usb: quirks: add control message delay for 1b1c:1b20

commit cb88a05 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5b ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: [email protected]
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: Danilo Krummrich

drivers/usb/core/message.c

@@ -150,6 +150,10 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
 
 	ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
 
+	/* Linger a bit, prior to the next control message. */
+	if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+		msleep(200);
+
 	kfree(dr);
 
 	return ret;

drivers/usb/core/quirks.c

@@ -229,7 +229,8 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
 
 	/* Corsair Strafe RGB */
-	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
 
 	/* Corsair K70 LUX */
 	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },

include/linux/usb/quirks.h

@@ -57,4 +57,7 @@
  */
 #define USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL	BIT(11)
 
+/* Device needs a pause after every control message. */
+#define USB_QUIRK_DELAY_CTRL_MSG		BIT(13)
+
 #endif /* __LINUX_USB_QUIRKS_H */