Frequency with 10Hz resolution rather than 100Hz?

[bob04609]

The FT-8x7 series is capable of setting and reading frequencies with 10Hz resolution. I looks like the frequency is passed and read back with only 100Hz resolution(?), at least that's what I see when I print out the value of "freq" to an attached OLED display. If this is the case (and I'm not misinterpreting what I see) would it be possible to add an option, or modify the library, so that frequency is passed and read with 10Hz resolution.? I have looked at the library, but I have not yet figured out exactly what's happening and what might be changed to allow 10 Hz resolution.

If I set the initial value of "freq" with 10Hz resolution in the test program and read it back using my routine for the OLED display before any CAT commands are sent, I see the 10Hz resolution value, so I'm assuming it's the CAT library that's rounding things off (or truncating) to 100Hz.

Thanks in advance for any help with this.