Hot to set 10000 params via MQTT

[pigeonvictor]

Hello,

Il I want to set the param 720 with MQTT, I can do "BSB-LAN/0/11/720/set"
But what about the 10000 param ? What the MQTT path ?

Thant you !

[fredlcore]

Replace the /11/ with the number of the category of the user defined parameters and you should be good to go...

[pigeonvictor]

So I should do "BSB-LAN/10000/10000/set" ? I'm not sure I understand

[fredlcore]

No, 10000 is not the category number. Have a look how the URL looks like if you click on the user-defined category. That number that follows the "/K" is what matters here.

[fredlcore]

If you read the manual, you would find this:

Otherwise, if you want to set up your own connection details, the topic structure of BSB-LAN is as follows:
<BSB-LAN MQTT Topic>/<device ID>/<category no.>/<parameter no.>
whereas

    <BSB-LAN MQTT Topic> is defined in BSB-LAN's settings (defaults to BSB-LAN),
    <device ID> is the ID of the heating controller (usually 0 for the main controller),
    <category no.> is the category number as it is used with URL-command /K,
    <parameter no.> is the parameter number, such as 501.1.

[pigeonvictor]

Ok my bad I get it now, I should use BSB-LAN/0/36/10000/set

I also managed to make it work with BSB-LAN/0/10000/10000/set. Is it normal ?

Also thank you for your work, this project is awesome !

[fredlcore]

So far, we're not using the category number, so you can indeed choose it randomly, if you want, but if you want to remain compatible for the future, you better use the category number that the system uses.