Use an intermediate version of the change.

Author: wteiken

arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn13.dtso

@@ -15,11 +15,7 @@
 	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
 };
 
-&pio {
-	/* 1L0 0=key-b (CN15), 1=key-m (CN13) */
-	pcie-2-hog {
-		gpio-hog;
-		gpios = <79 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
+&pcie_2_hog {
+	gpio-hog;
+	output-high;
 };

arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn14.dtso

@@ -15,10 +15,7 @@
 	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
 };
 
-&pio {
-        pcie-3-hog {
-                gpio-hog;
-                gpios = <63 GPIO_ACTIVE_HIGH>;
-                output-high;
-        };
+&pcie_3_hog {
+	gpio-hog;
+	output-high;
 };

arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso

@@ -15,10 +15,7 @@
 	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
 };
 
-&pio {
-	pcie-2-hog {
-		gpio-hog;
-		gpios = <79 GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
+&pcie_2_hog {
+	gpio-hog;
+	output-low;
 };

arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso

@@ -15,10 +15,7 @@
 	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
 };
 
-&pio {
-        pcie-3-hog {
-                gpio-hog;
-                gpios = <63 GPIO_ACTIVE_HIGH>;
-                output-low;
-        };
+&pcie_3_hog {
+	gpio-hog;
+	output-low;
 };

arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi

@@ -567,12 +567,18 @@
          * - mt7988a-bananapi-bpi-r4-pro-cn13
          * - mt7988a-bananapi-bpi-r4-pro-cn15
 	 */
+        pcie_2_hog: pcie-2-hog {
+                gpios = <79 GPIO_ACTIVE_HIGH>;
+        };
 
 	/* pcie-3-hog (1L1 0=key-b (CN18), 1=key-m (CN14))
 	 * Add one overlay to set (CN14 is enabled by default):
          * - mt7988a-bananapi-bpi-r4-pro-cn14
          * - mt7988a-bananapi-bpi-r4-pro-cn18
 	 */
+        pcie_3_hog: pcie-3-hog {
+                gpios = <63 GPIO_ACTIVE_HIGH>;
+        };
 
 	pwm0_pins: pwm0-pins {
 		mux {