Skip to content

Home

Jump to bottom
RalfJL edited this page Jun 18, 2020 · 3 revisions

Please see the Readme on the code page for Features and Limitations

My Setup

MySetup

  • The ESP32 is mounted on a custom build PCB that I created with Fritzing.
  • The board draws its power directly from the load output of the MPPT75-15.
    Maybe I will attach it directly to the battery to receive data even if the MPPT turns off the output.
  • There are two DS18 OneWire temperature sensors on the bottom.
    One will be attached to the back of the MPPT, the other will be attached to the battery.
  • The VE.Direct JST connector cable is extended and directly soldered to the input ( my MPPT75 is a 3V device)

Clone this wiki locally