platformarduino.cpp

#include "platformarduino.h"
#include "programtab.h"

#include <QDir>
#include <QFileInfo>
#include <QProcess>

PlatformArduino::PlatformArduino() : Platform(QString("Arduino"))
{
	setReferenceUrl(QUrl(QString("http://arduino.cc/en/Reference/")));
	setIdeName("Arduino CLI");
	setDownloadUrl(QUrl("https://github.com/arduino/arduino-cli"));
	setMinVersion("1.0.0");
	setCanProgram(true);
	setExtensions(QStringList() << ".ino" << ".pde");

	QMap<QString, QString> boards;
	// https://github.com/arduino/Arduino/blob/master/hardware/arduino/avr/boards.txt
	boards.insert("Arduino UNO", "arduino:avr:uno");
	boards.insert("Arduino Yún", "arduino:avr:yun");
	boards.insert("Arduino Mega/2560", "arduino:avr:mega");
	boards.insert("Arduino Duemilanove/Diecemila", "arduino:avr:diecimila");
	boards.insert("Arduino Nano", "arduino:avr:nano");
	boards.insert("Arduino Mega ADK", "arduino:avr:megaADK");
	boards.insert("Arduino Leonardo", "arduino:avr:leonardo");
	boards.insert("Arduino Micro", "arduino:avr:micro");
	boards.insert("Arduino Esplora", "arduino:avr:Esplora");
	boards.insert("Arduino Mini", "arduino:avr:mini");
	boards.insert("Arduino Ethernet", "arduino:avr:ethernet");
	boards.insert("Arduino Fio", "arduino:avr:fio");
	boards.insert("Arduino BT", "arduino:avr:bt");
	boards.insert("Lilypad Arduino USB", "arduino:avr:LilyPadUSB");
	boards.insert("LilyPad Arduino ", "arduino:avr:lilypad");
	boards.insert("Arduino Pro/Pro Mini", "arduino:avr:pro");
	boards.insert("Arduino NG or older", "arduino:avr:atmegang");
	boards.insert("Arduino Robot Control", "arduino:avr:robotControl");
	boards.insert("Arduino Robot Motor", "arduino:avr:robotMotor");
	boards.insert("Arduino Gemma", "arduino:avr:gemma");
	// https://github.com/arduino/Arduino/blob/master/hardware/arduino/sam/boards.txt
	boards.insert("Arduino Due (Programming Port)", "arduino:sam:arduino_due_x_dbg");
	boards.insert("Arduino Due (Native USB Port)", "arduino:sam:arduino_due_x");
	// Note: Edison, Galileo, 101 are programmed via Arduino IDE Add-ons,
	//       not sure if the command line is supported for them
	setBoards(boards);

	setDefaultBoardName("Arduino UNO");
}

void PlatformArduino::upload(QWidget *source, const QString &port, const QString &board, const QString &fileLocation)
{
	auto * process = new QProcess(this);
	process->setProcessChannelMode(QProcess::MergedChannels);
	process->setReadChannel(QProcess::StandardOutput);
	connect(process, SIGNAL(finished(int, QProcess::ExitStatus)), source, SLOT(programProcessFinished(int, QProcess::ExitStatus)));
	connect(process, SIGNAL(readyReadStandardOutput()), source, SLOT(programProcessReadyRead()));

	// Make sure .ino is in its own folder with same name (as required by Arduino compiler),
	// otherwise create a subfolder and copy the file there.
	QFileInfo fileInfo(fileLocation);
	QString tmpFilePath = fileInfo.absoluteFilePath();
	QString dirName = fileInfo.dir().dirName();
	QString sketchName = fileInfo.baseName();
	if (dirName.compare(sketchName, Qt::CaseInsensitive) != 0) {
		QString tmpSketchName(sketchName.append("_TMP"));
		fileInfo.dir().mkdir(tmpSketchName);
		tmpFilePath = fileInfo.absolutePath().append("/").append(tmpSketchName).append("/")
		              .append(fileInfo.baseName().append("_TMP.").append(fileInfo.suffix()));
		if (QFile::exists(tmpFilePath)) QFile::remove(tmpFilePath);
		QFile::copy(fileInfo.absoluteFilePath(), tmpFilePath);
	}

	QStringList args;
	if (!usingArduinoCLI()) {
		// see https://github.com/arduino/Arduino/blob/ide-1.5.x/build/shared/manpage.adoc
		//args.append(QString("--verbose"));
		args.append(QString("--board"));
	}else {
		// see https://github.com/arduino/arduino-cli
		//args.append(QString("--verbose"));
		args.append(QString("compile"));
		args.append(QString("-b"));
	}
	args.append(getBoards().value(board));
	args.append(QString("--port"));
	args.append(port);
	args.append(QString("--upload"));
	args.append(QDir::toNativeSeparators(tmpFilePath));

	auto *tab = qobject_cast<ProgramTab *>(source);
	if (tab != nullptr)
		tab->appendToConsole(tr("Running %1 %2").arg(getCommandLocation()).arg(args.join(" ")));
	process->start(getCommandLocation(), args);

}

bool PlatformArduino::usingArduinoCLI() {
	//We make an error and analize if we are using the arduino-cli or not
	auto * process = new QProcess(this);
	QStringList args;
	args.append(QString("--board"));
	args.append(QString(" sssssss"));

	process->start(getCommandLocation(), args);
	process->waitForFinished(500);
	QString version = process->readAllStandardError();

	return version.contains("arduino-cli");
}