alacritty.linux.yml

# Configuration for Alacritty, the GPU enhanced terminal emulator.

# Any items in the `env` entry below will be added as
# environment variables. Some entries may override variables
# set by alacritty itself.
env:
  # TERM variable
  #
  # This value is used to set the `$TERM` environment variable for
  # each instance of Alacritty. If it is not present, alacritty will
  # check the local terminfo database and use `alacritty` if it is
  # available, otherwise `xterm-256color` is used.
  TERM: xterm-256color

#window:
  # Window dimensions (changes require restart)
  #
  # Specified in number of columns/lines, not pixels.
  # If both are `0`, this setting is ignored.
  #dimensions:
  #  columns: 0
  #  lines: 0

  # Window position (changes require restart)
  #
  # Specified in number of pixels.
  # If the position is not set, the window manager will handle the placement.
  #position:
  #  x: 0
  #  y: 0

  # Window padding (changes require restart)
  #
  # Blank space added around the window in pixels. This padding is scaled
  # by DPI and the specified value is always added at both opposing sides.
  #padding:
  #  x: 0
  #  y: 0

  # Spread additional padding evenly around the terminal content.
  #dynamic_padding: false

  # Window decorations
  #
  # Values for `decorations`:
  #     - full: Borders and title bar
  #     - none: Neither borders nor title bar
  #
  # Values for `decorations` (macOS only):
  #     - transparent: Title bar, transparent background and title bar buttons
  #     - buttonless: Title bar, transparent background, but no title bar buttons
  decorations: full

  # Startup Mode (changes require restart)
  #
  # Values for `startup_mode`:
  #   - Windowed
  #   - Maximized
  #   - Fullscreen
  #
  # Values for `startup_mode` (macOS only):
  #   - SimpleFullscreen
  startup_mode: Fullscreen

  # Window title
  #title: Alacritty

  # Window class (Linux/BSD only):
  #class:
    # Application instance name
    #instance: Alacritty
    # General application class
    #general: Alacritty

  # GTK theme variant (Linux/BSD only)
  #
  # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`.
  # Set this to `None` to use the default theme variant.
  #gtk_theme_variant: None

#scrolling:
  # Maximum number of lines in the scrollback buffer.
  # Specifying '0' will disable scrolling.
  #history: 10000

  # Number of lines the viewport will move for every line scrolled when
  # scrollback is enabled (history > 0).
  #multiplier: 3

  # Scroll to the bottom when new text is written to the terminal.
  #auto_scroll: false

# Spaces per Tab (changes require restart)
#
# This setting defines the width of a tab in cells.
#
# Some applications, like Emacs, rely on knowing about the width of a tab.
# To prevent unexpected behavior in these applications, it's also required to
# change the `it` value in terminfo when altering this setting.
#tabspaces: 8

# Font configuration
font:
  # Normal (roman) font face
  #normal:
    # Font family
    #
    # Default:
    #   - (macOS) Menlo
    #   - (Linux/BSD) monospace
    #   - (Windows) Consolas
    #family: 'Fira Code'
  normal:
    family: 'OperatorMono Nerd Font'
    #family: 'Jet Brains Mono Nerd Font'
    #family: 'FiraCode'

    # The `style` can be specified to pick a specific face.
    style: 'Book'

  # Bold font face
  #bold:
    # Font family
    #
    # If the bold family is not specified, it will fall back to the
    # value specified for the normal font.
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: 'Medium'

  # Italic font face
  #italic:
    # Font family
    #
    # If the italic family is not specified, it will fall back to the
    # value specified for the normal font.
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: 'Medium Italic'

  # Bold italic font face
  #bold_italic:
    # Font family
    #
    # If the bold italic family is not specified, it will fall back to the
    # value specified for the normal font.
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: 'Medium Italic'

  # Point size
  size: 10

  # Offset is the extra space around each character. `offset.y` can be thought of
  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
  offset:
    x: 0
    y: 3

  # Glyph offset determines the locations of the glyphs within their cells with
  # the default being at the bottom. Increasing `x` moves the glyph to the right,
  # increasing `y` moves the glyph upwards.
  #glyph_offset:
  #  x: 0
  #  y: 0

  # Thin stroke font rendering (macOS only)
  #
  # Thin strokes are suitable for retina displays, but for non-retina screens
  # it is recommended to set `use_thin_strokes` to `false`
  #
  # macOS >= 10.14.x:
  #
  # If the font quality on non-retina display looks bad then set
  # `use_thin_strokes` to `true` and enable font smoothing by running the
  # following command:
  #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
  #
  # This is a global setting and will require a log out or restart to take
  # effect.
  #use_thin_strokes: true

    #colors:
    #  # Default colors
    #  primary:
    #    background: '0x1d1d2b'
    #    foreground: '0xddddf0'
    #    # Bright and dim foreground colors
    #    #
    #    # The dimmed foreground color is calculated automatically if it is not present.
    #    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
    #    # is `false`, the normal foreground color will be used.
    #    #dim_foreground: '0x9a9a9a'
    #    #bright_foreground: '0xffffff'
    #
    #  # Cursor colors
    #  #
    #  # Colors which should be used to draw the terminal cursor. If these are unset,
    #  # the cursor color will be the inverse of the cell color.
    #  #cursor:
    #  #  text: '0x000000'
    #  #  cursor: '0xffffff'
    #
    #  # Normal colors
    #  normal:
    #    black:   '0x1d1d2b'
    #    red:     '0xB12929'
    #    green:   '0x4e9a06'
    #    yellow:  '0xc4a000'
    #    blue:    '0x3465a4'
    #    magenta: '0x75507b'
    #    cyan:    '0x06989a'
    #    white:   '0xd3d7cf'
    #
    #  # Bright colors
    #  bright:
    #    black:   '0x88807c'
    #    red:     '0xf15d22'
    #    green:   '0x73c48f'
    #    yellow:  '0xffce51'
    #    blue:    '0x48b9c7'
    #    magenta: '0xad7fa8'
    #    cyan:    '0x34e2e2'
    #    white:   '0xeeeeec'
# If `true`, bold text is drawn using the bright color variants.
#draw_bold_text_with_bright_colors: true
#
#
schemes:
  nord: &nord
    primary:
      background: '#2e3440'
      foreground: '#d8dee9'
      dim_foreground: '#a5abb6'
    cursor:
      text: '#2e3440'
      cursor: '#d8dee9'
    vi_mode_cursor:
      text: '#2e3440'
      cursor: '#d8dee9'
    selection:
      text: CellForeground
      background: '#4c566a'
    search:
      matches:
        foreground: CellBackground
        background: '#88c0d0'
      bar:
        background: '#434c5e'
        foreground: '#d8dee9'
    normal:
      black: '#3b4252'
      red: '#bf616a'
      green: '#a3be8c'
      yellow: '#ebcb8b'
      blue: '#81a1c1'
      magenta: '#b48ead'
      cyan: '#88c0d0'
      white: '#e5e9f0'
    bright:
      black: '#4c566a'
      red: '#bf616a'
      green: '#a3be8c'
      yellow: '#ebcb8b'
      blue: '#81a1c1'
      magenta: '#b48ead'
      cyan: '#8fbcbb'
      white: '#eceff4'
    dim:
      black: '#373e4d'
      red: '#94545d'
      green: '#809575'
      yellow: '#b29e75'
      blue: '#68809a'
      magenta: '#8c738c'
      cyan: '#6d96a5'
      white: '#aeb3bb'

  fairy-floss: &fairy-floss
    primary:
      background: '#5a5475'
      foreground: '#f8f8f2'
    cursor:
      text: '#f8f8f2'
      cursor: '#c7b7c7'
    normal:
      black: '#3b3a32'
      red: '#f1756f'
      green: '#6de874'
      yellow: '#e6c000'
      blue: '#a381ff'
      magenta: '#ff87b1'
      cyan: '#7ef5b8'
      white: '#c7b7c7'
    bright:
      black: '#685868'
      red: '#ff9f9a'
      green: '#7bfa81'
      yellow: '#ffea00'
      blue: '#c5a3ff'
      magenta: '#ffb8d1'
      cyan: '#c2ffdf'
      white: '#ffefff'

  dracula: &dracula
    primary:
      background: '#282a36'
      foreground: '#f8f8f2'
      bright_foreground: '#ffffff'
    cursor:
      text: CellBackground
      cursor: CellForeground
    vi_mode_cursor:
      text: CellBackground
      cursor: CellForeground
    search:
      matches:
        foreground: '#44475a'
        background: '#50fa7b'
      focused_match:
        foreground: '#44475a'
        background: '#ffb86c'
      bar:
        background: '#282a36'
        foreground: '#f8f8f2'
    hints:
      start:
        foreground: '#282a36'
        background: '#f1fa8c'
      end:
        foreground: '#f1fa8c'
        background: '#282a36'
    line_indicator:
      foreground: None
      background: None
    selection:
      text: CellForeground
      background: '#44475a'
    normal:
      black: '#21222c'
      red: '#ff5555'
      green: '#50fa7b'
      yellow: '#f1fa8c'
      blue: '#bd93f9'
      magenta: '#ff79c6'
      cyan: '#8be9fd'
      white: '#f8f8f2'
    bright:
      black: '#6272a4'
      red: '#ff6e6e'
      green: '#69ff94'
      yellow: '#ffffa5'
      blue: '#d6acff'
      magenta: '#ff92df'
      cyan: '#a4ffff'
      white: '#ffffff'

  tokyo-night: &tokyo-night
    # Default colors
    primary:
      background: '0x1a1b26'
      foreground: '0xa9b1d6'

    # Normal colors
    normal:
      black:   '0x32344a'
      red:     '0xf7768e'
      green:   '0x9ece6a'
      yellow:  '0xe0af68'
      blue:    '0x7aa2f7'
      magenta: '0xad8ee6'
      cyan:    '0x449dab'
      white:   '0x787c99'

    # Bright colors
    bright:
      black:   '0x444b6a'
      red:     '0xff7a93'
      green:   '0xb9f27c'
      yellow:  '0xff9e64'
      blue:    '0x7da6ff'
      magenta: '0xbb9af7'
      cyan:    '0x0db9d7'
      white:   '0xacb0d0'

  tokyo-night-storm: &tokyo-night-storm
    # Default colors
    primary:
      background: '0x24283b'
      foreground: '0xc0caf5'

    # Normal colors
    normal:
      black:   '0x1D202F'
      red:     '0xf7768e'
      green:   '0x9ece6a'
      yellow:  '0xe0af68'
      blue:    '0x7aa2f7'
      magenta: '0xbb9af7'
      cyan:    '0x7dcfff'
      white:   '0xa9b1d6'

    # Bright colors
    bright:
      black:   '0x414868'
      red:     '0xf7768e'
      green:   '0x9ece6a'
      yellow:  '0xe0af68'
      blue:    '0x7aa2f7'
      magenta: '0xbb9af7'
      cyan:    '0x7dcfff'
      white:   '0xc0caf5'

    indexed_colors:
      - { index: 16, color: '0xff9e64' }
      - { index: 17, color: '0xdb4b4b' }

colors: *tokyo-night-storm


## Colors (Pencil Light)
#colors:
# # Default Colors
# primary:
#   background: '0xf1f1f1'
#   foreground: '0x424242'
# # Normal colors
# normal:
#   black:   '0x212121'
#   red:     '0xc30771'
#   green:   '0x10a778'
#   yellow:  '0xa89c14'
#   blue:    '0x008ec4'
#   magenta: '0x523c79'
#   cyan:    '0x20a5ba'
#   white:   '0xe0e0e0'
# # Bright colors
# bright:
#   black:   '0x212121'
#   red:     '0xfb007a'
#   green:   '0x5fd7af'
#   yellow:  '0xf3e430'
#   blue:    '0x20bbfc'
#   magenta: '0x6855de'
#   cyan:    '0x4fb8cc'
#   white:   '0xf1f1f1'

# Colors (Cobalt 2)
#colors:
#  cursor:
#    text: '0xfefff2'
#    cursor: '0xf0cc09'
#
#  selection:
#    text: '0xb5b5b5'
#    background: '0x193549'
#
#  primary:
#    background: '0x132738'
#    foreground: '0xffffff'
#
#  normal:
#    black:   '0x000000'
#    red:     '0xff0000'
#    green:   '0x38de21'
#    yellow:  '0xffe50a'
#    blue:    '0x1460d2'
#    magenta: '0xff005d'
#    cyan:    '0x00bbbb'
#    white:   '0xbbbbbb'
#
#  bright:
#    black:   '0x555555'
#    red:     '0xf40e17'
#    green:   '0x3bd01d'
#    yellow:  '0xedc809'
#    blue:    '0x5555ff'
#    magenta: '0xff55ff'
#    cyan:    '0x6ae3fa'
#    white:   '0xffffff'
# Colors (Tomorrow Night Bright)
#colors:
  # Default colors
  #primary:
  #  background: '0x000000'
  #  foreground: '0xeaeaea'

    # Bright and dim foreground colors
    #
    # The dimmed foreground color is calculated automatically if it is not present.
    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
    # is `false`, the normal foreground color will be used.
    #dim_foreground: '0x9a9a9a'
    #bright_foreground: '0xffffff'

  # Cursor colors
  #
  # Colors which should be used to draw the terminal cursor. If these are unset,
  # the cursor color will be the inverse of the cell color.
  #cursor:
  #  text: '0x000000'
  #  cursor: '0xffffff'

  # Selection colors
  #
  # Colors which should be used to draw the selection area. If selection
  # background is unset, selection color will be the inverse of the cell colors.
  # If only text is unset the cell text color will remain the same.
  #selection:
  #  text: '0xeaeaea'
  #  background: '0x404040'

  # Normal colors
  #normal:
  #  black:   '0x000000'
  #  red:     '0xd54e53'
  #  green:   '0xb9ca4a'
  #  yellow:  '0xe6c547'
  #  blue:    '0x7aa6da'
  #  magenta: '0xc397d8'
  #  cyan:    '0x70c0ba'
  #  white:   '0xeaeaea'

  # Bright colors
  #bright:
  #  black:   '0x666666'
  #  red:     '0xff3334'
  #  green:   '0x9ec400'
  #  yellow:  '0xe7c547'
  #  blue:    '0x7aa6da'
  #  magenta: '0xb77ee0'
  #  cyan:    '0x54ced6'
  #  white:   '0xffffff'

  # Dim colors
  #
  # If the dim colors are not set, they will be calculated automatically based
  # on the `normal` colors.
  #dim:
  #  black:   '0x000000'
  #  red:     '0x8c3336'
  #  green:   '0x7a8530'
  #  yellow:  '0x97822e'
  #  blue:    '0x506d8f'
  #  magenta: '0x80638e'
  #  cyan:    '0x497e7a'
  #  white:   '0x9a9a9a'

  # Indexed Colors
  #
  # The indexed colors include all colors from 16 to 256.
  # When these are not set, they're filled with sensible defaults.
  #
  # Example:
  #   `- { index: 16, color: '0xff00ff' }`
  #
  #indexed_colors: []

# Visual Bell
#
# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
# rung, the terminal background will be set to white and transition back to the
# default background color. You can control the rate of this transition by
# setting the `duration` property (represented in milliseconds). You can also
# configure the transition function by setting the `animation` property.
#
# Values for `animation`:
#   - Ease
#   - EaseOut
#   - EaseOutSine
#   - EaseOutQuad
#   - EaseOutCubic
#   - EaseOutQuart
#   - EaseOutQuint
#   - EaseOutExpo
#   - EaseOutCirc
#   - Linear
#
# Specifying a `duration` of `0` will disable the visual bell.
#visual_bell:
#  animation: EaseOutExpo
#  duration: 0
#  color: '0xffffff'

# Background opacity
#
# Window opacity as a floating point number from `0.0` to `1.0`.
# The value `0.0` is completely transparent and `1.0` is opaque.
#background_opacity: 1.0

#selection:
  #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"

  # When set to `true`, selected text will be copied to the primary clipboard.
  #save_to_clipboard: false

# Allow terminal applications to change Alacritty's window title.
#dynamic_title: true

cursor:
  # Cursor style
  #
  # Values for `style`:
  #   - ▇ Block
  #   - _ Underline
  #   - | Beam
  style: 'Beam'

  # If this is `true`, the cursor will be rendered as a hollow box when the
  # window is not focused.
  unfocused_hollow: true

# Live config reload (changes require restart)
live_config_reload: true

# Shell
#
# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
# Entries in `shell.args` are passed unmodified as arguments to the shell.
#
# Default:
#   - (macOS) /bin/bash --login
#   - (Linux/BSD) user login shell
#   - (Windows) powershell
#shell:
#  program: /usr/bin/zsh
#  args:
#    - --login

# Startup directory
#
# Directory the shell is started in. If this is unset, or `None`, the working
# directory of the parent process will be used.
#working_directory: None

# WinPTY backend (Windows only)
#
# Alacritty defaults to using the newer ConPTY backend if it is available,
# since it resolves a lot of bugs and is quite a bit faster. If it is not
# available, the the WinPTY backend will be used instead.
#
# Setting this option to `true` makes Alacritty use the legacy WinPTY backend,
# even if the ConPTY backend is available.
#winpty_backend: false

# Send ESC (\x1b) before characters when alt is pressed.
#alt_send_esc: true

#debug:
  # Display the time it takes to redraw each frame.
  #render_timer: false

  # Keep the log file after quitting Alacritty.
  #persistent_logging: false

  # Log level
  #
  # Values for `log_level`:
  #   - None
  #   - Error
  #   - Warn
  #   - Info
  #   - Debug
  #   - Trace
  #log_level: Warn

  # Print all received window events.
  #print_events: false

  # Record all characters and escape sequences as test data.
  #ref_test: false

mouse:
  # Click settings
  #
  # The `double_click` and `triple_click` settings control the time
  # alacritty should wait for accepting multiple clicks as one double
  # or triple click.
  #double_click: { threshold: 300 }
  #triple_click: { threshold: 300 }

  # If this is `true`, the cursor is temporarily hidden when typing.
  hide_when_typing: false

  #url:
    # URL launcher
    #
    # This program is executed when clicking on a text which is recognized as a URL.
    # The URL is always added to the command as the last parameter.
    #
    # When set to `None`, URL launching will be disabled completely.
    #
    # Default:
    #   - (macOS) open
    #   - (Linux/BSD) xdg-open
    #   - (Windows) explorer
    #launcher:
    #  program: xdg-open
    #  args: []

    # URL modifiers
    #
    # These are the modifiers that need to be held down for opening URLs when clicking
    # on them. The available modifiers are documented in the key binding section.
    #modifiers: None

# Mouse bindings
#
# Mouse bindings are specified as a list of objects, much like the key
# bindings further below.
#
# Each mouse binding will specify a:
#
# - `mouse`:
#
#   - Middle
#   - Left
#   - Right
#   - Numeric identifier such as `5`
#
# - `action` (see key bindings)
#
# And optionally:
#
# - `mods` (see key bindings)
#mouse_bindings:
#  - { mouse: Middle, action: PasteSelection }

# Key bindings
#
# Key bindings are specified as a list of objects. For example, this is the
# default paste binding:
#
# `- { key: V, mods: Control|Shift, action: Paste }`
#
# Each key binding will specify a:
#
# - `key`: Identifier of the key pressed
#
#    - A-Z
#    - F1-F24
#    - Key0-Key9
#
#    A full list with available key codes can be found here:
#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
#
#    Instead of using the name of the keys, the `key` field also supports using
#    the scancode of the desired key. Scancodes have to be specified as a
#    decimal number. This command will allow you to display the hex scancodes
#    for certain keys:
#
#       `showkey --scancodes`.
#
# Then exactly one of:
#
# - `chars`: Send a byte sequence to the running application
#
#    The `chars` field writes the specified string to the terminal. This makes
#    it possible to pass escape sequences. To find escape codes for bindings
#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
#    of tmux. Note that applications use terminfo to map escape sequences back
#    to keys. It is therefore required to update the terminfo when changing an
#    escape sequence.
#
# - `action`: Execute a predefined action
#
#   - Copy
#   - Paste
#   - PasteSelection
#   - IncreaseFontSize
#   - DecreaseFontSize
#   - ResetFontSize
#   - ScrollPageUp
#   - ScrollPageDown
#   - ScrollLineUp
#   - ScrollLineDown
#   - ScrollToTop
#   - ScrollToBottom
#   - ClearHistory
#   - Hide
#   - Minimize
#   - Quit
#   - ToggleFullscreen
#   - SpawnNewInstance
#   - ClearLogNotice
#   - ReceiveChar
#   - None
#
#   (macOS only):
#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
#
# - `command`: Fork and execute a specified command plus arguments
#
#    The `command` field must be a map containing a `program` string and an
#    `args` array of command line parameter strings. For example:
#       `{ program: "alacritty", args: ["-e", "vttest"] }`
#
# And optionally:
#
# - `mods`: Key modifiers to filter binding actions
#
#    - Command
#    - Control
#    - Option
#    - Super
#    - Shift
#    - Alt
#
#    Multiple `mods` can be combined using `|` like this:
#       `mods: Control|Shift`.
#    Whitespace and capitalization are relevant and must match the example.
#
# - `mode`: Indicate a binding for only specific terminal reported modes
#
#    This is mainly used to send applications the correct escape sequences
#    when in different modes.
#
#    - AppCursor
#    - AppKeypad
#    - Alt
#
#    A `~` operator can be used before a mode to apply the binding whenever
#    the mode is *not* active, e.g. `~Alt`.
#
# Bindings are always filled by default, but will be replaced when a new
# binding with the same triggers is defined. To unset a default binding, it can
# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
# a no-op if you do not wish to receive input characters for that binding.
#key_bindings:
  # (Windows, Linux, and BSD only)
  #- { key: V,        mods: Control|Shift, action: Paste            }
  #- { key: C,        mods: Control|Shift, action: Copy             }
  #- { key: Insert,   mods: Shift,         action: PasteSelection   }
  #- { key: Key0,     mods: Control,       action: ResetFontSize    }
  #- { key: Equals,   mods: Control,       action: IncreaseFontSize }
  #- { key: Add,      mods: Control,       action: IncreaseFontSize }
  #- { key: Subtract, mods: Control,       action: DecreaseFontSize }
  #- { key: Minus,    mods: Control,       action: DecreaseFontSize }

  # (Windows only)
  #- { key: Return,   mods: Alt,           action: ToggleFullscreen }

  # (macOS only)
  #- { key: Key0,   mods: Command,         action: ResetFontSize    }
  #- { key: Equals, mods: Command,         action: IncreaseFontSize }
  #- { key: Add,    mods: Command,         action: IncreaseFontSize }
  #- { key: Minus,  mods: Command,         action: DecreaseFontSize }
  #- { key: K,      mods: Command,         action: ClearHistory     }
  #- { key: K,      mods: Command,         chars: "\x0c"            }
  #- { key: V,      mods: Command,         action: Paste            }
  #- { key: C,      mods: Command,         action: Copy             }
  #- { key: H,      mods: Command,         action: Hide             }
  #- { key: M,      mods: Command,         action: Minimize         }
  #- { key: Q,      mods: Command,         action: Quit             }
  #- { key: W,      mods: Command,         action: Quit             }
  #- { key: F,      mods: Command|Control, action: ToggleFullscreen }

  #- { key: Paste,                    action: Paste                            }
  #- { key: Copy,                     action: Copy                             }
  #- { key: L,         mods: Control, action: ClearLogNotice                   }
  #- { key: L,         mods: Control, chars: "\x0c"                            }
  #- { key: PageUp,    mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
  #- { key: PageDown,  mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
  #- { key: Home,      mods: Shift,   action: ScrollToTop,    mode: ~Alt       }
  #- { key: End,       mods: Shift,   action: ScrollToBottom, mode: ~Alt       }