Use long for deep sleep so that examples work with longer deepsleep times

examples/Inkplate10/Advanced/DeepSleep/Inkplate10_Partial_Update_With_Deep_Sleep/Inkplate10_Partial_Update_With_Deep_Sleep.ino

@@ -29,7 +29,7 @@
 #include "driver/rtc_io.h" // Include ESP32 library for RTC pin I/O (needed for rtc_gpio_isolate() function)
 #include <rom/rtc.h>       // Include ESP32 library for RTC (needed for rtc_get_reset_reason() function)
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  10      // Time how long ESP32 will be in deep sleep (in seconds). In this case 10 seconds.
 
 Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and also set library into 1-bit mode (BW)

examples/Inkplate10/Advanced/DeepSleep/Inkplate10_Simple_Deep_Sleep/Inkplate10_Simple_Deep_Sleep.ino

@@ -31,7 +31,7 @@ const uint8_t *pictures[] = {picture1, picture2,
                              picture3}; // This array of pinters holds address of every picture in the memory,
                                         // so we can easly select it by selecting index in array
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  20      // How long ESP32 will be in deep sleep (in seconds)
 RTC_DATA_ATTR int slide = 0;
 

examples/Inkplate10/Advanced/DeepSleep/Inkplate10_Wake_Up_Button/Inkplate10_Wake_Up_Button.ino

@@ -22,7 +22,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30
 

examples/Inkplate10/Advanced/DeepSleep/Inkplate10_Wake_Up_On_Touchpads/Inkplate10_Wake_Up_On_Touchpads.ino

@@ -20,7 +20,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30
 

examples/Inkplate5/Advanced_Inkplate_Features/Inkplate_Low_Power/Inkplate_Low_Power.ino

@@ -30,7 +30,7 @@
 const uint8_t *pictures[] = {pic1, pic2, pic3}; // This array of pinters holds address of every picture in the memory,
                                                 // so we can easly select it by selecting index in array
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  20      // How long ESP32 will be in deep sleep (in seconds)
 RTC_DATA_ATTR int slide = 0;
 

examples/Inkplate5/Advanced_Inkplate_Features/Inkplate_Partial_Update_With_Deep_Sleep/Inkplate_Partial_Update_With_Deep_Sleep.ino

@@ -29,7 +29,7 @@
 #include "driver/rtc_io.h" // Include ESP32 library for RTC pin I/O (needed for rtc_gpio_isolate() function)
 #include <rom/rtc.h>       // Include ESP32 library for RTC (needed for rtc_get_reset_reason() function)
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  10      // Time how long ESP32 will be in deep sleep (in seconds). In this case 10 seconds.
 
 Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and also set library into 1-bit mode (BW)

examples/Inkplate5/Advanced_Inkplate_Features/Inkplate_Wake_Up_On_Touchpads/Inkplate_Wake_Up_On_Touchpads.ino

@@ -20,7 +20,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30
 

examples/Inkplate6/Advanced/DeepSleep/Inkplate6_Partial_Update_With_Deep_Sleep/Inkplate6_Partial_Update_With_Deep_Sleep.ino

@@ -29,7 +29,7 @@
 #include "driver/rtc_io.h" // Include ESP32 library for RTC pin I/O (needed for rtc_gpio_isolate() function)
 #include <rom/rtc.h>       // Include ESP32 library for RTC (needed for rtc_get_reset_reason() function)
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  10      // Time how long ESP32 will be in deep sleep (in seconds). In this case 10 seconds.
 
 Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and also set library into 1-bit mode (BW)

examples/Inkplate6/Advanced/DeepSleep/Inkplate6_Simple_Deep_Sleep/Inkplate6_Simple_Deep_Sleep.ino

@@ -30,7 +30,7 @@
 const uint8_t *pictures[] = {pic1, pic2, pic3}; // This array of pinters holds address of every picture in the memory,
                                                 // so we can easly select it by selecting index in array
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  20      // How long ESP32 will be in deep sleep (in seconds)
 RTC_DATA_ATTR int slide = 0;
 

examples/Inkplate6/Advanced/DeepSleep/Inkplate6_Wake_Up_Button/Inkplate6_Wake_Up_Button.ino

@@ -22,7 +22,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30
 

examples/Inkplate6/Advanced/DeepSleep/Inkplate6_Wake_Up_On_Touchpads/Inkplate6_Wake_Up_On_Touchpads.ino

@@ -20,7 +20,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30
 

examples/Inkplate6COLOR/Advanced/DeepSleep/Inkplate6COLOR_Simple_Deep_Sleep/Inkplate6COLOR_Simple_Deep_Sleep.ino

@@ -31,7 +31,7 @@ const uint8_t *pictures[] = {picture1, picture2,
                              picture3}; // This array of pinters holds address of every picture in the memory,
                                         // so we can easly select it by selecting index in array
 
-#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
+#define uS_TO_S_FACTOR 1000000ULL // Conversion factor for micro seconds to seconds
 #define TIME_TO_SLEEP  20      // How long ESP32 will be in deep sleep (in seconds)
 RTC_DATA_ATTR int slide = 0;
 

examples/Inkplate6COLOR/Advanced/DeepSleep/Inkplate6COLOR_Wake_Up_Button/Inkplate6COLOR_Wake_Up_Button.ino

@@ -21,7 +21,7 @@
 #include <Inkplate.h>
 
 // Conversion factor for micro seconds to seconds
-#define uS_TO_S_FACTOR 1000000
+#define uS_TO_S_FACTOR 1000000ULL
 // Time ESP32 will go to sleep (in seconds)
 #define TIME_TO_SLEEP 30