-
Notifications
You must be signed in to change notification settings - Fork 3
da830 evm audio Differences between Kernels
Rick edited this page Sep 29, 2015
·
5 revisions
Adding the overlay in 4.1.4-ti-r9:
[ 2294.150157] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 2294.150200] bone_capemgr bone_capemgr: slot #4: override
[ 2294.150217] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 2294.150235] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 2294.150372] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 2294.150391] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 2294.151801] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 2294.164511] gpio-of-helper ocp:gpio_helper: ready
[ 2294.168943] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio' property of node '//fixedregulator@1[0]' - status (0)
[ 2294.169234] core:print_constraints:836: lz-codec-reg: no parameters
[ 2294.169327] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@1: lz-codec-reg supplying 0uV
[ 2294.173236] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 2294.187236] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 2294.234549] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 2294.234583] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 2294.240805] davinci_evm sound: snd_soc_register_card failed (-517)
[ 2294.255076] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio-reset' property of node '/ocp/i2c@4819c000/tlv320aic3104@0[0]' - status (0)
[ 2294.255140] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up IOVDD-supply from device tree
[ 2294.255247] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up DVDD-supply from device tree
[ 2294.255312] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up AVDD-supply from device tree
[ 2294.255381] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up DRVDD-supply from device tree
[ 2294.255456] snd_soc_core:snd_soc_register_codec:3064: tlv320aic3x-codec 2-0018: codec register 2-0018
[ 2294.255493] snd_soc_core:snd_soc_register_dais:2590: tlv320aic3x-codec 2-0018: ASoC: dai register 2-0018 #1
[ 2294.255511] snd_soc_core:snd_soc_register_dais:2634: tlv320aic3x-codec 2-0018: ASoC: Registered DAI 'tlv320aic3x-hifi'
[ 2294.255530] snd_soc_core:snd_soc_register_codec:3138: tlv320aic3x-codec 2-0018: ASoC: Registered codec 'tlv320aic3x-codec.2-0018'
[ 2294.272552] base:of_property_match_string:1398: comparing tx with tx
[ 2294.272604] base:of_property_match_string:1398: comparing rx with tx
[ 2294.272616] base:of_property_match_string:1398: comparing rx with rx
[ 2294.272670] base:of_property_match_string:1398: comparing common with tx
[ 2294.272683] base:of_property_match_string:1398: comparing common with rx
[ 2294.272696] base:of_property_match_string:1398: comparing rx with tx
[ 2294.272706] base:of_property_match_string:1398: comparing rx with rx
[ 2294.279998] base:of_property_match_string:1398: comparing tx with tx
[ 2294.285315] snd_soc_core:snd_soc_register_dais:2590: davinci-mcasp 48038000.mcasp: ASoC: dai register 48038000.mcasp #1
[ 2294.285349] snd_soc_core:snd_soc_register_dais:2634: davinci-mcasp 48038000.mcasp: ASoC: Registered DAI '48038000.mcasp'
[ 2294.285507] snd_soc_core:snd_soc_add_platform:2892: davinci-mcasp 48038000.mcasp: ASoC: Registered platform '48038000.mcasp'
[ 2294.334313] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 2294.334653] snd_soc_core:snd_soc_dapm_new_dai_widgets:3494: tlv320aic3x-codec 2-0018: ASoC: adding Playback widget
[ 2294.334684] snd_soc_core:snd_soc_dapm_new_dai_widgets:3513: tlv320aic3x-codec 2-0018: ASoC: adding Capture widget
[ 2294.335242] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late -2
[ 2294.335263] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late -1
[ 2294.335277] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 0
[ 2294.335291] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 1
[ 2294.335304] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 2
[ 2294.335345] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[ 2294.354337] snd_soc_core:soc_new_pcm:2510: davinci_evm sound: ASoC: registered pcm #0 AIC3X tlv320aic3x-hifi-0
[ 2294.357286] davinci_evm sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
[ 2294.357337] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Right ADC -> Capture
[ 2294.357359] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Left ADC -> Capture
[ 2294.357379] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Right DAC
[ 2294.357394] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Left DAC
Adding the overlay in 4.2.1-bone2:
[ 1144.730462] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 1144.730492] bone_capemgr bone_capemgr: slot #4: override
[ 1144.730506] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 1144.730521] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 1144.730626] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 1144.730643] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 1144.736281] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 1144.745769] gpio-of-helper ocp:gpio_helper: ready
[ 1144.746227] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio' property of node '//fixedregulator@1[0]' - status (0)
[ 1144.746441] core:print_constraints:844: lz-codec-reg: no parameters
[ 1144.746501] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@1: lz-codec-reg supplying 0uV
[ 1144.749082] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 1144.760237] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 1144.894483] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 1144.900819] davinci_evm sound: snd_soc_register_card failed (-517)
[ 1144.909250] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio-reset' property of node '/ocp/i2c@4819c000/tlv320aic3104@0[0]' - status (0)
[ 1144.909295] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up IOVDD-supply from device tree
[ 1144.909349] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up DVDD-supply from device tree
[ 1144.909397] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up AVDD-supply from device tree
[ 1144.909432] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up DRVDD-supply from device tree
[ 1144.926564] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 1144.932889] davinci_evm sound: snd_soc_register_card failed (-517)
[ 1144.944102] base:of_property_match_string:1398: comparing tx with tx
[ 1144.944142] base:of_property_match_string:1398: comparing rx with tx
[ 1144.944150] base:of_property_match_string:1398: comparing rx with rx
[ 1144.944187] base:of_property_match_string:1398: comparing common with tx
[ 1144.944195] base:of_property_match_string:1398: comparing common with rx
[ 1144.944205] base:of_property_match_string:1398: comparing rx with tx
[ 1144.944213] base:of_property_match_string:1398: comparing rx with rx
[ 1144.946502] base:of_property_match_string:1398: comparing tx with tx
[ 1144.948166] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[ 1144.960896] davinci_evm sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
Full dmesg 4.1.4-ti-r9:
root@beaglebone:/home/debian# echo BB-ENABLE-PRU > $SLOTS
root@beaglebone:/home/debian# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.4-ti-r9 (root@b1-omap5-uevm-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Tue Aug 11 00:31:44 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 24 MiB at 0x9e000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c0f8e700, node_mem_map df96d000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df928000 s22336 r8192 d22720 u53248
[ 0.000000] pcpu-alloc: s22336 r8192 d22720 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8 dyndbg="file drivers/of/base.c +pflm; file sound* +pflm; file pinctrl/* +pflm; file drivers/gpio/* +pflm; file drivers/regulator* +pflm; file *cape* +pflm" root=UUID=69f859b1-c308-41c9-8ca7-a3d0042031e8 ro rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 470984K/522240K available (10710K kernel code, 924K rwdata, 3708K rodata, 684K init, 902K bss, 26680K reserved, 24576K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e1cdf8 (14420 kB)
.init : 0xc0e1d000 - 0xc0ec8000 ( 684 kB)
.data : 0xc0ec8000 - 0xc0faf014 ( 925 kB)
.bss : 0xc0fb2000 - 0xc10938c0 ( 903 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000040] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000054] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000421] Console: colour dummy device 80x30
[ 0.000450] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000459] This ensures that you still see kernel messages. Please
[ 0.000467] update your kernel commandline.
[ 0.000488] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.088880] pid_max: default: 32768 minimum: 301
[ 0.089031] Security Framework initialized
[ 0.089117] AppArmor: AppArmor disabled by boot time parameter
[ 0.089128] Yama: becoming mindful.
[ 0.089356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089372] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090302] Initializing cgroup subsys blkio
[ 0.090332] Initializing cgroup subsys memory
[ 0.090382] Initializing cgroup subsys devices
[ 0.090402] Initializing cgroup subsys freezer
[ 0.090431] Initializing cgroup subsys net_cls
[ 0.090448] Initializing cgroup subsys perf_event
[ 0.090465] Initializing cgroup subsys net_prio
[ 0.090525] CPU: Testing write buffer coherency: ok
[ 0.090587] ftrace: allocating 34724 entries in 102 pages
[ 0.184284] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.184409] Setting up static identity map for 0x80008280 - 0x800082d8
[ 0.248882] Brought up 1 CPUs
[ 0.248909] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.248918] CPU: All CPU(s) started in SVC mode.
[ 0.249830] devtmpfs: initialized
[ 0.267653] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.287658] omap_hwmod: tptc0 using broken dt data from edma
[ 0.287890] omap_hwmod: tptc1 using broken dt data from edma
[ 0.288097] omap_hwmod: tptc2 using broken dt data from edma
[ 0.293997] omap_hwmod: debugss: _wait_target_disable failed
[ 0.348781] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.350952] xor: measuring software checksum speed
[ 0.448905] arm4regs : 1219.600 MB/sec
[ 0.548835] 8regs : 1092.400 MB/sec
[ 0.648835] 32regs : 1090.000 MB/sec
[ 0.748834] neon : 1665.600 MB/sec
[ 0.748843] xor: using function: neon (1665.600 MB/sec)
[ 0.749021] pinctrl core: initialized pinctrl subsystem
[ 0.749722] core:print_constraints:836: regulator-dummy: no parameters
[ 0.751088] NET: Registered protocol family 16
[ 0.754798] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.760850] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.761110] OMAP GPIO hardware version 0.1
[ 0.762074] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.762913] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.763709] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.772364] No ATAGs?
[ 0.772399] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.774333] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 0.774353] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 0.979089] raid6: int32x1 gen() 231 MB/s
[ 1.148891] raid6: int32x1 xor() 175 MB/s
[ 1.318983] raid6: int32x2 gen() 304 MB/s
[ 1.488934] raid6: int32x2 xor() 199 MB/s
[ 1.658994] raid6: int32x4 gen() 284 MB/s
[ 1.828898] raid6: int32x4 xor() 199 MB/s
[ 1.998917] raid6: int32x8 gen() 282 MB/s
[ 2.168984] raid6: int32x8 xor() 186 MB/s
[ 2.338866] raid6: neonx1 gen() 1464 MB/s
[ 2.508857] raid6: neonx2 gen() 1889 MB/s
[ 2.678833] raid6: neonx4 gen() 1921 MB/s
[ 2.848853] raid6: neonx8 gen() 811 MB/s
[ 2.848863] raid6: using algorithm neonx4 gen() 1921 MB/s
[ 2.848872] raid6: using intx1 recovery algorithm
[ 2.858341] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 2.858965] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]'
[ 2.859213] core:print_constraints:836: vmmcsd_fixed: 3300 mV
[ 2.859321] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@0: vmmcsd_fixed supplying 3300000uV
[ 2.861783] vgaarb: loaded
[ 2.862525] SCSI subsystem initialized
[ 2.862921] libata version 3.00 loaded.
[ 2.863292] usbcore: registered new interface driver usbfs
[ 2.863370] usbcore: registered new interface driver hub
[ 2.863486] usbcore: registered new device driver usb
[ 2.864094] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 2.864155] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 2.864303] pps_core: LinuxPPS API ver. 1 registered
[ 2.864312] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.864352] PTP clock support registered
[ 2.865129] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 2.865891] Advanced Linux Sound Architecture Driver Initialized.
[ 2.866728] NetLabel: Initializing
[ 2.866741] NetLabel: domain hash size = 128
[ 2.866748] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.866814] NetLabel: unlabeled traffic allowed by default
[ 2.867163] Switched to clocksource timer1
[ 2.991643] NET: Registered protocol family 2
[ 2.992624] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.992678] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.992738] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.992825] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.992850] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.993165] NET: Registered protocol family 1
[ 2.993778] RPC: Registered named UNIX socket transport module.
[ 2.993792] RPC: Registered udp transport module.
[ 2.993799] RPC: Registered tcp transport module.
[ 2.993807] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.993837] PCI: CLS 0 bytes, default 64
[ 2.994450] Unpacking initramfs...
[ 3.291616] Freeing initrd memory: 4316K (cfbc9000 - d0000000)
[ 3.292139] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[ 3.292210] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 3.295015] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 3.295144] audit: initializing netlink subsys (disabled)
[ 3.295258] audit: type=2000 audit(3.230:1): initialized
[ 3.296867] zpool: loaded
[ 3.297419] VFS: Disk quotas dquot_6.6.0
[ 3.297509] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.298382] NFS: Registering the id_resolver key type
[ 3.298466] Key type id_resolver registered
[ 3.298475] Key type id_legacy registered
[ 3.298503] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.298874] fuse init (API version 7.23)
[ 3.299158] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.302708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.302969] io scheduler noop registered
[ 3.302986] io scheduler deadline registered
[ 3.303026] io scheduler cfq registered (default)
[ 3.304502] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 3.306698] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 3.308344] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 3.311664] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 155, base_baud = 3000000) is a 8250
[ 3.319181] console [ttyS0] enabled
[ 3.320645] [drm] Initialized drm 1.1.0 20060810
[ 3.320767] usbcore: registered new interface driver udl
[ 3.321346] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.326511] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.326602] usbcore: registered new interface driver pegasus
[ 3.326676] usbcore: registered new interface driver rtl8150
[ 3.326738] usbcore: registered new interface driver r8152
[ 3.328531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.328571] ehci-pci: EHCI PCI platform driver
[ 3.328645] ehci-platform: EHCI generic platform driver
[ 3.328818] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.330533] gpiolib:__gpiod_get_index:1974: am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset
[ 3.330557] gpiolib:__gpiod_get_index:1979: am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 3.330577] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.330592] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.330605] gpiolib:__gpiod_get_index:1992: am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 3.330620] gpiolib:__gpiod_get_index:1997: am335x-phy-driver 47401300.usb-phy: lookup for GPIO reset failed
[ 3.330635] gpiolib:__gpiod_get_index:1974: am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect
[ 3.330647] gpiolib:__gpiod_get_index:1979: am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 3.330661] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.330675] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.330687] gpiolib:__gpiod_get_index:1992: am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 3.330700] gpiolib:__gpiod_get_index:1997: am335x-phy-driver 47401300.usb-phy: lookup for GPIO vbus-detect failed
[ 3.330757] core:of_get_regulator:142: am335x-phy-driver 47401300.usb-phy: Looking up vcc-supply from device tree
[ 3.330774] core:of_get_regulator:149: am335x-phy-driver 47401300.usb-phy: Looking up vcc-supply property in node /ocp/usb@47400000/usb-phy@47401300 failed
[ 3.330787] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 3.359474] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.359496] musb-hdrc: MHDRC RTL version 2.0
[ 3.359506] musb-hdrc: setup fifo_mode 4
[ 3.359527] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.360910] gpiolib:__gpiod_get_index:1974: am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset
[ 3.360931] gpiolib:__gpiod_get_index:1979: am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 3.360951] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.360966] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.360978] gpiolib:__gpiod_get_index:1992: am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 3.360992] gpiolib:__gpiod_get_index:1997: am335x-phy-driver 47401b00.usb-phy: lookup for GPIO reset failed
[ 3.361007] gpiolib:__gpiod_get_index:1974: am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect
[ 3.361019] gpiolib:__gpiod_get_index:1979: am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 3.361033] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.361047] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.361059] gpiolib:__gpiod_get_index:1992: am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 3.361072] gpiolib:__gpiod_get_index:1997: am335x-phy-driver 47401b00.usb-phy: lookup for GPIO vbus-detect failed
[ 3.361124] core:of_get_regulator:142: am335x-phy-driver 47401b00.usb-phy: Looking up vcc-supply from device tree
[ 3.361140] core:of_get_regulator:149: am335x-phy-driver 47401b00.usb-phy: Looking up vcc-supply property in node /ocp/usb@47400000/usb-phy@47401b00 failed
[ 3.361152] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 3.409372] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.409395] musb-hdrc: MHDRC RTL version 2.0
[ 3.409404] musb-hdrc: setup fifo_mode 4
[ 3.409422] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.409582] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.409963] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.410267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.410281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.410292] usb usb1: Product: MUSB HDRC host driver
[ 3.410302] usb usb1: Manufacturer: Linux 4.1.4-ti-r9 musb-hcd
[ 3.410312] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.411184] hub 1-0:1.0: USB hub found
[ 3.411249] hub 1-0:1.0: 1 port detected
[ 3.488184] mousedev: PS/2 mouse device common for all mice
[ 3.489137] omap_rtc 44e3e000.rtc: already running
[ 3.489629] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.490420] i2c /dev entries driver
[ 3.491993] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.492909] gpiolib:__gpiod_get_index:1974: omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd
[ 3.492929] gpiolib:__gpiod_get_index:1979: omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 3.492966] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0)
[ 3.493034] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.493053] gpiolib:__gpiod_get_index:1974: omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp
[ 3.493066] gpiolib:__gpiod_get_index:1979: omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 3.493080] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'
[ 3.493094] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'
[ 3.493107] gpiolib:__gpiod_get_index:1992: omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup
[ 3.493121] gpiolib:__gpiod_get_index:1997: omap_hsmmc 48060000.mmc: lookup for GPIO wp failed
[ 3.500523] core:of_get_regulator:142: omap_hsmmc 48060000.mmc: Looking up vmmc-supply from device tree
[ 3.500669] core:of_get_regulator:142: omap_hsmmc 48060000.mmc: Looking up vmmc_aux-supply from device tree
[ 3.500687] core:of_get_regulator:149: omap_hsmmc 48060000.mmc: Looking up vmmc_aux-supply property in node /ocp/mmc@48060000 failed
[ 3.500706] core:of_get_regulator:142: omap_hsmmc 48060000.mmc: Looking up pbias-supply from device tree
[ 3.500720] core:of_get_regulator:149: omap_hsmmc 48060000.mmc: Looking up pbias-supply property in node /ocp/mmc@48060000 failed
[ 3.538044] gpiolib:__gpiod_get_index:1974: omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd
[ 3.538070] gpiolib:__gpiod_get_index:1979: omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 3.538089] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 3.538103] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 3.538116] gpiolib:__gpiod_get_index:1992: omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 3.538130] gpiolib:__gpiod_get_index:1997: omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed
[ 3.538146] gpiolib:__gpiod_get_index:1974: omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp
[ 3.538157] gpiolib:__gpiod_get_index:1979: omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 3.538170] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 3.538184] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 3.538196] gpiolib:__gpiod_get_index:1992: omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 3.538208] gpiolib:__gpiod_get_index:1997: omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed
[ 3.538545] core:of_get_regulator:142: omap_hsmmc 481d8000.mmc: Looking up vmmc-supply from device tree
[ 3.538711] core:of_get_regulator:142: omap_hsmmc 481d8000.mmc: Looking up vmmc_aux-supply from device tree
[ 3.538732] core:of_get_regulator:149: omap_hsmmc 481d8000.mmc: Looking up vmmc_aux-supply property in node /ocp/mmc@481d8000 failed
[ 3.538749] core:of_get_regulator:142: omap_hsmmc 481d8000.mmc: Looking up pbias-supply from device tree
[ 3.538764] core:of_get_regulator:149: omap_hsmmc 481d8000.mmc: Looking up pbias-supply property in node /ocp/mmc@481d8000 failed
[ 3.577787] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@2[0]' - status (0)
[ 3.578079] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@3[0]' - status (0)
[ 3.578255] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@4[0]' - status (0)
[ 3.578421] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@5[0]' - status (0)
[ 3.578746] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.579097] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.584390] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.586422] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.588123] usbcore: registered new interface driver usbhid
[ 3.588138] usbhid: USB HID core driver
[ 3.589466] ashmem: initialized
[ 3.590370] remoteproc0: wkup_m3 is available
[ 3.590387] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 3.590396] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 3.595344] snd_soc_core:snd_soc_register_codec:3064: snd-soc-dummy snd-soc-dummy: codec register snd-soc-dummy
[ 3.595396] snd_soc_core:snd_soc_register_dais:2590: snd-soc-dummy snd-soc-dummy: ASoC: dai register snd-soc-dummy #1
[ 3.595413] snd_soc_core:snd_soc_register_dais:2634: snd-soc-dummy snd-soc-dummy: ASoC: Registered DAI 'snd-soc-dummy-dai'
[ 3.595429] snd_soc_core:snd_soc_register_codec:3138: snd-soc-dummy snd-soc-dummy: ASoC: Registered codec 'snd-soc-dummy'
[ 3.595444] snd_soc_core:snd_soc_register_platform:2909: snd-soc-dummy snd-soc-dummy: ASoC: platform register snd-soc-dummy
[ 3.595462] snd_soc_core:snd_soc_add_platform:2892: snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
[ 3.595989] oprofile: using arm/armv7
[ 3.596434] NET: Registered protocol family 10
[ 3.598343] mip6: Mobile IPv6
[ 3.598377] NET: Registered protocol family 17
[ 3.598536] Key type dns_resolver registered
[ 3.598551] mpls_gso: MPLS GSO support
[ 3.598874] omap_voltage_late_init: Voltage driver support not added
[ 3.605743] core:of_get_regulator:142: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.605808] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[ 3.605822] cpu cpu0: cpu0 clock notifier not ready, retry
[ 3.612121] ThumbEE CPU extension supported.
[ 3.612159] Registering SWP/SWPB emulation handler
[ 3.612352] PM: bootloader does not support rtc-only!
[ 3.613860] registered taskstats version 1
[ 3.615023] Btrfs loaded
[ 3.625448] mmc1: MAN_BKOPS_EN bit is not set
[ 3.630847] mmc1: new high speed MMC card at address 0001
[ 3.635324] mmcblk0: mmc1:0001 MMC04G 3.60 GiB
[ 3.635731] mmcblk0boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 3.636088] mmcblk0boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 3.637502] mmcblk0: p1
[ 3.645191] Key type encrypted registered
[ 3.668231] core:print_constraints:836: vdds_dpr: at 1500 mV
[ 3.668917] core:machine_constraints_voltage:935: vdd_mpu: override max_uV, 1378000 -> 1375000
[ 3.669503] core:print_constraints:836: vdd_mpu: 925 <--> 1375 mV at 1325 mV
[ 3.670703] core:print_constraints:836: vdd_core: 925 <--> 1150 mV at 1125 mV
[ 3.671876] core:print_constraints:836: vio,vrtc,vdds: at 1800 mV
[ 3.673031] core:print_constraints:836: vdd_3v3aux: at 3300 mV
[ 3.674208] core:print_constraints:836: vdd_1v8: 1800 mV
[ 3.675356] core:print_constraints:836: vdd_3v3a: at 3300 mV
[ 3.676452] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.677035] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.677091] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.679131] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679564] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679967] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680374] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680419] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.681555] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.681810] remoteproc0: powering up wkup_m3
[ 3.681831] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 219663
[ 3.682093] remoteproc0: remote processor wkup_m3 is now up
[ 3.682119] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version 190 not supported
[ 3.687821] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,00C0,3214BBBK4221'
[ 3.687859] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.687895] base:of_property_match_string:1398: comparing slot0 with baseboard
[ 3.687906] base:of_property_match_string:1398: comparing slot0 with slot0
[ 3.747184] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.752982] base:of_property_match_string:1398: comparing slot1 with baseboard
[ 3.752993] base:of_property_match_string:1398: comparing slot1 with slot0
[ 3.753003] base:of_property_match_string:1398: comparing slot1 with slot1
[ 3.807179] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.812968] base:of_property_match_string:1398: comparing slot2 with baseboard
[ 3.812979] base:of_property_match_string:1398: comparing slot2 with slot0
[ 3.812989] base:of_property_match_string:1398: comparing slot2 with slot1
[ 3.812999] base:of_property_match_string:1398: comparing slot2 with slot2
[ 3.827191] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.867176] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.872973] base:of_property_match_string:1398: comparing slot3 with baseboard
[ 3.872985] base:of_property_match_string:1398: comparing slot3 with slot0
[ 3.872995] base:of_property_match_string:1398: comparing slot3 with slot1
[ 3.873005] base:of_property_match_string:1398: comparing slot3 with slot2
[ 3.873015] base:of_property_match_string:1398: comparing slot3 with slot3
[ 3.897079] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
[ 3.904281] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.910177] bone_capemgr bone_capemgr: initialized OK.
[ 3.910487] core:of_get_regulator:142: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.910879] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.911084] core:of_get_regulator:142: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.911387] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.967227] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.967250] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.967793] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 3.967831] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffe]
[ 3.969072] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176
[ 3.969093] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.969104] usb 1-1: Product: 802.11n WLAN Adapter
[ 3.969114] usb 1-1: Manufacturer: Realtek
[ 3.969124] usb 1-1: SerialNumber: 00e04c000001
[ 3.976262] libphy: 4a101000.mdio: probed
[ 3.976296] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.977494] cpsw 4a100000.ethernet: Detected MACID = 6c:ec:eb:5c:4d:a5
[ 3.977549] base:of_property_match_string:1398: comparing fck with fck
[ 3.979395] omap_rtc 44e3e000.rtc: setting system clock to 2015-09-29 23:00:48 UTC (1443567648)
[ 3.979427] of_cfs_init
[ 3.979566] of_cfs_init: OK
[ 3.985555] PM: Hibernation image not present or could not be loaded.
[ 3.985718] ALSA device list:
[ 3.985727] No soundcards found.
[ 3.987372] Freeing unused kernel memory: 684K (c0e1d000 - c0ec8000)
[ 4.079726] systemd-udevd[107]: starting version 215
[ 4.081993] random: systemd-udevd urandom read with 10 bits of entropy available
[ 4.938452] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.581384] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.819445] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 6.452137] systemd-udevd[188]: starting version 215
[ 6.808000] systemd-journald[184]: Received request to flush runtime journal from PID 1
[ 7.728730] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 7.916598] cfg80211: Calling CRDA to update world regulatory domain
[ 8.225647] rtl8192cu: Chip version 0x10
[ 8.395775] random: nonblocking pool is initialized
[ 8.431378] rtl8192cu: MAC address: 00:13:ef:c0:0b:5c
[ 8.431419] rtl8192cu: Board Type 0
[ 8.431568] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 8.431722] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 8.433090] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2
[ 8.433160] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[ 8.433172] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[ 8.433180] rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available
[ 8.479064] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.481708] usbcore: registered new interface driver rtl8192cu
[ 8.559187] cfg80211: World regulatory domain updated:
[ 8.559225] cfg80211: DFS Master region: unset
[ 8.559236] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.559251] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.559262] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.559273] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.559286] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.559298] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.559309] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.559319] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.559329] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.023202] net eth0: initializing cpsw version 1.12 (0)
[ 9.025643] net eth0: phy found : id is : 0x7c0f1
[ 9.025750] libphy: PHY 4a101000.mdio:01 not found
[ 9.033336] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 9.044979] base:of_property_match_string:1398: comparing cpts with fck
[ 9.045004] base:of_property_match_string:1398: comparing cpts with cpts
[ 9.045099] net eth0: BQL enabled
[ 9.051237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.098109] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.098346] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.714088] using random self ethernet address
[ 23.714119] using random host ethernet address
[ 23.714137] using host ethernet address: 6C:EC:EB:5C:4D:A7
[ 23.714149] using self ethernet address: 6C:EC:EB:5C:4D:A0
[ 23.715655] usb0: HOST MAC 6c:ec:eb:5c:4d:a7
[ 23.716090] usb0: MAC 6c:ec:eb:5c:4d:a0
[ 23.716153] using random self ethernet address
[ 23.716166] using random host ethernet address
[ 23.716260] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 23.716273] g_ether gadget: g_ether ready
[ 26.867318] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 2294.150157] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 2294.150200] bone_capemgr bone_capemgr: slot #4: override
[ 2294.150217] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 2294.150235] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 2294.150372] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 2294.150391] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 2294.151801] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 2294.164511] gpio-of-helper ocp:gpio_helper: ready
[ 2294.168943] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio' property of node '//fixedregulator@1[0]' - status (0)
[ 2294.169234] core:print_constraints:836: lz-codec-reg: no parameters
[ 2294.169327] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@1: lz-codec-reg supplying 0uV
[ 2294.173236] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 2294.187236] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 2294.234549] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 2294.234583] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 2294.240805] davinci_evm sound: snd_soc_register_card failed (-517)
[ 2294.255076] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio-reset' property of node '/ocp/i2c@4819c000/tlv320aic3104@0[0]' - status (0)
[ 2294.255140] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up IOVDD-supply from device tree
[ 2294.255247] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up DVDD-supply from device tree
[ 2294.255312] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up AVDD-supply from device tree
[ 2294.255381] core:of_get_regulator:142: tlv320aic3x-codec 2-0018: Looking up DRVDD-supply from device tree
[ 2294.255456] snd_soc_core:snd_soc_register_codec:3064: tlv320aic3x-codec 2-0018: codec register 2-0018
[ 2294.255493] snd_soc_core:snd_soc_register_dais:2590: tlv320aic3x-codec 2-0018: ASoC: dai register 2-0018 #1
[ 2294.255511] snd_soc_core:snd_soc_register_dais:2634: tlv320aic3x-codec 2-0018: ASoC: Registered DAI 'tlv320aic3x-hifi'
[ 2294.255530] snd_soc_core:snd_soc_register_codec:3138: tlv320aic3x-codec 2-0018: ASoC: Registered codec 'tlv320aic3x-codec.2-0018'
[ 2294.272552] base:of_property_match_string:1398: comparing tx with tx
[ 2294.272604] base:of_property_match_string:1398: comparing rx with tx
[ 2294.272616] base:of_property_match_string:1398: comparing rx with rx
[ 2294.272670] base:of_property_match_string:1398: comparing common with tx
[ 2294.272683] base:of_property_match_string:1398: comparing common with rx
[ 2294.272696] base:of_property_match_string:1398: comparing rx with tx
[ 2294.272706] base:of_property_match_string:1398: comparing rx with rx
[ 2294.279998] base:of_property_match_string:1398: comparing tx with tx
[ 2294.285315] snd_soc_core:snd_soc_register_dais:2590: davinci-mcasp 48038000.mcasp: ASoC: dai register 48038000.mcasp #1
[ 2294.285349] snd_soc_core:snd_soc_register_dais:2634: davinci-mcasp 48038000.mcasp: ASoC: Registered DAI '48038000.mcasp'
[ 2294.285507] snd_soc_core:snd_soc_add_platform:2892: davinci-mcasp 48038000.mcasp: ASoC: Registered platform '48038000.mcasp'
[ 2294.334313] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 2294.334653] snd_soc_core:snd_soc_dapm_new_dai_widgets:3494: tlv320aic3x-codec 2-0018: ASoC: adding Playback widget
[ 2294.334684] snd_soc_core:snd_soc_dapm_new_dai_widgets:3513: tlv320aic3x-codec 2-0018: ASoC: adding Capture widget
[ 2294.335242] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late -2
[ 2294.335263] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late -1
[ 2294.335277] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 0
[ 2294.335291] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 1
[ 2294.335304] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique EVM dai link 0 late 2
[ 2294.335345] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[ 2294.354337] snd_soc_core:soc_new_pcm:2510: davinci_evm sound: ASoC: registered pcm #0 AIC3X tlv320aic3x-hifi-0
[ 2294.357286] davinci_evm sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
[ 2294.357337] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Right ADC -> Capture
[ 2294.357359] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Left ADC -> Capture
[ 2294.357379] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Right DAC
[ 2294.357394] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Left DAC
Full dmesg 4.2.1-bone2:
# echo BB-ENABLE-PRU > $SLOTS
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.1-bone2 (root@rlmubuntu) (gcc version 4.9.3 20150413 (prerelease) (Linaro GCC 4.9-2015.05) ) #2 Tue Sep 29 14:16:52 PDT 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 24 MiB at 0x9e800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0abd818, node_mem_map de36d000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyO0,115200n8 dyndbg="file drivers/of/base.c +pflm; file sound* +pflm; file pinctrl/* +pflm; file drivers/gpio/* +pflm; file drivers/regulator* +pflm; file *cape* +pflm" root=UUID=69f859b1-c308-41c9-8ca7-a3d0042031e8 ro rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478032K/524288K available (6336K kernel code, 822K rwdata, 3468K rodata, 448K init, 856K bss, 21680K reserved, 24576K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
.text : 0xc0008000 - 0xc099b2d0 (9805 kB)
.init : 0xc099c000 - 0xc0a0c000 ( 448 kB)
.data : 0xc0a0c000 - 0xc0ad9ab0 ( 823 kB)
.bss : 0xc0adc000 - 0xc0bb2304 ( 857 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000027] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000038] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000282] Console: colour dummy device 80x30
[ 0.000305] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000311] This ensures that you still see kernel messages. Please
[ 0.000316] update your kernel commandline.
[ 0.000330] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.089215] pid_max: default: 32768 minimum: 301
[ 0.089326] Security Framework initialized
[ 0.089343] AppArmor: AppArmor disabled by boot time parameter
[ 0.089349] Yama: becoming mindful.
[ 0.089516] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089526] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090147] Initializing cgroup subsys blkio
[ 0.090168] Initializing cgroup subsys memory
[ 0.090204] Initializing cgroup subsys devices
[ 0.090218] Initializing cgroup subsys freezer
[ 0.090237] Initializing cgroup subsys net_cls
[ 0.090250] Initializing cgroup subsys perf_event
[ 0.090262] Initializing cgroup subsys net_prio
[ 0.090302] CPU: Testing write buffer coherency: ok
[ 0.090346] ftrace: allocating 31763 entries in 63 pages
[ 0.158246] Setting up static identity map for 0x800081c0 - 0x8000820c
[ 0.166787] devtmpfs: initialized
[ 0.179450] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.187298] omap_hwmod: tptc0 using broken dt data from edma
[ 0.187390] omap_hwmod: tptc1 using broken dt data from edma
[ 0.187471] omap_hwmod: tptc2 using broken dt data from edma
[ 0.191724] omap_hwmod: debugss: _wait_target_disable failed
[ 0.246132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.248053] xor: measuring software checksum speed
[ 0.339187] arm4regs : 1222.800 MB/sec
[ 0.439182] 8regs : 932.000 MB/sec
[ 0.539184] 32regs : 1057.200 MB/sec
[ 0.639182] neon : 1755.200 MB/sec
[ 0.639189] xor: using function: neon (1755.200 MB/sec)
[ 0.639342] pinctrl core: initialized pinctrl subsystem
[ 0.639854] core:print_constraints:844: regulator-dummy: no parameters
[ 0.640951] NET: Registered protocol family 16
[ 0.643873] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.647567] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.647707] OMAP GPIO hardware version 0.1
[ 0.648333] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.648838] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.649403] gpiolib:gpiochip_add:299: gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.654860] No ATAGs?
[ 0.654882] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.829209] raid6: int32x1 gen() 239 MB/s
[ 0.999203] raid6: int32x1 xor() 233 MB/s
[ 1.169297] raid6: int32x2 gen() 337 MB/s
[ 1.339207] raid6: int32x2 xor() 270 MB/s
[ 1.509323] raid6: int32x4 gen() 391 MB/s
[ 1.679282] raid6: int32x4 xor() 245 MB/s
[ 1.849340] raid6: int32x8 gen() 318 MB/s
[ 2.019194] raid6: int32x8 xor() 213 MB/s
[ 2.189208] raid6: neonx1 gen() 1460 MB/s
[ 2.359190] raid6: neonx2 gen() 1870 MB/s
[ 2.529196] raid6: neonx4 gen() 1965 MB/s
[ 2.699255] raid6: neonx8 gen() 700 MB/s
[ 2.699262] raid6: using algorithm neonx4 gen() 1965 MB/s
[ 2.699268] raid6: using intx1 recovery algorithm
[ 2.705711] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 2.706137] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]'
[ 2.706315] core:print_constraints:844: vmmcsd_fixed: 3300 mV
[ 2.706373] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@0: vmmcsd_fixed supplying 3300000uV
[ 2.709583] SCSI subsystem initialized
[ 2.709858] libata version 3.00 loaded.
[ 2.710135] usbcore: registered new interface driver usbfs
[ 2.710204] usbcore: registered new interface driver hub
[ 2.710269] usbcore: registered new device driver usb
[ 2.710708] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 2.710749] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 2.710831] media: Linux media interface: v0.10
[ 2.710880] Linux video capture interface: v2.00
[ 2.710962] pps_core: LinuxPPS API ver. 1 registered
[ 2.710968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.710992] PTP clock support registered
[ 2.711541] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 2.712506] NetLabel: Initializing
[ 2.712515] NetLabel: domain hash size = 128
[ 2.712520] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.712592] NetLabel: unlabeled traffic allowed by default
[ 2.713124] clocksource: Switched to clocksource timer1
[ 2.785688] NET: Registered protocol family 2
[ 2.786350] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.786395] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.786433] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.786497] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 2.786513] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 2.786673] NET: Registered protocol family 1
[ 2.787085] RPC: Registered named UNIX socket transport module.
[ 2.787093] RPC: Registered udp transport module.
[ 2.787098] RPC: Registered tcp transport module.
[ 2.787103] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.787512] Unpacking initramfs...
[ 3.061275] Freeing initrd memory: 4380K (cfbb9000 - d0000000)
[ 3.061727] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
[ 3.061765] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 3.063838] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 3.063949] audit: initializing netlink subsys (disabled)
[ 3.064031] audit: type=2000 audit(3.020:1): initialized
[ 3.064919] zpool: loaded
[ 3.065155] VFS: Disk quotas dquot_6.6.0
[ 3.065209] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.065714] NFS: Registering the id_resolver key type
[ 3.065767] Key type id_resolver registered
[ 3.065772] Key type id_legacy registered
[ 3.065796] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.066044] fuse init (API version 7.23)
[ 3.066236] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.070371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.070512] io scheduler noop registered
[ 3.070525] io scheduler deadline registered
[ 3.070560] io scheduler cfq registered (default)
[ 3.071621] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 3.072989] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 3.075241] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a 8250
[ 3.075707] console [ttyS0] enabled
[ 3.076662] [drm] Initialized drm 1.1.0 20060810
[ 3.077105] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.077685] usbcore: registered new interface driver dln2
[ 3.079708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.079737] ehci-platform: EHCI generic platform driver
[ 3.079853] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.080975] gpiolib:__gpiod_get_index:1986: am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset
[ 3.080992] gpiolib:__gpiod_get_index:1991: am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 3.081008] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.081020] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.081031] gpiolib:__gpiod_get_index:2004: am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 3.081043] gpiolib:__gpiod_get_index:2009: am335x-phy-driver 47401300.usb-phy: lookup for GPIO reset failed
[ 3.081055] gpiolib:__gpiod_get_index:1986: am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect
[ 3.081065] gpiolib:__gpiod_get_index:1991: am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 3.081076] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.081087] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 3.081098] gpiolib:__gpiod_get_index:2004: am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 3.081108] gpiolib:__gpiod_get_index:2009: am335x-phy-driver 47401300.usb-phy: lookup for GPIO vbus-detect failed
[ 3.081158] core:of_get_regulator:143: am335x-phy-driver 47401300.usb-phy: Looking up vcc-supply from device tree
[ 3.081172] core:of_get_regulator:150: am335x-phy-driver 47401300.usb-phy: Looking up vcc-supply property in node /ocp/usb@47400000/usb-phy@47401300 failed
[ 3.081182] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 3.083097] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.083111] musb-hdrc: MHDRC RTL version 2.0
[ 3.083190] musb-hdrc: setup fifo_mode 4
[ 3.083208] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.084131] gpiolib:__gpiod_get_index:1986: am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset
[ 3.084147] gpiolib:__gpiod_get_index:1991: am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 3.084162] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.084173] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.084184] gpiolib:__gpiod_get_index:2004: am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 3.084196] gpiolib:__gpiod_get_index:2009: am335x-phy-driver 47401b00.usb-phy: lookup for GPIO reset failed
[ 3.084207] gpiolib:__gpiod_get_index:1986: am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect
[ 3.084217] gpiolib:__gpiod_get_index:1991: am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 3.084228] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.084239] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 3.084250] gpiolib:__gpiod_get_index:2004: am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 3.084260] gpiolib:__gpiod_get_index:2009: am335x-phy-driver 47401b00.usb-phy: lookup for GPIO vbus-detect failed
[ 3.084298] core:of_get_regulator:143: am335x-phy-driver 47401b00.usb-phy: Looking up vcc-supply from device tree
[ 3.084311] core:of_get_regulator:150: am335x-phy-driver 47401b00.usb-phy: Looking up vcc-supply property in node /ocp/usb@47400000/usb-phy@47401b00 failed
[ 3.084320] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 3.086109] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.086122] musb-hdrc: MHDRC RTL version 2.0
[ 3.086128] musb-hdrc: setup fifo_mode 4
[ 3.086141] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.086227] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.086466] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.086635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.086646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.086654] usb usb1: Product: MUSB HDRC host driver
[ 3.086661] usb usb1: Manufacturer: Linux 4.2.1-bone2 musb-hcd
[ 3.086669] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.087232] hub 1-0:1.0: USB hub found
[ 3.087266] hub 1-0:1.0: 1 port detected
[ 3.095259] mousedev: PS/2 mouse device common for all mice
[ 3.096446] omap_rtc 44e3e000.rtc: already running
[ 3.096770] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.097236] i2c /dev entries driver
[ 3.098857] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.099204] sdhci: Secure Digital Host Controller Interface driver
[ 3.099211] sdhci: Copyright(c) Pierre Ossman
[ 3.099524] gpiolib:__gpiod_get_index:1986: omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd
[ 3.099537] gpiolib:__gpiod_get_index:1991: omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 3.099562] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0)
[ 3.099612] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.099624] gpiolib:__gpiod_get_index:1986: omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp
[ 3.099634] gpiolib:__gpiod_get_index:1991: omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 3.099646] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'
[ 3.099657] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'
[ 3.099668] gpiolib:__gpiod_get_index:2004: omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup
[ 3.099679] gpiolib:__gpiod_get_index:2009: omap_hsmmc 48060000.mmc: lookup for GPIO wp failed
[ 3.104290] core:of_get_regulator:143: omap_hsmmc 48060000.mmc: Looking up vmmc-supply from device tree
[ 3.104384] core:of_get_regulator:143: omap_hsmmc 48060000.mmc: Looking up vmmc_aux-supply from device tree
[ 3.104399] core:of_get_regulator:150: omap_hsmmc 48060000.mmc: Looking up vmmc_aux-supply property in node /ocp/mmc@48060000 failed
[ 3.104413] core:of_get_regulator:143: omap_hsmmc 48060000.mmc: Looking up pbias-supply from device tree
[ 3.104425] core:of_get_regulator:150: omap_hsmmc 48060000.mmc: Looking up pbias-supply property in node /ocp/mmc@48060000 failed
[ 3.143625] gpiolib:__gpiod_get_index:1986: omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd
[ 3.143641] gpiolib:__gpiod_get_index:1991: omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 3.143655] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 3.143666] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 3.143678] gpiolib:__gpiod_get_index:2004: omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 3.143689] gpiolib:__gpiod_get_index:2009: omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed
[ 3.143701] gpiolib:__gpiod_get_index:1986: omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp
[ 3.143710] gpiolib:__gpiod_get_index:1991: omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 3.143721] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 3.143731] gpiolib_of:of_get_named_gpiod_flags:94: of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 3.143741] gpiolib:__gpiod_get_index:2004: omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 3.143751] gpiolib:__gpiod_get_index:2009: omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed
[ 3.143970] core:of_get_regulator:143: omap_hsmmc 481d8000.mmc: Looking up vmmc-supply from device tree
[ 3.144073] core:of_get_regulator:143: omap_hsmmc 481d8000.mmc: Looking up vmmc_aux-supply from device tree
[ 3.144087] core:of_get_regulator:150: omap_hsmmc 481d8000.mmc: Looking up vmmc_aux-supply property in node /ocp/mmc@481d8000 failed
[ 3.144100] core:of_get_regulator:143: omap_hsmmc 481d8000.mmc: Looking up pbias-supply from device tree
[ 3.144112] core:of_get_regulator:150: omap_hsmmc 481d8000.mmc: Looking up pbias-supply property in node /ocp/mmc@481d8000 failed
[ 3.183442] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.183487] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.183575] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.184495] usbcore: registered new interface driver usbhid
[ 3.184503] usbhid: USB HID core driver
[ 3.184723] ashmem: initialized
[ 3.186339] oprofile: using arm/armv7
[ 3.186821] NET: Registered protocol family 10
[ 3.188669] mip6: Mobile IPv6
[ 3.188689] NET: Registered protocol family 17
[ 3.188791] Key type dns_resolver registered
[ 3.188803] mpls_gso: MPLS GSO support
[ 3.189069] omap_voltage_late_init: Voltage driver support not added
[ 3.197953] core:of_get_regulator:143: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.198007] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[ 3.198019] cpu cpu0: cpu0 clock notifier not ready, retry
[ 3.203796] ThumbEE CPU extension supported.
[ 3.203819] Registering SWP/SWPB emulation handler
[ 3.204712] registered taskstats version 1
[ 3.204799] zswap: loading zswap
[ 3.213205] zpool: no driver for type zbud
[ 3.217333] zswap: zbud zpool not available
[ 3.221528] zswap: zpool creation failed
[ 3.226387] Btrfs loaded
[ 3.242111] Key type encrypted registered
[ 3.257304] mmc1: MAN_BKOPS_EN bit is not set
[ 3.261689] mmc1: new high speed MMC card at address 0001
[ 3.262187] mmcblk0: mmc1:0001 MMC04G 3.60 GiB
[ 3.262363] mmcblk0boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 3.262528] mmcblk0boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 3.263546] mmcblk0: p1
[ 3.263970] core:print_constraints:844: vdds_dpr: at 1500 mV
[ 3.264801] core:print_constraints:844: vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 3.265651] core:print_constraints:844: vdd_core: 925 <--> 1150 mV at 1125 mV
[ 3.266436] core:print_constraints:844: vio,vrtc,vdds: at 1800 mV
[ 3.267238] core:print_constraints:844: vdd_3v3aux: at 3300 mV
[ 3.268036] core:print_constraints:844: vdd_1v8: 1800 mV
[ 3.268800] core:print_constraints:844: vdd_3v3a: at 3300 mV
[ 3.269465] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.269899] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.269934] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.271187] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.271484] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.271779] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.272055] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.272080] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.272395] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.278538] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,00C0,3214BBBK4221'
[ 3.278564] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.278581] base:of_property_match_string:1398: comparing slot0 with baseboard
[ 3.278589] base:of_property_match_string:1398: comparing slot0 with slot0
[ 3.333137] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.338921] base:of_property_match_string:1398: comparing slot1 with baseboard
[ 3.338929] base:of_property_match_string:1398: comparing slot1 with slot0
[ 3.338937] base:of_property_match_string:1398: comparing slot1 with slot1
[ 3.393139] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.398927] base:of_property_match_string:1398: comparing slot2 with baseboard
[ 3.398935] base:of_property_match_string:1398: comparing slot2 with slot0
[ 3.398944] base:of_property_match_string:1398: comparing slot2 with slot1
[ 3.398951] base:of_property_match_string:1398: comparing slot2 with slot2
[ 3.453134] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.458909] base:of_property_match_string:1398: comparing slot3 with baseboard
[ 3.458918] base:of_property_match_string:1398: comparing slot3 with slot0
[ 3.458925] base:of_property_match_string:1398: comparing slot3 with slot1
[ 3.458933] base:of_property_match_string:1398: comparing slot3 with slot2
[ 3.458941] base:of_property_match_string:1398: comparing slot3 with slot3
[ 3.482907] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
[ 3.490085] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.495927] bone_capemgr bone_capemgr: initialized OK.
[ 3.496136] core:of_get_regulator:143: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.496382] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.496554] core:of_get_regulator:143: cpu cpu0: Looking up cpu0-supply from device tree
[ 3.496769] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.511091] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.553187] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.553200] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.553497] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 3.553520] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffe]
[ 3.558462] libphy: 4a101000.mdio: probed
[ 3.558488] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.559162] cpsw 4a100000.ethernet: Detected MACID = 6c:ec:eb:5c:4d:a5
[ 3.559187] base:of_property_match_string:1398: comparing fck with fck
[ 3.560459] omap_rtc 44e3e000.rtc: setting system clock to 2015-09-29 22:39:00 UTC (1443566340)
[ 3.560484] of_cfs_init
[ 3.560560] of_cfs_init: OK
[ 3.564008] PM: Hibernation image not present or could not be loaded.
[ 3.564884] Freeing unused kernel memory: 448K (c099c000 - c0a0c000)
[ 3.644601] systemd-udevd[99]: starting version 215
[ 3.646384] random: systemd-udevd urandom read with 9 bits of entropy available
[ 3.650088] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176
[ 3.650106] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.650115] usb 1-1: Product: 802.11n WLAN Adapter
[ 3.650123] usb 1-1: Manufacturer: Realtek
[ 3.650131] usb 1-1: SerialNumber: 00e04c000001
[ 4.247228] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.728042] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.907425] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 5.267481] systemd-udevd[173]: starting version 215
[ 5.727030] systemd-journald[165]: Received request to flush runtime journal from PID 1
[ 6.010360] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@2[0]' - status (0)
[ 6.010640] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@3[0]' - status (0)
[ 6.010794] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@4[0]' - status (0)
[ 6.010931] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@5[0]' - status (0)
[ 6.257660] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 6.481340] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 6.503977] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 6.659784] rtl8192cu: Chip version 0x10
[ 6.715682] random: nonblocking pool is initialized
[ 6.725741] rtl8192cu: MAC address: 00:13:ef:c0:0b:5c
[ 6.725772] rtl8192cu: Board Type 0
[ 6.725885] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 6.725998] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 6.726869] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2
[ 6.726883] usb 1-1: Falling back to user helper
[ 6.761291] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.762431] usbcore: registered new interface driver rtl8192cu
[ 6.837295] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[ 6.837316] usb 1-1: Falling back to user helper
[ 6.854624] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[ 6.854643] rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available
[ 6.991282] cfg80211: World regulatory domain updated:
[ 6.991309] cfg80211: DFS Master region: unset
[ 6.991316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.991327] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.991336] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.991343] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.991354] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6.991363] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6.991371] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.991379] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.991387] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.291408] net eth0: initializing cpsw version 1.12 (0)
[ 7.294970] net eth0: phy found : id is : 0x7c0f1
[ 7.295053] libphy: PHY 4a101000.mdio:01 not found
[ 7.299872] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 7.310939] base:of_property_match_string:1398: comparing cpts with fck
[ 7.310958] base:of_property_match_string:1398: comparing cpts with cpts
[ 7.311031] net eth0: BQL enabled
[ 7.315133] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.316522] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 10.318584] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.666288] using random self ethernet address
[ 17.666310] using random host ethernet address
[ 17.666322] using host ethernet address: 6C:EC:EB:5C:4D:A7
[ 17.666330] using self ethernet address: 6C:EC:EB:5C:4D:A0
[ 17.667129] usb0: HOST MAC 6c:ec:eb:5c:4d:a7
[ 17.667222] usb0: MAC 6c:ec:eb:5c:4d:a0
[ 17.667254] using random self ethernet address
[ 17.667263] using random host ethernet address
[ 17.667356] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 17.667365] g_ether gadget: g_ether ready
[ 20.770482] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 1144.730462] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 1144.730492] bone_capemgr bone_capemgr: slot #4: override
[ 1144.730506] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 1144.730521] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 1144.730626] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 1144.730643] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 1144.736281] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 1144.745769] gpio-of-helper ocp:gpio_helper: ready
[ 1144.746227] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio' property of node '//fixedregulator@1[0]' - status (0)
[ 1144.746441] core:print_constraints:844: lz-codec-reg: no parameters
[ 1144.746501] fixed:reg_fixed_voltage_probe:199: reg-fixed-voltage fixedregulator@1: lz-codec-reg supplying 0uV
[ 1144.749082] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 1144.760237] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 1144.894483] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 1144.900819] davinci_evm sound: snd_soc_register_card failed (-517)
[ 1144.909250] gpiolib_of:of_get_named_gpiod_flags:103: of_get_named_gpiod_flags: parsed 'gpio-reset' property of node '/ocp/i2c@4819c000/tlv320aic3104@0[0]' - status (0)
[ 1144.909295] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up IOVDD-supply from device tree
[ 1144.909349] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up DVDD-supply from device tree
[ 1144.909397] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up AVDD-supply from device tree
[ 1144.909432] core:of_get_regulator:143: tlv320aic3x-codec 2-0018: Looking up DRVDD-supply from device tree
[ 1144.926564] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 1144.932889] davinci_evm sound: snd_soc_register_card failed (-517)
[ 1144.944102] base:of_property_match_string:1398: comparing tx with tx
[ 1144.944142] base:of_property_match_string:1398: comparing rx with tx
[ 1144.944150] base:of_property_match_string:1398: comparing rx with rx
[ 1144.944187] base:of_property_match_string:1398: comparing common with tx
[ 1144.944195] base:of_property_match_string:1398: comparing common with rx
[ 1144.944205] base:of_property_match_string:1398: comparing rx with tx
[ 1144.944213] base:of_property_match_string:1398: comparing rx with rx
[ 1144.946502] base:of_property_match_string:1398: comparing tx with tx
[ 1144.948166] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[ 1144.960896] davinci_evm sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok