diff --git a/README.md b/README.md
index f16c219..e68b1e5 100644
--- a/README.md
+++ b/README.md
@@ -1,46 +1 @@
-# Netgear-A6210
-This driver supports Ralink / Mediatek mt766u, mt7632u and mt7612u chipsets.
-
-In particular, the driver supports several USB dongles such as Netgear-A6210,
-ASUS USB-AC55, ASUS USB-N53 and EDUP EP-AC1601. 
-
-To build the driver, follow these steps:
-
-    $ git clone https://github.com/jurobystricky/Netgear-A6210
-    $ cd Netgear-A6210
-    $ make
-    $ sudo make install
-
-The driver is mostly tested on 64 bit Ubuntu 15.10 and Debian 8.3 with NETGEAR AC1200
-High Gain Wifi USB Adapter. 
-Some other distro/dongle combinations work as well, for example
-Linux Mint 17.3 "Rosa" - KDE (32-bit)/ASUS USB-N53 seems to work flawlessly
-(as reported by Roland Bauer).
-
-The supported chipsets can be present in other devices. To include additional 
-devices, you need to add corresponding VendorID, DeviceID into the file 
-"rtusb_dev_id.c"
-
-The original code was downloaded from: 
-http://cdn-cw.mediatek.com/Downloads/linux/MT7612U_DPO_LinuxSTA_3.0.0.1_20140718.tar.bz2
-
-This is work in progress. The driver is functional. However, there are still
-several issues that need to be addressed. In particular, hot-unplugging may
-cause the network manager to become unreliable. After plugging the dongle back in, 
-you may need to restart the manager:
-
-    $ sudo service network-manager restart
-
-This seems to be Linux distro dependent, but definitely observed on Ubuntu.
-
-At present, there is no LED support yet (Netgear-A6210 does not have
-any LEDs, but other dongles do).
-
-EDUP EP-AC1601 works (or to be precise, should work), but at present there are
-several problems such as frequent dropping of connection, failure to connect, wildly 
-oscillating signal strength etc. This also seems to depent on the Linux distro
-a lot.
-    
-
-    
-    
+Please use https://github.com/Netgear-A6210-linux-driver/Netgear-A6210 instead of this project, so everyone can contribute.
diff --git a/dkms.conf b/dkms.conf
new file mode 100644
index 0000000..2eaefef
--- /dev/null
+++ b/dkms.conf
@@ -0,0 +1,8 @@
+PACKAGE_NAME=Netgear-A6210
+PACKAGE_VERSION=1.0
+CLEAN="make clean"
+MAKE[0]="make -j$(nproc) && make install"
+BUILT_MODULE_NAME[0]=mt7662u_sta
+BUILT_MODULE_LOCATION[0]="./os/linux/"
+DEST_MODULE_LOCATION[0]="/kernel/updates/dkms"
+AUTOINSTALL="YES"