feat(wl3): add STM32WL3x support

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

README.md

@@ -58,7 +58,7 @@ enable an I2C peripheral in low power mode. See board documentation for low powe
 > * The board will restart when exit shutdown mode.
 
 > [!Important]
-> For STM32WB0x:
+> For STM32WB0x and STM32WL3x:
 > * board will restart when exit shutdown mode and deep sleep.
 > * Shutdown wakeup only with reset pin.
 > * Wakeup from UART not supported.

src/STM32LowPower.cpp

@@ -68,7 +68,11 @@ void STM32LowPower::idle(uint32_t ms)
   if ((ms != 0) || _rtc_wakeup) {
     programRtcWakeUp(ms, IDLE_MODE);
   }
+#if defined(PWR_MAINREGULATOR_ON)
   LowPower_sleep(PWR_MAINREGULATOR_ON);
+#else
+  LowPower_sleep(0);
+#endif
 }
 
 /**
@@ -84,8 +88,10 @@ void STM32LowPower::sleep(uint32_t ms)
   }
 #if defined(PWR_LOWPOWERREGULATOR_ON)
   LowPower_sleep(PWR_LOWPOWERREGULATOR_ON);
-#else
+#elif defined(PWR_MAINREGULATOR_ON)
   LowPower_sleep(PWR_MAINREGULATOR_ON);
+#else
+  LowPower_sleep(0);
 #endif
 
 }
@@ -110,7 +116,7 @@ void STM32LowPower::deepSleep(uint32_t ms)
   * @param  ms: optional delay before leave the shutdown mode (default: 0).
   * @retval None
   */
-#if defined(STM32WB0x)
+#if defined(STM32WB0x) || defined(STM32WL3x)
 void STM32LowPower::shutdown(void)
 {
   LowPower_shutdown(false);
@@ -144,9 +150,9 @@ void STM32LowPower::attachInterruptWakeup(uint32_t pin, voidFuncPtrVoid callback
   attachInterrupt(pin, callback, mode);
 
   if ((LowPowerMode == SHUTDOWN_MODE)
-#if defined(PWR_WAKEUP_PA0)
+#if defined(PWR_WAKEUP_PA0) || defined(PWR_WAKEUP_PORTA)
       || (LowPowerMode == DEEP_SLEEP_MODE)
-#endif /* PWR_WAKEUP1_SOURCE_SELECTION_0 */
+#endif /* PWR_WAKEUP1_SOURCE_SELECTION_0 || PWR_WAKEUP_PORTA */
      ) {
     // If Gpio is a Wake up pin activate it for shutdown (standby or shutdown stm32)
     LowPower_EnableWakeUpPin(pin, mode);
@@ -204,7 +210,7 @@ void STM32LowPower::programRtcWakeUp(uint32_t ms, LP_Mode lp_mode)
       break;
     // LSI or LSE must be selected as clock source to wakeup the device.
     case DEEP_SLEEP_MODE:
-#if defined(RCC_RTC_WDG_BLEWKUP_CLKSOURCE_HSI64M_DIV2048)
+#if defined(RCC_RTC_WDG_BLEWKUP_CLKSOURCE_HSI64M_DIV2048) || defined(RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512)
       clkSrc = (clkSrc == STM32RTC::HSI_CLOCK) ? STM32RTC::LSI_CLOCK : clkSrc;
 #else
       clkSrc = (clkSrc == STM32RTC::HSE_CLOCK) ? STM32RTC::LSI_CLOCK : clkSrc;

src/STM32LowPower.h

@@ -80,7 +80,7 @@ class STM32LowPower {
     {
       deepSleep((uint32_t)ms);
     }
-#if defined(STM32WB0x)
+#if defined(STM32WB0x)  || defined(STM32WL3x)
     void shutdown(void);
 #else
     void shutdown(uint32_t ms = 0);

src/low_power.c

@@ -388,6 +388,72 @@ void LowPower_EnableWakeUpPin(uint32_t pin, uint32_t mode)
       HAL_PWR_EnableWakeUpPin(wkup_pin, ((mode == RISING) || (mode == HIGH)) ? PWR_WUP_FALLEDG : PWR_WUP_RISIEDG);
     }
   }
+#elif defined(PWR_WAKEUP_PORTA)
+  /* Get GPIO port from pinname*/
+  GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(p));
+  uint32_t wkup_pin = 0;
+  uint32_t wkup_port = 0;
+  switch (STM_PIN(p)) {
+    case 0:
+      wkup_pin = PWR_WAKEUP_PIN0;
+      break;
+    case 1:
+      wkup_pin = PWR_WAKEUP_PIN1;
+      break;
+    case 2:
+      wkup_pin = PWR_WAKEUP_PIN2;
+      break;
+    case 3:
+      wkup_pin = PWR_WAKEUP_PIN3;
+      break;
+    case 4:
+      wkup_pin = PWR_WAKEUP_PIN4;
+      break;
+    case 5:
+      wkup_pin = PWR_WAKEUP_PIN5;
+      break;
+    case 6:
+      wkup_pin = PWR_WAKEUP_PIN6;
+      break;
+    case 7:
+      wkup_pin = PWR_WAKEUP_PIN7;
+      break;
+    case 8:
+      wkup_pin = PWR_WAKEUP_PIN8;
+      break;
+    case 9:
+      wkup_pin = PWR_WAKEUP_PIN9;
+      break;
+    case 10:
+      wkup_pin = PWR_WAKEUP_PIN10;
+      break;
+    case 11:
+      wkup_pin = PWR_WAKEUP_PIN11;
+      break;
+    case 12:
+      wkup_pin = PWR_WAKEUP_PIN12;
+      break;
+    case 13:
+      wkup_pin = PWR_WAKEUP_PIN13;
+      break;
+    case 14:
+      wkup_pin = PWR_WAKEUP_PIN14;
+      break;
+    case 15:
+      wkup_pin = PWR_WAKEUP_PIN15;
+      break;
+    default:
+      port = NULL;
+      break;
+  }
+  if (port == (GPIO_TypeDef *)GPIOA_BASE) {
+    wkup_port = PWR_WAKEUP_PORTA;
+  } else if (port == (GPIO_TypeDef *)GPIOB_BASE) {
+    wkup_port = PWR_WAKEUP_PORTB;
+  }
+  if (IS_PWR_WAKEUP_SOURCE(wkup_pin)) {
+    HAL_PWR_EnableWakeUpPin(wkup_port, wkup_pin, ((mode == RISING) || (mode == HIGH)) ? PWR_WUP_FALLEDG : PWR_WUP_RISIEDG);
+  }
 #else
 #if !defined(PWR_WAKEUP_PIN1_HIGH)
   UNUSED(mode);
@@ -701,7 +767,7 @@ void LowPower_stop(serial_t *obj)
     HAL_UARTEx_EnableStopMode(WakeUpUart);
   }
 #endif
-#if defined(STM32WB0x)
+#if defined(STM32WB0x) || defined(STM32WL3x)
   __HAL_PWR_CLEAR_FLAG(PWR_FLAG_DEEPSTOPF);
   __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);
   PWR_DEEPSTOPTypeDef configDEEPSTOP;
@@ -812,7 +878,7 @@ void LowPower_stop(serial_t *obj)
   */
 void LowPower_standby()
 {
-#if !defined(STM32WB0x)
+#if !defined(STM32WB0x) && !defined(STM32WL3x)
   __disable_irq();
 
   /* Clear wakeup flags */
@@ -844,7 +910,7 @@ void LowPower_standby()
   LL_C2_PWR_SetPowerMode(LL_PWR_MODE_STANDBY);
 #endif
   HAL_PWR_EnterSTANDBYMode();
-#endif /* !STM32WB0x */
+#endif /* !STM32WB0x || STM32WL3x */
 }
 
 /**