Menampilkan Nilai Accelerometer Pada CoreX

MenampilkanNilaiAccelerometerPadaCoreX/Connection.h

@@ -0,0 +1,20 @@
+WiFiClient net;
+CoreX corex;
+
+void setupCorex() {
+  Serial.println("CoreX IoT https://corex.id");
+  Serial.println("Menghubungkan ke WiFi");
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print(".");
+    delay(1000);
+  }
+
+  Serial.println("\nTerhubung ke WiFi!");
+  Serial.print("Menghubungkan ke server");
+  while (!corex.connect()) {
+    Serial.print(".");
+    delay(1000);
+  }
+
+  Serial.println("\nTerhubung ke server!");
+}

MenampilkanNilaiAccelerometerPadaCoreX/MenampilkanNilaiAccelerometerPadaCoreX.ino

@@ -0,0 +1,67 @@
+#include <CoreX.h>
+#include "Connection.h"
+#include <Adafruit_MPU6050.h>
+#include <Adafruit_Sensor.h>
+#include <Wire.h>
+
+Adafruit_MPU6050 mpu;
+
+// Ubah nilai auth_token dan device anda.
+const char* AUTH_TOKEN = "PGM8oemWd6gh8GA";
+const char* DEVICE_ID = "RlcaGvevt";
+
+CoreXTimer timer;       // Gunakan timer agar dapat mengeksekusi perintah setiap sekian milidetik tanpa blocking.
+
+// Ubah nilai berikut sesuai jaringan Anda.
+const char ssid[] = "Wokwi-GUEST";
+const char pass[] = "";
+
+void setup() {
+  Serial.begin(115200);
+  WiFi.begin(ssid, pass);
+  corex.begin(net);
+  timer.setInterval(1000, send);     // Lakukan send setiap 1000 milidetik.
+  setupCorex();
+  if (!mpu.begin()) {
+    Serial.println("Failed to find MPU6050 chip");
+    while (1) {
+      delay(10);
+    }
+  }
+  mpu.setAccelerometerRange(MPU6050_RANGE_16_G);
+  mpu.setGyroRange(MPU6050_RANGE_250_DEG);
+  mpu.setFilterBandwidth(MPU6050_BAND_21_HZ);
+  Serial.println("");
+  delay(100);
+}
+
+void loop() {
+  timer.run();
+  delay(10);
+  // Periksa apakah perangkat masih terhubung.
+  if (!corex.connected()) {
+    setupCorex();
+  }
+}
+
+void send() {
+   sensors_event_t a, g, temp;
+  mpu.getEvent(&a, &g, &temp);
+  /* Print out the values */
+  Serial.print(a.acceleration.x);
+  Serial.print(",");
+  Serial.print(a.acceleration.y);
+  Serial.print(",");
+  Serial.print(a.acceleration.z);
+  Serial.print(", ");
+  Serial.print(g.gyro.x);
+  Serial.print(",");
+  Serial.print(g.gyro.y);
+  Serial.print(",");
+  Serial.print(g.gyro.z);
+  Serial.println("");
+  delay(10);
+  corex.send("NIlaiX", a.acceleration.x);     // send ke bucket "hello" dengan data "world".
+  corex.send("NIlaiY", a.acceleration.y);
+  corex.send("NIlaiZ", a.acceleration.z);
+}