# miksible                      

miksible is a word that i created for combinig MikroTik and Ansible, with miksible, configuring mikrotik devices is not boring anymore :0

## Requirements

- Ansible (obviously) 
- `community.routeros` collection installed
- A MikroTik device

## Inventory

The playbook is intended to run against MikroTik routers defined in an Ansible inventory file. An example of a basic inventory (`inventory.yml`):

```yaml
[mikros]
mikrotik1 ansible_host=192.168.1.2
mikrotik2 ansible_host=192.168.1.3
mikrotik3 ansible_host=192.168.1.4

Variables

The following variables can be customized in the playbook:

• network1: Network for the first LAN (default: 172.16.100.0/24)
• network1_interface: IP address for the first LAN interface (default: 172.16.100.254)
• network1_pool: DHCP address pool for the first LAN (default: 172.16.100.20-172.16.100.200)
• network2: Network for the second LAN (default: 172.16.101.0/24)
• network2_interface: IP address for the second LAN interface (default: 172.16.101.254)
• network2_pool: DHCP address pool for the second LAN (default: 172.16.101.20-172.16.101.200)
• network3: Network for the third LAN (default: 172.16.102.0/24)
• network3_interface: IP address for the third LAN interface (default: 172.16.102.254)
• network3_pool: DHCP address pool for the third LAN (default: 172.16.102.20-172.16.102.200)
• dns_servers: DNS servers to be used by DHCP (default: 8.8.8.8,8.8.4.4)

Usage

Run the playbook using the following command:

ansible-playbook -i inventory.yml miksible.yml

License

This project is licensed under the MIT License. See the LICENSE file for details.

Author

Abolfazl Pahlavanian

You can modify the content as needed to fit your style or any specific instructions for using your playbook. Let me know if you need further assistance!