[DOC] Add tutorial on warm-start

docs/make.jl

@@ -17,6 +17,9 @@ makedocs(
         "Installation" => "installation.md",
         "Quickstart" => "quickstart.md",
         "Options" => "options.md",
+        "Tutorials" => [
+            "Warm-start" => "tutorials/warmstart.md",
+        ],
         "Manual" => [
             "IPM solver" => "man/solver.md",
             "KKT systems" => "man/kkt.md",

docs/src/tutorials/hs15.jl

@@ -0,0 +1,92 @@
+using NLPModels
+
+struct HS15Model{T} <: NLPModels.AbstractNLPModel{T,Vector{T}}
+    meta::NLPModels.NLPModelMeta{T, Vector{T}}
+    params::Vector{T}
+    counters::NLPModels.Counters
+end
+
+function HS15Model(;T = Float64, x0=zeros(T,2), y0=zeros(T,2))
+    return HS15Model(
+        NLPModels.NLPModelMeta(
+            2,     #nvar
+            ncon = 2,
+            nnzj = 4,
+            nnzh = 3,
+            x0 = x0,
+            y0 = y0,
+            lvar = T[-Inf, -Inf],
+            uvar = T[0.5, Inf],
+            lcon = T[1.0, 0.0],
+            ucon = T[Inf, Inf],
+            minimize = true
+        ),
+        T[100, 1],
+        NLPModels.Counters()
+    )
+end
+
+function NLPModels.obj(nlp::HS15Model, x::AbstractVector)
+    p1, p2 = nlp.params
+    return p1 * (x[2] - x[1]^2)^2 + (p2 - x[1])^2
+end
+
+function NLPModels.grad!(nlp::HS15Model{T}, x::AbstractVector, g::AbstractVector) where T
+    p1, p2 = nlp.params
+    z = x[2] - x[1]^2
+    g[1] = -T(4) * p1 * z * x[1] - T(2) * (p2 - x[1])
+    g[2] = T(2) * p1 * z
+    return g
+end
+
+function NLPModels.cons!(nlp::HS15Model, x::AbstractVector, c::AbstractVector)
+    c[1] = x[1] * x[2]
+    c[2] = x[1] + x[2]^2
+    return c
+end
+
+function NLPModels.jac_structure!(nlp::HS15Model, I::AbstractVector{T}, J::AbstractVector{T}) where T
+    copyto!(I, [1, 1, 2, 2])
+    copyto!(J, [1, 2, 1, 2])
+    return I, J
+end
+
+function NLPModels.jac_coord!(nlp::HS15Model{T}, x::AbstractVector, J::AbstractVector) where T
+    J[1] = x[2]    # (1, 1)
+    J[2] = x[1]    # (1, 2)
+    J[3] = T(1)    # (2, 1)
+    J[4] = T(2)*x[2]  # (2, 2)
+    return J
+end
+
+function NLPModels.jprod!(nlp::HS15Model{T}, x::AbstractVector, v::AbstractVector, jv::AbstractVector) where T
+    jv[1] = x[2] * v[1] + x[1] * v[2]
+    jv[2] = v[1] + T(2) * x[2] * v[2]
+    return jv
+end
+
+function NLPModels.jtprod!(nlp::HS15Model{T}, x::AbstractVector, v::AbstractVector, jv::AbstractVector) where T
+    jv[1] = x[2] * v[1] + v[2]
+    jv[2] = x[1] * v[1] + T(2) * x[2] * v[2]
+    return jv
+end
+
+function NLPModels.hess_structure!(nlp::HS15Model, I::AbstractVector{T}, J::AbstractVector{T}) where T
+    copyto!(I, [1, 2, 2])
+    copyto!(J, [1, 1, 2])
+    return I, J
+end
+
+function NLPModels.hess_coord!(nlp::HS15Model{T}, x, y, H::AbstractVector; obj_weight=T(1)) where T
+    p1, p2 = nlp.params
+    # Objective
+    H[1] = obj_weight * (-T(4) * p1 * x[2] + T(12) * p1 * x[1]^2 + T(2))
+    H[2] = obj_weight * (-T(4) * p1 * x[1])
+    H[3] = obj_weight * T(2) * p1
+    # First constraint
+    H[2] += y[1] * T(1)
+    # Second constraint
+    H[3] += y[2] * T(2)
+    return H
+end
+

docs/src/tutorials/warmstart.md

@@ -0,0 +1,170 @@
+# Warmstarting MadNLP
+
+```@meta
+CurrentModule = MadNLP
+```
+```@setup warmstart
+using NLPModels
+using MadNLP
+include("hs15.jl")
+
+```
+
+We use a parameterized version of the instance HS15
+used in the [introduction](../quickstart.md). This updated
+version of `HS15Model` stores the parameters of the model in an
+attribute `nlp.params`:
+```@example warmstart
+
+nlp = HS15Model()
+println(nlp.params)
+```
+By default the parameters are set to `[100.0, 1.0]`.
+In a first solve, we find a solution associated to these parameters.
+We want to warmstart MadNLP from the solution found in the first solve,
+after a small update in the problem's parameters.
+
+!!! info
+    It is known that the interior-point method has a poor
+    support of warmstarting, on the contrary to active-set methods.
+    However, if the parameter changes remain reasonable and do not lead
+    to significant changes in the active set, warmstarting the
+    interior-point algorithm can significantly reduces the total number of barrier iterations
+    in the second solve.
+
+!!! warning
+    The warm-start described in this tutorial remains basic.
+    Its main application is updating the solution of a parametric
+    problem after an update in the parameters. **The warm-start
+    always assumes that the structure of the problem remains the same between
+    two consecutive solves**.
+    MadNLP cannot be warm-started if variables or constraints
+    are added to the problem.
+
+## Naive solution: starting from the previous solution
+By default, MadNLP starts its interior-point algorithm
+at the primal variable stored in `nlp.meta.x0`. We can
+access this attribute using the function `get_x0`:
+```@example warmstart
+x0 = NLPModels.get_x0(nlp)
+
+```
+Here, we observe that the initial solution is `[0, 0]`.
+
+We solve the problem using the function [`madnlp`](@ref):
+```@example warmstart
+results = madnlp(nlp)
+nothing
+```
+MadNLP converges in 19 barrier iterations.  The solution is:
+```@example warmstart
+println("Objective: ", results.objective)
+println("Solution:  ", results.solution)
+```
+
+### Solution 1: updating the starting solution
+We have found a solution to the problem. Now, what happens if we update
+the parameters inside `nlp`?
+```@example warmstart
+nlp.params .= [101.0, 1.1]
+```
+As MadNLP starts the algorithm at `nlp.meta.x0`, we pass
+the previous solution to the initial vector:
+```@example warmstart
+copyto!(NLPModels.get_x0(nlp), results.solution)
+```
+Solving the problem again with MadNLP, we observe that MadNLP converges
+in only 6 iterations:
+```@example warmstart
+results_new = madnlp(nlp)
+nothing
+
+```
+By decreasing the initial barrier parameter, we can reduce the total number
+of iterations to 5:
+```@example warmstart
+results_new = madnlp(nlp; mu_init=1e-7)
+nothing
+
+```
+
+The final solution is slightly different from the previous one, as we have
+updated the parameters inside the model `nlp`:
+```@example warmstart
+results_new.solution
+
+```
+
+!!! info
+    Similarly as with the primal solution, we can pass the initial dual solution to MadNLP
+    using the function `get_y0`. We can overwrite the value of `y0` in `nlp` using:
+    ```
+    copyto!(NLPModels.get_y0(nlp), results.multipliers)
+    ```
+    In our particular example, setting the dual multipliers has only a minor influence
+    on the convergence of the algorithm.
+
+
+## Advanced solution: keeping the solver in memory
+
+The previous solution works, but is wasteful in resource: each time we call
+the function [`madnlp`](@ref) we create a new instance of [`MadNLPSolver`](@ref),
+leading to a significant number of memory allocations. A workaround is to keep
+the solver in memory to have more fine-grained control on the warm-start.
+
+We start by creating a new model `nlp` and we instantiate a new instance
+of [`MadNLPSolver`](@ref) attached to this model:
+```@example warmstart
+nlp = HS15Model()
+solver = MadNLP.MadNLPSolver(nlp)
+```
+Note that
+```@example warmstart
+nlp === solver.nlp
+```
+Hence, updating the parameter values in `nlp` will automatically update the
+parameters in the solver.
+
+We solve the problem using the function [`solve!`](@ref):
+```@example warmstart
+results = MadNLP.solve!(solver)
+```
+Before warmstarting MadNLP, we proceed as before and update the parameters
+and the primal solution in `nlp`:
+```@example warmstart
+nlp.params .= [101.0, 1.1]
+copyto!(NLPModels.get_x0(nlp), results.solution)
+```
+MadNLP stores in memory the dual solutions computed during the first solve.
+One can access to the (scaled) multipliers as
+```@example warmstart
+solver.y
+```
+and to the multipliers of the bound constraints with
+```@example warmstart
+[solver.zl.values solver.zu.values]
+```
+
+!!! warning
+    If we call the function [`solve!`](@ref) a second-time,
+    MadNLP will use the following rule:
+    - The initial primal solution is copied from `NLPModels.get_x0(nlp)`
+    - The initial dual solution is directly taken from the values specified
+      in `solver.y`, `solver.zl` and `solver.zu`.
+      (MadNLP is not using the values stored in `nlp.meta.y0` in the second solve).
+
+As before, it is advised to decrease the initial barrier parameter:
+if the initial point is close enough to the solution, this reduces drastically
+the total number of iterations.
+We solve the problem again using:
+```@example warmstart
+MadNLP.solve!(solver; mu_init=1e-7)
+nothing
+```
+Three observations are in order:
+- The iteration count starts directly from the previous count (as stored in `solver.cnt.k`).
+- MadNLP converges in only 4 iterations.
+- The factorization stored in `solver` is directly re-used, leading to significant savings.
+  As a consequence, the warm-start does not work if the structure of the problem changes between
+  the first and the second solve (e.g, if variables or constraints are added to the constraints).
+