From 3861d31888674ede280cc094af3e723f516ca3d5 Mon Sep 17 00:00:00 2001
From: ldebritto <ldebritto@gmail.com>
Date: Wed, 15 Jan 2025 10:55:04 -0300
Subject: [PATCH] Updated do match lastest urob "mouse.dtsi" file

---
 config/mouse.dtsi | 56 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 46 insertions(+), 10 deletions(-)

diff --git a/config/mouse.dtsi b/config/mouse.dtsi
index 028152a..bb40777 100644
--- a/config/mouse.dtsi
+++ b/config/mouse.dtsi
@@ -1,23 +1,59 @@
 // This file was copied from urob's repo
 
-#define ZMK_MOUSE_DEFAULT_MOVE_VAL 1500  // 600
-#define ZMK_MOUSE_DEFAULT_SCRL_VAL 20    // 10
+// Settings tuned for 3840 x 2160 display resolution
+#define ZMK_POINTING_DEFAULT_MOVE_VAL 600 // 600
+#define ZMK_POINTING_DEFAULT_SCRL_VAL 20  // 10
 
-#include <dt-bindings/zmk/mouse.h>
+#include <dt-bindings/zmk/pointing.h>
+#include <input/processors.dtsi>
+#include <zephyr/dt-bindings/input/input-event-codes.h>
 
-// Config from @caksoylar, defaults in comments
+// Based on @caksoylar's config, defaults in comments
 &mmv {
-  acceleration-exponent = <1>;      // 1
-  time-to-max-speed-ms = <500>;     // 300
-  delay-ms = <0>;                   // 0
+  acceleration-exponent = <1>;          // 1
+  time-to-max-speed-ms = <500>;         // 300
+  delay-ms = <0>;                       // 0
 };
 
 &msc {
-  acceleration-exponent = <1>;      // 0
-  time-to-max-speed-ms = <40>;      // 300
-  delay-ms = <0>;                   // 0
+  acceleration-exponent = <0>;          // 0
+  time-to-max-speed-ms = <300>;         // 300
+  delay-ms = <0>;                       // 0
 };
 
+&mmv_input_listener {
+  warp {
+    layers = <NAV>;
+    input-processors = <&zip_xy_scaler 3 1>;
+  };
+  precision {
+    layers = <FN>;
+    input-processors = <&zip_xy_scaler 1 2>;
+  };
+};
+
+/ {
+  zip_scroll_scaler: zip_scroll_scaler {
+    compatible = "zmk,input-processor-scaler";
+    #input-processor-cells = <2>;
+    type = <INPUT_EV_REL>;
+    codes = <INPUT_REL_WHEEL INPUT_REL_HWHEEL>;
+    track-remainders;
+  };
+};
+
+&msc_input_listener {
+  warp {
+    layers = <NAV>;
+    input-processors = <&zip_scroll_scaler 2 1>;
+  };
+  precision {
+    layers = <FN>;
+    input-processors = <&zip_scroll_scaler 1 2>;
+  };
+};
+
+
 // Add these lines to cradio.conf
 // # Mouse config, requires PR #778
 // CONFIG_ZMK_MOUSE=y