Improve the LBS configuration of the Lorix-One gateway

doc/content/gateways/lorix-one/lbs.md

@@ -19,17 +19,24 @@ In the list, select **LoRa Basic Station** and press apply.
 
 {{< figure src="../lorix-one-lora-settings-forwarder-change-bs.png" alt="LORIX One LoRa forwarder Basic Station selection" class="plain" >}}
 
-On the new page, scroll down to the **LoRaWAN Network Server** section and enable it.
+## LNS
+
+Scroll down to the **Configuration** section and enable the **LoRaWAN Network Server**.
 
 {{< figure src="../lorix-one-lora-settings-bs.png" alt="LORIX One LoRa forwarder Basic Station LNS" >}}
 
-Follow the instructions for [Connecting LNS]({{< ref "/gateways/lora-basics-station/lns" >}}).
+To connect the gateway via LNS protocol, follow the instructions for [Connecting LNS]({{< ref "/gateways/lora-basics-station/lns" >}}).
+
+Configure the **Address** with the server address of your deployment, and **Port** with LNS port `8887`.
+
+Enable the **Secured TLS connection** and upload the [LNS Server Certificate]({{< ref "/gateways/lora-basics-station/lns#lns-server-certificate--lns-trust" >}}) as a **Server authentication certificate**.
+
+Enable the **Client authentication**, select **Use token**, then copy the [LNS Key File]({{< ref "/gateways/lora-basics-station/lns#lns-key-file" >}}) and paste it as an **Authentication token**.
 
-If using CUPS, following the instructions for [Connecting CUPS]({{< ref "/gateways/lora-basics-station/cups" >}}).
 
 {{< figure src="../lorix-one-lora-settings-bs-lns.png" alt="LORIX One LoRa forwarder Basic Station LNS" class="plain" >}}
 
-Press the **save** button. In the **Control** pane above, press **start** and check the logs in the dedicated pane.
+Press the **SAVE** button. In the **Control** pane above, press **START** and check the logs in the dedicated pane.
 
 {{< figure src="../lorix-one-lora-settings-bs-control-logs.png" alt="LORIX One LoRa forwarder Basic Station start" >}}
 
@@ -49,3 +56,13 @@ If the connection fails, you will get this kind of message:
 Please check the configuration and the **LoRa Network Server** status. After a configuration change, always restart the Basic Station with the **Restart** button to make it effective.
 
 {{< note >}} If the Basic Station crashes for any reason, it will be automatically restarted if the **Auto-start** option is enabled. {{</ note >}}
+
+## CUPS
+
+Go to the **Configuration** section and enable **Configuration and Update Server**.
+
+{{< figure src="../lorix-one-lora-settings-bs.png" alt="LORIX One LoRa forwarder Basic Station LNS" >}}
+
+To connect the gateway via CUPS protocol, follow the instructions for [Connecting CUPS]({{< ref "/gateways/lora-basics-station/cups" >}}).
+
+Press the **SAVE** button. In the **Control** pane above, press **START** and check the logs in the dedicated pane.

doc/content/gateways/multitechconduit/lbs.md

@@ -7,6 +7,12 @@ This section contains instructions for connecting the Multitech Conduit AEP to {
 
 <!--more-->
 
+## Prerequisites:
+1. Multitech Conduit AEP gateway running [mPower 5.3.0 firmware or later](http://www.multitech.net/developer/downloads/).
+2. Hardware required: MTCDT with `MTAC-LORA-H mCard`
+
+{{< warning >}}{{% lbs %}} is not supported on Multitech Conduit gateways with [**MTAC-LORA-1.0**](http://www.multitech.net/developer/software/lora/running-basic-station-on-conduit/) USB cards. {{</ warning >}}
+
 To set up LoRa packet forwarding on the gateway, follow these steps.
 
 Click the **LoRaWAN** tab in the left menu.