Add Oscillator_SMD_Fox_FT5H_5.0x3.2mm

[bitglue]

Datasheet: https://www.mouser.com/datasheet/2/160/T5HN_T5HV-1662393.pdf

For the 3D model I supplemented the dimensions with measurements taken
from an actual device. In reality, the pads are a little bigger, and the
thickness a little less than the datasheet says.

Symbol: KiCad/kicad-symbols#2754
Footprint: KiCad/kicad-footprints#2293
3D model source: KiCad/kicad-packages3D-source#282

---

Thanks for creating a pull request to contribute to the KiCad libraries!
Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.

To speed up integration of your PR, please check the following items as you complete them:

• A screenshot of the model(s) aligned with KiCad footprint(s)
• Source files are contributed on the apropriate location
  • Link to the package3d-source pull request or to the script pull request
• Step model submitted in 1:1 scale
• WRL model submitted in 1:2.54 scale
• 3D model alignment checked against KiCad footprint
• WRL model uses correct material properties
• Geometry check performed on the model

---

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).

[mywave82]

Works OK for me. Lands perfect on the board with the correct rotation.

[aris-kimi]

Thanks @bitglue , merging.