Replies: 9 comments 19 replies
-
Beta Was this translation helpful? Give feedback.
-
|
I have a single phase EV wall with Smappee Connect. The MQTT appears to be working even though it's not supposed to with a connect device. I tried MQTT explorer and got the following. mqtt.smappee.net / servicelocation/xxxxxxxxxxxxxxxxxxxxxxxx/homeassistant |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Version 2025.8.12 working perfectly here, fantastic addition, I can finally create an entity "1 phase / 3 phase charging" that doesn't need to guess just based on the P1 meter's phases
|
Beta Was this translation helpful? Give feedback.
-
|
I'm back from holiday. A major step forward in the new version. I like it. |
Beta Was this translation helpful? Give feedback.
-
|
2025.8.12
…-------- Original Message --------
SUBJECT:
Re: [myny-git/smappee_ev] Major change / improvement (Discussion #17)
DATE:
2025-08-25 14:21
FROM:
myny-git ***@***.***>
TO:
myny-git/smappee_ev ***@***.***>
Thanks, which version did you install? I am still looking to make a new
release from 2025.8.12b6, after a few users did some pre-testing. I can
only test my own situation ;-)
--
Reply to this email directly, view it on GitHub [1], or unsubscribe [2].
You are receiving this because you commented.Message ID:
***@***.***>
Links:
------
[1]
#17 (reply in thread)
[2]
https://github.com/notifications/unsubscribe-auth/ATUFOZGKVFTUAOGPSY3NQLD3PL5WBAVCNFSM6AAAAACEMC22OCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMRRGAYDMNA
|
Beta Was this translation helpful? Give feedback.
-
|
After install all entities were disabled. Also a reset of the
configuration doesn't work. I don't like always to delete all sensors
and install it again. All automation rules are corrupt and the energy
configuration lose all historical data... Can you have a look that the
sensors still work after upgrade?
…-------- Original Message --------
SUBJECT:
Re: [myny-git/smappee_ev] Major change / improvement (Discussion #17)
DATE:
2025-08-25 15:27
FROM:
myny-git ***@***.***>
TO:
myny-git/smappee_ev ***@***.***>
Could you maybe try this version?
2025.8.12b6
--
Reply to this email directly, view it on GitHub [1], or unsubscribe [2].
You are receiving this because you commented.Message ID:
***@***.***>
Links:
------
[1]
#17 (reply in thread)
[2]
https://github.com/notifications/unsubscribe-auth/ATUFOZGLHXDTXTJMYYAYV3T3PMFLPAVCNFSM6AAAAACEMC22OCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMRRGA3TEMY
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Just a question: is there a reason to prefer the internet-required mqtt approach over the 100% local Modbus approach? |
Beta Was this translation helpful? Give feedback.












Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
All,
I did not plan to do any major improvements, however, I discovered mqtt.smappee.net. This is an online mqtt service with nearly realtime data.
It works nicely for me on my setup, however, please let me know what does not work - or what need improvements.
Moreover, if you don't see the power/current/energy values, then, I would like you to do a curl with information shown below:
https://smappee.atlassian.net/wiki/spaces/DEVAPI/pages/916422661/Get+metering+configuration
I use this information in the integration to specify what is what.
Anyway, this would make MODBUS obsolete.
Beta Was this translation helpful? Give feedback.
All reactions