[BUG]: Switching to rich text editor destroys markdown table formatting

[r10r]

Describe the feature you'd like to see

Hi @fccview,

I noticed that markdown table format is destroyed after switching to the rich text editor.
The setting Table Syntax in Notes is set to Markdown

| Gewinde | Steigung P (mm) | Kernloch Ø (mm) |
|--------|------------------|-----------------|
| M1     | 0.25             | 0.75            |
| M1.2   | 0.25             | 0.95            |
| M1.4   | 0.30             | 1.10            |
| M1.6   | 0.35             | 1.25            |
| M1.8   | 0.35             | 1.45            |
| M2     | 0.40             | 1.60            |
| M2.5   | 0.45             | 2.05            |
| M3     | 0.50             | 2.50            |
| M3.5   | 0.60             | 2.90            |
| M4     | 0.70             | 3.30            |
| M5     | 0.80             | 4.20            |
| M6     | 1.00             | 5.00            |
| M7     | 1.00             | 6.00            |
| M8     | 1.25             | 6.80            |
| M10    | 1.50             | 8.50            |
| M12    | 1.75             | 10.20           |
| M14    | 2.00             | 12.00           |
| M16    | 2.00             | 14.00           |
| M18    | 2.50             | 15.50           |
| M20    | 2.50             | 17.50           |

All spaces used for alignment are squeezed

​| Gewinde | Steigung P (mm) | Kernloch Ø (mm) | |--------|------------------|-----------------| | M1 | 0.25 | 0.75 | | M1.2 | 0.25 | 0.95 | | M1.4 | 0.30 | 1.10 | | M1.6 | 0.35 | 1.25 | | M1.8 | 0.35 | 1.45 | | M2 | 0.40 | 1.60 | | M2.5 | 0.45 | 2.05 | | M3 | 0.50 | 2.50 | | M3.5 | 0.60 | 2.90 | | M4 | 0.70 | 3.30 | | M5 | 0.80 | 4.20 | | M6 | 1.00 | 5.00 | | M7 | 1.00 | 6.00 | | M8 | 1.25 | 6.80 | | M10 | 1.50 | 8.50 | | M12 | 1.75 | 10.20 | | M14 | 2.00 | 12.00 | | M16 | 2.00 | 14.00 | | M18 | 2.50 | 15.50 | | M20 | 2.50 | 17.50 |

As a workaround I now wrap the table in a code block

| Gewinde | Steigung P (mm) | Kernloch Ø (mm) |
|--------|------------------|-----------------|
| M1     | 0.25             | 0.75            |
| M1.2   | 0.25             | 0.95            |
| M1.4   | 0.30             | 1.10            |
| M1.6   | 0.35             | 1.25            |
| M1.8   | 0.35             | 1.45            |
| M2     | 0.40             | 1.60            |
| M2.5   | 0.45             | 2.05            |
| M3     | 0.50             | 2.50            |
| M3.5   | 0.60             | 2.90            |
| M4     | 0.70             | 3.30            |
| M5     | 0.80             | 4.20            |
| M6     | 1.00             | 5.00            |
| M7     | 1.00             | 6.00            |
| M8     | 1.25             | 6.80            |
| M10    | 1.50             | 8.50            |
| M12    | 1.75             | 10.20           |
| M14    | 2.00             | 12.00           |
| M16    | 2.00             | 14.00           |
| M18    | 2.50             | 15.50           |
| M20    | 2.50             | 17.50           |

Version

1.21.0

Wireframes or mockups (optional)

No response

Checklist

• I have searched across other issues to make sure this has not been already suggested.
• I understand this request may be declined if it is not in line with the project's goals.

[fccview]

Hi,

This shouldn't be happening, I wonder if it's that ∅ character, would you be ok to try without it?

Tables stay formatted fine for me, we may need to figure out what's causing this first before I can fix it

[r10r]

You're right it's the Ø character .... After removing it it's working fine.

[r10r]

Ok now table editing is really awesome. Thanks a lot for your quick help.

[fccview]

Awesome, I'll leave this open to remember to fix special characters breaking the table ♥️