ELUT column names not fixed

[samaloney]

The ELUT column names are different in different files

STIX-CONF/elut/elut_table_20240205.csv

Lines 3 to 4 in a213fbe

Offset,Gain keV/ADC,Pixel,Detector,ADC Edge 0 - 4.00 keV,ADC Edge 1 - 5.00 keV,ADC Edge 2 - 6.00 keV,ADC Edge 3 - 7.00 keV,ADC Edge 4 - 8.00 keV,ADC Edge 5 - 9.00 keV,ADC Edge 6 - 10.00 keV,ADC Edge 7 - 11.00 keV,ADC Edge 8 - 12.00 keV,ADC Edge 9 - 13.00 keV,ADC Edge 10 - 14.00 keV,ADC Edge 11 - 15.00 keV,ADC Edge 12 - 16.00 keV,ADC Edge 13 - 18.00 keV,ADC Edge 14 - 20.00 keV,ADC Edge 15 - 22.00 keV,ADC Edge 16 - 25.00 keV,ADC Edge 17 - 28.00 keV,ADC Edge 18 - 32.00 keV,ADC Edge 19 - 36.00 keV,ADC Edge 20 - 40.00 keV,ADC Edge 21 - 45.00 keV,ADC Edge 22 - 50.00 keV,ADC Edge 23 - 56.00 keV,ADC Edge 24 - 63.00 keV,ADC Edge 25 - 70.00 keV,ADC Edge 26 - 76.00 keV,ADC Edge 27 - 84.00 keV,ADC Edge 28 - 100.00 keV,ADC Edge 29 - 120.00 keV,ADC Edge 30 - 150.00 keV

897.7778, 0.110547,0,0,934,943,952,961,970,979,988,997,1006,1015,1024,1033,1043,1061,1079,1097,1124,1151,1187,1223,1260,1305,1350,1404,1468,1531,1585,1658,1802,1983,2255

vs

STIX-CONF/elut/elut_table_20240709.csv

Lines 2 to 3 in a213fbe

Channel energy edges obtained from elut_creator.py,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Offset (ADC),Gain (ADC/keV),Pixel,Detector,ADC Edge #0 - 4 keV,ADC Edge #1 - 5 keV,ADC Edge #2 - 6 keV,ADC Edge #3 - 7 keV,ADC Edge #4 - 8 keV,ADC Edge #5 - 9 keV,ADC Edge #6 - 10 keV,ADC Edge #7 - 11 keV,ADC Edge #8 - 12 keV,ADC Edge #9 - 13 keV,ADC Edge #10 - 14 keV,ADC Edge #11 - 15 keV,ADC Edge #12 - 16 keV,ADC Edge #13 - 18 keV,ADC Edge #14 - 20 keV,ADC Edge #15 - 22 keV,ADC Edge #16 - 25 keV,ADC Edge #17 - 28 keV,ADC Edge #18 - 32 keV,ADC Edge #19 - 36 keV,ADC Edge #20 - 40 keV,ADC Edge #21 - 45 keV,ADC Edge #22 - 50 keV,ADC Edge #23 - 56 keV,ADC Edge #24 - 63 keV,ADC Edge #25 - 70 keV,ADC Edge #26 - 76 keV,ADC Edge #27 - 84 keV,ADC Edge #28 - 100 keV,ADC Edge #29 - 120 keV,ADC Edge #30 - 150 keV

Offset,Gain keV/ADC -> Offset (ADC),Gain (ADC/keV)

Can alter the code to find the right column but perhaps better to reformat all the files to have fixed format and naming