Get-ExportedTypesFromRuntimeAssemblySafely.ps1

function Get-ExportedTypesFromRuntimeAssemblySafely {
    # .SYNOPSIS
    # Obtains the exported types from a RuntimeAssembly object.
    #
    # .DESCRIPTION
    # Given a RuntimeAssembly object, this function retrieves the exported
    # types from the assembly, but does so in a way that suppresses errors from
    # being displayed to the console. This function is useful when you want to
    # obtain the exported types from an assembly, but you don't want to see any
    # errors that may occur during the process. The function returns $true if
    # no errors occurred; otherwise, it returns $false.
    #
    # .PARAMETER ReferenceToArrayOfExportedTypes
    # This parameter is required; it is a reference to a System.Object[]
    # (array) that will be used to store output. If the export of types is
    # successful, the function guarantees that the referenced object will
    # always be an array, even when a single item is returned. If the export of
    # types is unsuccessful, the referenced object is undefined.
    #
    # .PARAMETER ReferenceToSystemReflectionRuntimeAssembly
    # This parameter is a reference (pointer) to a
    # System.Reflection.RuntimeAssembly object from which the function will get
    # its exported types.
    #
    # .EXAMPLE
    # $arrReturnData = @()
    # $arrAssemblies = @([AppDomain]::CurrentDomain.GetAssemblies())
    # $boolSuccess = Get-ExportedTypesFromRuntimeAssemblySafely -ReferenceToArrayOfExportedTypes ([ref]$arrReturnData) -ReferenceToSystemReflectionRuntimeAssembly ([ref]($arrAssemblies[0]))
    #
    # .EXAMPLE
    # $arrReturnData = @()
    # $arrAssemblies = @([AppDomain]::CurrentDomain.GetAssemblies())
    # $boolSuccess = Get-ExportedTypesFromRuntimeAssemblySafely ([ref]$arrReturnData) ([ref]($arrAssemblies[0]))
    #
    # .INPUTS
    # None. You can't pipe objects to
    # Get-ExportedTypesFromRuntimeAssemblySafely.
    #
    # .OUTPUTS
    # System.Boolean. Get-ExportedTypesFromRuntimeAssemblySafely returns a
    # boolean value indiciating whether the process completed successfully.
    # $true means the process completed successfully; $false means there was an
    # error.
    #
    # .NOTES
    # This function also supports the use of positional parameters instead of named
    # parameters. If positional parameters are used intead of named parameters,
    # then two positional parameters are required:
    #
    # The first positional parameter is a reference to a System.Object[] (array)
    # that will be used to store output. The function guarantees that the output
    # will always be an array, even when a single item is returned.
    #
    # The second positional parameter is a reference (pointer) to a
    # System.Reflection.RuntimeAssembly object from which the function will get
    # its exported types.
    #
    # Version: 2.0.20241223.0

    #region License ########################################################
    # Copyright (c) 2024 Frank Lesniak
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the
    # "Software"), to deal in the Software without restriction, including
    # without limitation the rights to use, copy, modify, merge, publish,
    # distribute, sublicense, and/or sell copies of the Software, and to permit
    # persons to whom the Software is furnished to do so, subject to the
    # following conditions:
    #
    # The above copyright notice and this permission notice shall be included
    # in all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
    # OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
    # NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
    # DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
    # OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
    # USE OR OTHER DEALINGS IN THE SOFTWARE.
    #endregion License ########################################################

    param (
        [ref]$ReferenceToArrayOfExportedTypes = ([ref]$null),
        [ref]$ReferenceToSystemReflectionRuntimeAssembly = ([ref]$null)
    )

    #region FunctionsToSupportErrorHandling ################################
    function Get-ReferenceToLastError {
        # .SYNOPSIS
        # Gets a reference (memory pointer) to the last error that occurred.
        #
        # .DESCRIPTION
        # Returns a reference (memory pointer) to $null ([ref]$null) if no
        # errors on on the $error stack; otherwise, returns a reference to the
        # last error that occurred.
        #
        # .EXAMPLE
        # # Intentionally empty trap statement to prevent terminating errors
        # # from halting processing
        # trap { }
        #
        # # Retrieve the newest error on the stack prior to doing work:
        # $refLastKnownError = Get-ReferenceToLastError
        #
        # # Store current error preference; we will restore it after we do some
        # # work:
        # $actionPreferenceFormerErrorPreference = $global:ErrorActionPreference
        #
        # # Set ErrorActionPreference to SilentlyContinue; this will suppress
        # # error output. Terminating errors will not output anything, kick to
        # # the empty trap statement and then continue on. Likewise, non-
        # # terminating errors will also not output anything, but they do not
        # # kick to the trap statement; they simply continue on.
        # $global:ErrorActionPreference = [System.Management.Automation.ActionPreference]::SilentlyContinue
        #
        # # Do something that might trigger an error
        # Get-Item -Path 'C:\MayNotExist.txt'
        #
        # # Restore the former error preference
        # $global:ErrorActionPreference = $actionPreferenceFormerErrorPreference
        #
        # # Retrieve the newest error on the error stack
        # $refNewestCurrentError = Get-ReferenceToLastError
        #
        # $boolErrorOccurred = $false
        # if (($null -ne $refLastKnownError.Value) -and ($null -ne $refNewestCurrentError.Value)) {
        #     # Both not $null
        #     if (($refLastKnownError.Value) -ne ($refNewestCurrentError.Value)) {
        #         $boolErrorOccurred = $true
        #     }
        # } else {
        #     # One is $null, or both are $null
        #     # NOTE: $refLastKnownError could be non-null, while
        #     # $refNewestCurrentError could be null if $error was cleared;
        #     # this does not indicate an error.
        #     # So:
        #     # If both are null, no error
        #     # If $refLastKnownError is null and $refNewestCurrentError is
        #     # non-null, error
        #     # If $refLastKnownError is non-null and $refNewestCurrentError is
        #     # null, no error
        #     if (($null -eq $refLastKnownError.Value) -and ($null -ne $refNewestCurrentError.Value)) {
        #         $boolErrorOccurred = $true
        #     }
        # }
        #
        # .INPUTS
        # None. You can't pipe objects to Get-ReferenceToLastError.
        #
        # .OUTPUTS
        # System.Management.Automation.PSReference ([ref]).
        # Get-ReferenceToLastError returns a reference (memory pointer) to the
        # last error that occurred. It returns a reference to $null
        # ([ref]$null) if there are no errors on on the $error stack.
        #
        # .NOTES
        # Version: 2.0.20241223.0

        #region License ####################################################
        # Copyright (c) 2024 Frank Lesniak
        #
        # Permission is hereby granted, free of charge, to any person obtaining
        # a copy of this software and associated documentation files (the
        # "Software"), to deal in the Software without restriction, including
        # without limitation the rights to use, copy, modify, merge, publish,
        # distribute, sublicense, and/or sell copies of the Software, and to
        # permit persons to whom the Software is furnished to do so, subject to
        # the following conditions:
        #
        # The above copyright notice and this permission notice shall be
        # included in all copies or substantial portions of the Software.
        #
        # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
        # EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
        # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
        # NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
        # BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
        # ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
        # CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
        # SOFTWARE.
        #endregion License ####################################################

        if ($Error.Count -gt 0) {
            return ([ref]($Error[0]))
        } else {
            return ([ref]$null)
        }
    }

    function Test-ErrorOccurred {
        # .SYNOPSIS
        # Checks to see if an error occurred during a time period, i.e., during
        # the execution of a command.
        #
        # .DESCRIPTION
        # Using two references (memory pointers) to errors, this function
        # checks to see if an error occurred based on differences between the
        # two errors.
        #
        # To use this function, you must first retrieve a reference to the last
        # error that occurred prior to the command you are about to run. Then,
        # run the command. After the command completes, retrieve a reference to
        # the last error that occurred. Pass these two references to this
        # function to determine if an error occurred.
        #
        # .PARAMETER ReferenceToEarlierError
        # This parameter is required; it is a reference (memory pointer) to a
        # System.Management.Automation.ErrorRecord that represents the newest
        # error on the stack earlier in time, i.e., prior to running the
        # command for which you wish to determine whether an error occurred.
        #
        # If no error was on the stack at this time, ReferenceToEarlierError
        # must be a reference to $null ([ref]$null).
        #
        # .PARAMETER ReferenceToLaterError
        # This parameter is required; it is a reference (memory pointer) to a
        # System.Management.Automation.ErrorRecord that represents the newest
        # error on the stack later in time, i.e., after to running the command
        # for which you wish to determine whether an error occurred.
        #
        # If no error was on the stack at this time, ReferenceToLaterError
        # must be a reference to $null ([ref]$null).
        #
        # .EXAMPLE
        # # Intentionally empty trap statement to prevent terminating errors
        # # from halting processing
        # trap { }
        #
        # # Retrieve the newest error on the stack prior to doing work
        # if ($Error.Count -gt 0) {
        #     $refLastKnownError = ([ref]($Error[0]))
        # } else {
        #     $refLastKnownError = ([ref]$null)
        # }
        #
        # # Store current error preference; we will restore it after we do some
        # # work:
        # $actionPreferenceFormerErrorPreference = $global:ErrorActionPreference
        #
        # # Set ErrorActionPreference to SilentlyContinue; this will suppress
        # # error output. Terminating errors will not output anything, kick to
        # # the empty trap statement and then continue on. Likewise, non-
        # # terminating errors will also not output anything, but they do not
        # # kick to the trap statement; they simply continue on.
        # $global:ErrorActionPreference = [System.Management.Automation.ActionPreference]::SilentlyContinue
        #
        # # Do something that might trigger an error
        # Get-Item -Path 'C:\MayNotExist.txt'
        #
        # # Restore the former error preference
        # $global:ErrorActionPreference = $actionPreferenceFormerErrorPreference
        #
        # # Retrieve the newest error on the error stack
        # if ($Error.Count -gt 0) {
        #     $refNewestCurrentError = ([ref]($Error[0]))
        # } else {
        #     $refNewestCurrentError = ([ref]$null)
        # }
        #
        # if (Test-ErrorOccurred -ReferenceToEarlierError $refLastKnownError -ReferenceToLaterError $refNewestCurrentError) {
        #     # Error occurred
        # } else {
        #     # No error occurred
        # }
        #
        # .INPUTS
        # None. You can't pipe objects to Test-ErrorOccurred.
        #
        # .OUTPUTS
        # System.Boolean. Test-ErrorOccurred returns a boolean value indicating
        # whether an error occurred during the time period in question. $true
        # indicates an error occurred; $false indicates no error occurred.
        #
        # .NOTES
        # This function also supports the use of positional parameters instead
        # of named parameters. If positional parameters are used intead of
        # named parameters, then two positional parameters are required:
        #
        # The first positional parameter is a reference (memory pointer) to a
        # System.Management.Automation.ErrorRecord that represents the newest
        # error on the stack earlier in time, i.e., prior to running the
        # command for which you wish to determine whether an error occurred. If
        # no error was on the stack at this time, the first positional
        # parameter must be a reference to $null ([ref]$null).
        #
        # The second positional parameter is a reference (memory pointer) to a
        # System.Management.Automation.ErrorRecord that represents the newest
        # error on the stack later in time, i.e., after to running the command
        # for which you wish to determine whether an error occurred. If no
        # error was on the stack at this time, ReferenceToLaterError must be
        # a reference to $null ([ref]$null).
        #
        # Version: 2.0.20241223.0

        #region License ####################################################
        # Copyright (c) 2024 Frank Lesniak
        #
        # Permission is hereby granted, free of charge, to any person obtaining
        # a copy of this software and associated documentation files (the
        # "Software"), to deal in the Software without restriction, including
        # without limitation the rights to use, copy, modify, merge, publish,
        # distribute, sublicense, and/or sell copies of the Software, and to
        # permit persons to whom the Software is furnished to do so, subject to
        # the following conditions:
        #
        # The above copyright notice and this permission notice shall be
        # included in all copies or substantial portions of the Software.
        #
        # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
        # EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
        # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
        # NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
        # BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
        # ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
        # CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
        # SOFTWARE.
        #endregion License ####################################################
        param (
            [ref]$ReferenceToEarlierError = ([ref]$null),
            [ref]$ReferenceToLaterError = ([ref]$null)
        )

        # TODO: Validate input

        $boolErrorOccurred = $false
        if (($null -ne $ReferenceToEarlierError.Value) -and ($null -ne $ReferenceToLaterError.Value)) {
            # Both not $null
            if (($ReferenceToEarlierError.Value) -ne ($ReferenceToLaterError.Value)) {
                $boolErrorOccurred = $true
            }
        } else {
            # One is $null, or both are $null
            # NOTE: $ReferenceToEarlierError could be non-null, while
            # $ReferenceToLaterError could be null if $error was cleared; this
            # does not indicate an error.
            # So:
            # - If both are null, no error
            # - If $ReferenceToEarlierError is null and $ReferenceToLaterError
            #   is non-null, error
            # - If $ReferenceToEarlierError is non-null and
            #   $ReferenceToLaterError is null, no error
            if (($null -eq $ReferenceToEarlierError.Value) -and ($null -ne $ReferenceToLaterError.Value)) {
                $boolErrorOccurred = $true
            }
        }

        return $boolErrorOccurred
    }
    #endregion FunctionsToSupportErrorHandling ################################

    trap {
        # Intentionally left empty to prevent terminating errors from halting
        # processing
    }

    # TODO: Validate input

    # Retrieve the newest error on the stack prior to doing work
    $refLastKnownError = Get-ReferenceToLastError

    # Store current error preference; we will restore it after we do the work of
    # this function
    $actionPreferenceFormerErrorPreference = $global:ErrorActionPreference

    # Set ErrorActionPreference to SilentlyContinue; this will suppress error
    # output. Terminating errors will not output anything, kick to the empty trap
    # statement and then continue on. Likewise, non-terminating errors will also
    # not output anything, but they do not kick to the trap statement; they simply
    # continue on.
    $global:ErrorActionPreference = [System.Management.Automation.ActionPreference]::SilentlyContinue

    # Export the types from the System.Reflection.RuntimeAssembly object
    $ReferenceToArrayOfExportedTypes.Value = @(($ReferenceToSystemReflectionRuntimeAssembly.Value).GetExportedTypes())

    # Restore the former error preference
    $global:ErrorActionPreference = $actionPreferenceFormerErrorPreference

    # Retrieve the newest error on the error stack
    $refNewestCurrentError = Get-ReferenceToLastError

    if (Test-ErrorOccurred -ReferenceToEarlierError $refLastKnownError -ReferenceToLaterError $refNewestCurrentError) {
        # Error occurred; return failure indicator:
        return $false
    } else {
        # No error occurred; return success indicator:
        return $true
    }
}