diff --git a/Dockerfile b/Dockerfile
index 2a4ec8d..a280c2e 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,2 +1,2 @@
-FROM archlinux
-RUN pacman -Syu --noconfirm archiso
+FROM --platform=linux/arm64/v8 archlinux
+RUN pacman -Syu --noconfirm archiso
\ No newline at end of file
diff --git a/init.sh b/init.sh
index 08b6c80..c82c3a3 100644
--- a/init.sh
+++ b/init.sh
@@ -1,100 +1,64 @@
-#!/bin/sh
+#!/bin/bash
 
-# Define a list of candidate disks to check
-candidate_disks="/dev/nvme0n1 /dev/sda /dev/vda"
-
-# Function to check if a disk is empty (no partitions)
-is_disk_empty() {
+# Check if disk is empty
+function is_disk_empty() {
   local disk="$1"
-  local partition_count
-
-  # Get the number of partitions on the disk
-  partition_count=$(parted --script "$disk" print | grep -c '^Number')
-
-  # Check if there are no partitions
-  [ "$partition_count" -eq 0 ]
-}
-
-# Function to wipe and format a disk
-wipe_and_format_disk() {
-  local disk="$1"
-
-  sgdisk --zap-all "$disk"
-  if [ "$(basename "$disk")" = "nvme0n1" ]; then
-    blkdiscard "$disk"
+  local disk_content=$(ls "$disk")
+  if [ -z "$disk_content" ]; then
+    return 0
   else
-    dd if=/dev/zero of="$disk" bs=1M count=100 oflag=direct,dsync
+    return 1
   fi
+}
 
+# Wipe and format disk
+function wipe_and_format_disk() {
+  local disk="$1"
+  wipefs --all "$disk"
   mkfs.ext4 "$disk"
 }
 
-# Iterate through the candidate disks
-for disk in $candidate_disks; do
-  # Check if the disk exists
-  if ls -lah "$disk" >/dev/null 2>&1; then
-    # Check if the disk is empty
+# List of candidate disks
+candidate_disks=(/dev/sda /dev/sdb /dev/sdc /dev/sdd)
+
+# Iterate through candidate disks
+for disk in "${candidate_disks[@]}"; do
+  # Check if disk exists
+  if [ -b "$disk" ]; then
+    # Check if disk is empty
     if is_disk_empty "$disk"; then
-      # Wipe and format the empty disk
-      echo "Disk $disk is empty. Wiping and formatting it." >> /tmp/log.txt
+      # Wipe and format disk
       wipe_and_format_disk "$disk"
-      export DISK="$disk"
-      break
-    else
-      # Use the non-empty disk as a mount
-      echo "Using non-empty disk $disk as a mount." >> /tmp/log.txt
-      export DISK="$disk"
-      break
     fi
+    # Use disk as mount
+    mount "$disk" /mnt
+    break
   fi
 done
 
-# If no suitable disk was found, use a ramdisk
-if [ -z "$DISK" ]; then
-  echo "No disk device usable. Using a ramdisk. Assuming at least 16G of memory available." >> /tmp/log.txt
-  #TODO: Use `grep MemTotal /proc/meminfo` and do either 16G or half of memory available, whichever is less.
-  modprobe zram num_devices=1
-  echo 16G > /sys/block/zram0/disksize
-  export DISK=/dev/zram0
-  mkfs.ext4 "$DISK"
-fi
-
-# Mount the disk to /mnt and /var/log
-mount "$DISK" /mnt
-mount "$DISK" /var/log/pods
-mount "$DISK" /var/log/containers
-mkdir /mnt/tmp
+# Create temporary directory
+mkdir -p /tmp/kubernetes
 
+# Export UUID and Gateway IP
+export UUID=$(blkid -s UUID -o value /dev/sda1)
+export GATEWAY_IP=192.168.1.1
 
-export UUID=$(cat /sys/class/net/$(ip route show default | awk '/default/ {print $5}')/address | sed s/://g )
+# Update hostname and hosts files
+echo "k8s-node-$(uuidgen | cut -c-5)" > /etc/hostname
+echo "127.0.0.1 localhost" > /etc/hosts
 
-#Gateway IP to get kubeadm config by default
-export GW_IP=$(ip route | awk '/default/ { print $3 }')
-curl -LO "http://$GW_IP/kubeadm.conf.yaml"
-
-cp kubeadm.conf.yaml /etc/kubeadm/kubeadm.conf.yaml
-envsubst < /etc/kubeadm/kubeadm.conf.yaml | sponge /etc/kubeadm/kubeadm.conf.yaml
-echo "mcsh-$UUID" > /etc/hostname
-echo "127.0.0.1 mcsh-$UUID" > /etc/hosts
-echo "::1 mcsh-$UUID" >> /etc/hosts
+# Load necessary modules
+modprobe overlay
+modprobe br_netfilter
 
+# Enable IP forwarding
+sysctl net.ipv4.ip_forward=1
 
-#K8s options
-modprobe br_netfilter
-#Ceph options
-modprobe ceph
-modprobe rbd
-modprobe nbd
-#Cilium ipv6 options (in nat mode)
-modprobe ip6_tables
-modprobe ip_tables
-modprobe ip6table_mangle
-modprobe ip6table_raw
-modprobe ip6table_filter
-modprobe xt_socket
+# Start crio service
+systemctl start crio
 
-echo '1' > /proc/sys/net/ipv4/ip_forward
+# Install kubeadm using pacman
+pacman -Syu kubeadm
 
-systemctl enable --now crio 
-kubeadm join --config /etc/kubeadm/kubeadm.conf.yaml --v=5
-echo "Join operation complete." >> /tmp/log.txt
+# Join Kubernetes cluster
+kubeadm join --config /etc/kubeadm/types.go
\ No newline at end of file