main.yaml

---
substitutions:
  node_name: climate-indoor
  pin_led_status: GPIO21
  pin_i2c: GPIO18
  pin_uart_rx: GPIO17
  pin_uart_tx: GPIO16
  board: 'nodemcu-32s'
  platform: 'ESP32'
  log_level: VERY_VERBOSE

packages:
  device_base: !include ../common/device_base.yaml

# PMSX003
uart:
  rx_pin: ${pin_uart_rx}
  tx_pin: ${pin_uart_tx}
  baud_rate: 9600

# as3935_i2c:
#   irq_pin: ${pin_i2c}

i2c:

# see https://esphome.io/components/sensor/bme680_bsec.html
bme680_bsec:
  address: 0x76
  temperature_offset: ${bme680_temperature_offset}
  iaq_mode: static
  sample_rate: ${bosch_sample_rate}
  state_save_interval: 2h

# dallas:
#   - pin: GPIO13

# binary_sensor:
#   - <<: !include ../common/binary_sensor/as3935.yaml

text_sensor:
  - <<: !include ../common/text_sensor/bme680.yaml

sensor:
  - <<: !include ../common/sensor/bme680.yaml
  - <<: !include ../common/sensor/pmsx003.yaml
  # - <<: !include ../common/sensor/as3935.yaml
  # - <<: !include ../common/sensor/aqi.yaml
# script:
#   - <<: !include ../common/script/aqi.yaml