moxa-uart-control

moxa-uart-control is a C library for getting and setting UART ports mode.

Build

This project use autotools as buildsystem. You can build this project by the following commands:

• If the build target architecture is x86_64

   # ./autogen.sh --host=x86_64-linux-gnu --includedir=/usr/include/moxa --libdir=/usr/lib/x86_64-linux-gnu --sbindir=/sbin
   # make
   # make install
  

• If the build target architecture is armhf

   # ./autogen.sh --host=arm-linux-gnueabihf --includedir=/usr/include/moxa --libdir=/usr/lib/arm-linux-gnueabihf --sbindir=/sbin
   # make
   # make install
  

The autogen script will execute ./configure and pass all the command-line arguments to it.

Usage of mx-uart-ctl

Usage:
	mx-uart-ctl -p <port_number> [-m <uart_mode>]

OPTIONS:
	-p <port_number>
		Set target port.
	-m <uart_mode>
		Set target port to uart_mode
		0 --> set to RS232 mode
		1 --> set to RS485-2W mode
		2 --> set to RS422 mode
		3 --> set to RS485-4W mode

Example:
	Get mode from port 0
	# mx-uart-ctl -p 0

	Set port 1 to mode RS232
	# mx-uart-ctl -p 1 -m 0

Documentation

Config Example

API Reference