Add Strega Devices

vendor/index.yaml

@@ -659,8 +659,8 @@ vendors:
     name: STMicroelectronics International NV
     vendorID: 398
 
-  - id: strega-sprl
-    name: STREGA SPRL
+  - id: strega
+    name: STREGA
     vendorID: 401
 
   - id: swisscom

vendor/strega/index.yaml

@@ -0,0 +1,5 @@
+# This example contains just one end device: windsensor. It is referenced here in the index.
+
+endDevices:
+  # Unique identifier of the end device (lowercase, alphanumeric with dashes, max 36 characters)
+  - smart-valve # look in windsensor.yaml for the end device definition

vendor/strega/smart-valve-codec.yaml

@@ -0,0 +1,52 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: smart-valve.js
+  # Examples (optional)
+  #examples:
+  # - description: Periodic Uplink
+  #  input:
+  #   fPort: 4
+  #  bytes: [333138383223633D77DB]
+  #output:
+  #  data:{ Battery: 74,Cable: "0",Class: "0",DI_0: "0",DI_1: "0",Fraud: "0",Hygrometry: 46.82,Leakage: "0",Port: 4,Power: "0",Process: "true",Status: "00000010",Tamper: "1",Temperature: 23.96,Valve: "0"}
+  #- description: Unknown FPort
+  # input:
+  #  fPort: 42
+  #  bytes: [1, 42]
+  #output:
+  #  errors:
+  #    - unknown FPort
+
+# Downlink encoder encodes JSON object into a binary data downlink (optional)
+downlinkEncoder:
+  fileName: smart-valve.js
+#  examples:
+#    - description: open/close the valve
+#      input:
+#        data:
+#          f_port: 1
+#          payload: 01
+#      output:
+#        bytes: [31]
+#        fPort: 1
+#    - description: Invalid color
+#      input:
+#        data:
+#          led: blue
+#      output:
+#        errors:
+#          - invalid LED color
+
+# Downlink decoder decodes the encoded downlink message (optional, must be symmetric with downlinkEncoder)
+downlinkDecoder:
+  fileName: smart-valve.js
+#  examples:
+#    - description: open/close
+#      input:
+#        bytes: [31]
+#        fPort: 1
+#      output:
+#        data:
+#          f_port: 1
+#          payload: 01

vendor/strega/smart-valve-profile-868.yaml

@@ -0,0 +1,52 @@
+# Vendor profile ID, can be freely issued by the vendor
+# This vendor profile ID is also used on the QR code for LoRaWAN devices, see
+# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf
+vendorProfileID: 42
+
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.3
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.3-RevA
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 868.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/strega/smart-valve-profile-915.yaml

@@ -0,0 +1,52 @@
+# Vendor profile ID, can be freely issued by the vendor
+# This vendor profile ID is also used on the QR code for LoRaWAN devices, see
+# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf
+vendorProfileID: 42
+
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.3
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.3-RevA
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 868.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 27
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60