- CC3220SF single-chip wireless microcontroller
- Dual-Core Architecture:
- User-Dedicated Application MCU Subsystem
- Dedicated software controlled radio controller
- Powerful 48-MHz Arm® Cortex®-M4F processor
- Embedded Memory:
- 352kB of in-system Programmable Flash
- 256KB of ROM for protocols and library functions
- 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
- 80KB of ultra-low leakage SRAM
- Peripherals:
- Digital peripherals can be routed to any GPIO
- 4× 32-bit or 8× 16-bit general-purpose timers
- 12-Bit ADC, 200 kSamples/s, 8 channels
- 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
- Programmable current source
- 2× UART
- 2× SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES 128- and 256-bit Crypto Accelerator
- ECC and RSA Public Key Hardware Accelerator
- SHA2 Accelerator (Full suite up to SHA-512)
- True Random Number Generator (TRNG)
- Capacitive sensing, up to 8 channels
- Integrated temperature and battery monitor
- Radio section
- Multi-band sub-1 GHz and 2.4 GHz RF transceiver compatible with Bluetooth 5 Low Energy and IEEE 802.15.4 PHY and MAC
- Excellent receiver sensitivity:
- –121 dBm for SimpleLink long-range mode
- –110 dBm at 50 kbps, –105 dBm for Bluetooth 125-kbps (LE Coded PHY)
- Output power up to +14 dBm (Sub-1 GHz) and +5 dBm (2.4 GHz) with temperature compensation
- Suitable for systems targeting compliance with worldwide radio frequency regulations
- ETSI EN 300 220 Receiver Category 1.5 and 2, EN 300 328, EN 303 131, EN 303 204 (Europe)
- EN 300 440 Category 2
- FCC CFR47 Part 15
- ARIB STD-T108 and STD-T66
- Wide standard support
- Wireless protocols
- Thread
- Zigbee®
- Bluetooth® 5 Low Energy
- IEEE 802.15.4g
- IPv6-enabled smart objects (6LoWPAN),
- Wireless M-Bus
- Wi-SUN®
- KNX RF
- proprietary systems
- SimpleLink™ TI 15.4-Stack (Sub-1 GHz)
- Dynamic Multiprotocol Manager (DMM)
- LaunchPad with 2.4GHz and Sub-1GHz radio for wireless applications with integrated PCB trace antenna
- Broad band antenna supports both 868 MHz ISM band for Europe and 915 MHz ISM band for US with a single board
- On-board emulator gets you started with instant code development in CCS Cloud
- Can be used with both LaunchPad kit and SmartRF™ Studio applications
- Access all I/O signals with the BoosterPack plug-in module connectors
- Compatible with LCD BoosterPack
The ready to use firmware images provided include support for the class libraries and features marked bellow.
| Gpio | Spi | I2c | Pwm | Adc | Serial | Events | SWO | Networking | Large Heap |
|---|---|---|---|---|---|---|---|---|---|
| ✔️ |
| Target | Firmware |
|---|---|
| CC1352R1_LAUNCHXL (868MHz) | |
| CC1352R1_LAUNCHXL (915MHz) |