Feature Request - Incomplete Devices #1117
Description
Thanks for taking the time to fill out this bug report!
To help me fix the issue can you include the following information:
- The Home Assistant install type (eg, docker, vm...)?: docker
- The Home Assistant version: 2025.12.2
- The Aarlo version: 0.8.1.19
- If the issue is GUI related, the Lovelace Hass Aarlo card version: N/A
If I you are pasting in configuration examples or log snippets please wrap them in back ticks to
preserve the indentation. See here for instructions.
If you are attaching whole logs and are worried about exposing sensitive data instructions on how to encrypt the logs can be found here.
-----BEGIN PYAARLO DUMP-----
gASVlAEAAAAAAAB9lCiMAWuUQgABAAAB4gV+lV82/tZXBW4uKfAjONw+fJgE3zj/D1QEHtVg7ajA
ozhccvWviW4bEufOrVDD1+LgyMox7RH0zo92Fkg/Mppd+/mENUsmvGRmdHctsJhPlYXT2hyHabl7
/nywTs6a/w9m8cIrQCR3CM+7LamdUi01sUtIYexdek66pawZYWGYQneWFpstbKImoqp7pvywemA4
FPFOP3/yl5bw6SdcyQNI2ZCWPSQisofUdElWvne4WrS+JiypBCx6Zze/Fb6sIWcA+wDsUpnzl96w
jfI7K40d+ImsCkenI5LBd4M+7VUT0CntTIP62NGJJ5v20mTU196fw1QtAr/TKgQvwikOlIwBbpRD
EPb5x9vTn4pP+2FCMNMxZg+UjAFvlENQOwCWWq0vMv+Ll9cF65kPxzD74dlmMLv1mQ52Q/dwBl49
hhNmS/a/3lOmwqoPl6FOrx53tb/OJVy0e+av9gJ9DJIPq8RmZVhf8Dy5fhtv03CUjAF0lEMQRs2l
vFYeOpi1WlrNtb3mC5R1Lg==
-----END PYAARLO DUMP-----
Describe the bug
A few Arlo device types missing some or all entities in HA:
Outdoor Siren: activate, deactivate, battery level, enable strobe, flash speed.
Pan-Tilt Camera: controls, erroneous battery level (these are wired, without battery).
Alarm Base Keypad (with backup module addon): battery level and cell connectivity.
Wireless keypad: battery level, volume
All-in-one Sensor: smoke/co alarm (related to microphone), water leak, numeric light level.
Logs
7-zip password protected archive attached (which I had to then gzip due to Github restrictions) contains debug logs. That archive password is in the PYAARLO DUMP. Logs have been mostly redacted/scrubbed.
Screenshots
If applicable, add screenshots to help explain your problem.