making a ir hub

[g0urav2410]

i am trying to make a ir hub to use with home assistant but when i tried to record the ir signals of my ac remote it sends alot of data like temp, fanspeed, mode, swing etc if i recorded signal that changes temp from 22 to 23 and 23 to 24 but both signals had different fan speeds and i play those signals fanspeed also changes what can i do to change only 1 thing at a time while rest modes n all remains the same until i change them

Protocol  : TEKNOPOINT
Code      : 0x23CB26010024030B0D0000000054 (112 Bits)
Mesg Desc.: Model: 2 (GZ055BE1), Type: 1, Power: On, Mode: 3 (Cool), Temp: 20C, Fan: 5 (High), Swing(V): 1 (Highest), On Timer: Off, Off Timer: Off
uint16_t rawData[227] = {3502, 1608,  538, 1162,  538, 1160,  540, 520,  538, 522,  538, 522,  536, 1162,  538, 522,  538, 520,  538, 1160,  538, 1160,  538, 520,  538, 1160,  538, 520,  538, 522,  536, 1162,  538, 1162,  536, 522,  538, 1162,  538, 1162,  536, 522,  538, 520,  538, 1162,  538, 522,  536, 522,  536, 1162,  538, 520,  538, 522,  536, 522,  538, 522,  538, 520,  538, 522,  538, 520,  538, 520,  538, 522,  538, 522,  538, 520,  536, 522,  538, 520,  538, 520,  538, 502,  556, 522,  538, 522,  538, 1160,  538, 520,  538, 522,  538, 1162,  538, 520,  538, 522,  538, 1162,  536, 1162,  538, 520,  538, 522,  538, 520,  538, 522,  538, 522,  538, 522,  538, 1162,  538, 1162,  538, 522,  536, 1162,  538, 520,  538, 522,  538, 522,  538, 522,  538, 1162,  538, 522,  536, 1164,  538, 1162,  538, 520,  538, 520,  538, 522,  538, 522,  538, 522,  538, 520,  538, 520,  538, 522,  536, 522,  538, 522,  538, 520,  538, 520,  538, 522,  538, 522,  538, 522,  538, 522,  538, 520,  538, 522,  538, 520,  538, 522,  538, 522,  536, 522,  536, 522,  538, 522,  538, 520,  538, 522,  538, 522,  538, 520,  538, 522,  538, 522,  536, 522,  538, 522,  538, 522,  538, 520,  538, 522,  538, 520,  538, 522,  538, 520,  538, 1162,  538, 522,  538, 1162,  538, 522,  538, 1160,  538, 522,  538};  // TEKNOPOINT
uint8_t state[14] = {0x23, 0xCB, 0x26, 0x01, 0x00, 0x24, 0x03, 0x0B, 0x0D, 0x00, 0x00, 0x00, 0x00, 0x54};

this is one recorded signal

please guide me as im a beginner

[crankyoldgit]

Take a look at the example code here: https://github.com/crankyoldgit/IRremoteESP8266/blob/master/examples/TurnOnKelvinatorAC/TurnOnKelvinatorAC.ino

See also:

IRremoteESP8266/src/ir_Teknopoint.cpp

Lines 78 to 81 in 9785cb9

	// Looking for the IRTeknopoint/IRTeknopointAc class?
	// It doesn't exist, it is instead part of the `IRTcl112Ac` class.
	// i.e. use `IRTcl112Ac::setModel(tcl_ac_remote_model_t::GZ055BE1);` for
	// Teknopoint A/Cs.

You will need to use the IRTcl112Ac class to control it the way you want.