boards with displays that run lvgl_micropython, recommendations?

[tedx]

I want a board that runs lvgl_micropython with an inductive display, at least 2.8in, and enough memory to use wifi, a web app and multiple sensors (at least 3). Any recommended candidates?

[kdschlosser]

what is an inductive display? I am thinking you mean a capacitive display.

There are 2 recommendations.

• ESP32-S3 with 8MB of octal SPI PSRAM and ideally either 16mb or 32mb of octal SPI flash. That's for the MCU portion. For the display you should get a display that has an I8080 connection. depending on what you want to connect to the MCU and how many pins you are going to use or or the types of sensors being connected you should be able to use a 16 lane version of the display. If you want some extra GPIO's then get an 8 lane display (harder to find).

• ESP32-P4 with as much RAM and as much flash as you can get. For this I recommend using a MIPI DSI display. You will want to get the 2 lane version of the display. a display that has 4 lanes is not going to be able to be connected to this MCU.