1cyBSNKqYYrqLBA==",
+      "license": "MIT",
+      "dependencies": {
+        "mdast-util-mdx": "^3.0.0",
+        "micromark-extension-mdxjs": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-parse": {
+      "version": "11.0.0",
+      "resolved": "https://registry.npmjs.org/remark-parse/-/remark-parse-11.0.0.tgz",
+      "integrity": "sha512-FCxlKLNGknS5ba/1lmpYijMUzX2esxW5xQqjWxw2eHFfS2MSdaHVINFmhjo+qN1WhZhNimq0dZATN9pH0IDrpA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "mdast-util-from-markdown": "^2.0.0",
+        "micromark-util-types": "^2.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-rehype": {
+      "version": "11.1.2",
+      "resolved": "https://registry.npmjs.org/remark-rehype/-/remark-rehype-11.1.2.tgz",
+      "integrity": "sha512-Dh7l57ianaEoIpzbp0PC9UKAdCSVklD8E5Rpw7ETfbTl3FqcOOgq5q2LVDhgGCkaBv7p24JXikPdvhhmHvKMsw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/hast": "^3.0.0",
+        "@types/mdast": "^4.0.0",
+        "mdast-util-to-hast": "^13.0.0",
+        "unified": "^11.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/remark-smartypants": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/remark-smartypants/-/remark-smartypants-3.0.2.tgz",
+      "integrity": "sha512-ILTWeOriIluwEvPjv67v7Blgrcx+LZOkAUVtKI3putuhlZm84FnqDORNXPPm+HY3NdZOMhyDwZ1E+eZB/Df5dA==",
+      "license": "MIT",
+      "dependencies": {
+        "retext": "^9.0.0",
+        "retext-smartypants": "^6.0.0",
+        "unified": "^11.0.4",
+        "unist-util-visit": "^5.0.0"
+      },
+      "engines": {
+        "node": ">=16.0.0"
+      }
+    },
+    "node_modules/remark-stringify": {
+      "version": "11.0.0",
+      "resolved": "https://registry.npmjs.org/remark-stringify/-/remark-stringify-11.0.0.tgz",
+      "integrity": "sha512-1OSmLd3awB/t8qdoEOMazZkNsfVTeY4fTsgzcQFdXNq8ToTN4ZGwrMnlda4K6smTFKD+GRV6O48i6Z4iKgPPpw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/mdast": "^4.0.0",
+        "mdast-util-to-markdown": "^2.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/restructure": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/restructure/-/restructure-3.0.2.tgz",
+      "integrity": "sha512-gSfoiOEA0VPE6Tukkrr7I0RBdE0s7H1eFCDBk05l1KIQT1UIKNc5JZy6jdyW6eYH3aR3g5b3PuL77rq0hvwtAw==",
+      "license": "MIT"
+    },
+    "node_modules/retext": {
+      "version": "9.0.0",
+      "resolved": "https://registry.npmjs.org/retext/-/retext-9.0.0.tgz",
+      "integrity": "sha512-sbMDcpHCNjvlheSgMfEcVrZko3cDzdbe1x/e7G66dFp0Ff7Mldvi2uv6JkJQzdRcvLYE8CA8Oe8siQx8ZOgTcA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0",
+        "retext-latin": "^4.0.0",
+        "retext-stringify": "^4.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/retext-latin": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/retext-latin/-/retext-latin-4.0.0.tgz",
+      "integrity": "sha512-hv9woG7Fy0M9IlRQloq/N6atV82NxLGveq+3H2WOi79dtIYWN8OaxogDm77f8YnVXJL2VD3bbqowu5E3EMhBYA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0",
+        "parse-latin": "^7.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/retext-smartypants": {
+      "version": "6.2.0",
+      "resolved": "https://registry.npmjs.org/retext-smartypants/-/retext-smartypants-6.2.0.tgz",
+      "integrity": "sha512-kk0jOU7+zGv//kfjXEBjdIryL1Acl4i9XNkHxtM7Tm5lFiCog576fjNC9hjoR7LTKQ0DsPWy09JummSsH1uqfQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0",
+        "nlcst-to-string": "^4.0.0",
+        "unist-util-visit": "^5.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/retext-stringify": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/retext-stringify/-/retext-stringify-4.0.0.tgz",
+      "integrity": "sha512-rtfN/0o8kL1e+78+uxPTqu1Klt0yPzKuQ2BfWwwfgIUSayyzxpM1PJzkKt4V8803uB9qSy32MvI7Xep9khTpiA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/nlcst": "^2.0.0",
+        "nlcst-to-string": "^4.0.0",
+        "unified": "^11.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/rollup": {
+      "version": "4.46.2",
+      "resolved": "https://registry.npmjs.org/rollup/-/rollup-4.46.2.tgz",
+      "integrity": "sha512-WMmLFI+Boh6xbop+OAGo9cQ3OgX9MIg7xOQjn+pTCwOkk+FNDAeAemXkJ3HzDJrVXleLOFVa1ipuc1AmEx1Dwg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/estree": "1.0.8"
+      },
+      "bin": {
+        "rollup": "dist/bin/rollup"
+      },
+      "engines": {
+        "node": ">=18.0.0",
+        "npm": ">=8.0.0"
+      },
+      "optionalDependencies": {
+        "@rollup/rollup-android-arm-eabi": "4.46.2",
+        "@rollup/rollup-android-arm64": "4.46.2",
+        "@rollup/rollup-darwin-arm64": "4.46.2",
+        "@rollup/rollup-darwin-x64": "4.46.2",
+        "@rollup/rollup-freebsd-arm64": "4.46.2",
+        "@rollup/rollup-freebsd-x64": "4.46.2",
+        "@rollup/rollup-linux-arm-gnueabihf": "4.46.2",
+        "@rollup/rollup-linux-arm-musleabihf": "4.46.2",
+        "@rollup/rollup-linux-arm64-gnu": "4.46.2",
+        "@rollup/rollup-linux-arm64-musl": "4.46.2",
+        "@rollup/rollup-linux-loongarch64-gnu": "4.46.2",
+        "@rollup/rollup-linux-ppc64-gnu": "4.46.2",
+        "@rollup/rollup-linux-riscv64-gnu": "4.46.2",
+        "@rollup/rollup-linux-riscv64-musl": "4.46.2",
+        "@rollup/rollup-linux-s390x-gnu": "4.46.2",
+        "@rollup/rollup-linux-x64-gnu": "4.46.2",
+        "@rollup/rollup-linux-x64-musl": "4.46.2",
+        "@rollup/rollup-win32-arm64-msvc": "4.46.2",
+        "@rollup/rollup-win32-ia32-msvc": "4.46.2",
+        "@rollup/rollup-win32-x64-msvc": "4.46.2",
+        "fsevents": "~2.3.2"
+      }
+    },
+    "node_modules/sax": {
+      "version": "1.4.1",
+      "resolved": "https://registry.npmjs.org/sax/-/sax-1.4.1.tgz",
+      "integrity": "sha512-+aWOz7yVScEGoKNd4PA10LZ8sk0A/z5+nXQG5giUO5rprX9jgYsTdov9qCchZiPIZezbZH+jRut8nPodFAX4Jg==",
+      "license": "ISC"
+    },
+    "node_modules/semver": {
+      "version": "7.7.2",
+      "resolved": "https://registry.npmjs.org/semver/-/semver-7.7.2.tgz",
+      "integrity": "sha512-RF0Fw+rO5AMf9MAyaRXI4AV0Ulj5lMHqVxxdSgiVbixSCXoEmmX/jk0CuJw4+3SqroYO9VoUh+HcuJivvtJemA==",
+      "license": "ISC",
+      "bin": {
+        "semver": "bin/semver.js"
+      },
+      "engines": {
+        "node": ">=10"
+      }
+    },
+    "node_modules/sharp": {
+      "version": "0.34.3",
+      "resolved": "https://registry.npmjs.org/sharp/-/sharp-0.34.3.tgz",
+      "integrity": "sha512-eX2IQ6nFohW4DbvHIOLRB3MHFpYqaqvXd3Tp5e/T/dSH83fxaNJQRvDMhASmkNTsNTVF2/OOopzRCt7xokgPfg==",
+      "hasInstallScript": true,
+      "license": "Apache-2.0",
+      "dependencies": {
+        "color": "^4.2.3",
+        "detect-libc": "^2.0.4",
+        "semver": "^7.7.2"
+      },
+      "engines": {
+        "node": "^18.17.0 || ^20.3.0 || >=21.0.0"
+      },
+      "funding": {
+        "url": "https://opencollective.com/libvips"
+      },
+      "optionalDependencies": {
+        "@img/sharp-darwin-arm64": "0.34.3",
+        "@img/sharp-darwin-x64": "0.34.3",
+        "@img/sharp-libvips-darwin-arm64": "1.2.0",
+        "@img/sharp-libvips-darwin-x64": "1.2.0",
+        "@img/sharp-libvips-linux-arm": "1.2.0",
+        "@img/sharp-libvips-linux-arm64": "1.2.0",
+        "@img/sharp-libvips-linux-ppc64": "1.2.0",
+        "@img/sharp-libvips-linux-s390x": "1.2.0",
+        "@img/sharp-libvips-linux-x64": "1.2.0",
+        "@img/sharp-libvips-linuxmusl-arm64": "1.2.0",
+        "@img/sharp-libvips-linuxmusl-x64": "1.2.0",
+        "@img/sharp-linux-arm": "0.34.3",
+        "@img/sharp-linux-arm64": "0.34.3",
+        "@img/sharp-linux-ppc64": "0.34.3",
+        "@img/sharp-linux-s390x": "0.34.3",
+        "@img/sharp-linux-x64": "0.34.3",
+        "@img/sharp-linuxmusl-arm64": "0.34.3",
+        "@img/sharp-linuxmusl-x64": "0.34.3",
+        "@img/sharp-wasm32": "0.34.3",
+        "@img/sharp-win32-arm64": "0.34.3",
+        "@img/sharp-win32-ia32": "0.34.3",
+        "@img/sharp-win32-x64": "0.34.3"
+      }
+    },
+    "node_modules/shiki": {
+      "version": "3.9.2",
+      "resolved": "https://registry.npmjs.org/shiki/-/shiki-3.9.2.tgz",
+      "integrity": "sha512-t6NKl5e/zGTvw/IyftLcumolgOczhuroqwXngDeMqJ3h3EQiTY/7wmfgPlsmloD8oYfqkEDqxiaH37Pjm1zUhQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@shikijs/core": "3.9.2",
+        "@shikijs/engine-javascript": "3.9.2",
+        "@shikijs/engine-oniguruma": "3.9.2",
+        "@shikijs/langs": "3.9.2",
+        "@shikijs/themes": "3.9.2",
+        "@shikijs/types": "3.9.2",
+        "@shikijs/vscode-textmate": "^10.0.2",
+        "@types/hast": "^3.0.4"
+      }
+    },
+    "node_modules/simple-swizzle": {
+      "version": "0.2.2",
+      "resolved": "https://registry.npmjs.org/simple-swizzle/-/simple-swizzle-0.2.2.tgz",
+      "integrity": "sha512-JA//kQgZtbuY83m+xT+tXJkmJncGMTFT+C+g2h2R9uxkYIrE2yy9sgmcLhCnw57/WSD+Eh3J97FPEDFnbXnDUg==",
+      "license": "MIT",
+      "dependencies": {
+        "is-arrayish": "^0.3.1"
+      }
+    },
+    "node_modules/sisteransi": {
+      "version": "1.0.5",
+      "resolved": "https://registry.npmjs.org/sisteransi/-/sisteransi-1.0.5.tgz",
+      "integrity": "sha512-bLGGlR1QxBcynn2d5YmDX4MGjlZvy2MRBDRNHLJ8VI6l6+9FUiyTFNJ0IveOSP0bcXgVDPRcfGqA0pjaqUpfVg==",
+      "license": "MIT"
+    },
+    "node_modules/sitemap": {
+      "version": "8.0.0",
+      "resolved": "https://registry.npmjs.org/sitemap/-/sitemap-8.0.0.tgz",
+      "integrity": "sha512-+AbdxhM9kJsHtruUF39bwS/B0Fytw6Fr1o4ZAIAEqA6cke2xcoO2GleBw9Zw7nRzILVEgz7zBM5GiTJjie1G9A==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/node": "^17.0.5",
+        "@types/sax": "^1.2.1",
+        "arg": "^5.0.0",
+        "sax": "^1.2.4"
+      },
+      "bin": {
+        "sitemap": "dist/cli.js"
+      },
+      "engines": {
+        "node": ">=14.0.0",
+        "npm": ">=6.0.0"
+      }
+    },
+    "node_modules/sitemap/node_modules/@types/node": {
+      "version": "17.0.45",
+      "resolved": "https://registry.npmjs.org/@types/node/-/node-17.0.45.tgz",
+      "integrity": "sha512-w+tIMs3rq2afQdsPJlODhoUEKzFP1ayaoyl1CcnwtIlsVe7K7bA1NGm4s3PraqTLlXnbIN84zuBlxBWo1u9BLw==",
+      "license": "MIT"
+    },
+    "node_modules/smol-toml": {
+      "version": "1.4.2",
+      "resolved": "https://registry.npmjs.org/smol-toml/-/smol-toml-1.4.2.tgz",
+      "integrity": "sha512-rInDH6lCNiEyn3+hH8KVGFdbjc099j47+OSgbMrfDYX1CmXLfdKd7qi6IfcWj2wFxvSVkuI46M+wPGYfEOEj6g==",
+      "license": "BSD-3-Clause",
+      "engines": {
+        "node": ">= 18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/cyyynthia"
+      }
+    },
+    "node_modules/source-map": {
+      "version": "0.7.6",
+      "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.7.6.tgz",
+      "integrity": "sha512-i5uvt8C3ikiWeNZSVZNWcfZPItFQOsYTUAOkcUPGd8DqDy1uOUikjt5dG+uRlwyvR108Fb9DOd4GvXfT0N2/uQ==",
+      "license": "BSD-3-Clause",
+      "engines": {
+        "node": ">= 12"
+      }
+    },
+    "node_modules/source-map-js": {
+      "version": "1.2.1",
+      "resolved": "https://registry.npmjs.org/source-map-js/-/source-map-js-1.2.1.tgz",
+      "integrity": "sha512-UXWMKhLOwVKb728IUtQPXxfYU+usdybtUrK/8uGE8CQMvrhOpwvzDBwj0QhSL7MQc7vIsISBG8VQ8+IDQxpfQA==",
+      "license": "BSD-3-Clause",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/space-separated-tokens": {
+      "version": "2.0.2",
+      "resolved": "https://registry.npmjs.org/space-separated-tokens/-/space-separated-tokens-2.0.2.tgz",
+      "integrity": "sha512-PEGlAwrG8yXGXRjW32fGbg66JAlOAwbObuqVoJpv/mRgoWDQfgH1wDPvtzWyUSNAXBGSk8h755YDbbcEy3SH2Q==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/stream-replace-string": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/stream-replace-string/-/stream-replace-string-2.0.0.tgz",
+      "integrity": "sha512-TlnjJ1C0QrmxRNrON00JvaFFlNh5TTG00APw23j74ET7gkQpTASi6/L2fuiav8pzK715HXtUeClpBTw2NPSn6w==",
+      "license": "MIT"
+    },
+    "node_modules/string-width": {
+      "version": "7.2.0",
+      "resolved": "https://registry.npmjs.org/string-width/-/string-width-7.2.0.tgz",
+      "integrity": "sha512-tsaTIkKW9b4N+AEj+SVA+WhJzV7/zMhcSu78mLKWSk7cXMOSHsBKFWUs0fWwq8QyK3MgJBQRX6Gbi4kYbdvGkQ==",
+      "license": "MIT",
+      "dependencies": {
+        "emoji-regex": "^10.3.0",
+        "get-east-asian-width": "^1.0.0",
+        "strip-ansi": "^7.1.0"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/stringify-entities": {
+      "version": "4.0.4",
+      "resolved": "https://registry.npmjs.org/stringify-entities/-/stringify-entities-4.0.4.tgz",
+      "integrity": "sha512-IwfBptatlO+QCJUo19AqvrPNqlVMpW9YEL2LIVY+Rpv2qsjCGxaDLNRgeGsQWJhfItebuJhsGSLjaBbNSQ+ieg==",
+      "license": "MIT",
+      "dependencies": {
+        "character-entities-html4": "^2.0.0",
+        "character-entities-legacy": "^3.0.0"
+      },
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/strip-ansi": {
+      "version": "7.1.0",
+      "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-7.1.0.tgz",
+      "integrity": "sha512-iq6eVVI64nQQTRYq2KtEg2d2uU7LElhTJwsH4YzIHZshxlgZms/wIc4VoDQTlG/IvVIrBKG06CrZnp0qv7hkcQ==",
+      "license": "MIT",
+      "dependencies": {
+        "ansi-regex": "^6.0.1"
+      },
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/chalk/strip-ansi?sponsor=1"
+      }
+    },
+    "node_modules/style-to-js": {
+      "version": "1.1.17",
+      "resolved": "https://registry.npmjs.org/style-to-js/-/style-to-js-1.1.17.tgz",
+      "integrity": "sha512-xQcBGDxJb6jjFCTzvQtfiPn6YvvP2O8U1MDIPNfJQlWMYfktPy+iGsHE7cssjs7y84d9fQaK4UF3RIJaAHSoYA==",
+      "license": "MIT",
+      "dependencies": {
+        "style-to-object": "1.0.9"
+      }
+    },
+    "node_modules/style-to-object": {
+      "version": "1.0.9",
+      "resolved": "https://registry.npmjs.org/style-to-object/-/style-to-object-1.0.9.tgz",
+      "integrity": "sha512-G4qppLgKu/k6FwRpHiGiKPaPTFcG3g4wNVX/Qsfu+RqQM30E7Tyu/TEgxcL9PNLF5pdRLwQdE3YKKf+KF2Dzlw==",
+      "license": "MIT",
+      "dependencies": {
+        "inline-style-parser": "0.2.4"
+      }
+    },
+    "node_modules/tiny-inflate": {
+      "version": "1.0.3",
+      "resolved": "https://registry.npmjs.org/tiny-inflate/-/tiny-inflate-1.0.3.tgz",
+      "integrity": "sha512-pkY1fj1cKHb2seWDy0B16HeWyczlJA9/WW3u3c4z/NiWDsO3DOU5D7nhTLE9CF0yXv/QZFY7sEJmj24dK+Rrqw==",
+      "license": "MIT"
+    },
+    "node_modules/tinyexec": {
+      "version": "0.3.2",
+      "resolved": "https://registry.npmjs.org/tinyexec/-/tinyexec-0.3.2.tgz",
+      "integrity": "sha512-KQQR9yN7R5+OSwaK0XQoj22pwHoTlgYqmUscPYoknOoWCWfj/5/ABTMRi69FrKU5ffPVh5QcFikpWJI/P1ocHA==",
+      "license": "MIT"
+    },
+    "node_modules/tinyglobby": {
+      "version": "0.2.14",
+      "resolved": "https://registry.npmjs.org/tinyglobby/-/tinyglobby-0.2.14.tgz",
+      "integrity": "sha512-tX5e7OM1HnYr2+a2C/4V0htOcSQcoSTH9KgJnVvNm5zm/cyEWKJ7j7YutsH9CxMdtOkkLFy2AHrMci9IM8IPZQ==",
+      "license": "MIT",
+      "dependencies": {
+        "fdir": "^6.4.4",
+        "picomatch": "^4.0.2"
+      },
+      "engines": {
+        "node": ">=12.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/SuperchupuDev"
+      }
+    },
+    "node_modules/tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha512-N3WMsuqV66lT30CrXNbEjx4GEwlow3v6rr4mCcv6prnfwhS01rkgyFdjPNBYd9br7LpXV1+Emh01fHnq2Gdgrw==",
+      "license": "MIT"
+    },
+    "node_modules/trim-lines": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/trim-lines/-/trim-lines-3.0.1.tgz",
+      "integrity": "sha512-kRj8B+YHZCc9kQYdWfJB2/oUl9rA99qbowYYBtr4ui4mZyAQ2JpvVBd/6U2YloATfqBhBTSMhTpgBHtU0Mf3Rg==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/trough": {
+      "version": "2.2.0",
+      "resolved": "https://registry.npmjs.org/trough/-/trough-2.2.0.tgz",
+      "integrity": "sha512-tmMpK00BjZiUyVyvrBK7knerNgmgvcV/KLVyuma/SC+TQN167GrMRciANTz09+k3zW8L8t60jWO1GpfkZdjTaw==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/tsconfck": {
+      "version": "3.1.6",
+      "resolved": "https://registry.npmjs.org/tsconfck/-/tsconfck-3.1.6.tgz",
+      "integrity": "sha512-ks6Vjr/jEw0P1gmOVwutM3B7fWxoWBL2KRDb1JfqGVawBmO5UsvmWOQFGHBPl5yxYz4eERr19E6L7NMv+Fej4w==",
+      "license": "MIT",
+      "bin": {
+        "tsconfck": "bin/tsconfck.js"
+      },
+      "engines": {
+        "node": "^18 || >=20"
+      },
+      "peerDependencies": {
+        "typescript": "^5.0.0"
+      },
+      "peerDependenciesMeta": {
+        "typescript": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/tslib": {
+      "version": "2.8.1",
+      "resolved": "https://registry.npmjs.org/tslib/-/tslib-2.8.1.tgz",
+      "integrity": "sha512-oJFu94HQb+KVduSUQL7wnpmqnfmLsOA/nAh6b6EH0wCEoK0/mPeXU6c3wKDV83MkOuHPRHtSXKKU99IBazS/2w==",
+      "license": "0BSD"
+    },
+    "node_modules/type-fest": {
+      "version": "4.41.0",
+      "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-4.41.0.tgz",
+      "integrity": "sha512-TeTSQ6H5YHvpqVwBRcnLDCBnDOHWYu7IvGbHT6N8AOymcr9PJGjc1GTtiWZTYg0NCgYwvnYWEkVChQAr9bjfwA==",
+      "license": "(MIT OR CC0-1.0)",
+      "engines": {
+        "node": ">=16"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/typescript": {
+      "version": "5.9.2",
+      "resolved": "https://registry.npmjs.org/typescript/-/typescript-5.9.2.tgz",
+      "integrity": "sha512-CWBzXQrc/qOkhidw1OzBTQuYRbfyxDXJMVJ1XNwUHGROVmuaeiEm3OslpZ1RV96d7SKKjZKrSJu3+t/xlw3R9A==",
+      "license": "Apache-2.0",
+      "peer": true,
+      "bin": {
+        "tsc": "bin/tsc",
+        "tsserver": "bin/tsserver"
+      },
+      "engines": {
+        "node": ">=14.17"
+      }
+    },
+    "node_modules/ufo": {
+      "version": "1.6.1",
+      "resolved": "https://registry.npmjs.org/ufo/-/ufo-1.6.1.tgz",
+      "integrity": "sha512-9a4/uxlTWJ4+a5i0ooc1rU7C7YOw3wT+UGqdeNNHWnOF9qcMBgLRS+4IYUqbczewFx4mLEig6gawh7X6mFlEkA==",
+      "license": "MIT"
+    },
+    "node_modules/ultrahtml": {
+      "version": "1.6.0",
+      "resolved": "https://registry.npmjs.org/ultrahtml/-/ultrahtml-1.6.0.tgz",
+      "integrity": "sha512-R9fBn90VTJrqqLDwyMph+HGne8eqY1iPfYhPzZrvKpIfwkWZbcYlfpsb8B9dTvBfpy1/hqAD7Wi8EKfP9e8zdw==",
+      "license": "MIT"
+    },
+    "node_modules/uncrypto": {
+      "version": "0.1.3",
+      "resolved": "https://registry.npmjs.org/uncrypto/-/uncrypto-0.1.3.tgz",
+      "integrity": "sha512-Ql87qFHB3s/De2ClA9e0gsnS6zXG27SkTiSJwjCc9MebbfapQfuPzumMIUMi38ezPZVNFcHI9sUIepeQfw8J8Q==",
+      "license": "MIT"
+    },
+    "node_modules/undici-types": {
+      "version": "7.10.0",
+      "resolved": "https://registry.npmjs.org/undici-types/-/undici-types-7.10.0.tgz",
+      "integrity": "sha512-t5Fy/nfn+14LuOc2KNYg75vZqClpAiqscVvMygNnlsHBFpSXdJaYtXMcdNLpl/Qvc3P2cB3s6lOV51nqsFq4ag==",
+      "license": "MIT"
+    },
+    "node_modules/unicode-properties": {
+      "version": "1.4.1",
+      "resolved": "https://registry.npmjs.org/unicode-properties/-/unicode-properties-1.4.1.tgz",
+      "integrity": "sha512-CLjCCLQ6UuMxWnbIylkisbRj31qxHPAurvena/0iwSVbQ2G1VY5/HjV0IRabOEbDHlzZlRdCrD4NhB0JtU40Pg==",
+      "license": "MIT",
+      "dependencies": {
+        "base64-js": "^1.3.0",
+        "unicode-trie": "^2.0.0"
+      }
+    },
+    "node_modules/unicode-trie": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/unicode-trie/-/unicode-trie-2.0.0.tgz",
+      "integrity": "sha512-x7bc76x0bm4prf1VLg79uhAzKw8DVboClSN5VxJuQ+LKDOVEW9CdH+VY7SP+vX7xCYQqzzgQpFqz15zeLvAtZQ==",
+      "license": "MIT",
+      "dependencies": {
+        "pako": "^0.2.5",
+        "tiny-inflate": "^1.0.0"
+      }
+    },
+    "node_modules/unified": {
+      "version": "11.0.5",
+      "resolved": "https://registry.npmjs.org/unified/-/unified-11.0.5.tgz",
+      "integrity": "sha512-xKvGhPWw3k84Qjh8bI3ZeJjqnyadK+GEFtazSfZv/rKeTkTjOJho6mFqh2SM96iIcZokxiOpg78GazTSg8+KHA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "bail": "^2.0.0",
+        "devlop": "^1.0.0",
+        "extend": "^3.0.0",
+        "is-plain-obj": "^4.0.0",
+        "trough": "^2.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unifont": {
+      "version": "0.5.2",
+      "resolved": "https://registry.npmjs.org/unifont/-/unifont-0.5.2.tgz",
+      "integrity": "sha512-LzR4WUqzH9ILFvjLAUU7dK3Lnou/qd5kD+IakBtBK4S15/+x2y9VX+DcWQv6s551R6W+vzwgVS6tFg3XggGBgg==",
+      "license": "MIT",
+      "dependencies": {
+        "css-tree": "^3.0.0",
+        "ofetch": "^1.4.1",
+        "ohash": "^2.0.0"
+      }
+    },
+    "node_modules/unist-util-find-after": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-find-after/-/unist-util-find-after-5.0.0.tgz",
+      "integrity": "sha512-amQa0Ep2m6hE2g72AugUItjbuM8X8cGQnFoHk0pGfrFeT9GZhzN5SW8nRsiGKK7Aif4CrACPENkA6P/Lw6fHGQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "unist-util-is": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-is": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-is/-/unist-util-is-6.0.0.tgz",
+      "integrity": "sha512-2qCTHimwdxLfz+YzdGfkqNlH0tLi9xjTnHddPmJwtIG9MGsdbutfTc4P+haPD7l7Cjxf/WZj+we5qfVPvvxfYw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-modify-children": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-modify-children/-/unist-util-modify-children-4.0.0.tgz",
+      "integrity": "sha512-+tdN5fGNddvsQdIzUF3Xx82CU9sMM+fA0dLgR9vOmT0oPT2jH+P1nd5lSqfCfXAw+93NhcXNY2qqvTUtE4cQkw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "array-iterate": "^2.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-position": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-position/-/unist-util-position-5.0.0.tgz",
+      "integrity": "sha512-fucsC7HjXvkB5R3kTCO7kUjRdrS0BJt3M/FPxmHMBOm8JQi2BsHAHFsy27E0EolP8rp0NzXsJ+jNPyDWvOJZPA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-position-from-estree": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-position-from-estree/-/unist-util-position-from-estree-2.0.0.tgz",
+      "integrity": "sha512-KaFVRjoqLyF6YXCbVLNad/eS4+OfPQQn2yOd7zF/h5T/CSL2v8NpN6a5TPvtbXthAGw5nG+PuTtq+DdIZr+cRQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-remove-position": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-remove-position/-/unist-util-remove-position-5.0.0.tgz",
+      "integrity": "sha512-Hp5Kh3wLxv0PHj9m2yZhhLt58KzPtEYKQQ4yxfYFEO7EvHwzyDYnduhHnY1mDxoqr7VUwVuHXk9RXKIiYS1N8Q==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "unist-util-visit": "^5.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-stringify-position": {
+      "version": "4.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-stringify-position/-/unist-util-stringify-position-4.0.0.tgz",
+      "integrity": "sha512-0ASV06AAoKCDkS2+xw5RXJywruurpbC4JZSm7nr7MOt1ojAzvyyaO+UxZf18j8FCF6kmzCZKcAgN/yu2gm2XgQ==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-visit": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-visit/-/unist-util-visit-5.0.0.tgz",
+      "integrity": "sha512-MR04uvD+07cwl/yhVuVWAtw+3GOR/knlL55Nd/wAdblk27GCVt3lqpTivy/tkJcZoNPzTwS1Y+KMojlLDhoTzg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "unist-util-is": "^6.0.0",
+        "unist-util-visit-parents": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-visit-children": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/unist-util-visit-children/-/unist-util-visit-children-3.0.0.tgz",
+      "integrity": "sha512-RgmdTfSBOg04sdPcpTSD1jzoNBjt9a80/ZCzp5cI9n1qPzLZWF9YdvWGN2zmTumP1HWhXKdUWexjy/Wy/lJ7tA==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unist-util-visit-parents": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/unist-util-visit-parents/-/unist-util-visit-parents-6.0.1.tgz",
+      "integrity": "sha512-L/PqWzfTP9lzzEa6CKs0k2nARxTdZduw3zyh8d2NVBnsyvHjSX4TWse388YrrQKbvI8w20fGjGlhgT96WwKykw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "unist-util-is": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/unstorage": {
+      "version": "1.16.1",
+      "resolved": "https://registry.npmjs.org/unstorage/-/unstorage-1.16.1.tgz",
+      "integrity": "sha512-gdpZ3guLDhz+zWIlYP1UwQ259tG5T5vYRzDaHMkQ1bBY1SQPutvZnrRjTFaWUUpseErJIgAZS51h6NOcZVZiqQ==",
+      "license": "MIT",
+      "dependencies": {
+        "anymatch": "^3.1.3",
+        "chokidar": "^4.0.3",
+        "destr": "^2.0.5",
+        "h3": "^1.15.3",
+        "lru-cache": "^10.4.3",
+        "node-fetch-native": "^1.6.6",
+        "ofetch": "^1.4.1",
+        "ufo": "^1.6.1"
+      },
+      "peerDependencies": {
+        "@azure/app-configuration": "^1.8.0",
+        "@azure/cosmos": "^4.2.0",
+        "@azure/data-tables": "^13.3.0",
+        "@azure/identity": "^4.6.0",
+        "@azure/keyvault-secrets": "^4.9.0",
+        "@azure/storage-blob": "^12.26.0",
+        "@capacitor/preferences": "^6.0.3 || ^7.0.0",
+        "@deno/kv": ">=0.9.0",
+        "@netlify/blobs": "^6.5.0 || ^7.0.0 || ^8.1.0 || ^9.0.0 || ^10.0.0",
+        "@planetscale/database": "^1.19.0",
+        "@upstash/redis": "^1.34.3",
+        "@vercel/blob": ">=0.27.1",
+        "@vercel/kv": "^1.0.1",
+        "aws4fetch": "^1.0.20",
+        "db0": ">=0.2.1",
+        "idb-keyval": "^6.2.1",
+        "ioredis": "^5.4.2",
+        "uploadthing": "^7.4.4"
+      },
+      "peerDependenciesMeta": {
+        "@azure/app-configuration": {
+          "optional": true
+        },
+        "@azure/cosmos": {
+          "optional": true
+        },
+        "@azure/data-tables": {
+          "optional": true
+        },
+        "@azure/identity": {
+          "optional": true
+        },
+        "@azure/keyvault-secrets": {
+          "optional": true
+        },
+        "@azure/storage-blob": {
+          "optional": true
+        },
+        "@capacitor/preferences": {
+          "optional": true
+        },
+        "@deno/kv": {
+          "optional": true
+        },
+        "@netlify/blobs": {
+          "optional": true
+        },
+        "@planetscale/database": {
+          "optional": true
+        },
+        "@upstash/redis": {
+          "optional": true
+        },
+        "@vercel/blob": {
+          "optional": true
+        },
+        "@vercel/kv": {
+          "optional": true
+        },
+        "aws4fetch": {
+          "optional": true
+        },
+        "db0": {
+          "optional": true
+        },
+        "idb-keyval": {
+          "optional": true
+        },
+        "ioredis": {
+          "optional": true
+        },
+        "uploadthing": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/util-deprecate": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz",
+      "integrity": "sha512-EPD5q1uXyFxJpCrLnCc1nHnq3gOa6DZBocAIiI2TaSCA7VCJ1UJDMagCzIkXNsUYfD1daK//LTEQ8xiIbrHtcw==",
+      "license": "MIT"
+    },
+    "node_modules/vfile": {
+      "version": "6.0.3",
+      "resolved": "https://registry.npmjs.org/vfile/-/vfile-6.0.3.tgz",
+      "integrity": "sha512-KzIbH/9tXat2u30jf+smMwFCsno4wHVdNmzFyL+T/L3UGqqk6JKfVqOFOZEpZSHADH1k40ab6NUIXZq422ov3Q==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "vfile-message": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/vfile-location": {
+      "version": "5.0.3",
+      "resolved": "https://registry.npmjs.org/vfile-location/-/vfile-location-5.0.3.tgz",
+      "integrity": "sha512-5yXvWDEgqeiYiBe1lbxYF7UMAIm/IcopxMHrMQDq3nvKcjPKIhZklUKL+AE7J7uApI4kwe2snsK+eI6UTj9EHg==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "vfile": "^6.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/vfile-message": {
+      "version": "4.0.3",
+      "resolved": "https://registry.npmjs.org/vfile-message/-/vfile-message-4.0.3.tgz",
+      "integrity": "sha512-QTHzsGd1EhbZs4AsQ20JX1rC3cOlt/IWJruk893DfLRr57lcnOeMaWG4K0JrRta4mIJZKth2Au3mM3u03/JWKw==",
+      "license": "MIT",
+      "dependencies": {
+        "@types/unist": "^3.0.0",
+        "unist-util-stringify-position": "^4.0.0"
+      },
+      "funding": {
+        "type": "opencollective",
+        "url": "https://opencollective.com/unified"
+      }
+    },
+    "node_modules/vite": {
+      "version": "6.3.5",
+      "resolved": "https://registry.npmjs.org/vite/-/vite-6.3.5.tgz",
+      "integrity": "sha512-cZn6NDFE7wdTpINgs++ZJ4N49W2vRp8LCKrn3Ob1kYNtOo21vfDoaV5GzBfLU4MovSAB8uNRm4jgzVQZ+mBzPQ==",
+      "license": "MIT",
+      "dependencies": {
+        "esbuild": "^0.25.0",
+        "fdir": "^6.4.4",
+        "picomatch": "^4.0.2",
+        "postcss": "^8.5.3",
+        "rollup": "^4.34.9",
+        "tinyglobby": "^0.2.13"
+      },
+      "bin": {
+        "vite": "bin/vite.js"
+      },
+      "engines": {
+        "node": "^18.0.0 || ^20.0.0 || >=22.0.0"
+      },
+      "funding": {
+        "url": "https://github.com/vitejs/vite?sponsor=1"
+      },
+      "optionalDependencies": {
+        "fsevents": "~2.3.3"
+      },
+      "peerDependencies": {
+        "@types/node": "^18.0.0 || ^20.0.0 || >=22.0.0",
+        "jiti": ">=1.21.0",
+        "less": "*",
+        "lightningcss": "^1.21.0",
+        "sass": "*",
+        "sass-embedded": "*",
+        "stylus": "*",
+        "sugarss": "*",
+        "terser": "^5.16.0",
+        "tsx": "^4.8.1",
+        "yaml": "^2.4.2"
+      },
+      "peerDependenciesMeta": {
+        "@types/node": {
+          "optional": true
+        },
+        "jiti": {
+          "optional": true
+        },
+        "less": {
+          "optional": true
+        },
+        "lightningcss": {
+          "optional": true
+        },
+        "sass": {
+          "optional": true
+        },
+        "sass-embedded": {
+          "optional": true
+        },
+        "stylus": {
+          "optional": true
+        },
+        "sugarss": {
+          "optional": true
+        },
+        "terser": {
+          "optional": true
+        },
+        "tsx": {
+          "optional": true
+        },
+        "yaml": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/vitefu": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/vitefu/-/vitefu-1.1.1.tgz",
+      "integrity": "sha512-B/Fegf3i8zh0yFbpzZ21amWzHmuNlLlmJT6n7bu5e+pCHUKQIfXSYokrqOBGEMMe9UG2sostKQF9mml/vYaWJQ==",
+      "license": "MIT",
+      "workspaces": [
+        "tests/deps/*",
+        "tests/projects/*",
+        "tests/projects/workspace/packages/*"
+      ],
+      "peerDependencies": {
+        "vite": "^3.0.0 || ^4.0.0 || ^5.0.0 || ^6.0.0 || ^7.0.0-beta.0"
+      },
+      "peerDependenciesMeta": {
+        "vite": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/web-namespaces": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/web-namespaces/-/web-namespaces-2.0.1.tgz",
+      "integrity": "sha512-bKr1DkiNa2krS7qxNtdrtHAmzuYGFQLiQ13TsorsdT6ULTkPLKuu5+GsFpDlg6JFjUTwX2DyhMPG2be8uPrqsQ==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    },
+    "node_modules/webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha512-2JAn3z8AR6rjK8Sm8orRC0h/bcl/DqL7tRPdGZ4I1CjdF+EaMLmYxBHyXuKL849eucPFhvBoxMsflfOb8kxaeQ==",
+      "license": "BSD-2-Clause"
+    },
+    "node_modules/whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha512-saE57nupxk6v3HY35+jzBwYa0rKSy0XR8JSxZPwgLr7ys0IBzhGviA1/TUGJLmSVqs8pb9AnvICXEuOHLprYTw==",
+      "license": "MIT",
+      "dependencies": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "node_modules/which-pm-runs": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/which-pm-runs/-/which-pm-runs-1.1.0.tgz",
+      "integrity": "sha512-n1brCuqClxfFfq/Rb0ICg9giSZqCS+pLtccdag6C2HyufBrh3fBOiy9nb6ggRMvWOVH5GrdJskj5iGTZNxd7SA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/widest-line": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/widest-line/-/widest-line-5.0.0.tgz",
+      "integrity": "sha512-c9bZp7b5YtRj2wOe6dlj32MK+Bx/M/d+9VB2SHM1OtsUHR0aV0tdP6DWh/iMt0kWi1t5g1Iudu6hQRNd1A4PVA==",
+      "license": "MIT",
+      "dependencies": {
+        "string-width": "^7.0.0"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/wrap-ansi": {
+      "version": "9.0.0",
+      "resolved": "https://registry.npmjs.org/wrap-ansi/-/wrap-ansi-9.0.0.tgz",
+      "integrity": "sha512-G8ura3S+3Z2G+mkgNRq8dqaFZAuxfsxpBB8OCTGRTCtp+l/v9nbFNmCUP1BZMts3G1142MsZfn6eeUKrr4PD1Q==",
+      "license": "MIT",
+      "dependencies": {
+        "ansi-styles": "^6.2.1",
+        "string-width": "^7.0.0",
+        "strip-ansi": "^7.1.0"
+      },
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/chalk/wrap-ansi?sponsor=1"
+      }
+    },
+    "node_modules/xxhash-wasm": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/xxhash-wasm/-/xxhash-wasm-1.1.0.tgz",
+      "integrity": "sha512-147y/6YNh+tlp6nd/2pWq38i9h6mz/EuQ6njIrmW8D1BS5nCqs0P6DG+m6zTGnNz5I+uhZ0SHxBs9BsPrwcKDA==",
+      "license": "MIT"
+    },
+    "node_modules/yargs-parser": {
+      "version": "21.1.1",
+      "resolved": "https://registry.npmjs.org/yargs-parser/-/yargs-parser-21.1.1.tgz",
+      "integrity": "sha512-tVpsJW7DdjecAiFpbIB1e3qxIQsE6NoPc5/eTdrbbIC4h0LVsWhnoa3g+m2HclBIujHzsxZ4VJVA+GUuc2/LBw==",
+      "license": "ISC",
+      "engines": {
+        "node": ">=12"
+      }
+    },
+    "node_modules/yocto-queue": {
+      "version": "1.2.1",
+      "resolved": "https://registry.npmjs.org/yocto-queue/-/yocto-queue-1.2.1.tgz",
+      "integrity": "sha512-AyeEbWOu/TAXdxlV9wmGcR0+yh2j3vYPGOECcIj2S7MkrLyC7ne+oye2BKTItt0ii2PHk4cDy+95+LshzbXnGg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=12.20"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/yocto-spinner": {
+      "version": "0.2.3",
+      "resolved": "https://registry.npmjs.org/yocto-spinner/-/yocto-spinner-0.2.3.tgz",
+      "integrity": "sha512-sqBChb33loEnkoXte1bLg45bEBsOP9N1kzQh5JZNKj/0rik4zAPTNSAVPj3uQAdc6slYJ0Ksc403G2XgxsJQFQ==",
+      "license": "MIT",
+      "dependencies": {
+        "yoctocolors": "^2.1.1"
+      },
+      "engines": {
+        "node": ">=18.19"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/yoctocolors": {
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/yoctocolors/-/yoctocolors-2.1.1.tgz",
+      "integrity": "sha512-GQHQqAopRhwU8Kt1DDM8NjibDXHC8eoh1erhGAJPEyveY9qqVeXvVikNKrDz69sHowPMorbPUrH/mx8c50eiBQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=18"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/zod": {
+      "version": "3.25.76",
+      "resolved": "https://registry.npmjs.org/zod/-/zod-3.25.76.tgz",
+      "integrity": "sha512-gzUt/qt81nXsFGKIFcC3YnfEAx5NkunCfnDlvuBSSFS02bcXu4Lmea0AFIUwbLWxWPx3d9p8S5QoaujKcNQxcQ==",
+      "license": "MIT",
+      "funding": {
+        "url": "https://github.com/sponsors/colinhacks"
+      }
+    },
+    "node_modules/zod-to-json-schema": {
+      "version": "3.24.6",
+      "resolved": "https://registry.npmjs.org/zod-to-json-schema/-/zod-to-json-schema-3.24.6.tgz",
+      "integrity": "sha512-h/z3PKvcTcTetyjl1fkj79MHNEjm+HpD6NXheWjzOekY7kV+lwDYnHw+ivHkijnCSMz1yJaWBD9vu/Fcmk+vEg==",
+      "license": "ISC",
+      "peerDependencies": {
+        "zod": "^3.24.1"
+      }
+    },
+    "node_modules/zod-to-ts": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/zod-to-ts/-/zod-to-ts-1.2.0.tgz",
+      "integrity": "sha512-x30XE43V+InwGpvTySRNz9kB7qFU8DlyEy7BsSTCHPH1R0QasMmHWZDCzYm6bVXtj/9NNJAZF3jW8rzFvH5OFA==",
+      "peerDependencies": {
+        "typescript": "^4.9.4 || ^5.0.2",
+        "zod": "^3"
+      }
+    },
+    "node_modules/zwitch": {
+      "version": "2.0.4",
+      "resolved": "https://registry.npmjs.org/zwitch/-/zwitch-2.0.4.tgz",
+      "integrity": "sha512-bXE4cR/kVZhKZX/RjPEflHaKVhUVl85noU3v6b8apfQEc1x4A+zBxjZ4lN8LqGd6WZ3dl98pY4o717VFmoPp+A==",
+      "license": "MIT",
+      "funding": {
+        "type": "github",
+        "url": "https://github.com/sponsors/wooorm"
+      }
+    }
+  }
+}
diff --git a/templates/starlight-shell/package.json b/templates/starlight-shell/package.json
new file mode 100644
index 00000000..ce1feebb
--- /dev/null
+++ b/templates/starlight-shell/package.json
@@ -0,0 +1,22 @@
+{
+  "name": "starlight-shell",
+  "type": "module",
+  "version": "0.0.1",
+  "scripts": {
+    "dev": "astro dev",
+    "start": "astro dev",
+    "build": "astro build",
+    "preview": "astro preview",
+    "astro": "astro"
+  },
+  "dependencies": {
+    "@astrojs/starlight": "^0.35.2",
+    "astro": "^5.6.1",
+    "sharp": "^0.34.2",
+    "starlight-contextual-menu": "^0.1.3",
+    "starlight-image-zoom": "^0.13.0",
+    "starlight-links-validator": "^0.17.0",
+    "starlight-llms-txt": "^0.6.0",
+    "starlight-site-graph": "^0.4.1"
+  }
+}
\ No newline at end of file
diff --git a/templates/starlight-shell/public/favicon.svg b/templates/starlight-shell/public/favicon.svg
new file mode 100644
index 00000000..cba5ac14
--- /dev/null
+++ b/templates/starlight-shell/public/favicon.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 128 128"><path fill-rule="evenodd" d="M81 36 64 0 47 36l-1 2-9-10a6 6 0 0 0-9 9l10 10h-2L0 64l36 17h2L28 91a6 6 0 1 0 9 9l9-10 1 2 17 36 17-36v-2l9 10a6 6 0 1 0 9-9l-9-9 2-1 36-17-36-17-2-1 9-9a6 6 0 1 0-9-9l-9 10v-2Zm-17 2-2 5c-4 8-11 15-19 19l-5 2 5 2c8 4 15 11 19 19l2 5 2-5c4-8 11-15 19-19l5-2-5-2c-8-4-15-11-19-19l-2-5Z" clip-rule="evenodd"/><path d="M118 19a6 6 0 0 0-9-9l-3 3a6 6 0 1 0 9 9l3-3Zm-96 4c-2 2-6 2-9 0l-3-3a6 6 0 1 1 9-9l3 3c3 2 3 6 0 9Zm0 82c-2-2-6-2-9 0l-3 3a6 6 0 1 0 9 9l3-3c3-2 3-6 0-9Zm96 4a6 6 0 0 1-9 9l-3-3a6 6 0 1 1 9-9l3 3Z"/><style>path{fill:#000}@media (prefers-color-scheme:dark){path{fill:#fff}}</style></svg>
\ No newline at end of file
diff --git a/templates/starlight-shell/src/assets/houston.webp b/templates/starlight-shell/src/assets/houston.webp
new file mode 100644
index 00000000..930c1649
Binary files /dev/null and b/templates/starlight-shell/src/assets/houston.webp differ
diff --git a/templates/starlight-shell/src/content.config.ts b/templates/starlight-shell/src/content.config.ts
new file mode 100644
index 00000000..d9ee8c9d
--- /dev/null
+++ b/templates/starlight-shell/src/content.config.ts
@@ -0,0 +1,7 @@
+import { defineCollection } from 'astro:content';
+import { docsLoader } from '@astrojs/starlight/loaders';
+import { docsSchema } from '@astrojs/starlight/schema';
+
+export const collections = {
+	docs: defineCollection({ loader: docsLoader(), schema: docsSchema() }),
+};
diff --git a/templates/starlight-shell/src/content/docs/guides/example.md b/templates/starlight-shell/src/content/docs/guides/example.md
new file mode 100644
index 00000000..ebd0f3bc
--- /dev/null
+++ b/templates/starlight-shell/src/content/docs/guides/example.md
@@ -0,0 +1,11 @@
+---
+title: Example Guide
+description: A guide in my new Starlight docs site.
+---
+
+Guides lead a user through a specific task they want to accomplish, often with a sequence of steps.
+Writing a good guide requires thinking about what your users are trying to do.
+
+## Further reading
+
+- Read [about how-to guides](https://diataxis.fr/how-to-guides/) in the Diátaxis framework
diff --git a/templates/starlight-shell/src/content/docs/index.mdx b/templates/starlight-shell/src/content/docs/index.mdx
new file mode 100644
index 00000000..664b6819
--- /dev/null
+++ b/templates/starlight-shell/src/content/docs/index.mdx
@@ -0,0 +1,36 @@
+---
+title: Welcome to Starlight
+description: Get started building your docs site with Starlight.
+template: splash
+hero:
+  tagline: Congrats on setting up a new Starlight project!
+  image:
+    file: ../../assets/houston.webp
+  actions:
+    - text: Example Guide
+      link: /guides/example/
+      icon: right-arrow
+    - text: Read the Starlight docs
+      link: https://starlight.astro.build
+      icon: external
+      variant: minimal
+---
+
+import { Card, CardGrid } from '@astrojs/starlight/components';
+
+## Next steps
+
+<CardGrid stagger>
+	<Card title="Update content" icon="pencil">
+		Edit `src/content/docs/index.mdx` to see this page change.
+	</Card>
+	<Card title="Add new content" icon="add-document">
+		Add Markdown or MDX files to `src/content/docs` to create new pages.
+	</Card>
+	<Card title="Configure your site" icon="setting">
+		Edit your `sidebar` and other config in `astro.config.mjs`.
+	</Card>
+	<Card title="Read the docs" icon="open-book">
+		Learn more in [the Starlight Docs](https://starlight.astro.build/).
+	</Card>
+</CardGrid>
diff --git a/templates/starlight-shell/src/content/docs/reference/example.md b/templates/starlight-shell/src/content/docs/reference/example.md
new file mode 100644
index 00000000..0224f096
--- /dev/null
+++ b/templates/starlight-shell/src/content/docs/reference/example.md
@@ -0,0 +1,11 @@
+---
+title: Example Reference
+description: A reference page in my new Starlight docs site.
+---
+
+Reference pages are ideal for outlining how things work in terse and clear terms.
+Less concerned with telling a story or addressing a specific use case, they should give a comprehensive outline of what you're documenting.
+
+## Further reading
+
+- Read [about reference](https://diataxis.fr/reference/) in the Diátaxis framework
diff --git a/templates/starlight-shell/tsconfig.json b/templates/starlight-shell/tsconfig.json
new file mode 100644
index 00000000..8bf91d3b
--- /dev/null
+++ b/templates/starlight-shell/tsconfig.json
@@ -0,0 +1,5 @@
+{
+  "extends": "astro/tsconfigs/strict",
+  "include": [".astro/types.d.ts", "**/*"],
+  "exclude": ["dist"]
+}
diff --git a/templates/templ-shell/.envrc b/templates/templ-shell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/templ-shell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/templ-shell/.gitignore b/templates/templ-shell/.gitignore
new file mode 100644
index 00000000..53e1d4f0
--- /dev/null
+++ b/templates/templ-shell/.gitignore
@@ -0,0 +1,3 @@
+.direnv
+result
+*_templ.go
diff --git a/templates/templ-shell/flake.lock b/templates/templ-shell/flake.lock
new file mode 100644
index 00000000..6ea7506b
--- /dev/null
+++ b/templates/templ-shell/flake.lock
@@ -0,0 +1,48 @@
+{
+  "nodes": {
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1747426788,
+        "narHash": "sha256-N4cp0asTsJCnRMFZ/k19V9akkxb7J/opG+K+jU57JGc=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "12a55407652e04dcf2309436eb06fef0d3713ef3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1753006367,
+        "narHash": "sha256-tzbhc4XttkyEhswByk5R38l+ztN9UDbnj0cTcP6Hp9A=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "421b56313c65a0815a52b424777f55acf0b56ddf",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/templ-shell/flake.nix b/templates/templ-shell/flake.nix
new file mode 100644
index 00000000..788d5487
--- /dev/null
+++ b/templates/templ-shell/flake.nix
@@ -0,0 +1,113 @@
+{
+  description = "A development shell for go + templ";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        gx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/go.mod'';
+          description = "Edit go.mod";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+
+      buildWithSpecificGo = pkg: pkg.override {buildGoModule = pkgs.buildGo124Module;};
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            alejandra # Nix
+            nixd
+            statix
+            deadnix
+
+            go_1_24 # Go Tools
+            air
+            gopls
+            golangci-lint
+            (buildWithSpecificGo revive)
+            (buildWithSpecificGo templ)
+            (buildWithSpecificGo golines)
+            (buildWithSpecificGo golangci-lint-langserver)
+            (buildWithSpecificGo gomarkdoc)
+            (buildWithSpecificGo gotests)
+            (buildWithSpecificGo gotools)
+            (buildWithSpecificGo reftools)
+            pprof
+            graphviz
+            goreleaser
+            cobra-cli
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Welcome to the go-templ devshell!"
+        '';
+      };
+
+      packages = {
+        # default = pkgs.buildGoModule {
+        #   pname = "my-go-project";
+        #   version = "0.0.1";
+        #   src = ./.;
+        #   vendorHash = "";
+        #   doCheck = false;
+        #   meta = with pkgs.lib; {
+        #     description = "My Go project";
+        #     homepage = "https://github.com/connerohnesorge/my-go-project";
+        #     license = licenses.asl20;
+        #     maintainers = with maintainers; [connerohnesorge];
+        #   };
+        # };
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/tla-shell/.claude/settings.json b/templates/tla-shell/.claude/settings.json
new file mode 100644
index 00000000..0967ef42
--- /dev/null
+++ b/templates/tla-shell/.claude/settings.json
@@ -0,0 +1 @@
+{}
diff --git a/templates/tla-shell/.envrc b/templates/tla-shell/.envrc
new file mode 100644
index 00000000..cffc922b
--- /dev/null
+++ b/templates/tla-shell/.envrc
@@ -0,0 +1 @@
+use flake . --impure
diff --git a/templates/tla-shell/.gitignore b/templates/tla-shell/.gitignore
new file mode 100644
index 00000000..932e2ca7
--- /dev/null
+++ b/templates/tla-shell/.gitignore
@@ -0,0 +1,6 @@
+.direnv
+result
+*.test
+logs
+*.log
+.DS_Store
diff --git a/templates/tla-shell/flake.lock b/templates/tla-shell/flake.lock
new file mode 100644
index 00000000..d7476803
--- /dev/null
+++ b/templates/tla-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1747426788,
+        "narHash": "sha256-N4cp0asTsJCnRMFZ/k19V9akkxb7J/opG+K+jU57JGc=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "12a55407652e04dcf2309436eb06fef0d3713ef3",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1752055615,
+        "narHash": "sha256-19m7P4O/Aw/6+CzncWMAJu89JaKeMh3aMle1CNQSIwM=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "c9d477b5d5bd7f26adddd3f96cfd6a904768d4f9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/tla-shell/flake.nix b/templates/tla-shell/flake.nix
new file mode 100644
index 00000000..ef9e45a5
--- /dev/null
+++ b/templates/tla-shell/flake.nix
@@ -0,0 +1,119 @@
+{
+  description = "Dev shell for TLA+ / Apalache / Alloy with handy scripts";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+
+    # Formatting (optional but nice)
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [
+          (final: prev: {
+            # Overlays spot, if you need to pin or adjust anything later.
+            # Example: final.buildGoModule = prev.buildGo124Module;
+          })
+        ];
+      };
+
+      # Helper to make scripts repo-root aware and exec the payload
+      rooted = exec:
+        builtins.concatStringsSep "\n" [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel 2>/dev/null || pwd)"''
+          exec
+        ];
+
+      # Common deps for scripts
+      jdk = pkgs.jdk17;
+      inherit (pkgs) tlaplusToolbox tlaplus alloy;
+
+      # Repo-focused scripts for TLA+ / Alloy projects
+      scripts = {
+        # --- Quality of life
+        dx = {
+          description = "Edit flake.nix";
+          exec = rooted ''"$EDITOR" "$REPO_ROOT"/flake.nix'';
+          deps = [pkgs.bash];
+        };
+      };
+
+      # Turn the scripts attrset into actual packages
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (name: script:
+          pkgs.writeShellApplication {
+            inherit name;
+            text = script.exec;
+            runtimeInputs = script.deps or [];
+          })
+        scripts;
+
+      treefmtModule = {
+        projectRootFile = "flake.nix";
+        programs.alejandra.enable = true;
+      };
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "tla-alloy-dev";
+        packages =
+          (with pkgs; [
+            # Java & tools
+            jdk
+
+            # Formal tools
+            tlaplus
+            alloy
+            graphviz
+
+            # Nix / editor helpers
+            alejandra
+            nixd
+            statix
+            deadnix
+            direnv
+            git
+            jq
+            fd
+            ripgrep
+          ])
+          ++ pkgs.lib.optionals pkgs.stdenv.isLinux [
+            # Linux-only formal tools
+            tlaplusToolbox
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          export JAVA_HOME=${jdk}
+          echo "[tla-alloy-dev] JAVA_HOME set → ${jdk}"
+          if [ -f .envrc ]; then
+            echo "direnv: .envrc detected (run 'direnv allow' if first time)."
+          else
+            echo "Tip: echo 'use flake' > .envrc && direnv allow"
+          fi
+        '';
+      };
+
+      # Expose scripts as `nix run .#tla:tlc` etc.
+      apps =
+        pkgs.lib.mapAttrs (n: p: {
+          type = "app";
+          program = "${p}/bin/${n}";
+        })
+        scriptPackages;
+
+      # Formatter (treefmt wrapper)
+      formatter = treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/tla-shell/go.mod b/templates/tla-shell/go.mod
new file mode 100644
index 00000000..d69c1ec1
--- /dev/null
+++ b/templates/tla-shell/go.mod
@@ -0,0 +1,3 @@
+module go-shell
+
+go 1.24.3
diff --git a/templates/tla-shell/main.go b/templates/tla-shell/main.go
new file mode 100644
index 00000000..50e8d8d3
--- /dev/null
+++ b/templates/tla-shell/main.go
@@ -0,0 +1,7 @@
+package main
+
+import "fmt"
+
+func main() {
+	fmt.Println("vim-go")
+}
diff --git a/templates/typescript-shell/README.md b/templates/typescript-shell/README.md
new file mode 100644
index 00000000..f001a432
--- /dev/null
+++ b/templates/typescript-shell/README.md
@@ -0,0 +1,211 @@
+# TypeScript Development Shell Template
+
+A comprehensive TypeScript development environment with modern tooling for building high-quality TypeScript applications.
+
+## Features
+
+### Core TypeScript Tooling
+- **TypeScript Compiler** - Latest TypeScript with ES2022+ support
+- **tsx** - Fast TypeScript execution and development server
+- **Node.js** - JavaScript runtime with TypeScript support
+
+### Multiple Linting Options
+- **ESLint** - Configurable JavaScript/TypeScript linter
+- **oxlint** - Fast Rust-based linter for performance
+- **Biome** - All-in-one formatter and linter
+
+### Language Servers (LSP)
+- **TypeScript Language Server** - Rich IDE integration
+- **Tailwind CSS Language Server** - CSS framework support
+- **HTML/CSS/JSON LSPs** - Complete web development support
+- **YAML Language Server** - Configuration file support
+
+### Package Managers
+- **npm** - Node Package Manager
+- **yarn** - Alternative package manager
+- **pnpm** - Fast, disk space efficient
+- **bun** - Fast all-in-one JavaScript runtime
+
+### Development Tools
+- **Prettier** - Code formatter
+- **Vitest** - Modern testing framework
+- **Playwright** - E2E testing capabilities
+- **Tailwind CSS** - Utility-first CSS framework
+- **Vite/Webpack/Parcel** - Build tools
+
+## Quick Start
+
+```bash
+# Create new project from template
+nix flake init -t github:connerohnesorge/dotfiles#typescript-shell
+
+# Enter development shell
+nix develop
+
+# Initialize TypeScript project
+init-ts
+init-package
+
+# Start development
+dev
+```
+
+## Available Commands
+
+### Project Setup
+- `init-ts` - Initialize TypeScript project with modern config
+- `init-package` - Initialize package.json
+- `tx` - Edit tsconfig.json
+- `px` - Edit package.json
+
+### Development
+- `dev` - Start development server with tsx watch
+- `typecheck` - Run TypeScript type checking
+- `build` - Build TypeScript project
+- `test` - Run tests with Vitest
+
+### Code Quality
+- `lint-eslint` - Lint with ESLint
+- `lint-oxlint` - Lint with oxlint (fast)
+- `lint-biome` - Lint with Biome
+- `format-prettier` - Format with Prettier
+- `format-biome` - Format with Biome
+
+### Utilities
+- `clean` - Clean build artifacts
+- `dx` - Edit flake.nix
+
+## TypeScript Configuration
+
+The template initializes TypeScript with modern settings:
+
+```json
+{
+  "compilerOptions": {
+    "target": "ES2022",
+    "module": "ESNext",
+    "moduleResolution": "bundler",
+    "allowImportingTsExtensions": true,
+    "noEmit": true,
+    "strict": true
+  }
+}
+```
+
+## Linting Strategy
+
+Choose the linting approach that fits your project:
+
+### ESLint (Traditional)
+- Most configurable
+- Extensive plugin ecosystem
+- Good TypeScript integration
+
+### oxlint (Performance)
+- Rust-based for speed
+- Minimal configuration
+- Fast feedback loops
+
+### Biome (All-in-one)
+- Combined linting and formatting
+- Fast Rust implementation
+- Simple configuration
+
+## Testing Setup
+
+Vitest is included for modern TypeScript testing:
+
+```typescript
+// vitest.config.ts
+import { defineConfig } from 'vitest/config'
+
+export default defineConfig({
+  test: {
+    environment: 'node',
+    globals: true,
+  },
+})
+```
+
+## Editor Integration
+
+The included language servers provide rich IDE features:
+
+- **TypeScript LSP** - Type checking, autocomplete, refactoring
+- **Tailwind CSS LSP** - Class name completion and validation
+- **ESLint LSP** - Real-time linting feedback
+
+## Package Management
+
+Multiple package managers are available:
+
+```bash
+# npm (traditional)
+npm install package-name
+
+# yarn (alternative)
+yarn add package-name
+
+# pnpm (efficient)
+pnpm add package-name
+
+# bun (fast)
+bun add package-name
+```
+
+## Build Tools
+
+Choose your preferred build tool:
+
+- **Vite** - Fast development and building
+- **Webpack** - Mature bundler with extensive plugins
+- **Parcel** - Zero-configuration build tool
+
+## Platform Support
+
+- ✅ x86_64-linux (Intel/AMD Linux)
+- ✅ aarch64-linux (ARM64 Linux)
+- ✅ x86_64-darwin (Intel macOS)
+- ✅ aarch64-darwin (Apple Silicon macOS)
+
+## Example Project Structure
+
+```
+my-typescript-project/
+├── src/
+│   ├── index.ts          # Main entry point
+│   ├── types/            # Type definitions
+│   └── utils/            # Utility functions
+├── tests/
+│   └── index.test.ts     # Vitest tests
+├── package.json          # Dependencies
+├── tsconfig.json         # TypeScript config
+├── vitest.config.ts      # Test configuration
+├── .eslintrc.js          # ESLint config (optional)
+├── biome.json            # Biome config (optional)
+└── flake.nix             # Nix development environment
+```
+
+## Tips
+
+1. **Start Simple**: Use `init-ts && init-package` to set up basics
+2. **Choose One Linter**: Pick ESLint, oxlint, or Biome - don't mix
+3. **Use tsx for Development**: Fast TypeScript execution without compilation
+4. **Type-only Imports**: Use `import type` for type-only imports
+5. **Strict Mode**: The template enables strict TypeScript checking
+
+## Troubleshooting
+
+### Common Issues
+
+**"Module not found"**: Check your tsconfig.json moduleResolution setting
+**"TypeScript errors in IDE"**: Ensure TypeScript LSP is running
+**"Slow linting"**: Try oxlint for faster feedback
+**"Build errors"**: Run `typecheck` to see TypeScript issues
+
+### Performance Tips
+
+- Use `oxlint` for faster linting
+- Use `bun` for faster package installation
+- Use `tsx` instead of `tsc && node` for development
+- Enable TypeScript incremental compilation
\ No newline at end of file
diff --git a/templates/typescript-shell/flake.lock b/templates/typescript-shell/flake.lock
new file mode 100644
index 00000000..c08ddc59
--- /dev/null
+++ b/templates/typescript-shell/flake.lock
@@ -0,0 +1,82 @@
+{
+  "nodes": {
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1754151594,
+        "narHash": "sha256-S30TWshtDmNlU30u842RidFUraKj1f2dd4nrKRHm3gE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "7b6929d8b900de3142638310f8bc40cff4f2c507",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1754061284,
+        "narHash": "sha256-ONcNxdSiPyJ9qavMPJYAXDNBzYobHRxw0WbT38lKbwU=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "58bd4da459f0a39e506847109a2a5cfceb837796",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/typescript-shell/flake.nix b/templates/typescript-shell/flake.nix
new file mode 100644
index 00000000..f785d4fe
--- /dev/null
+++ b/templates/typescript-shell/flake.nix
@@ -0,0 +1,141 @@
+{
+  description = "A development shell for TypeScript";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+  };
+  outputs = {
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        config.allowUnfree = true;
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+          deps = [pkgs.git];
+        };
+        tx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/tsconfig.json'';
+          description = "Edit tsconfig.json";
+        };
+        px = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/package.json'';
+          description = "Edit package.json";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "typescript-dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            # Nix tooling
+            alejandra
+            nixd
+            statix
+            deadnix
+
+            # TypeScript core
+            typescript
+            nodejs
+            tsx # Fast TypeScript execution
+
+            # Package managers
+            bun
+
+            # Linters and formatters
+            eslint
+            oxlint
+            biome
+            nodePackages.prettier
+
+            # Language servers
+            typescript-language-server
+            tailwindcss-language-server
+            vscode-langservers-extracted # HTML, CSS, JSON, ESLint LSPs
+            yaml-language-server
+
+            # CSS and styling
+            tailwindcss
+            nodePackages.autoprefixer
+
+            # Utility tools
+            jq # JSON processing
+            nodePackages.concurrently # Run multiple commands
+            nodePackages.nodemon # File watching
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Available commands:"
+          ${pkgs.lib.concatStringsSep "\n" (
+            pkgs.lib.mapAttrsToList (name: script: ''echo "  ${name} - ${script.description}"'') scripts
+          )}
+        '';
+      };
+
+      packages = {
+        # Example TypeScript package build (uncomment and customize)
+        # default = pkgs.buildNpmPackage {
+        #   pname = "my-typescript-project";
+        #   version = "0.1.0";
+        #   src = ./.;
+        #   npmDepsHash = ""; # Run nix build to get the correct hash
+        #   buildPhase = ''
+        #     npm run build
+        #   '';
+        #   installPhase = ''
+        #     mkdir -p $out
+        #     cp -r dist/* $out/
+        #   '';
+        #   meta = with pkgs.lib; {
+        #     description = "My TypeScript project";
+        #     homepage = "https://github.com/user/my-typescript-project";
+        #     license = licenses.mit;
+        #     maintainers = with maintainers; [ ];
+        #   };
+        # };
+      };
+
+      formatter = let
+        treefmtModule = {
+          projectRootFile = "flake.nix";
+          programs = {
+            alejandra.enable = true; # Nix formatter
+            prettier.enable = true; # JavaScript/TypeScript formatter
+          };
+        };
+      in
+        treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}
diff --git a/templates/zig-shell/.envrc b/templates/zig-shell/.envrc
new file mode 100644
index 00000000..3550a30f
--- /dev/null
+++ b/templates/zig-shell/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/templates/zig-shell/.gitignore b/templates/zig-shell/.gitignore
new file mode 100644
index 00000000..5c056be2
--- /dev/null
+++ b/templates/zig-shell/.gitignore
@@ -0,0 +1,8 @@
+
+result
+.direnv/
+zig-cache/
+zig-out/
+build/
+build-*/
+docgen_tmp/
diff --git a/templates/zig-shell/README.md b/templates/zig-shell/README.md
new file mode 100644
index 00000000..e69de29b
diff --git a/templates/zig-shell/flake.lock b/templates/zig-shell/flake.lock
new file mode 100644
index 00000000..eeaa63f7
--- /dev/null
+++ b/templates/zig-shell/flake.lock
@@ -0,0 +1,214 @@
+{
+  "nodes": {
+    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1696426674,
+        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_2": {
+      "inputs": {
+        "systems": "systems_2"
+      },
+      "locked": {
+        "lastModified": 1705309234,
+        "narHash": "sha256-uNRRNRKmJyCRC/8y1RqBkqWBLM034y4qN7EprSdmgyA=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "1ef2e671c3b0c19053962c07dbda38332dcebf26",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "zls",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1759917807,
+        "narHash": "sha256-WoSazth5EXIJmveWf0zbTMycrgpbLYOth6KhmltMuv0=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "fb5cf53218b987f2703a5bbc292a030c0fe33443",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1708161998,
+        "narHash": "sha256-6KnemmUorCvlcAvGziFosAVkrlWZGIc6UNT9GUYr0jQ=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "84d981bae8b5e783b3b548de505b22880559515f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-23.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs",
+        "treefmt-nix": "treefmt-nix",
+        "zig-overlay": "zig-overlay",
+        "zls": "zls"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_2": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1758728421,
+        "narHash": "sha256-ySNJ008muQAds2JemiyrWYbwbG+V7S5wg3ZVKGHSFu8=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "5eda4ee8121f97b218f7cc73f5172098d458f1d1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "zig-overlay": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "flake-utils": "flake-utils_2",
+        "nixpkgs": "nixpkgs_2"
+      },
+      "locked": {
+        "lastModified": 1760012006,
+        "narHash": "sha256-iS7jyGNee4dr27YQKykcNG/6niR7/Z1GByt0LAuTmrs=",
+        "owner": "mitchellh",
+        "repo": "zig-overlay",
+        "rev": "49727df2b503122d8cd371c4879ee7da88e64b16",
+        "type": "github"
+      },
+      "original": {
+        "owner": "mitchellh",
+        "repo": "zig-overlay",
+        "type": "github"
+      }
+    },
+    "zls": {
+      "inputs": {
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "zig-overlay": [
+          "zig-overlay"
+        ]
+      },
+      "locked": {
+        "lastModified": 1759248838,
+        "narHash": "sha256-SMCAvS/KqLl3zp06F1+21LeAGM0AqWKIEo9uGYPVOsw=",
+        "owner": "zigtools",
+        "repo": "zls",
+        "rev": "fc8e8b2dab059892695d471e6d4200b2d5d80988",
+        "type": "github"
+      },
+      "original": {
+        "owner": "zigtools",
+        "repo": "zls",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/templates/zig-shell/flake.nix b/templates/zig-shell/flake.nix
new file mode 100644
index 00000000..b7a1f36b
--- /dev/null
+++ b/templates/zig-shell/flake.nix
@@ -0,0 +1,141 @@
+{
+  description = "A development shell for zig";
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+    zig-overlay.url = "github:mitchellh/zig-overlay";
+    treefmt-nix.url = "github:numtide/treefmt-nix";
+    treefmt-nix.inputs.nixpkgs.follows = "nixpkgs";
+    zls = {
+      url = "github:zigtools/zls";
+      inputs.nixpkgs.follows = "nixpkgs";
+      inputs.zig-overlay.follows = "zig-overlay";
+    };
+  };
+  outputs = {
+    self,
+    nixpkgs,
+    flake-utils,
+    treefmt-nix,
+    zig-overlay,
+    zls,
+    ...
+  }:
+    flake-utils.lib.eachDefaultSystem (system: let
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [
+          zig-overlay.overlays.default
+          (final: prev: {
+            # Add your overlays here
+            # Example:
+            # my-overlay = final: prev: {
+            #   my-package = prev.callPackage ./my-package { };
+            # };
+          })
+        ];
+      };
+
+      rooted = exec:
+        builtins.concatStringsSep "\n"
+        [
+          ''REPO_ROOT="$(git rev-parse --show-toplevel)"''
+          exec
+        ];
+
+      scripts = {
+        dx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/flake.nix'';
+          description = "Edit flake.nix";
+        };
+        zx = {
+          exec = rooted ''$EDITOR "$REPO_ROOT"/build.zig'';
+          description = "Edit build.zig";
+        };
+      };
+
+      scriptPackages =
+        pkgs.lib.mapAttrs
+        (
+          name: script:
+            pkgs.writeShellApplication {
+              inherit name;
+              text = script.exec;
+              runtimeInputs = script.deps or [];
+            }
+        )
+        scripts;
+
+      treefmtModule = {
+        projectRootFile = "flake.nix";
+        programs = {
+          alejandra.enable = true; # Nix formatter
+          zig.enable = pkgs.stdenv.isLinux; # Zig formatter (Linux only, broken on macOS)
+        };
+      };
+    in {
+      devShells.default = pkgs.mkShell {
+        name = "dev";
+
+        # Available packages on https://search.nixos.org/packages
+        packages = with pkgs;
+          [
+            alejandra # Nix
+            nixd
+            statix
+            deadnix
+
+            zigpkgs.master # Zig Tools
+            lldb # Debugger
+            gdb # Alternative debugger
+          ]
+          ++ pkgs.lib.optionals pkgs.stdenv.isLinux [
+            # Linux-only debugging tools
+            valgrind # Memory debugging (Linux only)
+          ]
+          ++ [
+            zls.packages.${system}.zls # Zig Language Server
+          ]
+          ++ builtins.attrValues scriptPackages;
+
+        shellHook = ''
+          echo "Welcome to the Zig development shell!"
+          echo "Available commands:"
+          echo "  dx - Edit flake.nix"
+          echo "  zx - Edit build.zig"
+          echo "  zig build - Build the project"
+          echo "  zig test - Run tests"
+          echo "  nix fmt - Format code"
+        '';
+      };
+
+      # Example package build (uncomment and customize for your project)
+      # packages = {
+      #   default = pkgs.stdenv.mkDerivation {
+      #     pname = "my-zig-project";
+      #     version = "0.0.1";
+      #     src = ./.;  # Use ./. for your project source
+      #     nativeBuildInputs = [pkgs.zigpkgs.master];
+      #     buildPhase = ''
+      #       zig build
+      #     '';
+      #     installPhase = ''
+      #       mkdir -p $out/bin
+      #       # Copy built executables to $out/bin
+      #       # Adjust this based on your project structure
+      #       if [ -d "zig-out/bin" ]; then
+      #         cp -r zig-out/bin/* $out/bin/
+      #       fi
+      #     '';
+      #     meta = with pkgs.lib; {
+      #       description = "My Zig project";
+      #       homepage = "https://github.com/connerohnesorge/my-zig-project";
+      #       license = licenses.mit;
+      #       maintainers = with maintainers; [connerohnesorge];
+      #     };
+      #   };
+      # };
+
+      formatter = treefmt-nix.lib.mkWrapper pkgs treefmtModule;
+    });
+}