CHANGELOG.md

Changelog

Unreleased

• USART: refactor and add missing enums
• STM32H503: Add missing RNG_NSCR register
• Refactor timers, add enums
• Add placeholders for all peripherals
• STM32H5xx: Add H533 (#1129)
• G4: Fix swapped reset values for SPI4 CR1 and CR2 by deriving SPI4 from SPI1 (#957)
• STM32H5xx: Update SVD to version 1.7 and add H523 (#1124)
• TIM3's CCRx is 16-bit for G0Bx and G0C0
• Format yamls: remove unneeded quotes
• Apply existing RTC patches for new families, RTC alarm arrays
• Update L4/L4+ source to v1.4
• Manual enum names for EXRI & GPIO
• AES enums & patches
• HPDMA: clusters
• Derive GPIO registers
• H5: Array gpio registers
• Update STM32H7 source to v1.9
• HRTIM H7 fixe EECR3
• H5: Add RCC defitions for H56x/H573
• MP15x: Strip prefixes from peripherals
• MP15x: Fix DIGBYP bit access in RCC_BDCR
• Fix yaml parsing errors
• H7: add bit TRBUFF of DMA_SxCR of H747 cm4
• H7: add H723/25/30/33/42/50/55/A3/B0
• Fix inconsistencies for HRTIM_TIMF - stm32g4x4
• HRTIM H7: delete DLL
• HRTIM H7 & G4 fixes and enums
• HRTIM: remove timer block suffixes from register/field names
• HRTIM: derive identical registers
• HRTIM: specify TIM events for each block
• Collent in field arrays: ADC, GPIO, CAN, DSI, EXTI, SAI, DMA, TIM
• ADC: C0+G0+WL field arrays
• Derive SYSCFG EXTI fields
• L1 TIM9: add CCER
• Update STM32H5 source to v1.4
• Update STM32F3 source to V1.3
• Update STM32L0 source to v1.4
• F373 GPIOC LCKR, collect GPIO.BRR
• Update STM32L1 source to v1.4
• Update STM32F4 to V2.0 archive source
• Update STM32F7 to V2.4 archive source
• Update WL, WB source to v1.2
• modify LP_Timer1 interrupt instead of adding new
• Remove workaround for bug in duckscript's mv
• move _array and _cluster patches to devices/collect
• rename devices/common_patches to just devices/patches
• move field related patches from peripherals to devices/fields
• Replace makehtml.py with svdtools html
• Updated to svd2rust 0.35.0, svdtools 0.4.3, form 0.12.1, use tools binaries for CI
• Use svd2rust.toml config, use custom ident suffixes
• Normalized docs. Split (for cargo make) form task on form and fmt
• Show avaliable device features if no one selected (#998)
• Add download.sh for fast source archives update
• Add Open-CMSIS svdconv to for more checks
• Add cargo make yamls task for easy compare
• Add derivePathType to CMSIS-SVD schema
• Add possibility to publish crates with different versions
• Enable atomic operations on register support, Rust edition 2021 (#846)
• files in devices/patches moved to subdirectories
• remove excutable file perm bit from yaml file (#854)
• rename KEY field variants of IWDG_KR (#866)
• DMAMUX: merge registers in arrays
• move merge CAN FB fields in patch file
• Fix G0 TIM1 CCMR?_Input fields
• G4, L5, U5 TIM common fixes
• STM32U0xx initial support
• STM32U5xx: Update SVD to version 1.2 and add variants for xx=35,45,95,A5,99,A9 (#844)
• STM32U5xx: Update SVD to version 1.3 (#890)
• Fix several array descriptions
• Fix ADC SMPR fieldFs in L1
• Fix ADC SQR ranges
• Fix missing ADC.SMPR.SMPx_x
• Fix EXTI_IMR_IM9 field, H7 DMAMUX cluster names
• Fix ADC SR OVR enums
• Fix ADC modifiedWriteValues
• Add ADC enums for L4, L5, G0, H5, WB
• Fix ETH_MACFFR bitOffsets
• Fix adding OTG_FS GCCFG NOVBUSSENS
• GFXMMU LUT cluster
• Add missing CAN registers to l4x3/x5
• Remove CAN from F101/102
• Remove CAN2 from F103, rename CAN1 to CAN
• Fix L5 DMA cluster
• Fix writeConstraint bugs
• STM32G491: Add FDCAN2 peripheral
• Fix typo in STM32G491 FDCAN2 patch
• DMA ISR fixes for G0, G4
• F103: USB RESP1 fix name
• F4: collect SDIO RESP
• Fix DAC for stm32f4 (#921)
• PWR peripherals for STM32F4 (#857)
• tools_install: support $CARGO_HOME environment variable
• Split mmaps_pr workflow on mmaps_pr_generate and mmaps_pr_compare
• Update RNG for stm32h735
• H5: Add CRS, WWDG, IWDG, I2C, SBS, PWR, GPIO, EXTI, GPDMA, SPI, UART, RCC, TIM1-8 definitios
• TIM: rename & clean files
• 16-bit registers: IWDG, WWDG
• Add GPIOx:HSLVR
• Add dual bank flash related fields to g4 cat 3 devices
• Merge USART BRR fields on G4
• Add G4 DAC peripheral
• Fix incorrectly used _read, _modify
• G4:COMP fix and collect array
• Add USART v2C peripheral on G4
• doc on RNG peripheral for STM32F4 (#870)
• isDefault for some RCC enums
• H7: fix GPIO register reset values (#973)
• H735: add I2C5
• Doc QUADSPI peripheral (#875)
  • DR register can be access by 1 byte, half word and full word. Use .dr8(), .dr16(), .dr() to access this register.
• 16-bit SPI registers, add DR8 (#993) (fixed)
• 16-bit I2C registers (#995)
• U5: Strip prefixes from peripheral registers
• U5: Add ADC, DMA2D, EXTI, FMC, GPIO, I2C, OCTOSPI, PWR, RCC peripherals
• U5: MDF cluster
• U5/H5: collect GTZC registers in arrays
• H7: add stm32h7r/s devices (#972)
• WB: add RCC, SYSCFG enums
• Update G4 source to 2.2
• G4: fix FDCAN interrupt numbers being swapped
• G0X1, G4, H5, H7R/S, L5, U5: Add UCPD peripheral
• G4A1: Add FDCAN2 and rename USB peripheral
• G4A1: Add BCDR and adjust to be closer to G491
• G491 and G4A1: Add TIM20
• G471: Add OPAMP6
• G0: fix typo in HSIDIV (Div3 -> Div4)
• C071: Update svd zip to v1.2, add c071 and cleanup c0xx
• G0B1: make TIM4 16-bit timer
• C0,G0,H5: merge USB CHEP[0-7]R registers into array
• G0B1: force ARR field width to 16 bit when SVD describes ARR as 32-bit field for 16-bit timer.
• C0,G0,H5: fix field names in cmmr1_output registers
• G0: describe USB CHEP?R register
• doc on SYSCFG peripheral for STM32F4 (#852)
• LCD: fix and unify RAM registers
• G0: mark interrupt flags in USB ISTR as W0C
• G0: mark flags in USB CHEPR as W0C/W1T
• G0: add value enums for EXTICR[2-4]
• H5, U5: Add cluster definitions for GPDMA channels
• F2, F4, F7: Add definitions for OPTCR, OPTCR1 and OPTCR2 registers of FLASH peripheral
• F2, F4, F7: Fix several fields of FLASH peripheral and reorganise 'patches', 'fields' and 'collect' according to impacted registers

Family-specific:

• GO:
  • Update vendor SVD bundle from v1.1 to v1.6 (#947)
    • remove Cortex-M0+ core peripherals (use cortex-m crate instead)
    • add enums for RCC & SYSCFG
    • DMA?:IFCR changed from read-only (wrong) to write-only
    • split ADC:CHSELR1:CHSEL into separate 1-bit fields
    • correct multiple fields in EXTI, FLASH, PWR, RCC, TAMP, and SYSCFG
    • G030/G031/G041:
      • rename DMA to DMA1
      • remove DMA_Channel4_5_6_7 interrupt from DMAMUX (replaced by DMA1_Channel_4_5_DMAMUX in DMA1)
      • move PVD interrupt from EXTI to PWR
      • move ITLINE* registers from SYSCFG_ITLINE to SYSCFG
    • G050/G051/G061:
      • add missing peripherals AES (G061), COMP, DBG, DMA1, EXTI, FLASH, GPIO?, LPUART1 (G0x1), PWR, RCC, RNG (G061), RTC, SPI?, SYSCFG, and TAMP
      • USART?:CR1: change RXFNEIE to RXNEIE and TXFNEIE to TXEIE
      • remove DMA1_Channel4_5_6_7_DMAMUX_DMA2_Channel1_2_3_4_5 interrupt from DMAMUX (replaced by DMA1_Channel_4_5_6_7_DMAMUX in DMA1)
      • remove register prefix from LPTIM[12] (G0x1)
    • G070/G071/G081:
      • remove non-existent registers HWCFG*, VERR, IPIDR, and SIDR from ADC, RTC, and TAMP
      • rename DMA to DMA1
      • remove DMA_Channel4_5_6_7 interrupt from DMAMUX (replaced by DMA1_Channel_4_5_6_7_DMAMUX in DMA1)
      • split SYSCFG_VREFBUF peripheral into SYSCFG and VREFBUF (G0x1)
    • G0B0:
      • add missing peripherals ADC, EXTI, FLASH, I2C3, PWR, RCC, RTC, SPI?, SYSCFG, TAMP, TIM4, USB
      • USART?: many changes to CR1 and ISR
      • remove DMA_Channel4_5_6_7 interrupt from DMAMUX (replaced by DMA1_Channel_4_5_6_7_DMAMUX_DMA2_Channel1_2_3_4_5 in DMA1)
      • rename I2C2 interrupt to I2C2_I2C3
      • rename TIM3 interrupt to TIM3_TIM4
    • G0B1/G0C1:
      • add missing peripheral SYSCFG
      • fix SPI register sizes
      • remove TIM6_DAC interrupt
      • USART?: many changes to CR1 and ISR
      • add DMA? interrupts

[v0.15.1] 2022-07-04

• Updated to svd2rust 0.24.1 to fix critical codegen issue (#751)
• Fix FSDEF field being marked read-only in SAI (#752)

v0.15.0 2022-07-04

This release has been yanked from crates.io as it was generated using svd2rust 0.24.0 which suffered from a codegen bug (see #748).

Common changes:

• Strip prefixes from many peripheral registers (#661)
• Add SVDTOOLS env value for specifying patching tool (#673)
• Fix HTML generation on macOS (#679)
• Replace Python svd tools with Rust alternatives (#701)
• Added missing TIMx:CR1:OPM, removed unused CNT_H, ARR_H, CCR_H (#684)
• Use PascalCase for generated values of enums (#727)
• Updated to svd2rust 0.24.0 (#733)
• Document RTC ALARM and BKPR (#724)
• Extensive internal refactor of GPIO patches (#717)
• Change groupName of ADC_Common to ADC_Common (#719)
• Fix field access on many SAI fields (#691)

Family-specific:

• G0:

  • G0B1/G0C1: Update SVDs (#666)
  • G0B1/G0C1: Fix previous incorrect deletion of DMA1/2 (#675)
  • Clear all vendor provided enumeratedValues (#686)
  • Update SVDs, document DMA, various other patches (#687)
  • Make FLASH_WRP??R and FLASH_SECR writeable (#690)
  • G070: Rename SYSCFG_VREFBUF to SYSCFG, remove VREFBUF registers (#716)
  • Fix DMA and TIM15 register field names (#695)

• G4:

  • Fix ADC ADSTP, ADSTART, ADDIS, ADEN bit enumerations (#699)
  • Remove RNGSMEN -> RNGEN renaming to have AHB2SMENR.RNGSMEN (#729)

• H7:

  • h747: add midding DSI interrupt (#646)
  • h735, h7b3: remove unavailable DSI peripheral (#648)
  • Make ETH_MAC MMC mask register writable (#658)
  • RM0455: Fix incorrect rename of OCTOSPI peripheral (#653)
  • Arrayify HASH registers (#663)
  • Add bit ranges to HDMI CRC registers (#671)
  • H743/H753: Fix Overdrive and BDMADR fields (#649)
  • h7b3: clear all enumeratedValues (#686)
  • Change DMA CR to only cover SxCR, not LIFCR and HIFCR (#702)
  • H735: Add TIM23 and TIM24 (#712)
  • Fix ADC ADSTP, ADSTART, ADDIS, ADEN bit enumerations (#699)
  • Arrayify HSEM registers (#735, #737)
  • h747: add flash registers mirrored in bank2 (#704)
  • H735: Add CORDIC and FMAC peripherals (#677)
  • H735: Add missing TIM1, DCMI, OTG USB, RNG, LTDC, RAMECC interrupts (#677)
  • Rename DBGSTBD1, DBGSTPD1, DBGSLPD1 fields to match RM (#677)
  • RM0468: Add UART9/USART10, RM0455: fix USART base addresses (#652)

• F0:

  • F0x1/2/8: Add bit ranges to HDMI CRC registers (#671)
  • Add missing CRC POL register (#710)

• F2:

  • Fix incorrect bit position for Ethernet MMCTIMR TGFM (#689)
  • Add ADC EXTSEL enumerations (#707)
  • Apply existing OTG_FSv1 fixes (#706)

• F3:

  • Add missing 'P' to JADST (#696)
  • Fix ADC ADSTP, ADSTART, ADDIS, ADEN bit enumerations (#699)
  • Fix various fields access (#734)
  • F302: Rename DAC to DAC1 (#742)

• F4:

  • F469: Fix DSIHSOT_CCR register name (#664)
  • Fix incorrect bit position for Ethernet MMCTIMR TGFM (#689)
  • F411: Fix OTG_FS registers (#697)
  • Add ADC EXTSEL enumerations (#707)
  • Add GTPR register to UART (#713)
  • Document TIM2 ITR1_RMP enums (#678)
  • F410/411/412: add BDCR LSEMOD field (#708)

• F7:

  • Add SDMMC2EN and SDMMC2RST to F765, F7x7, F7x9 (#662)
  • Fix incorrect bit position for Ethernet MMCTIMR TGFM (#689)
  • Add bit ranges to HDMI CRC registers (#671)
  • Add ADC EXTSEL enumerations (#707)
  • Fix ADC DR RDATA name and description (#723)
  • Document safe ranges for CNT/ARR/CCR (#700)
  • Arrayify JPEG memory registers (#725)

• L0:

  • Re-add TIM21/TIM22 (#659)
  • Fix various fields access (#734)

• L4:

  • Add documentation for FIREWALL (#660)
  • Arrayify HASH registers (#663)
  • L4R9: Fix DSIHSOT interrupt name (#664)
  • L4R9: Add TIM3 and TIM4 (#669)
  • L4x5/6/R9: Rename DBGMCU APB_FZR to remove underscores (#681)
  • Add GPIOx ASCR and BRR registers (#680)
  • Added missing channel 2 on TIM15 (#705)
  • Fix ADC RDATA field name and description. (#723)
  • Add more enums for clock selection registers (#720)
  • Rename Polynomialcoefficients field to POL (#710)
  • Remove COMP1/COMP2 prefix from field names, document fields (#682)
  • Add L4R5 device (#740)

• L5:

  • Fix DMA CCR fields, arrayify GTZC VCTR (#715)

• WB:

  • Arrayify HSEM registers (#735, #737)

• WL:

  • Put all timers into common TIM group (#657)
  • Fix various fields access (#734)
  • Arrayify HSEM registers (#735, #737)

Contributors to this release:

@LeonSkoog @kenbell @ryan-summers @burrbull @richardeoin @systec-ms @DerFetzer @newAM @jspngh @jamwaffles @sephamorr @MathiasKoch @omion @davidlattimore @Sh3Rm4n @Windfisch @sorki @taylorh140 @reitermarkus @larchuto @jonas-schievink @tim-seoss @Wassasin @Gekkio @korken89 @maximeborges @sphw @dgoodland @X-yl @disasm @Pagten @oldsheep68 @TomDeRybel @mattcarp12

v0.14.0 2021-10-02

Family-specific:

• F0:
  • Fix duplicated aliased registers WAIT/AUTDLY and DMAEN/DMA1EN (#538)
• F3:
  • Mark HRTIM ISR FLT fields read-write (#592)
  • Fix reset value for FLASH OBR (#600)
• F4:
  • Add FLASH and PLLR description for F446 (#533)
  • Add FLTR register to all I2C peripherals (#534)
  • Rename DSIHOST to DSI for F469 (#585)
  • Fix UART RCC enable/reset bits (#589)
  • Remove non-existant TIM8 from F401 (#633)
• F7:
  • Strip DSI prefix from DSI registers (#585)
  • Fix reset value for RCC DCKCFGR (#600)
  • Fix all timer registers (#606)
  • Fix all SYSCFG registers (#612)
  • Fix all RCC registers (#613)
  • Fix all SDMMC registers (#620)
  • Fix CRC INIT and POL register offsets (#632)
• L0:
  • Add L0x0 family (#505)
  • Fix TIM CNT, ARR, CCR register sizes (#581)
  • Fix RCC_CSR RMVF bit offset in L0x2 and L0x3 (#566)
• L4:
  • Fix ADC SQR1.L name and description (#519)
  • Add missing APB1RSTR1.USBFSRST field for L4x3 (#526)
  • Fix AHB1 CRC bits for L4x3 (#517)
  • Add STM32L4R9 (#532)
  • Add SPI register descriptions (#535)
  • Strip DSI prefix from DSI registers (#585)
  • Fix RTC registers in L41x and L42x (#580)
  • Add USB_BCDR register, fix USB base address, and add USB interrupt (#580)
  • Add CRSEN to APB1ENR1 (#580)
  • Fix bit offset for CRC and USART bits in RCC (#571)
  • Fix LCD RAM_COM register size and arrayify (#552)
• L5:
  • Fix TIM15 CCR2 address offset (#518)
• H7:
  • Add WWDG field descriptions (#502)
  • Add DAC2AMEN to H7B3 (#500)
  • Add LTDC field descriptions (#512)
  • Fix FDCAN_TEST register to be writable (#574)
  • Update to latest ST SVDs and add H72x/H73x devices (#554)
  • Fix invalid patches to RCC registers (#615)
  • Fix and cluster DFSDM registers (#637)
  • Add SAI CR1 NOMCK alias bit to H743/753 and remove MCKEN (#640)
• G0:
  • Update to new ST SVD release (#514)
• G4:
  • Add I2C register definitions (#510)
  • Add USB BCDR register (#506)
  • Add GPIO register definitions (#531)
  • Add more descriptions for RCC (#528)
• WB:
  • Enable in nightly releases (#509)
  • Fix ADC SQR1.L name and description (#519)
  • Add missing EXTI fields (#580)
  • Fix TIM16 CR1 (#580)
  • Rename ADC to ADC1, add new ADC_Common peripheral (#623)
  • Fix SYSCFG register offsets (#624)
  • Fixes for ADC, TIM16, and TIM17 (#625)
  • Rename EXTI10_15 and EXTI5_9 interrupts to EXTI15_10 and EXTI9_5 (#634)
  • Fix TIM2.CNT bit width (#635)
• WL:
  • Update to new ST SVD release (#507)
  • Extensive patches and descriptions for WLE5, covering many peripherals (#559)
  • Unify EXTI.IMRx for WLE5 to match dual-core parts (#590)
  • Fix EXTI14 enumerated values (#599)
  • Add register descriptions for dual-core variants (#628)
• MP:
  • Strip DSI prefix from DSI registers (#585)
  • Add initial support for STM32MP153 device (#614)

Common:

• Many devices using USART "v2" had write constraints fixed to allow 9-bit words, affecting F0, F3, F7, H7, L0, L4, and WL families. (#558)
• The rt feature is now enabled by default; use default-features=false to disable (#582).
• Updated to svd2rust 0.19, with changes to the generated crate API. This update required a number of fixes to bugs in the SVD files, especially including fixes to timers across all families (#540, #546, #596).
• Fix a bug causing aliased registers to be suppressed in the HTML output (#591)
• Added a register map to HTML output (#598).
• Allow generating HTML output for selected families only (#607).
• Cortex-m-rt version 0.7 is now supported (#595, #603).

Contributors to this release:

@diondokter @mattico @noslaver @jglauche @ofauchon @richardeoin @Geens @wallacejohn @kevswims @qwandor @cyrusmetcalf @ByteNaked @cyberillithid @kenbell @tachiniererin @yusefkarim @lynaghk @sirhcel @timblakely @lulf @ijager @jorgeig-space @burrbull @timokroeger @newAM @maximeborges @David-OConnor @rmsc @jhbruhn @karlp @AndreasKarg

v0.13.1 2021-06-02

This version has only been released as a patch release for the stm32f3 family.

• F3:
  • Backport #558 to allow use in Discovery book

v0.13.0 2021-02-06

Family-specific:

• F3:
  • Fix GPIO OSPEEDR variants (#466)
  • Remove F3x8 device, which is now supported by F303 device (#495)
  • Rename DAC to DAC1 and add DAC2 to F303 (#497)
  • Correct EXTI IMR2/EMR2/RTSR2/FTSR2/SWIER2 addresses (#496)
• F4:
  • Fix ADC SMPR registers (#460)
  • Fix and document LTDC peripheral (#448)
  • Add OTG_FS interrupt to F413 (#470)
  • Add DSIHOST interrupt to F469 (#498)
• F7:
  • Add missing CRC fields (#447)
  • Fix and document LTDC peripheral (#448)
  • Add STM32F750 device (#464)
• L4:
  • Add ADC common register (#463)
  • Rename ADC to ADC1, add ADC2 (#465)
  • Add missing SMPR fields to ADC (#484)
  • Fix ADC CCR CH17SEL/CH18SEL field names (#491)
• L5:
  • Fix L552 TIMx interrupts (#468)
  • Add missing CPU blocks to SVD file (#476)
  • Add GPIO enum variants (#479)
  • Add RCC enum variants (#472)
  • Add basic FDCAN support (#478)
• G0:
  • Update which devices are built on docs.rs (#442)
• G4:
  • Fix incorrect IWDG/WWDG addresses (#475)
  • Fix SP3EN field name to SPI3EN (#481)
  • Add basic FDCAN support (#478)
  • Add CORDIC descriptions (#485)
  • Update to newest SVD files, adding G491 and G4A1 devices (#492)
  • Document OPAMP registers (#486)
• H7:
  • Array RTC_BCKP registers (#445)
  • Document RTC registers (#446)
  • Enable broken DMAMUX patch for H7B3 (#453)
  • Add/fix interrupts for H7B3 (#449)
  • Add cluster for MDMA registers (#454)
  • Fix CRC INIT and POL register addresses (#458)
  • Add basic FDCAN support (#478)
  • H7B3: Add DAC2 fields, remove LPTIM4/5 fields from RCC (#499)
• WL:
  • Family added with STM32WLE5 chpi (#444)
• WB:
  • Family added with STM32WB55 chip (#467)
• MP1:
  • Add missing CPU blocks to SVD file (#476)
  • Add basic FDCAN support (#478)

Common:

• Fixed a security issue in CI scripts (b7f023c), GHSL-2020-278 (thanks to @JarLob).
• CRC IDR set as 8 or 32 bit as appropriate across many families (#461)
• Fix description for RCC SWS field in many devices (#482)
• Fix misspelled MCJDIV to MCKDIV field in SAI CR1 register across many devices in f4, f7, f4, l4, l5, and wb55 families (#490)
• Fix misspelled WCKSEL to WUCKSEL field in RTC CR register across many devices in f2, g4, l1, l4, and wb55 (#494)

Thanks to:

@ijager @mattico @chengsun @richardeoin @maximeborges @AlyoshaVasilieva @YruamaLairba @korken89 @Piroro-hs @eupn @kenbell @matoushybl @diseraluca @TwoHandz @pawelchcki @wallacejohn

v0.12.1 2020-09-22

• Fixes a bug introduced by a new version of svdtools which resulted in missing interrupts for devices which used _copy in their patches (see #440)

v0.12.0 2020-09-20

Family-specific:

• F0:
  • Fix CRC INIT address (#407)
• F1:
  • F107 Ethernet and USB OTG support (#380)
• F3:
  • Document RTC (#373)
  • Document SYSCFG (#375)
  • Fix typos in OPAMP (#391)
  • Fix GPIO reset values (#406)
  • Add missing GPIO bits to f3x8 (#411)
• F4:
  • Document flash on F401 (#374)
  • F412 FSMC cleanup (#379)
  • Update SDIO fields (#383)
  • Rename I2C4 to FMPI2C1 and document it (#390)
  • Fix F446 SDIO (#393)
  • Add missing interrupts to F412 (#429)
• F7:
  • Fix typo in I2C enumeration variant (#433)
• L0:
  • Fix CCM missing bits on TIM21 (#415)
• L4:
  • Rename DMA interrupts for L4x3, 4x5, 552, 562 to match RM (#435)
• L5:
  • Add basic STM32L5 support (#371)
• G0:
  • Split G07x into G070 and G071 (#395)
  • Fixes for G070, G071, G081 (#398)
  • Group DMA registers (#408)
• H7:
  • Add basic H7B3 support (#378)
  • Remove DBGSTDBY_D3 and DBGSTOP_D3 bits (#385)
  • Document CCR and CCMR for TIM12-17 (#392)
  • Rename USBxOTGHSEN to USBxOTGEN, USBxOTGULPIHSEN to USBxULPIEN (#401)
  • Add Basic DMA (#403)
  • Fix UART7LPEN fixes (#404)
  • Add missing TRBUFF bit (#414)
  • RCC CCIP patches, SDMMC prefix for b3 (#416)
• MP1:
  • Update tooling to support family names with more than one letter (#423)
  • Add preliminary support for MP1 family (#425)

Common:

• Document CRC for F3, F7, H7, L0, L4 (#376)
• Swap to GHA for CI (#377)
• Fix Makefile for MacOS (#396)
• writeConstraints removed for DMA address registers (#400)
• Add virtual DR8 and DR16 registers to advanced CRC peripheral (#412)
• Spelling mistake in description for timer registers (#422)
• Support running makecrates.py for specific families (#424, #428)
• Fix duplicated enumeratedValues on some fields (#426)
• Add default-target per-family to docs.rs build (#427)
• Fix incorrect writeConstraint maximum of 65536 to 65535 on some fields (#434)
• Various fixes to ensure generated SVD files are compliant with schema

Thanks to:

@Sh3Rm4n @yusefkarim @richardeoin @samcrow @torkeldanielsson @jkristell @aurelj @helgrind @cyberillithid @ijager @ra-kete @Pagten @mattico @almusil @diondokter @maximeborges @Rahix @Piroro-hs

v0.11.0 2020-04-25

Family-specific:

• F0:
  • Fix width of TIM1 and TIM14-17 registers (now 16 bit) (#363)
• F3:
  • Flash documentation (#368)
  • Fix duplicate FPU interrupts (#357)
• F4:
  • Add missing interrupts (#360, #362, #341)
  • Fix duplicate FPU interrupts (#357)
  • Fix FSMC peripheral base address (#354)
  • RNG documentation (#348)
  • Links fixed in device table (#343)
  • Fix DMA CR.CHSEL width (#339)
  • Fix build error on Windows (#369)
• F7:
  • Fix DMA CR.CHSEL width (#339)
• H7:
  • HDMICRC renamed to CRC (#367)
  • Add SYSCFG_PWRCR register (#366)
  • Apply flash bank grouping to all parts (#364)
  • AXI documentation (#359)
  • RAMECC registers and documentation (#353)
  • SAI documentation and fixes (#347)
• L4:
  • Fix duplicate FPU interrupts (#357)
  • RCC field name fixes (#350)
• G4:
  • ADC documentation (#338)

Common:

• Fixed typo in I2C OA1EN Disabled variant name for many devices (#365)
• Hopefully fixed docs.rs building (#355)
• Generated crate directories no longer stored in git (#346)

Thanks to:

@Sh3Rm4n @richardeoin @hoachin @BryanKadzban @richardeoin @aurabindo @MarcoIeni @therealprof @ryan-summers @dirk-dms @aurelj @tachiniererin @torkeldanielsson

v0.10.0 2020-02-13

Family-specific:

• F0:
  • ADC documentation (#307)
  • EXTI documentation (#314)
  • Fix number of interrupt priority bits (#325)
• F1:
  • EXTI documentation (#314)
• F2:
  • ADC documentation (#306)
  • DMA documentation (#322)
  • EXTI documentation (#314)
• F3:
  • ADC documentation (#305)
  • GPIO documentation for F373 and F3x8 (#321)
  • EXTI documentation (#314)
  • Add COMP interrupts (#302)
• F4:
  • ADC documentation (#313)
  • Add missing reset and enable registers in AHB3 (#311)
  • EXTI documentation (#314)
  • DMA2D documentation (#333)
• F7:
  • ADC documentation (#310)
  • DMA documentation (#322, #329)
  • Add STM32F730 (#316)
  • EXTI documentation (#314)
  • DMA2D documentation (#333)
• H7:
  • ADC documentation (#312)
  • Fix EXTI access in single-core parts (#318)
  • DMA documentation (#322)
  • EXTI documentation (#314)
  • Further dual core support (#319)
  • DMA2D documentation (#333)
  • Split SOF field in DMAMUX.CSR (#336)
• L0:
  • Fix FLASH_SR.EOP access (#309)
  • EXTI documentation (#314)
• L4:
  • Fix USART3RST in RCC (#243)
  • Fix APB1ENR1 SPI2EN name (#315)
  • EXTI documentation (#314)
• G0:
  • Fix number of interrupt priority bits (#304)
  • EXTI documentation (#314)
• G4:
  • EXTI documentation (#314)
  • Fix comparator register offsets (#335)

Common:

• Remove scripts/svdpatch.py and use svdtools (#331)
• Added new nightlies repository which can be directly used in Cargo: nightlies

Thanks to:

@aurelj @dotcypress [@hannobraun] @samcrow @korken89 @richardeoin @rfuest @Sh3Rm4n @nickray @thinxer @lynaghk

v0.9.0 2019-11-10

Family-specific:

• F1:
  • F100 ADC (#270)
• F3:
  • ADC, COMP, DAC, HRTIM, OPAMP (#287)
  • HRTIM interrupt numbers (#289)
  • Update README concerning parts in each module (#295)
• F4:
  • F401 and F411 USB OTG FS patch (#272)
• F7:
  • Update SVD files to latest from vendor (#299)
• L0:
  • L0xx: NVIC priority bits (#275)
  • L0xx: fixes (#291, #292, #293)
  • L0x1: RCC APB1ENR TIM3 fix (#297)
  • L0xx: SYSCFG CFGR3 fixes (#300)
• H7:
  • Add dual core parts (#276, #285)
  • Correct PLL2DIVR names (#281)
  • Split ethernet peripheral in dual core parts (#288)
• G0:
  • Update G0 SVD files (#286)
• G4:
  • RCC fixes (#294)

Common:

• OTG HS patches (#272, #274)
• Updated to svd2rust 0.16.1 (#271, #283)
• Explicitly open YAML files in UTF-8 (#277)
• Makefile improvements (#278, #279, #280)
• svdpatch supports copying peripherals from another SVD (#298)

Thanks to:

@burrbull @disasm @albru123 @kitzin @richardeoin @dotcypress @richard7770 @jonas-schievink @ajfrantz @aurelj @osannolik @rfuest

v0.8.0 2019-07-28

Family-specific:

• F1:
  • FLASH ACR LATENCY field (#221)
  • ADC definitions (#233)
  • BKP definitions (#235, #256)
  • RTC definitions (#237)
  • Fix PLLMUL confusion (#259)
• F2:
  • ETH definitions (#252)
• F4:
  • F469: Renamed 48MSEL to CK48MSEL to avoid leading numerals (#199)
  • F411: Fixed missing interrupts (#268)
  • OTG HS peripheral fixes (#230)
• L0: Renamed 1_8V constants to V1_8 (etc) to avoid leading numerals (#199)
• L4:
  • Add nBOOT0 and nSWBOOT0 to FLASH OPTR (#217);w
  • L4x2: Document USB registers (#195)
  • L4x3: Add missing CRCCR register (#219)
  • L4x5: Fix wrong RNG interrupt value (#268)
• G0:
  • Renamed devices to STM32G0x0 and STM32G0x1 (#200)
  • DMA patch (#228)
• G4:
  • Initial support (#229)
• H7:
  • Fix width of ETHERNET_DMA.DMAMR.INTM (#201)
  • Fix DMA SC?R and cluster streams (#202)
  • Document DMAMUX{1,2} and split flag fields (#203)
  • Add missing DBGMCU (#204)
  • Fix CFG.FTHV/L spelling (#205)
  • RCC definitions and patches (#206, #242)
  • Update SVD file to ST version 1.4 (#208)
  • Fix MTLTxQUR and PPSCTRL (#211)
  • SPI DXPIE/TXPIE set to read-write (#215)
  • Fix Flash register access and RCC USART/UART field names (#218)
  • ADC definitions and fixes (#231, #244, #264)
  • LPTIM definitions (#240)
  • RNG definitions (#246)
  • Split into four devices: H743/H743v/H753/H753v (#247)

Common:

• Updated svdpatch.py to prohibit enumerated values with leading numerals (#199)
• PAR register added to DMA cluster on many families (#214)
• NotHalt renamed to NotHalf for DMA HTIF fields (#216)
• Timers:
  • TIM1 and CKD descriptions (#220)
  • TIM CCMR (#223)
  • TIM3/4 16-bit and definitions (#241)
  • Advanced timer definitions (#267)
• DAC refactor (#234)
• SAI definitions (#249)
• FMC/FSMC definitions (#253, #265)
• CAN definitoins (#254)
• DMA and LPTIM enums updated to new numeric format (#262)
• async in ADC renamed asynchronous since it's a keyword now (#263)

Thanks to:

@nickray @jordens @richardeoin @mabezdev @burrbull @dotcypress @albru123

v0.7.0 2019-04-22

Family-specific:

• F0: Add missing DMA interrupts (#181), flash peripheral (#172)
• F1: Add enumerated values for GPIO (#186)
• F3: Split up and fix SYSCFG, COMP, and OPAMP (#173, #189)
• F4: Missing USART interrupts added for F401 (#144)
• F7: Add some FMC documentation (#20)
• L0: Extensive updates (#148, #161) to L0 family coverage
• L4: Add RCC CRRCR register (#141), rename RCC APB1ENR1.SP3EN to SPI3EN (#183)
• H7: SPI CSTART update (#179), DMA and DMAMUX updates (#182), SPI documentation (#180), strip register prefixes (#190)

Common:

• Update to 2018 edition
• Updated cortex-m dependency to >=0.5.8,<0.7.0 to allow use of new 0.6.0 (#176)
• Restructured derived peripherals to typically be from the first numbered peripheral, which causes some type names to change (#146)
• Stripped peripheral-name prefixes from many register names (#177, #187, #189, #190)
• Many peripherals updated to use clusters and arrays, leading to some breaking changes in svd2rust output (#116, #167)
• RCC updates for many devices (#142)
• Fix TIM2-5 O24CE to OC4CE in many devices (#157)
• Document USB registers in many devices (#162)
• Extend SPI coverage for F1, F2, and F3 (#150)
• UART fixes and documentation for F1, F2, and F7 (#153)
• DBG renamed to DBGMCU on many devices (#175)
• Add makefile target to format SVD files (xmlformat, #166)

Thanks to:

@lochsh @jordens @aurelj @burrbull @jessebraham @therealprof @mathk @hnez @solderjs @lichtfeind @arkorobotics @astro @jkristell

v0.6.0 2019-01-14

Family-specific:

• F0: Extensively updated, RCC (#118, #130, #131), SYSCFG/COMP (#124), ADC (#129), SPI (#135)
• F1: Update RCC (#130)
• F2: RCC (#139)
• F4: USB OTG updated (#127), RCC (#130, #137)
• F7: RCC (#130, #137)
• L0: Fix wakeup pin bits in PWR_CSR (#120)
• G0: Introduced with basic support (#123)

Common:

• SPI: Added SSI, RXCRC, TXCRC (#138)
• We standardised on Div8 style dividers, instead of DIV8 or DIV_8.
• Travis builds now much faster (#134)
• Documentation links updated (#128)

Thanks to:

@octronics @birkenfeld @dotcypress @aurelj @albru123 @x37v @HarkonenBade

v0.5.0 2018-12-16

• Now built on stable Rust
• Updated to svd2rust 0.14.0 (#108)
• Added patch support for rebasing peripherals (#98)
• Added patch support for arrays (#107)
• Added patch support for clusters (#112)

Breaking Changes

• F0: Various fixes to RCC (#99, #114)
• F103: A few USB updates (#111)
• F103: Define a number of arrays and clusters (#112)
• F4: Various fixes to RCC (#95, #102)
• F4: Corrected UART Stop2 value (#103)
• L4: Various fixes to RCC (#101)
• L4: Fix USBFSEN (#92), other USB changes (#94)
• TIM: Various fixes (#96)

v0.4.0 2018-11-13

• F7: Ethernet peripheral updates
• F0: ADC CFGR2 JITOFF_D* renamed CKMODE (#77)
• F4: Missing RCC enable/reset bits for various peripherals (#80)
• USART updated for most families (#75)
• F4: Ethernet peripheral updates (#81, #87)
• F4: RCC updates (#83)

v0.3.2 2018-10-07

• F4: Update ethernet peripheral across entire family (#71, #73)

Breaking Changes

• F4 ethernet MACMIIDR field TD is renamed MD to align with the reference manual

v0.3.1 fe63529 2018-10-07

• Fix typo in tim16.yaml that prevents builds on most devices

v0.3.0 241ca45 2018-10-07

• H7x3: Add ETHERNET peripheral from scratch (#42)
• F0 and F1: GPIO updated (#49)
• F0: RCC updated (#58)
• L1: GPIO updated (#54)
• IWDG added for most devices (#45, #64)
• WWDG added for most devices (#48, #68)
• CRC added or updated for most devices (#46)
• Timers added or updated for most devices (#57)
• DMA added for most devices (#62)
• I2C added for most devices (#65)
• Supports Rust 1.30-beta for 2018 edition

Breaking Changes

• Most I2C peripherals have their SADDx, OA1x, or ADDx registers merged into a single SADD, OA1, or ADD register. 7-bit addresses will need to be written shifted left by 1, i.e., in 8-bit mode. See stm32-rs#65.

Thanks to @ehntoo, @octronics, @burrbull, and @MattCatz for lots of work in this release!

v0.2.3 c15e4a6 2018-09-07

• STM32F301: Fix incorrect aliasing of ADC.CSR and CCR
• STM32F4x9: Fix name of RM0386
• STM32F4: Improve timer coverage
• STM32F407: Include TIM_OPM
• Update to latest cortex-m-rt 0.6

v0.2.2 e648dae 2018-07-11

• Released crates now built with Form (#19, #29)
• Add a selection of documentation targets for docs.rs (#3)
• Many families: Add High/Low enum values for IDR/ODR on gpio_v2 (6c30cdc)
• Many families: Set DMA LIFCR and HIFCR to write-only (128b3d4)
• STM32F42{7,9}: Fix incorrect BWTR{3,4} (86dd104)
• STM32H7x3: Rename Flash->FLASH and fix PRAR_PRG2 (1e61674)
• STM32F7x{5,7,8,9}: Add PLLSAIRDY and PLLSAION (#35)

v0.2.1 954966a 2018-07-02

• Add STM32L4x5 device (#28)
• Add PLLR field for STM32F7x7 (#30)
• Add missing interrupts for STM32F7 devices (#27)
• Add PWR peripheral to various devices
• Fix incorrect USART3EN (#34)
• Fix incorrect naming for STM32H7 (#26)

v0.2.0 0c108b3 2018-06-12

• Changelog started
• Fix STM32H7x3 register naming (0c108b3)
• OS X compatibility
• Update cortex-m-rt to 0.5.1
• Update svd2rust to 0.13.1
• Fix nvicPrioBits being incorrect in many STM32s (de117ef)
• Add support for specifying interrupts and modifying CPU node