Flashing went wrong

[yammaster]

I use this board:

I flash as ESP32 files from Node32s_Wroom32. Flashing finished, but in serial monitor I see this messages:

Whats wrong?

[dlktdr]

Looks like it either didn't flash properly or maybe to the wrong locations?

That check box in the flashing config for donotchgbin can you try it in the opposite. I had a problem flashing myself using that method when I unchecked it worked.

Maybe send the log file here too

[yammaster]

`*************************** START ****************************

START TIME: 202206222156

CONNECT BAUD: 115200
set state: ESP_DL_SYNC
serial port opened

baud:115200
root baud:115200

===============BAUD : 115200===============CALL DEVICE SYNC
connecting...
chip sync ok
mac l: 0x6d10ec34
mac h: 0xd78e3
crc_cal: 13
crc_read: 13
crc_test: 0
ESP32 MAC CRC OK
get mac res: 1
get flash id : 0x0016405e

manufacturer_id: 0x5e

device_id: 0x4016

Wrote 26256 bytes (16027 compressed) at 0x00000000 in 0.2 seconds (effective 970.1 kbit/s)...

Hash of data verified.
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 3161.6 kbit/s)...

Hash of data verified.
Wrote 872000 bytes (496244 compressed) at 0x00010000 in 8.7 seconds (effective 799.8 kbit/s)...

Hash of data verified.
Leaving...

com closed
Use time: 11 s

Download result: PASS

*************************** END ****************************
`

[dlktdr]

Hmm yeah that looks right to me. I wonder if trying this flashing utility will work better. https://github.com/esphome/esphome-flasher/releases/tag/1.4.0

Or I wonder if just leaving the values at zero is correct for the offsets. Sounds like esptool uses them to override the binary programmed ones.

I usually use platformio w/vscode to flash and monitor&upload if you have those installed can try it that way for now.

Can take a look when I'm home tonight in more detail.

[yammaster]

And this is the result with the esphome-flasher:

`ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:8896
load:0x40080400,len:5828
entry 0x400806ac
I (357) cpu_start: Pro cpu up.
I (357) cpu_start: Starting app cpu, entry point is 0x40081ad8
I (0) cpu_start: App cpu up.
D (365) clk: RTC_SLOW_CLK calibration value: 3552922
I (376) cpu_start: Pro cpu start user code
I (376) cpu_start: cpu freq: 240000000
I (376) cpu_start: Application information:
I (381) cpu_start: Project name: BTWifiModule
I (386) cpu_start: App version: ed8f590
I (391) cpu_start: Compile time: Jun 20 2022 00:35:57
I (397) cpu_start: ELF file SHA256: 2c9216916e141503...
I (403) cpu_start: ESP-IDF: 4.3.2
D (408) memory_layout: Checking 11 reserved memory ranges:
D (413) memory_layout: Reserved memory range 0x3ffae000 - 0x3ffae6e0
D (420) memory_layout: Reserved memory range 0x3ffae6e0 - 0x3ffaff10
D (426) memory_layout: Reserved memory range 0x3ffb0000 - 0x3ffb6388
D (433) memory_layout: Reserved memory range 0x3ffb8000 - 0x3ffb9a20
D (439) memory_layout: Reserved memory range 0x3ffbdb28 - 0x3ffbdb5c
D (445) memory_layout: Reserved memory range 0x3ffbdb60 - 0x3ffc6498
D (452) memory_layout: Reserved memory range 0x3ffe0000 - 0x3ffe0440
D (458) memory_layout: Reserved memory range 0x3ffe3f20 - 0x3ffe4350
D (465) memory_layout: Reserved memory range 0x40070000 - 0x40078000
D (471) memory_layout: Reserved memory range 0x40078000 - 0x40080000
D (478) memory_layout: Reserved memory range 0x40080000 - 0x40097fac
D (484) memory_layout: Building list of available memory regions:
D (490) memory_layout: Available memory region 0x3ffaff10 - 0x3ffb0000
D (497) memory_layout: Available memory region 0x3ffb6388 - 0x3ffb8000
D (503) memory_layout: Available memory region 0x3ffb9a20 - 0x3ffbdb28
D (510) memory_layout: Available memory region 0x3ffc6498 - 0x3ffc8000
D (517) memory_layout: Available memory region 0x3ffc8000 - 0x3ffca000
D (523) memory_layout: Available memory region 0x3ffca000 - 0x3ffcc000
D (530) memory_layout: Available memory region 0x3ffcc000 - 0x3ffce000
D (536) memory_layout: Available memory region 0x3ffce000 - 0x3ffd0000
D (543) memory_layout: Available memory region 0x3ffd0000 - 0x3ffd2000
D (550) memory_layout: Available memory region 0x3ffd2000 - 0x3ffd4000
D (556) memory_layout: Available memory region 0x3ffd4000 - 0x3ffd6000
D (563) memory_layout: Available memory region 0x3ffd6000 - 0x3ffd8000
D (569) memory_layout: Available memory region 0x3ffd8000 - 0x3ffda000
D (576) memory_layout: Available memory region 0x3ffda000 - 0x3ffdc000
D (583) memory_layout: Available memory region 0x3ffdc000 - 0x3ffde000
D (589) memory_layout: Available memory region 0x3ffde000 - 0x3ffe0000
D (596) memory_layout: Available memory region 0x3ffe0440 - 0x3ffe3f20
D (602) memory_layout: Available memory region 0x3ffe4350 - 0x3ffe8000
D (609) memory_layout: Available memory region 0x3ffe8000 - 0x3fff0000
D (616) memory_layout: Available memory region 0x3fff0000 - 0x3fff8000
D (622) memory_layout: Available memory region 0x3fff8000 - 0x3fffc000
D (629) memory_layout: Available memory region 0x3fffc000 - 0x40000000
D (635) memory_layout: Available memory region 0x40097fac - 0x40098000
D (642) memory_layout: Available memory region 0x40098000 - 0x4009a000
D (649) memory_layout: Available memory region 0x4009a000 - 0x4009c000
D (655) memory_layout: Available memory region 0x4009c000 - 0x4009e000
D (662) memory_layout: Available memory region 0x4009e000 - 0x400a0000
I (668) heap_init: Initializing. RAM available for dynamic allocation:
I (676) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
D (682) heap_init: New heap initialised at 0x3ffb6388
I (687) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM
D (693) heap_init: New heap initialised at 0x3ffb9a20
I (698) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM
D (704) heap_init: New heap initialised at 0x3ffc6498
I (709) heap_init: At 3FFC6498 len 00019B68 (102 KiB): DRAM
I (715) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (722) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
D (728) heap_init: New heap initialised at 0x40097fac
I (733) heap_init: At 40097FAC len 00008054 (32 KiB): IRAM
D (740) intr_alloc: Connected src 46 to int 2 (cpu 0)
D (745) FLASH_HAL: extra_dummy: 1
D (748) spi_flash: trying chip: issi
D (752) spi_flash: trying chip: gd
D (755) spi_flash: trying chip: mxic
D (759) spi_flash: trying chip: winbond
D (763) spi_flash: trying chip: generic
I (767) spi_flash: detected chip: generic
I (771) spi_flash: flash io: dio
D (775) cpu_start: calling init function: 0x40090ed0
D (780) cpu_start: calling init function: 0x401565a4
D (785) cpu_start: calling init function: 0x40121534
D (790) cpu_start: calling init function: 0x4011fcc0
D (796) cpu_start: calling init function: 0x4011bff0
D (801) intr_alloc: Connected src 17 to int 3 (cpu 0)
D (806) intr_alloc: Connected src 24 to int 9 (cpu 0)
I (811) cpu_start: Starting scheduler on PRO CPU.
D (0) intr_alloc: Connected src 25 to int 2 (cpu 1)
I (0) cpu_start: Starting scheduler on APP CPU.
D (836) heap_init: New heap initialised at 0x3ffe0440
D (836) heap_init: New heap initialised at 0x3ffe4350
D (846) intr_alloc: Connected src 16 to int 12 (cpu 0)
D (846) parD (846) intr_alloc: Connected src 36 to int 3 (cpu 1)
tition: Loading the partition table
I (856) UART: Waiting for settings to be read
D (866) partition: Partition table MD5 verified
D (876) nvs: nvs_open_from_partition btwifi 1
I (876) SETTINGS: Reading settings
D (876) nvs: nvs_get_str_or_blob skey
I (886) SETTINGS: Settings Read Successfully
I (1366) UART: Setting initial role
I (1366) UART: Switching from mode 0 to 2
D (1366) BTDM_INIT: Release DRAM [0x3ffb2730] - [0x3ffb6388]
I (1366) BTDM_INIT: BT controller compile version [6a07b06]
D (1366) BTDM_INIT: .data initialise [0x3ffae6e0] <== [0x4000d890]
D (1376) BTDM_INIT: .bss initialise [0x3ffb0000] - [0x3ffb09a8]
D (1386) BTDM_INIT: .bss initialise [0x3ffb09a8] - [0x3ffb1ddc]
D (1386) BTDM_INIT: .bss initialise [0x3ffb1ddc] - [0x3ffb2730]
D (1396) BTDM_INIT: .bss initialise [0x3ffb8000] - [0x3ffb9a20]
D (1396) BTDM_INIT: .bss initialise [0x3ffbdb28] - [0x3ffbdb5c]
I (1406) system_api: Base MAC address is not set
I (1416) system_api: read default base MAC address from EFUSE
D (1416) efuse: coding scheme 0
D (1426) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1426) efuse: coding scheme 0
D (1436) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1436) efuse: coding scheme 0
D (1446) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1446) efuse: coding scheme 0
D (1456) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1456) efuse: coding scheme 0
D (1466) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1466) efuse: coding scheme 0
D (1476) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1476) efuse: coding scheme 0
D (1486) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
I (1496) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
D (1496) phy_init: loading PHY init data from application binary
D (1506) nvs: nvs_open_from_partition phy 0
D (1506) nvs: nvs_get cal_version 4
D (1516) nvs: nvs_get_str_or_blob cal_mac
D (1516) efuse: coding scheme 0
D (1516) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1526) efuse: coding scheme 0
D (1526) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1536) efuse: coding scheme 0
D (1536) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1546) efuse: coding scheme 0
D (1546) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1556) efuse: coding scheme 0
D (1556) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1566) efuse: coding scheme 0
D (1566) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1576) efuse: coding scheme 0
D (1576) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
D (1586) nvs: nvs_get_str_or_blob cal_data
D (1596) nvs: nvs_close 2
D (1596) efuse: coding scheme 0
D (1596) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1606) efuse: coding scheme 0
D (1606) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1616) efuse: coding scheme 0
D (1616) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1626) efuse: coding scheme 0
D (1626) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1636) efuse: coding scheme 0
D (1636) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1646) efuse: coding scheme 0
D (1646) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1656) efuse: coding scheme 0
D (1656) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit

Brownout detector was triggered

ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:8896
load:0x40080400,len:5828
entry 0x400806ac
I (357) cpu_start: Pro cpu up.
I (357) cpu_start: Starting app cpu, entry point is 0x40081ad8
I (343) cpu_start: App cpu up.
D (365) clk: RTC_SLOW_CLK calibration value: 3557683
I (376) cpu_start: Pro cpu start user code
I (376) cpu_start: cpu freq: 240000000
I (376) cpu_start: Application information:
I (381) cpu_start: Project name: BTWifiModule
I (386) cpu_start: App version: ed8f590
I (391) cpu_start: Compile time: Jun 20 2022 00:35:57
I (397) cpu_start: ELF file SHA256: 2c9216916e141503...
I (403) cpu_start: ESP-IDF: 4.3.2
D (408) memory_layout: Checking 11 reserved memory ranges:
D (414) memory_layout: Reserved memory range 0x3ffae000 - 0x3ffae6e0
D (420) memory_layout: Reserved memory range 0x3ffae6e0 - 0x3ffaff10
D (426) memory_layout: Reserved memory range 0x3ffb0000 - 0x3ffb6388
D (433) memory_layout: Reserved memory range 0x3ffb8000 - 0x3ffb9a20
D (439) memory_layout: Reserved memory range 0x3ffbdb28 - 0x3ffbdb5c
D (446) memory_layout: Reserved memory range 0x3ffbdb60 - 0x3ffc6498
D (452) memory_layout: Reserved memory range 0x3ffe0000 - 0x3ffe0440
D (459) memory_layout: Reserved memory range 0x3ffe3f20 - 0x3ffe4350
D (465) memory_layout: Reserved memory range 0x40070000 - 0x40078000
D (471) memory_layout: Reserved memory range 0x40078000 - 0x40080000
D (478) memory_layout: Reserved memory range 0x40080000 - 0x40097fac
D (484) memory_layout: Building list of available memory regions:
D (490) memory_layout: Available memory region 0x3ffaff10 - 0x3ffb0000
D (497) memory_layout: Available memory region 0x3ffb6388 - 0x3ffb8000
D (504) memory_layout: Available memory region 0x3ffb9a20 - 0x3ffbdb28
D (510) memory_layout: Available memory region 0x3ffc6498 - 0x3ffc8000
D (517) memory_layout: Available memory region 0x3ffc8000 - 0x3ffca000
D (523) memory_layout: Available memory region 0x3ffca000 - 0x3ffcc000
D (530) memory_layout: Available memory region 0x3ffcc000 - 0x3ffce000
D (537) memory_layout: Available memory region 0x3ffce000 - 0x3ffd0000
D (543) memory_layout: Available memory region 0x3ffd0000 - 0x3ffd2000
D (550) memory_layout: Available memory region 0x3ffd2000 - 0x3ffd4000
D (556) memory_layout: Available memory region 0x3ffd4000 - 0x3ffd6000
D (563) memory_layout: Available memory region 0x3ffd6000 - 0x3ffd8000
D (570) memory_layout: Available memory region 0x3ffd8000 - 0x3ffda000
D (576) memory_layout: Available memory region 0x3ffda000 - 0x3ffdc000
D (583) memory_layout: Available memory region 0x3ffdc000 - 0x3ffde000
D (589) memory_layout: Available memory region 0x3ffde000 - 0x3ffe0000
D (596) memory_layout: Available memory region 0x3ffe0440 - 0x3ffe3f20
D (603) memory_layout: Available memory region 0x3ffe4350 - 0x3ffe8000
D (609) memory_layout: Available memory region 0x3ffe8000 - 0x3fff0000
D (616) memory_layout: Available memory region 0x3fff0000 - 0x3fff8000
D (622) memory_layout: Available memory region 0x3fff8000 - 0x3fffc000
D (629) memory_layout: Available memory region 0x3fffc000 - 0x40000000
D (636) memory_layout: Available memory region 0x40097fac - 0x40098000
D (642) memory_layout: Available memory region 0x40098000 - 0x4009a000
D (649) memory_layout: Available memory region 0x4009a000 - 0x4009c000
D (655) memory_layout: Available memory region 0x4009c000 - 0x4009e000
D (662) memory_layout: Available memory region 0x4009e000 - 0x400a0000
I (669) heap_init: Initializing. RAM available for dynamic allocation:
I (676) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
D (682) heap_init: New heap initialised at 0x3ffb6388
I (687) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM
D (693) heap_init: New heap initialised at 0x3ffb9a20
I (698) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM
D (704) heap_init: New heap initialised at 0x3ffc6498
I (709) heap_init: At 3FFC6498 len 00019B68 (102 KiB): DRAM
I (716) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (722) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
D (728) heap_init: New heap initialised at 0x40097fac
I (734) heap_init: At 40097FAC len 00008054 (32 KiB): IRAM
D (740) intr_alloc: Connected src 46 to int 2 (cpu 0)
D (746) FLASH_HAL: extra_dummy: 1
D (748) spi_flash: trying chip: issi
D (752) spi_flash: trying chip: gd
D (755) spi_flash: trying chip: mxic
D (759) spi_flash: trying chip: winbond
D (763) spi_flash: trying chip: generic
I (767) spi_flash: detected chip: generic
I (772) spi_flash: flash io: dio
D (776) cpu_start: calling init function: 0x40090ed0
D (780) cpu_start: calling init function: 0x401565a4
D (785) cpu_start: calling init function: 0x40121534
D (791) cpu_start: calling init function: 0x4011fcc0
D (796) cpu_start: calling init function: 0x4011bff0
D (801) intr_alloc: Connected src 17 to int 3 (cpu 0)
D (806) intr_alloc: Connected src 24 to int 9 (cpu 0)
I (811) cpu_start: Starting scheduler on PRO CPU.
D (0) intr_alloc: Connected src 25 to int 2 (cpu 1)
I (0) cpu_start: Starting scheduler on APP CPU.
D (836) heap_init: New heap initialised at 0x3ffe0440
D (836) heap_init: New heap initialised at 0x3ffe4350
D (846) intr_alloc: Connected src 16 to int 12 (cpu 0)
D (846) parD (846) intr_alloc: Connected src 36 to int 3 (cpu 1)
tition: Loading the partition table
I (856) UART: Waiting for settings to be read
D (866) partition: Partition table MD5 verified
D (876) nvs: nvs_open_from_partition btwifi 1
I (876) SETTINGS: Reading settings
D (876) nvs: nvs_get_str_or_blob skey
I (886) SETTINGS: Settings Read Successfully
I (1366) UART: Setting initial role
I (1366) UART: Switching from mode 0 to 2
D (1366) BTDM_INIT: Release DRAM [0x3ffb2730] - [0x3ffb6388]
I (1366) BTDM_INIT: BT controller compile version [6a07b06]
D (1366) BTDM_INIT: .data initialise [0x3ffae6e0] <== [0x4000d890]
D (1376) BTDM_INIT: .bss initialise [0x3ffb0000] - [0x3ffb09a8]
D (1386) BTDM_INIT: .bss initialise [0x3ffb09a8] - [0x3ffb1ddc]
D (1386) BTDM_INIT: .bss initialise [0x3ffb1ddc] - [0x3ffb2730]
D (1396) BTDM_INIT: .bss initialise [0x3ffb8000] - [0x3ffb9a20]
D (1396) BTDM_INIT: .bss initialise [0x3ffbdb28] - [0x3ffbdb5c]
I (1406) system_api: Base MAC address is not set
I (1416) system_api: read default base MAC address from EFUSE
D (1416) efuse: coding scheme 0
D (1426) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1426) efuse: coding scheme 0
D (1436) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1436) efuse: coding scheme 0
D (1446) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1446) efuse: coding scheme 0
D (1456) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1456) efuse: coding scheme 0
D (1466) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1466) efuse: coding scheme 0
D (1476) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1476) efuse: coding scheme 0
D (1486) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
I (1496) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
D (1496) phy_init: loading PHY init data from application binary
D (1506) nvs: nvs_open_from_partition phy 0
D (1506) nvs: nvs_get cal_version 4
D (1516) nvs: nvs_get_str_or_blob cal_mac
D (1516) efuse: coding scheme 0
D (1516) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1526) efuse: coding scheme 0
D (1526) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1536) efuse: coding scheme 0
D (1536) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1546) efuse: coding scheme 0
D (1546) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1556) efuse: coding scheme 0
D (1556) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1566) efuse: coding scheme 0
D (1566) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1576) efuse: coding scheme 0
D (1576) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
D (1586) nvs: nvs_get_str_or_blob cal_data
D (1596) nvs: nvs_close 2
D (1596) efuse: coding scheme 0
D (1596) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1606) efuse: coding scheme 0
D (1606) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1616) efuse: coding scheme 0
D (1616) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1626) efuse: coding scheme 0
D (1626) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1636) efuse: coding scheme 0
D (1636) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1646) efuse: coding scheme 0
D (1646) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1656) efuse: coding scheme 0
D (1656) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
D (1916) nvs: nvs_open_from_partition bt_config.conf 1
D (1916) nvs: nvs_get_str_or_blob bt_cfg_key0
D (1916) nvs: nvs_get_str_or_blob bt_cfg_key0
D (1916) nvs: nvs_close 3
D (1916) nvs: nvs_open_from_partition bt_config.conf 1
D (1926) nvs: nvs_set_blob bt_cfg_key0 216
D (1926) nvs: nvs_close 4
I (1996) BTCLIENT: Starting Central
I (1996) BTCLIENT: REG_EVT
Connecting to 000000000000
I (2506) SETTINGS: Reading settings
D (2506) nvs: nvs_get_str_or_blob skey
I (2506) SETTINGS: Settings Read Successfully
I (2506) SETTINGS: No data differs, not writing to flash

`

[dlktdr]

Well from that one it appears that the program is actually written on there and running. I can see some of the things I wrote in the log.

But it looks like you have a power problem, there's a brown out detection listed in there and then it reboots.

Are you still powered from USB or is this powered from the radio?

FYI.. I gave it a try tonight and noticed I had the wrong connect commented out. Please try most recent commit from actions. Tested and it works both ways.. still some glitches sometimes when scanning that required a reboot.

[yammaster]

The board was powerd by the pc.
I used another board, flashed with the new firmware and it looks like better in my opinion:

`ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:8896
load:0x40080400,len:5828
entry 0x400806ac
I (357) cpu_start: Pro cpu up.
I (357) cpu_start: Starting app cpu, entry point is 0x40081ad8
I (0) cpu_start: App cpu up.
D (365) clk: RTC_SLOW_CLK calibration value: 3570330
I (376) cpu_start: Pro cpu start user code
I (376) cpu_start: cpu freq: 240000000
I (376) cpu_start: Application information:
I (381) cpu_start: Project name: BTWifiModule
I (386) cpu_start: App version: f6c66af
I (391) cpu_start: Compile time: Jun 23 2022 03:14:39
I (397) cpu_start: ELF file SHA256: ac13ed1585333605...
I (403) cpu_start: ESP-IDF: 4.3.2
D (408) memory_layout: Checking 11 reserved memory ranges:
D (413) memory_layout: Reserved memory range 0x3ffae000 - 0x3ffae6e0
D (420) memory_layout: Reserved memory range 0x3ffae6e0 - 0x3ffaff10
D (426) memory_layout: Reserved memory range 0x3ffb0000 - 0x3ffb6388
D (433) memory_layout: Reserved memory range 0x3ffb8000 - 0x3ffb9a20
D (439) memory_layout: Reserved memory range 0x3ffbdb28 - 0x3ffbdb5c
D (445) memory_layout: Reserved memory range 0x3ffbdb60 - 0x3ffc6498
D (452) memory_layout: Reserved memory range 0x3ffe0000 - 0x3ffe0440
D (458) memory_layout: Reserved memory range 0x3ffe3f20 - 0x3ffe4350
D (465) memory_layout: Reserved memory range 0x40070000 - 0x40078000
D (471) memory_layout: Reserved memory range 0x40078000 - 0x40080000
D (478) memory_layout: Reserved memory range 0x40080000 - 0x40097fac
D (484) memory_layout: Building list of available memory regions:
D (490) memory_layout: Available memory region 0x3ffaff10 - 0x3ffb0000
D (497) memory_layout: Available memory region 0x3ffb6388 - 0x3ffb8000
D (503) memory_layout: Available memory region 0x3ffb9a20 - 0x3ffbdb28
D (510) memory_layout: Available memory region 0x3ffc6498 - 0x3ffc8000
D (517) memory_layout: Available memory region 0x3ffc8000 - 0x3ffca000
D (523) memory_layout: Available memory region 0x3ffca000 - 0x3ffcc000
D (530) memory_layout: Available memory region 0x3ffcc000 - 0x3ffce000
D (536) memory_layout: Available memory region 0x3ffce000 - 0x3ffd0000
D (543) memory_layout: Available memory region 0x3ffd0000 - 0x3ffd2000
D (550) memory_layout: Available memory region 0x3ffd2000 - 0x3ffd4000
D (556) memory_layout: Available memory region 0x3ffd4000 - 0x3ffd6000
D (563) memory_layout: Available memory region 0x3ffd6000 - 0x3ffd8000
D (569) memory_layout: Available memory region 0x3ffd8000 - 0x3ffda000
D (576) memory_layout: Available memory region 0x3ffda000 - 0x3ffdc000
D (583) memory_layout: Available memory region 0x3ffdc000 - 0x3ffde000
D (589) memory_layout: Available memory region 0x3ffde000 - 0x3ffe0000
D (596) memory_layout: Available memory region 0x3ffe0440 - 0x3ffe3f20
D (602) memory_layout: Available memory region 0x3ffe4350 - 0x3ffe8000
D (609) memory_layout: Available memory region 0x3ffe8000 - 0x3fff0000
D (616) memory_layout: Available memory region 0x3fff0000 - 0x3fff8000
D (622) memory_layout: Available memory region 0x3fff8000 - 0x3fffc000
D (629) memory_layout: Available memory region 0x3fffc000 - 0x40000000
D (635) memory_layout: Available memory region 0x40097fac - 0x40098000
D (642) memory_layout: Available memory region 0x40098000 - 0x4009a000
D (648) memory_layout: Available memory region 0x4009a000 - 0x4009c000
D (655) memory_layout: Available memory region 0x4009c000 - 0x4009e000
D (662) memory_layout: Available memory region 0x4009e000 - 0x400a0000
I (668) heap_init: Initializing. RAM available for dynamic allocation:
I (676) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
D (682) heap_init: New heap initialised at 0x3ffb6388
I (687) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM
D (693) heap_init: New heap initialised at 0x3ffb9a20
I (698) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM
D (704) heap_init: New heap initialised at 0x3ffc6498
I (709) heap_init: At 3FFC6498 len 00019B68 (102 KiB): DRAM
I (715) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (722) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
D (728) heap_init: New heap initialised at 0x40097fac
I (733) heap_init: At 40097FAC len 00008054 (32 KiB): IRAM
D (740) intr_alloc: Connected src 46 to int 2 (cpu 0)
D (745) FLASH_HAL: extra_dummy: 1
D (748) spi_flash: trying chip: issi
D (752) spi_flash: trying chip: gd
D (755) spi_flash: trying chip: mxic
D (759) spi_flash: trying chip: winbond
D (763) spi_flash: trying chip: generic
I (767) spi_flash: detected chip: generic
I (771) spi_flash: flash io: dio
D (775) cpu_start: calling init function: 0x40090ed0
D (780) cpu_start: calling init function: 0x40156628
D (785) cpu_start: calling init function: 0x401215b8
D (790) cpu_start: calling init function: 0x4011fd44
D (796) cpu_start: calling init function: 0x4011c074
D (801) intr_alloc: Connected src 17 to int 3 (cpu 0)
D (806) intr_alloc: Connected src 24 to int 9 (cpu 0)
I (811) cpu_start: Starting scheduler on PRO CPU.
D (0) intr_alloc: Connected src 25 to int 2 (cpu 1)
I (0) cpu_start: Starting scheduler on APP CPU.
D (836) heap_init: New heap initialised at 0x3ffe0440
D (836) heap_init: New heap initialised at 0x3ffe4350
D (846) intr_alloc: Connected src 16 to int 12 (cpu 0)
D (846) parD (846) intr_alloc: Connected src 36 to int 3 (cpu 1)
tition: Loading the partition table
I (856) UART: Waiting for settings to be read
D (866) partition: Partition table MD5 verified
D (876) nvs: nvs_open_from_partition btwifi 1
I (876) SETTINGS: Reading settings
D (876) nvs: nvs_get_str_or_blob skey
I (886) SETTINGS: Settings Read Successfully
I (1366) UART: Setting initial role
I (1366) UART: Switching from mode 0 to 2
D (1366) BTDM_INIT: Release DRAM [0x3ffb2730] - [0x3ffb6388]
I (1366) BTDM_INIT: BT controller compile version [6a07b06]
D (1366) BTDM_INIT: .data initialise [0x3ffae6e0] <== [0x4000d890]
D (1376) BTDM_INIT: .bss initialise [0x3ffb0000] - [0x3ffb09a8]
D (1386) BTDM_INIT: .bss initialise [0x3ffb09a8] - [0x3ffb1ddc]
D (1386) BTDM_INIT: .bss initialise [0x3ffb1ddc] - [0x3ffb2730]
D (1396) BTDM_INIT: .bss initialise [0x3ffb8000] - [0x3ffb9a20]
D (1406) BTDM_INIT: .bss initialise [0x3ffbdb28] - [0x3ffbdb5c]
I (1406) system_api: Base MAC address is not set
I (1416) system_api: read default base MAC address from EFUSE
D (1416) efuse: coding scheme 0
D (1426) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1426) efuse: coding scheme 0
D (1436) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1436) efuse: coding scheme 0
D (1446) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1446) efuse: coding scheme 0
D (1456) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1456) efuse: coding scheme 0
D (1466) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1466) efuse: coding scheme 0
D (1476) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1476) efuse: coding scheme 0
D (1486) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
I (1496) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
D (1496) phy_init: loading PHY init data from application binary
D (1506) nvs: nvs_open_from_partition phy 0
D (1506) nvs: nvs_get cal_version 4
D (1516) nvs: nvs_get_str_or_blob cal_mac
D (1516) efuse: coding scheme 0
D (1516) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1526) efuse: coding scheme 0
D (1526) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1536) efuse: coding scheme 0
D (1536) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1546) efuse: coding scheme 0
D (1546) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1556) efuse: coding scheme 0
D (1556) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1566) efuse: coding scheme 0
D (1566) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1576) efuse: coding scheme 0
D (1576) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
D (1586) nvs: nvs_get_str_or_blob cal_data
D (1596) nvs: nvs_close 2
D (1596) efuse: coding scheme 0
D (1596) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 8 bit
D (1606) efuse: coding scheme 0
D (1606) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 0 bit
D (1616) efuse: coding scheme 0
D (1616) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 24 bit
D (1626) efuse: coding scheme 0
D (1626) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 16 bit
D (1636) efuse: coding scheme 0
D (1636) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 8 bit
D (1646) efuse: coding scheme 0
D (1646) efuse: In EFUSE_BLK0__DATA1_REG is used 8 bits starting with 0 bit
D (1656) efuse: coding scheme 0
D (1656) efuse: In EFUSE_BLK0__DATA2_REG is used 8 bits starting with 16 bit
D (1916) nvs: nvs_open_from_partition bt_config.conf 1
D (1916) nvs: nvs_get_str_or_blob bt_cfg_key0
D (1916) nvs: nvs_get_str_or_blob bt_cfg_key0
D (1926) nvs: nvs_close 3
D (1926) nvs: nvs_open_from_partition bt_config.conf 1
D (1926) nvs: nvs_set_blob bt_cfg_key0 216
D (1936) nvs: nvs_close 4
I (2006) BTCLIENT: Starting Central
I (2006) BTCLIENT: REG_EVT
I (2516) SETTINGS: Reading settings
D (2516) nvs: nvs_get_str_or_blob skey
I (2516) SETTINGS: Settings Read Successfully
I (2516) SETTINGS: No data differs, not writing to flash
`
It's only connected with the pc - should I see the ESP within the BT scanner app (nRF Connect) - I didn't.

[dlktdr]

Yes that looks correct. I get,

D (1624) nvs: nvs_close 3
D (1624) nvs: nvs_open_from_partition bt_config.conf 1
D (1628) nvs: nvs_set_blob bt_cfg_key0 216
D (1636) nvs: nvs_close 4
I (1700) BTCLIENT: Starting Central
I (1704) BTCLIENT: REG_EVT
I (2200) SETTINGS: Reading settings
D (2200) nvs: nvs_get_str_or_blob skey
I (2200) SETTINGS: Settings Read Successfully
I (2200) SETTINGS: No data differs, not writing to flash

Is what you should see when in Central Mode (Master/Bluetooth)

You won't be able to see it in the NRF app unless it's in Peripherial mode, it defaults to Central Mode (Master/Bluetooth) until the radio calls for the change.

We just got 2.8 working well with edgeTX PR# 2064. Seems to work with this code and the PARA okay. ... Still some issues, can crash the ESP if you switch modes back/forth sometimes.

[dlktdr]

I don't know if you saw my previous comment but make sure your using the latest push from this repository, https://github.com/dlktdr/BTWifiModule/actions/runs/2546476341 I commented out the wrong line and you can't get a connection with the first one.

[yammaster]

yes I tooked the latest

[yammaster]

YES it works now, I see the channels from the BLE in my TX!
It runs with the other board. The first one boots always twice with the brown message.
Great project, great support Cliff, thanks.

[yammaster]

I've to reconnect after power off - is it right?I've to discover. In model setup the connected field is empty.
If the PARA modul is connected, still there is the BLE id and reconnect automatically.

EDIT: Oops didn't mean to edit this post... but will leave my reply here for future ---

ESP boards can be temperamental with their power. Some of those $5 boards have crap on them for power conditioning, I have 2 I got off amazon that are really sensitive to everything :( Won't even run from a PC power supply with extra filtering added after.

[dlktdr]

Yes that's right in the current state. Have to work on this part still, it's commented out. Was causing a crash in some situations

BTWifiModule/src/bt_client.c

Line 606 in f6c66af

//btc_connect(addr);

[dlktdr]

I should also ask, what did you use to flash the software with on the second board. Should I be changing the Wiki, or does that method work for you? Since your the first one who has tried 💯without compiling in vscode .. That I know of..

[yammaster]

I used the ESPHome-Flasher as the only one flasher for the second board. It could be better when you are changing the Wiki, for easy to use and minimize mistakes.